There's no reason to have "status" properties in examples. "okay" is the
default, and "disabled" turns off some schema checks ('required'
specifically).
Enabling qca,ar71xx causes a warning, so let's fix the node names:
Documentation/devicetree/bindings/net/qca,ar71xx.example.dt.yaml: phy@3: '#phy-cells' is a required property
From schema: schemas/phy/phy-provider.yaml
Cc: Maxime Ripard <[email protected]>
Cc: Chen-Yu Tsai <[email protected]>
Cc: Thierry Reding <[email protected]>
Cc: Sam Ravnborg <[email protected]>
Cc: Rui Miguel Silva <[email protected]>
Cc: Laurent Pinchart <[email protected]>
Cc: Mauro Carvalho Chehab <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Jakub Kicinski <[email protected]>
Cc: Mark Brown <[email protected]>
Cc: Robert Marko <[email protected]>
Cc: Philipp Zabel <[email protected]>
Cc: Alessandro Zummo <[email protected]>
Cc: Alexandre Belloni <[email protected]>
Cc: Ramesh Shanmugasundaram <[email protected]>
Cc: "G. Jaya Kumaran" <[email protected]>
Cc: Linus Walleij <[email protected]>
Cc: Oleksij Rempel <[email protected]>
Cc: ChiYuan Huang <[email protected]>
Cc: Wei Xu <[email protected]>
Cc: Dilip Kota <[email protected]>
Cc: Karol Gugala <[email protected]>
Cc: Mateusz Holenko <[email protected]>
Cc: Olivier Moysan <[email protected]>
Cc: Peter Ujfalusi <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Rob Herring <[email protected]>
---
.../display/allwinner,sun8i-a83t-dw-hdmi.yaml | 2 --
.../display/panel/boe,tv101wum-nl6.yaml | 1 -
.../bindings/media/nxp,imx7-mipi-csi2.yaml | 2 --
.../bindings/media/renesas,drif.yaml | 1 -
.../bindings/net/intel,dwmac-plat.yaml | 2 --
.../bindings/net/intel,ixp4xx-ethernet.yaml | 2 --
.../bindings/net/nfc/samsung,s3fwrn5.yaml | 3 ---
.../devicetree/bindings/net/qca,ar71xx.yaml | 25 ++++---------------
.../regulator/richtek,rt6245-regulator.yaml | 1 -
.../regulator/vqmmc-ipq4019-regulator.yaml | 1 -
.../reset/hisilicon,hi3660-reset.yaml | 1 -
.../bindings/reset/intel,rcu-gw.yaml | 1 -
.../bindings/rtc/microcrystal,rv3032.yaml | 1 -
.../soc/litex/litex,soc-controller.yaml | 1 -
.../bindings/sound/st,stm32-sai.yaml | 2 --
.../bindings/sound/ti,j721e-cpb-audio.yaml | 2 --
.../sound/ti,j721e-cpb-ivi-audio.yaml | 2 --
17 files changed, 5 insertions(+), 45 deletions(-)
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
index 5d42d36608d9..4951b5ef5c6a 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
@@ -174,7 +174,6 @@ examples:
phy-names = "phy";
pinctrl-names = "default";
pinctrl-0 = <&hdmi_pins>;
- status = "disabled";
ports {
#address-cells = <1>;
@@ -233,7 +232,6 @@ examples:
phy-names = "phy";
pinctrl-names = "default";
pinctrl-0 = <&hdmi_pins>;
- status = "disabled";
ports {
#address-cells = <1>;
diff --git a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml
index 38bc1d1b511e..b87a2e28c866 100644
--- a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml
+++ b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml
@@ -70,7 +70,6 @@ examples:
avee-supply = <&ppvarp_lcd>;
pp1800-supply = <&pp1800_lcd>;
backlight = <&backlight_lcd0>;
- status = "okay";
port {
panel_in: endpoint {
remote-endpoint = <&dsi_out>;
diff --git a/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
index 7c09eec78ce5..877183cf4278 100644
--- a/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
+++ b/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
@@ -200,8 +200,6 @@ examples:
clock-names = "pclk", "wrap", "phy", "axi";
power-domains = <&mipi_pd>;
- status = "disabled";
-
ports {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/media/renesas,drif.yaml b/Documentation/devicetree/bindings/media/renesas,drif.yaml
index 2867d11fe156..9403b235e976 100644
--- a/Documentation/devicetree/bindings/media/renesas,drif.yaml
+++ b/Documentation/devicetree/bindings/media/renesas,drif.yaml
@@ -242,7 +242,6 @@ examples:
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
resets = <&cpg 513>;
renesas,bonding = <&drif11>;
- status = "disabled";
};
drif11: rif@e6f70000 {
diff --git a/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml b/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml
index c1948ce00081..79fa04f5e40d 100644
--- a/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml
+++ b/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml
@@ -116,8 +116,6 @@ examples:
snps,mtl-rx-config = <&mtl_rx_setup>;
snps,mtl-tx-config = <&mtl_tx_setup>;
snps,tso;
- status = "okay";
-
mdio0 {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml b/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml
index f2e91d1bf7d7..378ed2d3b003 100644
--- a/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml
+++ b/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml
@@ -71,7 +71,6 @@ examples:
ethernet@c8009000 {
compatible = "intel,ixp4xx-ethernet";
reg = <0xc8009000 0x1000>;
- status = "disabled";
queue-rx = <&qmgr 4>;
queue-txready = <&qmgr 21>;
intel,npe-handle = <&npe 1>;
@@ -82,7 +81,6 @@ examples:
ethernet@c800c000 {
compatible = "intel,ixp4xx-ethernet";
reg = <0xc800c000 0x1000>;
- status = "disabled";
queue-rx = <&qmgr 3>;
queue-txready = <&qmgr 20>;
intel,npe-handle = <&npe 2>;
diff --git a/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml b/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
index 081742c2b726..64995cbb0f97 100644
--- a/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
+++ b/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
@@ -90,14 +90,11 @@ examples:
# UART example on Raspberry Pi
- |
uart0 {
- status = "okay";
-
nfc {
compatible = "samsung,s3fwrn82";
en-gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
wake-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
- status = "okay";
};
};
diff --git a/Documentation/devicetree/bindings/net/qca,ar71xx.yaml b/Documentation/devicetree/bindings/net/qca,ar71xx.yaml
index f0db22645d73..cf4d35edaa1b 100644
--- a/Documentation/devicetree/bindings/net/qca,ar71xx.yaml
+++ b/Documentation/devicetree/bindings/net/qca,ar71xx.yaml
@@ -101,8 +101,6 @@ examples:
phy-mode = "gmii";
- status = "disabled";
-
fixed-link {
speed = <1000>;
full-duplex;
@@ -148,32 +146,24 @@ examples:
reg = <0x1>;
phy-handle = <&phy_port0>;
phy-mode = "internal";
-
- status = "disabled";
};
switch_port2: port@2 {
reg = <0x2>;
phy-handle = <&phy_port1>;
phy-mode = "internal";
-
- status = "disabled";
};
switch_port3: port@3 {
reg = <0x3>;
phy-handle = <&phy_port2>;
phy-mode = "internal";
-
- status = "disabled";
};
switch_port4: port@4 {
reg = <0x4>;
phy-handle = <&phy_port3>;
phy-mode = "internal";
-
- status = "disabled";
};
};
@@ -183,34 +173,29 @@ examples:
interrupt-parent = <&switch10>;
- phy_port0: phy@0 {
+ phy_port0: ethernet-phy@0 {
reg = <0x0>;
interrupts = <0>;
- status = "disabled";
};
- phy_port1: phy@1 {
+ phy_port1: ethernet-phy@1 {
reg = <0x1>;
interrupts = <0>;
- status = "disabled";
};
- phy_port2: phy@2 {
+ phy_port2: ethernet-phy@2 {
reg = <0x2>;
interrupts = <0>;
- status = "disabled";
};
- phy_port3: phy@3 {
+ phy_port3: ethernet-phy@3 {
reg = <0x3>;
interrupts = <0>;
- status = "disabled";
};
- phy_port4: phy@4 {
+ phy_port4: ethernet-phy@4 {
reg = <0x4>;
interrupts = <0>;
- status = "disabled";
};
};
};
diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml
index 796ceac87445..e983d0e70c9b 100644
--- a/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml
@@ -77,7 +77,6 @@ examples:
rt6245@34 {
compatible = "richtek,rt6245";
- status = "okay";
reg = <0x34>;
enable-gpios = <&gpio26 2 0>;
diff --git a/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml b/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml
index 6f45582c914e..dd7a2f92634c 100644
--- a/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml
@@ -39,6 +39,5 @@ examples:
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <3000000>;
regulator-always-on;
- status = "disabled";
};
...
