hi,
adding interface to maintain multiple direct functions
within single calls. It's a base for follow up bpf batch
attach functionality.
New interface:
int register_ftrace_direct_multi(struct ftrace_ops *ops, unsigned long addr)
int unregister_ftrace_direct_multi(struct ftrace_ops *ops)
int modify_ftrace_direct_multi(struct ftrace_ops *ops, unsigned long addr)
that allows to register/unregister/modify direct function 'addr'
with struct ftrace_ops object. The ops filter can be updated
before with ftrace_set_filter_ip calls
1) patches (1-4) that fix the ftrace graph tracing over the function
with direct trampolines attached
2) patches (5-8) that add batch interface for ftrace direct function
register/unregister/modify
Also available at (based on Steven's ftrace/core branch):
https://git.kernel.org/pub/scm/linux/kernel/git/jolsa/perf.git
ftrace/direct
v2 changes:
- added comments to API functions
- move common cleanup code to new remove_direct_functions_hash
function
- added addr argument to unregister_ftrace_direct_multi API,
to properly cleanup direct_functions hash
- added missing unregister_ftrace_direct call to trampoline/graph
selftest
- added comment to modify_ftrace_direct_multi about non-callback
gap between ftrace_shutdown and ftrace_startup
thanks,
jirka
---
Jiri Olsa (6):
x86/ftrace: Remove extra orig rax move
tracing: Add trampoline/graph selftest
ftrace: Add ftrace_add_rec_direct function
ftrace: Add multi direct register/unregister interface
ftrace: Add multi direct modify interface
ftrace/samples: Add multi direct interface test module
Steven Rostedt (VMware) (2):
x86/ftrace: Remove fault protection code in prepare_ftrace_return
x86/ftrace: Make function graph use ftrace directly
arch/x86/include/asm/ftrace.h | 9 +++-
arch/x86/kernel/ftrace.c | 71 +++++++++++++++---------------
arch/x86/kernel/ftrace_64.S | 30 +------------
include/linux/ftrace.h | 26 +++++++++++
kernel/trace/fgraph.c | 6 ++-
kernel/trace/ftrace.c | 268 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++------------
kernel/trace/trace_selftest.c | 54 ++++++++++++++++++++++-
samples/ftrace/Makefile | 1 +
samples/ftrace/ftrace-direct-multi.c | 52 ++++++++++++++++++++++
9 files changed, 420 insertions(+), 97 deletions(-)
create mode 100644 samples/ftrace/ftrace-direct-multi.c
From: "Steven Rostedt (VMware)" <[email protected]>
Removing the fault protection code when writing return_hooker
to stack. As Steven noted:
> That protection was there from the beginning due to being "paranoid",
> considering ftrace was bricking network cards. But that protection
> would not have even protected against that.
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Signed-off-by: Jiri Olsa <[email protected]>
---
arch/x86/kernel/ftrace.c | 38 +++-----------------------------------
1 file changed, 3 insertions(+), 35 deletions(-)
diff --git a/arch/x86/kernel/ftrace.c b/arch/x86/kernel/ftrace.c
index 1b3ce3b4a2a2..c555624da989 100644
--- a/arch/x86/kernel/ftrace.c
+++ b/arch/x86/kernel/ftrace.c
@@ -625,12 +625,10 @@ int ftrace_disable_ftrace_graph_caller(void)
* Hook the return address and push it in the stack of return addrs
* in current thread info.
*/
-void prepare_ftrace_return(unsigned long self_addr, unsigned long *parent,
+void prepare_ftrace_return(unsigned long ip, unsigned long *parent,
unsigned long frame_pointer)
{
unsigned long return_hooker = (unsigned long)&return_to_handler;
- unsigned long old;
- int faulted;
/*
* When resuming from suspend-to-ram, this function can be indirectly
@@ -650,37 +648,7 @@ void prepare_ftrace_return(unsigned long self_addr, unsigned long *parent,
if (unlikely(atomic_read(¤t->tracing_graph_pause)))
return;
- /*
- * Protect against fault, even if it shouldn't
- * happen. This tool is too much intrusive to
- * ignore such a protection.
- */
- asm volatile(
- "1: " _ASM_MOV " (%[parent]), %[old]\n"
- "2: " _ASM_MOV " %[return_hooker], (%[parent])\n"
- " movl $0, %[faulted]\n"
- "3:\n"
-
- ".section .fixup, \"ax\"\n"
- "4: movl $1, %[faulted]\n"
- " jmp 3b\n"
- ".previous\n"
-
- _ASM_EXTABLE(1b, 4b)
- _ASM_EXTABLE(2b, 4b)
-
- : [old] "=&r" (old), [faulted] "=r" (faulted)
- : [parent] "r" (parent), [return_hooker] "r" (return_hooker)
- : "memory"
- );
-
- if (unlikely(faulted)) {
- ftrace_graph_stop();
- WARN_ON(1);
- return;
- }
-
- if (function_graph_enter(old, self_addr, frame_pointer, parent))
- *parent = old;
+ if (!function_graph_enter(*parent, ip, frame_pointer, parent))
+ *parent = return_hooker;
}
#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
--
2.31.1
From: "Steven Rostedt (VMware)" <[email protected]>
We don't need special hook for graph tracer entry point,
but instead we can use graph_ops::func function to install
the return_hooker.
This moves the graph tracing setup _before_ the direct
trampoline prepares the stack, so the return_hooker will
be called when the direct trampoline is finished.
This simplifies the code, because we don't need to take into
account the direct trampoline setup when preparing the graph
tracer hooker and we can allow function graph tracer on entries
registered with direct trampoline.
[fixed compile error reported by kernel test robot <[email protected]>]
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Signed-off-by: Jiri Olsa <[email protected]>
---
arch/x86/include/asm/ftrace.h | 9 +++++++--
arch/x86/kernel/ftrace.c | 37 ++++++++++++++++++++++++++++++++---
arch/x86/kernel/ftrace_64.S | 29 +--------------------------
include/linux/ftrace.h | 9 +++++++++
kernel/trace/fgraph.c | 6 ++++--
5 files changed, 55 insertions(+), 35 deletions(-)
diff --git a/arch/x86/include/asm/ftrace.h b/arch/x86/include/asm/ftrace.h
index 9f3130f40807..024d9797646e 100644
--- a/arch/x86/include/asm/ftrace.h
+++ b/arch/x86/include/asm/ftrace.h
@@ -57,6 +57,13 @@ arch_ftrace_get_regs(struct ftrace_regs *fregs)
#define ftrace_instruction_pointer_set(fregs, _ip) \
do { (fregs)->regs.ip = (_ip); } while (0)
+
+struct ftrace_ops;
+#define ftrace_graph_func ftrace_graph_func
+void ftrace_graph_func(unsigned long ip, unsigned long parent_ip,
+ struct ftrace_ops *op, struct ftrace_regs *fregs);
+#else
+#define FTRACE_GRAPH_TRAMP_ADDR FTRACE_GRAPH_ADDR
#endif
#ifdef CONFIG_DYNAMIC_FTRACE
@@ -65,8 +72,6 @@ struct dyn_arch_ftrace {
/* No extra data needed for x86 */
};
-#define FTRACE_GRAPH_TRAMP_ADDR FTRACE_GRAPH_ADDR
-
#endif /* CONFIG_DYNAMIC_FTRACE */
#endif /* __ASSEMBLY__ */
#endif /* CONFIG_FUNCTION_TRACER */
diff --git a/arch/x86/kernel/ftrace.c b/arch/x86/kernel/ftrace.c
index c555624da989..804fcc6ef2c7 100644
--- a/arch/x86/kernel/ftrace.c
+++ b/arch/x86/kernel/ftrace.c
@@ -527,7 +527,7 @@ static void *addr_from_call(void *ptr)
return ptr + CALL_INSN_SIZE + call.disp;
}
-void prepare_ftrace_return(unsigned long self_addr, unsigned long *parent,
+void prepare_ftrace_return(unsigned long ip, unsigned long *parent,
unsigned long frame_pointer);
/*
@@ -541,7 +541,8 @@ static void *static_tramp_func(struct ftrace_ops *ops, struct dyn_ftrace *rec)
void *ptr;
if (ops && ops->trampoline) {
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+#if !defined(CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS) && \
+ defined(CONFIG_FUNCTION_GRAPH_TRACER)
/*
* We only know about function graph tracer setting as static
* trampoline.
