This is the start of the stable review cycle for the 4.14.256 release.
There are 251 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Fri, 26 Nov 2021 11:56:36 +0000.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.256-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 4.14.256-rc1
Nadav Amit <[email protected]>
hugetlbfs: flush TLBs correctly after huge_pmd_unshare
Uwe Kleine-König <[email protected]>
usb: max-3421: Use driver data instead of maintaining a list of bound devices
Takashi Iwai <[email protected]>
ASoC: DAPM: Cover regression by kctl change notification fix
Leon Romanovsky <[email protected]>
RDMA/netlink: Add __maybe_unused to static inline in C file
Sven Eckelmann <[email protected]>
batman-adv: Don't always reallocate the fragmentation skb head
Sven Eckelmann <[email protected]>
batman-adv: Reserve needed_*room for fragments
Sven Eckelmann <[email protected]>
batman-adv: Consider fragmentation for needed_headroom
Linus Lüssing <[email protected]>
batman-adv: mcast: fix duplicate mcast packets from BLA backbone to mesh
Linus Lüssing <[email protected]>
batman-adv: mcast: fix duplicate mcast packets in BLA backbone from LAN
Greg Thelen <[email protected]>
perf/core: Avoid put_page() when GUP fails
hongao <[email protected]>
drm/amdgpu: fix set scaling mode Full/Full aspect/Center not works on vga and dvi connectors
Johan Hovold <[email protected]>
drm/udl: fix control-message timeout
Nguyen Dinh Phi <[email protected]>
cfg80211: call cfg80211_stop_ap when switch from P2P_GO type
Sven Schnelle <[email protected]>
parisc/sticon: fix reverse colors
Nikolay Borisov <[email protected]>
btrfs: fix memory ordering between normal and ordered work functions
Rustam Kovhaev <[email protected]>
mm: kmemleak: slob: respect SLAB_NOLEAKTRACE flag
Nathan Chancellor <[email protected]>
hexagon: export raw I/O routines for modules
Nicolas Dichtel <[email protected]>
tun: fix bonding active backup with arp monitoring
Alexander Antonov <[email protected]>
perf/x86/intel/uncore: Fix IIO event constraints for Skylake Server
Alexander Antonov <[email protected]>
perf/x86/intel/uncore: Fix filter_tid mask for CHA events on Skylake Server
Sohaib Mohamed <[email protected]>
perf bench: Fix two memory leaks detected with ASan
Lin Ma <[email protected]>
NFC: reorder the logic in nfc_{un,}register_device
Lin Ma <[email protected]>
NFC: reorganize the functions in nci_request
Michal Maloszewski <[email protected]>
i40e: Fix NULL ptr dereference on VSI filter sync
Jonathan Davies <[email protected]>
net: virtio_net_hdr_to_skb: count transport header in UFO
Christophe JAILLET <[email protected]>
platform/x86: hp_accel: Fix an error handling path in 'lis3lv02d_probe()'
Randy Dunlap <[email protected]>
mips: lantiq: add support for clk_get_parent()
Randy Dunlap <[email protected]>
mips: bcm63xx: add support for clk_get_parent()
Colin Ian King <[email protected]>
MIPS: generic/yamon-dt: fix uninitialized variable error
Surabhi Boob <[email protected]>
iavf: Fix for the false positive ASQ/ARQ errors while issuing VF reset
Pavel Skripkin <[email protected]>
net: bnx2x: fix variable dereferenced before check
Vincent Donnefort <[email protected]>
sched/core: Mitigate race cpus_share_cache()/update_top_cache_domain()
Randy Dunlap <[email protected]>
mips: BCM63XX: ensure that CPU_SUPPORTS_32BIT_KERNEL is set
Randy Dunlap <[email protected]>
sh: define __BIG_ENDIAN for math-emu
Randy Dunlap <[email protected]>
sh: fix kconfig unmet dependency warning for FRAME_POINTER
Lu Wei <[email protected]>
maple: fix wrong return value of maple_bus_init().
Nick Desaulniers <[email protected]>
sh: check return code of request_irq
Michael Ellerman <[email protected]>
powerpc/dcr: Use cmplwi instead of 3-argument cmpli
Chengfeng Ye <[email protected]>
ALSA: gus: fix null pointer dereference on pointer block
Anatolij Gustschin <[email protected]>
powerpc/5200: dts: fix memory node unit name
Mike Christie <[email protected]>
scsi: target: Fix alua_tg_pt_gps_count tracking
Mike Christie <[email protected]>
scsi: target: Fix ordered tag handling
Bart Van Assche <[email protected]>
MIPS: sni: Fix the build
Guanghui Feng <[email protected]>
tty: tty_buffer: Fix the softlockup issue in flush_to_ldisc
Yang Yingliang <[email protected]>
usb: host: ohci-tmio: check return value after calling platform_get_resource()
Roger Quadros <[email protected]>
ARM: dts: omap: fix gpmc,mux-add-data type
Guo Zhi <[email protected]>
scsi: advansys: Fix kernel pointer leak
Yang Yingliang <[email protected]>
usb: musb: tusb6010: check return value after calling platform_get_resource()
James Smart <[email protected]>
scsi: lpfc: Fix list_add() corruption in lpfc_drain_txq()
Michal Simek <[email protected]>
arm64: zynqmp: Fix serial compatible string
Thomas Gleixner <[email protected]>
PCI/MSI: Destroy sysfs before freeing entries
Sven Schnelle <[email protected]>
parisc/entry: fix trace test in syscall exit path
Paul Burton <[email protected]>
tracing: Resize tgid_map to pid_max, not PID_MAX_DEFAULT
Shaoying Xu <[email protected]>
ext4: fix lazy initialization next schedule time computation in more granular unit
Pali Rohár <[email protected]>
PCI: Add PCI_EXP_DEVCTL_PAYLOAD_* macros
Vineeth Vijayan <[email protected]>
s390/cio: check the subchannel validity for dev_busid
Michal Hocko <[email protected]>
mm, oom: do not trigger out_of_memory from the #PF
Vasily Averin <[email protected]>
mm, oom: pagefault_out_of_memory: don't force global OOM for dying tasks
Naveen N. Rao <[email protected]>
powerpc/bpf: Fix BPF_SUB when imm == 0x80000000
Naveen N. Rao <[email protected]>
powerpc/bpf: Validate branch ranges
Naveen N. Rao <[email protected]>
powerpc/lib: Add helper to check if offset is within conditional branch range
Arnd Bergmann <[email protected]>
ARM: 9156/1: drop cc-option fallbacks for architecture selection
Michał Mirosław <[email protected]>
ARM: 9155/1: fix early early_iounmap()
Johan Hovold <[email protected]>
USB: chipidea: fix interrupt deadlock
Eiichi Tsukata <[email protected]>
vsock: prevent unnecessary refcnt inc for nonblocking connect
Chengfeng Ye <[email protected]>
nfc: pn533: Fix double free when pn533_fill_fragment_skbs() fails
Eric Dumazet <[email protected]>
llc: fix out-of-bound array index in llc_sk_dev_hash()
Miaohe Lin <[email protected]>
mm/zsmalloc.c: close race window between zs_pool_dec_isolated() and zs_unregister_migration()
Huang Guobin <[email protected]>
bonding: Fix a use-after-free problem when bond_sysfs_slave_add() failed
Hans de Goede <[email protected]>
ACPI: PMIC: Fix intel_pmic_regs_handler() read accesses
Ziyang Xuan <[email protected]>
net: vlan: fix a UAF in vlan_dev_real_dev()
Maxim Kiselev <[email protected]>
net: davinci_emac: Fix interrupt pacing disable
YueHaibing <[email protected]>
xen-pciback: Fix return in pm_ctrl_init()
Christophe JAILLET <[email protected]>
i2c: xlr: Fix a resource leak in the error handling path of 'xlr_i2c_probe()'
Quinn Tran <[email protected]>
scsi: qla2xxx: Turn off target reset during issue_lip
Jackie Liu <[email protected]>
ar7: fix kernel builds for compiler test
Ahmad Fatoum <[email protected]>
watchdog: f71808e_wdt: fix inaccurate report in WDIOC_GETTIMEOUT
Randy Dunlap <[email protected]>
m68k: set a default value for MEMORY_RESERVE
Lars-Peter Clausen <[email protected]>
dmaengine: dmaengine_desc_callback_valid(): Check for `callback_result`
Florian Westphal <[email protected]>
netfilter: nfnetlink_queue: fix OOB when mac header was cleared
Geert Uytterhoeven <[email protected]>
auxdisplay: ht16k33: Fix frame buffer device blanking
Geert Uytterhoeven <[email protected]>
auxdisplay: ht16k33: Connect backlight to fbdev
Geert Uytterhoeven <[email protected]>
auxdisplay: img-ascii-lcd: Fix lock-up when displaying empty string
Claudiu Beznea <[email protected]>
dmaengine: at_xdmac: fix AT_XDMAC_CC_PERID() macro
Evgeny Novikov <[email protected]>
mtd: spi-nor: hisi-sfc: Remove excessive clk_disable_unprepare()
Jia-Ju Bai <[email protected]>
fs: orangefs: fix error return code of orangefs_revalidate_lookup()
Trond Myklebust <[email protected]>
NFS: Fix deadlocks in nfs_scan_commit_list()
Marek Behún <[email protected]>
PCI: aardvark: Don't spam about PIO Response Status
Alex Xu (Hello71) <[email protected]>
drm/plane-helper: fix uninitialized variable reference
Baptiste Lepers <[email protected]>
pnfs/flexfiles: Fix misplaced barrier in nfs4_ff_layout_prepare_ds
Arnaud Pouliquen <[email protected]>
rpmsg: Fix rpmsg_create_ept return when RPMSG config is not defined
Tom Rix <[email protected]>
apparmor: fix error check
Hans de Goede <[email protected]>
power: supply: bq27xxx: Fix kernel crash on IRQ handler register error
Geert Uytterhoeven <[email protected]>
mips: cm: Convert to bitfield API to fix out-of-bounds access
Anssi Hannula <[email protected]>
serial: xilinx_uartps: Fix race condition causing stuck TX
Richard Fitzgerald <[email protected]>
ASoC: cs42l42: Defer probe if request_threaded_irq() returns EPROBE_DEFER
Richard Fitzgerald <[email protected]>
ASoC: cs42l42: Correct some register default values
Leon Romanovsky <[email protected]>
RDMA/mlx4: Return missed an error if device doesn't support steering
Dan Carpenter <[email protected]>
scsi: csiostor: Uninitialized data in csio_ln_vnp_read_cbfn()
Jakob Hauser <[email protected]>
power: supply: rt5033_battery: Change voltage values to µV
Dan Carpenter <[email protected]>
usb: gadget: hid: fix error code in do_config()
Andy Shevchenko <[email protected]>
serial: 8250_dw: Drop wrong use of ACPI_PTR()
Christophe Leroy <[email protected]>
video: fbdev: chipsfb: use memset_io() instead of memset()
Dongliang Mu <[email protected]>
memory: fsl_ifc: fix leak of irq and nand_irq in fsl_ifc_ctrl_probe
Christophe JAILLET <[email protected]>
soc/tegra: Fix an error handling path in tegra_powergate_power_up()
Andreas Kemnade <[email protected]>
arm: dts: omap3-gta04a4: accelerometer irq fix
Takashi Iwai <[email protected]>
ALSA: hda: Reduce udelay() at SKL+ position reporting
Dongliang Mu <[email protected]>
JFS: fix memleak in jfs_mount
Jackie Liu <[email protected]>
MIPS: loongson64: make CPU_LOONGSON64 depends on MIPS_FP_SUPPORT
Tong Zhang <[email protected]>
scsi: dc395: Fix error case unwinding
Peter Rosin <[email protected]>
ARM: dts: at91: tse850: the emac<->phy interface is rmii
Jackie Liu <[email protected]>
ARM: s3c: irq-s3c24xx: Fix return value check for s3c24xx_init_intc()
Junji Wei <[email protected]>
RDMA/rxe: Fix wrong port_cap_flags
Sukadev Bhattiprolu <[email protected]>
ibmvnic: Process crqs after enabling interrupts
Daniel Jordan <[email protected]>
crypto: pcrypt - Delay write to padata->info
Russell King (Oracle) <[email protected]>
net: phylink: avoid mvneta warning when setting pause parameters
Shyam Sundar S K <[email protected]>
net: amd-xgbe: Toggle PLL settings during rate change
Wang Hai <[email protected]>
libertas: Fix possible memory leak in probe and disconnect
Wang Hai <[email protected]>
libertas_tf: Fix possible memory leak in probe and disconnect
Tiezhu Yang <[email protected]>
samples/kretprobes: Fix return value if register_kretprobe() failed
Mark Rutland <[email protected]>
irq: mips: avoid nested irq_enter()
David Hildenbrand <[email protected]>
s390/gmap: don't unconditionally call pte_unmap_unlock() in __gmap_zap()
Tetsuo Handa <[email protected]>
smackfs: use netlbl_cfg_cipsov4_del() for deleting cipso_v4_doi
Anders Roxell <[email protected]>
PM: hibernate: fix sparse warnings
Stefan Agner <[email protected]>
phy: micrel: ksz8041nl: do not use power down mode
Jonas Dreßler <[email protected]>
mwifiex: Send DELBA requests according to spec
Nathan Chancellor <[email protected]>
platform/x86: thinkpad_acpi: Fix bitwise vs. logical warning
Christophe JAILLET <[email protected]>
mmc: mxs-mmc: disable regulator on error and in the remove function
Jakub Kicinski <[email protected]>
net: stream: don't purge sk_error_queue in sk_stream_kill_queues()
Dan Carpenter <[email protected]>
drm/msm: uninitialized variable in msm_gem_import()
Sven Eckelmann <[email protected]>
ath10k: fix max antenna gain unit
Yang Yingliang <[email protected]>
hwmon: Fix possible memleak in __hwmon_device_register()
Dan Carpenter <[email protected]>
memstick: jmb38x_ms: use appropriate free function in jmb38x_ms_alloc_host()
Arnd Bergmann <[email protected]>
memstick: avoid out-of-range warning
Dan Carpenter <[email protected]>
b43: fix a lower bounds test
Dan Carpenter <[email protected]>
b43legacy: fix a lower bounds test
Markus Schneider-Pargmann <[email protected]>
hwrng: mtk - Force runtime pm ops for sleep ops
Giovanni Cabiddu <[email protected]>
crypto: qat - disregard spurious PFVF interrupts
Giovanni Cabiddu <[email protected]>
crypto: qat - detect PFVF collision after ACK
Linus Lüssing <[email protected]>
ath9k: Fix potential interrupt storm on queue reset
Anel Orazgaliyeva <[email protected]>
cpuidle: Fix kobject memory leaks in error paths
Colin Ian King <[email protected]>
media: cx23885: Fix snd_card_free call on null card pointer
Kees Cook <[email protected]>
media: si470x: Avoid card name truncation
Christophe JAILLET <[email protected]>
media: mtk-vpu: Fix a resource leak in the error handling path of 'mtk_vpu_probe()'
Pavel Skripkin <[email protected]>
media: dvb-usb: fix ununit-value in az6027_rc_query
Waiman Long <[email protected]>
cgroup: Make rebind_subsystems() disable v2 controllers all at once
Sven Schnelle <[email protected]>
parisc/kgdb: add kgdb_roundup() to make kgdb work with idle polling
Helge Deller <[email protected]>
task_stack: Fix end_of_stack() for architectures with upwards-growing stack
Sven Schnelle <[email protected]>
parisc: fix warning in flush_tlb_all
Yang Yingliang <[email protected]>
spi: bcm-qspi: Fix missing clk_disable_unprepare() on error in bcm_qspi_probe()
Arnd Bergmann <[email protected]>
ARM: 9136/1: ARMv7-M uses BE-8, not BE-32
Stephen Suryaputra <[email protected]>
gre/sit: Don't generate link-local addr if addr_gen_mode is IN6_ADDR_GEN_MODE_NONE
Masami Hiramatsu <[email protected]>
ARM: clang: Do not rely on lr register for stacktrace
Tetsuo Handa <[email protected]>
smackfs: use __GFP_NOFAIL for smk_cipso_doi()
Johannes Berg <[email protected]>
iwlwifi: mvm: disable RX-diversity in powersave
Ye Bin <[email protected]>
PM: hibernate: Get block device exclusively in swsusp_check()
Zheyu Ma <[email protected]>
mwl8k: Fix use-after-free in mwl8k_fw_state_machine()
Kalesh Singh <[email protected]>
tracing/cfi: Fix cmp_entries_* functions signature mismatch
Lasse Collin <[email protected]>
lib/xz: Validate the value before assigning it to an enum variable
Lasse Collin <[email protected]>
lib/xz: Avoid overlapping memcpy() with invalid input with in-place decompression
Zheyu Ma <[email protected]>
memstick: r592: Fix a UAF bug when removing the driver
Kees Cook <[email protected]>
leaking_addresses: Always print a trailing newline
André Almeida <[email protected]>
ACPI: battery: Accept charges over the design capacity as full
Tuo Li <[email protected]>
ath: dfs_pattern_detector: Fix possible null-pointer dereference in channel_detector_create()
Steven Rostedt (VMware) <[email protected]>
tracefs: Have tracefs directories not set OTH permission bits by default
Anant Thazhemadam <[email protected]>
media: usb: dvd-usb: fix uninit-value bug in dibusb_read_eeprom_byte()
Rafael J. Wysocki <[email protected]>
ACPICA: Avoid evaluating methods too early during system resume
Randy Dunlap <[email protected]>
ia64: don't do IA64_CMPXCHG_DEBUG without CONFIG_PRINTK
Rajat Asthana <[email protected]>
media: mceusb: return without resubmitting URB in case of -EPROTO error.
Nadezda Lutovinova <[email protected]>
media: s5p-mfc: Add checking to s5p_mfc_probe().
Tuo Li <[email protected]>
media: s5p-mfc: fix possible null-pointer dereference in s5p_mfc_probe()
Ricardo Ribalda <[email protected]>
media: uvcvideo: Set capability in s_param
Zheyu Ma <[email protected]>
media: netup_unidvb: handle interrupt properly according to the firmware
Dirk Bender <[email protected]>
media: mt9p031: Fix corrupted frame after restarting stream
Jonas Dreßler <[email protected]>
mwifiex: Properly initialize private structure on interface type changes
Jonas Dreßler <[email protected]>
mwifiex: Run SET_BSS_MODE when changing from P2P to STATION vif-type
Peter Zijlstra <[email protected]>
x86: Increase exception stack sizes
Pawan Gupta <[email protected]>
smackfs: Fix use-after-free in netlbl_catmap_walk()
Peter Zijlstra <[email protected]>
locking/lockdep: Avoid RCU-induced noinstr fail
Aleksander Jan Bajkowski <[email protected]>
MIPS: lantiq: dma: reset correct number of channel
Aleksander Jan Bajkowski <[email protected]>
MIPS: lantiq: dma: add small delay after reset
Barnabás Pőcze <[email protected]>
platform/x86: wmi: do not fail if disabling fails
Wang ShaoBo <[email protected]>
Bluetooth: fix use-after-free error in lock_sock_nested()
Takashi Iwai <[email protected]>
Bluetooth: sco: Fix lock_sock() blockage by memcpy_from_msg()
Johan Hovold <[email protected]>
USB: iowarrior: fix control-message timeouts
Wang Hai <[email protected]>
USB: serial: keyspan: fix memleak on probe errors
Pekka Korpinen <[email protected]>
iio: dac: ad5446: Fix ad5622_write() return value
Yang Yingliang <[email protected]>
pinctrl: core: fix possible memory leak in pinctrl_enable()
Zhang Yi <[email protected]>
quota: correct error number in free_dqentry()
Zhang Yi <[email protected]>
quota: check block number when reading the block in quota file
Marek Behún <[email protected]>
PCI: aardvark: Read all 16-bits from PCIE_MSI_PAYLOAD_REG
Marek Behún <[email protected]>
PCI: aardvark: Fix return value of MSI domain .alloc() method
Pali Rohár <[email protected]>
PCI: aardvark: Do not unmask unused interrupts
Pali Rohár <[email protected]>
PCI: aardvark: Do not clear status bits of masked interrupts
Juergen Gross <[email protected]>
xen/balloon: add late_initcall_sync() for initial ballooning done
Pavel Skripkin <[email protected]>
ALSA: mixer: fix deadlock in snd_mixer_oss_set_volume
Takashi Iwai <[email protected]>
ALSA: mixer: oss: Fix racy access to slots
Pali Rohár <[email protected]>
serial: core: Fix initializing and restoring termios speed
Xiaoming Ni <[email protected]>
powerpc/85xx: Fix oops when mpc85xx_smp_guts_ids node cannot be found
Henrik Grimler <[email protected]>
power: supply: max17042_battery: use VFSOC for capacity when no rsns
Sebastian Krzyszkowiak <[email protected]>
power: supply: max17042_battery: Prevent int underflow in set_soc_threshold
Eric W. Biederman <[email protected]>
signal/mips: Update (_save|_restore)_fp_context to fail with -EFAULT
Eric W. Biederman <[email protected]>
signal: Remove the bogus sigkill_pending in ptrace_stop
Alok Prasad <[email protected]>
RDMA/qedr: Fix NULL deref for query_qp on the GSI QP
Benjamin Li <[email protected]>
wcn36xx: handle connection loss indication
Reimar Döffinger <[email protected]>
libata: fix checking of DMA state
Jonas Dreßler <[email protected]>
mwifiex: Read a PCI register after writing the TX ring write pointer
Loic Poulain <[email protected]>
wcn36xx: Fix HT40 capability for 2Ghz band
Austin Kim <[email protected]>
evm: mark evm_fixmode as __ro_after_init
Johan Hovold <[email protected]>
rtl8187: fix control-message timeouts
Ingmar Klein <[email protected]>
PCI: Mark Atheros QCA6174 to avoid bus reset
Johan Hovold <[email protected]>
ath10k: fix division by zero in send path
Johan Hovold <[email protected]>
ath10k: fix control-message timeout
Johan Hovold <[email protected]>
ath6kl: fix control-message timeout
Johan Hovold <[email protected]>
ath6kl: fix division by zero in send path
Johan Hovold <[email protected]>
mwifiex: fix division by zero in fw download path
Eric Badger <[email protected]>
EDAC/sb_edac: Fix top-of-high-memory value for Broadwell/Haswell
Krzysztof Kozlowski <[email protected]>
regulator: dt-bindings: samsung,s5m8767: correct s5m8767,pmic-buck-default-dvs-idx property
Krzysztof Kozlowski <[email protected]>
regulator: s5m8767: do not use reset value as DVS voltage if GPIO DVS is disabled
Zev Weiss <[email protected]>
hwmon: (pmbus/lm25066) Add offset coefficients
Filipe Manana <[email protected]>
btrfs: fix lost error handling when replaying directory deletes
Dongli Zhang <[email protected]>
vmxnet3: do not stop tx queues after netif_device_detach()
Walter Stoll <[email protected]>
watchdog: Fix OMAP watchdog early handling
Thomas Perrot <[email protected]>
spi: spl022: fix Microwire full duplex mode
Dongli Zhang <[email protected]>
xen/netfront: stop tx queues during live migration
Lorenz Bauer <[email protected]>
bpf: Prevent increasing bpf_jit_limit above max
Randy Dunlap <[email protected]>
mmc: winbond: don't build on M68K
Arnd Bergmann <[email protected]>
hyperv/vmbus: include linux/bitops.h
Erik Ekman <[email protected]>
sfc: Don't use netif_info before net_device setup
Zheyu Ma <[email protected]>
cavium: Fix return values of the probe function
Dmitry Bogdanov <[email protected]>
scsi: qla2xxx: Fix unmap of already freed sgl
Zheyu Ma <[email protected]>
cavium: Return negative value when pci_alloc_irq_vectors() fails
Sean Christopherson <[email protected]>
x86/irq: Ensure PI wakeup handler is unregistered before module unload
Miklos Szeredi <[email protected]>
fuse: fix page stealing
Takashi Iwai <[email protected]>
ALSA: timer: Unconditionally unlink slave instances, too
Wang Wensheng <[email protected]>
ALSA: timer: Fix use-after-free problem
Austin Kim <[email protected]>
ALSA: synth: missing check for possible NULL after the call to kstrdup
Johan Hovold <[email protected]>
ALSA: line6: fix control and interrupt message timeouts
Johan Hovold <[email protected]>
ALSA: 6fire: fix control and bulk message timeouts
Johan Hovold <[email protected]>
ALSA: ua101: fix division by zero at probe
Sean Young <[email protected]>
media: ite-cir: IR receiver stop working after receive overflow
Dan Carpenter <[email protected]>
tpm: Check for integer overflow in tpm2_map_response_body()
Helge Deller <[email protected]>
parisc: Fix ptrace check on syscall return
Christian Löhle <[email protected]>
mmc: dw_mmc: Dont wait for DRTO on Write RSP error
Jan Kara <[email protected]>
ocfs2: fix data corruption on truncate
Damien Le Moal <[email protected]>
libata: fix read log timeout value
Takashi Iwai <[email protected]>
Input: i8042 - Add quirk for Fujitsu Lifebook T725
Phoenix Huang <[email protected]>
Input: elantench - fix misreporting trackpoint coordinates
Todd Kjos <[email protected]>
binder: use cred instead of task for selinux checks
Todd Kjos <[email protected]>
binder: use euid from cred instead of using task
Mathias Nyman <[email protected]>
xhci: Fix USB 3.1 enumeration issues by increasing roothub power-on-good delay
-------------
Diffstat:
Documentation/admin-guide/kernel-parameters.txt | 7 ++
.../bindings/regulator/samsung,s5m8767.txt | 23 ++---
Makefile | 4 +-
arch/arm/Makefile | 22 ++---
arch/arm/boot/dts/at91-tse850-3.dts | 2 +-
arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi | 2 +-
arch/arm/boot/dts/omap3-gta04.dtsi | 2 +-
arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi | 2 +-
arch/arm/kernel/stacktrace.c | 3 +-
arch/arm/mm/Kconfig | 2 +-
arch/arm/mm/mmu.c | 4 +-
arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 4 +-
arch/hexagon/lib/io.c | 4 +
arch/ia64/Kconfig.debug | 2 +-
arch/m68k/Kconfig.machine | 1 +
arch/mips/Kconfig | 4 +
arch/mips/bcm63xx/clk.c | 6 ++
arch/mips/generic/yamon-dt.c | 2 +-
arch/mips/include/asm/mips-cm.h | 12 +--
arch/mips/kernel/mips-cm.c | 21 ++---
arch/mips/kernel/r2300_fpu.S | 4 +-
arch/mips/kernel/syscall.c | 9 --
arch/mips/lantiq/clk.c | 6 ++
arch/mips/lantiq/xway/dma.c | 14 ++-
arch/mips/sni/time.c | 4 +-
arch/parisc/kernel/entry.S | 4 +-
arch/parisc/kernel/smp.c | 19 +++-
arch/parisc/mm/init.c | 4 +-
arch/powerpc/boot/dts/charon.dts | 2 +-
arch/powerpc/boot/dts/digsy_mtc.dts | 2 +-
arch/powerpc/boot/dts/lite5200.dts | 2 +-
arch/powerpc/boot/dts/lite5200b.dts | 2 +-
arch/powerpc/boot/dts/media5200.dts | 2 +-
arch/powerpc/boot/dts/mpc5200b.dtsi | 2 +-
arch/powerpc/boot/dts/o2d.dts | 2 +-
arch/powerpc/boot/dts/o2d.dtsi | 2 +-
arch/powerpc/boot/dts/o2dnt2.dts | 2 +-
arch/powerpc/boot/dts/o3dnt.dts | 2 +-
arch/powerpc/boot/dts/pcm032.dts | 2 +-
arch/powerpc/boot/dts/tqm5200.dts | 2 +-
arch/powerpc/include/asm/code-patching.h | 1 +
arch/powerpc/lib/code-patching.c | 7 +-
arch/powerpc/net/bpf_jit.h | 33 ++++---
arch/powerpc/net/bpf_jit_comp64.c | 37 +++++---
arch/powerpc/platforms/85xx/mpc85xx_pm_ops.c | 3 +-
arch/powerpc/sysdev/dcr-low.S | 2 +-
arch/s390/mm/gmap.c | 5 +-
arch/sh/Kconfig.debug | 1 +
arch/sh/include/asm/sfp-machine.h | 8 ++
arch/sh/kernel/cpu/sh4a/smp-shx3.c | 5 +-
arch/x86/events/intel/uncore_snbep.c | 4 +
arch/x86/include/asm/page_64_types.h | 2 +-
arch/x86/kernel/irq.c | 4 +-
crypto/pcrypt.c | 12 ++-
drivers/acpi/acpica/acglobal.h | 2 +
drivers/acpi/acpica/hwesleep.c | 8 +-
drivers/acpi/acpica/hwsleep.c | 11 +--
drivers/acpi/acpica/hwxfsleep.c | 7 ++
drivers/acpi/battery.c | 2 +-
drivers/acpi/pmic/intel_pmic.c | 51 +++++-----
drivers/android/binder.c | 20 ++--
drivers/ata/libata-core.c | 2 +-
drivers/ata/libata-eh.c | 8 ++
drivers/auxdisplay/ht16k33.c | 66 +++++++------
drivers/auxdisplay/img-ascii-lcd.c | 10 ++
drivers/char/hw_random/mtk-rng.c | 9 +-
drivers/char/tpm/tpm2-space.c | 3 +
drivers/cpuidle/sysfs.c | 5 +-
drivers/crypto/qat/qat_common/adf_pf2vf_msg.c | 13 +++
drivers/crypto/qat/qat_common/adf_vf_isr.c | 6 ++
drivers/dma/at_xdmac.c | 2 +-
drivers/dma/dmaengine.h | 2 +-
drivers/edac/sb_edac.c | 2 +-
drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c | 1 +
drivers/gpu/drm/drm_plane_helper.c | 1 -
drivers/gpu/drm/msm/msm_gem.c | 4 +-
drivers/gpu/drm/udl/udl_connector.c | 2 +-
drivers/hv/hyperv_vmbus.h | 1 +
drivers/hwmon/hwmon.c | 6 +-
drivers/hwmon/pmbus/lm25066.c | 23 +++++
drivers/i2c/busses/i2c-xlr.c | 6 +-
drivers/iio/dac/ad5446.c | 9 +-
drivers/infiniband/hw/mlx4/qp.c | 4 +-
drivers/infiniband/hw/qedr/verbs.c | 15 +--
drivers/infiniband/sw/rxe/rxe_param.h | 2 +-
drivers/input/mouse/elantech.c | 13 +++
drivers/input/serio/i8042-x86ia64io.h | 14 +++
drivers/irqchip/irq-bcm6345-l1.c | 2 +-
drivers/irqchip/irq-s3c24xx.c | 22 ++++-
drivers/media/i2c/mt9p031.c | 28 +++++-
drivers/media/pci/cx23885/cx23885-alsa.c | 3 +-
drivers/media/pci/netup_unidvb/netup_unidvb_core.c | 27 +++---
drivers/media/platform/mtk-vpu/mtk_vpu.c | 5 +-
drivers/media/platform/s5p-mfc/s5p_mfc.c | 6 +-
drivers/media/radio/si470x/radio-si470x-i2c.c | 2 +-
drivers/media/radio/si470x/radio-si470x-usb.c | 2 +-
drivers/media/rc/ite-cir.c | 2 +-
drivers/media/rc/mceusb.c | 1 +
drivers/media/usb/dvb-usb/az6027.c | 1 +
drivers/media/usb/dvb-usb/dibusb-common.c | 2 +-
drivers/media/usb/uvc/uvc_v4l2.c | 7 +-
drivers/memory/fsl_ifc.c | 13 ++-
drivers/memstick/core/ms_block.c | 2 +-
drivers/memstick/host/jmb38x_ms.c | 2 +-
drivers/memstick/host/r592.c | 8 +-
drivers/mmc/host/Kconfig | 2 +-
drivers/mmc/host/dw_mmc.c | 3 +-
drivers/mmc/host/mxs-mmc.c | 10 ++
drivers/mtd/spi-nor/hisi-sfc.c | 1 -
drivers/net/bonding/bond_sysfs_slave.c | 36 +++----
drivers/net/ethernet/amd/xgbe/xgbe-common.h | 8 ++
drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c | 20 +++-
.../net/ethernet/broadcom/bnx2x/bnx2x_init_ops.h | 4 +-
drivers/net/ethernet/cavium/thunder/nic_main.c | 2 +-
drivers/net/ethernet/cavium/thunder/nicvf_main.c | 4 +-
drivers/net/ethernet/ibm/ibmvnic.c | 3 +
drivers/net/ethernet/intel/i40e/i40e.h | 1 +
drivers/net/ethernet/intel/i40e/i40e_main.c | 5 +-
drivers/net/ethernet/intel/i40evf/i40evf_main.c | 2 +-
drivers/net/ethernet/sfc/ptp.c | 4 +-
drivers/net/ethernet/sfc/siena_sriov.c | 2 +-
drivers/net/ethernet/ti/davinci_emac.c | 16 +++-
drivers/net/phy/micrel.c | 5 +-
drivers/net/phy/phylink.c | 2 +-
drivers/net/tun.c | 5 +
drivers/net/vmxnet3/vmxnet3_drv.c | 1 -
drivers/net/wireless/ath/ath10k/mac.c | 6 +-
drivers/net/wireless/ath/ath10k/usb.c | 7 +-
drivers/net/wireless/ath/ath10k/wmi.h | 3 +
drivers/net/wireless/ath/ath6kl/usb.c | 7 +-
drivers/net/wireless/ath/ath9k/main.c | 4 +-
drivers/net/wireless/ath/dfs_pattern_detector.c | 10 +-
drivers/net/wireless/ath/wcn36xx/main.c | 4 +-
drivers/net/wireless/ath/wcn36xx/smd.c | 44 ++++++---
drivers/net/wireless/broadcom/b43/phy_g.c | 2 +-
drivers/net/wireless/broadcom/b43legacy/radio.c | 2 +-
drivers/net/wireless/intel/iwlwifi/mvm/utils.c | 3 +
drivers/net/wireless/marvell/libertas/if_usb.c | 2 +
drivers/net/wireless/marvell/libertas_tf/if_usb.c | 2 +
drivers/net/wireless/marvell/mwifiex/11n.c | 5 +-
drivers/net/wireless/marvell/mwifiex/cfg80211.c | 32 +++----
drivers/net/wireless/marvell/mwifiex/pcie.c | 8 ++
drivers/net/wireless/marvell/mwifiex/usb.c | 16 ++++
drivers/net/wireless/marvell/mwl8k.c | 2 +-
.../net/wireless/realtek/rtl818x/rtl8187/rtl8225.c | 14 +--
drivers/net/xen-netfront.c | 8 ++
drivers/nfc/pn533/pn533.c | 6 +-
drivers/pci/host/pci-aardvark.c | 23 +++--
drivers/pci/msi.c | 24 ++---
drivers/pci/quirks.c | 1 +
drivers/pinctrl/core.c | 2 +
drivers/platform/x86/hp_accel.c | 2 +
drivers/platform/x86/thinkpad_acpi.c | 2 +-
drivers/platform/x86/wmi.c | 9 +-
drivers/power/supply/bq27xxx_battery_i2c.c | 3 +-
drivers/power/supply/max17042_battery.c | 8 +-
drivers/power/supply/rt5033_battery.c | 2 +-
drivers/regulator/s5m8767.c | 21 ++---
drivers/s390/cio/css.c | 4 +-
drivers/scsi/advansys.c | 4 +-
drivers/scsi/csiostor/csio_lnode.c | 2 +-
drivers/scsi/dc395x.c | 1 +
drivers/scsi/lpfc/lpfc_sli.c | 1 +
drivers/scsi/qla2xxx/qla_gbl.h | 2 -
drivers/scsi/qla2xxx/qla_mr.c | 23 -----
drivers/scsi/qla2xxx/qla_os.c | 27 +-----
drivers/scsi/qla2xxx/qla_target.c | 14 +--
drivers/sh/maple/maple.c | 5 +-
drivers/soc/tegra/pmc.c | 2 +-
drivers/spi/spi-bcm-qspi.c | 5 +-
drivers/spi/spi-pl022.c | 5 +-
drivers/target/target_core_alua.c | 1 -
drivers/target/target_core_device.c | 2 +
drivers/target/target_core_internal.h | 1 +
drivers/target/target_core_transport.c | 76 ++++++++++-----
drivers/tty/serial/8250/8250_dw.c | 2 +-
drivers/tty/serial/serial_core.c | 16 +++-
drivers/tty/serial/xilinx_uartps.c | 3 +-
drivers/tty/tty_buffer.c | 3 +
drivers/usb/chipidea/core.c | 19 +++-
drivers/usb/gadget/legacy/hid.c | 4 +-
drivers/usb/host/max3421-hcd.c | 25 +----
drivers/usb/host/ohci-tmio.c | 2 +-
drivers/usb/host/xhci-hub.c | 3 +-
drivers/usb/misc/iowarrior.c | 8 +-
drivers/usb/musb/tusb6010.c | 5 +
drivers/usb/serial/keyspan.c | 15 ++-
drivers/video/console/sticon.c | 12 +--
drivers/video/fbdev/chipsfb.c | 2 +-
drivers/watchdog/Kconfig | 2 +-
drivers/watchdog/f71808e_wdt.c | 4 +-
drivers/watchdog/omap_wdt.c | 6 +-
drivers/xen/balloon.c | 86 ++++++++++++-----
drivers/xen/xen-pciback/conf_space_capability.c | 2 +-
fs/btrfs/async-thread.c | 14 +++
fs/btrfs/tree-log.c | 4 +-
fs/ext4/super.c | 9 +-
fs/fuse/dev.c | 14 ++-
fs/jfs/jfs_mount.c | 51 +++++-----
fs/nfs/flexfilelayout/flexfilelayoutdev.c | 4 +-
fs/nfs/pnfs_nfs.c | 4 +-
fs/nfs/write.c | 17 +---
fs/ocfs2/file.c | 8 +-
fs/orangefs/dcache.c | 4 +-
fs/quota/quota_tree.c | 15 +++
fs/tracefs/inode.c | 3 +-
include/asm-generic/tlb.h | 6 ++
include/linux/console.h | 2 +
include/linux/filter.h | 1 +
include/linux/libata.h | 2 +-
include/linux/lsm_hooks.h | 28 +++---
include/linux/rpmsg.h | 2 +-
include/linux/sched/task_stack.h | 4 +
include/linux/security.h | 28 +++---
include/linux/virtio_net.h | 7 +-
include/net/llc.h | 4 +-
include/rdma/rdma_netlink.h | 2 +-
include/target/target_core_base.h | 6 +-
include/uapi/linux/pci_regs.h | 6 ++
kernel/bpf/core.c | 4 +-
kernel/cgroup/cgroup.c | 31 ++++++-
kernel/events/core.c | 10 +-
kernel/locking/lockdep.c | 2 +-
kernel/power/swap.c | 7 +-
kernel/sched/core.c | 3 +
kernel/signal.c | 19 +---
kernel/trace/trace.c | 62 ++++++++++---
kernel/trace/tracing_map.c | 40 ++++----
lib/decompress_unxz.c | 2 +-
lib/xz/xz_dec_lzma2.c | 21 ++++-
lib/xz/xz_dec_stream.c | 6 +-
mm/hugetlb.c | 19 ++++
mm/oom_kill.c | 23 ++---
mm/slab.h | 2 +-
mm/zsmalloc.c | 7 +-
net/8021q/vlan.c | 3 -
net/8021q/vlan_dev.c | 3 +
net/batman-adv/bridge_loop_avoidance.c | 103 +++++++++++++++++----
net/batman-adv/fragmentation.c | 26 ++++--
net/batman-adv/hard-interface.c | 3 +
net/batman-adv/multicast.c | 31 +++++++
net/batman-adv/multicast.h | 15 +++
net/batman-adv/soft-interface.c | 5 +-
net/bluetooth/l2cap_sock.c | 10 +-
net/bluetooth/sco.c | 24 +++--
net/core/stream.c | 3 -
net/core/sysctl_net_core.c | 2 +-
net/ipv6/addrconf.c | 3 +
net/netfilter/nfnetlink_queue.c | 2 +-
net/nfc/core.c | 32 ++++---
net/nfc/nci/core.c | 11 ++-
net/vmw_vsock/af_vsock.c | 2 +
net/wireless/util.c | 1 +
samples/kprobes/kretprobe_example.c | 2 +-
scripts/leaking_addresses.pl | 3 +-
security/apparmor/label.c | 4 +-
security/integrity/evm/evm_main.c | 2 +-
security/security.c | 14 +--
security/selinux/hooks.c | 31 +++----
security/smack/smackfs.c | 11 ++-
sound/core/oss/mixer_oss.c | 43 +++++++--
sound/core/timer.c | 17 ++--
sound/isa/gus/gus_dma.c | 2 +
sound/pci/hda/hda_intel.c | 28 +++++-
sound/soc/codecs/cs42l42.c | 9 +-
sound/soc/soc-dapm.c | 29 ++++--
sound/synth/emux/emux.c | 2 +-
sound/usb/6fire/comm.c | 2 +-
sound/usb/6fire/firmware.c | 6 +-
sound/usb/line6/driver.c | 14 +--
sound/usb/line6/driver.h | 2 +-
sound/usb/line6/podhd.c | 6 +-
sound/usb/line6/toneport.c | 2 +-
sound/usb/misc/ua101.c | 4 +-
tools/perf/bench/sched-messaging.c | 4 +
275 files changed, 1724 insertions(+), 915 deletions(-)
From: Jan Kara <[email protected]>
commit 839b63860eb3835da165642923120d305925561d upstream.
Patch series "ocfs2: Truncate data corruption fix".
As further testing has shown, commit 5314454ea3f ("ocfs2: fix data
corruption after conversion from inline format") didn't fix all the data
corruption issues the customer started observing after 6dbf7bb55598
("fs: Don't invalidate page buffers in block_write_full_page()") This
time I have tracked them down to two bugs in ocfs2 truncation code.
One bug (truncating page cache before clearing tail cluster and setting
i_size) could cause data corruption even before 6dbf7bb55598, but before
that commit it needed a race with page fault, after 6dbf7bb55598 it
started to be pretty deterministic.
Another bug (zeroing pages beyond old i_size) used to be harmless
inefficiency before commit 6dbf7bb55598. But after commit 6dbf7bb55598
in combination with the first bug it resulted in deterministic data
corruption.
Although fixing only the first problem is needed to stop data
corruption, I've fixed both issues to make the code more robust.
This patch (of 2):
ocfs2_truncate_file() did unmap invalidate page cache pages before
zeroing partial tail cluster and setting i_size. Thus some pages could
be left (and likely have left if the cluster zeroing happened) in the
page cache beyond i_size after truncate finished letting user possibly
see stale data once the file was extended again. Also the tail cluster
zeroing was not guaranteed to finish before truncate finished causing
possible stale data exposure. The problem started to be particularly
easy to hit after commit 6dbf7bb55598 "fs: Don't invalidate page buffers
in block_write_full_page()" stopped invalidation of pages beyond i_size
from page writeback path.
Fix these problems by unmapping and invalidating pages in the page cache
after the i_size is reduced and tail cluster is zeroed out.
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Fixes: ccd979bdbce9 ("[PATCH] OCFS2: The Second Oracle Cluster Filesystem")
Signed-off-by: Jan Kara <[email protected]>
Reviewed-by: Joseph Qi <[email protected]>
Cc: Mark Fasheh <[email protected]>
Cc: Joel Becker <[email protected]>
Cc: Junxiao Bi <[email protected]>
Cc: Changwei Ge <[email protected]>
Cc: Gang He <[email protected]>
Cc: Jun Piao <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ocfs2/file.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
--- a/fs/ocfs2/file.c
+++ b/fs/ocfs2/file.c
@@ -490,10 +490,11 @@ int ocfs2_truncate_file(struct inode *in
* greater than page size, so we have to truncate them
* anyway.
*/
- unmap_mapping_range(inode->i_mapping, new_i_size + PAGE_SIZE - 1, 0, 1);
- truncate_inode_pages(inode->i_mapping, new_i_size);
if (OCFS2_I(inode)->ip_dyn_features & OCFS2_INLINE_DATA_FL) {
+ unmap_mapping_range(inode->i_mapping,
+ new_i_size + PAGE_SIZE - 1, 0, 1);
+ truncate_inode_pages(inode->i_mapping, new_i_size);
status = ocfs2_truncate_inline(inode, di_bh, new_i_size,
i_size_read(inode), 1);
if (status)
@@ -512,6 +513,9 @@ int ocfs2_truncate_file(struct inode *in
goto bail_unlock_sem;
}
+ unmap_mapping_range(inode->i_mapping, new_i_size + PAGE_SIZE - 1, 0, 1);
+ truncate_inode_pages(inode->i_mapping, new_i_size);
+
status = ocfs2_commit_truncate(osb, inode, di_bh);
if (status < 0) {
mlog_errno(status);
From: Zev Weiss <[email protected]>
commit ae59dc455a78fb73034dd1fbb337d7e59c27cbd8 upstream.
With the exception of the lm5066i, all the devices handled by this
driver had been missing their offset ('b') coefficients for direct
format readings.
Cc: [email protected]
Fixes: 58615a94f6a1 ("hwmon: (pmbus/lm25066) Add support for LM25056")
Fixes: e53e6497fc9f ("hwmon: (pmbus/lm25066) Refactor device specific coefficients")
Signed-off-by: Zev Weiss <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/hwmon/pmbus/lm25066.c | 23 +++++++++++++++++++++++
1 file changed, 23 insertions(+)
--- a/drivers/hwmon/pmbus/lm25066.c
+++ b/drivers/hwmon/pmbus/lm25066.c
@@ -69,22 +69,27 @@ static struct __coeff lm25066_coeff[6][P
[lm25056] = {
[PSC_VOLTAGE_IN] = {
.m = 16296,
+ .b = 1343,
.R = -2,
},
[PSC_CURRENT_IN] = {
.m = 13797,
+ .b = -1833,
.R = -2,
},
[PSC_CURRENT_IN_L] = {
.m = 6726,
+ .b = -537,
.R = -2,
},
[PSC_POWER] = {
.m = 5501,
+ .b = -2908,
.R = -3,
},
[PSC_POWER_L] = {
.m = 26882,
+ .b = -5646,
.R = -4,
},
[PSC_TEMPERATURE] = {
@@ -96,26 +101,32 @@ static struct __coeff lm25066_coeff[6][P
[lm25066] = {
[PSC_VOLTAGE_IN] = {
.m = 22070,
+ .b = -1800,
.R = -2,
},
[PSC_VOLTAGE_OUT] = {
.m = 22070,
+ .b = -1800,
.R = -2,
},
[PSC_CURRENT_IN] = {
.m = 13661,
+ .b = -5200,
.R = -2,
},
[PSC_CURRENT_IN_L] = {
.m = 6852,
+ .b = -3100,
.R = -2,
},
[PSC_POWER] = {
.m = 736,
+ .b = -3300,
.R = -2,
},
[PSC_POWER_L] = {
.m = 369,
+ .b = -1900,
.R = -2,
},
[PSC_TEMPERATURE] = {
@@ -155,26 +166,32 @@ static struct __coeff lm25066_coeff[6][P
[lm5064] = {
[PSC_VOLTAGE_IN] = {
.m = 4611,
+ .b = -642,
.R = -2,
},
[PSC_VOLTAGE_OUT] = {
.m = 4621,
+ .b = 423,
.R = -2,
},
[PSC_CURRENT_IN] = {
.m = 10742,
+ .b = 1552,
.R = -2,
},
[PSC_CURRENT_IN_L] = {
.m = 5456,
+ .b = 2118,
.R = -2,
},
[PSC_POWER] = {
.m = 1204,
+ .b = 8524,
.R = -3,
},
[PSC_POWER_L] = {
.m = 612,
+ .b = 11202,
.R = -3,
},
[PSC_TEMPERATURE] = {
@@ -184,26 +201,32 @@ static struct __coeff lm25066_coeff[6][P
[lm5066] = {
[PSC_VOLTAGE_IN] = {
.m = 4587,
+ .b = -1200,
.R = -2,
},
[PSC_VOLTAGE_OUT] = {
.m = 4587,
+ .b = -2400,
.R = -2,
},
[PSC_CURRENT_IN] = {
.m = 10753,
+ .b = -1200,
.R = -2,
},
[PSC_CURRENT_IN_L] = {
.m = 5405,
+ .b = -600,
.R = -2,
},
[PSC_POWER] = {
.m = 1204,
+ .b = -6000,
.R = -3,
},
[PSC_POWER_L] = {
.m = 605,
+ .b = -8000,
.R = -3,
},
[PSC_TEMPERATURE] = {
From: Sean Young <[email protected]>
commit fdc881783099c6343921ff017450831c8766d12a upstream.
On an Intel NUC6iSYK, no IR is reported after a receive overflow.
When a receiver overflow occurs, this condition is only cleared by
reading the fifo. Make sure we read anything in the fifo.
Fixes: 28c7afb07ccf ("media: ite-cir: check for receive overflow")
Suggested-by: Bryan Pass <[email protected]>
Tested-by: Bryan Pass <[email protected]>
Cc: [email protected]>
Signed-off-by: Sean Young <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/rc/ite-cir.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/media/rc/ite-cir.c
+++ b/drivers/media/rc/ite-cir.c
@@ -292,7 +292,7 @@ static irqreturn_t ite_cir_isr(int irq,
}
/* check for the receive interrupt */
- if (iflags & ITE_IRQ_RX_FIFO) {
+ if (iflags & (ITE_IRQ_RX_FIFO | ITE_IRQ_RX_FIFO_OVERRUN)) {
/* read the FIFO bytes */
rx_bytes =
dev->params.get_rx_bytes(dev, rx_buf,
From: Mathias Nyman <[email protected]>
commit e1959faf085b004e6c3afaaaa743381f00e7c015 upstream.
Some USB 3.1 enumeration issues were reported after the hub driver removed
the minimum 100ms limit for the power-on-good delay.
Since commit 90d28fb53d4a ("usb: core: reduce power-on-good delay time of
root hub") the hub driver sets the power-on-delay based on the
bPwrOn2PwrGood value in the hub descriptor.
xhci driver has a 20ms bPwrOn2PwrGood value for both roothubs based
on xhci spec section 5.4.8, but it's clearly not enough for the
USB 3.1 devices, causing enumeration issues.
Tests indicate full 100ms delay is needed.
Reported-by: Walt Jr. Brake <[email protected]>
Signed-off-by: Mathias Nyman <[email protected]>
Fixes: 90d28fb53d4a ("usb: core: reduce power-on-good delay time of root hub")
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/host/xhci-hub.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -174,7 +174,6 @@ static void xhci_common_hub_descriptor(s
{
u16 temp;
- desc->bPwrOn2PwrGood = 10; /* xhci section 5.4.9 says 20ms max */
desc->bHubContrCurrent = 0;
desc->bNbrPorts = ports;
@@ -208,6 +207,7 @@ static void xhci_usb2_hub_descriptor(str
desc->bDescriptorType = USB_DT_HUB;
temp = 1 + (ports / 8);
desc->bDescLength = USB_DT_HUB_NONVAR_SIZE + 2 * temp;
+ desc->bPwrOn2PwrGood = 10; /* xhci section 5.4.8 says 20ms */
/* The Device Removable bits are reported on a byte granularity.
* If the port doesn't exist within that byte, the bit is set to 0.
@@ -258,6 +258,7 @@ static void xhci_usb3_hub_descriptor(str
xhci_common_hub_descriptor(xhci, desc, ports);
desc->bDescriptorType = USB_DT_SS_HUB;
desc->bDescLength = USB_DT_SS_HUB_SIZE;
+ desc->bPwrOn2PwrGood = 50; /* usb 3.1 may fail if less than 100ms */
/* header decode latency should be zero for roothubs,
* see section 4.23.5.2.
From: Dan Carpenter <[email protected]>
commit a0bcce2b2a169e10eb265c8f0ebdd5ae4c875670 upstream.
The "4 * be32_to_cpu(data->count)" multiplication can potentially
overflow which would lead to memory corruption. Add a check for that.
Cc: [email protected]
Fixes: 745b361e989a ("tpm: infrastructure for TPM spaces")
Signed-off-by: Dan Carpenter <[email protected]>
Reviewed-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/char/tpm/tpm2-space.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/char/tpm/tpm2-space.c
+++ b/drivers/char/tpm/tpm2-space.c
@@ -422,6 +422,9 @@ static int tpm2_map_response_body(struct
if (be32_to_cpu(data->capability) != TPM2_CAP_HANDLES)
return 0;
+ if (be32_to_cpu(data->count) > (UINT_MAX - TPM_HEADER_SIZE - 9) / 4)
+ return -EFAULT;
+
if (len != TPM_HEADER_SIZE + 9 + 4 * be32_to_cpu(data->count))
return -EFAULT;
From: Dmitry Bogdanov <[email protected]>
[ Upstream commit 4a8f71014b4d56c4fb287607e844c0a9f68f46d9 ]
The sgl is freed in the target stack in target_release_cmd_kref() before
calling qlt_free_cmd() but there is an unmap of sgl in qlt_free_cmd() that
causes a panic if sgl is not yet DMA unmapped:
NIP dma_direct_unmap_sg+0xdc/0x180
LR dma_direct_unmap_sg+0xc8/0x180
Call Trace:
ql_dbg_prefix+0x68/0xc0 [qla2xxx] (unreliable)
dma_unmap_sg_attrs+0x54/0xf0
qlt_unmap_sg.part.19+0x54/0x1c0 [qla2xxx]
qlt_free_cmd+0x124/0x1d0 [qla2xxx]
tcm_qla2xxx_release_cmd+0x4c/0xa0 [tcm_qla2xxx]
target_put_sess_cmd+0x198/0x370 [target_core_mod]
transport_generic_free_cmd+0x6c/0x1b0 [target_core_mod]
tcm_qla2xxx_complete_free+0x6c/0x90 [tcm_qla2xxx]
The sgl may be left unmapped in error cases of response sending. For
instance, qlt_rdy_to_xfer() maps sgl and exits when session is being
deleted keeping the sgl mapped.
This patch removes use-after-free of the sgl and ensures that the sgl is
unmapped for any command that was not sent to firmware.
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Himanshu Madhani <[email protected]>
Signed-off-by: Dmitry Bogdanov <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/qla2xxx/qla_target.c | 14 +++++---------
1 file changed, 5 insertions(+), 9 deletions(-)
diff --git a/drivers/scsi/qla2xxx/qla_target.c b/drivers/scsi/qla2xxx/qla_target.c
index bd8f9b03386ad..cb2db1c1e9f2a 100644
--- a/drivers/scsi/qla2xxx/qla_target.c
+++ b/drivers/scsi/qla2xxx/qla_target.c
@@ -3095,8 +3095,7 @@ int qlt_xmit_response(struct qla_tgt_cmd *cmd, int xmit_type,
"RESET-RSP online/active/old-count/new-count = %d/%d/%d/%d.\n",
vha->flags.online, qla2x00_reset_active(vha),
cmd->reset_count, qpair->chip_reset);
- spin_unlock_irqrestore(qpair->qp_lock_ptr, flags);
- return 0;
+ goto out_unmap_unlock;
}
/* Does F/W have an IOCBs for this request */
@@ -3218,10 +3217,6 @@ int qlt_rdy_to_xfer(struct qla_tgt_cmd *cmd)
prm.sg = NULL;
prm.req_cnt = 1;
- /* Calculate number of entries and segments required */
- if (qlt_pci_map_calc_cnt(&prm) != 0)
- return -EAGAIN;
-
if (!qpair->fw_started || (cmd->reset_count != qpair->chip_reset) ||
(cmd->sess && cmd->sess->deleted)) {
/*
@@ -3237,6 +3232,10 @@ int qlt_rdy_to_xfer(struct qla_tgt_cmd *cmd)
return 0;
}
+ /* Calculate number of entries and segments required */
+ if (qlt_pci_map_calc_cnt(&prm) != 0)
+ return -EAGAIN;
+
spin_lock_irqsave(qpair->qp_lock_ptr, flags);
/* Does F/W have an IOCBs for this request */
res = qlt_check_reserve_free_req(qpair, prm.req_cnt);
@@ -3671,9 +3670,6 @@ void qlt_free_cmd(struct qla_tgt_cmd *cmd)
BUG_ON(cmd->cmd_in_wq);
- if (cmd->sg_mapped)
- qlt_unmap_sg(cmd->vha, cmd);
-
if (!cmd->q_full)
qlt_decr_num_pend_cmds(cmd->vha);
--
2.33.0
From: Zheyu Ma <[email protected]>
[ Upstream commit c69b2f46876825c726bd8a97c7fa852d8932bc32 ]
During the process of driver probing, the probe function should return < 0
for failure, otherwise, the kernel will treat value > 0 as success.
Signed-off-by: Zheyu Ma <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/cavium/thunder/nicvf_main.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/cavium/thunder/nicvf_main.c b/drivers/net/ethernet/cavium/thunder/nicvf_main.c
index 98734a37b6f64..df1c4ba7e0c97 100644
--- a/drivers/net/ethernet/cavium/thunder/nicvf_main.c
+++ b/drivers/net/ethernet/cavium/thunder/nicvf_main.c
@@ -1152,7 +1152,7 @@ static int nicvf_register_misc_interrupt(struct nicvf *nic)
if (ret < 0) {
netdev_err(nic->netdev,
"Req for #%d msix vectors failed\n", nic->num_vec);
- return 1;
+ return ret;
}
sprintf(nic->irq_name[irq], "%s Mbox", "NICVF");
@@ -1171,7 +1171,7 @@ static int nicvf_register_misc_interrupt(struct nicvf *nic)
if (!nicvf_check_pf_ready(nic)) {
nicvf_disable_intr(nic, NICVF_INTR_MBOX, 0);
nicvf_unregister_interrupts(nic);
- return 1;
+ return -EIO;
}
return 0;
--
2.33.0
From: Arnd Bergmann <[email protected]>
[ Upstream commit 8017c99680fa65e1e8d999df1583de476a187830 ]
On arm64 randconfig builds, hyperv sometimes fails with this
error:
In file included from drivers/hv/hv_trace.c:3:
In file included from drivers/hv/hyperv_vmbus.h:16:
In file included from arch/arm64/include/asm/sync_bitops.h:5:
arch/arm64/include/asm/bitops.h:11:2: error: only <linux/bitops.h> can be included directly
In file included from include/asm-generic/bitops/hweight.h:5:
include/asm-generic/bitops/arch_hweight.h:9:9: error: implicit declaration of function '__sw_hweight32' [-Werror,-Wimplicit-function-declaration]
include/asm-generic/bitops/atomic.h:17:7: error: implicit declaration of function 'BIT_WORD' [-Werror,-Wimplicit-function-declaration]
Include the correct header first.
Signed-off-by: Arnd Bergmann <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Wei Liu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hv/hyperv_vmbus.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/hv/hyperv_vmbus.h b/drivers/hv/hyperv_vmbus.h
index a166de6efd99c..0996a246c80bb 100644
--- a/drivers/hv/hyperv_vmbus.h
+++ b/drivers/hv/hyperv_vmbus.h
@@ -26,6 +26,7 @@
#define _HYPERV_VMBUS_H
#include <linux/list.h>
+#include <linux/bitops.h>
#include <asm/sync_bitops.h>
#include <linux/atomic.h>
#include <linux/hyperv.h>
--
2.33.0
From: Dongli Zhang <[email protected]>
[ Upstream commit 042b2046d0f05cf8124c26ff65dbb6148a4404fb ]
The tx queues are not stopped during the live migration. As a result, the
ndo_start_xmit() may access netfront_info->queues which is freed by
talk_to_netback()->xennet_destroy_queues().
This patch is to netif_device_detach() at the beginning of xen-netfront
resuming, and netif_device_attach() at the end of resuming.
CPU A CPU B
talk_to_netback()
-> if (info->queues)
xennet_destroy_queues(info);
to free netfront_info->queues
xennet_start_xmit()
to access netfront_info->queues
-> err = xennet_create_queues(info, &num_queues);
The idea is borrowed from virtio-net.
Cc: Joe Jin <[email protected]>
Signed-off-by: Dongli Zhang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/xen-netfront.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c
index 1131397454bd4..89e6a50b53da5 100644
--- a/drivers/net/xen-netfront.c
+++ b/drivers/net/xen-netfront.c
@@ -1441,6 +1441,10 @@ static int netfront_resume(struct xenbus_device *dev)
dev_dbg(&dev->dev, "%s\n", dev->nodename);
+ netif_tx_lock_bh(info->netdev);
+ netif_device_detach(info->netdev);
+ netif_tx_unlock_bh(info->netdev);
+
xennet_disconnect_backend(info);
return 0;
}
@@ -1990,6 +1994,10 @@ static int xennet_connect(struct net_device *dev)
* domain a kick because we've probably just requeued some
* packets.
*/
+ netif_tx_lock_bh(np->netdev);
+ netif_device_attach(np->netdev);
+ netif_tx_unlock_bh(np->netdev);
+
netif_carrier_on(np->netdev);
for (j = 0; j < num_queues; ++j) {
queue = &np->queues[j];
--
2.33.0
From: Erik Ekman <[email protected]>
[ Upstream commit bf6abf345dfa77786aca554bc58c64bd428ecb1d ]
Use pci_info instead to avoid unnamed/uninitialized noise:
[197088.688729] sfc 0000:01:00.0: Solarflare NIC detected
[197088.690333] sfc 0000:01:00.0: Part Number : SFN5122F
[197088.729061] sfc 0000:01:00.0 (unnamed net_device) (uninitialized): no SR-IOV VFs probed
[197088.729071] sfc 0000:01:00.0 (unnamed net_device) (uninitialized): no PTP support
Inspired by fa44821a4ddd ("sfc: don't use netif_info et al before
net_device is registered") from Heiner Kallweit.
Signed-off-by: Erik Ekman <[email protected]>
Acked-by: Martin Habets <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/sfc/ptp.c | 4 ++--
drivers/net/ethernet/sfc/siena_sriov.c | 2 +-
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/sfc/ptp.c b/drivers/net/ethernet/sfc/ptp.c
index f226907926977..c50c1892e88da 100644
--- a/drivers/net/ethernet/sfc/ptp.c
+++ b/drivers/net/ethernet/sfc/ptp.c
@@ -494,7 +494,7 @@ static int efx_ptp_get_attributes(struct efx_nic *efx)
} else if (rc == -EINVAL) {
fmt = MC_CMD_PTP_OUT_GET_ATTRIBUTES_SECONDS_NANOSECONDS;
} else if (rc == -EPERM) {
- netif_info(efx, probe, efx->net_dev, "no PTP support\n");
+ pci_info(efx->pci_dev, "no PTP support\n");
return rc;
} else {
efx_mcdi_display_error(efx, MC_CMD_PTP, sizeof(inbuf),
@@ -613,7 +613,7 @@ static int efx_ptp_disable(struct efx_nic *efx)
* should only have been called during probe.
*/
if (rc == -ENOSYS || rc == -EPERM)
- netif_info(efx, probe, efx->net_dev, "no PTP support\n");
+ pci_info(efx->pci_dev, "no PTP support\n");
else if (rc)
efx_mcdi_display_error(efx, MC_CMD_PTP,
MC_CMD_PTP_IN_DISABLE_LEN,
diff --git a/drivers/net/ethernet/sfc/siena_sriov.c b/drivers/net/ethernet/sfc/siena_sriov.c
index da7b94f346049..30d58f72725df 100644
--- a/drivers/net/ethernet/sfc/siena_sriov.c
+++ b/drivers/net/ethernet/sfc/siena_sriov.c
@@ -1059,7 +1059,7 @@ void efx_siena_sriov_probe(struct efx_nic *efx)
return;
if (efx_siena_sriov_cmd(efx, false, &efx->vi_scale, &count)) {
- netif_info(efx, probe, efx->net_dev, "no SR-IOV VFs probed\n");
+ pci_info(efx->pci_dev, "no SR-IOV VFs probed\n");
return;
}
if (count > 0 && count > max_vfs)
--
2.33.0
From: Walter Stoll <[email protected]>
[ Upstream commit cd004d8299f1dc6cfa6a4eea8f94cb45eaedf070 ]
TI's implementation does not service the watchdog even if the kernel
command line parameter omap_wdt.early_enable is set to 1. This patch
fixes the issue.
Signed-off-by: Walter Stoll <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Wim Van Sebroeck <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/watchdog/omap_wdt.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/watchdog/omap_wdt.c b/drivers/watchdog/omap_wdt.c
index 1b02bfa81b296..40c006ee8492d 100644
--- a/drivers/watchdog/omap_wdt.c
+++ b/drivers/watchdog/omap_wdt.c
@@ -271,8 +271,12 @@ static int omap_wdt_probe(struct platform_device *pdev)
wdev->wdog.bootstatus = WDIOF_CARDRESET;
}
- if (!early_enable)
+ if (early_enable) {
+ omap_wdt_start(&wdev->wdog);
+ set_bit(WDOG_HW_RUNNING, &wdev->wdog.status);
+ } else {
omap_wdt_disable(wdev);
+ }
ret = watchdog_register_device(&wdev->wdog);
if (ret) {
--
2.33.0
From: Austin Kim <[email protected]>
commit d159037abbe3412285c271bdfb9cdf19e62678ff upstream.
If kcalloc() return NULL due to memory starvation, it is possible for
kstrdup() to return NULL in similar case. So add null check after the call
to kstrdup() is made.
[ minor coding-style fix by tiwai ]
Signed-off-by: Austin Kim <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/20211109003742.GA5423@raspberrypi
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/synth/emux/emux.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/sound/synth/emux/emux.c
+++ b/sound/synth/emux/emux.c
@@ -101,7 +101,7 @@ int snd_emux_register(struct snd_emux *e
emu->name = kstrdup(name, GFP_KERNEL);
emu->voices = kcalloc(emu->max_voices, sizeof(struct snd_emux_voice),
GFP_KERNEL);
- if (emu->voices == NULL)
+ if (emu->name == NULL || emu->voices == NULL)
return -ENOMEM;
/* create soundfont list */
From: Todd Kjos <[email protected]>
commit 52f88693378a58094c538662ba652aff0253c4fe upstream.
Since binder was integrated with selinux, it has passed
'struct task_struct' associated with the binder_proc
to represent the source and target of transactions.
The conversion of task to SID was then done in the hook
implementations. It turns out that there are race conditions
which can result in an incorrect security context being used.
Fix by using the 'struct cred' saved during binder_open and pass
it to the selinux subsystem.
Cc: [email protected] # 5.14 (need backport for earlier stables)
Fixes: 79af73079d75 ("Add security hooks to binder and implement the hooks for SELinux.")
Suggested-by: Jann Horn <[email protected]>
Signed-off-by: Todd Kjos <[email protected]>
Acked-by: Casey Schaufler <[email protected]>
Signed-off-by: Paul Moore <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/android/binder.c | 12 ++++++------
include/linux/lsm_hooks.h | 28 ++++++++++++++--------------
include/linux/security.h | 28 ++++++++++++++--------------
security/security.c | 14 +++++++-------
security/selinux/hooks.c | 31 +++++++++++++------------------
5 files changed, 54 insertions(+), 59 deletions(-)
--- a/drivers/android/binder.c
+++ b/drivers/android/binder.c
@@ -2285,7 +2285,7 @@ static int binder_translate_binder(struc
ret = -EINVAL;
goto done;
}
- if (security_binder_transfer_binder(proc->tsk, target_proc->tsk)) {
+ if (security_binder_transfer_binder(proc->cred, target_proc->cred)) {
ret = -EPERM;
goto done;
}
@@ -2331,7 +2331,7 @@ static int binder_translate_handle(struc
proc->pid, thread->pid, fp->handle);
return -EINVAL;
}
- if (security_binder_transfer_binder(proc->tsk, target_proc->tsk)) {
+ if (security_binder_transfer_binder(proc->cred, target_proc->cred)) {
ret = -EPERM;
goto done;
}
@@ -2415,7 +2415,7 @@ static int binder_translate_fd(int fd,
ret = -EBADF;
goto err_fget;
}
- ret = security_binder_transfer_file(proc->tsk, target_proc->tsk, file);
+ ret = security_binder_transfer_file(proc->cred, target_proc->cred, file);
if (ret < 0) {
ret = -EPERM;
goto err_security;
@@ -2802,8 +2802,8 @@ static void binder_transaction(struct bi
return_error_line = __LINE__;
goto err_invalid_target_handle;
}
- if (security_binder_transaction(proc->tsk,
- target_proc->tsk) < 0) {
+ if (security_binder_transaction(proc->cred,
+ target_proc->cred) < 0) {
return_error = BR_FAILED_REPLY;
return_error_param = -EPERM;
return_error_line = __LINE__;
@@ -4469,7 +4469,7 @@ static int binder_ioctl_set_ctx_mgr(stru
ret = -EBUSY;
goto out;
}
- ret = security_binder_set_context_mgr(proc->tsk);
+ ret = security_binder_set_context_mgr(proc->cred);
if (ret < 0)
goto out;
if (uid_valid(context->binder_context_mgr_uid)) {
--- a/include/linux/lsm_hooks.h
+++ b/include/linux/lsm_hooks.h
@@ -1170,22 +1170,22 @@
*
* @binder_set_context_mgr:
* Check whether @mgr is allowed to be the binder context manager.
- * @mgr contains the task_struct for the task being registered.
+ * @mgr contains the struct cred for the current binder process.
* Return 0 if permission is granted.
* @binder_transaction:
* Check whether @from is allowed to invoke a binder transaction call
* to @to.
- * @from contains the task_struct for the sending task.
- * @to contains the task_struct for the receiving task.
+ * @from contains the struct cred for the sending process.
+ * @to contains the struct cred for the receiving process.
* @binder_transfer_binder:
* Check whether @from is allowed to transfer a binder reference to @to.
- * @from contains the task_struct for the sending task.
- * @to contains the task_struct for the receiving task.
+ * @from contains the struct cred for the sending process.
+ * @to contains the struct cred for the receiving process.
* @binder_transfer_file:
* Check whether @from is allowed to transfer @file to @to.
- * @from contains the task_struct for the sending task.
+ * @from contains the struct cred for the sending process.
* @file contains the struct file being transferred.
- * @to contains the task_struct for the receiving task.
+ * @to contains the struct cred for the receiving process.
*
* @ptrace_access_check:
* Check permission before allowing the current process to trace the
@@ -1353,13 +1353,13 @@
* @ctxlen points to the place to put the length of @ctx.
*/
union security_list_options {
- int (*binder_set_context_mgr)(struct task_struct *mgr);
- int (*binder_transaction)(struct task_struct *from,
- struct task_struct *to);
- int (*binder_transfer_binder)(struct task_struct *from,
- struct task_struct *to);
- int (*binder_transfer_file)(struct task_struct *from,
- struct task_struct *to,
+ int (*binder_set_context_mgr)(const struct cred *mgr);
+ int (*binder_transaction)(const struct cred *from,
+ const struct cred *to);
+ int (*binder_transfer_binder)(const struct cred *from,
+ const struct cred *to);
+ int (*binder_transfer_file)(const struct cred *from,
+ const struct cred *to,
struct file *file);
int (*ptrace_access_check)(struct task_struct *child,
--- a/include/linux/security.h
+++ b/include/linux/security.h
@@ -197,13 +197,13 @@ static inline void security_free_mnt_opt
extern int security_init(void);
/* Security operations */
-int security_binder_set_context_mgr(struct task_struct *mgr);
-int security_binder_transaction(struct task_struct *from,
- struct task_struct *to);
-int security_binder_transfer_binder(struct task_struct *from,
- struct task_struct *to);
-int security_binder_transfer_file(struct task_struct *from,
- struct task_struct *to, struct file *file);
+int security_binder_set_context_mgr(const struct cred *mgr);
+int security_binder_transaction(const struct cred *from,
+ const struct cred *to);
+int security_binder_transfer_binder(const struct cred *from,
+ const struct cred *to);
+int security_binder_transfer_file(const struct cred *from,
+ const struct cred *to, struct file *file);
int security_ptrace_access_check(struct task_struct *child, unsigned int mode);
int security_ptrace_traceme(struct task_struct *parent);
int security_capget(struct task_struct *target,
@@ -424,25 +424,25 @@ static inline int security_init(void)
return 0;
}
-static inline int security_binder_set_context_mgr(struct task_struct *mgr)
+static inline int security_binder_set_context_mgr(const struct cred *mgr)
{
return 0;
}
-static inline int security_binder_transaction(struct task_struct *from,
- struct task_struct *to)
+static inline int security_binder_transaction(const struct cred *from,
+ const struct cred *to)
{
return 0;
}
-static inline int security_binder_transfer_binder(struct task_struct *from,
- struct task_struct *to)
+static inline int security_binder_transfer_binder(const struct cred *from,
+ const struct cred *to)
{
return 0;
}
-static inline int security_binder_transfer_file(struct task_struct *from,
- struct task_struct *to,
+static inline int security_binder_transfer_file(const struct cred *from,
+ const struct cred *to,
struct file *file)
{
return 0;
--- a/security/security.c
+++ b/security/security.c
@@ -222,25 +222,25 @@ EXPORT_SYMBOL(unregister_lsm_notifier);
/* Security operations */
-int security_binder_set_context_mgr(struct task_struct *mgr)
+int security_binder_set_context_mgr(const struct cred *mgr)
{
return call_int_hook(binder_set_context_mgr, 0, mgr);
}
-int security_binder_transaction(struct task_struct *from,
- struct task_struct *to)
+int security_binder_transaction(const struct cred *from,
+ const struct cred *to)
{
return call_int_hook(binder_transaction, 0, from, to);
}
-int security_binder_transfer_binder(struct task_struct *from,
- struct task_struct *to)
+int security_binder_transfer_binder(const struct cred *from,
+ const struct cred *to)
{
return call_int_hook(binder_transfer_binder, 0, from, to);
}
-int security_binder_transfer_file(struct task_struct *from,
- struct task_struct *to, struct file *file)
+int security_binder_transfer_file(const struct cred *from,
+ const struct cred *to, struct file *file)
{
return call_int_hook(binder_transfer_file, 0, from, to, file);
}
--- a/security/selinux/hooks.c
+++ b/security/selinux/hooks.c
@@ -2136,21 +2136,18 @@ static inline u32 open_file_to_av(struct
/* Hook functions begin here. */
-static int selinux_binder_set_context_mgr(struct task_struct *mgr)
+static int selinux_binder_set_context_mgr(const struct cred *mgr)
{
- u32 mysid = current_sid();
- u32 mgrsid = task_sid(mgr);
-
- return avc_has_perm(mysid, mgrsid, SECCLASS_BINDER,
+ return avc_has_perm(current_sid(), cred_sid(mgr), SECCLASS_BINDER,
BINDER__SET_CONTEXT_MGR, NULL);
}
-static int selinux_binder_transaction(struct task_struct *from,
- struct task_struct *to)
+static int selinux_binder_transaction(const struct cred *from,
+ const struct cred *to)
{
u32 mysid = current_sid();
- u32 fromsid = task_sid(from);
- u32 tosid = task_sid(to);
+ u32 fromsid = cred_sid(from);
+ u32 tosid = cred_sid(to);
int rc;
if (mysid != fromsid) {
@@ -2164,21 +2161,19 @@ static int selinux_binder_transaction(st
NULL);
}
-static int selinux_binder_transfer_binder(struct task_struct *from,
- struct task_struct *to)
+static int selinux_binder_transfer_binder(const struct cred *from,
+ const struct cred *to)
{
- u32 fromsid = task_sid(from);
- u32 tosid = task_sid(to);
-
- return avc_has_perm(fromsid, tosid, SECCLASS_BINDER, BINDER__TRANSFER,
+ return avc_has_perm(cred_sid(from), cred_sid(to),
+ SECCLASS_BINDER, BINDER__TRANSFER,
NULL);
}
-static int selinux_binder_transfer_file(struct task_struct *from,
- struct task_struct *to,
+static int selinux_binder_transfer_file(const struct cred *from,
+ const struct cred *to,
struct file *file)
{
- u32 sid = task_sid(to);
+ u32 sid = cred_sid(to);
struct file_security_struct *fsec = file->f_security;
struct dentry *dentry = file->f_path.dentry;
struct inode_security_struct *isec;
From: Dongli Zhang <[email protected]>
[ Upstream commit 9159f102402a64ac85e676b75cc1f9c62c5b4b73 ]
The netif_device_detach() conditionally stops all tx queues if the queues
are running. There is no need to call netif_tx_stop_all_queues() again.