diff --git a/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml b/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml
index 9bf40952e5b7..b0c41ab1a746 100644
--- a/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml
+++ b/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml
@@ -72,6 +72,5 @@ examples:
resets = <&iomcu_rst 0x20 3>;
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pmx_func &i2c0_cfg_func>;
- status = "disabled";
};
...
diff --git a/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml b/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml
index 6b2d56cc3f38..13bf6bb3f097 100644
--- a/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml
+++ b/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml
@@ -57,7 +57,6 @@ examples:
};
pwm: pwm@e0d00000 {
- status = "disabled";
compatible = "intel,lgm-pwm";
reg = <0xe0d00000 0x30>;
clocks = <&cgu0 1>;
diff --git a/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml b/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml
index a2c55303810d..9593840a4a2b 100644
--- a/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml
+++ b/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml
@@ -53,7 +53,6 @@ examples:
rtc@51 {
compatible = "microcrystal,rv3032";
reg = <0x51>;
- status = "okay";
pinctrl-0 = <&rtc_nint_pins>;
interrupts-extended = <&gpio1 16 IRQ_TYPE_LEVEL_HIGH>;
trickle-resistor-ohms = <7000>;
diff --git a/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml b/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml
index c8b57c7fd08c..ecae9fa8561b 100644
--- a/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml
+++ b/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml
@@ -35,7 +35,6 @@ examples:
soc_ctrl0: soc-controller@f0000000 {
compatible = "litex,soc-controller";
reg = <0xf0000000 0xc>;
- status = "okay";
};
...
diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
index 06e83461705c..f97132400bb6 100644
--- a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
+++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
@@ -180,7 +180,6 @@ examples:
pinctrl-names = "default", "sleep";
pinctrl-0 = <&sai2a_pins_a>, <&sai2b_pins_b>;
pinctrl-1 = <&sai2a_sleep_pins_a>, <&sai2b_sleep_pins_b>;
- status = "okay";
sai2a: audio-controller@4400b004 {
#sound-dai-cells = <0>;
@@ -190,7 +189,6 @@ examples:
dma-names = "tx";
clocks = <&rcc SAI2_K>;
clock-names = "sai_ck";
- status = "okay";
};
};
diff --git a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml
index ec06789b21df..6806f53a4aed 100644
--- a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml
+++ b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml
@@ -127,8 +127,6 @@ examples:
compatible = "ti,j721e-cpb-audio";
model = "j721e-cpb";
- status = "okay";
-
ti,cpb-mcasp = <&mcasp10>;
ti,cpb-codec = <&pcm3168a_1>;
diff --git a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml
index ee9f960de36b..859d369c71e2 100644
--- a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml
+++ b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml
@@ -119,8 +119,6 @@ examples:
compatible = "ti,j721e-cpb-ivi-audio";
model = "j721e-cpb-ivi";
- status = "okay";
-
ti,cpb-mcasp = <&mcasp10>;
ti,cpb-codec = <&pcm3168a_1>;
--
2.27.0
Em Tue, 20 Jul 2021 11:20:25 -0600
Rob Herring <[email protected]> escreveu:
> There's no reason to have "status" properties in examples. "okay" is the
> default, and "disabled" turns off some schema checks ('required'
> specifically).
>
> Enabling qca,ar71xx causes a warning, so let's fix the node names:
>
> Documentation/devicetree/bindings/net/qca,ar71xx.example.dt.yaml: phy@3: '#phy-cells' is a required property
> From schema: schemas/phy/phy-provider.yaml
>
> Cc: Maxime Ripard <[email protected]>
> Cc: Chen-Yu Tsai <[email protected]>
> Cc: Thierry Reding <[email protected]>
> Cc: Sam Ravnborg <[email protected]>
> Cc: Rui Miguel Silva <[email protected]>
> Cc: Laurent Pinchart <[email protected]>
> Cc: Mauro Carvalho Chehab <[email protected]>
> Cc: "David S. Miller" <[email protected]>
> Cc: Jakub Kicinski <[email protected]>
> Cc: Mark Brown <[email protected]>
> Cc: Robert Marko <[email protected]>
> Cc: Philipp Zabel <[email protected]>
> Cc: Alessandro Zummo <[email protected]>
> Cc: Alexandre Belloni <[email protected]>
> Cc: Ramesh Shanmugasundaram <[email protected]>
> Cc: "G. Jaya Kumaran" <[email protected]>
> Cc: Linus Walleij <[email protected]>
> Cc: Oleksij Rempel <[email protected]>
> Cc: ChiYuan Huang <[email protected]>
> Cc: Wei Xu <[email protected]>
> Cc: Dilip Kota <[email protected]>
> Cc: Karol Gugala <[email protected]>
> Cc: Mateusz Holenko <[email protected]>
> Cc: Olivier Moysan <[email protected]>
> Cc: Peter Ujfalusi <[email protected]>
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Signed-off-by: Rob Herring <[email protected]>
> ---
> .../display/allwinner,sun8i-a83t-dw-hdmi.yaml | 2 --
> .../display/panel/boe,tv101wum-nl6.yaml | 1 -
> .../bindings/media/nxp,imx7-mipi-csi2.yaml | 2 --
> .../bindings/media/renesas,drif.yaml | 1 -
Reviewed-by: Mauro Carvalho Chehab <[email protected]> # For media
Thanks,
Mauro
Hi Rob,
Thank you for the patch.
On Tue, Jul 20, 2021 at 11:20:25AM -0600, Rob Herring wrote:
> There's no reason to have "status" properties in examples. "okay" is the
> default, and "disabled" turns off some schema checks ('required'
> specifically).
