2021-07-27 06:30:08

by 'Manivannan Sadhasivam'

[permalink] [raw]
Subject: [PATCH] mtd: rawnand: Fix probe failure due to of_get_nand_secure_regions()

Due to 14f97f0b8e2b, the rawnand platforms without "secure-regions"
property defined in DT fails to probe. The issue is,
of_get_nand_secure_regions() errors out if
of_property_count_elems_of_size() returns a negative error code.

If the "secure-regions" property is not present in DT, then also we'll
get -EINVAL from of_property_count_elems_of_size() but it should not
be treated as an error for platforms not declaring "secure-regions"
in DT.

So fix this behaviour by checking for the existence of that property in
DT and return 0 if it is not present.

Fixes: 14f97f0b8e2b ("mtd: rawnand: Add a check in of_get_nand_secure_regions()")
Reported-by: Martin Kaiser <[email protected]>
Signed-off-by: Manivannan Sadhasivam <[email protected]>
---
drivers/mtd/nand/raw/nand_base.c | 6 ++++++
1 file changed, 6 insertions(+)

diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c
index cbba46432e39..3d6c6e880520 100644
--- a/drivers/mtd/nand/raw/nand_base.c
+++ b/drivers/mtd/nand/raw/nand_base.c
@@ -5228,8 +5228,14 @@ static bool of_get_nand_on_flash_bbt(struct device_node *np)
static int of_get_nand_secure_regions(struct nand_chip *chip)
{
struct device_node *dn = nand_get_flash_node(chip);
+ struct property *prop;
int nr_elem, i, j;

+ /* Only proceed if the "secure-regions" property is present in DT */
+ prop = of_find_property(dn, "secure-regions", NULL);
+ if (!prop)
+ return 0;
+
nr_elem = of_property_count_elems_of_size(dn, "secure-regions", sizeof(u64));
if (nr_elem <= 0)
return nr_elem;
--
2.25.1


2021-07-27 16:14:38

by Martin Kaiser

[permalink] [raw]
Subject: Re: [PATCH] mtd: rawnand: Fix probe failure due to of_get_nand_secure_regions()

Hi Mani and all,

Thus wrote Manivannan Sadhasivam ([email protected]):

> Due to 14f97f0b8e2b, the rawnand platforms without "secure-regions"
> property defined in DT fails to probe. The issue is,
> of_get_nand_secure_regions() errors out if
> of_property_count_elems_of_size() returns a negative error code.

> If the "secure-regions" property is not present in DT, then also we'll
> get -EINVAL from of_property_count_elems_of_size() but it should not
> be treated as an error for platforms not declaring "secure-regions"
> in DT.

> So fix this behaviour by checking for the existence of that property in
> DT and return 0 if it is not present.

> Fixes: 14f97f0b8e2b ("mtd: rawnand: Add a check in of_get_nand_secure_regions()")
> Reported-by: Martin Kaiser <[email protected]>
> Signed-off-by: Manivannan Sadhasivam <[email protected]>
> ---
> drivers/mtd/nand/raw/nand_base.c | 6 ++++++
> 1 file changed, 6 insertions(+)

> diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c
> index cbba46432e39..3d6c6e880520 100644
> --- a/drivers/mtd/nand/raw/nand_base.c
> +++ b/drivers/mtd/nand/raw/nand_base.c
> @@ -5228,8 +5228,14 @@ static bool of_get_nand_on_flash_bbt(struct device_node *np)
> static int of_get_nand_secure_regions(struct nand_chip *chip)
> {
> struct device_node *dn = nand_get_flash_node(chip);
> + struct property *prop;
> int nr_elem, i, j;

> + /* Only proceed if the "secure-regions" property is present in DT */
> + prop = of_find_property(dn, "secure-regions", NULL);
> + if (!prop)
> + return 0;
> +
> nr_elem = of_property_count_elems_of_size(dn, "secure-regions", sizeof(u64));
> if (nr_elem <= 0)
> return nr_elem;
> --
> 2.25.1

not surprisingly, this fixes the issue for me.

Reviewed-by: Martin Kaiser <[email protected]>
Tested-by: Martin Kaiser <[email protected]>

Still, I was wondering if the behaviour of of_property_count_elems_of_size
makes sense. Without a prior check, there's no chance for the caller to
distinguish between "property is absent" and "property is malformed".

Thanks,
Martin

2021-08-07 00:08:34

by Miquel Raynal

[permalink] [raw]
Subject: Re: [PATCH] mtd: rawnand: Fix probe failure due to of_get_nand_secure_regions()

On Tue, 2021-07-27 at 06:28:13 UTC, Manivannan Sadhasivam wrote:
> Due to 14f97f0b8e2b, the rawnand platforms without "secure-regions"
> property defined in DT fails to probe. The issue is,
> of_get_nand_secure_regions() errors out if
> of_property_count_elems_of_size() returns a negative error code.
>
> If the "secure-regions" property is not present in DT, then also we'll
> get -EINVAL from of_property_count_elems_of_size() but it should not
> be treated as an error for platforms not declaring "secure-regions"
> in DT.
>
> So fix this behaviour by checking for the existence of that property in
> DT and return 0 if it is not present.
>
> Fixes: 14f97f0b8e2b ("mtd: rawnand: Add a check in of_get_nand_secure_regions()")
> Reported-by: Martin Kaiser <[email protected]>
> Signed-off-by: Manivannan Sadhasivam <[email protected]>
> Reviewed-by: Martin Kaiser <[email protected]>
> Tested-by: Martin Kaiser <[email protected]>

Applied to https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git mtd/fixes, thanks.

Miquel