Signed-off-by: Dongli Zhang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/vmxnet3/vmxnet3_drv.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c
index 3628fd7e606fd..98fc34ea78ffe 100644
--- a/drivers/net/vmxnet3/vmxnet3_drv.c
+++ b/drivers/net/vmxnet3/vmxnet3_drv.c
@@ -3623,7 +3623,6 @@ vmxnet3_suspend(struct device *device)
vmxnet3_free_intr_resources(adapter);
netif_device_detach(netdev);
- netif_tx_stop_all_queues(netdev);
/* Create wake-up filters. */
pmConf = adapter->pm_conf;
--
2.33.0
From: Takashi Iwai <[email protected]>
commit 16e28abb7290c4ca3b3a0f333ba067f34bb18c86 upstream.
Fujitsu Lifebook T725 laptop requires, like a few other similar
models, the nomux and notimeout options to probe the touchpad
properly. This patch adds the corresponding quirk entries.
BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1191980
Tested-by: Neal Gompa <[email protected]>
Cc: <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/input/serio/i8042-x86ia64io.h | 14 ++++++++++++++
1 file changed, 14 insertions(+)
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -277,6 +277,13 @@ static const struct dmi_system_id __init
},
},
{
+ /* Fujitsu Lifebook T725 laptop */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK T725"),
+ },
+ },
+ {
/* Fujitsu Lifebook U745 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
@@ -845,6 +852,13 @@ static const struct dmi_system_id __init
},
},
{
+ /* Fujitsu Lifebook T725 laptop */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK T725"),
+ },
+ },
+ {
/* Fujitsu U574 laptop */
/* https://bugzilla.kernel.org/show_bug.cgi?id=69731 */
.matches = {
From: Damien Le Moal <[email protected]>
commit 68dbbe7d5b4fde736d104cbbc9a2fce875562012 upstream.
Some ATA drives are very slow to respond to READ_LOG_EXT and
READ_LOG_DMA_EXT commands issued from ata_dev_configure() when the
device is revalidated right after resuming a system or inserting the
ATA adapter driver (e.g. ahci). The default 5s timeout
(ATA_EH_CMD_DFL_TIMEOUT) used for these commands is too short, causing
errors during the device configuration. Ex:
...
ata9: SATA max UDMA/133 abar m524288@0x9d200000 port 0x9d200400 irq 209
ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata9.00: ATA-9: XXX XXXXXXXXXXXXXXX, XXXXXXXX, max UDMA/133
ata9.00: qc timeout (cmd 0x2f)
ata9.00: Read log page 0x00 failed, Emask 0x4
ata9.00: Read log page 0x00 failed, Emask 0x40
ata9.00: NCQ Send/Recv Log not supported
ata9.00: Read log page 0x08 failed, Emask 0x40
ata9.00: 27344764928 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata9.00: Read log page 0x00 failed, Emask 0x40
ata9.00: ATA Identify Device Log not supported
ata9.00: failed to set xfermode (err_mask=0x40)
ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata9.00: configured for UDMA/133
...
The timeout error causes a soft reset of the drive link, followed in
most cases by a successful revalidation as that give enough time to the
drive to become fully ready to quickly process the read log commands.
However, in some cases, this also fails resulting in the device being
dropped.
Fix this by using adding the ata_eh_revalidate_timeouts entries for the
READ_LOG_EXT and READ_LOG_DMA_EXT commands. This defines a timeout
increased to 15s, retriable one time.
Reported-by: Geert Uytterhoeven <[email protected]>
Tested-by: Geert Uytterhoeven <[email protected]>
Cc: [email protected]
Signed-off-by: Damien Le Moal <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/ata/libata-eh.c | 8 ++++++++
include/linux/libata.h | 2 +-
2 files changed, 9 insertions(+), 1 deletion(-)
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -114,6 +114,12 @@ static const unsigned long ata_eh_identi
ULONG_MAX,
};
+static const unsigned long ata_eh_revalidate_timeouts[] = {
+ 15000, /* Some drives are slow to read log pages when waking-up */
+ 15000, /* combined time till here is enough even for media access */
+ ULONG_MAX,
+};
+
static const unsigned long ata_eh_flush_timeouts[] = {
15000, /* be generous with flush */
15000, /* ditto */
@@ -150,6 +156,8 @@ static const struct ata_eh_cmd_timeout_e
ata_eh_cmd_timeout_table[ATA_EH_CMD_TIMEOUT_TABLE_SIZE] = {
{ .commands = CMDS(ATA_CMD_ID_ATA, ATA_CMD_ID_ATAPI),
.timeouts = ata_eh_identify_timeouts, },
+ { .commands = CMDS(ATA_CMD_READ_LOG_EXT, ATA_CMD_READ_LOG_DMA_EXT),
+ .timeouts = ata_eh_revalidate_timeouts, },
{ .commands = CMDS(ATA_CMD_READ_NATIVE_MAX, ATA_CMD_READ_NATIVE_MAX_EXT),
.timeouts = ata_eh_other_timeouts, },
{ .commands = CMDS(ATA_CMD_SET_MAX, ATA_CMD_SET_MAX_EXT),
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -409,7 +409,7 @@ enum {
/* This should match the actual table size of
* ata_eh_cmd_timeout_table in libata-eh.c.
*/
- ATA_EH_CMD_TIMEOUT_TABLE_SIZE = 6,
+ ATA_EH_CMD_TIMEOUT_TABLE_SIZE = 7,
/* Horkage types. May be set by libata or controller on drives
(some horkage may be drive/controller pair dependent */
From: Helge Deller <[email protected]>
commit 8779e05ba8aaffec1829872ef9774a71f44f6580 upstream.
The TIF_XXX flags are stored in the flags field in the thread_info
struct (TI_FLAGS), not in the flags field of the task_struct structure
(TASK_FLAGS).
It seems this bug didn't generate any important side-effects, otherwise it
wouldn't have went unnoticed for 12 years (since v2.6.32).
Signed-off-by: Helge Deller <[email protected]>
Fixes: ecd3d4bc06e48 ("parisc: stop using task->ptrace for {single,block}step flags")
Cc: Kyle McMartin <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/parisc/kernel/entry.S | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/parisc/kernel/entry.S
+++ b/arch/parisc/kernel/entry.S
@@ -1849,7 +1849,7 @@ syscall_restore:
LDREG TI_TASK-THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r1
/* Are we being ptraced? */
- ldw TASK_FLAGS(%r1),%r19
+ LDREG TI_FLAGS-THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r19
ldi _TIF_SYSCALL_TRACE_MASK,%r2
and,COND(=) %r19,%r2,%r0
b,n syscall_restore_rfi
From: Christian Löhle <[email protected]>
commit 43592c8736e84025d7a45e61a46c3fa40536a364 upstream.
Only wait for DRTO on reads, otherwise the driver hangs.
The driver prevents sending CMD12 on response errors like CRCs. According
to the comment this is because some cards have problems with this during
the UHS tuning sequence. Unfortunately this workaround currently also
applies for any command with data. On reads this will set the drto timer,
which then triggers after a while. On writes this will not set any timer
and the tasklet will not be scheduled again.
I cannot test for the UHS workarounds need, but even if so, it should at
most apply to reads. I have observed many hangs when CMD25 response
contained a CRC error. This patch fixes this without touching the actual
UHS tuning workaround.
Signed-off-by: Christian Loehle <[email protected]>
Reviewed-by: Jaehoon Chung <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mmc/host/dw_mmc.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -2047,7 +2047,8 @@ static void dw_mci_tasklet_func(unsigned
* delayed. Allowing the transfer to take place
* avoids races and keeps things simple.
*/
- if (err != -ETIMEDOUT) {
+ if (err != -ETIMEDOUT &&
+ host->dir_status == DW_MCI_RECV_STATUS) {
state = STATE_SENDING_DATA;
continue;
}
From: Ingmar Klein <[email protected]>
commit e3f4bd3462f6f796594ecc0dda7144ed2d1e5a26 upstream.
When passing the Atheros QCA6174 through to a virtual machine, the VM hangs
at the point where the ath10k driver loads.
Add a quirk to avoid bus resets on this device, which avoids the hang.
[bhelgaas: commit log]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ingmar Klein <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Reviewed-by: Pali Rohár <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/quirks.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -3414,6 +3414,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_A
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATHEROS, 0x003c, quirk_no_bus_reset);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATHEROS, 0x0033, quirk_no_bus_reset);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATHEROS, 0x0034, quirk_no_bus_reset);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATHEROS, 0x003e, quirk_no_bus_reset);
/*
* Some TI KeyStone C667X devices do not support bus/hot reset. The PCIESS
From: Johan Hovold <[email protected]>
commit 2e9be536a213e838daed6ba42024dd68954ac061 upstream.
USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.
Fixes: 605bebe23bf6 ("[PATCH] Add rtl8187 wireless driver")
Cc: [email protected] # 2.6.23
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/realtek/rtl818x/rtl8187/rtl8225.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
--- a/drivers/net/wireless/realtek/rtl818x/rtl8187/rtl8225.c
+++ b/drivers/net/wireless/realtek/rtl818x/rtl8187/rtl8225.c
@@ -31,7 +31,7 @@ u8 rtl818x_ioread8_idx(struct rtl8187_pr
usb_control_msg(priv->udev, usb_rcvctrlpipe(priv->udev, 0),
RTL8187_REQ_GET_REG, RTL8187_REQT_READ,
(unsigned long)addr, idx & 0x03,
- &priv->io_dmabuf->bits8, sizeof(val), HZ / 2);
+ &priv->io_dmabuf->bits8, sizeof(val), 500);
val = priv->io_dmabuf->bits8;
mutex_unlock(&priv->io_mutex);
@@ -48,7 +48,7 @@ u16 rtl818x_ioread16_idx(struct rtl8187_
usb_control_msg(priv->udev, usb_rcvctrlpipe(priv->udev, 0),
RTL8187_REQ_GET_REG, RTL8187_REQT_READ,
(unsigned long)addr, idx & 0x03,
- &priv->io_dmabuf->bits16, sizeof(val), HZ / 2);
+ &priv->io_dmabuf->bits16, sizeof(val), 500);
val = priv->io_dmabuf->bits16;
mutex_unlock(&priv->io_mutex);
@@ -65,7 +65,7 @@ u32 rtl818x_ioread32_idx(struct rtl8187_
usb_control_msg(priv->udev, usb_rcvctrlpipe(priv->udev, 0),
RTL8187_REQ_GET_REG, RTL8187_REQT_READ,
(unsigned long)addr, idx & 0x03,
- &priv->io_dmabuf->bits32, sizeof(val), HZ / 2);
+ &priv->io_dmabuf->bits32, sizeof(val), 500);
val = priv->io_dmabuf->bits32;
mutex_unlock(&priv->io_mutex);
@@ -82,7 +82,7 @@ void rtl818x_iowrite8_idx(struct rtl8187
usb_control_msg(priv->udev, usb_sndctrlpipe(priv->udev, 0),
RTL8187_REQ_SET_REG, RTL8187_REQT_WRITE,
(unsigned long)addr, idx & 0x03,
- &priv->io_dmabuf->bits8, sizeof(val), HZ / 2);
+ &priv->io_dmabuf->bits8, sizeof(val), 500);
mutex_unlock(&priv->io_mutex);
}
@@ -96,7 +96,7 @@ void rtl818x_iowrite16_idx(struct rtl818
usb_control_msg(priv->udev, usb_sndctrlpipe(priv->udev, 0),
RTL8187_REQ_SET_REG, RTL8187_REQT_WRITE,
(unsigned long)addr, idx & 0x03,
- &priv->io_dmabuf->bits16, sizeof(val), HZ / 2);
+ &priv->io_dmabuf->bits16, sizeof(val), 500);
mutex_unlock(&priv->io_mutex);
}
@@ -110,7 +110,7 @@ void rtl818x_iowrite32_idx(struct rtl818
usb_control_msg(priv->udev, usb_sndctrlpipe(priv->udev, 0),
RTL8187_REQ_SET_REG, RTL8187_REQT_WRITE,
(unsigned long)addr, idx & 0x03,
- &priv->io_dmabuf->bits32, sizeof(val), HZ / 2);
+ &priv->io_dmabuf->bits32, sizeof(val), 500);
mutex_unlock(&priv->io_mutex);
}
@@ -186,7 +186,7 @@ static void rtl8225_write_8051(struct ie
usb_control_msg(priv->udev, usb_sndctrlpipe(priv->udev, 0),
RTL8187_REQ_SET_REG, RTL8187_REQT_WRITE,
addr, 0x8225, &priv->io_dmabuf->bits16, sizeof(data),
- HZ / 2);
+ 500);
mutex_unlock(&priv->io_mutex);
From: Austin Kim <[email protected]>
commit 32ba540f3c2a7ef61ed5a577ce25069a3d714fc9 upstream.
The evm_fixmode is only configurable by command-line option and it is never
modified outside initcalls, so declaring it with __ro_after_init is better.
Signed-off-by: Austin Kim <[email protected]>
Cc: [email protected]
Signed-off-by: Mimi Zohar <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
security/integrity/evm/evm_main.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/security/integrity/evm/evm_main.c
+++ b/security/integrity/evm/evm_main.c
@@ -56,7 +56,7 @@ char *evm_config_xattrnames[] = {
NULL
};
-static int evm_fixmode;
+static int evm_fixmode __ro_after_init;
static int __init evm_set_fixmode(char *str)
{
if (strncmp(str, "fix", 3) == 0)
From: Jonas Dreßler <[email protected]>
commit e5f4eb8223aa740237cd463246a7debcddf4eda1 upstream.
On the 88W8897 PCIe+USB card the firmware randomly crashes after setting
the TX ring write pointer. The issue is present in the latest firmware
version 15.68.19.p21 of the PCIe+USB card.
Those firmware crashes can be worked around by reading any PCI register
of the card after setting that register, so read the PCI_VENDOR_ID
register here. The reason this works is probably because we keep the bus
from entering an ASPM state for a bit longer, because that's what causes
the cards firmware to crash.
This fixes a bug where during RX/TX traffic and with ASPM L1 substates
enabled (the specific substates where the issue happens appear to be
platform dependent), the firmware crashes and eventually a command
timeout appears in the logs.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=109681
Cc: [email protected]
Signed-off-by: Jonas Dreßler <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/marvell/mwifiex/pcie.c | 8 ++++++++
1 file changed, 8 insertions(+)
--- a/drivers/net/wireless/marvell/mwifiex/pcie.c
+++ b/drivers/net/wireless/marvell/mwifiex/pcie.c
@@ -1316,6 +1316,14 @@ mwifiex_pcie_send_data(struct mwifiex_ad
ret = -1;
goto done_unmap;
}
+
+ /* The firmware (latest version 15.68.19.p21) of the 88W8897 PCIe+USB card
+ * seems to crash randomly after setting the TX ring write pointer when
+ * ASPM powersaving is enabled. A workaround seems to be keeping the bus
+ * busy by reading a random register afterwards.
+ */
+ mwifiex_read_reg(adapter, PCI_VENDOR_ID, &rx_val);
+
if ((mwifiex_pcie_txbd_not_full(card)) &&
tx_param->next_pkt_len) {
/* have more packets and TxBD still can hold more */
From: Loic Poulain <[email protected]>
commit 960ae77f25631bbe4e3aafefe209b52e044baf31 upstream.
All wcn36xx controllers are supposed to support HT40 (and SGI40),
This doubles the maximum bitrate/throughput with compatible APs.
Tested with wcn3620 & wcn3680B.
Cc: [email protected]
Fixes: 8e84c2582169 ("wcn36xx: mac80211 driver for Qualcomm WCN3660/WCN3680 hardware")
Signed-off-by: Loic Poulain <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/ath/wcn36xx/main.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/net/wireless/ath/wcn36xx/main.c
+++ b/drivers/net/wireless/ath/wcn36xx/main.c
@@ -133,7 +133,9 @@ static struct ieee80211_supported_band w
.cap = IEEE80211_HT_CAP_GRN_FLD |
IEEE80211_HT_CAP_SGI_20 |
IEEE80211_HT_CAP_DSSSCCK40 |
- IEEE80211_HT_CAP_LSIG_TXOP_PROT,
+ IEEE80211_HT_CAP_LSIG_TXOP_PROT |
+ IEEE80211_HT_CAP_SGI_40 |
+ IEEE80211_HT_CAP_SUP_WIDTH_20_40,
.ht_supported = true,
.ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K,
.ampdu_density = IEEE80211_HT_MPDU_DENSITY_16,
From: Benjamin Li <[email protected]>
commit d6dbce453b19c64b96f3e927b10230f9a704b504 upstream.
Firmware sends delete_sta_context_ind when it detects the AP has gone
away in STA mode. Right now the handler for that indication only handles
AP mode; fix it to also handle STA mode.
Cc: [email protected]
Signed-off-by: Benjamin Li <[email protected]>
Reviewed-by: Bryan O'Donoghue <[email protected]>
Reviewed-by: Loic Poulain <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/ath/wcn36xx/smd.c | 44 ++++++++++++++++++++++++---------
1 file changed, 33 insertions(+), 11 deletions(-)
--- a/drivers/net/wireless/ath/wcn36xx/smd.c
+++ b/drivers/net/wireless/ath/wcn36xx/smd.c
@@ -2082,30 +2082,52 @@ static int wcn36xx_smd_delete_sta_contex
size_t len)
{
struct wcn36xx_hal_delete_sta_context_ind_msg *rsp = buf;
- struct wcn36xx_vif *tmp;
+ struct wcn36xx_vif *vif_priv;
+ struct ieee80211_vif *vif;
+ struct ieee80211_bss_conf *bss_conf;
struct ieee80211_sta *sta;
+ bool found = false;
if (len != sizeof(*rsp)) {
wcn36xx_warn("Corrupted delete sta indication\n");
return -EIO;
}
- wcn36xx_dbg(WCN36XX_DBG_HAL, "delete station indication %pM index %d\n",
- rsp->addr2, rsp->sta_id);
+ wcn36xx_dbg(WCN36XX_DBG_HAL,
+ "delete station indication %pM index %d reason %d\n",
+ rsp->addr2, rsp->sta_id, rsp->reason_code);
- list_for_each_entry(tmp, &wcn->vif_list, list) {
+ list_for_each_entry(vif_priv, &wcn->vif_list, list) {
rcu_read_lock();
- sta = ieee80211_find_sta(wcn36xx_priv_to_vif(tmp), rsp->addr2);
- if (sta)
- ieee80211_report_low_ack(sta, 0);
+ vif = wcn36xx_priv_to_vif(vif_priv);
+
+ if (vif->type == NL80211_IFTYPE_STATION) {
+ /* We could call ieee80211_find_sta too, but checking
+ * bss_conf is clearer.
+ */
+ bss_conf = &vif->bss_conf;
+ if (vif_priv->sta_assoc &&
+ !memcmp(bss_conf->bssid, rsp->addr2, ETH_ALEN)) {
+ found = true;
+ wcn36xx_dbg(WCN36XX_DBG_HAL,
+ "connection loss bss_index %d\n",
+ vif_priv->bss_index);
+ ieee80211_connection_loss(vif);
+ }
+ } else {
+ sta = ieee80211_find_sta(vif, rsp->addr2);
+ if (sta) {
+ found = true;
+ ieee80211_report_low_ack(sta, 0);
+ }
+ }
+
rcu_read_unlock();
- if (sta)
+ if (found)
return 0;
}
- wcn36xx_warn("STA with addr %pM and index %d not found\n",
- rsp->addr2,
- rsp->sta_id);
+ wcn36xx_warn("BSS or STA with addr %pM not found\n", rsp->addr2);
return -ENOENT;
}
From: Reimar Döffinger <[email protected]>
commit f971a85439bd25dc7b4d597cf5e4e8dc7ffc884b upstream.
Checking if DMA is enabled should be done via the
ata_dma_enabled helper function, since the init state
0xff indicates disabled.
This meant that ATA_CMD_READ_LOG_DMA_EXT was used and probed
for before DMA was enabled, which caused hangs for some combinations
of controllers and devices.
It might also have caused it to be incorrectly disabled as broken,
but there have been no reports of that.
Cc: [email protected]
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=195895
Signed-off-by: Reimar Döffinger <[email protected]>
Tested-by: Paul Menzel <[email protected]>
Signed-off-by: Damien Le Moal <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/ata/libata-core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -2081,7 +2081,7 @@ unsigned int ata_read_log_page(struct at
retry:
ata_tf_init(dev, &tf);
- if (dev->dma_mode && ata_id_has_read_log_dma_ext(dev->id) &&
+ if (ata_dma_enabled(dev) && ata_id_has_read_log_dma_ext(dev->id) &&
!(dev->horkage & ATA_HORKAGE_NO_DMA_LOG)) {
tf.command = ATA_CMD_READ_LOG_DMA_EXT;
tf.protocol = ATA_PROT_DMA;
From: Alok Prasad <[email protected]>
commit 4f960393a0ee9a39469ceb7c8077ae8db665cc12 upstream.
This patch fixes a crash caused by querying the QP via netlink, and
corrects the state of GSI qp. GSI qp's have a NULL qed_qp.
The call trace is generated by:
$ rdma res show
BUG: kernel NULL pointer dereference, address: 0000000000000034
Hardware name: Dell Inc. PowerEdge R720/0M1GCR, BIOS 1.2.6 05/10/2012
RIP: 0010:qed_rdma_query_qp+0x33/0x1a0 [qed]
RSP: 0018:ffffba560a08f580 EFLAGS: 00010206
RAX: 0000000200000000 RBX: ffffba560a08f5b8 RCX: 0000000000000000
RDX: ffffba560a08f5b8 RSI: 0000000000000000 RDI: ffff9807ee458090
RBP: ffffba560a08f5a0 R08: 0000000000000000 R09: ffff9807890e7048
R10: ffffba560a08f658 R11: 0000000000000000 R12: 0000000000000000
R13: ffff9807ee458090 R14: ffff9807f0afb000 R15: ffffba560a08f7ec
FS: 00007fbbf8bfe740(0000) GS:ffff980aafa00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000034 CR3: 00000001720ba001 CR4: 00000000000606f0
Call Trace:
qedr_query_qp+0x82/0x360 [qedr]
ib_query_qp+0x34/0x40 [ib_core]
? ib_query_qp+0x34/0x40 [ib_core]
fill_res_qp_entry_query.isra.26+0x47/0x1d0 [ib_core]
? __nla_put+0x20/0x30
? nla_put+0x33/0x40
fill_res_qp_entry+0xe3/0x120 [ib_core]
res_get_common_dumpit+0x3f8/0x5d0 [ib_core]
? fill_res_cm_id_entry+0x1f0/0x1f0 [ib_core]
nldev_res_get_qp_dumpit+0x1a/0x20 [ib_core]
netlink_dump+0x156/0x2f0
__netlink_dump_start+0x1ab/0x260
rdma_nl_rcv+0x1de/0x330 [ib_core]
? nldev_res_get_cm_id_dumpit+0x20/0x20 [ib_core]
netlink_unicast+0x1b8/0x270
netlink_sendmsg+0x33e/0x470
sock_sendmsg+0x63/0x70
__sys_sendto+0x13f/0x180
? setup_sgl.isra.12+0x70/0xc0
__x64_sys_sendto+0x28/0x30
do_syscall_64+0x3a/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xae
Cc: [email protected]
Fixes: cecbcddf6461 ("qedr: Add support for QP verbs")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ariel Elior <[email protected]>
Signed-off-by: Shai Malin <[email protected]>
Signed-off-by: Prabhakar Kushwaha <[email protected]>
Signed-off-by: Alok Prasad <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/infiniband/hw/qedr/verbs.c | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)
--- a/drivers/infiniband/hw/qedr/verbs.c
+++ b/drivers/infiniband/hw/qedr/verbs.c
@@ -2045,15 +2045,18 @@ int qedr_query_qp(struct ib_qp *ibqp,
int rc = 0;
memset(¶ms, 0, sizeof(params));
-
- rc = dev->ops->rdma_query_qp(dev->rdma_ctx, qp->qed_qp, ¶ms);
- if (rc)
- goto err;
-
memset(qp_attr, 0, sizeof(*qp_attr));
memset(qp_init_attr, 0, sizeof(*qp_init_attr));
- qp_attr->qp_state = qedr_get_ibqp_state(params.state);
+ if (qp->qp_type != IB_QPT_GSI) {
+ rc = dev->ops->rdma_query_qp(dev->rdma_ctx, qp->qed_qp, ¶ms);
+ if (rc)
+ goto err;
+ qp_attr->qp_state = qedr_get_ibqp_state(params.state);
+ } else {
+ qp_attr->qp_state = qedr_get_ibqp_state(QED_ROCE_QP_STATE_RTS);
+ }
+
qp_attr->cur_qp_state = qedr_get_ibqp_state(params.state);
qp_attr->path_mtu = ib_mtu_int_to_enum(params.mtu);
qp_attr->path_mig_state = IB_MIG_MIGRATED;
From: Eric W. Biederman <[email protected]>
commit 7d613f9f72ec8f90ddefcae038fdae5adb8404b3 upstream.
The existence of sigkill_pending is a little silly as it is
functionally a duplicate of fatal_signal_pending that is used in
exactly one place.
Checking for pending fatal signals and returning early in ptrace_stop
is actively harmful. It casues the ptrace_stop called by
ptrace_signal to return early before setting current->exit_code.
Later when ptrace_signal reads the signal number from
current->exit_code is undefined, making it unpredictable what will
happen.
Instead rely on the fact that schedule will not sleep if there is a
pending signal that can awaken a task.
Removing the explict sigkill_pending test fixes fixes ptrace_signal
when ptrace_stop does not stop because current->exit_code is always
set to to signr.
Cc: [email protected]
Fixes: 3d749b9e676b ("ptrace: simplify ptrace_stop()->sigkill_pending() path")
Fixes: 1a669c2f16d4 ("Add arch_ptrace_stop")
Link: https://lkml.kernel.org/r/87pmsyx29t.fsf@disp2133
Reviewed-by: Kees Cook <[email protected]>
Signed-off-by: "Eric W. Biederman" <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/signal.c | 19 ++++---------------
1 file changed, 4 insertions(+), 15 deletions(-)
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -1839,16 +1839,6 @@ static inline int may_ptrace_stop(void)
}
/*
- * Return non-zero if there is a SIGKILL that should be waking us up.
- * Called with the siglock held.
- */
-static int sigkill_pending(struct task_struct *tsk)
-{
- return sigismember(&tsk->pending.signal, SIGKILL) ||
- sigismember(&tsk->signal->shared_pending.signal, SIGKILL);
-}
-
-/*
* This must be called with current->sighand->siglock held.
*
* This should be the path for all ptrace stops.
@@ -1873,17 +1863,16 @@ static void ptrace_stop(int exit_code, i
* calling arch_ptrace_stop, so we must release it now.
* To preserve proper semantics, we must do this before
* any signal bookkeeping like checking group_stop_count.
- * Meanwhile, a SIGKILL could come in before we retake the
- * siglock. That must prevent us from sleeping in TASK_TRACED.
- * So after regaining the lock, we must check for SIGKILL.
*/
spin_unlock_irq(¤t->sighand->siglock);
arch_ptrace_stop(exit_code, info);
spin_lock_irq(¤t->sighand->siglock);
- if (sigkill_pending(current))
- return;
}
+ /*
+ * schedule() will not sleep if there is a pending signal that
+ * can awaken the task.
+ */
set_special_state(TASK_TRACED);
/*
From: Eric W. Biederman <[email protected]>
commit 95bf9d646c3c3f95cb0be7e703b371db8da5be68 upstream.
When an instruction to save or restore a register from the stack fails
in _save_fp_context or _restore_fp_context return with -EFAULT. This
change was made to r2300_fpu.S[1] but it looks like it got lost with
the introduction of EX2[2]. This is also what the other implementation
of _save_fp_context and _restore_fp_context in r4k_fpu.S does, and
what is needed for the callers to be able to handle the error.
Furthermore calling do_exit(SIGSEGV) from bad_stack is wrong because
it does not terminate the entire process it just terminates a single
thread.
As the changed code was the only caller of arch/mips/kernel/syscall.c:bad_stack
remove the problematic and now unused helper function.
Cc: Thomas Bogendoerfer <[email protected]>
Cc: Maciej Rozycki <[email protected]>
Cc: [email protected]
[1] 35938a00ba86 ("MIPS: Fix ISA I FP sigcontext access violation handling")
[2] f92722dc4545 ("MIPS: Correct MIPS I FP sigcontext layout")
Cc: [email protected]
Fixes: f92722dc4545 ("MIPS: Correct MIPS I FP sigcontext layout")
Acked-by: Maciej W. Rozycki <[email protected]>
Acked-by: Thomas Bogendoerfer <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Eric W. Biederman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/mips/kernel/r2300_fpu.S | 4 ++--
arch/mips/kernel/syscall.c | 9 ---------
2 files changed, 2 insertions(+), 11 deletions(-)
--- a/arch/mips/kernel/r2300_fpu.S
+++ b/arch/mips/kernel/r2300_fpu.S
@@ -29,8 +29,8 @@
#define EX2(a,b) \
9: a,##b; \
.section __ex_table,"a"; \
- PTR 9b,bad_stack; \
- PTR 9b+4,bad_stack; \
+ PTR 9b,fault; \
+ PTR 9b+4,fault; \
.previous
.set mips1
--- a/arch/mips/kernel/syscall.c
+++ b/arch/mips/kernel/syscall.c
@@ -233,12 +233,3 @@ SYSCALL_DEFINE3(cachectl, char *, addr,
{
return -ENOSYS;
}
-
-/*
- * If we ever come here the user sp is bad. Zap the process right away.
- * Due to the bad stack signaling wouldn't work.
- */
-asmlinkage void bad_stack(void)
-{
- do_exit(SIGSEGV);
-}
From: Krzysztof Kozlowski <[email protected]>
commit b16bef60a9112b1e6daf3afd16484eb06e7ce792 upstream.
The driver and its bindings, before commit 04f9f068a619 ("regulator:
s5m8767: Modify parsing method of the voltage table of buck2/3/4") were
requiring to provide at least one safe/default voltage for DVS registers
if DVS GPIO is not being enabled.
IOW, if s5m8767,pmic-buck2-uses-gpio-dvs is missing, the
s5m8767,pmic-buck2-dvs-voltage should still be present and contain one
voltage.
This requirement was coming from driver behavior matching this condition
(none of DVS GPIO is enabled): it was always initializing the DVS
selector pins to 0 and keeping the DVS enable setting at reset value
(enabled). Therefore if none of DVS GPIO is enabled in devicetree,
driver was configuring the first DVS voltage for buck[234].
Mentioned commit 04f9f068a619 ("regulator: s5m8767: Modify parsing
method of the voltage table of buck2/3/4") broke it because DVS voltage
won't be parsed from devicetree if DVS GPIO is not enabled. After the
change, driver will configure bucks to use the register reset value as
voltage which might have unpleasant effects.
Fix this by relaxing the bindings constrain: if DVS GPIO is not enabled
in devicetree (therefore DVS voltage is also not parsed), explicitly
disable it.
Cc: <[email protected]>
Fixes: 04f9f068a619 ("regulator: s5m8767: Modify parsing method of the voltage table of buck2/3/4")
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Acked-by: Rob Herring <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt | 21 +++-------
drivers/regulator/s5m8767.c | 21 ++++------
2 files changed, 17 insertions(+), 25 deletions(-)
--- a/Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt
+++ b/Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt
@@ -13,6 +13,14 @@ common regulator binding documented in:
Required properties of the main device node (the parent!):
+ - s5m8767,pmic-buck-ds-gpios: GPIO specifiers for three host gpio's used
+ for selecting GPIO DVS lines. It is one-to-one mapped to dvs gpio lines.
+
+ [1] If either of the 's5m8767,pmic-buck[2/3/4]-uses-gpio-dvs' optional
+ property is specified, then all the eight voltage values for the
+ 's5m8767,pmic-buck[2/3/4]-dvs-voltage' should be specified.
+
+Optional properties of the main device node (the parent!):
- s5m8767,pmic-buck2-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
units for buck2 when changing voltage using gpio dvs. Refer to [1] below
for additional information.
@@ -25,19 +33,6 @@ Required properties of the main device n
units for buck4 when changing voltage using gpio dvs. Refer to [1] below
for additional information.
- - s5m8767,pmic-buck-ds-gpios: GPIO specifiers for three host gpio's used
- for selecting GPIO DVS lines. It is one-to-one mapped to dvs gpio lines.
-
- [1] If none of the 's5m8767,pmic-buck[2/3/4]-uses-gpio-dvs' optional
- property is specified, the 's5m8767,pmic-buck[2/3/4]-dvs-voltage'
- property should specify atleast one voltage level (which would be a
- safe operating voltage).
-
- If either of the 's5m8767,pmic-buck[2/3/4]-uses-gpio-dvs' optional
- property is specified, then all the eight voltage values for the
- 's5m8767,pmic-buck[2/3/4]-dvs-voltage' should be specified.
-
-Optional properties of the main device node (the parent!):
- s5m8767,pmic-buck2-uses-gpio-dvs: 'buck2' can be controlled by gpio dvs.
- s5m8767,pmic-buck3-uses-gpio-dvs: 'buck3' can be controlled by gpio dvs.
- s5m8767,pmic-buck4-uses-gpio-dvs: 'buck4' can be controlled by gpio dvs.
--- a/drivers/regulator/s5m8767.c
+++ b/drivers/regulator/s5m8767.c
@@ -845,18 +845,15 @@ static int s5m8767_pmic_probe(struct pla
/* DS4 GPIO */
gpio_direction_output(pdata->buck_ds[2], 0x0);
- if (pdata->buck2_gpiodvs || pdata->buck3_gpiodvs ||
- pdata->buck4_gpiodvs) {
- regmap_update_bits(s5m8767->iodev->regmap_pmic,
- S5M8767_REG_BUCK2CTRL, 1 << 1,
- (pdata->buck2_gpiodvs) ? (1 << 1) : (0 << 1));
- regmap_update_bits(s5m8767->iodev->regmap_pmic,
- S5M8767_REG_BUCK3CTRL, 1 << 1,
- (pdata->buck3_gpiodvs) ? (1 << 1) : (0 << 1));
- regmap_update_bits(s5m8767->iodev->regmap_pmic,
- S5M8767_REG_BUCK4CTRL, 1 << 1,
- (pdata->buck4_gpiodvs) ? (1 << 1) : (0 << 1));
- }
+ regmap_update_bits(s5m8767->iodev->regmap_pmic,
+ S5M8767_REG_BUCK2CTRL, 1 << 1,
+ (pdata->buck2_gpiodvs) ? (1 << 1) : (0 << 1));
+ regmap_update_bits(s5m8767->iodev->regmap_pmic,
+ S5M8767_REG_BUCK3CTRL, 1 << 1,
+ (pdata->buck3_gpiodvs) ? (1 << 1) : (0 << 1));
+ regmap_update_bits(s5m8767->iodev->regmap_pmic,
+ S5M8767_REG_BUCK4CTRL, 1 << 1,
+ (pdata->buck4_gpiodvs) ? (1 << 1) : (0 << 1));
/* Initialize GPIO DVS registers */
for (i = 0; i < 8; i++) {
From: Sebastian Krzyszkowiak <[email protected]>
commit e660dbb68c6b3f7b9eb8b9775846a44f9798b719 upstream.
max17042_set_soc_threshold gets called with offset set to 1, which means
that minimum threshold value would underflow once SOC got down to 0,
causing invalid alerts from the gauge.
Fixes: e5f3872d2044 ("max17042: Add support for signalling change in SOC")
Cc: <[email protected]>
Signed-off-by: Sebastian Krzyszkowiak <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Sebastian Reichel <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/power/supply/max17042_battery.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/power/supply/max17042_battery.c
+++ b/drivers/power/supply/max17042_battery.c
@@ -825,7 +825,8 @@ static void max17042_set_soc_threshold(s
regmap_read(map, MAX17042_RepSOC, &soc);
soc >>= 8;
soc_tr = (soc + off) << 8;
- soc_tr |= (soc - off);
+ if (off < soc)
+ soc_tr |= soc - off;
regmap_write(map, MAX17042_SALRT_Th, soc_tr);
}
From: Henrik Grimler <[email protected]>
commit 223a3b82834f036a62aa831f67cbf1f1d644c6e2 upstream.
On Galaxy S3 (i9300/i9305), which has the max17047 fuel gauge and no
current sense resistor (rsns), the RepSOC register does not provide an
accurate state of charge value. The reported value is wrong, and does
not change over time. VFSOC however, which uses the voltage fuel gauge
to determine the state of charge, always shows an accurate value.
For devices without current sense, VFSOC is already used for the
soc-alert (0x0003 is written to MiscCFG register), so with this change
the source of the alert and the PROP_CAPACITY value match.
Fixes: 359ab9f5b154 ("power_supply: Add MAX17042 Fuel Gauge Driver")
Cc: <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Suggested-by: Wolfgang Wiedmeyer <[email protected]>
Signed-off-by: Henrik Grimler <[email protected]>
Reviewed-by: Hans de Goede <[email protected]>
Signed-off-by: Sebastian Reichel <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/power/supply/max17042_battery.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/drivers/power/supply/max17042_battery.c
+++ b/drivers/power/supply/max17042_battery.c
@@ -303,7 +303,10 @@ static int max17042_get_property(struct
val->intval = data * 625 / 8;
break;
case POWER_SUPPLY_PROP_CAPACITY:
- ret = regmap_read(map, MAX17042_RepSOC, &data);
+ if (chip->pdata->enable_current_sense)
+ ret = regmap_read(map, MAX17042_RepSOC, &data);
+ else
+ ret = regmap_read(map, MAX17042_VFSOC, &data);
if (ret < 0)
return ret;
From: Xiaoming Ni <[email protected]>
commit 3c2172c1c47b4079c29f0e6637d764a99355ebcd upstream.
When the field described in mpc85xx_smp_guts_ids[] is not configured in
dtb, the mpc85xx_setup_pmc() does not assign a value to the "guts"
variable. As a result, the oops is triggered when
mpc85xx_freeze_time_base() is executed.
Fixes: 56f1ba280719 ("powerpc/mpc85xx: refactor the PM operations")
Cc: [email protected] # v4.6+
Signed-off-by: Xiaoming Ni <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/platforms/85xx/mpc85xx_pm_ops.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
--- a/arch/powerpc/platforms/85xx/mpc85xx_pm_ops.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_pm_ops.c
@@ -98,9 +98,8 @@ int __init mpc85xx_setup_pmc(void)
pr_err("Could not map guts node address\n");
return -ENOMEM;
}
+ qoriq_pm_ops = &mpc85xx_pm_ops;
}
- qoriq_pm_ops = &mpc85xx_pm_ops;
-
return 0;
}
From: Pali Rohár <[email protected]>
commit 027b57170bf8bb6999a28e4a5f3d78bf1db0f90c upstream.
Since commit edc6afc54968 ("tty: switch to ktermios and new framework")
termios speed is no longer stored only in c_cflag member but also in new
additional c_ispeed and c_ospeed members. If BOTHER flag is set in c_cflag
then termios speed is stored only in these new members.
Therefore to correctly restore termios speed it is required to store also
ispeed and ospeed members, not only cflag member.
In case only cflag member with BOTHER flag is restored then functions
tty_termios_baud_rate() and tty_termios_input_baud_rate() returns baudrate
stored in c_ospeed / c_ispeed member, which is zero as it was not restored
too. If reported baudrate is invalid (e.g. zero) then serial core functions
report fallback baudrate value 9600. So it means that in this case original
baudrate is lost and kernel changes it to value 9600.
Simple reproducer of this issue is to boot kernel with following command
line argument: "console=ttyXXX,86400" (where ttyXXX is the device name).
For speed 86400 there is no Bnnn constant and therefore kernel has to
represent this speed via BOTHER c_cflag. Which means that speed is stored
only in c_ospeed and c_ispeed members, not in c_cflag anymore.
If bootloader correctly configures serial device to speed 86400 then kernel
prints boot log to early console at speed speed 86400 without any issue.
But after kernel starts initializing real console device ttyXXX then speed
is changed to fallback value 9600 because information about speed was lost.
This patch fixes above issue by storing and restoring also ispeed and
ospeed members, which are required for BOTHER flag.
Fixes: edc6afc54968 ("[PATCH] tty: switch to ktermios and new framework")
Cc: [email protected]
Signed-off-by: Pali Rohár <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/tty/serial/serial_core.c | 16 ++++++++++++++--
include/linux/console.h | 2 ++
2 files changed, 16 insertions(+), 2 deletions(-)
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -232,7 +232,11 @@ static int uart_port_startup(struct tty_
if (retval == 0) {
if (uart_console(uport) && uport->cons->cflag) {
tty->termios.c_cflag = uport->cons->cflag;
+ tty->termios.c_ispeed = uport->cons->ispeed;
+ tty->termios.c_ospeed = uport->cons->ospeed;
uport->cons->cflag = 0;
+ uport->cons->ispeed = 0;
+ uport->cons->ospeed = 0;
}
/*
* Initialise the hardware port settings.
@@ -300,8 +304,11 @@ static void uart_shutdown(struct tty_str
/*
* Turn off DTR and RTS early.
*/
- if (uport && uart_console(uport) && tty)
+ if (uport && uart_console(uport) && tty) {
uport->cons->cflag = tty->termios.c_cflag;
+ uport->cons->ispeed = tty->termios.c_ispeed;
+ uport->cons->ospeed = tty->termios.c_ospeed;
+ }
if (!tty || C_HUPCL(tty))
uart_port_dtr_rts(uport, 0);
@@ -2076,8 +2083,11 @@ uart_set_options(struct uart_port *port,
* Allow the setting of the UART parameters with a NULL console
* too:
*/
- if (co)
+ if (co) {
co->cflag = termios.c_cflag;
+ co->ispeed = termios.c_ispeed;
+ co->ospeed = termios.c_ospeed;
+ }
return 0;
}
@@ -2211,6 +2221,8 @@ int uart_resume_port(struct uart_driver
*/
memset(&termios, 0, sizeof(struct ktermios));
termios.c_cflag = uport->cons->cflag;
+ termios.c_ispeed = uport->cons->ispeed;
+ termios.c_ospeed = uport->cons->ospeed;
/*
* If that's unset, use the tty termios setting.
--- a/include/linux/console.h
+++ b/include/linux/console.h
@@ -145,6 +145,8 @@ struct console {
short flags;
short index;
int cflag;
+ uint ispeed;
+ uint ospeed;
void *data;
struct console *next;
};
From: Pali Rohár <[email protected]>
commit a7ca6d7fa3c02c032db5440ff392d96c04684c21 upstream.
The PCIE_ISR1_REG says which interrupts are currently set / active,
including those which are masked.
The driver currently reads this register and looks if some unmasked
interrupts are active, and if not, it clears status bits of _all_
interrupts, including the masked ones.
This is incorrect, since, for example, some drivers may poll these bits.
Remove this clearing, and also remove this early return statement
completely, since it does not change functionality in any way.
Link: https://lore.kernel.org/r/[email protected]
Fixes: 8c39d710363c ("PCI: aardvark: Add Aardvark PCI host controller driver")
Signed-off-by: Pali Rohár <[email protected]>
Signed-off-by: Marek Behún <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Reviewed-by: Marek Behún <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/host/pci-aardvark.c | 6 ------
1 file changed, 6 deletions(-)
--- a/drivers/pci/host/pci-aardvark.c
+++ b/drivers/pci/host/pci-aardvark.c
@@ -863,12 +863,6 @@ static void advk_pcie_handle_int(struct
isr1_mask = advk_readl(pcie, PCIE_ISR1_MASK_REG);
isr1_status = isr1_val & ((~isr1_mask) & PCIE_ISR1_ALL_MASK);
- if (!isr0_status && !isr1_status) {
- advk_writel(pcie, isr0_val, PCIE_ISR0_REG);
- advk_writel(pcie, isr1_val, PCIE_ISR1_REG);
- return;
- }
-
/* Process MSI interrupts */
if (isr0_status & PCIE_ISR0_MSI_INT_PENDING)
advk_pcie_handle_msi(pcie);
From: Pali Rohár <[email protected]>
commit 1fb95d7d3c7a926b002fe8a6bd27a1cb428b46dc upstream.
There are lot of undocumented interrupt bits. To prevent unwanted
spurious interrupts, fix all *_ALL_MASK macros to define all interrupt
bits, so that driver can properly mask all interrupts, including those
which are undocumented.
Link: https://lore.kernel.org/r/[email protected]
Fixes: 8c39d710363c ("PCI: aardvark: Add Aardvark PCI host controller driver")
Signed-off-by: Pali Rohár <[email protected]>
Signed-off-by: Marek Behún <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Reviewed-by: Marek Behún <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/host/pci-aardvark.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/pci/host/pci-aardvark.c
+++ b/drivers/pci/host/pci-aardvark.c
@@ -100,13 +100,13 @@
#define PCIE_ISR0_MSI_INT_PENDING BIT(24)
#define PCIE_ISR0_INTX_ASSERT(val) BIT(16 + (val))
#define PCIE_ISR0_INTX_DEASSERT(val) BIT(20 + (val))
-#define PCIE_ISR0_ALL_MASK GENMASK(26, 0)
+#define PCIE_ISR0_ALL_MASK GENMASK(31, 0)
#define PCIE_ISR1_REG (CONTROL_BASE_ADDR + 0x48)
#define PCIE_ISR1_MASK_REG (CONTROL_BASE_ADDR + 0x4C)
#define PCIE_ISR1_POWER_STATE_CHANGE BIT(4)
#define PCIE_ISR1_FLUSH BIT(5)
#define PCIE_ISR1_INTX_ASSERT(val) BIT(8 + (val))
-#define PCIE_ISR1_ALL_MASK GENMASK(11, 4)
+#define PCIE_ISR1_ALL_MASK GENMASK(31, 0)
#define PCIE_MSI_ADDR_LOW_REG (CONTROL_BASE_ADDR + 0x50)
#define PCIE_MSI_ADDR_HIGH_REG (CONTROL_BASE_ADDR + 0x54)
#define PCIE_MSI_STATUS_REG (CONTROL_BASE_ADDR + 0x58)
@@ -169,7 +169,7 @@
#define PCIE_IRQ_MSI_INT2_DET BIT(21)
#define PCIE_IRQ_RC_DBELL_DET BIT(22)
#define PCIE_IRQ_EP_STATUS BIT(23)
-#define PCIE_IRQ_ALL_MASK 0xfff0fb
+#define PCIE_IRQ_ALL_MASK GENMASK(31, 0)
#define PCIE_IRQ_ENABLE_INTS_MASK PCIE_IRQ_CORE_INT
/* Transaction types */
From: Juergen Gross <[email protected]>
commit 40fdea0284bb20814399da0484a658a96c735d90 upstream.
When running as PVH or HVM guest with actual memory < max memory the
hypervisor is using "populate on demand" in order to allow the guest
to balloon down from its maximum memory size. For this to work
correctly the guest must not touch more memory pages than its target
memory size as otherwise the PoD cache will be exhausted and the guest
is crashed as a result of that.
In extreme cases ballooning down might not be finished today before
the init process is started, which can consume lots of memory.
In order to avoid random boot crashes in such cases, add a late init
call to wait for ballooning down having finished for PVH/HVM guests.
Warn on console if initial ballooning fails, panic() after stalling
for more than 3 minutes per default. Add a module parameter for
changing this timeout.
[boris: replaced pr_info() with pr_notice()]
Cc: <[email protected]>
Reported-by: Marek Marczykowski-Górecki <[email protected]>
Signed-off-by: Juergen Gross <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Boris Ostrovsky <[email protected]>
Signed-off-by: Boris Ostrovsky <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
Documentation/admin-guide/kernel-parameters.txt | 7 +
drivers/xen/balloon.c | 86 +++++++++++++++++-------
2 files changed, 70 insertions(+), 23 deletions(-)
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -5030,6 +5030,13 @@
Disables the PV optimizations forcing the HVM guest to
run as generic HVM guest with no PV drivers.
+ xen.balloon_boot_timeout= [XEN]
+ The time (in seconds) to wait before giving up to boot
+ in case initial ballooning fails to free enough memory.
+ Applies only when running as HVM or PVH guest and
+ started with less memory configured than allowed at
+ max. Default is 180.
+
xen.event_eoi_delay= [XEN]
How long to delay EOI handling in case of event
storms (jiffies). Default is 10.
--- a/drivers/xen/balloon.c
+++ b/drivers/xen/balloon.c
@@ -58,6 +58,7 @@
#include <linux/percpu-defs.h>
#include <linux/slab.h>
#include <linux/sysctl.h>
+#include <linux/moduleparam.h>
#include <asm/page.h>
#include <asm/pgalloc.h>
@@ -74,6 +75,12 @@
#include <xen/features.h>
#include <xen/page.h>
+#undef MODULE_PARAM_PREFIX
+#define MODULE_PARAM_PREFIX "xen."
+
+static uint __read_mostly balloon_boot_timeout = 180;
+module_param(balloon_boot_timeout, uint, 0444);
+
static int xen_hotplug_unpopulated;
#ifdef CONFIG_XEN_BALLOON_MEMORY_HOTPLUG
@@ -129,12 +136,12 @@ static struct ctl_table xen_root[] = {
* BP_ECANCELED: error, balloon operation canceled.
*/
-enum bp_state {
+static enum bp_state {
BP_DONE,
BP_WAIT,
BP_EAGAIN,
BP_ECANCELED
-};
+} balloon_state = BP_DONE;
/* Main waiting point for xen-balloon thread. */
static DECLARE_WAIT_QUEUE_HEAD(balloon_thread_wq);
@@ -212,18 +219,15 @@ static struct page *balloon_next_page(st
return list_entry(next, struct page, lru);
}
-static enum bp_state update_schedule(enum bp_state state)
+static void update_schedule(void)
{
- if (state == BP_WAIT)
- return BP_WAIT;
-
- if (state == BP_ECANCELED)
- return BP_ECANCELED;
+ if (balloon_state == BP_WAIT || balloon_state == BP_ECANCELED)
+ return;
- if (state == BP_DONE) {
+ if (balloon_state == BP_DONE) {
balloon_stats.schedule_delay = 1;
balloon_stats.retry_count = 1;
- return BP_DONE;
+ return;
}
++balloon_stats.retry_count;
@@ -232,7 +236,8 @@ static enum bp_state update_schedule(enu
balloon_stats.retry_count > balloon_stats.max_retry_count) {
balloon_stats.schedule_delay = 1;
balloon_stats.retry_count = 1;
- return BP_ECANCELED;
+ balloon_state = BP_ECANCELED;
+ return;
}
balloon_stats.schedule_delay <<= 1;
@@ -240,7 +245,7 @@ static enum bp_state update_schedule(enu
if (balloon_stats.schedule_delay > balloon_stats.max_schedule_delay)
balloon_stats.schedule_delay = balloon_stats.max_schedule_delay;
- return BP_EAGAIN;
+ balloon_state = BP_EAGAIN;
}
#ifdef CONFIG_XEN_BALLOON_MEMORY_HOTPLUG
@@ -574,9 +579,9 @@ static enum bp_state decrease_reservatio
* Stop waiting if either state is BP_DONE and ballooning action is
* needed, or if the credit has changed while state is not BP_DONE.
*/
-static bool balloon_thread_cond(enum bp_state state, long credit)
+static bool balloon_thread_cond(long credit)
{
- if (state == BP_DONE)
+ if (balloon_state == BP_DONE)
credit = 0;
return current_credit() != credit || kthread_should_stop();
@@ -590,13 +595,12 @@ static bool balloon_thread_cond(enum bp_
*/
static int balloon_thread(void *unused)
{
- enum bp_state state = BP_DONE;
long credit;
unsigned long timeout;
set_freezable();
for (;;) {
- switch (state) {
+ switch (balloon_state) {
case BP_DONE:
case BP_ECANCELED:
timeout = 3600 * HZ;
@@ -612,7 +616,7 @@ static int balloon_thread(void *unused)
credit = current_credit();
wait_event_freezable_timeout(balloon_thread_wq,
- balloon_thread_cond(state, credit), timeout);
+ balloon_thread_cond(credit), timeout);
if (kthread_should_stop())
return 0;
@@ -623,22 +627,23 @@ static int balloon_thread(void *unused)
if (credit > 0) {
if (balloon_is_inflated())
- state = increase_reservation(credit);
+ balloon_state = increase_reservation(credit);
else
- state = reserve_additional_memory();
+ balloon_state = reserve_additional_memory();
}
if (credit < 0) {
long n_pages;
n_pages = min(-credit, si_mem_available());
- state = decrease_reservation(n_pages, GFP_BALLOON);
- if (state == BP_DONE && n_pages != -credit &&
+ balloon_state = decrease_reservation(n_pages,
+ GFP_BALLOON);
+ if (balloon_state == BP_DONE && n_pages != -credit &&
n_pages < totalreserve_pages)
- state = BP_EAGAIN;
+ balloon_state = BP_EAGAIN;
}
- state = update_schedule(state);
+ update_schedule();
mutex_unlock(&balloon_mutex);
@@ -847,3 +852,38 @@ static int __init balloon_init(void)
return 0;
}
subsys_initcall(balloon_init);
+
+static int __init balloon_wait_finish(void)
+{
+ long credit, last_credit = 0;
+ unsigned long last_changed = 0;
+
+ if (!xen_domain())
+ return -ENODEV;
+
+ /* PV guests don't need to wait. */
+ if (xen_pv_domain() || !current_credit())
+ return 0;
+
+ pr_notice("Waiting for initial ballooning down having finished.\n");
+
+ while ((credit = current_credit()) < 0) {
+ if (credit != last_credit) {
+ last_changed = jiffies;
+ last_credit = credit;
+ }
+ if (balloon_state == BP_ECANCELED) {
+ pr_warn_once("Initial ballooning failed, %ld pages need to be freed.\n",
+ -credit);
+ if (jiffies - last_changed >= HZ * balloon_boot_timeout)
+ panic("Initial ballooning failed!\n");
+ }
+
+ schedule_timeout_interruptible(HZ / 10);
+ }
+
+ pr_notice("Initial ballooning down finished.\n");
+
+ return 0;
+}
+late_initcall_sync(balloon_wait_finish);
From: Pavel Skripkin <[email protected]>
commit 3ab7992018455ac63c33e9b3eaa7264e293e40f4 upstream.
In commit 411cef6adfb3 ("ALSA: mixer: oss: Fix racy access to slots")
added mutex protection in snd_mixer_oss_set_volume(). Second
mutex_lock() in same function looks like typo, fix it.
Reported-by: [email protected]
Fixes: 411cef6adfb3 ("ALSA: mixer: oss: Fix racy access to slots")
Cc: <[email protected]>
Signed-off-by: Pavel Skripkin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/core/oss/mixer_oss.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/sound/core/oss/mixer_oss.c
+++ b/sound/core/oss/mixer_oss.c
@@ -328,7 +328,7 @@ static int snd_mixer_oss_set_volume(stru
pslot->volume[1] = right;
result = (left & 0xff) | ((right & 0xff) << 8);
unlock:
- mutex_lock(&mixer->reg_mutex);
+ mutex_unlock(&mixer->reg_mutex);
return result;
}
From: Takashi Iwai <[email protected]>
commit 411cef6adfb38a5bb6bd9af3941b28198e7fb680 upstream.
The OSS mixer can reassign the mapping slots dynamically via proc
file. Although the addition and deletion of those slots are protected
by mixer->reg_mutex, the access to slots aren't, hence this may cause
UAF when the slots in use are deleted concurrently.
This patch applies the mixer->reg_mutex in all appropriate code paths
(i.e. the ioctl functions) that may access slots.
Reported-by: [email protected]
Reviewed-by: Jaroslav Kysela <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/core/oss/mixer_oss.c | 43 +++++++++++++++++++++++++++++++++----------
1 file changed, 33 insertions(+), 10 deletions(-)
--- a/sound/core/oss/mixer_oss.c
+++ b/sound/core/oss/mixer_oss.c
@@ -145,11 +145,13 @@ static int snd_mixer_oss_devmask(struct
if (mixer == NULL)
return -EIO;
+ mutex_lock(&mixer->reg_mutex);
for (chn = 0; chn < 31; chn++) {
pslot = &mixer->slots[chn];
if (pslot->put_volume || pslot->put_recsrc)
result |= 1 << chn;
}
+ mutex_unlock(&mixer->reg_mutex);
return result;
}
@@ -161,11 +163,13 @@ static int snd_mixer_oss_stereodevs(stru
if (mixer == NULL)
return -EIO;
+ mutex_lock(&mixer->reg_mutex);
for (chn = 0; chn < 31; chn++) {
pslot = &mixer->slots[chn];
if (pslot->put_volume && pslot->stereo)
result |= 1 << chn;
}
+ mutex_unlock(&mixer->reg_mutex);
return result;
}
@@ -176,6 +180,7 @@ static int snd_mixer_oss_recmask(struct
if (mixer == NULL)
return -EIO;
+ mutex_lock(&mixer->reg_mutex);
if (mixer->put_recsrc && mixer->get_recsrc) { /* exclusive */
result = mixer->mask_recsrc;
} else {
@@ -187,6 +192,7 @@ static int snd_mixer_oss_recmask(struct
result |= 1 << chn;
}
}
+ mutex_unlock(&mixer->reg_mutex);
return result;
}
@@ -197,11 +203,12 @@ static int snd_mixer_oss_get_recsrc(stru
if (mixer == NULL)
return -EIO;
+ mutex_lock(&mixer->reg_mutex);
if (mixer->put_recsrc && mixer->get_recsrc) { /* exclusive */
- int err;
unsigned int index;
- if ((err = mixer->get_recsrc(fmixer, &index)) < 0)
- return err;
+ result = mixer->get_recsrc(fmixer, &index);
+ if (result < 0)
+ goto unlock;
result = 1 << index;
} else {
struct snd_mixer_oss_slot *pslot;
@@ -216,7 +223,10 @@ static int snd_mixer_oss_get_recsrc(stru
}
}
}
- return mixer->oss_recsrc = result;
+ mixer->oss_recsrc = result;
+ unlock:
+ mutex_unlock(&mixer->reg_mutex);
+ return result;
}
static int snd_mixer_oss_set_recsrc(struct snd_mixer_oss_file *fmixer, int recsrc)
@@ -229,6 +239,7 @@ static int snd_mixer_oss_set_recsrc(stru
if (mixer == NULL)
return -EIO;
+ mutex_lock(&mixer->reg_mutex);
if (mixer->get_recsrc && mixer->put_recsrc) { /* exclusive input */
if (recsrc & ~mixer->oss_recsrc)
recsrc &= ~mixer->oss_recsrc;
@@ -254,6 +265,7 @@ static int snd_mixer_oss_set_recsrc(stru
}
}
}
+ mutex_unlock(&mixer->reg_mutex);
return result;
}
@@ -265,6 +277,7 @@ static int snd_mixer_oss_get_volume(stru
if (mixer == NULL || slot > 30)
return -EIO;
+ mutex_lock(&mixer->reg_mutex);
pslot = &mixer->slots[slot];
left = pslot->volume[0];
right = pslot->volume[1];
@@ -272,15 +285,21 @@ static int snd_mixer_oss_get_volume(stru
result = pslot->get_volume(fmixer, pslot, &left, &right);
if (!pslot->stereo)
right = left;
- if (snd_BUG_ON(left < 0 || left > 100))
- return -EIO;
- if (snd_BUG_ON(right < 0 || right > 100))
- return -EIO;
+ if (snd_BUG_ON(left < 0 || left > 100)) {
+ result = -EIO;
+ goto unlock;
+ }
+ if (snd_BUG_ON(right < 0 || right > 100)) {
+ result = -EIO;
+ goto unlock;
+ }
if (result >= 0) {
pslot->volume[0] = left;
pslot->volume[1] = right;
result = (left & 0xff) | ((right & 0xff) << 8);
}
+ unlock:
+ mutex_unlock(&mixer->reg_mutex);
return result;
}
@@ -293,6 +312,7 @@ static int snd_mixer_oss_set_volume(stru
if (mixer == NULL || slot > 30)
return -EIO;
+ mutex_lock(&mixer->reg_mutex);
pslot = &mixer->slots[slot];
if (left > 100)
left = 100;
@@ -303,10 +323,13 @@ static int snd_mixer_oss_set_volume(stru
if (pslot->put_volume)
result = pslot->put_volume(fmixer, pslot, left, right);
if (result < 0)
- return result;
+ goto unlock;
pslot->volume[0] = left;
pslot->volume[1] = right;
- return (left & 0xff) | ((right & 0xff) << 8);
+ result = (left & 0xff) | ((right & 0xff) << 8);
+ unlock:
+ mutex_lock(&mixer->reg_mutex);
+ return result;
}
static int snd_mixer_oss_ioctl1(struct snd_mixer_oss_file *fmixer, unsigned int cmd, unsigned long arg)
From: Marek Behún <[email protected]>
commit e4313be1599d397625c14fb7826996813622decf upstream.
MSI domain callback .alloc() (implemented by advk_msi_irq_domain_alloc()
function) should return zero on success, since non-zero value indicates
failure.
When the driver was converted to generic MSI API in commit f21a8b1b6837
("PCI: aardvark: Move to MSI handling using generic MSI support"), it
was converted so that it returns hwirq number.
Fix this.
Link: https://lore.kernel.org/r/[email protected]
Fixes: f21a8b1b6837 ("PCI: aardvark: Move to MSI handling using generic MSI support")
Signed-off-by: Pali Rohár <[email protected]>
Signed-off-by: Marek Behún <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/host/pci-aardvark.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/pci/host/pci-aardvark.c
+++ b/drivers/pci/host/pci-aardvark.c
@@ -662,7 +662,7 @@ static int advk_msi_irq_domain_alloc(str
domain->host_data, handle_simple_irq,
NULL, NULL);
- return hwirq;
+ return 0;
}
static void advk_msi_irq_domain_free(struct irq_domain *domain,
From: Krzysztof Kozlowski <[email protected]>
commit a7fda04bc9b6ad9da8e19c9e6e3b1dab773d068a upstream.
The driver was always parsing "s5m8767,pmic-buck-default-dvs-idx", not
"s5m8767,pmic-buck234-default-dvs-idx".
Cc: <[email protected]>
Fixes: 26aec009f6b6 ("regulator: add device tree support for s5m8767")
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Acked-by: Rob Herring <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt
+++ b/Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt
@@ -39,7 +39,7 @@ Optional properties of the main device n
Additional properties required if either of the optional properties are used:
- - s5m8767,pmic-buck234-default-dvs-idx: Default voltage setting selected from
+ - s5m8767,pmic-buck-default-dvs-idx: Default voltage setting selected from
the possible 8 options selectable by the dvs gpios. The value of this
property should be between 0 and 7. If not specified or if out of range, the
default value of this property is set to 0.
From: Johan Hovold <[email protected]>
commit c1b9ca365deae667192be9fe24db244919971234 upstream.
Add the missing endpoint max-packet sanity check to probe() to avoid
division by zero in ath10k_usb_hif_tx_sg() in case a malicious device
has broken descriptors (or when doing descriptor fuzz testing).
Note that USB core will reject URBs submitted for endpoints with zero
wMaxPacketSize but that drivers doing packet-size calculations still
need to handle this (cf. commit 2548288b4fb0 ("USB: Fix: Don't skip
endpoint descriptors with maxpacket=0")).
Fixes: 9cbee358687e ("ath6kl: add full USB support")
Cc: [email protected] # 3.5
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/ath/ath6kl/usb.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/drivers/net/wireless/ath/ath6kl/usb.c
+++ b/drivers/net/wireless/ath/ath6kl/usb.c
@@ -340,6 +340,11 @@ static int ath6kl_usb_setup_pipe_resourc
le16_to_cpu(endpoint->wMaxPacketSize),
endpoint->bInterval);
}
+
+ /* Ignore broken descriptors. */
+ if (usb_endpoint_maxp(endpoint) == 0)
+ continue;
+
urbcount = 0;
pipe_num =
From: Johan Hovold <[email protected]>
commit a066d28a7e729f808a3e6eff22e70c003091544e upstream.
USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.
Fixes: 241b128b6b69 ("ath6kl: add back beginnings of USB support")
Cc: [email protected] # 3.4
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/ath/ath6kl/usb.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/wireless/ath/ath6kl/usb.c
+++ b/drivers/net/wireless/ath/ath6kl/usb.c
@@ -912,7 +912,7 @@ static int ath6kl_usb_submit_ctrl_in(str
req,
USB_DIR_IN | USB_TYPE_VENDOR |
USB_RECIP_DEVICE, value, index, buf,
- size, 2 * HZ);
+ size, 2000);
if (ret < 0) {
ath6kl_warn("Failed to read usb control message: %d\n", ret);
From: Johan Hovold <[email protected]>
commit 5286132324230168d3fab6ffc16bfd7de85bdfb4 upstream.
USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.
Fixes: 4db66499df91 ("ath10k: add initial USB support")
Cc: [email protected] # 4.14
Cc: Erik Stromdahl <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/ath/ath10k/usb.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/wireless/ath/ath10k/usb.c
+++ b/drivers/net/wireless/ath/ath10k/usb.c
@@ -536,7 +536,7 @@ static int ath10k_usb_submit_ctrl_in(str
req,
USB_DIR_IN | USB_TYPE_VENDOR |
USB_RECIP_DEVICE, value, index, buf,
- size, 2 * HZ);
+ size, 2000);
if (ret < 0) {
ath10k_warn(ar, "Failed to read usb control message: %d\n",
From: Johan Hovold <[email protected]>
commit 79a4479a17b83310deb0b1a2a274fe5be12d2318 upstream.
USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.
Use the common control-message timeout define for the five-second
timeout and drop the driver-specific one.
Fixes: 946b960d13c1 ("USB: add driver for iowarrior devices.")
Cc: [email protected] # 2.6.21
Signed-off-by: Johan Hovold <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/misc/iowarrior.c | 8 ++------
1 file changed, 2 insertions(+), 6 deletions(-)
--- a/drivers/usb/misc/iowarrior.c
+++ b/drivers/usb/misc/iowarrior.c
@@ -103,10 +103,6 @@ struct iowarrior {
/* globals */
/*--------------*/
-/*
- * USB spec identifies 5 second timeouts.
- */
-#define GET_TIMEOUT 5
#define USB_REQ_GET_REPORT 0x01
//#if 0
static int usb_get_report(struct usb_device *dev,
@@ -118,7 +114,7 @@ static int usb_get_report(struct usb_dev
USB_DIR_IN | USB_TYPE_CLASS |
USB_RECIP_INTERFACE, (type << 8) + id,
inter->desc.bInterfaceNumber, buf, size,
- GET_TIMEOUT*HZ);
+ USB_CTRL_GET_TIMEOUT);
}
//#endif
@@ -133,7 +129,7 @@ static int usb_set_report(struct usb_int
USB_TYPE_CLASS | USB_RECIP_INTERFACE,
(type << 8) + id,
intf->cur_altsetting->desc.bInterfaceNumber, buf,
- size, HZ);
+ size, 1000);
}
/*---------------------*/
From: Filipe Manana <[email protected]>
commit 10adb1152d957a4d570ad630f93a88bb961616c1 upstream.
At replay_dir_deletes(), if find_dir_range() returns an error we break out
of the main while loop and then assign a value of 0 (success) to the 'ret'
variable, resulting in completely ignoring that an error happened. Fix
that by jumping to the 'out' label when find_dir_range() returns an error
(negative value).
CC: [email protected] # 4.4+
Reviewed-by: Josef Bacik <[email protected]>
Signed-off-by: Filipe Manana <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/btrfs/tree-log.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/fs/btrfs/tree-log.c
+++ b/fs/btrfs/tree-log.c
@@ -2286,7 +2286,9 @@ again:
else {
ret = find_dir_range(log, path, dirid, key_type,
&range_start, &range_end);
- if (ret != 0)
+ if (ret < 0)
+ goto out;
+ else if (ret > 0)
break;
}
From: Jonas Dreßler <[email protected]>
[ Upstream commit c606008b70627a2fc485732a53cc22f0f66d0981 ]
When creating a new virtual interface in mwifiex_add_virtual_intf(), we
update our internal driver states like bss_type, bss_priority, bss_role
and bss_mode to reflect the mode the firmware will be set to.
When switching virtual interface mode using
mwifiex_init_new_priv_params() though, we currently only update bss_mode
and bss_role. In order for the interface mode switch to actually work,
we also need to update bss_type to its proper value, so do that.
This fixes a crash of the firmware (because the driver tries to execute
commands that are invalid in AP mode) when switching from station mode
to AP mode.
Signed-off-by: Jonas Dreßler <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/marvell/mwifiex/cfg80211.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/marvell/mwifiex/cfg80211.c b/drivers/net/wireless/marvell/mwifiex/cfg80211.c
index 7bdcbe79d963d..a88bddc383894 100644
--- a/drivers/net/wireless/marvell/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/marvell/mwifiex/cfg80211.c
@@ -898,16 +898,20 @@ mwifiex_init_new_priv_params(struct mwifiex_private *priv,
switch (type) {
case NL80211_IFTYPE_STATION:
case NL80211_IFTYPE_ADHOC:
- priv->bss_role = MWIFIEX_BSS_ROLE_STA;
+ priv->bss_role = MWIFIEX_BSS_ROLE_STA;
+ priv->bss_type = MWIFIEX_BSS_TYPE_STA;
break;
case NL80211_IFTYPE_P2P_CLIENT:
- priv->bss_role = MWIFIEX_BSS_ROLE_STA;
+ priv->bss_role = MWIFIEX_BSS_ROLE_STA;
+ priv->bss_type = MWIFIEX_BSS_TYPE_P2P;
break;
case NL80211_IFTYPE_P2P_GO:
- priv->bss_role = MWIFIEX_BSS_ROLE_UAP;
+ priv->bss_role = MWIFIEX_BSS_ROLE_UAP;
+ priv->bss_type = MWIFIEX_BSS_TYPE_P2P;
break;
case NL80211_IFTYPE_AP:
priv->bss_role = MWIFIEX_BSS_ROLE_UAP;
+ priv->bss_type = MWIFIEX_BSS_TYPE_UAP;
break;
default:
mwifiex_dbg(adapter, ERROR,
--
2.33.0
From: Zheyu Ma <[email protected]>
[ Upstream commit dbb4cfea6efe979ed153bd59a6a527a90d3d0ab3 ]
The interrupt handling should be related to the firmware version. If
the driver matches an old firmware, then the driver should not handle
interrupt such as i2c or dma, otherwise it will cause some errors.
This log reveals it:
[ 27.708641] INFO: trying to register non-static key.
[ 27.710851] The code is fine but needs lockdep annotation, or maybe
[ 27.712010] you didn't initialize this object before use?
[ 27.712396] turning off the locking correctness validator.
