Hi All,
This patch series aims to drop using platform_get_resource*() for IRQ
types in preparation for removal of static setup of IRQ resource from
DT core code.
Dropping usage of platform_get_resource*() was agreed based on
the discussion [0].
[0] https://patchwork.kernel.org/project/linux-renesas-soc/
patch/[email protected]/
Note: I have just build tested the patches.
Cheers,
Prabhakar
Lad Prabhakar (2):
mtd: rawnand: omap_elm: Use platform_get_irq() to get the interrupt
mtd: rawnand: gpmi: Use platform_get_irq_byname() to get the interrupt
drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c | 11 ++++-------
drivers/mtd/nand/raw/omap_elm.c | 16 +++++++---------
2 files changed, 11 insertions(+), 16 deletions(-)
--
2.17.1
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypasses the hierarchical setup and messes up the
irq chaining.
In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq().
Signed-off-by: Lad Prabhakar <[email protected]>
---
drivers/mtd/nand/raw/omap_elm.c | 16 +++++++---------
1 file changed, 7 insertions(+), 9 deletions(-)
diff --git a/drivers/mtd/nand/raw/omap_elm.c b/drivers/mtd/nand/raw/omap_elm.c
index 8bab753211e9..db105d9b560c 100644
--- a/drivers/mtd/nand/raw/omap_elm.c
+++ b/drivers/mtd/nand/raw/omap_elm.c
@@ -384,8 +384,8 @@ static irqreturn_t elm_isr(int this_irq, void *dev_id)
static int elm_probe(struct platform_device *pdev)
{
int ret = 0;
- struct resource *irq;
struct elm_info *info;
+ int irq;
info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
if (!info)
@@ -393,20 +393,18 @@ static int elm_probe(struct platform_device *pdev)
info->dev = &pdev->dev;
- irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
- if (!irq) {
- dev_err(&pdev->dev, "no irq resource defined\n");
- return -ENODEV;
- }
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return irq;
info->elm_base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(info->elm_base))
return PTR_ERR(info->elm_base);
- ret = devm_request_irq(&pdev->dev, irq->start, elm_isr, 0,
- pdev->name, info);
+ ret = devm_request_irq(&pdev->dev, irq, elm_isr, 0,
+ pdev->name, info);
if (ret) {
- dev_err(&pdev->dev, "failure requesting %pr\n", irq);
+ dev_err(&pdev->dev, "failure requesting %d\n", irq);
return ret;
}
--
2.17.1
platform_get_resource_byname(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypasses the hierarchical setup and messes up the
irq chaining.
In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq_byname().
Signed-off-by: Lad Prabhakar <[email protected]>
---
drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c | 11 ++++-------
1 file changed, 4 insertions(+), 7 deletions(-)
diff --git a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
index feccff8bdd15..1b64c5a5140d 100644
--- a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
@@ -991,16 +991,13 @@ static int acquire_bch_irq(struct gpmi_nand_data *this, irq_handler_t irq_h)
{
struct platform_device *pdev = this->pdev;
const char *res_name = GPMI_NAND_BCH_INTERRUPT_RES_NAME;
- struct resource *r;
int err;
- r = platform_get_resource_byname(pdev, IORESOURCE_IRQ, res_name);
- if (!r) {
- dev_err(this->dev, "Can't get resource for %s\n", res_name);
- return -ENODEV;
- }
+ err = platform_get_irq_byname(pdev, res_name);
+ if (err < 0)
+ return err;
- err = devm_request_irq(this->dev, r->start, irq_h, 0, res_name, this);
+ err = devm_request_irq(this->dev, err, irq_h, 0, res_name, this);
if (err)
dev_err(this->dev, "error requesting BCH IRQ\n");
--
2.17.1
On Tue, 2021-12-21 at 21:26:09 UTC, Lad Prabhakar wrote:
> platform_get_resource_byname(pdev, IORESOURCE_IRQ, ..) relies on static
> allocation of IRQ resources in DT core code, this causes an issue
> when using hierarchical interrupt domains using "interrupts" property
> in the node as this bypasses the hierarchical setup and messes up the
> irq chaining.
>
> In preparation for removal of static setup of IRQ resource from DT core
> code use platform_get_irq_byname().
>
> Signed-off-by: Lad Prabhakar <[email protected]>
Applied to https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git nand/next, thanks.
Miquel
On Tue, 2021-12-21 at 21:26:08 UTC, Lad Prabhakar wrote:
> platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
> allocation of IRQ resources in DT core code, this causes an issue
> when using hierarchical interrupt domains using "interrupts" property
> in the node as this bypasses the hierarchical setup and messes up the
> irq chaining.
>
> In preparation for removal of static setup of IRQ resource from DT core
> code use platform_get_irq().
>
> Signed-off-by: Lad Prabhakar <[email protected]>
Applied to https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git nand/next, thanks.
Miquel