Tanix TX6 box has a 32 GB eMMC module. With changes in this series, I
get following figures with hdparm -tT:
/dev/mmcblk2:
Timing cached reads: 1638 MB in 2.00 seconds = 818.44 MB/sec
Timing buffered disk reads: 376 MB in 3.01 seconds = 124.74 MB/sec
First patch only sets proper power supplies to GPIO banks and second
adds eMMC support.
Please take a look.
Best regards,
Jernej Skrabec
Jernej Skrabec (2):
arm64: dts: allwinner: h6: tanix-tx6: Add PIO power supplies
arm64: dts: allwinner: h6: tanix-tx6: enable emmc
.../dts/allwinner/sun50i-h6-tanix-tx6.dts | 23 +++++++++++++++++++
1 file changed, 23 insertions(+)
--
2.32.0