Hi All,
This patch series aims to drop using platform_get_resource() for IRQ types
in preparation for removal of static setup of IRQ resource from DT core
code.
Dropping usage of platform_get_resource() was agreed based on
the discussion [0].
[0] https://patchwork.kernel.org/project/linux-renesas-soc/
patch/[email protected]/
Cheers,
Prabhakar
Lad Prabhakar (2):
ASoC: xlnx: Use platform_get_irq() to get the interrupt
ASoC: bcm: Use platform_get_irq() to get the interrupt
sound/soc/bcm/bcm63xx-i2s.h | 1 -
sound/soc/bcm/bcm63xx-pcm-whistler.c | 13 ++++++-------
sound/soc/xilinx/xlnx_spdif.c | 10 +++-------
3 files changed, 9 insertions(+), 15 deletions(-)
--
2.17.1
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypasses the hierarchical setup and messes up the
irq chaining.
In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq().
Signed-off-by: Lad Prabhakar <[email protected]>
---
v1->v2
* No change
---
sound/soc/xilinx/xlnx_spdif.c | 10 +++-------
1 file changed, 3 insertions(+), 7 deletions(-)
diff --git a/sound/soc/xilinx/xlnx_spdif.c b/sound/soc/xilinx/xlnx_spdif.c
index e2ca087adee6..cba0e868a7d7 100644
--- a/sound/soc/xilinx/xlnx_spdif.c
+++ b/sound/soc/xilinx/xlnx_spdif.c
@@ -237,7 +237,6 @@ MODULE_DEVICE_TABLE(of, xlnx_spdif_of_match);
static int xlnx_spdif_probe(struct platform_device *pdev)
{
int ret;
- struct resource *res;
struct snd_soc_dai_driver *dai_drv;
struct spdif_dev_data *ctx;
@@ -273,13 +272,10 @@ static int xlnx_spdif_probe(struct platform_device *pdev)
if (ctx->mode) {
dai_drv = &xlnx_spdif_tx_dai;
} else {
- res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
- if (!res) {
- dev_err(dev, "No IRQ resource found\n");
- ret = -ENODEV;
+ ret = platform_get_irq(pdev, 0);
+ if (ret < 0)
goto clk_err;
- }
- ret = devm_request_irq(dev, res->start,
+ ret = devm_request_irq(dev, ret,
xlnx_spdifrx_irq_handler,
0, "XLNX_SPDIF_RX", ctx);
if (ret) {
--
2.17.1
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypasses the hierarchical setup and messes up the
irq chaining.
In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq().
While at it also drop "r_irq" member from struct bcm_i2s_priv as there
are no users of it.
Signed-off-by: Lad Prabhakar <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
---
v1->v2
* Included RB tag from Florian
* Included irq.h to fix builds for x86
---
sound/soc/bcm/bcm63xx-i2s.h | 1 -
sound/soc/bcm/bcm63xx-pcm-whistler.c | 13 ++++++-------
2 files changed, 6 insertions(+), 8 deletions(-)
diff --git a/sound/soc/bcm/bcm63xx-i2s.h b/sound/soc/bcm/bcm63xx-i2s.h
index edc328ba53d3..f30556bec89e 100644
--- a/sound/soc/bcm/bcm63xx-i2s.h
+++ b/sound/soc/bcm/bcm63xx-i2s.h
@@ -74,7 +74,6 @@
struct bcm_i2s_priv {
struct device *dev;
- struct resource *r_irq;
struct regmap *regmap_i2s;
struct clk *i2s_clk;
struct snd_pcm_substream *play_substream;
diff --git a/sound/soc/bcm/bcm63xx-pcm-whistler.c b/sound/soc/bcm/bcm63xx-pcm-whistler.c
index b5096f64c576..2c600b017524 100644
--- a/sound/soc/bcm/bcm63xx-pcm-whistler.c
+++ b/sound/soc/bcm/bcm63xx-pcm-whistler.c
@@ -6,6 +6,7 @@
#include <linux/dma-mapping.h>
#include <linux/io.h>
+#include <linux/irq.h>
#include <linux/module.h>
#include <sound/pcm_params.h>
#include <linux/regmap.h>
@@ -387,14 +388,12 @@ int bcm63xx_soc_platform_probe(struct platform_device *pdev,
{
int ret;
- i2s_priv->r_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
- if (!i2s_priv->r_irq) {
- dev_err(&pdev->dev, "Unable to get register irq resource.\n");
- return -ENODEV;
- }
+ ret = platform_get_irq(pdev, 0);
+ if (ret < 0)
+ return ret;
- ret = devm_request_irq(&pdev->dev, i2s_priv->r_irq->start, i2s_dma_isr,
- i2s_priv->r_irq->flags, "i2s_dma", (void *)i2s_priv);
+ ret = devm_request_irq(&pdev->dev, ret, i2s_dma_isr,
+ irq_get_trigger_type(ret), "i2s_dma", (void *)i2s_priv);
if (ret) {
dev_err(&pdev->dev,
"i2s_init: failed to request interrupt.ret=%d\n", ret);
--
2.17.1
On Tue, 21 Dec 2021 17:00:58 +0000, Lad Prabhakar wrote:
> This patch series aims to drop using platform_get_resource() for IRQ types
> in preparation for removal of static setup of IRQ resource from DT core
> code.
>
> Dropping usage of platform_get_resource() was agreed based on
> the discussion [0].
>
> [...]
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next
Thanks!
[1/2] ASoC: xlnx: Use platform_get_irq() to get the interrupt
commit: c2efaf8f2d53ffa2ecc487e21c62d13bbb8d88c3
[2/2] ASoC: bcm: Use platform_get_irq() to get the interrupt
commit: 5de035c270047e7ae754fbfb69031707aa5b54f7
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark