This is the start of the stable review cycle for the 5.10.94 release.
There are 563 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Wed, 26 Jan 2022 18:39:11 +0000.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.94-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 5.10.94-rc1
Fabio Estevam <[email protected]>
ath10k: Fix the MTU size on QCA9377 SDIO
Doyle, Patrick <[email protected]>
mtd: nand: bbt: Fix corner case in bad block table handling
Andrey Konovalov <[email protected]>
lib/test_meminit: destroy cache in kmem_cache_alloc_bulk() test
Alistair Popple <[email protected]>
mm/hmm.c: allow VM_MIXEDMAP to work with hmm_range_fault
Miaoqian Lin <[email protected]>
lib82596: Fix IRQ check in sni_82596_probe
Matthias Schiffer <[email protected]>
scripts/dtc: dtx_diff: remove broken example from help text
Sam Protsenko <[email protected]>
dt-bindings: watchdog: Require samsung,syscon-phandle for Exynos7
Alexander Stein <[email protected]>
dt-bindings: display: meson-vpu: Add missing amlogic,canvas property
Alexander Stein <[email protected]>
dt-bindings: display: meson-dw-hdmi: add missing sound-name-prefix property
Tom Rix <[email protected]>
net: mscc: ocelot: fix using match before it is set
Russell King (Oracle) <[email protected]>
net: sfp: fix high power modules without diagnostic monitoring
Tom Rix <[email protected]>
net: ethernet: mtk_eth_soc: fix error checking in mtk_mac_config()
Sergey Shtylyov <[email protected]>
bcmgenet: add WOL IRQ check
Kevin Bracey <[email protected]>
net_sched: restore "mpu xxx" handling
Jie Wang <[email protected]>
net: bonding: fix bond_xmit_broadcast return value error bug
David Heidelberg <[email protected]>
arm64: dts: qcom: msm8996: drop not documented adreno properties
Leon Romanovsky <[email protected]>
devlink: Remove misleading internal_flags from health reporter dump
Zechuan Chen <[email protected]>
perf probe: Fix ppc64 'perf probe add events failed' case
Tudor Ambarus <[email protected]>
dmaengine: at_xdmac: Fix at_xdmac_lld struct definition
Tudor Ambarus <[email protected]>
dmaengine: at_xdmac: Fix lld view setting
Tudor Ambarus <[email protected]>
dmaengine: at_xdmac: Fix concurrency over xfers_list
Tudor Ambarus <[email protected]>
dmaengine: at_xdmac: Print debug message after realeasing the lock
Tudor Ambarus <[email protected]>
dmaengine: at_xdmac: Start transfer for cyclic channels in issue_pending
Tudor Ambarus <[email protected]>
dmaengine: at_xdmac: Don't start transactions at tx_submit level
Adrian Hunter <[email protected]>
perf script: Fix hex dump character output
Guillaume Nault <[email protected]>
libcxgb: Don't accidentally set RTO_ONLINK in cxgb_find_route()
Guillaume Nault <[email protected]>
gre: Don't accidentally set RTO_ONLINK in gre_fill_metadata_dst()
Guillaume Nault <[email protected]>
xfrm: Don't accidentally set RTO_ONLINK in decode_session4()
Eric Dumazet <[email protected]>
netns: add schedule point in ops_exit_list()
Eric Dumazet <[email protected]>
inet: frags: annotate races around fqdir->dead and fqdir->high_thresh
Eric W. Biederman <[email protected]>
taskstats: Cleanup the use of task->exit_code
Michael S. Tsirkin <[email protected]>
virtio_ring: mark ring unused on error
Eli Cohen <[email protected]>
vdpa/mlx5: Fix wrong configuration of virtio_version_1_0
Laurence de Bruxelles <[email protected]>
rtc: pxa: fix null pointer dereference
Dmitry Torokhov <[email protected]>
HID: vivaldi: fix handling devices not using numbered reports
Robert Hancock <[email protected]>
net: axienet: increase default TX ring size to 128
Robert Hancock <[email protected]>
net: axienet: fix for TX busy handling
Robert Hancock <[email protected]>
net: axienet: fix number of TX ring slots for available check
Robert Hancock <[email protected]>
net: axienet: Fix TX ring slot available check
Robert Hancock <[email protected]>
net: axienet: limit minimum TX ring size
Robert Hancock <[email protected]>
net: axienet: add missing memory barriers
Robert Hancock <[email protected]>
net: axienet: reset core on initialization prior to MDIO access
Robert Hancock <[email protected]>
net: axienet: Wait for PhyRstCmplt after core reset
Robert Hancock <[email protected]>
net: axienet: increase reset timeout
Wen Gu <[email protected]>
net/smc: Fix hung_task when removing SMC-R devices
Robert Hancock <[email protected]>
clk: si5341: Fix clock HW provider cleanup
Stephen Boyd <[email protected]>
clk: Emit a stern warning with writable debugfs enabled
Eric Dumazet <[email protected]>
af_unix: annote lockless accesses to unix_tot_inflight & gc_in_progress
Chao Yu <[email protected]>
f2fs: fix to reserve space for IO align feature
Hyeong-Jun Kim <[email protected]>
f2fs: compress: fix potential deadlock of compress file
Miaoqian Lin <[email protected]>
parisc: pdc_stable: Fix memory leak in pdcs_register_pathentries
Tobias Waldekranz <[email protected]>
net/fsl: xgmac_mdio: Fix incorrect iounmap when removing module
Tobias Waldekranz <[email protected]>
net/fsl: xgmac_mdio: Add workaround for erratum A-009885
Eric Dumazet <[email protected]>
ipv4: avoid quadratic behavior in netns dismantle
Eric Dumazet <[email protected]>
ipv4: update fib_info_cnt under spinlock protection
German Gomez <[email protected]>
perf evsel: Override attr->sample_period for non-libpfm4 events
Toke Høiland-Jørgensen <[email protected]>
xdp: check prog type before updating BPF link
Quentin Monnet <[email protected]>
bpftool: Remove inclusion of utilities.mak from Makefiles
Russell King <[email protected]>
arm64/bpf: Remove 128MB limit for BPF JIT programs
Ye Bin <[email protected]>
block: Fix fsync always failed if once failed
Tobias Waldekranz <[email protected]>
powerpc/fsl/dts: Enable WA for erratum A-009885 on fman3l MDIO buses
Anders Roxell <[email protected]>
powerpc/cell: Fix clang -Wimplicit-fallthrough warning
Moshe Shemesh <[email protected]>
Revert "net/mlx5: Add retry mechanism to the command entry index allocation"
Amelie Delaunay <[email protected]>
dmaengine: stm32-mdma: fix STM32_MDMA_CTBR_TSEL_MASK
Chengguang Xu <[email protected]>
RDMA/rxe: Fix a typo in opcode name
Yixing Liu <[email protected]>
RDMA/hns: Modify the mapping attribute of doorbell to device
Kunihiko Hayashi <[email protected]>
dmaengine: uniphier-xdmac: Fix type of address variables
Bart Van Assche <[email protected]>
scsi: core: Show SCMD_LAST in text form
Luiz Augusto von Dentz <[email protected]>
Bluetooth: hci_sync: Fix not setting adv set duration
Randy Dunlap <[email protected]>
Documentation: fix firewire.rst ABI file path error
Lukas Bulwahn <[email protected]>
Documentation: refer to config RANDOMIZE_BASE for kernel address-space randomization
Sakari Ailus <[email protected]>
Documentation: ACPI: Fix data node reference documentation
Daniel Thompson <[email protected]>
Documentation: dmaengine: Correctly describe dmatest with channel unset
Randy Dunlap <[email protected]>
media: correct MEDIA_TEST_SUPPORT help text
Maxime Ripard <[email protected]>
drm/vc4: hdmi: Make sure the device is powered with CEC
Suresh Udipi <[email protected]>
media: rcar-csi2: Optimize the selection PHTW register
Marc Kleine-Budde <[email protected]>
can: mcp251xfd: mcp251xfd_tef_obj_read(): fix typo in error message
Ben Hutchings <[email protected]>
firmware: Update Kconfig help text for Google firmware
Baruch Siach <[email protected]>
of: base: Improve argument length mismatch error
Christian König <[email protected]>
drm/radeon: fix error handling in radeon_driver_open_kms
Theodore Ts'o <[email protected]>
ext4: don't use the orphan list when migrating an inode
Ye Bin <[email protected]>
ext4: fix null-ptr-deref in '__ext4_journal_ensure_credits'
Sebastian Andrzej Siewior <[email protected]>
ext4: destroy ext4_fc_dentry_cachep kmemcache on module removal
Xin Yin <[email protected]>
ext4: fast commit may miss tracking unwritten range during ftruncate
Xin Yin <[email protected]>
ext4: use ext4_ext_remove_space() for fast commit replay delete range
Ye Bin <[email protected]>
ext4: Fix BUG_ON in ext4_bread when write quota data
Luís Henriques <[email protected]>
ext4: set csum seed in tmp inode while migrating to extents
Xin Yin <[email protected]>
ext4: fix fast commit may miss tracking range for FALLOC_FL_ZERO_RANGE
Harshad Shirwadkar <[email protected]>
ext4: initialize err_blk before calling __ext4_get_inode_loc
Chunguang Xu <[email protected]>
ext4: fix a possible ABBA deadlock due to busy PA
Jan Kara <[email protected]>
ext4: make sure quota gets properly shutdown on error
Jan Kara <[email protected]>
ext4: make sure to reset inode lockdep class when quota enabling fails
Filipe Manana <[email protected]>
btrfs: respect the max size in the header when activating swap file
Josef Bacik <[email protected]>
btrfs: check the root node for uptodate before returning it
Filipe Manana <[email protected]>
btrfs: fix deadlock between quota enable and other quota operations
Ghalem Boudour <[email protected]>
xfrm: fix policy lookup for ipv6 gre packets
Pali Rohár <[email protected]>
PCI: pci-bridge-emul: Set PCI_STATUS_CAP_LIST for PCIe device
Pali Rohár <[email protected]>
PCI: pci-bridge-emul: Correctly set PCIe capabilities
Pali Rohár <[email protected]>
PCI: pci-bridge-emul: Fix definitions of reserved bits
Pali Rohár <[email protected]>
PCI: pci-bridge-emul: Properly mark reserved PCIe bits in PCI config space
Pali Rohár <[email protected]>
PCI: pci-bridge-emul: Make expansion ROM Base Address register read-only
Lukas Wunner <[email protected]>
PCI: pciehp: Fix infinite loop in IRQ handler upon power fault
Hans de Goede <[email protected]>
PCI: pciehp: Use down_read/write_nested(reset_lock) to fix lockdep errors
Rob Herring <[email protected]>
PCI: xgene: Fix IB window setup
Nicholas Piggin <[email protected]>
powerpc/64s/radix: Fix huge vmap false positive
John David Anglin <[email protected]>
parisc: Fix lpa and lpa_user defines
Brian Norris <[email protected]>
drm/bridge: analogix_dp: Make PSR-exit block less
Ilia Mirkin <[email protected]>
drm/nouveau/kms/nv04: use vzalloc for nv04_display
Lucas Stach <[email protected]>
drm/etnaviv: limit submit sizes
Sakari Ailus <[email protected]>
device property: Fix fwnode_graph_devcon_match() fwnode leak
Alexander Gordeev <[email protected]>
s390/mm: fix 2KB pgtable release race
Ilan Peer <[email protected]>
iwlwifi: mvm: Increase the scan timeout guard to 30 seconds
Xiangyang Zhang <[email protected]>
tracing/kprobes: 'nmissed' not showed correctly for kretprobe
Andrey Ryabinin <[email protected]>
cputime, cpuacct: Include guest time in user time in cpuacct.stat
Lukas Wunner <[email protected]>
serial: Fix incorrect rs485 polarity on uart open
Xie Yongji <[email protected]>
fuse: Pass correct lend value to filemap_write_and_wait_range()
Oleksandr Andrushchenko <[email protected]>
xen/gntdev: fix unmap notification order
Kunihiko Hayashi <[email protected]>
spi: uniphier: Fix a bug that doesn't point to private data correctly
Patrick Williams <[email protected]>
tpm: fix NPE on probe for missing device
Petr Cvachoucek <[email protected]>
ubifs: Error path in ubifs_remount_rw() seems to wrongly free write buffers
Meng Li <[email protected]>
crypto: caam - replace this_cpu_ptr with raw_cpu_ptr
Marek Vasut <[email protected]>
crypto: stm32/crc32 - Fix kernel BUG triggered in probe()
Heiner Kallweit <[email protected]>
crypto: omap-aes - Fix broken pm_runtime_and_get() usage
Arnaud Pouliquen <[email protected]>
rpmsg: core: Clean up resources on announce_create failure.
Miaoqian Lin <[email protected]>
phy: mediatek: Fix missing check in mtk_mipi_tx_probe
Tzung-Bi Shih <[email protected]>
ASoC: mediatek: mt8183: fix device_node leak
Tzung-Bi Shih <[email protected]>
ASoC: mediatek: mt8173: fix device_node leak
Christoph Hellwig <[email protected]>
scsi: sr: Don't use GFP_DMA
Tianjia Zhang <[email protected]>
MIPS: Octeon: Fix build errors using clang
Lakshmi Sowjanya D <[email protected]>
i2c: designware-pci: Fix to change data types of hcnt and lcnt parameters
Marc Zyngier <[email protected]>
irqchip/gic-v4: Disable redistributors' view of the VPE table at boot time
Ye Guojin <[email protected]>
MIPS: OCTEON: add put_device() after of_find_device_by_node()
Jan Kara <[email protected]>
udf: Fix error handling in udf_new_inode()
Hari Bathini <[email protected]>
powerpc/fadump: Fix inaccurate CPU state info in vmcore generated with panic
Hari Bathini <[email protected]>
powerpc: handle kdump appropriately with crash_kexec_post_notifiers option
Thadeu Lima de Souza Cascardo <[email protected]>
selftests/powerpc/spectre_v2: Return skip code when miss_percent is high
Christophe Leroy <[email protected]>
powerpc/40x: Map 32Mbytes of memory at startup
Nathan Chancellor <[email protected]>
MIPS: Loongson64: Use three arguments for slti
Takashi Iwai <[email protected]>
ALSA: seq: Set upper limit of processed events
James Smart <[email protected]>
scsi: lpfc: Trigger SLI4 firmware dump before doing driver cleanup
Christoph Hellwig <[email protected]>
dm: fix alloc_dax error handling in alloc_dev
Srinivas Kandagatla <[email protected]>
nvmem: core: set size for sysfs bin file
Christophe Leroy <[email protected]>
w1: Misuse of get_user()/put_user() reported by sparse
Alexey Kardashevskiy <[email protected]>
KVM: PPC: Book3S: Suppress failed alloc warning in H_COPY_TOFROM_GUEST
Alexey Kardashevskiy <[email protected]>
KVM: PPC: Book3S: Suppress warnings when allocating too big memory slots
Christophe Leroy <[email protected]>
powerpc/powermac: Add missing lockdep_register_key()
Martin Blumenstingl <[email protected]>
clk: meson: gxbb: Fix the SDM_EN bit for MPLL0 on GXBB
Joakim Tjernlund <[email protected]>
i2c: mpc: Correct I2C reset procedure
Michael Ellerman <[email protected]>
powerpc/smp: Move setup_profiling_timer() under CONFIG_PROFILING
Heiner Kallweit <[email protected]>
i2c: i801: Don't silently correct invalid transfer size
Nicholas Piggin <[email protected]>
powerpc/watchdog: Fix missed watchdog reset due to memory ordering race
Julia Lawall <[email protected]>
powerpc/btext: add missing of_node_put
Julia Lawall <[email protected]>
powerpc/cell: add missing of_node_put
Julia Lawall <[email protected]>
powerpc/powernv: add missing of_node_put
Julia Lawall <[email protected]>
powerpc/6xx: add missing of_node_put
Ingo Molnar <[email protected]>
x86/kbuild: Enable CONFIG_KALLSYMS_ALL=y in the defconfigs
Mauro Carvalho Chehab <[email protected]>
scripts: sphinx-pre-install: Fix ctex support on Debian
John David Anglin <[email protected]>
parisc: Avoid calling faulthandler_disabled() twice
Jason A. Donenfeld <[email protected]>
random: do not throw away excess input to crng_fast_load
Lukas Wunner <[email protected]>
serial: core: Keep mctrl register state and cached copy in sync
Lukas Wunner <[email protected]>
serial: pl010: Drop CR register reset on set_termios
Konrad Dybcio <[email protected]>
regulator: qcom_smd: Align probe function with rpmh-regulator
Russell King (Oracle) <[email protected]>
net: gemini: allow any RGMII interface mode
Russell King (Oracle) <[email protected]>
net: phy: marvell: configure RGMII delays for 88E1118
Danielle Ratson <[email protected]>
mlxsw: pci: Avoid flow control for EMAD packets
Joe Thornber <[email protected]>
dm space map common: add bounds check to sm_ll_lookup_bitmap()
Joe Thornber <[email protected]>
dm btree: add a defensive bounds check to insert_at()
Ping-Ke Shih <[email protected]>
mac80211: allow non-standard VHT MCS-10/11
Florian Fainelli <[email protected]>
net: mdio: Demote probed message to debug print
Josef Bacik <[email protected]>
btrfs: remove BUG_ON(!eie) in find_parent_nodes
Josef Bacik <[email protected]>
btrfs: remove BUG_ON() in find_parent_nodes()
Thomas Weißschuh <[email protected]>
ACPI: battery: Add the ThinkPad "Not Charging" quirk
Marina Nikolic <[email protected]>
amdgpu/pm: Make sysfs pm attributes as read-only for VFs
Zongmin Zhou <[email protected]>
drm/amdgpu: fixup bad vram size on gmc v8
Kirill A. Shutemov <[email protected]>
ACPICA: Hardware: Do not flush CPU cache when entering S4 and S5
Sudeep Holla <[email protected]>
ACPICA: Fix wrong interpretation of PCC address
Rafael J. Wysocki <[email protected]>
ACPICA: Executer: Fix the REFCLASS_REFOF case in acpi_ex_opcode_1A_0T_1R()
Rafael J. Wysocki <[email protected]>
ACPICA: Utilities: Avoid deleting the same object twice in a row
Mark Langsdorf <[email protected]>
ACPICA: actypes.h: Expand the ACPI_ACCESS_ definitions
Kyeong Yoo <[email protected]>
jffs2: GC deadlock reading a page that is used in jffs2_write_begin()
Lucas Stach <[email protected]>
drm/etnaviv: consider completed fence seqno in hang check
Antony Antony <[email protected]>
xfrm: rate limit SA mapping change message to user space
Luiz Augusto von Dentz <[email protected]>
Bluetooth: vhci: Set HCI_QUIRK_VALID_LE_STATES
Ben Greear <[email protected]>
ath11k: Fix napi related hang
Randy Dunlap <[email protected]>
um: registers: Rename function names to avoid conflicts and build problems
Luca Coelho <[email protected]>
iwlwifi: pcie: make sure prph_info is set when treating wakeup IRQ
Ilan Peer <[email protected]>
iwlwifi: mvm: Fix calculation of frame length
Johannes Berg <[email protected]>
iwlwifi: remove module loading failure message
Johannes Berg <[email protected]>
iwlwifi: fix leaks/bad data after failed firmware load
Changcheng Deng <[email protected]>
PM: AVS: qcom-cpr: Use div64_ul instead of do_div
Po-Hao Huang <[email protected]>
rtw88: 8822c: update rx settings to prevent potential hw deadlock
Zekun Shen <[email protected]>
ath9k: Fix out-of-bound memcpy in ath9k_hif_usb_rx_stream
Kai-Heng Feng <[email protected]>
usb: hub: Add delay for SuperSpeed hub resume to let links transit to U0
Rafael J. Wysocki <[email protected]>
cpufreq: Fix initialization of min and max frequency QoS requests
Rafael J. Wysocki <[email protected]>
PM: runtime: Add safety net to supplier device release
Thierry Reding <[email protected]>
arm64: tegra: Adjust length of CCPLEX cluster MMIO region
Biwen Li <[email protected]>
arm64: dts: ls1028a-qds: move rtc node to the correct i2c bus
Paul Moore <[email protected]>
audit: ensure userspace is penalized the same as the kernel when under pressure
Ulf Hansson <[email protected]>
mmc: core: Fixup storing of OCR for MMC_QUIRK_NONSTD_SDIO
Zhou Qingyang <[email protected]>
media: saa7146: hexium_gemini: Fix a NULL pointer dereference in hexium_attach()
Sean Young <[email protected]>
media: igorplugusb: receiver overflow should be reported
Alistair Francis <[email protected]>
HID: quirks: Allow inverting the absolute X/Y values
Paolo Abeni <[email protected]>
bpf: Do not WARN in bpf_warn_invalid_xdp_action()
Suresh Kumar <[email protected]>
net: bonding: debug: avoid printing debug logs when bond is not notifying peers
Borislav Petkov <[email protected]>
x86/mce: Mark mce_read_aux() noinstr
Borislav Petkov <[email protected]>
x86/mce: Mark mce_end() noinstr
Borislav Petkov <[email protected]>
x86/mce: Mark mce_panic() noinstr
Borislav Petkov <[email protected]>
x86/mce: Allow instrumentation during task work queueing
Baochen Qiang <[email protected]>
ath11k: Avoid false DEADLOCK warning reported by lockdep
Heiko Carstens <[email protected]>
selftests/ftrace: make kprobe profile testcase description unique
Iwona Winiarska <[email protected]>
gpio: aspeed: Convert aspeed_gpio.lock to raw_spinlock
Russell King (Oracle) <[email protected]>
net: phy: prefer 1000baseT over 1000baseKX
Antoine Tenart <[email protected]>
net-sysfs: update the queue counts in the unregistration path
Sebastian Gottschall <[email protected]>
ath10k: Fix tx hanging
Wen Gong <[email protected]>
ath11k: avoid deadlock by change ieee80211_queue_work for regd_update_work
Shaul Triebitz <[email protected]>
iwlwifi: mvm: avoid clearing a just saved session protection id
Johannes Berg <[email protected]>
iwlwifi: mvm: synchronize with FW after multicast commands
Mika Westerberg <[email protected]>
thunderbolt: Runtime PM activate both ends of the device link
Mauro Carvalho Chehab <[email protected]>
media: m920x: don't use stack on USB reads
Zhou Qingyang <[email protected]>
media: saa7146: hexium_orion: Fix a NULL pointer dereference in hexium_attach()
Niklas Söderlund <[email protected]>
media: rcar-vin: Update format alignment constraints
James Hilliard <[email protected]>
media: uvcvideo: Increase UVC_CTRL_CONTROL_TIMEOUT to 5 seconds.
Laurent Pinchart <[email protected]>
drm: rcar-du: Fix CRTC timings when CMM is used
Joerg Roedel <[email protected]>
x86/mm: Flush global TLB when switching to trampoline page-table
Xiongwei Song <[email protected]>
floppy: Add max size check for user space request
Neal Liu <[email protected]>
usb: uhci: add aspeed ast2600 uhci support
Kishon Vijay Abraham I <[email protected]>
arm64: dts: ti: j7200-main: Fix 'dtbs_check' serdes_ln_ctrl node
Hans de Goede <[email protected]>
ACPI / x86: Add not-present quirk for the PCI0.SDHB.BRC1 device on the GPD win
Hans de Goede <[email protected]>
ACPI / x86: Allow specifying acpi_device_override_status() quirks by path
Hans de Goede <[email protected]>
ACPI: Change acpi_device_always_present() into acpi_device_override_status()
Hans de Goede <[email protected]>
ACPI / x86: Drop PWM2 device on Lenovo Yoga Book from always present table
Mansur Alisha Shaik <[email protected]>
media: venus: avoid calling core_clk_setrate() concurrently during concurrent video sessions
Sriram R <[email protected]>
ath11k: Avoid NULL ptr access during mgmt tx cleanup
Zekun Shen <[email protected]>
rsi: Fix out-of-bounds read in rsi_read_pkt()
Zekun Shen <[email protected]>
rsi: Fix use-after-free in rsi_rx_done_handler()
Zekun Shen <[email protected]>
mwifiex: Fix skb_over_panic in mwifiex_usb_recv()
Stephan Müller <[email protected]>
crypto: jitter - consider 32 LSB for APT
Chengfeng Ye <[email protected]>
HSI: core: Fix return freed object in hsi_new_client
Hans de Goede <[email protected]>
gpiolib: acpi: Do not set the IRQ type if the IRQ is already in use
Fugang Duan <[email protected]>
tty: serial: imx: disable UCR4_OREN in .stop_rx() instead of .shutdown()
Martyn Welch <[email protected]>
drm/bridge: megachips: Ensure both bridges are probed before registration
Danielle Ratson <[email protected]>
mlxsw: pci: Add shutdown method in PCI driver
Jan Kiszka <[email protected]>
soc: ti: pruss: fix referenced node in error message
Alex Deucher <[email protected]>
drm/amdgpu/display: set vblank_disable_immediate for DC
Yang Li <[email protected]>
drm/amd/display: check top_pipe_to_program pointer
Lukas Bulwahn <[email protected]>
ARM: imx: rename DEBUG_IMX21_IMX27_UART to DEBUG_IMX27_UART
Dinh Nguyen <[email protected]>
EDAC/synopsys: Use the quirk for version instead of ddr version
Zheyu Ma <[email protected]>
media: b2c2: Add missing check in flexcop_pci_isr:
José Expósito <[email protected]>
HID: apple: Do not reset quirks when the Fn key is not found
Hans de Goede <[email protected]>
drm: panel-orientation-quirks: Add quirk for the Lenovo Yoga Book X91F/L
Pavankumar Kondeti <[email protected]>
usb: gadget: f_fs: Use stream_open() for endpoint files
Baochen Qiang <[email protected]>
ath11k: Fix crash caused by uninitialized TX ring
Mauro Carvalho Chehab <[email protected]>
media: atomisp: handle errors at sh_css_create_isp_params()
Linus Lüssing <[email protected]>
batman-adv: allow netlink usage in unprivileged containers
Wan Jiabing <[email protected]>
ARM: shmobile: rcar-gen2: Add missing of_node_put()
Hans de Goede <[email protected]>
media: atomisp-ov2680: Fix ov2680_set_fmt() clobbering the exposure
Mauro Carvalho Chehab <[email protected]>
media: atomisp: set per-device's default mode
Mauro Carvalho Chehab <[email protected]>
media: atomisp: fix try_fmt logic
Ben Skeggs <[email protected]>
drm/nouveau/pmu/gm200-: avoid touching PMU outside of DEVINIT/PREOS/ACR
Neil Armstrong <[email protected]>
drm/bridge: dw-hdmi: handle ELD when DRM_BRIDGE_ATTACH_NO_CONNECTOR
Zekun Shen <[email protected]>
ar5523: Fix null-ptr-deref with unexpected WDCMSG_TARGET_START reply
Andrii Nakryiko <[email protected]>
selftests/bpf: Fix bpf_object leak in skb_ctx selftest
Qiang Yu <[email protected]>
drm/lima: fix warning when CONFIG_DEBUG_SG=y & CONFIG_DMA_API_DEBUG=y
Andrii Nakryiko <[email protected]>
libbpf: Validate that .BTF and .BTF.ext sections contain data
Alexander Aring <[email protected]>
fs: dlm: filter user dlm messages for kernel locks
Wei Yongjun <[email protected]>
Bluetooth: Fix debugfs entry leak in hci_register_dev()
Sicelo A. Mhlongo <[email protected]>
ARM: dts: omap3-n900: Fix lp5523 for multi color
Baruch Siach <[email protected]>
of: base: Fix phandle argument length mismatch error message
Conor Dooley <[email protected]>
clk: bm1880: remove kfrees on static allocations
Shengjiu Wang <[email protected]>
ASoC: fsl_asrc: refine the check of available clock divider
Kamal Heib <[email protected]>
RDMA/cxgb4: Set queue pair state when being queried
Alyssa Ross <[email protected]>
ASoC: fsl_mqs: fix MODULE_ALIAS
Ammar Faizi <[email protected]>
powerpc/xive: Add missing null check after calling kmalloc
Randy Dunlap <[email protected]>
mips: bcm63xx: add support for clk_set_parent()
Randy Dunlap <[email protected]>
mips: lantiq: add support for clk_set_parent()
Sameer Pujar <[email protected]>
arm64: tegra: Remove non existent Tegra194 reset
Sameer Pujar <[email protected]>
arm64: tegra: Fix Tegra194 HDA {clock,reset}-names ordering
Fabrice Gasnier <[email protected]>
counter: stm32-lptimer-cnt: remove iio counter abi
Wei Yongjun <[email protected]>
misc: lattice-ecp3-config: Fix task hung when firmware load failed
Jiasheng Jiang <[email protected]>
ASoC: samsung: idma: Check of ioremap return value
Jiasheng Jiang <[email protected]>
ASoC: mediatek: Check for error clk pointer
Ryuta NAKANISHI <[email protected]>
phy: uniphier-usb3ss: fix unintended writing zeros to PHY register
Alan Stern <[email protected]>
scsi: block: pm: Always set request queue runtime active in blk_post_runtime_resume()
Xiongfeng Wang <[email protected]>
iommu/iova: Fix race between FQ timeout and teardown
Cezary Rojewski <[email protected]>
ASoC: Intel: catpt: Test dmaengine_submit() result before moving on
Maxim Levitsky <[email protected]>
iommu/amd: Restore GA log/tail pointer on host resume
Suravee Suthikulpanit <[email protected]>
iommu/amd: Remove iommu_init_ga()
Arnd Bergmann <[email protected]>
dmaengine: pxa/mmp: stop referencing config->slave_id
Lukas Bulwahn <[email protected]>
mips: fix Kconfig reference to PHYS_ADDR_T_64BIT
Lukas Bulwahn <[email protected]>
mips: add SYS_HAS_CPU_MIPS64_R5 config for MIPS Release 5 support
Dillon Min <[email protected]>
clk: stm32: Fix ltdc's clock turn off by clk_disable_unused() after system enter shell
Frank Rowand <[email protected]>
of: unittest: 64 bit dma address test requires arch support
Jim Quinlan <[email protected]>
of: unittest: fix warning on PowerPC frame size warning
Jiasheng Jiang <[email protected]>
ASoC: rt5663: Handle device_property_read_u32_array error codes
Avihai Horon <[email protected]>
RDMA/cma: Let cma_resolve_ib_dev() continue search even after empty entry
Avihai Horon <[email protected]>
RDMA/core: Let ib_find_gid() continue search even after empty entry
Christophe Leroy <[email protected]>
powerpc/powermac: Add additional missing lockdep_register_key()
Thomas Gleixner <[email protected]>
PCI/MSI: Fix pci_irq_vector()/pci_irq_get_affinity()
Kamal Heib <[email protected]>
RDMA/qedr: Fix reporting max_{send/recv}_wr attrs
Bart Van Assche <[email protected]>
scsi: ufs: Fix race conditions related to driver data
Hector Martin <[email protected]>
iommu/io-pgtable-arm: Fix table descriptor paddr formatting
Jiasheng Jiang <[email protected]>
uio: uio_dmem_genirq: Catch the Exception
Stafford Horne <[email protected]>
openrisc: Add clone3 ABI wrapper
Todd Kjos <[email protected]>
binder: fix handling of error during copy
Kees Cook <[email protected]>
char/mwave: Adjust io port register size
Takashi Iwai <[email protected]>
ALSA: usb-audio: Drop superfluous '0' in Presonus Studio 1810c's ID
Bixuan Cui <[email protected]>
ALSA: oss: fix compile error when OSS_DEBUG is enabled
Waiman Long <[email protected]>
clocksource: Avoid accidental unstable marking of clocksources
Paul E. McKenney <[email protected]>
clocksource: Reduce clocksource-skew threshold
Christophe Leroy <[email protected]>
powerpc/32s: Fix shift-out-of-bounds in KASAN init
Athira Rajeev <[email protected]>
powerpc/perf: Fix PMU callbacks to clear pending PMI before resetting an overflown PMC
Christophe Leroy <[email protected]>
powerpc/irq: Add helper to set regs->softe
Nicholas Piggin <[email protected]>
powerpc/perf: move perf irq/nmi handling details into traps.c
Athira Rajeev <[email protected]>
powerpc/perf: MMCR0 control for PMU registers under PMCC=00
Jordan Niethe <[email protected]>
powerpc/64s: Convert some cpu_setup() and cpu_restore() functions to C
Niklas Söderlund <[email protected]>
dt-bindings: thermal: Fix definition of cooling-maps contribution property
Lukas Bulwahn <[email protected]>
ASoC: uniphier: drop selecting non-existing SND_SOC_UNIPHIER_AIO_DMA
Peiwei Hu <[email protected]>
powerpc/prom_init: Fix improper check of prom_getprop()
Adam Ford <[email protected]>
clk: imx8mn: Fix imx8mn_clko1_sels
Igor Pylypiv <[email protected]>
scsi: pm80xx: Update WARN_ON check in pm8001_mpi_build_cmd()
Kamal Heib <[email protected]>
RDMA/hns: Validate the pkey index
Christophe JAILLET <[email protected]>
RDMA/bnxt_re: Scan the whole bitmap when checking if "disabling RCFW with pending cmd-bit"
Takashi Iwai <[email protected]>
ALSA: hda: Add missing rwsem around snd_ctl_remove() calls
Takashi Iwai <[email protected]>
ALSA: PCM: Add missing rwsem around snd_ctl_remove() calls
Takashi Iwai <[email protected]>
ALSA: jack: Add missing rwsem around snd_ctl_remove() calls
Jan Kara <[email protected]>
ext4: avoid trim error on fs with small groups
Pavel Skripkin <[email protected]>
net: mcs7830: handle usb read errors properly
Nathan Chancellor <[email protected]>
iwlwifi: mvm: Use div_s64 instead of do_div in iwl_mvm_ftm_rtt_smoothing()
Dominik Brodowski <[email protected]>
pcmcia: fix setting of kthread task states
Jiasheng Jiang <[email protected]>
can: xilinx_can: xcan_probe(): check for error irq
Marc Kleine-Budde <[email protected]>
can: softing: softing_startstop(): fix set but not used variable warning
Christophe Jaillet <[email protected]>
tpm_tis: Fix an error handling path in 'tpm_tis_core_init()'
Chen Jun <[email protected]>
tpm: add request_locality before write TPM_INT_ENABLE
Marc Kleine-Budde <[email protected]>
can: mcp251xfd: add missing newline to printed strings
Fabio Estevam <[email protected]>
regmap: Call regmap_debugfs_exit() prior to _init()
Dan Carpenter <[email protected]>
netrom: fix api breakage in nr_setsockopt()
Dan Carpenter <[email protected]>
ax25: uninitialized variable in ax25_setsockopt()
Miaoqian Lin <[email protected]>
spi: spi-meson-spifc: Add missing pm_runtime_disable() in meson_spifc_probe
Dan Carpenter <[email protected]>
Bluetooth: L2CAP: uninitialized variables in l2cap_sock_setsockopt()
Zizhuang Deng <[email protected]>
lib/mpi: Add the return value check of kcalloc()
Moshe Shemesh <[email protected]>
net/mlx5: Set command entry semaphore up once got index free
Aya Levin <[email protected]>
Revert "net/mlx5e: Block offload of outer header csum for UDP tunnels"
Maor Dickman <[email protected]>
net/mlx5e: Don't block routes with nexthop objects in SW
Aya Levin <[email protected]>
net/mlx5e: Fix page DMA map/unmap attributes
Michal Suchanek <[email protected]>
debugfs: lockdown: Allow reading debugfs files that are not world readable
José Expósito <[email protected]>
HID: hid-uclogic-params: Invalid parameter check in uclogic_params_frame_init_v1_buttonpad
José Expósito <[email protected]>
HID: hid-uclogic-params: Invalid parameter check in uclogic_params_huion_init
José Expósito <[email protected]>
HID: hid-uclogic-params: Invalid parameter check in uclogic_params_get_str_desc
José Expósito <[email protected]>
HID: hid-uclogic-params: Invalid parameter check in uclogic_params_init
Miaoqian Lin <[email protected]>
usb: dwc3: qcom: Fix NULL vs IS_ERR checking in dwc3_qcom_probe
Miaoqian Lin <[email protected]>
Bluetooth: hci_qca: Fix NULL vs IS_ERR_OR_NULL check in qca_serdev_probe
Jiasheng Jiang <[email protected]>
Bluetooth: hci_bcm: Check for error irq
Jiasheng Jiang <[email protected]>
fsl/fman: Check for null pointer after calling devm_ioremap
Jiasheng Jiang <[email protected]>
staging: greybus: audio: Check null pointer
Dan Carpenter <[email protected]>
rocker: fix a sleeping in atomic bug
Eric Dumazet <[email protected]>
ppp: ensure minimum packet size in ppp_write()
Florian Westphal <[email protected]>
netfilter: nft_set_pipapo: allocate pcpu scratch maps on clone
Kuniyuki Iwashima <[email protected]>
bpf: Fix SO_RCVBUF/SO_SNDBUF handling in _bpf_setsockopt().
Daniel Borkmann <[email protected]>
bpf: Don't promote bogus looking registers after null check.
Xin Xiong <[email protected]>
netfilter: ipt_CLUSTERIP: fix refcount leak in clusterip_tg_check()
Jiasheng Jiang <[email protected]>
power: reset: mt6397: Check for null res pointer
Zhou Qingyang <[email protected]>
pcmcia: rsrc_nonstatic: Fix a NULL pointer dereference in nonstatic_find_mem_region()
Zhou Qingyang <[email protected]>
pcmcia: rsrc_nonstatic: Fix a NULL pointer dereference in __nonstatic_find_io_region()
Hans de Goede <[email protected]>
ACPI: scan: Create platform device for BCM4752 and LNV4752 ACPI nodes
Zhang Zixun <[email protected]>
x86/mce/inject: Avoid out-of-bounds write when setting flags
Arseny Demidov <[email protected]>
hwmon: (mr75203) fix wrong power-up delay value
Nathan Chancellor <[email protected]>
x86/boot/compressed: Move CLANG_FLAGS to beginning of KBUILD_CFLAGS
Panicker Harish <[email protected]>
Bluetooth: hci_qca: Stop IBS timer during BT OFF
Clément Léger <[email protected]>
software node: fix wrong node passed to find nargs_prop
Marijn Suijten <[email protected]>
backlight: qcom-wled: Respect enabled-strings in set_brightness
Marijn Suijten <[email protected]>
backlight: qcom-wled: Use cpu_to_le16 macro to perform conversion
Marijn Suijten <[email protected]>
backlight: qcom-wled: Override default length with qcom,enabled-strings
Marijn Suijten <[email protected]>
backlight: qcom-wled: Fix off-by-one maximum with default num_strings
Marijn Suijten <[email protected]>
backlight: qcom-wled: Pass number of elements to read to read_u32_array
Marijn Suijten <[email protected]>
backlight: qcom-wled: Validate enabled string indices in DT
Paul Chaignon <[email protected]>
bpftool: Enable line buffering for stdout
Luiz Augusto von Dentz <[email protected]>
Bluetooth: L2CAP: Fix using wrong mode
Johannes Berg <[email protected]>
um: virtio_uml: Fix time-travel external time propagation
Johannes Berg <[email protected]>
um: fix ndelay/udelay defines
Bernard Zhao <[email protected]>
selinux: fix potential memleak in selinux_add_opt()
Sergey Shtylyov <[email protected]>
mmc: meson-mx-sdio: add IRQ check
Sergey Shtylyov <[email protected]>
mmc: meson-mx-sdhc: add IRQ check
Nathan Errera <[email protected]>
iwlwifi: mvm: test roc running status bits before removing the sta
Johannes Berg <[email protected]>
iwlwifi: mvm: fix 32-bit build in FTM
Marek Behún <[email protected]>
ARM: dts: armada-38x: Add generic compatible to UART nodes
Robert Marko <[email protected]>
arm64: dts: marvell: cn9130: enable CP0 GPIO controllers
Robert Marko <[email protected]>
arm64: dts: marvell: cn9130: add GPIO and SPI aliases
Wei Yongjun <[email protected]>
usb: ftdi-elan: fix memory leak on device disconnect
Andre Przywara <[email protected]>
ARM: 9159/1: decompressor: Avoid UNPREDICTABLE NOP encoding
Antony Antony <[email protected]>
xfrm: state and policy should fail if XFRMA_IF_ID 0
Antony Antony <[email protected]>
xfrm: interface with if_id 0 should return error
Jernej Skrabec <[email protected]>
media: hantro: Fix probe func error path
Robin Murphy <[email protected]>
drm/tegra: vic: Fix DMA API misuse
Stephen Boyd <[email protected]>
drm/bridge: ti-sn65dsi86: Set max register for regmap
Dmitry Baryshkov <[email protected]>
drm/msm/dpu: fix safe status debugfs file
Baruch Siach <[email protected]>
arm64: dts: qcom: ipq6018: Fix gpio-ranges property
Srinivas Kandagatla <[email protected]>
arm64: dts: qcom: c630: Fix soundcard setup
Zhou Qingyang <[email protected]>
ath11k: Fix a NULL pointer dereference in ath11k_mac_op_hw_scan()
Jiasheng Jiang <[email protected]>
media: coda/imx-vdoa: Handle dma_set_coherent_mask error codes
Wang Hai <[email protected]>
media: msi001: fix possible null-ptr-deref in msi001_probe()
Anton Vasilyev <[email protected]>
media: dw2102: Fix use after free
Christian Lamparter <[email protected]>
ARM: dts: gemini: NAS4220-B: fis-index-block with 128 KiB sectors
Rameshkumar Sundaram <[email protected]>
ath11k: Fix deleting uninitialized kernel timer during fragment cache flush
Herbert Xu <[email protected]>
crypto: stm32 - Revert broken pm_runtime_resume_and_get changes
Nicolas Toromanoff <[email protected]>
crypto: stm32/cryp - fix bugs and crash in tests
Nicolas Toromanoff <[email protected]>
crypto: stm32/cryp - fix lrw chaining mode
Nicolas Toromanoff <[email protected]>
crypto: stm32/cryp - fix double pm exit
Nicolas Toromanoff <[email protected]>
crypto: stm32/cryp - check early input data
Nicolas Toromanoff <[email protected]>
crypto: stm32/cryp - fix xts and race condition in crypto_engine requests
Nicolas Toromanoff <[email protected]>
crypto: stm32/cryp - fix CTR counter carry
Herbert Xu <[email protected]>
crypto: stm32 - Fix last sparse warning in stm32_cryp_check_ctr_counter
Jakub Kicinski <[email protected]>
selftests: harness: avoid false negatives if test has no ASSERTs
Anders Roxell <[email protected]>
selftests: clone3: clone3: add case CLONE3_ARGS_NO_TEST
Kees Cook <[email protected]>
x86/uaccess: Move variable into switch case statement
Eric Dumazet <[email protected]>
xfrm: fix a small bug in xfrm_sa_len()
Brian Norris <[email protected]>
mwifiex: Fix possible ABBA deadlock
Frederic Weisbecker <[email protected]>
rcu/exp: Mark current CPU as exp-QS in IPI loop second pass
Jackie Liu <[email protected]>
drm/msm/dp: displayPort driver need algorithm rational
Li Hua <[email protected]>
sched/rt: Try to restart rt period timer when rt runtime exceeded
Lv Yunlong <[email protected]>
wireless: iwlwifi: Fix a double free in iwl_txq_dyn_alloc_dma
Robert Schlabbach <[email protected]>
media: si2157: Fix "warm" tuner state detection
Zhou Qingyang <[email protected]>
media: saa7146: mxb: Fix a NULL pointer dereference in mxb_attach()
Zhou Qingyang <[email protected]>
media: dib8000: Fix a memleak in dib8000_init()
Reiji Watanabe <[email protected]>
arm64: clear_page() shouldn't use DC ZVA when DCZID_EL0.DZP == 1
Will Deacon <[email protected]>
arm64: lib: Annotate {clear, copy}_page() as position-independent
Kajol Jain <[email protected]>
bpf: Remove config check to enable bpf support for branch records
Hou Tao <[email protected]>
bpf: Disallow BPF_LOG_KERNEL log level for bpf(BPF_BTF_LOAD)
Alexei Starovoitov <[email protected]>
bpf: Adjust BTF log size limit.
Vincent Donnefort <[email protected]>
sched/fair: Fix per-CPU kthread and wakee stacking for asym CPU capacity
Vincent Donnefort <[email protected]>
sched/fair: Fix detection of per-CPU kthreads waking a task
Sean Wang <[email protected]>
Bluetooth: btmtksdio: fix resume failure
Yang Yingliang <[email protected]>
staging: rtl8192e: rtllib_module: fix error handle case in alloc_rtllib()
Yang Yingliang <[email protected]>
staging: rtl8192e: return error code from rtllib_softmac_init()
Tasos Sahanidis <[email protected]>
floppy: Fix hang in watchdog when disk is ejected
Lino Sanfilippo <[email protected]>
serial: amba-pl011: do not request memory region twice
Lizhi Hou <[email protected]>
tty: serial: uartlite: allow 64 bit address
Nishanth Menon <[email protected]>
arm64: dts: ti: k3-j7200: Correct the d-cache-sets info
Nishanth Menon <[email protected]>
arm64: dts: ti: k3-j721e: Fix the L2 cache sets
Nishanth Menon <[email protected]>
arm64: dts: ti: k3-j7200: Fix the L2 cache sets
Zhou Qingyang <[email protected]>
drm/radeon/radeon_kms: Fix a NULL pointer dereference in radeon_driver_open_kms()
Zhou Qingyang <[email protected]>
drm/amdgpu: Fix a NULL pointer dereference in amdgpu_connector_lcd_native_mode()
Paul Gerber <[email protected]>
thermal/drivers/imx8mm: Enable ADC when enabling monitor
Rafael J. Wysocki <[email protected]>
ACPI: EC: Rework flushing of EC work while suspended to idle
William Kucharski <[email protected]>
cgroup: Trace event cgroup id fields should be u64
Dmitry Baryshkov <[email protected]>
arm64: dts: qcom: msm8916: fix MMC controller aliases
Florian Westphal <[email protected]>
netfilter: bridge: add support for pppoe filtering
Oleksij Rempel <[email protected]>
thermal/drivers/imx: Implement runtime PM support
Christophe JAILLET <[email protected]>
media: venus: core: Fix a resource leak in the error handling path of 'venus_probe()'
Christophe JAILLET <[email protected]>
media: venus: core: Fix a potential NULL pointer dereference in an error handling path
Bryan O'Donoghue <[email protected]>
media: venus: core, venc, vdec: Fix probe dependency error
Stanimir Varbanov <[email protected]>
media: venus: pm_helpers: Control core power domain manually
Philipp Zabel <[email protected]>
media: coda: fix CODA960 JPEG encoder buffer overflow
Dafna Hirschfeld <[email protected]>
media: mtk-vcodec: call v4l2_m2m_ctx_release first when file is released
Yang Yingliang <[email protected]>
media: si470x-i2c: fix possible memory leak in si470x_i2c_probe()
Fabio Estevam <[email protected]>
media: imx-pxp: Initialize the spinlock prior to using it
Suresh Udipi <[email protected]>
media: rcar-csi2: Correct the selection of hsfreqrange
Claudiu Beznea <[email protected]>
mfd: atmel-flexcom: Use .resume_noirq
Claudiu Beznea <[email protected]>
mfd: atmel-flexcom: Remove #ifdef CONFIG_PM_SLEEP
Tudor Ambarus <[email protected]>
tty: serial: atmel: Call dma_async_issue_pending()
Tudor Ambarus <[email protected]>
tty: serial: atmel: Check return code of dmaengine_submit()
Peng Fan <[email protected]>
arm64: dts: ti: k3-j721e: correct cache-sets info
Anilkumar Kolli <[email protected]>
ath11k: Use host CE parameters for CE interrupts configuration
Giovanni Cabiddu <[email protected]>
crypto: qat - fix undetected PFVF timeout in ACK loop
Marco Chiappero <[email protected]>
crypto: qat - make pfvf send message direction agnostic
Marco Chiappero <[email protected]>
crypto: qat - remove unnecessary collision prevention step in PFVF
Bhaskar Chowdhury <[email protected]>
crypto: qat - fix spelling mistake: "messge" -> "message"
Dillon Min <[email protected]>
ARM: dts: stm32: fix dtbs_check warning on ili9341 dts binding on stm32f429 disco
George G. Davis <[email protected]>
mtd: hyperbus: rpc-if: fix bug in rpcif_hb_remove
Chengfeng Ye <[email protected]>
crypto: qce - fix uaf on qce_skcipher_register_one
Chengfeng Ye <[email protected]>
crypto: qce - fix uaf on qce_ahash_register_one
Wang Hai <[email protected]>
media: dmxdev: fix UAF when dvb_register_device() fails
Biju Das <[email protected]>
arm64: dts: renesas: cat875: Add rx/tx delays
Dan Carpenter <[email protected]>
drm/vboxvideo: fix a NULL vs IS_ERR() check
Alexander Aring <[email protected]>
fs: dlm: fix build with CONFIG_IPV6 disabled
Jens Wiklander <[email protected]>
tee: fix put order in teedev_close_context()
Karthikeyan Kathirvel <[email protected]>
ath11k: reset RSN/WPA present state for open BSS
Karthikeyan Kathirvel <[email protected]>
ath11k: clear the keys properly via DISABLE_KEY
Sven Eckelmann <[email protected]>
ath11k: Fix ETSI regd with weather radar overlap
Pavel Skripkin <[email protected]>
Bluetooth: stop proccessing malicious adv data
Lad Prabhakar <[email protected]>
memory: renesas-rpc-if: Return error in case devm_ioremap_resource() fails
Alexander Aring <[email protected]>
fs: dlm: don't call kernel_getpeername() in error_report()
Alexander Aring <[email protected]>
fs: dlm: use sk->sk_socket instead of con->sock
Christian Hewitt <[email protected]>
arm64: dts: meson-gxbb-wetek: fix missing GPIO binding
Christian Hewitt <[email protected]>
arm64: dts: meson-gxbb-wetek: fix HDMI in early boot
Alexander Stein <[email protected]>
arm64: dts: amlogic: Fix SPI NOR flash node name for ODROID N2/N2+
Alexander Stein <[email protected]>
arm64: dts: amlogic: meson-g12: Fix GPU operating point table node name
Jammy Huang <[email protected]>
media: aspeed: Update signal status immediately to ensure sane hw state
Dongliang Mu <[email protected]>
media: em28xx: fix memory leak in em28xx_init_dev
Jammy Huang <[email protected]>
media: aspeed: fix mode-detect always time out at 2nd run
Dan Carpenter <[email protected]>
media: atomisp: fix uninitialized bug in gmin_get_pmic_id_and_addr()
Mauro Carvalho Chehab <[email protected]>
media: atomisp: fix enum formats logic
Tsuchiya Yuto <[email protected]>
media: atomisp: add NULL check for asd obtained from atomisp_video_pipe
Aline Santana Cordeiro <[email protected]>
media: staging: media: atomisp: pci: Balance braces around conditional statements in file atomisp_cmd.c
Tsuchiya Yuto <[email protected]>
media: atomisp: fix ifdefs in sh_css.c
Tsuchiya Yuto <[email protected]>
media: atomisp: fix inverted error check for ia_css_mipi_is_source_port_valid()
Tsuchiya Yuto <[email protected]>
media: atomisp: do not use err var when checking port validity for ISP2400
Tsuchiya Yuto <[email protected]>
media: atomisp: fix inverted logic in buffers_needed()
Tsuchiya Yuto <[email protected]>
media: atomisp: fix punit_ddr_dvfs_enable() argument for mrfld_power up case
Tsuchiya Yuto <[email protected]>
media: atomisp: add missing media_device_cleanup() in atomisp_unregister_entities()
Dillon Min <[email protected]>
media: videobuf2: Fix the size printk format
Lad Prabhakar <[email protected]>
mtd: hyperbus: rpc-if: Check return value of rpcif_sw_init()
Rameshkumar Sundaram <[email protected]>
ath11k: Send PPDU_STATS_CFG with proper pdev mask to firmware
Benjamin Li <[email protected]>
wcn36xx: fix RX BD rate mapping for 5GHz legacy rates
Benjamin Li <[email protected]>
wcn36xx: populate band before determining rate on RX
Bryan O'Donoghue <[email protected]>
wcn36xx: Put DXE block into reset before freeing memory
Bryan O'Donoghue <[email protected]>
wcn36xx: Release DMA channel descriptor allocations
Bryan O'Donoghue <[email protected]>
wcn36xx: Fix DMA channel enable/disable cycle
Bryan O'Donoghue <[email protected]>
wcn36xx: Indicate beacon not connection loss on MISSED_BEACON_IND
Benjamin Li <[email protected]>
wcn36xx: ensure pairing of init_scan/finish_scan and start_scan/end_scan
Maxime Ripard <[email protected]>
drm/vc4: hdmi: Set a default HSM rate
Maxime Ripard <[email protected]>
clk: bcm-2835: Remove rounding up the dividers
Maxime Ripard <[email protected]>
clk: bcm-2835: Pick the closest clock rate
Wang Hai <[email protected]>
Bluetooth: cmtp: fix possible panic when cmtp_init_sockets() fails
Brian Norris <[email protected]>
drm/rockchip: dsi: Reconfigure hardware on resume()
Brian Norris <[email protected]>
drm/rockchip: dsi: Disable PLL clock on bind error
Brian Norris <[email protected]>
drm/rockchip: dsi: Hold pm-runtime across bind/unbind
Brian Norris <[email protected]>
drm/rockchip: dsi: Fix unbalanced clock on probe error
Brian Norris <[email protected]>
drm/panel: innolux-p079zca: Delete panel on attach() failure
Brian Norris <[email protected]>
drm/panel: kingdisplay-kd097d04: Delete panel on attach() failure
Wang Hai <[email protected]>
drm: fix null-ptr-deref in drm_dev_init_release()
Dan Carpenter <[email protected]>
drm/bridge: display-connector: fix an uninitialized pointer in probe()
Luiz Augusto von Dentz <[email protected]>
Bluetooth: L2CAP: Fix not initializing sk_peer_pid
xinhui pan <[email protected]>
drm/ttm: Put BO in its memory manager's lru list
Gang Li <[email protected]>
shmem: fix a race between shmem_unused_huge_shrink and shmem_evict_inode
Baoquan He <[email protected]>
mm/page_alloc.c: do not warn allocation failure on zone DMA if no managed pages
Baoquan He <[email protected]>
dma/pool: create dma atomic pool only if dma zone has managed pages
Baoquan He <[email protected]>
mm_zone: add function to check if managed dma zone exists
Yifeng Li <[email protected]>
PCI: Add function 1 DMA alias quirk for Marvell 88SE9125 SATA controller
Thomas Hellström <[email protected]>
dma_fence_array: Fix PENDING_ERROR leak in dma_fence_array_signaled()
Dmitry Osipenko <[email protected]>
gpu: host1x: Add back arm_iommu_detach_device()
Yunfei Wang <[email protected]>
iommu/io-pgtable-arm-v7s: Add error handle for page table allocation failure
Christophe Leroy <[email protected]>
lkdtm: Fix content of section containing lkdtm_rodata_do_nothing()
Jonathan Cameron <[email protected]>
iio: adc: ti-adc081c: Partial revert of removal of ACPI IDs
Johan Hovold <[email protected]>
can: softing_cs: softingcs_probe(): fix memleak on registration failure
Hans Verkuil <[email protected]>
media: cec-pin: fix interrupt en/disable handling
Johan Hovold <[email protected]>
media: stk1160: fix control-message timeouts
Johan Hovold <[email protected]>
media: pvrusb2: fix control-message timeouts
Johan Hovold <[email protected]>
media: redrat3: fix control-message timeouts
Michael Kuron <[email protected]>
media: dib0700: fix undefined behavior in tuner shutdown
Johan Hovold <[email protected]>
media: s2255: fix control-message timeouts
Johan Hovold <[email protected]>
media: cpia2: fix control-message timeouts
Johan Hovold <[email protected]>
media: em28xx: fix control-message timeouts
Johan Hovold <[email protected]>
media: mceusb: fix control-message timeouts
Johan Hovold <[email protected]>
media: flexcop-usb: fix control-message timeouts
Hans Verkuil <[email protected]>
media: v4l2-ioctl.c: readbuffers depends on V4L2_CAP_READWRITE
Mateusz Jończyk <[email protected]>
rtc: cmos: take rtc_lock while reading from CMOS
Willy Tarreau <[email protected]>
tools/nolibc: fix incorrect truncation of exit code
Willy Tarreau <[email protected]>
tools/nolibc: i386: fix initial stack alignment
Ammar Faizi <[email protected]>
tools/nolibc: x86-64: Fix startup code bug
Lucas De Marchi <[email protected]>
x86/gpu: Reserve stolen memory for first integrated Intel GPU
Paul Cercueil <[email protected]>
mtd: rawnand: davinci: Rewrite function description
Paul Cercueil <[email protected]>
mtd: rawnand: davinci: Avoid duplicated page read
Paul Cercueil <[email protected]>
mtd: rawnand: davinci: Don't calculate ECC when reading page
Andreas Oetken <[email protected]>
mtd: Fixed breaking list in __mtd_del_partition.