@@ -589,8 +590,9 @@ void arch_ftrace_trampoline_free(struct ftrace_ops *ops)
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
#ifdef CONFIG_DYNAMIC_FTRACE
-extern void ftrace_graph_call(void);
+#ifndef CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS
+extern void ftrace_graph_call(void);
static const char *ftrace_jmp_replace(unsigned long ip, unsigned long addr)
{
return text_gen_insn(JMP32_INSN_OPCODE, (void *)ip, (void *)addr);
@@ -618,7 +620,17 @@ int ftrace_disable_ftrace_graph_caller(void)
return ftrace_mod_jmp(ip, &ftrace_stub);
}
+#else /* !CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS */
+int ftrace_enable_ftrace_graph_caller(void)
+{
+ return 0;
+}
+int ftrace_disable_ftrace_graph_caller(void)
+{
+ return 0;
+}
+#endif /* CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS */
#endif /* !CONFIG_DYNAMIC_FTRACE */
/*
@@ -629,6 +641,7 @@ void prepare_ftrace_return(unsigned long ip, unsigned long *parent,
unsigned long frame_pointer)
{
unsigned long return_hooker = (unsigned long)&return_to_handler;
+ int bit;
/*
* When resuming from suspend-to-ram, this function can be indirectly
@@ -648,7 +661,25 @@ void prepare_ftrace_return(unsigned long ip, unsigned long *parent,
if (unlikely(atomic_read(¤t->tracing_graph_pause)))
return;
+ bit = ftrace_test_recursion_trylock(ip, *parent);
+ if (bit < 0)
+ return;
+
if (!function_graph_enter(*parent, ip, frame_pointer, parent))
*parent = return_hooker;
+
+ ftrace_test_recursion_unlock(bit);
+}
+
+#ifdef CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS
+void ftrace_graph_func(unsigned long ip, unsigned long parent_ip,
+ struct ftrace_ops *op, struct ftrace_regs *fregs)
+{
+ struct pt_regs *regs = &fregs->regs;
+ unsigned long *stack = (unsigned long *)kernel_stack_pointer(regs);
+
+ prepare_ftrace_return(ip, (unsigned long *)stack, 0);
}
+#endif
+
#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
diff --git a/arch/x86/kernel/ftrace_64.S b/arch/x86/kernel/ftrace_64.S
index a8eb084a7a9a..7a879901f103 100644
--- a/arch/x86/kernel/ftrace_64.S
+++ b/arch/x86/kernel/ftrace_64.S
@@ -174,11 +174,6 @@ SYM_INNER_LABEL(ftrace_caller_end, SYM_L_GLOBAL)
SYM_FUNC_END(ftrace_caller);
SYM_FUNC_START(ftrace_epilogue)
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
-SYM_INNER_LABEL(ftrace_graph_call, SYM_L_GLOBAL)
- jmp ftrace_stub
-#endif
-
/*
* This is weak to keep gas from relaxing the jumps.
* It is also used to copy the retq for trampolines.
@@ -288,15 +283,6 @@ SYM_FUNC_START(__fentry__)
cmpq $ftrace_stub, ftrace_trace_function
jnz trace
-fgraph_trace:
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
- cmpq $ftrace_stub, ftrace_graph_return
- jnz ftrace_graph_caller
-
- cmpq $ftrace_graph_entry_stub, ftrace_graph_entry
- jnz ftrace_graph_caller
-#endif
-
SYM_INNER_LABEL(ftrace_stub, SYM_L_GLOBAL)
retq
@@ -314,25 +300,12 @@ trace:
CALL_NOSPEC r8
restore_mcount_regs
- jmp fgraph_trace
+ jmp ftrace_stub
SYM_FUNC_END(__fentry__)
EXPORT_SYMBOL(__fentry__)
#endif /* CONFIG_DYNAMIC_FTRACE */
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
-SYM_FUNC_START(ftrace_graph_caller)
- /* Saves rbp into %rdx and fills first parameter */
- save_mcount_regs
-
- leaq MCOUNT_REG_SIZE+8(%rsp), %rsi
- movq $0, %rdx /* No framepointers needed */
- call prepare_ftrace_return
-
- restore_mcount_regs
-
- retq
-SYM_FUNC_END(ftrace_graph_caller)
-
SYM_FUNC_START(return_to_handler)
subq $24, %rsp
diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h
index 832e65f06754..1ca60ee70fb0 100644
--- a/include/linux/ftrace.h
+++ b/include/linux/ftrace.h
@@ -795,6 +795,15 @@ static inline bool is_ftrace_trampoline(unsigned long addr)
}
#endif /* CONFIG_DYNAMIC_FTRACE */
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+#ifndef ftrace_graph_func
+#define ftrace_graph_func ftrace_stub
+#define FTRACE_OPS_GRAPH_STUB FTRACE_OPS_FL_STUB
+#else
+#define FTRACE_OPS_GRAPH_STUB 0
+#endif
+#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
+
/* totally disable ftrace - can not re-enable after this */
void ftrace_kill(void);
diff --git a/kernel/trace/fgraph.c b/kernel/trace/fgraph.c
index b8a0d1d564fb..22061d38fc00 100644
--- a/kernel/trace/fgraph.c
+++ b/kernel/trace/fgraph.c
@@ -115,6 +115,7 @@ int function_graph_enter(unsigned long ret, unsigned long func,
{
struct ftrace_graph_ent trace;
+#ifndef CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS
/*
* Skip graph tracing if the return location is served by direct trampoline,
* since call sequence and return addresses are unpredictable anyway.
@@ -124,6 +125,7 @@ int function_graph_enter(unsigned long ret, unsigned long func,
if (ftrace_direct_func_count &&
ftrace_find_rec_direct(ret - MCOUNT_INSN_SIZE))
return -EBUSY;
+#endif
trace.func = func;
trace.depth = ++current->curr_ret_depth;
@@ -333,10 +335,10 @@ unsigned long ftrace_graph_ret_addr(struct task_struct *task, int *idx,
#endif /* HAVE_FUNCTION_GRAPH_RET_ADDR_PTR */
static struct ftrace_ops graph_ops = {
- .func = ftrace_stub,
+ .func = ftrace_graph_func,
.flags = FTRACE_OPS_FL_INITIALIZED |
FTRACE_OPS_FL_PID |
- FTRACE_OPS_FL_STUB,
+ FTRACE_OPS_GRAPH_STUB,
#ifdef FTRACE_GRAPH_TRAMP_ADDR
.trampoline = FTRACE_GRAPH_TRAMP_ADDR,
/* trampoline_size is only needed for dynamically allocated tramps */
--
2.31.1
Adding interface to modify registered direct function
for ftrace_ops. Adding following function:
modify_ftrace_direct_multi(struct ftrace_ops *ops, unsigned long addr)
The function changes the currently registered direct
function for all attached functions.
Signed-off-by: Jiri Olsa <[email protected]>
---
include/linux/ftrace.h | 6 ++++
kernel/trace/ftrace.c | 62 ++++++++++++++++++++++++++++++++++++++++++
2 files changed, 68 insertions(+)
diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h
index ba5d02ba8166..c15b767f39cf 100644
--- a/include/linux/ftrace.h
+++ b/include/linux/ftrace.h
@@ -318,6 +318,8 @@ int ftrace_modify_direct_caller(struct ftrace_func_entry *entry,
unsigned long ftrace_find_rec_direct(unsigned long ip);
int register_ftrace_direct_multi(struct ftrace_ops *ops, unsigned long addr);
int unregister_ftrace_direct_multi(struct ftrace_ops *ops, unsigned long addr);
+int modify_ftrace_direct_multi(struct ftrace_ops *ops, unsigned long addr);
+
#else
struct ftrace_ops;
# define ftrace_direct_func_count 0
@@ -357,6 +359,10 @@ static inline int unregister_ftrace_direct_multi(struct ftrace_ops *ops, unsigne
{
return -ENODEV;
}
+static inline int modify_ftrace_direct_multi(struct ftrace_ops *ops, unsigned long addr)
+{
+ return -ENODEV;
+}
#endif /* CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS */
#ifndef CONFIG_HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS
diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
index f9df7bffb770..d92f2591c3fc 100644
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -5547,6 +5547,68 @@ int unregister_ftrace_direct_multi(struct ftrace_ops *ops, unsigned long addr)
return err;
}
EXPORT_SYMBOL_GPL(unregister_ftrace_direct_multi);
+
+/**
+ * modify_ftrace_direct_multi - Modify an existing direct 'multi' call
+ * to call something else
+ * @ops: The address of the struct ftrace_ops object
+ * @addr: The address of the new trampoline to call at @ops functions
+ *
+ * This is used to unregister currently registered direct caller and
+ * register new one @addr on functions registered in @ops object.
+ *
+ * Note there's window between ftrace_shutdown and ftrace_startup calls
+ * where there will be no callbacks called.
+ *
+ * Returns: zero on success. Non zero on error, which includes:
+ * -EINVAL - The @ops object was not properly registered.
+ */
+int modify_ftrace_direct_multi(struct ftrace_ops *ops, unsigned long addr)
+{
+ struct ftrace_hash *hash = ops->func_hash->filter_hash;
+ struct ftrace_func_entry *entry, *iter;
+ int i, size;
+ int err;
+
+ if (check_direct_multi(ops))
+ return -EINVAL;
+ if (!(ops->flags & FTRACE_OPS_FL_ENABLED))
+ return -EINVAL;
+
+ mutex_lock(&direct_mutex);
+ mutex_lock(&ftrace_lock);
+
+ /*
+ * Shutdown the ops, change 'direct' pointer for each
+ * ops entry in direct_functions hash and startup the
+ * ops back again.
+ *
+ * Note there is no callback called for @ops object after
+ * this ftrace_shutdown call until ftrace_startup is called
+ * later on.
+ */
+ err = ftrace_shutdown(ops, 0);
+ if (err)
+ goto out_unlock;
+
+ size = 1 << hash->size_bits;
+ for (i = 0; i < size; i++) {
+ hlist_for_each_entry(iter, &hash->buckets[i], hlist) {
+ entry = __ftrace_lookup_ip(direct_functions, iter->ip);
+ if (!entry)
+ continue;
+ entry->direct = addr;
+ }
+ }
+
+ err = ftrace_startup(ops, 0);
+
+ out_unlock:
+ mutex_unlock(&ftrace_lock);
+ mutex_unlock(&direct_mutex);
+ return err;
+}
+EXPORT_SYMBOL_GPL(modify_ftrace_direct_multi);
#endif /* CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS */
/**
--
2.31.1
Adding simple module that uses multi direct interface:
register_ftrace_direct_multi
unregister_ftrace_direct_multi
The init function registers trampoline for 2 functions,
and exit function unregisters them.