>
> Enabling qca,ar71xx causes a warning, so let's fix the node names:
>
> Documentation/devicetree/bindings/net/qca,ar71xx.example.dt.yaml: phy@3: '#phy-cells' is a required property
> From schema: schemas/phy/phy-provider.yaml
>
> Cc: Maxime Ripard <[email protected]>
> Cc: Chen-Yu Tsai <[email protected]>
> Cc: Thierry Reding <[email protected]>
> Cc: Sam Ravnborg <[email protected]>
> Cc: Rui Miguel Silva <[email protected]>
> Cc: Laurent Pinchart <[email protected]>
> Cc: Mauro Carvalho Chehab <[email protected]>
> Cc: "David S. Miller" <[email protected]>
> Cc: Jakub Kicinski <[email protected]>
> Cc: Mark Brown <[email protected]>
> Cc: Robert Marko <[email protected]>
> Cc: Philipp Zabel <[email protected]>
> Cc: Alessandro Zummo <[email protected]>
> Cc: Alexandre Belloni <[email protected]>
> Cc: Ramesh Shanmugasundaram <[email protected]>
> Cc: "G. Jaya Kumaran" <[email protected]>
> Cc: Linus Walleij <[email protected]>
> Cc: Oleksij Rempel <[email protected]>
> Cc: ChiYuan Huang <[email protected]>
> Cc: Wei Xu <[email protected]>
> Cc: Dilip Kota <[email protected]>
> Cc: Karol Gugala <[email protected]>
> Cc: Mateusz Holenko <[email protected]>
> Cc: Olivier Moysan <[email protected]>
> Cc: Peter Ujfalusi <[email protected]>
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Signed-off-by: Rob Herring <[email protected]>
> ---
> .../display/allwinner,sun8i-a83t-dw-hdmi.yaml | 2 --
> .../display/panel/boe,tv101wum-nl6.yaml | 1 -
> .../bindings/media/nxp,imx7-mipi-csi2.yaml | 2 --
> .../bindings/media/renesas,drif.yaml | 1 -
> .../bindings/net/intel,dwmac-plat.yaml | 2 --
> .../bindings/net/intel,ixp4xx-ethernet.yaml | 2 --
> .../bindings/net/nfc/samsung,s3fwrn5.yaml | 3 ---
> .../devicetree/bindings/net/qca,ar71xx.yaml | 25 ++++---------------
> .../regulator/richtek,rt6245-regulator.yaml | 1 -
> .../regulator/vqmmc-ipq4019-regulator.yaml | 1 -
> .../reset/hisilicon,hi3660-reset.yaml | 1 -
> .../bindings/reset/intel,rcu-gw.yaml | 1 -
> .../bindings/rtc/microcrystal,rv3032.yaml | 1 -
> .../soc/litex/litex,soc-controller.yaml | 1 -
> .../bindings/sound/st,stm32-sai.yaml | 2 --
> .../bindings/sound/ti,j721e-cpb-audio.yaml | 2 --
> .../sound/ti,j721e-cpb-ivi-audio.yaml | 2 --
> 17 files changed, 5 insertions(+), 45 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
> index 5d42d36608d9..4951b5ef5c6a 100644
> --- a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
> +++ b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
> @@ -174,7 +174,6 @@ examples:
> phy-names = "phy";
> pinctrl-names = "default";
> pinctrl-0 = <&hdmi_pins>;
> - status = "disabled";
>
> ports {
> #address-cells = <1>;
> @@ -233,7 +232,6 @@ examples:
> phy-names = "phy";
> pinctrl-names = "default";
> pinctrl-0 = <&hdmi_pins>;
> - status = "disabled";
>
> ports {
> #address-cells = <1>;
> diff --git a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml
> index 38bc1d1b511e..b87a2e28c866 100644
> --- a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml
> +++ b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml
> @@ -70,7 +70,6 @@ examples:
> avee-supply = <&ppvarp_lcd>;
> pp1800-supply = <&pp1800_lcd>;
> backlight = <&backlight_lcd0>;
> - status = "okay";
> port {
> panel_in: endpoint {
> remote-endpoint = <&dsi_out>;
> diff --git a/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
> index 7c09eec78ce5..877183cf4278 100644
> --- a/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
> +++ b/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
> @@ -200,8 +200,6 @@ examples:
> clock-names = "pclk", "wrap", "phy", "axi";
> power-domains = <&mipi_pd>;
>
> - status = "disabled";
> -
> ports {
> #address-cells = <1>;
> #size-cells = <0>;
> diff --git a/Documentation/devicetree/bindings/media/renesas,drif.yaml b/Documentation/devicetree/bindings/media/renesas,drif.yaml
> index 2867d11fe156..9403b235e976 100644
> --- a/Documentation/devicetree/bindings/media/renesas,drif.yaml
> +++ b/Documentation/devicetree/bindings/media/renesas,drif.yaml
> @@ -242,7 +242,6 @@ examples:
> power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
> resets = <&cpg 513>;
> renesas,bonding = <&drif11>;
> - status = "disabled";
> };
>
> drif11: rif@e6f70000 {
> diff --git a/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml b/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml
> index c1948ce00081..79fa04f5e40d 100644
> --- a/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml
> +++ b/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml
> @@ -116,8 +116,6 @@ examples:
> snps,mtl-rx-config = <&mtl_rx_setup>;
> snps,mtl-tx-config = <&mtl_tx_setup>;
> snps,tso;
> - status = "okay";
> -
I would have kept the blank line here.
Reviewed-by: Laurent Pinchart <[email protected]>
> mdio0 {
> #address-cells = <1>;
> #size-cells = <0>;
> diff --git a/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml b/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml
> index f2e91d1bf7d7..378ed2d3b003 100644
> --- a/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml
> +++ b/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml
> @@ -71,7 +71,6 @@ examples:
> ethernet@c8009000 {
> compatible = "intel,ixp4xx-ethernet";
> reg = <0xc8009000 0x1000>;
> - status = "disabled";
> queue-rx = <&qmgr 4>;
> queue-txready = <&qmgr 21>;
> intel,npe-handle = <&npe 1>;
> @@ -82,7 +81,6 @@ examples:
> ethernet@c800c000 {
> compatible = "intel,ixp4xx-ethernet";
> reg = <0xc800c000 0x1000>;
> - status = "disabled";
> queue-rx = <&qmgr 3>;
> queue-txready = <&qmgr 20>;
> intel,npe-handle = <&npe 2>;
> diff --git a/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml b/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
> index 081742c2b726..64995cbb0f97 100644
> --- a/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
> +++ b/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
> @@ -90,14 +90,11 @@ examples:
> # UART example on Raspberry Pi
> - |
> uart0 {
> - status = "okay";
> -
> nfc {
> compatible = "samsung,s3fwrn82";
>
> en-gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
> wake-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
>
> - status = "okay";
> };
> };
> diff --git a/Documentation/devicetree/bindings/net/qca,ar71xx.yaml b/Documentation/devicetree/bindings/net/qca,ar71xx.yaml
> index f0db22645d73..cf4d35edaa1b 100644
> --- a/Documentation/devicetree/bindings/net/qca,ar71xx.yaml
> +++ b/Documentation/devicetree/bindings/net/qca,ar71xx.yaml
> @@ -101,8 +101,6 @@ examples:
>
> phy-mode = "gmii";
>
> - status = "disabled";
> -
> fixed-link {
> speed = <1000>;
> full-duplex;
> @@ -148,32 +146,24 @@ examples:
> reg = <0x1>;
> phy-handle = <&phy_port0>;
> phy-mode = "internal";
> -
> - status = "disabled";
> };
>
> switch_port2: port@2 {
> reg = <0x2>;
> phy-handle = <&phy_port1>;
> phy-mode = "internal";
> -
> - status = "disabled";
> };
>
> switch_port3: port@3 {
> reg = <0x3>;
> phy-handle = <&phy_port2>;
> phy-mode = "internal";
> -
> - status = "disabled";
> };
>
> switch_port4: port@4 {
> reg = <0x4>;
> phy-handle = <&phy_port3>;
> phy-mode = "internal";
> -
> - status = "disabled";
> };
> };
>
> @@ -183,34 +173,29 @@ examples:
>
> interrupt-parent = <&switch10>;
>
> - phy_port0: phy@0 {
> + phy_port0: ethernet-phy@0 {
> reg = <0x0>;
> interrupts = <0>;
> - status = "disabled";
> };
>
> - phy_port1: phy@1 {
> + phy_port1: ethernet-phy@1 {
> reg = <0x1>;
> interrupts = <0>;
> - status = "disabled";
> };
>
> - phy_port2: phy@2 {
> + phy_port2: ethernet-phy@2 {
> reg = <0x2>;
> interrupts = <0>;
> - status = "disabled";
> };
>
> - phy_port3: phy@3 {
> + phy_port3: ethernet-phy@3 {
> reg = <0x3>;
> interrupts = <0>;
> - status = "disabled";
> };
>
> - phy_port4: phy@4 {
> + phy_port4: ethernet-phy@4 {
> reg = <0x4>;
> interrupts = <0>;
> - status = "disabled";
> };
> };
> };
> diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml
> index 796ceac87445..e983d0e70c9b 100644
> --- a/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml
> +++ b/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml
> @@ -77,7 +77,6 @@ examples:
>
> rt6245@34 {
> compatible = "richtek,rt6245";
> - status = "okay";
> reg = <0x34>;
> enable-gpios = <&gpio26 2 0>;
>
> diff --git a/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml b/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml
> index 6f45582c914e..dd7a2f92634c 100644
> --- a/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml
> +++ b/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml
> @@ -39,6 +39,5 @@ examples:
> regulator-min-microvolt = <1500000>;
> regulator-max-microvolt = <3000000>;
> regulator-always-on;
> - status = "disabled";
> };
> ...