Stefan Riedmueller <[email protected]>
mtd: rawnand: gpmi: Remove explicit default gpmi clock setting for i.MX6
Christian Eggers <[email protected]>
mtd: rawnand: gpmi: Add ERR007117 protection for nfc_apply_timings
Krzysztof Kozlowski <[email protected]>
nfc: llcp: fix NULL error pointer dereference on sendmsg() after failed bind()
Chao Yu <[email protected]>
f2fs: fix to do sanity check in is_alive()
Jason Gerecke <[email protected]>
HID: wacom: Avoid using stale array indicies to read contact count
Jason Gerecke <[email protected]>
HID: wacom: Ignore the confidence flag when a touch is removed
Jason Gerecke <[email protected]>
HID: wacom: Reset expected and received contact counts at the same time
Jann Horn <[email protected]>
HID: uhid: Fix worker destroying device without any protection
Marcelo Tosatti <[email protected]>
KVM: VMX: switch blocked_vcpu_on_cpu_lock to raw spinlock
-------------
Diffstat:
.../ABI/testing/sysfs-bus-iio-lptimer-stm32 | 62 --
Documentation/admin-guide/hw-vuln/spectre.rst | 2 +-
.../bindings/display/amlogic,meson-dw-hdmi.yaml | 5 +
.../bindings/display/amlogic,meson-vpu.yaml | 6 +
.../devicetree/bindings/thermal/thermal-zones.yaml | 9 +-
.../devicetree/bindings/watchdog/samsung-wdt.yaml | 5 +-
Documentation/driver-api/dmaengine/dmatest.rst | 7 +-
Documentation/driver-api/firewire.rst | 4 +-
.../acpi/dsd/data-node-references.rst | 10 +-
Makefile | 4 +-
arch/arm/Kconfig.debug | 14 +-
arch/arm/boot/compressed/efi-header.S | 22 +-
arch/arm/boot/compressed/head.S | 3 +-
arch/arm/boot/dts/armada-38x.dtsi | 4 +-
arch/arm/boot/dts/gemini-nas4220b.dts | 2 +-
arch/arm/boot/dts/omap3-n900.dts | 50 +-
arch/arm/boot/dts/stm32f429-disco.dts | 2 +-
arch/arm/include/debug/imx-uart.h | 18 +-
arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c | 5 +-
arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi | 2 +-
.../boot/dts/amlogic/meson-g12b-odroid-n2.dtsi | 2 +-
arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi | 3 +
arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts | 14 +-
arch/arm64/boot/dts/marvell/cn9130.dtsi | 15 +
arch/arm64/boot/dts/nvidia/tegra186.dtsi | 2 +-
arch/arm64/boot/dts/nvidia/tegra194.dtsi | 9 +-
arch/arm64/boot/dts/qcom/ipq6018.dtsi | 2 +-
arch/arm64/boot/dts/qcom/msm8916.dtsi | 4 +-
arch/arm64/boot/dts/qcom/msm8996.dtsi | 3 -
.../boot/dts/qcom/sdm850-lenovo-yoga-c630.dts | 27 +
arch/arm64/boot/dts/renesas/cat875.dtsi | 1 +
arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 2 +-
arch/arm64/boot/dts/ti/k3-j7200.dtsi | 6 +-
arch/arm64/boot/dts/ti/k3-j721e.dtsi | 6 +-
arch/arm64/include/asm/extable.h | 9 -
arch/arm64/include/asm/memory.h | 5 +-
arch/arm64/kernel/traps.c | 2 +-
arch/arm64/lib/clear_page.S | 14 +-
arch/arm64/lib/copy_page.S | 4 +-
arch/arm64/mm/ptdump.c | 2 -
arch/arm64/net/bpf_jit_comp.c | 7 +-
arch/mips/Kconfig | 6 +-
arch/mips/bcm63xx/clk.c | 6 +
arch/mips/cavium-octeon/octeon-platform.c | 2 +
arch/mips/cavium-octeon/octeon-usb.c | 1 +
.../asm/mach-loongson64/kernel-entry-init.h | 4 +-
arch/mips/include/asm/octeon/cvmx-bootinfo.h | 4 +-
arch/mips/lantiq/clk.c | 6 +
arch/openrisc/include/asm/syscalls.h | 2 +
arch/openrisc/kernel/entry.S | 5 +
arch/parisc/include/asm/special_insns.h | 44 +-
arch/parisc/kernel/traps.c | 2 +-
arch/powerpc/boot/dts/fsl/qoriq-fman3l-0.dtsi | 2 +
arch/powerpc/include/asm/cpu_setup_power.h | 12 +
arch/powerpc/include/asm/hw_irq.h | 51 +-
arch/powerpc/include/asm/reg.h | 1 +
arch/powerpc/kernel/btext.c | 4 +-
arch/powerpc/kernel/cpu_setup_power.S | 252 ------
arch/powerpc/kernel/cpu_setup_power.c | 272 ++++++
arch/powerpc/kernel/cputable.c | 12 +-
arch/powerpc/kernel/dt_cpu_ftrs.c | 1 +
arch/powerpc/kernel/fadump.c | 8 +
arch/powerpc/kernel/head_40x.S | 9 +-
arch/powerpc/kernel/prom_init.c | 2 +-
arch/powerpc/kernel/smp.c | 42 +
arch/powerpc/kernel/traps.c | 31 +-
arch/powerpc/kernel/watchdog.c | 41 +-
arch/powerpc/kvm/book3s_hv.c | 8 +-
arch/powerpc/kvm/book3s_hv_nested.c | 2 +-
arch/powerpc/mm/book3s64/radix_pgtable.c | 4 +-
arch/powerpc/mm/kasan/book3s_32.c | 3 +-
arch/powerpc/mm/pgtable_64.c | 14 +-
arch/powerpc/perf/core-book3s.c | 97 ++-
arch/powerpc/perf/core-fsl-emb.c | 25 -
arch/powerpc/perf/isa207-common.c | 8 +
arch/powerpc/platforms/cell/iommu.c | 1 +
arch/powerpc/platforms/cell/pervasive.c | 1 +
arch/powerpc/platforms/embedded6xx/hlwd-pic.c | 1 +
arch/powerpc/platforms/powermac/low_i2c.c | 3 +
arch/powerpc/platforms/powernv/opal-lpc.c | 1 +
arch/powerpc/sysdev/xive/spapr.c | 3 +
arch/s390/mm/pgalloc.c | 4 +-
arch/um/drivers/virtio_uml.c | 4 +
arch/um/include/asm/delay.h | 4 +-
arch/um/include/shared/registers.h | 4 +-
arch/um/os-Linux/registers.c | 4 +-
arch/um/os-Linux/start_up.c | 2 +-
arch/x86/boot/compressed/Makefile | 7 +-
arch/x86/configs/i386_defconfig | 1 +
arch/x86/configs/x86_64_defconfig | 1 +
arch/x86/include/asm/realmode.h | 1 +
arch/x86/include/asm/uaccess.h | 5 +-
arch/x86/kernel/cpu/mce/core.c | 42 +-
arch/x86/kernel/cpu/mce/inject.c | 2 +-
arch/x86/kernel/early-quirks.c | 10 +-
arch/x86/kernel/reboot.c | 12 +-
arch/x86/kernel/tsc.c | 1 +
arch/x86/kvm/vmx/posted_intr.c | 16 +-
arch/x86/realmode/init.c | 26 +
arch/x86/um/syscalls_64.c | 3 +-
block/blk-flush.c | 4 +-
block/blk-pm.c | 22 +-
crypto/jitterentropy.c | 3 +-
drivers/acpi/acpica/exfield.c | 7 +-
drivers/acpi/acpica/exoparg1.c | 3 +-
drivers/acpi/acpica/hwesleep.c | 4 +-
drivers/acpi/acpica/hwsleep.c | 4 +-
drivers/acpi/acpica/hwxfsleep.c | 2 -
drivers/acpi/acpica/utdelete.c | 1 +
drivers/acpi/battery.c | 22 +
drivers/acpi/bus.c | 4 +-
drivers/acpi/ec.c | 57 +-
drivers/acpi/internal.h | 2 +
drivers/acpi/scan.c | 13 +-
drivers/acpi/x86/utils.c | 116 ++-
drivers/android/binder.c | 4 +-
drivers/base/core.c | 3 +-
drivers/base/power/runtime.c | 41 +-
drivers/base/property.c | 4 +-
drivers/base/regmap/regmap.c | 1 +
drivers/base/swnode.c | 2 +-
drivers/block/floppy.c | 6 +-
drivers/bluetooth/btmtksdio.c | 2 +
drivers/bluetooth/hci_bcm.c | 7 +-
drivers/bluetooth/hci_qca.c | 5 +-
drivers/bluetooth/hci_vhci.c | 2 +
drivers/char/mwave/3780i.h | 2 +-
drivers/char/random.c | 19 +-
drivers/char/tpm/tpm_tis_core.c | 14 +-
drivers/clk/bcm/clk-bcm2835.c | 13 +-
drivers/clk/clk-bm1880.c | 20 +-
drivers/clk/clk-si5341.c | 2 +-
drivers/clk/clk-stm32f4.c | 4 -
drivers/clk/clk.c | 18 +
drivers/clk/imx/clk-imx8mn.c | 6 +-
drivers/clk/meson/gxbb.c | 44 +-
drivers/counter/Kconfig | 2 +-
drivers/counter/stm32-lptimer-cnt.c | 297 +------
drivers/cpufreq/cpufreq.c | 4 +-
drivers/crypto/caam/caamalg_qi2.c | 2 +-
drivers/crypto/omap-aes.c | 2 +-
drivers/crypto/qat/qat_common/adf_pf2vf_msg.c | 45 +-
drivers/crypto/qat/qat_common/adf_vf2pf_msg.c | 4 +-
drivers/crypto/qce/sha.c | 2 +-
drivers/crypto/qce/skcipher.c | 2 +-
drivers/crypto/stm32/stm32-crc32.c | 4 +-
drivers/crypto/stm32/stm32-cryp.c | 938 ++++++++-------------
drivers/crypto/stm32/stm32-hash.c | 6 +-
drivers/dma-buf/dma-fence-array.c | 6 +-
drivers/dma/at_xdmac.c | 57 +-
drivers/dma/mmp_pdma.c | 6 -
drivers/dma/pxa_dma.c | 7 -
drivers/dma/stm32-mdma.c | 2 +-
drivers/dma/uniphier-xdmac.c | 5 +-
drivers/edac/synopsys_edac.c | 3 +-
drivers/firmware/google/Kconfig | 6 +-
drivers/gpio/gpio-aspeed.c | 52 +-
drivers/gpio/gpiolib-acpi.c | 15 +-
drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c | 6 +
drivers/gpu/drm/amd/amdgpu/amdgpu_irq.c | 1 -
drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c | 13 +-
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 3 +
drivers/gpu/drm/amd/display/dc/core/dc.c | 3 +-
drivers/gpu/drm/amd/pm/amdgpu_pm.c | 6 +
drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c | 14 +-
drivers/gpu/drm/bridge/display-connector.c | 2 +-
.../drm/bridge/megachips-stdpxxxx-ge-b850v3-fw.c | 40 +-
.../gpu/drm/bridge/synopsys/dw-hdmi-ahb-audio.c | 10 +-
drivers/gpu/drm/bridge/synopsys/dw-hdmi-audio.h | 4 +-
.../gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c | 9 +-
drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 12 +-
drivers/gpu/drm/bridge/ti-sn65dsi86.c | 1 +
drivers/gpu/drm/drm_drv.c | 9 +-
drivers/gpu/drm/drm_panel_orientation_quirks.c | 6 +
drivers/gpu/drm/etnaviv/etnaviv_gem_submit.c | 6 +
drivers/gpu/drm/etnaviv/etnaviv_gpu.h | 1 +
drivers/gpu/drm/etnaviv/etnaviv_sched.c | 4 +-
drivers/gpu/drm/lima/lima_device.c | 1 +
drivers/gpu/drm/mediatek/mtk_mipi_tx.c | 2 +
drivers/gpu/drm/msm/Kconfig | 1 +
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 4 +-
drivers/gpu/drm/nouveau/dispnv04/disp.c | 4 +-
drivers/gpu/drm/nouveau/nvkm/subdev/pmu/base.c | 37 +-
drivers/gpu/drm/panel/panel-innolux-p079zca.c | 10 +-
drivers/gpu/drm/panel/panel-kingdisplay-kd097d04.c | 8 +-
drivers/gpu/drm/radeon/radeon_kms.c | 42 +-
drivers/gpu/drm/rcar-du/rcar_du_crtc.c | 20 +-
drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c | 82 +-
drivers/gpu/drm/tegra/vic.c | 7 +-
drivers/gpu/drm/ttm/ttm_bo.c | 2 +
drivers/gpu/drm/vboxvideo/vbox_main.c | 4 +-
drivers/gpu/drm/vc4/vc4_hdmi.c | 24 +-
drivers/gpu/host1x/dev.c | 15 +
drivers/hid/hid-apple.c | 2 +-
drivers/hid/hid-input.c | 6 +
drivers/hid/hid-uclogic-params.c | 31 +-
drivers/hid/hid-vivaldi.c | 34 +-
drivers/hid/uhid.c | 29 +-
drivers/hid/wacom_wac.c | 39 +-
drivers/hsi/hsi_core.c | 1 +
drivers/hwmon/mr75203.c | 2 +-
drivers/i2c/busses/i2c-designware-pcidrv.c | 8 +-
drivers/i2c/busses/i2c-i801.c | 15 +-
drivers/i2c/busses/i2c-mpc.c | 23 +-
drivers/iio/adc/ti-adc081c.c | 22 +-
drivers/infiniband/core/cma.c | 12 +-
drivers/infiniband/core/device.c | 3 +-
drivers/infiniband/hw/bnxt_re/qplib_rcfw.c | 6 +-
drivers/infiniband/hw/bnxt_re/qplib_rcfw.h | 1 -
drivers/infiniband/hw/cxgb4/qp.c | 1 +
drivers/infiniband/hw/hns/hns_roce_main.c | 5 +-
drivers/infiniband/hw/qedr/verbs.c | 2 +
drivers/infiniband/sw/rxe/rxe_opcode.c | 2 +-
drivers/iommu/amd/init.c | 48 +-
drivers/iommu/io-pgtable-arm-v7s.c | 6 +-
drivers/iommu/io-pgtable-arm.c | 9 +-
drivers/iommu/iova.c | 3 +-
drivers/irqchip/irq-gic-v3.c | 16 +
drivers/md/dm.c | 4 +-
drivers/md/persistent-data/dm-btree.c | 8 +-
drivers/md/persistent-data/dm-space-map-common.c | 5 +
drivers/media/Kconfig | 8 +-
drivers/media/cec/core/cec-pin.c | 31 +-
drivers/media/common/saa7146/saa7146_fops.c | 2 +-
.../media/common/videobuf2/videobuf2-dma-contig.c | 8 +-
drivers/media/dvb-core/dmxdev.c | 18 +-
drivers/media/dvb-frontends/dib8000.c | 4 +-
drivers/media/pci/b2c2/flexcop-pci.c | 3 +
drivers/media/pci/saa7146/hexium_gemini.c | 7 +-
drivers/media/pci/saa7146/hexium_orion.c | 8 +-
drivers/media/pci/saa7146/mxb.c | 8 +-
drivers/media/platform/aspeed-video.c | 14 +-
drivers/media/platform/coda/coda-common.c | 8 +-
drivers/media/platform/coda/coda-jpeg.c | 21 +-
drivers/media/platform/coda/imx-vdoa.c | 6 +-
drivers/media/platform/imx-pxp.c | 4 +-
.../media/platform/mtk-vcodec/mtk_vcodec_enc_drv.c | 2 +-
drivers/media/platform/qcom/venus/core.c | 39 +-
drivers/media/platform/qcom/venus/core.h | 2 -
drivers/media/platform/qcom/venus/pm_helpers.c | 94 +--
drivers/media/platform/qcom/venus/pm_helpers.h | 7 +-
drivers/media/platform/rcar-vin/rcar-csi2.c | 18 +-
drivers/media/platform/rcar-vin/rcar-v4l2.c | 15 +-
drivers/media/radio/si470x/radio-si470x-i2c.c | 3 +-
drivers/media/rc/igorplugusb.c | 4 +-
drivers/media/rc/mceusb.c | 8 +-
drivers/media/rc/redrat3.c | 22 +-
drivers/media/tuners/msi001.c | 7 +
drivers/media/tuners/si2157.c | 2 +-
drivers/media/usb/b2c2/flexcop-usb.c | 10 +-
drivers/media/usb/b2c2/flexcop-usb.h | 12 +-
drivers/media/usb/cpia2/cpia2_usb.c | 4 +-
drivers/media/usb/dvb-usb/dib0700_core.c | 2 -
drivers/media/usb/dvb-usb/dw2102.c | 338 +++++---
drivers/media/usb/dvb-usb/m920x.c | 12 +-
drivers/media/usb/em28xx/em28xx-cards.c | 18 +-
drivers/media/usb/em28xx/em28xx-core.c | 4 +-
drivers/media/usb/pvrusb2/pvrusb2-hdw.c | 8 +-
drivers/media/usb/s2255/s2255drv.c | 4 +-
drivers/media/usb/stk1160/stk1160-core.c | 4 +-
drivers/media/usb/uvc/uvcvideo.h | 2 +-
drivers/media/v4l2-core/v4l2-ioctl.c | 4 +-
drivers/memory/renesas-rpc-if.c | 2 +-
drivers/mfd/atmel-flexcom.c | 11 +-
drivers/misc/lattice-ecp3-config.c | 12 +-
drivers/misc/lkdtm/Makefile | 2 +-
drivers/mmc/core/sdio.c | 4 +-
drivers/mmc/host/meson-mx-sdhc-mmc.c | 5 +
drivers/mmc/host/meson-mx-sdio.c | 5 +
drivers/mtd/hyperbus/rpc-if.c | 8 +-
drivers/mtd/mtdpart.c | 2 +-
drivers/mtd/nand/bbt.c | 2 +-
drivers/mtd/nand/raw/davinci_nand.c | 16 +-
drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c | 37 +-
drivers/net/bonding/bond_main.c | 36 +-
drivers/net/can/softing/softing_cs.c | 2 +-
drivers/net/can/softing/softing_fw.c | 11 +-
drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c | 6 +-
drivers/net/can/xilinx_can.c | 7 +-
drivers/net/ethernet/broadcom/genet/bcmgenet.c | 10 +-
drivers/net/ethernet/chelsio/libcxgb/libcxgb_cm.c | 3 +-
drivers/net/ethernet/cortina/gemini.c | 9 +-
drivers/net/ethernet/freescale/fman/mac.c | 21 +-
drivers/net/ethernet/freescale/xgmac_mdio.c | 28 +-
drivers/net/ethernet/i825xx/sni_82596.c | 3 +-
drivers/net/ethernet/mediatek/mtk_eth_soc.c | 2 +-
drivers/net/ethernet/mellanox/mlx5/core/cmd.c | 36 +-
.../net/ethernet/mellanox/mlx5/core/en/xsk/pool.c | 4 +-
drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 10 +-
drivers/net/ethernet/mellanox/mlx5/core/en_rx.c | 7 +-
drivers/net/ethernet/mellanox/mlx5/core/lag_mp.c | 6 +-
drivers/net/ethernet/mellanox/mlxsw/cmd.h | 12 +
drivers/net/ethernet/mellanox/mlxsw/pci.c | 7 +-
drivers/net/ethernet/mscc/ocelot_flower.c | 15 +-
drivers/net/ethernet/rocker/rocker_ofdpa.c | 3 +-
drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 135 +--
drivers/net/phy/marvell.c | 6 +
drivers/net/phy/mdio_bus.c | 2 +-
drivers/net/phy/phy-core.c | 2 +-
drivers/net/phy/sfp.c | 25 +-
drivers/net/ppp/ppp_generic.c | 7 +-
drivers/net/usb/mcs7830.c | 12 +-
drivers/net/wireless/ath/ar5523/ar5523.c | 4 +
drivers/net/wireless/ath/ath10k/core.c | 19 +-
drivers/net/wireless/ath/ath10k/htt_tx.c | 3 +
drivers/net/wireless/ath/ath10k/hw.h | 3 +
drivers/net/wireless/ath/ath10k/txrx.c | 2 -
drivers/net/wireless/ath/ath11k/ahb.c | 28 +-
drivers/net/wireless/ath/ath11k/core.h | 2 +-
drivers/net/wireless/ath/ath11k/dp.h | 3 +-
drivers/net/wireless/ath/ath11k/dp_tx.c | 2 +-
drivers/net/wireless/ath/ath11k/hal.c | 22 +
drivers/net/wireless/ath/ath11k/hal.h | 2 +
drivers/net/wireless/ath/ath11k/hw.c | 2 -
drivers/net/wireless/ath/ath11k/mac.c | 52 +-
drivers/net/wireless/ath/ath11k/pci.c | 12 +-
drivers/net/wireless/ath/ath11k/reg.c | 103 +--
drivers/net/wireless/ath/ath11k/wmi.c | 5 +-
drivers/net/wireless/ath/ath9k/hif_usb.c | 7 +
drivers/net/wireless/ath/wcn36xx/dxe.c | 49 +-
drivers/net/wireless/ath/wcn36xx/main.c | 34 +-
drivers/net/wireless/ath/wcn36xx/smd.c | 8 +-
drivers/net/wireless/ath/wcn36xx/txrx.c | 41 +-
drivers/net/wireless/ath/wcn36xx/wcn36xx.h | 1 +
drivers/net/wireless/intel/iwlwifi/iwl-drv.c | 17 +-
.../net/wireless/intel/iwlwifi/mvm/ftm-initiator.c | 2 +-
drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c | 17 +
drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c | 27 +
drivers/net/wireless/intel/iwlwifi/mvm/scan.c | 2 +-
.../net/wireless/intel/iwlwifi/mvm/time-event.c | 27 +-
drivers/net/wireless/intel/iwlwifi/pcie/rx.c | 7 +-
drivers/net/wireless/intel/iwlwifi/queue/tx.c | 1 +
drivers/net/wireless/marvell/mwifiex/sta_event.c | 8 +-
drivers/net/wireless/marvell/mwifiex/usb.c | 3 +-
drivers/net/wireless/realtek/rtw88/main.c | 2 +-
drivers/net/wireless/realtek/rtw88/rtw8821c.h | 2 +-
drivers/net/wireless/realtek/rtw88/rtw8822b.c | 2 +-
drivers/net/wireless/realtek/rtw88/rtw8822c.c | 2 +-
drivers/net/wireless/rsi/rsi_91x_main.c | 4 +
drivers/net/wireless/rsi/rsi_91x_usb.c | 9 +-
drivers/net/wireless/rsi/rsi_usb.h | 2 +
drivers/nvmem/core.c | 2 +
drivers/of/base.c | 11 +-
drivers/of/unittest.c | 21 +-
drivers/parisc/pdc_stable.c | 4 +-
drivers/pci/controller/pci-aardvark.c | 4 +-
drivers/pci/controller/pci-mvebu.c | 8 +
drivers/pci/controller/pci-xgene.c | 2 +-
drivers/pci/hotplug/pciehp.h | 3 +
drivers/pci/hotplug/pciehp_core.c | 2 +-
drivers/pci/hotplug/pciehp_hpc.c | 28 +-
drivers/pci/msi.c | 26 +-
drivers/pci/pci-bridge-emul.c | 70 +-
drivers/pci/quirks.c | 3 +
drivers/pcmcia/cs.c | 8 +-
drivers/pcmcia/rsrc_nonstatic.c | 6 +
drivers/phy/socionext/phy-uniphier-usb3ss.c | 10 +-
drivers/power/reset/mt6323-poweroff.c | 3 +
drivers/regulator/qcom_smd-regulator.c | 100 ++-
drivers/rpmsg/rpmsg_core.c | 20 +-
drivers/rtc/rtc-cmos.c | 3 +
drivers/rtc/rtc-pxa.c | 4 +
drivers/scsi/lpfc/lpfc.h | 2 +-
drivers/scsi/lpfc/lpfc_attr.c | 62 +-
drivers/scsi/lpfc/lpfc_hbadisc.c | 8 +-
drivers/scsi/lpfc/lpfc_sli.c | 6 -
drivers/scsi/pm8001/pm8001_hwi.c | 4 +-
drivers/scsi/scsi_debugfs.c | 1 +
drivers/scsi/scsi_pm.c | 2 +-
drivers/scsi/sr.c | 2 +-
drivers/scsi/sr_vendor.c | 4 +-
drivers/scsi/ufs/tc-dwc-g210-pci.c | 1 -
drivers/scsi/ufs/ufshcd-pci.c | 2 -
drivers/scsi/ufs/ufshcd-pltfrm.c | 2 -
drivers/scsi/ufs/ufshcd.c | 7 +
drivers/soc/mediatek/mtk-scpsys.c | 15 +-
drivers/soc/qcom/cpr.c | 2 +-
drivers/soc/ti/pruss.c | 2 +-
drivers/spi/spi-meson-spifc.c | 1 +
drivers/spi/spi-uniphier.c | 11 +-
drivers/staging/greybus/audio_topology.c | 15 +
drivers/staging/media/atomisp/i2c/ov2680.h | 24 -
drivers/staging/media/atomisp/pci/atomisp_cmd.c | 92 +-
drivers/staging/media/atomisp/pci/atomisp_fops.c | 11 +
.../media/atomisp/pci/atomisp_gmin_platform.c | 2 +-
drivers/staging/media/atomisp/pci/atomisp_ioctl.c | 185 +++-
drivers/staging/media/atomisp/pci/atomisp_subdev.c | 15 +-
drivers/staging/media/atomisp/pci/atomisp_subdev.h | 3 +
drivers/staging/media/atomisp/pci/atomisp_v4l2.c | 13 +-
drivers/staging/media/atomisp/pci/atomisp_v4l2.h | 3 +-
drivers/staging/media/atomisp/pci/sh_css.c | 27 +-
drivers/staging/media/atomisp/pci/sh_css_mipi.c | 41 +-
drivers/staging/media/atomisp/pci/sh_css_params.c | 8 +-
drivers/staging/media/hantro/hantro_drv.c | 3 +-
drivers/staging/rtl8192e/rtllib.h | 2 +-
drivers/staging/rtl8192e/rtllib_module.c | 16 +-
drivers/staging/rtl8192e/rtllib_softmac.c | 6 +-
drivers/tee/tee_core.c | 4 +-
drivers/thermal/imx8mm_thermal.c | 3 +
drivers/thermal/imx_thermal.c | 145 ++--
drivers/thunderbolt/acpi.c | 13 +
drivers/tty/serial/amba-pl010.c | 3 -
drivers/tty/serial/amba-pl011.c | 27 +-
drivers/tty/serial/atmel_serial.c | 14 +
drivers/tty/serial/imx.c | 7 +-
drivers/tty/serial/serial_core.c | 7 +-
drivers/tty/serial/uartlite.c | 2 +-
drivers/uio/uio_dmem_genirq.c | 6 +-
drivers/usb/core/hub.c | 5 +-
drivers/usb/dwc3/dwc3-qcom.c | 7 +-
drivers/usb/gadget/function/f_fs.c | 4 +-
drivers/usb/host/uhci-platform.c | 3 +-
drivers/usb/misc/ftdi-elan.c | 1 +
drivers/vdpa/mlx5/net/mlx5_vnet.c | 2 -
drivers/video/backlight/qcom-wled.c | 122 +--
drivers/virtio/virtio_ring.c | 4 +-
drivers/w1/slaves/w1_ds28e04.c | 26 +-
drivers/xen/gntdev.c | 6 +-
fs/btrfs/backref.c | 21 +-
fs/btrfs/ctree.c | 19 +-
fs/btrfs/inode.c | 11 +
fs/btrfs/qgroup.c | 19 +
fs/debugfs/file.c | 2 +-
fs/dlm/lock.c | 9 +
fs/dlm/lowcomms.c | 45 +-
fs/ext4/ext4.h | 1 +
fs/ext4/ext4_jbd2.c | 2 +
fs/ext4/extents.c | 2 -
fs/ext4/fast_commit.c | 18 +-
fs/ext4/inode.c | 14 +-
fs/ext4/ioctl.c | 2 -
fs/ext4/mballoc.c | 48 +-
fs/ext4/migrate.c | 23 +-
fs/ext4/super.c | 27 +-
fs/f2fs/compress.c | 50 +-
fs/f2fs/f2fs.h | 11 +
fs/f2fs/gc.c | 3 +
fs/f2fs/segment.h | 3 +-
fs/f2fs/super.c | 44 +
fs/f2fs/sysfs.c | 4 +-
fs/fuse/file.c | 2 +-
fs/jffs2/file.c | 40 +-
fs/ubifs/super.c | 1 -
fs/udf/ialloc.c | 2 +
include/acpi/acpi_bus.h | 5 +-
include/acpi/actypes.h | 10 +-
include/linux/blk-pm.h | 2 +-
include/linux/bpf_verifier.h | 7 +
include/linux/clocksource.h | 3 +
include/linux/hid.h | 2 +
include/linux/mmzone.h | 9 +
include/linux/pm_runtime.h | 3 +
include/net/inet_frag.h | 11 +-
include/net/ipv6_frag.h | 3 +-
include/net/sch_generic.h | 5 +
include/net/xfrm.h | 5 +
include/trace/events/cgroup.h | 12 +-
include/uapi/linux/xfrm.h | 1 +
kernel/audit.c | 18 +-
kernel/bpf/btf.c | 3 +-
kernel/bpf/verifier.c | 18 +-
kernel/dma/pool.c | 4 +-
kernel/rcu/tree_exp.h | 1 +
kernel/sched/cputime.c | 4 +-
kernel/sched/fair.c | 4 +-
kernel/sched/rt.c | 23 +-
kernel/time/clocksource.c | 96 ++-
kernel/time/jiffies.c | 15 +-
kernel/trace/bpf_trace.c | 6 +-
kernel/trace/trace_kprobe.c | 5 +-
kernel/tsacct.c | 7 +-
lib/mpi/mpi-mod.c | 2 +
lib/test_hmm.c | 24 +
lib/test_meminit.c | 1 +
mm/hmm.c | 5 +-
mm/page_alloc.c | 19 +-
mm/shmem.c | 37 +-
net/ax25/af_ax25.c | 10 +-
net/batman-adv/netlink.c | 30 +-
net/bluetooth/cmtp/core.c | 4 +-
net/bluetooth/hci_core.c | 1 +
net/bluetooth/hci_event.c | 8 +-
net/bluetooth/hci_request.c | 2 +-
net/bluetooth/l2cap_sock.c | 45 +-
net/bridge/br_netfilter_hooks.c | 7 +-
net/core/dev.c | 6 +
net/core/devlink.c | 2 -
net/core/filter.c | 8 +-
net/core/net-sysfs.c | 3 +
net/core/net_namespace.c | 4 +-
net/ipv4/fib_semantics.c | 47 +-
net/ipv4/inet_fragment.c | 8 +-
net/ipv4/ip_fragment.c | 3 +-
net/ipv4/ip_gre.c | 5 +-
net/ipv4/netfilter/ipt_CLUSTERIP.c | 5 +-
net/ipv6/ip6_gre.c | 5 +-
net/mac80211/rx.c | 2 +-
net/netfilter/nft_set_pipapo.c | 8 +
net/netrom/af_netrom.c | 12 +-
net/nfc/llcp_sock.c | 5 +
net/sched/sch_generic.c | 1 +
net/smc/smc_core.c | 17 +-
net/unix/garbage.c | 14 +-
net/unix/scm.c | 6 +-
net/xfrm/xfrm_compat.c | 6 +-
net/xfrm/xfrm_interface.c | 14 +-
net/xfrm/xfrm_policy.c | 24 +-
net/xfrm/xfrm_state.c | 23 +-
net/xfrm/xfrm_user.c | 41 +-
scripts/dtc/dtx_diff | 8 +-
scripts/sphinx-pre-install | 3 +
security/selinux/hooks.c | 12 +-
sound/core/jack.c | 3 +
sound/core/oss/pcm_oss.c | 2 +-
sound/core/pcm.c | 6 +-
sound/core/seq/seq_queue.c | 14 +-
sound/pci/hda/hda_codec.c | 3 +
sound/soc/codecs/rt5663.c | 12 +-
sound/soc/fsl/fsl_asrc.c | 69 +-
sound/soc/fsl/fsl_mqs.c | 2 +-
sound/soc/intel/catpt/dsp.c | 14 +-
sound/soc/mediatek/mt8173/mt8173-max98090.c | 3 +
sound/soc/mediatek/mt8173/mt8173-rt5650-rt5514.c | 2 +
sound/soc/mediatek/mt8173/mt8173-rt5650-rt5676.c | 2 +
sound/soc/mediatek/mt8173/mt8173-rt5650.c | 2 +
sound/soc/mediatek/mt8183/mt8183-da7219-max98357.c | 6 +-
.../mt8183/mt8183-mt6358-ts3a227-max98357.c | 7 +-
sound/soc/samsung/idma.c | 2 +
sound/soc/uniphier/Kconfig | 2 -
sound/usb/format.c | 2 +-
sound/usb/mixer_quirks.c | 2 +-
sound/usb/quirks.c | 2 +-
tools/bpf/bpftool/Documentation/Makefile | 1 -
tools/bpf/bpftool/Makefile | 1 -
tools/bpf/bpftool/main.c | 2 +
tools/include/nolibc/nolibc.h | 33 +-
tools/lib/bpf/libbpf.c | 4 +
tools/perf/util/debug.c | 2 +-
tools/perf/util/evsel.c | 25 +-
tools/perf/util/probe-event.c | 3 +
tools/testing/selftests/bpf/prog_tests/skb_ctx.c | 2 +
tools/testing/selftests/clone3/clone3.c | 6 +
.../selftests/ftrace/test.d/kprobe/profile.tc | 2 +-
tools/testing/selftests/kselftest_harness.h | 2 +-
.../selftests/powerpc/security/spectre_v2.c | 2 +-
tools/testing/selftests/vm/hmm-tests.c | 42 +
546 files changed, 5569 insertions(+), 3345 deletions(-)
From: Yifeng Li <[email protected]>
commit e445375882883f69018aa669b67cbb37ec873406 upstream.
Like other SATA controller chips in the Marvell 88SE91xx series, the
Marvell 88SE9125 has the same DMA requester ID hardware bug that prevents
it from working under IOMMU. Add it to the list of devices that need the
quirk.
Without this patch, device initialization fails with DMA errors:
ata8: softreset failed (1st FIS failed)
DMAR: DRHD: handling fault status reg 2
DMAR: [DMA Write NO_PASID] Request device [03:00.1] fault addr 0xfffc0000 [fault reason 0x02] Present bit in context entry is clear
DMAR: DRHD: handling fault status reg 2
DMAR: [DMA Read NO_PASID] Request device [03:00.1] fault addr 0xfffc0000 [fault reason 0x02] Present bit in context entry is clear
After applying the patch, the controller can be successfully initialized:
ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 330)
ata8.00: ATAPI: PIONEER BD-RW BDR-207M, 1.21, max UDMA/100
ata8.00: configured for UDMA/100
scsi 7:0:0:0: CD-ROM PIONEER BD-RW BDR-207M 1.21 PQ: 0 ANSI: 5
Link: https://lore.kernel.org/r/YahpKVR+McJVDdkD@work
Reported-by: Sam Bingner <[email protected]>
Tested-by: Sam Bingner <[email protected]>
Tested-by: Yifeng Li <[email protected]>
Signed-off-by: Yifeng Li <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Reviewed-by: Krzysztof Wilczyński <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/quirks.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -4077,6 +4077,9 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_M
quirk_dma_func1_alias);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9123,
quirk_dma_func1_alias);
+/* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c136 */
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9125,
+ quirk_dma_func1_alias);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9128,
quirk_dma_func1_alias);
/* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c14 */
From: Christophe Leroy <[email protected]>
commit bc93a22a19eb2b68a16ecf04cdf4b2ed65aaf398 upstream.
On a kernel without CONFIG_STRICT_KERNEL_RWX, running EXEC_RODATA
test leads to "Illegal instruction" failure.
Looking at the content of rodata_objcopy.o, we see that the
function content zeroes only:
Disassembly of section .rodata:
0000000000000000 <.lkdtm_rodata_do_nothing>:
0: 00 00 00 00 .long 0x0
Add the contents flag in order to keep the content of the section
while renaming it.
Disassembly of section .rodata:
0000000000000000 <.lkdtm_rodata_do_nothing>:
0: 4e 80 00 20 blr
Fixes: e9e08a07385e ("lkdtm: support llvm-objcopy")
Cc: [email protected]
Cc: Kees Cook <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Nick Desaulniers <[email protected]>
Cc: Nathan Chancellor <[email protected]>
Signed-off-by: Christophe Leroy <[email protected]>
Reviewed-by: Nick Desaulniers <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
Link: https://lore.kernel.org/r/8900731fbc05fb8b0de18af7133a8fc07c3c53a1.1633712176.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/misc/lkdtm/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/misc/lkdtm/Makefile
+++ b/drivers/misc/lkdtm/Makefile
@@ -16,7 +16,7 @@ KCOV_INSTRUMENT_rodata.o := n
OBJCOPYFLAGS :=
OBJCOPYFLAGS_rodata_objcopy.o := \
- --rename-section .noinstr.text=.rodata,alloc,readonly,load
+ --rename-section .noinstr.text=.rodata,alloc,readonly,load,contents
targets += rodata.o rodata_objcopy.o
$(obj)/rodata_objcopy.o: $(obj)/rodata.o FORCE
$(call if_changed,objcopy)
From: Ammar Faizi <[email protected]>
commit 937ed91c712273131de6d2a02caafd3ee84e0c72 upstream.
Before this patch, the `_start` function looks like this:
```
0000000000001170 <_start>:
1170: pop %rdi
1171: mov %rsp,%rsi
1174: lea 0x8(%rsi,%rdi,8),%rdx
1179: and $0xfffffffffffffff0,%rsp
117d: sub $0x8,%rsp
1181: call 1000 <main>
1186: movzbq %al,%rdi
118a: mov $0x3c,%rax
1191: syscall
1193: hlt
1194: data16 cs nopw 0x0(%rax,%rax,1)
119f: nop
```
Note the "and" to %rsp with $-16, it makes the %rsp be 16-byte aligned,
but then there is a "sub" with $0x8 which makes the %rsp no longer
16-byte aligned, then it calls main. That's the bug!
What actually the x86-64 System V ABI mandates is that right before the
"call", the %rsp must be 16-byte aligned, not after the "call". So the
"sub" with $0x8 here breaks the alignment. Remove it.
An example where this rule matters is when the callee needs to align
its stack at 16-byte for aligned move instruction, like `movdqa` and
`movaps`. If the callee can't align its stack properly, it will result
in segmentation fault.
x86-64 System V ABI also mandates the deepest stack frame should be
zero. Just to be safe, let's zero the %rbp on startup as the content
of %rbp may be unspecified when the program starts. Now it looks like
this:
```
0000000000001170 <_start>:
1170: pop %rdi
1171: mov %rsp,%rsi
1174: lea 0x8(%rsi,%rdi,8),%rdx
1179: xor %ebp,%ebp # zero the %rbp
117b: and $0xfffffffffffffff0,%rsp # align the %rsp
117f: call 1000 <main>
1184: movzbq %al,%rdi
1188: mov $0x3c,%rax
118f: syscall
1191: hlt
1192: data16 cs nopw 0x0(%rax,%rax,1)
119d: nopl (%rax)
```
Cc: Bedirhan KURT <[email protected]>
Cc: Louvian Lyndal <[email protected]>
Reported-by: Peter Cordes <[email protected]>
Signed-off-by: Ammar Faizi <[email protected]>
[wt: I did this on purpose due to a misunderstanding of the spec, other
archs will thus have to be rechecked, particularly i386]
Cc: [email protected]
Signed-off-by: Willy Tarreau <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/include/nolibc/nolibc.h | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
--- a/tools/include/nolibc/nolibc.h
+++ b/tools/include/nolibc/nolibc.h
@@ -422,14 +422,20 @@ struct stat {
})
/* startup code */
+/*
+ * x86-64 System V ABI mandates:
+ * 1) %rsp must be 16-byte aligned right before the function call.
+ * 2) The deepest stack frame should be zero (the %rbp).
+ *
+ */
asm(".section .text\n"
".global _start\n"
"_start:\n"
"pop %rdi\n" // argc (first arg, %rdi)
"mov %rsp, %rsi\n" // argv[] (second arg, %rsi)
"lea 8(%rsi,%rdi,8),%rdx\n" // then a NULL then envp (third arg, %rdx)
- "and $-16, %rsp\n" // x86 ABI : esp must be 16-byte aligned when
- "sub $8, %rsp\n" // entering the callee
+ "xor %ebp, %ebp\n" // zero the stack frame
+ "and $-16, %rsp\n" // x86 ABI : esp must be 16-byte aligned before call
"call main\n" // main() returns the status code, we'll exit with it.
"movzb %al, %rdi\n" // retrieve exit code from 8 lower bits
"mov $60, %rax\n" // NR_exit == 60
From: Dan Carpenter <[email protected]>
[ Upstream commit 189723fbe9aca18d6f7d638c59a40288030932b5 ]
The "label" pointer is used for debug output. The code assumes that it
is either NULL or valid, but it is never set to NULL. It is either
valid or uninitialized.
Fixes: 0c275c30176b ("drm/bridge: Add bridge driver for display connectors")
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Sam Ravnborg <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20211013080825.GE6010@kili
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/bridge/display-connector.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/bridge/display-connector.c b/drivers/gpu/drm/bridge/display-connector.c
index 4d278573cdb99..544a47335cac4 100644
--- a/drivers/gpu/drm/bridge/display-connector.c
+++ b/drivers/gpu/drm/bridge/display-connector.c
@@ -104,7 +104,7 @@ static int display_connector_probe(struct platform_device *pdev)
{
struct display_connector *conn;
unsigned int type;
- const char *label;
+ const char *label = NULL;
int ret;
conn = devm_kzalloc(&pdev->dev, sizeof(*conn), GFP_KERNEL);
--
2.34.1
From: Tsuchiya Yuto <[email protected]>
[ Upstream commit e1921cd14640f0f4d1fad5eb8e448c58a536415d ]
When config.mode is IA_CSS_INPUT_MODE_BUFFERED_SENSOR, it rather needs
buffers. Fix it by inverting the return value.
Fixes: 3c0538fbad9f ("media: atomisp: get rid of most checks for ISP2401 version")
Signed-off-by: Tsuchiya Yuto <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/staging/media/atomisp/pci/sh_css_mipi.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/staging/media/atomisp/pci/sh_css_mipi.c b/drivers/staging/media/atomisp/pci/sh_css_mipi.c
index d5ae7f0b5864b..e18c0cfb4ce3a 100644
--- a/drivers/staging/media/atomisp/pci/sh_css_mipi.c
+++ b/drivers/staging/media/atomisp/pci/sh_css_mipi.c
@@ -389,17 +389,17 @@ static bool buffers_needed(struct ia_css_pipe *pipe)
{
if (!IS_ISP2401) {
if (pipe->stream->config.mode == IA_CSS_INPUT_MODE_BUFFERED_SENSOR)
- return false;
- else
return true;
+ else
+ return false;
}
if (pipe->stream->config.mode == IA_CSS_INPUT_MODE_BUFFERED_SENSOR ||
pipe->stream->config.mode == IA_CSS_INPUT_MODE_TPG ||
pipe->stream->config.mode == IA_CSS_INPUT_MODE_PRBS)
- return false;
+ return true;
- return true;
+ return false;
}
int
--
2.34.1
From: Baoquan He <[email protected]>
commit c4dc63f0032c77464fbd4e7a6afc22fa6913c4a7 upstream.