Signed-off-by: Jiri Olsa <[email protected]>
---
samples/ftrace/Makefile | 1 +
samples/ftrace/ftrace-direct-multi.c | 52 ++++++++++++++++++++++++++++
2 files changed, 53 insertions(+)
create mode 100644 samples/ftrace/ftrace-direct-multi.c
diff --git a/samples/ftrace/Makefile b/samples/ftrace/Makefile
index 4ce896e10b2e..ab1d1c05c288 100644
--- a/samples/ftrace/Makefile
+++ b/samples/ftrace/Makefile
@@ -3,6 +3,7 @@
obj-$(CONFIG_SAMPLE_FTRACE_DIRECT) += ftrace-direct.o
obj-$(CONFIG_SAMPLE_FTRACE_DIRECT) += ftrace-direct-too.o
obj-$(CONFIG_SAMPLE_FTRACE_DIRECT) += ftrace-direct-modify.o
+obj-$(CONFIG_SAMPLE_FTRACE_DIRECT) += ftrace-direct-multi.o
CFLAGS_sample-trace-array.o := -I$(src)
obj-$(CONFIG_SAMPLE_TRACE_ARRAY) += sample-trace-array.o
diff --git a/samples/ftrace/ftrace-direct-multi.c b/samples/ftrace/ftrace-direct-multi.c
new file mode 100644
index 000000000000..2a5b1fb7ac14
--- /dev/null
+++ b/samples/ftrace/ftrace-direct-multi.c
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include <linux/module.h>
+
+#include <linux/mm.h> /* for handle_mm_fault() */
+#include <linux/ftrace.h>
+#include <linux/sched/stat.h>
+
+void my_direct_func(unsigned long ip)
+{
+ trace_printk("ip %lx\n", ip);
+}
+
+extern void my_tramp(void *);
+
+asm (
+" .pushsection .text, \"ax\", @progbits\n"
+" .type my_tramp, @function\n"
+" .globl my_tramp\n"
+" my_tramp:"
+" pushq %rbp\n"
+" movq %rsp, %rbp\n"
+" pushq %rdi\n"
+" movq 8(%rbp), %rdi\n"
+" call my_direct_func\n"
+" popq %rdi\n"
+" leave\n"
+" ret\n"
+" .size my_tramp, .-my_tramp\n"
+" .popsection\n"
+);
+
+static struct ftrace_ops direct;
+
+static int __init ftrace_direct_multi_init(void)
+{
+ ftrace_set_filter_ip(&direct, (unsigned long) wake_up_process, 0, 0);
+ ftrace_set_filter_ip(&direct, (unsigned long) schedule, 0, 0);
+
+ return register_ftrace_direct_multi(&direct, (unsigned long) my_tramp);
+}
+
+static void __exit ftrace_direct_multi_exit(void)
+{
+ unregister_ftrace_direct_multi(&direct, (unsigned long) my_tramp);
+}
+
+module_init(ftrace_direct_multi_init);
+module_exit(ftrace_direct_multi_exit);
+
+MODULE_AUTHOR("Jiri Olsa");
+MODULE_DESCRIPTION("Example use case of using register_ftrace_direct_multi()");
+MODULE_LICENSE("GPL");
--
2.31.1
Factor out the code that adds (ip, addr) tuple to direct_functions
hash in new ftrace_add_rec_direct function. It will be used in
following patches.
Signed-off-by: Jiri Olsa <[email protected]>
---
kernel/trace/ftrace.c | 64 +++++++++++++++++++++++++------------------
1 file changed, 37 insertions(+), 27 deletions(-)
diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
index 3eec6792f115..6032a5441770 100644
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -2394,6 +2394,39 @@ unsigned long ftrace_find_rec_direct(unsigned long ip)
return entry->direct;
}
+static struct ftrace_func_entry*
+ftrace_add_rec_direct(unsigned long ip, unsigned long addr,
+ struct ftrace_hash **free_hash)
+{
+ struct ftrace_func_entry *entry;
+
+ if (ftrace_hash_empty(direct_functions) ||
+ direct_functions->count > 2 * (1 << direct_functions->size_bits)) {
+ struct ftrace_hash *new_hash;
+ int size = ftrace_hash_empty(direct_functions) ? 0 :
+ direct_functions->count + 1;
+
+ if (size < 32)
+ size = 32;
+
+ new_hash = dup_hash(direct_functions, size);
+ if (!new_hash)
+ return NULL;
+
+ *free_hash = direct_functions;
+ direct_functions = new_hash;
+ }
+
+ entry = kmalloc(sizeof(*entry), GFP_KERNEL);
+ if (!entry)
+ return NULL;
+
+ entry->ip = ip;
+ entry->direct = addr;
+ __add_hash_entry(direct_functions, entry);
+ return entry;
+}
+
static void call_direct_funcs(unsigned long ip, unsigned long pip,
struct ftrace_ops *ops, struct ftrace_regs *fregs)
{
@@ -5110,39 +5143,16 @@ int register_ftrace_direct(unsigned long ip, unsigned long addr)
}
ret = -ENOMEM;
- if (ftrace_hash_empty(direct_functions) ||
- direct_functions->count > 2 * (1 << direct_functions->size_bits)) {
- struct ftrace_hash *new_hash;
- int size = ftrace_hash_empty(direct_functions) ? 0 :
- direct_functions->count + 1;
-
- if (size < 32)
- size = 32;
-
- new_hash = dup_hash(direct_functions, size);
- if (!new_hash)
- goto out_unlock;
-
- free_hash = direct_functions;
- direct_functions = new_hash;
- }
-
- entry = kmalloc(sizeof(*entry), GFP_KERNEL);
- if (!entry)
- goto out_unlock;
-
direct = ftrace_find_direct_func(addr);
if (!direct) {
direct = ftrace_alloc_direct_func(addr);
- if (!direct) {
- kfree(entry);
+ if (!direct)
goto out_unlock;
- }
}
- entry->ip = ip;
- entry->direct = addr;
- __add_hash_entry(direct_functions, entry);
+ entry = ftrace_add_rec_direct(ip, addr, &free_hash);
+ if (!entry)
+ goto out_unlock;
ret = ftrace_set_filter_ip(&direct_ops, ip, 0, 0);
if (ret)
--
2.31.1
Adding selftest for checking that direct trampoline can
co-exist together with graph tracer on same function.
This is supported for CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS
config option, which is defined only for x86_64 for now.
Signed-off-by: Jiri Olsa <[email protected]>
---
kernel/trace/trace_selftest.c | 54 ++++++++++++++++++++++++++++++++++-
1 file changed, 53 insertions(+), 1 deletion(-)
diff --git a/kernel/trace/trace_selftest.c b/kernel/trace/trace_selftest.c
index adf7ef194005..917b7e3bf1ec 100644
--- a/kernel/trace/trace_selftest.c
+++ b/kernel/trace/trace_selftest.c
@@ -750,6 +750,8 @@ static struct fgraph_ops fgraph_ops __initdata = {
.retfunc = &trace_graph_return,
};
+noinline __noclone static void trace_direct_tramp(void) { }
+
/*
* Pretty much the same than for the function tracer from which the selftest
* has been borrowed.
@@ -760,6 +762,7 @@ trace_selftest_startup_function_graph(struct tracer *trace,
{
int ret;
unsigned long count;
+ char *func_name __maybe_unused;
#ifdef CONFIG_DYNAMIC_FTRACE
if (ftrace_filter_param) {
@@ -808,8 +811,57 @@ trace_selftest_startup_function_graph(struct tracer *trace,
goto out;
}
- /* Don't test dynamic tracing, the function tracer already did */
+#ifdef CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS
+ tracing_reset_online_cpus(&tr->array_buffer);
+ set_graph_array(tr);
+
+ /*
+ * Some archs *cough*PowerPC*cough* add characters to the
+ * start of the function names. We simply put a '*' to
+ * accommodate them.
+ */
+ func_name = "*" __stringify(DYN_FTRACE_TEST_NAME);
+ ftrace_set_global_filter(func_name, strlen(func_name), 1);
+
+ /*
+ * Register direct function together with graph tracer
+ * and make sure we get graph trace.
+ */
+ ret = register_ftrace_direct((unsigned long) DYN_FTRACE_TEST_NAME,
+ (unsigned long) trace_direct_tramp);
+ if (ret)
+ goto out;
+
+ ret = register_ftrace_graph(&fgraph_ops);
+ if (ret) {
+ warn_failed_init_tracer(trace, ret);
+ goto out;
+ }
+
+ DYN_FTRACE_TEST_NAME();
+
+ count = 0;
+
+ tracing_stop();
+ /* check the trace buffer */
+ ret = trace_test_buffer(&tr->array_buffer, &count);
+
+ unregister_ftrace_graph(&fgraph_ops);
+
+ ret = unregister_ftrace_direct((unsigned long) DYN_FTRACE_TEST_NAME,
+ (unsigned long) trace_direct_tramp);
+ if (ret)
+ goto out;
+
+ tracing_start();
+ if (!ret && !count) {
+ ret = -1;
+ goto out;
+ }
+#endif
+
+ /* Don't test dynamic tracing, the function tracer already did */
out:
/* Stop it if we failed */
if (ret)
--
2.31.1
Adding interface to register multiple direct functions
within single call. Adding following functions:
register_ftrace_direct_multi(struct ftrace_ops *ops, unsigned long addr)
unregister_ftrace_direct_multi(struct ftrace_ops *ops, unsigned long addr)
The register_ftrace_direct_multi registers direct function (addr)
with all functions in ops filter. The ops filter can be updated
before with ftrace_set_filter_ip calls.
All requested functions must not have direct function currently
registered, otherwise register_ftrace_direct_multi will fail.
The unregister_ftrace_direct_multi unregisters ops related direct
functions.