> diff --git a/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml b/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml
> index 9bf40952e5b7..b0c41ab1a746 100644
> --- a/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml
> +++ b/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml
> @@ -72,6 +72,5 @@ examples:
> resets = <&iomcu_rst 0x20 3>;
> pinctrl-names = "default";
> pinctrl-0 = <&i2c0_pmx_func &i2c0_cfg_func>;
> - status = "disabled";
> };
> ...
> diff --git a/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml b/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml
> index 6b2d56cc3f38..13bf6bb3f097 100644
> --- a/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml
> +++ b/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml
> @@ -57,7 +57,6 @@ examples:
> };
>
> pwm: pwm@e0d00000 {
> - status = "disabled";
> compatible = "intel,lgm-pwm";
> reg = <0xe0d00000 0x30>;
> clocks = <&cgu0 1>;
> diff --git a/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml b/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml
> index a2c55303810d..9593840a4a2b 100644
> --- a/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml
> +++ b/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml
> @@ -53,7 +53,6 @@ examples:
> rtc@51 {
> compatible = "microcrystal,rv3032";
> reg = <0x51>;
> - status = "okay";
> pinctrl-0 = <&rtc_nint_pins>;
> interrupts-extended = <&gpio1 16 IRQ_TYPE_LEVEL_HIGH>;
> trickle-resistor-ohms = <7000>;
> diff --git a/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml b/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml
> index c8b57c7fd08c..ecae9fa8561b 100644
> --- a/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml
> +++ b/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml
> @@ -35,7 +35,6 @@ examples:
> soc_ctrl0: soc-controller@f0000000 {
> compatible = "litex,soc-controller";
> reg = <0xf0000000 0xc>;
> - status = "okay";
> };
>
> ...
> diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
> index 06e83461705c..f97132400bb6 100644
> --- a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
> +++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
> @@ -180,7 +180,6 @@ examples:
> pinctrl-names = "default", "sleep";
> pinctrl-0 = <&sai2a_pins_a>, <&sai2b_pins_b>;
> pinctrl-1 = <&sai2a_sleep_pins_a>, <&sai2b_sleep_pins_b>;
> - status = "okay";
>
> sai2a: audio-controller@4400b004 {
> #sound-dai-cells = <0>;
> @@ -190,7 +189,6 @@ examples:
> dma-names = "tx";
> clocks = <&rcc SAI2_K>;
> clock-names = "sai_ck";
> - status = "okay";
> };
> };
>
> diff --git a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml
> index ec06789b21df..6806f53a4aed 100644
> --- a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml
> +++ b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml
> @@ -127,8 +127,6 @@ examples:
> compatible = "ti,j721e-cpb-audio";
> model = "j721e-cpb";
>
> - status = "okay";
> -
> ti,cpb-mcasp = <&mcasp10>;
> ti,cpb-codec = <&pcm3168a_1>;
>
> diff --git a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml
> index ee9f960de36b..859d369c71e2 100644
> --- a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml
> +++ b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml
> @@ -119,8 +119,6 @@ examples:
> compatible = "ti,j721e-cpb-ivi-audio";
> model = "j721e-cpb-ivi";
>
> - status = "okay";
> -
> ti,cpb-mcasp = <&mcasp10>;
> ti,cpb-codec = <&pcm3168a_1>;
>
--
Regards,
Laurent Pinchart
On Tue Jul 20, 2021 at 6:20 PM WEST, Rob Herring wrote:
> There's no reason to have "status" properties in examples. "okay" is the
> default, and "disabled" turns off some schema checks ('required'
> specifically).
>
> Enabling qca,ar71xx causes a warning, so let's fix the node names:
>
> Documentation/devicetree/bindings/net/qca,ar71xx.example.dt.yaml: phy@3: '#phy-cells' is a required property
> From schema: schemas/phy/phy-provider.yaml
>
> Cc: Maxime Ripard <[email protected]>
> Cc: Chen-Yu Tsai <[email protected]>
> Cc: Thierry Reding <[email protected]>
> Cc: Sam Ravnborg <[email protected]>
> Cc: Rui Miguel Silva <[email protected]>
> Cc: Laurent Pinchart <[email protected]>
> Cc: Mauro Carvalho Chehab <[email protected]>
> Cc: "David S. Miller" <[email protected]>
> Cc: Jakub Kicinski <[email protected]>
> Cc: Mark Brown <[email protected]>
> Cc: Robert Marko <[email protected]>
> Cc: Philipp Zabel <[email protected]>
> Cc: Alessandro Zummo <[email protected]>
> Cc: Alexandre Belloni <[email protected]>
> Cc: Ramesh Shanmugasundaram <[email protected]>
> Cc: "G. Jaya Kumaran" <[email protected]>
> Cc: Linus Walleij <[email protected]>
> Cc: Oleksij Rempel <[email protected]>
> Cc: ChiYuan Huang <[email protected]>
> Cc: Wei Xu <[email protected]>
> Cc: Dilip Kota <[email protected]>
> Cc: Karol Gugala <[email protected]>
> Cc: Mateusz Holenko <[email protected]>
> Cc: Olivier Moysan <[email protected]>
> Cc: Peter Ujfalusi <[email protected]>
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Signed-off-by: Rob Herring <[email protected]>
> ---
> .../display/allwinner,sun8i-a83t-dw-hdmi.yaml | 2 --
> .../display/panel/boe,tv101wum-nl6.yaml | 1 -
> .../bindings/media/nxp,imx7-mipi-csi2.yaml | 2 --
Reviewed-by: Rui Miguel Silva <[email protected]>
Cheers,
Rui
On 20/07/2021 11:20:25-0600, Rob Herring wrote:
> There's no reason to have "status" properties in examples. "okay" is the
> default, and "disabled" turns off some schema checks ('required'
> specifically).