[ 27.712787] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 5.12.4-g70e7f0549188-dirty #169
[ 27.713349] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
[ 27.714149] Call Trace:
[ 27.714329] <IRQ>
[ 27.714480] dump_stack+0xba/0xf5
[ 27.714737] register_lock_class+0x873/0x8f0
[ 27.715052] ? __lock_acquire+0x323/0x1930
[ 27.715353] __lock_acquire+0x75/0x1930
[ 27.715636] lock_acquire+0x1dd/0x3e0
[ 27.715905] ? netup_i2c_interrupt+0x19/0x310
[ 27.716226] _raw_spin_lock_irqsave+0x4b/0x60
[ 27.716544] ? netup_i2c_interrupt+0x19/0x310
[ 27.716863] netup_i2c_interrupt+0x19/0x310
[ 27.717178] netup_unidvb_isr+0xd3/0x160
[ 27.717467] __handle_irq_event_percpu+0x53/0x3e0
[ 27.717808] handle_irq_event_percpu+0x35/0x90
[ 27.718129] handle_irq_event+0x39/0x60
[ 27.718409] handle_fasteoi_irq+0xc2/0x1d0
[ 27.718707] __common_interrupt+0x7f/0x150
[ 27.719008] common_interrupt+0xb4/0xd0
[ 27.719289] </IRQ>
[ 27.719446] asm_common_interrupt+0x1e/0x40
[ 27.719747] RIP: 0010:native_safe_halt+0x17/0x20
[ 27.720084] Code: 07 0f 00 2d 8b ee 4c 00 f4 5d c3 0f 1f 84 00 00 00 00 00 8b 05 72 95 17 02 55 48 89 e5 85 c0 7e 07 0f 00 2d 6b ee 4c 00 fb f4 <5d> c3 cc cc cc cc cc cc cc 55 48 89 e5 e8 67 53 ff ff 8b 0d 29 f6
[ 27.721386] RSP: 0018:ffffc9000008fe90 EFLAGS: 00000246
[ 27.721758] RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000000
[ 27.722262] RDX: 0000000000000000 RSI: ffffffff85f7c054 RDI: ffffffff85ded4e6
[ 27.722770] RBP: ffffc9000008fe90 R08: 0000000000000001 R09: 0000000000000001
[ 27.723277] R10: 0000000000000000 R11: 0000000000000001 R12: ffffffff86a75408
[ 27.723781] R13: 0000000000000000 R14: 0000000000000000 R15: ffff888100260000
[ 27.724289] default_idle+0x9/0x10
[ 27.724537] arch_cpu_idle+0xa/0x10
[ 27.724791] default_idle_call+0x6e/0x250
[ 27.725082] do_idle+0x1f0/0x2d0
[ 27.725326] cpu_startup_entry+0x18/0x20
[ 27.725613] start_secondary+0x11f/0x160
[ 27.725902] secondary_startup_64_no_verify+0xb0/0xbb
[ 27.726272] BUG: kernel NULL pointer dereference, address: 0000000000000002
[ 27.726768] #PF: supervisor read access in kernel mode
[ 27.727138] #PF: error_code(0x0000) - not-present page
[ 27.727507] PGD 8000000118688067 P4D 8000000118688067 PUD 10feab067 PMD 0
[ 27.727999] Oops: 0000 [#1] PREEMPT SMP PTI
[ 27.728302] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 5.12.4-g70e7f0549188-dirty #169
[ 27.728861] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
[ 27.729660] RIP: 0010:netup_i2c_interrupt+0x23/0x310
[ 27.730019] Code: 0f 1f 80 00 00 00 00 55 48 89 e5 41 55 41 54 53 48 89 fb e8 af 6e 95 fd 48 89 df e8 e7 9f 1c 01 49 89 c5 48 8b 83 48 08 00 00 <66> 44 8b 60 02 44 89 e0 48 8b 93 48 08 00 00 83 e0 f8 66 89 42 02
[ 27.731339] RSP: 0018:ffffc90000118e90 EFLAGS: 00010046
[ 27.731716] RAX: 0000000000000000 RBX: ffff88810803c4d8 RCX: 0000000000000000
[ 27.732223] RDX: 0000000000000001 RSI: ffffffff85d37b94 RDI: ffff88810803c4d8
[ 27.732727] RBP: ffffc90000118ea8 R08: 0000000000000000 R09: 0000000000000001
[ 27.733239] R10: ffff88810803c4f0 R11: 61646e6f63657320 R12: 0000000000000000
[ 27.733745] R13: 0000000000000046 R14: ffff888101041000 R15: ffff8881081b2400
[ 27.734251] FS: 0000000000000000(0000) GS:ffff88817bc80000(0000) knlGS:0000000000000000
[ 27.734821] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 27.735228] CR2: 0000000000000002 CR3: 0000000108194000 CR4: 00000000000006e0
[ 27.735735] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 27.736241] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 27.736744] Call Trace:
[ 27.736924] <IRQ>
[ 27.737074] netup_unidvb_isr+0xd3/0x160
[ 27.737363] __handle_irq_event_percpu+0x53/0x3e0
[ 27.737706] handle_irq_event_percpu+0x35/0x90
[ 27.738028] handle_irq_event+0x39/0x60
[ 27.738306] handle_fasteoi_irq+0xc2/0x1d0
[ 27.738602] __common_interrupt+0x7f/0x150
[ 27.738899] common_interrupt+0xb4/0xd0
[ 27.739176] </IRQ>
[ 27.739331] asm_common_interrupt+0x1e/0x40
[ 27.739633] RIP: 0010:native_safe_halt+0x17/0x20
[ 27.739967] Code: 07 0f 00 2d 8b ee 4c 00 f4 5d c3 0f 1f 84 00 00 00 00 00 8b 05 72 95 17 02 55 48 89 e5 85 c0 7e 07 0f 00 2d 6b ee 4c 00 fb f4 <5d> c3 cc cc cc cc cc cc cc 55 48 89 e5 e8 67 53 ff ff 8b 0d 29 f6
[ 27.741275] RSP: 0018:ffffc9000008fe90 EFLAGS: 00000246
[ 27.741647] RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000000
[ 27.742148] RDX: 0000000000000000 RSI: ffffffff85f7c054 RDI: ffffffff85ded4e6
[ 27.742652] RBP: ffffc9000008fe90 R08: 0000000000000001 R09: 0000000000000001
[ 27.743154] R10: 0000000000000000 R11: 0000000000000001 R12: ffffffff86a75408
[ 27.743652] R13: 0000000000000000 R14: 0000000000000000 R15: ffff888100260000
[ 27.744157] default_idle+0x9/0x10
[ 27.744405] arch_cpu_idle+0xa/0x10
[ 27.744658] default_idle_call+0x6e/0x250
[ 27.744948] do_idle+0x1f0/0x2d0
[ 27.745190] cpu_startup_entry+0x18/0x20
[ 27.745475] start_secondary+0x11f/0x160
[ 27.745761] secondary_startup_64_no_verify+0xb0/0xbb
[ 27.746123] Modules linked in:
[ 27.746348] Dumping ftrace buffer:
[ 27.746596] (ftrace buffer empty)
[ 27.746852] CR2: 0000000000000002
[ 27.747094] ---[ end trace ebafd46f83ab946d ]---
[ 27.747424] RIP: 0010:netup_i2c_interrupt+0x23/0x310
[ 27.747778] Code: 0f 1f 80 00 00 00 00 55 48 89 e5 41 55 41 54 53 48 89 fb e8 af 6e 95 fd 48 89 df e8 e7 9f 1c 01 49 89 c5 48 8b 83 48 08 00 00 <66> 44 8b 60 02 44 89 e0 48 8b 93 48 08 00 00 83 e0 f8 66 89 42 02
[ 27.749082] RSP: 0018:ffffc90000118e90 EFLAGS: 00010046
[ 27.749461] RAX: 0000000000000000 RBX: ffff88810803c4d8 RCX: 0000000000000000
[ 27.749966] RDX: 0000000000000001 RSI: ffffffff85d37b94 RDI: ffff88810803c4d8
[ 27.750471] RBP: ffffc90000118ea8 R08: 0000000000000000 R09: 0000000000000001
[ 27.750976] R10: ffff88810803c4f0 R11: 61646e6f63657320 R12: 0000000000000000
[ 27.751480] R13: 0000000000000046 R14: ffff888101041000 R15: ffff8881081b2400
[ 27.751986] FS: 0000000000000000(0000) GS:ffff88817bc80000(0000) knlGS:0000000000000000
[ 27.752560] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 27.752970] CR2: 0000000000000002 CR3: 0000000108194000 CR4: 00000000000006e0
[ 27.753481] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 27.753984] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 27.754487] Kernel panic - not syncing: Fatal exception in interrupt
[ 27.755033] Dumping ftrace buffer:
[ 27.755279] (ftrace buffer empty)
[ 27.755534] Kernel Offset: disabled
[ 27.755785] Rebooting in 1 seconds..
Signed-off-by: Zheyu Ma <[email protected]>
Signed-off-by: Sean Young <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../pci/netup_unidvb/netup_unidvb_core.c | 27 +++++++++++--------
1 file changed, 16 insertions(+), 11 deletions(-)
diff --git a/drivers/media/pci/netup_unidvb/netup_unidvb_core.c b/drivers/media/pci/netup_unidvb/netup_unidvb_core.c
index 60e6cd5b3a032..03239fba87bf2 100644
--- a/drivers/media/pci/netup_unidvb/netup_unidvb_core.c
+++ b/drivers/media/pci/netup_unidvb/netup_unidvb_core.c
@@ -267,19 +267,24 @@ static irqreturn_t netup_unidvb_isr(int irq, void *dev_id)
if ((reg40 & AVL_IRQ_ASSERTED) != 0) {
/* IRQ is being signaled */
reg_isr = readw(ndev->bmmio0 + REG_ISR);
- if (reg_isr & NETUP_UNIDVB_IRQ_I2C0) {
- iret = netup_i2c_interrupt(&ndev->i2c[0]);
- } else if (reg_isr & NETUP_UNIDVB_IRQ_I2C1) {
- iret = netup_i2c_interrupt(&ndev->i2c[1]);
- } else if (reg_isr & NETUP_UNIDVB_IRQ_SPI) {
+ if (reg_isr & NETUP_UNIDVB_IRQ_SPI)
iret = netup_spi_interrupt(ndev->spi);
- } else if (reg_isr & NETUP_UNIDVB_IRQ_DMA1) {
- iret = netup_dma_interrupt(&ndev->dma[0]);
- } else if (reg_isr & NETUP_UNIDVB_IRQ_DMA2) {
- iret = netup_dma_interrupt(&ndev->dma[1]);
- } else if (reg_isr & NETUP_UNIDVB_IRQ_CI) {
- iret = netup_ci_interrupt(ndev);
+ else if (!ndev->old_fw) {
+ if (reg_isr & NETUP_UNIDVB_IRQ_I2C0) {
+ iret = netup_i2c_interrupt(&ndev->i2c[0]);
+ } else if (reg_isr & NETUP_UNIDVB_IRQ_I2C1) {
+ iret = netup_i2c_interrupt(&ndev->i2c[1]);
+ } else if (reg_isr & NETUP_UNIDVB_IRQ_DMA1) {
+ iret = netup_dma_interrupt(&ndev->dma[0]);
+ } else if (reg_isr & NETUP_UNIDVB_IRQ_DMA2) {
+ iret = netup_dma_interrupt(&ndev->dma[1]);
+ } else if (reg_isr & NETUP_UNIDVB_IRQ_CI) {
+ iret = netup_ci_interrupt(ndev);
+ } else {
+ goto err;
+ }
} else {
+err:
dev_err(&pci_dev->dev,
"%s(): unknown interrupt 0x%x\n",
__func__, reg_isr);
--
2.33.0
From: Jonas Dreßler <[email protected]>
[ Upstream commit c2e9666cdffd347460a2b17988db4cfaf2a68fb9 ]
We currently handle changing from the P2P to the STATION virtual
interface type slightly different than changing from P2P to ADHOC: When
changing to STATION, we don't send the SET_BSS_MODE command. We do send
that command on all other type-changes though, and it probably makes
sense to send the command since after all we just changed our BSS_MODE.
Looking at prior changes to this part of the code, it seems that this is
simply a leftover from old refactorings.
Since sending the SET_BSS_MODE command is the only difference between
mwifiex_change_vif_to_sta_adhoc() and the current code, we can now use
mwifiex_change_vif_to_sta_adhoc() for both switching to ADHOC and
STATION interface type.
This does not fix any particular bug and just "looked right", so there's
a small chance it might be a regression.
Signed-off-by: Jonas Dreßler <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
.../net/wireless/marvell/mwifiex/cfg80211.c | 22 ++++---------------
1 file changed, 4 insertions(+), 18 deletions(-)
diff --git a/drivers/net/wireless/marvell/mwifiex/cfg80211.c b/drivers/net/wireless/marvell/mwifiex/cfg80211.c
index 79c50aebffc4b..7bdcbe79d963d 100644
--- a/drivers/net/wireless/marvell/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/marvell/mwifiex/cfg80211.c
@@ -1217,29 +1217,15 @@ mwifiex_cfg80211_change_virtual_intf(struct wiphy *wiphy,
break;
case NL80211_IFTYPE_P2P_CLIENT:
case NL80211_IFTYPE_P2P_GO:
+ if (mwifiex_cfg80211_deinit_p2p(priv))
+ return -EFAULT;
+
switch (type) {
- case NL80211_IFTYPE_STATION:
- if (mwifiex_cfg80211_deinit_p2p(priv))
- return -EFAULT;
- priv->adapter->curr_iface_comb.p2p_intf--;
- priv->adapter->curr_iface_comb.sta_intf++;
- dev->ieee80211_ptr->iftype = type;
- if (mwifiex_deinit_priv_params(priv))
- return -1;
- if (mwifiex_init_new_priv_params(priv, dev, type))
- return -1;
- if (mwifiex_sta_init_cmd(priv, false, false))
- return -1;
- break;
case NL80211_IFTYPE_ADHOC:
- if (mwifiex_cfg80211_deinit_p2p(priv))
- return -EFAULT;
+ case NL80211_IFTYPE_STATION:
return mwifiex_change_vif_to_sta_adhoc(dev, curr_iftype,
type, params);
- break;
case NL80211_IFTYPE_AP:
- if (mwifiex_cfg80211_deinit_p2p(priv))
- return -EFAULT;
return mwifiex_change_vif_to_ap(dev, curr_iftype, type,
params);
case NL80211_IFTYPE_UNSPECIFIED:
--
2.33.0
From: Ricardo Ribalda <[email protected]>
[ Upstream commit 97a2777a96070afb7da5d587834086c0b586c8cc ]
Fixes v4l2-compliance:
Format ioctls (Input 0):
warn: v4l2-test-formats.cpp(1339): S_PARM is supported but doesn't report V4L2_CAP_TIMEPERFRAME
fail: v4l2-test-formats.cpp(1241): node->has_frmintervals && !cap->capability
Reviewed-by: Hans Verkuil <[email protected]>
Signed-off-by: Ricardo Ribalda <[email protected]>
Signed-off-by: Laurent Pinchart <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/usb/uvc/uvc_v4l2.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/media/usb/uvc/uvc_v4l2.c b/drivers/media/usb/uvc/uvc_v4l2.c
index fae811b9cde96..2b0ca32d71965 100644
--- a/drivers/media/usb/uvc/uvc_v4l2.c
+++ b/drivers/media/usb/uvc/uvc_v4l2.c
@@ -446,10 +446,13 @@ static int uvc_v4l2_set_streamparm(struct uvc_streaming *stream,
uvc_simplify_fraction(&timeperframe.numerator,
&timeperframe.denominator, 8, 333);
- if (parm->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ if (parm->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) {
parm->parm.capture.timeperframe = timeperframe;
- else
+ parm->parm.capture.capability = V4L2_CAP_TIMEPERFRAME;
+ } else {
parm->parm.output.timeperframe = timeperframe;
+ parm->parm.output.capability = V4L2_CAP_TIMEPERFRAME;
+ }
return 0;
}
--
2.33.0
From: Dirk Bender <[email protected]>
[ Upstream commit 0961ba6dd211a4a52d1dd4c2d59be60ac2dc08c7 ]
To prevent corrupted frames after starting and stopping the sensor its
datasheet specifies a specific pause sequence to follow:
Stopping:
Set Pause_Restart Bit -> Set Restart Bit -> Set Chip_Enable Off
Restarting:
Set Chip_Enable On -> Clear Pause_Restart Bit
The Restart Bit is cleared automatically and must not be cleared
manually as this would cause undefined behavior.
Signed-off-by: Dirk Bender <[email protected]>
Signed-off-by: Stefan Riedmueller <[email protected]>
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/i2c/mt9p031.c | 28 +++++++++++++++++++++++++++-
1 file changed, 27 insertions(+), 1 deletion(-)
diff --git a/drivers/media/i2c/mt9p031.c b/drivers/media/i2c/mt9p031.c
index 91d822fc4443a..8e6ad6a6e68cb 100644
--- a/drivers/media/i2c/mt9p031.c
+++ b/drivers/media/i2c/mt9p031.c
@@ -81,7 +81,9 @@
#define MT9P031_PIXEL_CLOCK_INVERT (1 << 15)
#define MT9P031_PIXEL_CLOCK_SHIFT(n) ((n) << 8)
#define MT9P031_PIXEL_CLOCK_DIVIDE(n) ((n) << 0)
-#define MT9P031_FRAME_RESTART 0x0b
+#define MT9P031_RESTART 0x0b
+#define MT9P031_FRAME_PAUSE_RESTART (1 << 1)
+#define MT9P031_FRAME_RESTART (1 << 0)
#define MT9P031_SHUTTER_DELAY 0x0c
#define MT9P031_RST 0x0d
#define MT9P031_RST_ENABLE 1
@@ -448,9 +450,23 @@ static int mt9p031_set_params(struct mt9p031 *mt9p031)
static int mt9p031_s_stream(struct v4l2_subdev *subdev, int enable)
{
struct mt9p031 *mt9p031 = to_mt9p031(subdev);
+ struct i2c_client *client = v4l2_get_subdevdata(subdev);
+ int val;
int ret;
if (!enable) {
+ /* enable pause restart */
+ val = MT9P031_FRAME_PAUSE_RESTART;
+ ret = mt9p031_write(client, MT9P031_RESTART, val);
+ if (ret < 0)
+ return ret;
+
+ /* enable restart + keep pause restart set */
+ val |= MT9P031_FRAME_RESTART;
+ ret = mt9p031_write(client, MT9P031_RESTART, val);
+ if (ret < 0)
+ return ret;
+
/* Stop sensor readout */
ret = mt9p031_set_output_control(mt9p031,
MT9P031_OUTPUT_CONTROL_CEN, 0);
@@ -470,6 +486,16 @@ static int mt9p031_s_stream(struct v4l2_subdev *subdev, int enable)
if (ret < 0)
return ret;
+ /*
+ * - clear pause restart
+ * - don't clear restart as clearing restart manually can cause
+ * undefined behavior
+ */
+ val = MT9P031_FRAME_RESTART;
+ ret = mt9p031_write(client, MT9P031_RESTART, val);
+ if (ret < 0)
+ return ret;
+
return mt9p031_pll_enable(mt9p031);
}
--
2.33.0
From: Nadezda Lutovinova <[email protected]>
[ Upstream commit cdfaf4752e6915a4b455ad4400133e540e4dc965 ]
If of_device_get_match_data() return NULL,
then null pointer dereference occurs in s5p_mfc_init_pm().
The patch adds checking if dev->variant is NULL.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Nadezda Lutovinova <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/platform/s5p-mfc/s5p_mfc.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc.c b/drivers/media/platform/s5p-mfc/s5p_mfc.c
index 63d46fae9b289..75be40608bae8 100644
--- a/drivers/media/platform/s5p-mfc/s5p_mfc.c
+++ b/drivers/media/platform/s5p-mfc/s5p_mfc.c
@@ -1285,6 +1285,10 @@ static int s5p_mfc_probe(struct platform_device *pdev)
}
dev->variant = of_device_get_match_data(&pdev->dev);
+ if (!dev->variant) {
+ dev_err(&pdev->dev, "Failed to get device MFC hardware variant information\n");
+ return -ENOENT;
+ }
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
dev->regs_base = devm_ioremap_resource(&pdev->dev, res);
--
2.33.0
From: Marek Behún <[email protected]>
commit 95997723b6402cd6c53e0f9e7ac640ec64eaaff8 upstream.
The PCIE_MSI_PAYLOAD_REG contains 16-bit MSI number, not only lower
8 bits. Fix reading content of this register and add a comment
describing the access to this register.
Link: https://lore.kernel.org/r/[email protected]
Fixes: 8c39d710363c ("PCI: aardvark: Add Aardvark PCI host controller driver")
Signed-off-by: Pali Rohár <[email protected]>
Signed-off-by: Marek Behún <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/host/pci-aardvark.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
--- a/drivers/pci/host/pci-aardvark.c
+++ b/drivers/pci/host/pci-aardvark.c
@@ -112,6 +112,7 @@
#define PCIE_MSI_STATUS_REG (CONTROL_BASE_ADDR + 0x58)
#define PCIE_MSI_MASK_REG (CONTROL_BASE_ADDR + 0x5C)
#define PCIE_MSI_PAYLOAD_REG (CONTROL_BASE_ADDR + 0x9C)
+#define PCIE_MSI_DATA_MASK GENMASK(15, 0)
/* PCIe window configuration */
#define OB_WIN_BASE_ADDR 0x4c00
@@ -840,8 +841,12 @@ static void advk_pcie_handle_msi(struct
if (!(BIT(msi_idx) & msi_status))
continue;
+ /*
+ * msi_idx contains bits [4:0] of the msi_data and msi_data
+ * contains 16bit MSI interrupt number
+ */
advk_writel(pcie, BIT(msi_idx), PCIE_MSI_STATUS_REG);
- msi_data = advk_readl(pcie, PCIE_MSI_PAYLOAD_REG) & 0xFF;
+ msi_data = advk_readl(pcie, PCIE_MSI_PAYLOAD_REG) & PCIE_MSI_DATA_MASK;
generic_handle_irq(msi_data);
}
From: Zhang Yi <[email protected]>
commit d0e36a62bd4c60c09acc40e06ba4831a4d0bc75b upstream.
Fix the error path in free_dqentry(), pass out the error number if the
block to free is not correct.
Fixes: 1ccd14b9c271 ("quota: Split off quota tree handling into a separate file")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Zhang Yi <[email protected]>
Cc: [email protected]
Signed-off-by: Jan Kara <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/quota/quota_tree.c | 1 +
1 file changed, 1 insertion(+)
--- a/fs/quota/quota_tree.c
+++ b/fs/quota/quota_tree.c
@@ -422,6 +422,7 @@ static int free_dqentry(struct qtree_mem
quota_error(dquot->dq_sb, "Quota structure has offset to "
"other block (%u) than it should (%u)", blk,
(uint)(dquot->dq_off >> info->dqi_blocksize_bits));
+ ret = -EIO;
goto out_buf;
}
ret = read_blk(info, blk, buf);
From: Eric Badger <[email protected]>
commit 537bddd069c743759addf422d0b8f028ff0f8dbc upstream.
The computation of TOHM is off by one bit. This missed bit results in
too low a value for TOHM, which can cause errors in regular memory to
incorrectly report:
EDAC MC0: 1 CE Error at MMIOH area, on addr 0x000000207fffa680 on any memory
Fixes: 50d1bb93672f ("sb_edac: add support for Haswell based systems")
Cc: [email protected]
Reported-by: Meeta Saggi <[email protected]>
Signed-off-by: Eric Badger <[email protected]>
Signed-off-by: Tony Luck <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/edac/sb_edac.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/edac/sb_edac.c
+++ b/drivers/edac/sb_edac.c
@@ -1014,7 +1014,7 @@ static u64 haswell_get_tohm(struct sbrid
pci_read_config_dword(pvt->info.pci_vtd, HASWELL_TOHM_1, ®);
rc = ((reg << 6) | rc) << 26;
- return rc | 0x1ffffff;
+ return rc | 0x3ffffff;
}
static u64 knl_get_tolm(struct sbridge_pvt *pvt)
From: Johan Hovold <[email protected]>
commit 89f8765a11d8df49296d92c404067f9b5c58ee26 upstream.
Add the missing endpoint sanity checks to probe() to avoid division by
zero in mwifiex_write_data_sync() in case a malicious device has broken
descriptors (or when doing descriptor fuzz testing).
Only add checks for the firmware-download boot stage, which require both
command endpoints, for now. The driver looks like it will handle a
missing endpoint during normal operation without oopsing, albeit not
very gracefully as it will try to submit URBs to the default pipe and
fail.
Note that USB core will reject URBs submitted for endpoints with zero
wMaxPacketSize but that drivers doing packet-size calculations still
need to handle this (cf. commit 2548288b4fb0 ("USB: Fix: Don't skip
endpoint descriptors with maxpacket=0")).
Fixes: 4daffe354366 ("mwifiex: add support for Marvell USB8797 chipset")
Cc: [email protected] # 3.5
Cc: Amitkumar Karwar <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Reviewed-by: Brian Norris <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/marvell/mwifiex/usb.c | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
--- a/drivers/net/wireless/marvell/mwifiex/usb.c
+++ b/drivers/net/wireless/marvell/mwifiex/usb.c
@@ -491,6 +491,22 @@ static int mwifiex_usb_probe(struct usb_
}
}
+ switch (card->usb_boot_state) {
+ case USB8XXX_FW_DNLD:
+ /* Reject broken descriptors. */
+ if (!card->rx_cmd_ep || !card->tx_cmd_ep)
+ return -ENODEV;
+ if (card->bulk_out_maxpktsize == 0)
+ return -ENODEV;
+ break;
+ case USB8XXX_FW_READY:
+ /* Assume the driver can handle missing endpoints for now. */
+ break;
+ default:
+ WARN_ON(1);
+ return -ENODEV;
+ }
+
usb_set_intfdata(intf, card);
ret = mwifiex_add_card(card, &card->fw_done, &usb_ops,
From: Pekka Korpinen <[email protected]>
commit 558df982d4ead9cac628153d0d7b60feae05ddc8 upstream.
On success i2c_master_send() returns the number of bytes written. The
call from iio_write_channel_info(), however, expects the return value to
be zero on success.
This bug causes incorrect consumption of the sysfs buffer in
iio_write_channel_info(). When writing more than two characters to
out_voltage0_raw, the ad5446 write handler is called multiple times
causing unexpected behavior.
Fixes: 3ec36a2cf0d5 ("iio:ad5446: Add support for I2C based DACs")
Signed-off-by: Pekka Korpinen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/iio/dac/ad5446.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
--- a/drivers/iio/dac/ad5446.c
+++ b/drivers/iio/dac/ad5446.c
@@ -510,8 +510,15 @@ static int ad5622_write(struct ad5446_st
{
struct i2c_client *client = to_i2c_client(st->dev);
__be16 data = cpu_to_be16(val);
+ int ret;
- return i2c_master_send(client, (char *)&data, sizeof(data));
+ ret = i2c_master_send(client, (char *)&data, sizeof(data));
+ if (ret < 0)
+ return ret;
+ if (ret != sizeof(data))
+ return -EIO;
+
+ return 0;
}
/**
From: Randy Dunlap <[email protected]>
[ Upstream commit c15b5fc054c3d6c97e953617605235c5cb8ce979 ]
When CONFIG_PRINTK is not set, the CMPXCHG_BUGCHECK() macro calls
_printk(), but _printk() is a static inline function, not available
as an extern.
Since the purpose of the macro is to print the BUGCHECK info,
make this config option depend on PRINTK.
Fixes multiple occurrences of this build error:
../include/linux/printk.h:208:5: error: static declaration of '_printk' follows non-static declaration
208 | int _printk(const char *s, ...)
| ^~~~~~~
In file included from ../arch/ia64/include/asm/cmpxchg.h:5,
../arch/ia64/include/uapi/asm/cmpxchg.h:146:28: note: previous declaration of '_printk' with type 'int(const char *, ...)'
146 | extern int _printk(const char *fmt, ...);
Cc: [email protected]
Cc: Andrew Morton <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: Chris Down <[email protected]>
Cc: Paul Gortmaker <[email protected]>
Cc: John Paul Adrian Glaubitz <[email protected]>
Signed-off-by: Randy Dunlap <[email protected]>
Signed-off-by: Petr Mladek <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/ia64/Kconfig.debug | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/ia64/Kconfig.debug b/arch/ia64/Kconfig.debug
index 677c409425df2..c27c13ca77f47 100644
--- a/arch/ia64/Kconfig.debug
+++ b/arch/ia64/Kconfig.debug
@@ -42,7 +42,7 @@ config DISABLE_VHPT
config IA64_DEBUG_CMPXCHG
bool "Turn on compare-and-exchange bug checking (slow!)"
- depends on DEBUG_KERNEL
+ depends on DEBUG_KERNEL && PRINTK
help
Selecting this option turns on bug checking for the IA-64
compare-and-exchange instructions. This is slow! Itaniums
--
2.33.0
From: Anant Thazhemadam <[email protected]>
[ Upstream commit 899a61a3305d49e8a712e9ab20d0db94bde5929f ]
In dibusb_read_eeprom_byte(), if dibusb_i2c_msg() fails, val gets
assigned an value that's not properly initialized.
Using kzalloc() in place of kmalloc() for the buffer fixes this issue,
as the val can now be set to 0 in the event dibusb_i2c_msg() fails.
Reported-by: [email protected]
Tested-by: [email protected]
Signed-off-by: Anant Thazhemadam <[email protected]>
Signed-off-by: Sean Young <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/usb/dvb-usb/dibusb-common.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/media/usb/dvb-usb/dibusb-common.c b/drivers/media/usb/dvb-usb/dibusb-common.c
index bcacb0f220282..3e45642ae186b 100644
--- a/drivers/media/usb/dvb-usb/dibusb-common.c
+++ b/drivers/media/usb/dvb-usb/dibusb-common.c
@@ -226,7 +226,7 @@ int dibusb_read_eeprom_byte(struct dvb_usb_device *d, u8 offs, u8 *val)
u8 *buf;
int rc;
- buf = kmalloc(2, GFP_KERNEL);
+ buf = kzalloc(2, GFP_KERNEL);
if (!buf)
return -ENOMEM;
--
2.33.0
From: Rajat Asthana <[email protected]>
[ Upstream commit 476db72e521983ecb847e4013b263072bb1110fc ]
Syzkaller reported a warning called "rcu detected stall in dummy_timer".
The error seems to be an error in mceusb_dev_recv(). In the case of
-EPROTO error, the routine immediately resubmits the URB. Instead it
should return without resubmitting URB.
Reported-by: [email protected]
Signed-off-by: Rajat Asthana <[email protected]>
Signed-off-by: Sean Young <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/rc/mceusb.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/media/rc/mceusb.c b/drivers/media/rc/mceusb.c
index bbbbfd697f9c4..035b2455b26aa 100644
--- a/drivers/media/rc/mceusb.c
+++ b/drivers/media/rc/mceusb.c
@@ -1080,6 +1080,7 @@ static void mceusb_dev_recv(struct urb *urb)
case -ECONNRESET:
case -ENOENT:
case -EILSEQ:
+ case -EPROTO:
case -ESHUTDOWN:
usb_unlink_urb(urb);
return;
--
2.33.0
From: Tuo Li <[email protected]>
[ Upstream commit 4b6012a7830b813799a7faf40daa02a837e0fd5b ]
kzalloc() is used to allocate memory for cd->detectors, and if it fails,
channel_detector_exit() behind the label fail will be called:
channel_detector_exit(dpd, cd);
In channel_detector_exit(), cd->detectors is dereferenced through:
struct pri_detector *de = cd->detectors[i];
To fix this possible null-pointer dereference, check cd->detectors before
the for loop to dereference cd->detectors.
Reported-by: TOTE Robot <[email protected]>
Signed-off-by: Tuo Li <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/dfs_pattern_detector.c | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/ath/dfs_pattern_detector.c b/drivers/net/wireless/ath/dfs_pattern_detector.c
index 78146607f16e8..acd85e5069346 100644
--- a/drivers/net/wireless/ath/dfs_pattern_detector.c
+++ b/drivers/net/wireless/ath/dfs_pattern_detector.c
@@ -182,10 +182,12 @@ static void channel_detector_exit(struct dfs_pattern_detector *dpd,
if (cd == NULL)
return;
list_del(&cd->head);
- for (i = 0; i < dpd->num_radar_types; i++) {
- struct pri_detector *de = cd->detectors[i];
- if (de != NULL)
- de->exit(de);
+ if (cd->detectors) {
+ for (i = 0; i < dpd->num_radar_types; i++) {
+ struct pri_detector *de = cd->detectors[i];
+ if (de != NULL)
+ de->exit(de);
+ }
}
kfree(cd->detectors);
kfree(cd);
--
2.33.0
From: André Almeida <[email protected]>
[ Upstream commit 2835f327bd1240508db2c89fe94a056faa53c49a ]
Some buggy firmware and/or brand new batteries can support a charge that's
slightly over the reported design capacity. In such cases, the kernel will
report to userspace that the charging state of the battery is "Unknown",
when in reality the battery charge is "Full", at least from the design
capacity point of view. Make the fallback condition accepts capacities
over the designed capacity so userspace knows that is full.
Signed-off-by: André Almeida <[email protected]>
Reviewed-by: Hans de Goede <[email protected]>
Reviewed-by: Sebastian Reichel <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/acpi/battery.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c
index 13e7b56e33aeb..30996effc491b 100644
--- a/drivers/acpi/battery.c
+++ b/drivers/acpi/battery.c
@@ -193,7 +193,7 @@ static int acpi_battery_is_charged(struct acpi_battery *battery)
return 1;
/* fallback to using design values for broken batteries */
- if (battery->design_capacity == battery->capacity_now)
+ if (battery->design_capacity <= battery->capacity_now)
return 1;
/* we don't do any sort of metric based on percentages */
--
2.33.0
From: Kees Cook <[email protected]>
[ Upstream commit cf2a85efdade117e2169d6e26641016cbbf03ef0 ]
For files that lack trailing newlines and match a leaking address (e.g.
wchan[1]), the leaking_addresses.pl report would run together with the
next line, making things look corrupted.
Unconditionally remove the newline on input, and write it back out on
output.
[1] https://lore.kernel.org/all/20210103142726.GC30643@xsang-OptiPlex-9020/
Signed-off-by: Kees Cook <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
scripts/leaking_addresses.pl | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/scripts/leaking_addresses.pl b/scripts/leaking_addresses.pl
index 2977371b29563..de5196c08943a 100755
--- a/scripts/leaking_addresses.pl
+++ b/scripts/leaking_addresses.pl
@@ -262,8 +262,9 @@ sub parse_file
open my $fh, "<", $file or return;
while ( <$fh> ) {
+ chomp;
if (may_leak_address($_)) {
- print $file . ': ' . $_;
+ printf("$file: $_\n");
}
}
close $fh;
--
2.33.0
From: Zheyu Ma <[email protected]>
[ Upstream commit 738216c1953e802aa9f930c5d15b8f9092c847ff ]
In r592_remove(), the driver will free dma after freeing the host, which
may cause a UAF bug.
The following log reveals it:
[ 45.361796 ] BUG: KASAN: use-after-free in r592_remove+0x269/0x350 [r592]
[ 45.364286 ] Call Trace:
[ 45.364472 ] dump_stack_lvl+0xa8/0xd1
[ 45.364751 ] print_address_description+0x87/0x3b0
[ 45.365137 ] kasan_report+0x172/0x1c0
[ 45.365415 ] ? r592_remove+0x269/0x350 [r592]
[ 45.365834 ] ? r592_remove+0x269/0x350 [r592]
[ 45.366168 ] __asan_report_load8_noabort+0x14/0x20
[ 45.366531 ] r592_remove+0x269/0x350 [r592]
[ 45.378785 ]
[ 45.378903 ] Allocated by task 4674:
[ 45.379162 ] ____kasan_kmalloc+0xb5/0xe0
[ 45.379455 ] __kasan_kmalloc+0x9/0x10
[ 45.379730 ] __kmalloc+0x150/0x280
[ 45.379984 ] memstick_alloc_host+0x2a/0x190
[ 45.380664 ]
[ 45.380781 ] Freed by task 5509:
[ 45.381014 ] kasan_set_track+0x3d/0x70
[ 45.381293 ] kasan_set_free_info+0x23/0x40
[ 45.381635 ] ____kasan_slab_free+0x10b/0x140
[ 45.381950 ] __kasan_slab_free+0x11/0x20
[ 45.382241 ] slab_free_freelist_hook+0x81/0x150
[ 45.382575 ] kfree+0x13e/0x290
[ 45.382805 ] memstick_free+0x1c/0x20
[ 45.383070 ] device_release+0x9c/0x1d0
[ 45.383349 ] kobject_put+0x2ef/0x4c0
[ 45.383616 ] put_device+0x1f/0x30
[ 45.383865 ] memstick_free_host+0x24/0x30
[ 45.384162 ] r592_remove+0x242/0x350 [r592]
[ 45.384473 ] pci_device_remove+0xa9/0x250
Signed-off-by: Zheyu Ma <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/memstick/host/r592.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/memstick/host/r592.c b/drivers/memstick/host/r592.c
index 2539984c1db1c..256634ec58b63 100644
--- a/drivers/memstick/host/r592.c
+++ b/drivers/memstick/host/r592.c
@@ -841,15 +841,15 @@ static void r592_remove(struct pci_dev *pdev)
}
memstick_remove_host(dev->host);
+ if (dev->dummy_dma_page)
+ dma_free_coherent(&pdev->dev, PAGE_SIZE, dev->dummy_dma_page,
+ dev->dummy_dma_page_physical_address);
+
free_irq(dev->irq, dev);
iounmap(dev->mmio);
pci_release_regions(pdev);
pci_disable_device(pdev);
memstick_free_host(dev->host);
-
- if (dev->dummy_dma_page)
- dma_free_coherent(&pdev->dev, PAGE_SIZE, dev->dummy_dma_page,
- dev->dummy_dma_page_physical_address);
}
#ifdef CONFIG_PM_SLEEP
--
2.33.0
From: Johan Hovold <[email protected]>
commit a006acb931317aad3a8dd41333ebb0453caf49b8 upstream.
Add the missing endpoint max-packet sanity check to probe() to avoid
division by zero in ath10k_usb_hif_tx_sg() in case a malicious device
has broken descriptors (or when doing descriptor fuzz testing).
Note that USB core will reject URBs submitted for endpoints with zero
wMaxPacketSize but that drivers doing packet-size calculations still
need to handle this (cf. commit 2548288b4fb0 ("USB: Fix: Don't skip
endpoint descriptors with maxpacket=0")).
Fixes: 4db66499df91 ("ath10k: add initial USB support")
Cc: [email protected] # 4.14
Cc: Erik Stromdahl <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/ath/ath10k/usb.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/drivers/net/wireless/ath/ath10k/usb.c
+++ b/drivers/net/wireless/ath/ath10k/usb.c
@@ -875,6 +875,11 @@ static int ath10k_usb_setup_pipe_resourc
le16_to_cpu(endpoint->wMaxPacketSize),
endpoint->bInterval);
}
+
+ /* Ignore broken descriptors. */
+ if (usb_endpoint_maxp(endpoint) == 0)
+ continue;
+
urbcount = 0;
pipe_num =
From: Lasse Collin <[email protected]>
[ Upstream commit 4f8d7abaa413c34da9d751289849dbfb7c977d05 ]
This might matter, for example, if the underlying type of enum xz_check
was a signed char. In such a case the validation wouldn't have caught an
unsupported header. I don't know if this problem can occur in the kernel
on any arch but it's still good to fix it because some people might copy
the XZ code to their own projects from Linux instead of the upstream
XZ Embedded repository.
This change may increase the code size by a few bytes. An alternative
would have been to use an unsigned int instead of enum xz_check but
using an enumeration looks cleaner.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Lasse Collin <[email protected]>
Signed-off-by: Gao Xiang <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
lib/xz/xz_dec_stream.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/lib/xz/xz_dec_stream.c b/lib/xz/xz_dec_stream.c
index ac809b1e64f78..9e5b9ab537fea 100644
--- a/lib/xz/xz_dec_stream.c
+++ b/lib/xz/xz_dec_stream.c
@@ -402,12 +402,12 @@ static enum xz_ret dec_stream_header(struct xz_dec *s)
* we will accept other check types too, but then the check won't
* be verified and a warning (XZ_UNSUPPORTED_CHECK) will be given.
*/
+ if (s->temp.buf[HEADER_MAGIC_SIZE + 1] > XZ_CHECK_MAX)
+ return XZ_OPTIONS_ERROR;
+
s->check_type = s->temp.buf[HEADER_MAGIC_SIZE + 1];
#ifdef XZ_DEC_ANY_CHECK
- if (s->check_type > XZ_CHECK_MAX)
- return XZ_OPTIONS_ERROR;
-
if (s->check_type > XZ_CHECK_CRC32)
return XZ_UNSUPPORTED_CHECK;
#else
--
2.33.0
From: Tuo Li <[email protected]>
[ Upstream commit 8515965e5e33f4feb56134348c95953f3eadfb26 ]
The variable pdev is assigned to dev->plat_dev, and dev->plat_dev is
checked in:
if (!dev->plat_dev)
This indicates both dev->plat_dev and pdev can be NULL. If so, the
function dev_err() is called to print error information.
dev_err(&pdev->dev, "No platform data specified\n");
However, &pdev->dev is an illegal address, and it is dereferenced in
dev_err().
To fix this possible null-pointer dereference, replace dev_err() with
mfc_err().
Reported-by: TOTE Robot <[email protected]>
Signed-off-by: Tuo Li <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/platform/s5p-mfc/s5p_mfc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc.c b/drivers/media/platform/s5p-mfc/s5p_mfc.c
index 9942932ecbf9c..63d46fae9b289 100644
--- a/drivers/media/platform/s5p-mfc/s5p_mfc.c
+++ b/drivers/media/platform/s5p-mfc/s5p_mfc.c
@@ -1280,7 +1280,7 @@ static int s5p_mfc_probe(struct platform_device *pdev)
spin_lock_init(&dev->condlock);
dev->plat_dev = pdev;
if (!dev->plat_dev) {
- dev_err(&pdev->dev, "No platform data specified\n");
+ mfc_err("No platform data specified\n");
return -ENODEV;
}
--
2.33.0
From: Steven Rostedt (VMware) <[email protected]>
[ Upstream commit 49d67e445742bbcb03106b735b2ab39f6e5c56bc ]
The tracefs file system is by default mounted such that only root user can
access it. But there are legitimate reasons to create a group and allow
those added to the group to have access to tracing. By changing the
permissions of the tracefs mount point to allow access, it will allow
group access to the tracefs directory.
There should not be any real reason to allow all access to the tracefs
directory as it contains sensitive information. Have the default
permission of directories being created not have any OTH (other) bits set,
such that an admin that wants to give permission to a group has to first
disable all OTH bits in the file system.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/tracefs/inode.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/fs/tracefs/inode.c b/fs/tracefs/inode.c
index bea8ad876bf9a..0c123c5e70e08 100644
--- a/fs/tracefs/inode.c
+++ b/fs/tracefs/inode.c
@@ -427,7 +427,8 @@ static struct dentry *__create_dir(const char *name, struct dentry *parent,
if (unlikely(!inode))
return failed_creating(dentry);
- inode->i_mode = S_IFDIR | S_IRWXU | S_IRUGO | S_IXUGO;
+ /* Do not set bits for OTH */
+ inode->i_mode = S_IFDIR | S_IRWXU | S_IRUSR| S_IRGRP | S_IXUSR | S_IXGRP;
inode->i_op = ops;
inode->i_fop = &simple_dir_operations;
--
2.33.0
From: Yang Yingliang <[email protected]>
commit c7892ae13e461ed20154321eb792e07ebe38f5b3 upstream.
I got memory leak as follows when doing fault injection test:
unreferenced object 0xffff888020a7a680 (size 64):
comm "i2c-mcp23018-41", pid 23090, jiffies 4295160544 (age 8.680s)
hex dump (first 32 bytes):
00 48 d3 1e 80 88 ff ff 00 1a 56 c1 ff ff ff ff .H........V.....
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<0000000083c79b35>] kmem_cache_alloc_trace+0x16d/0x360
[<0000000051803c95>] pinctrl_init_controller+0x6ed/0xb70
[<0000000064346707>] pinctrl_register+0x27/0x80
[<0000000029b0e186>] devm_pinctrl_register+0x5b/0xe0
[<00000000391f5a3e>] mcp23s08_probe_one+0x968/0x118a [pinctrl_mcp23s08]
[<000000006112c039>] mcp230xx_probe+0x266/0x560 [pinctrl_mcp23s08_i2c]
If pinctrl_claim_hogs() fails, the 'pindesc' allocated in pinctrl_register_one_pin()
need be freed.
Cc: [email protected]
Reported-by: Hulk Robot <[email protected]>
Fixes: 950b0d91dc10 ("pinctrl: core: Fix regression caused by delayed work for hogs")
Signed-off-by: Yang Yingliang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pinctrl/core.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/pinctrl/core.c
+++ b/drivers/pinctrl/core.c
@@ -2061,6 +2061,8 @@ int pinctrl_enable(struct pinctrl_dev *p
if (error) {
dev_err(pctldev->dev, "could not claim hogs: %i\n",
error);
+ pinctrl_free_pindescs(pctldev, pctldev->desc->pins,
+ pctldev->desc->npins);
mutex_destroy(&pctldev->mutex);
kfree(pctldev);
From: Zhang Yi <[email protected]>
commit 9bf3d20331295b1ecb81f4ed9ef358c51699a050 upstream.
The block number in the quota tree on disk should be smaller than the
v2_disk_dqinfo.dqi_blocks. If the quota file was corrupted, we may be
allocating an 'allocated' block and that would lead to a loop in a tree,
which will probably trigger oops later. This patch adds a check for the
block number in the quota tree to prevent such potential issue.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Zhang Yi <[email protected]>
Cc: [email protected]
Signed-off-by: Jan Kara <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/quota/quota_tree.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)
--- a/fs/quota/quota_tree.c
+++ b/fs/quota/quota_tree.c
@@ -487,6 +487,13 @@ static int remove_tree(struct qtree_mem_
goto out_buf;
}
newblk = le32_to_cpu(ref[get_index(info, dquot->dq_id, depth)]);
+ if (newblk < QT_TREEOFF || newblk >= info->dqi_blocks) {
+ quota_error(dquot->dq_sb, "Getting block too big (%u >= %u)",
+ newblk, info->dqi_blocks);
+ ret = -EUCLEAN;
+ goto out_buf;
+ }
+
if (depth == info->dqi_qtree_depth - 1) {
ret = free_dqentry(info, dquot, newblk);
newblk = 0;
@@ -586,6 +593,13 @@ static loff_t find_tree_dqentry(struct q
blk = le32_to_cpu(ref[get_index(info, dquot->dq_id, depth)]);
if (!blk) /* No reference? */
goto out_buf;
+ if (blk < QT_TREEOFF || blk >= info->dqi_blocks) {
+ quota_error(dquot->dq_sb, "Getting block too big (%u >= %u)",
+ blk, info->dqi_blocks);
+ ret = -EUCLEAN;
+ goto out_buf;
+ }
+
if (depth < info->dqi_qtree_depth - 1)
ret = find_tree_dqentry(info, dquot, blk, depth+1);
else
From: Rafael J. Wysocki <[email protected]>
[ Upstream commit d3c4b6f64ad356c0d9ddbcf73fa471e6a841cc5c ]
ACPICA commit 0762982923f95eb652cf7ded27356b247c9774de
During wakeup from system-wide sleep states, acpi_get_sleep_type_data()
is called and it tries to get memory from the slab allocator in order
to evaluate a control method, but if KFENCE is enabled in the kernel,
the memory allocation attempt causes an IRQ work to be queued and a
self-IPI to be sent to the CPU running the code which requires the
memory controller to be ready, so if that happens too early in the
wakeup path, it doesn't work.
Prevent that from taking place by calling acpi_get_sleep_type_data()
for S0 upfront, when preparing to enter a given sleep state, and
saving the data obtained by it for later use during system wakeup.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214271
Reported-by: Reik Keutterling <[email protected]>
Tested-by: Reik Keutterling <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/acpi/acpica/acglobal.h | 2 ++
drivers/acpi/acpica/hwesleep.c | 8 ++------
drivers/acpi/acpica/hwsleep.c | 11 ++++-------
drivers/acpi/acpica/hwxfsleep.c | 7 +++++++
4 files changed, 15 insertions(+), 13 deletions(-)
diff --git a/drivers/acpi/acpica/acglobal.h b/drivers/acpi/acpica/acglobal.h
index 95eed442703f2..2f4a3fee69e70 100644
--- a/drivers/acpi/acpica/acglobal.h
+++ b/drivers/acpi/acpica/acglobal.h
@@ -255,6 +255,8 @@ extern struct acpi_bit_register_info
ACPI_GLOBAL(u8, acpi_gbl_sleep_type_a);
ACPI_GLOBAL(u8, acpi_gbl_sleep_type_b);
+ACPI_GLOBAL(u8, acpi_gbl_sleep_type_a_s0);
+ACPI_GLOBAL(u8, acpi_gbl_sleep_type_b_s0);
/*****************************************************************************
*
diff --git a/drivers/acpi/acpica/hwesleep.c b/drivers/acpi/acpica/hwesleep.c
index 12626d021a9b5..7f8c57177819f 100644
--- a/drivers/acpi/acpica/hwesleep.c
+++ b/drivers/acpi/acpica/hwesleep.c
@@ -181,17 +181,13 @@ acpi_status acpi_hw_extended_sleep(u8 sleep_state)
acpi_status acpi_hw_extended_wake_prep(u8 sleep_state)
{
- acpi_status status;
u8 sleep_type_value;
ACPI_FUNCTION_TRACE(hw_extended_wake_prep);
- status = acpi_get_sleep_type_data(ACPI_STATE_S0,
- &acpi_gbl_sleep_type_a,
- &acpi_gbl_sleep_type_b);
- if (ACPI_SUCCESS(status)) {
+ if (acpi_gbl_sleep_type_a_s0 != ACPI_SLEEP_TYPE_INVALID) {
sleep_type_value =
- ((acpi_gbl_sleep_type_a << ACPI_X_SLEEP_TYPE_POSITION) &
+ ((acpi_gbl_sleep_type_a_s0 << ACPI_X_SLEEP_TYPE_POSITION) &
ACPI_X_SLEEP_TYPE_MASK);
(void)acpi_write((u64)(sleep_type_value | ACPI_X_SLEEP_ENABLE),
diff --git a/drivers/acpi/acpica/hwsleep.c b/drivers/acpi/acpica/hwsleep.c
index 1fe7387a00e67..2c54d08b20ca6 100644
--- a/drivers/acpi/acpica/hwsleep.c
+++ b/drivers/acpi/acpica/hwsleep.c
@@ -218,7 +218,7 @@ acpi_status acpi_hw_legacy_sleep(u8 sleep_state)
acpi_status acpi_hw_legacy_wake_prep(u8 sleep_state)
{
- acpi_status status;
+ acpi_status status = AE_OK;
struct acpi_bit_register_info *sleep_type_reg_info;
struct acpi_bit_register_info *sleep_enable_reg_info;
u32 pm1a_control;
@@ -231,10 +231,7 @@ acpi_status acpi_hw_legacy_wake_prep(u8 sleep_state)
* This is unclear from the ACPI Spec, but it is required
* by some machines.
*/
- status = acpi_get_sleep_type_data(ACPI_STATE_S0,
- &acpi_gbl_sleep_type_a,
- &acpi_gbl_sleep_type_b);
- if (ACPI_SUCCESS(status)) {
+ if (acpi_gbl_sleep_type_a_s0 != ACPI_SLEEP_TYPE_INVALID) {
sleep_type_reg_info =
acpi_hw_get_bit_register_info(ACPI_BITREG_SLEEP_TYPE);
sleep_enable_reg_info =
@@ -255,9 +252,9 @@ acpi_status acpi_hw_legacy_wake_prep(u8 sleep_state)
/* Insert the SLP_TYP bits */
- pm1a_control |= (acpi_gbl_sleep_type_a <<
+ pm1a_control |= (acpi_gbl_sleep_type_a_s0 <<
sleep_type_reg_info->bit_position);
- pm1b_control |= (acpi_gbl_sleep_type_b <<
+ pm1b_control |= (acpi_gbl_sleep_type_b_s0 <<
sleep_type_reg_info->bit_position);
/* Write the control registers and ignore any errors */
diff --git a/drivers/acpi/acpica/hwxfsleep.c b/drivers/acpi/acpica/hwxfsleep.c
index e5c095ca6083a..827c3242225d9 100644
--- a/drivers/acpi/acpica/hwxfsleep.c
+++ b/drivers/acpi/acpica/hwxfsleep.c
@@ -322,6 +322,13 @@ acpi_status acpi_enter_sleep_state_prep(u8 sleep_state)
return_ACPI_STATUS(status);
}
+ status = acpi_get_sleep_type_data(ACPI_STATE_S0,
+ &acpi_gbl_sleep_type_a_s0,
+ &acpi_gbl_sleep_type_b_s0);
+ if (ACPI_FAILURE(status)) {
+ acpi_gbl_sleep_type_a_s0 = ACPI_SLEEP_TYPE_INVALID;
+ }
+
/* Execute the _PTS method (Prepare To Sleep) */
arg_list.count = 1;
--
2.33.0
From: Kalesh Singh <[email protected]>
[ Upstream commit 7ce1bb83a14019f8c396d57ec704d19478747716 ]
If CONFIG_CFI_CLANG=y, attempting to read an event histogram will cause
the kernel to panic due to failed CFI check.
1. echo 'hist:keys=common_pid' >> events/sched/sched_switch/trigger
2. cat events/sched/sched_switch/hist
3. kernel panics on attempting to read hist
This happens because the sort() function expects a generic
int (*)(const void *, const void *) pointer for the compare function.
To prevent this CFI failure, change tracing map cmp_entries_* function
signatures to match this.
Also, fix the build error reported by the kernel test robot [1].
[1] https://lore.kernel.org/r/[email protected]/
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Kalesh Singh <[email protected]>
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/trace/tracing_map.c | 40 ++++++++++++++++++++++----------------
1 file changed, 23 insertions(+), 17 deletions(-)
diff --git a/kernel/trace/tracing_map.c b/kernel/trace/tracing_map.c
index 35b2ba07f3c6f..379db35838b64 100644
--- a/kernel/trace/tracing_map.c
+++ b/kernel/trace/tracing_map.c
@@ -703,29 +703,35 @@ int tracing_map_init(struct tracing_map *map)
return err;
}
-static int cmp_entries_dup(const struct tracing_map_sort_entry **a,
- const struct tracing_map_sort_entry **b)
+static int cmp_entries_dup(const void *A, const void *B)
{
+ const struct tracing_map_sort_entry *a, *b;
int ret = 0;
- if (memcmp((*a)->key, (*b)->key, (*a)->elt->map->key_size))
+ a = *(const struct tracing_map_sort_entry **)A;
+ b = *(const struct tracing_map_sort_entry **)B;
+
+ if (memcmp(a->key, b->key, a->elt->map->key_size))
ret = 1;
return ret;
}
-static int cmp_entries_sum(const struct tracing_map_sort_entry **a,
- const struct tracing_map_sort_entry **b)
+static int cmp_entries_sum(const void *A, const void *B)
{
const struct tracing_map_elt *elt_a, *elt_b;
+ const struct tracing_map_sort_entry *a, *b;
struct tracing_map_sort_key *sort_key;
struct tracing_map_field *field;
tracing_map_cmp_fn_t cmp_fn;
void *val_a, *val_b;
int ret = 0;
- elt_a = (*a)->elt;
- elt_b = (*b)->elt;
+ a = *(const struct tracing_map_sort_entry **)A;
+ b = *(const struct tracing_map_sort_entry **)B;
+
+ elt_a = a->elt;
+ elt_b = b->elt;
sort_key = &elt_a->map->sort_key;
@@ -742,18 +748,21 @@ static int cmp_entries_sum(const struct tracing_map_sort_entry **a,
return ret;
}
-static int cmp_entries_key(const struct tracing_map_sort_entry **a,
- const struct tracing_map_sort_entry **b)
+static int cmp_entries_key(const void *A, const void *B)
{
const struct tracing_map_elt *elt_a, *elt_b;
+ const struct tracing_map_sort_entry *a, *b;
struct tracing_map_sort_key *sort_key;
struct tracing_map_field *field;
tracing_map_cmp_fn_t cmp_fn;
void *val_a, *val_b;
int ret = 0;
- elt_a = (*a)->elt;
- elt_b = (*b)->elt;
+ a = *(const struct tracing_map_sort_entry **)A;
+ b = *(const struct tracing_map_sort_entry **)B;
+
+ elt_a = a->elt;
+ elt_b = b->elt;
sort_key = &elt_a->map->sort_key;
@@ -926,10 +935,8 @@ static void sort_secondary(struct tracing_map *map,
struct tracing_map_sort_key *primary_key,
struct tracing_map_sort_key *secondary_key)
{
- int (*primary_fn)(const struct tracing_map_sort_entry **,
- const struct tracing_map_sort_entry **);
- int (*secondary_fn)(const struct tracing_map_sort_entry **,
- const struct tracing_map_sort_entry **);
+ int (*primary_fn)(const void *, const void *);
+ int (*secondary_fn)(const void *, const void *);
unsigned i, start = 0, n_sub = 1;
if (is_key(map, primary_key->field_idx))
@@ -998,8 +1005,7 @@ int tracing_map_sort_entries(struct tracing_map *map,
unsigned int n_sort_keys,
struct tracing_map_sort_entry ***sort_entries)
{
- int (*cmp_entries_fn)(const struct tracing_map_sort_entry **,
- const struct tracing_map_sort_entry **);
+ int (*cmp_entries_fn)(const void *, const void *);
struct tracing_map_sort_entry *sort_entry, **entries;
int i, n_entries, ret;
--
2.33.0
From: Lasse Collin <[email protected]>
[ Upstream commit 83d3c4f22a36d005b55f44628f46cc0d319a75e8 ]
With valid files, the safety margin described in lib/decompress_unxz.c
ensures that these buffers cannot overlap. But if the uncompressed size
of the input is larger than the caller thought, which is possible when
the input file is invalid/corrupt, the buffers can overlap. Obviously
the result will then be garbage (and usually the decoder will return
an error too) but no other harm will happen when such an over-run occurs.
This change only affects uncompressed LZMA2 chunks and so this
should have no effect on performance.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Lasse Collin <[email protected]>
Signed-off-by: Gao Xiang <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
lib/decompress_unxz.c | 2 +-
lib/xz/xz_dec_lzma2.c | 21 +++++++++++++++++++--
2 files changed, 20 insertions(+), 3 deletions(-)
diff --git a/lib/decompress_unxz.c b/lib/decompress_unxz.c
index 25d59a95bd668..abea25310ac73 100644
--- a/lib/decompress_unxz.c
+++ b/lib/decompress_unxz.c
@@ -167,7 +167,7 @@
* memeq and memzero are not used much and any remotely sane implementation
* is fast enough. memcpy/memmove speed matters in multi-call mode, but
* the kernel image is decompressed in single-call mode, in which only
- * memcpy speed can matter and only if there is a lot of uncompressible data
+ * memmove speed can matter and only if there is a lot of uncompressible data
* (LZMA2 stores uncompressible chunks in uncompressed form). Thus, the
* functions below should just be kept small; it's probably not worth
* optimizing for speed.
diff --git a/lib/xz/xz_dec_lzma2.c b/lib/xz/xz_dec_lzma2.c
index 08c3c80499983..2c5197d6b944d 100644
--- a/lib/xz/xz_dec_lzma2.c
+++ b/lib/xz/xz_dec_lzma2.c
@@ -387,7 +387,14 @@ static void dict_uncompressed(struct dictionary *dict, struct xz_buf *b,
*left -= copy_size;
- memcpy(dict->buf + dict->pos, b->in + b->in_pos, copy_size);
+ /*
+ * If doing in-place decompression in single-call mode and the
+ * uncompressed size of the file is larger than the caller
+ * thought (i.e. it is invalid input!), the buffers below may
+ * overlap and cause undefined behavior with memcpy().
+ * With valid inputs memcpy() would be fine here.
+ */
+ memmove(dict->buf + dict->pos, b->in + b->in_pos, copy_size);
dict->pos += copy_size;
if (dict->full < dict->pos)
@@ -397,7 +404,11 @@ static void dict_uncompressed(struct dictionary *dict, struct xz_buf *b,
if (dict->pos == dict->end)
dict->pos = 0;
- memcpy(b->out + b->out_pos, b->in + b->in_pos,
+ /*
+ * Like above but for multi-call mode: use memmove()
+ * to avoid undefined behavior with invalid input.
+ */
+ memmove(b->out + b->out_pos, b->in + b->in_pos,
copy_size);
}
@@ -421,6 +432,12 @@ static uint32_t dict_flush(struct dictionary *dict, struct xz_buf *b)
if (dict->pos == dict->end)
dict->pos = 0;
+ /*
+ * These buffers cannot overlap even if doing in-place
+ * decompression because in multi-call mode dict->buf
+ * has been allocated by us in this file; it's not
+ * provided by the caller like in single-call mode.
+ */
memcpy(b->out + b->out_pos, dict->buf + dict->start,
copy_size);
}
--
2.33.0
From: Takashi Iwai <[email protected]>
[ Upstream commit 99c23da0eed4fd20cae8243f2b51e10e66aa0951 ]
The sco_send_frame() also takes lock_sock() during memcpy_from_msg()
call that may be endlessly blocked by a task with userfaultd
technique, and this will result in a hung task watchdog trigger.
Just like the similar fix for hci_sock_sendmsg() in commit
92c685dc5de0 ("Bluetooth: reorganize functions..."), this patch moves
the memcpy_from_msg() out of lock_sock() for addressing the hang.
This should be the last piece for fixing CVE-2021-3640 after a few
already queued fixes.
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/bluetooth/sco.c | 24 ++++++++++++++++--------
1 file changed, 16 insertions(+), 8 deletions(-)
diff --git a/net/bluetooth/sco.c b/net/bluetooth/sco.c
index f681e7ce89457..a5cc8942fc3f8 100644
--- a/net/bluetooth/sco.c
+++ b/net/bluetooth/sco.c
@@ -255,7 +255,8 @@ static int sco_connect(struct hci_dev *hdev, struct sock *sk)
return err;
}
-static int sco_send_frame(struct sock *sk, struct msghdr *msg, int len)
+static int sco_send_frame(struct sock *sk, void *buf, int len,
+ unsigned int msg_flags)
{
struct sco_conn *conn = sco_pi(sk)->conn;
struct sk_buff *skb;
@@ -267,15 +268,11 @@ static int sco_send_frame(struct sock *sk, struct msghdr *msg, int len)
BT_DBG("sk %p len %d", sk, len);
- skb = bt_skb_send_alloc(sk, len, msg->msg_flags & MSG_DONTWAIT, &err);
+ skb = bt_skb_send_alloc(sk, len, msg_flags & MSG_DONTWAIT, &err);
if (!skb)
return err;
- if (memcpy_from_msg(skb_put(skb, len), msg, len)) {
- kfree_skb(skb);
- return -EFAULT;
- }
-
+ memcpy(skb_put(skb, len), buf, len);
hci_send_sco(conn->hcon, skb);
return len;
@@ -692,6 +689,7 @@ static int sco_sock_sendmsg(struct socket *sock, struct msghdr *msg,
size_t len)
{
struct sock *sk = sock->sk;
+ void *buf;
int err;
BT_DBG("sock %p, sk %p", sock, sk);
@@ -703,14 +701,24 @@ static int sco_sock_sendmsg(struct socket *sock, struct msghdr *msg,
if (msg->msg_flags & MSG_OOB)
return -EOPNOTSUPP;
+ buf = kmalloc(len, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ if (memcpy_from_msg(buf, msg, len)) {
+ kfree(buf);
+ return -EFAULT;
+ }
+
lock_sock(sk);
if (sk->sk_state == BT_CONNECTED)
- err = sco_send_frame(sk, msg, len);
+ err = sco_send_frame(sk, buf, len, msg->msg_flags);
else
err = -ENOTCONN;
release_sock(sk);
+ kfree(buf);
return err;
}
--
2.33.0
From: Tetsuo Handa <[email protected]>
[ Upstream commit f91488ee15bd3cac467e2d6a361fc2d34d1052ae ]
syzbot is reporting kernel panic at smk_cipso_doi() due to memory
allocation fault injection [1]. The reason for need to use panic() was
not explained. But since no fix was proposed for 18 months, for now
let's use __GFP_NOFAIL for utilizing syzbot resource on other bugs.
Link: https://syzkaller.appspot.com/bug?extid=89731ccb6fec15ce1c22 [1]
Reported-by: syzbot <[email protected]>
Signed-off-by: Tetsuo Handa <[email protected]>
Signed-off-by: Casey Schaufler <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
security/smack/smackfs.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/security/smack/smackfs.c b/security/smack/smackfs.c
index 25705a72d31bc..9fdf404a318f9 100644
--- a/security/smack/smackfs.c
+++ b/security/smack/smackfs.c
@@ -721,9 +721,7 @@ static void smk_cipso_doi(void)
printk(KERN_WARNING "%s:%d remove rc = %d\n",
__func__, __LINE__, rc);
- doip = kmalloc(sizeof(struct cipso_v4_doi), GFP_KERNEL);
- if (doip == NULL)
- panic("smack: Failed to initialize cipso DOI.\n");
+ doip = kmalloc(sizeof(struct cipso_v4_doi), GFP_KERNEL | __GFP_NOFAIL);
doip->map.std = NULL;
doip->doi = smk_cipso_doi_value;
doip->type = CIPSO_V4_MAP_PASS;
--
2.33.0
From: Johannes Berg <[email protected]>
[ Upstream commit e5322b9ab5f63536c41301150b7ce64605ce52cc ]
Just like we have default SMPS mode as dynamic in powersave,
we should not enable RX-diversity in powersave, to reduce
power consumption when connected to a non-MIMO AP.
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20211017113927.fc896bc5cdaa.I1d11da71b8a5cbe921a37058d5f578f1b14a2023@changeid
Signed-off-by: Luca Coelho <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/intel/iwlwifi/mvm/utils.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/utils.c b/drivers/net/wireless/intel/iwlwifi/mvm/utils.c
index d2cada0ab4264..3303fc85d76f5 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/utils.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/utils.c
@@ -1029,6 +1029,9 @@ bool iwl_mvm_rx_diversity_allowed(struct iwl_mvm *mvm)
lockdep_assert_held(&mvm->mutex);
+ if (iwlmvm_mod_params.power_scheme != IWL_POWER_SCHEME_CAM)
+ return false;
+
if (num_of_ant(iwl_mvm_get_valid_rx_ant(mvm)) == 1)
return false;
--
2.33.0
From: Zheyu Ma <[email protected]>
[ Upstream commit 257051a235c17e33782b6e24a4b17f2d7915aaec ]
When the driver fails to request the firmware, it calls its error
handler. In the error handler, the driver detaches device from driver
first before releasing the firmware, which can cause a use-after-free bug.
Fix this by releasing firmware first.
The following log reveals it:
[ 9.007301 ] BUG: KASAN: use-after-free in mwl8k_fw_state_machine+0x320/0xba0
[ 9.010143 ] Workqueue: events request_firmware_work_func
[ 9.010830 ] Call Trace:
[ 9.010830 ] dump_stack_lvl+0xa8/0xd1
[ 9.010830 ] print_address_description+0x87/0x3b0
[ 9.010830 ] kasan_report+0x172/0x1c0
[ 9.010830 ] ? mutex_unlock+0xd/0x10
[ 9.010830 ] ? mwl8k_fw_state_machine+0x320/0xba0
[ 9.010830 ] ? mwl8k_fw_state_machine+0x320/0xba0
[ 9.010830 ] __asan_report_load8_noabort+0x14/0x20
[ 9.010830 ] mwl8k_fw_state_machine+0x320/0xba0
[ 9.010830 ] ? mwl8k_load_firmware+0x5f0/0x5f0
[ 9.010830 ] request_firmware_work_func+0x172/0x250
[ 9.010830 ] ? read_lock_is_recursive+0x20/0x20
[ 9.010830 ] ? process_one_work+0x7a1/0x1100
[ 9.010830 ] ? request_firmware_nowait+0x460/0x460
[ 9.010830 ] ? __this_cpu_preempt_check+0x13/0x20
[ 9.010830 ] process_one_work+0x9bb/0x1100
Signed-off-by: Zheyu Ma <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/marvell/mwl8k.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/marvell/mwl8k.c b/drivers/net/wireless/marvell/mwl8k.c
index e39aaee92addb..d5f766044221a 100644
--- a/drivers/net/wireless/marvell/mwl8k.c
+++ b/drivers/net/wireless/marvell/mwl8k.c
@@ -5788,8 +5788,8 @@ static void mwl8k_fw_state_machine(const struct firmware *fw, void *context)
fail:
priv->fw_state = FW_STATE_ERROR;
complete(&priv->firmware_loading_complete);
- device_release_driver(&priv->pdev->dev);
mwl8k_release_firmware(priv);
+ device_release_driver(&priv->pdev->dev);
}
#define MAX_RESTART_ATTEMPTS 1
--
2.33.0
From: Ye Bin <[email protected]>
[ Upstream commit 39fbef4b0f77f9c89c8f014749ca533643a37c9f ]
The following kernel crash can be triggered:
[ 89.266592] ------------[ cut here ]------------
[ 89.267427] kernel BUG at fs/buffer.c:3020!
[ 89.268264] invalid opcode: 0000 [#1] SMP KASAN PTI
[ 89.269116] CPU: 7 PID: 1750 Comm: kmmpd-loop0 Not tainted 5.10.0-862.14.0.6.x86_64-08610-gc932cda3cef4-dirty #20
[ 89.273169] RIP: 0010:submit_bh_wbc.isra.0+0x538/0x6d0
[ 89.277157] RSP: 0018:ffff888105ddfd08 EFLAGS: 00010246
[ 89.278093] RAX: 0000000000000005 RBX: ffff888124231498 RCX: ffffffffb2772612
[ 89.279332] RDX: 1ffff11024846293 RSI: 0000000000000008 RDI: ffff888124231498
[ 89.280591] RBP: ffff8881248cc000 R08: 0000000000000001 R09: ffffed1024846294
[ 89.281851] R10: ffff88812423149f R11: ffffed1024846293 R12: 0000000000003800
[ 89.283095] R13: 0000000000000001 R14: 0000000000000000 R15: ffff8881161f7000
[ 89.284342] FS: 0000000000000000(0000) GS:ffff88839b5c0000(0000) knlGS:0000000000000000
[ 89.285711] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 89.286701] CR2: 00007f166ebc01a0 CR3: 0000000435c0e000 CR4: 00000000000006e0
[ 89.287919] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 89.289138] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 89.290368] Call Trace:
[ 89.290842] write_mmp_block+0x2ca/0x510
[ 89.292218] kmmpd+0x433/0x9a0
[ 89.294902] kthread+0x2dd/0x3e0
[ 89.296268] ret_from_fork+0x22/0x30
[ 89.296906] Modules linked in:
by running the following commands:
1. mkfs.ext4 -O mmp /dev/sda -b 1024
2. mount /dev/sda /home/test
3. echo "/dev/sda" > /sys/power/resume
That happens because swsusp_check() calls set_blocksize() on the
target partition which confuses the file system:
Thread1 Thread2
mount /dev/sda /home/test
get s_mmp_bh --> has mapped flag
start kmmpd thread
echo "/dev/sda" > /sys/power/resume
resume_store
software_resume
swsusp_check
set_blocksize
truncate_inode_pages_range
truncate_cleanup_page
block_invalidatepage
discard_buffer --> clean mapped flag
write_mmp_block
submit_bh
submit_bh_wbc
BUG_ON(!buffer_mapped(bh))
To address this issue, modify swsusp_check() to open the target block
device with exclusive access.
Signed-off-by: Ye Bin <[email protected]>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/power/swap.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/kernel/power/swap.c b/kernel/power/swap.c
index d7cdc426ee380..2bd3670a093de 100644
--- a/kernel/power/swap.c
+++ b/kernel/power/swap.c
@@ -1526,9 +1526,10 @@ end:
int swsusp_check(void)
{
int error;
+ void *holder;
hib_resume_bdev = blkdev_get_by_dev(swsusp_resume_device,
- FMODE_READ, NULL);
+ FMODE_READ | FMODE_EXCL, &holder);
if (!IS_ERR(hib_resume_bdev)) {
set_blocksize(hib_resume_bdev, PAGE_SIZE);
clear_page(swsusp_header);
@@ -1550,7 +1551,7 @@ int swsusp_check(void)
put:
if (error)
- blkdev_put(hib_resume_bdev, FMODE_READ);
+ blkdev_put(hib_resume_bdev, FMODE_READ | FMODE_EXCL);
else
pr_debug("PM: Image signature found, resuming\n");
} else {
--
2.33.0
From: Wang ShaoBo <[email protected]>
[ Upstream commit 1bff51ea59a9afb67d2dd78518ab0582a54a472c ]
use-after-free error in lock_sock_nested is reported:
[ 179.140137][ T3731] =====================================================
[ 179.142675][ T3731] BUG: KMSAN: use-after-free in lock_sock_nested+0x280/0x2c0
[ 179.145494][ T3731] CPU: 4 PID: 3731 Comm: kworker/4:2 Not tainted 5.12.0-rc6+ #54
[ 179.148432][ T3731] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
[ 179.151806][ T3731] Workqueue: events l2cap_chan_timeout
[ 179.152730][ T3731] Call Trace:
[ 179.153301][ T3731] dump_stack+0x24c/0x2e0
[ 179.154063][ T3731] kmsan_report+0xfb/0x1e0
[ 179.154855][ T3731] __msan_warning+0x5c/0xa0
[ 179.155579][ T3731] lock_sock_nested+0x280/0x2c0
[ 179.156436][ T3731] ? kmsan_get_metadata+0x116/0x180
[ 179.157257][ T3731] l2cap_sock_teardown_cb+0xb8/0x890
[ 179.158154][ T3731] ? __msan_metadata_ptr_for_load_8+0x10/0x20
[ 179.159141][ T3731] ? kmsan_get_metadata+0x116/0x180
[ 179.159994][ T3731] ? kmsan_get_shadow_origin_ptr+0x84/0xb0
[ 179.160959][ T3731] ? l2cap_sock_recv_cb+0x420/0x420
[ 179.161834][ T3731] l2cap_chan_del+0x3e1/0x1d50
[ 179.162608][ T3731] ? kmsan_get_metadata+0x116/0x180
[ 179.163435][ T3731] ? kmsan_get_shadow_origin_ptr+0x84/0xb0
[ 179.164406][ T3731] l2cap_chan_close+0xeea/0x1050
[ 179.165189][ T3731] ? kmsan_internal_unpoison_shadow+0x42/0x70
[ 179.166180][ T3731] l2cap_chan_timeout+0x1da/0x590
[ 179.167066][ T3731] ? __msan_metadata_ptr_for_load_8+0x10/0x20
[ 179.168023][ T3731] ? l2cap_chan_create+0x560/0x560
[ 179.168818][ T3731] process_one_work+0x121d/0x1ff0
[ 179.169598][ T3731] worker_thread+0x121b/0x2370
[ 179.170346][ T3731] kthread+0x4ef/0x610
[ 179.171010][ T3731] ? process_one_work+0x1ff0/0x1ff0
[ 179.171828][ T3731] ? kthread_blkcg+0x110/0x110
[ 179.172587][ T3731] ret_from_fork+0x1f/0x30
[ 179.173348][ T3731]
[ 179.173752][ T3731] Uninit was created at:
[ 179.174409][ T3731] kmsan_internal_poison_shadow+0x5c/0xf0
[ 179.175373][ T3731] kmsan_slab_free+0x76/0xc0
[ 179.176060][ T3731] kfree+0x3a5/0x1180
[ 179.176664][ T3731] __sk_destruct+0x8af/0xb80
[ 179.177375][ T3731] __sk_free+0x812/0x8c0
[ 179.178032][ T3731] sk_free+0x97/0x130
[ 179.178686][ T3731] l2cap_sock_release+0x3d5/0x4d0
[ 179.179457][ T3731] sock_close+0x150/0x450
[ 179.180117][ T3731] __fput+0x6bd/0xf00
[ 179.180787][ T3731] ____fput+0x37/0x40
[ 179.181481][ T3731] task_work_run+0x140/0x280
[ 179.182219][ T3731] do_exit+0xe51/0x3e60
[ 179.182930][ T3731] do_group_exit+0x20e/0x450
[ 179.183656][ T3731] get_signal+0x2dfb/0x38f0
[ 179.184344][ T3731] arch_do_signal_or_restart+0xaa/0xe10
[ 179.185266][ T3731] exit_to_user_mode_prepare+0x2d2/0x560
[ 179.186136][ T3731] syscall_exit_to_user_mode+0x35/0x60
[ 179.186984][ T3731] do_syscall_64+0xc5/0x140
[ 179.187681][ T3731] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 179.188604][ T3731] =====================================================
In our case, there are two Thread A and B:
Context: Thread A: Context: Thread B:
l2cap_chan_timeout() __se_sys_shutdown()
l2cap_chan_close() l2cap_sock_shutdown()
l2cap_chan_del() l2cap_chan_close()
l2cap_sock_teardown_cb() l2cap_sock_teardown_cb()
Once l2cap_sock_teardown_cb() excuted, this sock will be marked as SOCK_ZAPPED,
and can be treated as killable in l2cap_sock_kill() if sock_orphan() has
excuted, at this time we close sock through sock_close() which end to call
l2cap_sock_kill() like Thread C:
Context: Thread C:
sock_close()
l2cap_sock_release()
sock_orphan()
l2cap_sock_kill() #free sock if refcnt is 1
If C completed, Once A or B reaches l2cap_sock_teardown_cb() again,
use-after-free happened.
We should set chan->data to NULL if sock is destructed, for telling teardown
operation is not allowed in l2cap_sock_teardown_cb(), and also we should
avoid killing an already killed socket in l2cap_sock_close_cb().