Signed-off-by: Jiri Olsa <[email protected]>
---
include/linux/ftrace.h | 11 ++++
kernel/trace/ftrace.c | 142 +++++++++++++++++++++++++++++++++++++++++
2 files changed, 153 insertions(+)
diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h
index 1ca60ee70fb0..ba5d02ba8166 100644
--- a/include/linux/ftrace.h
+++ b/include/linux/ftrace.h
@@ -316,7 +316,10 @@ int ftrace_modify_direct_caller(struct ftrace_func_entry *entry,
unsigned long old_addr,
unsigned long new_addr);
unsigned long ftrace_find_rec_direct(unsigned long ip);
+int register_ftrace_direct_multi(struct ftrace_ops *ops, unsigned long addr);
+int unregister_ftrace_direct_multi(struct ftrace_ops *ops, unsigned long addr);
#else
+struct ftrace_ops;
# define ftrace_direct_func_count 0
static inline int register_ftrace_direct(unsigned long ip, unsigned long addr)
{
@@ -346,6 +349,14 @@ static inline unsigned long ftrace_find_rec_direct(unsigned long ip)
{
return 0;
}
+static inline int register_ftrace_direct_multi(struct ftrace_ops *ops, unsigned long addr)
+{
+ return -ENODEV;
+}
+static inline int unregister_ftrace_direct_multi(struct ftrace_ops *ops, unsigned long addr)
+{
+ return -ENODEV;
+}
#endif /* CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS */
#ifndef CONFIG_HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS
diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
index 6032a5441770..f9df7bffb770 100644
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -5405,6 +5405,148 @@ int modify_ftrace_direct(unsigned long ip,
return ret;
}
EXPORT_SYMBOL_GPL(modify_ftrace_direct);
+
+#define MULTI_FLAGS (FTRACE_OPS_FL_IPMODIFY | FTRACE_OPS_FL_DIRECT | \
+ FTRACE_OPS_FL_SAVE_REGS)
+
+static int check_direct_multi(struct ftrace_ops *ops)
+{
+ if (!(ops->flags & FTRACE_OPS_FL_INITIALIZED))
+ return -EINVAL;
+ if ((ops->flags & MULTI_FLAGS) != MULTI_FLAGS)
+ return -EINVAL;
+ return 0;
+}
+
+static void remove_direct_functions_hash(struct ftrace_hash *hash, unsigned long addr)
+{
+ struct ftrace_func_entry *entry, *del;
+ int size, i;
+
+ size = 1 << hash->size_bits;
+ for (i = 0; i < size; i++) {
+ hlist_for_each_entry(entry, &hash->buckets[i], hlist) {
+ del = __ftrace_lookup_ip(direct_functions, entry->ip);
+ if (del && del->direct == addr) {
+ remove_hash_entry(direct_functions, del);
+ kfree(del);
+ }
+ }
+ }
+}
+
+/**
+ * register_ftrace_direct_multi - Call a custom trampoline directly
+ * for multiple functions registered in @ops
+ * @ops: The address of the struct ftrace_ops object
+ * @addr: The address of the trampoline to call at @ops functions
+ *
+ * This is used to connect a direct calls to @addr from the nop locations
+ * of the functions registered in @ops (with by ftrace_set_filter_ip
+ * function).
+ *
+ * The location that it calls (@addr) must be able to handle a direct call,
+ * and save the parameters of the function being traced, and restore them
+ * (or inject new ones if needed), before returning.
+ *
+ * Returns:
+ * 0 on success
+ * -EINVAL - The @ops object was already registered with this call or
+ * when there are no functions in @ops object.
+ * -EBUSY - Another direct function is already attached (there can be only one)
+ * -ENODEV - @ip does not point to a ftrace nop location (or not supported)
+ * -ENOMEM - There was an allocation failure.
+ */
+int register_ftrace_direct_multi(struct ftrace_ops *ops, unsigned long addr)
+{
+ struct ftrace_hash *hash, *free_hash = NULL;
+ struct ftrace_func_entry *entry, *new;
+ int err = -EBUSY, size, i;
+
+ if (ops->func || ops->trampoline)
+ return -EINVAL;
+ if (!(ops->flags & FTRACE_OPS_FL_INITIALIZED))
+ return -EINVAL;
+ if (ops->flags & FTRACE_OPS_FL_ENABLED)
+ return -EINVAL;
+
+ hash = ops->func_hash->filter_hash;
+ if (ftrace_hash_empty(hash))
+ return -EINVAL;
+
+ mutex_lock(&direct_mutex);
+
+ /* Make sure requested entries are not already registered.. */
+ size = 1 << hash->size_bits;
+ for (i = 0; i < size; i++) {
+ hlist_for_each_entry(entry, &hash->buckets[i], hlist) {
+ if (ftrace_find_rec_direct(entry->ip))
+ goto out_unlock;
+ }
+ }
+
+ /* ... and insert them to direct_functions hash. */
+ err = -ENOMEM;
+ for (i = 0; i < size; i++) {
+ hlist_for_each_entry(entry, &hash->buckets[i], hlist) {
+ new = ftrace_add_rec_direct(entry->ip, addr, &free_hash);
+ if (!new)
+ goto out_remove;
+ entry->direct = addr;
+ }
+ }
+
+ ops->func = call_direct_funcs;
+ ops->flags = MULTI_FLAGS;
+ ops->trampoline = FTRACE_REGS_ADDR;
+
+ err = register_ftrace_function(ops);
+
+ out_remove:
+ if (err)
+ remove_direct_functions_hash(hash, addr);
+
+ out_unlock:
+ mutex_unlock(&direct_mutex);
+
+ if (free_hash) {
+ synchronize_rcu_tasks();
+ free_ftrace_hash(free_hash);
+ }
+ return err;
+}
+EXPORT_SYMBOL_GPL(register_ftrace_direct_multi);
+
+/**
+ * unregister_ftrace_direct_multi - Remove calls to custom trampoline
+ * previously registered by register_ftrace_direct_multi for @ops object.
+ * @ops: The address of the struct ftrace_ops object
+ *
+ * This is used to remove a direct calls to @addr from the nop locations
+ * of the functions registered in @ops (with by ftrace_set_filter_ip
+ * function).
+ *
+ * Returns:
+ * 0 on success
+ * -EINVAL - The @ops object was not properly registered.
+ */
+int unregister_ftrace_direct_multi(struct ftrace_ops *ops, unsigned long addr)
+{
+ struct ftrace_hash *hash = ops->func_hash->filter_hash;
+ int err;
+
+ if (check_direct_multi(ops))
+ return -EINVAL;
+ if (!(ops->flags & FTRACE_OPS_FL_ENABLED))
+ return -EINVAL;
+
+ mutex_lock(&direct_mutex);
+ err = unregister_ftrace_function(ops);
+ remove_direct_functions_hash(hash, addr);
+ mutex_unlock(&direct_mutex);
+ return err;
+}
+EXPORT_SYMBOL_GPL(unregister_ftrace_direct_multi);
#endif /* CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS */
/**
--
2.31.1
On Fri, Oct 08, 2021 at 11:13:28AM +0200, Jiri Olsa wrote:
> hi,
> adding interface to maintain multiple direct functions
> within single calls. It's a base for follow up bpf batch
> attach functionality.
...
> ---
> Jiri Olsa (6):
> x86/ftrace: Remove extra orig rax move
> tracing: Add trampoline/graph selftest
> ftrace: Add ftrace_add_rec_direct function
> ftrace: Add multi direct register/unregister interface
> ftrace: Add multi direct modify interface
> ftrace/samples: Add multi direct interface test module
>
> Steven Rostedt (VMware) (2):
> x86/ftrace: Remove fault protection code in prepare_ftrace_return
> x86/ftrace: Make function graph use ftrace directly
>
> arch/x86/include/asm/ftrace.h | 9 +++-
> arch/x86/kernel/ftrace.c | 71 +++++++++++++++---------------
> arch/x86/kernel/ftrace_64.S | 30 +------------
> include/linux/ftrace.h | 26 +++++++++++
> kernel/trace/fgraph.c | 6 ++-
> kernel/trace/ftrace.c | 268 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++------------
> kernel/trace/trace_selftest.c | 54 ++++++++++++++++++++++-
> samples/ftrace/Makefile | 1 +
> samples/ftrace/ftrace-direct-multi.c | 52 ++++++++++++++++++++++
> 9 files changed, 420 insertions(+), 97 deletions(-)
> create mode 100644 samples/ftrace/ftrace-direct-multi.c
FWIW, Steven pointed me to this thread since I posted
DYNAMIC_FTRACE_WITH_DIRECT_CALL support for s390 here:
https://lore.kernel.org/all/[email protected]/
Since Jiri asked for it: please feel free to add
Tested-by: Heiko Carstens <[email protected]>
to all non-x86 patches.
On Wed, Oct 13, 2021 at 11:01:34AM +0200, Heiko Carstens wrote:
> On Fri, Oct 08, 2021 at 11:13:28AM +0200, Jiri Olsa wrote:
> > hi,
> > adding interface to maintain multiple direct functions
> > within single calls. It's a base for follow up bpf batch
> > attach functionality.
> ...
> > ---
> > Jiri Olsa (6):
> > x86/ftrace: Remove extra orig rax move
> > tracing: Add trampoline/graph selftest
> > ftrace: Add ftrace_add_rec_direct function
> > ftrace: Add multi direct register/unregister interface
> > ftrace: Add multi direct modify interface
> > ftrace/samples: Add multi direct interface test module
> >
> > Steven Rostedt (VMware) (2):
> > x86/ftrace: Remove fault protection code in prepare_ftrace_return
> > x86/ftrace: Make function graph use ftrace directly
> >
> > arch/x86/include/asm/ftrace.h | 9 +++-
> > arch/x86/kernel/ftrace.c | 71 +++++++++++++++---------------
> > arch/x86/kernel/ftrace_64.S | 30 +------------
> > include/linux/ftrace.h | 26 +++++++++++
> > kernel/trace/fgraph.c | 6 ++-
> > kernel/trace/ftrace.c | 268 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++------------
> > kernel/trace/trace_selftest.c | 54 ++++++++++++++++++++++-
> > samples/ftrace/Makefile | 1 +
> > samples/ftrace/ftrace-direct-multi.c | 52 ++++++++++++++++++++++
> > 9 files changed, 420 insertions(+), 97 deletions(-)
> > create mode 100644 samples/ftrace/ftrace-direct-multi.c
>
> FWIW, Steven pointed me to this thread since I posted
> DYNAMIC_FTRACE_WITH_DIRECT_CALL support for s390 here:
> https://lore.kernel.org/all/[email protected]/
>
> Since Jiri asked for it: please feel free to add
> Tested-by: Heiko Carstens <[email protected]>
> to all non-x86 patches.
