From: Alexandru Tachici <[email protected]>
Allow user to select the advertised master-slave
configuration through ethtool.
Signed-off-by: Alexandru Tachici <[email protected]>
---
drivers/net/phy/adin1100.c | 78 +++++++++++++++++++++++++++++++++++++-
1 file changed, 77 insertions(+), 1 deletion(-)
diff --git a/drivers/net/phy/adin1100.c b/drivers/net/phy/adin1100.c
index f0674a0e8e8a..a8ddf5a9879a 100644
--- a/drivers/net/phy/adin1100.c
+++ b/drivers/net/phy/adin1100.c
@@ -36,7 +36,11 @@ static const int phy_10_features_array[] = {
#define ADIN_AN_STATUS 0x0201
#define ADIN_AN_ADV_ABILITY_L 0x0202
+#define ADIN_AN_ADV_FORCE_MS BIT(12)
+
#define ADIN_AN_ADV_ABILITY_M 0x0203
+#define ADIN_AN_ADV_MST BIT(4)
+
#define ADIN_AN_ADV_ABILITY_H 0x0204U
#define ADIN_AN_ADV_B10L_TX_LVL_HI_ABL BIT(13)
#define ADIN_AN_ADV_B10L_TX_LVL_HI_REQ BIT(12)
@@ -68,6 +72,10 @@ static const int phy_10_features_array[] = {
#define ADIN_CRSM_SFT_PD_RDY BIT(1)
#define ADIN_CRSM_SYS_RDY BIT(0)
+#define AN_PHY_INST_STATUS 0x8030
+#define ADIN_IS_CFG_SLV BIT(2)
+#define ADIN_IS_CFG_MST BIT(3)
+
#define ADIN_MAC_IF_LOOPBACK 0x803d
#define ADIN_MAC_IF_LOOPBACK_EN BIT(0)
#define ADIN_MAC_IF_REMOTE_LOOPBACK_EN BIT(2)
@@ -203,6 +211,7 @@ static int adin_read_lpa(struct phy_device *phydev)
static int adin_read_status(struct phy_device *phydev)
{
int ret;
+ int cfg;
ret = genphy_c45_read_link(phydev);
if (ret)
@@ -212,6 +221,8 @@ static int adin_read_status(struct phy_device *phydev)
phydev->duplex = DUPLEX_UNKNOWN;
phydev->pause = 0;
phydev->asym_pause = 0;
+ phydev->master_slave_get = MASTER_SLAVE_CFG_UNKNOWN;
+ phydev->master_slave_state = MASTER_SLAVE_STATE_UNKNOWN;
if (phydev->autoneg == AUTONEG_ENABLE) {
ret = adin_read_lpa(phydev);
@@ -226,7 +237,37 @@ static int adin_read_status(struct phy_device *phydev)
phydev->duplex = DUPLEX_FULL;
}
- return ret;
+ ret = phy_read_mmd(phydev, MDIO_MMD_AN, ADIN_AN_ADV_ABILITY_L);
+ if (ret < 0)
+ return ret;
+
+ cfg = phy_read_mmd(phydev, MDIO_MMD_AN, ADIN_AN_ADV_ABILITY_M);
+ if (cfg < 0)
+ return cfg;
+
+ if (ret & ADIN_AN_ADV_FORCE_MS) {
+ if (cfg & ADIN_AN_ADV_MST)
+ phydev->master_slave_get = MASTER_SLAVE_CFG_MASTER_FORCE;
+ else
+ phydev->master_slave_get = MASTER_SLAVE_CFG_SLAVE_FORCE;
+ } else {
+ if (cfg & ADIN_AN_ADV_MST)
+ phydev->master_slave_get = MASTER_SLAVE_CFG_MASTER_PREFERRED;
+ else
+ phydev->master_slave_get = MASTER_SLAVE_CFG_SLAVE_PREFERRED;
+ }
+
+ ret = phy_read_mmd(phydev, MDIO_MMD_AN, AN_PHY_INST_STATUS);
+ if (ret < 0)
+ return ret;
+
+ if (ret & ADIN_IS_CFG_SLV)
+ phydev->master_slave_state = MASTER_SLAVE_STATE_SLAVE;
+
+ if (ret & ADIN_IS_CFG_MST)
+ phydev->master_slave_state = MASTER_SLAVE_STATE_MASTER;
+
+ return 0;
}
static int adin_config_aneg(struct phy_device *phydev)
@@ -240,6 +281,41 @@ static int adin_config_aneg(struct phy_device *phydev)
if (phydev->autoneg == AUTONEG_DISABLE)
return 0;
+ switch (phydev->master_slave_set) {
+ case MASTER_SLAVE_CFG_MASTER_FORCE:
+ case MASTER_SLAVE_CFG_SLAVE_FORCE:
+ ret = phy_set_bits_mmd(phydev, MDIO_MMD_AN, ADIN_AN_ADV_ABILITY_L,
+ ADIN_AN_ADV_FORCE_MS);
+ if (ret < 0)
+ return ret;
+ break;
+ case MASTER_SLAVE_CFG_MASTER_PREFERRED:
+ case MASTER_SLAVE_CFG_SLAVE_PREFERRED:
+ ret = phy_clear_bits_mmd(phydev, MDIO_MMD_AN, ADIN_AN_ADV_ABILITY_L,
+ ADIN_AN_ADV_FORCE_MS);
+ break;
+ default:
+ break;
+ }
+
+ switch (phydev->master_slave_set) {
+ case MASTER_SLAVE_CFG_MASTER_FORCE:
+ case MASTER_SLAVE_CFG_MASTER_PREFERRED:
+ ret = phy_set_bits_mmd(phydev, MDIO_MMD_AN, ADIN_AN_ADV_ABILITY_M, ADIN_AN_ADV_MST);
+ if (ret < 0)
+ return ret;
+ break;
+ case MASTER_SLAVE_CFG_SLAVE_FORCE:
+ case MASTER_SLAVE_CFG_SLAVE_PREFERRED:
+ ret = phy_clear_bits_mmd(phydev, MDIO_MMD_AN, ADIN_AN_ADV_ABILITY_M,
+ ADIN_AN_ADV_MST);
+ if (ret < 0)
+ return ret;
+ break;
+ default:
+ break;
+ }
+
if (priv->tx_level_24v)
ret = phy_set_bits_mmd(phydev, MDIO_MMD_AN,
ADIN_AN_ADV_ABILITY_H,
--
2.25.1