In kdump kernel of x86_64, page allocation failure is observed:
kworker/u2:2: page allocation failure: order:0, mode:0xcc1(GFP_KERNEL|GFP_DMA), nodemask=(null),cpuset=/,mems_allowed=0
CPU: 0 PID: 55 Comm: kworker/u2:2 Not tainted 5.16.0-rc4+ #5
Hardware name: AMD Dinar/Dinar, BIOS RDN1505B 06/05/2013
Workqueue: events_unbound async_run_entry_fn
Call Trace:
<TASK>
dump_stack_lvl+0x48/0x5e
warn_alloc.cold+0x72/0xd6
__alloc_pages_slowpath.constprop.0+0xc69/0xcd0
__alloc_pages+0x1df/0x210
new_slab+0x389/0x4d0
___slab_alloc+0x58f/0x770
__slab_alloc.constprop.0+0x4a/0x80
kmem_cache_alloc_trace+0x24b/0x2c0
sr_probe+0x1db/0x620
......
device_add+0x405/0x920
......
__scsi_add_device+0xe5/0x100
ata_scsi_scan_host+0x97/0x1d0
async_run_entry_fn+0x30/0x130
process_one_work+0x1e8/0x3c0
worker_thread+0x50/0x3b0
? rescuer_thread+0x350/0x350
kthread+0x16b/0x190
? set_kthread_struct+0x40/0x40
ret_from_fork+0x22/0x30
</TASK>
Mem-Info:
......
The above failure happened when calling kmalloc() to allocate buffer with
GFP_DMA. It requests to allocate slab page from DMA zone while no managed
pages at all in there.
sr_probe()
--> get_capabilities()
--> buffer = kmalloc(512, GFP_KERNEL | GFP_DMA);
Because in the current kernel, dma-kmalloc will be created as long as
CONFIG_ZONE_DMA is enabled. However, kdump kernel of x86_64 doesn't have
managed pages on DMA zone since commit 6f599d84231f ("x86/kdump: Always
reserve the low 1M when the crashkernel option is specified"). The
failure can be always reproduced.
For now, let's mute the warning of allocation failure if requesting pages
from DMA zone while no managed pages.
[[email protected]: fix warning]
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 6f599d84231f ("x86/kdump: Always reserve the low 1M when the crashkernel option is specified")
Signed-off-by: Baoquan He <[email protected]>
Acked-by: John Donnelly <[email protected]>
Reviewed-by: Hyeonggon Yoo <[email protected]>
Cc: Christoph Lameter <[email protected]>
Cc: Pekka Enberg <[email protected]>
Cc: David Rientjes <[email protected]>
Cc: Joonsoo Kim <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: David Laight <[email protected]>
Cc: Marek Szyprowski <[email protected]>
Cc: Robin Murphy <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/page_alloc.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -3964,7 +3964,9 @@ void warn_alloc(gfp_t gfp_mask, nodemask
va_list args;
static DEFINE_RATELIMIT_STATE(nopage_rs, 10*HZ, 1);
- if ((gfp_mask & __GFP_NOWARN) || !__ratelimit(&nopage_rs))
+ if ((gfp_mask & __GFP_NOWARN) ||
+ !__ratelimit(&nopage_rs) ||
+ ((gfp_mask & __GFP_DMA) && !has_managed_dma()))
return;
va_start(args, fmt);
From: Alexander Aring <[email protected]>
[ Upstream commit feb704bd17786c8ff52a49d7759b8ee4f3a5aaac ]
Instead of dereference "con->sock" we can get the socket structure over
"sk->sk_socket" as well. This patch will switch to this behaviour.
Signed-off-by: Alexander Aring <[email protected]>
Signed-off-by: David Teigland <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/dlm/lowcomms.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/fs/dlm/lowcomms.c b/fs/dlm/lowcomms.c
index 0c78fdfb1f6fa..0a8645ed4b2d6 100644
--- a/fs/dlm/lowcomms.c
+++ b/fs/dlm/lowcomms.c
@@ -480,8 +480,7 @@ static void lowcomms_error_report(struct sock *sk)
goto out;
orig_report = listen_sock.sk_error_report;
- if (con->sock == NULL ||
- kernel_getpeername(con->sock, (struct sockaddr *)&saddr) < 0) {
+ if (kernel_getpeername(sk->sk_socket, (struct sockaddr *)&saddr) < 0) {
printk_ratelimited(KERN_ERR "dlm: node %d: socket error "
"sending to node %d, port %d, "
"sk_err=%d/%d\n", dlm_our_nodeid(),
--
2.34.1
From: Brian Norris <[email protected]>
[ Upstream commit 251888398753924059f3bb247a44153a2853137f ]
Our probe() function never enabled this clock, so we shouldn't disable
it if we fail to probe the bridge.
Noted by inspection.
Fixes: 2d4f7bdafd70 ("drm/rockchip: dsi: migrate to use dw-mipi-dsi bridge driver")
Signed-off-by: Brian Norris <[email protected]>
Reviewed-by: Chen-Yu Tsai <[email protected]>
Tested-by: Nícolas F. R. A. Prado <[email protected]>
Signed-off-by: Heiko Stuebner <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20210928143413.v3.3.Ie8ceefb51ab6065a1151869b6fcda41a467d4d2c@changeid
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c | 6 +-----
1 file changed, 1 insertion(+), 5 deletions(-)
diff --git a/drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c b/drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c
index d0c9610ad2202..433b2f459a7d9 100644
--- a/drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c
+++ b/drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c
@@ -1126,14 +1126,10 @@ static int dw_mipi_dsi_rockchip_probe(struct platform_device *pdev)
if (ret != -EPROBE_DEFER)
DRM_DEV_ERROR(dev,
"Failed to probe dw_mipi_dsi: %d\n", ret);
- goto err_clkdisable;
+ return ret;
}
return 0;
-
-err_clkdisable:
- clk_disable_unprepare(dsi->pllref_clk);
- return ret;
}
static int dw_mipi_dsi_rockchip_remove(struct platform_device *pdev)
--
2.34.1
From: Pavel Skripkin <[email protected]>
[ Upstream commit 3a56ef719f0b9682afb8a86d64b2399e36faa4e6 ]
Syzbot reported slab-out-of-bounds read in hci_le_adv_report_evt(). The
problem was in missing validaion check.
We should check if data is not malicious and we can read next data block.
If we won't check ptr validness, code can read a way beyond skb->end and
it can cause problems, of course.
Fixes: e95beb414168 ("Bluetooth: hci_le_adv_report_evt code refactoring")
Reported-and-tested-by: [email protected]
Signed-off-by: Pavel Skripkin <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/bluetooth/hci_event.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index 9f52145bb7b76..7ffcca9ae82a1 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -5661,7 +5661,8 @@ static void hci_le_adv_report_evt(struct hci_dev *hdev, struct sk_buff *skb)
struct hci_ev_le_advertising_info *ev = ptr;
s8 rssi;
- if (ev->length <= HCI_MAX_AD_LENGTH) {
+ if (ev->length <= HCI_MAX_AD_LENGTH &&
+ ev->data + ev->length <= skb_tail_pointer(skb)) {
rssi = ev->data[ev->length];
process_adv_report(hdev, ev->evt_type, &ev->bdaddr,
ev->bdaddr_type, NULL, 0, rssi,
@@ -5671,6 +5672,11 @@ static void hci_le_adv_report_evt(struct hci_dev *hdev, struct sk_buff *skb)
}
ptr += sizeof(*ev) + ev->length + 1;
+
+ if (ptr > (void *) skb_tail_pointer(skb) - sizeof(*ev)) {
+ bt_dev_err(hdev, "Malicious advertising data. Stopping processing");
+ break;
+ }
}
hci_dev_unlock(hdev);
--
2.34.1
From: Maxime Ripard <[email protected]>
[ Upstream commit 3e85b81591609bb794bb00cd619b20965b5b38cd ]
When the firmware doesn't setup the HSM rate (such as when booting
without an HDMI cable plugged in), its rate is 0 and thus any register
access results in a CPU stall, even though HSM is enabled.
Let's enforce a minimum rate at boot to avoid this issue.
Fixes: 4f6e3d66ac52 ("drm/vc4: Add runtime PM support to the HDMI encoder driver")
Signed-off-by: Maxime Ripard <[email protected]>
Reviewed-by: Nicolas Saenz Julienne <[email protected]>
Tested-by: Nicolas Saenz Julienne <[email protected]>
Tested-by: Michael Stapelberg <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/vc4/vc4_hdmi.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index ee293f061f0a8..5d5c4e9a86218 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -79,6 +79,7 @@
# define VC4_HD_M_SW_RST BIT(2)
# define VC4_HD_M_ENABLE BIT(0)
+#define HSM_MIN_CLOCK_FREQ 120000000
#define CEC_CLOCK_FREQ 40000
#define VC4_HSM_MID_CLOCK 149985000
@@ -1806,6 +1807,19 @@ static int vc4_hdmi_bind(struct device *dev, struct device *master, void *data)
vc4_hdmi->disable_wifi_frequencies =
of_property_read_bool(dev->of_node, "wifi-2.4ghz-coexistence");
+ /*
+ * If we boot without any cable connected to the HDMI connector,
+ * the firmware will skip the HSM initialization and leave it
+ * with a rate of 0, resulting in a bus lockup when we're
+ * accessing the registers even if it's enabled.
+ *
+ * Let's put a sensible default at runtime_resume so that we
+ * don't end up in this situation.
+ */
+ ret = clk_set_min_rate(vc4_hdmi->hsm_clock, HSM_MIN_CLOCK_FREQ);
+ if (ret)
+ goto err_put_ddc;
+
if (vc4_hdmi->variant->reset)
vc4_hdmi->variant->reset(vc4_hdmi);
--
2.34.1
From: Christian Hewitt <[email protected]>
[ Upstream commit 8182a35868db5f053111d5d9d4da8fcb3f99259d ]
Mark the VDDIO_AO18 regulator always-on and set hdmi-supply for the hdmi_tx
node to ensure HDMI is powered in the early stages of boot.
Fixes: fb72c03e0e32 ("ARM64: dts: meson-gxbb-wetek: add a wetek specific dtsi to cleanup hub and play2")
Signed-off-by: Christian Hewitt <[email protected]>
Reviewed-by: Neil Armstrong <[email protected]>
Signed-off-by: Neil Armstrong <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
index a350fee1264d7..8e2af986cebaf 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
@@ -64,6 +64,7 @@
regulator-name = "VDDIO_AO18";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
+ regulator-always-on;
};
vcc_3v3: regulator-vcc_3v3 {
@@ -161,6 +162,7 @@
status = "okay";
pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
pinctrl-names = "default";
+ hdmi-supply = <&vddio_ao18>;
};
&hdmi_tx_tmds_port {
--
2.34.1
From: Tsuchiya Yuto <[email protected]>
[ Upstream commit 5a1b2725558f8a3b4cbf0504f53cffae8e163034 ]
## `if (pipe->stream->config.mode == IA_CSS_INPUT_MODE_TPG) {` case
The intel-aero atomisp has `#if defined(IS_ISP_2400_SYSTEM)` [1]. It is
to be defined in the following two places [2]:
- css/hive_isp_css_common/system_global.h
- css/css_2401_csi2p_system/system_global.h
and the former file is to be included on ISP2400 devices, too. So, it
is to be defined for both ISP2400 and ISP2401 devices.
Because the upstreamed atomisp driver now supports only ISP2400 and
ISP2401, just remove the ISP version test again. This matches the other
upstream commits like 3c0538fbad9f ("media: atomisp: get rid of most
checks for ISP2401 version").
While here, moved the comment for define GP_ISEL_TPG_MODE to the
appropriate place.
[1] https://github.com/intel-aero/linux-kernel/blob/a1b673258feb915268377275130c5c5df0eafc82/drivers/media/pci/atomisp/css/sh_css.c#L552-L558
[2] https://github.com/intel-aero/linux-kernel/search?q=IS_ISP_2400_SYSTEM
## `isys_stream_descr->polling_mode` case
This does not exist on the intel-aero atomisp. This is because it is
based on css version irci_stable_candrpv_0415_20150521_0458.
On the other hand, the upstreamed atomisp is based on the following css
version depending on the ISP version using ifdefs:
- ISP2400: irci_stable_candrpv_0415_20150521_0458
- ISP2401: irci_master_20150911_0724
The `isys_stream_descr->polling_mode` usage was added on updating css
version to irci_master_20150701_0213 [3].
So, it is not a ISP version specific thing, but css version specific
thing. Because the upstreamed atomisp driver uses irci_master_20150911_0724
for ISP2401, re-add the ISP version check for now.
I say "for now" because ISP2401 should eventually use the same css
version with ISP2400 (i.e., irci_stable_candrpv_0415_20150521_0458)
[3] https://raw.githubusercontent.com/intel/ProductionKernelQuilts/cht-m1stable-2016_ww31/uefi/cht-m1stable/patches/cam-0439-atomisp2-css2401-and-2401_legacy-irci_master_2015070.patch
("atomisp2: css2401 and 2401_legacy-irci_master_20150701_0213")
Link to Intel's Android kernel patch.
## `coord = &me->config.internal_frame_origin_bqs_on_sctbl;` case
it was added on commit 4f744a573db3 ("media: atomisp: make
sh_css_sp_init_pipeline() ISP version independent") for ISP2401. Because
the upstreamed atomisp for the ISP2401 part is based on
irci_master_20150911_0724, hence the difference.
Because the upstreamed atomisp driver uses irci_master_20150911_0724
for ISP2401, revert the test back to `if (IS_ISP2401)`.
Fixes: 27333dadef57 ("media: atomisp: adjust some code at sh_css that could be broken")
Signed-off-by: Tsuchiya Yuto <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/staging/media/atomisp/pci/sh_css.c | 27 +++++++++-------------
1 file changed, 11 insertions(+), 16 deletions(-)
diff --git a/drivers/staging/media/atomisp/pci/sh_css.c b/drivers/staging/media/atomisp/pci/sh_css.c
index ddee04c8248d0..54a18921fbd15 100644
--- a/drivers/staging/media/atomisp/pci/sh_css.c
+++ b/drivers/staging/media/atomisp/pci/sh_css.c
@@ -527,6 +527,7 @@ ia_css_stream_input_format_bits_per_pixel(struct ia_css_stream *stream)
return bpp;
}
+/* TODO: move define to proper file in tools */
#define GP_ISEL_TPG_MODE 0x90058
#if !defined(ISP2401)
@@ -579,12 +580,8 @@ sh_css_config_input_network(struct ia_css_stream *stream) {
vblank_cycles = vblank_lines * (width + hblank_cycles);
sh_css_sp_configure_sync_gen(width, height, hblank_cycles,
vblank_cycles);
- if (!IS_ISP2401) {
- if (pipe->stream->config.mode == IA_CSS_INPUT_MODE_TPG) {
- /* TODO: move define to proper file in tools */
- ia_css_device_store_uint32(GP_ISEL_TPG_MODE, 0);
- }
- }
+ if (pipe->stream->config.mode == IA_CSS_INPUT_MODE_TPG)
+ ia_css_device_store_uint32(GP_ISEL_TPG_MODE, 0);
}
ia_css_debug_dtrace(IA_CSS_DEBUG_TRACE_PRIVATE,
"sh_css_config_input_network() leave:\n");
@@ -1019,16 +1016,14 @@ static bool sh_css_translate_stream_cfg_to_isys_stream_descr(
* ia_css_isys_stream_capture_indication() instead of
* ia_css_pipeline_sp_wait_for_isys_stream_N() as isp processing of
* capture takes longer than getting an ISYS frame
- *
- * Only 2401 relevant ??
*/
-#if 0 // FIXME: NOT USED on Yocto Aero
- isys_stream_descr->polling_mode
- = early_polling ? INPUT_SYSTEM_POLL_ON_CAPTURE_REQUEST
- : INPUT_SYSTEM_POLL_ON_WAIT_FOR_FRAME;
- ia_css_debug_dtrace(IA_CSS_DEBUG_TRACE_PRIVATE,
- "sh_css_translate_stream_cfg_to_isys_stream_descr() leave:\n");
-#endif
+ if (IS_ISP2401) {
+ isys_stream_descr->polling_mode
+ = early_polling ? INPUT_SYSTEM_POLL_ON_CAPTURE_REQUEST
+ : INPUT_SYSTEM_POLL_ON_WAIT_FOR_FRAME;
+ ia_css_debug_dtrace(IA_CSS_DEBUG_TRACE_PRIVATE,
+ "sh_css_translate_stream_cfg_to_isys_stream_descr() leave:\n");
+ }
return rc;
}
@@ -1451,7 +1446,7 @@ static void start_pipe(
assert(me); /* all callers are in this file and call with non null argument */
- if (!IS_ISP2401) {
+ if (IS_ISP2401) {
coord = &me->config.internal_frame_origin_bqs_on_sctbl;
params = me->stream->isp_params_configs;
}
--
2.34.1
From: Jens Wiklander <[email protected]>
[ Upstream commit f18397ab3ae23e8e43bba9986e66af6d4497f2ad ]
Prior to this patch was teedev_close_context() calling tee_device_put()
before teedev_ctx_put() leading to teedev_ctx_release() accessing
ctx->teedev just after the reference counter was decreased on the
teedev. Fix this by calling teedev_ctx_put() before tee_device_put().
Fixes: 217e0250cccb ("tee: use reference counting for tee_context")
Reviewed-by: Sumit Garg <[email protected]>
Signed-off-by: Jens Wiklander <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/tee/tee_core.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/tee/tee_core.c b/drivers/tee/tee_core.c
index 6ade4a5c48407..dfc239c64ce3c 100644
--- a/drivers/tee/tee_core.c
+++ b/drivers/tee/tee_core.c
@@ -98,8 +98,10 @@ void teedev_ctx_put(struct tee_context *ctx)
static void teedev_close_context(struct tee_context *ctx)
{
- tee_device_put(ctx->teedev);
+ struct tee_device *teedev = ctx->teedev;
+
teedev_ctx_put(ctx);
+ tee_device_put(teedev);
}
static int tee_open(struct inode *inode, struct file *filp)
--
2.34.1
From: Johan Hovold <[email protected]>
commit f71d272ad4e354097020a4e6b1dc6e4b59feb50f upstream.
USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.
Use the common control-message timeout define for the five-second
timeouts.
Fixes: 38f993ad8b1f ("V4L/DVB (8125): This driver adds support for the Sensoray 2255 devices.")
Cc: [email protected] # 2.6.27
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/usb/s2255/s2255drv.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/media/usb/s2255/s2255drv.c
+++ b/drivers/media/usb/s2255/s2255drv.c
@@ -1884,7 +1884,7 @@ static long s2255_vendor_req(struct s225
USB_TYPE_VENDOR | USB_RECIP_DEVICE |
USB_DIR_IN,
Value, Index, buf,
- TransferBufferLength, HZ * 5);
+ TransferBufferLength, USB_CTRL_SET_TIMEOUT);
if (r >= 0)
memcpy(TransferBuffer, buf, TransferBufferLength);
@@ -1893,7 +1893,7 @@ static long s2255_vendor_req(struct s225
r = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0),
Request, USB_TYPE_VENDOR | USB_RECIP_DEVICE,
Value, Index, buf,
- TransferBufferLength, HZ * 5);
+ TransferBufferLength, USB_CTRL_SET_TIMEOUT);
}
kfree(buf);
return r;
From: Michael Kuron <[email protected]>
commit f7b77ebe6d2f49c7747b2d619586d1aa33f9ea91 upstream.
This fixes a problem where closing the tuner would leave it in a state
where it would not tune to any channel when reopened. This problem was
discovered as part of https://github.com/hselasky/webcamd/issues/16.
Since adap->id is 0 or 1, this bit-shift overflows, which is undefined
behavior. The driver still worked in practice as the overflow would in
most environments result in 0, which rendered the line a no-op. When
running the driver as part of webcamd however, the overflow could lead
to 0xff due to optimizations by the compiler, which would, in the end,
improperly shut down the tuner.
The bug is a regression introduced in the commit referenced below. The
present patch causes identical behavior to before that commit for
adap->id equal to 0 or 1. The driver does not contain support for
dib0700 devices with more adapters, assuming such even exist.
Tests have been performed with the Xbox One Digital TV Tuner on amd64.
Not all dib0700 devices are expected to be affected by the regression;
this code path is only taken by those with incorrect endpoint numbers.
Link: https://lore.kernel.org/linux-media/1d2fc36d94ced6f67c7cc21dcc469d5e5bdd8201.1632689033.git.mchehab+huawei@kernel.org
Cc: [email protected]
Fixes: 7757ddda6f4f ("[media] DiB0700: add function to change I2C-speed")
Signed-off-by: Michael Kuron <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/usb/dvb-usb/dib0700_core.c | 2 --
1 file changed, 2 deletions(-)
--- a/drivers/media/usb/dvb-usb/dib0700_core.c
+++ b/drivers/media/usb/dvb-usb/dib0700_core.c
@@ -618,8 +618,6 @@ int dib0700_streaming_ctrl(struct dvb_us
deb_info("the endpoint number (%i) is not correct, use the adapter id instead", adap->fe_adap[0].stream.props.endpoint);
if (onoff)
st->channel_state |= 1 << (adap->id);
- else
- st->channel_state |= 1 << ~(adap->id);
} else {
if (onoff)
st->channel_state |= 1 << (adap->fe_adap[0].stream.props.endpoint-2);
From: Wang Hai <[email protected]>
[ Upstream commit 2a7ca7459d905febf519163bd9e3eed894de6bb7 ]
I got a kernel BUG report when doing fault injection test:
------------[ cut here ]------------
kernel BUG at lib/list_debug.c:45!
...
RIP: 0010:__list_del_entry_valid.cold+0x12/0x4d
...
Call Trace:
proto_unregister+0x83/0x220
cmtp_cleanup_sockets+0x37/0x40 [cmtp]
cmtp_exit+0xe/0x1f [cmtp]
do_syscall_64+0x35/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xae
If cmtp_init_sockets() in cmtp_init() fails, cmtp_init() still returns
success. This will cause a kernel bug when accessing uncreated ctmp
related data when the module exits.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Wang Hai <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/bluetooth/cmtp/core.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/net/bluetooth/cmtp/core.c b/net/bluetooth/cmtp/core.c
index 0a2d78e811cf5..83eb84e8e688f 100644
--- a/net/bluetooth/cmtp/core.c
+++ b/net/bluetooth/cmtp/core.c
@@ -501,9 +501,7 @@ static int __init cmtp_init(void)
{
BT_INFO("CMTP (CAPI Emulation) ver %s", VERSION);
- cmtp_init_sockets();
-
- return 0;
+ return cmtp_init_sockets();
}
static void __exit cmtp_exit(void)
--
2.34.1
From: Willy Tarreau <[email protected]>
commit de0244ae40ae91145faaf164a4252347607c3711 upstream.
Ammar Faizi reported that our exit code handling is wrong. We truncate
it to the lowest 8 bits but the syscall itself is expected to take a
regular 32-bit signed integer, not an unsigned char. It's the kernel
that later truncates it to the lowest 8 bits. The difference is visible
in strace, where the program below used to show exit(255) instead of
exit(-1):
int main(void)
{
return -1;
}
This patch applies the fix to all archs. x86_64, i386, arm64, armv7 and
mips were all tested and confirmed to work fine now. Risc-v was not
tested but the change is trivial and exactly the same as for other archs.
Reported-by: Ammar Faizi <[email protected]>
Cc: [email protected]
Signed-off-by: Willy Tarreau <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/include/nolibc/nolibc.h | 13 +++++--------
1 file changed, 5 insertions(+), 8 deletions(-)
--- a/tools/include/nolibc/nolibc.h
+++ b/tools/include/nolibc/nolibc.h
@@ -437,7 +437,7 @@ asm(".section .text\n"
"xor %ebp, %ebp\n" // zero the stack frame
"and $-16, %rsp\n" // x86 ABI : esp must be 16-byte aligned before call
"call main\n" // main() returns the status code, we'll exit with it.
- "movzb %al, %rdi\n" // retrieve exit code from 8 lower bits
+ "mov %eax, %edi\n" // retrieve exit code (32 bit)
"mov $60, %rax\n" // NR_exit == 60
"syscall\n" // really exit
"hlt\n" // ensure it does not return
@@ -625,9 +625,9 @@ asm(".section .text\n"
"push %ebx\n" // support both regparm and plain stack modes
"push %eax\n"
"call main\n" // main() returns the status code in %eax
- "movzbl %al, %ebx\n" // retrieve exit code from lower 8 bits
- "movl $1, %eax\n" // NR_exit == 1
- "int $0x80\n" // exit now
+ "mov %eax, %ebx\n" // retrieve exit code (32-bit int)
+ "movl $1, %eax\n" // NR_exit == 1
+ "int $0x80\n" // exit now
"hlt\n" // ensure it does not
"");
@@ -811,7 +811,6 @@ asm(".section .text\n"
"and %r3, %r1, $-8\n" // AAPCS : sp must be 8-byte aligned in the
"mov %sp, %r3\n" // callee, an bl doesn't push (lr=pc)
"bl main\n" // main() returns the status code, we'll exit with it.
- "and %r0, %r0, $0xff\n" // limit exit code to 8 bits
"movs r7, $1\n" // NR_exit == 1
"svc $0x00\n"
"");
@@ -1008,7 +1007,6 @@ asm(".section .text\n"
"add x2, x2, x1\n" // + argv
"and sp, x1, -16\n" // sp must be 16-byte aligned in the callee
"bl main\n" // main() returns the status code, we'll exit with it.
- "and x0, x0, 0xff\n" // limit exit code to 8 bits
"mov x8, 93\n" // NR_exit == 93
"svc #0\n"
"");
@@ -1213,7 +1211,7 @@ asm(".section .text\n"
"addiu $sp,$sp,-16\n" // the callee expects to save a0..a3 there!
"jal main\n" // main() returns the status code, we'll exit with it.
"nop\n" // delayed slot
- "and $a0, $v0, 0xff\n" // limit exit code to 8 bits
+ "move $a0, $v0\n" // retrieve 32-bit exit code from v0
"li $v0, 4001\n" // NR_exit == 4001
"syscall\n"
".end __start\n"
@@ -1411,7 +1409,6 @@ asm(".section .text\n"
"add a2,a2,a1\n" // + argv
"andi sp,a1,-16\n" // sp must be 16-byte aligned
"call main\n" // main() returns the status code, we'll exit with it.
- "andi a0, a0, 0xff\n" // limit exit code to 8 bits
"li a7, 93\n" // NR_exit == 93
"ecall\n"
"");
From: Willy Tarreau <[email protected]>
commit ebbe0d8a449d183fa43b42d84fcb248e25303985 upstream.
After re-checking in the spec and comparing stack offsets with glibc,
The last pushed argument must be 16-byte aligned (i.e. aligned before the
call) so that in the callee esp+4 is multiple of 16, so the principle is
the 32-bit equivalent to what Ammar fixed for x86_64. It's possible that
32-bit code using SSE2 or MMX could have been affected. In addition the
frame pointer ought to be zero at the deepest level.
Link: https://gitlab.com/x86-psABIs/i386-ABI/-/wikis/Intel386-psABI
Cc: Ammar Faizi <[email protected]>
Cc: [email protected]
Signed-off-by: Willy Tarreau <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/include/nolibc/nolibc.h | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
--- a/tools/include/nolibc/nolibc.h
+++ b/tools/include/nolibc/nolibc.h
@@ -606,13 +606,21 @@ struct sys_stat_struct {
})
/* startup code */
+/*
+ * i386 System V ABI mandates:
+ * 1) last pushed argument must be 16-byte aligned.
+ * 2) The deepest stack frame should be set to zero
+ *
+ */
asm(".section .text\n"
".global _start\n"
"_start:\n"
"pop %eax\n" // argc (first arg, %eax)
"mov %esp, %ebx\n" // argv[] (second arg, %ebx)
"lea 4(%ebx,%eax,4),%ecx\n" // then a NULL then envp (third arg, %ecx)
- "and $-16, %esp\n" // x86 ABI : esp must be 16-byte aligned when
+ "xor %ebp, %ebp\n" // zero the stack frame
+ "and $-16, %esp\n" // x86 ABI : esp must be 16-byte aligned before
+ "sub $4, %esp\n" // the call instruction (args are aligned)
"push %ecx\n" // push all registers on the stack so that we
"push %ebx\n" // support both regparm and plain stack modes
"push %eax\n"
From: Brian Norris <[email protected]>
[ Upstream commit 32a267e9c057e1636e7afdd20599aa5741a73079 ]
If we fail to attach (e.g., because 1 of 2 dual-DSI controllers aren't
ready), we leave a dangling drm_panel reference to freed memory. Clean
that up on failure.
This problem exists since the driver's introduction, but is especially
relevant after refactored for dual-DSI variants.
Fixes: 14c8f2e9f8ea ("drm/panel: add Innolux P079ZCA panel driver")
Fixes: 7ad4e4636c54 ("drm/panel: p079zca: Refactor panel driver to support multiple panels")
Signed-off-by: Brian Norris <[email protected]>
Signed-off-by: Sam Ravnborg <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20210923173336.2.I9023cf8811a3abf4964ed84eb681721d8bb489d6@changeid
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/panel/panel-innolux-p079zca.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/panel/panel-innolux-p079zca.c b/drivers/gpu/drm/panel/panel-innolux-p079zca.c
index aea3162253914..f194b62e290ca 100644
--- a/drivers/gpu/drm/panel/panel-innolux-p079zca.c
+++ b/drivers/gpu/drm/panel/panel-innolux-p079zca.c
@@ -484,6 +484,7 @@ static void innolux_panel_del(struct innolux_panel *innolux)
static int innolux_panel_probe(struct mipi_dsi_device *dsi)
{
const struct panel_desc *desc;
+ struct innolux_panel *innolux;
int err;
desc = of_device_get_match_data(&dsi->dev);
@@ -495,7 +496,14 @@ static int innolux_panel_probe(struct mipi_dsi_device *dsi)
if (err < 0)
return err;
- return mipi_dsi_attach(dsi);
+ err = mipi_dsi_attach(dsi);
+ if (err < 0) {
+ innolux = mipi_dsi_get_drvdata(dsi);
+ innolux_panel_del(innolux);
+ return err;
+ }
+
+ return 0;
}
static int innolux_panel_remove(struct mipi_dsi_device *dsi)
--
2.34.1
From: Alexander Aring <[email protected]>
[ Upstream commit 4c3d90570bcc2b338f70f61f01110268e281ca3c ]
In some cases kernel_getpeername() will held the socket lock which is
already held when the socket layer calls error_report() callback. Since
commit 9dfc685e0262 ("inet: remove races in inet{6}_getname()") this
problem becomes more likely because the socket lock will be held always.
You will see something like:
bob9-u5 login: [ 562.316860] BUG: spinlock recursion on CPU#7, swapper/7/0
[ 562.318562] lock: 0xffff8f2284720088, .magic: dead4ead, .owner: swapper/7/0, .owner_cpu: 7
[ 562.319522] CPU: 7 PID: 0 Comm: swapper/7 Not tainted 5.15.0+ #135
[ 562.320346] Hardware name: Red Hat KVM/RHEL-AV, BIOS 1.13.0-2.module+el8.3.0+7353+9de0a3cc 04/01/2014
[ 562.321277] Call Trace:
[ 562.321529] <IRQ>
[ 562.321734] dump_stack_lvl+0x33/0x42
[ 562.322282] do_raw_spin_lock+0x8b/0xc0
[ 562.322674] lock_sock_nested+0x1e/0x50
[ 562.323057] inet_getname+0x39/0x110
[ 562.323425] ? sock_def_readable+0x80/0x80
[ 562.323838] lowcomms_error_report+0x63/0x260 [dlm]
[ 562.324338] ? wait_for_completion_interruptible_timeout+0xd2/0x120
[ 562.324949] ? lock_timer_base+0x67/0x80
[ 562.325330] ? do_raw_spin_unlock+0x49/0xc0
[ 562.325735] ? _raw_spin_unlock_irqrestore+0x1e/0x40
[ 562.326218] ? del_timer+0x54/0x80
[ 562.326549] sk_error_report+0x12/0x70
[ 562.326919] tcp_validate_incoming+0x3c8/0x530
[ 562.327347] ? kvm_clock_read+0x14/0x30
[ 562.327718] ? ktime_get+0x3b/0xa0
[ 562.328055] tcp_rcv_established+0x121/0x660
[ 562.328466] tcp_v4_do_rcv+0x132/0x260
[ 562.328835] tcp_v4_rcv+0xcea/0xe20
[ 562.329173] ip_protocol_deliver_rcu+0x35/0x1f0
[ 562.329615] ip_local_deliver_finish+0x54/0x60
[ 562.330050] ip_local_deliver+0xf7/0x110
[ 562.330431] ? inet_rtm_getroute+0x211/0x840
[ 562.330848] ? ip_protocol_deliver_rcu+0x1f0/0x1f0
[ 562.331310] ip_rcv+0xe1/0xf0
[ 562.331603] ? ip_local_deliver+0x110/0x110
[ 562.332011] __netif_receive_skb_core+0x46a/0x1040
[ 562.332476] ? inet_gro_receive+0x263/0x2e0
[ 562.332885] __netif_receive_skb_list_core+0x13b/0x2c0
[ 562.333383] netif_receive_skb_list_internal+0x1c8/0x2f0
[ 562.333896] ? update_load_avg+0x7e/0x5e0
[ 562.334285] gro_normal_list.part.149+0x19/0x40
[ 562.334722] napi_complete_done+0x67/0x160
[ 562.335134] virtnet_poll+0x2ad/0x408 [virtio_net]
[ 562.335644] __napi_poll+0x28/0x140
[ 562.336012] net_rx_action+0x23d/0x300
[ 562.336414] __do_softirq+0xf2/0x2ea
[ 562.336803] irq_exit_rcu+0xc1/0xf0
[ 562.337173] common_interrupt+0xb9/0xd0
It is and was always forbidden to call kernel_getpeername() in context
of error_report(). To get rid of the problem we access the destination
address for the peer over the socket structure. While on it we fix to
print out the destination port of the inet socket.
Fixes: 1a31833d085a ("DLM: Replace nodeid_to_addr with kernel_getpeername")
Reported-by: Bob Peterson <[email protected]>
Signed-off-by: Alexander Aring <[email protected]>
Signed-off-by: David Teigland <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/dlm/lowcomms.c | 42 ++++++++++++++++++++----------------------
1 file changed, 20 insertions(+), 22 deletions(-)
diff --git a/fs/dlm/lowcomms.c b/fs/dlm/lowcomms.c
index 0a8645ed4b2d6..904855fa20655 100644
--- a/fs/dlm/lowcomms.c
+++ b/fs/dlm/lowcomms.c
@@ -471,8 +471,8 @@ int dlm_lowcomms_connect_node(int nodeid)
static void lowcomms_error_report(struct sock *sk)
{
struct connection *con;
- struct sockaddr_storage saddr;
void (*orig_report)(struct sock *) = NULL;
+ struct inet_sock *inet;
read_lock_bh(&sk->sk_callback_lock);
con = sock2con(sk);
@@ -480,33 +480,31 @@ static void lowcomms_error_report(struct sock *sk)
goto out;
orig_report = listen_sock.sk_error_report;
- if (kernel_getpeername(sk->sk_socket, (struct sockaddr *)&saddr) < 0) {
- printk_ratelimited(KERN_ERR "dlm: node %d: socket error "
- "sending to node %d, port %d, "
- "sk_err=%d/%d\n", dlm_our_nodeid(),
- con->nodeid, dlm_config.ci_tcp_port,
- sk->sk_err, sk->sk_err_soft);
- } else if (saddr.ss_family == AF_INET) {
- struct sockaddr_in *sin4 = (struct sockaddr_in *)&saddr;
+ inet = inet_sk(sk);
+ switch (sk->sk_family) {
+ case AF_INET:
printk_ratelimited(KERN_ERR "dlm: node %d: socket error "
- "sending to node %d at %pI4, port %d, "
+ "sending to node %d at %pI4, dport %d, "
"sk_err=%d/%d\n", dlm_our_nodeid(),
- con->nodeid, &sin4->sin_addr.s_addr,
- dlm_config.ci_tcp_port, sk->sk_err,
+ con->nodeid, &inet->inet_daddr,
+ ntohs(inet->inet_dport), sk->sk_err,
sk->sk_err_soft);
- } else {
- struct sockaddr_in6 *sin6 = (struct sockaddr_in6 *)&saddr;
-
+ break;
+ case AF_INET6:
printk_ratelimited(KERN_ERR "dlm: node %d: socket error "
- "sending to node %d at %u.%u.%u.%u, "
- "port %d, sk_err=%d/%d\n", dlm_our_nodeid(),
- con->nodeid, sin6->sin6_addr.s6_addr32[0],
- sin6->sin6_addr.s6_addr32[1],
- sin6->sin6_addr.s6_addr32[2],
- sin6->sin6_addr.s6_addr32[3],
- dlm_config.ci_tcp_port, sk->sk_err,
+ "sending to node %d at %pI6c, "
+ "dport %d, sk_err=%d/%d\n", dlm_our_nodeid(),
+ con->nodeid, &sk->sk_v6_daddr,
+ ntohs(inet->inet_dport), sk->sk_err,
sk->sk_err_soft);
+ break;
+ default:
+ printk_ratelimited(KERN_ERR "dlm: node %d: socket error "
+ "invalid socket family %d set, "
+ "sk_err=%d/%d\n", dlm_our_nodeid(),
+ sk->sk_family, sk->sk_err, sk->sk_err_soft);
+ goto out;
}
out:
read_unlock_bh(&sk->sk_callback_lock);
--
2.34.1
From: Lad Prabhakar <[email protected]>
[ Upstream commit 981387ed06b96908223a607f5fba6efa42728fc2 ]
rpcif_sw_init() can fail so make sure we check the return value
of it and on error exit rpcif_hb_probe() callback with error code.
Fixes: 5de15b610f78 ("mtd: hyperbus: add Renesas RPC-IF driver")
Signed-off-by: Lad Prabhakar <[email protected]>
Signed-off-by: Vignesh Raghavendra <[email protected]>
Reviewed-by: Biju Das <[email protected]>
Reviewed-by: Wolfram Sang <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mtd/hyperbus/rpc-if.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/mtd/hyperbus/rpc-if.c b/drivers/mtd/hyperbus/rpc-if.c
index ecb050ba95cdf..367b0d72bf622 100644
--- a/drivers/mtd/hyperbus/rpc-if.c
+++ b/drivers/mtd/hyperbus/rpc-if.c
@@ -124,7 +124,9 @@ static int rpcif_hb_probe(struct platform_device *pdev)
if (!hyperbus)
return -ENOMEM;
- rpcif_sw_init(&hyperbus->rpc, pdev->dev.parent);
+ error = rpcif_sw_init(&hyperbus->rpc, pdev->dev.parent);
+ if (error)
+ return error;
platform_set_drvdata(pdev, hyperbus);
--
2.34.1
From: Paul Cercueil <[email protected]>
commit 9c9d709965385de5a99f84b14bd5860e1541729e upstream.
The function nand_davinci_read_page_hwecc_oob_first() first reads the
OOB data, extracts the ECC information, programs the ECC hardware before
reading the actual data in a loop.
Right after the OOB data was read, it called nand_read_page_op() to
reset the read cursor to the beginning of the page. This caused the
first page to be read twice: in that call, and later in the loop.
Address that issue by changing the call to nand_read_page_op() to
nand_change_read_column_op(), which will only reset the read cursor.
Cc: <[email protected]> # v5.2
Fixes: a0ac778eb82c ("mtd: rawnand: ingenic: Add support for the JZ4740")
Signed-off-by: Paul Cercueil <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mtd/nand/raw/davinci_nand.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/mtd/nand/raw/davinci_nand.c
+++ b/drivers/mtd/nand/raw/davinci_nand.c
@@ -401,7 +401,8 @@ static int nand_davinci_read_page_hwecc_
if (ret)
return ret;
- ret = nand_read_page_op(chip, page, 0, NULL, 0);
+ /* Move read cursor to start of page */
+ ret = nand_change_read_column_op(chip, 0, NULL, 0, false);
if (ret)
return ret;
From: Dillon Min <[email protected]>
[ Upstream commit c9ee220d76775e42f35d634479c978d9350077d3 ]
Since the type of parameter size is unsigned long,
it should printk by %lu, instead of %ld, fix it.
Fixes: 7952be9b6ece ("media: drivers/media/common/videobuf2: rename from videobuf")
Signed-off-by: Dillon Min <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/common/videobuf2/videobuf2-dma-contig.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/media/common/videobuf2/videobuf2-dma-contig.c b/drivers/media/common/videobuf2/videobuf2-dma-contig.c
index 2f3a5996d3fc9..fe626109ef4db 100644
--- a/drivers/media/common/videobuf2/videobuf2-dma-contig.c
+++ b/drivers/media/common/videobuf2/videobuf2-dma-contig.c
@@ -150,7 +150,7 @@ static void *vb2_dc_alloc(struct device *dev, unsigned long attrs,
buf->cookie = dma_alloc_attrs(dev, size, &buf->dma_addr,
GFP_KERNEL | gfp_flags, buf->attrs);
if (!buf->cookie) {
- dev_err(dev, "dma_alloc_coherent of size %ld failed\n", size);
+ dev_err(dev, "dma_alloc_coherent of size %lu failed\n", size);
kfree(buf);
return ERR_PTR(-ENOMEM);
}
@@ -196,9 +196,9 @@ static int vb2_dc_mmap(void *buf_priv, struct vm_area_struct *vma)
vma->vm_ops->open(vma);
- pr_debug("%s: mapped dma addr 0x%08lx at 0x%08lx, size %ld\n",
- __func__, (unsigned long)buf->dma_addr, vma->vm_start,
- buf->size);
+ pr_debug("%s: mapped dma addr 0x%08lx at 0x%08lx, size %lu\n",
+ __func__, (unsigned long)buf->dma_addr, vma->vm_start,
+ buf->size);
return 0;
}
--
2.34.1
From: Luiz Augusto von Dentz <[email protected]>
[ Upstream commit f5ff291098f70a70b344df1e388596755c3c8315 ]
In order to group sockets being connected using L2CAP_MODE_EXT_FLOWCTL
the pid is used but sk_peer_pid was not being initialized as it is
currently only done for af_unix.
Fixes: b48596d1dc25 ("Bluetooth: L2CAP: Add get_peer_pid callback")
Signed-off-by: Luiz Augusto von Dentz <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/bluetooth/l2cap_sock.c | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
diff --git a/net/bluetooth/l2cap_sock.c b/net/bluetooth/l2cap_sock.c
index 160c016a5dfb9..4574c5cb1b596 100644
--- a/net/bluetooth/l2cap_sock.c
+++ b/net/bluetooth/l2cap_sock.c
@@ -172,6 +172,21 @@ done:
return err;
}
+static void l2cap_sock_init_pid(struct sock *sk)
+{
+ struct l2cap_chan *chan = l2cap_pi(sk)->chan;
+
+ /* Only L2CAP_MODE_EXT_FLOWCTL ever need to access the PID in order to
+ * group the channels being requested.
+ */
+ if (chan->mode != L2CAP_MODE_EXT_FLOWCTL)
+ return;
+
+ spin_lock(&sk->sk_peer_lock);
+ sk->sk_peer_pid = get_pid(task_tgid(current));
+ spin_unlock(&sk->sk_peer_lock);
+}
+
static int l2cap_sock_connect(struct socket *sock, struct sockaddr *addr,
int alen, int flags)
{
@@ -243,6 +258,8 @@ static int l2cap_sock_connect(struct socket *sock, struct sockaddr *addr,
if (chan->psm && bdaddr_type_is_le(chan->src_type) && !chan->mode)
chan->mode = L2CAP_MODE_LE_FLOWCTL;
+ l2cap_sock_init_pid(sk);
+
err = l2cap_chan_connect(chan, la.l2_psm, __le16_to_cpu(la.l2_cid),
&la.l2_bdaddr, la.l2_bdaddr_type);
if (err)
@@ -298,6 +315,8 @@ static int l2cap_sock_listen(struct socket *sock, int backlog)
goto done;
}
+ l2cap_sock_init_pid(sk);
+
sk->sk_max_ack_backlog = backlog;
sk->sk_ack_backlog = 0;
--
2.34.1
From: xinhui pan <[email protected]>
commit 781050b0a3164934857c300bb0bc291e38c26b6f upstream.
After we move BO to a new memory region, we should put it to
the new memory manager's lru list regardless we unlock the resv or not.
Cc: [email protected]
Reviewed-by: Christian König <[email protected]>
Signed-off-by: xinhui pan <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Christian König <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/ttm/ttm_bo.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/gpu/drm/ttm/ttm_bo.c
+++ b/drivers/gpu/drm/ttm/ttm_bo.c
@@ -789,6 +789,8 @@ int ttm_mem_evict_first(struct ttm_bo_de
ret = ttm_bo_evict(bo, ctx);
if (locked)
ttm_bo_unreserve(bo);
+ else
+ ttm_bo_move_to_lru_tail_unlocked(bo);
ttm_bo_put(bo);
return ret;
From: Biju Das <[email protected]>
[ Upstream commit e1a9faddffe7e555304dc2e3284c84fbee0679ee ]
The CAT875 sub board from Silicon Linux uses a Realtek PHY.
The phy driver commit bbc4d71d63549bcd003 ("net: phy: realtek: fix
rtl8211e rx/tx delay config") introduced NFS mount failures. Now it
needs both rx/tx delays for the NFS mount to work.
This patch fixes the NFS mount failure issue by adding "rgmii-id" mode
to the avb device node.
Signed-off-by: Biju Das <[email protected]>
Fixes: bbc4d71d63549bcd ("net: phy: realtek: fix rtl8211e rx/tx delay config")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/renesas/cat875.dtsi | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm64/boot/dts/renesas/cat875.dtsi b/arch/arm64/boot/dts/renesas/cat875.dtsi
index 801ea54b027c4..20f8adc635e72 100644
--- a/arch/arm64/boot/dts/renesas/cat875.dtsi
+++ b/arch/arm64/boot/dts/renesas/cat875.dtsi
@@ -18,6 +18,7 @@
pinctrl-names = "default";
renesas,no-ether-link;
phy-handle = <&phy0>;
+ phy-mode = "rgmii-id";
status = "okay";
phy0: ethernet-phy@0 {
--
2.34.1
From: Bryan O'Donoghue <[email protected]>
[ Upstream commit 3652096e5263ad67604b0323f71d133485f410e5 ]
When unloading the driver we are not releasing the DMA descriptors which we
previously allocated.
Fixes: 8e84c2582169 ("wcn36xx: mac80211 driver for Qualcomm WCN3660/WCN3680 hardware")
Signed-off-by: Bryan O'Donoghue <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/wcn36xx/dxe.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/net/wireless/ath/wcn36xx/dxe.c b/drivers/net/wireless/ath/wcn36xx/dxe.c
index 0909d0c423cbb..b117d8a0f446f 100644
--- a/drivers/net/wireless/ath/wcn36xx/dxe.c
+++ b/drivers/net/wireless/ath/wcn36xx/dxe.c
@@ -1014,4 +1014,9 @@ void wcn36xx_dxe_deinit(struct wcn36xx *wcn)
wcn36xx_dxe_ch_free_skbs(wcn, &wcn->dxe_rx_l_ch);
wcn36xx_dxe_ch_free_skbs(wcn, &wcn->dxe_rx_h_ch);
+
+ wcn36xx_dxe_deinit_descs(wcn->dev, &wcn->dxe_tx_l_ch);
+ wcn36xx_dxe_deinit_descs(wcn->dev, &wcn->dxe_tx_h_ch);
+ wcn36xx_dxe_deinit_descs(wcn->dev, &wcn->dxe_rx_l_ch);
+ wcn36xx_dxe_deinit_descs(wcn->dev, &wcn->dxe_rx_h_ch);
}
--
2.34.1
From: Dongliang Mu <[email protected]>
[ Upstream commit 22be5a10d0b24eec9e45decd15d7e6112b25f080 ]
In the em28xx_init_rev, if em28xx_audio_setup fails, this function fails
to deallocate the media_dev allocated in the em28xx_media_device_init.
Fix this by adding em28xx_unregister_media_device to free media_dev.
BTW, this patch is tested in my local syzkaller instance, and it can
prevent the memory leak from occurring again.
CC: Pavel Skripkin <[email protected]>
Fixes: 37ecc7b1278f ("[media] em28xx: add media controller support")
Signed-off-by: Dongliang Mu <[email protected]>
Reported-by: syzkaller <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/usb/em28xx/em28xx-cards.c | 18 ++++++++++++------
1 file changed, 12 insertions(+), 6 deletions(-)
diff --git a/drivers/media/usb/em28xx/em28xx-cards.c b/drivers/media/usb/em28xx/em28xx-cards.c
index cf45cc566cbe2..87e375562dbb2 100644
--- a/drivers/media/usb/em28xx/em28xx-cards.c
+++ b/drivers/media/usb/em28xx/em28xx-cards.c
@@ -3575,8 +3575,10 @@ static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev,
if (dev->is_audio_only) {
retval = em28xx_audio_setup(dev);
- if (retval)
- return -ENODEV;
+ if (retval) {
+ retval = -ENODEV;
+ goto err_deinit_media;
+ }
em28xx_init_extension(dev);
return 0;
@@ -3595,7 +3597,7 @@ static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev,
dev_err(&dev->intf->dev,
"%s: em28xx_i2c_register bus 0 - error [%d]!\n",
__func__, retval);
- return retval;
+ goto err_deinit_media;
}
/* register i2c bus 1 */
@@ -3611,9 +3613,7 @@ static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev,
"%s: em28xx_i2c_register bus 1 - error [%d]!\n",
__func__, retval);
- em28xx_i2c_unregister(dev, 0);
-
- return retval;
+ goto err_unreg_i2c;
}
}
@@ -3621,6 +3621,12 @@ static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev,
em28xx_card_setup(dev);
return 0;
+
+err_unreg_i2c:
+ em28xx_i2c_unregister(dev, 0);
+err_deinit_media:
+ em28xx_unregister_media_device(dev);
+ return retval;
}
static int em28xx_duplicate_dev(struct em28xx *dev)
--
2.34.1
From: Jammy Huang <[email protected]>
[ Upstream commit af6d1bde395cac174ee71adcd3fa43f6435c7206 ]
If res-chg, VE_INTERRUPT_MODE_DETECT_WD irq will be raised. But
v4l2_input_status won't be updated to no-signal immediately until
aspeed_video_get_resolution() in aspeed_video_resolution_work().
During the period of time, aspeed_video_start_frame() could be called
because it doesn't know signal becomes unstable now. If it goes with
aspeed_video_init_regs() of aspeed_video_irq_res_change()
simultaneously, it will mess up hw state.
To fix this problem, v4l2_input_status is updated to no-signal
immediately for VE_INTERRUPT_MODE_DETECT_WD irq.