>
thanks,
jirka
On Fri, 8 Oct 2021 11:13:35 +0200
Jiri Olsa <[email protected]> wrote:
> + /*
> + * Shutdown the ops, change 'direct' pointer for each
> + * ops entry in direct_functions hash and startup the
> + * ops back again.
> + *
> + * Note there is no callback called for @ops object after
> + * this ftrace_shutdown call until ftrace_startup is called
> + * later on.
> + */
> + err = ftrace_shutdown(ops, 0);
> + if (err)
> + goto out_unlock;
I believe I said before that we can do this by adding a stub ops that match
all the functions with the direct ops being modified. This will cause the
loop function to be called, which will call the direct function helper,
which will then call the direct function that is found. That is, there is
no "pause" in calling the direct callers. Either the old direct is called,
or the new one. When the function returns, all are calling the new one.
That is, instead of:
[ Changing direct call from my_direct_1 to my_direct_2 ]
<traced_func>:
call my_direct_1
||||||||||||||||||||
vvvvvvvvvvvvvvvvvvvv
<traced_func>:
nop
||||||||||||||||||||
vvvvvvvvvvvvvvvvvvvv
<traced_func>:
call my_direct_2
We have it do:
<traced_func>:
call my_direct_1
||||||||||||||||||||
vvvvvvvvvvvvvvvvvvvv
<traced_func>:
call ftrace_caller
<ftrace_caller>:
[..]
call ftrace_ops_list_func
ftrace_ops_list_func()
{
ops->func() -> direct_helper -> set rax to my_direct_1 or my_direct_2
}
call rax (to either my_direct_1 or my_direct_2
||||||||||||||||||||
vvvvvvvvvvvvvvvvvvvv
<traced_func>:
call my_direct_2
I did this on top of this patch:
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
---
kernel/trace/ftrace.c | 33 ++++++++++++++++++++-------------
1 file changed, 20 insertions(+), 13 deletions(-)
diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
index 30120342176e..7ad1e8ae5855 100644
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -5561,8 +5561,12 @@ EXPORT_SYMBOL_GPL(unregister_ftrace_direct_multi);
*/
int modify_ftrace_direct_multi(struct ftrace_ops *ops, unsigned long addr)
{
- struct ftrace_hash *hash = ops->func_hash->filter_hash;
+ struct ftrace_hash *hash;
struct ftrace_func_entry *entry, *iter;
+ static struct ftrace_ops tmp_ops = {
+ .func = ftrace_stub,
+ .flags = FTRACE_OPS_FL_STUB,
+ };
int i, size;
int err;
@@ -5572,21 +5576,22 @@ int modify_ftrace_direct_multi(struct ftrace_ops *ops, unsigned long addr)
return -EINVAL;
mutex_lock(&direct_mutex);
- mutex_lock(&ftrace_lock);
+
+ /* Enable the tmp_ops to have the same functions as the direct ops */
+ ftrace_ops_init(&tmp_ops);
+ tmp_ops.func_hash = ops->func_hash;
+
+ err = register_ftrace_function(&tmp_ops);
+ if (err)
+ goto out_direct;
/*
- * Shutdown the ops, change 'direct' pointer for each
- * ops entry in direct_functions hash and startup the
- * ops back again.
- *
- * Note there is no callback called for @ops object after
- * this ftrace_shutdown call until ftrace_startup is called
- * later on.
+ * Now the ftrace_ops_list_func() is called to do the direct callers.
+ * We can safely change the direct functions attached to each entry.
*/
- err = ftrace_shutdown(ops, 0);
- if (err)
- goto out_unlock;
+ mutex_lock(&ftrace_lock);
+ hash = ops->func_hash->filter_hash;
size = 1 << hash->size_bits;
for (i = 0; i < size; i++) {
hlist_for_each_entry(iter, &hash->buckets[i], hlist) {
@@ -5597,10 +5602,12 @@ int modify_ftrace_direct_multi(struct ftrace_ops *ops, unsigned long addr)
}
}
- err = ftrace_startup(ops, 0);
+ /* Removing the tmp_ops will add the updated direct callers to the functions */
+ unregister_ftrace_function(&tmp_ops);
out_unlock:
mutex_unlock(&ftrace_lock);
+ out_direct:
mutex_unlock(&direct_mutex);
return err;
}
--
2.31.1
On Thu, Oct 14, 2021 at 04:28:19PM -0400, Steven Rostedt wrote:
> On Fri, 8 Oct 2021 11:13:35 +0200
> Jiri Olsa <[email protected]> wrote:
>
> > + /*
> > + * Shutdown the ops, change 'direct' pointer for each
> > + * ops entry in direct_functions hash and startup the
> > + * ops back again.
> > + *
> > + * Note there is no callback called for @ops object after
> > + * this ftrace_shutdown call until ftrace_startup is called
> > + * later on.
> > + */
> > + err = ftrace_shutdown(ops, 0);
> > + if (err)
> > + goto out_unlock;
>
> I believe I said before that we can do this by adding a stub ops that match
> all the functions with the direct ops being modified. This will cause the
> loop function to be called, which will call the direct function helper,
> which will then call the direct function that is found. That is, there is
> no "pause" in calling the direct callers. Either the old direct is called,
> or the new one. When the function returns, all are calling the new one.
>
> That is, instead of:
>
> [ Changing direct call from my_direct_1 to my_direct_2 ]
>
> <traced_func>:
> call my_direct_1
>
> ||||||||||||||||||||
> vvvvvvvvvvvvvvvvvvvv
>
> <traced_func>:
> nop
>
> ||||||||||||||||||||
> vvvvvvvvvvvvvvvvvvvv
>
> <traced_func>:
> call my_direct_2
>
>
> We have it do:
>
> <traced_func>:
> call my_direct_1
>
> ||||||||||||||||||||
> vvvvvvvvvvvvvvvvvvvv
>
> <traced_func>:
> call ftrace_caller
>
>
> <ftrace_caller>:
> [..]
> call ftrace_ops_list_func
>
>
> ftrace_ops_list_func()
> {
> ops->func() -> direct_helper -> set rax to my_direct_1 or my_direct_2
> }
>
> call rax (to either my_direct_1 or my_direct_2
nice! :) I did not see that as a problem and something that can be
done later, thanks for doing this
>
> ||||||||||||||||||||
> vvvvvvvvvvvvvvvvvvvv
>
> <traced_func>:
> call my_direct_2
>
>
> I did this on top of this patch:
ATM I'm bit stuck on the bpf side of this whole change, I'll test
it with my other changes when I unstuck myself ;-)
thanks,
jirka
>
> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
> ---
> kernel/trace/ftrace.c | 33 ++++++++++++++++++++-------------
> 1 file changed, 20 insertions(+), 13 deletions(-)
>
> diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
> index 30120342176e..7ad1e8ae5855 100644
> --- a/kernel/trace/ftrace.c
> +++ b/kernel/trace/ftrace.c
> @@ -5561,8 +5561,12 @@ EXPORT_SYMBOL_GPL(unregister_ftrace_direct_multi);
> */
> int modify_ftrace_direct_multi(struct ftrace_ops *ops, unsigned long addr)
> {
> - struct ftrace_hash *hash = ops->func_hash->filter_hash;
> + struct ftrace_hash *hash;
> struct ftrace_func_entry *entry, *iter;
> + static struct ftrace_ops tmp_ops = {
> + .func = ftrace_stub,
> + .flags = FTRACE_OPS_FL_STUB,
> + };
> int i, size;
> int err;
>
> @@ -5572,21 +5576,22 @@ int modify_ftrace_direct_multi(struct ftrace_ops *ops, unsigned long addr)
> return -EINVAL;
>
> mutex_lock(&direct_mutex);
> - mutex_lock(&ftrace_lock);
> +
> + /* Enable the tmp_ops to have the same functions as the direct ops */
> + ftrace_ops_init(&tmp_ops);
> + tmp_ops.func_hash = ops->func_hash;
> +
> + err = register_ftrace_function(&tmp_ops);
> + if (err)
> + goto out_direct;
>
> /*
> - * Shutdown the ops, change 'direct' pointer for each
> - * ops entry in direct_functions hash and startup the
> - * ops back again.
> - *
> - * Note there is no callback called for @ops object after
> - * this ftrace_shutdown call until ftrace_startup is called
> - * later on.
> + * Now the ftrace_ops_list_func() is called to do the direct callers.
> + * We can safely change the direct functions attached to each entry.
> */
> - err = ftrace_shutdown(ops, 0);
> - if (err)
> - goto out_unlock;
> + mutex_lock(&ftrace_lock);
>
> + hash = ops->func_hash->filter_hash;
> size = 1 << hash->size_bits;
> for (i = 0; i < size; i++) {
> hlist_for_each_entry(iter, &hash->buckets[i], hlist) {
> @@ -5597,10 +5602,12 @@ int modify_ftrace_direct_multi(struct ftrace_ops *ops, unsigned long addr)
> }
> }
>
> - err = ftrace_startup(ops, 0);
> + /* Removing the tmp_ops will add the updated direct callers to the functions */
> + unregister_ftrace_function(&tmp_ops);
>
> out_unlock:
> mutex_unlock(&ftrace_lock);
> + out_direct:
> mutex_unlock(&direct_mutex);
> return err;
> }
> --
> 2.31.1
>
On Fri, 15 Oct 2021 14:05:25 +0200
Jiri Olsa <[email protected]> wrote:
> ATM I'm bit stuck on the bpf side of this whole change, I'll test
> it with my other changes when I unstuck myself ;-)
If you want, I'll apply this as a separate change on top of your patch set.
