2021-06-24 14:57:18

by Vladimir Oltean

Subject: [PATCH net-next 0/2] Document the NXP SJA1110 switch as supported

From: Vladimir Oltean <[email protected]>

Now that most of the basic work for SJA1110 support has been done in the
sja1105 DSA driver, let's add the missing documentation bits to make it
clear that the driver can be used.

Vladimir Oltean (2):
Documentation: net: dsa: add details about SJA1110
net: dsa: sja1105: document the SJA1110 in the Kconfig

Documentation/networking/dsa/sja1105.rst | 61 ++++++++++++++++++++++--
drivers/net/dsa/sja1105/Kconfig | 8 +++-
2 files changed, 63 insertions(+), 6 deletions(-)

--
2.25.1

2021-06-24 14:57:50

by Vladimir Oltean

Subject: [PATCH net-next 2/2] net: dsa: sja1105: document the SJA1110 in the Kconfig

From: Vladimir Oltean <[email protected]>

Mention support for the SJA1110 in menuconfig.

Signed-off-by: Vladimir Oltean <[email protected]>
---
drivers/net/dsa/sja1105/Kconfig | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/net/dsa/sja1105/Kconfig b/drivers/net/dsa/sja1105/Kconfig
index 8383cd6d2178..b29d41e5e1e7 100644
--- a/drivers/net/dsa/sja1105/Kconfig
+++ b/drivers/net/dsa/sja1105/Kconfig
@@ -7,8 +7,8 @@ tristate "NXP SJA1105 Ethernet switch family support"
select PACKING
select CRC32
help
- This is the driver for the NXP SJA1105 automotive Ethernet switch
- family. These are 5-port devices and are managed over an SPI
+ This is the driver for the NXP SJA1105 (5-port) and SJA1110 (10-port)
+ automotive Ethernet switch family. These are managed over an SPI
interface. Probing is handled based on OF bindings and so is the
linkage to PHYLINK. The driver supports the following revisions:
- SJA1105E (Gen. 1, No TT-Ethernet)
@@ -17,6 +17,10 @@ tristate "NXP SJA1105 Ethernet switch family support"
- SJA1105Q (Gen. 2, No SGMII, TT-Ethernet)
- SJA1105R (Gen. 2, SGMII, No TT-Ethernet)
- SJA1105S (Gen. 2, SGMII, TT-Ethernet)
+ - SJA1110A (Gen. 3, SGMII, TT-Ethernet, 100base-TX PHY, 10 ports)
+ - SJA1110B (Gen. 3, SGMII, TT-Ethernet, 100base-TX PHY, 9 ports)
+ - SJA1110C (Gen. 3, SGMII, TT-Ethernet, 100base-TX PHY, 7 ports)
+ - SJA1110D (Gen. 3, SGMII, TT-Ethernet, no 100base-TX PHY, 7 ports)

config NET_DSA_SJA1105_PTP
bool "Support for the PTP clock on the NXP SJA1105 Ethernet switch"
--
2.25.1

2021-06-24 20:01:42

by patchwork-bot+netdevbpf

Subject: Re: [PATCH net-next 0/2] Document the NXP SJA1110 switch as supported

Hello:

This series was applied to netdev/net-next.git (refs/heads/master):

On Thu, 24 Jun 2021 17:55:22 +0300 you wrote:
> From: Vladimir Oltean <[email protected]>
>
> Now that most of the basic work for SJA1110 support has been done in the
> sja1105 DSA driver, let's add the missing documentation bits to make it
> clear that the driver can be used.
>
> Vladimir Oltean (2):
> Documentation: net: dsa: add details about SJA1110
> net: dsa: sja1105: document the SJA1110 in the Kconfig
>
> [...]

Here is the summary with links:
- [net-next,1/2] Documentation: net: dsa: add details about SJA1110
https://git.kernel.org/netdev/net-next/c/44531076338f
- [net-next,2/2] net: dsa: sja1105: document the SJA1110 in the Kconfig
https://git.kernel.org/netdev/net-next/c/75e994709f8a

You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html