Fixes: d2b4387f3bdf ("media: platform: Add Aspeed Video Engine driver")
Signed-off-by: Jammy Huang <[email protected]>
Acked-by: Paul Menzel <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/platform/aspeed-video.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/media/platform/aspeed-video.c b/drivers/media/platform/aspeed-video.c
index 23c41c545c536..debc7509c173c 100644
--- a/drivers/media/platform/aspeed-video.c
+++ b/drivers/media/platform/aspeed-video.c
@@ -556,6 +556,8 @@ static void aspeed_video_irq_res_change(struct aspeed_video *video, ulong delay)
set_bit(VIDEO_RES_CHANGE, &video->flags);
clear_bit(VIDEO_FRAME_INPRG, &video->flags);
+ video->v4l2_input_status = V4L2_IN_ST_NO_SIGNAL;
+
aspeed_video_off(video);
aspeed_video_bufs_done(video, VB2_BUF_STATE_ERROR);
@@ -1337,7 +1339,6 @@ static void aspeed_video_resolution_work(struct work_struct *work)
struct delayed_work *dwork = to_delayed_work(work);
struct aspeed_video *video = container_of(dwork, struct aspeed_video,
res_work);
- u32 input_status = video->v4l2_input_status;
aspeed_video_on(video);
@@ -1350,8 +1351,7 @@ static void aspeed_video_resolution_work(struct work_struct *work)
aspeed_video_get_resolution(video);
if (video->detected_timings.width != video->active_timings.width ||
- video->detected_timings.height != video->active_timings.height ||
- input_status != video->v4l2_input_status) {
+ video->detected_timings.height != video->active_timings.height) {
static const struct v4l2_event ev = {
.type = V4L2_EVENT_SOURCE_CHANGE,
.u.src_change.changes = V4L2_EVENT_SRC_CH_RESOLUTION,
--
2.34.1
From: Stanimir Varbanov <[email protected]>
[ Upstream commit a76f43a490542ecb8c57176730b6eb665d716139 ]
Presently we use device_link to control core power domain. But this
leads to issues because the genpd doesn't guarantee synchronous on/off
for supplier devices. Switch to manually control by pmruntime calls.
Tested-by: Fritz Koenig <[email protected]>
Signed-off-by: Stanimir Varbanov <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/platform/qcom/venus/core.h | 2 --
.../media/platform/qcom/venus/pm_helpers.c | 36 ++++++++++---------
2 files changed, 19 insertions(+), 19 deletions(-)
diff --git a/drivers/media/platform/qcom/venus/core.h b/drivers/media/platform/qcom/venus/core.h
index 05c9fbd51f0c0..f2a0ef9ee884e 100644
--- a/drivers/media/platform/qcom/venus/core.h
+++ b/drivers/media/platform/qcom/venus/core.h
@@ -123,7 +123,6 @@ struct venus_caps {
* @clks: an array of struct clk pointers
* @vcodec0_clks: an array of vcodec0 struct clk pointers
* @vcodec1_clks: an array of vcodec1 struct clk pointers
- * @pd_dl_venus: pmdomain device-link for venus domain
* @pmdomains: an array of pmdomains struct device pointers
* @vdev_dec: a reference to video device structure for decoder instances
* @vdev_enc: a reference to video device structure for encoder instances
@@ -161,7 +160,6 @@ struct venus_core {
struct icc_path *cpucfg_path;
struct opp_table *opp_table;
bool has_opp_table;
- struct device_link *pd_dl_venus;
struct device *pmdomains[VIDC_PMDOMAINS_NUM_MAX];
struct device_link *opp_dl_venus;
struct device *opp_pmdomain;
diff --git a/drivers/media/platform/qcom/venus/pm_helpers.c b/drivers/media/platform/qcom/venus/pm_helpers.c
index 2946547a0df4a..bce9a370015fb 100644
--- a/drivers/media/platform/qcom/venus/pm_helpers.c
+++ b/drivers/media/platform/qcom/venus/pm_helpers.c
@@ -773,13 +773,6 @@ static int vcodec_domains_get(struct device *dev)
core->pmdomains[i] = pd;
}
- core->pd_dl_venus = device_link_add(dev, core->pmdomains[0],
- DL_FLAG_PM_RUNTIME |
- DL_FLAG_STATELESS |
- DL_FLAG_RPM_ACTIVE);
- if (!core->pd_dl_venus)
- return -ENODEV;
-
skip_pmdomains:
if (!core->has_opp_table)
return 0;
@@ -806,14 +799,12 @@ skip_pmdomains:
opp_dl_add_err:
dev_pm_opp_detach_genpd(core->opp_table);
opp_attach_err:
- if (core->pd_dl_venus) {
- device_link_del(core->pd_dl_venus);
- for (i = 0; i < res->vcodec_pmdomains_num; i++) {
- if (IS_ERR_OR_NULL(core->pmdomains[i]))
- continue;
- dev_pm_domain_detach(core->pmdomains[i], true);
- }
+ for (i = 0; i < res->vcodec_pmdomains_num; i++) {
+ if (IS_ERR_OR_NULL(core->pmdomains[i]))
+ continue;
+ dev_pm_domain_detach(core->pmdomains[i], true);
}
+
return ret;
}
@@ -826,9 +817,6 @@ static void vcodec_domains_put(struct device *dev)
if (!res->vcodec_pmdomains_num)
goto skip_pmdomains;
- if (core->pd_dl_venus)
- device_link_del(core->pd_dl_venus);
-
for (i = 0; i < res->vcodec_pmdomains_num; i++) {
if (IS_ERR_OR_NULL(core->pmdomains[i]))
continue;
@@ -916,16 +904,30 @@ static void core_put_v4(struct device *dev)
static int core_power_v4(struct device *dev, int on)
{
struct venus_core *core = dev_get_drvdata(dev);
+ struct device *pmctrl = core->pmdomains[0];
int ret = 0;
if (on == POWER_ON) {
+ if (pmctrl) {
+ ret = pm_runtime_get_sync(pmctrl);
+ if (ret < 0) {
+ pm_runtime_put_noidle(pmctrl);
+ return ret;
+ }
+ }
+
ret = core_clks_enable(core);
+ if (ret < 0 && pmctrl)
+ pm_runtime_put_sync(pmctrl);
} else {
/* Drop the performance state vote */
if (core->opp_pmdomain)
dev_pm_opp_set_rate(dev, 0);
core_clks_disable(core);
+
+ if (pmctrl)
+ pm_runtime_put_sync(pmctrl);
}
return ret;
--
2.34.1
From: Anilkumar Kolli <[email protected]>
[ Upstream commit b689f091aafd1a874b2f88137934276ab0fca480 ]
CE interrupt configuration uses host ce parameters to assign/free
interrupts. Use host ce parameters to enable/disable interrupts.
This patch fixes below BUG,
BUG: KASAN: global-out-of-bounds in 0xffffffbffdfb035c at addr
ffffffbffde6eeac
Read of size 4 by task kworker/u8:2/132
Address belongs to variable ath11k_core_qmi_firmware_ready+0x1b0/0x5bc [ath11k]
OOB is due to ath11k_ahb_ce_irqs_enable() iterates ce_count(which is 12)
times and accessing 12th element in target_ce_config
(which has only 11 elements) from ath11k_ahb_ce_irq_enable().
With this change host ce configs are used to enable/disable interrupts.
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-00471-QCAHKSWPL_SILICONZ-1
Fixes: 967c1d1131fa ("ath11k: move target ce configs to hw_params")
Signed-off-by: Anilkumar Kolli <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/ath11k/ahb.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/net/wireless/ath/ath11k/ahb.c b/drivers/net/wireless/ath/ath11k/ahb.c
index 430723c64adce..e8cca58e18ffc 100644
--- a/drivers/net/wireless/ath/ath11k/ahb.c
+++ b/drivers/net/wireless/ath/ath11k/ahb.c
@@ -206,13 +206,13 @@ static void ath11k_ahb_clearbit32(struct ath11k_base *ab, u8 bit, u32 offset)
static void ath11k_ahb_ce_irq_enable(struct ath11k_base *ab, u16 ce_id)
{
- const struct ce_pipe_config *ce_config;
+ const struct ce_attr *ce_attr;
- ce_config = &ab->hw_params.target_ce_config[ce_id];
- if (__le32_to_cpu(ce_config->pipedir) & PIPEDIR_OUT)
+ ce_attr = &ab->hw_params.host_ce_config[ce_id];
+ if (ce_attr->src_nentries)
ath11k_ahb_setbit32(ab, ce_id, CE_HOST_IE_ADDRESS);
- if (__le32_to_cpu(ce_config->pipedir) & PIPEDIR_IN) {
+ if (ce_attr->dest_nentries) {
ath11k_ahb_setbit32(ab, ce_id, CE_HOST_IE_2_ADDRESS);
ath11k_ahb_setbit32(ab, ce_id + CE_HOST_IE_3_SHIFT,
CE_HOST_IE_3_ADDRESS);
@@ -221,13 +221,13 @@ static void ath11k_ahb_ce_irq_enable(struct ath11k_base *ab, u16 ce_id)
static void ath11k_ahb_ce_irq_disable(struct ath11k_base *ab, u16 ce_id)
{
- const struct ce_pipe_config *ce_config;
+ const struct ce_attr *ce_attr;
- ce_config = &ab->hw_params.target_ce_config[ce_id];
- if (__le32_to_cpu(ce_config->pipedir) & PIPEDIR_OUT)
+ ce_attr = &ab->hw_params.host_ce_config[ce_id];
+ if (ce_attr->src_nentries)
ath11k_ahb_clearbit32(ab, ce_id, CE_HOST_IE_ADDRESS);
- if (__le32_to_cpu(ce_config->pipedir) & PIPEDIR_IN) {
+ if (ce_attr->dest_nentries) {
ath11k_ahb_clearbit32(ab, ce_id, CE_HOST_IE_2_ADDRESS);
ath11k_ahb_clearbit32(ab, ce_id + CE_HOST_IE_3_SHIFT,
CE_HOST_IE_3_ADDRESS);
--
2.34.1
From: Dan Carpenter <[email protected]>
[ Upstream commit cb4d67a998e97365afdf34965b069601da1dae60 ]
The "power" pointer is not initialized on the else path and that would
lead to an Oops.
Link: https://lore.kernel.org/linux-media/20211012082150.GA31086@kili
Fixes: c30f4cb2d4c7 ("media: atomisp: Refactor PMIC detection to a separate function")
Signed-off-by: Dan Carpenter <[email protected]>
Reviewed-by: Kieran Bingham <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c b/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c
index 135994d44802c..34480ca164746 100644
--- a/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c
+++ b/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c
@@ -481,7 +481,7 @@ fail:
static u8 gmin_get_pmic_id_and_addr(struct device *dev)
{
- struct i2c_client *power;
+ struct i2c_client *power = NULL;
static u8 pmic_i2c_addr;
if (pmic_id)
--
2.34.1
From: Bryan O'Donoghue <[email protected]>
[ Upstream commit 08b1cf474b7f72750adebe0f0a35f8e9a3eb75f6 ]
Commit aaaa93eda64b ("media] media: venus: venc: add video encoder files")
is the last in a series of three commits to add core.c vdec.c and venc.c
adding core, encoder and decoder.
The encoder and decoder check for core drvdata as set and return -EPROBE_DEFER
if it has not been set, however both the encoder and decoder rely on
core.v4l2_dev as valid.
core.v4l2_dev will not be valid until v4l2_device_register() has completed
in core.c's probe().
Normally this is never seen however, Dmitry reported the following
backtrace when compiling drivers and firmware directly into a kernel image.
[ 5.259968] Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT)
[ 5.269850] sd 0:0:0:3: [sdd] Optimal transfer size 524288 bytes
[ 5.275505] Workqueue: events deferred_probe_work_func
[ 5.275513] pstate: 60400005 (nZCv daif +PAN -UAO -TCO BTYPE=--)
[ 5.441211] usb 2-1: new SuperSpeedPlus Gen 2 USB device number 2 using xhci-hcd
[ 5.442486] pc : refcount_warn_saturate+0x140/0x148
[ 5.493756] hub 2-1:1.0: USB hub found
[ 5.496266] lr : refcount_warn_saturate+0x140/0x148
[ 5.500982] hub 2-1:1.0: 4 ports detected
[ 5.503440] sp : ffff80001067b730
[ 5.503442] x29: ffff80001067b730
[ 5.592660] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[ 5.598478] x28: ffff6c6bc1c379b8
[ 5.598480] x27: ffffa5c673852960 x26: ffffa5c673852000
[ 5.598484] x25: ffff6c6bc1c37800 x24: 0000000000000001
[ 5.810652] x23: 0000000000000000 x22: ffffa5c673bc7118
[ 5.813777] hub 1-1:1.0: USB hub found
[ 5.816108] x21: ffffa5c674440000 x20: 0000000000000001
[ 5.820846] hub 1-1:1.0: 4 ports detected
[ 5.825415] x19: ffffa5c6744f4000 x18: ffffffffffffffff
[ 5.825418] x17: 0000000000000000 x16: 0000000000000000
[ 5.825421] x15: 00000a4810c193ba x14: 0000000000000000
[ 5.825424] x13: 00000000000002b8 x12: 000000000000f20a
[ 5.825427] x11: 000000000000f20a x10: 0000000000000038
[ 5.845447] usb 2-1.1: new SuperSpeed Gen 1 USB device number 3 using xhci-hcd
[ 5.845904]
[ 5.845905] x9 : 0000000000000000 x8 : ffff6c6d36fae780
[ 5.871208] x7 : ffff6c6d36faf240 x6 : 0000000000000000
[ 5.876664] x5 : 0000000000000004 x4 : 0000000000000085
[ 5.882121] x3 : 0000000000000119 x2 : ffffa5c6741ef478
[ 5.887578] x1 : 3acbb3926faf5f00 x0 : 0000000000000000
[ 5.893036] Call trace:
[ 5.895551] refcount_warn_saturate+0x140/0x148
[ 5.900202] __video_register_device+0x64c/0xd10
[ 5.904944] venc_probe+0xc4/0x148
[ 5.908444] platform_probe+0x68/0xe0
[ 5.912210] really_probe+0x118/0x3e0
[ 5.915977] driver_probe_device+0x5c/0xc0
[ 5.920187] __device_attach_driver+0x98/0xb8
[ 5.924661] bus_for_each_drv+0x68/0xd0
[ 5.928604] __device_attach+0xec/0x148
[ 5.932547] device_initial_probe+0x14/0x20
[ 5.936845] bus_probe_device+0x9c/0xa8
[ 5.940788] device_add+0x3e8/0x7c8
[ 5.944376] of_device_add+0x4c/0x60
[ 5.948056] of_platform_device_create_pdata+0xbc/0x140
[ 5.953425] of_platform_bus_create+0x17c/0x3c0
[ 5.958078] of_platform_populate+0x80/0x110
[ 5.962463] venus_probe+0x2ec/0x4d8
[ 5.966143] platform_probe+0x68/0xe0
[ 5.969907] really_probe+0x118/0x3e0
[ 5.973674] driver_probe_device+0x5c/0xc0
[ 5.977882] __device_attach_driver+0x98/0xb8
[ 5.982356] bus_for_each_drv+0x68/0xd0
[ 5.986298] __device_attach+0xec/0x148
[ 5.990242] device_initial_probe+0x14/0x20
[ 5.994539] bus_probe_device+0x9c/0xa8
[ 5.998481] deferred_probe_work_func+0x74/0xb0
[ 6.003132] process_one_work+0x1e8/0x360
[ 6.007254] worker_thread+0x208/0x478
[ 6.011106] kthread+0x150/0x158
[ 6.014431] ret_from_fork+0x10/0x30
[ 6.018111] ---[ end trace f074246b1ecdb466 ]---
This patch fixes by
- Only setting drvdata after v4l2_device_register() completes
- Moving v4l2_device_register() so that suspend/reume in core::probe()
stays as-is
- Changes pm_ops->core_function() to take struct venus_core not struct
device
- Minimal rework of v4l2_device_*register in probe/remove
Reported-by: Dmitry Baryshkov <[email protected]>
Signed-off-by: Bryan O'Donoghue <[email protected]>
Signed-off-by: Stanimir Varbanov <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/platform/qcom/venus/core.c | 30 +++++++++++--------
.../media/platform/qcom/venus/pm_helpers.c | 30 ++++++++-----------
.../media/platform/qcom/venus/pm_helpers.h | 7 +++--
3 files changed, 34 insertions(+), 33 deletions(-)
diff --git a/drivers/media/platform/qcom/venus/core.c b/drivers/media/platform/qcom/venus/core.c
index 58ddebbb84468..bad553bf9f304 100644
--- a/drivers/media/platform/qcom/venus/core.c
+++ b/drivers/media/platform/qcom/venus/core.c
@@ -222,7 +222,6 @@ static int venus_probe(struct platform_device *pdev)
return -ENOMEM;
core->dev = dev;
- platform_set_drvdata(pdev, core);
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
core->base = devm_ioremap_resource(dev, r);
@@ -252,7 +251,7 @@ static int venus_probe(struct platform_device *pdev)
return -ENODEV;
if (core->pm_ops->core_get) {
- ret = core->pm_ops->core_get(dev);
+ ret = core->pm_ops->core_get(core);
if (ret)
return ret;
}
@@ -277,6 +276,12 @@ static int venus_probe(struct platform_device *pdev)
if (ret)
goto err_core_put;
+ ret = v4l2_device_register(dev, &core->v4l2_dev);
+ if (ret)
+ goto err_core_deinit;
+
+ platform_set_drvdata(pdev, core);
+
pm_runtime_enable(dev);
ret = pm_runtime_get_sync(dev);
@@ -311,10 +316,6 @@ static int venus_probe(struct platform_device *pdev)
if (ret)
goto err_venus_shutdown;
- ret = v4l2_device_register(dev, &core->v4l2_dev);
- if (ret)
- goto err_core_deinit;
-
ret = pm_runtime_put_sync(dev);
if (ret) {
pm_runtime_get_noresume(dev);
@@ -327,8 +328,6 @@ static int venus_probe(struct platform_device *pdev)
err_dev_unregister:
v4l2_device_unregister(&core->v4l2_dev);
-err_core_deinit:
- hfi_core_deinit(core, false);
err_venus_shutdown:
venus_shutdown(core);
err_runtime_disable:
@@ -336,9 +335,11 @@ err_runtime_disable:
pm_runtime_set_suspended(dev);
pm_runtime_disable(dev);
hfi_destroy(core);
+err_core_deinit:
+ hfi_core_deinit(core, false);
err_core_put:
if (core->pm_ops->core_put)
- core->pm_ops->core_put(dev);
+ core->pm_ops->core_put(core);
return ret;
}
@@ -364,11 +365,14 @@ static int venus_remove(struct platform_device *pdev)
pm_runtime_disable(dev);
if (pm_ops->core_put)
- pm_ops->core_put(dev);
+ pm_ops->core_put(core);
+
+ v4l2_device_unregister(&core->v4l2_dev);
hfi_destroy(core);
v4l2_device_unregister(&core->v4l2_dev);
+
mutex_destroy(&core->pm_lock);
mutex_destroy(&core->lock);
venus_dbgfs_deinit(core);
@@ -387,7 +391,7 @@ static __maybe_unused int venus_runtime_suspend(struct device *dev)
return ret;
if (pm_ops->core_power) {
- ret = pm_ops->core_power(dev, POWER_OFF);
+ ret = pm_ops->core_power(core, POWER_OFF);
if (ret)
return ret;
}
@@ -405,7 +409,7 @@ static __maybe_unused int venus_runtime_suspend(struct device *dev)
err_video_path:
icc_set_bw(core->cpucfg_path, kbps_to_icc(1000), 0);
err_cpucfg_path:
- pm_ops->core_power(dev, POWER_ON);
+ pm_ops->core_power(core, POWER_ON);
return ret;
}
@@ -425,7 +429,7 @@ static __maybe_unused int venus_runtime_resume(struct device *dev)
return ret;
if (pm_ops->core_power) {
- ret = pm_ops->core_power(dev, POWER_ON);
+ ret = pm_ops->core_power(core, POWER_ON);
if (ret)
return ret;
}
diff --git a/drivers/media/platform/qcom/venus/pm_helpers.c b/drivers/media/platform/qcom/venus/pm_helpers.c
index bce9a370015fb..63095d70f8d82 100644
--- a/drivers/media/platform/qcom/venus/pm_helpers.c
+++ b/drivers/media/platform/qcom/venus/pm_helpers.c
@@ -276,16 +276,13 @@ set_freq:
return 0;
}
-static int core_get_v1(struct device *dev)
+static int core_get_v1(struct venus_core *core)
{
- struct venus_core *core = dev_get_drvdata(dev);
-
return core_clks_get(core);
}
-static int core_power_v1(struct device *dev, int on)
+static int core_power_v1(struct venus_core *core, int on)
{
- struct venus_core *core = dev_get_drvdata(dev);
int ret = 0;
if (on == POWER_ON)
@@ -752,12 +749,12 @@ static int venc_power_v4(struct device *dev, int on)
return ret;
}
-static int vcodec_domains_get(struct device *dev)
+static int vcodec_domains_get(struct venus_core *core)
{
int ret;
struct opp_table *opp_table;
struct device **opp_virt_dev;
- struct venus_core *core = dev_get_drvdata(dev);
+ struct device *dev = core->dev;
const struct venus_resources *res = core->res;
struct device *pd;
unsigned int i;
@@ -808,9 +805,8 @@ opp_attach_err:
return ret;
}
-static void vcodec_domains_put(struct device *dev)
+static void vcodec_domains_put(struct venus_core *core)
{
- struct venus_core *core = dev_get_drvdata(dev);
const struct venus_resources *res = core->res;
unsigned int i;
@@ -833,9 +829,9 @@ skip_pmdomains:
dev_pm_opp_detach_genpd(core->opp_table);
}
-static int core_get_v4(struct device *dev)
+static int core_get_v4(struct venus_core *core)
{
- struct venus_core *core = dev_get_drvdata(dev);
+ struct device *dev = core->dev;
const struct venus_resources *res = core->res;
int ret;
@@ -874,7 +870,7 @@ static int core_get_v4(struct device *dev)
}
}
- ret = vcodec_domains_get(dev);
+ ret = vcodec_domains_get(core);
if (ret) {
if (core->has_opp_table)
dev_pm_opp_of_remove_table(dev);
@@ -885,14 +881,14 @@ static int core_get_v4(struct device *dev)
return 0;
}
-static void core_put_v4(struct device *dev)
+static void core_put_v4(struct venus_core *core)
{
- struct venus_core *core = dev_get_drvdata(dev);
+ struct device *dev = core->dev;
if (legacy_binding)
return;
- vcodec_domains_put(dev);
+ vcodec_domains_put(core);
if (core->has_opp_table)
dev_pm_opp_of_remove_table(dev);
@@ -901,9 +897,9 @@ static void core_put_v4(struct device *dev)
}
-static int core_power_v4(struct device *dev, int on)
+static int core_power_v4(struct venus_core *core, int on)
{
- struct venus_core *core = dev_get_drvdata(dev);
+ struct device *dev = core->dev;
struct device *pmctrl = core->pmdomains[0];
int ret = 0;
diff --git a/drivers/media/platform/qcom/venus/pm_helpers.h b/drivers/media/platform/qcom/venus/pm_helpers.h
index aa2f6afa23544..a492c50c5543c 100644
--- a/drivers/media/platform/qcom/venus/pm_helpers.h
+++ b/drivers/media/platform/qcom/venus/pm_helpers.h
@@ -4,14 +4,15 @@
#define __VENUS_PM_HELPERS_H__
struct device;
+struct venus_core;
#define POWER_ON 1
#define POWER_OFF 0
struct venus_pm_ops {
- int (*core_get)(struct device *dev);
- void (*core_put)(struct device *dev);
- int (*core_power)(struct device *dev, int on);
+ int (*core_get)(struct venus_core *core);
+ void (*core_put)(struct venus_core *core);
+ int (*core_power)(struct venus_core *core, int on);
int (*vdec_get)(struct device *dev);
void (*vdec_put)(struct device *dev);
--
2.34.1
From: Mauro Carvalho Chehab <[email protected]>
[ Upstream commit fae46cb0531b45c789e39128f676f2bafa3a7b47 ]
Changeset 374d62e7aa50 ("media: v4l2-subdev: Verify v4l2_subdev_call() pad config argument")
added an extra verification for a pads parameter for enum mbus
format code.
Such change broke atomisp, because now the V4L2 core
refuses to enum MBUS formats if the state is empty.
So, add .which field in order to select the active formats,
in order to make it work again.
While here, improve error messages.
Fixes: 374d62e7aa50 ("media: v4l2-subdev: Verify v4l2_subdev_call() pad config argument")
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../staging/media/atomisp/pci/atomisp_ioctl.c | 23 ++++++++++++++-----
1 file changed, 17 insertions(+), 6 deletions(-)
diff --git a/drivers/staging/media/atomisp/pci/atomisp_ioctl.c b/drivers/staging/media/atomisp/pci/atomisp_ioctl.c
index 35717a91cbd15..830df02626634 100644
--- a/drivers/staging/media/atomisp/pci/atomisp_ioctl.c
+++ b/drivers/staging/media/atomisp/pci/atomisp_ioctl.c
@@ -773,7 +773,10 @@ static int atomisp_enum_fmt_cap(struct file *file, void *fh,
struct video_device *vdev = video_devdata(file);
struct atomisp_device *isp = video_get_drvdata(vdev);
struct atomisp_sub_device *asd = atomisp_to_video_pipe(vdev)->asd;
- struct v4l2_subdev_mbus_code_enum code = { 0 };
+ struct v4l2_subdev_mbus_code_enum code = {
+ .which = V4L2_SUBDEV_FORMAT_ACTIVE,
+ };
+ struct v4l2_subdev *camera;
unsigned int i, fi = 0;
int rval;
@@ -783,14 +786,20 @@ static int atomisp_enum_fmt_cap(struct file *file, void *fh,
return -EINVAL;
}
+ camera = isp->inputs[asd->input_curr].camera;
+ if(!camera) {
+ dev_err(isp->dev, "%s(): camera is NULL, device is %s\n",
+ __func__, vdev->name);
+ return -EINVAL;
+ }
+
rt_mutex_lock(&isp->mutex);
- rval = v4l2_subdev_call(isp->inputs[asd->input_curr].camera, pad,
- enum_mbus_code, NULL, &code);
+
+ rval = v4l2_subdev_call(camera, pad, enum_mbus_code, NULL, &code);
if (rval == -ENOIOCTLCMD) {
dev_warn(isp->dev,
- "enum_mbus_code pad op not supported. Please fix your sensor driver!\n");
- // rval = v4l2_subdev_call(isp->inputs[asd->input_curr].camera,
- // video, enum_mbus_fmt, 0, &code.code);
+ "enum_mbus_code pad op not supported by %s. Please fix your sensor driver!\n",
+ camera->name);
}
rt_mutex_unlock(&isp->mutex);
@@ -820,6 +829,8 @@ static int atomisp_enum_fmt_cap(struct file *file, void *fh,
f->pixelformat = format->pixelformat;
return 0;
}
+ dev_err(isp->dev, "%s(): format for code %x not found.\n",
+ __func__, code.code);
return -EINVAL;
}
--
2.34.1
From: Zhou Qingyang <[email protected]>
[ Upstream commit b220110e4cd442156f36e1d9b4914bb9e87b0d00 ]
In amdgpu_connector_lcd_native_mode(), the return value of
drm_mode_duplicate() is assigned to mode, and there is a dereference
of it in amdgpu_connector_lcd_native_mode(), which will lead to a NULL
pointer dereference on failure of drm_mode_duplicate().
Fix this bug add a check of mode.
This bug was found by a static analyzer. The analysis employs
differential checking to identify inconsistent security operations
(e.g., checks or kfrees) between two code paths and confirms that the
inconsistent operations are not recovered in the current function or
the callers, so they constitute bugs.
Note that, as a bug found by static analysis, it can be a false
positive or hard to trigger. Multiple researchers have cross-reviewed
the bug.
Builds with CONFIG_DRM_AMDGPU=m show no new warnings, and
our static analyzer no longer warns about this code.
Fixes: d38ceaf99ed0 ("drm/amdgpu: add core driver (v4)")
Signed-off-by: Zhou Qingyang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c
index 0de66f59adb8a..df1f9b88a53f9 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c
@@ -387,6 +387,9 @@ amdgpu_connector_lcd_native_mode(struct drm_encoder *encoder)
native_mode->vdisplay != 0 &&
native_mode->clock != 0) {
mode = drm_mode_duplicate(dev, native_mode);
+ if (!mode)
+ return NULL;
+
mode->type = DRM_MODE_TYPE_PREFERRED | DRM_MODE_TYPE_DRIVER;
drm_mode_set_name(mode);
@@ -401,6 +404,9 @@ amdgpu_connector_lcd_native_mode(struct drm_encoder *encoder)
* simpler.
*/
mode = drm_cvt_mode(dev, native_mode->hdisplay, native_mode->vdisplay, 60, true, false, false);
+ if (!mode)
+ return NULL;
+
mode->type = DRM_MODE_TYPE_PREFERRED | DRM_MODE_TYPE_DRIVER;
DRM_DEBUG_KMS("Adding cvt approximation of native panel mode %s\n", mode->name);
}
--
2.34.1
From: Yang Yingliang <[email protected]>
[ Upstream commit e730cd57ac2dfe94bca0f14a3be8e1b21de41a9c ]
Some variables are leaked in the error handling in alloc_rtllib(), free
the variables in the error path.
Fixes: 94a799425eee ("From: wlanfae <[email protected]>")
Reviewed-by: Dan Carpenter <[email protected]>
Reviewed-by: Pavel Skripkin <[email protected]>
Signed-off-by: Yang Yingliang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/staging/rtl8192e/rtllib_module.c | 16 ++++++++++++----
1 file changed, 12 insertions(+), 4 deletions(-)
diff --git a/drivers/staging/rtl8192e/rtllib_module.c b/drivers/staging/rtl8192e/rtllib_module.c
index 64d9feee1f392..f00ac94b2639b 100644
--- a/drivers/staging/rtl8192e/rtllib_module.c
+++ b/drivers/staging/rtl8192e/rtllib_module.c
@@ -88,7 +88,7 @@ struct net_device *alloc_rtllib(int sizeof_priv)
err = rtllib_networks_allocate(ieee);
if (err) {
pr_err("Unable to allocate beacon storage: %d\n", err);
- goto failed;
+ goto free_netdev;
}
rtllib_networks_initialize(ieee);
@@ -121,11 +121,13 @@ struct net_device *alloc_rtllib(int sizeof_priv)
ieee->hwsec_active = 0;
memset(ieee->swcamtable, 0, sizeof(struct sw_cam_table) * 32);
- rtllib_softmac_init(ieee);
+ err = rtllib_softmac_init(ieee);
+ if (err)
+ goto free_crypt_info;
ieee->pHTInfo = kzalloc(sizeof(struct rt_hi_throughput), GFP_KERNEL);
if (!ieee->pHTInfo)
- return NULL;
+ goto free_softmac;
HTUpdateDefaultSetting(ieee);
HTInitializeHTInfo(ieee);
@@ -141,8 +143,14 @@ struct net_device *alloc_rtllib(int sizeof_priv)
return dev;
- failed:
+free_softmac:
+ rtllib_softmac_free(ieee);
+free_crypt_info:
+ lib80211_crypt_info_free(&ieee->crypt_info);
+ rtllib_networks_free(ieee);
+free_netdev:
free_netdev(dev);
+
return NULL;
}
EXPORT_SYMBOL(alloc_rtllib);
--
2.34.1
From: Nishanth Menon <[email protected]>
[ Upstream commit e9ba3a5bc6fdc2c796c69fdaf5ed6c9957cf9f9d ]
A72's L2 cache[1] on J721e[2] is 1MB. A72's L2 is fixed line length of
64 bytes and 16-way set-associative cache structure.
1MB of L2 / 64 (line length) = 16384 ways
16384 ways / 16 = 1024 sets
Fix the l2 cache-sets.
[1] https://developer.arm.com/documentation/100095/0003/Level-2-Memory-System/About-the-L2-memory-system
[2] http://www.ti.com/lit/pdf/spruil1
Fixes: 2d87061e70de ("arm64: dts: ti: Add Support for J721E SoC")
Reported-by: Peng Fan <[email protected]>
Signed-off-by: Nishanth Menon <[email protected]>
Reviewed-by: Pratyush Yadav <[email protected]>
Signed-off-by: Vignesh Raghavendra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/ti/k3-j721e.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/ti/k3-j721e.dtsi b/arch/arm64/boot/dts/ti/k3-j721e.dtsi
index d1ef9fbe4981d..a199227327ed2 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e.dtsi
@@ -85,7 +85,7 @@
cache-level = <2>;
cache-size = <0x100000>;
cache-line-size = <64>;
- cache-sets = <2048>;
+ cache-sets = <1024>;
next-level-cache = <&msmc_l3>;
};
--
2.34.1
From: Oleksij Rempel <[email protected]>
[ Upstream commit 4cf2ddf16e175ee18c5c29865c32da7d6269cf44 ]
Starting with commit d92ed2c9d3ff ("thermal: imx: Use driver's local
data to decide whether to run a measurement") this driver stared using
irq_enabled flag to make decision to power on/off the thermal
core. This triggered a regression, where after reaching critical
temperature, alarm IRQ handler set irq_enabled to false, disabled
thermal core and was not able read temperature and disable cooling
sequence.
In case the cooling device is "CPU/GPU freq", the system will run with
reduce performance until next reboot.
To solve this issue, we need to move all parts implementing hand made
runtime power management and let it handle actual runtime PM framework.
Fixes: d92ed2c9d3ff ("thermal: imx: Use driver's local data to decide whether to run a measurement")
Signed-off-by: Oleksij Rempel <[email protected]>
Tested-by: Petr Beneš <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Daniel Lezcano <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/thermal/imx_thermal.c | 145 +++++++++++++++++++++-------------
1 file changed, 91 insertions(+), 54 deletions(-)
diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c
index 2c7473d86a59b..16663373b6829 100644
--- a/drivers/thermal/imx_thermal.c
+++ b/drivers/thermal/imx_thermal.c
@@ -15,6 +15,7 @@
#include <linux/regmap.h>
#include <linux/thermal.h>
#include <linux/nvmem-consumer.h>
+#include <linux/pm_runtime.h>
#define REG_SET 0x4
#define REG_CLR 0x8
@@ -194,6 +195,7 @@ static struct thermal_soc_data thermal_imx7d_data = {
};
struct imx_thermal_data {
+ struct device *dev;
struct cpufreq_policy *policy;
struct thermal_zone_device *tz;
struct thermal_cooling_device *cdev;
@@ -252,44 +254,15 @@ static int imx_get_temp(struct thermal_zone_device *tz, int *temp)
const struct thermal_soc_data *soc_data = data->socdata;
struct regmap *map = data->tempmon;
unsigned int n_meas;
- bool wait, run_measurement;
u32 val;
+ int ret;
- run_measurement = !data->irq_enabled;
- if (!run_measurement) {
- /* Check if a measurement is currently in progress */
- regmap_read(map, soc_data->temp_data, &val);
- wait = !(val & soc_data->temp_valid_mask);
- } else {
- /*
- * Every time we measure the temperature, we will power on the
- * temperature sensor, enable measurements, take a reading,
- * disable measurements, power off the temperature sensor.
- */
- regmap_write(map, soc_data->sensor_ctrl + REG_CLR,
- soc_data->power_down_mask);
- regmap_write(map, soc_data->sensor_ctrl + REG_SET,
- soc_data->measure_temp_mask);
-
- wait = true;
- }
-
- /*
- * According to the temp sensor designers, it may require up to ~17us
- * to complete a measurement.
- */
- if (wait)
- usleep_range(20, 50);
+ ret = pm_runtime_resume_and_get(data->dev);
+ if (ret < 0)
+ return ret;
regmap_read(map, soc_data->temp_data, &val);
- if (run_measurement) {
- regmap_write(map, soc_data->sensor_ctrl + REG_CLR,
- soc_data->measure_temp_mask);
- regmap_write(map, soc_data->sensor_ctrl + REG_SET,
- soc_data->power_down_mask);
- }
-
if ((val & soc_data->temp_valid_mask) == 0) {
dev_dbg(&tz->device, "temp measurement never finished\n");
return -EAGAIN;
@@ -328,6 +301,8 @@ static int imx_get_temp(struct thermal_zone_device *tz, int *temp)
enable_irq(data->irq);
}
+ pm_runtime_put(data->dev);
+
return 0;
}
@@ -335,24 +310,16 @@ static int imx_change_mode(struct thermal_zone_device *tz,
enum thermal_device_mode mode)
{
struct imx_thermal_data *data = tz->devdata;
- struct regmap *map = data->tempmon;
- const struct thermal_soc_data *soc_data = data->socdata;
if (mode == THERMAL_DEVICE_ENABLED) {
- regmap_write(map, soc_data->sensor_ctrl + REG_CLR,
- soc_data->power_down_mask);
- regmap_write(map, soc_data->sensor_ctrl + REG_SET,
- soc_data->measure_temp_mask);
+ pm_runtime_get(data->dev);
if (!data->irq_enabled) {
data->irq_enabled = true;
enable_irq(data->irq);
}
} else {
- regmap_write(map, soc_data->sensor_ctrl + REG_CLR,
- soc_data->measure_temp_mask);
- regmap_write(map, soc_data->sensor_ctrl + REG_SET,
- soc_data->power_down_mask);
+ pm_runtime_put(data->dev);
if (data->irq_enabled) {
disable_irq(data->irq);
@@ -393,6 +360,11 @@ static int imx_set_trip_temp(struct thermal_zone_device *tz, int trip,
int temp)
{
struct imx_thermal_data *data = tz->devdata;
+ int ret;
+
+ ret = pm_runtime_resume_and_get(data->dev);
+ if (ret < 0)
+ return ret;
/* do not allow changing critical threshold */
if (trip == IMX_TRIP_CRITICAL)
@@ -406,6 +378,8 @@ static int imx_set_trip_temp(struct thermal_zone_device *tz, int trip,
imx_set_alarm_temp(data, temp);
+ pm_runtime_put(data->dev);
+
return 0;
}
@@ -681,6 +655,8 @@ static int imx_thermal_probe(struct platform_device *pdev)
if (!data)
return -ENOMEM;
+ data->dev = &pdev->dev;
+
map = syscon_regmap_lookup_by_phandle(pdev->dev.of_node, "fsl,tempmon");
if (IS_ERR(map)) {
ret = PTR_ERR(map);
@@ -800,6 +776,16 @@ static int imx_thermal_probe(struct platform_device *pdev)
data->socdata->power_down_mask);
regmap_write(map, data->socdata->sensor_ctrl + REG_SET,
data->socdata->measure_temp_mask);
+ /* After power up, we need a delay before first access can be done. */
+ usleep_range(20, 50);
+
+ /* the core was configured and enabled just before */
+ pm_runtime_set_active(&pdev->dev);
+ pm_runtime_enable(data->dev);
+
+ ret = pm_runtime_resume_and_get(data->dev);
+ if (ret < 0)
+ goto disable_runtime_pm;
data->irq_enabled = true;
ret = thermal_zone_device_enable(data->tz);
@@ -814,10 +800,15 @@ static int imx_thermal_probe(struct platform_device *pdev)
goto thermal_zone_unregister;
}
+ pm_runtime_put(data->dev);
+
return 0;
thermal_zone_unregister:
thermal_zone_device_unregister(data->tz);
+disable_runtime_pm:
+ pm_runtime_put_noidle(data->dev);
+ pm_runtime_disable(data->dev);
clk_disable:
clk_disable_unprepare(data->thermal_clk);
legacy_cleanup:
@@ -829,13 +820,9 @@ legacy_cleanup:
static int imx_thermal_remove(struct platform_device *pdev)
{
struct imx_thermal_data *data = platform_get_drvdata(pdev);
- struct regmap *map = data->tempmon;
- /* Disable measurements */
- regmap_write(map, data->socdata->sensor_ctrl + REG_SET,
- data->socdata->power_down_mask);
- if (!IS_ERR(data->thermal_clk))
- clk_disable_unprepare(data->thermal_clk);
+ pm_runtime_put_noidle(data->dev);
+ pm_runtime_disable(data->dev);
thermal_zone_device_unregister(data->tz);
imx_thermal_unregister_legacy_cooling(data);
@@ -858,29 +845,79 @@ static int __maybe_unused imx_thermal_suspend(struct device *dev)
ret = thermal_zone_device_disable(data->tz);
if (ret)
return ret;
+
+ return pm_runtime_force_suspend(data->dev);
+}
+
+static int __maybe_unused imx_thermal_resume(struct device *dev)
+{
+ struct imx_thermal_data *data = dev_get_drvdata(dev);
+ int ret;
+
+ ret = pm_runtime_force_resume(data->dev);
+ if (ret)
+ return ret;
+ /* Enabled thermal sensor after resume */
+ return thermal_zone_device_enable(data->tz);
+}
+
+static int __maybe_unused imx_thermal_runtime_suspend(struct device *dev)
+{
+ struct imx_thermal_data *data = dev_get_drvdata(dev);
+ const struct thermal_soc_data *socdata = data->socdata;
+ struct regmap *map = data->tempmon;
+ int ret;
+
+ ret = regmap_write(map, socdata->sensor_ctrl + REG_CLR,
+ socdata->measure_temp_mask);
+ if (ret)
+ return ret;
+
+ ret = regmap_write(map, socdata->sensor_ctrl + REG_SET,
+ socdata->power_down_mask);
+ if (ret)
+ return ret;
+
clk_disable_unprepare(data->thermal_clk);
return 0;
}
-static int __maybe_unused imx_thermal_resume(struct device *dev)
+static int __maybe_unused imx_thermal_runtime_resume(struct device *dev)
{
struct imx_thermal_data *data = dev_get_drvdata(dev);
+ const struct thermal_soc_data *socdata = data->socdata;
+ struct regmap *map = data->tempmon;
int ret;
ret = clk_prepare_enable(data->thermal_clk);
if (ret)
return ret;
- /* Enabled thermal sensor after resume */
- ret = thermal_zone_device_enable(data->tz);
+
+ ret = regmap_write(map, socdata->sensor_ctrl + REG_CLR,
+ socdata->power_down_mask);
+ if (ret)
+ return ret;
+
+ ret = regmap_write(map, socdata->sensor_ctrl + REG_SET,
+ socdata->measure_temp_mask);
if (ret)
return ret;
+ /*
+ * According to the temp sensor designers, it may require up to ~17us
+ * to complete a measurement.
+ */
+ usleep_range(20, 50);
+
return 0;
}
-static SIMPLE_DEV_PM_OPS(imx_thermal_pm_ops,
- imx_thermal_suspend, imx_thermal_resume);
+static const struct dev_pm_ops imx_thermal_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(imx_thermal_suspend, imx_thermal_resume)
+ SET_RUNTIME_PM_OPS(imx_thermal_runtime_suspend,
+ imx_thermal_runtime_resume, NULL)
+};
static struct platform_driver imx_thermal = {
.driver = {
--
2.34.1
From: Lino Sanfilippo <[email protected]>
[ Upstream commit d1180405c7b5c7a1c6bde79d5fc24fe931430737 ]
With commit 3873e2d7f63a ("drivers: PL011: refactor pl011_probe()") the
function devm_ioremap() called from pl011_setup_port() was replaced with
devm_ioremap_resource(). Since this function not only remaps but also
requests the ports io memory region it now collides with the .config_port()
callback which requests the same region at uart port registration.
Since devm_ioremap_resource() already claims the memory successfully, the
request in .config_port() fails.
Later at uart port deregistration the attempt to release the unclaimed
memory also fails. The failure results in a “Trying to free nonexistent
resource" warning.
Fix these issues by removing the callbacks that implement the redundant
memory allocation/release. Also make sure that changing the drivers io
memory base address via TIOCSSERIAL is not allowed any more.
Fixes: 3873e2d7f63a ("drivers: PL011: refactor pl011_probe()")
Signed-off-by: Lino Sanfilippo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/tty/serial/amba-pl011.c | 27 +++------------------------
1 file changed, 3 insertions(+), 24 deletions(-)
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index b3cddcdcbdad0..61183e7ff0097 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -2083,32 +2083,13 @@ static const char *pl011_type(struct uart_port *port)
return uap->port.type == PORT_AMBA ? uap->type : NULL;
}
-/*
- * Release the memory region(s) being used by 'port'
- */
-static void pl011_release_port(struct uart_port *port)
-{
- release_mem_region(port->mapbase, SZ_4K);
-}
-
-/*
- * Request the memory region(s) being used by 'port'
- */
-static int pl011_request_port(struct uart_port *port)
-{
- return request_mem_region(port->mapbase, SZ_4K, "uart-pl011")
- != NULL ? 0 : -EBUSY;
-}
-
/*
* Configure/autoconfigure the port.
*/
static void pl011_config_port(struct uart_port *port, int flags)
{
- if (flags & UART_CONFIG_TYPE) {
+ if (flags & UART_CONFIG_TYPE)
port->type = PORT_AMBA;
- pl011_request_port(port);
- }
}
/*
@@ -2123,6 +2104,8 @@ static int pl011_verify_port(struct uart_port *port, struct serial_struct *ser)
ret = -EINVAL;
if (ser->baud_base < 9600)
ret = -EINVAL;
+ if (port->mapbase != (unsigned long) ser->iomem_base)
+ ret = -EINVAL;
return ret;
}
@@ -2140,8 +2123,6 @@ static const struct uart_ops amba_pl011_pops = {
.flush_buffer = pl011_dma_flush_buffer,
.set_termios = pl011_set_termios,
.type = pl011_type,
- .release_port = pl011_release_port,
- .request_port = pl011_request_port,
.config_port = pl011_config_port,
.verify_port = pl011_verify_port,
#ifdef CONFIG_CONSOLE_POLL
@@ -2171,8 +2152,6 @@ static const struct uart_ops sbsa_uart_pops = {
.shutdown = sbsa_uart_shutdown,
.set_termios = sbsa_uart_set_termios,
.type = pl011_type,
- .release_port = pl011_release_port,
- .request_port = pl011_request_port,
.config_port = pl011_config_port,
.verify_port = pl011_verify_port,
#ifdef CONFIG_CONSOLE_POLL
--
2.34.1
From: Giovanni Cabiddu <[email protected]>
[ Upstream commit 5002200b4fedd7e90e4fbc2e5c42a4b3351df814 ]
If the remote function did not ACK the reception of a message, the
function __adf_iov_putmsg() could detect it as a collision.
This was due to the fact that the collision and the timeout checks after
the ACK loop were in the wrong order. The timeout must be checked at the
end of the loop, so fix by swapping the order of the two checks.
Fixes: 9b768e8a3909 ("crypto: qat - detect PFVF collision after ACK")
Signed-off-by: Giovanni Cabiddu <[email protected]>
Co-developed-by: Marco Chiappero <[email protected]>
Signed-off-by: Marco Chiappero <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/crypto/qat/qat_common/adf_pf2vf_msg.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/crypto/qat/qat_common/adf_pf2vf_msg.c b/drivers/crypto/qat/qat_common/adf_pf2vf_msg.c
index 7b34273d18937..74afafc84c716 100644
--- a/drivers/crypto/qat/qat_common/adf_pf2vf_msg.c
+++ b/drivers/crypto/qat/qat_common/adf_pf2vf_msg.c
@@ -132,6 +132,12 @@ static int __adf_iov_putmsg(struct adf_accel_dev *accel_dev, u32 msg, u8 vf_nr)
val = ADF_CSR_RD(pmisc_bar_addr, pf2vf_offset);
} while ((val & int_bit) && (count++ < ADF_IOV_MSG_ACK_MAX_RETRY));
+ if (val & int_bit) {
+ dev_dbg(&GET_DEV(accel_dev), "ACK not received from remote\n");
+ val &= ~int_bit;
+ ret = -EIO;
+ }
+
if (val != msg) {
dev_dbg(&GET_DEV(accel_dev),
"Collision - PFVF CSR overwritten by remote function\n");
@@ -139,12 +145,6 @@ static int __adf_iov_putmsg(struct adf_accel_dev *accel_dev, u32 msg, u8 vf_nr)
goto out;
}
- if (val & int_bit) {
- dev_dbg(&GET_DEV(accel_dev), "ACK not received from remote\n");
- val &= ~int_bit;
- ret = -EIO;
- }
-
/* Finished with the PFVF CSR; relinquish it and leave msg in CSR */
ADF_CSR_WR(pmisc_bar_addr, pf2vf_offset, val & ~local_in_use_mask);
out:
--
2.34.1
From: Alexei Starovoitov <[email protected]>
[ Upstream commit c5a2d43e998a821701029f23e25b62f9188e93ff ]
Make BTF log size limit to be the same as the verifier log size limit.
Otherwise tools that progressively increase log size and use the same log
for BTF loading and program loading will be hitting hard to debug EINVAL.
Signed-off-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/bpf/btf.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/kernel/bpf/btf.c b/kernel/bpf/btf.c
index aaf2fbaa0cc76..72534a6f4b96e 100644
--- a/kernel/bpf/btf.c
+++ b/kernel/bpf/btf.c
@@ -4135,7 +4135,7 @@ static struct btf *btf_parse(void __user *btf_data, u32 btf_data_size,
log->len_total = log_size;
/* log attributes have to be sane */
- if (log->len_total < 128 || log->len_total > UINT_MAX >> 8 ||
+ if (log->len_total < 128 || log->len_total > UINT_MAX >> 2 ||
!log->level || !log->ubuf) {
err = -EINVAL;
goto errout;
--
2.34.1
From: Claudiu Beznea <[email protected]>
[ Upstream commit 8c0fad75dcaa650e3f3145a2c35847bc6a65cb7f ]
Remove compilation flag and use __maybe_unused and pm_ptr instead.
Signed-off-by: Claudiu Beznea <[email protected]>
Acked-by: Nicolas Ferre <[email protected]>
Signed-off-by: Lee Jones <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mfd/atmel-flexcom.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/drivers/mfd/atmel-flexcom.c b/drivers/mfd/atmel-flexcom.c
index d2f5c073fdf31..962f66dc8813e 100644
--- a/drivers/mfd/atmel-flexcom.c
+++ b/drivers/mfd/atmel-flexcom.c
@@ -87,8 +87,7 @@ static const struct of_device_id atmel_flexcom_of_match[] = {
};
MODULE_DEVICE_TABLE(of, atmel_flexcom_of_match);
-#ifdef CONFIG_PM_SLEEP
-static int atmel_flexcom_resume(struct device *dev)
+static int __maybe_unused atmel_flexcom_resume(struct device *dev)
{
struct atmel_flexcom *ddata = dev_get_drvdata(dev);
int err;
@@ -105,7 +104,6 @@ static int atmel_flexcom_resume(struct device *dev)
return 0;
}
-#endif
static SIMPLE_DEV_PM_OPS(atmel_flexcom_pm_ops, NULL,
atmel_flexcom_resume);
@@ -114,7 +112,7 @@ static struct platform_driver atmel_flexcom_driver = {
.probe = atmel_flexcom_probe,
.driver = {
.name = "atmel_flexcom",
- .pm = &atmel_flexcom_pm_ops,
+ .pm = pm_ptr(&atmel_flexcom_pm_ops),
.of_match_table = atmel_flexcom_of_match,
},
};
--
2.34.1
From: Peng Fan <[email protected]>
[ Upstream commit 7a0df1f969c14939f60a7f9a6af72adcc314675f ]
A72 Cluster has 48KB Icache, 32KB Dcache and 1MB L2 Cache
- ICache is 3-way set-associative
- Dcache is 2-way set-associative
- Line size are 64bytes
So correct the cache-sets info.