As I don't see anything wrong with your current code.
And when you are satisfied with this, just give me a "tested-by" and I'll
push it too.
-- Steve
On Fri, Oct 15, 2021 at 10:05:09AM -0400, Steven Rostedt wrote:
> On Fri, 15 Oct 2021 14:05:25 +0200
> Jiri Olsa <[email protected]> wrote:
>
> > ATM I'm bit stuck on the bpf side of this whole change, I'll test
> > it with my other changes when I unstuck myself ;-)
>
> If you want, I'll apply this as a separate change on top of your patch set.
> As I don't see anything wrong with your current code.
>
> And when you are satisfied with this, just give me a "tested-by" and I'll
> push it too.
sounds great, thanks
jirka
On Sat, 16 Oct 2021 13:39:55 +0200
Jiri Olsa <[email protected]> wrote:
> On Fri, Oct 15, 2021 at 10:05:09AM -0400, Steven Rostedt wrote:
> > On Fri, 15 Oct 2021 14:05:25 +0200
> > Jiri Olsa <[email protected]> wrote:
> >
> > > ATM I'm bit stuck on the bpf side of this whole change, I'll test
> > > it with my other changes when I unstuck myself ;-)
> >
> > If you want, I'll apply this as a separate change on top of your patch set.
> > As I don't see anything wrong with your current code.
> >
> > And when you are satisfied with this, just give me a "tested-by" and I'll
> > push it too.
>
> sounds great, thanks
> jirka
Would you want to ack/review this?
-- Steve
From: "Steven Rostedt (VMware)" <[email protected]>
Subject: [PATCH] ftrace/direct: Do not disable when switching direct callers
Currently to switch a set of "multi" direct trampolines from one
trampoline to another, a full shutdown of the current set needs to be
done, followed by an update to what trampoline the direct callers would
call, and then re-enabling the callers. This leaves a time when the
functions will not be calling anything, and events may be missed.
Instead, use a trick to allow all the functions with direct trampolines
attached will always call either the new or old trampoline while the
switch is happening. To do this, first attach a "dummy" callback via
ftrace to all the functions that the current direct trampoline is attached
to. This will cause the functions to call the "list func" instead of the
direct trampoline. The list function will call the direct trampoline
"helper" that will set the function it should call as it returns back to
the ftrace trampoline.
At this moment, the direct caller descriptor can safely update the direct
call trampoline. The list function will pick either the new or old
function (depending on the memory coherency model of the architecture).
Now removing the dummy function from each of the locations of the direct
trampoline caller, will put back the direct call, but now to the new
trampoline.
A better visual is:
[ Changing direct call from my_direct_1 to my_direct_2 ]
<traced_func>:
call my_direct_1
||||||||||||||||||||
vvvvvvvvvvvvvvvvvvvv
<traced_func>:
call ftrace_caller
<ftrace_caller>:
[..]
call ftrace_ops_list_func
ftrace_ops_list_func()
{
ops->func() -> direct_helper -> set rax to my_direct_1 or my_direct_2
}
call rax (to either my_direct_1 or my_direct_2
||||||||||||||||||||
vvvvvvvvvvvvvvvvvvvv
<traced_func>:
call my_direct_2
Link: https://lore.kernel.org/all/[email protected]/
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
---
kernel/trace/ftrace.c | 33 ++++++++++++++++++++-------------
1 file changed, 20 insertions(+), 13 deletions(-)
diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
index 30120342176e..7ad1e8ae5855 100644
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -5561,8 +5561,12 @@ EXPORT_SYMBOL_GPL(unregister_ftrace_direct_multi);
*/
int modify_ftrace_direct_multi(struct ftrace_ops *ops, unsigned long addr)
{
- struct ftrace_hash *hash = ops->func_hash->filter_hash;
+ struct ftrace_hash *hash;
struct ftrace_func_entry *entry, *iter;
+ static struct ftrace_ops tmp_ops = {
+ .func = ftrace_stub,
+ .flags = FTRACE_OPS_FL_STUB,
+ };
int i, size;
int err;
@@ -5572,21 +5576,22 @@ int modify_ftrace_direct_multi(struct ftrace_ops *ops, unsigned long addr)
return -EINVAL;
mutex_lock(&direct_mutex);
- mutex_lock(&ftrace_lock);
+
+ /* Enable the tmp_ops to have the same functions as the direct ops */
+ ftrace_ops_init(&tmp_ops);
+ tmp_ops.func_hash = ops->func_hash;
+
+ err = register_ftrace_function(&tmp_ops);
+ if (err)
+ goto out_direct;
/*
- * Shutdown the ops, change 'direct' pointer for each
- * ops entry in direct_functions hash and startup the
- * ops back again.
- *
- * Note there is no callback called for @ops object after
- * this ftrace_shutdown call until ftrace_startup is called
- * later on.
+ * Now the ftrace_ops_list_func() is called to do the direct callers.
+ * We can safely change the direct functions attached to each entry.
*/
- err = ftrace_shutdown(ops, 0);
- if (err)
- goto out_unlock;
+ mutex_lock(&ftrace_lock);
+ hash = ops->func_hash->filter_hash;
size = 1 << hash->size_bits;
for (i = 0; i < size; i++) {
hlist_for_each_entry(iter, &hash->buckets[i], hlist) {
@@ -5597,10 +5602,12 @@ int modify_ftrace_direct_multi(struct ftrace_ops *ops, unsigned long addr)
}
}
- err = ftrace_startup(ops, 0);
+ /* Removing the tmp_ops will add the updated direct callers to the functions */
+ unregister_ftrace_function(&tmp_ops);
out_unlock:
mutex_unlock(&ftrace_lock);
+ out_direct:
mutex_unlock(&direct_mutex);
return err;
}
--
2.31.1
On Mon, Oct 18, 2021 at 10:10:15PM -0400, Steven Rostedt wrote:
> On Sat, 16 Oct 2021 13:39:55 +0200
> Jiri Olsa <[email protected]> wrote:
>
> > On Fri, Oct 15, 2021 at 10:05:09AM -0400, Steven Rostedt wrote:
> > > On Fri, 15 Oct 2021 14:05:25 +0200
> > > Jiri Olsa <[email protected]> wrote:
> > >
> > > > ATM I'm bit stuck on the bpf side of this whole change, I'll test
> > > > it with my other changes when I unstuck myself ;-)
> > >
> > > If you want, I'll apply this as a separate change on top of your patch set.
> > > As I don't see anything wrong with your current code.
> > >
> > > And when you are satisfied with this, just give me a "tested-by" and I'll
> > > push it too.
> >
> > sounds great, thanks
> > jirka
>
> Would you want to ack/review this?
hum, do you have it in some branch already? I'm getting:
patching file kernel/trace/ftrace.c
Hunk #1 succeeded at 5521 with fuzz 1 (offset -40 lines).
Hunk #2 FAILED at 5576.
Hunk #3 succeeded at 5557 (offset -44 lines).
1 out of 3 hunks FAILED -- saving rejects to file kernel/trace/ftrace.c.rej
when trying to apply on top of my changes
thanks,
jirka
>
> -- Steve
>
> From: "Steven Rostedt (VMware)" <[email protected]>
> Subject: [PATCH] ftrace/direct: Do not disable when switching direct callers
>
> Currently to switch a set of "multi" direct trampolines from one
> trampoline to another, a full shutdown of the current set needs to be
> done, followed by an update to what trampoline the direct callers would
> call, and then re-enabling the callers. This leaves a time when the
> functions will not be calling anything, and events may be missed.
>
> Instead, use a trick to allow all the functions with direct trampolines
> attached will always call either the new or old trampoline while the
> switch is happening. To do this, first attach a "dummy" callback via
> ftrace to all the functions that the current direct trampoline is attached
> to. This will cause the functions to call the "list func" instead of the
> direct trampoline. The list function will call the direct trampoline
> "helper" that will set the function it should call as it returns back to
> the ftrace trampoline.
>
> At this moment, the direct caller descriptor can safely update the direct
> call trampoline. The list function will pick either the new or old
> function (depending on the memory coherency model of the architecture).
>
> Now removing the dummy function from each of the locations of the direct
> trampoline caller, will put back the direct call, but now to the new
> trampoline.
>
> A better visual is:
>
> [ Changing direct call from my_direct_1 to my_direct_2 ]
>
> <traced_func>:
> call my_direct_1
>
> ||||||||||||||||||||
> vvvvvvvvvvvvvvvvvvvv
>
> <traced_func>:
> call ftrace_caller
>
> <ftrace_caller>:
> [..]