>
> Enabling qca,ar71xx causes a warning, so let's fix the node names:
>
> Documentation/devicetree/bindings/net/qca,ar71xx.example.dt.yaml: phy@3: '#phy-cells' is a required property
> From schema: schemas/phy/phy-provider.yaml
>
> Cc: Maxime Ripard <[email protected]>
> Cc: Chen-Yu Tsai <[email protected]>
> Cc: Thierry Reding <[email protected]>
> Cc: Sam Ravnborg <[email protected]>
> Cc: Rui Miguel Silva <[email protected]>
> Cc: Laurent Pinchart <[email protected]>
> Cc: Mauro Carvalho Chehab <[email protected]>
> Cc: "David S. Miller" <[email protected]>
> Cc: Jakub Kicinski <[email protected]>
> Cc: Mark Brown <[email protected]>
> Cc: Robert Marko <[email protected]>
> Cc: Philipp Zabel <[email protected]>
> Cc: Alessandro Zummo <[email protected]>
> Cc: Alexandre Belloni <[email protected]>
> Cc: Ramesh Shanmugasundaram <[email protected]>
> Cc: "G. Jaya Kumaran" <[email protected]>
> Cc: Linus Walleij <[email protected]>
> Cc: Oleksij Rempel <[email protected]>
> Cc: ChiYuan Huang <[email protected]>
> Cc: Wei Xu <[email protected]>
> Cc: Dilip Kota <[email protected]>
> Cc: Karol Gugala <[email protected]>
> Cc: Mateusz Holenko <[email protected]>
> Cc: Olivier Moysan <[email protected]>
> Cc: Peter Ujfalusi <[email protected]>
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Signed-off-by: Rob Herring <[email protected]>
Acked-by: Alexandre Belloni <[email protected]>
> ---
> .../display/allwinner,sun8i-a83t-dw-hdmi.yaml | 2 --
> .../display/panel/boe,tv101wum-nl6.yaml | 1 -
> .../bindings/media/nxp,imx7-mipi-csi2.yaml | 2 --
> .../bindings/media/renesas,drif.yaml | 1 -
> .../bindings/net/intel,dwmac-plat.yaml | 2 --
> .../bindings/net/intel,ixp4xx-ethernet.yaml | 2 --
> .../bindings/net/nfc/samsung,s3fwrn5.yaml | 3 ---
> .../devicetree/bindings/net/qca,ar71xx.yaml | 25 ++++---------------
> .../regulator/richtek,rt6245-regulator.yaml | 1 -
> .../regulator/vqmmc-ipq4019-regulator.yaml | 1 -
> .../reset/hisilicon,hi3660-reset.yaml | 1 -
> .../bindings/reset/intel,rcu-gw.yaml | 1 -
> .../bindings/rtc/microcrystal,rv3032.yaml | 1 -
> .../soc/litex/litex,soc-controller.yaml | 1 -
> .../bindings/sound/st,stm32-sai.yaml | 2 --
> .../bindings/sound/ti,j721e-cpb-audio.yaml | 2 --
> .../sound/ti,j721e-cpb-ivi-audio.yaml | 2 --
> 17 files changed, 5 insertions(+), 45 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
> index 5d42d36608d9..4951b5ef5c6a 100644
> --- a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
> +++ b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
> @@ -174,7 +174,6 @@ examples:
> phy-names = "phy";
> pinctrl-names = "default";
> pinctrl-0 = <&hdmi_pins>;
> - status = "disabled";
>
> ports {
> #address-cells = <1>;
> @@ -233,7 +232,6 @@ examples:
> phy-names = "phy";
> pinctrl-names = "default";
> pinctrl-0 = <&hdmi_pins>;
> - status = "disabled";
>
> ports {
> #address-cells = <1>;
> diff --git a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml
> index 38bc1d1b511e..b87a2e28c866 100644
> --- a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml
> +++ b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml
> @@ -70,7 +70,6 @@ examples:
> avee-supply = <&ppvarp_lcd>;
> pp1800-supply = <&pp1800_lcd>;
> backlight = <&backlight_lcd0>;
> - status = "okay";
> port {
> panel_in: endpoint {
> remote-endpoint = <&dsi_out>;
> diff --git a/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
> index 7c09eec78ce5..877183cf4278 100644
> --- a/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
> +++ b/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
> @@ -200,8 +200,6 @@ examples:
> clock-names = "pclk", "wrap", "phy", "axi";
> power-domains = <&mipi_pd>;
>
> - status = "disabled";
> -
> ports {
> #address-cells = <1>;
> #size-cells = <0>;
> diff --git a/Documentation/devicetree/bindings/media/renesas,drif.yaml b/Documentation/devicetree/bindings/media/renesas,drif.yaml
> index 2867d11fe156..9403b235e976 100644
> --- a/Documentation/devicetree/bindings/media/renesas,drif.yaml
> +++ b/Documentation/devicetree/bindings/media/renesas,drif.yaml
> @@ -242,7 +242,6 @@ examples:
> power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
> resets = <&cpg 513>;
> renesas,bonding = <&drif11>;
> - status = "disabled";
> };
>
> drif11: rif@e6f70000 {
> diff --git a/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml b/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml
> index c1948ce00081..79fa04f5e40d 100644
> --- a/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml
> +++ b/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml
> @@ -116,8 +116,6 @@ examples:
> snps,mtl-rx-config = <&mtl_rx_setup>;
> snps,mtl-tx-config = <&mtl_tx_setup>;
> snps,tso;
> - status = "okay";
> -
> mdio0 {
> #address-cells = <1>;
> #size-cells = <0>;
> diff --git a/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml b/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml
> index f2e91d1bf7d7..378ed2d3b003 100644
> --- a/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml
> +++ b/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml
> @@ -71,7 +71,6 @@ examples:
> ethernet@c8009000 {
> compatible = "intel,ixp4xx-ethernet";
> reg = <0xc8009000 0x1000>;
> - status = "disabled";
> queue-rx = <&qmgr 4>;
> queue-txready = <&qmgr 21>;
> intel,npe-handle = <&npe 1>;
> @@ -82,7 +81,6 @@ examples:
> ethernet@c800c000 {
> compatible = "intel,ixp4xx-ethernet";
> reg = <0xc800c000 0x1000>;
> - status = "disabled";
> queue-rx = <&qmgr 3>;
> queue-txready = <&qmgr 20>;
> intel,npe-handle = <&npe 2>;
> diff --git a/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml b/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
> index 081742c2b726..64995cbb0f97 100644
> --- a/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
> +++ b/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
> @@ -90,14 +90,11 @@ examples:
> # UART example on Raspberry Pi
> - |
> uart0 {
> - status = "okay";
> -
> nfc {
> compatible = "samsung,s3fwrn82";
>
> en-gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
> wake-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
>
> - status = "okay";
> };
> };
> diff --git a/Documentation/devicetree/bindings/net/qca,ar71xx.yaml b/Documentation/devicetree/bindings/net/qca,ar71xx.yaml
> index f0db22645d73..cf4d35edaa1b 100644
> --- a/Documentation/devicetree/bindings/net/qca,ar71xx.yaml
> +++ b/Documentation/devicetree/bindings/net/qca,ar71xx.yaml
> @@ -101,8 +101,6 @@ examples:
>
> phy-mode = "gmii";
>
> - status = "disabled";
> -
> fixed-link {
> speed = <1000>;
> full-duplex;
> @@ -148,32 +146,24 @@ examples:
> reg = <0x1>;
> phy-handle = <&phy_port0>;
> phy-mode = "internal";
> -
> - status = "disabled";
> };
>
> switch_port2: port@2 {
> reg = <0x2>;
> phy-handle = <&phy_port1>;
> phy-mode = "internal";
> -
> - status = "disabled";
> };
>
> switch_port3: port@3 {
> reg = <0x3>;
> phy-handle = <&phy_port2>;
> phy-mode = "internal";
> -
> - status = "disabled";
> };
>
> switch_port4: port@4 {
> reg = <0x4>;
> phy-handle = <&phy_port3>;
> phy-mode = "internal";
> -
> - status = "disabled";
> };
> };
>
> @@ -183,34 +173,29 @@ examples:
>
> interrupt-parent = <&switch10>;
>
> - phy_port0: phy@0 {
> + phy_port0: ethernet-phy@0 {
> reg = <0x0>;
> interrupts = <0>;
> - status = "disabled";
> };
>
> - phy_port1: phy@1 {
> + phy_port1: ethernet-phy@1 {
> reg = <0x1>;
> interrupts = <0>;
> - status = "disabled";
> };
>
> - phy_port2: phy@2 {
> + phy_port2: ethernet-phy@2 {
> reg = <0x2>;
> interrupts = <0>;
> - status = "disabled";
> };
>
> - phy_port3: phy@3 {
> + phy_port3: ethernet-phy@3 {
> reg = <0x3>;
> interrupts = <0>;
> - status = "disabled";
> };
>
> - phy_port4: phy@4 {
> + phy_port4: ethernet-phy@4 {
> reg = <0x4>;
> interrupts = <0>;
> - status = "disabled";
> };
> };
> };
> diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml
> index 796ceac87445..e983d0e70c9b 100644
> --- a/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml
> +++ b/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml
> @@ -77,7 +77,6 @@ examples:
>
> rt6245@34 {
> compatible = "richtek,rt6245";
> - status = "okay";
> reg = <0x34>;
> enable-gpios = <&gpio26 2 0>;
>
> diff --git a/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml b/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml
> index 6f45582c914e..dd7a2f92634c 100644
> --- a/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml
> +++ b/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml
> @@ -39,6 +39,5 @@ examples:
> regulator-min-microvolt = <1500000>;
> regulator-max-microvolt = <3000000>;
> regulator-always-on;
> - status = "disabled";
> };
> ...
> diff --git a/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml b/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml
> index 9bf40952e5b7..b0c41ab1a746 100644
> --- a/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml
> +++ b/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml
> @@ -72,6 +72,5 @@ examples:
> resets = <&iomcu_rst 0x20 3>;
> pinctrl-names = "default";
> pinctrl-0 = <&i2c0_pmx_func &i2c0_cfg_func>;
> - status = "disabled";
> };
> ...