Fixes: 2d87061e70dea ("arm64: dts: ti: Add Support for J721E SoC")
Signed-off-by: Peng Fan <[email protected]>
Reviewed-by: Nishanth Menon <[email protected]>
Signed-off-by: Vignesh Raghavendra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/ti/k3-j721e.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-j721e.dtsi b/arch/arm64/boot/dts/ti/k3-j721e.dtsi
index cc483f7344af3..d1ef9fbe4981d 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e.dtsi
@@ -61,7 +61,7 @@
i-cache-sets = <256>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
- d-cache-sets = <128>;
+ d-cache-sets = <256>;
next-level-cache = <&L2_0>;
};
@@ -75,7 +75,7 @@
i-cache-sets = <256>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
- d-cache-sets = <128>;
+ d-cache-sets = <256>;
next-level-cache = <&L2_0>;
};
};
--
2.34.1
From: Fabio Estevam <[email protected]>
[ Upstream commit ed2f97ad4b21072f849cf4ae6645d1f2b1d3f550 ]
After devm_request_threaded_irq() is called there is a chance that an
interrupt may occur before the spinlock is initialized, which will trigger
a kernel oops.
To prevent that, move the initialization of the spinlock prior to
requesting the interrupts.
Fixes: 51abcf7fdb70 ("media: imx-pxp: add i.MX Pixel Pipeline driver")
Signed-off-by: Fabio Estevam <[email protected]>
Reviewed-by: Philipp Zabel <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/platform/imx-pxp.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/media/platform/imx-pxp.c b/drivers/media/platform/imx-pxp.c
index 08d76eb05ed1a..62356adebc39e 100644
--- a/drivers/media/platform/imx-pxp.c
+++ b/drivers/media/platform/imx-pxp.c
@@ -1664,6 +1664,8 @@ static int pxp_probe(struct platform_device *pdev)
if (irq < 0)
return irq;
+ spin_lock_init(&dev->irqlock);
+
ret = devm_request_threaded_irq(&pdev->dev, irq, NULL, pxp_irq_handler,
IRQF_ONESHOT, dev_name(&pdev->dev), dev);
if (ret < 0) {
@@ -1681,8 +1683,6 @@ static int pxp_probe(struct platform_device *pdev)
goto err_clk;
}
- spin_lock_init(&dev->irqlock);
-
ret = v4l2_device_register(&pdev->dev, &dev->v4l2_dev);
if (ret)
goto err_clk;
--
2.34.1
From: Kees Cook <[email protected]>
[ Upstream commit 61646ca83d3889696f2772edaff122dd96a2935e ]
When building with automatic stack variable initialization, GCC 12
complains about variables defined outside of switch case statements.
Move the variable into the case that uses it, which silences the warning:
./arch/x86/include/asm/uaccess.h:317:23: warning: statement will never be executed [-Wswitch-unreachable]
317 | unsigned char x_u8__; \
| ^~~~~~
Fixes: 865c50e1d279 ("x86/uaccess: utilize CONFIG_CC_HAS_ASM_GOTO_OUTPUT")
Signed-off-by: Kees Cook <[email protected]>
Signed-off-by: Dave Hansen <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/include/asm/uaccess.h | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/arch/x86/include/asm/uaccess.h b/arch/x86/include/asm/uaccess.h
index 5c95d242f38d7..bb1430283c726 100644
--- a/arch/x86/include/asm/uaccess.h
+++ b/arch/x86/include/asm/uaccess.h
@@ -314,11 +314,12 @@ do { \
do { \
__chk_user_ptr(ptr); \
switch (size) { \
- unsigned char x_u8__; \
- case 1: \
+ case 1: { \
+ unsigned char x_u8__; \
__get_user_asm(x_u8__, ptr, "b", "=q", label); \
(x) = x_u8__; \
break; \
+ } \
case 2: \
__get_user_asm(x, ptr, "w", "=r", label); \
break; \
--
2.34.1
From: Herbert Xu <[email protected]>
[ Upstream commit 81064c96d88180ad6995d52419e94a78968308a2 ]
This patch changes the cast in stm32_cryp_check_ctr_counter from
u32 to __be32 to match the prototype of stm32_cryp_hw_write_iv
correctly.
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/crypto/stm32/stm32-cryp.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/crypto/stm32/stm32-cryp.c b/drivers/crypto/stm32/stm32-cryp.c
index 7999b26a16ed0..7389a0536ff02 100644
--- a/drivers/crypto/stm32/stm32-cryp.c
+++ b/drivers/crypto/stm32/stm32-cryp.c
@@ -1229,7 +1229,7 @@ static void stm32_cryp_check_ctr_counter(struct stm32_cryp *cryp)
cr = stm32_cryp_read(cryp, CRYP_CR);
stm32_cryp_write(cryp, CRYP_CR, cr & ~CR_CRYPEN);
- stm32_cryp_hw_write_iv(cryp, (u32 *)cryp->last_ctr);
+ stm32_cryp_hw_write_iv(cryp, (__be32 *)cryp->last_ctr);
stm32_cryp_write(cryp, CRYP_CR, cr);
}
--
2.34.1
From: Nicolas Toromanoff <[email protected]>
[ Upstream commit 39e6e699c7fb92bdb2617b596ca4a4ea35c5d2a7 ]
Some auto tests failed because driver wasn't returning the expected
error with some input size/iv value/tag size.
Now:
Return 0 early for empty buffer. (We don't need to start the engine for
an empty input buffer).
Accept any valid authsize for gcm(aes).
Return -EINVAL if iv for ccm(aes) is invalid.
Return -EINVAL if buffer size is a not a multiple of algorithm block size.
Fixes: 9e054ec21ef8 ("crypto: stm32 - Support for STM32 CRYP crypto module")
Signed-off-by: Nicolas Toromanoff <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/crypto/stm32/stm32-cryp.c | 114 +++++++++++++++++++++++++++++-
1 file changed, 113 insertions(+), 1 deletion(-)
diff --git a/drivers/crypto/stm32/stm32-cryp.c b/drivers/crypto/stm32/stm32-cryp.c
index e2bcc4f98b0ae..fd7fb73a4d450 100644
--- a/drivers/crypto/stm32/stm32-cryp.c
+++ b/drivers/crypto/stm32/stm32-cryp.c
@@ -799,7 +799,20 @@ static int stm32_cryp_aes_aead_setkey(struct crypto_aead *tfm, const u8 *key,
static int stm32_cryp_aes_gcm_setauthsize(struct crypto_aead *tfm,
unsigned int authsize)
{
- return authsize == AES_BLOCK_SIZE ? 0 : -EINVAL;
+ switch (authsize) {
+ case 4:
+ case 8:
+ case 12:
+ case 13:
+ case 14:
+ case 15:
+ case 16:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
}
static int stm32_cryp_aes_ccm_setauthsize(struct crypto_aead *tfm,
@@ -823,31 +836,61 @@ static int stm32_cryp_aes_ccm_setauthsize(struct crypto_aead *tfm,
static int stm32_cryp_aes_ecb_encrypt(struct skcipher_request *req)
{
+ if (req->cryptlen % AES_BLOCK_SIZE)
+ return -EINVAL;
+
+ if (req->cryptlen == 0)
+ return 0;
+
return stm32_cryp_crypt(req, FLG_AES | FLG_ECB | FLG_ENCRYPT);
}
static int stm32_cryp_aes_ecb_decrypt(struct skcipher_request *req)
{
+ if (req->cryptlen % AES_BLOCK_SIZE)
+ return -EINVAL;
+
+ if (req->cryptlen == 0)
+ return 0;
+
return stm32_cryp_crypt(req, FLG_AES | FLG_ECB);
}
static int stm32_cryp_aes_cbc_encrypt(struct skcipher_request *req)
{
+ if (req->cryptlen % AES_BLOCK_SIZE)
+ return -EINVAL;
+
+ if (req->cryptlen == 0)
+ return 0;
+
return stm32_cryp_crypt(req, FLG_AES | FLG_CBC | FLG_ENCRYPT);
}
static int stm32_cryp_aes_cbc_decrypt(struct skcipher_request *req)
{
+ if (req->cryptlen % AES_BLOCK_SIZE)
+ return -EINVAL;
+
+ if (req->cryptlen == 0)
+ return 0;
+
return stm32_cryp_crypt(req, FLG_AES | FLG_CBC);
}
static int stm32_cryp_aes_ctr_encrypt(struct skcipher_request *req)
{
+ if (req->cryptlen == 0)
+ return 0;
+
return stm32_cryp_crypt(req, FLG_AES | FLG_CTR | FLG_ENCRYPT);
}
static int stm32_cryp_aes_ctr_decrypt(struct skcipher_request *req)
{
+ if (req->cryptlen == 0)
+ return 0;
+
return stm32_cryp_crypt(req, FLG_AES | FLG_CTR);
}
@@ -861,53 +904,122 @@ static int stm32_cryp_aes_gcm_decrypt(struct aead_request *req)
return stm32_cryp_aead_crypt(req, FLG_AES | FLG_GCM);
}
+static inline int crypto_ccm_check_iv(const u8 *iv)
+{
+ /* 2 <= L <= 8, so 1 <= L' <= 7. */
+ if (iv[0] < 1 || iv[0] > 7)
+ return -EINVAL;
+
+ return 0;
+}
+
static int stm32_cryp_aes_ccm_encrypt(struct aead_request *req)
{
+ int err;
+
+ err = crypto_ccm_check_iv(req->iv);
+ if (err)
+ return err;
+
return stm32_cryp_aead_crypt(req, FLG_AES | FLG_CCM | FLG_ENCRYPT);
}
static int stm32_cryp_aes_ccm_decrypt(struct aead_request *req)
{
+ int err;
+
+ err = crypto_ccm_check_iv(req->iv);
+ if (err)
+ return err;
+
return stm32_cryp_aead_crypt(req, FLG_AES | FLG_CCM);
}
static int stm32_cryp_des_ecb_encrypt(struct skcipher_request *req)
{
+ if (req->cryptlen % DES_BLOCK_SIZE)
+ return -EINVAL;
+
+ if (req->cryptlen == 0)
+ return 0;
+
return stm32_cryp_crypt(req, FLG_DES | FLG_ECB | FLG_ENCRYPT);
}
static int stm32_cryp_des_ecb_decrypt(struct skcipher_request *req)
{
+ if (req->cryptlen % DES_BLOCK_SIZE)
+ return -EINVAL;
+
+ if (req->cryptlen == 0)
+ return 0;
+
return stm32_cryp_crypt(req, FLG_DES | FLG_ECB);
}
static int stm32_cryp_des_cbc_encrypt(struct skcipher_request *req)
{
+ if (req->cryptlen % DES_BLOCK_SIZE)
+ return -EINVAL;
+
+ if (req->cryptlen == 0)
+ return 0;
+
return stm32_cryp_crypt(req, FLG_DES | FLG_CBC | FLG_ENCRYPT);
}
static int stm32_cryp_des_cbc_decrypt(struct skcipher_request *req)
{
+ if (req->cryptlen % DES_BLOCK_SIZE)
+ return -EINVAL;
+
+ if (req->cryptlen == 0)
+ return 0;
+
return stm32_cryp_crypt(req, FLG_DES | FLG_CBC);
}
static int stm32_cryp_tdes_ecb_encrypt(struct skcipher_request *req)
{
+ if (req->cryptlen % DES_BLOCK_SIZE)
+ return -EINVAL;
+
+ if (req->cryptlen == 0)
+ return 0;
+
return stm32_cryp_crypt(req, FLG_TDES | FLG_ECB | FLG_ENCRYPT);
}
static int stm32_cryp_tdes_ecb_decrypt(struct skcipher_request *req)
{
+ if (req->cryptlen % DES_BLOCK_SIZE)
+ return -EINVAL;
+
+ if (req->cryptlen == 0)
+ return 0;
+
return stm32_cryp_crypt(req, FLG_TDES | FLG_ECB);
}
static int stm32_cryp_tdes_cbc_encrypt(struct skcipher_request *req)
{
+ if (req->cryptlen % DES_BLOCK_SIZE)
+ return -EINVAL;
+
+ if (req->cryptlen == 0)
+ return 0;
+
return stm32_cryp_crypt(req, FLG_TDES | FLG_CBC | FLG_ENCRYPT);
}
static int stm32_cryp_tdes_cbc_decrypt(struct skcipher_request *req)
{
+ if (req->cryptlen % DES_BLOCK_SIZE)
+ return -EINVAL;
+
+ if (req->cryptlen == 0)
+ return 0;
+
return stm32_cryp_crypt(req, FLG_TDES | FLG_CBC);
}
--
2.34.1
From: Suresh Udipi <[email protected]>
[ Upstream commit cee44d4fbacbbdfe62697ec94e76c6e4f726c5df ]
hsfreqrange should be chosen based on the calculated mbps which
is closer to the default bit rate and within the range as per
table[1]. But current calculation always selects first value which
is greater than or equal to the calculated mbps which may lead
to chosing a wrong range in some cases.
For example for 360 mbps for H3/M3N
Existing logic selects
Calculated value 360Mbps : Default 400Mbps Range [368.125 -433.125 mbps]
This hsfreqrange is out of range.
The logic is changed to get the default value which is closest to the
calculated value [1]
Calculated value 360Mbps : Default 350Mbps Range [320.625 -380.625 mpbs]
[1] specs r19uh0105ej0200-r-car-3rd-generation.pdf [Table 25.9]
Please note that According to Renesas in Table 25.9 the range for
220 default value is corrected as below
|Range (Mbps) | Default Bit rate (Mbps) |
-----------------------------------------------
| 197.125-244.125 | 220 |
-----------------------------------------------
Fixes: 769afd212b16 ("media: rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver driver")
Signed-off-by: Suresh Udipi <[email protected]>
Signed-off-by: Kazuyoshi Akiyama <[email protected]>
Signed-off-by: Michael Rodin <[email protected]>
Reviewed-by: Niklas Söderlund <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/platform/rcar-vin/rcar-csi2.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/media/platform/rcar-vin/rcar-csi2.c b/drivers/media/platform/rcar-vin/rcar-csi2.c
index d2d87a204e918..6fb8efcb40444 100644
--- a/drivers/media/platform/rcar-vin/rcar-csi2.c
+++ b/drivers/media/platform/rcar-vin/rcar-csi2.c
@@ -436,16 +436,23 @@ static int rcsi2_wait_phy_start(struct rcar_csi2 *priv,
static int rcsi2_set_phypll(struct rcar_csi2 *priv, unsigned int mbps)
{
const struct rcsi2_mbps_reg *hsfreq;
+ const struct rcsi2_mbps_reg *hsfreq_prev = NULL;
- for (hsfreq = priv->info->hsfreqrange; hsfreq->mbps != 0; hsfreq++)
+ for (hsfreq = priv->info->hsfreqrange; hsfreq->mbps != 0; hsfreq++) {
if (hsfreq->mbps >= mbps)
break;
+ hsfreq_prev = hsfreq;
+ }
if (!hsfreq->mbps) {
dev_err(priv->dev, "Unsupported PHY speed (%u Mbps)", mbps);
return -ERANGE;
}
+ if (hsfreq_prev &&
+ ((mbps - hsfreq_prev->mbps) <= (hsfreq->mbps - mbps)))
+ hsfreq = hsfreq_prev;
+
rcsi2_write(priv, PHYPLL_REG, PHYPLL_HSFREQRANGE(hsfreq->reg));
return 0;
--
2.34.1
From: Yang Yingliang <[email protected]>
[ Upstream commit 68bf78ff59a0891eb1239948e94ce10f73a9dd30 ]
If it fails to allocate 'dot11d_info', rtllib_softmac_init()
should return error code. And remove unneccessary error message.
Fixes: 94a799425eee ("From: wlanfae <[email protected]>")
Reviewed-by: Dan Carpenter <[email protected]>
Reviewed-by: Pavel Skripkin <[email protected]>
Signed-off-by: Yang Yingliang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/staging/rtl8192e/rtllib.h | 2 +-
drivers/staging/rtl8192e/rtllib_softmac.c | 6 ++++--
2 files changed, 5 insertions(+), 3 deletions(-)
diff --git a/drivers/staging/rtl8192e/rtllib.h b/drivers/staging/rtl8192e/rtllib.h
index 4cabaf21c1ca0..367db4acc7852 100644
--- a/drivers/staging/rtl8192e/rtllib.h
+++ b/drivers/staging/rtl8192e/rtllib.h
@@ -1982,7 +1982,7 @@ void rtllib_softmac_xmit(struct rtllib_txb *txb, struct rtllib_device *ieee);
void rtllib_stop_send_beacons(struct rtllib_device *ieee);
void notify_wx_assoc_event(struct rtllib_device *ieee);
void rtllib_start_ibss(struct rtllib_device *ieee);
-void rtllib_softmac_init(struct rtllib_device *ieee);
+int rtllib_softmac_init(struct rtllib_device *ieee);
void rtllib_softmac_free(struct rtllib_device *ieee);
void rtllib_disassociate(struct rtllib_device *ieee);
void rtllib_stop_scan(struct rtllib_device *ieee);
diff --git a/drivers/staging/rtl8192e/rtllib_softmac.c b/drivers/staging/rtl8192e/rtllib_softmac.c
index 2c752ba5a802a..e8e72f79ca007 100644
--- a/drivers/staging/rtl8192e/rtllib_softmac.c
+++ b/drivers/staging/rtl8192e/rtllib_softmac.c
@@ -2953,7 +2953,7 @@ void rtllib_start_protocol(struct rtllib_device *ieee)
}
}
-void rtllib_softmac_init(struct rtllib_device *ieee)
+int rtllib_softmac_init(struct rtllib_device *ieee)
{
int i;
@@ -2964,7 +2964,8 @@ void rtllib_softmac_init(struct rtllib_device *ieee)
ieee->seq_ctrl[i] = 0;
ieee->dot11d_info = kzalloc(sizeof(struct rt_dot11d_info), GFP_ATOMIC);
if (!ieee->dot11d_info)
- netdev_err(ieee->dev, "Can't alloc memory for DOT11D\n");
+ return -ENOMEM;
+
ieee->LinkDetectInfo.SlotIndex = 0;
ieee->LinkDetectInfo.SlotNum = 2;
ieee->LinkDetectInfo.NumRecvBcnInPeriod = 0;
@@ -3030,6 +3031,7 @@ void rtllib_softmac_init(struct rtllib_device *ieee)
tasklet_setup(&ieee->ps_task, rtllib_sta_ps);
+ return 0;
}
void rtllib_softmac_free(struct rtllib_device *ieee)
--
2.34.1
From: Rafael J. Wysocki <[email protected]>
[ Upstream commit 4a9af6cac050dce2e895ec3205c4615383ad9112 ]
The flushing of pending work in the EC driver uses drain_workqueue()
to flush the event handling work that can requeue itself via
advance_transaction(), but this is problematic, because that
work may also be requeued from the query workqueue.
Namely, if an EC transaction is carried out during the execution of
a query handler, it involves calling advance_transaction() which
may queue up the event handling work again. This causes the kernel
to complain about attempts to add a work item to the EC event
workqueue while it is being drained and worst-case it may cause a
valid event to be skipped.
To avoid this problem, introduce two new counters, events_in_progress
and queries_in_progress, incremented when a work item is queued on
the event workqueue or the query workqueue, respectively, and
decremented at the end of the corresponding work function, and make
acpi_ec_dispatch_gpe() the workqueues in a loop until the both of
these counters are zero (or system wakeup is pending) instead of
calling acpi_ec_flush_work().
At the same time, change __acpi_ec_flush_work() to call
flush_workqueue() instead of drain_workqueue() to flush the event
workqueue.
While at it, use the observation that the work item queued in
acpi_ec_query() cannot be pending at that time, because it is used
only once, to simplify the code in there.
Additionally, clean up a comment in acpi_ec_query() and adjust white
space in acpi_ec_event_processor().
Fixes: f0ac20c3f613 ("ACPI: EC: Fix flushing of pending work")
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/acpi/ec.c | 57 +++++++++++++++++++++++++++++++----------
drivers/acpi/internal.h | 2 ++
2 files changed, 45 insertions(+), 14 deletions(-)
diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index be3e0921a6c00..3f2e5ea9ab6b7 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -166,6 +166,7 @@ struct acpi_ec_query {
struct transaction transaction;
struct work_struct work;
struct acpi_ec_query_handler *handler;
+ struct acpi_ec *ec;
};
static int acpi_ec_query(struct acpi_ec *ec, u8 *data);
@@ -469,6 +470,7 @@ static void acpi_ec_submit_query(struct acpi_ec *ec)
ec_dbg_evt("Command(%s) submitted/blocked",
acpi_ec_cmd_string(ACPI_EC_COMMAND_QUERY));
ec->nr_pending_queries++;
+ ec->events_in_progress++;
queue_work(ec_wq, &ec->work);
}
}
@@ -535,7 +537,7 @@ static void acpi_ec_enable_event(struct acpi_ec *ec)
#ifdef CONFIG_PM_SLEEP
static void __acpi_ec_flush_work(void)
{
- drain_workqueue(ec_wq); /* flush ec->work */
+ flush_workqueue(ec_wq); /* flush ec->work */
flush_workqueue(ec_query_wq); /* flush queries */
}
@@ -1116,7 +1118,7 @@ void acpi_ec_remove_query_handler(struct acpi_ec *ec, u8 query_bit)
}
EXPORT_SYMBOL_GPL(acpi_ec_remove_query_handler);
-static struct acpi_ec_query *acpi_ec_create_query(u8 *pval)
+static struct acpi_ec_query *acpi_ec_create_query(struct acpi_ec *ec, u8 *pval)
{
struct acpi_ec_query *q;
struct transaction *t;
@@ -1124,11 +1126,13 @@ static struct acpi_ec_query *acpi_ec_create_query(u8 *pval)
q = kzalloc(sizeof (struct acpi_ec_query), GFP_KERNEL);
if (!q)
return NULL;
+
INIT_WORK(&q->work, acpi_ec_event_processor);
t = &q->transaction;
t->command = ACPI_EC_COMMAND_QUERY;
t->rdata = pval;
t->rlen = 1;
+ q->ec = ec;
return q;
}
@@ -1145,13 +1149,21 @@ static void acpi_ec_event_processor(struct work_struct *work)
{
struct acpi_ec_query *q = container_of(work, struct acpi_ec_query, work);
struct acpi_ec_query_handler *handler = q->handler;
+ struct acpi_ec *ec = q->ec;
ec_dbg_evt("Query(0x%02x) started", handler->query_bit);
+
if (handler->func)
handler->func(handler->data);
else if (handler->handle)
acpi_evaluate_object(handler->handle, NULL, NULL, NULL);
+
ec_dbg_evt("Query(0x%02x) stopped", handler->query_bit);
+
+ spin_lock_irq(&ec->lock);
+ ec->queries_in_progress--;
+ spin_unlock_irq(&ec->lock);
+
acpi_ec_delete_query(q);
}
@@ -1161,7 +1173,7 @@ static int acpi_ec_query(struct acpi_ec *ec, u8 *data)
int result;
struct acpi_ec_query *q;
- q = acpi_ec_create_query(&value);
+ q = acpi_ec_create_query(ec, &value);
if (!q)
return -ENOMEM;
@@ -1183,19 +1195,20 @@ static int acpi_ec_query(struct acpi_ec *ec, u8 *data)
}
/*
- * It is reported that _Qxx are evaluated in a parallel way on
- * Windows:
+ * It is reported that _Qxx are evaluated in a parallel way on Windows:
* https://bugzilla.kernel.org/show_bug.cgi?id=94411
*
- * Put this log entry before schedule_work() in order to make
- * it appearing before any other log entries occurred during the
- * work queue execution.
+ * Put this log entry before queue_work() to make it appear in the log
+ * before any other messages emitted during workqueue handling.
*/
ec_dbg_evt("Query(0x%02x) scheduled", value);
- if (!queue_work(ec_query_wq, &q->work)) {
- ec_dbg_evt("Query(0x%02x) overlapped", value);
- result = -EBUSY;
- }
+
+ spin_lock_irq(&ec->lock);
+
+ ec->queries_in_progress++;
+ queue_work(ec_query_wq, &q->work);
+
+ spin_unlock_irq(&ec->lock);
err_exit:
if (result)
@@ -1253,6 +1266,10 @@ static void acpi_ec_event_handler(struct work_struct *work)
ec_dbg_evt("Event stopped");
acpi_ec_check_event(ec);
+
+ spin_lock_irqsave(&ec->lock, flags);
+ ec->events_in_progress--;
+ spin_unlock_irqrestore(&ec->lock, flags);
}
static void acpi_ec_handle_interrupt(struct acpi_ec *ec)
@@ -2034,6 +2051,7 @@ void acpi_ec_set_gpe_wake_mask(u8 action)
bool acpi_ec_dispatch_gpe(void)
{
+ bool work_in_progress;
u32 ret;
if (!first_ec)
@@ -2054,8 +2072,19 @@ bool acpi_ec_dispatch_gpe(void)
if (ret == ACPI_INTERRUPT_HANDLED)
pm_pr_dbg("ACPI EC GPE dispatched\n");
- /* Flush the event and query workqueues. */
- acpi_ec_flush_work();
+ /* Drain EC work. */
+ do {
+ acpi_ec_flush_work();
+
+ pm_pr_dbg("ACPI EC work flushed\n");
+
+ spin_lock_irq(&first_ec->lock);
+
+ work_in_progress = first_ec->events_in_progress +
+ first_ec->queries_in_progress > 0;
+
+ spin_unlock_irq(&first_ec->lock);
+ } while (work_in_progress && !pm_wakeup_pending());
return false;
}
diff --git a/drivers/acpi/internal.h b/drivers/acpi/internal.h
index a958ad60a3394..125e4901c9b47 100644
--- a/drivers/acpi/internal.h
+++ b/drivers/acpi/internal.h
@@ -184,6 +184,8 @@ struct acpi_ec {
struct work_struct work;
unsigned long timestamp;
unsigned long nr_pending_queries;
+ unsigned int events_in_progress;
+ unsigned int queries_in_progress;
bool busy_polling;
unsigned int polling_guard;
};
--
2.34.1
From: Zhou Qingyang <[email protected]>
[ Upstream commit eccd25136386a04ebf46a64f3a34e8e0fab6d9e1 ]
In ath11k_mac_op_hw_scan(), the return value of kzalloc() is directly
used in memcpy(), which may lead to a NULL pointer dereference on
failure of kzalloc().
Fix this bug by adding a check of arg.extraie.ptr.
This bug was found by a static analyzer. The analysis employs
differential checking to identify inconsistent security operations
(e.g., checks or kfrees) between two code paths and confirms that the
inconsistent operations are not recovered in the current function or
the callers, so they constitute bugs.
Note that, as a bug found by static analysis, it can be a false
positive or hard to trigger. Multiple researchers have cross-reviewed
the bug.
Builds with CONFIG_ATH11K=m show no new warnings, and our static
analyzer no longer warns about this code.
Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Signed-off-by: Zhou Qingyang <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/ath11k/mac.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
index 835ce805b63ec..18e841e1a016d 100644
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -2320,9 +2320,12 @@ static int ath11k_mac_op_hw_scan(struct ieee80211_hw *hw,
arg.scan_id = ATH11K_SCAN_ID;
if (req->ie_len) {
+ arg.extraie.ptr = kmemdup(req->ie, req->ie_len, GFP_KERNEL);
+ if (!arg.extraie.ptr) {
+ ret = -ENOMEM;
+ goto exit;
+ }
arg.extraie.len = req->ie_len;
- arg.extraie.ptr = kzalloc(req->ie_len, GFP_KERNEL);
- memcpy(arg.extraie.ptr, req->ie, req->ie_len);
}
if (req->n_ssids) {
--
2.34.1
From: Frederic Weisbecker <[email protected]>
[ Upstream commit 81f6d49cce2d2fe507e3fddcc4a6db021d9c2e7b ]
Expedited RCU grace periods invoke sync_rcu_exp_select_node_cpus(), which
takes two passes over the leaf rcu_node structure's CPUs. The first
pass gathers up the current CPU and CPUs that are in dynticks idle mode.
The workqueue will report a quiescent state on their behalf later.
The second pass sends IPIs to the rest of the CPUs, but excludes the
current CPU, incorrectly assuming it has been included in the first
pass's list of CPUs.
Unfortunately the current CPU may have changed between the first and
second pass, due to the fact that the various rcu_node structures'
->lock fields have been dropped, thus momentarily enabling preemption.
This means that if the second pass's CPU was not on the first pass's
list, it will be ignored completely. There will be no IPI sent to
it, and there will be no reporting of quiescent states on its behalf.
Unfortunately, the expedited grace period will nevertheless be waiting
for that CPU to report a quiescent state, but with that CPU having no
reason to believe that such a report is needed.
The result will be an expedited grace period stall.
Fix this by no longer excluding the current CPU from consideration during
the second pass.
Fixes: b9ad4d6ed18e ("rcu: Avoid self-IPI in sync_rcu_exp_select_node_cpus()")
Reviewed-by: Neeraj Upadhyay <[email protected]>
Signed-off-by: Frederic Weisbecker <[email protected]>
Cc: Uladzislau Rezki <[email protected]>
Cc: Neeraj Upadhyay <[email protected]>
Cc: Boqun Feng <[email protected]>
Cc: Josh Triplett <[email protected]>
Cc: Joel Fernandes <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/rcu/tree_exp.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/kernel/rcu/tree_exp.h b/kernel/rcu/tree_exp.h
index 0ffe185c1f46a..0dc16345e668c 100644
--- a/kernel/rcu/tree_exp.h
+++ b/kernel/rcu/tree_exp.h
@@ -387,6 +387,7 @@ retry_ipi:
continue;
}
if (get_cpu() == cpu) {
+ mask_ofl_test |= mask;
put_cpu();
continue;
}
--
2.34.1
From: Jackie Liu <[email protected]>
[ Upstream commit 53d22794711ad630f40d59dd726bd260d77d585f ]
Let's select RATIONAL with dp driver. avoid like:
[...]
x86_64-linux-gnu-ld: drivers/gpu/drm/msm/dp/dp_catalog.o: in function `dp_catalog_ctrl_config_msa':
dp_catalog.c:(.text+0x57e): undefined reference to `rational_best_approximation'
Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support")
Reported-by: kernelbot <[email protected]>
Signed-off-by: Jackie Liu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Baryshkov <[email protected]>
Signed-off-by: Rob Clark <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/msm/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/gpu/drm/msm/Kconfig b/drivers/gpu/drm/msm/Kconfig
index dabb4a1ccdcf7..1aad34b5ffd7f 100644
--- a/drivers/gpu/drm/msm/Kconfig
+++ b/drivers/gpu/drm/msm/Kconfig
@@ -60,6 +60,7 @@ config DRM_MSM_HDMI_HDCP
config DRM_MSM_DP
bool "Enable DisplayPort support in MSM DRM driver"
depends on DRM_MSM
+ select RATIONAL
default y
help
Compile in support for DP driver in MSM DRM driver. DP external
--
2.34.1
From: Marijn Suijten <[email protected]>
[ Upstream commit 5ada78b26f935f8751852dffa24f6b545b1d2517 ]
When not specifying num-strings in the DT the default is used, but +1 is
added to it which turns WLED3 into 4 and WLED4/5 into 5 strings instead
of 3 and 4 respectively, causing out-of-bounds reads and register
read/writes. This +1 exists for a deficiency in the DT parsing code,
and is simply omitted entirely - solving this oob issue - by parsing the
property separately much like qcom,enabled-strings.
This also enables more stringent checks on the maximum value when
qcom,enabled-strings is provided in the DT, by parsing num-strings after
enabled-strings to allow it to check against (and in a subsequent patch
override) the length of enabled-strings: it is invalid to set
num-strings higher than that.
The DT currently utilizes it to get around an incorrect fixed read of
four elements from that array (has been addressed in a prior patch) by
setting a lower num-strings where desired.
Fixes: 93c64f1ea1e8 ("leds: add Qualcomm PM8941 WLED driver")
Signed-off-by: Marijn Suijten <[email protected]>
Reviewed-By: AngeloGioacchino Del Regno <[email protected]>
Reviewed-by: Daniel Thompson <[email protected]>
Signed-off-by: Lee Jones <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/video/backlight/qcom-wled.c | 48 ++++++++++-------------------
1 file changed, 16 insertions(+), 32 deletions(-)
diff --git a/drivers/video/backlight/qcom-wled.c b/drivers/video/backlight/qcom-wled.c
index 92df5a9f6ae51..9e09165984b48 100644
--- a/drivers/video/backlight/qcom-wled.c
+++ b/drivers/video/backlight/qcom-wled.c
@@ -1256,21 +1256,6 @@ static const struct wled_var_cfg wled5_ovp_cfg = {
.size = 16,
};
-static u32 wled3_num_strings_values_fn(u32 idx)
-{
- return idx + 1;
-}
-
-static const struct wled_var_cfg wled3_num_strings_cfg = {
- .fn = wled3_num_strings_values_fn,
- .size = 3,
-};
-
-static const struct wled_var_cfg wled4_num_strings_cfg = {
- .fn = wled3_num_strings_values_fn,
- .size = 4,
-};
-
static u32 wled3_switch_freq_values_fn(u32 idx)
{
return 19200 / (2 * (1 + idx));
@@ -1344,11 +1329,6 @@ static int wled_configure(struct wled *wled)
.val_ptr = &cfg->switch_freq,
.cfg = &wled3_switch_freq_cfg,
},
- {
- .name = "qcom,num-strings",
- .val_ptr = &cfg->num_strings,
- .cfg = &wled3_num_strings_cfg,
- },
};
const struct wled_u32_opts wled4_opts[] = {
@@ -1372,11 +1352,6 @@ static int wled_configure(struct wled *wled)
.val_ptr = &cfg->switch_freq,
.cfg = &wled3_switch_freq_cfg,
},
- {
- .name = "qcom,num-strings",
- .val_ptr = &cfg->num_strings,
- .cfg = &wled4_num_strings_cfg,
- },
};
const struct wled_u32_opts wled5_opts[] = {
@@ -1400,11 +1375,6 @@ static int wled_configure(struct wled *wled)
.val_ptr = &cfg->switch_freq,
.cfg = &wled3_switch_freq_cfg,
},
- {
- .name = "qcom,num-strings",
- .val_ptr = &cfg->num_strings,
- .cfg = &wled4_num_strings_cfg,
- },
{
.name = "qcom,modulator-sel",
.val_ptr = &cfg->mod_sel,
@@ -1523,8 +1493,6 @@ static int wled_configure(struct wled *wled)
*bool_opts[i].val_ptr = true;
}
- cfg->num_strings = cfg->num_strings + 1;
-
string_len = of_property_count_elems_of_size(dev->of_node,
"qcom,enabled-strings",
sizeof(u32));
@@ -1555,6 +1523,22 @@ static int wled_configure(struct wled *wled)
}
}
+ rc = of_property_read_u32(dev->of_node, "qcom,num-strings", &val);
+ if (!rc) {
+ if (val < 1 || val > wled->max_string_count) {
+ dev_err(dev, "qcom,num-strings must be between 1 and %d\n",
+ wled->max_string_count);
+ return -EINVAL;
+ }
+
+ if (string_len > 0 && val > string_len) {
+ dev_err(dev, "qcom,num-strings exceeds qcom,enabled-strings\n");
+ return -EINVAL;
+ }
+
+ cfg->num_strings = val;
+ }
+
return 0;
}
--
2.34.1
From: Lv Yunlong <[email protected]>
[ Upstream commit f973795a8d19cbf3d03807704eb7c6ff65788d5a ]
In iwl_txq_dyn_alloc_dma, txq->tfds is freed at first time by:
iwl_txq_alloc()->goto err_free_tfds->dma_free_coherent(). But
it forgot to set txq->tfds to NULL.
Then the txq->tfds is freed again in iwl_txq_dyn_alloc_dma by:
goto error->iwl_txq_gen2_free_memory()->dma_free_coherent().
My patch sets txq->tfds to NULL after the first free to avoid the
double free.
Fixes: 0cd1ad2d7fd41 ("iwlwifi: move all bus-independent TX functions to common code")
Signed-off-by: Lv Yunlong <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Luca Coelho <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/intel/iwlwifi/queue/tx.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/wireless/intel/iwlwifi/queue/tx.c b/drivers/net/wireless/intel/iwlwifi/queue/tx.c
index 9181221a2434d..0136df00ff6a6 100644
--- a/drivers/net/wireless/intel/iwlwifi/queue/tx.c
+++ b/drivers/net/wireless/intel/iwlwifi/queue/tx.c
@@ -1148,6 +1148,7 @@ int iwl_txq_alloc(struct iwl_trans *trans, struct iwl_txq *txq, int slots_num,
return 0;
err_free_tfds:
dma_free_coherent(trans->dev, tfd_sz, txq->tfds, txq->dma_addr);
+ txq->tfds = NULL;
error:
if (txq->entries && cmd_queue)
for (i = 0; i < slots_num; i++)
--
2.34.1
From: Antony Antony <[email protected]>
[ Upstream commit 8dce43919566f06e865f7e8949f5c10d8c2493f5 ]
xfrm interface if_id = 0 would cause xfrm policy lookup errors since
Commit 9f8550e4bd9d.
Now explicitly fail to create an xfrm interface when if_id = 0
With this commit:
ip link add ipsec0 type xfrm dev lo if_id 0
Error: if_id must be non zero.
v1->v2 change:
- add Fixes: tag
Fixes: 9f8550e4bd9d ("xfrm: fix disable_xfrm sysctl when used on xfrm interfaces")
Signed-off-by: Antony Antony <[email protected]>
Reviewed-by: Eyal Birger <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/xfrm/xfrm_interface.c | 14 ++++++++++++--
1 file changed, 12 insertions(+), 2 deletions(-)
diff --git a/net/xfrm/xfrm_interface.c b/net/xfrm/xfrm_interface.c
index e9ce23343f5ca..e1fae61a5bb90 100644
--- a/net/xfrm/xfrm_interface.c
+++ b/net/xfrm/xfrm_interface.c
@@ -643,11 +643,16 @@ static int xfrmi_newlink(struct net *src_net, struct net_device *dev,
struct netlink_ext_ack *extack)
{
struct net *net = dev_net(dev);
- struct xfrm_if_parms p;
+ struct xfrm_if_parms p = {};
struct xfrm_if *xi;
int err;
xfrmi_netlink_parms(data, &p);
+ if (!p.if_id) {
+ NL_SET_ERR_MSG(extack, "if_id must be non zero");
+ return -EINVAL;
+ }
+
xi = xfrmi_locate(net, &p);
if (xi)
return -EEXIST;
@@ -672,7 +677,12 @@ static int xfrmi_changelink(struct net_device *dev, struct nlattr *tb[],
{
struct xfrm_if *xi = netdev_priv(dev);
struct net *net = xi->net;
- struct xfrm_if_parms p;
+ struct xfrm_if_parms p = {};
+
+ if (!p.if_id) {
+ NL_SET_ERR_MSG(extack, "if_id must be non zero");
+ return -EINVAL;
+ }
xfrmi_netlink_parms(data, &p);
xi = xfrmi_locate(net, &p);
--
2.34.1
From: Zhou Qingyang <[email protected]>
[ Upstream commit 0407c49ebe330333478440157c640fffd986f41b ]
In mxb_attach(dev, info), saa7146_vv_init() is called to allocate a
new memory for dev->vv_data. saa7146_vv_release() will be called on
failure of mxb_probe(dev). There is a dereference of dev->vv_data
in saa7146_vv_release(), which could lead to a NULL pointer dereference
on failure of saa7146_vv_init().
Fix this bug by adding a check of saa7146_vv_init().
This bug was found by a static analyzer. The analysis employs
differential checking to identify inconsistent security operations
(e.g., checks or kfrees) between two code paths and confirms that the
inconsistent operations are not recovered in the current function or
the callers, so they constitute bugs.
Note that, as a bug found by static analysis, it can be a false
positive or hard to trigger. Multiple researchers have cross-reviewed
the bug.
Builds with CONFIG_VIDEO_MXB=m show no new warnings,
and our static analyzer no longer warns about this code.
Fixes: 03b1930efd3c ("V4L/DVB: saa7146: fix regression of the av7110/budget-av driver")
Signed-off-by: Zhou Qingyang <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/pci/saa7146/mxb.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/media/pci/saa7146/mxb.c b/drivers/media/pci/saa7146/mxb.c
index 73fc901ecf3db..bf0b9b0914cd5 100644
--- a/drivers/media/pci/saa7146/mxb.c
+++ b/drivers/media/pci/saa7146/mxb.c
@@ -683,10 +683,16 @@ static struct saa7146_ext_vv vv_data;
static int mxb_attach(struct saa7146_dev *dev, struct saa7146_pci_extension_data *info)
{
struct mxb *mxb;
+ int ret;
DEB_EE("dev:%p\n", dev);
- saa7146_vv_init(dev, &vv_data);
+ ret = saa7146_vv_init(dev, &vv_data);
+ if (ret) {
+ ERR("Error in saa7146_vv_init()");
+ return ret;
+ }
+
if (mxb_probe(dev)) {
saa7146_vv_release(dev);
return -1;
--
2.34.1
From: Maor Dickman <[email protected]>
[ Upstream commit 9e72a55a3c9d54b38a704bb7292d984574a81d9d ]
Routes with nexthop objects is currently not supported by multipath offload
and any attempts to use it is blocked, however this also block adding SW
routes with nexthop.
Resolve this by returning NOTIFY_DONE instead of an error which will allow such
a route to be created in SW but not offloaded.
This fix also solve an issue which block adding such routes on different devices
due to missing check if the route FIB device is one of multipath devices.
Fixes: 6a87afc072c3 ("mlx5: Fail attempts to use routes with nexthop objects")
Signed-off-by: Maor Dickman <[email protected]>
Reviewed-by: Roi Dayan <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/mellanox/mlx5/core/lag_mp.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lag_mp.c b/drivers/net/ethernet/mellanox/mlx5/core/lag_mp.c
index 15c3a9058e728..0f0d250bbc150 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/lag_mp.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/lag_mp.c
@@ -265,10 +265,8 @@ static int mlx5_lag_fib_event(struct notifier_block *nb,
fen_info = container_of(info, struct fib_entry_notifier_info,
info);
fi = fen_info->fi;
- if (fi->nh) {
- NL_SET_ERR_MSG_MOD(info->extack, "IPv4 route with nexthop objects is not supported");
- return notifier_from_errno(-EINVAL);
- }
+ if (fi->nh)
+ return NOTIFY_DONE;
fib_dev = fib_info_nh(fen_info->fi, 0)->fib_nh_dev;
if (fib_dev != ldev->pf[MLX5_LAG_P1].netdev &&
fib_dev != ldev->pf[MLX5_LAG_P2].netdev) {
--
2.34.1
From: Aya Levin <[email protected]>
[ Upstream commit 64050cdad0983ad8060e33c3f4b5aee2366bcebd ]
This reverts commit 6d6727dddc7f93fcc155cb8d0c49c29ae0e71122.
Although the NIC doesn't support offload of outer header CSUM, using
gso_partial_features allows offloading the tunnel's segmentation. The
driver relies on the stack CSUM calculation of the outer header. For
this, NETIF_F_GSO_UDP_TUNNEL_CSUM must be a member of the device's
features.
Fixes: 6d6727dddc7f ("net/mlx5e: Block offload of outer header csum for UDP tunnels")
Signed-off-by: Aya Levin <[email protected]>
Reviewed-by: Gal Pressman <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
index 2f6c3a5813ed1..16e98ac47624c 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
@@ -5024,9 +5024,13 @@ static void mlx5e_build_nic_netdev(struct net_device *netdev)
}
if (mlx5_vxlan_allowed(mdev->vxlan) || mlx5_geneve_tx_allowed(mdev)) {
- netdev->hw_features |= NETIF_F_GSO_UDP_TUNNEL;
- netdev->hw_enc_features |= NETIF_F_GSO_UDP_TUNNEL;
- netdev->vlan_features |= NETIF_F_GSO_UDP_TUNNEL;
+ netdev->hw_features |= NETIF_F_GSO_UDP_TUNNEL |
+ NETIF_F_GSO_UDP_TUNNEL_CSUM;
+ netdev->hw_enc_features |= NETIF_F_GSO_UDP_TUNNEL |
+ NETIF_F_GSO_UDP_TUNNEL_CSUM;
+ netdev->gso_partial_features = NETIF_F_GSO_UDP_TUNNEL_CSUM;
+ netdev->vlan_features |= NETIF_F_GSO_UDP_TUNNEL |
+ NETIF_F_GSO_UDP_TUNNEL_CSUM;
}
if (mlx5e_tunnel_proto_supported(mdev, IPPROTO_GRE)) {
--
2.34.1
From: Nathan Chancellor <[email protected]>
[ Upstream commit 4ccdcc8ffd955490feec05380223db6a48961eb5 ]
When building ARCH=arm allmodconfig:
drivers/net/wireless/intel/iwlwifi/mvm/ftm-initiator.c: In function ‘iwl_mvm_ftm_rtt_smoothing’:
./include/asm-generic/div64.h:222:35: error: comparison of distinct pointer types lacks a cast [-Werror]
222 | (void)(((typeof((n)) *)0) == ((uint64_t *)0)); \
| ^~
drivers/net/wireless/intel/iwlwifi/mvm/ftm-initiator.c:1070:9: note: in expansion of macro ‘do_div’
1070 | do_div(rtt_avg, 100);
| ^~~~~~
do_div() has to be used with an unsigned 64-bit integer dividend but
rtt_avg is a signed 64-bit integer.
div_s64() expects a signed 64-bit integer dividend and signed 32-bit
divisor, which fits this scenario, so use that function here to fix the
warning.
Fixes: 8b0f92549f2c ("iwlwifi: mvm: fix 32-bit build in FTM")
Signed-off-by: Nathan Chancellor <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/intel/iwlwifi/mvm/ftm-initiator.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/ftm-initiator.c b/drivers/net/wireless/intel/iwlwifi/mvm/ftm-initiator.c
index fe3d52620a897..b1335fe3b01a2 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/ftm-initiator.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/ftm-initiator.c
@@ -967,8 +967,7 @@ static void iwl_mvm_ftm_rtt_smoothing(struct iwl_mvm *mvm,
overshoot = IWL_MVM_FTM_INITIATOR_SMOOTH_OVERSHOOT;
alpha = IWL_MVM_FTM_INITIATOR_SMOOTH_ALPHA;
- rtt_avg = alpha * rtt + (100 - alpha) * resp->rtt_avg;
- do_div(rtt_avg, 100);
+ rtt_avg = div_s64(alpha * rtt + (100 - alpha) * resp->rtt_avg, 100);
IWL_DEBUG_INFO(mvm,
"%pM: prev rtt_avg=%lld, new rtt_avg=%lld, rtt=%lld\n",
--
2.34.1
From: Aya Levin <[email protected]>
[ Upstream commit 0b7cfa4082fbf550595bc0e40f05614bd83bf0cd ]
Driver initiates DMA sync, hence it may skip CPU sync. Add
DMA_ATTR_SKIP_CPU_SYNC as input attribute both to dma_map_page and
dma_unmap_page to avoid redundant sync with the CPU.
When forcing the device to work with SWIOTLB, the extra sync might cause
data corruption. The driver unmaps the whole page while the hardware
used just a part of the bounce buffer. So syncing overrides the entire
page with bounce buffer that only partially contains real data.
Fixes: bc77b240b3c5 ("net/mlx5e: Add fragmented memory support for RX multi packet WQE")
Fixes: db05815b36cb ("net/mlx5e: Add XSK zero-copy support")
Signed-off-by: Aya Levin <[email protected]>
Reviewed-by: Gal Pressman <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/mellanox/mlx5/core/en/xsk/pool.c | 4 ++--
drivers/net/ethernet/mellanox/mlx5/core/en_rx.c | 7 ++++---
2 files changed, 6 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/xsk/pool.c b/drivers/net/ethernet/mellanox/mlx5/core/en/xsk/pool.c
index 71e8d66fa1509..6692bc8333f73 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en/xsk/pool.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en/xsk/pool.c
@@ -11,13 +11,13 @@ static int mlx5e_xsk_map_pool(struct mlx5e_priv *priv,
{
struct device *dev = mlx5_core_dma_dev(priv->mdev);
- return xsk_pool_dma_map(pool, dev, 0);
+ return xsk_pool_dma_map(pool, dev, DMA_ATTR_SKIP_CPU_SYNC);
}
static void mlx5e_xsk_unmap_pool(struct mlx5e_priv *priv,
struct xsk_buff_pool *pool)
{
- return xsk_pool_dma_unmap(pool, 0);
+ return xsk_pool_dma_unmap(pool, DMA_ATTR_SKIP_CPU_SYNC);
}
static int mlx5e_xsk_get_pools(struct mlx5e_xsk *xsk)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c b/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c
index 117a593414537..d384403d73f69 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c
@@ -276,8 +276,8 @@ static inline int mlx5e_page_alloc_pool(struct mlx5e_rq *rq,
if (unlikely(!dma_info->page))
return -ENOMEM;
- dma_info->addr = dma_map_page(rq->pdev, dma_info->page, 0,
- PAGE_SIZE, rq->buff.map_dir);
+ dma_info->addr = dma_map_page_attrs(rq->pdev, dma_info->page, 0, PAGE_SIZE,
+ rq->buff.map_dir, DMA_ATTR_SKIP_CPU_SYNC);
if (unlikely(dma_mapping_error(rq->pdev, dma_info->addr))) {
page_pool_recycle_direct(rq->page_pool, dma_info->page);
dma_info->page = NULL;
@@ -298,7 +298,8 @@ static inline int mlx5e_page_alloc(struct mlx5e_rq *rq,
void mlx5e_page_dma_unmap(struct mlx5e_rq *rq, struct mlx5e_dma_info *dma_info)
{
- dma_unmap_page(rq->pdev, dma_info->addr, PAGE_SIZE, rq->buff.map_dir);
+ dma_unmap_page_attrs(rq->pdev, dma_info->addr, PAGE_SIZE, rq->buff.map_dir,
+ DMA_ATTR_SKIP_CPU_SYNC);
}
void mlx5e_page_release_dynamic(struct mlx5e_rq *rq,
--
2.34.1
From: Miaoqian Lin <[email protected]>
[ Upstream commit 69c1b87516e327a60b39f96b778fe683259408bf ]
If the probe fails, we should use pm_runtime_disable() to balance
pm_runtime_enable().