> call ftrace_ops_list_func
>
> ftrace_ops_list_func()
> {
> ops->func() -> direct_helper -> set rax to my_direct_1 or my_direct_2
> }
>
> call rax (to either my_direct_1 or my_direct_2
>
> ||||||||||||||||||||
> vvvvvvvvvvvvvvvvvvvv
>
> <traced_func>:
> call my_direct_2
>
> Link: https://lore.kernel.org/all/[email protected]/
>
> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
> ---
> kernel/trace/ftrace.c | 33 ++++++++++++++++++++-------------
> 1 file changed, 20 insertions(+), 13 deletions(-)
>
> diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
> index 30120342176e..7ad1e8ae5855 100644
> --- a/kernel/trace/ftrace.c
> +++ b/kernel/trace/ftrace.c
> @@ -5561,8 +5561,12 @@ EXPORT_SYMBOL_GPL(unregister_ftrace_direct_multi);
> */
> int modify_ftrace_direct_multi(struct ftrace_ops *ops, unsigned long addr)
> {
> - struct ftrace_hash *hash = ops->func_hash->filter_hash;
> + struct ftrace_hash *hash;
> struct ftrace_func_entry *entry, *iter;
> + static struct ftrace_ops tmp_ops = {
> + .func = ftrace_stub,
> + .flags = FTRACE_OPS_FL_STUB,
> + };
> int i, size;
> int err;
>
> @@ -5572,21 +5576,22 @@ int modify_ftrace_direct_multi(struct ftrace_ops *ops, unsigned long addr)
> return -EINVAL;
>
> mutex_lock(&direct_mutex);
> - mutex_lock(&ftrace_lock);
> +
> + /* Enable the tmp_ops to have the same functions as the direct ops */
> + ftrace_ops_init(&tmp_ops);
> + tmp_ops.func_hash = ops->func_hash;
> +
> + err = register_ftrace_function(&tmp_ops);
> + if (err)
> + goto out_direct;
>
> /*
> - * Shutdown the ops, change 'direct' pointer for each
> - * ops entry in direct_functions hash and startup the
> - * ops back again.
> - *
> - * Note there is no callback called for @ops object after
> - * this ftrace_shutdown call until ftrace_startup is called
> - * later on.
> + * Now the ftrace_ops_list_func() is called to do the direct callers.
> + * We can safely change the direct functions attached to each entry.
> */
> - err = ftrace_shutdown(ops, 0);
> - if (err)
> - goto out_unlock;
> + mutex_lock(&ftrace_lock);
>
> + hash = ops->func_hash->filter_hash;
> size = 1 << hash->size_bits;
> for (i = 0; i < size; i++) {
> hlist_for_each_entry(iter, &hash->buckets[i], hlist) {
> @@ -5597,10 +5602,12 @@ int modify_ftrace_direct_multi(struct ftrace_ops *ops, unsigned long addr)
> }
> }
>
> - err = ftrace_startup(ops, 0);
> + /* Removing the tmp_ops will add the updated direct callers to the functions */
> + unregister_ftrace_function(&tmp_ops);
>
> out_unlock:
> mutex_unlock(&ftrace_lock);
> + out_direct:
> mutex_unlock(&direct_mutex);
> return err;
> }
> --
> 2.31.1
>
On Tue, Oct 19, 2021 at 03:19:48PM +0200, Jiri Olsa wrote:
> On Mon, Oct 18, 2021 at 10:10:15PM -0400, Steven Rostedt wrote:
> > On Sat, 16 Oct 2021 13:39:55 +0200
> > Jiri Olsa <[email protected]> wrote:
> >
> > > On Fri, Oct 15, 2021 at 10:05:09AM -0400, Steven Rostedt wrote:
> > > > On Fri, 15 Oct 2021 14:05:25 +0200
> > > > Jiri Olsa <[email protected]> wrote:
> > > >
> > > > > ATM I'm bit stuck on the bpf side of this whole change, I'll test
> > > > > it with my other changes when I unstuck myself ;-)
> > > >
> > > > If you want, I'll apply this as a separate change on top of your patch set.
> > > > As I don't see anything wrong with your current code.
> > > >
> > > > And when you are satisfied with this, just give me a "tested-by" and I'll
> > > > push it too.
> > >
> > > sounds great, thanks
> > > jirka
> >
> > Would you want to ack/review this?
>
> hum, do you have it in some branch already? I'm getting:
>
> patching file kernel/trace/ftrace.c
> Hunk #1 succeeded at 5521 with fuzz 1 (offset -40 lines).
> Hunk #2 FAILED at 5576.
> Hunk #3 succeeded at 5557 (offset -44 lines).
> 1 out of 3 hunks FAILED -- saving rejects to file kernel/trace/ftrace.c.rej
>
>
> when trying to apply on top of my changes
I updated my ftrace/direct branch, it actually still had the previous
version.. sorry, perhaps this is the cause of fuzz
jirka
>
> thanks,
> jirka
>
> >
> > -- Steve
> >
> > From: "Steven Rostedt (VMware)" <[email protected]>
> > Subject: [PATCH] ftrace/direct: Do not disable when switching direct callers
> >
> > Currently to switch a set of "multi" direct trampolines from one
> > trampoline to another, a full shutdown of the current set needs to be
> > done, followed by an update to what trampoline the direct callers would
> > call, and then re-enabling the callers. This leaves a time when the
> > functions will not be calling anything, and events may be missed.
> >
> > Instead, use a trick to allow all the functions with direct trampolines
> > attached will always call either the new or old trampoline while the
> > switch is happening. To do this, first attach a "dummy" callback via
> > ftrace to all the functions that the current direct trampoline is attached
> > to. This will cause the functions to call the "list func" instead of the
> > direct trampoline. The list function will call the direct trampoline
> > "helper" that will set the function it should call as it returns back to
> > the ftrace trampoline.
> >
> > At this moment, the direct caller descriptor can safely update the direct
> > call trampoline. The list function will pick either the new or old
> > function (depending on the memory coherency model of the architecture).
> >
> > Now removing the dummy function from each of the locations of the direct
> > trampoline caller, will put back the direct call, but now to the new
> > trampoline.
> >
> > A better visual is:
> >
> > [ Changing direct call from my_direct_1 to my_direct_2 ]
> >
> > <traced_func>:
> > call my_direct_1
> >
> > ||||||||||||||||||||
> > vvvvvvvvvvvvvvvvvvvv
> >
> > <traced_func>:
> > call ftrace_caller
> >
> > <ftrace_caller>:
> > [..]
> > call ftrace_ops_list_func
> >
> > ftrace_ops_list_func()
> > {
> > ops->func() -> direct_helper -> set rax to my_direct_1 or my_direct_2
> > }
> >
> > call rax (to either my_direct_1 or my_direct_2
> >
> > ||||||||||||||||||||
> > vvvvvvvvvvvvvvvvvvvv
> >
> > <traced_func>:
> > call my_direct_2
> >
> > Link: https://lore.kernel.org/all/[email protected]/
> >
> > Signed-off-by: Steven Rostedt (VMware) <[email protected]>
> > ---
> > kernel/trace/ftrace.c | 33 ++++++++++++++++++++-------------
> > 1 file changed, 20 insertions(+), 13 deletions(-)
> >
> > diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
> > index 30120342176e..7ad1e8ae5855 100644
> > --- a/kernel/trace/ftrace.c
> > +++ b/kernel/trace/ftrace.c
> > @@ -5561,8 +5561,12 @@ EXPORT_SYMBOL_GPL(unregister_ftrace_direct_multi);
> > */
> > int modify_ftrace_direct_multi(struct ftrace_ops *ops, unsigned long addr)
> > {
> > - struct ftrace_hash *hash = ops->func_hash->filter_hash;
> > + struct ftrace_hash *hash;
> > struct ftrace_func_entry *entry, *iter;
> > + static struct ftrace_ops tmp_ops = {
> > + .func = ftrace_stub,
> > + .flags = FTRACE_OPS_FL_STUB,
> > + };
> > int i, size;
> > int err;
> >
> > @@ -5572,21 +5576,22 @@ int modify_ftrace_direct_multi(struct ftrace_ops *ops, unsigned long addr)
> > return -EINVAL;
> >
> > mutex_lock(&direct_mutex);
> > - mutex_lock(&ftrace_lock);
> > +
> > + /* Enable the tmp_ops to have the same functions as the direct ops */
> > + ftrace_ops_init(&tmp_ops);
> > + tmp_ops.func_hash = ops->func_hash;
> > +
> > + err = register_ftrace_function(&tmp_ops);
> > + if (err)
> > + goto out_direct;
> >
> > /*
> > - * Shutdown the ops, change 'direct' pointer for each
> > - * ops entry in direct_functions hash and startup the
> > - * ops back again.
> > - *
> > - * Note there is no callback called for @ops object after
> > - * this ftrace_shutdown call until ftrace_startup is called
> > - * later on.
> > + * Now the ftrace_ops_list_func() is called to do the direct callers.
> > + * We can safely change the direct functions attached to each entry.
> > */
> > - err = ftrace_shutdown(ops, 0);
> > - if (err)
> > - goto out_unlock;
> > + mutex_lock(&ftrace_lock);
> >
> > + hash = ops->func_hash->filter_hash;
> > size = 1 << hash->size_bits;
> > for (i = 0; i < size; i++) {
> > hlist_for_each_entry(iter, &hash->buckets[i], hlist) {
> > @@ -5597,10 +5602,12 @@ int modify_ftrace_direct_multi(struct ftrace_ops *ops, unsigned long addr)
> > }
> > }
> >
> > - err = ftrace_startup(ops, 0);
> > + /* Removing the tmp_ops will add the updated direct callers to the functions */
> > + unregister_ftrace_function(&tmp_ops);
> >
> > out_unlock:
> > mutex_unlock(&ftrace_lock);
> > + out_direct:
> > mutex_unlock(&direct_mutex);
> > return err;
> > }
> > --
> > 2.31.1
> >
On Tue, 19 Oct 2021 15:26:21 +0200
Jiri Olsa <[email protected]> wrote:
> > when trying to apply on top of my changes
>
> I updated my ftrace/direct branch, it actually still had the previous
> version.. sorry, perhaps this is the cause of fuzz
I just pushed it (including your patches) here:
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace.git
ftrace/core
This is where I keep my WIP code. It should not be used to base anything
off of, as I rebase it constantly. But it has the current version I plan on
testing.
You can make sure the patches in there have your latest version, as you can
review my patch. I'll update the tags if you give me one.
