The struct tc_mqprio_qopt_offload is a container for struct tc_mqprio_qopt,
that allows passing extra parameters, such as traffic shaping. This commit
converts the current mqprio code to that new struct.
Signed-off-by: Maxime Chevallier <[email protected]>
---
drivers/net/ethernet/marvell/mvneta.c | 17 ++++++++++-------
1 file changed, 10 insertions(+), 7 deletions(-)
diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index 80e4b500695e..46b7604805f7 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -38,6 +38,7 @@
#include <net/ipv6.h>
#include <net/tso.h>
#include <net/page_pool.h>
+#include <net/pkt_cls.h>
#include <linux/bpf_trace.h>
/* Registers */
@@ -4908,14 +4909,14 @@ static void mvneta_setup_rx_prio_map(struct mvneta_port *pp)
}
static int mvneta_setup_mqprio(struct net_device *dev,
- struct tc_mqprio_qopt *qopt)
+ struct tc_mqprio_qopt_offload *mqprio)
{
struct mvneta_port *pp = netdev_priv(dev);
u8 num_tc;
int i;
- qopt->hw = TC_MQPRIO_HW_OFFLOAD_TCS;
- num_tc = qopt->num_tc;
+ mqprio->qopt.hw = TC_MQPRIO_HW_OFFLOAD_TCS;
+ num_tc = mqprio->qopt.num_tc;
if (num_tc > rxq_number)
return -EINVAL;
@@ -4926,13 +4927,15 @@ static int mvneta_setup_mqprio(struct net_device *dev,
return 0;
}
- memcpy(pp->prio_tc_map, qopt->prio_tc_map, sizeof(pp->prio_tc_map));
+ memcpy(pp->prio_tc_map, mqprio->qopt.prio_tc_map,
+ sizeof(pp->prio_tc_map));
mvneta_setup_rx_prio_map(pp);
- netdev_set_num_tc(dev, qopt->num_tc);
- for (i = 0; i < qopt->num_tc; i++)
- netdev_set_tc_queue(dev, i, qopt->count[i], qopt->offset[i]);
+ netdev_set_num_tc(dev, mqprio->qopt.num_tc);
+ for (i = 0; i < mqprio->qopt.num_tc; i++)
+ netdev_set_tc_queue(dev, i, mqprio->qopt.count[i],
+ mqprio->qopt.offset[i]);
return 0;
}
--
2.25.4