Add missing pm_runtime_disable() for meson_spifc_probe.
Fixes: c3e4bc5434d2 ("spi: meson: Add support for Amlogic Meson SPIFC")
Signed-off-by: Miaoqian Lin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/spi/spi-meson-spifc.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/spi/spi-meson-spifc.c b/drivers/spi/spi-meson-spifc.c
index 8eca6f24cb799..c8ed7815c4ba6 100644
--- a/drivers/spi/spi-meson-spifc.c
+++ b/drivers/spi/spi-meson-spifc.c
@@ -349,6 +349,7 @@ static int meson_spifc_probe(struct platform_device *pdev)
return 0;
out_clk:
clk_disable_unprepare(spifc->clk);
+ pm_runtime_disable(spifc->dev);
out_err:
spi_master_put(master);
return ret;
--
2.34.1
From: Igor Pylypiv <[email protected]>
[ Upstream commit 606c54ae975ad3af540b505b46b55a687501711f ]
Starting from commit 05c6c029a44d ("scsi: pm80xx: Increase number of
supported queues") driver initializes only max_q_num queues. Do not use an
invalid queue if the WARN_ON condition is true.
Link: https://lore.kernel.org/r/[email protected]
Fixes: 7640e1eb8c5d ("scsi: pm80xx: Make mpi_build_cmd locking consistent")
Reviewed-by: Vishakha Channapattan <[email protected]>
Acked-by: Jack Wang <[email protected]>
Signed-off-by: Igor Pylypiv <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/pm8001/pm8001_hwi.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index 5d751628a6340..9b318958d78cc 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -1323,7 +1323,9 @@ int pm8001_mpi_build_cmd(struct pm8001_hba_info *pm8001_ha,
int q_index = circularQ - pm8001_ha->inbnd_q_tbl;
int rv = -1;
- WARN_ON(q_index >= PM8001_MAX_INB_NUM);
+ if (WARN_ON(q_index >= pm8001_ha->max_q_num))
+ return -EINVAL;
+
spin_lock_irqsave(&circularQ->iq_lock, flags);
rv = pm8001_mpi_msg_free_get(circularQ, pm8001_ha->iomb_size,
&pMessage);
--
2.34.1
From: José Expósito <[email protected]>
[ Upstream commit f364c571a5c77e96de2d32062ff019d6b8d2e2bc ]
The function performs a check on its input parameters, however, the
hdev parameter is used before the check.
Initialize the stack variables after checking the input parameters to
avoid a possible NULL pointer dereference.
Fixes: 9614219e9310e ("HID: uclogic: Extract tablet parameter discovery into a module")
Addresses-Coverity-ID: 1443831 ("Null pointer dereference")
Signed-off-by: José Expósito <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hid/hid-uclogic-params.c | 13 +++++++++----
1 file changed, 9 insertions(+), 4 deletions(-)
diff --git a/drivers/hid/hid-uclogic-params.c b/drivers/hid/hid-uclogic-params.c
index dd05bed4ca53a..851ab8e24f9d7 100644
--- a/drivers/hid/hid-uclogic-params.c
+++ b/drivers/hid/hid-uclogic-params.c
@@ -832,10 +832,10 @@ int uclogic_params_init(struct uclogic_params *params,
struct hid_device *hdev)
{
int rc;
- struct usb_device *udev = hid_to_usb_dev(hdev);
- __u8 bNumInterfaces = udev->config->desc.bNumInterfaces;
- struct usb_interface *iface = to_usb_interface(hdev->dev.parent);
- __u8 bInterfaceNumber = iface->cur_altsetting->desc.bInterfaceNumber;
+ struct usb_device *udev;
+ __u8 bNumInterfaces;
+ struct usb_interface *iface;
+ __u8 bInterfaceNumber;
bool found;
/* The resulting parameters (noop) */
struct uclogic_params p = {0, };
@@ -846,6 +846,11 @@ int uclogic_params_init(struct uclogic_params *params,
goto cleanup;
}
+ udev = hid_to_usb_dev(hdev);
+ bNumInterfaces = udev->config->desc.bNumInterfaces;
+ iface = to_usb_interface(hdev->dev.parent);
+ bInterfaceNumber = iface->cur_altsetting->desc.bInterfaceNumber;
+
/*
* Set replacement report descriptor if the original matches the
* specified size. Otherwise keep interface unchanged.
--
2.34.1
From: Takashi Iwai <[email protected]>
[ Upstream commit 1e583aef12aa74afd37c1418255cc4b74e023236 ]
The vendor ID of Presonus Studio 1810c had a superfluous '0' in its
USB ID. Drop it.
Fixes: 8dc5efe3d17c ("ALSA: usb-audio: Add support for Presonus Studio 1810c")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/usb/format.c | 2 +-
sound/usb/mixer_quirks.c | 2 +-
sound/usb/quirks.c | 2 +-
3 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/sound/usb/format.c b/sound/usb/format.c
index 4693384db0695..e8a63ea2189d1 100644
--- a/sound/usb/format.c
+++ b/sound/usb/format.c
@@ -365,7 +365,7 @@ static int parse_uac2_sample_rate_range(struct snd_usb_audio *chip,
for (rate = min; rate <= max; rate += res) {
/* Filter out invalid rates on Presonus Studio 1810c */
- if (chip->usb_id == USB_ID(0x0194f, 0x010c) &&
+ if (chip->usb_id == USB_ID(0x194f, 0x010c) &&
!s1810c_valid_sample_rate(fp, rate))
goto skip_rate;
diff --git a/sound/usb/mixer_quirks.c b/sound/usb/mixer_quirks.c
index 8297117f4766e..86fdd669f3fd7 100644
--- a/sound/usb/mixer_quirks.c
+++ b/sound/usb/mixer_quirks.c
@@ -3033,7 +3033,7 @@ int snd_usb_mixer_apply_create_quirk(struct usb_mixer_interface *mixer)
err = snd_rme_controls_create(mixer);
break;
- case USB_ID(0x0194f, 0x010c): /* Presonus Studio 1810c */
+ case USB_ID(0x194f, 0x010c): /* Presonus Studio 1810c */
err = snd_sc1810_init_mixer(mixer);
break;
case USB_ID(0x2a39, 0x3fb0): /* RME Babyface Pro FS */
diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c
index 75d4d317b34b6..6333a2ecb848a 100644
--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -1310,7 +1310,7 @@ int snd_usb_apply_interface_quirk(struct snd_usb_audio *chip,
if (chip->usb_id == USB_ID(0x0763, 0x2012))
return fasttrackpro_skip_setting_quirk(chip, iface, altno);
/* presonus studio 1810c: skip altsets incompatible with device_setup */
- if (chip->usb_id == USB_ID(0x0194f, 0x010c))
+ if (chip->usb_id == USB_ID(0x194f, 0x010c))
return s1810c_skip_setting_quirk(chip, iface, altno);
--
2.34.1
From: Waiman Long <[email protected]>
[ Upstream commit c86ff8c55b8ae68837b2fa59dc0c203907e9a15f ]
Since commit db3a34e17433 ("clocksource: Retry clock read if long delays
detected") and commit 2e27e793e280 ("clocksource: Reduce clocksource-skew
threshold"), it is found that tsc clocksource fallback to hpet can
sometimes happen on both Intel and AMD systems especially when they are
running stressful benchmarking workloads. Of the 23 systems tested with
a v5.14 kernel, 10 of them have switched to hpet clock source during
the test run.
The result of falling back to hpet is a drastic reduction of performance
when running benchmarks. For example, the fio performance tests can
drop up to 70% whereas the iperf3 performance can drop up to 80%.
4 hpet fallbacks happened during bootup. They were:
[ 8.749399] clocksource: timekeeping watchdog on CPU13: hpet read-back delay of 263750ns, attempt 4, marking unstable
[ 12.044610] clocksource: timekeeping watchdog on CPU19: hpet read-back delay of 186166ns, attempt 4, marking unstable
[ 17.336941] clocksource: timekeeping watchdog on CPU28: hpet read-back delay of 182291ns, attempt 4, marking unstable
[ 17.518565] clocksource: timekeeping watchdog on CPU34: hpet read-back delay of 252196ns, attempt 4, marking unstable
Other fallbacks happen when the systems were running stressful
benchmarks. For example:
[ 2685.867873] clocksource: timekeeping watchdog on CPU117: hpet read-back delay of 57269ns, attempt 4, marking unstable
[46215.471228] clocksource: timekeeping watchdog on CPU8: hpet read-back delay of 61460ns, attempt 4, marking unstable
Commit 2e27e793e280 ("clocksource: Reduce clocksource-skew threshold"),
changed the skew margin from 100us to 50us. I think this is too small
and can easily be exceeded when running some stressful workloads on a
thermally stressed system. So it is switched back to 100us.
Even a maximum skew margin of 100us may be too small in for some systems
when booting up especially if those systems are under thermal stress. To
eliminate the case that the large skew is due to the system being too
busy slowing down the reading of both the watchdog and the clocksource,
an extra consecutive read of watchdog clock is being done to check this.
The consecutive watchdog read delay is compared against
WATCHDOG_MAX_SKEW/2. If the delay exceeds the limit, we assume that
the system is just too busy. A warning will be printed to the console
and the clock skew check is skipped for this round.
Fixes: db3a34e17433 ("clocksource: Retry clock read if long delays detected")
Fixes: 2e27e793e280 ("clocksource: Reduce clocksource-skew threshold")
Signed-off-by: Waiman Long <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/time/clocksource.c | 50 ++++++++++++++++++++++++++++++++-------
1 file changed, 41 insertions(+), 9 deletions(-)
diff --git a/kernel/time/clocksource.c b/kernel/time/clocksource.c
index d0803a69a2009..e34ceb91f4c5a 100644
--- a/kernel/time/clocksource.c
+++ b/kernel/time/clocksource.c
@@ -105,7 +105,7 @@ static u64 suspend_start;
* This delay could be due to SMIs, NMIs, or to VCPU preemptions. Used as
* a lower bound for cs->uncertainty_margin values when registering clocks.
*/
-#define WATCHDOG_MAX_SKEW (50 * NSEC_PER_USEC)
+#define WATCHDOG_MAX_SKEW (100 * NSEC_PER_USEC)
#ifdef CONFIG_CLOCKSOURCE_WATCHDOG
static void clocksource_watchdog_work(struct work_struct *work);
@@ -200,17 +200,24 @@ void clocksource_mark_unstable(struct clocksource *cs)
static ulong max_cswd_read_retries = 3;
module_param(max_cswd_read_retries, ulong, 0644);
-static bool cs_watchdog_read(struct clocksource *cs, u64 *csnow, u64 *wdnow)
+enum wd_read_status {
+ WD_READ_SUCCESS,
+ WD_READ_UNSTABLE,
+ WD_READ_SKIP
+};
+
+static enum wd_read_status cs_watchdog_read(struct clocksource *cs, u64 *csnow, u64 *wdnow)
{
unsigned int nretries;
- u64 wd_end, wd_delta;
- int64_t wd_delay;
+ u64 wd_end, wd_end2, wd_delta;
+ int64_t wd_delay, wd_seq_delay;
for (nretries = 0; nretries <= max_cswd_read_retries; nretries++) {
local_irq_disable();
*wdnow = watchdog->read(watchdog);
*csnow = cs->read(cs);
wd_end = watchdog->read(watchdog);
+ wd_end2 = watchdog->read(watchdog);
local_irq_enable();
wd_delta = clocksource_delta(wd_end, *wdnow, watchdog->mask);
@@ -221,13 +228,34 @@ static bool cs_watchdog_read(struct clocksource *cs, u64 *csnow, u64 *wdnow)
pr_warn("timekeeping watchdog on CPU%d: %s retried %d times before success\n",
smp_processor_id(), watchdog->name, nretries);
}
- return true;
+ return WD_READ_SUCCESS;
}
+
+ /*
+ * Now compute delay in consecutive watchdog read to see if
+ * there is too much external interferences that cause
+ * significant delay in reading both clocksource and watchdog.
+ *
+ * If consecutive WD read-back delay > WATCHDOG_MAX_SKEW/2,
+ * report system busy, reinit the watchdog and skip the current
+ * watchdog test.
+ */
+ wd_delta = clocksource_delta(wd_end2, wd_end, watchdog->mask);
+ wd_seq_delay = clocksource_cyc2ns(wd_delta, watchdog->mult, watchdog->shift);
+ if (wd_seq_delay > WATCHDOG_MAX_SKEW/2)
+ goto skip_test;
}
pr_warn("timekeeping watchdog on CPU%d: %s read-back delay of %lldns, attempt %d, marking unstable\n",
smp_processor_id(), watchdog->name, wd_delay, nretries);
- return false;
+ return WD_READ_UNSTABLE;
+
+skip_test:
+ pr_info("timekeeping watchdog on CPU%d: %s wd-wd read-back delay of %lldns\n",
+ smp_processor_id(), watchdog->name, wd_seq_delay);
+ pr_info("wd-%s-wd read-back delay of %lldns, clock-skew test skipped!\n",
+ cs->name, wd_delay);
+ return WD_READ_SKIP;
}
static u64 csnow_mid;
@@ -290,6 +318,7 @@ static void clocksource_watchdog(struct timer_list *unused)
int next_cpu, reset_pending;
int64_t wd_nsec, cs_nsec;
struct clocksource *cs;
+ enum wd_read_status read_ret;
u32 md;
spin_lock(&watchdog_lock);
@@ -307,9 +336,12 @@ static void clocksource_watchdog(struct timer_list *unused)
continue;
}
- if (!cs_watchdog_read(cs, &csnow, &wdnow)) {
- /* Clock readout unreliable, so give it up. */
- __clocksource_unstable(cs);
+ read_ret = cs_watchdog_read(cs, &csnow, &wdnow);
+
+ if (read_ret != WD_READ_SUCCESS) {
+ if (read_ret == WD_READ_UNSTABLE)
+ /* Clock readout unreliable, so give it up. */
+ __clocksource_unstable(cs);
continue;
}
--
2.34.1
From: Bart Van Assche <[email protected]>
[ Upstream commit 21ad0e49085deb22c094f91f9da57319a97188e4 ]
The driver data pointer must be set before any callbacks are registered
that use that pointer. Hence move the initialization of that pointer from
after the ufshcd_init() call to inside ufshcd_init().
Link: https://lore.kernel.org/r/[email protected]
Fixes: 3b1d05807a9a ("[SCSI] ufs: Segregate PCI Specific Code")
Reported-by: Alexey Dobriyan <[email protected]>
Tested-by: Bean Huo <[email protected]>
Reviewed-by: Bean Huo <[email protected]>
Signed-off-by: Bart Van Assche <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/ufs/tc-dwc-g210-pci.c | 1 -
drivers/scsi/ufs/ufshcd-pci.c | 2 --
drivers/scsi/ufs/ufshcd-pltfrm.c | 2 --
drivers/scsi/ufs/ufshcd.c | 7 +++++++
4 files changed, 7 insertions(+), 5 deletions(-)
diff --git a/drivers/scsi/ufs/tc-dwc-g210-pci.c b/drivers/scsi/ufs/tc-dwc-g210-pci.c
index 67a6a61154b71..4e471484539d2 100644
--- a/drivers/scsi/ufs/tc-dwc-g210-pci.c
+++ b/drivers/scsi/ufs/tc-dwc-g210-pci.c
@@ -135,7 +135,6 @@ tc_dwc_g210_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
return err;
}
- pci_set_drvdata(pdev, hba);
pm_runtime_put_noidle(&pdev->dev);
pm_runtime_allow(&pdev->dev);
diff --git a/drivers/scsi/ufs/ufshcd-pci.c b/drivers/scsi/ufs/ufshcd-pci.c
index fadd566025b86..4bf8ec88676ee 100644
--- a/drivers/scsi/ufs/ufshcd-pci.c
+++ b/drivers/scsi/ufs/ufshcd-pci.c
@@ -347,8 +347,6 @@ ufshcd_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
return err;
}
- pci_set_drvdata(pdev, hba);
-
hba->vops = (struct ufs_hba_variant_ops *)id->driver_data;
err = ufshcd_init(hba, mmio_base, pdev->irq);
diff --git a/drivers/scsi/ufs/ufshcd-pltfrm.c b/drivers/scsi/ufs/ufshcd-pltfrm.c
index 8c92d1bde64be..e49505534d498 100644
--- a/drivers/scsi/ufs/ufshcd-pltfrm.c
+++ b/drivers/scsi/ufs/ufshcd-pltfrm.c
@@ -412,8 +412,6 @@ int ufshcd_pltfrm_init(struct platform_device *pdev,
goto dealloc_host;
}
- platform_set_drvdata(pdev, hba);
-
pm_runtime_set_active(&pdev->dev);
pm_runtime_enable(&pdev->dev);
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index e3a9a02cadf5a..bf302776340ce 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -9085,6 +9085,13 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq)
struct device *dev = hba->dev;
char eh_wq_name[sizeof("ufs_eh_wq_00")];
+ /*
+ * dev_set_drvdata() must be called before any callbacks are registered
+ * that use dev_get_drvdata() (frequency scaling, clock scaling, hwmon,
+ * sysfs).
+ */
+ dev_set_drvdata(dev, hba);
+
if (!mmio_base) {
dev_err(hba->dev,
"Invalid memory reference for mmio_base is NULL\n");
--
2.34.1
From: Kamal Heib <[email protected]>
[ Upstream commit 2a67fcfa0db6b4075515bd23497750849b88850f ]
Before query pkey, make sure that the queried index is valid.
Fixes: 9a4435375cd1 ("IB/hns: Add driver files for hns RoCE driver")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Kamal Heib <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/hw/hns/hns_roce_main.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/infiniband/hw/hns/hns_roce_main.c b/drivers/infiniband/hw/hns/hns_roce_main.c
index ba65823a5c0bb..c0249e4874a96 100644
--- a/drivers/infiniband/hw/hns/hns_roce_main.c
+++ b/drivers/infiniband/hw/hns/hns_roce_main.c
@@ -279,6 +279,9 @@ static enum rdma_link_layer hns_roce_get_link_layer(struct ib_device *device,
static int hns_roce_query_pkey(struct ib_device *ib_dev, u8 port, u16 index,
u16 *pkey)
{
+ if (index > 0)
+ return -EINVAL;
+
*pkey = PKEY_ID;
return 0;
--
2.34.1
From: José Expósito <[email protected]>
[ Upstream commit ff6b548afe4d9d1ff3a0f6ef79e8cbca25d8f905 ]
The function performs a check on its input parameters, however, the
hdev parameter is used before the check.
Initialize the stack variables after checking the input parameters to
avoid a possible NULL pointer dereference.
Fixes: 9614219e9310e ("HID: uclogic: Extract tablet parameter discovery into a module")
Addresses-Coverity-ID: 1443804 ("Null pointer dereference")
Signed-off-by: José Expósito <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hid/hid-uclogic-params.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/drivers/hid/hid-uclogic-params.c b/drivers/hid/hid-uclogic-params.c
index a751c9a49360f..df12178a80da5 100644
--- a/drivers/hid/hid-uclogic-params.c
+++ b/drivers/hid/hid-uclogic-params.c
@@ -707,9 +707,9 @@ static int uclogic_params_huion_init(struct uclogic_params *params,
struct hid_device *hdev)
{
int rc;
- struct usb_device *udev = hid_to_usb_dev(hdev);
- struct usb_interface *iface = to_usb_interface(hdev->dev.parent);
- __u8 bInterfaceNumber = iface->cur_altsetting->desc.bInterfaceNumber;
+ struct usb_device *udev;
+ struct usb_interface *iface;
+ __u8 bInterfaceNumber;
bool found;
/* The resulting parameters (noop) */
struct uclogic_params p = {0, };
@@ -723,6 +723,10 @@ static int uclogic_params_huion_init(struct uclogic_params *params,
goto cleanup;
}
+ udev = hid_to_usb_dev(hdev);
+ iface = to_usb_interface(hdev->dev.parent);
+ bInterfaceNumber = iface->cur_altsetting->desc.bInterfaceNumber;
+
/* If it's not a pen interface */
if (bInterfaceNumber != 0) {
/* TODO: Consider marking the interface invalid */
--
2.34.1
From: Alan Stern <[email protected]>
[ Upstream commit 6e1fcab00a23f7fe9f4fe9704905a790efa1eeab ]
John Garry reported a deadlock that occurs when trying to access a
runtime-suspended SATA device. For obscure reasons, the rescan procedure
causes the link to be hard-reset, which disconnects the device.
The rescan tries to carry out a runtime resume when accessing the device.
scsi_rescan_device() holds the SCSI device lock and won't release it until
it can put commands onto the device's block queue. This can't happen until
the queue is successfully runtime-resumed or the device is unregistered.
But the runtime resume fails because the device is disconnected, and
__scsi_remove_device() can't do the unregistration because it can't get the
device lock.
The best way to resolve this deadlock appears to be to allow the block
queue to start running again even after an unsuccessful runtime resume.
The idea is that the driver or the SCSI error handler will need to be able
to use the queue to resolve the runtime resume failure.
This patch removes the err argument to blk_post_runtime_resume() and makes
the routine act as though the resume was successful always. This fixes the
deadlock.
Link: https://lore.kernel.org/r/[email protected]
Fixes: e27829dc92e5 ("scsi: serialize ->rescan against ->remove")
Reported-and-tested-by: John Garry <[email protected]>
Reviewed-by: Bart Van Assche <[email protected]>
Signed-off-by: Alan Stern <[email protected]>
Signed-off-by: Xiang Chen <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
block/blk-pm.c | 22 +++++++---------------
drivers/scsi/scsi_pm.c | 2 +-
include/linux/blk-pm.h | 2 +-
3 files changed, 9 insertions(+), 17 deletions(-)
diff --git a/block/blk-pm.c b/block/blk-pm.c
index 17bd020268d42..2dad62cc15727 100644
--- a/block/blk-pm.c
+++ b/block/blk-pm.c
@@ -163,27 +163,19 @@ EXPORT_SYMBOL(blk_pre_runtime_resume);
/**
* blk_post_runtime_resume - Post runtime resume processing
* @q: the queue of the device
- * @err: return value of the device's runtime_resume function
*
* Description:
- * Update the queue's runtime status according to the return value of the
- * device's runtime_resume function. If the resume was successful, call
- * blk_set_runtime_active() to do the real work of restarting the queue.
+ * For historical reasons, this routine merely calls blk_set_runtime_active()
+ * to do the real work of restarting the queue. It does this regardless of
+ * whether the device's runtime-resume succeeded; even if it failed the
+ * driver or error handler will need to communicate with the device.
*
* This function should be called near the end of the device's
* runtime_resume callback.
*/
-void blk_post_runtime_resume(struct request_queue *q, int err)
+void blk_post_runtime_resume(struct request_queue *q)
{
- if (!q->dev)
- return;
- if (!err) {
- blk_set_runtime_active(q);
- } else {
- spin_lock_irq(&q->queue_lock);
- q->rpm_status = RPM_SUSPENDED;
- spin_unlock_irq(&q->queue_lock);
- }
+ blk_set_runtime_active(q);
}
EXPORT_SYMBOL(blk_post_runtime_resume);
@@ -201,7 +193,7 @@ EXPORT_SYMBOL(blk_post_runtime_resume);
* runtime PM status and re-enable peeking requests from the queue. It
* should be called before first request is added to the queue.
*
- * This function is also called by blk_post_runtime_resume() for successful
+ * This function is also called by blk_post_runtime_resume() for
* runtime resumes. It does everything necessary to restart the queue.
*/
void blk_set_runtime_active(struct request_queue *q)
diff --git a/drivers/scsi/scsi_pm.c b/drivers/scsi/scsi_pm.c
index 3717eea37ecb3..e91a0a5bc7a3e 100644
--- a/drivers/scsi/scsi_pm.c
+++ b/drivers/scsi/scsi_pm.c
@@ -262,7 +262,7 @@ static int sdev_runtime_resume(struct device *dev)
blk_pre_runtime_resume(sdev->request_queue);
if (pm && pm->runtime_resume)
err = pm->runtime_resume(dev);
- blk_post_runtime_resume(sdev->request_queue, err);
+ blk_post_runtime_resume(sdev->request_queue);
return err;
}
diff --git a/include/linux/blk-pm.h b/include/linux/blk-pm.h
index b80c65aba2493..2580e05a8ab67 100644
--- a/include/linux/blk-pm.h
+++ b/include/linux/blk-pm.h
@@ -14,7 +14,7 @@ extern void blk_pm_runtime_init(struct request_queue *q, struct device *dev);
extern int blk_pre_runtime_suspend(struct request_queue *q);
extern void blk_post_runtime_suspend(struct request_queue *q, int err);
extern void blk_pre_runtime_resume(struct request_queue *q);
-extern void blk_post_runtime_resume(struct request_queue *q, int err);
+extern void blk_post_runtime_resume(struct request_queue *q);
extern void blk_set_runtime_active(struct request_queue *q);
#else
static inline void blk_pm_runtime_init(struct request_queue *q,
--
2.34.1
From: Christophe Leroy <[email protected]>
[ Upstream commit fb5608fd117a8b48752d2b5a7e70847c1ed33d33 ]
regs->softe doesn't exist on PPC32.
Add irq_soft_mask_regs_set_state() helper to set regs->softe.
This helper will void on PPC32.
Signed-off-by: Christophe Leroy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/5f37d1177a751fdbca79df461d283850ca3a34a2.1612796617.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/include/asm/hw_irq.h | 11 +++++++++--
1 file changed, 9 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/include/asm/hw_irq.h b/arch/powerpc/include/asm/hw_irq.h
index 0363734ff56e0..da94cab528dd4 100644
--- a/arch/powerpc/include/asm/hw_irq.h
+++ b/arch/powerpc/include/asm/hw_irq.h
@@ -38,6 +38,8 @@
#define PACA_IRQ_MUST_HARD_MASK (PACA_IRQ_EE)
#endif
+#endif /* CONFIG_PPC64 */
+
/*
* flags for paca->irq_soft_mask
*/
@@ -46,8 +48,6 @@
#define IRQS_PMI_DISABLED 2
#define IRQS_ALL_DISABLED (IRQS_DISABLED | IRQS_PMI_DISABLED)
-#endif /* CONFIG_PPC64 */
-
#ifndef __ASSEMBLY__
extern void replay_system_reset(void);
@@ -296,6 +296,10 @@ extern void irq_set_pending_from_srr1(unsigned long srr1);
extern void force_external_irq_replay(void);
+static inline void irq_soft_mask_regs_set_state(struct pt_regs *regs, unsigned long val)
+{
+ regs->softe = val;
+}
#else /* CONFIG_PPC64 */
static inline unsigned long arch_local_save_flags(void)
@@ -364,6 +368,9 @@ static inline bool arch_irq_disabled_regs(struct pt_regs *regs)
static inline void may_hard_irq_enable(void) { }
+static inline void irq_soft_mask_regs_set_state(struct pt_regs *regs, unsigned long val)
+{
+}
#endif /* CONFIG_PPC64 */
#define ARCH_IRQ_INIT_FLAGS IRQ_NOREQUEST
--
2.34.1
From: Stafford Horne <[email protected]>
[ Upstream commit 433fe39f674d58bc7a3e8254a5d2ffc290b7e04e ]
Like fork and clone the clone3 syscall needs a wrapper to save callee
saved registers, which is required by the OpenRISC ABI. This came up
after auditing code following a discussion with Rob Landley and Arnd
Bergmann [0].
Tested with the clone3 kselftests and there were no issues.
[0] https://lore.kernel.org/all/[email protected]/T/#m9c0cdb2703813b9df4da04cf6b30de1f1aa89944
Fixes: 07e83dfbe16c ("openrisc: Enable the clone3 syscall")
Cc: Rob Landley <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Signed-off-by: Stafford Horne <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/openrisc/include/asm/syscalls.h | 2 ++
arch/openrisc/kernel/entry.S | 5 +++++
2 files changed, 7 insertions(+)
diff --git a/arch/openrisc/include/asm/syscalls.h b/arch/openrisc/include/asm/syscalls.h
index 3a7eeae6f56a8..aa1c7e98722e3 100644
--- a/arch/openrisc/include/asm/syscalls.h
+++ b/arch/openrisc/include/asm/syscalls.h
@@ -22,9 +22,11 @@ asmlinkage long sys_or1k_atomic(unsigned long type, unsigned long *v1,
asmlinkage long __sys_clone(unsigned long clone_flags, unsigned long newsp,
void __user *parent_tid, void __user *child_tid, int tls);
+asmlinkage long __sys_clone3(struct clone_args __user *uargs, size_t size);
asmlinkage long __sys_fork(void);
#define sys_clone __sys_clone
+#define sys_clone3 __sys_clone3
#define sys_fork __sys_fork
#endif /* __ASM_OPENRISC_SYSCALLS_H */
diff --git a/arch/openrisc/kernel/entry.S b/arch/openrisc/kernel/entry.S
index 98e4f97db5159..b42d32d79b2e6 100644
--- a/arch/openrisc/kernel/entry.S
+++ b/arch/openrisc/kernel/entry.S
@@ -1170,6 +1170,11 @@ ENTRY(__sys_clone)
l.j _fork_save_extra_regs_and_call
l.nop
+ENTRY(__sys_clone3)
+ l.movhi r29,hi(sys_clone3)
+ l.j _fork_save_extra_regs_and_call
+ l.ori r29,r29,lo(sys_clone3)
+
ENTRY(__sys_fork)
l.movhi r29,hi(sys_fork)
l.ori r29,r29,lo(sys_fork)
--
2.34.1
From: Peiwei Hu <[email protected]>
[ Upstream commit 869fb7e5aecbc163003f93f36dcc26d0554319f6 ]
prom_getprop() can return PROM_ERROR. Binary operator can not identify
it.
Fixes: 94d2dde738a5 ("[POWERPC] Efika: prune fixups and make them more carefull")
Signed-off-by: Peiwei Hu <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/kernel/prom_init.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index 7e337c570ea6b..9e71c0739f08d 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -2956,7 +2956,7 @@ static void __init fixup_device_tree_efika_add_phy(void)
/* Check if the phy-handle property exists - bail if it does */
rv = prom_getprop(node, "phy-handle", prop, sizeof(prop));
- if (!rv)
+ if (rv <= 0)
return;
/*
--
2.34.1
From: Maxim Levitsky <[email protected]>
[ Upstream commit a8d4a37d1bb93608501d0d0545f902061152669a ]
This will give IOMMU GA log a chance to work after resume
from s3/s4.
Fixes: 8bda0cfbdc1a6 ("iommu/amd: Detect and initialize guest vAPIC log")
Signed-off-by: Maxim Levitsky <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joerg Roedel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/iommu/amd/init.c | 31 +++++++++++++++----------------
1 file changed, 15 insertions(+), 16 deletions(-)
diff --git a/drivers/iommu/amd/init.c b/drivers/iommu/amd/init.c
index c82f8ab4783c0..3f31a52f7044f 100644
--- a/drivers/iommu/amd/init.c
+++ b/drivers/iommu/amd/init.c
@@ -805,16 +805,27 @@ static int iommu_ga_log_enable(struct amd_iommu *iommu)
{
#ifdef CONFIG_IRQ_REMAP
u32 status, i;
+ u64 entry;
if (!iommu->ga_log)
return -EINVAL;
- status = readl(iommu->mmio_base + MMIO_STATUS_OFFSET);
-
/* Check if already running */
- if (status & (MMIO_STATUS_GALOG_RUN_MASK))
+ status = readl(iommu->mmio_base + MMIO_STATUS_OFFSET);
+ if (WARN_ON(status & (MMIO_STATUS_GALOG_RUN_MASK)))
return 0;
+ entry = iommu_virt_to_phys(iommu->ga_log) | GA_LOG_SIZE_512;
+ memcpy_toio(iommu->mmio_base + MMIO_GA_LOG_BASE_OFFSET,
+ &entry, sizeof(entry));
+ entry = (iommu_virt_to_phys(iommu->ga_log_tail) &
+ (BIT_ULL(52)-1)) & ~7ULL;
+ memcpy_toio(iommu->mmio_base + MMIO_GA_LOG_TAIL_OFFSET,
+ &entry, sizeof(entry));
+ writel(0x00, iommu->mmio_base + MMIO_GA_HEAD_OFFSET);
+ writel(0x00, iommu->mmio_base + MMIO_GA_TAIL_OFFSET);
+
+
iommu_feature_enable(iommu, CONTROL_GAINT_EN);
iommu_feature_enable(iommu, CONTROL_GALOG_EN);
@@ -824,7 +835,7 @@ static int iommu_ga_log_enable(struct amd_iommu *iommu)
break;
}
- if (i >= LOOP_TIMEOUT)
+ if (WARN_ON(i >= LOOP_TIMEOUT))
return -EINVAL;
#endif /* CONFIG_IRQ_REMAP */
return 0;
@@ -833,8 +844,6 @@ static int iommu_ga_log_enable(struct amd_iommu *iommu)
static int iommu_init_ga_log(struct amd_iommu *iommu)
{
#ifdef CONFIG_IRQ_REMAP
- u64 entry;
-
if (!AMD_IOMMU_GUEST_IR_VAPIC(amd_iommu_guest_ir))
return 0;
@@ -848,16 +857,6 @@ static int iommu_init_ga_log(struct amd_iommu *iommu)
if (!iommu->ga_log_tail)
goto err_out;
- entry = iommu_virt_to_phys(iommu->ga_log) | GA_LOG_SIZE_512;
- memcpy_toio(iommu->mmio_base + MMIO_GA_LOG_BASE_OFFSET,
- &entry, sizeof(entry));
- entry = (iommu_virt_to_phys(iommu->ga_log_tail) &
- (BIT_ULL(52)-1)) & ~7ULL;
- memcpy_toio(iommu->mmio_base + MMIO_GA_LOG_TAIL_OFFSET,
- &entry, sizeof(entry));
- writel(0x00, iommu->mmio_base + MMIO_GA_HEAD_OFFSET);
- writel(0x00, iommu->mmio_base + MMIO_GA_TAIL_OFFSET);
-
return 0;
err_out:
free_ga_log(iommu);
--
2.34.1
From: Andrii Nakryiko <[email protected]>
[ Upstream commit 8c7a95520184b6677ca6075e12df9c208d57d088 ]
skb_ctx selftest didn't close bpf_object implicitly allocated by
bpf_prog_test_load() helper. Fix the problem by explicitly calling
bpf_object__close() at the end of the test.
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Reviewed-by: Hengqi Chen <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/bpf/prog_tests/skb_ctx.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/tools/testing/selftests/bpf/prog_tests/skb_ctx.c b/tools/testing/selftests/bpf/prog_tests/skb_ctx.c
index fafeddaad6a99..23915be6172d6 100644
--- a/tools/testing/selftests/bpf/prog_tests/skb_ctx.c
+++ b/tools/testing/selftests/bpf/prog_tests/skb_ctx.c
@@ -105,4 +105,6 @@ void test_skb_ctx(void)
"ctx_out_mark",
"skb->mark == %u, expected %d\n",
skb.mark, 10);
+
+ bpf_object__close(obj);
}
--
2.34.1
From: Paul Gerber <[email protected]>
[ Upstream commit 3de89d8842a2b5d3dd22ebf97dd561ae0a330948 ]
The i.MX 8MP has a ADC_PD bit in the TMU_TER register that controls the
operating mode of the ADC:
* 0 means normal operating mode
* 1 means power down mode
When enabling/disabling the TMU, the ADC operating mode must be set
accordingly.
i.MX 8M Mini & Nano are lacking this bit.
Signed-off-by: Paul Gerber <[email protected]>
Signed-off-by: Alexander Stein <[email protected]>
Fixes: 2b8f1f0337c5 ("thermal: imx8mm: Add i.MX8MP support")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Daniel Lezcano <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/thermal/imx8mm_thermal.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/thermal/imx8mm_thermal.c b/drivers/thermal/imx8mm_thermal.c
index a1e4f9bb4cb01..0f4cabd2a8c62 100644
--- a/drivers/thermal/imx8mm_thermal.c
+++ b/drivers/thermal/imx8mm_thermal.c
@@ -21,6 +21,7 @@
#define TPS 0x4
#define TRITSR 0x20 /* TMU immediate temp */
+#define TER_ADC_PD BIT(30)
#define TER_EN BIT(31)
#define TRITSR_TEMP0_VAL_MASK 0xff
#define TRITSR_TEMP1_VAL_MASK 0xff0000
@@ -113,6 +114,8 @@ static void imx8mm_tmu_enable(struct imx8mm_tmu *tmu, bool enable)
val = readl_relaxed(tmu->base + TER);
val = enable ? (val | TER_EN) : (val & ~TER_EN);
+ if (tmu->socdata->version == TMU_VER2)
+ val = enable ? (val & ~TER_ADC_PD) : (val | TER_ADC_PD);
writel_relaxed(val, tmu->base + TER);
}
--
2.34.1
From: Hector Martin <[email protected]>
[ Upstream commit 9abe2ac834851a7d0b0756e295cf7a292c45ca53 ]
Table descriptors were being installed without properly formatting the
address using paddr_to_iopte, which does not match up with the
iopte_deref in __arm_lpae_map. This is incorrect for the LPAE pte
format, as it does not handle the high bits properly.
This was found on Apple T6000 DARTs, which require a new pte format
(different shift); adding support for that to
paddr_to_iopte/iopte_to_paddr caused it to break badly, as even <48-bit
addresses would end up incorrect in that case.
Fixes: 6c89928ff7a0 ("iommu/io-pgtable-arm: Support 52-bit physical address")
Acked-by: Robin Murphy <[email protected]>
Signed-off-by: Hector Martin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joerg Roedel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/iommu/io-pgtable-arm.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/iommu/io-pgtable-arm.c b/drivers/iommu/io-pgtable-arm.c
index bcfbd0e44a4a0..e1cd31c0e3c19 100644
--- a/drivers/iommu/io-pgtable-arm.c
+++ b/drivers/iommu/io-pgtable-arm.c
@@ -302,11 +302,12 @@ static int arm_lpae_init_pte(struct arm_lpae_io_pgtable *data,
static arm_lpae_iopte arm_lpae_install_table(arm_lpae_iopte *table,
arm_lpae_iopte *ptep,
arm_lpae_iopte curr,
- struct io_pgtable_cfg *cfg)
+ struct arm_lpae_io_pgtable *data)
{
arm_lpae_iopte old, new;
+ struct io_pgtable_cfg *cfg = &data->iop.cfg;
- new = __pa(table) | ARM_LPAE_PTE_TYPE_TABLE;
+ new = paddr_to_iopte(__pa(table), data) | ARM_LPAE_PTE_TYPE_TABLE;
if (cfg->quirks & IO_PGTABLE_QUIRK_ARM_NS)
new |= ARM_LPAE_PTE_NSTABLE;
@@ -357,7 +358,7 @@ static int __arm_lpae_map(struct arm_lpae_io_pgtable *data, unsigned long iova,
if (!cptep)
return -ENOMEM;
- pte = arm_lpae_install_table(cptep, ptep, 0, cfg);
+ pte = arm_lpae_install_table(cptep, ptep, 0, data);
if (pte)
__arm_lpae_free_pages(cptep, tblsz, cfg);
} else if (!cfg->coherent_walk && !(pte & ARM_LPAE_PTE_SW_SYNC)) {
@@ -546,7 +547,7 @@ static size_t arm_lpae_split_blk_unmap(struct arm_lpae_io_pgtable *data,
__arm_lpae_init_pte(data, blk_paddr, pte, lvl, &tablep[i]);
}
- pte = arm_lpae_install_table(tablep, ptep, blk_pte, cfg);
+ pte = arm_lpae_install_table(tablep, ptep, blk_pte, data);
if (pte != blk_pte) {
__arm_lpae_free_pages(tablep, tablesz, cfg);
/*
--
2.34.1
From: Jiasheng Jiang <[email protected]>
[ Upstream commit 2167c0b205960607fb136b4bb3c556a62be1569a ]
The return value of device_property_read_u32_array() is not always 0.
To catch the exception in case that devm_kzalloc failed and the
rt5663->imp_table was NULL, which caused the failure of
device_property_read_u32_array.
Fixes: 450f0f6a8fb4 ("ASoC: rt5663: Add the manual offset field to compensate the DC offset")
Signed-off-by: Jiasheng Jiang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/codecs/rt5663.c | 12 +++++++++---
1 file changed, 9 insertions(+), 3 deletions(-)
diff --git a/sound/soc/codecs/rt5663.c b/sound/soc/codecs/rt5663.c
index 619fb9a031e39..db8a41aaa3859 100644
--- a/sound/soc/codecs/rt5663.c
+++ b/sound/soc/codecs/rt5663.c
@@ -3461,6 +3461,7 @@ static void rt5663_calibrate(struct rt5663_priv *rt5663)
static int rt5663_parse_dp(struct rt5663_priv *rt5663, struct device *dev)
{
int table_size;
+ int ret;
device_property_read_u32(dev, "realtek,dc_offset_l_manual",
&rt5663->pdata.dc_offset_l_manual);
@@ -3477,9 +3478,11 @@ static int rt5663_parse_dp(struct rt5663_priv *rt5663, struct device *dev)
table_size = sizeof(struct impedance_mapping_table) *
rt5663->pdata.impedance_sensing_num;
rt5663->imp_table = devm_kzalloc(dev, table_size, GFP_KERNEL);
- device_property_read_u32_array(dev,
+ ret = device_property_read_u32_array(dev,
"realtek,impedance_sensing_table",
(u32 *)rt5663->imp_table, table_size);
+ if (ret)
+ return ret;
}
return 0;
@@ -3504,8 +3507,11 @@ static int rt5663_i2c_probe(struct i2c_client *i2c,
if (pdata)
rt5663->pdata = *pdata;
- else
- rt5663_parse_dp(rt5663, &i2c->dev);
+ else {
+ ret = rt5663_parse_dp(rt5663, &i2c->dev);
+ if (ret)
+ return ret;
+ }
for (i = 0; i < ARRAY_SIZE(rt5663->supplies); i++)
rt5663->supplies[i].supply = rt5663_supply_names[i];
--
2.34.1
From: Jiasheng Jiang <[email protected]>
[ Upstream commit c6564c13dae25cd7f8e1de5127b4da4500ee5844 ]
For the possible failure of the platform_get_irq(), the returned irq
could be error number and will finally cause the failure of the
request_irq().
Consider that platform_get_irq() can now in certain cases return
-EPROBE_DEFER, and the consequences of letting request_irq()
effectively convert that into -EINVAL, even at probe time rather than
later on. So it might be better to check just now.
Fixes: b1201e44f50b ("can: xilinx CAN controller support")
Link: https://lore.kernel.org/all/[email protected]
Signed-off-by: Jiasheng Jiang <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/can/xilinx_can.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/net/can/xilinx_can.c b/drivers/net/can/xilinx_can.c
index 48d746e18f302..375998263af7a 100644
--- a/drivers/net/can/xilinx_can.c
+++ b/drivers/net/can/xilinx_can.c
@@ -1762,7 +1762,12 @@ static int xcan_probe(struct platform_device *pdev)
spin_lock_init(&priv->tx_lock);
/* Get IRQ for the device */
- ndev->irq = platform_get_irq(pdev, 0);
+ ret = platform_get_irq(pdev, 0);
+ if (ret < 0)
+ goto err_free;
+
+ ndev->irq = ret;
+
ndev->flags |= IFF_ECHO; /* We support local echo */
platform_set_drvdata(pdev, ndev);
--
2.34.1
From: Christophe Leroy <[email protected]>
[ Upstream commit b149d5d45ac9171ed699a256f026c8ebef901112 ]
Commit df1f679d19ed ("powerpc/powermac: Add missing
lockdep_register_key()") fixed a problem that was causing a WARNING.
There are two other places in the same file with the same problem
originating from commit 9e607f72748d ("i2c_powermac: shut up lockdep
warning").
Add missing lockdep_register_key()
Fixes: 9e607f72748d ("i2c_powermac: shut up lockdep warning")
Reported-by: Erhard Furtner <[email protected]>
Signed-off-by: Christophe Leroy <[email protected]>
Depends-on: df1f679d19ed ("powerpc/powermac: Add missing lockdep_register_key()")
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=200055
Link: https://lore.kernel.org/r/2c7e421874e21b2fb87813d768cf662f630c2ad4.1638984999.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/platforms/powermac/low_i2c.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/powerpc/platforms/powermac/low_i2c.c b/arch/powerpc/platforms/powermac/low_i2c.c
index f77a59b5c2e1a..09bfe4b8f25aa 100644
--- a/arch/powerpc/platforms/powermac/low_i2c.c
+++ b/arch/powerpc/platforms/powermac/low_i2c.c
@@ -810,6 +810,7 @@ static void __init pmu_i2c_probe(void)
bus->hostdata = bus + 1;
bus->xfer = pmu_i2c_xfer;
mutex_init(&bus->mutex);
+ lockdep_register_key(&bus->lock_key);
lockdep_set_class(&bus->mutex, &bus->lock_key);
bus->flags = pmac_i2c_multibus;
list_add(&bus->link, &pmac_i2c_busses);
@@ -933,6 +934,7 @@ static void __init smu_i2c_probe(void)
bus->hostdata = bus + 1;
bus->xfer = smu_i2c_xfer;
mutex_init(&bus->mutex);
+ lockdep_register_key(&bus->lock_key);
lockdep_set_class(&bus->mutex, &bus->lock_key);
bus->flags = 0;
list_add(&bus->link, &pmac_i2c_busses);
--
2.34.1
From: Jim Quinlan <[email protected]>
[ Upstream commit a8d61a9112ad0c9216ab45d050991e07bc4f3408 ]
The struct device variable "dev_bogus" was triggering this warning
on a PowerPC build:
drivers/of/unittest.c: In function 'of_unittest_dma_ranges_one.constprop':
[...] >> The frame size of 1424 bytes is larger than 1024 bytes
[-Wframe-larger-than=]
This variable is now dynamically allocated.
Fixes: e0d072782c734 ("dma-mapping: introduce DMA range map, supplanting dma_pfn_offset")
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Jim Quinlan <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Reviewed-by: Frank Rowand <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Signed-off-by: Rob Herring <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/of/unittest.c | 16 ++++++++++++----
1 file changed, 12 insertions(+), 4 deletions(-)
diff --git a/drivers/of/unittest.c b/drivers/of/unittest.c
index 1d4b0b7d0cc10..a5c4c77b6f3e2 100644
--- a/drivers/of/unittest.c
+++ b/drivers/of/unittest.c
@@ -910,11 +910,18 @@ static void __init of_unittest_dma_ranges_one(const char *path,
if (!rc) {
phys_addr_t paddr;
dma_addr_t dma_addr;
- struct device dev_bogus;
+ struct device *dev_bogus;
- dev_bogus.dma_range_map = map;
- paddr = dma_to_phys(&dev_bogus, expect_dma_addr);
- dma_addr = phys_to_dma(&dev_bogus, expect_paddr);
+ dev_bogus = kzalloc(sizeof(struct device), GFP_KERNEL);
+ if (!dev_bogus) {
+ unittest(0, "kzalloc() failed\n");
+ kfree(map);
+ return;
+ }
+
+ dev_bogus->dma_range_map = map;
+ paddr = dma_to_phys(dev_bogus, expect_dma_addr);
+ dma_addr = phys_to_dma(dev_bogus, expect_paddr);
unittest(paddr == expect_paddr,
"of_dma_get_range: wrong phys addr %pap (expecting %llx) on node %pOF\n",
@@ -924,6 +931,7 @@ static void __init of_unittest_dma_ranges_one(const char *path,
&dma_addr, expect_dma_addr, np);
kfree(map);
+ kfree(dev_bogus);
}
of_node_put(np);
#endif
--
2.34.1
From: Wan Jiabing <[email protected]>
[ Upstream commit 85744f2d938c5f3cfc44cb6533c157469634da93 ]
Fix following coccicheck warning:
./arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c:156:1-33: Function
for_each_matching_node_and_match should have of_node_put() before break
and goto.
Early exits from for_each_matching_node_and_match() should decrement the
node reference counter.
Signed-off-by: Wan Jiabing <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c b/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c
index ee949255ced3f..09ef73b99dd86 100644
--- a/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c
+++ b/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c
@@ -154,8 +154,10 @@ static int __init rcar_gen2_regulator_quirk(void)
return -ENODEV;
for_each_matching_node_and_match(np, rcar_gen2_quirk_match, &id) {
- if (!of_device_is_available(np))
+ if (!of_device_is_available(np)) {
+ of_node_put(np);
break;
+ }
ret = of_property_read_u32(np, "reg", &addr);
if (ret) /* Skip invalid entry and continue */
@@ -164,6 +166,7 @@ static int __init rcar_gen2_regulator_quirk(void)
quirk = kzalloc(sizeof(*quirk), GFP_KERNEL);
if (!quirk) {
ret = -ENOMEM;
+ of_node_put(np);
goto err_mem;
}
--
2.34.1
From: Avihai Horon <[email protected]>
[ Upstream commit 483d805191a23191f8294bbf9b4e94836f5d92e4 ]
Currently, ib_find_gid() will stop searching after encountering the first
empty GID table entry. This behavior is wrong since neither IB nor RoCE
spec enforce tightly packed GID tables.
For example, when a valid GID entry exists at index N, and if a GID entry
is empty at index N-1, ib_find_gid() will fail to find the valid entry.
Fix it by making ib_find_gid() continue searching even after encountering
missing entries.
Fixes: 5eb620c81ce3 ("IB/core: Add helpers for uncached GID and P_Key searches")
Link: https://lore.kernel.org/r/e55d331b96cecfc2cf19803d16e7109ea966882d.1639055490.git.leonro@nvidia.com
Signed-off-by: Avihai Horon <[email protected]>
Reviewed-by: Mark Zhang <[email protected]>
Signed-off-by: Leon Romanovsky <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/core/device.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/infiniband/core/device.c b/drivers/infiniband/core/device.c
index 76b9c436edcd2..aa526c5ca0cf3 100644
--- a/drivers/infiniband/core/device.c
+++ b/drivers/infiniband/core/device.c
@@ -2411,7 +2411,8 @@ int ib_find_gid(struct ib_device *device, union ib_gid *gid,
++i) {
ret = rdma_query_gid(device, port, i, &tmp_gid);
if (ret)
- return ret;
+ continue;
+
if (!memcmp(&tmp_gid, gid, sizeof *gid)) {
*port_num = port;
if (index)
--
2.34.1
From: Arnd Bergmann <[email protected]>
[ Upstream commit 134c37fa250a87a7e77c80a7c59ae16c462e46e0 ]
The last driver referencing the slave_id on Marvell PXA and MMP platforms
was the SPI driver, but this stopped doing so a long time ago, so the
TODO from the earlier patch can no be removed.
