UAPI headers are built with -std=c90 and C++ style comments are
explicitly prohibited. The recent commit overlooked the rule and
caused the error at header installation. This patch corrects those.
Fixes: bea36afa102e ("ALSA: firewire-motu: add message parser to gather meter information in register DSP model")
Fixes: 90b28f3bb85c ("ALSA: firewire-motu: add message parser for meter information in command DSP model")
Fixes: 634ec0b2906e ("ALSA: firewire-motu: notify event for parameter change in register DSP model")
Reported-by: Stephen Rothwell <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
---
include/uapi/sound/firewire.h | 70 ++++++++++++++++++-----------------
1 file changed, 37 insertions(+), 33 deletions(-)
diff --git a/include/uapi/sound/firewire.h b/include/uapi/sound/firewire.h
index 76190a0cb069..e52a97b3ceaa 100644
--- a/include/uapi/sound/firewire.h
+++ b/include/uapi/sound/firewire.h
@@ -68,8 +68,8 @@ struct snd_firewire_event_tascam_control {
struct snd_firewire_event_motu_register_dsp_change {
unsigned int type;
- __u32 count; // The number of changes.
- __u32 changes[]; // Encoded event for change of register DSP.
+ __u32 count; /* The number of changes. */
+ __u32 changes[]; /* Encoded event for change of register DSP. */
};
union snd_firewire_event {
@@ -119,25 +119,27 @@ struct snd_firewire_tascam_state {
__be32 data[SNDRV_FIREWIRE_TASCAM_STATE_COUNT];
};
-// In below MOTU models, software is allowed to control their DSP by accessing to registers.
-// - 828mk2
-// - 896hd
-// - Traveler
-// - 8 pre
-// - Ultralite
-// - 4 pre
-// - Audio Express
-//
-// On the other hand, the status of DSP is split into specific messages included in the sequence of
-// isochronous packet. ALSA firewire-motu driver gathers the messages and allow userspace applications
-// to read it via ioctl. In 828mk2, 896hd, and Traveler, hardware meter for all of physical inputs
-// are put into the message, while one pair of physical outputs is selected. The selection is done by
-// LSB one byte in asynchronous write quadlet transaction to 0x'ffff'f000'0b2c.
-//
-// I note that V3HD/V4HD uses asynchronous transaction for the purpose. The destination address is
-// registered to 0x'ffff'f000'0b38 and '0b3c by asynchronous write quadlet request. The size of
-// message differs between 23 and 51 quadlets. For the case, the number of mixer bus can be extended
-// up to 12.
+/*
+ * In below MOTU models, software is allowed to control their DSP by accessing to registers.
+ * - 828mk2
+ * - 896hd
+ * - Traveler
+ * - 8 pre
+ * - Ultralite
+ * - 4 pre
+ * - Audio Express
+ *
+ * On the other hand, the status of DSP is split into specific messages included in the sequence of
+ * isochronous packet. ALSA firewire-motu driver gathers the messages and allow userspace applications
+ * to read it via ioctl. In 828mk2, 896hd, and Traveler, hardware meter for all of physical inputs
+ * are put into the message, while one pair of physical outputs is selected. The selection is done by
+ * LSB one byte in asynchronous write quadlet transaction to 0x'ffff'f000'0b2c.
+ *
+ * I note that V3HD/V4HD uses asynchronous transaction for the purpose. The destination address is
+ * registered to 0x'ffff'f000'0b38 and '0b3c by asynchronous write quadlet request. The size of
+ * message differs between 23 and 51 quadlets. For the case, the number of mixer bus can be extended
+ * up to 12.
+ */
#define SNDRV_FIREWIRE_MOTU_REGISTER_DSP_METER_COUNT 40
@@ -219,18 +221,20 @@ struct snd_firewire_motu_register_dsp_parameter {
__u8 reserved[64];
};
-// In below MOTU models, software is allowed to control their DSP by command in frame of
-// asynchronous transaction to 0x'ffff'0001'0000:
-//
-// - 828 mk3 (FireWire only and Hybrid)
-// - 896 mk3 (FireWire only and Hybrid)
-// - Ultralite mk3 (FireWire only and Hybrid)
-// - Traveler mk3
-// - Track 16
-//
-// On the other hand, the states of hardware meter is split into specific messages included in the
-// sequence of isochronous packet. ALSA firewire-motu driver gathers the message and allow userspace
-// application to read it via ioctl.
+/*
+ * In below MOTU models, software is allowed to control their DSP by command in frame of
+ * asynchronous transaction to 0x'ffff'0001'0000:
+ *
+ * - 828 mk3 (FireWire only and Hybrid)
+ * - 896 mk3 (FireWire only and Hybrid)
+ * - Ultralite mk3 (FireWire only and Hybrid)
+ * - Traveler mk3
+ * - Track 16
+ *
+ * On the other hand, the states of hardware meter is split into specific messages included in the
+ * sequence of isochronous packet. ALSA firewire-motu driver gathers the message and allow userspace
+ * application to read it via ioctl.
+ */
#define SNDRV_FIREWIRE_MOTU_COMMAND_DSP_METER_COUNT 400
--
2.26.2
Hi,
On Mon, Oct 18, 2021 at 08:37:00AM +0200, Takashi Iwai wrote:
> UAPI headers are built with -std=c90 and C++ style comments are
> explicitly prohibited. The recent commit overlooked the rule and
> caused the error at header installation. This patch corrects those.
>
> Fixes: bea36afa102e ("ALSA: firewire-motu: add message parser to gather meter information in register DSP model")
> Fixes: 90b28f3bb85c ("ALSA: firewire-motu: add message parser for meter information in command DSP model")
> Fixes: 634ec0b2906e ("ALSA: firewire-motu: notify event for parameter change in register DSP model")
> Reported-by: Stephen Rothwell <[email protected]>
> Link: https://lore.kernel.org/r/[email protected]
> Signed-off-by: Takashi Iwai <[email protected]>
> ---
> include/uapi/sound/firewire.h | 70 ++++++++++++++++++-----------------
> 1 file changed, 37 insertions(+), 33 deletions(-)
I completely overlooked it. Thanks for your reporting.
Acked-by: Takashi Sakamoto <[email protected]>
Regards
Takashi Sakamoto