> diff --git a/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml b/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml
> index 6b2d56cc3f38..13bf6bb3f097 100644
> --- a/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml
> +++ b/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml
> @@ -57,7 +57,6 @@ examples:
> };
>
> pwm: pwm@e0d00000 {
> - status = "disabled";
> compatible = "intel,lgm-pwm";
> reg = <0xe0d00000 0x30>;
> clocks = <&cgu0 1>;
> diff --git a/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml b/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml
> index a2c55303810d..9593840a4a2b 100644
> --- a/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml
> +++ b/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml
> @@ -53,7 +53,6 @@ examples:
> rtc@51 {
> compatible = "microcrystal,rv3032";
> reg = <0x51>;
> - status = "okay";
> pinctrl-0 = <&rtc_nint_pins>;
> interrupts-extended = <&gpio1 16 IRQ_TYPE_LEVEL_HIGH>;
> trickle-resistor-ohms = <7000>;
> diff --git a/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml b/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml
> index c8b57c7fd08c..ecae9fa8561b 100644
> --- a/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml
> +++ b/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml
> @@ -35,7 +35,6 @@ examples:
> soc_ctrl0: soc-controller@f0000000 {
> compatible = "litex,soc-controller";
> reg = <0xf0000000 0xc>;
> - status = "okay";
> };
>
> ...
> diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
> index 06e83461705c..f97132400bb6 100644
> --- a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
> +++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
> @@ -180,7 +180,6 @@ examples:
> pinctrl-names = "default", "sleep";
> pinctrl-0 = <&sai2a_pins_a>, <&sai2b_pins_b>;
> pinctrl-1 = <&sai2a_sleep_pins_a>, <&sai2b_sleep_pins_b>;
> - status = "okay";
>
> sai2a: audio-controller@4400b004 {
> #sound-dai-cells = <0>;
> @@ -190,7 +189,6 @@ examples:
> dma-names = "tx";
> clocks = <&rcc SAI2_K>;
> clock-names = "sai_ck";
> - status = "okay";
> };
> };
>
> diff --git a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml
> index ec06789b21df..6806f53a4aed 100644
> --- a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml
> +++ b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml
> @@ -127,8 +127,6 @@ examples:
> compatible = "ti,j721e-cpb-audio";
> model = "j721e-cpb";
>
> - status = "okay";
> -
> ti,cpb-mcasp = <&mcasp10>;
> ti,cpb-codec = <&pcm3168a_1>;
>
> diff --git a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml
> index ee9f960de36b..859d369c71e2 100644
> --- a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml
> +++ b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml
> @@ -119,8 +119,6 @@ examples:
> compatible = "ti,j721e-cpb-ivi-audio";
> model = "j721e-cpb-ivi";
>
> - status = "okay";
> -
> ti,cpb-mcasp = <&mcasp10>;
> ti,cpb-codec = <&pcm3168a_1>;
>
> --
> 2.27.0
>
--
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
On Tue, Jul 20, 2021 at 11:20:25AM -0600, Rob Herring wrote:
> There's no reason to have "status" properties in examples. "okay" is the
> default, and "disabled" turns off some schema checks ('required'
> specifically).
Acked-by: Mark Brown <[email protected]>
Hi Rob,
On Tue, 2021-07-20 at 11:20 -0600, Rob Herring wrote:
> There's no reason to have "status" properties in examples. "okay" is the
> default, and "disabled" turns off some schema checks ('required'
> specifically).
Is this documented somewhere? If not, should it be? (Maybe in writing-
schema.rst -> Schema Contents -> examples?)
> Enabling qca,ar71xx causes a warning, so let's fix the node names:
>
> Documentation/devicetree/bindings/net/qca,ar71xx.example.dt.yaml: phy@3: '#phy-cells' is a required property
> From schema: schemas/phy/phy-provider.yaml
>
> Cc: Maxime Ripard <[email protected]>
> Cc: Chen-Yu Tsai <[email protected]>
> Cc: Thierry Reding <[email protected]>
> Cc: Sam Ravnborg <[email protected]>
> Cc: Rui Miguel Silva <[email protected]>
> Cc: Laurent Pinchart <[email protected]>
> Cc: Mauro Carvalho Chehab <[email protected]>
> Cc: "David S. Miller" <[email protected]>
> Cc: Jakub Kicinski <[email protected]>
> Cc: Mark Brown <[email protected]>
> Cc: Robert Marko <[email protected]>
> Cc: Philipp Zabel <[email protected]>
> Cc: Alessandro Zummo <[email protected]>
> Cc: Alexandre Belloni <[email protected]>
> Cc: Ramesh Shanmugasundaram <[email protected]>
> Cc: "G. Jaya Kumaran" <[email protected]>
> Cc: Linus Walleij <[email protected]>
> Cc: Oleksij Rempel <[email protected]>
> Cc: ChiYuan Huang <[email protected]>
> Cc: Wei Xu <[email protected]>
> Cc: Dilip Kota <[email protected]>
> Cc: Karol Gugala <[email protected]>
> Cc: Mateusz Holenko <[email protected]>
> Cc: Olivier Moysan <[email protected]>
> Cc: Peter Ujfalusi <[email protected]>
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Signed-off-by: Rob Herring <[email protected]>
> ---
> .../display/allwinner,sun8i-a83t-dw-hdmi.yaml | 2 --
> .../display/panel/boe,tv101wum-nl6.yaml | 1 -
> .../bindings/media/nxp,imx7-mipi-csi2.yaml | 2 --
> .../bindings/media/renesas,drif.yaml | 1 -
> .../bindings/net/intel,dwmac-plat.yaml | 2 --
> .../bindings/net/intel,ixp4xx-ethernet.yaml | 2 --
> .../bindings/net/nfc/samsung,s3fwrn5.yaml | 3 ---
> .../devicetree/bindings/net/qca,ar71xx.yaml | 25 ++++---------------
> .../regulator/richtek,rt6245-regulator.yaml | 1 -
> .../regulator/vqmmc-ipq4019-regulator.yaml | 1 -
> .../reset/hisilicon,hi3660-reset.yaml | 1 -
> .../bindings/reset/intel,rcu-gw.yaml | 1 -
[...]
Reviewed-by: Philipp Zabel <[email protected]>
regards
Philipp
On Tue, Jul 20, 2021 at 11:20:25AM -0600, Rob Herring wrote:
> There's no reason to have "status" properties in examples. "okay" is the
> default, and "disabled" turns off some schema checks ('required'
> specifically).