Fixes: b729bf34535e ("spi/pxa2xx: Don't use slave_id of dma_slave_config")
Fixes: 13b3006b8ebd ("dma: mmp_pdma: add filter function")
Signed-off-by: Arnd Bergmann <[email protected]>
Acked-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/dma/mmp_pdma.c | 6 ------
drivers/dma/pxa_dma.c | 7 -------
2 files changed, 13 deletions(-)
diff --git a/drivers/dma/mmp_pdma.c b/drivers/dma/mmp_pdma.c
index b84303be8edf5..4eb63f1ad2247 100644
--- a/drivers/dma/mmp_pdma.c
+++ b/drivers/dma/mmp_pdma.c
@@ -728,12 +728,6 @@ static int mmp_pdma_config_write(struct dma_chan *dchan,
chan->dir = direction;
chan->dev_addr = addr;
- /* FIXME: drivers should be ported over to use the filter
- * function. Once that's done, the following two lines can
- * be removed.
- */
- if (cfg->slave_id)
- chan->drcmr = cfg->slave_id;
return 0;
}
diff --git a/drivers/dma/pxa_dma.c b/drivers/dma/pxa_dma.c
index 349fb312c8725..b4ef4f19f7dec 100644
--- a/drivers/dma/pxa_dma.c
+++ b/drivers/dma/pxa_dma.c
@@ -911,13 +911,6 @@ static void pxad_get_config(struct pxad_chan *chan,
*dcmd |= PXA_DCMD_BURST16;
else if (maxburst == 32)
*dcmd |= PXA_DCMD_BURST32;
-
- /* FIXME: drivers should be ported over to use the filter
- * function. Once that's done, the following two lines can
- * be removed.
- */
- if (chan->cfg.slave_id)
- chan->drcmr = chan->cfg.slave_id;
}
static struct dma_async_tx_descriptor *
--
2.34.1
From: Jiasheng Jiang <[email protected]>
[ Upstream commit 2e81948177d769106754085c3e03534e6cc1f623 ]
As the possible alloc failure of devm_kcalloc(), it could return null
pointer.
Therefore, 'strings' should be checked and return NULL if alloc fails to
prevent the dereference of the NULL pointer.
Also, the caller should also deal with the return value of the
gb_generate_enum_strings() and return -ENOMEM if returns NULL.
Moreover, because the memory allocated with devm_kzalloc() will be
freed automatically when the last reference to the device is dropped,
the 'gbe' in gbaudio_tplg_create_enum_kctl() and
gbaudio_tplg_create_enum_ctl() do not need to free manually.
But the 'control' in gbaudio_tplg_create_widget() and
gbaudio_tplg_process_kcontrols() has a specially error handle to
cleanup.
So it should be better to cleanup 'control' when fails.
Fixes: e65579e335da ("greybus: audio: topology: Enable enumerated control support")
Reviewed-by: Alex Elder <[email protected]>
Signed-off-by: Jiasheng Jiang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/staging/greybus/audio_topology.c | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/drivers/staging/greybus/audio_topology.c b/drivers/staging/greybus/audio_topology.c
index 2bb8e7b60e8d5..e1579f356af5c 100644
--- a/drivers/staging/greybus/audio_topology.c
+++ b/drivers/staging/greybus/audio_topology.c
@@ -147,6 +147,9 @@ static const char **gb_generate_enum_strings(struct gbaudio_module_info *gb,
items = le32_to_cpu(gbenum->items);
strings = devm_kcalloc(gb->dev, items, sizeof(char *), GFP_KERNEL);
+ if (!strings)
+ return NULL;
+
data = gbenum->names;
for (i = 0; i < items; i++) {
@@ -655,6 +658,8 @@ static int gbaudio_tplg_create_enum_kctl(struct gbaudio_module_info *gb,
/* since count=1, and reg is dummy */
gbe->items = le32_to_cpu(gb_enum->items);
gbe->texts = gb_generate_enum_strings(gb, gb_enum);
+ if (!gbe->texts)
+ return -ENOMEM;
/* debug enum info */
dev_dbg(gb->dev, "Max:%d, name_length:%d\n", gbe->items,
@@ -862,6 +867,8 @@ static int gbaudio_tplg_create_enum_ctl(struct gbaudio_module_info *gb,
/* since count=1, and reg is dummy */
gbe->items = le32_to_cpu(gb_enum->items);
gbe->texts = gb_generate_enum_strings(gb, gb_enum);
+ if (!gbe->texts)
+ return -ENOMEM;
/* debug enum info */
dev_dbg(gb->dev, "Max:%d, name_length:%d\n", gbe->items,
@@ -1072,6 +1079,10 @@ static int gbaudio_tplg_create_widget(struct gbaudio_module_info *module,
csize += le16_to_cpu(gbenum->names_length);
control->texts = (const char * const *)
gb_generate_enum_strings(module, gbenum);
+ if (!control->texts) {
+ ret = -ENOMEM;
+ goto error;
+ }
control->items = le32_to_cpu(gbenum->items);
} else {
csize = sizeof(struct gb_audio_control);
@@ -1181,6 +1192,10 @@ static int gbaudio_tplg_process_kcontrols(struct gbaudio_module_info *module,
csize += le16_to_cpu(gbenum->names_length);
control->texts = (const char * const *)
gb_generate_enum_strings(module, gbenum);
+ if (!control->texts) {
+ ret = -ENOMEM;
+ goto error;
+ }
control->items = le32_to_cpu(gbenum->items);
} else {
csize = sizeof(struct gb_audio_control);
--
2.34.1
From: Michal Suchanek <[email protected]>
[ Upstream commit 358fcf5ddbec4e6706405847d6a666f5933a6c25 ]
When the kernel is locked down the kernel allows reading only debugfs
files with mode 444. Mode 400 is also valid but is not allowed.
Make the 444 into a mask.
Fixes: 5496197f9b08 ("debugfs: Restrict debugfs when the kernel is locked down")
Signed-off-by: Michal Suchanek <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/debugfs/file.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/debugfs/file.c b/fs/debugfs/file.c
index 3aa5eb9ce498e..96059af28f508 100644
--- a/fs/debugfs/file.c
+++ b/fs/debugfs/file.c
@@ -147,7 +147,7 @@ static int debugfs_locked_down(struct inode *inode,
struct file *filp,
const struct file_operations *real_fops)
{
- if ((inode->i_mode & 07777) == 0444 &&
+ if ((inode->i_mode & 07777 & ~0444) == 0 &&
!(filp->f_mode & FMODE_WRITE) &&
!real_fops->unlocked_ioctl &&
!real_fops->compat_ioctl &&
--
2.34.1
From: Xiongfeng Wang <[email protected]>
[ Upstream commit d7061627d701c90e1cac1e1e60c45292f64f3470 ]
It turns out to be possible for hotplugging out a device to reach the
stage of tearing down the device's group and default domain before the
domain's flush queue has drained naturally. At this point, it is then
possible for the timeout to expire just before the del_timer() call
in free_iova_flush_queue(), such that we then proceed to free the FQ
resources while fq_flush_timeout() is still accessing them on another
CPU. Crashes due to this have been observed in the wild while removing
NVMe devices.
Close the race window by using del_timer_sync() to safely wait for any
active timeout handler to finish before we start to free things. We
already avoid any locking in free_iova_flush_queue() since the FQ is
supposed to be inactive anyway, so the potential deadlock scenario does
not apply.
Fixes: 9a005a800ae8 ("iommu/iova: Add flush timer")
Reviewed-by: John Garry <[email protected]>
Signed-off-by: Xiongfeng Wang <[email protected]>
[ rm: rewrite commit message ]
Signed-off-by: Robin Murphy <[email protected]>
Link: https://lore.kernel.org/r/0a365e5b07f14b7344677ad6a9a734966a8422ce.1639753638.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/iommu/iova.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/iommu/iova.c b/drivers/iommu/iova.c
index 30d969a4c5fde..1164d1a42cbc5 100644
--- a/drivers/iommu/iova.c
+++ b/drivers/iommu/iova.c
@@ -64,8 +64,7 @@ static void free_iova_flush_queue(struct iova_domain *iovad)
if (!has_iova_flush_queue(iovad))
return;
- if (timer_pending(&iovad->fq_timer))
- del_timer(&iovad->fq_timer);
+ del_timer_sync(&iovad->fq_timer);
fq_destroy_all_entries(iovad);
--
2.34.1
From: Hans de Goede <[email protected]>
[ Upstream commit 1a68b346a2c9969c05e80a3b99a9ab160b5655c0 ]
Currently, acpi_bus_get_status() calls acpi_device_always_present() to
allow platform quirks to override the _STA return to report that a
device is present (status = ACPI_STA_DEFAULT) independent of the _STA
return.
In some cases it might also be useful to have the opposite functionality
and have a platform quirk which marks a device as not present (status = 0)
to work around ACPI table bugs.
Change acpi_device_always_present() into a more generic
acpi_device_override_status() function to allow this.
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/acpi/bus.c | 4 +--
drivers/acpi/x86/utils.c | 64 +++++++++++++++++++++++-----------------
include/acpi/acpi_bus.h | 5 ++--
3 files changed, 42 insertions(+), 31 deletions(-)
diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c
index e317214aabec5..5e14288fcabe9 100644
--- a/drivers/acpi/bus.c
+++ b/drivers/acpi/bus.c
@@ -98,8 +98,8 @@ int acpi_bus_get_status(struct acpi_device *device)
acpi_status status;
unsigned long long sta;
- if (acpi_device_always_present(device)) {
- acpi_set_device_status(device, ACPI_STA_DEFAULT);
+ if (acpi_device_override_status(device, &sta)) {
+ acpi_set_device_status(device, sta);
return 0;
}
diff --git a/drivers/acpi/x86/utils.c b/drivers/acpi/x86/utils.c
index baaa44edc9441..c6b0782dcced5 100644
--- a/drivers/acpi/x86/utils.c
+++ b/drivers/acpi/x86/utils.c
@@ -22,54 +22,63 @@
* Some BIOS-es (temporarily) hide specific APCI devices to work around Windows
* driver bugs. We use DMI matching to match known cases of this.
*
- * We work around this by always reporting ACPI_STA_DEFAULT for these
- * devices. Note this MUST only be done for devices where this is safe.
+ * Likewise sometimes some not-actually present devices are sometimes
+ * reported as present, which may cause issues.
*
- * This forcing of devices to be present is limited to specific CPU (SoC)
- * models both to avoid potentially causing trouble on other models and
- * because some HIDs are re-used on different SoCs for completely
- * different devices.
+ * We work around this by using the below quirk list to override the status
+ * reported by the _STA method with a fixed value (ACPI_STA_DEFAULT or 0).
+ * Note this MUST only be done for devices where this is safe.
+ *
+ * This status overriding is limited to specific CPU (SoC) models both to
+ * avoid potentially causing trouble on other models and because some HIDs
+ * are re-used on different SoCs for completely different devices.
*/
-struct always_present_id {
+struct override_status_id {
struct acpi_device_id hid[2];
struct x86_cpu_id cpu_ids[2];
struct dmi_system_id dmi_ids[2]; /* Optional */
const char *uid;
+ unsigned long long status;
};
-#define X86_MATCH(model) X86_MATCH_INTEL_FAM6_MODEL(model, NULL)
-
-#define ENTRY(hid, uid, cpu_models, dmi...) { \
+#define ENTRY(status, hid, uid, cpu_model, dmi...) { \
{ { hid, }, {} }, \
- { cpu_models, {} }, \
+ { X86_MATCH_INTEL_FAM6_MODEL(cpu_model, NULL), {} }, \
{ { .matches = dmi }, {} }, \
uid, \
+ status, \
}
-static const struct always_present_id always_present_ids[] = {
+#define PRESENT_ENTRY_HID(hid, uid, cpu_model, dmi...) \
+ ENTRY(ACPI_STA_DEFAULT, hid, uid, cpu_model, dmi)
+
+#define NOT_PRESENT_ENTRY_HID(hid, uid, cpu_model, dmi...) \
+ ENTRY(0, hid, uid, cpu_model, dmi)
+
+static const struct override_status_id override_status_ids[] = {
/*
* Bay / Cherry Trail PWM directly poked by GPU driver in win10,
* but Linux uses a separate PWM driver, harmless if not used.
*/
- ENTRY("80860F09", "1", X86_MATCH(ATOM_SILVERMONT), {}),
- ENTRY("80862288", "1", X86_MATCH(ATOM_AIRMONT), {}),
+ PRESENT_ENTRY_HID("80860F09", "1", ATOM_SILVERMONT, {}),
+ PRESENT_ENTRY_HID("80862288", "1", ATOM_AIRMONT, {}),
/*
* The INT0002 device is necessary to clear wakeup interrupt sources
* on Cherry Trail devices, without it we get nobody cared IRQ msgs.
*/
- ENTRY("INT0002", "1", X86_MATCH(ATOM_AIRMONT), {}),
+ PRESENT_ENTRY_HID("INT0002", "1", ATOM_AIRMONT, {}),
/*
* On the Dell Venue 11 Pro 7130 and 7139, the DSDT hides
* the touchscreen ACPI device until a certain time
* after _SB.PCI0.GFX0.LCD.LCD1._ON gets called has passed
* *and* _STA has been called at least 3 times since.
*/
- ENTRY("SYNA7500", "1", X86_MATCH(HASWELL_L), {
+ PRESENT_ENTRY_HID("SYNA7500", "1", HASWELL_L, {
DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
DMI_MATCH(DMI_PRODUCT_NAME, "Venue 11 Pro 7130"),
}),
- ENTRY("SYNA7500", "1", X86_MATCH(HASWELL_L), {
+ PRESENT_ENTRY_HID("SYNA7500", "1", HASWELL_L, {
DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
DMI_MATCH(DMI_PRODUCT_NAME, "Venue 11 Pro 7139"),
}),
@@ -85,19 +94,19 @@ static const struct always_present_id always_present_ids[] = {
* was copy-pasted from the GPD win, so it has a disabled KIOX000A
* node which we should not enable, thus we also check the BIOS date.
*/
- ENTRY("KIOX000A", "1", X86_MATCH(ATOM_AIRMONT), {
+ PRESENT_ENTRY_HID("KIOX000A", "1", ATOM_AIRMONT, {
DMI_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"),
DMI_MATCH(DMI_BOARD_NAME, "Default string"),
DMI_MATCH(DMI_PRODUCT_NAME, "Default string"),
DMI_MATCH(DMI_BIOS_DATE, "02/21/2017")
}),
- ENTRY("KIOX000A", "1", X86_MATCH(ATOM_AIRMONT), {
+ PRESENT_ENTRY_HID("KIOX000A", "1", ATOM_AIRMONT, {
DMI_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"),
DMI_MATCH(DMI_BOARD_NAME, "Default string"),
DMI_MATCH(DMI_PRODUCT_NAME, "Default string"),
DMI_MATCH(DMI_BIOS_DATE, "03/20/2017")
}),
- ENTRY("KIOX000A", "1", X86_MATCH(ATOM_AIRMONT), {
+ PRESENT_ENTRY_HID("KIOX000A", "1", ATOM_AIRMONT, {
DMI_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"),
DMI_MATCH(DMI_BOARD_NAME, "Default string"),
DMI_MATCH(DMI_PRODUCT_NAME, "Default string"),
@@ -105,26 +114,27 @@ static const struct always_present_id always_present_ids[] = {
}),
};
-bool acpi_device_always_present(struct acpi_device *adev)
+bool acpi_device_override_status(struct acpi_device *adev, unsigned long long *status)
{
bool ret = false;
unsigned int i;
- for (i = 0; i < ARRAY_SIZE(always_present_ids); i++) {
- if (acpi_match_device_ids(adev, always_present_ids[i].hid))
+ for (i = 0; i < ARRAY_SIZE(override_status_ids); i++) {
+ if (acpi_match_device_ids(adev, override_status_ids[i].hid))
continue;
if (!adev->pnp.unique_id ||
- strcmp(adev->pnp.unique_id, always_present_ids[i].uid))
+ strcmp(adev->pnp.unique_id, override_status_ids[i].uid))
continue;
- if (!x86_match_cpu(always_present_ids[i].cpu_ids))
+ if (!x86_match_cpu(override_status_ids[i].cpu_ids))
continue;
- if (always_present_ids[i].dmi_ids[0].matches[0].slot &&
- !dmi_check_system(always_present_ids[i].dmi_ids))
+ if (override_status_ids[i].dmi_ids[0].matches[0].slot &&
+ !dmi_check_system(override_status_ids[i].dmi_ids))
continue;
+ *status = override_status_ids[i].status;
ret = true;
break;
}
diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h
index 6ad3b89a8a2e0..0f5366792d22e 100644
--- a/include/acpi/acpi_bus.h
+++ b/include/acpi/acpi_bus.h
@@ -605,9 +605,10 @@ int acpi_enable_wakeup_device_power(struct acpi_device *dev, int state);
int acpi_disable_wakeup_device_power(struct acpi_device *dev);
#ifdef CONFIG_X86
-bool acpi_device_always_present(struct acpi_device *adev);
+bool acpi_device_override_status(struct acpi_device *adev, unsigned long long *status);
#else
-static inline bool acpi_device_always_present(struct acpi_device *adev)
+static inline bool acpi_device_override_status(struct acpi_device *adev,
+ unsigned long long *status)
{
return false;
}
--
2.34.1
From: Niklas Söderlund <[email protected]>
[ Upstream commit da6911f330d40cfe115a37249e47643eff555e82 ]
This change fixes two issues with the size constraints for buffers.
- There is no width alignment constraint for RGB formats. Prior to this
change they were treated as YUV and as a result were more restricted
than needed. Add a new check to differentiate between the two.
- The minimum width and height supported is 5x2, not 2x4, this is an
artifact from the driver's soc-camera days. Fix this incorrect
assumption.
Signed-off-by: Niklas Söderlund <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/platform/rcar-vin/rcar-v4l2.c | 15 +++++++++++----
1 file changed, 11 insertions(+), 4 deletions(-)
diff --git a/drivers/media/platform/rcar-vin/rcar-v4l2.c b/drivers/media/platform/rcar-vin/rcar-v4l2.c
index 3e7a3ae2a6b97..0bbe6f9f92062 100644
--- a/drivers/media/platform/rcar-vin/rcar-v4l2.c
+++ b/drivers/media/platform/rcar-vin/rcar-v4l2.c
@@ -175,20 +175,27 @@ static void rvin_format_align(struct rvin_dev *vin, struct v4l2_pix_format *pix)
break;
}
- /* HW limit width to a multiple of 32 (2^5) for NV12/16 else 2 (2^1) */
+ /* Hardware limits width alignment based on format. */
switch (pix->pixelformat) {
+ /* Multiple of 32 (2^5) for NV12/16. */
case V4L2_PIX_FMT_NV12:
case V4L2_PIX_FMT_NV16:
walign = 5;
break;
- default:
+ /* Multiple of 2 (2^1) for YUV. */
+ case V4L2_PIX_FMT_YUYV:
+ case V4L2_PIX_FMT_UYVY:
walign = 1;
break;
+ /* No multiple for RGB. */
+ default:
+ walign = 0;
+ break;
}
/* Limit to VIN capabilities */
- v4l_bound_align_image(&pix->width, 2, vin->info->max_width, walign,
- &pix->height, 4, vin->info->max_height, 2, 0);
+ v4l_bound_align_image(&pix->width, 5, vin->info->max_width, walign,
+ &pix->height, 2, vin->info->max_height, 0, 0);
pix->bytesperline = rvin_format_bytesperline(vin, pix);
pix->sizeimage = rvin_format_sizeimage(pix);
--
2.34.1
From: Kamal Heib <[email protected]>
[ Upstream commit b1a4da64bfc189510e08df1ccb1c589e667dc7a3 ]
Fix the wrongly reported max_send_wr and max_recv_wr attributes for user
QP by making sure to save their valuse on QP creation, so when query QP is
called the attributes will be reported correctly.
Fixes: cecbcddf6461 ("qedr: Add support for QP verbs")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Kamal Heib <[email protected]>
Acked-by: Michal Kalderon <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/hw/qedr/verbs.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/infiniband/hw/qedr/verbs.c b/drivers/infiniband/hw/qedr/verbs.c
index 16d5283651894..eeb87f31cd252 100644
--- a/drivers/infiniband/hw/qedr/verbs.c
+++ b/drivers/infiniband/hw/qedr/verbs.c
@@ -1918,6 +1918,7 @@ static int qedr_create_user_qp(struct qedr_dev *dev,
/* db offset was calculated in copy_qp_uresp, now set in the user q */
if (qedr_qp_has_sq(qp)) {
qp->usq.db_addr = ctx->dpi_addr + uresp.sq_db_offset;
+ qp->sq.max_wr = attrs->cap.max_send_wr;
rc = qedr_db_recovery_add(dev, qp->usq.db_addr,
&qp->usq.db_rec_data->db_data,
DB_REC_WIDTH_32B,
@@ -1928,6 +1929,7 @@ static int qedr_create_user_qp(struct qedr_dev *dev,
if (qedr_qp_has_rq(qp)) {
qp->urq.db_addr = ctx->dpi_addr + uresp.rq_db_offset;
+ qp->rq.max_wr = attrs->cap.max_recv_wr;
rc = qedr_db_recovery_add(dev, qp->urq.db_addr,
&qp->urq.db_rec_data->db_data,
DB_REC_WIDTH_32B,
--
2.34.1
From: Dillon Min <[email protected]>
[ Upstream commit 6fc058a72f3b7b07fc4de6d66ad1f68951b00f6e ]
stm32's clk driver register two ltdc gate clk to clk core by
clk_hw_register_gate() and clk_hw_register_composite()
first: 'stm32f429_gates[]', clk name is 'ltdc', which no user to use.
second: 'stm32f429_aux_clk[]', clk name is 'lcd-tft', used by ltdc driver
both of them point to the same offset of stm32's RCC register. after
kernel enter console, clk core turn off ltdc's clk as 'stm32f429_gates[]'
is no one to use. but, actually 'stm32f429_aux_clk[]' is in use.
stm32f469/746/769 have the same issue, fix it.
Fixes: daf2d117cbca ("clk: stm32f4: Add lcd-tft clock")
Link: https://lore.kernel.org/linux-arm-kernel/[email protected]/
Link: https://lore.kernel.org/lkml/CAPTRvHkf0cK_4ZidM17rPo99gWDmxgqFt4CDUjqFFwkOeQeFDg@mail.gmail.com/
Signed-off-by: Dillon Min <[email protected]>
Reviewed-by: Patrice Chotard <[email protected]>
Acked-by: Gabriel Fernandez <[email protected]>
Acked-by: Stephen Boyd <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/clk-stm32f4.c | 4 ----
1 file changed, 4 deletions(-)
diff --git a/drivers/clk/clk-stm32f4.c b/drivers/clk/clk-stm32f4.c
index 5c75e3d906c20..682a18b392f08 100644
--- a/drivers/clk/clk-stm32f4.c
+++ b/drivers/clk/clk-stm32f4.c
@@ -129,7 +129,6 @@ static const struct stm32f4_gate_data stm32f429_gates[] __initconst = {
{ STM32F4_RCC_APB2ENR, 20, "spi5", "apb2_div" },
{ STM32F4_RCC_APB2ENR, 21, "spi6", "apb2_div" },
{ STM32F4_RCC_APB2ENR, 22, "sai1", "apb2_div" },
- { STM32F4_RCC_APB2ENR, 26, "ltdc", "apb2_div" },
};
static const struct stm32f4_gate_data stm32f469_gates[] __initconst = {
@@ -211,7 +210,6 @@ static const struct stm32f4_gate_data stm32f469_gates[] __initconst = {
{ STM32F4_RCC_APB2ENR, 20, "spi5", "apb2_div" },
{ STM32F4_RCC_APB2ENR, 21, "spi6", "apb2_div" },
{ STM32F4_RCC_APB2ENR, 22, "sai1", "apb2_div" },
- { STM32F4_RCC_APB2ENR, 26, "ltdc", "apb2_div" },
};
static const struct stm32f4_gate_data stm32f746_gates[] __initconst = {
@@ -286,7 +284,6 @@ static const struct stm32f4_gate_data stm32f746_gates[] __initconst = {
{ STM32F4_RCC_APB2ENR, 21, "spi6", "apb2_div" },
{ STM32F4_RCC_APB2ENR, 22, "sai1", "apb2_div" },
{ STM32F4_RCC_APB2ENR, 23, "sai2", "apb2_div" },
- { STM32F4_RCC_APB2ENR, 26, "ltdc", "apb2_div" },
};
static const struct stm32f4_gate_data stm32f769_gates[] __initconst = {
@@ -364,7 +361,6 @@ static const struct stm32f4_gate_data stm32f769_gates[] __initconst = {
{ STM32F4_RCC_APB2ENR, 21, "spi6", "apb2_div" },
{ STM32F4_RCC_APB2ENR, 22, "sai1", "apb2_div" },
{ STM32F4_RCC_APB2ENR, 23, "sai2", "apb2_div" },
- { STM32F4_RCC_APB2ENR, 26, "ltdc", "apb2_div" },
{ STM32F4_RCC_APB2ENR, 30, "mdio", "apb2_div" },
};
--
2.34.1
From: Baruch Siach <[email protected]>
[ Upstream commit 94a4950a4acff39b5847cc1fee4f65e160813493 ]
The cell_count field of of_phandle_iterator is the number of cells we
expect in the phandle arguments list when cells_name is missing. The
error message should show the number of cells we actually see.
Fixes: af3be70a3211 ("of: Improve of_phandle_iterator_next() error message")
Cc: Florian Fainelli <[email protected]>
Signed-off-by: Baruch Siach <[email protected]>
Signed-off-by: Rob Herring <[email protected]>
Link: https://lore.kernel.org/r/96519ac55be90a63fa44afe01480c30d08535465.1640881913.git.baruch@tkos.co.il
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/of/base.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/of/base.c b/drivers/of/base.c
index 161a23631472d..60cb9b44d4ecc 100644
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@@ -1328,9 +1328,9 @@ int of_phandle_iterator_next(struct of_phandle_iterator *it)
* property data length
*/
if (it->cur + count > it->list_end) {
- pr_err("%pOF: %s = %d found %d\n",
+ pr_err("%pOF: %s = %d found %td\n",
it->parent, it->cells_name,
- count, it->cell_count);
+ count, it->list_end - it->cur);
goto err;
}
}
--
2.34.1
From: Zhou Qingyang <[email protected]>
[ Upstream commit 3af86b046933ba513d08399dba0d4d8b50d607d0 ]
In hexium_attach(dev, info), saa7146_vv_init() is called to allocate
a new memory for dev->vv_data. saa7146_vv_release() will be called on
failure of saa7146_register_device(). There is a dereference of
dev->vv_data in saa7146_vv_release(), which could lead to a NULL
pointer dereference on failure of saa7146_vv_init().
Fix this bug by adding a check of saa7146_vv_init().
This bug was found by a static analyzer. The analysis employs
differential checking to identify inconsistent security operations
(e.g., checks or kfrees) between two code paths and confirms that the
inconsistent operations are not recovered in the current function or
the callers, so they constitute bugs.
Note that, as a bug found by static analysis, it can be a false
positive or hard to trigger. Multiple researchers have cross-reviewed
the bug.
Builds with CONFIG_VIDEO_HEXIUM_GEMINI=m show no new warnings,
and our static analyzer no longer warns about this code.
Link: https://lore.kernel.org/linux-media/[email protected]
Signed-off-by: Zhou Qingyang <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/common/saa7146/saa7146_fops.c | 2 +-
drivers/media/pci/saa7146/hexium_gemini.c | 7 ++++++-
2 files changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/media/common/saa7146/saa7146_fops.c b/drivers/media/common/saa7146/saa7146_fops.c
index d6531874faa65..8047e305f3d01 100644
--- a/drivers/media/common/saa7146/saa7146_fops.c
+++ b/drivers/media/common/saa7146/saa7146_fops.c
@@ -523,7 +523,7 @@ int saa7146_vv_init(struct saa7146_dev* dev, struct saa7146_ext_vv *ext_vv)
ERR("out of memory. aborting.\n");
kfree(vv);
v4l2_ctrl_handler_free(hdl);
- return -1;
+ return -ENOMEM;
}
saa7146_video_uops.init(dev,vv);
diff --git a/drivers/media/pci/saa7146/hexium_gemini.c b/drivers/media/pci/saa7146/hexium_gemini.c
index 2214c74bbbf15..3947701cd6c7e 100644
--- a/drivers/media/pci/saa7146/hexium_gemini.c
+++ b/drivers/media/pci/saa7146/hexium_gemini.c
@@ -284,7 +284,12 @@ static int hexium_attach(struct saa7146_dev *dev, struct saa7146_pci_extension_d
hexium_set_input(hexium, 0);
hexium->cur_input = 0;
- saa7146_vv_init(dev, &vv_data);
+ ret = saa7146_vv_init(dev, &vv_data);
+ if (ret) {
+ i2c_del_adapter(&hexium->i2c_adapter);
+ kfree(hexium);
+ return ret;
+ }
vv_data.vid_ops.vidioc_enum_input = vidioc_enum_input;
vv_data.vid_ops.vidioc_g_input = vidioc_g_input;
--
2.34.1
From: Thierry Reding <[email protected]>
[ Upstream commit 2b14cbd643feea5fc17c6e8bead4e71088c69acd ]
The Tegra186 CCPLEX cluster register region is 4 MiB is length, not 4
MiB - 1. This was likely presumed to be the "limit" rather than length.
Fix it up.
Signed-off-by: Thierry Reding <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/nvidia/tegra186.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
index 0c46ab7bbbf37..eec6418ecdb1a 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
@@ -985,7 +985,7 @@
ccplex@e000000 {
compatible = "nvidia,tegra186-ccplex-cluster";
- reg = <0x0 0x0e000000 0x0 0x3fffff>;
+ reg = <0x0 0x0e000000 0x0 0x400000>;
nvidia,bpmp = <&bpmp>;
};
--
2.34.1
From: Cezary Rojewski <[email protected]>
[ Upstream commit 2a9a72e290d4a4741e673f86b9fba9bfb319786d ]
After calling dmaengine_submit(), the submitted transfer descriptor
belongs to the DMA engine. Pointer to that descriptor may no longer be
valid after the call and should be tested before awaiting transfer
completion.
Reported-by: Kevin Tian <[email protected]>
Suggested-by: Dave Jiang <[email protected]>
Fixes: 4fac9b31d0b9 ("ASoC: Intel: Add catpt base members")
Signed-off-by: Cezary Rojewski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/intel/catpt/dsp.c | 14 ++++++++++++--
1 file changed, 12 insertions(+), 2 deletions(-)
diff --git a/sound/soc/intel/catpt/dsp.c b/sound/soc/intel/catpt/dsp.c
index 9e807b9417321..38a92bbc1ed56 100644
--- a/sound/soc/intel/catpt/dsp.c
+++ b/sound/soc/intel/catpt/dsp.c
@@ -65,6 +65,7 @@ static int catpt_dma_memcpy(struct catpt_dev *cdev, struct dma_chan *chan,
{
struct dma_async_tx_descriptor *desc;
enum dma_status status;
+ int ret;
desc = dmaengine_prep_dma_memcpy(chan, dst_addr, src_addr, size,
DMA_CTRL_ACK);
@@ -77,13 +78,22 @@ static int catpt_dma_memcpy(struct catpt_dev *cdev, struct dma_chan *chan,
catpt_updatel_shim(cdev, HMDC,
CATPT_HMDC_HDDA(CATPT_DMA_DEVID, chan->chan_id),
CATPT_HMDC_HDDA(CATPT_DMA_DEVID, chan->chan_id));
- dmaengine_submit(desc);
+
+ ret = dma_submit_error(dmaengine_submit(desc));
+ if (ret) {
+ dev_err(cdev->dev, "submit tx failed: %d\n", ret);
+ goto clear_hdda;
+ }
+
status = dma_wait_for_async_tx(desc);
+ ret = (status == DMA_COMPLETE) ? 0 : -EPROTO;
+
+clear_hdda:
/* regardless of status, disable access to HOST memory in demand mode */
catpt_updatel_shim(cdev, HMDC,
CATPT_HMDC_HDDA(CATPT_DMA_DEVID, chan->chan_id), 0);
- return (status == DMA_COMPLETE) ? 0 : -EPROTO;
+ return ret;
}
int catpt_dma_memcpy_todsp(struct catpt_dev *cdev, struct dma_chan *chan,
--
2.34.1
From: Rafael J. Wysocki <[email protected]>
[ Upstream commit d1579e61192e0e686faa4208500ef4c3b529b16c ]
Because refcount_dec_not_one() returns true if the target refcount
becomes saturated, it is generally unsafe to use its return value as
a loop termination condition, but that is what happens when a device
link's supplier device is released during runtime PM suspend
operations and on device link removal.
To address this, introduce pm_runtime_release_supplier() to be used
in the above cases which will check the supplier device's runtime
PM usage counter in addition to the refcount_dec_not_one() return
value, so the loop can be terminated in case the rpm_active refcount
value becomes invalid, and update the code in question to use it as
appropriate.
This change is not expected to have any visible functional impact.
Reported-by: Peter Zijlstra <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Acked-by: Greg Kroah-Hartman <[email protected]>
Acked-by: Peter Zijlstra (Intel) <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/base/core.c | 3 +--
drivers/base/power/runtime.c | 41 ++++++++++++++++++++++++++----------
include/linux/pm_runtime.h | 3 +++
3 files changed, 34 insertions(+), 13 deletions(-)
diff --git a/drivers/base/core.c b/drivers/base/core.c
index 389d13616d1df..c0566aff53551 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -348,8 +348,7 @@ static void device_link_release_fn(struct work_struct *work)
/* Ensure that all references to the link object have been dropped. */
device_link_synchronize_removal();
- while (refcount_dec_not_one(&link->rpm_active))
- pm_runtime_put(link->supplier);
+ pm_runtime_release_supplier(link, true);
put_device(link->consumer);
put_device(link->supplier);
diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c
index bc649da4899a0..1573319404888 100644
--- a/drivers/base/power/runtime.c
+++ b/drivers/base/power/runtime.c
@@ -305,19 +305,40 @@ static int rpm_get_suppliers(struct device *dev)
return 0;
}
+/**
+ * pm_runtime_release_supplier - Drop references to device link's supplier.
+ * @link: Target device link.
+ * @check_idle: Whether or not to check if the supplier device is idle.
+ *
+ * Drop all runtime PM references associated with @link to its supplier device
+ * and if @check_idle is set, check if that device is idle (and so it can be
+ * suspended).
+ */
+void pm_runtime_release_supplier(struct device_link *link, bool check_idle)
+{
+ struct device *supplier = link->supplier;
+
+ /*
+ * The additional power.usage_count check is a safety net in case
+ * the rpm_active refcount becomes saturated, in which case
+ * refcount_dec_not_one() would return true forever, but it is not
+ * strictly necessary.
+ */
+ while (refcount_dec_not_one(&link->rpm_active) &&
+ atomic_read(&supplier->power.usage_count) > 0)
+ pm_runtime_put_noidle(supplier);
+
+ if (check_idle)
+ pm_request_idle(supplier);
+}
+
static void __rpm_put_suppliers(struct device *dev, bool try_to_suspend)
{
struct device_link *link;
list_for_each_entry_rcu(link, &dev->links.suppliers, c_node,
- device_links_read_lock_held()) {
-
- while (refcount_dec_not_one(&link->rpm_active))
- pm_runtime_put_noidle(link->supplier);
-
- if (try_to_suspend)
- pm_request_idle(link->supplier);
- }
+ device_links_read_lock_held())
+ pm_runtime_release_supplier(link, try_to_suspend);
}
static void rpm_put_suppliers(struct device *dev)
@@ -1755,9 +1776,7 @@ void pm_runtime_drop_link(struct device_link *link)
return;
pm_runtime_drop_link_count(link->consumer);
-
- while (refcount_dec_not_one(&link->rpm_active))
- pm_runtime_put(link->supplier);
+ pm_runtime_release_supplier(link, true);
}
static bool pm_runtime_need_not_resume(struct device *dev)
diff --git a/include/linux/pm_runtime.h b/include/linux/pm_runtime.h
index 161acd4ede448..30091ab5de287 100644
--- a/include/linux/pm_runtime.h
+++ b/include/linux/pm_runtime.h
@@ -58,6 +58,7 @@ extern void pm_runtime_get_suppliers(struct device *dev);
extern void pm_runtime_put_suppliers(struct device *dev);
extern void pm_runtime_new_link(struct device *dev);
extern void pm_runtime_drop_link(struct device_link *link);
+extern void pm_runtime_release_supplier(struct device_link *link, bool check_idle);
/**
* pm_runtime_get_if_in_use - Conditionally bump up runtime PM usage counter.
@@ -279,6 +280,8 @@ static inline void pm_runtime_get_suppliers(struct device *dev) {}
static inline void pm_runtime_put_suppliers(struct device *dev) {}
static inline void pm_runtime_new_link(struct device *dev) {}
static inline void pm_runtime_drop_link(struct device_link *link) {}
+static inline void pm_runtime_release_supplier(struct device_link *link,
+ bool check_idle) {}
#endif /* !CONFIG_PM */
--
2.34.1
From: Borislav Petkov <[email protected]>
[ Upstream commit 4fbce464db81a42f9a57ee242d6150ec7f996415 ]
Fixes
vmlinux.o: warning: objtool: do_machine_check()+0xdb1: call to queue_task_work() leaves .noinstr.text section
Signed-off-by: Borislav Petkov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/kernel/cpu/mce/core.c | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/arch/x86/kernel/cpu/mce/core.c b/arch/x86/kernel/cpu/mce/core.c
index 14b34963eb1f7..34fffffaf8730 100644
--- a/arch/x86/kernel/cpu/mce/core.c
+++ b/arch/x86/kernel/cpu/mce/core.c
@@ -1443,6 +1443,14 @@ noinstr void do_machine_check(struct pt_regs *regs)
if (worst != MCE_AR_SEVERITY && !kill_it)
goto out;
+ /*
+ * Enable instrumentation around the external facilities like
+ * task_work_add() (via queue_task_work()), fixup_exception() etc.
+ * For now, that is. Fixing this properly would need a lot more involved
+ * reorganization.
+ */
+ instrumentation_begin();
+
/* Fault was in user mode and we need to take some action */
if ((m.cs & 3) == 3) {
/* If this triggers there is no way to recover. Die hard. */
@@ -1468,6 +1476,9 @@ noinstr void do_machine_check(struct pt_regs *regs)
if (m.kflags & MCE_IN_KERNEL_COPYIN)
queue_task_work(&m, msg, kill_it);
}
+
+ instrumentation_end();
+
out:
mce_wrmsrl(MSR_IA32_MCG_STATUS, 0);
}
--
2.34.1
From: Baochen Qiang <[email protected]>
[ Upstream commit 273703ebdb01b6c5f1aaf4b98fb57b177609055c ]
Commit 31582373a4a8 ("ath11k: Change number of TCL rings to one for
QCA6390") avoids initializing the other entries of dp->tx_ring cause
the corresponding TX rings on QCA6390/WCN6855 are not used, but leaves
those ring masks in ath11k_hw_ring_mask_qca6390.tx unchanged. Normally
this is OK because we will only get interrupts from the first TX ring
on these chips and thus only the first entry of dp->tx_ring is involved.
In case of one MSI vector, all DP rings share the same IRQ. For each
interrupt, all rings have to be checked, which means the other entries
of dp->tx_ring are involved. However since they are not initialized,
system crashes.
Fix this issue by simply removing those ring masks.
crash stack:
[ 102.907438] BUG: kernel NULL pointer dereference, address: 0000000000000028
[ 102.907447] #PF: supervisor read access in kernel mode
[ 102.907451] #PF: error_code(0x0000) - not-present page
[ 102.907453] PGD 1081f0067 P4D 1081f0067 PUD 1081f1067 PMD 0
[ 102.907460] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC NOPTI
[ 102.907465] CPU: 0 PID: 3511 Comm: apt-check Kdump: loaded Tainted: G E 5.15.0-rc4-wt-ath+ #20
[ 102.907470] Hardware name: AMD Celadon-RN/Celadon-RN, BIOS RCD1005E 10/08/2020
[ 102.907472] RIP: 0010:ath11k_dp_tx_completion_handler+0x201/0x830 [ath11k]
[ 102.907497] Code: 3c 24 4e 8d ac 37 10 04 00 00 4a 8d bc 37 68 04 00 00 48 89 3c 24 48 63 c8 89 83 84 18 00 00 48 c1 e1 05 48 03 8b 78 18 00 00 <8b> 51 08 89 d6 83 e6 07 89 74 24 24 83 fe 03 74 04 85 f6 75 63 41
[ 102.907501] RSP: 0000:ffff9b7340003e08 EFLAGS: 00010202
[ 102.907505] RAX: 0000000000000001 RBX: ffff8e21530c0100 RCX: 0000000000000020
[ 102.907508] RDX: 0000000000000000 RSI: 00000000fffffe00 RDI: ffff8e21530c1938
[ 102.907511] RBP: ffff8e21530c0000 R08: 0000000000000001 R09: 0000000000000000
[ 102.907513] R10: ffff8e2145534c10 R11: 0000000000000001 R12: ffff8e21530c2938
[ 102.907515] R13: ffff8e21530c18e0 R14: 0000000000000100 R15: ffff8e21530c2978
[ 102.907518] FS: 00007f5d4297e740(0000) GS:ffff8e243d600000(0000) knlGS:0000000000000000
[ 102.907521] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 102.907524] CR2: 0000000000000028 CR3: 00000001034ea000 CR4: 0000000000350ef0
[ 102.907527] Call Trace:
[ 102.907531] <IRQ>
[ 102.907537] ath11k_dp_service_srng+0x5c/0x2f0 [ath11k]
[ 102.907556] ath11k_pci_ext_grp_napi_poll+0x21/0x70 [ath11k_pci]
[ 102.907562] __napi_poll+0x2c/0x160
[ 102.907570] net_rx_action+0x251/0x310
[ 102.907576] __do_softirq+0x107/0x2fc
[ 102.907585] irq_exit_rcu+0x74/0x90
[ 102.907593] common_interrupt+0x83/0xa0
[ 102.907600] </IRQ>
[ 102.907601] asm_common_interrupt+0x1e/0x40
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
Signed-off-by: Baochen Qiang <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/ath11k/hw.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/net/wireless/ath/ath11k/hw.c b/drivers/net/wireless/ath/ath11k/hw.c
index 66331da350129..f6282e8702923 100644
--- a/drivers/net/wireless/ath/ath11k/hw.c
+++ b/drivers/net/wireless/ath/ath11k/hw.c
@@ -246,8 +246,6 @@ const struct ath11k_hw_ring_mask ath11k_hw_ring_mask_ipq8074 = {
const struct ath11k_hw_ring_mask ath11k_hw_ring_mask_qca6390 = {
.tx = {
ATH11K_TX_RING_MASK_0,
- ATH11K_TX_RING_MASK_1,
- ATH11K_TX_RING_MASK_2,
},
.rx_mon_status = {
0, 0, 0, 0,
--
2.34.1
From: Mauro Carvalho Chehab <[email protected]>
[ Upstream commit 2c45e343c581091835c9047ed5298518aa133163 ]
The atomisp driver originally used the s_parm command to
initialize the run_mode type to the driver. So, before start
setting up the streaming, s_parm should be called.
So, even having 5 "normal" video devices, one meant to be used
for each type, the run_mode was actually selected when
s_parm is called.
Without setting the run mode, applications that don't call
VIDIOC_SET_PARM with a custom atomisp parameters won't work, as
the pipeline won't be set:
atomisp-isp2 0000:00:03.0: can't create streams
atomisp-isp2 0000:00:03.0: __get_frame_info 1600x1200 (padded to 0) returned -22
However, commit 8a7c5594c020 ("media: v4l2-ioctl: clear fields in s_parm")
broke support for it, with a good reason, as drivers shoudn't be
extending the API for their own purposes.
So, as an step to allow generic apps to use this driver, put
the device's run_mode in preview after open.
After this patch, using v4l2grab starts to work on preview
mode (/dev/video2):
$ v4l2grab -f YUYV -x 1600 -y 1200 -d /dev/video2 -n 1 -u
$ feh out000.pnm
So, let's just setup the default run_mode that each video devnode
should assume, setting it at open() time.
Reported-by: Tsuchiya Yuto <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/staging/media/atomisp/pci/atomisp_fops.c | 5 +++++
.../staging/media/atomisp/pci/atomisp_subdev.c | 15 ++++++++++-----
.../staging/media/atomisp/pci/atomisp_subdev.h | 3 +++
drivers/staging/media/atomisp/pci/atomisp_v4l2.c | 4 +++-
drivers/staging/media/atomisp/pci/atomisp_v4l2.h | 3 ++-
5 files changed, 23 insertions(+), 7 deletions(-)
diff --git a/drivers/staging/media/atomisp/pci/atomisp_fops.c b/drivers/staging/media/atomisp/pci/atomisp_fops.c
index 52d24c1ca0d64..b751df31cc24c 100644
--- a/drivers/staging/media/atomisp/pci/atomisp_fops.c
+++ b/drivers/staging/media/atomisp/pci/atomisp_fops.c
@@ -877,6 +877,11 @@ done:
else
pipe->users++;
rt_mutex_unlock(&isp->mutex);
+
+ /* Ensure that a mode is set */
+ if (asd)
+ v4l2_ctrl_s_ctrl(asd->run_mode, pipe->default_run_mode);
+
return 0;
css_error:
diff --git a/drivers/staging/media/atomisp/pci/atomisp_subdev.c b/drivers/staging/media/atomisp/pci/atomisp_subdev.c
index dcc2dd981ca60..628e85799274d 100644
--- a/drivers/staging/media/atomisp/pci/atomisp_subdev.c
+++ b/drivers/staging/media/atomisp/pci/atomisp_subdev.c
@@ -1178,23 +1178,28 @@ static int isp_subdev_init_entities(struct atomisp_sub_device *asd)
atomisp_init_acc_pipe(asd, &asd->video_acc);
- ret = atomisp_video_init(&asd->video_in, "MEMORY");
+ ret = atomisp_video_init(&asd->video_in, "MEMORY",
+ ATOMISP_RUN_MODE_SDV);
if (ret < 0)
return ret;
- ret = atomisp_video_init(&asd->video_out_capture, "CAPTURE");
+ ret = atomisp_video_init(&asd->video_out_capture, "CAPTURE",
+ ATOMISP_RUN_MODE_STILL_CAPTURE);
if (ret < 0)
return ret;
- ret = atomisp_video_init(&asd->video_out_vf, "VIEWFINDER");
+ ret = atomisp_video_init(&asd->video_out_vf, "VIEWFINDER",
+ ATOMISP_RUN_MODE_CONTINUOUS_CAPTURE);
if (ret < 0)
return ret;
- ret = atomisp_video_init(&asd->video_out_preview, "PREVIEW");
+ ret = atomisp_video_init(&asd->video_out_preview, "PREVIEW",
+ ATOMISP_RUN_MODE_PREVIEW);
if (ret < 0)
return ret;
- ret = atomisp_video_init(&asd->video_out_video_capture, "VIDEO");
+ ret = atomisp_video_init(&asd->video_out_video_capture, "VIDEO",
+ ATOMISP_RUN_MODE_VIDEO);
if (ret < 0)
return ret;
diff --git a/drivers/staging/media/atomisp/pci/atomisp_subdev.h b/drivers/staging/media/atomisp/pci/atomisp_subdev.h
index 330a77eed8aa6..12215d7406169 100644
--- a/drivers/staging/media/atomisp/pci/atomisp_subdev.h
+++ b/drivers/staging/media/atomisp/pci/atomisp_subdev.h
@@ -81,6 +81,9 @@ struct atomisp_video_pipe {
/* the link list to store per_frame parameters */
struct list_head per_frame_params;
+ /* Store here the initial run mode */
+ unsigned int default_run_mode;
+
unsigned int buffers_in_css;
/* irq_lock is used to protect video buffer state change operations and
diff --git a/drivers/staging/media/atomisp/pci/atomisp_v4l2.c b/drivers/staging/media/atomisp/pci/atomisp_v4l2.c
index 687e94e8b6ce5..8aeea74cfd06b 100644
--- a/drivers/staging/media/atomisp/pci/atomisp_v4l2.c
+++ b/drivers/staging/media/atomisp/pci/atomisp_v4l2.c
@@ -447,7 +447,8 @@ const struct atomisp_dfs_config dfs_config_cht_soc = {
.dfs_table_size = ARRAY_SIZE(dfs_rules_cht_soc),
};
-int atomisp_video_init(struct atomisp_video_pipe *video, const char *name)
+int atomisp_video_init(struct atomisp_video_pipe *video, const char *name,
+ unsigned int run_mode)
{
int ret;
const char *direction;
@@ -478,6 +479,7 @@ int atomisp_video_init(struct atomisp_video_pipe *video, const char *name)
"ATOMISP ISP %s %s", name, direction);
video->vdev.release = video_device_release_empty;
video_set_drvdata(&video->vdev, video->isp);
+ video->default_run_mode = run_mode;
return 0;
}
diff --git a/drivers/staging/media/atomisp/pci/atomisp_v4l2.h b/drivers/staging/media/atomisp/pci/atomisp_v4l2.h
index 81bb356b81720..72611b8286a4a 100644
--- a/drivers/staging/media/atomisp/pci/atomisp_v4l2.h
+++ b/drivers/staging/media/atomisp/pci/atomisp_v4l2.h
@@ -27,7 +27,8 @@ struct v4l2_device;
struct atomisp_device;
struct firmware;
-int atomisp_video_init(struct atomisp_video_pipe *video, const char *name);
+int atomisp_video_init(struct atomisp_video_pipe *video, const char *name,
+ unsigned int run_mode);
void atomisp_acc_init(struct atomisp_acc_pipe *video, const char *name);
void atomisp_video_unregister(struct atomisp_video_pipe *video);
void atomisp_acc_unregister(struct atomisp_acc_pipe *video);
--
2.34.1
From: Moshe Shemesh <[email protected]>
[ Upstream commit 8e715cd613a1e872b9d918e912d90b399785761a ]
Avoid a race where command work handler may fail to allocate command
entry index, by holding the command semaphore down till command entry
index is being freed.