-- Steve
On Tue, Oct 19, 2021 at 09:32:16AM -0400, Steven Rostedt wrote:
> On Tue, 19 Oct 2021 15:26:21 +0200
> Jiri Olsa <[email protected]> wrote:
>
> > > when trying to apply on top of my changes
> >
> > I updated my ftrace/direct branch, it actually still had the previous
> > version.. sorry, perhaps this is the cause of fuzz
>
> I just pushed it (including your patches) here:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace.git
>
> ftrace/core
>
>
> This is where I keep my WIP code. It should not be used to base anything
> off of, as I rebase it constantly. But it has the current version I plan on
> testing.
>
> You can make sure the patches in there have your latest version, as you can
> review my patch. I'll update the tags if you give me one.
I'm getting error when compiling:
CC kernel/trace/ftrace.o
kernel/trace/ftrace.c: In function ‘modify_ftrace_direct_multi’:
kernel/trace/ftrace.c:5608:2: error: label ‘out_unlock’ defined but not used [-Werror=unused-label]
5608 | out_unlock:
| ^~~~~~~~~~
looks like out_unlock is nolonger needed, I removed it
jirka
On Tue, 19 Oct 2021 16:03:03 +0200
Jiri Olsa <[email protected]> wrote:
> > You can make sure the patches in there have your latest version, as you can
> > review my patch. I'll update the tags if you give me one.
>
> I'm getting error when compiling:
>
> CC kernel/trace/ftrace.o
> kernel/trace/ftrace.c: In function ‘modify_ftrace_direct_multi’:
> kernel/trace/ftrace.c:5608:2: error: label ‘out_unlock’ defined but not used [-Werror=unused-label]
Ah, I don't think I've been hit by the "-Werror" yet ;-)
> 5608 | out_unlock:
> | ^~~~~~~~~~
>
> looks like out_unlock is nolonger needed, I removed it
My tests would have found this, as it has a check for "new warnings".
Anyway, was this in your latest patch, or did I pull in and older one?
That is, should I expect a v2 from you?
-- Steve
On Tue, Oct 19, 2021 at 10:44:11AM -0400, Steven Rostedt wrote:
> On Tue, 19 Oct 2021 16:03:03 +0200
> Jiri Olsa <[email protected]> wrote:
>
> > > You can make sure the patches in there have your latest version, as you can
> > > review my patch. I'll update the tags if you give me one.
> >
> > I'm getting error when compiling:
> >
> > CC kernel/trace/ftrace.o
> > kernel/trace/ftrace.c: In function ‘modify_ftrace_direct_multi’:
> > kernel/trace/ftrace.c:5608:2: error: label ‘out_unlock’ defined but not used [-Werror=unused-label]
>
> Ah, I don't think I've been hit by the "-Werror" yet ;-)
>
>
> > 5608 | out_unlock:
> > | ^~~~~~~~~~
> >
> > looks like out_unlock is nolonger needed, I removed it
>
> My tests would have found this, as it has a check for "new warnings".
>
> Anyway, was this in your latest patch, or did I pull in and older one?
>
> That is, should I expect a v2 from you?
it's on top of your ftrace/core, in your change:
e62d91d8206e ftrace/direct: Do not disable when switching direct callers
just removing the label will fix it
also you can add my ack
Acked-by: Jiri Olsa <[email protected]>
thanks,
jirka
On Fri, Oct 08, 2021 at 11:13:36AM +0200, Jiri Olsa wrote:
> Adding simple module that uses multi direct interface:
>
> register_ftrace_direct_multi
> unregister_ftrace_direct_multi
>
> The init function registers trampoline for 2 functions,
> and exit function unregisters them.
>
> Signed-off-by: Jiri Olsa <[email protected]>
Building s390:defconfig ... failed
--------------
Error log:
<stdin>:1559:2: warning: #warning syscall futex_waitv not implemented [-Wcpp]
{standard input}: Assembler messages:
{standard input}:11: Error: Unrecognized opcode: `pushq'
{standard input}:12: Error: Unrecognized opcode: `movq'
{standard input}:13: Error: Unrecognized opcode: `pushq'
{standard input}:14: Error: Unrecognized opcode: `movq'
{standard input}:15: Error: Unrecognized opcode: `call'
{standard input}:16: Error: Unrecognized opcode: `popq'
{standard input}:17: Error: Unrecognized opcode: `leave'
{standard input}:18: Error: Unrecognized opcode: `ret'
make[3]: *** [scripts/Makefile.build:288: samples/ftrace/ftrace-direct-multi.o] Error 1
make[2]: *** [scripts/Makefile.build:571: samples/ftrace] Error 2
make[1]: *** [Makefile:1993: samples] Error 2
make[1]: *** Waiting for unfinished jobs....
make: *** [Makefile:226: __sub-make] Error 2
Guenter
> ---
> samples/ftrace/Makefile | 1 +
> samples/ftrace/ftrace-direct-multi.c | 52 ++++++++++++++++++++++++++++
> 2 files changed, 53 insertions(+)
> create mode 100644 samples/ftrace/ftrace-direct-multi.c
>
> diff --git a/samples/ftrace/Makefile b/samples/ftrace/Makefile
> index 4ce896e10b2e..ab1d1c05c288 100644
> --- a/samples/ftrace/Makefile
> +++ b/samples/ftrace/Makefile
> @@ -3,6 +3,7 @@
> obj-$(CONFIG_SAMPLE_FTRACE_DIRECT) += ftrace-direct.o
> obj-$(CONFIG_SAMPLE_FTRACE_DIRECT) += ftrace-direct-too.o
> obj-$(CONFIG_SAMPLE_FTRACE_DIRECT) += ftrace-direct-modify.o
> +obj-$(CONFIG_SAMPLE_FTRACE_DIRECT) += ftrace-direct-multi.o
>
> CFLAGS_sample-trace-array.o := -I$(src)
> obj-$(CONFIG_SAMPLE_TRACE_ARRAY) += sample-trace-array.o
> diff --git a/samples/ftrace/ftrace-direct-multi.c b/samples/ftrace/ftrace-direct-multi.c
> new file mode 100644
> index 000000000000..2a5b1fb7ac14
> --- /dev/null
> +++ b/samples/ftrace/ftrace-direct-multi.c
> @@ -0,0 +1,52 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +#include <linux/module.h>
> +
> +#include <linux/mm.h> /* for handle_mm_fault() */
> +#include <linux/ftrace.h>
> +#include <linux/sched/stat.h>
> +
> +void my_direct_func(unsigned long ip)
> +{
> + trace_printk("ip %lx\n", ip);
> +}
> +
> +extern void my_tramp(void *);
> +
> +asm (
> +" .pushsection .text, \"ax\", @progbits\n"
> +" .type my_tramp, @function\n"
> +" .globl my_tramp\n"
> +" my_tramp:"
> +" pushq %rbp\n"
> +" movq %rsp, %rbp\n"
> +" pushq %rdi\n"
> +" movq 8(%rbp), %rdi\n"
> +" call my_direct_func\n"
> +" popq %rdi\n"
> +" leave\n"
> +" ret\n"
> +" .size my_tramp, .-my_tramp\n"
> +" .popsection\n"
> +);
> +
> +static struct ftrace_ops direct;
> +
> +static int __init ftrace_direct_multi_init(void)
> +{
> + ftrace_set_filter_ip(&direct, (unsigned long) wake_up_process, 0, 0);
> + ftrace_set_filter_ip(&direct, (unsigned long) schedule, 0, 0);
> +
> + return register_ftrace_direct_multi(&direct, (unsigned long) my_tramp);
> +}
> +
> +static void __exit ftrace_direct_multi_exit(void)
> +{
> + unregister_ftrace_direct_multi(&direct, (unsigned long) my_tramp);
> +}
> +
> +module_init(ftrace_direct_multi_init);
> +module_exit(ftrace_direct_multi_exit);
> +
> +MODULE_AUTHOR("Jiri Olsa");
> +MODULE_DESCRIPTION("Example use case of using register_ftrace_direct_multi()");
> +MODULE_LICENSE("GPL");
> --
> 2.31.1
>
On Tue, 26 Oct 2021 12:23:09 -0700
Guenter Roeck <[email protected]> wrote:
> On Fri, Oct 08, 2021 at 11:13:36AM +0200, Jiri Olsa wrote:
> > Adding simple module that uses multi direct interface:
> >
> > register_ftrace_direct_multi
> > unregister_ftrace_direct_multi
> >
> > The init function registers trampoline for 2 functions,
> > and exit function unregisters them.
> >
> > Signed-off-by: Jiri Olsa <[email protected]>
>
> Building s390:defconfig ... failed
> --------------
> Error log:
> <stdin>:1559:2: warning: #warning syscall futex_waitv not implemented [-Wcpp]
> {standard input}: Assembler messages:
> {standard input}:11: Error: Unrecognized opcode: `pushq'
> {standard input}:12: Error: Unrecognized opcode: `movq'
> {standard input}:13: Error: Unrecognized opcode: `pushq'
> {standard input}:14: Error: Unrecognized opcode: `movq'
> {standard input}:15: Error: Unrecognized opcode: `call'
> {standard input}:16: Error: Unrecognized opcode: `popq'
> {standard input}:17: Error: Unrecognized opcode: `leave'
> {standard input}:18: Error: Unrecognized opcode: `ret'
> make[3]: *** [scripts/Makefile.build:288: samples/ftrace/ftrace-direct-multi.o] Error 1
> make[2]: *** [scripts/Makefile.build:571: samples/ftrace] Error 2
> make[1]: *** [Makefile:1993: samples] Error 2
> make[1]: *** Waiting for unfinished jobs....
> make: *** [Makefile:226: __sub-make] Error 2
>
>
https://lore.kernel.org/all/YXAqZ%2FEszRisunQw@osiris/
-- Steve