Signed-off-by: Wang ShaoBo <[email protected]>
Signed-off-by: Luiz Augusto von Dentz <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/bluetooth/l2cap_sock.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/net/bluetooth/l2cap_sock.c b/net/bluetooth/l2cap_sock.c
index 3905af1d300f7..13d070e7738db 100644
--- a/net/bluetooth/l2cap_sock.c
+++ b/net/bluetooth/l2cap_sock.c
@@ -1329,6 +1329,9 @@ static void l2cap_sock_close_cb(struct l2cap_chan *chan)
{
struct sock *sk = chan->data;
+ if (!sk)
+ return;
+
l2cap_sock_kill(sk);
}
@@ -1337,6 +1340,9 @@ static void l2cap_sock_teardown_cb(struct l2cap_chan *chan, int err)
struct sock *sk = chan->data;
struct sock *parent;
+ if (!sk)
+ return;
+
BT_DBG("chan %p state %s", chan, state_to_string(chan->state));
/* This callback can be called both for server (BT_LISTEN)
@@ -1520,8 +1526,10 @@ static void l2cap_sock_destruct(struct sock *sk)
{
BT_DBG("sk %p", sk);
- if (l2cap_pi(sk)->chan)
+ if (l2cap_pi(sk)->chan) {
+ l2cap_pi(sk)->chan->data = NULL;
l2cap_chan_put(l2cap_pi(sk)->chan);
+ }
if (l2cap_pi(sk)->rx_busy_skb) {
kfree_skb(l2cap_pi(sk)->rx_busy_skb);
--
2.33.0
From: Masami Hiramatsu <[email protected]>
[ Upstream commit b3ea5d56f212ad81328c82454829a736197ebccc ]
Currently the stacktrace on clang compiled arm kernel uses the 'lr'
register to find the first frame address from pt_regs. However, that
is wrong after calling another function, because the 'lr' register
is used by 'bl' instruction and never be recovered.
As same as gcc arm kernel, directly use the frame pointer (r11) of
the pt_regs to find the first frame address.
Note that this fixes kretprobe stacktrace issue only with
CONFIG_UNWINDER_FRAME_POINTER=y. For the CONFIG_UNWINDER_ARM,
we need another fix.
Signed-off-by: Masami Hiramatsu <[email protected]>
Reviewed-by: Nick Desaulniers <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/kernel/stacktrace.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/arch/arm/kernel/stacktrace.c b/arch/arm/kernel/stacktrace.c
index ba9b9a77bcd2c..31af81d46aaed 100644
--- a/arch/arm/kernel/stacktrace.c
+++ b/arch/arm/kernel/stacktrace.c
@@ -52,8 +52,7 @@ int notrace unwind_frame(struct stackframe *frame)
frame->sp = frame->fp;
frame->fp = *(unsigned long *)(fp);
- frame->pc = frame->lr;
- frame->lr = *(unsigned long *)(fp + 4);
+ frame->pc = *(unsigned long *)(fp + 4);
#else
/* check current frame pointer is within bounds */
if (fp < low + 12 || fp > high - 4)
--
2.33.0
From: Stephen Suryaputra <[email protected]>
[ Upstream commit 61e18ce7348bfefb5688a8bcd4b4d6b37c0f9b2a ]
When addr_gen_mode is set to IN6_ADDR_GEN_MODE_NONE, the link-local addr
should not be generated. But it isn't the case for GRE (as well as GRE6)
and SIT tunnels. Make it so that tunnels consider the addr_gen_mode,
especially for IN6_ADDR_GEN_MODE_NONE.
Do this in add_v4_addrs() to cover both GRE and SIT only if the addr
scope is link.
Signed-off-by: Stephen Suryaputra <[email protected]>
Acked-by: Antonio Quartulli <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/ipv6/addrconf.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index e47d5047d5373..178a3b26f9d2c 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -2996,6 +2996,9 @@ static void sit_add_v4_addrs(struct inet6_dev *idev)
memcpy(&addr.s6_addr32[3], idev->dev->dev_addr, 4);
if (idev->dev->flags&IFF_POINTOPOINT) {
+ if (idev->cnf.addr_gen_mode == IN6_ADDR_GEN_MODE_NONE)
+ return;
+
addr.s6_addr32[0] = htonl(0xfe800000);
scope = IFA_LINK;
plen = 64;
--
2.33.0
From: Arnd Bergmann <[email protected]>
[ Upstream commit 345dac33f58894a56d17b92a41be10e16585ceff ]
When configuring the kernel for big-endian, we set either BE-8 or BE-32
based on the CPU architecture level. Until linux-4.4, we did not have
any ARMv7-M platform allowing big-endian builds, but now i.MX/Vybrid
is in that category, adn we get a build error because of this:
arch/arm/kernel/module-plts.c: In function 'get_module_plt':
arch/arm/kernel/module-plts.c:60:46: error: implicit declaration of function '__opcode_to_mem_thumb32' [-Werror=implicit-function-declaration]
This comes down to picking the wrong default, ARMv7-M uses BE8
like ARMv7-A does. Changing the default gets the kernel to compile
and presumably works.
https://lore.kernel.org/all/[email protected]/
Tested-by: Vladimir Murzin <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Russell King (Oracle) <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/mm/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 50e0b45a22dba..77fd4446b5fc8 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -757,7 +757,7 @@ config CPU_BIG_ENDIAN
config CPU_ENDIAN_BE8
bool
depends on CPU_BIG_ENDIAN
- default CPU_V6 || CPU_V6K || CPU_V7
+ default CPU_V6 || CPU_V6K || CPU_V7 || CPU_V7M
help
Support for the BE-8 (big-endian) mode on ARMv6 and ARMv7 processors.
--
2.33.0
From: Aleksander Jan Bajkowski <[email protected]>
[ Upstream commit c12aa581f6d5e80c3c3675ab26a52c2b3b62f76e ]
Reading the DMA registers immediately after the reset causes
Data Bus Error. Adding a small delay fixes this issue.
Signed-off-by: Aleksander Jan Bajkowski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/mips/lantiq/xway/dma.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/mips/lantiq/xway/dma.c b/arch/mips/lantiq/xway/dma.c
index 805b3a6ab2d60..ce7e033b4bb18 100644
--- a/arch/mips/lantiq/xway/dma.c
+++ b/arch/mips/lantiq/xway/dma.c
@@ -22,6 +22,7 @@
#include <linux/export.h>
#include <linux/spinlock.h>
#include <linux/clk.h>
+#include <linux/delay.h>
#include <linux/err.h>
#include <lantiq_soc.h>
@@ -234,6 +235,8 @@ ltq_dma_init(struct platform_device *pdev)
clk_enable(clk);
ltq_dma_w32_mask(0, DMA_RESET, LTQ_DMA_CTRL);
+ usleep_range(1, 10);
+
/* disable all interrupts */
ltq_dma_w32(0, LTQ_DMA_IRNEN);
--
2.33.0
From: Peter Zijlstra <[email protected]>
[ Upstream commit ce0b9c805dd66d5e49fd53ec5415ae398f4c56e6 ]
vmlinux.o: warning: objtool: look_up_lock_class()+0xc7: call to rcu_read_lock_any_held() leaves .noinstr.text section
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/locking/lockdep.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/kernel/locking/lockdep.c b/kernel/locking/lockdep.c
index 03e3ab61a2edd..ac0725b1ada75 100644
--- a/kernel/locking/lockdep.c
+++ b/kernel/locking/lockdep.c
@@ -713,7 +713,7 @@ look_up_lock_class(struct lockdep_map *lock, unsigned int subclass)
if (DEBUG_LOCKS_WARN_ON(!irqs_disabled()))
return NULL;
- hlist_for_each_entry_rcu(class, hash_head, hash_entry) {
+ hlist_for_each_entry_rcu_notrace(class, hash_head, hash_entry) {
if (class->key == key) {
/*
* Huh! same key, different name? Did someone trample
--
2.33.0
From: Aleksander Jan Bajkowski <[email protected]>
[ Upstream commit 5ca9ce2ba4d5884cd94d1a856c675ab1242cd242 ]
Different SoCs have a different number of channels, e.g .:
* amazon-se has 10 channels,
* danube+ar9 have 20 channels,
* vr9 has 28 channels,
* ar10 has 24 channels.
We can read the ID register and, depending on the reported
number of channels, reset the appropriate number of channels.
Signed-off-by: Aleksander Jan Bajkowski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/mips/lantiq/xway/dma.c | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/arch/mips/lantiq/xway/dma.c b/arch/mips/lantiq/xway/dma.c
index ce7e033b4bb18..0de61165ef6e4 100644
--- a/arch/mips/lantiq/xway/dma.c
+++ b/arch/mips/lantiq/xway/dma.c
@@ -41,6 +41,7 @@
#define LTQ_DMA_PCTRL 0x44
#define LTQ_DMA_IRNEN 0xf4
+#define DMA_ID_CHNR GENMASK(26, 20) /* channel number */
#define DMA_DESCPT BIT(3) /* descriptor complete irq */
#define DMA_TX BIT(8) /* TX channel direction */
#define DMA_CHAN_ON BIT(0) /* channel on / off bit */
@@ -51,7 +52,6 @@
#define DMA_POLL BIT(31) /* turn on channel polling */
#define DMA_CLK_DIV4 BIT(6) /* polling clock divider */
#define DMA_2W_BURST BIT(1) /* 2 word burst length */
-#define DMA_MAX_CHANNEL 20 /* the soc has 20 channels */
#define DMA_ETOP_ENDIANNESS (0xf << 8) /* endianness swap etop channels */
#define DMA_WEIGHT (BIT(17) | BIT(16)) /* default channel wheight */
@@ -219,7 +219,7 @@ ltq_dma_init(struct platform_device *pdev)
{
struct clk *clk;
struct resource *res;
- unsigned id;
+ unsigned int id, nchannels;
int i;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -241,17 +241,18 @@ ltq_dma_init(struct platform_device *pdev)
ltq_dma_w32(0, LTQ_DMA_IRNEN);
/* reset/configure each channel */
- for (i = 0; i < DMA_MAX_CHANNEL; i++) {
+ id = ltq_dma_r32(LTQ_DMA_ID);
+ nchannels = ((id & DMA_ID_CHNR) >> 20);
+ for (i = 0; i < nchannels; i++) {
ltq_dma_w32(i, LTQ_DMA_CS);
ltq_dma_w32(DMA_CHAN_RST, LTQ_DMA_CCTRL);
ltq_dma_w32(DMA_POLL | DMA_CLK_DIV4, LTQ_DMA_CPOLL);
ltq_dma_w32_mask(DMA_CHAN_ON, 0, LTQ_DMA_CCTRL);
}
- id = ltq_dma_r32(LTQ_DMA_ID);
dev_info(&pdev->dev,
"Init done - hw rev: %X, ports: %d, channels: %d\n",
- id & 0x1f, (id >> 16) & 0xf, id >> 20);
+ id & 0x1f, (id >> 16) & 0xf, nchannels);
return 0;
}
--
2.33.0
From: Barnabás Pőcze <[email protected]>
[ Upstream commit 1975718c488a39128f1f515b23ae61a5a214cc3d ]
Previously, `__query_block()` would fail if the
second WCxx method call failed. However, the
WQxx method might have succeeded, and potentially
allocated memory for the result. Instead of
throwing away the result and potentially
leaking memory, ignore the result of
the second WCxx call.
Signed-off-by: Barnabás Pőcze <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Hans de Goede <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/platform/x86/wmi.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/platform/x86/wmi.c b/drivers/platform/x86/wmi.c
index a56e997816b23..07c1e0829b19a 100644
--- a/drivers/platform/x86/wmi.c
+++ b/drivers/platform/x86/wmi.c
@@ -307,7 +307,14 @@ static acpi_status __query_block(struct wmi_block *wblock, u8 instance,
* the WQxx method failed - we should disable collection anyway.
*/
if ((block->flags & ACPI_WMI_EXPENSIVE) && ACPI_SUCCESS(wc_status)) {
- status = acpi_execute_simple_method(handle, wc_method, 0);
+ /*
+ * Ignore whether this WCxx call succeeds or not since
+ * the previously executed WQxx method call might have
+ * succeeded, and returning the failing status code
+ * of this call would throw away the result of the WQxx
+ * call, potentially leaking memory.
+ */
+ acpi_execute_simple_method(handle, wc_method, 0);
}
return status;
--
2.33.0
From: Pawan Gupta <[email protected]>
[ Upstream commit 0817534ff9ea809fac1322c5c8c574be8483ea57 ]
Syzkaller reported use-after-free bug as described in [1]. The bug is
triggered when smk_set_cipso() tries to free stale category bitmaps
while there are concurrent reader(s) using the same bitmaps.
Wait for RCU grace period to finish before freeing the category bitmaps
in smk_set_cipso(). This makes sure that there are no more readers using
the stale bitmaps and freeing them should be safe.
[1] https://lore.kernel.org/netdev/[email protected]/
Reported-by: [email protected]
Signed-off-by: Pawan Gupta <[email protected]>
Signed-off-by: Casey Schaufler <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
security/smack/smackfs.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/security/smack/smackfs.c b/security/smack/smackfs.c
index 009e83ee2d002..25705a72d31bc 100644
--- a/security/smack/smackfs.c
+++ b/security/smack/smackfs.c
@@ -859,6 +859,7 @@ static int smk_open_cipso(struct inode *inode, struct file *file)
static ssize_t smk_set_cipso(struct file *file, const char __user *buf,
size_t count, loff_t *ppos, int format)
{
+ struct netlbl_lsm_catmap *old_cat;
struct smack_known *skp;
struct netlbl_lsm_secattr ncats;
char mapcatset[SMK_CIPSOLEN];
@@ -948,9 +949,11 @@ static ssize_t smk_set_cipso(struct file *file, const char __user *buf,
rc = smk_netlbl_mls(maplevel, mapcatset, &ncats, SMK_CIPSOLEN);
if (rc >= 0) {
- netlbl_catmap_free(skp->smk_netlabel.attr.mls.cat);
+ old_cat = skp->smk_netlabel.attr.mls.cat;
skp->smk_netlabel.attr.mls.cat = ncats.attr.mls.cat;
skp->smk_netlabel.attr.mls.lvl = ncats.attr.mls.lvl;
+ synchronize_rcu();
+ netlbl_catmap_free(old_cat);
rc = count;
}
--
2.33.0
From: Peter Zijlstra <[email protected]>
[ Upstream commit 7fae4c24a2b84a66c7be399727aca11e7a888462 ]
It turns out that a single page of stack is trivial to overflow with
all the tracing gunk enabled. Raise the exception stacks to 2 pages,
which is still half the interrupt stacks, which are at 4 pages.
Reported-by: Michael Wang <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/include/asm/page_64_types.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/x86/include/asm/page_64_types.h b/arch/x86/include/asm/page_64_types.h
index 50c8baaca4b06..4c807635e6244 100644
--- a/arch/x86/include/asm/page_64_types.h
+++ b/arch/x86/include/asm/page_64_types.h
@@ -20,7 +20,7 @@
#define THREAD_SIZE (PAGE_SIZE << THREAD_SIZE_ORDER)
#define CURRENT_MASK (~(THREAD_SIZE - 1))
-#define EXCEPTION_STACK_ORDER (0 + KASAN_STACK_ORDER)
+#define EXCEPTION_STACK_ORDER (1 + KASAN_STACK_ORDER)
#define EXCEPTION_STKSZ (PAGE_SIZE << EXCEPTION_STACK_ORDER)
#define DEBUG_STACK_ORDER (EXCEPTION_STACK_ORDER + 1)
--
2.33.0
From: Wang Hai <[email protected]>
commit 910c996335c37552ee30fcb837375b808bb4f33b upstream.
I got memory leak as follows when doing fault injection test:
unreferenced object 0xffff888258228440 (size 64):
comm "kworker/7:2", pid 2005, jiffies 4294989509 (age 824.540s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff8167939c>] slab_post_alloc_hook+0x9c/0x490
[<ffffffff8167f627>] kmem_cache_alloc_trace+0x1f7/0x470
[<ffffffffa02ac0e4>] keyspan_port_probe+0xa4/0x5d0 [keyspan]
[<ffffffffa0294c07>] usb_serial_device_probe+0x97/0x1d0 [usbserial]
[<ffffffff82b50ca7>] really_probe+0x167/0x460
[<ffffffff82b51099>] __driver_probe_device+0xf9/0x180
[<ffffffff82b51173>] driver_probe_device+0x53/0x130
[<ffffffff82b516f5>] __device_attach_driver+0x105/0x130
[<ffffffff82b4cfe9>] bus_for_each_drv+0x129/0x190
[<ffffffff82b50a69>] __device_attach+0x1c9/0x270
[<ffffffff82b518d0>] device_initial_probe+0x20/0x30
[<ffffffff82b4f062>] bus_probe_device+0x142/0x160
[<ffffffff82b4a4e9>] device_add+0x829/0x1300
[<ffffffffa0295fda>] usb_serial_probe.cold+0xc9b/0x14ac [usbserial]
[<ffffffffa02266aa>] usb_probe_interface+0x1aa/0x3c0 [usbcore]
[<ffffffff82b50ca7>] really_probe+0x167/0x460
If keyspan_port_probe() fails to allocate memory for an out_buffer[i] or
in_buffer[i], the previously allocated memory for out_buffer or
in_buffer needs to be freed on the error handling path, otherwise a
memory leak will result.
Fixes: bad41a5bf177 ("USB: keyspan: fix port DMA-buffer allocations")
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Wang Hai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: [email protected] # 3.12
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/serial/keyspan.c | 15 +++++++--------
1 file changed, 7 insertions(+), 8 deletions(-)
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -2914,22 +2914,22 @@ static int keyspan_port_probe(struct usb
for (i = 0; i < ARRAY_SIZE(p_priv->in_buffer); ++i) {
p_priv->in_buffer[i] = kzalloc(IN_BUFLEN, GFP_KERNEL);
if (!p_priv->in_buffer[i])
- goto err_in_buffer;
+ goto err_free_in_buffer;
}
for (i = 0; i < ARRAY_SIZE(p_priv->out_buffer); ++i) {
p_priv->out_buffer[i] = kzalloc(OUT_BUFLEN, GFP_KERNEL);
if (!p_priv->out_buffer[i])
- goto err_out_buffer;
+ goto err_free_out_buffer;
}
p_priv->inack_buffer = kzalloc(INACK_BUFLEN, GFP_KERNEL);
if (!p_priv->inack_buffer)
- goto err_inack_buffer;
+ goto err_free_out_buffer;
p_priv->outcont_buffer = kzalloc(OUTCONT_BUFLEN, GFP_KERNEL);
if (!p_priv->outcont_buffer)
- goto err_outcont_buffer;
+ goto err_free_inack_buffer;
p_priv->device_details = d_details;
@@ -2975,15 +2975,14 @@ static int keyspan_port_probe(struct usb
return 0;
-err_outcont_buffer:
+err_free_inack_buffer:
kfree(p_priv->inack_buffer);
-err_inack_buffer:
+err_free_out_buffer:
for (i = 0; i < ARRAY_SIZE(p_priv->out_buffer); ++i)
kfree(p_priv->out_buffer[i]);
-err_out_buffer:
+err_free_in_buffer:
for (i = 0; i < ARRAY_SIZE(p_priv->in_buffer); ++i)
kfree(p_priv->in_buffer[i]);
-err_in_buffer:
kfree(p_priv);
return -ENOMEM;
From: Sven Schnelle <[email protected]>
[ Upstream commit 1030d681319b43869e0d5b568b9d0226652d1a6f ]
I've got the following splat after enabling preemption:
[ 3.724721] BUG: using __this_cpu_add() in preemptible [00000000] code: swapper/0/1
[ 3.734630] caller is __this_cpu_preempt_check+0x38/0x50
[ 3.740635] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.15.0-rc4-64bit+ #324
[ 3.744605] Hardware name: 9000/785/C8000
[ 3.744605] Backtrace:
[ 3.744605] [<00000000401d9d58>] show_stack+0x74/0xb0
[ 3.744605] [<0000000040c27bd4>] dump_stack_lvl+0x10c/0x188
[ 3.744605] [<0000000040c27c84>] dump_stack+0x34/0x48
[ 3.744605] [<0000000040c33438>] check_preemption_disabled+0x178/0x1b0
[ 3.744605] [<0000000040c334f8>] __this_cpu_preempt_check+0x38/0x50
[ 3.744605] [<00000000401d632c>] flush_tlb_all+0x58/0x2e0
[ 3.744605] [<00000000401075c0>] 0x401075c0
[ 3.744605] [<000000004010b8fc>] 0x4010b8fc
[ 3.744605] [<00000000401080fc>] 0x401080fc
[ 3.744605] [<00000000401d5224>] do_one_initcall+0x128/0x378
[ 3.744605] [<0000000040102de8>] 0x40102de8
[ 3.744605] [<0000000040c33864>] kernel_init+0x60/0x3a8
[ 3.744605] [<00000000401d1020>] ret_from_kernel_thread+0x20/0x28
[ 3.744605]
Fix this by moving the __inc_irq_stat() into the locked section.
Signed-off-by: Sven Schnelle <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/parisc/mm/init.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c
index 8be075f81ce66..c8af5296cfd24 100644
--- a/arch/parisc/mm/init.c
+++ b/arch/parisc/mm/init.c
@@ -895,9 +895,9 @@ void flush_tlb_all(void)
{
int do_recycle;
- __inc_irq_stat(irq_tlb_count);
do_recycle = 0;
spin_lock(&sid_lock);
+ __inc_irq_stat(irq_tlb_count);
if (dirty_space_ids > RECYCLE_THRESHOLD) {
BUG_ON(recycle_inuse); /* FIXME: Use a semaphore/wait queue here */
get_dirty_sids(&recycle_ndirty,recycle_dirty_array);
@@ -916,8 +916,8 @@ void flush_tlb_all(void)
#else
void flush_tlb_all(void)
{
- __inc_irq_stat(irq_tlb_count);
spin_lock(&sid_lock);
+ __inc_irq_stat(irq_tlb_count);
flush_tlb_all_local(NULL);
recycle_sids();
spin_unlock(&sid_lock);
--
2.33.0
From: Linus Lüssing <[email protected]>
[ Upstream commit 4925642d541278575ad1948c5924d71ffd57ef14 ]
In tests with two Lima boards from 8devices (QCA4531 based) on OpenWrt
19.07 we could force a silent restart of a device with no serial
output when we were sending a high amount of UDP traffic (iperf3 at 80
MBit/s in both directions from external hosts, saturating the wifi and
causing a load of about 4.5 to 6) and were then triggering an
ath9k_queue_reset().
Further debugging showed that the restart was caused by the ath79
watchdog. With disabled watchdog we could observe that the device was
constantly going into ath_isr() interrupt handler and was returning
early after the ATH_OP_HW_RESET flag test, without clearing any
interrupts. Even though ath9k_queue_reset() calls
ath9k_hw_kill_interrupts().
With JTAG we could observe the following race condition:
1) ath9k_queue_reset()
...
-> ath9k_hw_kill_interrupts()
-> set_bit(ATH_OP_HW_RESET, &common->op_flags);
...
<- returns
2) ath9k_tasklet()
...
-> ath9k_hw_resume_interrupts()
...
<- returns
3) loops around:
...
handle_int()
-> ath_isr()
...
-> if (test_bit(ATH_OP_HW_RESET,
&common->op_flags))
return IRQ_HANDLED;
x) ath_reset_internal():
=> never reached <=
And in ath_isr() we would typically see the following interrupts /
interrupt causes:
* status: 0x00111030 or 0x00110030
* async_cause: 2 (AR_INTR_MAC_IPQ)
* sync_cause: 0
So the ath9k_tasklet() reenables the ath9k interrupts
through ath9k_hw_resume_interrupts() which ath9k_queue_reset() had just
disabled. And ath_isr() then keeps firing because it returns IRQ_HANDLED
without actually clearing the interrupt.
To fix this IRQ storm also clear/disable the interrupts again when we
are in reset state.
Cc: Sven Eckelmann <[email protected]>
Cc: Simon Wunderlich <[email protected]>
Cc: Linus Lüssing <[email protected]>
Fixes: 872b5d814f99 ("ath9k: do not access hardware on IRQs during reset")
Signed-off-by: Linus Lüssing <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/ath9k/main.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 173960682ea06..507d8c5149686 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -529,8 +529,10 @@ irqreturn_t ath_isr(int irq, void *dev)
ath9k_debug_sync_cause(sc, sync_cause);
status &= ah->imask; /* discard unasked-for bits */
- if (test_bit(ATH_OP_HW_RESET, &common->op_flags))
+ if (test_bit(ATH_OP_HW_RESET, &common->op_flags)) {
+ ath9k_hw_kill_interrupts(sc->sc_ah);
return IRQ_HANDLED;
+ }
/*
* If there are no status bits set, then this interrupt was not
--
2.33.0
From: Yang Yingliang <[email protected]>
[ Upstream commit ada61aa0b1184a8fda1a89a340c7d6cc4e59aee5 ]
I got memory leak as follows when doing fault injection test:
unreferenced object 0xffff888102740438 (size 8):
comm "27", pid 859, jiffies 4295031351 (age 143.992s)
hex dump (first 8 bytes):
68 77 6d 6f 6e 30 00 00 hwmon0..
backtrace:
[<00000000544b5996>] __kmalloc_track_caller+0x1a6/0x300
[<00000000df0d62b9>] kvasprintf+0xad/0x140
[<00000000d3d2a3da>] kvasprintf_const+0x62/0x190
[<000000005f8f0f29>] kobject_set_name_vargs+0x56/0x140
[<00000000b739e4b9>] dev_set_name+0xb0/0xe0
[<0000000095b69c25>] __hwmon_device_register+0xf19/0x1e50 [hwmon]
[<00000000a7e65b52>] hwmon_device_register_with_info+0xcb/0x110 [hwmon]
[<000000006f181e86>] devm_hwmon_device_register_with_info+0x85/0x100 [hwmon]
[<0000000081bdc567>] tmp421_probe+0x2d2/0x465 [tmp421]
[<00000000502cc3f8>] i2c_device_probe+0x4e1/0xbb0
[<00000000f90bda3b>] really_probe+0x285/0xc30
[<000000007eac7b77>] __driver_probe_device+0x35f/0x4f0
[<000000004953d43d>] driver_probe_device+0x4f/0x140
[<000000002ada2d41>] __device_attach_driver+0x24c/0x330
[<00000000b3977977>] bus_for_each_drv+0x15d/0x1e0
[<000000005bf2a8e3>] __device_attach+0x267/0x410
When device_register() returns an error, the name allocated in
dev_set_name() will be leaked, the put_device() should be used
instead of calling hwmon_dev_release() to give up the device
reference, then the name will be freed in kobject_cleanup().
Reported-by: Hulk Robot <[email protected]>
Fixes: bab2243ce189 ("hwmon: Introduce hwmon_device_register_with_groups")
Signed-off-by: Yang Yingliang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hwmon/hwmon.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/hwmon/hwmon.c b/drivers/hwmon/hwmon.c
index 652973d83a07e..b1b5c1e97a430 100644
--- a/drivers/hwmon/hwmon.c
+++ b/drivers/hwmon/hwmon.c
@@ -627,8 +627,10 @@ __hwmon_device_register(struct device *dev, const char *name, void *drvdata,
dev_set_drvdata(hdev, drvdata);
dev_set_name(hdev, HWMON_ID_FORMAT, id);
err = device_register(hdev);
- if (err)
- goto free_hwmon;
+ if (err) {
+ put_device(hdev);
+ goto ida_remove;
+ }
if (dev && dev->of_node && chip && chip->ops->read &&
chip->info[0]->type == hwmon_chip &&
--
2.33.0
From: Dan Carpenter <[email protected]>
[ Upstream commit beae4a6258e64af609ad5995cc6b6056eb0d898e ]
The "msh" pointer is device managed, meaning that memstick_alloc_host()
calls device_initialize() on it. That means that it can't be free
using kfree() but must instead be freed with memstick_free_host().
Otherwise it leads to a tiny memory leak of device resources.
Fixes: 60fdd931d577 ("memstick: add support for JMicron jmb38x MemoryStick host controller")
Signed-off-by: Dan Carpenter <[email protected]>
Link: https://lore.kernel.org/r/20211011123912.GD15188@kili
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/memstick/host/jmb38x_ms.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/memstick/host/jmb38x_ms.c b/drivers/memstick/host/jmb38x_ms.c
index 08fa6400d2558..ba6cd576e9979 100644
--- a/drivers/memstick/host/jmb38x_ms.c
+++ b/drivers/memstick/host/jmb38x_ms.c
@@ -905,7 +905,7 @@ static struct memstick_host *jmb38x_ms_alloc_host(struct jmb38x_ms *jm, int cnt)
iounmap(host->addr);
err_out_free:
- kfree(msh);
+ memstick_free_host(msh);
return NULL;
}
--
2.33.0
From: Arnd Bergmann <[email protected]>
[ Upstream commit 4853396f03c3019eccf5cd113e464231e9ddf0b3 ]
clang-14 complains about a sanity check that always passes when the
page size is 64KB or larger:
drivers/memstick/core/ms_block.c:1739:21: error: result of comparison of constant 65536 with expression of type 'unsigned short' is always false [-Werror,-Wtautological-constant-out-of-range-compare]
if (msb->page_size > PAGE_SIZE) {
~~~~~~~~~~~~~~ ^ ~~~~~~~~~
This is fine, it will still work on all architectures, so just shut
up that warning with a cast.
Fixes: 0ab30494bc4f ("memstick: add support for legacy memorysticks")
Signed-off-by: Arnd Bergmann <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/memstick/core/ms_block.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/memstick/core/ms_block.c b/drivers/memstick/core/ms_block.c
index 22de7f5ed0323..ffe8757406713 100644
--- a/drivers/memstick/core/ms_block.c
+++ b/drivers/memstick/core/ms_block.c
@@ -1730,7 +1730,7 @@ static int msb_init_card(struct memstick_dev *card)
msb->pages_in_block = boot_block->attr.block_size * 2;
msb->block_size = msb->page_size * msb->pages_in_block;
- if (msb->page_size > PAGE_SIZE) {
+ if ((size_t)msb->page_size > PAGE_SIZE) {
/* this isn't supported by linux at all, anyway*/
dbg("device page %d size isn't supported", msb->page_size);
return -EINVAL;
--
2.33.0
From: Helge Deller <[email protected]>
[ Upstream commit 9cc2fa4f4a92ccc6760d764e7341be46ee8aaaa1 ]
The function end_of_stack() returns a pointer to the last entry of a
stack. For architectures like parisc where the stack grows upwards
return the pointer to the highest address in the stack.
Without this change I faced a crash on parisc, because the stackleak
functionality wrote STACKLEAK_POISON to the lowest address and thus
overwrote the first 4 bytes of the task_struct which included the
TIF_FLAGS.
Signed-off-by: Helge Deller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/linux/sched/task_stack.h | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/include/linux/sched/task_stack.h b/include/linux/sched/task_stack.h
index cb4828aaa34fd..3461beb89b040 100644
--- a/include/linux/sched/task_stack.h
+++ b/include/linux/sched/task_stack.h
@@ -25,7 +25,11 @@ static inline void *task_stack_page(const struct task_struct *task)
static inline unsigned long *end_of_stack(const struct task_struct *task)
{
+#ifdef CONFIG_STACK_GROWSUP
+ return (unsigned long *)((unsigned long)task->stack + THREAD_SIZE) - 1;
+#else
return task->stack;
+#endif
}
#elif !defined(__HAVE_THREAD_FUNCTIONS)
--
2.33.0
From: Anders Roxell <[email protected]>
[ Upstream commit 01de5fcd8b1ac0ca28d2bb0921226a54fdd62684 ]
When building the kernel with sparse enabled 'C=1' the following
warnings shows up:
kernel/power/swap.c:390:29: warning: incorrect type in assignment (different base types)
kernel/power/swap.c:390:29: expected int ret
kernel/power/swap.c:390:29: got restricted blk_status_t
This is due to function hib_wait_io() returns a 'blk_status_t' which is
a bitwise u8. Commit 5416da01ff6e ("PM: hibernate: Remove
blk_status_to_errno in hib_wait_io") seemed to have mixed up the return
type. However, the 4e4cbee93d56 ("block: switch bios to blk_status_t")
actually broke the behaviour by returning the wrong type.
Rework so function hib_wait_io() returns a 'int' instead of
'blk_status_t' and make sure to call function
blk_status_to_errno(hb->error)' when returning from function
hib_wait_io() a int gets returned.
Fixes: 4e4cbee93d56 ("block: switch bios to blk_status_t")
Fixes: 5416da01ff6e ("PM: hibernate: Remove blk_status_to_errno in hib_wait_io")
Signed-off-by: Anders Roxell <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/power/swap.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/kernel/power/swap.c b/kernel/power/swap.c
index 2bd3670a093de..8b37085a66903 100644
--- a/kernel/power/swap.c
+++ b/kernel/power/swap.c
@@ -292,7 +292,7 @@ static int hib_submit_io(int op, int op_flags, pgoff_t page_off, void *addr,
return error;
}
-static blk_status_t hib_wait_io(struct hib_bio_batch *hb)
+static int hib_wait_io(struct hib_bio_batch *hb)
{
wait_event(hb->wait, atomic_read(&hb->count) == 0);
return blk_status_to_errno(hb->error);
--
2.33.0
From: Dan Carpenter <[email protected]>
[ Upstream commit c1c8380b0320ab757e60ed90efc8b1992a943256 ]
The problem is that "channel" is an unsigned int, when it's less 5 the
value of "channel - 5" is not a negative number as one would expect but
is very high positive value instead.
This means that "start" becomes a very high positive value. The result
of that is that we never enter the "for (i = start; i <= end; i++) {"
loop. Instead of storing the result from b43legacy_radio_aci_detect()
it just uses zero.
Fixes: 75388acd0cd8 ("[B43LEGACY]: add mac80211-based driver for legacy BCM43xx devices")
Signed-off-by: Dan Carpenter <[email protected]>
Acked-by: Michael Büsch <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/20211006073542.GD8404@kili
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/broadcom/b43legacy/radio.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/broadcom/b43legacy/radio.c b/drivers/net/wireless/broadcom/b43legacy/radio.c
index 9501420340a91..5b1e8890305c1 100644
--- a/drivers/net/wireless/broadcom/b43legacy/radio.c
+++ b/drivers/net/wireless/broadcom/b43legacy/radio.c
@@ -299,7 +299,7 @@ u8 b43legacy_radio_aci_scan(struct b43legacy_wldev *dev)
& 0x7FFF);
b43legacy_set_all_gains(dev, 3, 8, 1);
- start = (channel - 5 > 0) ? channel - 5 : 1;
+ start = (channel > 5) ? channel - 5 : 1;
end = (channel + 5 < 14) ? channel + 5 : 13;
for (i = start; i <= end; i++) {
--
2.33.0
From: Sven Eckelmann <[email protected]>
[ Upstream commit 0a491167fe0cf9f26062462de2a8688b96125d48 ]
Most of the txpower for the ath10k firmware is stored as twicepower (0.5 dB
steps). This isn't the case for max_antenna_gain - which is still expected
by the firmware as dB.
The firmware is converting it from dB to the internal (twicepower)
representation when it calculates the limits of a channel. This can be seen
in tpc_stats when configuring "12" as max_antenna_gain. Instead of the
expected 12 (6 dB), the tpc_stats shows 24 (12 dB).
Tested on QCA9888 and IPQ4019 with firmware 10.4-3.5.3-00057.
Fixes: 02256930d9b8 ("ath10k: use proper tx power unit")
Signed-off-by: Sven Eckelmann <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/ath10k/mac.c | 6 +++---
drivers/net/wireless/ath/ath10k/wmi.h | 3 +++
2 files changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index e42546bc99efb..41ae999c685b8 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -990,7 +990,7 @@ static int ath10k_monitor_vdev_start(struct ath10k *ar, int vdev_id)
arg.channel.min_power = 0;
arg.channel.max_power = channel->max_power * 2;
arg.channel.max_reg_power = channel->max_reg_power * 2;
- arg.channel.max_antenna_gain = channel->max_antenna_gain * 2;
+ arg.channel.max_antenna_gain = channel->max_antenna_gain;
reinit_completion(&ar->vdev_setup_done);
@@ -1432,7 +1432,7 @@ static int ath10k_vdev_start_restart(struct ath10k_vif *arvif,
arg.channel.min_power = 0;
arg.channel.max_power = chandef->chan->max_power * 2;
arg.channel.max_reg_power = chandef->chan->max_reg_power * 2;
- arg.channel.max_antenna_gain = chandef->chan->max_antenna_gain * 2;
+ arg.channel.max_antenna_gain = chandef->chan->max_antenna_gain;
if (arvif->vdev_type == WMI_VDEV_TYPE_AP) {
arg.ssid = arvif->u.ap.ssid;
@@ -3091,7 +3091,7 @@ static int ath10k_update_channel_list(struct ath10k *ar)
ch->min_power = 0;
ch->max_power = channel->max_power * 2;
ch->max_reg_power = channel->max_reg_power * 2;
- ch->max_antenna_gain = channel->max_antenna_gain * 2;
+ ch->max_antenna_gain = channel->max_antenna_gain;
ch->reg_class_id = 0; /* FIXME */
/* FIXME: why use only legacy modes, why not any
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 947b74c64fec0..621f5597a3693 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -1945,7 +1945,9 @@ struct wmi_channel {
union {
__le32 reginfo1;
struct {
+ /* note: power unit is 1 dBm */
u8 antenna_max;
+ /* note: power unit is 0.5 dBm */
u8 max_tx_power;
} __packed;
} __packed;
@@ -1965,6 +1967,7 @@ struct wmi_channel_arg {
u32 min_power;
u32 max_power;
u32 max_reg_power;
+ /* note: power unit is 1 dBm */
u32 max_antenna_gain;
u32 reg_class_id;
enum wmi_phy_mode mode;
--
2.33.0
From: Nathan Chancellor <[email protected]>
[ Upstream commit fd96e35ea7b95f1e216277805be89d66e4ae962d ]
A new warning in clang points out a use of bitwise OR with boolean
expressions in this driver:
drivers/platform/x86/thinkpad_acpi.c:9061:11: error: use of bitwise '|' with boolean operands [-Werror,-Wbitwise-instead-of-logical]
else if ((strlencmp(cmd, "level disengaged") == 0) |
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
||
drivers/platform/x86/thinkpad_acpi.c:9061:11: note: cast one or both operands to int to silence this warning
1 error generated.
This should clearly be a logical OR so change it to fix the warning.
Fixes: fe98a52ce754 ("ACPI: thinkpad-acpi: add sysfs support to fan subdriver")
Link: https://github.com/ClangBuiltLinux/linux/issues/1476
Reported-by: Tor Vic <[email protected]>
Signed-off-by: Nathan Chancellor <[email protected]>
Reviewed-by: Nick Desaulniers <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Hans de Goede <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/platform/x86/thinkpad_acpi.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index 30bc952ea5529..9d836d779d475 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -8978,7 +8978,7 @@ static int fan_write_cmd_level(const char *cmd, int *rc)
if (strlencmp(cmd, "level auto") == 0)
level = TP_EC_FAN_AUTO;
- else if ((strlencmp(cmd, "level disengaged") == 0) |
+ else if ((strlencmp(cmd, "level disengaged") == 0) ||
(strlencmp(cmd, "level full-speed") == 0))
level = TP_EC_FAN_FULLSPEED;
else if (sscanf(cmd, "level %d", &level) != 1)
--
2.33.0
From: Jonas Dreßler <[email protected]>
[ Upstream commit cc8a8bc37466f79b24d972555237f3d591150602 ]
While looking at on-air packets using Wireshark, I noticed we're never
setting the initiator bit when sending DELBA requests to the AP: While
we set the bit on our del_ba_param_set bitmask, we forget to actually
copy that bitmask over to the command struct, which means we never
actually set the initiator bit.
Fix that and copy the bitmask over to the host_cmd_ds_11n_delba command
struct.
Fixes: 5e6e3a92b9a4 ("wireless: mwifiex: initial commit for Marvell mwifiex driver")
Signed-off-by: Jonas Dreßler <[email protected]>
Acked-by: Pali Rohár <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/marvell/mwifiex/11n.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/marvell/mwifiex/11n.c b/drivers/net/wireless/marvell/mwifiex/11n.c
index 7252069149115..2844f937cc659 100644
--- a/drivers/net/wireless/marvell/mwifiex/11n.c
+++ b/drivers/net/wireless/marvell/mwifiex/11n.c
@@ -632,14 +632,15 @@ int mwifiex_send_delba(struct mwifiex_private *priv, int tid, u8 *peer_mac,
uint16_t del_ba_param_set;
memset(&delba, 0, sizeof(delba));
- delba.del_ba_param_set = cpu_to_le16(tid << DELBA_TID_POS);
- del_ba_param_set = le16_to_cpu(delba.del_ba_param_set);
+ del_ba_param_set = tid << DELBA_TID_POS;
+
if (initiator)
del_ba_param_set |= IEEE80211_DELBA_PARAM_INITIATOR_MASK;
else
del_ba_param_set &= ~IEEE80211_DELBA_PARAM_INITIATOR_MASK;
+ delba.del_ba_param_set = cpu_to_le16(del_ba_param_set);
memcpy(&delba.peer_mac_addr, peer_mac, ETH_ALEN);
/* We don't wait for the response of this command */
--
2.33.0
From: Christophe JAILLET <[email protected]>
[ Upstream commit ce5f6c2c9b0fcb4094f8e162cfd37fb4294204f7 ]
The 'reg_vmmc' regulator is enabled in the probe. It is never disabled.
Neither in the error handling path of the probe nor in the remove
function.
Register a devm_action to disable it when needed.
Fixes: 4dc5a79f1350 ("mmc: mxs-mmc: enable regulator for mmc slot")
Signed-off-by: Christophe JAILLET <[email protected]>
Link: https://lore.kernel.org/r/4aadb3c97835f7b80f00819c3d549e6130384e67.1634365151.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mmc/host/mxs-mmc.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c
index 7125687faf76a..d7601dc5e85dc 100644
--- a/drivers/mmc/host/mxs-mmc.c
+++ b/drivers/mmc/host/mxs-mmc.c
@@ -579,6 +579,11 @@ static const struct of_device_id mxs_mmc_dt_ids[] = {
};
MODULE_DEVICE_TABLE(of, mxs_mmc_dt_ids);
+static void mxs_mmc_regulator_disable(void *regulator)
+{
+ regulator_disable(regulator);
+}
+
static int mxs_mmc_probe(struct platform_device *pdev)
{
const struct of_device_id *of_id =
@@ -622,6 +627,11 @@ static int mxs_mmc_probe(struct platform_device *pdev)
"Failed to enable vmmc regulator: %d\n", ret);
goto out_mmc_free;
}
+
+ ret = devm_add_action_or_reset(&pdev->dev, mxs_mmc_regulator_disable,
+ reg_vmmc);
+ if (ret)
+ goto out_mmc_free;
}
ssp->clk = devm_clk_get(&pdev->dev, NULL);
--
2.33.0
From: Stefan Agner <[email protected]>
[ Upstream commit 2641b62d2fab52648e34cdc6994b2eacde2d27c1 ]
Some Micrel KSZ8041NL PHY chips exhibit continuous RX errors after using
the power down mode bit (0.11). If the PHY is taken out of power down
mode in a certain temperature range, the PHY enters a weird state which
leads to continuously reporting RX errors. In that state, the MAC is not
able to receive or send any Ethernet frames and the activity LED is
constantly blinking. Since Linux is using the suspend callback when the
interface is taken down, ending up in that state can easily happen
during a normal startup.
Micrel confirmed the issue in errata DS80000700A [*], caused by abnormal
clock recovery when using power down mode. Even the latest revision (A4,
Revision ID 0x1513) seems to suffer that problem, and according to the
errata is not going to be fixed.
Remove the suspend/resume callback to avoid using the power down mode
completely.
[*] https://ww1.microchip.com/downloads/en/DeviceDoc/80000700A.pdf
Fixes: 1a5465f5d6a2 ("phy/micrel: Add suspend/resume support to Micrel PHYs")
Signed-off-by: Stefan Agner <[email protected]>
Acked-by: Marcel Ziswiler <[email protected]>
Signed-off-by: Francesco Dolcini <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/phy/micrel.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index ef5e5b621ec59..755aa67412923 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -876,8 +876,9 @@ static struct phy_driver ksphy_driver[] = {
.get_sset_count = kszphy_get_sset_count,
.get_strings = kszphy_get_strings,
.get_stats = kszphy_get_stats,
- .suspend = genphy_suspend,
- .resume = genphy_resume,
+ /* No suspend/resume callbacks because of errata DS80000700A,
+ * receiver error following software power down.
+ */
}, {
.phy_id = PHY_ID_KSZ8041RNLI,
.phy_id_mask = MICREL_PHY_ID_MASK,
--
2.33.0
From: Tetsuo Handa <[email protected]>
[ Upstream commit 0934ad42bb2c5df90a1b9de690f93de735b622fe ]
syzbot is reporting UAF at cipso_v4_doi_search() [1], for smk_cipso_doi()
is calling kfree() without removing from the cipso_v4_doi_list list after
netlbl_cfg_cipsov4_map_add() returned an error. We need to use
netlbl_cfg_cipsov4_del() in order to remove from the list and wait for
RCU grace period before kfree().
Link: https://syzkaller.appspot.com/bug?extid=93dba5b91f0fed312cbd [1]
Reported-by: syzbot <[email protected]>
Signed-off-by: Tetsuo Handa <[email protected]>
Fixes: 6c2e8ac0953fccdd ("netlabel: Update kernel configuration API")
Signed-off-by: Casey Schaufler <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
security/smack/smackfs.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/security/smack/smackfs.c b/security/smack/smackfs.c
index 9fdf404a318f9..a9c516362170a 100644
--- a/security/smack/smackfs.c
+++ b/security/smack/smackfs.c
@@ -740,7 +740,7 @@ static void smk_cipso_doi(void)
if (rc != 0) {
printk(KERN_WARNING "%s:%d map add rc = %d\n",
__func__, __LINE__, rc);
- kfree(doip);
+ netlbl_cfg_cipsov4_del(doip->doi, &nai);
return;
}
}
--
2.33.0
From: Jakub Kicinski <[email protected]>
[ Upstream commit 24bcbe1cc69fa52dc4f7b5b2456678ed464724d8 ]
sk_stream_kill_queues() can be called on close when there are
still outstanding skbs to transmit. Those skbs may try to queue
notifications to the error queue (e.g. timestamps).
If sk_stream_kill_queues() purges the queue without taking
its lock the queue may get corrupted, and skbs leaked.
This shows up as a warning about an rmem leak:
WARNING: CPU: 24 PID: 0 at net/ipv4/af_inet.c:154 inet_sock_destruct+0x...
The leak is always a multiple of 0x300 bytes (the value is in
%rax on my builds, so RAX: 0000000000000300). 0x300 is truesize of
an empty sk_buff. Indeed if we dump the socket state at the time
of the warning the sk_error_queue is often (but not always)
corrupted. The ->next pointer points back at the list head,
but not the ->prev pointer. Indeed we can find the leaked skb
by scanning the kernel memory for something that looks like
an skb with ->sk = socket in question, and ->truesize = 0x300.
The contents of ->cb[] of the skb confirms the suspicion that
it is indeed a timestamp notification (as generated in
__skb_complete_tx_timestamp()).
Removing purging of sk_error_queue should be okay, since
inet_sock_destruct() does it again once all socket refs
are gone. Eric suggests this may cause sockets that go
thru disconnect() to maintain notifications from the
previous incarnations of the socket, but that should be
okay since the race was there anyway, and disconnect()
is not exactly dependable.
Thanks to Jonathan Lemon and Omar Sandoval for help at various
stages of tracing the issue.
Fixes: cb9eff097831 ("net: new user space API for time stamping of incoming and outgoing packets")
Signed-off-by: Jakub Kicinski <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/core/stream.c | 3 ---
1 file changed, 3 deletions(-)
diff --git a/net/core/stream.c b/net/core/stream.c
index 31839fb06d88c..cbe52b1690707 100644
--- a/net/core/stream.c
+++ b/net/core/stream.c
@@ -195,9 +195,6 @@ void sk_stream_kill_queues(struct sock *sk)
/* First the read buffer. */
__skb_queue_purge(&sk->sk_receive_queue);
- /* Next, the error queue. */
- __skb_queue_purge(&sk->sk_error_queue);
-
/* Next, the write queue. */
WARN_ON(!skb_queue_empty(&sk->sk_write_queue));
--
2.33.0
From: Dan Carpenter <[email protected]>
[ Upstream commit 2203bd0e5c12ffc53ffdd4fbd7b12d6ba27e0424 ]
The msm_gem_new_impl() function cleans up after itself so there is no
need to call drm_gem_object_put(). Conceptually, it does not make sense
to call a kref_put() function until after the reference counting has
been initialized which happens immediately after this call in the
drm_gem_(private_)object_init() functions.
In the msm_gem_import() function the "obj" pointer is uninitialized, so
it will lead to a crash.
Fixes: 05b849111c07 ("drm/msm: prime support")
Signed-off-by: Dan Carpenter <[email protected]>
Link: https://lore.kernel.org/r/20211013081315.GG6010@kili
Signed-off-by: Rob Clark <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/msm/msm_gem.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/msm/msm_gem.c b/drivers/gpu/drm/msm/msm_gem.c
index b9403851f37f3..072a5f150dd61 100644
--- a/drivers/gpu/drm/msm/msm_gem.c
+++ b/drivers/gpu/drm/msm/msm_gem.c
@@ -959,7 +959,7 @@ static struct drm_gem_object *_msm_gem_new(struct drm_device *dev,
ret = msm_gem_new_impl(dev, size, flags, NULL, &obj, struct_mutex_locked);
if (ret)
- goto fail;
+ return ERR_PTR(ret);
if (use_vram) {
struct msm_gem_vma *vma;
@@ -1029,7 +1029,7 @@ struct drm_gem_object *msm_gem_import(struct drm_device *dev,
ret = msm_gem_new_impl(dev, size, MSM_BO_WC, dmabuf->resv, &obj, false);
if (ret)
- goto fail;
+ return ERR_PTR(ret);
drm_gem_private_object_init(dev, obj, size);
--
2.33.0
From: Dan Carpenter <[email protected]>
[ Upstream commit 9b793db5fca44d01f72d3564a168171acf7c4076 ]
The problem is that "channel" is an unsigned int, when it's less 5 the
value of "channel - 5" is not a negative number as one would expect but
is very high positive value instead.
This means that "start" becomes a very high positive value. The result
of that is that we never enter the "for (i = start; i <= end; i++) {"
loop. Instead of storing the result from b43legacy_radio_aci_detect()
it just uses zero.
Fixes: ef1a628d83fc ("b43: Implement dynamic PHY API")
Signed-off-by: Dan Carpenter <[email protected]>
Acked-by: Michael Büsch <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/20211006073621.GE8404@kili
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/broadcom/b43/phy_g.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/broadcom/b43/phy_g.c b/drivers/net/wireless/broadcom/b43/phy_g.c
index 822dcaa8ace63..35ff139b1496e 100644
--- a/drivers/net/wireless/broadcom/b43/phy_g.c
+++ b/drivers/net/wireless/broadcom/b43/phy_g.c
@@ -2310,7 +2310,7 @@ static u8 b43_gphy_aci_scan(struct b43_wldev *dev)
b43_phy_mask(dev, B43_PHY_G_CRS, 0x7FFF);
b43_set_all_gains(dev, 3, 8, 1);
- start = (channel - 5 > 0) ? channel - 5 : 1;
+ start = (channel > 5) ? channel - 5 : 1;
end = (channel + 5 < 14) ? channel + 5 : 13;
for (i = start; i <= end; i++) {
--
2.33.0
From: David Hildenbrand <[email protected]>
[ Upstream commit b159f94c86b43cf7e73e654bc527255b1f4eafc4 ]
... otherwise we will try unlocking a spinlock that was never locked via a
garbage pointer.
At the time we reach this code path, we usually successfully looked up
a PGSTE already; however, evil user space could have manipulated the VMA
layout in the meantime and triggered removal of the page table.
Fixes: 1e133ab296f3 ("s390/mm: split arch/s390/mm/pgtable.c")
Signed-off-by: David Hildenbrand <[email protected]>
Reviewed-by: Claudio Imbrenda <[email protected]>
Acked-by: Heiko Carstens <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Christian Borntraeger <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/s390/mm/gmap.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/arch/s390/mm/gmap.c
+++ b/arch/s390/mm/gmap.c
@@ -665,9 +665,10 @@ void __gmap_zap(struct gmap *gmap, unsig
vmaddr |= gaddr & ~PMD_MASK;
/* Get pointer to the page table entry */
ptep = get_locked_pte(gmap->mm, vmaddr, &ptl);
- if (likely(ptep))
+ if (likely(ptep)) {
ptep_zap_unused(gmap->mm, vmaddr, ptep, 0);
- pte_unmap_unlock(ptep, ptl);
+ pte_unmap_unlock(ptep, ptl);
+ }
}
}
EXPORT_SYMBOL_GPL(__gmap_zap);
From: Markus Schneider-Pargmann <[email protected]>
[ Upstream commit b6f5f0c8f72d348b2d07b20d7b680ef13a7ffe98 ]
Currently mtk_rng_runtime_suspend/resume is called for both runtime pm
and system sleep operations.
This is wrong as these should only be runtime ops as the name already
suggests. Currently freezing the system will lead to a call to
mtk_rng_runtime_suspend even if the device currently isn't active. This
leads to a clock warning because it is disabled/unprepared although it
isn't enabled/prepared currently.
This patch fixes this by only setting the runtime pm ops and forces to
call the runtime pm ops from the system sleep ops as well if active but
not otherwise.
Fixes: 81d2b34508c6 ("hwrng: mtk - add runtime PM support")
Signed-off-by: Markus Schneider-Pargmann <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/char/hw_random/mtk-rng.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/char/hw_random/mtk-rng.c b/drivers/char/hw_random/mtk-rng.c
index 8da7bcf54105f..41f7d893dfef2 100644
--- a/drivers/char/hw_random/mtk-rng.c
+++ b/drivers/char/hw_random/mtk-rng.c
@@ -181,8 +181,13 @@ static int mtk_rng_runtime_resume(struct device *dev)
return mtk_rng_init(&priv->rng);
}
-static UNIVERSAL_DEV_PM_OPS(mtk_rng_pm_ops, mtk_rng_runtime_suspend,
- mtk_rng_runtime_resume, NULL);
+static const struct dev_pm_ops mtk_rng_pm_ops = {
+ SET_RUNTIME_PM_OPS(mtk_rng_runtime_suspend,
+ mtk_rng_runtime_resume, NULL)
+ SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+ pm_runtime_force_resume)
+};
+
#define MTK_RNG_PM_OPS (&mtk_rng_pm_ops)
#else /* CONFIG_PM */
#define MTK_RNG_PM_OPS NULL
--
2.33.0
From: Giovanni Cabiddu <[email protected]>
[ Upstream commit 18fcba469ba5359c1de7e3fb16f7b9e8cd1b8e02 ]
Upon receiving a PFVF message, check if the interrupt bit is set in the
message. If it is not, that means that the interrupt was probably
triggered by a collision. In this case, disregard the message and
re-enable the interrupts.
Fixes: ed8ccaef52fa ("crypto: qat - Add support for SRIOV")
Signed-off-by: Giovanni Cabiddu <[email protected]>
Reviewed-by: Marco Chiappero <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/crypto/qat/qat_common/adf_pf2vf_msg.c | 6 ++++++
drivers/crypto/qat/qat_common/adf_vf_isr.c | 6 ++++++
2 files changed, 12 insertions(+)
diff --git a/drivers/crypto/qat/qat_common/adf_pf2vf_msg.c b/drivers/crypto/qat/qat_common/adf_pf2vf_msg.c
index 72fd2bbbe704e..180016e157771 100644
--- a/drivers/crypto/qat/qat_common/adf_pf2vf_msg.c
+++ b/drivers/crypto/qat/qat_common/adf_pf2vf_msg.c
@@ -250,6 +250,11 @@ void adf_vf2pf_req_hndl(struct adf_accel_vf_info *vf_info)
/* Read message from the VF */
msg = ADF_CSR_RD(pmisc_addr, hw_data->get_pf2vf_offset(vf_nr));
+ if (!(msg & ADF_VF2PF_INT)) {
+ dev_info(&GET_DEV(accel_dev),
+ "Spurious VF2PF interrupt, msg %X. Ignored\n", msg);
+ goto out;
+ }
/* To ACK, clear the VF2PFINT bit */
msg &= ~ADF_VF2PF_INT;
@@ -333,6 +338,7 @@ void adf_vf2pf_req_hndl(struct adf_accel_vf_info *vf_info)
if (resp && adf_iov_putmsg(accel_dev, resp, vf_nr))
dev_err(&GET_DEV(accel_dev), "Failed to send response to VF\n");
+out:
/* re-enable interrupt on PF from this VF */
adf_enable_vf2pf_interrupts(accel_dev, (1 << vf_nr));
return;
diff --git a/drivers/crypto/qat/qat_common/adf_vf_isr.c b/drivers/crypto/qat/qat_common/adf_vf_isr.c
index ef90902c8200d..86274e3c6781d 100644
--- a/drivers/crypto/qat/qat_common/adf_vf_isr.c
+++ b/drivers/crypto/qat/qat_common/adf_vf_isr.c
@@ -123,6 +123,11 @@ static void adf_pf2vf_bh_handler(void *data)
/* Read the message from PF */
msg = ADF_CSR_RD(pmisc_bar_addr, hw_data->get_pf2vf_offset(0));
+ if (!(msg & ADF_PF2VF_INT)) {
+ dev_info(&GET_DEV(accel_dev),
+ "Spurious PF2VF interrupt, msg %X. Ignored\n", msg);
+ goto out;
+ }
if (!(msg & ADF_PF2VF_MSGORIGIN_SYSTEM))
/* Ignore legacy non-system (non-kernel) PF2VF messages */
@@ -171,6 +176,7 @@ static void adf_pf2vf_bh_handler(void *data)
msg &= ~ADF_PF2VF_INT;
ADF_CSR_WR(pmisc_bar_addr, hw_data->get_pf2vf_offset(0), msg);
+out:
/* Re-enable PF2VF interrupts */
adf_enable_pf2vf_interrupts(accel_dev);
return;
--
2.33.0
From: Giovanni Cabiddu <[email protected]>
[ Upstream commit 9b768e8a3909ac1ab39ed44a3933716da7761a6f ]
Detect a PFVF collision between the local and the remote function by
checking if the message on the PFVF CSR has been overwritten.
This is done after the remote function confirms that the message has
been received, by clearing the interrupt bit, or the maximum number of
attempts (ADF_IOV_MSG_ACK_MAX_RETRY) to check the CSR has been exceeded.
Fixes: ed8ccaef52fa ("crypto: qat - Add support for SRIOV")
Signed-off-by: Giovanni Cabiddu <[email protected]>
Co-developed-by: Marco Chiappero <[email protected]>
Signed-off-by: Marco Chiappero <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/crypto/qat/qat_common/adf_pf2vf_msg.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/crypto/qat/qat_common/adf_pf2vf_msg.c b/drivers/crypto/qat/qat_common/adf_pf2vf_msg.c
index c64481160b711..72fd2bbbe704e 100644
--- a/drivers/crypto/qat/qat_common/adf_pf2vf_msg.c
+++ b/drivers/crypto/qat/qat_common/adf_pf2vf_msg.c
@@ -195,6 +195,13 @@ static int __adf_iov_putmsg(struct adf_accel_dev *accel_dev, u32 msg, u8 vf_nr)
val = ADF_CSR_RD(pmisc_bar_addr, pf2vf_offset);
} while ((val & int_bit) && (count++ < ADF_IOV_MSG_ACK_MAX_RETRY));
+ if (val != msg) {
+ dev_dbg(&GET_DEV(accel_dev),
+ "Collision - PFVF CSR overwritten by remote function\n");
+ ret = -EIO;
+ goto out;
+ }
+
if (val & int_bit) {
dev_dbg(&GET_DEV(accel_dev), "ACK not received from remote\n");
val &= ~int_bit;
--
2.33.0
From: Mark Rutland <[email protected]>
[ Upstream commit c65b52d02f6c1a06ddb20cba175ad49eccd6410d ]
As bcm6345_l1_irq_handle() is a chained irqchip handler, it will be
invoked within the context of the root irqchip handler, which must have
entered IRQ context already.
When bcm6345_l1_irq_handle() calls arch/mips's do_IRQ() , this will nest
another call to irq_enter(), and the resulting nested increment to
`rcu_data.dynticks_nmi_nesting` will cause rcu_is_cpu_rrupt_from_idle()
to fail to identify wakeups from idle, resulting in failure to preempt,
and RCU stalls.
Chained irqchip handlers must invoke IRQ handlers by way of thee core
irqchip code, i.e. generic_handle_irq() or generic_handle_domain_irq()
and should not call do_IRQ(), which is intended only for root irqchip
handlers.
Fix bcm6345_l1_irq_handle() by calling generic_handle_irq() directly.
Fixes: c7c42ec2baa1de7a ("irqchips/bmips: Add bcm6345-l1 interrupt controller")
Signed-off-by: Mark Rutland <[email protected]>
Reviewed-by: Marc Zyngier <[email protected]>
Acked-by: Thomas Bogendoerfer <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/irqchip/irq-bcm6345-l1.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/irqchip/irq-bcm6345-l1.c b/drivers/irqchip/irq-bcm6345-l1.c
index 43f8abe40878a..31ea6332ecb83 100644
--- a/drivers/irqchip/irq-bcm6345-l1.c
+++ b/drivers/irqchip/irq-bcm6345-l1.c
@@ -143,7 +143,7 @@ static void bcm6345_l1_irq_handle(struct irq_desc *desc)
for_each_set_bit(hwirq, &pending, IRQS_PER_WORD) {
irq = irq_linear_revmap(intc->domain, base + hwirq);
if (irq)
- do_IRQ(irq);
+ generic_handle_irq(irq);
else
spurious_interrupt();
}
--
2.33.0
From: Tiezhu Yang <[email protected]>
[ Upstream commit f76fbbbb5061fe14824ba5807c44bd7400a6b4e1 ]
Use the actual return value instead of always -1 if register_kretprobe()
failed.
E.g. without this patch:
# insmod samples/kprobes/kretprobe_example.ko func=no_such_func
insmod: ERROR: could not insert module samples/kprobes/kretprobe_example.ko: Operation not permitted
With this patch:
# insmod samples/kprobes/kretprobe_example.ko func=no_such_func
insmod: ERROR: could not insert module samples/kprobes/kretprobe_example.ko: Unknown symbol in module
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 804defea1c02 ("Kprobes: move kprobe examples to samples/")
Signed-off-by: Tiezhu Yang <[email protected]>
Acked-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
samples/kprobes/kretprobe_example.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/samples/kprobes/kretprobe_example.c b/samples/kprobes/kretprobe_example.c
index 7f9060f435cde..da6de5e78e1dd 100644
--- a/samples/kprobes/kretprobe_example.c
+++ b/samples/kprobes/kretprobe_example.c
@@ -83,7 +83,7 @@ static int __init kretprobe_init(void)
ret = register_kretprobe(&my_kretprobe);
if (ret < 0) {
pr_err("register_kretprobe failed, returned %d\n", ret);
- return -1;
+ return ret;
}
pr_info("Planted return probe at %s: %p\n",
my_kretprobe.kp.symbol_name, my_kretprobe.kp.addr);
--
2.33.0
From: Wang Hai <[email protected]>
[ Upstream commit 9692151e2fe7a326bafe99836fd1f20a2cc3a049 ]
I got memory leak as follows when doing fault injection test:
unreferenced object 0xffff88812c7d7400 (size 512):
comm "kworker/6:1", pid 176, jiffies 4295003332 (age 822.830s)
hex dump (first 32 bytes):
00 68 1e 04 81 88 ff ff 01 00 00 00 00 00 00 00 .h..............
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff8167939c>] slab_post_alloc_hook+0x9c/0x490
[<ffffffff8167f627>] kmem_cache_alloc_trace+0x1f7/0x470
[<ffffffffa02c9873>] if_usb_probe+0x63/0x446 [usb8xxx]
[<ffffffffa022668a>] usb_probe_interface+0x1aa/0x3c0 [usbcore]
[<ffffffff82b59630>] really_probe+0x190/0x480
[<ffffffff82b59a19>] __driver_probe_device+0xf9/0x180
[<ffffffff82b59af3>] driver_probe_device+0x53/0x130
[<ffffffff82b5a075>] __device_attach_driver+0x105/0x130
[<ffffffff82b55949>] bus_for_each_drv+0x129/0x190
[<ffffffff82b593c9>] __device_attach+0x1c9/0x270
[<ffffffff82b5a250>] device_initial_probe+0x20/0x30
[<ffffffff82b579c2>] bus_probe_device+0x142/0x160
[<ffffffff82b52e49>] device_add+0x829/0x1300
[<ffffffffa02229b1>] usb_set_configuration+0xb01/0xcc0 [usbcore]
[<ffffffffa0235c4e>] usb_generic_driver_probe+0x6e/0x90 [usbcore]
[<ffffffffa022641f>] usb_probe_device+0x6f/0x130 [usbcore]
cardp is missing being freed in the error handling path of the probe
and the path of the disconnect, which will cause memory leak.
This patch adds the missing kfree().
Fixes: 876c9d3aeb98 ("[PATCH] Marvell Libertas 8388 802.11b/g USB driver")
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Wang Hai <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/marvell/libertas/if_usb.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/wireless/marvell/libertas/if_usb.c b/drivers/net/wireless/marvell/libertas/if_usb.c
index aad82ff568835..bbfc89d9d65ab 100644
--- a/drivers/net/wireless/marvell/libertas/if_usb.c
+++ b/drivers/net/wireless/marvell/libertas/if_usb.c
@@ -288,6 +288,7 @@ err_add_card:
if_usb_reset_device(cardp);
dealloc:
if_usb_free(cardp);
+ kfree(cardp);
error:
return r;
@@ -312,6 +313,7 @@ static void if_usb_disconnect(struct usb_interface *intf)
/* Unlink and free urb */
if_usb_free(cardp);
+ kfree(cardp);
usb_set_intfdata(intf, NULL);
usb_put_dev(interface_to_usbdev(intf));
--
2.33.0
From: Shyam Sundar S K <[email protected]>
[ Upstream commit daf182d360e509a494db18666799f4e85d83dda0 ]
For each rate change command submission, the FW has to do a phy
power off sequence internally. For this to happen correctly, the
PLL re-initialization control setting has to be turned off before
sending mailbox commands and re-enabled once the command submission
is complete.
Without the PLL control setting, the link up takes longer time in a
fixed phy configuration.
Fixes: 47f164deab22 ("amd-xgbe: Add PCI device support")
Co-developed-by: Sudheesh Mavila <[email protected]>
Signed-off-by: Sudheesh Mavila <[email protected]>
Signed-off-by: Shyam Sundar S K <[email protected]>
Acked-by: Tom Lendacky <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/amd/xgbe/xgbe-common.h | 8 ++++++++
drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c | 20 +++++++++++++++++++-
2 files changed, 27 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-common.h b/drivers/net/ethernet/amd/xgbe/xgbe-common.h
index b2cd3bdba9f89..533b8519ec352 100644
--- a/drivers/net/ethernet/amd/xgbe/xgbe-common.h
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-common.h
@@ -1331,6 +1331,10 @@
#define MDIO_VEND2_PMA_CDR_CONTROL 0x8056
#endif
+#ifndef MDIO_VEND2_PMA_MISC_CTRL0
+#define MDIO_VEND2_PMA_MISC_CTRL0 0x8090
+#endif
+
#ifndef MDIO_CTRL1_SPEED1G
#define MDIO_CTRL1_SPEED1G (MDIO_CTRL1_SPEED10G & ~BMCR_SPEED100)
#endif
@@ -1389,6 +1393,10 @@
#define XGBE_PMA_RX_RST_0_RESET_ON 0x10
#define XGBE_PMA_RX_RST_0_RESET_OFF 0x00
+#define XGBE_PMA_PLL_CTRL_MASK BIT(15)
+#define XGBE_PMA_PLL_CTRL_ENABLE BIT(15)
+#define XGBE_PMA_PLL_CTRL_DISABLE 0x0000
+
/* Bit setting and getting macros
* The get macro will extract the current bit field value from within
* the variable
diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c b/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
index bb6f0dcea6eab..4a4370a470fd1 100644
--- a/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
@@ -1803,12 +1803,26 @@ static void xgbe_phy_rx_reset(struct xgbe_prv_data *pdata)
}
}
+static void xgbe_phy_pll_ctrl(struct xgbe_prv_data *pdata, bool enable)
+{
+ XMDIO_WRITE_BITS(pdata, MDIO_MMD_PMAPMD, MDIO_VEND2_PMA_MISC_CTRL0,
+ XGBE_PMA_PLL_CTRL_MASK,
+ enable ? XGBE_PMA_PLL_CTRL_ENABLE
+ : XGBE_PMA_PLL_CTRL_DISABLE);
+
+ /* Wait for command to complete */
+ usleep_range(100, 200);
+}
+
static void xgbe_phy_perform_ratechange(struct xgbe_prv_data *pdata,
unsigned int cmd, unsigned int sub_cmd)
{
unsigned int s0 = 0;
unsigned int wait;
+ /* Disable PLL re-initialization during FW command processing */
+ xgbe_phy_pll_ctrl(pdata, false);
+
/* Log if a previous command did not complete */
if (XP_IOREAD_BITS(pdata, XP_DRIVER_INT_RO, STATUS)) {
netif_dbg(pdata, link, pdata->netdev,
@@ -1829,7 +1843,7 @@ static void xgbe_phy_perform_ratechange(struct xgbe_prv_data *pdata,
wait = XGBE_RATECHANGE_COUNT;
while (wait--) {
if (!XP_IOREAD_BITS(pdata, XP_DRIVER_INT_RO, STATUS))
- return;
+ goto reenable_pll;
usleep_range(1000, 2000);
}
@@ -1839,6 +1853,10 @@ static void xgbe_phy_perform_ratechange(struct xgbe_prv_data *pdata,
/* Reset on error */
xgbe_phy_rx_reset(pdata);
+
+reenable_pll:
+ /* Enable PLL re-initialization */
+ xgbe_phy_pll_ctrl(pdata, true);
}
static void xgbe_phy_rrc(struct xgbe_prv_data *pdata)
--
2.33.0
From: Russell King (Oracle) <[email protected]>
[ Upstream commit fd8d9731bcdfb22d28e45bce789bcb211c868c78 ]
mvneta does not support asymetric pause modes, and it flags this by the
lack of AsymPause in the supported field. When setting pause modes, we
check that pause->rx_pause == pause->tx_pause, but only when pause
autoneg is enabled. When pause autoneg is disabled, we still allow
pause->rx_pause != pause->tx_pause, which is incorrect when the MAC
does not support asymetric pause, and causes mvneta to issue a warning.
Fix this by removing the test for pause->autoneg, so we always check
that pause->rx_pause == pause->tx_pause for network devices that do not
support AsymPause.
Fixes: 9525ae83959b ("phylink: add phylink infrastructure")
Signed-off-by: Russell King (Oracle) <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/phy/phylink.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 17acecfda5420..89d8efe8753e5 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -1022,7 +1022,7 @@ int phylink_ethtool_set_pauseparam(struct phylink *pl,
return -EOPNOTSUPP;
if (!phylink_test(pl->supported, Asym_Pause) &&
- !pause->autoneg && pause->rx_pause != pause->tx_pause)
+ pause->rx_pause != pause->tx_pause)
return -EINVAL;
config->pause &= ~(MLO_PAUSE_AN | MLO_PAUSE_TXRX_MASK);
--
2.33.0
From: Pavel Skripkin <[email protected]>
[ Upstream commit afae4ef7d5ad913cab1316137854a36bea6268a5 ]
Syzbot reported ununit-value bug in az6027_rc_query(). The problem was
in missing state pointer initialization. Since this function does nothing
we can simply initialize state to REMOTE_NO_KEY_PRESSED.
Reported-and-tested-by: [email protected]
Fixes: 76f9a820c867 ("V4L/DVB: AZ6027: Initial import of the driver")
Signed-off-by: Pavel Skripkin <[email protected]>
Signed-off-by: Sean Young <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/usb/dvb-usb/az6027.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/media/usb/dvb-usb/az6027.c b/drivers/media/usb/dvb-usb/az6027.c
index 2e711362847e4..382c8075ef524 100644
--- a/drivers/media/usb/dvb-usb/az6027.c
+++ b/drivers/media/usb/dvb-usb/az6027.c
@@ -394,6 +394,7 @@ static struct rc_map_table rc_map_az6027_table[] = {
/* remote control stuff (does not work with my box) */
static int az6027_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
{
+ *state = REMOTE_NO_KEY_PRESSED;
return 0;
}
--
2.33.0
From: Christophe JAILLET <[email protected]>
[ Upstream commit 2143ad413c05c7be24c3a92760e367b7f6aaac92 ]
A successful 'clk_prepare()' call should be balanced by a corresponding
'clk_unprepare()' call in the error handling path of the probe, as already
done in the remove function.
Update the error handling path accordingly.
Fixes: 3003a180ef6b ("[media] VPU: mediatek: support Mediatek VPU")
Signed-off-by: Christophe JAILLET <[email protected]>
Reviewed-by: Houlong Wei <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/platform/mtk-vpu/mtk_vpu.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/media/platform/mtk-vpu/mtk_vpu.c b/drivers/media/platform/mtk-vpu/mtk_vpu.c
index 853d598937f69..019a5e7e1a402 100644
--- a/drivers/media/platform/mtk-vpu/mtk_vpu.c
+++ b/drivers/media/platform/mtk-vpu/mtk_vpu.c
@@ -817,7 +817,8 @@ static int mtk_vpu_probe(struct platform_device *pdev)
vpu->wdt.wq = create_singlethread_workqueue("vpu_wdt");
if (!vpu->wdt.wq) {
dev_err(dev, "initialize wdt workqueue failed\n");
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto clk_unprepare;
}
INIT_WORK(&vpu->wdt.ws, vpu_wdt_reset_func);
mutex_init(&vpu->vpu_mutex);
@@ -916,6 +917,8 @@ disable_vpu_clk:
vpu_clock_disable(vpu);
workqueue_destroy:
destroy_workqueue(vpu->wdt.wq);
+clk_unprepare:
+ clk_unprepare(vpu->clk);
return ret;
}
--
2.33.0
From: Kees Cook <[email protected]>
[ Upstream commit 2908249f3878a591f7918368fdf0b7b0a6c3158c ]
The "card" string only holds 31 characters (and the terminating NUL).
In order to avoid truncation, use a shorter card description instead of
the current result, "Silicon Labs Si470x FM Radio Re".