>
> Enabling qca,ar71xx causes a warning, so let's fix the node names:
>
> Documentation/devicetree/bindings/net/qca,ar71xx.example.dt.yaml: phy@3: '#phy-cells' is a required property
> From schema: schemas/phy/phy-provider.yaml
>
> Cc: Maxime Ripard <[email protected]>
> Cc: Chen-Yu Tsai <[email protected]>
> Cc: Thierry Reding <[email protected]>
> Cc: Sam Ravnborg <[email protected]>
> Cc: Rui Miguel Silva <[email protected]>
> Cc: Laurent Pinchart <[email protected]>
> Cc: Mauro Carvalho Chehab <[email protected]>
> Cc: "David S. Miller" <[email protected]>
> Cc: Jakub Kicinski <[email protected]>
> Cc: Mark Brown <[email protected]>
> Cc: Robert Marko <[email protected]>
> Cc: Philipp Zabel <[email protected]>
> Cc: Alessandro Zummo <[email protected]>
> Cc: Alexandre Belloni <[email protected]>
> Cc: Ramesh Shanmugasundaram <[email protected]>
> Cc: "G. Jaya Kumaran" <[email protected]>
> Cc: Linus Walleij <[email protected]>
> Cc: Oleksij Rempel <[email protected]>
> Cc: ChiYuan Huang <[email protected]>
> Cc: Wei Xu <[email protected]>
> Cc: Dilip Kota <[email protected]>
> Cc: Karol Gugala <[email protected]>
> Cc: Mateusz Holenko <[email protected]>
> Cc: Olivier Moysan <[email protected]>
> Cc: Peter Ujfalusi <[email protected]>
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Signed-off-by: Rob Herring <[email protected]>
Reviewed-by: Oleksij Rempel <[email protected]>
> ---
> .../display/allwinner,sun8i-a83t-dw-hdmi.yaml | 2 --
> .../display/panel/boe,tv101wum-nl6.yaml | 1 -
> .../bindings/media/nxp,imx7-mipi-csi2.yaml | 2 --
> .../bindings/media/renesas,drif.yaml | 1 -
> .../bindings/net/intel,dwmac-plat.yaml | 2 --
> .../bindings/net/intel,ixp4xx-ethernet.yaml | 2 --
> .../bindings/net/nfc/samsung,s3fwrn5.yaml | 3 ---
> .../devicetree/bindings/net/qca,ar71xx.yaml | 25 ++++---------------
> .../regulator/richtek,rt6245-regulator.yaml | 1 -
> .../regulator/vqmmc-ipq4019-regulator.yaml | 1 -
> .../reset/hisilicon,hi3660-reset.yaml | 1 -
> .../bindings/reset/intel,rcu-gw.yaml | 1 -
> .../bindings/rtc/microcrystal,rv3032.yaml | 1 -
> .../soc/litex/litex,soc-controller.yaml | 1 -
> .../bindings/sound/st,stm32-sai.yaml | 2 --
> .../bindings/sound/ti,j721e-cpb-audio.yaml | 2 --
> .../sound/ti,j721e-cpb-ivi-audio.yaml | 2 --
> 17 files changed, 5 insertions(+), 45 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
> index 5d42d36608d9..4951b5ef5c6a 100644
> --- a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
> +++ b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
> @@ -174,7 +174,6 @@ examples:
> phy-names = "phy";
> pinctrl-names = "default";
> pinctrl-0 = <&hdmi_pins>;
> - status = "disabled";
>
> ports {
> #address-cells = <1>;
> @@ -233,7 +232,6 @@ examples:
> phy-names = "phy";
> pinctrl-names = "default";
> pinctrl-0 = <&hdmi_pins>;
> - status = "disabled";
>
> ports {
> #address-cells = <1>;
> diff --git a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml
> index 38bc1d1b511e..b87a2e28c866 100644
> --- a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml
> +++ b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml
> @@ -70,7 +70,6 @@ examples:
> avee-supply = <&ppvarp_lcd>;
> pp1800-supply = <&pp1800_lcd>;
> backlight = <&backlight_lcd0>;
> - status = "okay";
> port {
> panel_in: endpoint {
> remote-endpoint = <&dsi_out>;
> diff --git a/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
> index 7c09eec78ce5..877183cf4278 100644
> --- a/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
> +++ b/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
> @@ -200,8 +200,6 @@ examples:
> clock-names = "pclk", "wrap", "phy", "axi";
> power-domains = <&mipi_pd>;
>
> - status = "disabled";
> -
> ports {
> #address-cells = <1>;
> #size-cells = <0>;
> diff --git a/Documentation/devicetree/bindings/media/renesas,drif.yaml b/Documentation/devicetree/bindings/media/renesas,drif.yaml
> index 2867d11fe156..9403b235e976 100644
> --- a/Documentation/devicetree/bindings/media/renesas,drif.yaml
> +++ b/Documentation/devicetree/bindings/media/renesas,drif.yaml
> @@ -242,7 +242,6 @@ examples:
> power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
> resets = <&cpg 513>;
> renesas,bonding = <&drif11>;
> - status = "disabled";
> };
>
> drif11: rif@e6f70000 {
> diff --git a/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml b/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml
> index c1948ce00081..79fa04f5e40d 100644
> --- a/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml
> +++ b/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml
> @@ -116,8 +116,6 @@ examples:
> snps,mtl-rx-config = <&mtl_rx_setup>;
> snps,mtl-tx-config = <&mtl_tx_setup>;
> snps,tso;
> - status = "okay";
> -
> mdio0 {
> #address-cells = <1>;
> #size-cells = <0>;
> diff --git a/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml b/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml
> index f2e91d1bf7d7..378ed2d3b003 100644
> --- a/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml
> +++ b/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml
> @@ -71,7 +71,6 @@ examples:
> ethernet@c8009000 {
> compatible = "intel,ixp4xx-ethernet";
> reg = <0xc8009000 0x1000>;
> - status = "disabled";
> queue-rx = <&qmgr 4>;
> queue-txready = <&qmgr 21>;
> intel,npe-handle = <&npe 1>;
> @@ -82,7 +81,6 @@ examples:
> ethernet@c800c000 {
> compatible = "intel,ixp4xx-ethernet";
> reg = <0xc800c000 0x1000>;
> - status = "disabled";
> queue-rx = <&qmgr 3>;
> queue-txready = <&qmgr 20>;
> intel,npe-handle = <&npe 2>;
> diff --git a/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml b/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
> index 081742c2b726..64995cbb0f97 100644
> --- a/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
> +++ b/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
> @@ -90,14 +90,11 @@ examples:
> # UART example on Raspberry Pi
> - |
> uart0 {
> - status = "okay";
> -
> nfc {
> compatible = "samsung,s3fwrn82";
>
> en-gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
> wake-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
>
> - status = "okay";
> };
> };
> diff --git a/Documentation/devicetree/bindings/net/qca,ar71xx.yaml b/Documentation/devicetree/bindings/net/qca,ar71xx.yaml
> index f0db22645d73..cf4d35edaa1b 100644
> --- a/Documentation/devicetree/bindings/net/qca,ar71xx.yaml
> +++ b/Documentation/devicetree/bindings/net/qca,ar71xx.yaml
> @@ -101,8 +101,6 @@ examples:
>
> phy-mode = "gmii";
>
> - status = "disabled";
> -
> fixed-link {
> speed = <1000>;
> full-duplex;
> @@ -148,32 +146,24 @@ examples:
> reg = <0x1>;
> phy-handle = <&phy_port0>;
> phy-mode = "internal";
> -
> - status = "disabled";
> };
>
> switch_port2: port@2 {
> reg = <0x2>;
> phy-handle = <&phy_port1>;
> phy-mode = "internal";
> -
> - status = "disabled";
> };
>
> switch_port3: port@3 {
> reg = <0x3>;
> phy-handle = <&phy_port2>;
> phy-mode = "internal";
> -
> - status = "disabled";
> };
>
> switch_port4: port@4 {
> reg = <0x4>;
> phy-handle = <&phy_port3>;
> phy-mode = "internal";
> -
> - status = "disabled";
> };
> };
>
> @@ -183,34 +173,29 @@ examples:
>
> interrupt-parent = <&switch10>;
>
> - phy_port0: phy@0 {
> + phy_port0: ethernet-phy@0 {
> reg = <0x0>;
> interrupts = <0>;
> - status = "disabled";
> };
>
> - phy_port1: phy@1 {
> + phy_port1: ethernet-phy@1 {
> reg = <0x1>;
> interrupts = <0>;
> - status = "disabled";
> };
>
> - phy_port2: phy@2 {
> + phy_port2: ethernet-phy@2 {
> reg = <0x2>;
> interrupts = <0>;
> - status = "disabled";
> };
>
> - phy_port3: phy@3 {
> + phy_port3: ethernet-phy@3 {
> reg = <0x3>;
> interrupts = <0>;
> - status = "disabled";
> };
>
> - phy_port4: phy@4 {
> + phy_port4: ethernet-phy@4 {
> reg = <0x4>;
> interrupts = <0>;
> - status = "disabled";
> };
> };
> };
> diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml
> index 796ceac87445..e983d0e70c9b 100644
> --- a/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml
> +++ b/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml
> @@ -77,7 +77,6 @@ examples:
>
> rt6245@34 {
> compatible = "richtek,rt6245";
> - status = "okay";
> reg = <0x34>;
> enable-gpios = <&gpio26 2 0>;
>
> diff --git a/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml b/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml
> index 6f45582c914e..dd7a2f92634c 100644
> --- a/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml
> +++ b/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml
> @@ -39,6 +39,5 @@ examples:
> regulator-min-microvolt = <1500000>;
> regulator-max-microvolt = <3000000>;
> regulator-always-on;
> - status = "disabled";
> };
> ...