Suggested-by: Hans Verkuil <[email protected]>
Fixes: 78656acdcf48 ("V4L/DVB (7038): USB radio driver for Silicon Labs Si470x FM Radio Receivers")
Fixes: cc35bbddfe10 ("V4L/DVB (12416): radio-si470x: add i2c driver for si470x")
Signed-off-by: Kees Cook <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/radio/si470x/radio-si470x-i2c.c | 2 +-
drivers/media/radio/si470x/radio-si470x-usb.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/media/radio/si470x/radio-si470x-i2c.c b/drivers/media/radio/si470x/radio-si470x-i2c.c
index 5275356143429..7e7fa23e17961 100644
--- a/drivers/media/radio/si470x/radio-si470x-i2c.c
+++ b/drivers/media/radio/si470x/radio-si470x-i2c.c
@@ -20,7 +20,7 @@
/* driver definitions */
#define DRIVER_AUTHOR "Joonyoung Shim <[email protected]>";
-#define DRIVER_CARD "Silicon Labs Si470x FM Radio Receiver"
+#define DRIVER_CARD "Silicon Labs Si470x FM Radio"
#define DRIVER_DESC "I2C radio driver for Si470x FM Radio Receivers"
#define DRIVER_VERSION "1.0.2"
diff --git a/drivers/media/radio/si470x/radio-si470x-usb.c b/drivers/media/radio/si470x/radio-si470x-usb.c
index aec528f52ca12..95581a8476191 100644
--- a/drivers/media/radio/si470x/radio-si470x-usb.c
+++ b/drivers/media/radio/si470x/radio-si470x-usb.c
@@ -25,7 +25,7 @@
/* driver definitions */
#define DRIVER_AUTHOR "Tobias Lorenz <[email protected]>"
-#define DRIVER_CARD "Silicon Labs Si470x FM Radio Receiver"
+#define DRIVER_CARD "Silicon Labs Si470x FM Radio"
#define DRIVER_DESC "USB radio driver for Si470x FM Radio Receivers"
#define DRIVER_VERSION "1.0.10"
--
2.33.0
From: Wang Hai <[email protected]>
[ Upstream commit d549107305b4634c81223a853701c06bcf657bc3 ]
I got memory leak as follows when doing fault injection test:
unreferenced object 0xffff88810a2ddc00 (size 512):
comm "kworker/6:1", pid 176, jiffies 4295009893 (age 757.220s)
hex dump (first 32 bytes):
00 50 05 18 81 88 ff ff 00 00 00 00 00 00 00 00 .P..............
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff8167939c>] slab_post_alloc_hook+0x9c/0x490
[<ffffffff8167f627>] kmem_cache_alloc_trace+0x1f7/0x470
[<ffffffffa02a1530>] if_usb_probe+0x60/0x37c [libertas_tf_usb]
[<ffffffffa022668a>] usb_probe_interface+0x1aa/0x3c0 [usbcore]
[<ffffffff82b59630>] really_probe+0x190/0x480
[<ffffffff82b59a19>] __driver_probe_device+0xf9/0x180
[<ffffffff82b59af3>] driver_probe_device+0x53/0x130
[<ffffffff82b5a075>] __device_attach_driver+0x105/0x130
[<ffffffff82b55949>] bus_for_each_drv+0x129/0x190
[<ffffffff82b593c9>] __device_attach+0x1c9/0x270
[<ffffffff82b5a250>] device_initial_probe+0x20/0x30
[<ffffffff82b579c2>] bus_probe_device+0x142/0x160
[<ffffffff82b52e49>] device_add+0x829/0x1300
[<ffffffffa02229b1>] usb_set_configuration+0xb01/0xcc0 [usbcore]
[<ffffffffa0235c4e>] usb_generic_driver_probe+0x6e/0x90 [usbcore]
[<ffffffffa022641f>] usb_probe_device+0x6f/0x130 [usbcore]
cardp is missing being freed in the error handling path of the probe
and the path of the disconnect, which will cause memory leak.
This patch adds the missing kfree().
Fixes: c305a19a0d0a ("libertas_tf: usb specific functions")
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Wang Hai <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/marvell/libertas_tf/if_usb.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/wireless/marvell/libertas_tf/if_usb.c b/drivers/net/wireless/marvell/libertas_tf/if_usb.c
index cae95362efd5b..ddc5f0de09606 100644
--- a/drivers/net/wireless/marvell/libertas_tf/if_usb.c
+++ b/drivers/net/wireless/marvell/libertas_tf/if_usb.c
@@ -234,6 +234,7 @@ static int if_usb_probe(struct usb_interface *intf,
dealloc:
if_usb_free(cardp);
+ kfree(cardp);
error:
lbtf_deb_leave(LBTF_DEB_MAIN);
return -ENOMEM;
@@ -258,6 +259,7 @@ static void if_usb_disconnect(struct usb_interface *intf)
/* Unlink and free urb */
if_usb_free(cardp);
+ kfree(cardp);
usb_set_intfdata(intf, NULL);
usb_put_dev(interface_to_usbdev(intf));
--
2.33.0
From: Sven Schnelle <[email protected]>
[ Upstream commit 66e29fcda1824f0427966fbee2bd2c85bf362c82 ]
With idle polling, IPIs are not sent when a CPU idle, but queued
and run later from do_idle(). The default kgdb_call_nmi_hook()
implementation gets the pointer to struct pt_regs from get_irq_reqs(),
which doesn't work in that case because it was not called from the
IPI interrupt handler. Fix it by defining our own kgdb_roundup()
function which sents an IPI_ENTER_KGDB. When that IPI is received
on the target CPU kgdb_nmicallback() is called.
Signed-off-by: Sven Schnelle <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/parisc/kernel/smp.c | 19 +++++++++++++++++--
1 file changed, 17 insertions(+), 2 deletions(-)
diff --git a/arch/parisc/kernel/smp.c b/arch/parisc/kernel/smp.c
index ab4d5580bb02b..45e3aadcecd2f 100644
--- a/arch/parisc/kernel/smp.c
+++ b/arch/parisc/kernel/smp.c
@@ -32,6 +32,7 @@
#include <linux/bitops.h>
#include <linux/ftrace.h>
#include <linux/cpu.h>
+#include <linux/kgdb.h>
#include <linux/atomic.h>
#include <asm/current.h>
@@ -74,7 +75,10 @@ enum ipi_message_type {
IPI_CALL_FUNC,
IPI_CPU_START,
IPI_CPU_STOP,
- IPI_CPU_TEST
+ IPI_CPU_TEST,
+#ifdef CONFIG_KGDB
+ IPI_ENTER_KGDB,
+#endif
};
@@ -170,7 +174,12 @@ ipi_interrupt(int irq, void *dev_id)
case IPI_CPU_TEST:
smp_debug(100, KERN_DEBUG "CPU%d is alive!\n", this_cpu);
break;
-
+#ifdef CONFIG_KGDB
+ case IPI_ENTER_KGDB:
+ smp_debug(100, KERN_DEBUG "CPU%d ENTER_KGDB\n", this_cpu);
+ kgdb_nmicallback(raw_smp_processor_id(), get_irq_regs());
+ break;
+#endif
default:
printk(KERN_CRIT "Unknown IPI num on CPU%d: %lu\n",
this_cpu, which);
@@ -226,6 +235,12 @@ send_IPI_allbutself(enum ipi_message_type op)
}
}
+#ifdef CONFIG_KGDB
+void kgdb_roundup_cpus(void)
+{
+ send_IPI_allbutself(IPI_ENTER_KGDB);
+}
+#endif
inline void
smp_send_stop(void) { send_IPI_allbutself(IPI_CPU_STOP); }
--
2.33.0
From: Colin Ian King <[email protected]>
[ Upstream commit 7266dda2f1dfe151b12ef0c14eb4d4e622fb211c ]
Currently a call to snd_card_new that fails will set card with a NULL
pointer, this causes a null pointer dereference on the error cleanup
path when card it passed to snd_card_free. Fix this by adding a new
error exit path that does not call snd_card_free and exiting via this
new path.
Addresses-Coverity: ("Explicit null dereference")
Fixes: 9e44d63246a9 ("[media] cx23885: Add ALSA support")
Signed-off-by: Colin Ian King <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/pci/cx23885/cx23885-alsa.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/media/pci/cx23885/cx23885-alsa.c b/drivers/media/pci/cx23885/cx23885-alsa.c
index d8c3637e492e3..a7f34af6c65b0 100644
--- a/drivers/media/pci/cx23885/cx23885-alsa.c
+++ b/drivers/media/pci/cx23885/cx23885-alsa.c
@@ -560,7 +560,7 @@ struct cx23885_audio_dev *cx23885_audio_register(struct cx23885_dev *dev)
SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1,
THIS_MODULE, sizeof(struct cx23885_audio_dev), &card);
if (err < 0)
- goto error;
+ goto error_msg;
chip = (struct cx23885_audio_dev *) card->private_data;
chip->dev = dev;
@@ -586,6 +586,7 @@ struct cx23885_audio_dev *cx23885_audio_register(struct cx23885_dev *dev)
error:
snd_card_free(card);
+error_msg:
pr_err("%s(): Failed to register analog audio adapter\n",
__func__);
--
2.33.0
From: Christophe JAILLET <[email protected]>
[ Upstream commit 986b5094708e508baa452a23ffe809870934a7df ]
If an error occurs after a successful tegra_powergate_enable_clocks()
call, it must be undone by a tegra_powergate_disable_clocks() call, as
already done in the below and above error handling paths of this function.
Update the 'goto' to branch at the correct place of the error handling
path.
Fixes: a38045121bf4 ("soc/tegra: pmc: Add generic PM domain support")
Signed-off-by: Christophe JAILLET <[email protected]>
Reviewed-by: Jon Hunter <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/soc/tegra/pmc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/soc/tegra/pmc.c b/drivers/soc/tegra/pmc.c
index 2422ed56895af..71f4ff3e13b46 100644
--- a/drivers/soc/tegra/pmc.c
+++ b/drivers/soc/tegra/pmc.c
@@ -407,7 +407,7 @@ static int tegra_powergate_power_up(struct tegra_powergate *pg,
err = tegra_powergate_reset_deassert(pg);
if (err)
- goto powergate_off;
+ goto disable_clks;
usleep_range(10, 20);
--
2.33.0
From: Yang Yingliang <[email protected]>
[ Upstream commit ca9b8f56ec089d3a436050afefd17b7237301f47 ]
Fix the missing clk_disable_unprepare() before return
from bcm_qspi_probe() in the error handling case.
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Yang Yingliang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/spi/spi-bcm-qspi.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/spi/spi-bcm-qspi.c b/drivers/spi/spi-bcm-qspi.c
index 11adc2c13a74c..298b1dd463800 100644
--- a/drivers/spi/spi-bcm-qspi.c
+++ b/drivers/spi/spi-bcm-qspi.c
@@ -1301,7 +1301,7 @@ int bcm_qspi_probe(struct platform_device *pdev,
&qspi->dev_ids[val]);
if (ret < 0) {
dev_err(&pdev->dev, "IRQ %s not found\n", name);
- goto qspi_probe_err;
+ goto qspi_unprepare_err;
}
qspi->dev_ids[val].dev = qspi;
@@ -1316,7 +1316,7 @@ int bcm_qspi_probe(struct platform_device *pdev,
if (!num_ints) {
dev_err(&pdev->dev, "no IRQs registered, cannot init driver\n");
ret = -EINVAL;
- goto qspi_probe_err;
+ goto qspi_unprepare_err;
}
/*
@@ -1367,6 +1367,7 @@ int bcm_qspi_probe(struct platform_device *pdev,
qspi_reg_err:
bcm_qspi_hw_uninit(qspi);
+qspi_unprepare_err:
clk_disable_unprepare(qspi->clk);
qspi_probe_err:
kfree(qspi->dev_ids);
--
2.33.0
From: Sukadev Bhattiprolu <[email protected]>
[ Upstream commit 6e20d00158f31f7631d68b86996b7e951c4451c8 ]
Soon after registering a CRQ it is possible that we get a fail over or
maybe a CRQ_INIT from the VIOS while interrupts were disabled.
Look for any such CRQs after enabling interrupts.
Otherwise we can intermittently fail to bring up ibmvnic adapters during
boot, specially in kexec/kdump kernels.
Fixes: 032c5e82847a ("Driver for IBM System i/p VNIC protocol")
Reported-by: Vaishnavi Bhat <[email protected]>
Signed-off-by: Sukadev Bhattiprolu <[email protected]>
Reviewed-by: Dany Madden <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/ibm/ibmvnic.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c
index 76ab6c0d40cf5..4befc885efb8d 100644
--- a/drivers/net/ethernet/ibm/ibmvnic.c
+++ b/drivers/net/ethernet/ibm/ibmvnic.c
@@ -3835,6 +3835,9 @@ static int init_crq_queue(struct ibmvnic_adapter *adapter)
crq->cur = 0;
spin_lock_init(&crq->lock);
+ /* process any CRQs that were queued before we enabled interrupts */
+ tasklet_schedule(&adapter->tasklet);
+
return retrc;
req_irq_failed:
--
2.33.0
From: Andy Shevchenko <[email protected]>
[ Upstream commit ebabb77a2a115b6c5e68f7364b598310b5f61fb2 ]
ACPI_PTR() is more harmful than helpful. For example, in this case
if CONFIG_ACPI=n, the ID table left unused which is not what we want.
Instead of adding ifdeffery here and there, drop ACPI_PTR().
Fixes: 6a7320c4669f ("serial: 8250_dw: Add ACPI 5.0 support")
Reported-by: Daniel Palmer <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/tty/serial/8250/8250_dw.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index 4ca46aa64699d..8db5883803c9a 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -683,7 +683,7 @@ static struct platform_driver dw8250_platform_driver = {
.name = "dw-apb-uart",
.pm = &dw8250_pm_ops,
.of_match_table = dw8250_of_match,
- .acpi_match_table = ACPI_PTR(dw8250_acpi_match),
+ .acpi_match_table = dw8250_acpi_match,
},
.probe = dw8250_probe,
.remove = dw8250_remove,
--
2.33.0
From: Dongliang Mu <[email protected]>
[ Upstream commit 4ed2f3545c2e5acfbccd7f85fea5b1a82e9862d7 ]
The error handling code of fsl_ifc_ctrl_probe is problematic. When
fsl_ifc_ctrl_init fails or request_irq of fsl_ifc_ctrl_dev->irq fails,
it forgets to free the irq and nand_irq. Meanwhile, if request_irq of
fsl_ifc_ctrl_dev->nand_irq fails, it will still free nand_irq even if
the request_irq is not successful.
Fix this by refactoring the error handling code.
Fixes: d2ae2e20fbdd ("driver/memory:Move Freescale IFC driver to a common driver")
Signed-off-by: Dongliang Mu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/memory/fsl_ifc.c | 13 ++++++-------
1 file changed, 6 insertions(+), 7 deletions(-)
diff --git a/drivers/memory/fsl_ifc.c b/drivers/memory/fsl_ifc.c
index 38b945eb410f3..9c0e70b047c39 100644
--- a/drivers/memory/fsl_ifc.c
+++ b/drivers/memory/fsl_ifc.c
@@ -276,7 +276,7 @@ static int fsl_ifc_ctrl_probe(struct platform_device *dev)
ret = fsl_ifc_ctrl_init(fsl_ifc_ctrl_dev);
if (ret < 0)
- goto err;
+ goto err_unmap_nandirq;
init_waitqueue_head(&fsl_ifc_ctrl_dev->nand_wait);
@@ -285,7 +285,7 @@ static int fsl_ifc_ctrl_probe(struct platform_device *dev)
if (ret != 0) {
dev_err(&dev->dev, "failed to install irq (%d)\n",
fsl_ifc_ctrl_dev->irq);
- goto err_irq;
+ goto err_unmap_nandirq;
}
if (fsl_ifc_ctrl_dev->nand_irq) {
@@ -294,17 +294,16 @@ static int fsl_ifc_ctrl_probe(struct platform_device *dev)
if (ret != 0) {
dev_err(&dev->dev, "failed to install irq (%d)\n",
fsl_ifc_ctrl_dev->nand_irq);
- goto err_nandirq;
+ goto err_free_irq;
}
}
return 0;
-err_nandirq:
- free_irq(fsl_ifc_ctrl_dev->nand_irq, fsl_ifc_ctrl_dev);
- irq_dispose_mapping(fsl_ifc_ctrl_dev->nand_irq);
-err_irq:
+err_free_irq:
free_irq(fsl_ifc_ctrl_dev->irq, fsl_ifc_ctrl_dev);
+err_unmap_nandirq:
+ irq_dispose_mapping(fsl_ifc_ctrl_dev->nand_irq);
irq_dispose_mapping(fsl_ifc_ctrl_dev->irq);
err:
iounmap(fsl_ifc_ctrl_dev->gregs);
--
2.33.0
From: Christophe Leroy <[email protected]>
[ Upstream commit f2719b26ae27282c145202ffd656d5ff1fe737cc ]
While investigating a lockup at startup on Powerbook 3400C, it was
identified that the fbdev driver generates alignment exception at
startup:
--- interrupt: 600 at memset+0x60/0xc0
NIP: c0021414 LR: c03fc49c CTR: 00007fff
REGS: ca021c10 TRAP: 0600 Tainted: G W (5.14.2-pmac-00727-g12a41fa69492)
MSR: 00009032 <EE,ME,IR,DR,RI> CR: 44008442 XER: 20000100
DAR: cab80020 DSISR: 00017c07
GPR00: 00000007 ca021cd0 c14412e0 cab80000 00000000 00100000 cab8001c 00000004
GPR08: 00100000 00007fff 00000000 00000000 84008442 00000000 c0006fb4 00000000
GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00100000
GPR24: 00000000 81800000 00000320 c15fa400 c14d1878 00000000 c14d1800 c094e19c
NIP [c0021414] memset+0x60/0xc0
LR [c03fc49c] chipsfb_pci_init+0x160/0x580
--- interrupt: 600
[ca021cd0] [c03fc46c] chipsfb_pci_init+0x130/0x580 (unreliable)
[ca021d20] [c03a3a70] pci_device_probe+0xf8/0x1b8
[ca021d50] [c043d584] really_probe.part.0+0xac/0x388
[ca021d70] [c043d914] __driver_probe_device+0xb4/0x170
[ca021d90] [c043da18] driver_probe_device+0x48/0x144
[ca021dc0] [c043e318] __driver_attach+0x11c/0x1c4
[ca021de0] [c043ad30] bus_for_each_dev+0x88/0xf0
[ca021e10] [c043c724] bus_add_driver+0x190/0x22c
[ca021e40] [c043ee94] driver_register+0x9c/0x170
[ca021e60] [c0006c28] do_one_initcall+0x54/0x1ec
[ca021ed0] [c08246e4] kernel_init_freeable+0x1c0/0x270
[ca021f10] [c0006fdc] kernel_init+0x28/0x11c
[ca021f30] [c0017148] ret_from_kernel_thread+0x14/0x1c
Instruction dump:
7d4601a4 39490777 7d4701a4 39490888 7d4801a4 39490999 7d4901a4 39290aaa
7d2a01a4 4c00012c 4bfffe88 0fe00000 <4bfffe80> 9421fff0 38210010 48001970
This is due to 'dcbz' instruction being used on non-cached memory.
'dcbz' instruction is used by memset() to zeroize a complete
cacheline at once, and memset() is not expected to be used on non
cached memory.
When performing a 'sparse' check on fbdev driver, it also appears
that the use of memset() is unexpected:
drivers/video/fbdev/chipsfb.c:334:17: warning: incorrect type in argument 1 (different address spaces)
drivers/video/fbdev/chipsfb.c:334:17: expected void *
drivers/video/fbdev/chipsfb.c:334:17: got char [noderef] __iomem *screen_base
drivers/video/fbdev/chipsfb.c:334:15: warning: memset with byte count of 1048576
Use fb_memset() instead of memset(). fb_memset() is defined as
memset_io() for powerpc.
Fixes: 8c8709334cec ("[PATCH] ppc32: Remove CONFIG_PMAC_PBOOK")
Reported-by: Stan Johnson <[email protected]>
Signed-off-by: Christophe Leroy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/884a54f1e5cb774c1d9b4db780209bee5d4f6718.1631712563.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/video/fbdev/chipsfb.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/video/fbdev/chipsfb.c b/drivers/video/fbdev/chipsfb.c
index f9b366d175875..413b465e69d8e 100644
--- a/drivers/video/fbdev/chipsfb.c
+++ b/drivers/video/fbdev/chipsfb.c
@@ -332,7 +332,7 @@ static const struct fb_var_screeninfo chipsfb_var = {
static void init_chips(struct fb_info *p, unsigned long addr)
{
- memset(p->screen_base, 0, 0x100000);
+ fb_memset(p->screen_base, 0, 0x100000);
p->fix = chipsfb_fix;
p->fix.smem_start = addr;
--
2.33.0
From: Anel Orazgaliyeva <[email protected]>
[ Upstream commit e5f5a66c9aa9c331da5527c2e3fd9394e7091e01 ]
Commit c343bf1ba5ef ("cpuidle: Fix three reference count leaks")
fixes the cleanup of kobjects; however, it removes kfree() calls
altogether, leading to memory leaks.
Fix those and also defer the initialization of dev->kobj_dev until
after the error check, so that we do not end up with a dangling
pointer.
Fixes: c343bf1ba5ef ("cpuidle: Fix three reference count leaks")
Signed-off-by: Anel Orazgaliyeva <[email protected]>
Suggested-by: Aman Priyadarshi <[email protected]>
[ rjw: Subject edits ]
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/cpuidle/sysfs.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/cpuidle/sysfs.c b/drivers/cpuidle/sysfs.c
index 909bd2255978b..a29d7a6e68487 100644
--- a/drivers/cpuidle/sysfs.c
+++ b/drivers/cpuidle/sysfs.c
@@ -415,6 +415,7 @@ static int cpuidle_add_state_sysfs(struct cpuidle_device *device)
&kdev->kobj, "state%d", i);
if (ret) {
kobject_put(&kobj->kobj);
+ kfree(kobj);
goto error_state;
}
kobject_uevent(&kobj->kobj, KOBJ_ADD);
@@ -545,6 +546,7 @@ static int cpuidle_add_driver_sysfs(struct cpuidle_device *dev)
&kdev->kobj, "driver");
if (ret) {
kobject_put(&kdrv->kobj);
+ kfree(kdrv);
return ret;
}
@@ -631,7 +633,6 @@ int cpuidle_add_sysfs(struct cpuidle_device *dev)
if (!kdev)
return -ENOMEM;
kdev->dev = dev;
- dev->kobj_dev = kdev;
init_completion(&kdev->kobj_unregister);
@@ -639,9 +640,11 @@ int cpuidle_add_sysfs(struct cpuidle_device *dev)
"cpuidle");
if (error) {
kobject_put(&kdev->kobj);
+ kfree(kdev);
return error;
}
+ dev->kobj_dev = kdev;
kobject_uevent(&kdev->kobj, KOBJ_ADD);
return 0;
--
2.33.0
From: Dan Carpenter <[email protected]>
[ Upstream commit 68e7c510fdf4f6167404609da52e1979165649f6 ]
Return an error code if usb_get_function() fails. Don't return success.
Fixes: 4bc8a33f2407 ("usb: gadget: hid: convert to new interface of f_hid")
Acked-by: Felipe Balbi <[email protected]>
Signed-off-by: Dan Carpenter <[email protected]>
Link: https://lore.kernel.org/r/20211011123739.GC15188@kili
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/gadget/legacy/hid.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/gadget/legacy/hid.c b/drivers/usb/gadget/legacy/hid.c
index cccbb948821b2..a55d3761d777c 100644
--- a/drivers/usb/gadget/legacy/hid.c
+++ b/drivers/usb/gadget/legacy/hid.c
@@ -103,8 +103,10 @@ static int do_config(struct usb_configuration *c)
list_for_each_entry(e, &hidg_func_list, node) {
e->f = usb_get_function(e->fi);
- if (IS_ERR(e->f))
+ if (IS_ERR(e->f)) {
+ status = PTR_ERR(e->f);
goto put;
+ }
status = usb_add_function(c, e->f);
if (status < 0) {
usb_put_function(e->f);
--
2.33.0
From: Jakob Hauser <[email protected]>
[ Upstream commit bf895295e9a73411889816f1a0c1f4f1a2d9c678 ]
Currently the rt5033_battery driver provides voltage values in mV. It
should be µV as stated in Documentation/power/power_supply_class.rst.
Fixes: b847dd96e659 ("power: rt5033_battery: Add RT5033 Fuel gauge device driver")
Cc: Beomho Seo <[email protected]>
Cc: Chanwoo Choi <[email protected]>
Signed-off-by: Jakob Hauser <[email protected]>
Signed-off-by: Sebastian Reichel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/power/supply/rt5033_battery.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/power/supply/rt5033_battery.c b/drivers/power/supply/rt5033_battery.c
index 9310b85f3405e..7eec7014086d8 100644
--- a/drivers/power/supply/rt5033_battery.c
+++ b/drivers/power/supply/rt5033_battery.c
@@ -63,7 +63,7 @@ static int rt5033_battery_get_watt_prop(struct i2c_client *client,
regmap_read(battery->regmap, regh, &msb);
regmap_read(battery->regmap, regl, &lsb);
- ret = ((msb << 4) + (lsb >> 4)) * 1250 / 1000;
+ ret = ((msb << 4) + (lsb >> 4)) * 1250;
return ret;
}
--
2.33.0
From: Dan Carpenter <[email protected]>
[ Upstream commit f4875d509a0a78ad294a1a538d534b5ba94e685a ]
This variable is just a temporary variable, used to do an endian
conversion. The problem is that the last byte is not initialized. After
the conversion is completely done, the last byte is discarded so it doesn't
cause a problem. But static checkers and the KMSan runtime checker can
detect the uninitialized read and will complain about it.
Link: https://lore.kernel.org/r/20211006073242.GA8404@kili
Fixes: 5036f0a0ecd3 ("[SCSI] csiostor: Fix sparse warnings.")
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/csiostor/csio_lnode.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/scsi/csiostor/csio_lnode.c b/drivers/scsi/csiostor/csio_lnode.c
index 957767d383610..d1df694d9ed00 100644
--- a/drivers/scsi/csiostor/csio_lnode.c
+++ b/drivers/scsi/csiostor/csio_lnode.c
@@ -611,7 +611,7 @@ csio_ln_vnp_read_cbfn(struct csio_hw *hw, struct csio_mb *mbp)
struct fc_els_csp *csp;
struct fc_els_cssp *clsp;
enum fw_retval retval;
- __be32 nport_id;
+ __be32 nport_id = 0;
retval = FW_CMD_RETVAL_G(ntohl(rsp->alloc_to_len16));
if (retval != FW_SUCCESS) {
--
2.33.0
From: Richard Fitzgerald <[email protected]>
[ Upstream commit d591d4b32aa9552af14a0c7c586a2d3fe9ecc6e0 ]
Some registers had wrong default values in cs42l42_reg_defaults[].
Signed-off-by: Richard Fitzgerald <[email protected]>
Fixes: 2c394ca79604 ("ASoC: Add support for CS42L42 codec")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/codecs/cs42l42.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/sound/soc/codecs/cs42l42.c b/sound/soc/codecs/cs42l42.c
index e6eeecc5446ef..a341c5b08434b 100644
--- a/sound/soc/codecs/cs42l42.c
+++ b/sound/soc/codecs/cs42l42.c
@@ -95,7 +95,7 @@ static const struct reg_default cs42l42_reg_defaults[] = {
{ CS42L42_ASP_RX_INT_MASK, 0x1F },
{ CS42L42_ASP_TX_INT_MASK, 0x0F },
{ CS42L42_CODEC_INT_MASK, 0x03 },
- { CS42L42_SRCPL_INT_MASK, 0xFF },
+ { CS42L42_SRCPL_INT_MASK, 0x7F },
{ CS42L42_VPMON_INT_MASK, 0x01 },
{ CS42L42_PLL_LOCK_INT_MASK, 0x01 },
{ CS42L42_TSRS_PLUG_INT_MASK, 0x0F },
@@ -132,7 +132,7 @@ static const struct reg_default cs42l42_reg_defaults[] = {
{ CS42L42_MIXER_CHA_VOL, 0x3F },
{ CS42L42_MIXER_ADC_VOL, 0x3F },
{ CS42L42_MIXER_CHB_VOL, 0x3F },
- { CS42L42_EQ_COEF_IN0, 0x22 },
+ { CS42L42_EQ_COEF_IN0, 0x00 },
{ CS42L42_EQ_COEF_IN1, 0x00 },
{ CS42L42_EQ_COEF_IN2, 0x00 },
{ CS42L42_EQ_COEF_IN3, 0x00 },
--
2.33.0
From: Leon Romanovsky <[email protected]>
[ Upstream commit f4e56ec4452f48b8292dcf0e1c4bdac83506fb8b ]
The error flow fixed in this patch is not possible because all kernel
users of create QP interface check that device supports steering before
set IB_QP_CREATE_NETIF_QP flag.
Fixes: c1c98501121e ("IB/mlx4: Add support for steerable IB UD QPs")
Link: https://lore.kernel.org/r/91c61f6e60eb0240f8bbc321fda7a1d2986dd03c.1634023677.git.leonro@nvidia.com
Reported-by: Dan Carpenter <[email protected]>
Signed-off-by: Leon Romanovsky <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/hw/mlx4/qp.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/infiniband/hw/mlx4/qp.c b/drivers/infiniband/hw/mlx4/qp.c
index df1ecd29057f8..8862eb9a6fe43 100644
--- a/drivers/infiniband/hw/mlx4/qp.c
+++ b/drivers/infiniband/hw/mlx4/qp.c
@@ -1144,8 +1144,10 @@ static int create_qp_common(struct mlx4_ib_dev *dev, struct ib_pd *pd,
if (dev->steering_support ==
MLX4_STEERING_MODE_DEVICE_MANAGED)
qp->flags |= MLX4_IB_QP_NETIF;
- else
+ else {
+ err = -EINVAL;
goto err;
+ }
}
memcpy(&backup_cap, &init_attr->cap, sizeof(backup_cap));
--
2.33.0
From: Anssi Hannula <[email protected]>
[ Upstream commit 88b20f84f0fe47409342669caf3e58a3fc64c316 ]
xilinx_uartps .start_tx() clears TXEMPTY when enabling TXEMPTY to avoid
any previous TXEVENT event asserting the UART interrupt. This clear
operation is done immediately after filling the TX FIFO.
However, if the bytes inserted by cdns_uart_handle_tx() are consumed by
the UART before the TXEMPTY is cleared, the clear operation eats the new
TXEMPTY event as well, causing cdns_uart_isr() to never receive the
TXEMPTY event. If there are bytes still queued in circbuf, TX will get
stuck as they will never get transferred to FIFO (unless new bytes are
queued to circbuf in which case .start_tx() is called again).
While the racy missed TXEMPTY occurs fairly often with short data
sequences (e.g. write 1 byte), in those cases circbuf is usually empty
so no action on TXEMPTY would have been needed anyway. On the other
hand, longer data sequences make the race much more unlikely as UART
takes longer to consume the TX FIFO. Therefore it is rare for this race
to cause visible issues in general.
Fix the race by clearing the TXEMPTY bit in ISR *before* filling the
FIFO.
The TXEMPTY bit in ISR will only get asserted at the exact moment the
TX FIFO *becomes* empty, so clearing the bit before filling FIFO does
not cause an extra immediate assertion even if the FIFO is initially
empty.
This is hard to reproduce directly on a normal system, but inserting
e.g. udelay(200) after cdns_uart_handle_tx(port), setting 4000000 baud,
and then running "dd if=/dev/zero bs=128 of=/dev/ttyPS0 count=50"
reliably reproduces the issue on my ZynqMP test system unless this fix
is applied.
Fixes: 85baf542d54e ("tty: xuartps: support 64 byte FIFO size")
Signed-off-by: Anssi Hannula <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/tty/serial/xilinx_uartps.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
index 00a740b8ad273..cdd81c28893a0 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -595,9 +595,10 @@ static void cdns_uart_start_tx(struct uart_port *port)
if (uart_circ_empty(&port->state->xmit))
return;
+ writel(CDNS_UART_IXR_TXEMPTY, port->membase + CDNS_UART_ISR);
+
cdns_uart_handle_tx(port);
- writel(CDNS_UART_IXR_TXEMPTY, port->membase + CDNS_UART_ISR);
/* Enable the TX Empty interrupt */
writel(CDNS_UART_IXR_TXEMPTY, port->membase + CDNS_UART_IER);
}
--
2.33.0
From: Geert Uytterhoeven <[email protected]>
[ Upstream commit 18b8f5b6fc53d097cadb94a93d8d6566ba88e389 ]
mips_cm_error_report() extracts the cause and other cause from the error
register using shifts. This works fine for the former, as it is stored
in the top bits, and the shift will thus remove all non-related bits.
However, the latter is stored in the bottom bits, hence thus needs masking
to get rid of non-related bits. Without such masking, using it as an
index into the cm2_causes[] array will lead to an out-of-bounds access,
probably causing a crash.
Fix this by using FIELD_GET() instead. Bite the bullet and convert all
MIPS CM handling to the bitfield API, to improve readability and safety.
Fixes: 3885c2b463f6a236 ("MIPS: CM: Add support for reporting CM cache errors")
Signed-off-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Jiaxun Yang <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/mips/include/asm/mips-cm.h | 12 ++++++------
arch/mips/kernel/mips-cm.c | 21 ++++++++++-----------
2 files changed, 16 insertions(+), 17 deletions(-)
diff --git a/arch/mips/include/asm/mips-cm.h b/arch/mips/include/asm/mips-cm.h
index 8bc5df49b0e1d..890e51b159e06 100644
--- a/arch/mips/include/asm/mips-cm.h
+++ b/arch/mips/include/asm/mips-cm.h
@@ -15,6 +15,7 @@
#ifndef __MIPS_ASM_MIPS_CM_H__
#define __MIPS_ASM_MIPS_CM_H__
+#include <linux/bitfield.h>
#include <linux/bitops.h>
#include <linux/errno.h>
@@ -157,8 +158,8 @@ GCR_ACCESSOR_RO(32, 0x030, rev)
#define CM_GCR_REV_MINOR GENMASK(7, 0)
#define CM_ENCODE_REV(major, minor) \
- (((major) << __ffs(CM_GCR_REV_MAJOR)) | \
- ((minor) << __ffs(CM_GCR_REV_MINOR)))
+ (FIELD_PREP(CM_GCR_REV_MAJOR, major) | \
+ FIELD_PREP(CM_GCR_REV_MINOR, minor))
#define CM_REV_CM2 CM_ENCODE_REV(6, 0)
#define CM_REV_CM2_5 CM_ENCODE_REV(7, 0)
@@ -366,10 +367,10 @@ static inline int mips_cm_revision(void)
static inline unsigned int mips_cm_max_vp_width(void)
{
extern int smp_num_siblings;
- uint32_t cfg;
if (mips_cm_revision() >= CM_REV_CM3)
- return read_gcr_sys_config2() & CM_GCR_SYS_CONFIG2_MAXVPW;
+ return FIELD_GET(CM_GCR_SYS_CONFIG2_MAXVPW,
+ read_gcr_sys_config2());
if (mips_cm_present()) {
/*
@@ -377,8 +378,7 @@ static inline unsigned int mips_cm_max_vp_width(void)
* number of VP(E)s, and if that ever changes then this will
* need revisiting.
*/
- cfg = read_gcr_cl_config() & CM_GCR_Cx_CONFIG_PVPE;
- return (cfg >> __ffs(CM_GCR_Cx_CONFIG_PVPE)) + 1;
+ return FIELD_GET(CM_GCR_Cx_CONFIG_PVPE, read_gcr_cl_config()) + 1;
}
if (IS_ENABLED(CONFIG_SMP))
diff --git a/arch/mips/kernel/mips-cm.c b/arch/mips/kernel/mips-cm.c
index 50d3d74001cbe..51cfcb44e6703 100644
--- a/arch/mips/kernel/mips-cm.c
+++ b/arch/mips/kernel/mips-cm.c
@@ -183,8 +183,7 @@ static void mips_cm_probe_l2sync(void)
phys_addr_t addr;
/* L2-only sync was introduced with CM major revision 6 */
- major_rev = (read_gcr_rev() & CM_GCR_REV_MAJOR) >>
- __ffs(CM_GCR_REV_MAJOR);
+ major_rev = FIELD_GET(CM_GCR_REV_MAJOR, read_gcr_rev());
if (major_rev < 6)
return;
@@ -267,13 +266,13 @@ void mips_cm_lock_other(unsigned int cluster, unsigned int core,
preempt_disable();
if (cm_rev >= CM_REV_CM3) {
- val = core << __ffs(CM3_GCR_Cx_OTHER_CORE);
- val |= vp << __ffs(CM3_GCR_Cx_OTHER_VP);
+ val = FIELD_PREP(CM3_GCR_Cx_OTHER_CORE, core) |
+ FIELD_PREP(CM3_GCR_Cx_OTHER_VP, vp);
if (cm_rev >= CM_REV_CM3_5) {
val |= CM_GCR_Cx_OTHER_CLUSTER_EN;
- val |= cluster << __ffs(CM_GCR_Cx_OTHER_CLUSTER);
- val |= block << __ffs(CM_GCR_Cx_OTHER_BLOCK);
+ val |= FIELD_PREP(CM_GCR_Cx_OTHER_CLUSTER, cluster);
+ val |= FIELD_PREP(CM_GCR_Cx_OTHER_BLOCK, block);
} else {
WARN_ON(cluster != 0);
WARN_ON(block != CM_GCR_Cx_OTHER_BLOCK_LOCAL);
@@ -303,7 +302,7 @@ void mips_cm_lock_other(unsigned int cluster, unsigned int core,
spin_lock_irqsave(&per_cpu(cm_core_lock, curr_core),
per_cpu(cm_core_lock_flags, curr_core));
- val = core << __ffs(CM_GCR_Cx_OTHER_CORENUM);
+ val = FIELD_PREP(CM_GCR_Cx_OTHER_CORENUM, core);
}
write_gcr_cl_other(val);
@@ -347,8 +346,8 @@ void mips_cm_error_report(void)
cm_other = read_gcr_error_mult();
if (revision < CM_REV_CM3) { /* CM2 */
- cause = cm_error >> __ffs(CM_GCR_ERROR_CAUSE_ERRTYPE);
- ocause = cm_other >> __ffs(CM_GCR_ERROR_MULT_ERR2ND);
+ cause = FIELD_GET(CM_GCR_ERROR_CAUSE_ERRTYPE, cm_error);
+ ocause = FIELD_GET(CM_GCR_ERROR_MULT_ERR2ND, cm_other);
if (!cause)
return;
@@ -390,8 +389,8 @@ void mips_cm_error_report(void)
ulong core_id_bits, vp_id_bits, cmd_bits, cmd_group_bits;
ulong cm3_cca_bits, mcp_bits, cm3_tr_bits, sched_bit;
- cause = cm_error >> __ffs64(CM3_GCR_ERROR_CAUSE_ERRTYPE);
- ocause = cm_other >> __ffs(CM_GCR_ERROR_MULT_ERR2ND);
+ cause = FIELD_GET(CM3_GCR_ERROR_CAUSE_ERRTYPE, cm_error);
+ ocause = FIELD_GET(CM_GCR_ERROR_MULT_ERR2ND, cm_other);
if (!cause)
return;
--
2.33.0
From: Waiman Long <[email protected]>
[ Upstream commit 7ee285395b211cad474b2b989db52666e0430daf ]
It was found that the following warning was displayed when remounting
controllers from cgroup v2 to v1:
[ 8042.997778] WARNING: CPU: 88 PID: 80682 at kernel/cgroup/cgroup.c:3130 cgroup_apply_control_disable+0x158/0x190
:
[ 8043.091109] RIP: 0010:cgroup_apply_control_disable+0x158/0x190
[ 8043.096946] Code: ff f6 45 54 01 74 39 48 8d 7d 10 48 c7 c6 e0 46 5a a4 e8 7b 67 33 00 e9 41 ff ff ff 49 8b 84 24 e8 01 00 00 0f b7 40 08 eb 95 <0f> 0b e9 5f ff ff ff 48 83 c4 08 5b 5d 41 5c 41 5d 41 5e 41 5f c3
[ 8043.115692] RSP: 0018:ffffba8a47c23d28 EFLAGS: 00010202
[ 8043.120916] RAX: 0000000000000036 RBX: ffffffffa624ce40 RCX: 000000000000181a
[ 8043.128047] RDX: ffffffffa63c43e0 RSI: ffffffffa63c43e0 RDI: ffff9d7284ee1000
[ 8043.135180] RBP: ffff9d72874c5800 R08: ffffffffa624b090 R09: 0000000000000004
[ 8043.142314] R10: ffffffffa624b080 R11: 0000000000002000 R12: ffff9d7284ee1000
[ 8043.149447] R13: ffff9d7284ee1000 R14: ffffffffa624ce70 R15: ffffffffa6269e20
[ 8043.156576] FS: 00007f7747cff740(0000) GS:ffff9d7a5fc00000(0000) knlGS:0000000000000000
[ 8043.164663] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 8043.170409] CR2: 00007f7747e96680 CR3: 0000000887d60001 CR4: 00000000007706e0
[ 8043.177539] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 8043.184673] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 8043.191804] PKRU: 55555554
[ 8043.194517] Call Trace:
[ 8043.196970] rebind_subsystems+0x18c/0x470
[ 8043.201070] cgroup_setup_root+0x16c/0x2f0
[ 8043.205177] cgroup1_root_to_use+0x204/0x2a0
[ 8043.209456] cgroup1_get_tree+0x3e/0x120
[ 8043.213384] vfs_get_tree+0x22/0xb0
[ 8043.216883] do_new_mount+0x176/0x2d0
[ 8043.220550] __x64_sys_mount+0x103/0x140
[ 8043.224474] do_syscall_64+0x38/0x90
[ 8043.228063] entry_SYSCALL_64_after_hwframe+0x44/0xae
It was caused by the fact that rebind_subsystem() disables
controllers to be rebound one by one. If more than one disabled
controllers are originally from the default hierarchy, it means that
cgroup_apply_control_disable() will be called multiple times for the
same default hierarchy. A controller may be killed by css_kill() in
the first round. In the second round, the killed controller may not be
completely dead yet leading to the warning.
To avoid this problem, we collect all the ssid's of controllers that
needed to be disabled from the default hierarchy and then disable them
in one go instead of one by one.
Fixes: 334c3679ec4b ("cgroup: reimplement rebind_subsystems() using cgroup_apply_control() and friends")
Signed-off-by: Waiman Long <[email protected]>
Signed-off-by: Tejun Heo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/cgroup/cgroup.c | 31 +++++++++++++++++++++++++++----
1 file changed, 27 insertions(+), 4 deletions(-)
diff --git a/kernel/cgroup/cgroup.c b/kernel/cgroup/cgroup.c
index 99783685f3d90..d5044ca33bd0b 100644
--- a/kernel/cgroup/cgroup.c
+++ b/kernel/cgroup/cgroup.c
@@ -1599,6 +1599,7 @@ int rebind_subsystems(struct cgroup_root *dst_root, u16 ss_mask)
struct cgroup *dcgrp = &dst_root->cgrp;
struct cgroup_subsys *ss;
int ssid, i, ret;
+ u16 dfl_disable_ss_mask = 0;
lockdep_assert_held(&cgroup_mutex);
@@ -1615,8 +1616,28 @@ int rebind_subsystems(struct cgroup_root *dst_root, u16 ss_mask)
/* can't move between two non-dummy roots either */
if (ss->root != &cgrp_dfl_root && dst_root != &cgrp_dfl_root)
return -EBUSY;
+
+ /*
+ * Collect ssid's that need to be disabled from default
+ * hierarchy.
+ */
+ if (ss->root == &cgrp_dfl_root)
+ dfl_disable_ss_mask |= 1 << ssid;
+
} while_each_subsys_mask();
+ if (dfl_disable_ss_mask) {
+ struct cgroup *scgrp = &cgrp_dfl_root.cgrp;
+
+ /*
+ * Controllers from default hierarchy that need to be rebound
+ * are all disabled together in one go.
+ */
+ cgrp_dfl_root.subsys_mask &= ~dfl_disable_ss_mask;
+ WARN_ON(cgroup_apply_control(scgrp));
+ cgroup_finalize_control(scgrp, 0);
+ }
+
do_each_subsys_mask(ss, ssid, ss_mask) {
struct cgroup_root *src_root = ss->root;
struct cgroup *scgrp = &src_root->cgrp;
@@ -1625,10 +1646,12 @@ int rebind_subsystems(struct cgroup_root *dst_root, u16 ss_mask)
WARN_ON(!css || cgroup_css(dcgrp, ss));
- /* disable from the source */
- src_root->subsys_mask &= ~(1 << ssid);
- WARN_ON(cgroup_apply_control(scgrp));
- cgroup_finalize_control(scgrp, 0);
+ if (src_root != &cgrp_dfl_root) {
+ /* disable from the source */
+ src_root->subsys_mask &= ~(1 << ssid);
+ WARN_ON(cgroup_apply_control(scgrp));
+ cgroup_finalize_control(scgrp, 0);
+ }
/* rebind */
RCU_INIT_POINTER(scgrp->subsys[ssid], NULL);
--
2.33.0
From: Hans de Goede <[email protected]>
[ Upstream commit cdf10ffe8f626d8a2edc354abf063df0078b2d71 ]
When registering the IRQ handler fails, do not just return the error code,
this will free the devm_kzalloc()-ed data struct while leaving the queued
work queued and the registered power_supply registered with both of them
now pointing to free-ed memory, resulting in various kernel crashes
soon afterwards.
Instead properly tear-down things on IRQ handler register errors.
Fixes: 703df6c09795 ("power: bq27xxx_battery: Reorganize I2C into a module")
Cc: Andrew F. Davis <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Signed-off-by: Sebastian Reichel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/power/supply/bq27xxx_battery_i2c.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/power/supply/bq27xxx_battery_i2c.c b/drivers/power/supply/bq27xxx_battery_i2c.c
index 0b11ed472f338..12ffe62caa17b 100644
--- a/drivers/power/supply/bq27xxx_battery_i2c.c
+++ b/drivers/power/supply/bq27xxx_battery_i2c.c
@@ -195,7 +195,8 @@ static int bq27xxx_battery_i2c_probe(struct i2c_client *client,
dev_err(&client->dev,
"Unable to register IRQ %d error %d\n",
client->irq, ret);
- return ret;
+ bq27xxx_battery_teardown(di);
+ goto err_failed;
}
}
--
2.33.0
From: Arnaud Pouliquen <[email protected]>
[ Upstream commit 537d3af1bee8ad1415fda9b622d1ea6d1ae76dfa ]
According to the description of the rpmsg_create_ept in rpmsg_core.c
the function should return NULL on error.
Fixes: 2c8a57088045 ("rpmsg: Provide function stubs for API")
Signed-off-by: Arnaud Pouliquen <[email protected]>
Reviewed-by: Mathieu Poirier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/linux/rpmsg.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/linux/rpmsg.h b/include/linux/rpmsg.h
index 10d6ae8bbb7df..1ab79e8dc0b8f 100644
--- a/include/linux/rpmsg.h
+++ b/include/linux/rpmsg.h
@@ -202,7 +202,7 @@ static inline struct rpmsg_endpoint *rpmsg_create_ept(struct rpmsg_device *rpdev
/* This shouldn't be possible */
WARN_ON(1);
- return ERR_PTR(-ENXIO);
+ return NULL;
}
static inline int rpmsg_send(struct rpmsg_endpoint *ept, void *data, int len)
--
2.33.0
From: Tom Rix <[email protected]>
[ Upstream commit d108370c644b153382632b3e5511ade575c91c86 ]
clang static analysis reports this representative problem:
label.c:1463:16: warning: Assigned value is garbage or undefined
label->hname = name;
^ ~~~~
In aa_update_label_name(), this the problem block of code
if (aa_label_acntsxprint(&name, ...) == -1)
return res;
On failure, aa_label_acntsxprint() has a more complicated return
that just -1. So check for a negative return.
It was also noted that the aa_label_acntsxprint() main comment refers
to a nonexistent parameter, so clean up the comment.
Fixes: f1bd904175e8 ("apparmor: add the base fns() for domain labels")
Signed-off-by: Tom Rix <[email protected]>
Reviewed-by: Nick Desaulniers <[email protected]>
Signed-off-by: John Johansen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
security/apparmor/label.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/security/apparmor/label.c b/security/apparmor/label.c
index 212a0f39ddae8..4e5450dee28a3 100644
--- a/security/apparmor/label.c
+++ b/security/apparmor/label.c
@@ -1431,7 +1431,7 @@ bool aa_update_label_name(struct aa_ns *ns, struct aa_label *label, gfp_t gfp)
if (label->hname || labels_ns(label) != ns)
return res;
- if (aa_label_acntsxprint(&name, ns, label, FLAGS_NONE, gfp) == -1)
+ if (aa_label_acntsxprint(&name, ns, label, FLAGS_NONE, gfp) < 0)
return res;
ls = labels_set(label);
@@ -1681,7 +1681,7 @@ int aa_label_asxprint(char **strp, struct aa_ns *ns, struct aa_label *label,
/**
* aa_label_acntsxprint - allocate a __counted string buffer and print label
- * @strp: buffer to write to. (MAY BE NULL if @size == 0)
+ * @strp: buffer to write to.
* @ns: namespace profile is being viewed from
* @label: label to view (NOT NULL)
* @flags: flags controlling what label info is printed
--
2.33.0
From: Marek Behún <[email protected]>
[ Upstream commit 464de7e7fff767e87429cd7be09c4f2cb50a6ccb ]
Use dev_dbg() instead of dev_err() in advk_pcie_check_pio_status().
For example CRS is not an error status, it just says that the request
should be retried.
Link: https://lore.kernel.org/r/[email protected]
Fixes: 8c39d710363c1 ("PCI: aardvark: Add Aardvark PCI host controller driver")
Signed-off-by: Marek Behún <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pci/host/pci-aardvark.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/pci/host/pci-aardvark.c b/drivers/pci/host/pci-aardvark.c
index a77c422170bd2..a572b2fb7af81 100644
--- a/drivers/pci/host/pci-aardvark.c
+++ b/drivers/pci/host/pci-aardvark.c
@@ -448,7 +448,7 @@ static int advk_pcie_check_pio_status(struct advk_pcie *pcie, u32 *val)
else
str_posted = "Posted";
- dev_err(dev, "%s PIO Response Status: %s, %#x @ %#x\n",
+ dev_dbg(dev, "%s PIO Response Status: %s, %#x @ %#x\n",
str_posted, strcomp_status, reg, advk_readl(pcie, PIO_ADDR_LS));
return -EFAULT;
--
2.33.0
From: Trond Myklebust <[email protected]>
[ Upstream commit 64a93dbf25d3a1368bb58ddf0f61d0a92d7479e3 ]
Partially revert commit 2ce209c42c01 ("NFS: Wait for requests that are
locked on the commit list"), since it can lead to deadlocks between
commit requests and nfs_join_page_group().
For now we should assume that any locked requests on the commit list are
either about to be removed and committed by another task, or the writes
they describe are about to be retransmitted. In either case, we should
not need to worry.
Fixes: 2ce209c42c01 ("NFS: Wait for requests that are locked on the commit list")
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/nfs/write.c | 17 ++---------------
1 file changed, 2 insertions(+), 15 deletions(-)
diff --git a/fs/nfs/write.c b/fs/nfs/write.c
index 767e46c09074b..010733c8bdcd3 100644
--- a/fs/nfs/write.c
+++ b/fs/nfs/write.c
@@ -1037,25 +1037,11 @@ nfs_scan_commit_list(struct list_head *src, struct list_head *dst,
struct nfs_page *req, *tmp;
int ret = 0;
-restart:
list_for_each_entry_safe(req, tmp, src, wb_list) {
kref_get(&req->wb_kref);
if (!nfs_lock_request(req)) {
- int status;
-
- /* Prevent deadlock with nfs_lock_and_join_requests */
- if (!list_empty(dst)) {
- nfs_release_request(req);
- continue;
- }
- /* Ensure we make progress to prevent livelock */
- mutex_unlock(&NFS_I(cinfo->inode)->commit_mutex);
- status = nfs_wait_on_request(req);
nfs_release_request(req);
- mutex_lock(&NFS_I(cinfo->inode)->commit_mutex);
- if (status < 0)
- break;
- goto restart;
+ continue;
}
nfs_request_remove_commit_list(req, cinfo);
clear_bit(PG_COMMIT_TO_DS, &req->wb_flags);
@@ -1904,6 +1890,7 @@ static int __nfs_commit_inode(struct inode *inode, int how,
int may_wait = how & FLUSH_SYNC;
int ret, nscan;
+ how &= ~FLUSH_SYNC;
nfs_init_cinfo_from_inode(&cinfo, inode);
nfs_commit_begin(cinfo.mds);
for (;;) {
--
2.33.0
From: Jia-Ju Bai <[email protected]>
[ Upstream commit 4c2b46c824a78fc8190d8eafaaea5a9078fe7479 ]
When op_alloc() returns NULL to new_op, no error return code of
orangefs_revalidate_lookup() is assigned.
To fix this bug, ret is assigned with -ENOMEM in this case.
Fixes: 8bb8aefd5afb ("OrangeFS: Change almost all instances of the string PVFS2 to OrangeFS.")
Reported-by: TOTE Robot <[email protected]>
Signed-off-by: Jia-Ju Bai <[email protected]>
Signed-off-by: Mike Marshall <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/orangefs/dcache.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/fs/orangefs/dcache.c b/fs/orangefs/dcache.c
index ae782df5c063e..f764f4ba2411c 100644
--- a/fs/orangefs/dcache.c
+++ b/fs/orangefs/dcache.c
@@ -26,8 +26,10 @@ static int orangefs_revalidate_lookup(struct dentry *dentry)
gossip_debug(GOSSIP_DCACHE_DEBUG, "%s: attempting lookup.\n", __func__);
new_op = op_alloc(ORANGEFS_VFS_OP_LOOKUP);
- if (!new_op)
+ if (!new_op) {
+ ret = -ENOMEM;
goto out_put_parent;
+ }
new_op->upcall.req.lookup.sym_follow = ORANGEFS_LOOKUP_LINK_NO_FOLLOW;
new_op->upcall.req.lookup.parent_refn = parent->refn;
--
2.33.0
From: Alex Xu (Hello71) <[email protected]>
[ Upstream commit 7be28bd73f23e53d6e7f5fe891ba9503fc0c7210 ]
drivers/gpu/drm/drm_plane_helper.c: In function 'drm_primary_helper_update':
drivers/gpu/drm/drm_plane_helper.c:113:32: error: 'visible' is used uninitialized [-Werror=uninitialized]
113 | struct drm_plane_state plane_state = {
| ^~~~~~~~~~~
drivers/gpu/drm/drm_plane_helper.c:178:14: note: 'visible' was declared here
178 | bool visible;
| ^~~~~~~
cc1: all warnings being treated as errors
visible is an output, not an input. in practice this use might turn out
OK but it's still UB.
Fixes: df86af9133b4 ("drm/plane-helper: Add drm_plane_helper_check_state()")
Reviewed-by: Simon Ser <[email protected]>
Signed-off-by: Alex Xu (Hello71) <[email protected]>
Signed-off-by: Simon Ser <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/drm_plane_helper.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/gpu/drm/drm_plane_helper.c b/drivers/gpu/drm/drm_plane_helper.c
index 06aee1741e96a..6d57bc01b531f 100644
--- a/drivers/gpu/drm/drm_plane_helper.c
+++ b/drivers/gpu/drm/drm_plane_helper.c
@@ -243,7 +243,6 @@ int drm_plane_helper_check_update(struct drm_plane *plane,
.crtc_w = drm_rect_width(dst),
.crtc_h = drm_rect_height(dst),
.rotation = rotation,
- .visible = *visible,
};
int ret;
--
2.33.0
From: Baptiste Lepers <[email protected]>
[ Upstream commit a2915fa06227b056a8f9b0d79b61dca08ad5cfc6 ]
_nfs4_pnfs_v3/v4_ds_connect do
some work
smp_wmb
ds->ds_clp = clp;
And nfs4_ff_layout_prepare_ds currently does
smp_rmb
if(ds->ds_clp)
...
This patch places the smp_rmb after the if. This ensures that following
reads only happen once nfs4_ff_layout_prepare_ds has checked that data
has been properly initialized.
Fixes: d67ae825a59d6 ("pnfs/flexfiles: Add the FlexFile Layout Driver")
Signed-off-by: Baptiste Lepers <[email protected]>
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/nfs/flexfilelayout/flexfilelayoutdev.c | 4 ++--
fs/nfs/pnfs_nfs.c | 4 ++--
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/fs/nfs/flexfilelayout/flexfilelayoutdev.c b/fs/nfs/flexfilelayout/flexfilelayoutdev.c
index 2464b9b806988..17dee8fd9834f 100644
--- a/fs/nfs/flexfilelayout/flexfilelayoutdev.c
+++ b/fs/nfs/flexfilelayout/flexfilelayoutdev.c
@@ -428,10 +428,10 @@ nfs4_ff_layout_prepare_ds(struct pnfs_layout_segment *lseg, u32 ds_idx,
goto out_fail;
ds = mirror->mirror_ds->ds;
+ if (READ_ONCE(ds->ds_clp))
+ goto out;
/* matching smp_wmb() in _nfs4_pnfs_v3/4_ds_connect */
smp_rmb();
- if (ds->ds_clp)
- goto out;
/* FIXME: For now we assume the server sent only one version of NFS
* to use for the DS.
diff --git a/fs/nfs/pnfs_nfs.c b/fs/nfs/pnfs_nfs.c
index 29bdf1525d82b..5d7a69ffaaa29 100644
--- a/fs/nfs/pnfs_nfs.c
+++ b/fs/nfs/pnfs_nfs.c
@@ -635,7 +635,7 @@ static int _nfs4_pnfs_v3_ds_connect(struct nfs_server *mds_srv,
}
smp_wmb();
- ds->ds_clp = clp;
+ WRITE_ONCE(ds->ds_clp, clp);
dprintk("%s [new] addr: %s\n", __func__, ds->ds_remotestr);
out:
return status;
@@ -708,7 +708,7 @@ static int _nfs4_pnfs_v4_ds_connect(struct nfs_server *mds_srv,
}
smp_wmb();
- ds->ds_clp = clp;
+ WRITE_ONCE(ds->ds_clp, clp);
dprintk("%s [new] addr: %s\n", __func__, ds->ds_remotestr);
out:
return status;
--
2.33.0
From: Junji Wei <[email protected]>
[ Upstream commit dcd3f985b20ffcc375f82ca0ca9f241c7025eb5e ]
The port->attr.port_cap_flags should be set to enum
ib_port_capability_mask_bits in ib_mad.h, not
RDMA_CORE_CAP_PROT_ROCE_UDP_ENCAP.
Fixes: 8700e3e7c485 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Junji Wei <[email protected]>
Reviewed-by: Leon Romanovsky <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/sw/rxe/rxe_param.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/infiniband/sw/rxe/rxe_param.h b/drivers/infiniband/sw/rxe/rxe_param.h
index 1b596fbbe2516..77ac3fa756c25 100644
--- a/drivers/infiniband/sw/rxe/rxe_param.h
+++ b/drivers/infiniband/sw/rxe/rxe_param.h
@@ -143,7 +143,7 @@ enum rxe_port_param {
RXE_PORT_MAX_MTU = IB_MTU_4096,
RXE_PORT_ACTIVE_MTU = IB_MTU_256,
RXE_PORT_GID_TBL_LEN = 1024,
- RXE_PORT_PORT_CAP_FLAGS = RDMA_CORE_CAP_PROT_ROCE_UDP_ENCAP,
+ RXE_PORT_PORT_CAP_FLAGS = IB_PORT_CM_SUP,
RXE_PORT_MAX_MSG_SZ = 0x800000,
RXE_PORT_BAD_PKEY_CNTR = 0,
RXE_PORT_QKEY_VIOL_CNTR = 0,
--
2.33.0
From: Peter Rosin <[email protected]>
[ Upstream commit dcdbc335a91a26e022a803e1a6b837266989c032 ]
This went unnoticed until commit 7897b071ac3b ("net: macb: convert
to phylink") which tickled the problem. The sama5d3 emac has never
been capable of rgmii, and it all just happened to work before that
commit.
Fixes: 21dd0ece34c2 ("ARM: dts: at91: add devicetree for the Axentia TSE-850")
Signed-off-by: Peter Rosin <[email protected]>
Signed-off-by: Nicolas Ferre <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/at91-tse850-3.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/at91-tse850-3.dts b/arch/arm/boot/dts/at91-tse850-3.dts
index 4ef80a703eda3..d31a4e633fb4a 100644
--- a/arch/arm/boot/dts/at91-tse850-3.dts
+++ b/arch/arm/boot/dts/at91-tse850-3.dts
@@ -267,7 +267,7 @@
&macb1 {
status = "okay";
- phy-mode = "rgmii";
+ phy-mode = "rmii";
#address-cells = <1>;
#size-cells = <0>;
--
2.33.0
From: Florian Westphal <[email protected]>
[ Upstream commit 5648b5e1169ff1d6d6a46c35c0b5fbebd2a5cbb2 ]
On 64bit platforms the MAC header is set to 0xffff on allocation and
also when a helper like skb_unset_mac_header() is called.
dev_parse_header may call skb_mac_header() which assumes valid mac offset:
BUG: KASAN: use-after-free in eth_header_parse+0x75/0x90
Read of size 6 at addr ffff8881075a5c05 by task nf-queue/1364
Call Trace:
memcpy+0x20/0x60
eth_header_parse+0x75/0x90
__nfqnl_enqueue_packet+0x1a61/0x3380
__nf_queue+0x597/0x1300
nf_queue+0xf/0x40
nf_hook_slow+0xed/0x190
nf_hook+0x184/0x440
ip_output+0x1c0/0x2a0
nf_reinject+0x26f/0x700
nfqnl_recv_verdict+0xa16/0x18b0
nfnetlink_rcv_msg+0x506/0xe70
The existing code only works if the skb has a mac header.
Fixes: 2c38de4c1f8da7 ("netfilter: fix looped (broad|multi)cast's MAC handling")
Signed-off-by: Florian Westphal <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/netfilter/nfnetlink_queue.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/netfilter/nfnetlink_queue.c b/net/netfilter/nfnetlink_queue.c
index 02bbc2f9f1f1e..13e67eb75d841 100644
--- a/net/netfilter/nfnetlink_queue.c
+++ b/net/netfilter/nfnetlink_queue.c
@@ -543,7 +543,7 @@ nfqnl_build_packet_message(struct net *net, struct nfqnl_instance *queue,
goto nla_put_failure;
if (indev && entskb->dev &&
- entskb->mac_header != entskb->network_header) {
+ skb_mac_header_was_set(entskb)) {
struct nfqnl_msg_packet_hw phw;
int len;
--
2.33.0
From: Tong Zhang <[email protected]>
[ Upstream commit cbd9a3347c757383f3d2b50cf7cfd03eb479c481 ]
dc395x_init_one()->adapter_init() might fail. In this case, the acb is
already cleaned up by adapter_init(), no need to do that in
adapter_uninit(acb) again.
[ 1.252251] dc395x: adapter init failed
[ 1.254900] RIP: 0010:adapter_uninit+0x94/0x170 [dc395x]
[ 1.260307] Call Trace:
[ 1.260442] dc395x_init_one.cold+0x72a/0x9bb [dc395x]
Link: https://lore.kernel.org/r/[email protected]
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reviewed-by: Finn Thain <[email protected]>
Signed-off-by: Tong Zhang <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/dc395x.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/scsi/dc395x.c b/drivers/scsi/dc395x.c
index 830b2d2dcf206..8490d0ff04ca7 100644
--- a/drivers/scsi/dc395x.c
+++ b/drivers/scsi/dc395x.c
@@ -4809,6 +4809,7 @@ static int dc395x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
/* initialise the adapter and everything we need */
if (adapter_init(acb, io_port_base, io_port_len, irq)) {
dprintkl(KERN_INFO, "adapter init failed\n");
+ acb = NULL;
goto fail;
}
--
2.33.0
From: Jackie Liu <[email protected]>
[ Upstream commit 7f3b3c2bfa9c93ab9b5595543496f570983dc330 ]
mach/loongson64 fails to build when the FPU support is disabled:
arch/mips/loongson64/cop2-ex.c:45:15: error: implicit declaration of function ‘__is_fpu_owner’; did you mean ‘is_fpu_owner’? [-Werror=implicit-function-declaration]
arch/mips/loongson64/cop2-ex.c:98:30: error: ‘struct thread_struct’ has no member named ‘fpu’
arch/mips/loongson64/cop2-ex.c:99:30: error: ‘struct thread_struct’ has no member named ‘fpu’
arch/mips/loongson64/cop2-ex.c:131:43: error: ‘struct thread_struct’ has no member named ‘fpu’
arch/mips/loongson64/cop2-ex.c:137:38: error: ‘struct thread_struct’ has no member named ‘fpu’
arch/mips/loongson64/cop2-ex.c:203:30: error: ‘struct thread_struct’ has no member named ‘fpu’
arch/mips/loongson64/cop2-ex.c:219:30: error: ‘struct thread_struct’ has no member named ‘fpu’
arch/mips/loongson64/cop2-ex.c:283:38: error: ‘struct thread_struct’ has no member named ‘fpu’
arch/mips/loongson64/cop2-ex.c:301:38: error: ‘struct thread_struct’ has no member named ‘fpu’
Fixes: ef2f826c8f2f ("MIPS: Loongson-3: Enable the COP2 usage")
Suggested-by: Huacai Chen <[email protected]>
Reviewed-by: Huacai Chen <[email protected]>
Reported-by: k2ci robot <[email protected]>
Signed-off-by: Jackie Liu <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/mips/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 49c540790fd2d..8e77149d658fc 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -1383,6 +1383,7 @@ config CPU_LOONGSON3
select WEAK_REORDERING_BEYOND_LLSC
select MIPS_PGD_C0_CONTEXT
select MIPS_L1_CACHE_SHIFT_6
+ select MIPS_FP_SUPPORT
select GPIOLIB
help
The Loongson 3 processor implements the MIPS64R2 instruction
--
2.33.0
From: Andreas Kemnade <[email protected]>
[ Upstream commit 884ea75d79a36faf3731ad9d6b9c29f58697638d ]
Fix typo in pinctrl. It did only work because the bootloader
seems to have initialized it.
Fixes: ee327111953b ("ARM: dts: omap3-gta04: Define and use bma180 irq pin")
Signed-off-by: Andreas Kemnade <[email protected]>
Signed-off-by: Tony Lindgren <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/omap3-gta04.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi
index e83d0619b3b7c..ee028aa663fa6 100644
--- a/arch/arm/boot/dts/omap3-gta04.dtsi
+++ b/arch/arm/boot/dts/omap3-gta04.dtsi
@@ -353,7 +353,7 @@
compatible = "bosch,bma180";
reg = <0x41>;
pinctrl-names = "default";
- pintcrl-0 = <&bma180_pins>;
+ pinctrl-0 = <&bma180_pins>;
interrupt-parent = <&gpio4>;
interrupts = <19 IRQ_TYPE_LEVEL_HIGH>; /* GPIO_115 */
};
--
2.33.0
From: Dongliang Mu <[email protected]>
[ Upstream commit c48a14dca2cb57527dde6b960adbe69953935f10 ]
In jfs_mount, when diMount(ipaimap2) fails, it goes to errout35. However,
the following code does not free ipaimap2 allocated by diReadSpecial.
Fix this by refactoring the error handling code of jfs_mount. To be
specific, modify the lable name and free ipaimap2 when the above error
ocurrs.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Dongliang Mu <[email protected]>
Signed-off-by: Dave Kleikamp <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/jfs/jfs_mount.c | 51 ++++++++++++++++++++--------------------------
1 file changed, 22 insertions(+), 29 deletions(-)
diff --git a/fs/jfs/jfs_mount.c b/fs/jfs/jfs_mount.c
index b5214c9ac47ac..f1a705d159043 100644
--- a/fs/jfs/jfs_mount.c
+++ b/fs/jfs/jfs_mount.c
@@ -93,14 +93,14 @@ int jfs_mount(struct super_block *sb)
* (initialize mount inode from the superblock)
*/
if ((rc = chkSuper(sb))) {
- goto errout20;
+ goto out;
}
ipaimap = diReadSpecial(sb, AGGREGATE_I, 0);
if (ipaimap == NULL) {
jfs_err("jfs_mount: Failed to read AGGREGATE_I");
rc = -EIO;
- goto errout20;
+ goto out;
}
sbi->ipaimap = ipaimap;
@@ -111,7 +111,7 @@ int jfs_mount(struct super_block *sb)
*/
if ((rc = diMount(ipaimap))) {
jfs_err("jfs_mount: diMount(ipaimap) failed w/rc = %d", rc);
- goto errout21;
+ goto err_ipaimap;
}
/*
@@ -120,7 +120,7 @@ int jfs_mount(struct super_block *sb)
ipbmap = diReadSpecial(sb, BMAP_I, 0);
if (ipbmap == NULL) {
rc = -EIO;
- goto errout22;
+ goto err_umount_ipaimap;
}
jfs_info("jfs_mount: ipbmap:0x%p", ipbmap);
@@ -132,7 +132,7 @@ int jfs_mount(struct super_block *sb)
*/
if ((rc = dbMount(ipbmap))) {
jfs_err("jfs_mount: dbMount failed w/rc = %d", rc);
- goto errout22;
+ goto err_ipbmap;
}
/*
@@ -151,7 +151,7 @@ int jfs_mount(struct super_block *sb)
if (!ipaimap2) {
jfs_err("jfs_mount: Failed to read AGGREGATE_I");
rc = -EIO;
- goto errout35;
+ goto err_umount_ipbmap;
}
sbi->ipaimap2 = ipaimap2;
@@ -163,7 +163,7 @@ int jfs_mount(struct super_block *sb)
if ((rc = diMount(ipaimap2))) {
jfs_err("jfs_mount: diMount(ipaimap2) failed, rc = %d",
rc);
- goto errout35;
+ goto err_ipaimap2;
}
} else
/* Secondary aggregate inode table is not valid */
@@ -180,7 +180,7 @@ int jfs_mount(struct super_block *sb)
jfs_err("jfs_mount: Failed to read FILESYSTEM_I");
/* open fileset secondary inode allocation map */
rc = -EIO;
- goto errout40;
+ goto err_umount_ipaimap2;
}
jfs_info("jfs_mount: ipimap:0x%p", ipimap);
@@ -190,41 +190,34 @@ int jfs_mount(struct super_block *sb)
/* initialize fileset inode allocation map */
if ((rc = diMount(ipimap))) {
jfs_err("jfs_mount: diMount failed w/rc = %d", rc);
- goto errout41;
+ goto err_ipimap;
}
- goto out;
+ return rc;
/*
* unwind on error
*/
- errout41: /* close fileset inode allocation map inode */
+err_ipimap:
+ /* close fileset inode allocation map inode */
diFreeSpecial(ipimap);
-
- errout40: /* fileset closed */
-
+err_umount_ipaimap2:
/* close secondary aggregate inode allocation map */
- if (ipaimap2) {
+ if (ipaimap2)
diUnmount(ipaimap2, 1);
+err_ipaimap2:
+ /* close aggregate inodes */
+ if (ipaimap2)
diFreeSpecial(ipaimap2);
- }
-
- errout35:
-
- /* close aggregate block allocation map */
+err_umount_ipbmap: /* close aggregate block allocation map */
dbUnmount(ipbmap, 1);
+err_ipbmap: /* close aggregate inodes */
diFreeSpecial(ipbmap);
-
- errout22: /* close aggregate inode allocation map */
-
+err_umount_ipaimap: /* close aggregate inode allocation map */
diUnmount(ipaimap, 1);
-
- errout21: /* close aggregate inodes */
+err_ipaimap: /* close aggregate inodes */
diFreeSpecial(ipaimap);
- errout20: /* aggregate closed */
-
- out:
-
+out:
if (rc)
jfs_err("Mount JFS Failure: %d", rc);
--
2.33.0
From: Takashi Iwai <[email protected]>
[ Upstream commit 46243b85b0ec5d2cee7545e5ce18c015ce91957e ]
The position reporting on Intel Skylake and later chips via
azx_get_pos_skl() contains a udelay(20) call for the capture streams.
A call for this alone doesn't sound too harmful. However, as the
pointer PCM ops is one of the hottest path in the PCM operations --
especially for the timer-scheduled operations like PulseAudio -- such
a delay hogs CPU usage significantly in the total performance.
The code there was taken from the original code in ASoC SST Skylake
driver blindly. The udelay() is a workaround for the case where the
reported position is behind the period boundary at the timing
triggered from interrupts; applications often expect that the full
data is available for the whole period when returned (and also that's
the definition of the ALSA PCM period).
OTOH, HD-audio (legacy) driver has already some workarounds for the
delayed position reporting due to its relatively large FIFO, such as
the BDL position adjustment and the delayed period-elapsed call in the
work. That said, the udelay() is almost superfluous for HD-audio
driver unlike SST, and we can drop the udelay().
Though, the current code doesn't guarantee the full period readiness
as mentioned in the above, but rather it checks the wallclock and
detects the unexpected jump. That's one missing piece, and the drop
of udelay() needs a bit more sanity checks for the delayed handling.
This patch implements those: the drop of udelay() call in
azx_get_pos_skl() and the more proper check of hwptr in
azx_position_ok(). The latter change is applied only for the case
where the stream is running in the normal mode without
no_period_wakeup flag. When no_period_wakeup is set, it essentially
ignores the period handling and rather concentrates only on the
current position; which implies that we don't need to care about the
period boundary at all.
Fixes: f87e7f25893d ("ALSA: hda - Improved position reporting on SKL+")
Reported-by: Jens Axboe <[email protected]>
Reviewed-by: Pierre-Louis Bossart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/pci/hda/hda_intel.c | 28 +++++++++++++++++++++++-----
1 file changed, 23 insertions(+), 5 deletions(-)
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index e399c5718ee60..de090a3d2b384 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -742,13 +742,17 @@ static int azx_intel_link_power(struct azx *chip, bool enable)
* the update-IRQ timing. The IRQ is issued before actually the
* data is processed. So, we need to process it afterwords in a
* workqueue.
+ *
+ * Returns 1 if OK to proceed, 0 for delay handling, -1 for skipping update
*/
static int azx_position_ok(struct azx *chip, struct azx_dev *azx_dev)
{
struct snd_pcm_substream *substream = azx_dev->core.substream;
+ struct snd_pcm_runtime *runtime = substream->runtime;
int stream = substream->stream;
u32 wallclk;
unsigned int pos;
+ snd_pcm_uframes_t hwptr, target;
wallclk = azx_readl(chip, WALLCLK) - azx_dev->core.start_wallclk;
if (wallclk < (azx_dev->core.period_wallclk * 2) / 3)
@@ -785,6 +789,24 @@ static int azx_position_ok(struct azx *chip, struct azx_dev *azx_dev)
/* NG - it's below the first next period boundary */
return chip->bdl_pos_adj ? 0 : -1;
azx_dev->core.start_wallclk += wallclk;
+
+ if (azx_dev->core.no_period_wakeup)
+ return 1; /* OK, no need to check period boundary */
+
+ if (runtime->hw_ptr_base != runtime->hw_ptr_interrupt)
+ return 1; /* OK, already in hwptr updating process */
+
+ /* check whether the period gets really elapsed */
+ pos = bytes_to_frames(runtime, pos);
+ hwptr = runtime->hw_ptr_base + pos;
+ if (hwptr < runtime->status->hw_ptr)
+ hwptr += runtime->buffer_size;
+ target = runtime->hw_ptr_interrupt + runtime->period_size;
+ if (hwptr < target) {
+ /* too early wakeup, process it later */
+ return chip->bdl_pos_adj ? 0 : -1;
+ }
+
return 1; /* OK, it's fine */
}
@@ -982,11 +1004,7 @@ static unsigned int azx_get_pos_skl(struct azx *chip, struct azx_dev *azx_dev)
if (azx_dev->core.substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
return azx_skl_get_dpib_pos(chip, azx_dev);
- /* For capture, we need to read posbuf, but it requires a delay
- * for the possible boundary overlap; the read of DPIB fetches the
- * actual posbuf
- */
- udelay(20);
+ /* read of DPIB fetches the actual posbuf */
azx_skl_get_dpib_pos(chip, azx_dev);
return azx_get_pos_posbuf(chip, azx_dev);
}
--
2.33.0
From: Randy Dunlap <[email protected]>
[ Upstream commit 1aaa557b2db95c9506ed0981bc34505c32d6b62b ]
'make randconfig' can produce a .config file with
"CONFIG_MEMORY_RESERVE=" (no value) since it has no default.
When a subsequent 'make all' is done, kconfig restarts the config
and prompts for a value for MEMORY_RESERVE. This breaks
scripting/automation where there is no interactive user input.
Add a default value for MEMORY_RESERVE. (Any integer value will
work here for kconfig.)
Fixes a kconfig warning:
.config:214:warning: symbol value '' invalid for MEMORY_RESERVE
* Restart config...
Memory reservation (MiB) (MEMORY_RESERVE) [] (NEW)
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") # from beginning of git history
Signed-off-by: Randy Dunlap <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Cc: Greg Ungerer <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Ungerer <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/m68k/Kconfig.machine | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/m68k/Kconfig.machine b/arch/m68k/Kconfig.machine
index 5cd57b4d36156..4a1697fa9a37d 100644
--- a/arch/m68k/Kconfig.machine
+++ b/arch/m68k/Kconfig.machine
@@ -185,6 +185,7 @@ config INIT_LCD
config MEMORY_RESERVE
int "Memory reservation (MiB)"
depends on (UCSIMM || UCDIMM)
+ default 0
help
Reserve certain memory regions on 68x328 based boards.
--
2.33.0
From: Daniel Jordan <[email protected]>
[ Upstream commit 68b6dea802cea0dbdd8bd7ccc60716b5a32a5d8a ]
These three events can race when pcrypt is used multiple times in a
template ("pcrypt(pcrypt(...))"):
1. [taskA] The caller makes the crypto request via crypto_aead_encrypt()
2. [kworkerB] padata serializes the inner pcrypt request
3. [kworkerC] padata serializes the outer pcrypt request
3 might finish before the call to crypto_aead_encrypt() returns in 1,
resulting in two possible issues.
First, a use-after-free of the crypto request's memory when, for
example, taskA writes to the outer pcrypt request's padata->info in
pcrypt_aead_enc() after kworkerC completes the request.
Second, the outer pcrypt request overwrites the inner pcrypt request's
return code with -EINPROGRESS, making a successful request appear to
fail. For instance, kworkerB writes the outer pcrypt request's
padata->info in pcrypt_aead_done() and then taskA overwrites it
in pcrypt_aead_enc().
Avoid both situations by delaying the write of padata->info until after
the inner crypto request's return code is checked. This prevents the
use-after-free by not touching the crypto request's memory after the
next-inner crypto request is made, and stops padata->info from being
overwritten.
Fixes: 5068c7a883d16 ("crypto: pcrypt - Add pcrypt crypto parallelization wrapper")
Reported-by: [email protected]
Signed-off-by: Daniel Jordan <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
crypto/pcrypt.c | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)
diff --git a/crypto/pcrypt.c b/crypto/pcrypt.c
index 85082574c5154..62e11835f220e 100644
--- a/crypto/pcrypt.c
+++ b/crypto/pcrypt.c
@@ -138,12 +138,14 @@ static void pcrypt_aead_enc(struct padata_priv *padata)
{
struct pcrypt_request *preq = pcrypt_padata_request(padata);
struct aead_request *req = pcrypt_request_ctx(preq);
+ int ret;
- padata->info = crypto_aead_encrypt(req);
+ ret = crypto_aead_encrypt(req);
- if (padata->info == -EINPROGRESS)
+ if (ret == -EINPROGRESS)
return;
+ padata->info = ret;
padata_do_serial(padata);
}
@@ -180,12 +182,14 @@ static void pcrypt_aead_dec(struct padata_priv *padata)
{
struct pcrypt_request *preq = pcrypt_padata_request(padata);
struct aead_request *req = pcrypt_request_ctx(preq);
+ int ret;
- padata->info = crypto_aead_decrypt(req);
+ ret = crypto_aead_decrypt(req);
- if (padata->info == -EINPROGRESS)
+ if (ret == -EINPROGRESS)
return;
+ padata->info = ret;
padata_do_serial(padata);
}
--
2.33.0
From: Eric Dumazet <[email protected]>
[ Upstream commit 8ac9dfd58b138f7e82098a4e0a0d46858b12215b ]
Both ifindex and LLC_SK_DEV_HASH_ENTRIES are signed.
This means that (ifindex % LLC_SK_DEV_HASH_ENTRIES) is negative
if @ifindex is negative.
We could simply make LLC_SK_DEV_HASH_ENTRIES unsigned.
In this patch I chose to use hash_32() to get more entropy
from @ifindex, like llc_sk_laddr_hashfn().
UBSAN: array-index-out-of-bounds in ./include/net/llc.h:75:26
index -43 is out of range for type 'hlist_head [64]'
CPU: 1 PID: 20999 Comm: syz-executor.3 Not tainted 5.15.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
ubsan_epilogue+0xb/0x5a lib/ubsan.c:151
__ubsan_handle_out_of_bounds.cold+0x62/0x6c lib/ubsan.c:291
llc_sk_dev_hash include/net/llc.h:75 [inline]
llc_sap_add_socket+0x49c/0x520 net/llc/llc_conn.c:697
llc_ui_bind+0x680/0xd70 net/llc/af_llc.c:404
__sys_bind+0x1e9/0x250 net/socket.c:1693
__do_sys_bind net/socket.c:1704 [inline]
__se_sys_bind net/socket.c:1702 [inline]
__x64_sys_bind+0x6f/0xb0 net/socket.c:1702
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7fa503407ae9
Fixes: 6d2e3ea28446 ("llc: use a device based hash table to speed up multicast delivery")
Signed-off-by: Eric Dumazet <[email protected]>
Reported-by: syzbot <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/net/llc.h | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/include/net/llc.h b/include/net/llc.h
index df282d9b40170..9c10b121b49b0 100644
--- a/include/net/llc.h
+++ b/include/net/llc.h
@@ -72,7 +72,9 @@ struct llc_sap {
static inline
struct hlist_head *llc_sk_dev_hash(struct llc_sap *sap, int ifindex)
{
- return &sap->sk_dev_hash[ifindex % LLC_SK_DEV_HASH_ENTRIES];
+ u32 bucket = hash_32(ifindex, LLC_SK_DEV_HASH_BITS);
+
+ return &sap->sk_dev_hash[bucket];
}
static inline
--
2.33.0
From: Chengfeng Ye <[email protected]>
[ Upstream commit 9fec40f850658e00a14a7dd9e06f7fbc7e59cc4a ]
skb is already freed by dev_kfree_skb in pn533_fill_fragment_skbs,
but follow error handler branch when pn533_fill_fragment_skbs()
fails, skb is freed again, results in double free issue. Fix this
by not free skb in error path of pn533_fill_fragment_skbs.
Fixes: 963a82e07d4e ("NFC: pn533: Split large Tx frames in chunks")
Fixes: 93ad42020c2d ("NFC: pn533: Target mode Tx fragmentation support")
Signed-off-by: Chengfeng Ye <[email protected]>
Reviewed-by: Dan Carpenter <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/nfc/pn533/pn533.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/nfc/pn533/pn533.c b/drivers/nfc/pn533/pn533.c
index e3026e20f1696..52a1a2cae6c74 100644
--- a/drivers/nfc/pn533/pn533.c
+++ b/drivers/nfc/pn533/pn533.c
@@ -2084,7 +2084,7 @@ static int pn533_fill_fragment_skbs(struct pn533 *dev, struct sk_buff *skb)
frag = pn533_alloc_skb(dev, frag_size);
if (!frag) {
skb_queue_purge(&dev->fragment_skb);
- break;
+ return -ENOMEM;
}
if (!dev->tgt_mode) {
@@ -2154,7 +2154,7 @@ static int pn533_transceive(struct nfc_dev *nfc_dev,
/* jumbo frame ? */
if (skb->len > PN533_CMD_DATAEXCH_DATA_MAXLEN) {
rc = pn533_fill_fragment_skbs(dev, skb);
- if (rc <= 0)
+ if (rc < 0)
goto error;
skb = skb_dequeue(&dev->fragment_skb);
@@ -2226,7 +2226,7 @@ static int pn533_tm_send(struct nfc_dev *nfc_dev, struct sk_buff *skb)
/* let's split in multiple chunks if size's too big */
if (skb->len > PN533_CMD_DATAEXCH_DATA_MAXLEN) {
rc = pn533_fill_fragment_skbs(dev, skb);
- if (rc <= 0)
+ if (rc < 0)
goto error;
/* get the first skb */
--
2.33.0
From: Huang Guobin <[email protected]>
[ Upstream commit b93c6a911a3fe926b00add28f3b932007827c4ca ]
When I do fuzz test for bonding device interface, I got the following
use-after-free Calltrace:
==================================================================
BUG: KASAN: use-after-free in bond_enslave+0x1521/0x24f0
Read of size 8 at addr ffff88825bc11c00 by task ifenslave/7365
CPU: 5 PID: 7365 Comm: ifenslave Tainted: G E 5.15.0-rc1+ #13
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1 04/01/2014
Call Trace:
dump_stack_lvl+0x6c/0x8b
print_address_description.constprop.0+0x48/0x70
kasan_report.cold+0x82/0xdb
__asan_load8+0x69/0x90
bond_enslave+0x1521/0x24f0
bond_do_ioctl+0x3e0/0x450
dev_ifsioc+0x2ba/0x970
dev_ioctl+0x112/0x710
sock_do_ioctl+0x118/0x1b0
sock_ioctl+0x2e0/0x490
__x64_sys_ioctl+0x118/0x150
do_syscall_64+0x35/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f19159cf577
Code: b3 66 90 48 8b 05 11 89 2c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 78
RSP: 002b:00007ffeb3083c78 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007ffeb3084bca RCX: 00007f19159cf577
RDX: 00007ffeb3083ce0 RSI: 0000000000008990 RDI: 0000000000000003
RBP: 00007ffeb3084bc4 R08: 0000000000000040 R09: 0000000000000000
R10: 00007ffeb3084bc0 R11: 0000000000000246 R12: 00007ffeb3083ce0
R13: 0000000000000000 R14: 0000000000000000 R15: 00007ffeb3083cb0
Allocated by task 7365:
kasan_save_stack+0x23/0x50
__kasan_kmalloc+0x83/0xa0
kmem_cache_alloc_trace+0x22e/0x470
bond_enslave+0x2e1/0x24f0
bond_do_ioctl+0x3e0/0x450
dev_ifsioc+0x2ba/0x970
dev_ioctl+0x112/0x710
sock_do_ioctl+0x118/0x1b0
sock_ioctl+0x2e0/0x490
__x64_sys_ioctl+0x118/0x150
do_syscall_64+0x35/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xae
Freed by task 7365:
kasan_save_stack+0x23/0x50
kasan_set_track+0x20/0x30
kasan_set_free_info+0x24/0x40
__kasan_slab_free+0xf2/0x130
kfree+0xd1/0x5c0
slave_kobj_release+0x61/0x90
kobject_put+0x102/0x180
bond_sysfs_slave_add+0x7a/0xa0
bond_enslave+0x11b6/0x24f0
bond_do_ioctl+0x3e0/0x450
dev_ifsioc+0x2ba/0x970
dev_ioctl+0x112/0x710
sock_do_ioctl+0x118/0x1b0
sock_ioctl+0x2e0/0x490
__x64_sys_ioctl+0x118/0x150
do_syscall_64+0x35/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xae
Last potentially related work creation:
kasan_save_stack+0x23/0x50
kasan_record_aux_stack+0xb7/0xd0
insert_work+0x43/0x190
__queue_work+0x2e3/0x970
delayed_work_timer_fn+0x3e/0x50
call_timer_fn+0x148/0x470
run_timer_softirq+0x8a8/0xc50
__do_softirq+0x107/0x55f
Second to last potentially related work creation:
kasan_save_stack+0x23/0x50
kasan_record_aux_stack+0xb7/0xd0
insert_work+0x43/0x190
__queue_work+0x2e3/0x970
__queue_delayed_work+0x130/0x180
queue_delayed_work_on+0xa7/0xb0
bond_enslave+0xe25/0x24f0
bond_do_ioctl+0x3e0/0x450
dev_ifsioc+0x2ba/0x970
dev_ioctl+0x112/0x710
sock_do_ioctl+0x118/0x1b0
sock_ioctl+0x2e0/0x490
__x64_sys_ioctl+0x118/0x150
do_syscall_64+0x35/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xae
The buggy address belongs to the object at ffff88825bc11c00
which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 0 bytes inside of
1024-byte region [ffff88825bc11c00, ffff88825bc12000)
The buggy address belongs to the page:
page:ffffea00096f0400 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x25bc10
head:ffffea00096f0400 order:3 compound_mapcount:0 compound_pincount:0
flags: 0x57ff00000010200(slab|head|node=1|zone=2|lastcpupid=0x7ff)
raw: 057ff00000010200 ffffea0009a71c08 ffff888240001968 ffff88810004dbc0
raw: 0000000000000000 00000000000a000a 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff88825bc11b00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff88825bc11b80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff88825bc11c00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff88825bc11c80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff88825bc11d00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
Put new_slave in bond_sysfs_slave_add() will cause use-after-free problems
when new_slave is accessed in the subsequent error handling process. Since
new_slave will be put in the subsequent error handling process, remove the
unnecessary put to fix it.
In addition, when sysfs_create_file() fails, if some files have been crea-
ted successfully, we need to call sysfs_remove_file() to remove them.
Since there are sysfs_create_files() & sysfs_remove_files() can be used,
use these two functions instead.
Fixes: 7afcaec49696 (bonding: use kobject_put instead of _del after kobject_add)
Signed-off-by: Huang Guobin <[email protected]>
Reviewed-by: Jakub Kicinski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/bonding/bond_sysfs_slave.c | 36 ++++++++------------------
1 file changed, 11 insertions(+), 25 deletions(-)
diff --git a/drivers/net/bonding/bond_sysfs_slave.c b/drivers/net/bonding/bond_sysfs_slave.c
index 68bbac4715c35..1e1e77a40f182 100644
--- a/drivers/net/bonding/bond_sysfs_slave.c
+++ b/drivers/net/bonding/bond_sysfs_slave.c
@@ -112,15 +112,15 @@ static ssize_t ad_partner_oper_port_state_show(struct slave *slave, char *buf)
}
static SLAVE_ATTR_RO(ad_partner_oper_port_state);
-static const struct slave_attribute *slave_attrs[] = {
- &slave_attr_state,
- &slave_attr_mii_status,
- &slave_attr_link_failure_count,
- &slave_attr_perm_hwaddr,
- &slave_attr_queue_id,
- &slave_attr_ad_aggregator_id,
- &slave_attr_ad_actor_oper_port_state,
- &slave_attr_ad_partner_oper_port_state,
+static const struct attribute *slave_attrs[] = {
+ &slave_attr_state.attr,
+ &slave_attr_mii_status.attr,
+ &slave_attr_link_failure_count.attr,
+ &slave_attr_perm_hwaddr.attr,
+ &slave_attr_queue_id.attr,
+ &slave_attr_ad_aggregator_id.attr,
+ &slave_attr_ad_actor_oper_port_state.attr,
+ &slave_attr_ad_partner_oper_port_state.attr,
NULL
};
@@ -141,24 +141,10 @@ const struct sysfs_ops slave_sysfs_ops = {
int bond_sysfs_slave_add(struct slave *slave)
{
- const struct slave_attribute **a;
- int err;
-
- for (a = slave_attrs; *a; ++a) {
- err = sysfs_create_file(&slave->kobj, &((*a)->attr));
- if (err) {
- kobject_put(&slave->kobj);
- return err;
- }
- }
-
- return 0;
+ return sysfs_create_files(&slave->kobj, slave_attrs);
}
void bond_sysfs_slave_del(struct slave *slave)
{
- const struct slave_attribute **a;
-
- for (a = slave_attrs; *a; ++a)
- sysfs_remove_file(&slave->kobj, &((*a)->attr));
+ sysfs_remove_files(&slave->kobj, slave_attrs);
}
--
2.33.0
From: Eiichi Tsukata <[email protected]>
[ Upstream commit c7cd82b90599fa10915f41e3dd9098a77d0aa7b6 ]
Currently vosck_connect() increments sock refcount for nonblocking
socket each time it's called, which can lead to memory leak if
it's called multiple times because connect timeout function decrements
sock refcount only once.
Fixes it by making vsock_connect() return -EALREADY immediately when
sock state is already SS_CONNECTING.
Fixes: d021c344051a ("VSOCK: Introduce VM Sockets")
Reviewed-by: Stefano Garzarella <[email protected]>
Signed-off-by: Eiichi Tsukata <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/vmw_vsock/af_vsock.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/net/vmw_vsock/af_vsock.c b/net/vmw_vsock/af_vsock.c
index 02a171916dd2b..8b211d164beea 100644
--- a/net/vmw_vsock/af_vsock.c
+++ b/net/vmw_vsock/af_vsock.c
@@ -1166,6 +1166,8 @@ static int vsock_stream_connect(struct socket *sock, struct sockaddr *addr,
* non-blocking call.
*/
err = -EALREADY;
+ if (flags & O_NONBLOCK)
+ goto out;
break;
default:
if ((sk->sk_state == TCP_LISTEN) ||
--
2.33.0
From: Michał Mirosław <[email protected]>
commit 0d08e7bf0d0d1a29aff7b16ef516f7415eb1aa05 upstream.
Currently __set_fixmap() bails out with a warning when called in early boot
from early_iounmap(). Fix it, and while at it, make the comment a bit easier
to understand.
Cc: <[email protected]>
Fixes: b089c31c519c ("ARM: 8667/3: Fix memory attribute inconsistencies when using fixmap")
Acked-by: Ard Biesheuvel <[email protected]>
Signed-off-by: Michał Mirosław <[email protected]>
Signed-off-by: Russell King (Oracle) <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/mm/mmu.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -416,9 +416,9 @@ void __set_fixmap(enum fixed_addresses i
FIXADDR_END);
BUG_ON(idx >= __end_of_fixed_addresses);
- /* we only support device mappings until pgprot_kernel has been set */
+ /* We support only device mappings before pgprot_kernel is set. */
if (WARN_ON(pgprot_val(prot) != pgprot_val(FIXMAP_PAGE_IO) &&
- pgprot_val(pgprot_kernel) == 0))
+ pgprot_val(prot) && pgprot_val(pgprot_kernel) == 0))
return;
if (pgprot_val(prot))
From: Arnd Bergmann <[email protected]>
commit 418ace9992a7647c446ed3186df40cf165b67298 upstream.
Naresh and Antonio ran into a build failure with latest Debian
armhf compilers, with lots of output like
tmp/ccY3nOAs.s:2215: Error: selected processor does not support `cpsid i' in ARM mode
As it turns out, $(cc-option) fails early here when the FPU is not
selected before CPU architecture is selected, as the compiler
option check runs before enabling -msoft-float, which causes
a problem when testing a target architecture level without an FPU:
cc1: error: '-mfloat-abi=hard': selected architecture lacks an FPU
Passing e.g. -march=armv6k+fp in place of -march=armv6k would avoid this
issue, but the fallback logic is already broken because all supported
compilers (gcc-5 and higher) are much more recent than these options,
and building with -march=armv5t as a fallback no longer works.
The best way forward that I see is to just remove all the checks, which
also has the nice side-effect of slightly improving the startup time for
'make'.
The -mtune=marvell-f option was apparently never supported by any mainline
compiler, and the custom Codesourcery gcc build that did support is
now too old to build kernels, so just use -mtune=xscale unconditionally
for those.
This should be safe to apply on all stable kernels, and will be required
in order to keep building them with gcc-11 and higher.
Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=996419
Reported-by: Antonio Terceiro <[email protected]>
Reported-by: Naresh Kamboju <[email protected]>
Reported-by: Sebastian Andrzej Siewior <[email protected]>
Tested-by: Sebastian Reichel <[email protected]>
Tested-by: Klaus Kudielka <[email protected]>
Cc: Matthias Klose <[email protected]>
Cc: [email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Russell King (Oracle) <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/Makefile | 22 +++++++++++-----------
1 file changed, 11 insertions(+), 11 deletions(-)
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -66,15 +66,15 @@ KBUILD_CFLAGS += $(call cc-option,-fno-i
# Note that GCC does not numerically define an architecture version
# macro, but instead defines a whole series of macros which makes
# testing for a specific architecture or later rather impossible.
-arch-$(CONFIG_CPU_32v7M) =-D__LINUX_ARM_ARCH__=7 -march=armv7-m -Wa,-march=armv7-m
-arch-$(CONFIG_CPU_32v7) =-D__LINUX_ARM_ARCH__=7 $(call cc-option,-march=armv7-a,-march=armv5t -Wa$(comma)-march=armv7-a)
-arch-$(CONFIG_CPU_32v6) =-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6,-march=armv5t -Wa$(comma)-march=armv6)
+arch-$(CONFIG_CPU_32v7M) =-D__LINUX_ARM_ARCH__=7 -march=armv7-m
+arch-$(CONFIG_CPU_32v7) =-D__LINUX_ARM_ARCH__=7 -march=armv7-a
+arch-$(CONFIG_CPU_32v6) =-D__LINUX_ARM_ARCH__=6 -march=armv6
# Only override the compiler option if ARMv6. The ARMv6K extensions are
# always available in ARMv7
ifeq ($(CONFIG_CPU_32v6),y)
-arch-$(CONFIG_CPU_32v6K) =-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6k,-march=armv5t -Wa$(comma)-march=armv6k)
+arch-$(CONFIG_CPU_32v6K) =-D__LINUX_ARM_ARCH__=6 -march=armv6k
endif
-arch-$(CONFIG_CPU_32v5) =-D__LINUX_ARM_ARCH__=5 $(call cc-option,-march=armv5te,-march=armv4t)
+arch-$(CONFIG_CPU_32v5) =-D__LINUX_ARM_ARCH__=5 -march=armv5te
arch-$(CONFIG_CPU_32v4T) =-D__LINUX_ARM_ARCH__=4 -march=armv4t
arch-$(CONFIG_CPU_32v4) =-D__LINUX_ARM_ARCH__=4 -march=armv4
arch-$(CONFIG_CPU_32v3) =-D__LINUX_ARM_ARCH__=3 -march=armv3
@@ -88,7 +88,7 @@ tune-$(CONFIG_CPU_ARM720T) =-mtune=arm7t
tune-$(CONFIG_CPU_ARM740T) =-mtune=arm7tdmi
tune-$(CONFIG_CPU_ARM9TDMI) =-mtune=arm9tdmi
tune-$(CONFIG_CPU_ARM940T) =-mtune=arm9tdmi
-tune-$(CONFIG_CPU_ARM946E) =$(call cc-option,-mtune=arm9e,-mtune=arm9tdmi)
+tune-$(CONFIG_CPU_ARM946E) =-mtune=arm9e
tune-$(CONFIG_CPU_ARM920T) =-mtune=arm9tdmi
tune-$(CONFIG_CPU_ARM922T) =-mtune=arm9tdmi
tune-$(CONFIG_CPU_ARM925T) =-mtune=arm9tdmi
@@ -96,11 +96,11 @@ tune-$(CONFIG_CPU_ARM926T) =-mtune=arm9t
tune-$(CONFIG_CPU_FA526) =-mtune=arm9tdmi
tune-$(CONFIG_CPU_SA110) =-mtune=strongarm110
tune-$(CONFIG_CPU_SA1100) =-mtune=strongarm1100
-tune-$(CONFIG_CPU_XSCALE) =$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale
-tune-$(CONFIG_CPU_XSC3) =$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale
-tune-$(CONFIG_CPU_FEROCEON) =$(call cc-option,-mtune=marvell-f,-mtune=xscale)
-tune-$(CONFIG_CPU_V6) =$(call cc-option,-mtune=arm1136j-s,-mtune=strongarm)
-tune-$(CONFIG_CPU_V6K) =$(call cc-option,-mtune=arm1136j-s,-mtune=strongarm)
+tune-$(CONFIG_CPU_XSCALE) =-mtune=xscale
+tune-$(CONFIG_CPU_XSC3) =-mtune=xscale
+tune-$(CONFIG_CPU_FEROCEON) =-mtune=xscale
+tune-$(CONFIG_CPU_V6) =-mtune=arm1136j-s
+tune-$(CONFIG_CPU_V6K) =-mtune=arm1136j-s
# Evaluate tune cc-option calls now
tune-y := $(tune-y)
From: Johan Hovold <[email protected]>
commit 9aaa81c3366e8393a62374e3a1c67c69edc07b8a upstream.
Chipidea core was calling the interrupt handler from non-IRQ context
with interrupts enabled, something which can lead to a deadlock if
there's an actual interrupt trying to take a lock that's already held
(e.g. the controller lock in udc_irq()).
Add a wrapper that can be used to fake interrupts instead of calling the
handler directly.
Fixes: 3ecb3e09b042 ("usb: chipidea: Use extcon framework for VBUS and ID detect")
Fixes: 876d4e1e8298 ("usb: chipidea: core: add wakeup support for extcon")
Cc: Peter Chen <[email protected]>
Cc: [email protected] # 4.4
Signed-off-by: Johan Hovold <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/chipidea/core.c | 19 ++++++++++++++-----
1 file changed, 14 insertions(+), 5 deletions(-)
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -535,7 +535,7 @@ int hw_device_reset(struct ci_hdrc *ci)
return 0;
}
-static irqreturn_t ci_irq(int irq, void *data)
+static irqreturn_t ci_irq_handler(int irq, void *data)
{
struct ci_hdrc *ci = data;
irqreturn_t ret = IRQ_NONE;
@@ -588,6 +588,15 @@ static irqreturn_t ci_irq(int irq, void
return ret;
}
+static void ci_irq(struct ci_hdrc *ci)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ ci_irq_handler(ci->irq, ci);
+ local_irq_restore(flags);
+}
+
static int ci_cable_notifier(struct notifier_block *nb, unsigned long event,
void *ptr)
{
@@ -597,7 +606,7 @@ static int ci_cable_notifier(struct noti
cbl->connected = event;
cbl->changed = true;
- ci_irq(ci->irq, ci);
+ ci_irq(ci);
return NOTIFY_DONE;
}
@@ -1051,7 +1060,7 @@ static int ci_hdrc_probe(struct platform
}
}
- ret = devm_request_irq(dev, ci->irq, ci_irq, IRQF_SHARED,
+ ret = devm_request_irq(dev, ci->irq, ci_irq_handler, IRQF_SHARED,
ci->platdata->name, ci);
if (ret)
goto stop;
@@ -1175,11 +1184,11 @@ static void ci_extcon_wakeup_int(struct
if (!IS_ERR(cable_id->edev) && ci->is_otg &&
(otgsc & OTGSC_IDIE) && (otgsc & OTGSC_IDIS))
- ci_irq(ci->irq, ci);
+ ci_irq(ci);
if (!IS_ERR(cable_vbus->edev) && ci->is_otg &&
(otgsc & OTGSC_BSVIE) && (otgsc & OTGSC_BSVIS))
- ci_irq(ci->irq, ci);
+ ci_irq(ci);
}
static int ci_controller_resume(struct device *dev)
From: Miaohe Lin <[email protected]>
[ Upstream commit afe8605ca45424629fdddfd85984b442c763dc47 ]
There is one possible race window between zs_pool_dec_isolated() and
zs_unregister_migration() because wait_for_isolated_drain() checks the
isolated count without holding class->lock and there is no order inside
zs_pool_dec_isolated(). Thus the below race window could be possible:
zs_pool_dec_isolated zs_unregister_migration
check pool->destroying != 0
pool->destroying = true;
smp_mb();
wait_for_isolated_drain()
wait for pool->isolated_pages == 0
atomic_long_dec(&pool->isolated_pages);
atomic_long_read(&pool->isolated_pages) == 0
Since we observe the pool->destroying (false) before atomic_long_dec()
for pool->isolated_pages, waking pool->migration_wait up is missed.
Fix this by ensure checking pool->destroying happens after the
atomic_long_dec(&pool->isolated_pages).
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 701d678599d0 ("mm/zsmalloc.c: fix race condition in zs_destroy_pool")
Signed-off-by: Miaohe Lin <[email protected]>
Cc: Minchan Kim <[email protected]>
Cc: Sergey Senozhatsky <[email protected]>
Cc: Henry Burns <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
mm/zsmalloc.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/mm/zsmalloc.c b/mm/zsmalloc.c
index 633ebcac82f8d..6cdb49ae00010 100644
--- a/mm/zsmalloc.c
+++ b/mm/zsmalloc.c
@@ -1901,10 +1901,11 @@ static inline void zs_pool_dec_isolated(struct zs_pool *pool)
VM_BUG_ON(atomic_long_read(&pool->isolated_pages) <= 0);
atomic_long_dec(&pool->isolated_pages);
/*
- * There's no possibility of racing, since wait_for_isolated_drain()
- * checks the isolated count under &class->lock after enqueuing
- * on migration_wait.
+ * Checking pool->destroying must happen after atomic_long_dec()
+ * for pool->isolated_pages above. Paired with the smp_mb() in
+ * zs_unregister_migration().
*/
+ smp_mb__after_atomic();
if (atomic_long_read(&pool->isolated_pages) == 0 && pool->destroying)
wake_up_all(&pool->migration_wait);
}
--
2.33.0
From: Claudiu Beznea <[email protected]>
[ Upstream commit 320c88a3104dc955f928a1eecebd551ff89530c0 ]
AT_XDMAC_CC_PERID() should be used to setup bits 24..30 of XDMAC_CC
register. Using it without parenthesis around 0x7f & (i) will lead to
setting all the time zero for bits 24..30 of XDMAC_CC as the << operator
has higher precedence over bitwise &. Thus, add paranthesis around
0x7f & (i).
Fixes: 15a03850ab8f ("dmaengine: at_xdmac: fix macro typo")
Signed-off-by: Claudiu Beznea <[email protected]>
Reviewed-by: Tudor Ambarus <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/dma/at_xdmac.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/dma/at_xdmac.c b/drivers/dma/at_xdmac.c
index 22764cd30cc39..8c2da523a8ff6 100644
--- a/drivers/dma/at_xdmac.c
+++ b/drivers/dma/at_xdmac.c
@@ -156,7 +156,7 @@
#define AT_XDMAC_CC_WRIP (0x1 << 23) /* Write in Progress (read only) */
#define AT_XDMAC_CC_WRIP_DONE (0x0 << 23)
#define AT_XDMAC_CC_WRIP_IN_PROGRESS (0x1 << 23)
-#define AT_XDMAC_CC_PERID(i) (0x7f & (i) << 24) /* Channel Peripheral Identifier */
+#define AT_XDMAC_CC_PERID(i) ((0x7f & (i)) << 24) /* Channel Peripheral Identifier */
#define AT_XDMAC_CDS_MSP 0x2C /* Channel Data Stride Memory Set Pattern */
#define AT_XDMAC_CSUS 0x30 /* Channel Source Microblock Stride */
#define AT_XDMAC_CDUS 0x34 /* Channel Destination Microblock Stride */
--
2.33.0
From: Jackie Liu <[email protected]>
[ Upstream commit 2aa717473ce96c93ae43a5dc8c23cedc8ce7dd9f ]
The s3c24xx_init_intc() returns an error pointer upon failure, not NULL.
let's add an error pointer check in s3c24xx_handle_irq.
s3c_intc[0] is not NULL or ERR, we can simplify the code.
Fixes: 1f629b7a3ced ("ARM: S3C24XX: transform irq handling into a declarative form")
Signed-off-by: Jackie Liu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/irqchip/irq-s3c24xx.c | 22 ++++++++++++++++++----
1 file changed, 18 insertions(+), 4 deletions(-)
diff --git a/drivers/irqchip/irq-s3c24xx.c b/drivers/irqchip/irq-s3c24xx.c
index c25ce5af091ad..e92ab62cc87d9 100644
--- a/drivers/irqchip/irq-s3c24xx.c
+++ b/drivers/irqchip/irq-s3c24xx.c
@@ -368,11 +368,25 @@ static inline int s3c24xx_handle_intc(struct s3c_irq_intc *intc,
asmlinkage void __exception_irq_entry s3c24xx_handle_irq(struct pt_regs *regs)
{
do {
- if (likely(s3c_intc[0]))
- if (s3c24xx_handle_intc(s3c_intc[0], regs, 0))
- continue;
+ /*
+ * For platform based machines, neither ERR nor NULL can happen here.
+ * The s3c24xx_handle_irq() will be set as IRQ handler iff this succeeds:
+ *
+ * s3c_intc[0] = s3c24xx_init_intc()
+ *
+ * If this fails, the next calls to s3c24xx_init_intc() won't be executed.
+ *
+ * For DT machine, s3c_init_intc_of() could set the IRQ handler without
+ * setting s3c_intc[0] only if it was called with num_ctrl=0. There is no
+ * such code path, so again the s3c_intc[0] will have a valid pointer if
+ * set_handle_irq() is called.
+ *
+ * Therefore in s3c24xx_handle_irq(), the s3c_intc[0] is always something.
+ */
+ if (s3c24xx_handle_intc(s3c_intc[0], regs, 0))
+ continue;
- if (s3c_intc[2])
+ if (!IS_ERR_OR_NULL(s3c_intc[2]))
if (s3c24xx_handle_intc(s3c_intc[2], regs, 64))
continue;
--
2.33.0
From: Evgeny Novikov <[email protected]>
[ Upstream commit 78e4d342187625585932bb437ec26e1060f7fc6f ]
hisi_spi_nor_probe() invokes clk_disable_unprepare() on all paths after
successful call of clk_prepare_enable(). Besides, the clock is enabled by
hispi_spi_nor_prep() and disabled by hispi_spi_nor_unprep(). So at remove
time it is not possible to have the clock enabled. The patch removes
excessive clk_disable_unprepare() from hisi_spi_nor_remove().
Found by Linux Driver Verification project (linuxtesting.org).
Fixes: e523f11141bd ("mtd: spi-nor: add hisilicon spi-nor flash controller driver")
Signed-off-by: Evgeny Novikov <[email protected]>
Signed-off-by: Tudor Ambarus <[email protected]>
Reviewed-by: Pratyush Yadav <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mtd/spi-nor/hisi-sfc.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/mtd/spi-nor/hisi-sfc.c b/drivers/mtd/spi-nor/hisi-sfc.c
index 9209d225e3152..e84a310dcc6cb 100644
--- a/drivers/mtd/spi-nor/hisi-sfc.c
+++ b/drivers/mtd/spi-nor/hisi-sfc.c
@@ -485,7 +485,6 @@ static int hisi_spi_nor_remove(struct platform_device *pdev)
hisi_spi_nor_unregister_all(host);
mutex_destroy(&host->lock);
- clk_disable_unprepare(host->clk);
return 0;
}
--
2.33.0
From: Richard Fitzgerald <[email protected]>
[ Upstream commit 0306988789d9d91a18ff70bd2bf165d3ae0ef1dd ]
The driver can run without an interrupt so if devm_request_threaded_irq()
failed, the probe() just carried on. But if this was EPROBE_DEFER the
driver would continue without an interrupt instead of deferring to wait
for the interrupt to become available.
Fixes: 2c394ca79604 ("ASoC: Add support for CS42L42 codec")
Signed-off-by: Richard Fitzgerald <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/codecs/cs42l42.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/sound/soc/codecs/cs42l42.c b/sound/soc/codecs/cs42l42.c
index a341c5b08434b..7ff8b9f269713 100644
--- a/sound/soc/codecs/cs42l42.c
+++ b/sound/soc/codecs/cs42l42.c
@@ -1805,8 +1805,9 @@ static int cs42l42_i2c_probe(struct i2c_client *i2c_client,
NULL, cs42l42_irq_thread,
IRQF_ONESHOT | IRQF_TRIGGER_LOW,
"cs42l42", cs42l42);
-
- if (ret != 0)
+ if (ret == -EPROBE_DEFER)
+ goto err_disable;
+ else if (ret != 0)
dev_err(&i2c_client->dev,
"Failed to request IRQ: %d\n", ret);
--
2.33.0
From: Geert Uytterhoeven <[email protected]>
[ Upstream commit afcb5a811ff3ab3969f09666535eb6018a160358 ]
While writing an empty string to a device attribute is a no-op, and thus
does not need explicit safeguards, the user can still write a single
newline to an attribute file:
echo > .../message
If that happens, img_ascii_lcd_display() trims the newline, yielding an
empty string, and causing an infinite loop in img_ascii_lcd_scroll().
Fix this by adding a check for empty strings. Clear the display in case
one is encountered.
Fixes: 0cad855fbd083ee5 ("auxdisplay: img-ascii-lcd: driver for simple ASCII LCD displays")
Signed-off-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Miguel Ojeda <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/auxdisplay/img-ascii-lcd.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/auxdisplay/img-ascii-lcd.c b/drivers/auxdisplay/img-ascii-lcd.c
index 58403052514f0..4d57185037a0d 100644
--- a/drivers/auxdisplay/img-ascii-lcd.c
+++ b/drivers/auxdisplay/img-ascii-lcd.c
@@ -284,6 +284,16 @@ static int img_ascii_lcd_display(struct img_ascii_lcd_ctx *ctx,
if (msg[count - 1] == '\n')
count--;
+ if (!count) {
+ /* clear the LCD */
+ devm_kfree(&ctx->pdev->dev, ctx->message);
+ ctx->message = NULL;
+ ctx->message_len = 0;
+ memset(ctx->curr, ' ', ctx->cfg->num_chars);
+ ctx->cfg->update(ctx);
+ return 0;
+ }
+
new_msg = devm_kmalloc(&ctx->pdev->dev, count + 1, GFP_KERNEL);
if (!new_msg)
return -ENOMEM;
--
2.33.0
From: Geert Uytterhoeven <[email protected]>
[ Upstream commit 80f9eb70fd9276938f0a131f76d438021bfd8b34 ]
Currently /sys/class/graphics/fb0/bl_curve is not accessible (-ENODEV),
as the driver does not connect the backlight to the frame buffer device.
Fix this moving backlight initialization up, and filling in
fb_info.bl_dev.
Fixes: 8992da44c6805d53 ("auxdisplay: ht16k33: Driver for LED controller")
Signed-off-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Robin van der Gracht <[email protected]>
Signed-off-by: Miguel Ojeda <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/auxdisplay/ht16k33.c | 56 ++++++++++++++++++------------------
1 file changed, 28 insertions(+), 28 deletions(-)
diff --git a/drivers/auxdisplay/ht16k33.c b/drivers/auxdisplay/ht16k33.c
index eec69213dad4f..e3c8f355f9a62 100644
--- a/drivers/auxdisplay/ht16k33.c
+++ b/drivers/auxdisplay/ht16k33.c
@@ -426,6 +426,33 @@ static int ht16k33_probe(struct i2c_client *client,
if (err)
return err;
+ /* Backlight */
+ memset(&bl_props, 0, sizeof(struct backlight_properties));
+ bl_props.type = BACKLIGHT_RAW;
+ bl_props.max_brightness = MAX_BRIGHTNESS;
+
+ bl = devm_backlight_device_register(&client->dev, DRIVER_NAME"-bl",
+ &client->dev, priv,
+ &ht16k33_bl_ops, &bl_props);
+ if (IS_ERR(bl)) {
+ dev_err(&client->dev, "failed to register backlight\n");
+ return PTR_ERR(bl);
+ }
+
+ err = of_property_read_u32(node, "default-brightness-level",
+ &dft_brightness);
+ if (err) {
+ dft_brightness = MAX_BRIGHTNESS;
+ } else if (dft_brightness > MAX_BRIGHTNESS) {
+ dev_warn(&client->dev,
+ "invalid default brightness level: %u, using %u\n",
+ dft_brightness, MAX_BRIGHTNESS);
+ dft_brightness = MAX_BRIGHTNESS;
+ }
+
+ bl->props.brightness = dft_brightness;
+ ht16k33_bl_update_status(bl);
+
/* Framebuffer (2 bytes per column) */
BUILD_BUG_ON(PAGE_SIZE < HT16K33_FB_SIZE);
fbdev->buffer = (unsigned char *) get_zeroed_page(GFP_KERNEL);
@@ -458,6 +485,7 @@ static int ht16k33_probe(struct i2c_client *client,
fbdev->info->screen_size = HT16K33_FB_SIZE;
fbdev->info->fix = ht16k33_fb_fix;
fbdev->info->var = ht16k33_fb_var;
+ fbdev->info->bl_dev = bl;
fbdev->info->pseudo_palette = NULL;
fbdev->info->flags = FBINFO_FLAG_DEFAULT;
fbdev->info->par = priv;
@@ -470,34 +498,6 @@ static int ht16k33_probe(struct i2c_client *client,
if (err)
goto err_fbdev_unregister;
- /* Backlight */
- memset(&bl_props, 0, sizeof(struct backlight_properties));
- bl_props.type = BACKLIGHT_RAW;
- bl_props.max_brightness = MAX_BRIGHTNESS;
-
- bl = devm_backlight_device_register(&client->dev, DRIVER_NAME"-bl",
- &client->dev, priv,
- &ht16k33_bl_ops, &bl_props);
- if (IS_ERR(bl)) {
- dev_err(&client->dev, "failed to register backlight\n");
- err = PTR_ERR(bl);
- goto err_fbdev_unregister;
- }
-
- err = of_property_read_u32(node, "default-brightness-level",
- &dft_brightness);
- if (err) {
- dft_brightness = MAX_BRIGHTNESS;
- } else if (dft_brightness > MAX_BRIGHTNESS) {
- dev_warn(&client->dev,
- "invalid default brightness level: %u, using %u\n",
- dft_brightness, MAX_BRIGHTNESS);
- dft_brightness = MAX_BRIGHTNESS;
- }
-
- bl->props.brightness = dft_brightness;
- ht16k33_bl_update_status(bl);
-
ht16k33_fb_queue(priv);
return 0;
--
2.33.0
From: Geert Uytterhoeven <[email protected]>
[ Upstream commit 840fe258332544aa7321921e1723d37b772af7a9 ]
As the ht16k33 frame buffer sub-driver does not register an
fb_ops.fb_blank() handler, blanking does not work:
$ echo 1 > /sys/class/graphics/fb0/blank
sh: write error: Invalid argument
Fix this by providing a handler that always returns zero, to make sure
blank events will be sent to the actual device handling the backlight.
Reported-by: Robin van der Gracht <[email protected]>
Suggested-by: Robin van der Gracht <[email protected]>
Fixes: 8992da44c6805d53 ("auxdisplay: ht16k33: Driver for LED controller")
Signed-off-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Miguel Ojeda <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/auxdisplay/ht16k33.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/auxdisplay/ht16k33.c b/drivers/auxdisplay/ht16k33.c
index e3c8f355f9a62..f35b7ff29efd2 100644
--- a/drivers/auxdisplay/ht16k33.c
+++ b/drivers/auxdisplay/ht16k33.c
@@ -227,6 +227,15 @@ static const struct backlight_ops ht16k33_bl_ops = {
.check_fb = ht16k33_bl_check_fb,
};
+/*
+ * Blank events will be passed to the actual device handling the backlight when
+ * we return zero here.
+ */
+static int ht16k33_blank(int blank, struct fb_info *info)
+{
+ return 0;
+}
+
static int ht16k33_mmap(struct fb_info *info, struct vm_area_struct *vma)
{
struct ht16k33_priv *priv = info->par;
@@ -239,6 +248,7 @@ static struct fb_ops ht16k33_fb_ops = {
.owner = THIS_MODULE,
.fb_read = fb_sys_read,
.fb_write = fb_sys_write,
+ .fb_blank = ht16k33_blank,
.fb_fillrect = sys_fillrect,
.fb_copyarea = sys_copyarea,
.fb_imageblit = sys_imageblit,
--
2.33.0
From: "Naveen N. Rao" <[email protected]>
upstream commit 4549c3ea3160fa8b3f37dfe2f957657bb265eda9
Add a helper to check if a given offset is within the branch range for a
powerpc conditional branch instruction, and update some sites to use the
new helper.
Signed-off-by: Naveen N. Rao <[email protected]>
Reviewed-by: Christophe Leroy <[email protected]>
Acked-by: Song Liu <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/442b69a34ced32ca346a0d9a855f3f6cfdbbbd41.1633464148.git.naveen.n.rao@linux.vnet.ibm.com
Signed-off-by: Naveen N. Rao <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/include/asm/code-patching.h | 1 +
arch/powerpc/lib/code-patching.c | 7 ++++++-
arch/powerpc/net/bpf_jit.h | 7 +------
3 files changed, 8 insertions(+), 7 deletions(-)
--- a/arch/powerpc/include/asm/code-patching.h
+++ b/arch/powerpc/include/asm/code-patching.h
@@ -25,6 +25,7 @@
#define BRANCH_ABSOLUTE 0x2
bool is_offset_in_branch_range(long offset);
+bool is_offset_in_cond_branch_range(long offset);
unsigned int create_branch(const unsigned int *addr,
unsigned long target, int flags);
unsigned int create_cond_branch(const unsigned int *addr,
--- a/arch/powerpc/lib/code-patching.c
+++ b/arch/powerpc/lib/code-patching.c
@@ -244,6 +244,11 @@ bool is_offset_in_branch_range(long offs
return (offset >= -0x2000000 && offset <= 0x1fffffc && !(offset & 0x3));
}
+bool is_offset_in_cond_branch_range(long offset)
+{
+ return offset >= -0x8000 && offset <= 0x7fff && !(offset & 0x3);
+}
+
/*
* Helper to check if a given instruction is a conditional branch
* Derived from the conditional checks in analyse_instr()
@@ -297,7 +302,7 @@ unsigned int create_cond_branch(const un
offset = offset - (unsigned long)addr;
/* Check we can represent the target in the instruction format */
- if (offset < -0x8000 || offset > 0x7FFF || offset & 0x3)
+ if (!is_offset_in_cond_branch_range(offset))
return 0;
/* Mask out the flags and target, so they don't step on each other. */
--- a/arch/powerpc/net/bpf_jit.h
+++ b/arch/powerpc/net/bpf_jit.h
@@ -221,11 +221,6 @@
#define PPC_FUNC_ADDR(d,i) do { PPC_LI32(d, i); } while(0)
#endif
-static inline bool is_nearbranch(int offset)
-{
- return (offset < 32768) && (offset >= -32768);
-}
-
/*
* The fly in the ointment of code size changing from pass to pass is
* avoided by padding the short branch case with a NOP. If code size differs
@@ -234,7 +229,7 @@ static inline bool is_nearbranch(int off
* state.
*/
#define PPC_BCC(cond, dest) do { \
- if (is_nearbranch((dest) - (ctx->idx * 4))) { \
+ if (is_offset_in_cond_branch_range((long)(dest) - (ctx->idx * 4))) { \
PPC_BCC_SHORT(cond, dest); \
PPC_NOP(); \
} else { \
From: "Naveen N. Rao" <[email protected]>
upstream commit 3832ba4e283d7052b783dab8311df7e3590fed93
Add checks to ensure that we never emit branch instructions with
truncated branch offsets.
Suggested-by: Michael Ellerman <[email protected]>
Signed-off-by: Naveen N. Rao <[email protected]>
Tested-by: Johan Almbladh <[email protected]>
Reviewed-by: Christophe Leroy <[email protected]>
Acked-by: Song Liu <[email protected]>
Acked-by: Johan Almbladh <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/71d33a6b7603ec1013c9734dd8bdd4ff5e929142.1633464148.git.naveen.n.rao@linux.vnet.ibm.com
[include header, drop ppc32 changes]
Signed-off-by: Naveen N. Rao <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/net/bpf_jit.h | 26 ++++++++++++++++++++------
arch/powerpc/net/bpf_jit_comp64.c | 10 +++++++---
2 files changed, 27 insertions(+), 9 deletions(-)
--- a/arch/powerpc/net/bpf_jit.h
+++ b/arch/powerpc/net/bpf_jit.h
@@ -15,6 +15,7 @@
#ifndef __ASSEMBLY__
#include <asm/types.h>
+#include <asm/code-patching.h>
#ifdef PPC64_ELF_ABI_v1
#define FUNCTION_DESCR_SIZE 24
@@ -176,13 +177,26 @@
#define PPC_NEG(d, a) EMIT(PPC_INST_NEG | ___PPC_RT(d) | ___PPC_RA(a))
/* Long jump; (unconditional 'branch') */
-#define PPC_JMP(dest) EMIT(PPC_INST_BRANCH | \
- (((dest) - (ctx->idx * 4)) & 0x03fffffc))
+#define PPC_JMP(dest) \
+ do { \
+ long offset = (long)(dest) - (ctx->idx * 4); \
+ if (!is_offset_in_branch_range(offset)) { \
+ pr_err_ratelimited("Branch offset 0x%lx (@%u) out of range\n", offset, ctx->idx); \
+ return -ERANGE; \
+ } \
+ EMIT(PPC_INST_BRANCH | (offset & 0x03fffffc)); \
+ } while (0)
/* "cond" here covers BO:BI fields. */
-#define PPC_BCC_SHORT(cond, dest) EMIT(PPC_INST_BRANCH_COND | \
- (((cond) & 0x3ff) << 16) | \
- (((dest) - (ctx->idx * 4)) & \
- 0xfffc))
+#define PPC_BCC_SHORT(cond, dest) \
+ do { \
+ long offset = (long)(dest) - (ctx->idx * 4); \
+ if (!is_offset_in_cond_branch_range(offset)) { \
+ pr_err_ratelimited("Conditional branch offset 0x%lx (@%u) out of range\n", offset, ctx->idx); \
+ return -ERANGE; \
+ } \
+ EMIT(PPC_INST_BRANCH_COND | (((cond) & 0x3ff) << 16) | (offset & 0xfffc)); \
+ } while (0)
+
/* Sign-extended 32-bit immediate load */
#define PPC_LI32(d, i) do { \
if ((int)(uintptr_t)(i) >= -32768 && \
--- a/arch/powerpc/net/bpf_jit_comp64.c
+++ b/arch/powerpc/net/bpf_jit_comp64.c
@@ -235,7 +235,7 @@ static void bpf_jit_emit_func_call(u32 *
PPC_BLRL();
}
-static void bpf_jit_emit_tail_call(u32 *image, struct codegen_context *ctx, u32 out)
+static int bpf_jit_emit_tail_call(u32 *image, struct codegen_context *ctx, u32 out)
{
/*
* By now, the eBPF program has already setup parameters in r3, r4 and r5
@@ -296,7 +296,9 @@ static void bpf_jit_emit_tail_call(u32 *
bpf_jit_emit_common_epilogue(image, ctx);
PPC_BCTR();
+
/* out: */
+ return 0;
}
/* Assemble the body code between the prologue & epilogue */
@@ -306,7 +308,7 @@ static int bpf_jit_build_body(struct bpf
{
const struct bpf_insn *insn = fp->insnsi;
int flen = fp->len;
- int i;
+ int i, ret;
/* Start of epilogue code - will only be valid 2nd pass onwards */
u32 exit_addr = addrs[flen];
@@ -956,7 +958,9 @@ common_load:
*/
case BPF_JMP | BPF_TAIL_CALL:
ctx->seen |= SEEN_TAILCALL;
- bpf_jit_emit_tail_call(image, ctx, addrs[i + 1]);
+ ret = bpf_jit_emit_tail_call(image, ctx, addrs[i + 1]);
+ if (ret < 0)
+ return ret;
break;
default:
From: Ahmad Fatoum <[email protected]>
[ Upstream commit 164483c735190775f29d0dcbac0363adc51a068d ]
The fintek watchdog timer can configure timeouts of second granularity
only up to 255 seconds. Beyond that, the timeout needs to be configured
with minute granularity. WDIOC_GETTIMEOUT should report the actual
timeout configured, not just echo back the timeout configured by the
user. Do so.
Fixes: 96cb4eb019ce ("watchdog: f71808e_wdt: new watchdog driver for Fintek F71808E and F71882FG")
Suggested-by: Guenter Roeck <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Signed-off-by: Ahmad Fatoum <[email protected]>
Link: https://lore.kernel.org/r/5e17960fe8cc0e3cb2ba53de4730b75d9a0f33d5.1628525954.git-series.a.fatoum@pengutronix.de
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Wim Van Sebroeck <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/watchdog/f71808e_wdt.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/watchdog/f71808e_wdt.c b/drivers/watchdog/f71808e_wdt.c
index ae4974701e5c7..6fe9daf2367b5 100644
--- a/drivers/watchdog/f71808e_wdt.c
+++ b/drivers/watchdog/f71808e_wdt.c
@@ -237,15 +237,17 @@ static int watchdog_set_timeout(int timeout)
mutex_lock(&watchdog.lock);
- watchdog.timeout = timeout;
if (timeout > 0xff) {
watchdog.timer_val = DIV_ROUND_UP(timeout, 60);
watchdog.minutes_mode = true;
+ timeout = watchdog.timer_val * 60;
} else {
watchdog.timer_val = timeout;
watchdog.minutes_mode = false;
}
+ watchdog.timeout = timeout;
+
mutex_unlock(&watchdog.lock);
return 0;
--
2.33.0
From: "Naveen N. Rao" <[email protected]>
upstream commit 5855c4c1f415ca3ba1046e77c0b3d3dfc96c9025
We aren't handling subtraction involving an immediate value of
0x80000000 properly. Fix the same.
Fixes: 156d0e290e969c ("powerpc/ebpf/jit: Implement JIT compiler for extended BPF")
Signed-off-by: Naveen N. Rao <[email protected]>
Reviewed-by: Christophe Leroy <[email protected]>
[mpe: Fold in fix from Naveen to use imm <= 32768]
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/fc4b1276eb10761fd7ce0814c8dd089da2815251.1633464148.git.naveen.n.rao@linux.vnet.ibm.com
[adjust macros to account for commits 0654186510a40e and 3a181237916310]
Signed-off-by: Naveen N. Rao <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/net/bpf_jit_comp64.c | 27 +++++++++++++++++----------
1 file changed, 17 insertions(+), 10 deletions(-)
--- a/arch/powerpc/net/bpf_jit_comp64.c
+++ b/arch/powerpc/net/bpf_jit_comp64.c
@@ -359,18 +359,25 @@ static int bpf_jit_build_body(struct bpf
PPC_SUB(dst_reg, dst_reg, src_reg);
goto bpf_alu32_trunc;
case BPF_ALU | BPF_ADD | BPF_K: /* (u32) dst += (u32) imm */
- case BPF_ALU | BPF_SUB | BPF_K: /* (u32) dst -= (u32) imm */
case BPF_ALU64 | BPF_ADD | BPF_K: /* dst += imm */
+ if (!imm) {
+ goto bpf_alu32_trunc;
+ } else if (imm >= -32768 && imm < 32768) {
+ PPC_ADDI(dst_reg, dst_reg, IMM_L(imm));
+ } else {
+ PPC_LI32(b2p[TMP_REG_1], imm);
+ PPC_ADD(dst_reg, dst_reg, b2p[TMP_REG_1]);
+ }
+ goto bpf_alu32_trunc;
+ case BPF_ALU | BPF_SUB | BPF_K: /* (u32) dst -= (u32) imm */
case BPF_ALU64 | BPF_SUB | BPF_K: /* dst -= imm */
- if (BPF_OP(code) == BPF_SUB)
- imm = -imm;
- if (imm) {
- if (imm >= -32768 && imm < 32768)
- PPC_ADDI(dst_reg, dst_reg, IMM_L(imm));
- else {
- PPC_LI32(b2p[TMP_REG_1], imm);
- PPC_ADD(dst_reg, dst_reg, b2p[TMP_REG_1]);
- }
+ if (!imm) {
+ goto bpf_alu32_trunc;
+ } else if (imm > -32768 && imm <= 32768) {
+ PPC_ADDI(dst_reg, dst_reg, IMM_L(-imm));
+ } else {
+ PPC_LI32(b2p[TMP_REG_1], imm);
+ PPC_SUB(dst_reg, dst_reg, b2p[TMP_REG_1]);
}
goto bpf_alu32_trunc;
case BPF_ALU | BPF_MUL | BPF_X: /* (u32) dst *= (u32) src */
From: Vasily Averin <[email protected]>
commit 0b28179a6138a5edd9d82ad2687c05b3773c387b upstream.
Patch series "memcg: prohibit unconditional exceeding the limit of dying tasks", v3.
Memory cgroup charging allows killed or exiting tasks to exceed the hard
limit. It can be misused and allowed to trigger global OOM from inside
a memcg-limited container. On the other hand if memcg fails allocation,
called from inside #PF handler it triggers global OOM from inside
pagefault_out_of_memory().
To prevent these problems this patchset:
(a) removes execution of out_of_memory() from
pagefault_out_of_memory(), becasue nobody can explain why it is
necessary.
(b) allow memcg to fail allocation of dying/killed tasks.
This patch (of 3):
Any allocation failure during the #PF path will return with VM_FAULT_OOM
which in turn results in pagefault_out_of_memory which in turn executes
out_out_memory() and can kill a random task.
An allocation might fail when the current task is the oom victim and
there are no memory reserves left. The OOM killer is already handled at
the page allocator level for the global OOM and at the charging level
for the memcg one. Both have much more information about the scope of
allocation/charge request. This means that either the OOM killer has
been invoked properly and didn't lead to the allocation success or it
has been skipped because it couldn't have been invoked. In both cases
triggering it from here is pointless and even harmful.
It makes much more sense to let the killed task die rather than to wake
up an eternally hungry oom-killer and send him to choose a fatter victim
for breakfast.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Vasily Averin <[email protected]>
Suggested-by: Michal Hocko <[email protected]>
Acked-by: Michal Hocko <[email protected]>
Cc: Johannes Weiner <[email protected]>
Cc: Mel Gorman <[email protected]>
Cc: Roman Gushchin <[email protected]>
Cc: Shakeel Butt <[email protected]>
Cc: Tetsuo Handa <[email protected]>
Cc: Uladzislau Rezki <[email protected]>
Cc: Vladimir Davydov <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/oom_kill.c | 3 +++
1 file changed, 3 insertions(+)
--- a/mm/oom_kill.c
+++ b/mm/oom_kill.c
@@ -1112,6 +1112,9 @@ void pagefault_out_of_memory(void)
if (mem_cgroup_oom_synchronize(true))
return;
+ if (fatal_signal_pending(current))
+ return;
+
if (!mutex_trylock(&oom_lock))
return;
out_of_memory(&oc);
From: Vineeth Vijayan <[email protected]>
commit a4751f157c194431fae9e9c493f456df8272b871 upstream.
Check the validity of subchanel before reading other fields in
the schib.
Fixes: d3683c055212 ("s390/cio: add dev_busid sysfs entry for each subchannel")
CC: <[email protected]>
Reported-by: Cornelia Huck <[email protected]>
Signed-off-by: Vineeth Vijayan <[email protected]>
Reviewed-by: Cornelia Huck <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vasily Gorbik <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/s390/cio/css.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/s390/cio/css.c
+++ b/drivers/s390/cio/css.c
@@ -337,8 +337,8 @@ static ssize_t dev_busid_show(struct dev
struct subchannel *sch = to_subchannel(dev);
struct pmcw *pmcw = &sch->schib.pmcw;
- if ((pmcw->st == SUBCHANNEL_TYPE_IO ||
- pmcw->st == SUBCHANNEL_TYPE_MSG) && pmcw->dnv)
+ if ((pmcw->st == SUBCHANNEL_TYPE_IO && pmcw->dnv) ||
+ (pmcw->st == SUBCHANNEL_TYPE_MSG && pmcw->w))
return sysfs_emit(buf, "0.%x.%04x\n", sch->schid.ssid,
pmcw->dev);
else
From: Michal Hocko <[email protected]>
commit 60e2793d440a3ec95abb5d6d4fc034a4b480472d upstream.
Any allocation failure during the #PF path will return with VM_FAULT_OOM
which in turn results in pagefault_out_of_memory. This can happen for 2
different reasons. a) Memcg is out of memory and we rely on
mem_cgroup_oom_synchronize to perform the memcg OOM handling or b)
normal allocation fails.
The latter is quite problematic because allocation paths already trigger
out_of_memory and the page allocator tries really hard to not fail
allocations. Anyway, if the OOM killer has been already invoked there
is no reason to invoke it again from the #PF path. Especially when the
OOM condition might be gone by that time and we have no way to find out
other than allocate.
Moreover if the allocation failed and the OOM killer hasn't been invoked
then we are unlikely to do the right thing from the #PF context because
we have already lost the allocation context and restictions and
therefore might oom kill a task from a different NUMA domain.
This all suggests that there is no legitimate reason to trigger
out_of_memory from pagefault_out_of_memory so drop it. Just to be sure
that no #PF path returns with VM_FAULT_OOM without allocation print a
warning that this is happening before we restart the #PF.
[VvS: #PF allocation can hit into limit of cgroup v1 kmem controller.
This is a local problem related to memcg, however, it causes unnecessary
global OOM kills that are repeated over and over again and escalate into a
real disaster. This has been broken since kmem accounting has been
introduced for cgroup v1 (3.8). There was no kmem specific reclaim for
the separate limit so the only way to handle kmem hard limit was to return
with ENOMEM. In upstream the problem will be fixed by removing the
outdated kmem limit, however stable and LTS kernels cannot do it and are
still affected. This patch fixes the problem and should be backported
into stable/LTS.]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Michal Hocko <[email protected]>
Signed-off-by: Vasily Averin <[email protected]>
Acked-by: Michal Hocko <[email protected]>
Cc: Johannes Weiner <[email protected]>
Cc: Mel Gorman <[email protected]>
Cc: Roman Gushchin <[email protected]>
Cc: Shakeel Butt <[email protected]>
Cc: Tetsuo Handa <[email protected]>
Cc: Uladzislau Rezki <[email protected]>
Cc: Vladimir Davydov <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/oom_kill.c | 22 ++++++++--------------
1 file changed, 8 insertions(+), 14 deletions(-)
--- a/mm/oom_kill.c
+++ b/mm/oom_kill.c
@@ -1095,19 +1095,15 @@ bool out_of_memory(struct oom_control *o
}
/*
- * The pagefault handler calls here because it is out of memory, so kill a
- * memory-hogging task. If oom_lock is held by somebody else, a parallel oom
- * killing is already in progress so do nothing.
+ * The pagefault handler calls here because some allocation has failed. We have
+ * to take care of the memcg OOM here because this is the only safe context without
+ * any locks held but let the oom killer triggered from the allocation context care
+ * about the global OOM.
*/
void pagefault_out_of_memory(void)
{
- struct oom_control oc = {
- .zonelist = NULL,
- .nodemask = NULL,
- .memcg = NULL,
- .gfp_mask = 0,
- .order = 0,
- };
+ static DEFINE_RATELIMIT_STATE(pfoom_rs, DEFAULT_RATELIMIT_INTERVAL,
+ DEFAULT_RATELIMIT_BURST);
if (mem_cgroup_oom_synchronize(true))
return;
@@ -1115,8 +1111,6 @@ void pagefault_out_of_memory(void)
if (fatal_signal_pending(current))
return;
- if (!mutex_trylock(&oom_lock))
- return;
- out_of_memory(&oc);
- mutex_unlock(&oom_lock);
+ if (__ratelimit(&pfoom_rs))
+ pr_warn("Huh VM_FAULT_OOM leaked out to the #PF handler. Retrying PF\n");
}
From: Paul Burton <[email protected]>
commit 4030a6e6a6a4a42ff8c18414c9e0c93e24cc70b8 upstream.
Currently tgid_map is sized at PID_MAX_DEFAULT entries, which means that
on systems where pid_max is configured higher than PID_MAX_DEFAULT the
ftrace record-tgid option doesn't work so well. Any tasks with PIDs
higher than PID_MAX_DEFAULT are simply not recorded in tgid_map, and
don't show up in the saved_tgids file.
In particular since systemd v243 & above configure pid_max to its
highest possible 1<<22 value by default on 64 bit systems this renders
the record-tgids option of little use.
Increase the size of tgid_map to the configured pid_max instead,
allowing it to cover the full range of PIDs up to the maximum value of
PID_MAX_LIMIT if the system is configured that way.
On 64 bit systems with pid_max == PID_MAX_LIMIT this will increase the
size of tgid_map from 256KiB to 16MiB. Whilst this 64x increase in
memory overhead sounds significant 64 bit systems are presumably best
placed to accommodate it, and since tgid_map is only allocated when the
record-tgid option is actually used presumably the user would rather it
spends sufficient memory to actually record the tgids they expect.
The size of tgid_map could also increase for CONFIG_BASE_SMALL=y
configurations, but these seem unlikely to be systems upon which people
are both configuring a large pid_max and running ftrace with record-tgid
anyway.
Of note is that we only allocate tgid_map once, the first time that the
record-tgid option is enabled. Therefore its size is only set once, to
the value of pid_max at the time the record-tgid option is first
enabled. If a user increases pid_max after that point, the saved_tgids
file will not contain entries for any tasks with pids beyond the earlier
value of pid_max.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: d914ba37d714 ("tracing: Add support for recording tgid of tasks")
Cc: Ingo Molnar <[email protected]>
Cc: Joel Fernandes <[email protected]>
Cc: <[email protected]>
Signed-off-by: Paul Burton <[email protected]>
[ Fixed comment coding style ]
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/trace/trace.c | 62 ++++++++++++++++++++++++++++++++++++++-------------
1 file changed, 47 insertions(+), 15 deletions(-)
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -1723,8 +1723,15 @@ void tracing_reset_all_online_cpus(void)
}
}
+/*
+ * The tgid_map array maps from pid to tgid; i.e. the value stored at index i
+ * is the tgid last observed corresponding to pid=i.
+ */
static int *tgid_map;
+/* The maximum valid index into tgid_map. */
+static size_t tgid_map_max;
+
#define SAVED_CMDLINES_DEFAULT 128
#define NO_CMDLINE_MAP UINT_MAX
static arch_spinlock_t trace_cmdline_lock = __ARCH_SPIN_LOCK_UNLOCKED;
@@ -1996,24 +2003,41 @@ void trace_find_cmdline(int pid, char co
preempt_enable();
}
+static int *trace_find_tgid_ptr(int pid)
+{
+ /*
+ * Pairs with the smp_store_release in set_tracer_flag() to ensure that
+ * if we observe a non-NULL tgid_map then we also observe the correct
+ * tgid_map_max.
+ */
+ int *map = smp_load_acquire(&tgid_map);
+
+ if (unlikely(!map || pid > tgid_map_max))
+ return NULL;
+
+ return &map[pid];
+}
+
int trace_find_tgid(int pid)
{
- if (unlikely(!tgid_map || !pid || pid > PID_MAX_DEFAULT))
- return 0;
+ int *ptr = trace_find_tgid_ptr(pid);
- return tgid_map[pid];
+ return ptr ? *ptr : 0;
}
static int trace_save_tgid(struct task_struct *tsk)
{
+ int *ptr;
+
/* treat recording of idle task as a success */
if (!tsk->pid)
return 1;
- if (unlikely(!tgid_map || tsk->pid > PID_MAX_DEFAULT))
+ ptr = trace_find_tgid_ptr(tsk->pid);
+ if (!ptr)
return 0;
- tgid_map[tsk->pid] = tsk->tgid;
+ *ptr = tsk->tgid;
return 1;
}
@@ -4353,6 +4377,8 @@ int trace_keep_overwrite(struct tracer *
int set_tracer_flag(struct trace_array *tr, unsigned int mask, int enabled)
{
+ int *map;
+
if ((mask == TRACE_ITER_RECORD_TGID) ||
(mask == TRACE_ITER_RECORD_CMD))
lockdep_assert_held(&event_mutex);
@@ -4375,9 +4401,19 @@ int set_tracer_flag(struct trace_array *
trace_event_enable_cmd_record(enabled);
if (mask == TRACE_ITER_RECORD_TGID) {
- if (!tgid_map)
- tgid_map = kzalloc((PID_MAX_DEFAULT + 1) * sizeof(*tgid_map),
- GFP_KERNEL);
+ if (!tgid_map) {
+ tgid_map_max = pid_max;
+ map = kzalloc((tgid_map_max + 1) * sizeof(*tgid_map),
+ GFP_KERNEL);
+
+ /*
+ * Pairs with smp_load_acquire() in
+ * trace_find_tgid_ptr() to ensure that if it observes
+ * the tgid_map we just allocated then it also observes
+ * the corresponding tgid_map_max value.
+ */
+ smp_store_release(&tgid_map, map);
+ }
if (!tgid_map) {
tr->trace_flags &= ~TRACE_ITER_RECORD_TGID;
return -ENOMEM;
@@ -4752,18 +4788,14 @@ static void *saved_tgids_next(struct seq
{
int pid = ++(*pos);
- if (pid > PID_MAX_DEFAULT)
- return NULL;
-
- return &tgid_map[pid];
+ return trace_find_tgid_ptr(pid);
}
static void *saved_tgids_start(struct seq_file *m, loff_t *pos)
{
- if (!tgid_map || *pos > PID_MAX_DEFAULT)
- return NULL;
+ int pid = *pos;
- return &tgid_map[*pos];
+ return trace_find_tgid_ptr(pid);
}
static void saved_tgids_stop(struct seq_file *m, void *v)
From: Pali Rohár <[email protected]>
commit 460275f124fb072dca218a6b43b6370eebbab20d upstream.
Define a macro PCI_EXP_DEVCTL_PAYLOAD_* for every possible Max Payload
Size in linux/pci_regs.h, in the same style as PCI_EXP_DEVCTL_READRQ_*.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Pali Rohár <[email protected]>
Signed-off-by: Marek Behún <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Reviewed-by: Marek Behún <[email protected]>
Reviewed-by: Bjorn Helgaas <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/uapi/linux/pci_regs.h | 6 ++++++
1 file changed, 6 insertions(+)
--- a/include/uapi/linux/pci_regs.h
+++ b/include/uapi/linux/pci_regs.h
@@ -497,6 +497,12 @@
#define PCI_EXP_DEVCTL_URRE 0x0008 /* Unsupported Request Reporting En. */
#define PCI_EXP_DEVCTL_RELAX_EN 0x0010 /* Enable relaxed ordering */
#define PCI_EXP_DEVCTL_PAYLOAD 0x00e0 /* Max_Payload_Size */
+#define PCI_EXP_DEVCTL_PAYLOAD_128B 0x0000 /* 128 Bytes */
+#define PCI_EXP_DEVCTL_PAYLOAD_256B 0x0020 /* 256 Bytes */
+#define PCI_EXP_DEVCTL_PAYLOAD_512B 0x0040 /* 512 Bytes */
+#define PCI_EXP_DEVCTL_PAYLOAD_1024B 0x0060 /* 1024 Bytes */
+#define PCI_EXP_DEVCTL_PAYLOAD_2048B 0x0080 /* 2048 Bytes */
+#define PCI_EXP_DEVCTL_PAYLOAD_4096B 0x00a0 /* 4096 Bytes */
#define PCI_EXP_DEVCTL_EXT_TAG 0x0100 /* Extended Tag Field Enable */
#define PCI_EXP_DEVCTL_PHANTOM 0x0200 /* Phantom Functions Enable */
#define PCI_EXP_DEVCTL_AUX_PME 0x0400 /* Auxiliary Power PM Enable */
From: Shaoying Xu <[email protected]>
commit 39fec6889d15a658c3a3ebb06fd69d3584ddffd3 upstream.
Ext4 file system has default lazy inode table initialization setup once
it is mounted. However, it has issue on computing the next schedule time
that makes the timeout same amount in jiffies but different real time in
secs if with various HZ values. Therefore, fix by measuring the current
time in a more granular unit nanoseconds and make the next schedule time
independent of the HZ value.
Fixes: bfff68738f1c ("ext4: add support for lazy inode table initialization")
Signed-off-by: Shaoying Xu <[email protected]>
Cc: [email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/super.c | 9 ++++-----
1 file changed, 4 insertions(+), 5 deletions(-)
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -2952,8 +2952,8 @@ static int ext4_run_li_request(struct ex
struct ext4_group_desc *gdp = NULL;
ext4_group_t group, ngroups;
struct super_block *sb;
- unsigned long timeout = 0;
int ret = 0;
+ u64 start_time;
sb = elr->lr_super;
ngroups = EXT4_SB(sb)->s_groups_count;
@@ -2973,13 +2973,12 @@ static int ext4_run_li_request(struct ex
ret = 1;
if (!ret) {
- timeout = jiffies;
+ start_time = ktime_get_real_ns();
ret = ext4_init_inode_table(sb, group,
elr->lr_timeout ? 0 : 1);
if (elr->lr_timeout == 0) {
- timeout = (jiffies - timeout) *
- elr->lr_sbi->s_li_wait_mult;
- elr->lr_timeout = timeout;
+ elr->lr_timeout = nsecs_to_jiffies((ktime_get_real_ns() - start_time) *
+ elr->lr_sbi->s_li_wait_mult);
}
elr->lr_next_sched = jiffies + elr->lr_timeout;
elr->lr_next_group = group + 1;
From: Sven Schnelle <[email protected]>
commit 3ec18fc7831e7d79e2d536dd1f3bc0d3ba425e8a upstream.
commit 8779e05ba8aa ("parisc: Fix ptrace check on syscall return")
fixed testing of TI_FLAGS. This uncovered a bug in the test mask.
syscall_restore_rfi is only used when the kernel needs to exit to
usespace with single or block stepping and the recovery counter
enabled. The test however used _TIF_SYSCALL_TRACE_MASK, which
includes a lot of bits that shouldn't be tested here.
Fix this by using TIF_SINGLESTEP and TIF_BLOCKSTEP directly.
I encountered this bug by enabling syscall tracepoints. Both in qemu and
on real hardware. As soon as i enabled the tracepoint (sys_exit_read,
but i guess it doesn't really matter which one), i got random page
faults in userspace almost immediately.
Signed-off-by: Sven Schnelle <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/parisc/kernel/entry.S | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/parisc/kernel/entry.S
+++ b/arch/parisc/kernel/entry.S
@@ -1850,7 +1850,7 @@ syscall_restore:
/* Are we being ptraced? */
LDREG TI_FLAGS-THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r19
- ldi _TIF_SYSCALL_TRACE_MASK,%r2
+ ldi _TIF_SINGLESTEP|_TIF_BLOCKSTEP,%r2
and,COND(=) %r19,%r2,%r0
b,n syscall_restore_rfi
From: Thomas Gleixner <[email protected]>
commit 3735459037114d31e5acd9894fad9aed104231a0 upstream.
free_msi_irqs() frees the MSI entries before destroying the sysfs entries
which are exposing them. Nothing prevents a concurrent free while a sysfs
file is read and accesses the possibly freed entry.
Move the sysfs release ahead of freeing the entries.