> diff --git a/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml b/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml
> index 9bf40952e5b7..b0c41ab1a746 100644
> --- a/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml
> +++ b/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml
> @@ -72,6 +72,5 @@ examples:
> resets = <&iomcu_rst 0x20 3>;
> pinctrl-names = "default";
> pinctrl-0 = <&i2c0_pmx_func &i2c0_cfg_func>;
> - status = "disabled";
> };
> ...
> diff --git a/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml b/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml
> index 6b2d56cc3f38..13bf6bb3f097 100644
> --- a/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml
> +++ b/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml
> @@ -57,7 +57,6 @@ examples:
> };
>
> pwm: pwm@e0d00000 {
> - status = "disabled";
> compatible = "intel,lgm-pwm";
> reg = <0xe0d00000 0x30>;
> clocks = <&cgu0 1>;
> diff --git a/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml b/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml
> index a2c55303810d..9593840a4a2b 100644
> --- a/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml
> +++ b/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml
> @@ -53,7 +53,6 @@ examples:
> rtc@51 {
> compatible = "microcrystal,rv3032";
> reg = <0x51>;
> - status = "okay";
> pinctrl-0 = <&rtc_nint_pins>;
> interrupts-extended = <&gpio1 16 IRQ_TYPE_LEVEL_HIGH>;
> trickle-resistor-ohms = <7000>;
> diff --git a/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml b/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml
> index c8b57c7fd08c..ecae9fa8561b 100644
> --- a/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml
> +++ b/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml
> @@ -35,7 +35,6 @@ examples:
> soc_ctrl0: soc-controller@f0000000 {
> compatible = "litex,soc-controller";
> reg = <0xf0000000 0xc>;
> - status = "okay";
> };
>
> ...
> diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
> index 06e83461705c..f97132400bb6 100644
> --- a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
> +++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
> @@ -180,7 +180,6 @@ examples:
> pinctrl-names = "default", "sleep";
> pinctrl-0 = <&sai2a_pins_a>, <&sai2b_pins_b>;
> pinctrl-1 = <&sai2a_sleep_pins_a>, <&sai2b_sleep_pins_b>;
> - status = "okay";
>
> sai2a: audio-controller@4400b004 {
> #sound-dai-cells = <0>;
> @@ -190,7 +189,6 @@ examples:
> dma-names = "tx";
> clocks = <&rcc SAI2_K>;
> clock-names = "sai_ck";
> - status = "okay";
> };
> };
>
> diff --git a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml
> index ec06789b21df..6806f53a4aed 100644
> --- a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml
> +++ b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml
> @@ -127,8 +127,6 @@ examples:
> compatible = "ti,j721e-cpb-audio";
> model = "j721e-cpb";
>
> - status = "okay";
> -
> ti,cpb-mcasp = <&mcasp10>;
> ti,cpb-codec = <&pcm3168a_1>;
>
> diff --git a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml
> index ee9f960de36b..859d369c71e2 100644
> --- a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml
> +++ b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml
> @@ -119,8 +119,6 @@ examples:
> compatible = "ti,j721e-cpb-ivi-audio";
> model = "j721e-cpb-ivi";
>
> - status = "okay";
> -
> ti,cpb-mcasp = <&mcasp10>;
> ti,cpb-codec = <&pcm3168a_1>;
>
> --
> 2.27.0
>
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
On Wed, Jul 21, 2021 at 2:33 AM Philipp Zabel <[email protected]> wrote:
>
> Hi Rob,
>
> On Tue, 2021-07-20 at 11:20 -0600, Rob Herring wrote:
> > There's no reason to have "status" properties in examples. "okay" is the
> > default, and "disabled" turns off some schema checks ('required'
> > specifically).
>
> Is this documented somewhere? If not, should it be? (Maybe in writing-
> schema.rst -> Schema Contents -> examples?)
I don't think it is. I'm writing a schema for it which works for both
those that read documentation and those that don't.
Rob
On Tue, Jul 20, 2021 at 7:20 PM Rob Herring <[email protected]> wrote:
> There's no reason to have "status" properties in examples. "okay" is the
> default, and "disabled" turns off some schema checks ('required'
> specifically).
All of mine are mistakes anyway.
Reviewed-by: Linus Walleij <[email protected]>
Thanks for fixing this up.
Yours,
Linus Walleij
On Tue, 20 Jul 2021 11:20:25 -0600, Rob Herring wrote:
> There's no reason to have "status" properties in examples. "okay" is the
> default, and "disabled" turns off some schema checks ('required'
> specifically).
>
> Enabling qca,ar71xx causes a warning, so let's fix the node names:
>
> Documentation/devicetree/bindings/net/qca,ar71xx.example.dt.yaml: phy@3: '#phy-cells' is a required property
> From schema: schemas/phy/phy-provider.yaml
>
> Cc: Maxime Ripard <[email protected]>
> Cc: Chen-Yu Tsai <[email protected]>
> Cc: Thierry Reding <[email protected]>
> Cc: Sam Ravnborg <[email protected]>
> Cc: Rui Miguel Silva <[email protected]>
> Cc: Laurent Pinchart <[email protected]>
> Cc: Mauro Carvalho Chehab <[email protected]>
> Cc: "David S. Miller" <[email protected]>
> Cc: Jakub Kicinski <[email protected]>
> Cc: Mark Brown <[email protected]>
> Cc: Robert Marko <[email protected]>
> Cc: Philipp Zabel <[email protected]>
> Cc: Alessandro Zummo <[email protected]>
> Cc: Alexandre Belloni <[email protected]>
> Cc: Ramesh Shanmugasundaram <[email protected]>
> Cc: "G. Jaya Kumaran" <[email protected]>
> Cc: Linus Walleij <[email protected]>
> Cc: Oleksij Rempel <[email protected]>
> Cc: ChiYuan Huang <[email protected]>
> Cc: Wei Xu <[email protected]>
> Cc: Dilip Kota <[email protected]>
> Cc: Karol Gugala <[email protected]>
> Cc: Mateusz Holenko <[email protected]>
> Cc: Olivier Moysan <[email protected]>
> Cc: Peter Ujfalusi <[email protected]>
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Signed-off-by: Rob Herring <[email protected]>
> ---
> .../display/allwinner,sun8i-a83t-dw-hdmi.yaml | 2 --
> .../display/panel/boe,tv101wum-nl6.yaml | 1 -
> .../bindings/media/nxp,imx7-mipi-csi2.yaml | 2 --
> .../bindings/media/renesas,drif.yaml | 1 -
> .../bindings/net/intel,dwmac-plat.yaml | 2 --
> .../bindings/net/intel,ixp4xx-ethernet.yaml | 2 --
> .../bindings/net/nfc/samsung,s3fwrn5.yaml | 3 ---
> .../devicetree/bindings/net/qca,ar71xx.yaml | 25 ++++---------------
> .../regulator/richtek,rt6245-regulator.yaml | 1 -
> .../regulator/vqmmc-ipq4019-regulator.yaml | 1 -
> .../reset/hisilicon,hi3660-reset.yaml | 1 -
> .../bindings/reset/intel,rcu-gw.yaml | 1 -
> .../bindings/rtc/microcrystal,rv3032.yaml | 1 -
> .../soc/litex/litex,soc-controller.yaml | 1 -
> .../bindings/sound/st,stm32-sai.yaml | 2 --
> .../bindings/sound/ti,j721e-cpb-audio.yaml | 2 --
> .../sound/ti,j721e-cpb-ivi-audio.yaml | 2 --
> 17 files changed, 5 insertions(+), 45 deletions(-)
>
Applied, thanks!