Fixes: 1c51b50c2995 ("PCI/MSI: Export MSI mode using attributes, not kobjects")
Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by: Greg Kroah-Hartman <[email protected]>
Cc: Bjorn Helgaas <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/87sfw5305m.ffs@tglx
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/msi.c | 24 ++++++++++++------------
1 file changed, 12 insertions(+), 12 deletions(-)
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -372,18 +372,6 @@ static void free_msi_irqs(struct pci_dev
for (i = 0; i < entry->nvec_used; i++)
BUG_ON(irq_has_action(entry->irq + i));
- pci_msi_teardown_msi_irqs(dev);
-
- list_for_each_entry_safe(entry, tmp, msi_list, list) {
- if (entry->msi_attrib.is_msix) {
- if (list_is_last(&entry->list, msi_list))
- iounmap(entry->mask_base);
- }
-
- list_del(&entry->list);
- free_msi_entry(entry);
- }
-
if (dev->msi_irq_groups) {
sysfs_remove_groups(&dev->dev.kobj, dev->msi_irq_groups);
msi_attrs = dev->msi_irq_groups[0]->attrs;
@@ -399,6 +387,18 @@ static void free_msi_irqs(struct pci_dev
kfree(dev->msi_irq_groups);
dev->msi_irq_groups = NULL;
}
+
+ pci_msi_teardown_msi_irqs(dev);
+
+ list_for_each_entry_safe(entry, tmp, msi_list, list) {
+ if (entry->msi_attrib.is_msix) {
+ if (list_is_last(&entry->list, msi_list))
+ iounmap(entry->mask_base);
+ }
+
+ list_del(&entry->list);
+ free_msi_entry(entry);
+ }
}
static void pci_intx_for_msi(struct pci_dev *dev, int enable)
From: James Smart <[email protected]>
[ Upstream commit 99154581b05c8fb22607afb7c3d66c1bace6aa5d ]
When parsing the txq list in lpfc_drain_txq(), the driver attempts to pass
the requests to the adapter. If such an attempt fails, a local "fail_msg"
string is set and a log message output. The job is then added to a
completions list for cancellation.
Processing of any further jobs from the txq list continues, but since
"fail_msg" remains set, jobs are added to the completions list regardless
of whether a wqe was passed to the adapter. If successfully added to
txcmplq, jobs are added to both lists resulting in list corruption.
Fix by clearing the fail_msg string after adding a job to the completions
list. This stops the subsequent jobs from being added to the completions
list unless they had an appropriate failure.
Link: https://lore.kernel.org/r/[email protected]
Co-developed-by: Justin Tee <[email protected]>
Signed-off-by: Justin Tee <[email protected]>
Signed-off-by: James Smart <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/lpfc/lpfc_sli.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 20deb6715c36e..6f9ba3272721a 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -18777,6 +18777,7 @@ lpfc_drain_txq(struct lpfc_hba *phba)
fail_msg,
piocbq->iotag, piocbq->sli4_xritag);
list_add_tail(&piocbq->list, &completions);
+ fail_msg = NULL;
}
spin_unlock_irqrestore(&pring->ring_lock, iflags);
}
--
2.33.0
From: Michal Simek <[email protected]>
[ Upstream commit 812fa2f0e9d33564bd0131a69750e0d165f4c82a ]
Based on commit 65a2c14d4f00 ("dt-bindings: serial: convert Cadence UART
bindings to YAML") compatible string should look like differently that's
why fix it to be aligned with dt binding.
Signed-off-by: Michal Simek <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Link: https://lore.kernel.org/r/89b36e0a6187cc6b05b27a035efdf79173bd4486.1628240307.git.michal.simek@xilinx.com
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
index 0531843117f46..58028f23ad9aa 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
+++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
@@ -573,7 +573,7 @@
};
uart0: serial@ff000000 {
- compatible = "cdns,uart-r1p12", "xlnx,xuartps";
+ compatible = "xlnx,zynqmp-uart", "cdns,uart-r1p12";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 21 4>;
@@ -582,7 +582,7 @@
};
uart1: serial@ff010000 {
- compatible = "cdns,uart-r1p12", "xlnx,xuartps";
+ compatible = "xlnx,zynqmp-uart", "cdns,uart-r1p12";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 22 4>;
--
2.33.0
From: Jackie Liu <[email protected]>
[ Upstream commit 28b7ee33a2122569ac065cad578bf23f50cc65c3 ]
TI AR7 Watchdog Timer is only build for 32bit.
Avoid error like:
In file included from drivers/watchdog/ar7_wdt.c:29:
./arch/mips/include/asm/mach-ar7/ar7.h: In function ‘ar7_is_titan’:
./arch/mips/include/asm/mach-ar7/ar7.h:111:24: error: implicit declaration of function ‘KSEG1ADDR’; did you mean ‘CKSEG1ADDR’? [-Werror=implicit-function-declaration]
111 | return (readl((void *)KSEG1ADDR(AR7_REGS_GPIO + 0x24)) & 0xffff) ==
| ^~~~~~~~~
| CKSEG1ADDR
Fixes: da2a68b3eb47 ("watchdog: Enable COMPILE_TEST where possible")
Signed-off-by: Jackie Liu <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Wim Van Sebroeck <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/watchdog/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index de228669a2c8b..8cb663ecbacc6 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -1499,7 +1499,7 @@ config SIBYTE_WDOG
config AR7_WDT
tristate "TI AR7 Watchdog Timer"
- depends on AR7 || (MIPS && COMPILE_TEST)
+ depends on AR7 || (MIPS && 32BIT && COMPILE_TEST)
help
Hardware driver for the TI AR7 Watchdog Timer.
--
2.33.0
From: Yang Yingliang <[email protected]>
[ Upstream commit 14651496a3de6807a17c310f63c894ea0c5d858e ]
It will cause null-ptr-deref if platform_get_resource() returns NULL,
we need check the return value.
Signed-off-by: Yang Yingliang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/musb/tusb6010.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c
index 7d7cb1c5ec808..9a7b5b2d7ccc7 100644
--- a/drivers/usb/musb/tusb6010.c
+++ b/drivers/usb/musb/tusb6010.c
@@ -1108,6 +1108,11 @@ static int tusb_musb_init(struct musb *musb)
/* dma address for async dma */
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!mem) {
+ pr_debug("no async dma resource?\n");
+ ret = -ENODEV;
+ goto done;
+ }
musb->async = mem->start;
/* dma address for sync dma */
--
2.33.0
From: Guo Zhi <[email protected]>
[ Upstream commit d4996c6eac4c81b8872043e9391563f67f13e406 ]
Pointers should be printed with %p or %px rather than cast to 'unsigned
long' and printed with %lx.
Change %lx to %p to print the hashed pointer.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Guo Zhi <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/advansys.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c
index 24e57e770432b..6efd17692a55a 100644
--- a/drivers/scsi/advansys.c
+++ b/drivers/scsi/advansys.c
@@ -3370,8 +3370,8 @@ static void asc_prt_adv_board_info(struct seq_file *m, struct Scsi_Host *shost)
shost->host_no);
seq_printf(m,
- " iop_base 0x%lx, cable_detect: %X, err_code %u\n",
- (unsigned long)v->iop_base,
+ " iop_base 0x%p, cable_detect: %X, err_code %u\n",
+ v->iop_base,
AdvReadWordRegister(iop_base,IOPW_SCSI_CFG1) & CABLE_DETECT,
v->err_code);
--
2.33.0
From: Quinn Tran <[email protected]>
[ Upstream commit 0b7a9fd934a68ebfc1019811b7bdc1742072ad7b ]
When user uses issue_lip to do link bounce, driver sends additional target
reset to remote device before resetting the link. The target reset would
affect other paths with active I/Os. This patch will remove the unnecessary
target reset.
Link: https://lore.kernel.org/r/[email protected]
Fixes: 5854771e314e ("[SCSI] qla2xxx: Add ISPFX00 specific bus reset routine")
Reviewed-by: Himanshu Madhani <[email protected]>
Signed-off-by: Quinn Tran <[email protected]>
Signed-off-by: Nilesh Javali <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/qla2xxx/qla_gbl.h | 2 --
drivers/scsi/qla2xxx/qla_mr.c | 23 -----------------------
drivers/scsi/qla2xxx/qla_os.c | 27 ++-------------------------
3 files changed, 2 insertions(+), 50 deletions(-)
diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
index 89706341514e2..a9df91f7c1543 100644
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -132,7 +132,6 @@ extern int ql2xasynctmfenable;
extern int ql2xgffidenable;
extern int ql2xenabledif;
extern int ql2xenablehba_err_chk;
-extern int ql2xtargetreset;
extern int ql2xdontresethba;
extern uint64_t ql2xmaxlun;
extern int ql2xmdcapmask;
@@ -724,7 +723,6 @@ extern void qlafx00_abort_iocb(srb_t *, struct abort_iocb_entry_fx00 *);
extern void qlafx00_fxdisc_iocb(srb_t *, struct fxdisc_entry_fx00 *);
extern void qlafx00_timer_routine(scsi_qla_host_t *);
extern int qlafx00_rescan_isp(scsi_qla_host_t *);
-extern int qlafx00_loop_reset(scsi_qla_host_t *vha);
/* qla82xx related functions */
diff --git a/drivers/scsi/qla2xxx/qla_mr.c b/drivers/scsi/qla2xxx/qla_mr.c
index e23a3d4c36f39..66ee206026612 100644
--- a/drivers/scsi/qla2xxx/qla_mr.c
+++ b/drivers/scsi/qla2xxx/qla_mr.c
@@ -739,29 +739,6 @@ qlafx00_lun_reset(fc_port_t *fcport, uint64_t l, int tag)
return qla2x00_async_tm_cmd(fcport, TCF_LUN_RESET, l, tag);
}
-int
-qlafx00_loop_reset(scsi_qla_host_t *vha)
-{
- int ret;
- struct fc_port *fcport;
- struct qla_hw_data *ha = vha->hw;
-
- if (ql2xtargetreset) {
- list_for_each_entry(fcport, &vha->vp_fcports, list) {
- if (fcport->port_type != FCT_TARGET)
- continue;
-
- ret = ha->isp_ops->target_reset(fcport, 0, 0);
- if (ret != QLA_SUCCESS) {
- ql_dbg(ql_dbg_taskm, vha, 0x803d,
- "Bus Reset failed: Reset=%d "
- "d_id=%x.\n", ret, fcport->d_id.b24);
- }
- }
- }
- return QLA_SUCCESS;
-}
-
int
qlafx00_iospace_config(struct qla_hw_data *ha)
{
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index ea60c6e603c06..d0f52c123bfb3 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -188,12 +188,6 @@ MODULE_PARM_DESC(ql2xdbwr,
" 0 -- Regular doorbell.\n"
" 1 -- CAMRAM doorbell (faster).\n");
-int ql2xtargetreset = 1;
-module_param(ql2xtargetreset, int, S_IRUGO);
-MODULE_PARM_DESC(ql2xtargetreset,
- "Enable target reset."
- "Default is 1 - use hw defaults.");
-
int ql2xgffidenable;
module_param(ql2xgffidenable, int, S_IRUGO);
MODULE_PARM_DESC(ql2xgffidenable,
@@ -1652,27 +1646,10 @@ int
qla2x00_loop_reset(scsi_qla_host_t *vha)
{
int ret;
- struct fc_port *fcport;
struct qla_hw_data *ha = vha->hw;
- if (IS_QLAFX00(ha)) {
- return qlafx00_loop_reset(vha);
- }
-
- if (ql2xtargetreset == 1 && ha->flags.enable_target_reset) {
- list_for_each_entry(fcport, &vha->vp_fcports, list) {
- if (fcport->port_type != FCT_TARGET)
- continue;
-
- ret = ha->isp_ops->target_reset(fcport, 0, 0);
- if (ret != QLA_SUCCESS) {
- ql_dbg(ql_dbg_taskm, vha, 0x802c,
- "Bus Reset failed: Reset=%d "
- "d_id=%x.\n", ret, fcport->d_id.b24);
- }
- }
- }
-
+ if (IS_QLAFX00(ha))
+ return QLA_SUCCESS;
if (ha->flags.enable_lip_full_login && !IS_CNA_CAPABLE(ha)) {
atomic_set(&vha->loop_state, LOOP_DOWN);
--
2.33.0
From: Roger Quadros <[email protected]>
[ Upstream commit 51b9e22ffd3c4c56cbb7caae9750f70e55ffa603 ]
gpmc,mux-add-data is not boolean.
Fixes the below errors flagged by dtbs_check.
"ethernet@4,0:gpmc,mux-add-data: True is not of type 'array'"
Signed-off-by: Roger Quadros <[email protected]>
Signed-off-by: Tony Lindgren <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi | 2 +-
arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi b/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi
index 7f6aefd134514..e7534fe9c53cf 100644
--- a/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi
+++ b/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi
@@ -29,7 +29,7 @@
compatible = "smsc,lan9221","smsc,lan9115";
bank-width = <2>;
- gpmc,mux-add-data;
+ gpmc,mux-add-data = <0>;
gpmc,cs-on-ns = <0>;
gpmc,cs-rd-off-ns = <42>;
gpmc,cs-wr-off-ns = <36>;
diff --git a/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi b/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi
index 82e98ee3023ad..3dbeb7a6c569c 100644
--- a/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi
@@ -25,7 +25,7 @@
compatible = "smsc,lan9221","smsc,lan9115";
bank-width = <2>;
- gpmc,mux-add-data;
+ gpmc,mux-add-data = <0>;
gpmc,cs-on-ns = <0>;
gpmc,cs-rd-off-ns = <42>;
gpmc,cs-wr-off-ns = <36>;
--
2.33.0
From: Yang Yingliang <[email protected]>
[ Upstream commit 9eff2b2e59fda25051ab36cd1cb5014661df657b ]
It will cause null-ptr-deref if platform_get_resource() returns NULL,
we need check the return value.
Acked-by: Alan Stern <[email protected]>
Signed-off-by: Yang Yingliang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/host/ohci-tmio.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/host/ohci-tmio.c b/drivers/usb/host/ohci-tmio.c
index 0cf4b6dc89720..4c7846dc5eed1 100644
--- a/drivers/usb/host/ohci-tmio.c
+++ b/drivers/usb/host/ohci-tmio.c
@@ -199,7 +199,7 @@ static int ohci_hcd_tmio_drv_probe(struct platform_device *dev)
if (usb_disabled())
return -ENODEV;
- if (!cell)
+ if (!cell || !regs || !config || !sram)
return -EINVAL;
if (irq < 0)
--
2.33.0
From: Christophe JAILLET <[email protected]>
[ Upstream commit 7f98960c046ee1136e7096aee168eda03aef8a5d ]
A successful 'clk_prepare()' call should be balanced by a corresponding
'clk_unprepare()' call in the error handling path of the probe, as already
done in the remove function.
More specifically, 'clk_prepare_enable()' is used, but 'clk_disable()' is
also already called. So just the unprepare step has still to be done.
Update the error handling path accordingly.
Fixes: 75d31c2372e4 ("i2c: xlr: add support for Sigma Designs controller variant")
Signed-off-by: Christophe JAILLET <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/i2c/busses/i2c-xlr.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/i2c/busses/i2c-xlr.c b/drivers/i2c/busses/i2c-xlr.c
index 484bfa15d58ee..dc9e20941efd1 100644
--- a/drivers/i2c/busses/i2c-xlr.c
+++ b/drivers/i2c/busses/i2c-xlr.c
@@ -434,11 +434,15 @@ static int xlr_i2c_probe(struct platform_device *pdev)
i2c_set_adapdata(&priv->adap, priv);
ret = i2c_add_numbered_adapter(&priv->adap);
if (ret < 0)
- return ret;
+ goto err_unprepare_clk;
platform_set_drvdata(pdev, priv);
dev_info(&priv->adap.dev, "Added I2C Bus.\n");
return 0;
+
+err_unprepare_clk:
+ clk_unprepare(clk);
+ return ret;
}
static int xlr_i2c_remove(struct platform_device *pdev)
--
2.33.0
From: YueHaibing <[email protected]>
[ Upstream commit 4745ea2628bb43a7ec34b71763b5a56407b33990 ]
Return NULL instead of passing to ERR_PTR while err is zero,
this fix smatch warnings:
drivers/xen/xen-pciback/conf_space_capability.c:163
pm_ctrl_init() warn: passing zero to 'ERR_PTR'
Fixes: a92336a1176b ("xen/pciback: Drop two backends, squash and cleanup some code.")
Signed-off-by: YueHaibing <[email protected]>
Reviewed-by: Juergen Gross <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Boris Ostrovsky <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/xen/xen-pciback/conf_space_capability.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/xen/xen-pciback/conf_space_capability.c b/drivers/xen/xen-pciback/conf_space_capability.c
index e5694133ebe57..42f0f64fcba47 100644
--- a/drivers/xen/xen-pciback/conf_space_capability.c
+++ b/drivers/xen/xen-pciback/conf_space_capability.c
@@ -160,7 +160,7 @@ static void *pm_ctrl_init(struct pci_dev *dev, int offset)
}
out:
- return ERR_PTR(err);
+ return err ? ERR_PTR(err) : NULL;
}
static const struct config_field caplist_pm[] = {
--
2.33.0
From: Ziyang Xuan <[email protected]>
[ Upstream commit 563bcbae3ba233c275c244bfce2efe12938f5363 ]
The real_dev of a vlan net_device may be freed after
unregister_vlan_dev(). Access the real_dev continually by
vlan_dev_real_dev() will trigger the UAF problem for the
real_dev like following:
==================================================================
BUG: KASAN: use-after-free in vlan_dev_real_dev+0xf9/0x120
Call Trace:
kasan_report.cold+0x83/0xdf
vlan_dev_real_dev+0xf9/0x120
is_eth_port_of_netdev_filter.part.0+0xb1/0x2c0
is_eth_port_of_netdev_filter+0x28/0x40
ib_enum_roce_netdev+0x1a3/0x300
ib_enum_all_roce_netdevs+0xc7/0x140
netdevice_event_work_handler+0x9d/0x210
...
Freed by task 9288:
kasan_save_stack+0x1b/0x40
kasan_set_track+0x1c/0x30
kasan_set_free_info+0x20/0x30
__kasan_slab_free+0xfc/0x130
slab_free_freelist_hook+0xdd/0x240
kfree+0xe4/0x690
kvfree+0x42/0x50
device_release+0x9f/0x240
kobject_put+0x1c8/0x530
put_device+0x1b/0x30
free_netdev+0x370/0x540
ppp_destroy_interface+0x313/0x3d0
...
Move the put_device(real_dev) to vlan_dev_free(). Ensure
real_dev not be freed before vlan_dev unregistered.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: [email protected]
Signed-off-by: Ziyang Xuan <[email protected]>
Reviewed-by: Jason Gunthorpe <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/8021q/vlan.c | 3 ---
net/8021q/vlan_dev.c | 3 +++
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/net/8021q/vlan.c b/net/8021q/vlan.c
index 0efdf83f78e7a..a8cee80e07a70 100644
--- a/net/8021q/vlan.c
+++ b/net/8021q/vlan.c
@@ -112,9 +112,6 @@ void unregister_vlan_dev(struct net_device *dev, struct list_head *head)
}
vlan_vid_del(real_dev, vlan->vlan_proto, vlan_id);
-
- /* Get rid of the vlan's reference to real_dev */
- dev_put(real_dev);
}
int vlan_check_real_dev(struct net_device *real_dev,
diff --git a/net/8021q/vlan_dev.c b/net/8021q/vlan_dev.c
index ed3717dc2d201..d28c22e59996c 100644
--- a/net/8021q/vlan_dev.c
+++ b/net/8021q/vlan_dev.c
@@ -814,6 +814,9 @@ static void vlan_dev_free(struct net_device *dev)
free_percpu(vlan->vlan_pcpu_stats);
vlan->vlan_pcpu_stats = NULL;
+
+ /* Get rid of the vlan's reference to real_dev */
+ dev_put(vlan->real_dev);
}
void vlan_setup(struct net_device *dev)
--
2.33.0
From: Hans de Goede <[email protected]>
[ Upstream commit 009a789443fe4c8e6b1ecb7c16b4865c026184cd ]
The handling of PMIC register reads through writing 0 to address 4
of the OpRegion is wrong. Instead of returning the read value
through the value64, which is a no-op for function == ACPI_WRITE calls,
store the value and then on a subsequent function == ACPI_READ with
address == 3 (the address for the value field of the OpRegion)
return the stored value.
This has been tested on a Xiaomi Mi Pad 2 and makes the ACPI battery dev
there mostly functional (unfortunately there are still other issues).
Here are the SET() / GET() functions of the PMIC ACPI device,
which use this OpRegion, which clearly show the new behavior to
be correct:
OperationRegion (REGS, 0x8F, Zero, 0x50)
Field (REGS, ByteAcc, NoLock, Preserve)
{
CLNT, 8,
SA, 8,
OFF, 8,
VAL, 8,
RWM, 8
}
Method (GET, 3, Serialized)
{
If ((AVBE == One))
{
CLNT = Arg0
SA = Arg1
OFF = Arg2
RWM = Zero
If ((AVBG == One))
{
GPRW = Zero
}
}
Return (VAL) /* \_SB_.PCI0.I2C7.PMI5.VAL_ */
}
Method (SET, 4, Serialized)
{
If ((AVBE == One))
{
CLNT = Arg0
SA = Arg1
OFF = Arg2
VAL = Arg3
RWM = One
If ((AVBG == One))
{
GPRW = One
}
}
}
Fixes: 0afa877a5650 ("ACPI / PMIC: intel: add REGS operation region support")
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/acpi/pmic/intel_pmic.c | 51 +++++++++++++++++++---------------
1 file changed, 28 insertions(+), 23 deletions(-)
diff --git a/drivers/acpi/pmic/intel_pmic.c b/drivers/acpi/pmic/intel_pmic.c
index ca18e0d23df97..db63d3463617a 100644
--- a/drivers/acpi/pmic/intel_pmic.c
+++ b/drivers/acpi/pmic/intel_pmic.c
@@ -216,31 +216,36 @@ static acpi_status intel_pmic_regs_handler(u32 function,
void *handler_context, void *region_context)
{
struct intel_pmic_opregion *opregion = region_context;
- int result = 0;
+ int result = -EINVAL;
+
+ if (function == ACPI_WRITE) {
+ switch (address) {
+ case 0:
+ return AE_OK;
+ case 1:
+ opregion->ctx.addr |= (*value64 & 0xff) << 8;
+ return AE_OK;
+ case 2:
+ opregion->ctx.addr |= *value64 & 0xff;
+ return AE_OK;
+ case 3:
+ opregion->ctx.val = *value64 & 0xff;
+ return AE_OK;
+ case 4:
+ if (*value64) {
+ result = regmap_write(opregion->regmap, opregion->ctx.addr,
+ opregion->ctx.val);
+ } else {
+ result = regmap_read(opregion->regmap, opregion->ctx.addr,
+ &opregion->ctx.val);
+ }
+ opregion->ctx.addr = 0;
+ }
+ }
- switch (address) {
- case 0:
- return AE_OK;
- case 1:
- opregion->ctx.addr |= (*value64 & 0xff) << 8;
+ if (function == ACPI_READ && address == 3) {
+ *value64 = opregion->ctx.val;
return AE_OK;
- case 2:
- opregion->ctx.addr |= *value64 & 0xff;
- return AE_OK;
- case 3:
- opregion->ctx.val = *value64 & 0xff;
- return AE_OK;
- case 4:
- if (*value64) {
- result = regmap_write(opregion->regmap, opregion->ctx.addr,
- opregion->ctx.val);
- } else {
- result = regmap_read(opregion->regmap, opregion->ctx.addr,
- &opregion->ctx.val);
- if (result == 0)
- *value64 = opregion->ctx.val;
- }
- memset(&opregion->ctx, 0x00, sizeof(opregion->ctx));
}
if (result < 0) {
--
2.33.0
From: Maxim Kiselev <[email protected]>
[ Upstream commit d52bcb47bdf971a59a2467975d2405fcfcb2fa19 ]
This patch allows to use 0 for `coal->rx_coalesce_usecs` param to
disable rx irq coalescing.
Previously we could enable rx irq coalescing via ethtool
(For ex: `ethtool -C eth0 rx-usecs 2000`) but we couldn't disable
it because this part rejects 0 value:
if (!coal->rx_coalesce_usecs)
return -EINVAL;
Fixes: 84da2658a619 ("TI DaVinci EMAC : Implement interrupt pacing functionality.")
Signed-off-by: Maxim Kiselev <[email protected]>
Reviewed-by: Grygorii Strashko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/ti/davinci_emac.c | 16 ++++++++++++++--
1 file changed, 14 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/ti/davinci_emac.c b/drivers/net/ethernet/ti/davinci_emac.c
index e1ee9da38df7e..da536385075aa 100644
--- a/drivers/net/ethernet/ti/davinci_emac.c
+++ b/drivers/net/ethernet/ti/davinci_emac.c
@@ -426,8 +426,20 @@ static int emac_set_coalesce(struct net_device *ndev,
u32 int_ctrl, num_interrupts = 0;
u32 prescale = 0, addnl_dvdr = 1, coal_intvl = 0;
- if (!coal->rx_coalesce_usecs)
- return -EINVAL;
+ if (!coal->rx_coalesce_usecs) {
+ priv->coal_intvl = 0;
+
+ switch (priv->version) {
+ case EMAC_VERSION_2:
+ emac_ctrl_write(EMAC_DM646X_CMINTCTRL, 0);
+ break;
+ default:
+ emac_ctrl_write(EMAC_CTRL_EWINTTCNT, 0);
+ break;
+ }
+
+ return 0;
+ }
coal_intvl = coal->rx_coalesce_usecs;
--
2.33.0
From: Lars-Peter Clausen <[email protected]>
[ Upstream commit e7e1e880b114ca640a2f280b0d5d38aed98f98c6 ]
Before the `callback_result` callback was introduced drivers coded their
invocation to the callback in a similar way to:
if (cb->callback) {
spin_unlock(&dma->lock);
cb->callback(cb->callback_param);
spin_lock(&dma->lock);
}
With the introduction of `callback_result` two helpers where introduced to
transparently handle both types of callbacks. And drivers where updated to
look like this:
if (dmaengine_desc_callback_valid(cb)) {
spin_unlock(&dma->lock);
dmaengine_desc_callback_invoke(cb, ...);
spin_lock(&dma->lock);
}
dmaengine_desc_callback_invoke() correctly handles both `callback_result`
and `callback`. But we forgot to update the dmaengine_desc_callback_valid()
function to check for `callback_result`. As a result DMA descriptors that
use the `callback_result` rather than `callback` don't have their callback
invoked by drivers that follow the pattern above.
Fix this by checking for both `callback` and `callback_result` in
dmaengine_desc_callback_valid().
Fixes: f067025bc676 ("dmaengine: add support to provide error result from a DMA transation")
Signed-off-by: Lars-Peter Clausen <[email protected]>
Acked-by: Dave Jiang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/dma/dmaengine.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/dma/dmaengine.h b/drivers/dma/dmaengine.h
index 501c0b063f852..302f13efd35d9 100644
--- a/drivers/dma/dmaengine.h
+++ b/drivers/dma/dmaengine.h
@@ -168,7 +168,7 @@ dmaengine_desc_get_callback_invoke(struct dma_async_tx_descriptor *tx,
static inline bool
dmaengine_desc_callback_valid(struct dmaengine_desc_callback *cb)
{
- return (cb->callback) ? true : false;
+ return cb->callback || cb->callback_result;
}
#endif
--
2.33.0
From: Bart Van Assche <[email protected]>
[ Upstream commit c91cf42f61dc77b289784ea7b15a8531defa41c0 ]
This patch fixes the following gcc 10 build error:
arch/mips/sni/time.c: In function ‘a20r_set_periodic’:
arch/mips/sni/time.c:15:26: error: unsigned conversion from ‘int’ to ‘u8’ {aka ‘volatile unsigned char’} changes value from ‘576’ to ‘64’ [-Werror=overflow]
15 | #define SNI_COUNTER0_DIV ((SNI_CLOCK_TICK_RATE / SNI_COUNTER2_DIV) / HZ)
| ^
arch/mips/sni/time.c:21:45: note: in expansion of macro ‘SNI_COUNTER0_DIV’
21 | *(volatile u8 *)(A20R_PT_CLOCK_BASE + 0) = SNI_COUNTER0_DIV;
| ^~~~~~~~~~~~~~~~
Cc: [email protected]
Signed-off-by: Bart Van Assche <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/mips/sni/time.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/mips/sni/time.c b/arch/mips/sni/time.c
index 0eb7d1e8821be..d741e24a21879 100644
--- a/arch/mips/sni/time.c
+++ b/arch/mips/sni/time.c
@@ -18,14 +18,14 @@ static int a20r_set_periodic(struct clock_event_device *evt)
{
*(volatile u8 *)(A20R_PT_CLOCK_BASE + 12) = 0x34;
wmb();
- *(volatile u8 *)(A20R_PT_CLOCK_BASE + 0) = SNI_COUNTER0_DIV;
+ *(volatile u8 *)(A20R_PT_CLOCK_BASE + 0) = SNI_COUNTER0_DIV & 0xff;
wmb();
*(volatile u8 *)(A20R_PT_CLOCK_BASE + 0) = SNI_COUNTER0_DIV >> 8;
wmb();
*(volatile u8 *)(A20R_PT_CLOCK_BASE + 12) = 0xb4;
wmb();
- *(volatile u8 *)(A20R_PT_CLOCK_BASE + 8) = SNI_COUNTER2_DIV;
+ *(volatile u8 *)(A20R_PT_CLOCK_BASE + 8) = SNI_COUNTER2_DIV & 0xff;
wmb();
*(volatile u8 *)(A20R_PT_CLOCK_BASE + 8) = SNI_COUNTER2_DIV >> 8;
wmb();
--
2.33.0
From: Randy Dunlap <[email protected]>
[ Upstream commit b929926f01f2d14635345d22eafcf60feed1085e ]
Fix this by defining both ENDIAN macros in
<asm/sfp-machine.h> so that they can be utilized in
<math-emu/soft-fp.h> according to the latter's comment:
/* Allow sfp-machine to have its own byte order definitions. */
(This is what is done in arch/nds32/include/asm/sfp-machine.h.)
This placates these build warnings:
In file included from ../arch/sh/math-emu/math.c:23:
.../include/math-emu/single.h:50:21: warning: "__BIG_ENDIAN" is not defined, evaluates to 0 [-Wundef]
50 | #if __BYTE_ORDER == __BIG_ENDIAN
In file included from ../arch/sh/math-emu/math.c:24:
.../include/math-emu/double.h:59:21: warning: "__BIG_ENDIAN" is not defined, evaluates to 0 [-Wundef]
59 | #if __BYTE_ORDER == __BIG_ENDIAN
Fixes: 4b565680d163 ("sh: math-emu support")
Signed-off-by: Randy Dunlap <[email protected]>
Cc: Yoshinori Sato <[email protected]>
Cc: John Paul Adrian Glaubitz <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Tested-by: John Paul Adrian Glaubitz <[email protected]>
Signed-off-by: Rich Felker <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/sh/include/asm/sfp-machine.h | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/sh/include/asm/sfp-machine.h b/arch/sh/include/asm/sfp-machine.h
index d3c548443f2a6..dd195c6f3b9d8 100644
--- a/arch/sh/include/asm/sfp-machine.h
+++ b/arch/sh/include/asm/sfp-machine.h
@@ -25,6 +25,14 @@
#ifndef _SFP_MACHINE_H
#define _SFP_MACHINE_H
+#ifdef __BIG_ENDIAN__
+#define __BYTE_ORDER __BIG_ENDIAN
+#define __LITTLE_ENDIAN 0
+#else
+#define __BYTE_ORDER __LITTLE_ENDIAN
+#define __BIG_ENDIAN 0
+#endif
+
#define _FP_W_TYPE_SIZE 32
#define _FP_W_TYPE unsigned long
#define _FP_WS_TYPE signed long
--
2.33.0
From: Randy Dunlap <[email protected]>
[ Upstream commit fc1aabb088860d6cf9dd03612b7a6f0de91ccac2 ]
Provide a simple implementation of clk_get_parent() in the
lantiq subarch so that callers of it will build without errors.
Fixes this build error:
ERROR: modpost: "clk_get_parent" [drivers/iio/adc/ingenic-adc.ko] undefined!
Fixes: 171bb2f19ed6 ("MIPS: Lantiq: Add initial support for Lantiq SoCs")
Signed-off-by: Randy Dunlap <[email protected]>
Suggested-by: Russell King (Oracle) <[email protected]>
Cc: [email protected]
Cc: John Crispin <[email protected]>
Cc: Thomas Bogendoerfer <[email protected]>
Cc: Jonathan Cameron <[email protected]>
Cc: [email protected]
Cc: Russell King <[email protected]>
Cc: Andy Shevchenko <[email protected]>
Acked-by: Jonathan Cameron <[email protected]>
Acked-by: John Crispin <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/mips/lantiq/clk.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/mips/lantiq/clk.c b/arch/mips/lantiq/clk.c
index a263d1b751ffe..a8e309dcd38d7 100644
--- a/arch/mips/lantiq/clk.c
+++ b/arch/mips/lantiq/clk.c
@@ -160,6 +160,12 @@ void clk_deactivate(struct clk *clk)
}
EXPORT_SYMBOL(clk_deactivate);
+struct clk *clk_get_parent(struct clk *clk)
+{
+ return NULL;
+}
+EXPORT_SYMBOL(clk_get_parent);
+
static inline u32 get_counter_resolution(void)
{
u32 res;
--
2.33.0
From: Randy Dunlap <[email protected]>
[ Upstream commit e8f67482e5a4bc8d0b65d606d08cb60ee123b468 ]
BCM63XX selects HAVE_LEGACY_CLK but does not provide/support
clk_get_parent(), so add a simple implementation of that
function so that callers of it will build without errors.
Fixes these build errors:
mips-linux-ld: drivers/iio/adc/ingenic-adc.o: in function `jz4770_adc_init_clk_div':
ingenic-adc.c:(.text+0xe4): undefined reference to `clk_get_parent'
mips-linux-ld: drivers/iio/adc/ingenic-adc.o: in function `jz4725b_adc_init_clk_div':
ingenic-adc.c:(.text+0x1b8): undefined reference to `clk_get_parent'
Fixes: e7300d04bd08 ("MIPS: BCM63xx: Add support for the Broadcom BCM63xx family of SOCs." )
Signed-off-by: Randy Dunlap <[email protected]>
Reported-by: kernel test robot <[email protected]>
Suggested-by: Russell King (Oracle) <[email protected]>
Cc: Artur Rojek <[email protected]>
Cc: Paul Cercueil <[email protected]>
Cc: [email protected]
Cc: Jonathan Cameron <[email protected]>
Cc: Lars-Peter Clausen <[email protected]>
Cc: [email protected]
Cc: Florian Fainelli <[email protected]>
Cc: Andy Shevchenko <[email protected]>
Cc: Russell King <[email protected]>
Cc: [email protected]
Cc: Jonas Gorski <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Acked-by: Jonathan Cameron <[email protected]>
Acked-by: Russell King (Oracle) <[email protected]>
Acked-by: Florian Fainelli <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/mips/bcm63xx/clk.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/mips/bcm63xx/clk.c b/arch/mips/bcm63xx/clk.c
index 19577f771c1f0..d2a5054b0492b 100644
--- a/arch/mips/bcm63xx/clk.c
+++ b/arch/mips/bcm63xx/clk.c
@@ -337,6 +337,12 @@ void clk_disable(struct clk *clk)
EXPORT_SYMBOL(clk_disable);
+struct clk *clk_get_parent(struct clk *clk)
+{
+ return NULL;
+}
+EXPORT_SYMBOL(clk_get_parent);
+
unsigned long clk_get_rate(struct clk *clk)
{
if (!clk)
--
2.33.0
From: Jonathan Davies <[email protected]>
[ Upstream commit cf9acc90c80ecbee00334aa85d92f4e74014bcff ]
virtio_net_hdr_to_skb does not set the skb's gso_size and gso_type
correctly for UFO packets received via virtio-net that are a little over
the GSO size. This can lead to problems elsewhere in the networking
stack, e.g. ovs_vport_send dropping over-sized packets if gso_size is
not set.
This is due to the comparison
if (skb->len - p_off > gso_size)
not properly accounting for the transport layer header.
p_off includes the size of the transport layer header (thlen), so
skb->len - p_off is the size of the TCP/UDP payload.
gso_size is read from the virtio-net header. For UFO, fragmentation
happens at the IP level so does not need to include the UDP header.
Hence the calculation could be comparing a TCP/UDP payload length with
an IP payload length, causing legitimate virtio-net packets to have
lack gso_type/gso_size information.
Example: a UDP packet with payload size 1473 has IP payload size 1481.
If the guest used UFO, it is not fragmented and the virtio-net header's
flags indicate that it is a GSO frame (VIRTIO_NET_HDR_GSO_UDP), with
gso_size = 1480 for an MTU of 1500. skb->len will be 1515 and p_off
will be 42, so skb->len - p_off = 1473. Hence the comparison fails, and
shinfo->gso_size and gso_type are not set as they should be.
Instead, add the UDP header length before comparing to gso_size when
using UFO. In this way, it is the size of the IP payload that is
compared to gso_size.
Fixes: 6dd912f82680 ("net: check untrusted gso_size at kernel entry")
Signed-off-by: Jonathan Davies <[email protected]>
Reviewed-by: Willem de Bruijn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/linux/virtio_net.h | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/include/linux/virtio_net.h b/include/linux/virtio_net.h
index ca68826d84495..162761f72c142 100644
--- a/include/linux/virtio_net.h
+++ b/include/linux/virtio_net.h
@@ -118,10 +118,15 @@ retry:
if (hdr->gso_type != VIRTIO_NET_HDR_GSO_NONE) {
u16 gso_size = __virtio16_to_cpu(little_endian, hdr->gso_size);
+ unsigned int nh_off = p_off;
struct skb_shared_info *shinfo = skb_shinfo(skb);
+ /* UFO may not include transport header in gso_size. */
+ if (gso_type & SKB_GSO_UDP)
+ nh_off -= thlen;
+
/* Too small packets are not really GSO ones. */
- if (skb->len - p_off > gso_size) {
+ if (skb->len - nh_off > gso_size) {
shinfo->gso_size = gso_size;
shinfo->gso_type = gso_type;
--
2.33.0
From: Christophe JAILLET <[email protected]>
[ Upstream commit c961a7d2aa23ae19e0099fbcdf1040fb760eea83 ]
If 'led_classdev_register()' fails, some additional resources should be
released.
Add the missing 'i8042_remove_filter()' and 'lis3lv02d_remove_fs()' calls
that are already in the remove function but are missing here.
Fixes: a4c724d0723b ("platform: hp_accel: add a i8042 filter to remove HPQ6000 data from kb bus stream")
Fixes: 9e0c79782143 ("lis3lv02d: merge with leds hp disk")
Signed-off-by: Christophe JAILLET <[email protected]>
Link: https://lore.kernel.org/r/5a4f218f8f16d2e3a7906b7ca3654ffa946895f8.1636314074.git.christophe.jaillet@wanadoo.fr
Reviewed-by: Hans de Goede <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/platform/x86/hp_accel.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/platform/x86/hp_accel.c b/drivers/platform/x86/hp_accel.c
index 9c3c83ef445bf..075332c6890d0 100644
--- a/drivers/platform/x86/hp_accel.c
+++ b/drivers/platform/x86/hp_accel.c
@@ -383,9 +383,11 @@ static int lis3lv02d_add(struct acpi_device *device)
INIT_WORK(&hpled_led.work, delayed_set_status_worker);
ret = led_classdev_register(NULL, &hpled_led.led_classdev);
if (ret) {
+ i8042_remove_filter(hp_accel_i8042_filter);
lis3lv02d_joystick_disable(&lis3_dev);
lis3lv02d_poweroff(&lis3_dev);
flush_work(&hpled_led.work);
+ lis3lv02d_remove_fs(&lis3_dev);
return ret;
}
--
2.33.0
From: Mike Christie <[email protected]>
[ Upstream commit ed1227e080990ffec5bf39006ec8a57358e6689a ]
This patch fixes the following bugs:
1. If there are multiple ordered cmds queued and multiple simple cmds
completing, target_restart_delayed_cmds() could be called on different
CPUs and each instance could start a ordered cmd. They could then run in
different orders than they were queued.
2. target_restart_delayed_cmds() and target_handle_task_attr() can race
where:
1. target_handle_task_attr() has passed the simple_cmds == 0 check.
2. transport_complete_task_attr() then decrements simple_cmds to 0.
3. transport_complete_task_attr() runs target_restart_delayed_cmds() and
it does not see any cmds on the delayed_cmd_list.
4. target_handle_task_attr() adds the cmd to the delayed_cmd_list.
The cmd will then end up timing out.
3. If we are sent > 1 ordered cmds and simple_cmds == 0, we can execute
them out of order, because target_handle_task_attr() will hit that
simple_cmds check first and return false for all ordered cmds sent.
4. We run target_restart_delayed_cmds() after every cmd completion, so if
there is more than 1 simple cmd running, we start executing ordered cmds
after that first cmd instead of waiting for all of them to complete.
5. Ordered cmds are not supposed to start until HEAD OF QUEUE and all older
cmds have completed, and not just simple.
6. It's not a bug but it doesn't make sense to take the delayed_cmd_lock
for every cmd completion when ordered cmds are almost never used. Just
replacing that lock with an atomic increases IOPs by up to 10% when
completions are spread over multiple CPUs and there are multiple
sessions/ mqs/thread accessing the same device.
This patch moves the queued delayed handling to a per device work to
serialze the cmd executions for each device and adds a new counter to track
HEAD_OF_QUEUE and SIMPLE cmds. We can then check the new counter to
determine when to run the work on the completion path.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mike Christie <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/target/target_core_device.c | 2 +
drivers/target/target_core_internal.h | 1 +
drivers/target/target_core_transport.c | 76 ++++++++++++++++++--------
include/target/target_core_base.h | 6 +-
4 files changed, 61 insertions(+), 24 deletions(-)
diff --git a/drivers/target/target_core_device.c b/drivers/target/target_core_device.c
index cebef8e5a43d1..68b2fa562201c 100644
--- a/drivers/target/target_core_device.c
+++ b/drivers/target/target_core_device.c
@@ -791,6 +791,8 @@ struct se_device *target_alloc_device(struct se_hba *hba, const char *name)
INIT_LIST_HEAD(&dev->t10_alua.lba_map_list);
spin_lock_init(&dev->t10_alua.lba_map_lock);
+ INIT_WORK(&dev->delayed_cmd_work, target_do_delayed_work);
+
dev->t10_wwn.t10_dev = dev;
dev->t10_alua.t10_dev = dev;
diff --git a/drivers/target/target_core_internal.h b/drivers/target/target_core_internal.h
index 18e3eb16e7567..7060be69dc6a3 100644
--- a/drivers/target/target_core_internal.h
+++ b/drivers/target/target_core_internal.h
@@ -149,6 +149,7 @@ void transport_clear_lun_ref(struct se_lun *);
void transport_send_task_abort(struct se_cmd *);
sense_reason_t target_cmd_size_check(struct se_cmd *cmd, unsigned int size);
void target_qf_do_work(struct work_struct *work);
+void target_do_delayed_work(struct work_struct *work);
bool target_check_wce(struct se_device *dev);
bool target_check_fua(struct se_device *dev);
void __target_execute_cmd(struct se_cmd *, bool);
diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c
index 852680e859217..c20997bf314e9 100644
--- a/drivers/target/target_core_transport.c
+++ b/drivers/target/target_core_transport.c
@@ -1914,32 +1914,35 @@ static bool target_handle_task_attr(struct se_cmd *cmd)
*/
switch (cmd->sam_task_attr) {
case TCM_HEAD_TAG:
+ atomic_inc_mb(&dev->non_ordered);
pr_debug("Added HEAD_OF_QUEUE for CDB: 0x%02x\n",
cmd->t_task_cdb[0]);
return false;
case TCM_ORDERED_TAG:
- atomic_inc_mb(&dev->dev_ordered_sync);
+ atomic_inc_mb(&dev->delayed_cmd_count);
pr_debug("Added ORDERED for CDB: 0x%02x to ordered list\n",
cmd->t_task_cdb[0]);
-
- /*
- * Execute an ORDERED command if no other older commands
- * exist that need to be completed first.
- */
- if (!atomic_read(&dev->simple_cmds))
- return false;
break;
default:
/*
* For SIMPLE and UNTAGGED Task Attribute commands
*/
- atomic_inc_mb(&dev->simple_cmds);
+ atomic_inc_mb(&dev->non_ordered);
+
+ if (atomic_read(&dev->delayed_cmd_count) == 0)
+ return false;
break;
}
- if (atomic_read(&dev->dev_ordered_sync) == 0)
- return false;
+ if (cmd->sam_task_attr != TCM_ORDERED_TAG) {
+ atomic_inc_mb(&dev->delayed_cmd_count);
+ /*
+ * We will account for this when we dequeue from the delayed
+ * list.
+ */
+ atomic_dec_mb(&dev->non_ordered);
+ }
spin_lock(&dev->delayed_cmd_lock);
list_add_tail(&cmd->se_delayed_node, &dev->delayed_cmd_list);
@@ -1947,6 +1950,12 @@ static bool target_handle_task_attr(struct se_cmd *cmd)
pr_debug("Added CDB: 0x%02x Task Attr: 0x%02x to delayed CMD listn",
cmd->t_task_cdb[0], cmd->sam_task_attr);
+ /*
+ * We may have no non ordered cmds when this function started or we
+ * could have raced with the last simple/head cmd completing, so kick
+ * the delayed handler here.
+ */
+ schedule_work(&dev->delayed_cmd_work);
return true;
}
@@ -1997,29 +2006,48 @@ EXPORT_SYMBOL(target_execute_cmd);
* Process all commands up to the last received ORDERED task attribute which
* requires another blocking boundary
*/
-static void target_restart_delayed_cmds(struct se_device *dev)
+void target_do_delayed_work(struct work_struct *work)
{
- for (;;) {
+ struct se_device *dev = container_of(work, struct se_device,
+ delayed_cmd_work);
+
+ spin_lock(&dev->delayed_cmd_lock);
+ while (!dev->ordered_sync_in_progress) {
struct se_cmd *cmd;
- spin_lock(&dev->delayed_cmd_lock);
- if (list_empty(&dev->delayed_cmd_list)) {
- spin_unlock(&dev->delayed_cmd_lock);
+ if (list_empty(&dev->delayed_cmd_list))
break;
- }
cmd = list_entry(dev->delayed_cmd_list.next,
struct se_cmd, se_delayed_node);
+
+ if (cmd->sam_task_attr == TCM_ORDERED_TAG) {
+ /*
+ * Check if we started with:
+ * [ordered] [simple] [ordered]
+ * and we are now at the last ordered so we have to wait
+ * for the simple cmd.
+ */
+ if (atomic_read(&dev->non_ordered) > 0)
+ break;
+
+ dev->ordered_sync_in_progress = true;
+ }
+
list_del(&cmd->se_delayed_node);
+ atomic_dec_mb(&dev->delayed_cmd_count);
spin_unlock(&dev->delayed_cmd_lock);
+ if (cmd->sam_task_attr != TCM_ORDERED_TAG)
+ atomic_inc_mb(&dev->non_ordered);
+
cmd->transport_state |= CMD_T_SENT;
__target_execute_cmd(cmd, true);
- if (cmd->sam_task_attr == TCM_ORDERED_TAG)
- break;
+ spin_lock(&dev->delayed_cmd_lock);
}
+ spin_unlock(&dev->delayed_cmd_lock);
}
/*
@@ -2037,14 +2065,17 @@ static void transport_complete_task_attr(struct se_cmd *cmd)
goto restart;
if (cmd->sam_task_attr == TCM_SIMPLE_TAG) {
- atomic_dec_mb(&dev->simple_cmds);
+ atomic_dec_mb(&dev->non_ordered);
dev->dev_cur_ordered_id++;
} else if (cmd->sam_task_attr == TCM_HEAD_TAG) {
+ atomic_dec_mb(&dev->non_ordered);
dev->dev_cur_ordered_id++;
pr_debug("Incremented dev_cur_ordered_id: %u for HEAD_OF_QUEUE\n",
dev->dev_cur_ordered_id);
} else if (cmd->sam_task_attr == TCM_ORDERED_TAG) {
- atomic_dec_mb(&dev->dev_ordered_sync);
+ spin_lock(&dev->delayed_cmd_lock);
+ dev->ordered_sync_in_progress = false;
+ spin_unlock(&dev->delayed_cmd_lock);
dev->dev_cur_ordered_id++;
pr_debug("Incremented dev_cur_ordered_id: %u for ORDERED\n",
@@ -2053,7 +2084,8 @@ static void transport_complete_task_attr(struct se_cmd *cmd)
cmd->se_cmd_flags &= ~SCF_TASK_ATTR_SET;
restart:
- target_restart_delayed_cmds(dev);
+ if (atomic_read(&dev->delayed_cmd_count) > 0)
+ schedule_work(&dev->delayed_cmd_work);
}
static void transport_complete_qf(struct se_cmd *cmd)
diff --git a/include/target/target_core_base.h b/include/target/target_core_base.h
index 0d924e968c94b..336c9f71b750a 100644
--- a/include/target/target_core_base.h
+++ b/include/target/target_core_base.h
@@ -771,8 +771,9 @@ struct se_device {
atomic_long_t read_bytes;
atomic_long_t write_bytes;
/* Active commands on this virtual SE device */
- atomic_t simple_cmds;
- atomic_t dev_ordered_sync;
+ atomic_t non_ordered;
+ bool ordered_sync_in_progress;
+ atomic_t delayed_cmd_count;
atomic_t dev_qf_count;
u32 export_count;
spinlock_t delayed_cmd_lock;
@@ -795,6 +796,7 @@ struct se_device {
struct list_head dev_tmr_list;
struct workqueue_struct *tmr_wq;
struct work_struct qf_work_queue;
+ struct work_struct delayed_cmd_work;
struct list_head delayed_cmd_list;
struct list_head state_list;
struct list_head qf_cmd_list;
--
2.33.0
From: Lin Ma <[email protected]>
[ Upstream commit 86cdf8e38792545161dbe3350a7eced558ba4d15 ]
There is a possible data race as shown below:
thread-A in nci_request() | thread-B in nci_close_device()
| mutex_lock(&ndev->req_lock);
test_bit(NCI_UP, &ndev->flags); |
... | test_and_clear_bit(NCI_UP, &ndev->flags)
mutex_lock(&ndev->req_lock); |
|
This race will allow __nci_request() to be awaked while the device is
getting removed.
Similar to commit e2cb6b891ad2 ("bluetooth: eliminate the potential race
condition when removing the HCI controller"). this patch alters the
function sequence in nci_request() to prevent the data races between the
nci_close_device().
Signed-off-by: Lin Ma <[email protected]>
Fixes: 6a2968aaf50c ("NFC: basic NCI protocol implementation")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/nfc/nci/core.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
diff --git a/net/nfc/nci/core.c b/net/nfc/nci/core.c
index d3b7419f8b8f0..c73651faa5494 100644
--- a/net/nfc/nci/core.c
+++ b/net/nfc/nci/core.c
@@ -156,12 +156,15 @@ inline int nci_request(struct nci_dev *ndev,
{
int rc;
- if (!test_bit(NCI_UP, &ndev->flags))
- return -ENETDOWN;
-
/* Serialize all requests */
mutex_lock(&ndev->req_lock);
- rc = __nci_request(ndev, req, opt, timeout);
+ /* check the state after obtaing the lock against any races
+ * from nci_close_device when the device gets removed.
+ */
+ if (test_bit(NCI_UP, &ndev->flags))
+ rc = __nci_request(ndev, req, opt, timeout);
+ else
+ rc = -ENETDOWN;
mutex_unlock(&ndev->req_lock);
return rc;
--
2.33.0
From: Lin Ma <[email protected]>
[ Upstream commit 3e3b5dfcd16a3e254aab61bd1e8c417dd4503102 ]
There is a potential UAF between the unregistration routine and the NFC
netlink operations.
The race that cause that UAF can be shown as below:
(FREE) | (USE)
nfcmrvl_nci_unregister_dev | nfc_genl_dev_up
nci_close_device |
nci_unregister_device | nfc_get_device
nfc_unregister_device | nfc_dev_up
rfkill_destory |
device_del | rfkill_blocked
... | ...
The root cause for this race is concluded below:
1. The rfkill_blocked (USE) in nfc_dev_up is supposed to be placed after
the device_is_registered check.
2. Since the netlink operations are possible just after the device_add
in nfc_register_device, the nfc_dev_up() can happen anywhere during the
rfkill creation process, which leads to data race.
This patch reorder these actions to permit
1. Once device_del is finished, the nfc_dev_up cannot dereference the
rfkill object.
2. The rfkill_register need to be placed after the device_add of nfc_dev
because the parent device need to be created first. So this patch keeps
the order but inject device_lock to prevent the data race.
Signed-off-by: Lin Ma <[email protected]>
Fixes: be055b2f89b5 ("NFC: RFKILL support")
Reviewed-by: Jakub Kicinski <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/nfc/core.c | 32 ++++++++++++++++++--------------
1 file changed, 18 insertions(+), 14 deletions(-)
diff --git a/net/nfc/core.c b/net/nfc/core.c
index c699d64a0753a..32a2dfc08f480 100644
--- a/net/nfc/core.c
+++ b/net/nfc/core.c
@@ -106,13 +106,13 @@ int nfc_dev_up(struct nfc_dev *dev)
device_lock(&dev->dev);
- if (dev->rfkill && rfkill_blocked(dev->rfkill)) {
- rc = -ERFKILL;
+ if (!device_is_registered(&dev->dev)) {
+ rc = -ENODEV;
goto error;
}
- if (!device_is_registered(&dev->dev)) {
- rc = -ENODEV;
+ if (dev->rfkill && rfkill_blocked(dev->rfkill)) {
+ rc = -ERFKILL;
goto error;
}
@@ -1133,11 +1133,7 @@ int nfc_register_device(struct nfc_dev *dev)
if (rc)
pr_err("Could not register llcp device\n");
- rc = nfc_genl_device_added(dev);
- if (rc)
- pr_debug("The userspace won't be notified that the device %s was added\n",
- dev_name(&dev->dev));
-
+ device_lock(&dev->dev);
dev->rfkill = rfkill_alloc(dev_name(&dev->dev), &dev->dev,
RFKILL_TYPE_NFC, &nfc_rfkill_ops, dev);
if (dev->rfkill) {
@@ -1146,6 +1142,12 @@ int nfc_register_device(struct nfc_dev *dev)
dev->rfkill = NULL;
}
}
+ device_unlock(&dev->dev);
+
+ rc = nfc_genl_device_added(dev);
+ if (rc)
+ pr_debug("The userspace won't be notified that the device %s was added\n",
+ dev_name(&dev->dev));
return 0;
}
@@ -1162,10 +1164,17 @@ void nfc_unregister_device(struct nfc_dev *dev)
pr_debug("dev_name=%s\n", dev_name(&dev->dev));
+ rc = nfc_genl_device_removed(dev);
+ if (rc)
+ pr_debug("The userspace won't be notified that the device %s "
+ "was removed\n", dev_name(&dev->dev));
+
+ device_lock(&dev->dev);
if (dev->rfkill) {
rfkill_unregister(dev->rfkill);
rfkill_destroy(dev->rfkill);
}
+ device_unlock(&dev->dev);
if (dev->ops->check_presence) {
device_lock(&dev->dev);
@@ -1175,11 +1184,6 @@ void nfc_unregister_device(struct nfc_dev *dev)
cancel_work_sync(&dev->check_pres_work);
}
- rc = nfc_genl_device_removed(dev);
- if (rc)
- pr_debug("The userspace won't be notified that the device %s "
- "was removed\n", dev_name(&dev->dev));
-
nfc_llcp_unregister_device(dev);
mutex_lock(&nfc_devlist_mutex);
--
2.33.0
From: Sohaib Mohamed <[email protected]>
[ Upstream commit 92723ea0f11d92496687db8c9725248e9d1e5e1d ]
ASan reports memory leaks while running:
$ perf bench sched all
Fixes: e27454cc6352c422 ("perf bench: Add sched-messaging.c: Benchmark for scheduler and IPC mechanisms based on hackbench")
Signed-off-by: Sohaib Mohamed <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Hitoshi Mitake <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Russel <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Pierre Gondois <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/perf/bench/sched-messaging.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/tools/perf/bench/sched-messaging.c b/tools/perf/bench/sched-messaging.c
index f9d7641ae8338..b4e13db991e9e 100644
--- a/tools/perf/bench/sched-messaging.c
+++ b/tools/perf/bench/sched-messaging.c
@@ -226,6 +226,8 @@ static unsigned int group(pthread_t *pth,
snd_ctx->out_fds[i] = fds[1];
if (!thread_mode)
close(fds[0]);
+
+ free(ctx);
}
/* Now we have all the fds, fork the senders */
@@ -242,6 +244,8 @@ static unsigned int group(pthread_t *pth,
for (i = 0; i < num_fds; i++)
close(snd_ctx->out_fds[i]);
+ free(snd_ctx);
+
/* Return number of children to reap */
return num_fds * 2;
}
--
2.33.0
From: Surabhi Boob <[email protected]>
[ Upstream commit 321421b57a12e933f92b228e0e6d0b2c6541f41d ]
While issuing VF Reset from the guest OS, the VF driver prints
logs about critical / Overflow error detection. This is not an
actual error since the VF_MBX_ARQLEN register is set to all FF's
for a short period of time and the VF would catch the bits set if
it was reading the register during that spike of time.
This patch introduces an additional check to ignore this condition
since the VF is in reset.
Fixes: 19b73d8efaa4 ("i40evf: Add additional check for reset")
Signed-off-by: Surabhi Boob <[email protected]>
Tested-by: Tony Brelinski <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/i40evf/i40evf_main.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_main.c b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
index ad2dd5b747b23..6bc772401cff2 100644
--- a/drivers/net/ethernet/intel/i40evf/i40evf_main.c
+++ b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
@@ -2027,7 +2027,7 @@ static void i40evf_adminq_task(struct work_struct *work)
/* check for error indications */
val = rd32(hw, hw->aq.arq.len);
- if (val == 0xdeadbeef) /* indicates device in reset */
+ if (val == 0xdeadbeef || val == 0xffffffff) /* device in reset */
goto freedom;
oldval = val;
if (val & I40E_VF_ARQLEN1_ARQVFE_MASK) {
--
2.33.0
From: Pavel Skripkin <[email protected]>
[ Upstream commit f8885ac89ce310570e5391fe0bf0ec9c7c9b4fdc ]
Smatch says:
bnx2x_init_ops.h:640 bnx2x_ilt_client_mem_op()
warn: variable dereferenced before check 'ilt' (see line 638)
Move ilt_cli variable initialization _after_ ilt validation, because
it's unsafe to deref the pointer before validation check.
Fixes: 523224a3b3cd ("bnx2x, cnic, bnx2i: use new FW/HSI")
Signed-off-by: Pavel Skripkin <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/broadcom/bnx2x/bnx2x_init_ops.h | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init_ops.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init_ops.h
index 1835d2e451c01..fc7fce642666c 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init_ops.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init_ops.h
@@ -635,11 +635,13 @@ static int bnx2x_ilt_client_mem_op(struct bnx2x *bp, int cli_num,
{
int i, rc;
struct bnx2x_ilt *ilt = BP_ILT(bp);
- struct ilt_client_info *ilt_cli = &ilt->clients[cli_num];
+ struct ilt_client_info *ilt_cli;
if (!ilt || !ilt->lines)
return -1;
+ ilt_cli = &ilt->clients[cli_num];
+
if (ilt_cli->flags & (ILT_CLIENT_SKIP_INIT | ILT_CLIENT_SKIP_MEM))
return 0;
--
2.33.0
From: Vincent Donnefort <[email protected]>
[ Upstream commit 42dc938a590c96eeb429e1830123fef2366d9c80 ]
Nothing protects the access to the per_cpu variable sd_llc_id. When testing
the same CPU (i.e. this_cpu == that_cpu), a race condition exists with
update_top_cache_domain(). One scenario being:
CPU1 CPU2
==================================================================
per_cpu(sd_llc_id, CPUX) => 0
partition_sched_domains_locked()
detach_destroy_domains()
cpus_share_cache(CPUX, CPUX) update_top_cache_domain(CPUX)
per_cpu(sd_llc_id, CPUX) => 0
per_cpu(sd_llc_id, CPUX) = CPUX
per_cpu(sd_llc_id, CPUX) => CPUX
return false
ttwu_queue_cond() wouldn't catch smp_processor_id() == cpu and the result
is a warning triggered from ttwu_queue_wakelist().
Avoid a such race in cpus_share_cache() by always returning true when
this_cpu == that_cpu.
Fixes: 518cd6234178 ("sched: Only queue remote wakeups when crossing cache boundaries")
Reported-by: Jing-Ting Wu <[email protected]>
Signed-off-by: Vincent Donnefort <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Valentin Schneider <[email protected]>
Reviewed-by: Vincent Guittot <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/sched/core.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index 7cedada731c1b..544a1cb66d90d 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -1852,6 +1852,9 @@ out:
bool cpus_share_cache(int this_cpu, int that_cpu)
{
+ if (this_cpu == that_cpu)
+ return true;
+
return per_cpu(sd_llc_id, this_cpu) == per_cpu(sd_llc_id, that_cpu);
}
#endif /* CONFIG_SMP */
--
2.33.0
From: Randy Dunlap <[email protected]>
[ Upstream commit 5eeaafc8d69373c095e461bdb39e5c9b62228ac5 ]
Several header files need info on CONFIG_32BIT or CONFIG_64BIT,
but kconfig symbol BCM63XX does not provide that info. This leads
to many build errors, e.g.:
arch/mips/include/asm/page.h:196:13: error: use of undeclared identifier 'CAC_BASE'
return x - PAGE_OFFSET + PHYS_OFFSET;
arch/mips/include/asm/mach-generic/spaces.h:91:23: note: expanded from macro 'PAGE_OFFSET'
#define PAGE_OFFSET (CAC_BASE + PHYS_OFFSET)
arch/mips/include/asm/io.h:134:28: error: use of undeclared identifier 'CAC_BASE'
return (void *)(address + PAGE_OFFSET - PHYS_OFFSET);
arch/mips/include/asm/mach-generic/spaces.h:91:23: note: expanded from macro 'PAGE_OFFSET'
#define PAGE_OFFSET (CAC_BASE + PHYS_OFFSET)
arch/mips/include/asm/uaccess.h:82:10: error: use of undeclared identifier '__UA_LIMIT'
return (__UA_LIMIT & (addr | (addr + size) | __ua_size(size))) == 0;
Selecting the SYS_HAS_CPU_BMIPS* symbols causes SYS_HAS_CPU_BMIPS to be
set, which then selects CPU_SUPPORT_32BIT_KERNEL, which causes
CONFIG_32BIT to be set. (a bit more indirect than v1 [RFC].)
Fixes: e7300d04bd08 ("MIPS: BCM63xx: Add support for the Broadcom BCM63xx family of SOCs.")
Signed-off-by: Randy Dunlap <[email protected]>
Reported-by: kernel test robot <[email protected]>
Cc: Thomas Bogendoerfer <[email protected]>
Cc: Florian Fainelli <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: Paul Burton <[email protected]>
Cc: Maxime Bizon <[email protected]>
Cc: Ralf Baechle <[email protected]>
Suggested-by: Florian Fainelli <[email protected]>
Acked-by: Florian Fainelli <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/mips/Kconfig | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 8e77149d658fc..85afd6b4297b2 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -273,6 +273,9 @@ config BCM63XX
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_HAS_EARLY_PRINTK
+ select SYS_HAS_CPU_BMIPS32_3300
+ select SYS_HAS_CPU_BMIPS4350
+ select SYS_HAS_CPU_BMIPS4380
select SWAP_IO_SPACE
select GPIOLIB
select HAVE_CLK
--
2.33.0
From: Colin Ian King <[email protected]>
[ Upstream commit 255e51da15baed47531beefd02f222e4dc01f1c1 ]
In the case where fw_getenv returns an error when fetching values
for ememsizea and memsize then variable phys_memsize is not assigned
a variable and will be uninitialized on a zero check of phys_memsize.
Fix this by initializing phys_memsize to zero.
Cleans up cppcheck error:
arch/mips/generic/yamon-dt.c:100:7: error: Uninitialized variable: phys_memsize [uninitvar]
Fixes: f41d2430bbd6 ("MIPS: generic/yamon-dt: Support > 256MB of RAM")
Signed-off-by: Colin Ian King <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/mips/generic/yamon-dt.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/mips/generic/yamon-dt.c b/arch/mips/generic/yamon-dt.c
index b408dac722ac7..e5fcaafea3a42 100644
--- a/arch/mips/generic/yamon-dt.c
+++ b/arch/mips/generic/yamon-dt.c
@@ -81,7 +81,7 @@ static unsigned int __init gen_fdt_mem_array(
__init int yamon_dt_append_memory(void *fdt,
const struct yamon_mem_region *regions)
{
- unsigned long phys_memsize, memsize;
+ unsigned long phys_memsize = 0, memsize;
__be32 mem_array[2 * MAX_MEM_ARRAY_ENTRIES];
unsigned int mem_entries;
int i, err, mem_off;
--
2.33.0
From: Michal Maloszewski <[email protected]>
[ Upstream commit 37d9e304acd903a445df8208b8a13d707902dea6 ]
Remove the reason of null pointer dereference in sync VSI filters.
Added new I40E_VSI_RELEASING flag to signalize deleting and releasing
of VSI resources to sync this thread with sync filters subtask.
Without this patch it is possible to start update the VSI filter list
after VSI is removed, that's causing a kernel oops.
Fixes: 41c445ff0f48 ("i40e: main driver core")
Signed-off-by: Grzegorz Szczurek <[email protected]>
Signed-off-by: Michal Maloszewski <[email protected]>
Reviewed-by: Przemyslaw Patynowski <[email protected]>
Reviewed-by: Witold Fijalkowski <[email protected]>
Reviewed-by: Jaroslaw Gawin <[email protected]>
Reviewed-by: Aleksandr Loktionov <[email protected]>
Tested-by: Tony Brelinski <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/i40e/i40e.h | 1 +
drivers/net/ethernet/intel/i40e/i40e_main.c | 5 +++--
2 files changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/intel/i40e/i40e.h b/drivers/net/ethernet/intel/i40e/i40e.h
index d0c1bf5441d84..438e2675bc132 100644
--- a/drivers/net/ethernet/intel/i40e/i40e.h
+++ b/drivers/net/ethernet/intel/i40e/i40e.h
@@ -163,6 +163,7 @@ enum i40e_vsi_state_t {
__I40E_VSI_OVERFLOW_PROMISC,
__I40E_VSI_REINIT_REQUESTED,
__I40E_VSI_DOWN_REQUESTED,
+ __I40E_VSI_RELEASING,
/* This must be last as it determines the size of the BITMAP */
__I40E_VSI_STATE_SIZE__,
};
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 1555d32ddb962..44a9c8aa3067a 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -2415,7 +2415,8 @@ static void i40e_sync_filters_subtask(struct i40e_pf *pf)
for (v = 0; v < pf->num_alloc_vsi; v++) {
if (pf->vsi[v] &&
- (pf->vsi[v]->flags & I40E_VSI_FLAG_FILTER_CHANGED)) {
+ (pf->vsi[v]->flags & I40E_VSI_FLAG_FILTER_CHANGED) &&
+ !test_bit(__I40E_VSI_RELEASING, pf->vsi[v]->state)) {
int ret = i40e_sync_vsi_filters(pf->vsi[v]);
if (ret) {
@@ -10098,7 +10099,7 @@ int i40e_vsi_release(struct i40e_vsi *vsi)
dev_info(&pf->pdev->dev, "Can't remove PF VSI\n");
return -ENODEV;
}
-
+ set_bit(__I40E_VSI_RELEASING, vsi->state);
uplink_seid = vsi->uplink_seid;
if (vsi->type != I40E_VSI_SRIOV) {
if (vsi->netdev_registered) {
--
2.33.0
From: Nicolas Dichtel <[email protected]>
commit a31d27fbed5d518734cb60956303eb15089a7634 upstream.
As stated in the bonding doc, trans_start must be set manually for drivers
using NETIF_F_LLTX:
Drivers that use NETIF_F_LLTX flag must also update
netdev_queue->trans_start. If they do not, then the ARP monitor will
immediately fail any slaves using that driver, and those slaves will stay
down.
Link: https://www.kernel.org/doc/html/v5.15/networking/bonding.html#arp-monitor-operation
Signed-off-by: Nicolas Dichtel <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/tun.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -858,6 +858,7 @@ static netdev_tx_t tun_net_xmit(struct s
{
struct tun_struct *tun = netdev_priv(dev);
int txq = skb->queue_mapping;
+ struct netdev_queue *queue;
struct tun_file *tfile;
u32 numqueues = 0;
@@ -916,6 +917,10 @@ static netdev_tx_t tun_net_xmit(struct s
if (skb_array_produce(&tfile->tx_array, skb))
goto drop;
+ /* NETIF_F_LLTX requires to do our own update of trans_start */
+ queue = netdev_get_tx_queue(dev, txq);
+ queue->trans_start = jiffies;
+
/* Notify and wake up reader process */
if (tfile->flags & TUN_FASYNC)
kill_fasync(&tfile->fasync, SIGIO, POLL_IN);
From: Alexander Antonov <[email protected]>
[ Upstream commit e324234e0aa881b7841c7c713306403e12b069ff ]
According Uncore Reference Manual: any of the CHA events may be filtered
by Thread/Core-ID by using tid modifier in CHA Filter 0 Register.
Update skx_cha_hw_config() to follow Uncore Guide.
Fixes: cd34cd97b7b4 ("perf/x86/intel/uncore: Add Skylake server uncore support")
Signed-off-by: Alexander Antonov <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Kan Liang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/events/intel/uncore_snbep.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/x86/events/intel/uncore_snbep.c b/arch/x86/events/intel/uncore_snbep.c
index 6b66285c6cede..9cce6d9fec1f4 100644
--- a/arch/x86/events/intel/uncore_snbep.c
+++ b/arch/x86/events/intel/uncore_snbep.c
@@ -3383,6 +3383,9 @@ static int skx_cha_hw_config(struct intel_uncore_box *box, struct perf_event *ev
struct hw_perf_event_extra *reg1 = &event->hw.extra_reg;
struct extra_reg *er;
int idx = 0;
+ /* Any of the CHA events may be filtered by Thread/Core-ID.*/
+ if (event->hw.config & SNBEP_CBO_PMON_CTL_TID_EN)
+ idx = SKX_CHA_MSR_PMON_BOX_FILTER_TID;
for (er = skx_uncore_cha_extra_regs; er->msr; er++) {
if (er->event != (event->hw.config & er->config_mask))
--
2.33.0
From: Alexander Antonov <[email protected]>
[ Upstream commit 3866ae319c846a612109c008f43cba80b8c15e86 ]
According to the latest uncore document, COMP_BUF_OCCUPANCY (0xd5) event
can be collected on 2-3 counters. Update uncore IIO event constraints for
Skylake Server.
Fixes: cd34cd97b7b4 ("perf/x86/intel/uncore: Add Skylake server uncore support")
Signed-off-by: Alexander Antonov <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Kan Liang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/events/intel/uncore_snbep.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/x86/events/intel/uncore_snbep.c b/arch/x86/events/intel/uncore_snbep.c
index 9cce6d9fec1f4..b039d416fef34 100644
--- a/arch/x86/events/intel/uncore_snbep.c
+++ b/arch/x86/events/intel/uncore_snbep.c
@@ -3453,6 +3453,7 @@ static struct event_constraint skx_uncore_iio_constraints[] = {
UNCORE_EVENT_CONSTRAINT(0xc0, 0xc),
UNCORE_EVENT_CONSTRAINT(0xc5, 0xc),
UNCORE_EVENT_CONSTRAINT(0xd4, 0xc),
+ UNCORE_EVENT_CONSTRAINT(0xd5, 0xc),
EVENT_CONSTRAINT_END
};
--
2.33.0
From: Nathan Chancellor <[email protected]>
commit ffb92ce826fd801acb0f4e15b75e4ddf0d189bde upstream.
Patch series "Fixes for ARCH=hexagon allmodconfig", v2.
This series fixes some issues noticed with ARCH=hexagon allmodconfig.
This patch (of 3):
When building ARCH=hexagon allmodconfig, the following errors occur:
ERROR: modpost: "__raw_readsl" [drivers/i3c/master/svc-i3c-master.ko] undefined!
ERROR: modpost: "__raw_writesl" [drivers/i3c/master/dw-i3c-master.ko] undefined!
ERROR: modpost: "__raw_readsl" [drivers/i3c/master/dw-i3c-master.ko] undefined!
ERROR: modpost: "__raw_writesl" [drivers/i3c/master/i3c-master-cdns.ko] undefined!
ERROR: modpost: "__raw_readsl" [drivers/i3c/master/i3c-master-cdns.ko] undefined!
Export these symbols so that modules can use them without any errors.
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 013bf24c3829 ("Hexagon: Provide basic implementation and/or stubs for I/O routines.")
Signed-off-by: Nathan Chancellor <[email protected]>
Acked-by: Brian Cain <[email protected]>
Cc: Nick Desaulniers <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/hexagon/lib/io.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/arch/hexagon/lib/io.c
+++ b/arch/hexagon/lib/io.c
@@ -40,6 +40,7 @@ void __raw_readsw(const void __iomem *ad
*dst++ = *src;
}
+EXPORT_SYMBOL(__raw_readsw);
/*
* __raw_writesw - read words a short at a time
@@ -60,6 +61,7 @@ void __raw_writesw(void __iomem *addr, c
}
+EXPORT_SYMBOL(__raw_writesw);
/* Pretty sure len is pre-adjusted for the length of the access already */
void __raw_readsl(const void __iomem *addr, void *data, int len)
@@ -75,6 +77,7 @@ void __raw_readsl(const void __iomem *ad
}
+EXPORT_SYMBOL(__raw_readsl);
void __raw_writesl(void __iomem *addr, const void *data, int len)
{
@@ -89,3 +92,4 @@ void __raw_writesl(void __iomem *addr, c
}
+EXPORT_SYMBOL(__raw_writesl);
From: Rustam Kovhaev <[email protected]>
commit 34dbc3aaf5d9e89ba6cc5e24add9458c21ab1950 upstream.
When kmemleak is enabled for SLOB, system does not boot and does not
print anything to the console. At the very early stage in the boot
process we hit infinite recursion from kmemleak_init() and eventually
kernel crashes.
kmemleak_init() specifies SLAB_NOLEAKTRACE for KMEM_CACHE(), but
kmem_cache_create_usercopy() removes it because CACHE_CREATE_MASK is not
valid for SLOB.
Let's fix CACHE_CREATE_MASK and make kmemleak work with SLOB
Link: https://lkml.kernel.org/r/[email protected]
Fixes: d8843922fba4 ("slab: Ignore internal flags in cache creation")
Signed-off-by: Rustam Kovhaev <[email protected]>
Acked-by: Vlastimil Babka <[email protected]>
Reviewed-by: Muchun Song <[email protected]>
Cc: Christoph Lameter <[email protected]>
Cc: Pekka Enberg <[email protected]>
Cc: David Rientjes <[email protected]>
Cc: Joonsoo Kim <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Glauber Costa <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/slab.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/mm/slab.h
+++ b/mm/slab.h
@@ -146,7 +146,7 @@ static inline unsigned long kmem_cache_f
#define SLAB_CACHE_FLAGS (SLAB_NOLEAKTRACE | SLAB_RECLAIM_ACCOUNT | \
SLAB_TEMPORARY | SLAB_ACCOUNT)
#else
-#define SLAB_CACHE_FLAGS (0)
+#define SLAB_CACHE_FLAGS (SLAB_NOLEAKTRACE)
#endif
/* Common flags available with current configuration */
From: Nikolay Borisov <[email protected]>
commit 45da9c1767ac31857df572f0a909fbe88fd5a7e9 upstream.
Ordered work functions aren't guaranteed to be handled by the same thread
which executed the normal work functions. The only way execution between
normal/ordered functions is synchronized is via the WORK_DONE_BIT,
unfortunately the used bitops don't guarantee any ordering whatsoever.
This manifested as seemingly inexplicable crashes on ARM64, where
async_chunk::inode is seen as non-null in async_cow_submit which causes
submit_compressed_extents to be called and crash occurs because
async_chunk::inode suddenly became NULL. The call trace was similar to:
pc : submit_compressed_extents+0x38/0x3d0
lr : async_cow_submit+0x50/0xd0
sp : ffff800015d4bc20
<registers omitted for brevity>
Call trace:
submit_compressed_extents+0x38/0x3d0
async_cow_submit+0x50/0xd0
run_ordered_work+0xc8/0x280
btrfs_work_helper+0x98/0x250
process_one_work+0x1f0/0x4ac
worker_thread+0x188/0x504
kthread+0x110/0x114
ret_from_fork+0x10/0x18
Fix this by adding respective barrier calls which ensure that all
accesses preceding setting of WORK_DONE_BIT are strictly ordered before
setting the flag. At the same time add a read barrier after reading of
WORK_DONE_BIT in run_ordered_work which ensures all subsequent loads
would be strictly ordered after reading the bit. This in turn ensures
are all accesses before WORK_DONE_BIT are going to be strictly ordered
before any access that can occur in ordered_func.
Reported-by: Chris Murphy <[email protected]>
Fixes: 08a9ff326418 ("btrfs: Added btrfs_workqueue_struct implemented ordered execution based on kernel workqueue")
CC: [email protected] # 4.4+
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2011928
Reviewed-by: Josef Bacik <[email protected]>
Tested-by: Chris Murphy <[email protected]>
Signed-off-by: Nikolay Borisov <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/btrfs/async-thread.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)
--- a/fs/btrfs/async-thread.c
+++ b/fs/btrfs/async-thread.c
@@ -283,6 +283,13 @@ static void run_ordered_work(struct __bt
ordered_list);
if (!test_bit(WORK_DONE_BIT, &work->flags))
break;
+ /*
+ * Orders all subsequent loads after reading WORK_DONE_BIT,
+ * paired with the smp_mb__before_atomic in btrfs_work_helper
+ * this guarantees that the ordered function will see all
+ * updates from ordinary work function.
+ */
+ smp_rmb();
/*
* we are going to call the ordered done function, but
@@ -368,6 +375,13 @@ static void normal_work_helper(struct bt
thresh_exec_hook(wq);
work->func(work);
if (need_order) {
+ /*
+ * Ensures all memory accesses done in the work function are
+ * ordered before setting the WORK_DONE_BIT. Ensuring the thread
+ * which is going to executed the ordered work sees them.
+ * Pairs with the smp_rmb in run_ordered_work.
+ */
+ smp_mb__before_atomic();
set_bit(WORK_DONE_BIT, &work->flags);
run_ordered_work(wq, work);
}
From: Nguyen Dinh Phi <[email protected]>
commit 563fbefed46ae4c1f70cffb8eb54c02df480b2c2 upstream.
If the userspace tools switch from NL80211_IFTYPE_P2P_GO to
NL80211_IFTYPE_ADHOC via send_msg(NL80211_CMD_SET_INTERFACE), it
does not call the cleanup cfg80211_stop_ap(), this leads to the
initialization of in-use data. For example, this path re-init the
sdata->assigned_chanctx_list while it is still an element of
assigned_vifs list, and makes that linked list corrupt.
Signed-off-by: Nguyen Dinh Phi <[email protected]>
Reported-by: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Cc: [email protected]
Fixes: ac800140c20e ("cfg80211: .stop_ap when interface is going down")
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/wireless/util.c | 1 +
1 file changed, 1 insertion(+)
--- a/net/wireless/util.c
+++ b/net/wireless/util.c
@@ -1026,6 +1026,7 @@ int cfg80211_change_iface(struct cfg8021
switch (otype) {
case NL80211_IFTYPE_AP:
+ case NL80211_IFTYPE_P2P_GO:
cfg80211_stop_ap(rdev, dev, true);
break;
case NL80211_IFTYPE_ADHOC:
From: Johan Hovold <[email protected]>
commit 5591c8f79db1729d9c5ac7f5b4d3a5c26e262d93 upstream.
USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.
Fixes: 5320918b9a87 ("drm/udl: initial UDL driver (v4)")
Cc: [email protected] # 3.4
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/udl/udl_connector.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/gpu/drm/udl/udl_connector.c
+++ b/drivers/gpu/drm/udl/udl_connector.c
@@ -37,7 +37,7 @@ static u8 *udl_get_edid(struct udl_devic
ret = usb_control_msg(udl->udev,
usb_rcvctrlpipe(udl->udev, 0), (0x02),
(0x80 | (0x02 << 5)), i << 8, 0xA1, rbuf, 2,
- HZ);
+ 1000);
if (ret < 1) {
DRM_ERROR("Read EDID byte %d failed err %x\n", i, ret);
goto error;
From: hongao <[email protected]>
commit bf552083916a7f8800477b5986940d1c9a31b953 upstream.
amdgpu_connector_vga_get_modes missed function amdgpu_get_native_mode
which assign amdgpu_encoder->native_mode with *preferred_mode result in
amdgpu_encoder->native_mode.clock always be 0. That will cause
amdgpu_connector_set_property returned early on:
if ((rmx_type != DRM_MODE_SCALE_NONE) &&
(amdgpu_encoder->native_mode.clock == 0))
when we try to set scaling mode Full/Full aspect/Center.
Add the missing function to amdgpu_connector_vga_get_mode can fix this.
It also works on dvi connectors because
amdgpu_connector_dvi_helper_funcs.get_mode use the same method.
Signed-off-by: hongao <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c
@@ -844,6 +844,7 @@ static int amdgpu_connector_vga_get_mode
amdgpu_connector_get_edid(connector);
ret = amdgpu_connector_ddc_get_modes(connector);
+ amdgpu_get_native_mode(connector);
return ret;
}
From: Anatolij Gustschin <[email protected]>
[ Upstream commit aed2886a5e9ffc8269a4220bff1e9e030d3d2eb1 ]
Fixes build warnings:
Warning (unit_address_vs_reg): /memory: node has a reg or ranges property, but no unit name
Signed-off-by: Anatolij Gustschin <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/boot/dts/charon.dts | 2 +-
arch/powerpc/boot/dts/digsy_mtc.dts | 2 +-
arch/powerpc/boot/dts/lite5200.dts | 2 +-
arch/powerpc/boot/dts/lite5200b.dts | 2 +-
arch/powerpc/boot/dts/media5200.dts | 2 +-
arch/powerpc/boot/dts/mpc5200b.dtsi | 2 +-
arch/powerpc/boot/dts/o2d.dts | 2 +-
arch/powerpc/boot/dts/o2d.dtsi | 2 +-
arch/powerpc/boot/dts/o2dnt2.dts | 2 +-
arch/powerpc/boot/dts/o3dnt.dts | 2 +-
arch/powerpc/boot/dts/pcm032.dts | 2 +-
arch/powerpc/boot/dts/tqm5200.dts | 2 +-
12 files changed, 12 insertions(+), 12 deletions(-)
diff --git a/arch/powerpc/boot/dts/charon.dts b/arch/powerpc/boot/dts/charon.dts
index 0e00e508eaa6a..1c8fe20752e6a 100644
--- a/arch/powerpc/boot/dts/charon.dts
+++ b/arch/powerpc/boot/dts/charon.dts
@@ -39,7 +39,7 @@
};
};
- memory {
+ memory@0 {
device_type = "memory";
reg = <0x00000000 0x08000000>; // 128MB
};
diff --git a/arch/powerpc/boot/dts/digsy_mtc.dts b/arch/powerpc/boot/dts/digsy_mtc.dts
index c280e75c86bfd..d4a0a367ed66b 100644
--- a/arch/powerpc/boot/dts/digsy_mtc.dts
+++ b/arch/powerpc/boot/dts/digsy_mtc.dts
@@ -20,7 +20,7 @@
model = "intercontrol,digsy-mtc";
compatible = "intercontrol,digsy-mtc";
- memory {
+ memory@0 {
reg = <0x00000000 0x02000000>; // 32MB
};
diff --git a/arch/powerpc/boot/dts/lite5200.dts b/arch/powerpc/boot/dts/lite5200.dts
index 179a1785d6454..18d137a3393f0 100644
--- a/arch/powerpc/boot/dts/lite5200.dts
+++ b/arch/powerpc/boot/dts/lite5200.dts
@@ -36,7 +36,7 @@
};
};
- memory {
+ memory@0 {
device_type = "memory";
reg = <0x00000000 0x04000000>; // 64MB
};
diff --git a/arch/powerpc/boot/dts/lite5200b.dts b/arch/powerpc/boot/dts/lite5200b.dts
index 5abb46c5cc951..29419cf81e044 100644
--- a/arch/powerpc/boot/dts/lite5200b.dts
+++ b/arch/powerpc/boot/dts/lite5200b.dts
@@ -35,7 +35,7 @@
led4 { gpios = <&gpio_simple 2 1>; };
};
- memory {
+ memory@0 {
reg = <0x00000000 0x10000000>; // 256MB
};
diff --git a/arch/powerpc/boot/dts/media5200.dts b/arch/powerpc/boot/dts/media5200.dts
index b5413cb85f134..3d57463bc49da 100644
--- a/arch/powerpc/boot/dts/media5200.dts
+++ b/arch/powerpc/boot/dts/media5200.dts
@@ -36,7 +36,7 @@
};
};
- memory {
+ memory@0 {
reg = <0x00000000 0x08000000>; // 128MB RAM
};
diff --git a/arch/powerpc/boot/dts/mpc5200b.dtsi b/arch/powerpc/boot/dts/mpc5200b.dtsi
index 969b2200b2f97..ecfba675b5611 100644
--- a/arch/powerpc/boot/dts/mpc5200b.dtsi
+++ b/arch/powerpc/boot/dts/mpc5200b.dtsi
@@ -37,7 +37,7 @@
};
};
- memory: memory {
+ memory: memory@0 {
device_type = "memory";
reg = <0x00000000 0x04000000>; // 64MB
};
diff --git a/arch/powerpc/boot/dts/o2d.dts b/arch/powerpc/boot/dts/o2d.dts
index 9f6dd4d889b32..5a676e8141caf 100644
--- a/arch/powerpc/boot/dts/o2d.dts
+++ b/arch/powerpc/boot/dts/o2d.dts
@@ -16,7 +16,7 @@
model = "ifm,o2d";
compatible = "ifm,o2d";
- memory {
+ memory@0 {
reg = <0x00000000 0x08000000>; // 128MB
};
diff --git a/arch/powerpc/boot/dts/o2d.dtsi b/arch/powerpc/boot/dts/o2d.dtsi
index cf073e693f24d..1b4df5f64b580 100644
--- a/arch/powerpc/boot/dts/o2d.dtsi
+++ b/arch/powerpc/boot/dts/o2d.dtsi
@@ -23,7 +23,7 @@
model = "ifm,o2d";
compatible = "ifm,o2d";
- memory {
+ memory@0 {
reg = <0x00000000 0x04000000>; // 64MB
};
diff --git a/arch/powerpc/boot/dts/o2dnt2.dts b/arch/powerpc/boot/dts/o2dnt2.dts
index a0f5b97a4f06e..5184c461a205f 100644
--- a/arch/powerpc/boot/dts/o2dnt2.dts
+++ b/arch/powerpc/boot/dts/o2dnt2.dts
@@ -16,7 +16,7 @@
model = "ifm,o2dnt2";
compatible = "ifm,o2d";
- memory {
+ memory@0 {
reg = <0x00000000 0x08000000>; // 128MB
};
diff --git a/arch/powerpc/boot/dts/o3dnt.dts b/arch/powerpc/boot/dts/o3dnt.dts
index acce49326491b..045b901719245 100644
--- a/arch/powerpc/boot/dts/o3dnt.dts
+++ b/arch/powerpc/boot/dts/o3dnt.dts
@@ -16,7 +16,7 @@
model = "ifm,o3dnt";
compatible = "ifm,o2d";
- memory {
+ memory@0 {
reg = <0x00000000 0x04000000>; // 64MB
};
diff --git a/arch/powerpc/boot/dts/pcm032.dts b/arch/powerpc/boot/dts/pcm032.dts
index 576249bf2fb91..637e14286dde5 100644
--- a/arch/powerpc/boot/dts/pcm032.dts
+++ b/arch/powerpc/boot/dts/pcm032.dts
@@ -26,7 +26,7 @@
model = "phytec,pcm032";
compatible = "phytec,pcm032";
- memory {
+ memory@0 {
reg = <0x00000000 0x08000000>; // 128MB
};
diff --git a/arch/powerpc/boot/dts/tqm5200.dts b/arch/powerpc/boot/dts/tqm5200.dts
index 1db07f6cf133c..68b9e8240fb5b 100644
--- a/arch/powerpc/boot/dts/tqm5200.dts
+++ b/arch/powerpc/boot/dts/tqm5200.dts
@@ -36,7 +36,7 @@
};
};
- memory {
+ memory@0 {
device_type = "memory";
reg = <0x00000000 0x04000000>; // 64MB
};
--
2.33.0
From: Greg Thelen <[email protected]>
commit 4716023a8f6a0f4a28047f14dd7ebdc319606b84 upstream.
PEBS PERF_SAMPLE_PHYS_ADDR events use perf_virt_to_phys() to convert PMU
sampled virtual addresses to physical using get_user_page_fast_only()
and page_to_phys().
Some get_user_page_fast_only() error cases return false, indicating no
page reference, but still initialize the output page pointer with an
unreferenced page. In these error cases perf_virt_to_phys() calls
put_page(). This causes page reference count underflow, which can lead
to unintentional page sharing.
Fix perf_virt_to_phys() to only put_page() if get_user_page_fast_only()
returns a referenced page.
Fixes: fc7ce9c74c3ad ("perf/core, x86: Add PERF_SAMPLE_PHYS_ADDR")
Signed-off-by: Greg Thelen <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/events/core.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -6110,7 +6110,6 @@ void perf_output_sample(struct perf_outp
static u64 perf_virt_to_phys(u64 virt)
{
u64 phys_addr = 0;
- struct page *p = NULL;
if (!virt)
return 0;
@@ -6129,14 +6128,15 @@ static u64 perf_virt_to_phys(u64 virt)
* If failed, leave phys_addr as 0.
*/
if (current->mm != NULL) {
+ struct page *p;
+
pagefault_disable();
- if (__get_user_pages_fast(virt, 1, 0, &p) == 1)
+ if (__get_user_pages_fast(virt, 1, 0, &p) == 1) {
phys_addr = page_to_phys(p) + virt % PAGE_SIZE;
+ put_page(p);
+ }
pagefault_enable();
}
-
- if (p)
- put_page(p);
}
return phys_addr;
From: Chengfeng Ye <[email protected]>
[ Upstream commit a0d21bb3279476c777434c40d969ea88ca64f9aa ]
The pointer block return from snd_gf1_dma_next_block could be
null, so there is a potential null pointer dereference issue.
Fix this by adding a null check before dereference.
Signed-off-by: Chengfeng Ye <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/isa/gus/gus_dma.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/sound/isa/gus/gus_dma.c b/sound/isa/gus/gus_dma.c
index 36c27c8323601..2e27cd3427c87 100644
--- a/sound/isa/gus/gus_dma.c
+++ b/sound/isa/gus/gus_dma.c
@@ -141,6 +141,8 @@ static void snd_gf1_dma_interrupt(struct snd_gus_card * gus)
}
block = snd_gf1_dma_next_block(gus);
spin_unlock(&gus->dma_lock);
+ if (!block)
+ return;
snd_gf1_dma_program(gus, block->addr, block->buf_addr, block->count, (unsigned short) block->cmd);
kfree(block);
#if 0
--
2.33.0
From: Randy Dunlap <[email protected]>
[ Upstream commit fda1bc533094a7db68b11e7503d2c6c73993d12a ]
FRAME_POINTER depends on DEBUG_KERNEL so DWARF_UNWINDER should
depend on DEBUG_KERNEL before selecting FRAME_POINTER.
WARNING: unmet direct dependencies detected for FRAME_POINTER
Depends on [n]: DEBUG_KERNEL [=n] && (M68K || UML || SUPERH [=y]) || ARCH_WANT_FRAME_POINTERS [=n]
Selected by [y]:
- DWARF_UNWINDER [=y]
Fixes: bd353861c735 ("sh: dwarf unwinder support.")
Signed-off-by: Randy Dunlap <[email protected]>
Cc: Matt Fleming <[email protected]>
Cc: Matt Fleming <[email protected]>
Cc: Yoshinori Sato <[email protected]>
Cc: John Paul Adrian Glaubitz <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Tested-by: John Paul Adrian Glaubitz <[email protected]>
Signed-off-by: Rich Felker <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/sh/Kconfig.debug | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug
index d0767672640d8..4209405179262 100644
--- a/arch/sh/Kconfig.debug
+++ b/arch/sh/Kconfig.debug
@@ -61,6 +61,7 @@ config DUMP_CODE
config DWARF_UNWINDER
bool "Enable the DWARF unwinder for stacktraces"
+ depends on DEBUG_KERNEL
select FRAME_POINTER
depends on SUPERH32
default n
--
2.33.0
From: Guanghui Feng <[email protected]>
[ Upstream commit 3968ddcf05fb4b9409cd1859feb06a5b0550a1c1 ]
When running ltp testcase(ltp/testcases/kernel/pty/pty04.c) with arm64, there is a soft lockup,
which look like this one:
Workqueue: events_unbound flush_to_ldisc
Call trace:
dump_backtrace+0x0/0x1ec
show_stack+0x24/0x30
dump_stack+0xd0/0x128
panic+0x15c/0x374
watchdog_timer_fn+0x2b8/0x304
__run_hrtimer+0x88/0x2c0
__hrtimer_run_queues+0xa4/0x120
hrtimer_interrupt+0xfc/0x270
arch_timer_handler_phys+0x40/0x50
handle_percpu_devid_irq+0x94/0x220
__handle_domain_irq+0x88/0xf0
gic_handle_irq+0x84/0xfc
el1_irq+0xc8/0x180
slip_unesc+0x80/0x214 [slip]
tty_ldisc_receive_buf+0x64/0x80
tty_port_default_receive_buf+0x50/0x90
flush_to_ldisc+0xbc/0x110
process_one_work+0x1d4/0x4b0
worker_thread+0x180/0x430
kthread+0x11c/0x120
In the testcase pty04, The first process call the write syscall to send
data to the pty master. At the same time, the workqueue will do the
flush_to_ldisc to pop data in a loop until there is no more data left.
When the sender and workqueue running in different core, the sender sends
data fastly in full time which will result in workqueue doing work in loop
for a long time and occuring softlockup in flush_to_ldisc with kernel
configured without preempt. So I add need_resched check and cond_resched
in the flush_to_ldisc loop to avoid it.
Signed-off-by: Guanghui Feng <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/tty/tty_buffer.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index cf11882d26025..a5b32dd056bef 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -528,6 +528,9 @@ static void flush_to_ldisc(struct work_struct *work)
if (!count)
break;
head->read += count;
+
+ if (need_resched())
+ cond_resched();
}
mutex_unlock(&buf->lock);
--
2.33.0
From: Lu Wei <[email protected]>
[ Upstream commit bde82ee391fa6d3ad054313c4aa7b726d32515ce ]
If KMEM_CACHE or maple_alloc_dev failed, the maple_bus_init() will return 0
rather than error, because the retval is not changed after KMEM_CACHE or
maple_alloc_dev failed.
Fixes: 17be2d2b1c33 ("sh: Add maple bus support for the SEGA Dreamcast.")
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Lu Wei <[email protected]>
Acked-by: John Paul Adrian Glaubitz <[email protected]>
Signed-off-by: Rich Felker <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/sh/maple/maple.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/sh/maple/maple.c b/drivers/sh/maple/maple.c
index bec81c2404f78..1682fa3671bc3 100644
--- a/drivers/sh/maple/maple.c
+++ b/drivers/sh/maple/maple.c
@@ -835,8 +835,10 @@ static int __init maple_bus_init(void)
maple_queue_cache = KMEM_CACHE(maple_buffer, SLAB_HWCACHE_ALIGN);
- if (!maple_queue_cache)
+ if (!maple_queue_cache) {
+ retval = -ENOMEM;
goto cleanup_bothirqs;
+ }
INIT_LIST_HEAD(&maple_waitq);
INIT_LIST_HEAD(&maple_sentq);
@@ -849,6 +851,7 @@ static int __init maple_bus_init(void)
if (!mdev[i]) {
while (i-- > 0)
maple_free_dev(mdev[i]);
+ retval = -ENOMEM;
goto cleanup_cache;
}
baseunits[i] = mdev[i];
--
2.33.0
From: Nick Desaulniers <[email protected]>
[ Upstream commit 0e38225c92c7964482a8bb6b3e37fde4319e965c ]
request_irq is marked __must_check, but the call in shx3_prepare_cpus
has a void return type, so it can't propagate failure to the caller.
Follow cues from hexagon and just print an error.
Fixes: c7936b9abcf5 ("sh: smp: Hook in to the generic IPI handler for SH-X3 SMP.")
Cc: Miguel Ojeda <[email protected]>
Cc: Paul Mundt <[email protected]>
Reported-by: Guenter Roeck <[email protected]>
Signed-off-by: Nick Desaulniers <[email protected]>
Tested-by: John Paul Adrian Glaubitz <[email protected]>
Reviewed-by: Miguel Ojeda <[email protected]>
Signed-off-by: Rich Felker <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/sh/kernel/cpu/sh4a/smp-shx3.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/arch/sh/kernel/cpu/sh4a/smp-shx3.c b/arch/sh/kernel/cpu/sh4a/smp-shx3.c
index 0d3637c494bfe..c1f66c35e0c12 100644
--- a/arch/sh/kernel/cpu/sh4a/smp-shx3.c
+++ b/arch/sh/kernel/cpu/sh4a/smp-shx3.c
@@ -76,8 +76,9 @@ static void shx3_prepare_cpus(unsigned int max_cpus)
BUILD_BUG_ON(SMP_MSG_NR >= 8);
for (i = 0; i < SMP_MSG_NR; i++)
- request_irq(104 + i, ipi_interrupt_handler,
- IRQF_PERCPU, "IPI", (void *)(long)i);
+ if (request_irq(104 + i, ipi_interrupt_handler,
+ IRQF_PERCPU, "IPI", (void *)(long)i))
+ pr_err("Failed to request irq %d\n", i);
for (i = 0; i < max_cpus; i++)
set_cpu_present(i, true);
--
2.33.0
From: Michael Ellerman <[email protected]>
[ Upstream commit fef071be57dc43679a32d5b0e6ee176d6f12e9f2 ]
In dcr-low.S we use cmpli with three arguments, instead of four
arguments as defined in the ISA:
cmpli cr0,r3,1024
This appears to be a PPC440-ism, looking at the "PPC440x5 CPU Core
User’s Manual" it shows cmpli having no L field, but implied to be 0 due
to the core being 32-bit. It mentions that the ISA defines four
arguments and recommends using cmplwi.
It also corresponds to the old POWER instruction set, which had no L
field there, a reserved bit instead.
dcr-low.S is only built 32-bit, because it is only built when
DCR_NATIVE=y, which is only selected by 40x and 44x. Looking at the
generated code (with gcc/gas) we see cmplwi as expected.
Although gas is happy with the 3-argument version when building for
32-bit, the LLVM assembler is not and errors out with:
arch/powerpc/sysdev/dcr-low.S:27:10: error: invalid operand for instruction
cmpli 0,%r3,1024; ...
^
Switch to the cmplwi extended opcode, which avoids any confusion when
reading the ISA, fixes the issue with the LLVM assembler, and also means
the code could be built 64-bit in future (though that's very unlikely).
Reported-by: Nick Desaulniers <[email protected]>
Reviewed-by: Nick Desaulniers <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
BugLink: https://github.com/ClangBuiltLinux/linux/issues/1419
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/sysdev/dcr-low.S | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/powerpc/sysdev/dcr-low.S b/arch/powerpc/sysdev/dcr-low.S
index e687bb2003ff0..5589fbe48bbdc 100644
--- a/arch/powerpc/sysdev/dcr-low.S
+++ b/arch/powerpc/sysdev/dcr-low.S
@@ -15,7 +15,7 @@
#include <asm/export.h>
#define DCR_ACCESS_PROLOG(table) \
- cmpli cr0,r3,1024; \
+ cmplwi cr0,r3,1024; \
rlwinm r3,r3,4,18,27; \
lis r5,table@h; \
ori r5,r5,table@l; \
--
2.33.0
From: Linus L?ssing <[email protected]>
commit 2369e827046920ef0599e6a36b975ac5c0a359c2 upstream.
Scenario:
* Multicast frame send from BLA backbone gateways (multiple nodes
with their bat0 bridged together, with BLA enabled) sharing the same
LAN to nodes in the mesh
Issue:
* Nodes receive the frame multiple times on bat0 from the mesh,
once from each foreign BLA backbone gateway which shares the same LAN
with another
For multicast frames via batman-adv broadcast packets coming from the
same BLA backbone but from different backbone gateways duplicates are
currently detected via a CRC history of previously received packets.
However this CRC so far was not performed for multicast frames received
via batman-adv unicast packets. Fixing this by appyling the same check
for such packets, too.
Room for improvements in the future: Ideally we would introduce the
possibility to not only claim a client, but a complete originator, too.
This would allow us to only send a multicast-in-unicast packet from a BLA
backbone gateway claiming the node and by that avoid potential redundant
transmissions in the first place.
Fixes: fe2da6ff27c7 ("batman-adv: add broadcast duplicate check")
Signed-off-by: Linus L?ssing <[email protected]>
Signed-off-by: Simon Wunderlich <[email protected]>
[ bp: 4.14 backported: adjust context, correct fixes line ]
Signed-off-by: Sven Eckelmann <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/batman-adv/bridge_loop_avoidance.c | 105 +++++++++++++++++++++++++++------
1 file changed, 88 insertions(+), 17 deletions(-)
--- a/net/batman-adv/bridge_loop_avoidance.c
+++ b/net/batman-adv/bridge_loop_avoidance.c
@@ -1598,13 +1598,16 @@ int batadv_bla_init(struct batadv_priv *
}
/**
- * batadv_bla_check_bcast_duplist - Check if a frame is in the broadcast dup.
+ * batadv_bla_check_duplist() - Check if a frame is in the broadcast dup.
* @bat_priv: the bat priv with all the soft interface information
- * @skb: contains the bcast_packet to be checked
- *
- * check if it is on our broadcast list. Another gateway might
- * have sent the same packet because it is connected to the same backbone,
- * so we have to remove this duplicate.
+ * @skb: contains the multicast packet to be checked
+ * @payload_ptr: pointer to position inside the head buffer of the skb
+ * marking the start of the data to be CRC'ed
+ * @orig: originator mac address, NULL if unknown
+ *
+ * Check if it is on our broadcast list. Another gateway might have sent the
+ * same packet because it is connected to the same backbone, so we have to
+ * remove this duplicate.
*
* This is performed by checking the CRC, which will tell us
* with a good chance that it is the same packet. If it is furthermore
@@ -1613,19 +1616,17 @@ int batadv_bla_init(struct batadv_priv *
*
* Return: true if a packet is in the duplicate list, false otherwise.
*/
-bool batadv_bla_check_bcast_duplist(struct batadv_priv *bat_priv,
- struct sk_buff *skb)
+static bool batadv_bla_check_duplist(struct batadv_priv *bat_priv,
+ struct sk_buff *skb, u8 *payload_ptr,
+ const u8 *orig)
{
- int i, curr;
- __be32 crc;
- struct batadv_bcast_packet *bcast_packet;
struct batadv_bcast_duplist_entry *entry;
bool ret = false;
-
- bcast_packet = (struct batadv_bcast_packet *)skb->data;
+ int i, curr;
+ __be32 crc;
/* calculate the crc ... */
- crc = batadv_skb_crc32(skb, (u8 *)(bcast_packet + 1));
+ crc = batadv_skb_crc32(skb, payload_ptr);
spin_lock_bh(&bat_priv->bla.bcast_duplist_lock);
@@ -1644,8 +1645,21 @@ bool batadv_bla_check_bcast_duplist(stru
if (entry->crc != crc)
continue;
- if (batadv_compare_eth(entry->orig, bcast_packet->orig))
- continue;
+ /* are the originators both known and not anonymous? */
+ if (orig && !is_zero_ether_addr(orig) &&
+ !is_zero_ether_addr(entry->orig)) {
+ /* If known, check if the new frame came from
+ * the same originator:
+ * We are safe to take identical frames from the
+ * same orig, if known, as multiplications in
+ * the mesh are detected via the (orig, seqno) pair.
+ * So we can be a bit more liberal here and allow
+ * identical frames from the same orig which the source
+ * host might have sent multiple times on purpose.
+ */
+ if (batadv_compare_eth(entry->orig, orig))
+ continue;
+ }
/* this entry seems to match: same crc, not too old,
* and from another gw. therefore return true to forbid it.
@@ -1661,7 +1675,14 @@ bool batadv_bla_check_bcast_duplist(stru
entry = &bat_priv->bla.bcast_duplist[curr];
entry->crc = crc;
entry->entrytime = jiffies;
- ether_addr_copy(entry->orig, bcast_packet->orig);
+
+ /* known originator */
+ if (orig)
+ ether_addr_copy(entry->orig, orig);
+ /* anonymous originator */
+ else
+ eth_zero_addr(entry->orig);
+
bat_priv->bla.bcast_duplist_curr = curr;
out:
@@ -1671,6 +1692,48 @@ out:
}
/**
+ * batadv_bla_check_ucast_duplist() - Check if a frame is in the broadcast dup.
+ * @bat_priv: the bat priv with all the soft interface information
+ * @skb: contains the multicast packet to be checked, decapsulated from a
+ * unicast_packet
+ *
+ * Check if it is on our broadcast list. Another gateway might have sent the
+ * same packet because it is connected to the same backbone, so we have to
+ * remove this duplicate.
+ *
+ * Return: true if a packet is in the duplicate list, false otherwise.
+ */
+static bool batadv_bla_check_ucast_duplist(struct batadv_priv *bat_priv,
+ struct sk_buff *skb)
+{
+ return batadv_bla_check_duplist(bat_priv, skb, (u8 *)skb->data, NULL);
+}
+
+/**
+ * batadv_bla_check_bcast_duplist() - Check if a frame is in the broadcast dup.
+ * @bat_priv: the bat priv with all the soft interface information
+ * @skb: contains the bcast_packet to be checked
+ *
+ * Check if it is on our broadcast list. Another gateway might have sent the
+ * same packet because it is connected to the same backbone, so we have to
+ * remove this duplicate.
+ *
+ * Return: true if a packet is in the duplicate list, false otherwise.
+ */
+bool batadv_bla_check_bcast_duplist(struct batadv_priv *bat_priv,
+ struct sk_buff *skb)
+{
+ struct batadv_bcast_packet *bcast_packet;
+ u8 *payload_ptr;
+
+ bcast_packet = (struct batadv_bcast_packet *)skb->data;
+ payload_ptr = (u8 *)(bcast_packet + 1);
+
+ return batadv_bla_check_duplist(bat_priv, skb, payload_ptr,
+ bcast_packet->orig);
+}
+
+/**
* batadv_bla_is_backbone_gw_orig - Check if the originator is a gateway for
* the VLAN identified by vid.
* @bat_priv: the bat priv with all the soft interface information
@@ -1884,6 +1947,14 @@ bool batadv_bla_rx(struct batadv_priv *b
packet_type == BATADV_UNICAST)
goto handled;
+ /* potential duplicates from foreign BLA backbone gateways via
+ * multicast-in-unicast packets
+ */
+ if (is_multicast_ether_addr(ethhdr->h_dest) &&
+ packet_type == BATADV_UNICAST &&
+ batadv_bla_check_ucast_duplist(bat_priv, skb))
+ goto handled;
+
ether_addr_copy(search_claim.addr, ethhdr->h_source);
search_claim.vid = vid;
claim = batadv_claim_hash_find(bat_priv, &search_claim);
From: Mike Christie <[email protected]>
[ Upstream commit 1283c0d1a32bb924324481586b5d6e8e76f676ba ]
We can't free the tg_pt_gp in core_alua_set_tg_pt_gp_id() because it's
still accessed via configfs. Its release must go through the normal
configfs/refcount process.
The max alua_tg_pt_gps_count check should probably have been done in
core_alua_allocate_tg_pt_gp(), but with the current code userspace could
have created 0x0000ffff + 1 groups, but only set the id for 0x0000ffff.
Then it could have deleted a group with an ID set, and then set the ID for
that extra group and it would work ok.
It's unlikely, but just in case this patch continues to allow that type of
behavior, and just fixes the kfree() while in use bug.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mike Christie <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/target/target_core_alua.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/target/target_core_alua.c b/drivers/target/target_core_alua.c
index 928127642574b..18e67230fc6a3 100644
--- a/drivers/target/target_core_alua.c
+++ b/drivers/target/target_core_alua.c
@@ -1711,7 +1711,6 @@ int core_alua_set_tg_pt_gp_id(
pr_err("Maximum ALUA alua_tg_pt_gps_count:"
" 0x0000ffff reached\n");
spin_unlock(&dev->t10_alua.tg_pt_gps_lock);
- kmem_cache_free(t10_alua_tg_pt_gp_cache, tg_pt_gp);
return -ENOSPC;
}
again:
--
2.33.0
From: Sven Eckelmann <[email protected]>
commit 4ca23e2c2074465bff55ea14221175fecdf63c5f upstream.
If a batman-adv packets has to be fragmented, then the original batman-adv
packet header is not stripped away. Instead, only a new header is added in
front of the packet after it was split.
This size must be considered to avoid cost intensive reallocations during
the transmission through the various device layers.
Fixes: 7bca68c7844b ("batman-adv: Add lower layer needed_(head|tail)room to own ones")
Reported-by: Linus L?ssing <[email protected]>
Signed-off-by: Sven Eckelmann <[email protected]>
Signed-off-by: Simon Wunderlich <[email protected]>
Signed-off-by: Sven Eckelmann <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/batman-adv/hard-interface.c | 3 +++
1 file changed, 3 insertions(+)
--- a/net/batman-adv/hard-interface.c
+++ b/net/batman-adv/hard-interface.c
@@ -558,6 +558,9 @@ static void batadv_hardif_recalc_extra_s
needed_headroom = lower_headroom + (lower_header_len - ETH_HLEN);
needed_headroom += batadv_max_header_len();
+ /* fragmentation headers don't strip the unicast/... header */
+ needed_headroom += sizeof(struct batadv_frag_packet);
+
soft_iface->needed_headroom = needed_headroom;
soft_iface->needed_tailroom = lower_tailroom;
}
From: Sven Schnelle <[email protected]>
commit bec05f33ebc1006899c6d3e59a00c58881fe7626 upstream.
sticon_build_attr() checked the reverse argument and flipped
background and foreground color, but returned the non-reverse
value afterwards. Fix this and also add two local variables
for foreground and background color to make the code easier
to read.
Signed-off-by: Sven Schnelle <[email protected]>
Cc: <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/video/console/sticon.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
--- a/drivers/video/console/sticon.c
+++ b/drivers/video/console/sticon.c
@@ -291,13 +291,13 @@ static unsigned long sticon_getxy(struct
static u8 sticon_build_attr(struct vc_data *conp, u8 color, u8 intens,
u8 blink, u8 underline, u8 reverse, u8 italic)
{
- u8 attr = ((color & 0x70) >> 1) | ((color & 7));
+ u8 fg = color & 7;
+ u8 bg = (color & 0x70) >> 4;
- if (reverse) {
- color = ((color >> 3) & 0x7) | ((color & 0x7) << 3);
- }
-
- return attr;
+ if (reverse)
+ return (fg << 3) | bg;
+ else
+ return (bg << 3) | fg;
}
static void sticon_invert_region(struct vc_data *conp, u16 *p, int count)
From: Sven Eckelmann <[email protected]>
commit c5cbfc87558168ef4c3c27ce36eba6b83391db19 upstream.
The batadv net_device is trying to propagate the needed_headroom and
needed_tailroom from the lower devices. This is needed to avoid cost
intensive reallocations using pskb_expand_head during the transmission.
But the fragmentation code split the skb's without adding extra room at the
end/beginning of the various fragments. This reduced the performance of
transmissions over complex scenarios (batadv on vxlan on wireguard) because
the lower devices had to perform the reallocations at least once.
Fixes: ee75ed88879a ("batman-adv: Fragment and send skbs larger than mtu")
Signed-off-by: Sven Eckelmann <[email protected]>
Signed-off-by: Simon Wunderlich <[email protected]>
[ bp: 4.14 backported: adjust context. ]
Signed-off-by: Sven Eckelmann <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/batman-adv/fragmentation.c | 15 ++++++++++-----
1 file changed, 10 insertions(+), 5 deletions(-)
--- a/net/batman-adv/fragmentation.c
+++ b/net/batman-adv/fragmentation.c
@@ -402,6 +402,7 @@ out:
/**
* batadv_frag_create - create a fragment from skb
+ * @net_dev: outgoing device for fragment
* @skb: skb to create fragment from
* @frag_head: header to use in new fragment
* @fragment_size: size of new fragment
@@ -412,22 +413,25 @@ out:
*
* Return: the new fragment, NULL on error.
*/
-static struct sk_buff *batadv_frag_create(struct sk_buff *skb,
+static struct sk_buff *batadv_frag_create(struct net_device *net_dev,
+ struct sk_buff *skb,
struct batadv_frag_packet *frag_head,
unsigned int fragment_size)
{
+ unsigned int ll_reserved = LL_RESERVED_SPACE(net_dev);
+ unsigned int tailroom = net_dev->needed_tailroom;
struct sk_buff *skb_fragment;
unsigned int header_size = sizeof(*frag_head);
unsigned int mtu = fragment_size + header_size;
- skb_fragment = netdev_alloc_skb(NULL, mtu + ETH_HLEN);
+ skb_fragment = dev_alloc_skb(ll_reserved + mtu + tailroom);
if (!skb_fragment)
goto err;
skb_fragment->priority = skb->priority;
/* Eat the last mtu-bytes of the skb */
- skb_reserve(skb_fragment, header_size + ETH_HLEN);
+ skb_reserve(skb_fragment, ll_reserved + header_size);
skb_split(skb, skb_fragment, skb->len - fragment_size);
/* Add the header */
@@ -450,11 +454,12 @@ int batadv_frag_send_packet(struct sk_bu
struct batadv_orig_node *orig_node,
struct batadv_neigh_node *neigh_node)
{
+ struct net_device *net_dev = neigh_node->if_incoming->net_dev;
struct batadv_priv *bat_priv;
struct batadv_hard_iface *primary_if = NULL;
struct batadv_frag_packet frag_header;
struct sk_buff *skb_fragment;
- unsigned int mtu = neigh_node->if_incoming->net_dev->mtu;
+ unsigned int mtu = net_dev->mtu;
unsigned int header_size = sizeof(frag_header);
unsigned int max_fragment_size, num_fragments;
int ret;
@@ -514,7 +519,7 @@ int batadv_frag_send_packet(struct sk_bu
goto put_primary_if;
}
- skb_fragment = batadv_frag_create(skb, &frag_header,
+ skb_fragment = batadv_frag_create(net_dev, skb, &frag_header,
max_fragment_size);
if (!skb_fragment) {
ret = -ENOMEM;
From: Sven Eckelmann <[email protected]>
commit 992b03b88e36254e26e9a4977ab948683e21bd9f upstream.
When a packet is fragmented by batman-adv, the original batman-adv header
is not modified. Only a new fragmentation is inserted between the original
one and the ethernet header. The code must therefore make sure that it has
a writable region of this size in the skbuff head.
But it is not useful to always reallocate the skbuff by this size even when
there would be more than enough headroom still in the skb. The reallocation
is just to costly during in this codepath.
Fixes: ee75ed88879a ("batman-adv: Fragment and send skbs larger than mtu")
Signed-off-by: Sven Eckelmann <[email protected]>
Signed-off-by: Simon Wunderlich <[email protected]>
Signed-off-by: Sven Eckelmann <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/batman-adv/fragmentation.c | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)
--- a/net/batman-adv/fragmentation.c
+++ b/net/batman-adv/fragmentation.c
@@ -538,13 +538,14 @@ int batadv_frag_send_packet(struct sk_bu
frag_header.no++;
}
- /* Make room for the fragment header. */
- if (batadv_skb_head_push(skb, header_size) < 0 ||
- pskb_expand_head(skb, header_size + ETH_HLEN, 0, GFP_ATOMIC) < 0) {
- ret = -ENOMEM;
+ /* make sure that there is at least enough head for the fragmentation
+ * and ethernet headers
+ */
+ ret = skb_cow_head(skb, ETH_HLEN + header_size);
+ if (ret < 0)
goto put_primary_if;
- }
+ skb_push(skb, header_size);
memcpy(skb->data, &frag_header, header_size);
/* Send the last fragment */
From: Leon Romanovsky <[email protected]>
commit 83dde7498fefeb920b1def317421262317d178e5 upstream.
Like other commits in the tree add __maybe_unused to a static inline in a
C file because some clang compilers will complain about unused code:
>> drivers/infiniband/core/nldev.c:2543:1: warning: unused function '__chk_RDMA_NL_NLDEV'
MODULE_ALIAS_RDMA_NETLINK(RDMA_NL_NLDEV, 5);
^
Fixes: e3bf14bdc17a ("rdma: Autoload netlink client modules")
Link: https://lore.kernel.org/r/4a8101919b765e01d7fde6f27fd572c958deeb4a.1636267207.git.leonro@nvidia.com
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Leon Romanovsky <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/rdma/rdma_netlink.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/include/rdma/rdma_netlink.h
+++ b/include/rdma/rdma_netlink.h
@@ -24,7 +24,7 @@ enum rdma_nl_flags {
* constant as well and the compiler checks they are the same.
*/
#define MODULE_ALIAS_RDMA_NETLINK(_index, _val) \
- static inline void __chk_##_index(void) \
+ static inline void __maybe_unused __chk_##_index(void) \
{ \
BUILD_BUG_ON(_index != _val); \
} \
From: Takashi Iwai <[email protected]>
commit 827b0913a9d9d07a0c3e559dbb20ca4d6d285a54 upstream.
The recent fix for DAPM to correct the kctl change notification by the
commit 5af82c81b2c4 ("ASoC: DAPM: Fix missing kctl change
notifications") caused other regressions since it changed the behavior
of snd_soc_dapm_set_pin() that is called from several API functions.
Formerly it returned always 0 for success, but now it returns 0 or 1.
This patch addresses it, restoring the old behavior of
snd_soc_dapm_set_pin() while keeping the fix in
snd_soc_dapm_put_pin_switch().
Fixes: 5af82c81b2c4 ("ASoC: DAPM: Fix missing kctl change notifications")
Reported-by: Yu-Hsuan Hsu <[email protected]>
Cc: <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/soc/soc-dapm.c | 29 +++++++++++++++++++++++------
1 file changed, 23 insertions(+), 6 deletions(-)
--- a/sound/soc/soc-dapm.c
+++ b/sound/soc/soc-dapm.c
@@ -2491,8 +2491,13 @@ static struct snd_soc_dapm_widget *dapm_
return NULL;
}
-static int snd_soc_dapm_set_pin(struct snd_soc_dapm_context *dapm,
- const char *pin, int status)
+/*
+ * set the DAPM pin status:
+ * returns 1 when the value has been updated, 0 when unchanged, or a negative
+ * error code; called from kcontrol put callback
+ */
+static int __snd_soc_dapm_set_pin(struct snd_soc_dapm_context *dapm,
+ const char *pin, int status)
{
struct snd_soc_dapm_widget *w = dapm_find_widget(dapm, pin, true);
int ret = 0;
@@ -2518,6 +2523,18 @@ static int snd_soc_dapm_set_pin(struct s
return ret;
}
+/*
+ * similar as __snd_soc_dapm_set_pin(), but returns 0 when successful;
+ * called from several API functions below
+ */
+static int snd_soc_dapm_set_pin(struct snd_soc_dapm_context *dapm,
+ const char *pin, int status)
+{
+ int ret = __snd_soc_dapm_set_pin(dapm, pin, status);
+
+ return ret < 0 ? ret : 0;
+}
+
/**
* snd_soc_dapm_sync_unlocked - scan and power dapm paths
* @dapm: DAPM context
@@ -3445,10 +3462,10 @@ int snd_soc_dapm_put_pin_switch(struct s
const char *pin = (const char *)kcontrol->private_value;
int ret;
- if (ucontrol->value.integer.value[0])
- ret = snd_soc_dapm_enable_pin(&card->dapm, pin);
- else
- ret = snd_soc_dapm_disable_pin(&card->dapm, pin);
+ mutex_lock_nested(&card->dapm_mutex, SND_SOC_DAPM_CLASS_RUNTIME);
+ ret = __snd_soc_dapm_set_pin(&card->dapm, pin,
+ !!ucontrol->value.integer.value[0]);
+ mutex_unlock(&card->dapm_mutex);
snd_soc_dapm_sync(&card->dapm);
return ret;
From: Nadav Amit <[email protected]>
commit a4a118f2eead1d6c49e00765de89878288d4b890 upstream.
When __unmap_hugepage_range() calls to huge_pmd_unshare() succeed, a TLB
flush is missing. This TLB flush must be performed before releasing the
i_mmap_rwsem, in order to prevent an unshared PMDs page from being
released and reused before the TLB flush took place.
Arguably, a comprehensive solution would use mmu_gather interface to
batch the TLB flushes and the PMDs page release, however it is not an
easy solution: (1) try_to_unmap_one() and try_to_migrate_one() also call
huge_pmd_unshare() and they cannot use the mmu_gather interface; and (2)
deferring the release of the page reference for the PMDs page until
after i_mmap_rwsem is dropeed can confuse huge_pmd_unshare() into
thinking PMDs are shared when they are not.
Fix __unmap_hugepage_range() by adding the missing TLB flush, and
forcing a flush when unshare is successful.
Fixes: 24669e58477e ("hugetlb: use mmu_gather instead of a temporary linked list for accumulating pages)" # 3.6
Signed-off-by: Nadav Amit <[email protected]>
Reviewed-by: Mike Kravetz <[email protected]>
Cc: Aneesh Kumar K.V <[email protected]>
Cc: KAMEZAWA Hiroyuki <[email protected]>
Cc: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/asm-generic/tlb.h | 6 ++++++
mm/hugetlb.c | 19 +++++++++++++++++++
2 files changed, 25 insertions(+)
--- a/include/asm-generic/tlb.h
+++ b/include/asm-generic/tlb.h
@@ -196,6 +196,12 @@ static inline void tlb_remove_check_page
#define tlb_end_vma __tlb_end_vma
#endif
+static inline void tlb_flush_pmd_range(struct mmu_gather *tlb,
+ unsigned long address, unsigned long size)
+{
+ __tlb_adjust_range(tlb, address, size);
+}
+
#ifndef __tlb_remove_tlb_entry
#define __tlb_remove_tlb_entry(tlb, ptep, address) do { } while (0)
#endif
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -3386,6 +3386,7 @@ void __unmap_hugepage_range(struct mmu_g
unsigned long sz = huge_page_size(h);
const unsigned long mmun_start = start; /* For mmu_notifiers */
const unsigned long mmun_end = end; /* For mmu_notifiers */
+ bool force_flush = false;
WARN_ON(!is_vm_hugetlb_page(vma));
BUG_ON(start & ~huge_page_mask(h));
@@ -3407,6 +3408,8 @@ void __unmap_hugepage_range(struct mmu_g
ptl = huge_pte_lock(h, mm, ptep);
if (huge_pmd_unshare(mm, &address, ptep)) {
spin_unlock(ptl);
+ tlb_flush_pmd_range(tlb, address & PUD_MASK, PUD_SIZE);
+ force_flush = true;
continue;
}
@@ -3463,6 +3466,22 @@ void __unmap_hugepage_range(struct mmu_g
}
mmu_notifier_invalidate_range_end(mm, mmun_start, mmun_end);
tlb_end_vma(tlb, vma);
+
+ /*
+ * If we unshared PMDs, the TLB flush was not recorded in mmu_gather. We
+ * could defer the flush until now, since by holding i_mmap_rwsem we
+ * guaranteed that the last refernece would not be dropped. But we must
+ * do the flushing before we return, as otherwise i_mmap_rwsem will be
+ * dropped and the last reference to the shared PMDs page might be
+ * dropped as well.
+ *
+ * In theory we could defer the freeing of the PMD pages as well, but
+ * huge_pmd_unshare() relies on the exact page_count for the PMD page to
+ * detect sharing, so we cannot defer the release of the page either.
+ * Instead, do flush now.
+ */
+ if (force_flush)
+ tlb_flush_mmu(tlb);
}
void __unmap_hugepage_range_final(struct mmu_gather *tlb,
From: Linus L?ssing <[email protected]>
commit 3236d215ad38a3f5372e65cd1e0a52cf93d3c6a2 upstream.
Scenario:
* Multicast frame send from a BLA backbone (multiple nodes with
their bat0 bridged together, with BLA enabled)
Issue:
* BLA backbone nodes receive the frame multiple times on bat0
For multicast frames received via batman-adv broadcast packets the
originator of the broadcast packet is checked before decapsulating and
forwarding the frame to bat0 (batadv_bla_is_backbone_gw()->
batadv_recv_bcast_packet()). If it came from a node which shares the
same BLA backbone with us then it is not forwarded to bat0 to avoid a
loop.
When sending a multicast frame in a non-4-address batman-adv unicast
packet we are currently missing this check - and cannot do so because
the batman-adv unicast packet has no originator address field.
However, we can simply fix this on the sender side by only sending the
multicast frame via unicasts to interested nodes which do not share the
same BLA backbone with us. This also nicely avoids some unnecessary
transmissions on mesh side.
Note that no infinite loop was observed, probably because of dropping
via batadv_interface_tx()->batadv_bla_tx(). However the duplicates still
utterly confuse switches/bridges, ICMPv6 duplicate address detection and
neighbor discovery and therefore leads to long delays before being able
to establish TCP connections, for instance. And it also leads to the Linux
bridge printing messages like:
"br-lan: received packet on eth1 with own address as source address ..."
Fixes: 1d8ab8d3c176 ("batman-adv: Modified forwarding behaviour for multicast packets")
Signed-off-by: Linus L?ssing <[email protected]>
Signed-off-by: Simon Wunderlich <[email protected]>
[ bp: 4.14 backport: drop usage in non-existing batadv_mcast_forw_*,
correct fixes line ]
Signed-off-by: Sven Eckelmann <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/batman-adv/multicast.c | 31 +++++++++++++++++++++++++++++++
net/batman-adv/multicast.h | 15 +++++++++++++++
net/batman-adv/soft-interface.c | 5 ++---
3 files changed, 48 insertions(+), 3 deletions(-)
--- a/net/batman-adv/multicast.c
+++ b/net/batman-adv/multicast.c
@@ -55,10 +55,12 @@
#include <net/ip.h>
#include <net/ipv6.h>
+#include "bridge_loop_avoidance.h"
#include "hard-interface.h"
#include "hash.h"
#include "log.h"
#include "packet.h"
+#include "send.h"
#include "translation-table.h"
#include "tvlv.h"
@@ -1291,6 +1293,35 @@ void batadv_mcast_free(struct batadv_pri
}
/**
+ * batadv_mcast_forw_send_orig() - send a multicast packet to an originator
+ * @bat_priv: the bat priv with all the soft interface information
+ * @skb: the multicast packet to send
+ * @vid: the vlan identifier
+ * @orig_node: the originator to send the packet to
+ *
+ * Return: NET_XMIT_DROP in case of error or NET_XMIT_SUCCESS otherwise.
+ */
+int batadv_mcast_forw_send_orig(struct batadv_priv *bat_priv,
+ struct sk_buff *skb,
+ unsigned short vid,
+ struct batadv_orig_node *orig_node)
+{
+ /* Avoid sending multicast-in-unicast packets to other BLA
+ * gateways - they already got the frame from the LAN side
+ * we share with them.
+ * TODO: Refactor to take BLA into account earlier, to avoid
+ * reducing the mcast_fanout count.
+ */
+ if (batadv_bla_is_backbone_gw_orig(bat_priv, orig_node->orig, vid)) {
+ dev_kfree_skb(skb);
+ return NET_XMIT_SUCCESS;
+ }
+
+ return batadv_send_skb_unicast(bat_priv, skb, BATADV_UNICAST, 0,
+ orig_node, vid);
+}
+
+/**
* batadv_mcast_purge_orig - reset originator global mcast state modifications
* @orig: the originator which is going to get purged
*/
--- a/net/batman-adv/multicast.h
+++ b/net/batman-adv/multicast.h
@@ -43,6 +43,11 @@ enum batadv_forw_mode
batadv_mcast_forw_mode(struct batadv_priv *bat_priv, struct sk_buff *skb,
struct batadv_orig_node **mcast_single_orig);
+int batadv_mcast_forw_send_orig(struct batadv_priv *bat_priv,
+ struct sk_buff *skb,
+ unsigned short vid,
+ struct batadv_orig_node *orig_node);
+
void batadv_mcast_init(struct batadv_priv *bat_priv);
int batadv_mcast_flags_seq_print_text(struct seq_file *seq, void *offset);
@@ -65,6 +70,16 @@ static inline int batadv_mcast_init(stru
return 0;
}
+static inline int
+batadv_mcast_forw_send_orig(struct batadv_priv *bat_priv,
+ struct sk_buff *skb,
+ unsigned short vid,
+ struct batadv_orig_node *orig_node)
+{
+ kfree_skb(skb);
+ return NET_XMIT_DROP;
+}
+
static inline void batadv_mcast_free(struct batadv_priv *bat_priv)
{
}
--- a/net/batman-adv/soft-interface.c
+++ b/net/batman-adv/soft-interface.c
@@ -359,9 +359,8 @@ send:
goto dropped;
ret = batadv_send_skb_via_gw(bat_priv, skb, vid);
} else if (mcast_single_orig) {
- ret = batadv_send_skb_unicast(bat_priv, skb,
- BATADV_UNICAST, 0,
- mcast_single_orig, vid);
+ ret = batadv_mcast_forw_send_orig(bat_priv, skb, vid,
+ mcast_single_orig);
} else {
if (batadv_dat_snoop_outgoing_arp_request(bat_priv,
skb))
From: Uwe Kleine-König <[email protected]>
commit fc153aba3ef371d0d76eb88230ed4e0dee5b38f2 upstream.
Instead of maintaining a single-linked list of devices that must be
searched linearly in .remove() just use spi_set_drvdata() to remember the
link between the spi device and the driver struct. Then the global list
and the next member can be dropped.
This simplifies the driver, reduces the memory footprint and the time to
search the list. Also it makes obvious that there is always a corresponding
driver struct for a given device in .remove(), so the error path for
!max3421_hcd can be dropped, too.
As a side effect this fixes a data inconsistency when .probe() races with
itself for a second max3421 device in manipulating max3421_hcd_list. A
similar race is fixed in .remove(), too.
Fixes: 2d53139f3162 ("Add support for using a MAX3421E chip as a host driver.")
Signed-off-by: Uwe Kleine-König <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/host/max3421-hcd.c | 25 +++++--------------------
1 file changed, 5 insertions(+), 20 deletions(-)
--- a/drivers/usb/host/max3421-hcd.c
+++ b/drivers/usb/host/max3421-hcd.c
@@ -121,8 +121,6 @@ struct max3421_hcd {
struct task_struct *spi_thread;
- struct max3421_hcd *next;
-
enum max3421_rh_state rh_state;
/* lower 16 bits contain port status, upper 16 bits the change mask: */
u32 port_status;
@@ -170,8 +168,6 @@ struct max3421_ep {
u8 retransmit; /* packet needs retransmission */
};
-static struct max3421_hcd *max3421_hcd_list;
-
#define MAX3421_FIFO_SIZE 64
#define MAX3421_SPI_DIR_RD 0 /* read register from MAX3421 */
@@ -1835,9 +1831,8 @@ max3421_probe(struct spi_device *spi)
}
set_bit(HCD_FLAG_POLL_RH, &hcd->flags);
max3421_hcd = hcd_to_max3421(hcd);
- max3421_hcd->next = max3421_hcd_list;
- max3421_hcd_list = max3421_hcd;
INIT_LIST_HEAD(&max3421_hcd->ep_list);
+ spi_set_drvdata(spi, max3421_hcd);
max3421_hcd->tx = kmalloc(sizeof(*max3421_hcd->tx), GFP_KERNEL);
if (!max3421_hcd->tx)
@@ -1882,28 +1877,18 @@ error:
static int
max3421_remove(struct spi_device *spi)
{
- struct max3421_hcd *max3421_hcd = NULL, **prev;
- struct usb_hcd *hcd = NULL;
+ struct max3421_hcd *max3421_hcd;
+ struct usb_hcd *hcd;
unsigned long flags;
- for (prev = &max3421_hcd_list; *prev; prev = &(*prev)->next) {
- max3421_hcd = *prev;
- hcd = max3421_to_hcd(max3421_hcd);
- if (hcd->self.controller == &spi->dev)
- break;
- }
- if (!max3421_hcd) {
- dev_err(&spi->dev, "no MAX3421 HCD found for SPI device %p\n",
- spi);
- return -ENODEV;
- }
+ max3421_hcd = spi_get_drvdata(spi);
+ hcd = max3421_to_hcd(max3421_hcd);
usb_remove_hcd(hcd);
spin_lock_irqsave(&max3421_hcd->lock, flags);
kthread_stop(max3421_hcd->spi_thread);
- *prev = max3421_hcd->next;
spin_unlock_irqrestore(&max3421_hcd->lock, flags);
On Wed, Nov 24, 2021 at 12:57:03PM +0100, Greg Kroah-Hartman wrote:
> From: Ziyang Xuan <[email protected]>
>
> [ Upstream commit 563bcbae3ba233c275c244bfce2efe12938f5363 ]
>
> The real_dev of a vlan net_device may be freed after
> unregister_vlan_dev(). Access the real_dev continually by
> vlan_dev_real_dev() will trigger the UAF problem for the
> real_dev like following:
>
> ==================================================================
> BUG: KASAN: use-after-free in vlan_dev_real_dev+0xf9/0x120
> Call Trace:
> kasan_report.cold+0x83/0xdf
> vlan_dev_real_dev+0xf9/0x120
> is_eth_port_of_netdev_filter.part.0+0xb1/0x2c0
> is_eth_port_of_netdev_filter+0x28/0x40
> ib_enum_roce_netdev+0x1a3/0x300
> ib_enum_all_roce_netdevs+0xc7/0x140
> netdevice_event_work_handler+0x9d/0x210
> ...
>
> Freed by task 9288:
> kasan_save_stack+0x1b/0x40
> kasan_set_track+0x1c/0x30
> kasan_set_free_info+0x20/0x30
> __kasan_slab_free+0xfc/0x130
> slab_free_freelist_hook+0xdd/0x240
> kfree+0xe4/0x690
> kvfree+0x42/0x50
> device_release+0x9f/0x240
> kobject_put+0x1c8/0x530
> put_device+0x1b/0x30
> free_netdev+0x370/0x540
> ppp_destroy_interface+0x313/0x3d0
> ...
>
> Move the put_device(real_dev) to vlan_dev_free(). Ensure
> real_dev not be freed before vlan_dev unregistered.
>
> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
> Reported-by: [email protected]
> Signed-off-by: Ziyang Xuan <[email protected]>
> Reviewed-by: Jason Gunthorpe <[email protected]>
> Signed-off-by: David S. Miller <[email protected]>
> Signed-off-by: Sasha Levin <[email protected]>
> ---
> net/8021q/vlan.c | 3 ---
> net/8021q/vlan_dev.c | 3 +++
> 2 files changed, 3 insertions(+), 3 deletions(-)
This patch is known to be broken, it should not be backported
Jason
On Wed, Nov 24, 2021 at 02:15:10PM +0100, Greg Kroah-Hartman wrote:
> On Wed, Nov 24, 2021 at 08:50:18AM -0400, Jason Gunthorpe wrote:
> > On Wed, Nov 24, 2021 at 12:57:03PM +0100, Greg Kroah-Hartman wrote:
> > > From: Ziyang Xuan <[email protected]>
> > >
> > > [ Upstream commit 563bcbae3ba233c275c244bfce2efe12938f5363 ]
> > >
> > > The real_dev of a vlan net_device may be freed after
> > > unregister_vlan_dev(). Access the real_dev continually by
> > > vlan_dev_real_dev() will trigger the UAF problem for the
> > > real_dev like following:
> > >
> > > ==================================================================
> > > BUG: KASAN: use-after-free in vlan_dev_real_dev+0xf9/0x120
> > > Call Trace:
> > > kasan_report.cold+0x83/0xdf
> > > vlan_dev_real_dev+0xf9/0x120
> > > is_eth_port_of_netdev_filter.part.0+0xb1/0x2c0
> > > is_eth_port_of_netdev_filter+0x28/0x40
> > > ib_enum_roce_netdev+0x1a3/0x300
> > > ib_enum_all_roce_netdevs+0xc7/0x140
> > > netdevice_event_work_handler+0x9d/0x210
> > > ...
> > >
> > > Freed by task 9288:
> > > kasan_save_stack+0x1b/0x40
> > > kasan_set_track+0x1c/0x30
> > > kasan_set_free_info+0x20/0x30
> > > __kasan_slab_free+0xfc/0x130
> > > slab_free_freelist_hook+0xdd/0x240
> > > kfree+0xe4/0x690
> > > kvfree+0x42/0x50
> > > device_release+0x9f/0x240
> > > kobject_put+0x1c8/0x530
> > > put_device+0x1b/0x30
> > > free_netdev+0x370/0x540
> > > ppp_destroy_interface+0x313/0x3d0
> > > ...
> > >
> > > Move the put_device(real_dev) to vlan_dev_free(). Ensure
> > > real_dev not be freed before vlan_dev unregistered.
> > >
> > > Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
> > > Reported-by: [email protected]
> > > Signed-off-by: Ziyang Xuan <[email protected]>
> > > Reviewed-by: Jason Gunthorpe <[email protected]>
> > > Signed-off-by: David S. Miller <[email protected]>
> > > Signed-off-by: Sasha Levin <[email protected]>
> > > net/8021q/vlan.c | 3 ---
> > > net/8021q/vlan_dev.c | 3 +++
> > > 2 files changed, 3 insertions(+), 3 deletions(-)
> >
> > This patch is known to be broken, it should not be backported
>
> It is already in a bunch of branches :(
>
> What is the upstream revert of this commit in Linus's tree?
It isn't in a Linus released kernel yet, Ziyang and Petr are working
on fixing it.
Jason
On Wed, Nov 24, 2021 at 08:50:18AM -0400, Jason Gunthorpe wrote:
> On Wed, Nov 24, 2021 at 12:57:03PM +0100, Greg Kroah-Hartman wrote:
> > From: Ziyang Xuan <[email protected]>
> >
> > [ Upstream commit 563bcbae3ba233c275c244bfce2efe12938f5363 ]
> >
> > The real_dev of a vlan net_device may be freed after
> > unregister_vlan_dev(). Access the real_dev continually by
> > vlan_dev_real_dev() will trigger the UAF problem for the
> > real_dev like following:
> >
> > ==================================================================
> > BUG: KASAN: use-after-free in vlan_dev_real_dev+0xf9/0x120
> > Call Trace:
> > kasan_report.cold+0x83/0xdf
> > vlan_dev_real_dev+0xf9/0x120
> > is_eth_port_of_netdev_filter.part.0+0xb1/0x2c0
> > is_eth_port_of_netdev_filter+0x28/0x40
> > ib_enum_roce_netdev+0x1a3/0x300
> > ib_enum_all_roce_netdevs+0xc7/0x140
> > netdevice_event_work_handler+0x9d/0x210
> > ...
> >
> > Freed by task 9288:
> > kasan_save_stack+0x1b/0x40
> > kasan_set_track+0x1c/0x30
> > kasan_set_free_info+0x20/0x30
> > __kasan_slab_free+0xfc/0x130
> > slab_free_freelist_hook+0xdd/0x240
> > kfree+0xe4/0x690
> > kvfree+0x42/0x50
> > device_release+0x9f/0x240
> > kobject_put+0x1c8/0x530
> > put_device+0x1b/0x30
> > free_netdev+0x370/0x540
> > ppp_destroy_interface+0x313/0x3d0
> > ...
> >
> > Move the put_device(real_dev) to vlan_dev_free(). Ensure
> > real_dev not be freed before vlan_dev unregistered.
> >
> > Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
> > Reported-by: [email protected]
> > Signed-off-by: Ziyang Xuan <[email protected]>
> > Reviewed-by: Jason Gunthorpe <[email protected]>
> > Signed-off-by: David S. Miller <[email protected]>
> > Signed-off-by: Sasha Levin <[email protected]>
> > ---
> > net/8021q/vlan.c | 3 ---
> > net/8021q/vlan_dev.c | 3 +++
> > 2 files changed, 3 insertions(+), 3 deletions(-)
>
> This patch is known to be broken, it should not be backported
It is already in a bunch of branches :(
What is the upstream revert of this commit in Linus's tree?
thanks,
greg k-h
On Wed, Nov 24, 2021 at 09:27:56AM -0400, Jason Gunthorpe wrote:
> On Wed, Nov 24, 2021 at 02:15:10PM +0100, Greg Kroah-Hartman wrote:
> > On Wed, Nov 24, 2021 at 08:50:18AM -0400, Jason Gunthorpe wrote:
> > > On Wed, Nov 24, 2021 at 12:57:03PM +0100, Greg Kroah-Hartman wrote:
> > > > From: Ziyang Xuan <[email protected]>
> > > >
> > > > [ Upstream commit 563bcbae3ba233c275c244bfce2efe12938f5363 ]
> > > >
> > > > The real_dev of a vlan net_device may be freed after
> > > > unregister_vlan_dev(). Access the real_dev continually by
> > > > vlan_dev_real_dev() will trigger the UAF problem for the
> > > > real_dev like following:
> > > >
> > > > ==================================================================
> > > > BUG: KASAN: use-after-free in vlan_dev_real_dev+0xf9/0x120
> > > > Call Trace:
> > > > kasan_report.cold+0x83/0xdf
> > > > vlan_dev_real_dev+0xf9/0x120
> > > > is_eth_port_of_netdev_filter.part.0+0xb1/0x2c0
> > > > is_eth_port_of_netdev_filter+0x28/0x40
> > > > ib_enum_roce_netdev+0x1a3/0x300
> > > > ib_enum_all_roce_netdevs+0xc7/0x140
> > > > netdevice_event_work_handler+0x9d/0x210
> > > > ...
> > > >
> > > > Freed by task 9288:
> > > > kasan_save_stack+0x1b/0x40
> > > > kasan_set_track+0x1c/0x30
> > > > kasan_set_free_info+0x20/0x30
> > > > __kasan_slab_free+0xfc/0x130
> > > > slab_free_freelist_hook+0xdd/0x240
> > > > kfree+0xe4/0x690
> > > > kvfree+0x42/0x50
> > > > device_release+0x9f/0x240
> > > > kobject_put+0x1c8/0x530
> > > > put_device+0x1b/0x30
> > > > free_netdev+0x370/0x540
> > > > ppp_destroy_interface+0x313/0x3d0
> > > > ...
> > > >
> > > > Move the put_device(real_dev) to vlan_dev_free(). Ensure
> > > > real_dev not be freed before vlan_dev unregistered.
> > > >
> > > > Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
> > > > Reported-by: [email protected]
> > > > Signed-off-by: Ziyang Xuan <[email protected]>
> > > > Reviewed-by: Jason Gunthorpe <[email protected]>
> > > > Signed-off-by: David S. Miller <[email protected]>
> > > > Signed-off-by: Sasha Levin <[email protected]>
> > > > net/8021q/vlan.c | 3 ---
> > > > net/8021q/vlan_dev.c | 3 +++
> > > > 2 files changed, 3 insertions(+), 3 deletions(-)
> > >
> > > This patch is known to be broken, it should not be backported
> >
> > It is already in a bunch of branches :(
> >
> > What is the upstream revert of this commit in Linus's tree?
>
> It isn't in a Linus released kernel yet, Ziyang and Petr are working
> on fixing it.
Ok, dropping it from the 4.14 and 4.19 queues now, hopefully it gets
fixed in Linus's tree soon.
thanks,
greg k-h
On Wed, Nov 24, 2021 at 12:54:02PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.256 release.
> There are 251 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri, 26 Nov 2021 11:56:36 +0000.
> Anything received after that time might be too late.
>
Building s390:defconfig ... failed
--------------
Error log:
mm/hugetlb.c: In function '__unmap_hugepage_range':
mm/hugetlb.c:3411:4: error: implicit declaration of function 'tlb_flush_pmd_range'
The problem also affects 'sh' builds, and possibly others.
Guenter
On Wed, Nov 24, 2021 at 12:54:02PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.256 release.
> There are 251 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri, 26 Nov 2021 11:56:36 +0000.
> Anything received after that time might be too late.
>
Build results:
total: 168 pass: 161 fail: 7
Failed builds:
ia64:defconfig
s390:defconfig
s390:allmodconfig
s390:performance_defconfig
sh:dreamcast_defconfig
sh:microdev_defconfig
sh:shx3_defconfig
Qemu test results:
total: 423 pass: 418 fail: 5
Failed tests:
s390:defconfig:nolocktests:smp2:net,default:initrd
s390:defconfig:nolocktests:smp2:virtio-blk-ccw:net,virtio-net-pci:rootfs
s390:defconfig:nolocktests:smp2:scsi[virtio-ccw]:net,default:rootfs
s390:defconfig:nolocktests:virtio-pci:net,virtio-net-pci:rootfs
s390:defconfig:nolocktests:scsi[virtio-pci]:net,default:rootfs
mm/hugetlb.c: In function '__unmap_hugepage_range':
mm/hugetlb.c:3411:25: error: implicit declaration of function 'tlb_flush_pmd_range'
Guenter
On Wed, 24 Nov 2021 at 17:51, Greg Kroah-Hartman
<[email protected]> wrote:
>
> This is the start of the stable review cycle for the 4.14.256 release.
> There are 251 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri, 26 Nov 2021 11:56:36 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.256-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
FYI,
New warnings on Linux 4.14.256-rc1 on arm and arm64 (defconfig+7) with gcc-11.
drivers/soc/tegra/pmc.c: In function 'tegra_powergate_power_up':
drivers/soc/tegra/pmc.c:423:1: warning: label 'powergate_off' defined
but not used [-Wunused-label]
423 | powergate_off:
| ^~~~~~~~~~~~~
Reported-by: Linux Kernel Functional Testing <[email protected]>
--
Linaro LKFT
https://lkft.linaro.org
On Thu, Nov 25, 2021 at 09:11:53AM +0530, Naresh Kamboju wrote:
> On Wed, 24 Nov 2021 at 17:51, Greg Kroah-Hartman
> <[email protected]> wrote:
> >
> > This is the start of the stable review cycle for the 4.14.256 release.
> > There are 251 patches in this series, all will be posted as a response
> > to this one. If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Fri, 26 Nov 2021 11:56:36 +0000.
> > Anything received after that time might be too late.
> >
> > The whole patch series can be found in one patch at:
> > https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.256-rc1.gz
> > or in the git tree and branch at:
> > git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> > and the diffstat can be found below.
> >
> > thanks,
> >
> > greg k-h
>
>
> FYI,
> New warnings on Linux 4.14.256-rc1 on arm and arm64 (defconfig+7) with gcc-11.
>
> drivers/soc/tegra/pmc.c: In function 'tegra_powergate_power_up':
> drivers/soc/tegra/pmc.c:423:1: warning: label 'powergate_off' defined
> but not used [-Wunused-label]
> 423 | powergate_off:
> | ^~~~~~~~~~~~~
>
>
> Reported-by: Linux Kernel Functional Testing <[email protected]>
Now fixed, thanks.
greg k-h
On Wed, Nov 24, 2021 at 05:38:50PM -0800, Guenter Roeck wrote:
> On Wed, Nov 24, 2021 at 12:54:02PM +0100, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 4.14.256 release.
> > There are 251 patches in this series, all will be posted as a response
> > to this one. If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Fri, 26 Nov 2021 11:56:36 +0000.
> > Anything received after that time might be too late.
> >
>
> Build results:
> total: 168 pass: 161 fail: 7
> Failed builds:
> ia64:defconfig
> s390:defconfig
> s390:allmodconfig
> s390:performance_defconfig
> sh:dreamcast_defconfig
> sh:microdev_defconfig
> sh:shx3_defconfig
> Qemu test results:
> total: 423 pass: 418 fail: 5
> Failed tests:
> s390:defconfig:nolocktests:smp2:net,default:initrd
> s390:defconfig:nolocktests:smp2:virtio-blk-ccw:net,virtio-net-pci:rootfs
> s390:defconfig:nolocktests:smp2:scsi[virtio-ccw]:net,default:rootfs
> s390:defconfig:nolocktests:virtio-pci:net,virtio-net-pci:rootfs
> s390:defconfig:nolocktests:scsi[virtio-pci]:net,default:rootfs
>
> mm/hugetlb.c: In function '__unmap_hugepage_range':
> mm/hugetlb.c:3411:25: error: implicit declaration of function 'tlb_flush_pmd_range'
Should be fixed in -rc1.
thanks,
greg k-h
On Thu, Nov 25, 2021 at 01:55:12PM +0100, Greg Kroah-Hartman wrote:
> On Wed, Nov 24, 2021 at 05:38:50PM -0800, Guenter Roeck wrote:
> > On Wed, Nov 24, 2021 at 12:54:02PM +0100, Greg Kroah-Hartman wrote:
> > > This is the start of the stable review cycle for the 4.14.256 release.
> > > There are 251 patches in this series, all will be posted as a response
> > > to this one. If anyone has any issues with these being applied, please
> > > let me know.
> > >
> > > Responses should be made by Fri, 26 Nov 2021 11:56:36 +0000.
> > > Anything received after that time might be too late.
> > >
> >
> > Build results:
> > total: 168 pass: 161 fail: 7
> > Failed builds:
> > ia64:defconfig
> > s390:defconfig
> > s390:allmodconfig
> > s390:performance_defconfig
> > sh:dreamcast_defconfig
> > sh:microdev_defconfig
> > sh:shx3_defconfig
> > Qemu test results:
> > total: 423 pass: 418 fail: 5
> > Failed tests:
> > s390:defconfig:nolocktests:smp2:net,default:initrd
> > s390:defconfig:nolocktests:smp2:virtio-blk-ccw:net,virtio-net-pci:rootfs
> > s390:defconfig:nolocktests:smp2:scsi[virtio-ccw]:net,default:rootfs
> > s390:defconfig:nolocktests:virtio-pci:net,virtio-net-pci:rootfs
> > s390:defconfig:nolocktests:scsi[virtio-pci]:net,default:rootfs
> >
> > mm/hugetlb.c: In function '__unmap_hugepage_range':
> > mm/hugetlb.c:3411:25: error: implicit declaration of function 'tlb_flush_pmd_range'
>
> Should be fixed in -rc1.
{sigh} -rc2 I mean.
thanks,
greg k-h