Fixes: 410bd754cd73 ("net/mlx5: Add retry mechanism to the command entry index allocation")
Signed-off-by: Moshe Shemesh <[email protected]>
Reviewed-by: Eran Ben Elisha <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/mellanox/mlx5/core/cmd.c | 15 ++++++---------
1 file changed, 6 insertions(+), 9 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c
index 2e55e00888715..20e3f8cd074a1 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c
@@ -147,8 +147,12 @@ static void cmd_ent_put(struct mlx5_cmd_work_ent *ent)
if (!refcount_dec_and_test(&ent->refcnt))
return;
- if (ent->idx >= 0)
- cmd_free_index(ent->cmd, ent->idx);
+ if (ent->idx >= 0) {
+ struct mlx5_cmd *cmd = ent->cmd;
+
+ cmd_free_index(cmd, ent->idx);
+ up(ent->page_queue ? &cmd->pages_sem : &cmd->sem);
+ }
cmd_free_ent(ent);
}
@@ -1582,8 +1586,6 @@ static void mlx5_cmd_comp_handler(struct mlx5_core_dev *dev, u64 vec, bool force
vector = vec & 0xffffffff;
for (i = 0; i < (1 << cmd->log_sz); i++) {
if (test_bit(i, &vector)) {
- struct semaphore *sem;
-
ent = cmd->ent_arr[i];
/* if we already completed the command, ignore it */
@@ -1606,10 +1608,6 @@ static void mlx5_cmd_comp_handler(struct mlx5_core_dev *dev, u64 vec, bool force
dev->state == MLX5_DEVICE_STATE_INTERNAL_ERROR)
cmd_ent_put(ent);
- if (ent->page_queue)
- sem = &cmd->pages_sem;
- else
- sem = &cmd->sem;
ent->ts2 = ktime_get_ns();
memcpy(ent->out->first.data, ent->lay->out, sizeof(ent->lay->out));
dump_command(dev, ent, 0);
@@ -1663,7 +1661,6 @@ static void mlx5_cmd_comp_handler(struct mlx5_core_dev *dev, u64 vec, bool force
*/
complete(&ent->done);
}
- up(sem);
}
}
}
--
2.34.1
From: Marijn Suijten <[email protected]>
[ Upstream commit 2b4b49602f9feca7b7a84eaa33ad9e666c8aa695 ]
The length of qcom,enabled-strings as property array is enough to
determine the number of strings to be enabled, without needing to set
qcom,num-strings to override the default number of strings when less
than the default (which is also the maximum) is provided in DT.
This also introduces an extra warning when qcom,num-strings is set,
denoting that it is not necessary to set both anymore. It is usually
more concise to set just qcom,num-length when a zero-based, contiguous
range of strings is needed (the majority of the cases), or to only set
qcom,enabled-strings when a specific set of indices is desired.
Fixes: 775d2ffb4af6 ("backlight: qcom-wled: Restructure the driver for WLED3")
Signed-off-by: Marijn Suijten <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Reviewed-by: Daniel Thompson <[email protected]>
Signed-off-by: Lee Jones <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/video/backlight/qcom-wled.c | 12 +++++++++---
1 file changed, 9 insertions(+), 3 deletions(-)
diff --git a/drivers/video/backlight/qcom-wled.c b/drivers/video/backlight/qcom-wled.c
index 9e09165984b48..70fcee74866a5 100644
--- a/drivers/video/backlight/qcom-wled.c
+++ b/drivers/video/backlight/qcom-wled.c
@@ -1521,6 +1521,8 @@ static int wled_configure(struct wled *wled)
return -EINVAL;
}
}
+
+ cfg->num_strings = string_len;
}
rc = of_property_read_u32(dev->of_node, "qcom,num-strings", &val);
@@ -1531,9 +1533,13 @@ static int wled_configure(struct wled *wled)
return -EINVAL;
}
- if (string_len > 0 && val > string_len) {
- dev_err(dev, "qcom,num-strings exceeds qcom,enabled-strings\n");
- return -EINVAL;
+ if (string_len > 0) {
+ dev_warn(dev, "Only one of qcom,num-strings or qcom,enabled-strings"
+ " should be set\n");
+ if (val > string_len) {
+ dev_err(dev, "qcom,num-strings exceeds qcom,enabled-strings\n");
+ return -EINVAL;
+ }
}
cfg->num_strings = val;
--
2.34.1
From: Pavel Skripkin <[email protected]>
[ Upstream commit d668769eb9c52b150753f1653f7f5a0aeb8239d2 ]
Syzbot reported uninit value in mcs7830_bind(). The problem was in
missing validation check for bytes read via usbnet_read_cmd().
usbnet_read_cmd() internally calls usb_control_msg(), that returns
number of bytes read. Code should validate that requested number of bytes
was actually read.
So, this patch adds missing size validation check inside
mcs7830_get_reg() to prevent uninit value bugs
Reported-and-tested-by: [email protected]
Fixes: 2a36d7083438 ("USB: driver for mcs7830 (aka DeLOCK) USB ethernet adapter")
Signed-off-by: Pavel Skripkin <[email protected]>
Reviewed-by: Arnd Bergmann <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/usb/mcs7830.c | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
diff --git a/drivers/net/usb/mcs7830.c b/drivers/net/usb/mcs7830.c
index 09bfa6a4dfbc1..7e40e2e2f3723 100644
--- a/drivers/net/usb/mcs7830.c
+++ b/drivers/net/usb/mcs7830.c
@@ -108,8 +108,16 @@ static const char driver_name[] = "MOSCHIP usb-ethernet driver";
static int mcs7830_get_reg(struct usbnet *dev, u16 index, u16 size, void *data)
{
- return usbnet_read_cmd(dev, MCS7830_RD_BREQ, MCS7830_RD_BMREQ,
- 0x0000, index, data, size);
+ int ret;
+
+ ret = usbnet_read_cmd(dev, MCS7830_RD_BREQ, MCS7830_RD_BMREQ,
+ 0x0000, index, data, size);
+ if (ret < 0)
+ return ret;
+ else if (ret < size)
+ return -ENODATA;
+
+ return ret;
}
static int mcs7830_set_reg(struct usbnet *dev, u16 index, u16 size, const void *data)
--
2.34.1
From: Christophe Jaillet <[email protected]>
[ Upstream commit e96d52822f5ac0a25de78f95cd23421bcbc93584 ]
Commit 79ca6f74dae0 ("tpm: fix Atmel TPM crash caused by too frequent
queries") has moved some code around without updating the error handling
path.
This is now pointless to 'goto out_err' when neither 'clk_enable()' nor
'ioremap()' have been called yet.
Make a direct return instead to avoid undoing things that have not been
done.
Fixes: 79ca6f74dae0 ("tpm: fix Atmel TPM crash caused by too frequent queries")
Signed-off-by: Christophe Jaillet <[email protected]>
Reviewed-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/char/tpm/tpm_tis_core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/char/tpm/tpm_tis_core.c b/drivers/char/tpm/tpm_tis_core.c
index e2df1098a812f..36d1ad8f479d7 100644
--- a/drivers/char/tpm/tpm_tis_core.c
+++ b/drivers/char/tpm/tpm_tis_core.c
@@ -952,7 +952,7 @@ int tpm_tis_core_init(struct device *dev, struct tpm_tis_data *priv, int irq,
rc = tpm_tis_read32(priv, TPM_DID_VID(0), &vendor);
if (rc < 0)
- goto out_err;
+ return rc;
priv->manufacturer_id = vendor;
--
2.34.1
From: Ben Greear <[email protected]>
[ Upstream commit d943fdad7589653065be0e20aadc6dff37725ed4 ]
Similar to the same bug in ath10k, a napi disable w/out it being enabled
will hang forever. I believe I saw this while trying rmmod after driver
had some failure on startup. Fix it by keeping state on whether napi is
enabled or not.
And, remove un-used napi pointer in ath11k driver base struct.
Signed-off-by: Ben Greear <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/ath11k/ahb.c | 12 +++++++++---
drivers/net/wireless/ath/ath11k/core.h | 2 +-
drivers/net/wireless/ath/ath11k/pci.c | 12 +++++++++---
3 files changed, 19 insertions(+), 7 deletions(-)
diff --git a/drivers/net/wireless/ath/ath11k/ahb.c b/drivers/net/wireless/ath/ath11k/ahb.c
index e8cca58e18ffc..9ff6e68533142 100644
--- a/drivers/net/wireless/ath/ath11k/ahb.c
+++ b/drivers/net/wireless/ath/ath11k/ahb.c
@@ -175,8 +175,11 @@ static void __ath11k_ahb_ext_irq_disable(struct ath11k_base *ab)
ath11k_ahb_ext_grp_disable(irq_grp);
- napi_synchronize(&irq_grp->napi);
- napi_disable(&irq_grp->napi);
+ if (irq_grp->napi_enabled) {
+ napi_synchronize(&irq_grp->napi);
+ napi_disable(&irq_grp->napi);
+ irq_grp->napi_enabled = false;
+ }
}
}
@@ -300,7 +303,10 @@ static void ath11k_ahb_ext_irq_enable(struct ath11k_base *ab)
for (i = 0; i < ATH11K_EXT_IRQ_GRP_NUM_MAX; i++) {
struct ath11k_ext_irq_grp *irq_grp = &ab->ext_irq_grp[i];
- napi_enable(&irq_grp->napi);
+ if (!irq_grp->napi_enabled) {
+ napi_enable(&irq_grp->napi);
+ irq_grp->napi_enabled = true;
+ }
ath11k_ahb_ext_grp_enable(irq_grp);
}
}
diff --git a/drivers/net/wireless/ath/ath11k/core.h b/drivers/net/wireless/ath/ath11k/core.h
index c8e36251068c9..d2f2898d17b49 100644
--- a/drivers/net/wireless/ath/ath11k/core.h
+++ b/drivers/net/wireless/ath/ath11k/core.h
@@ -124,6 +124,7 @@ struct ath11k_ext_irq_grp {
u32 num_irq;
u32 grp_id;
u64 timestamp;
+ bool napi_enabled;
struct napi_struct napi;
struct net_device napi_ndev;
};
@@ -687,7 +688,6 @@ struct ath11k_base {
u32 wlan_init_status;
int irq_num[ATH11K_IRQ_NUM_MAX];
struct ath11k_ext_irq_grp ext_irq_grp[ATH11K_EXT_IRQ_GRP_NUM_MAX];
- struct napi_struct *napi;
struct ath11k_targ_cap target_caps;
u32 ext_service_bitmap[WMI_SERVICE_EXT_BM_SIZE];
bool pdevs_macaddr_valid;
diff --git a/drivers/net/wireless/ath/ath11k/pci.c b/drivers/net/wireless/ath/ath11k/pci.c
index d7eb6b7160bb4..105e344240c10 100644
--- a/drivers/net/wireless/ath/ath11k/pci.c
+++ b/drivers/net/wireless/ath/ath11k/pci.c
@@ -416,8 +416,11 @@ static void __ath11k_pci_ext_irq_disable(struct ath11k_base *sc)
ath11k_pci_ext_grp_disable(irq_grp);
- napi_synchronize(&irq_grp->napi);
- napi_disable(&irq_grp->napi);
+ if (irq_grp->napi_enabled) {
+ napi_synchronize(&irq_grp->napi);
+ napi_disable(&irq_grp->napi);
+ irq_grp->napi_enabled = false;
+ }
}
}
@@ -436,7 +439,10 @@ static void ath11k_pci_ext_irq_enable(struct ath11k_base *ab)
for (i = 0; i < ATH11K_EXT_IRQ_GRP_NUM_MAX; i++) {
struct ath11k_ext_irq_grp *irq_grp = &ab->ext_irq_grp[i];
- napi_enable(&irq_grp->napi);
+ if (!irq_grp->napi_enabled) {
+ napi_enable(&irq_grp->napi);
+ irq_grp->napi_enabled = true;
+ }
ath11k_pci_ext_grp_enable(irq_grp);
}
}
--
2.34.1
From: Mark Langsdorf <[email protected]>
[ Upstream commit f81bdeaf816142e0729eea0cc84c395ec9673151 ]
ACPICA commit bc02c76d518135531483dfc276ed28b7ee632ce1
The current ACPI_ACCESS_*_WIDTH defines do not provide a way to
test that size is small enough to not cause an overflow when
applied to a 32-bit integer.
Rather than adding more magic numbers, add ACPI_ACCESS_*_SHIFT,
ACPI_ACCESS_*_MAX, and ACPI_ACCESS_*_DEFAULT #defines and
redefine ACPI_ACCESS_*_WIDTH in terms of the new #defines.
This was inititally reported on Linux where a size of 102 in
ACPI_ACCESS_BIT_WIDTH caused an overflow error in the SPCR
initialization code.
Link: https://github.com/acpica/acpica/commit/bc02c76d
Signed-off-by: Mark Langsdorf <[email protected]>
Signed-off-by: Bob Moore <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/acpi/actypes.h | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/include/acpi/actypes.h b/include/acpi/actypes.h
index 647cb11d0a0a3..7334037624c5c 100644
--- a/include/acpi/actypes.h
+++ b/include/acpi/actypes.h
@@ -536,8 +536,14 @@ typedef u64 acpi_integer;
* Can be used with access_width of struct acpi_generic_address and access_size of
* struct acpi_resource_generic_register.
*/
-#define ACPI_ACCESS_BIT_WIDTH(size) (1 << ((size) + 2))
-#define ACPI_ACCESS_BYTE_WIDTH(size) (1 << ((size) - 1))
+#define ACPI_ACCESS_BIT_SHIFT 2
+#define ACPI_ACCESS_BYTE_SHIFT -1
+#define ACPI_ACCESS_BIT_MAX (31 - ACPI_ACCESS_BIT_SHIFT)
+#define ACPI_ACCESS_BYTE_MAX (31 - ACPI_ACCESS_BYTE_SHIFT)
+#define ACPI_ACCESS_BIT_DEFAULT (8 - ACPI_ACCESS_BIT_SHIFT)
+#define ACPI_ACCESS_BYTE_DEFAULT (8 - ACPI_ACCESS_BYTE_SHIFT)
+#define ACPI_ACCESS_BIT_WIDTH(size) (1 << ((size) + ACPI_ACCESS_BIT_SHIFT))
+#define ACPI_ACCESS_BYTE_WIDTH(size) (1 << ((size) + ACPI_ACCESS_BYTE_SHIFT))
/*******************************************************************************
*
--
2.34.1
From: Borislav Petkov <[email protected]>
[ Upstream commit 3c7ce80a818fa7950be123cac80cd078e5ac1013 ]
And allow instrumentation inside it because it does calls to other
facilities which will not be tagged noinstr.
Fixes
vmlinux.o: warning: objtool: do_machine_check()+0xc73: call to mce_panic() leaves .noinstr.text section
Signed-off-by: Borislav Petkov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/kernel/cpu/mce/core.c | 15 ++++++++++++---
1 file changed, 12 insertions(+), 3 deletions(-)
diff --git a/arch/x86/kernel/cpu/mce/core.c b/arch/x86/kernel/cpu/mce/core.c
index 34fffffaf8730..64d8a96a2bf1e 100644
--- a/arch/x86/kernel/cpu/mce/core.c
+++ b/arch/x86/kernel/cpu/mce/core.c
@@ -295,11 +295,17 @@ static void wait_for_panic(void)
panic("Panicing machine check CPU died");
}
-static void mce_panic(const char *msg, struct mce *final, char *exp)
+static noinstr void mce_panic(const char *msg, struct mce *final, char *exp)
{
- int apei_err = 0;
struct llist_node *pending;
struct mce_evt_llist *l;
+ int apei_err = 0;
+
+ /*
+ * Allow instrumentation around external facilities usage. Not that it
+ * matters a whole lot since the machine is going to panic anyway.
+ */
+ instrumentation_begin();
if (!fake_panic) {
/*
@@ -314,7 +320,7 @@ static void mce_panic(const char *msg, struct mce *final, char *exp)
} else {
/* Don't log too much for fake panic */
if (atomic_inc_return(&mce_fake_panicked) > 1)
- return;
+ goto out;
}
pending = mce_gen_pool_prepare_records();
/* First print corrected ones that are still unlogged */
@@ -352,6 +358,9 @@ static void mce_panic(const char *msg, struct mce *final, char *exp)
panic(msg);
} else
pr_emerg(HW_ERR "Fake kernel panic: %s\n", msg);
+
+out:
+ instrumentation_end();
}
/* Support code for software error injection */
--
2.34.1
From: Paul E. McKenney <[email protected]>
[ Upstream commit 2e27e793e280ff12cb5c202a1214c08b0d3a0f26 ]
Currently, WATCHDOG_THRESHOLD is set to detect a 62.5-millisecond skew in
a 500-millisecond WATCHDOG_INTERVAL. This requires that clocks be skewed
by more than 12.5% in order to be marked unstable. Except that a clock
that is skewed by that much is probably destroying unsuspecting software
right and left. And given that there are now checks for false-positive
skews due to delays between reading the two clocks, it should be possible
to greatly decrease WATCHDOG_THRESHOLD, at least for fine-grained clocks
such as TSC.
Therefore, add a new uncertainty_margin field to the clocksource structure
that contains the maximum uncertainty in nanoseconds for the corresponding
clock. This field may be initialized manually, as it is for
clocksource_tsc_early and clocksource_jiffies, which is copied to
refined_jiffies. If the field is not initialized manually, it will be
computed at clock-registry time as the period of the clock in question
based on the scale and freq parameters to __clocksource_update_freq_scale()
function. If either of those two parameters are zero, the
tens-of-milliseconds WATCHDOG_THRESHOLD is used as a cowardly alternative
to dividing by zero. No matter how the uncertainty_margin field is
calculated, it is bounded below by twice WATCHDOG_MAX_SKEW, that is, by 100
microseconds.
Note that manually initialized uncertainty_margin fields are not adjusted,
but there is a WARN_ON_ONCE() that triggers if any such field is less than
twice WATCHDOG_MAX_SKEW. This WARN_ON_ONCE() is intended to discourage
production use of the one-nanosecond uncertainty_margin values that are
used to test the clock-skew code itself.
The actual clock-skew check uses the sum of the uncertainty_margin fields
of the two clocksource structures being compared. Integer overflow is
avoided because the largest computed value of the uncertainty_margin
fields is one billion (10^9), and double that value fits into an
unsigned int. However, if someone manually specifies (say) UINT_MAX,
they will get what they deserve.
Note that the refined_jiffies uncertainty_margin field is initialized to
TICK_NSEC, which means that skew checks involving this clocksource will
be sufficently forgiving. In a similar vein, the clocksource_tsc_early
uncertainty_margin field is initialized to 32*NSEC_PER_MSEC, which
replicates the current behavior and allows custom setting if needed
in order to address the rare skews detected for this clocksource in
current mainline.
Suggested-by: Thomas Gleixner <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Acked-by: Feng Tang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/kernel/tsc.c | 1 +
include/linux/clocksource.h | 3 +++
kernel/time/clocksource.c | 48 +++++++++++++++++++++++++++++--------
kernel/time/jiffies.c | 15 ++++++------
4 files changed, 50 insertions(+), 17 deletions(-)
diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c
index f9f1b45e5ddc4..13d1a0ac8916a 100644
--- a/arch/x86/kernel/tsc.c
+++ b/arch/x86/kernel/tsc.c
@@ -1127,6 +1127,7 @@ static int tsc_cs_enable(struct clocksource *cs)
static struct clocksource clocksource_tsc_early = {
.name = "tsc-early",
.rating = 299,
+ .uncertainty_margin = 32 * NSEC_PER_MSEC,
.read = read_tsc,
.mask = CLOCKSOURCE_MASK(64),
.flags = CLOCK_SOURCE_IS_CONTINUOUS |
diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h
index 83a3ebff74560..8f87c1a6f3231 100644
--- a/include/linux/clocksource.h
+++ b/include/linux/clocksource.h
@@ -42,6 +42,8 @@ struct module;
* @shift: Cycle to nanosecond divisor (power of two)
* @max_idle_ns: Maximum idle time permitted by the clocksource (nsecs)
* @maxadj: Maximum adjustment value to mult (~11%)
+ * @uncertainty_margin: Maximum uncertainty in nanoseconds per half second.
+ * Zero says to use default WATCHDOG_THRESHOLD.
* @archdata: Optional arch-specific data
* @max_cycles: Maximum safe cycle value which won't overflow on
* multiplication
@@ -93,6 +95,7 @@ struct clocksource {
u32 shift;
u64 max_idle_ns;
u32 maxadj;
+ u32 uncertainty_margin;
#ifdef CONFIG_ARCH_CLOCKSOURCE_DATA
struct arch_clocksource_data archdata;
#endif
diff --git a/kernel/time/clocksource.c b/kernel/time/clocksource.c
index 74492f08660c4..d0803a69a2009 100644
--- a/kernel/time/clocksource.c
+++ b/kernel/time/clocksource.c
@@ -93,6 +93,20 @@ static char override_name[CS_NAME_LEN];
static int finished_booting;
static u64 suspend_start;
+/*
+ * Threshold: 0.0312s, when doubled: 0.0625s.
+ * Also a default for cs->uncertainty_margin when registering clocks.
+ */
+#define WATCHDOG_THRESHOLD (NSEC_PER_SEC >> 5)
+
+/*
+ * Maximum permissible delay between two readouts of the watchdog
+ * clocksource surrounding a read of the clocksource being validated.
+ * This delay could be due to SMIs, NMIs, or to VCPU preemptions. Used as
+ * a lower bound for cs->uncertainty_margin values when registering clocks.
+ */
+#define WATCHDOG_MAX_SKEW (50 * NSEC_PER_USEC)
+
#ifdef CONFIG_CLOCKSOURCE_WATCHDOG
static void clocksource_watchdog_work(struct work_struct *work);
static void clocksource_select(void);
@@ -119,17 +133,9 @@ static int clocksource_watchdog_kthread(void *data);
static void __clocksource_change_rating(struct clocksource *cs, int rating);
/*
- * Interval: 0.5sec Threshold: 0.0625s
+ * Interval: 0.5sec.
*/
#define WATCHDOG_INTERVAL (HZ >> 1)
-#define WATCHDOG_THRESHOLD (NSEC_PER_SEC >> 4)
-
-/*
- * Maximum permissible delay between two readouts of the watchdog
- * clocksource surrounding a read of the clocksource being validated.
- * This delay could be due to SMIs, NMIs, or to VCPU preemptions.
- */
-#define WATCHDOG_MAX_SKEW (100 * NSEC_PER_USEC)
static void clocksource_watchdog_work(struct work_struct *work)
{
@@ -284,6 +290,7 @@ static void clocksource_watchdog(struct timer_list *unused)
int next_cpu, reset_pending;
int64_t wd_nsec, cs_nsec;
struct clocksource *cs;
+ u32 md;
spin_lock(&watchdog_lock);
if (!watchdog_running)
@@ -330,7 +337,8 @@ static void clocksource_watchdog(struct timer_list *unused)
continue;
/* Check the deviation from the watchdog clocksource. */
- if (abs(cs_nsec - wd_nsec) > WATCHDOG_THRESHOLD) {
+ md = cs->uncertainty_margin + watchdog->uncertainty_margin;
+ if (abs(cs_nsec - wd_nsec) > md) {
pr_warn("timekeeping watchdog on CPU%d: Marking clocksource '%s' as unstable because the skew is too large:\n",
smp_processor_id(), cs->name);
pr_warn(" '%s' wd_now: %llx wd_last: %llx mask: %llx\n",
@@ -985,6 +993,26 @@ void __clocksource_update_freq_scale(struct clocksource *cs, u32 scale, u32 freq
clocks_calc_mult_shift(&cs->mult, &cs->shift, freq,
NSEC_PER_SEC / scale, sec * scale);
}
+
+ /*
+ * If the uncertainty margin is not specified, calculate it.
+ * If both scale and freq are non-zero, calculate the clock
+ * period, but bound below at 2*WATCHDOG_MAX_SKEW. However,
+ * if either of scale or freq is zero, be very conservative and
+ * take the tens-of-milliseconds WATCHDOG_THRESHOLD value for the
+ * uncertainty margin. Allow stupidly small uncertainty margins
+ * to be specified by the caller for testing purposes, but warn
+ * to discourage production use of this capability.
+ */
+ if (scale && freq && !cs->uncertainty_margin) {
+ cs->uncertainty_margin = NSEC_PER_SEC / (scale * freq);
+ if (cs->uncertainty_margin < 2 * WATCHDOG_MAX_SKEW)
+ cs->uncertainty_margin = 2 * WATCHDOG_MAX_SKEW;
+ } else if (!cs->uncertainty_margin) {
+ cs->uncertainty_margin = WATCHDOG_THRESHOLD;
+ }
+ WARN_ON_ONCE(cs->uncertainty_margin < 2 * WATCHDOG_MAX_SKEW);
+
/*
* Ensure clocksources that have large 'mult' values don't overflow
* when adjusted.
diff --git a/kernel/time/jiffies.c b/kernel/time/jiffies.c
index eddcf49704445..65409abcca8e1 100644
--- a/kernel/time/jiffies.c
+++ b/kernel/time/jiffies.c
@@ -49,13 +49,14 @@ static u64 jiffies_read(struct clocksource *cs)
* for "tick-less" systems.
*/
static struct clocksource clocksource_jiffies = {
- .name = "jiffies",
- .rating = 1, /* lowest valid rating*/
- .read = jiffies_read,
- .mask = CLOCKSOURCE_MASK(32),
- .mult = TICK_NSEC << JIFFIES_SHIFT, /* details above */
- .shift = JIFFIES_SHIFT,
- .max_cycles = 10,
+ .name = "jiffies",
+ .rating = 1, /* lowest valid rating*/
+ .uncertainty_margin = 32 * NSEC_PER_MSEC,
+ .read = jiffies_read,
+ .mask = CLOCKSOURCE_MASK(32),
+ .mult = TICK_NSEC << JIFFIES_SHIFT, /* details above */
+ .shift = JIFFIES_SHIFT,
+ .max_cycles = 10,
};
__cacheline_aligned_in_smp DEFINE_RAW_SPINLOCK(jiffies_lock);
--
2.34.1
From: Hans de Goede <[email protected]>
[ Upstream commit 4492289c31364d28c2680b43b18883385a5d216c ]
Now that we restore the default or last user set exposure setting on
power_up() there is no need for the registers written by ov2680_set_fmt()
to write to the exposure register.
Not doing so fixes the exposure always being reset to the value from
the res->regs array after a set_fmt().
Link: https://lore.kernel.org/linux-media/[email protected]
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/staging/media/atomisp/i2c/ov2680.h | 24 ----------------------
1 file changed, 24 deletions(-)
diff --git a/drivers/staging/media/atomisp/i2c/ov2680.h b/drivers/staging/media/atomisp/i2c/ov2680.h
index 49920245e0647..cafb798a71abe 100644
--- a/drivers/staging/media/atomisp/i2c/ov2680.h
+++ b/drivers/staging/media/atomisp/i2c/ov2680.h
@@ -289,8 +289,6 @@ static struct ov2680_reg const ov2680_global_setting[] = {
*/
static struct ov2680_reg const ov2680_QCIF_30fps[] = {
{0x3086, 0x01},
- {0x3501, 0x24},
- {0x3502, 0x40},
{0x370a, 0x23},
{0x3801, 0xa0},
{0x3802, 0x00},
@@ -334,8 +332,6 @@ static struct ov2680_reg const ov2680_QCIF_30fps[] = {
*/
static struct ov2680_reg const ov2680_CIF_30fps[] = {
{0x3086, 0x01},
- {0x3501, 0x24},
- {0x3502, 0x40},
{0x370a, 0x23},
{0x3801, 0xa0},
{0x3802, 0x00},
@@ -377,8 +373,6 @@ static struct ov2680_reg const ov2680_CIF_30fps[] = {
*/
static struct ov2680_reg const ov2680_QVGA_30fps[] = {
{0x3086, 0x01},
- {0x3501, 0x24},
- {0x3502, 0x40},
{0x370a, 0x23},
{0x3801, 0xa0},
{0x3802, 0x00},
@@ -420,8 +414,6 @@ static struct ov2680_reg const ov2680_QVGA_30fps[] = {
*/
static struct ov2680_reg const ov2680_656x496_30fps[] = {
{0x3086, 0x01},
- {0x3501, 0x24},
- {0x3502, 0x40},
{0x370a, 0x23},
{0x3801, 0xa0},
{0x3802, 0x00},
@@ -463,8 +455,6 @@ static struct ov2680_reg const ov2680_656x496_30fps[] = {
*/
static struct ov2680_reg const ov2680_720x592_30fps[] = {
{0x3086, 0x01},
- {0x3501, 0x26},
- {0x3502, 0x40},
{0x370a, 0x23},
{0x3801, 0x00}, // X_ADDR_START;
{0x3802, 0x00},
@@ -508,8 +498,6 @@ static struct ov2680_reg const ov2680_720x592_30fps[] = {
*/
static struct ov2680_reg const ov2680_800x600_30fps[] = {
{0x3086, 0x01},
- {0x3501, 0x26},
- {0x3502, 0x40},
{0x370a, 0x23},
{0x3801, 0x00},
{0x3802, 0x00},
@@ -551,8 +539,6 @@ static struct ov2680_reg const ov2680_800x600_30fps[] = {
*/
static struct ov2680_reg const ov2680_720p_30fps[] = {
{0x3086, 0x00},
- {0x3501, 0x48},
- {0x3502, 0xe0},
{0x370a, 0x21},
{0x3801, 0xa0},
{0x3802, 0x00},
@@ -594,8 +580,6 @@ static struct ov2680_reg const ov2680_720p_30fps[] = {
*/
static struct ov2680_reg const ov2680_1296x976_30fps[] = {
{0x3086, 0x00},
- {0x3501, 0x48},
- {0x3502, 0xe0},
{0x370a, 0x21},
{0x3801, 0xa0},
{0x3802, 0x00},
@@ -637,8 +621,6 @@ static struct ov2680_reg const ov2680_1296x976_30fps[] = {
*/
static struct ov2680_reg const ov2680_1456x1096_30fps[] = {
{0x3086, 0x00},
- {0x3501, 0x48},
- {0x3502, 0xe0},
{0x370a, 0x21},
{0x3801, 0x90},
{0x3802, 0x00},
@@ -682,8 +664,6 @@ static struct ov2680_reg const ov2680_1456x1096_30fps[] = {
static struct ov2680_reg const ov2680_1616x916_30fps[] = {
{0x3086, 0x00},
- {0x3501, 0x48},
- {0x3502, 0xe0},
{0x370a, 0x21},
{0x3801, 0x00},
{0x3802, 0x00},
@@ -726,8 +706,6 @@ static struct ov2680_reg const ov2680_1616x916_30fps[] = {
#if 0
static struct ov2680_reg const ov2680_1616x1082_30fps[] = {
{0x3086, 0x00},
- {0x3501, 0x48},
- {0x3502, 0xe0},
{0x370a, 0x21},
{0x3801, 0x00},
{0x3802, 0x00},
@@ -769,8 +747,6 @@ static struct ov2680_reg const ov2680_1616x1082_30fps[] = {
*/
static struct ov2680_reg const ov2680_1616x1216_30fps[] = {
{0x3086, 0x00},
- {0x3501, 0x48},
- {0x3502, 0xe0},
{0x370a, 0x21},
{0x3801, 0x00},
{0x3802, 0x00},
--
2.34.1
From: Hans de Goede <[email protected]>
[ Upstream commit ba46e42e925b5d09b4e441f8de3db119cc7df58f ]
Not all ACPI-devices have a HID + UID, allow specifying quirks for
acpi_device_override_status() by path too.
Note this moves the path/HID+UID check to after the CPU + DMI checks
since the path lookup is somewhat costly.
This way this lookup is only done on devices where the other checks
match.
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/acpi/x86/utils.c | 42 ++++++++++++++++++++++++++++++----------
1 file changed, 32 insertions(+), 10 deletions(-)
diff --git a/drivers/acpi/x86/utils.c b/drivers/acpi/x86/utils.c
index c6b0782dcced5..91bbc4b6b8035 100644
--- a/drivers/acpi/x86/utils.c
+++ b/drivers/acpi/x86/utils.c
@@ -38,22 +38,30 @@ struct override_status_id {
struct x86_cpu_id cpu_ids[2];
struct dmi_system_id dmi_ids[2]; /* Optional */
const char *uid;
+ const char *path;
unsigned long long status;
};
-#define ENTRY(status, hid, uid, cpu_model, dmi...) { \
+#define ENTRY(status, hid, uid, path, cpu_model, dmi...) { \
{ { hid, }, {} }, \
{ X86_MATCH_INTEL_FAM6_MODEL(cpu_model, NULL), {} }, \
{ { .matches = dmi }, {} }, \
uid, \
+ path, \
status, \
}
#define PRESENT_ENTRY_HID(hid, uid, cpu_model, dmi...) \
- ENTRY(ACPI_STA_DEFAULT, hid, uid, cpu_model, dmi)
+ ENTRY(ACPI_STA_DEFAULT, hid, uid, NULL, cpu_model, dmi)
#define NOT_PRESENT_ENTRY_HID(hid, uid, cpu_model, dmi...) \
- ENTRY(0, hid, uid, cpu_model, dmi)
+ ENTRY(0, hid, uid, NULL, cpu_model, dmi)
+
+#define PRESENT_ENTRY_PATH(path, cpu_model, dmi...) \
+ ENTRY(ACPI_STA_DEFAULT, "", NULL, path, cpu_model, dmi)
+
+#define NOT_PRESENT_ENTRY_PATH(path, cpu_model, dmi...) \
+ ENTRY(0, "", NULL, path, cpu_model, dmi)
static const struct override_status_id override_status_ids[] = {
/*
@@ -120,13 +128,6 @@ bool acpi_device_override_status(struct acpi_device *adev, unsigned long long *s
unsigned int i;
for (i = 0; i < ARRAY_SIZE(override_status_ids); i++) {
- if (acpi_match_device_ids(adev, override_status_ids[i].hid))
- continue;
-
- if (!adev->pnp.unique_id ||
- strcmp(adev->pnp.unique_id, override_status_ids[i].uid))
- continue;
-
if (!x86_match_cpu(override_status_ids[i].cpu_ids))
continue;
@@ -134,6 +135,27 @@ bool acpi_device_override_status(struct acpi_device *adev, unsigned long long *s
!dmi_check_system(override_status_ids[i].dmi_ids))
continue;
+ if (override_status_ids[i].path) {
+ struct acpi_buffer path = { ACPI_ALLOCATE_BUFFER, NULL };
+ bool match;
+
+ if (acpi_get_name(adev->handle, ACPI_FULL_PATHNAME, &path))
+ continue;
+
+ match = strcmp((char *)path.pointer, override_status_ids[i].path) == 0;
+ kfree(path.pointer);
+
+ if (!match)
+ continue;
+ } else {
+ if (acpi_match_device_ids(adev, override_status_ids[i].hid))
+ continue;
+
+ if (!adev->pnp.unique_id ||
+ strcmp(adev->pnp.unique_id, override_status_ids[i].uid))
+ continue;
+ }
+
*status = override_status_ids[i].status;
ret = true;
break;
--
2.34.1
From: Mansur Alisha Shaik <[email protected]>
[ Upstream commit 91f2b7d269e5c885c38c7ffa261f5276bd42f907 ]
In existing implementation, core_clk_setrate() is getting called
concurrently in concurrent video sessions. Before the previous call to
core_clk_setrate returns, new call to core_clk_setrate is invoked from
another video session running concurrently. This results in latest
calculated frequency being set (higher/lower) instead of actual frequency
required for that video session. It also results in stability crashes
mention below. These resources are specific to video core, hence keeping
under core lock would ensure that they are estimated for all running video
sessions and called once for the video core.
Crash logs:
[ 1.900089] WARNING: CPU: 4 PID: 1 at drivers/opp/debugfs.c:33 opp_debug_remove_one+0x2c/0x48
[ 1.908493] Modules linked in:
[ 1.911524] CPU: 4 PID: 1 Comm: swapper/0 Not tainted 5.10.67 #35 f8edb8c30cf2dd6838495dd9ef9be47af7f5f60c
[ 1.921036] Hardware name: Qualcomm Technologies, Inc. sc7280 IDP SKU2 platform (DT)
[ 1.928673] pstate: 60800009 (nZCv daif -PAN +UAO -TCO BTYPE=--)
[ 1.934608] pc : opp_debug_remove_one+0x2c/0x48
[ 1.939080] lr : opp_debug_remove_one+0x2c/0x48
[ 1.943560] sp : ffffffc011d7b7f0
[ 1.946836] pmr_save: 000000e0
[ 1.949854] x29: ffffffc011d7b7f0 x28: ffffffc010733bbc
[ 1.955104] x27: ffffffc010733ba8 x26: ffffff8083cedd00
[ 1.960355] x25: 0000000000000001 x24: 0000000000000000
[ 1.965603] x23: ffffff8083cc2878 x22: ffffff8083ceb900
[ 1.970852] x21: ffffff8083ceb910 x20: ffffff8083cc2800
[ 1.976101] x19: ffffff8083ceb900 x18: 00000000ffff0a10
[ 1.981352] x17: ffffff80837a5620 x16: 00000000000000ec
[ 1.986601] x15: ffffffc010519ad4 x14: 0000000000000003
[ 1.991849] x13: 0000000000000004 x12: 0000000000000001
[ 1.997100] x11: c0000000ffffdfff x10: 00000000ffffffff
[ 2.002348] x9 : d2627c580300dc00 x8 : d2627c580300dc00
[ 2.007596] x7 : 0720072007200720 x6 : ffffff80802ecf00
[ 2.012845] x5 : 0000000000190004 x4 : 0000000000000000
[ 2.018094] x3 : ffffffc011d7b478 x2 : ffffffc011d7b480
[ 2.023343] x1 : 00000000ffffdfff x0 : 0000000000000017
[ 2.028594] Call trace:
[ 2.031022] opp_debug_remove_one+0x2c/0x48
[ 2.035160] dev_pm_opp_put+0x94/0xb0
[ 2.038780] _opp_remove_all+0x7c/0xc8
[ 2.042486] _opp_remove_all_static+0x54/0x7c
[ 2.046796] dev_pm_opp_remove_table+0x74/0x98
[ 2.051183] devm_pm_opp_of_table_release+0x18/0x24
[ 2.056001] devm_action_release+0x1c/0x28
[ 2.060053] release_nodes+0x23c/0x2b8
[ 2.063760] devres_release_group+0xcc/0xd0
[ 2.067900] component_bind+0xac/0x168
[ 2.071608] component_bind_all+0x98/0x124
[ 2.075664] msm_drm_bind+0x1e8/0x678
[ 2.079287] try_to_bring_up_master+0x60/0x134
[ 2.083674] component_master_add_with_match+0xd8/0x120
[ 2.088834] msm_pdev_probe+0x20c/0x2a0
[ 2.092629] platform_drv_probe+0x9c/0xbc
[ 2.096598] really_probe+0x11c/0x46c
[ 2.100217] driver_probe_device+0x8c/0xf0
[ 2.104270] device_driver_attach+0x54/0x78
[ 2.108407] __driver_attach+0x48/0x148
[ 2.112201] bus_for_each_dev+0x88/0xd4
[ 2.115998] driver_attach+0x2c/0x38
[ 2.119534] bus_add_driver+0x10c/0x200
[ 2.123330] driver_register+0x6c/0x104
[ 2.127122] __platform_driver_register+0x4c/0x58
[ 2.131767] msm_drm_register+0x6c/0x70
[ 2.135560] do_one_initcall+0x64/0x23c
[ 2.139357] do_initcall_level+0xac/0x15c
[ 2.143321] do_initcalls+0x5c/0x9c
[ 2.146778] do_basic_setup+0x2c/0x38
[ 2.150401] kernel_init_freeable+0xf8/0x15c
[ 2.154622] kernel_init+0x1c/0x11c
[ 2.158079] ret_from_fork+0x10/0x30
[ 2.161615] ---[ end trace a2cc45a0f784b212 ]---
[ 2.166272] Removing OPP: 300000000
Signed-off-by: Mansur Alisha Shaik <[email protected]>
Signed-off-by: Stanimir Varbanov <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../media/platform/qcom/venus/pm_helpers.c | 28 +++++++++----------
1 file changed, 14 insertions(+), 14 deletions(-)
diff --git a/drivers/media/platform/qcom/venus/pm_helpers.c b/drivers/media/platform/qcom/venus/pm_helpers.c
index 63095d70f8d82..710f9a2b132b0 100644
--- a/drivers/media/platform/qcom/venus/pm_helpers.c
+++ b/drivers/media/platform/qcom/venus/pm_helpers.c
@@ -147,14 +147,12 @@ static u32 load_per_type(struct venus_core *core, u32 session_type)
struct venus_inst *inst = NULL;
u32 mbs_per_sec = 0;
- mutex_lock(&core->lock);
list_for_each_entry(inst, &core->instances, list) {
if (inst->session_type != session_type)
continue;
mbs_per_sec += load_per_instance(inst);
}
- mutex_unlock(&core->lock);
return mbs_per_sec;
}
@@ -203,14 +201,12 @@ static int load_scale_bw(struct venus_core *core)
struct venus_inst *inst = NULL;
u32 mbs_per_sec, avg, peak, total_avg = 0, total_peak = 0;
- mutex_lock(&core->lock);
list_for_each_entry(inst, &core->instances, list) {
mbs_per_sec = load_per_instance(inst);
mbs_to_bw(inst, mbs_per_sec, &avg, &peak);
total_avg += avg;
total_peak += peak;
}
- mutex_unlock(&core->lock);
/*
* keep minimum bandwidth vote for "video-mem" path,
@@ -237,8 +233,9 @@ static int load_scale_v1(struct venus_inst *inst)
struct device *dev = core->dev;
u32 mbs_per_sec;
unsigned int i;
- int ret;
+ int ret = 0;
+ mutex_lock(&core->lock);
mbs_per_sec = load_per_type(core, VIDC_SESSION_TYPE_ENC) +
load_per_type(core, VIDC_SESSION_TYPE_DEC);
@@ -263,17 +260,19 @@ set_freq:
if (ret) {
dev_err(dev, "failed to set clock rate %lu (%d)\n",
freq, ret);
- return ret;
+ goto exit;
}
ret = load_scale_bw(core);
if (ret) {
dev_err(dev, "failed to set bandwidth (%d)\n",
ret);
- return ret;
+ goto exit;
}
- return 0;
+exit:
+ mutex_unlock(&core->lock);
+ return ret;
}
static int core_get_v1(struct venus_core *core)
@@ -960,13 +959,13 @@ static int load_scale_v4(struct venus_inst *inst)
struct device *dev = core->dev;
unsigned long freq = 0, freq_core1 = 0, freq_core2 = 0;
unsigned long filled_len = 0;
- int i, ret;
+ int i, ret = 0;
for (i = 0; i < inst->num_input_bufs; i++)
filled_len = max(filled_len, inst->payloads[i]);
if (inst->session_type == VIDC_SESSION_TYPE_DEC && !filled_len)
- return 0;
+ return ret;
freq = calculate_inst_freq(inst, filled_len);
inst->clk_data.freq = freq;
@@ -982,7 +981,6 @@ static int load_scale_v4(struct venus_inst *inst)
freq_core2 += inst->clk_data.freq;
}
}
- mutex_unlock(&core->lock);
freq = max(freq_core1, freq_core2);
@@ -1006,17 +1004,19 @@ set_freq:
if (ret) {
dev_err(dev, "failed to set clock rate %lu (%d)\n",
freq, ret);
- return ret;
+ goto exit;
}
ret = load_scale_bw(core);
if (ret) {
dev_err(dev, "failed to set bandwidth (%d)\n",
ret);
- return ret;
+ goto exit;
}
- return 0;
+exit:
+ mutex_unlock(&core->lock);
+ return ret;
}
static const struct venus_pm_ops pm_ops_v4 = {
--
2.34.1
From: Laurent Pinchart <[email protected]>
[ Upstream commit f0ce591dc9a97067c6e783a2eaccd22c5476144d ]
When the CMM is enabled, an offset of 25 pixels must be subtracted from
the HDS (horizontal display start) and HDE (horizontal display end)
registers. Fix the timings calculation, and take this into account in
the mode validation.
This fixes a visible horizontal offset in the image with VGA monitors.
HDMI monitors seem to be generally more tolerant to incorrect timings,
but may be affected too.
Signed-off-by: Laurent Pinchart <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/rcar-du/rcar_du_crtc.c | 20 ++++++++++++++++----
1 file changed, 16 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
index 1b9738e44909d..065604c5837de 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
@@ -215,6 +215,7 @@ static void rcar_du_crtc_set_display_timing(struct rcar_du_crtc *rcrtc)
const struct drm_display_mode *mode = &rcrtc->crtc.state->adjusted_mode;
struct rcar_du_device *rcdu = rcrtc->dev;
unsigned long mode_clock = mode->clock * 1000;
+ unsigned int hdse_offset;
u32 dsmr;
u32 escr;
@@ -298,10 +299,15 @@ static void rcar_du_crtc_set_display_timing(struct rcar_du_crtc *rcrtc)
| DSMR_DIPM_DISP | DSMR_CSPM;
rcar_du_crtc_write(rcrtc, DSMR, dsmr);
+ hdse_offset = 19;
+ if (rcrtc->group->cmms_mask & BIT(rcrtc->index % 2))
+ hdse_offset += 25;
+
/* Display timings */
- rcar_du_crtc_write(rcrtc, HDSR, mode->htotal - mode->hsync_start - 19);
+ rcar_du_crtc_write(rcrtc, HDSR, mode->htotal - mode->hsync_start -
+ hdse_offset);
rcar_du_crtc_write(rcrtc, HDER, mode->htotal - mode->hsync_start +
- mode->hdisplay - 19);
+ mode->hdisplay - hdse_offset);
rcar_du_crtc_write(rcrtc, HSWR, mode->hsync_end -
mode->hsync_start - 1);
rcar_du_crtc_write(rcrtc, HCR, mode->htotal - 1);
@@ -831,6 +837,7 @@ rcar_du_crtc_mode_valid(struct drm_crtc *crtc,
struct rcar_du_crtc *rcrtc = to_rcar_crtc(crtc);
struct rcar_du_device *rcdu = rcrtc->dev;
bool interlaced = mode->flags & DRM_MODE_FLAG_INTERLACE;
+ unsigned int min_sync_porch;
unsigned int vbp;
if (interlaced && !rcar_du_has(rcdu, RCAR_DU_FEATURE_INTERLACED))
@@ -838,9 +845,14 @@ rcar_du_crtc_mode_valid(struct drm_crtc *crtc,
/*
* The hardware requires a minimum combined horizontal sync and back
- * porch of 20 pixels and a minimum vertical back porch of 3 lines.
+ * porch of 20 pixels (when CMM isn't used) or 45 pixels (when CMM is
+ * used), and a minimum vertical back porch of 3 lines.
*/
- if (mode->htotal - mode->hsync_start < 20)
+ min_sync_porch = 20;
+ if (rcrtc->group->cmms_mask & BIT(rcrtc->index % 2))
+ min_sync_porch += 25;
+
+ if (mode->htotal - mode->hsync_start < min_sync_porch)
return MODE_HBLANK_NARROW;
vbp = (mode->vtotal - mode->vsync_end) / (interlaced ? 2 : 1);
--
2.34.1
From: Lukas Bulwahn <[email protected]>
[ Upstream commit b0100bce4ff82ec1ccd3c1f3d339fd2df6a81784 ]
Since commit 4b563a066611 ("ARM: imx: Remove imx21 support"), the config
DEBUG_IMX21_IMX27_UART is really only debug support for IMX27.
So, rename this option to DEBUG_IMX27_UART and adjust dependencies in
Kconfig and rename the definitions to IMX27 as further clean-up.
This issue was discovered with ./scripts/checkkconfigsymbols.py, which
reported that DEBUG_IMX21_IMX27_UART depends on the non-existing config
SOC_IMX21.
Signed-off-by: Lukas Bulwahn <[email protected]>
Reviewed-by: Arnd Bergmann <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/Kconfig.debug | 14 +++++++-------
arch/arm/include/debug/imx-uart.h | 18 +++++++++---------
2 files changed, 16 insertions(+), 16 deletions(-)
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 8986a91a6f31b..dd1cf70353986 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -400,12 +400,12 @@ choice
Say Y here if you want kernel low-level debugging support
on i.MX25.
- config DEBUG_IMX21_IMX27_UART
- bool "i.MX21 and i.MX27 Debug UART"
- depends on SOC_IMX21 || SOC_IMX27
+ config DEBUG_IMX27_UART
+ bool "i.MX27 Debug UART"
+ depends on SOC_IMX27
help
Say Y here if you want kernel low-level debugging support
- on i.MX21 or i.MX27.
+ on i.MX27.
config DEBUG_IMX28_UART
bool "i.MX28 Debug UART"
@@ -1523,7 +1523,7 @@ config DEBUG_IMX_UART_PORT
int "i.MX Debug UART Port Selection"
depends on DEBUG_IMX1_UART || \
DEBUG_IMX25_UART || \
- DEBUG_IMX21_IMX27_UART || \
+ DEBUG_IMX27_UART || \
DEBUG_IMX31_UART || \
DEBUG_IMX35_UART || \
DEBUG_IMX50_UART || \
@@ -1591,12 +1591,12 @@ config DEBUG_LL_INCLUDE
default "debug/icedcc.S" if DEBUG_ICEDCC
default "debug/imx.S" if DEBUG_IMX1_UART || \
DEBUG_IMX25_UART || \
- DEBUG_IMX21_IMX27_UART || \
+ DEBUG_IMX27_UART || \
DEBUG_IMX31_UART || \
DEBUG_IMX35_UART || \
DEBUG_IMX50_UART || \
DEBUG_IMX51_UART || \
- DEBUG_IMX53_UART ||\
+ DEBUG_IMX53_UART || \
DEBUG_IMX6Q_UART || \
DEBUG_IMX6SL_UART || \
DEBUG_IMX6SX_UART || \
diff --git a/arch/arm/include/debug/imx-uart.h b/arch/arm/include/debug/imx-uart.h
index c8eb83d4b8964..3edbb3c5b42bf 100644
--- a/arch/arm/include/debug/imx-uart.h
+++ b/arch/arm/include/debug/imx-uart.h
@@ -11,13 +11,6 @@
#define IMX1_UART_BASE_ADDR(n) IMX1_UART##n##_BASE_ADDR
#define IMX1_UART_BASE(n) IMX1_UART_BASE_ADDR(n)
-#define IMX21_UART1_BASE_ADDR 0x1000a000
-#define IMX21_UART2_BASE_ADDR 0x1000b000
-#define IMX21_UART3_BASE_ADDR 0x1000c000
-#define IMX21_UART4_BASE_ADDR 0x1000d000
-#define IMX21_UART_BASE_ADDR(n) IMX21_UART##n##_BASE_ADDR
-#define IMX21_UART_BASE(n) IMX21_UART_BASE_ADDR(n)
-
#define IMX25_UART1_BASE_ADDR 0x43f90000
#define IMX25_UART2_BASE_ADDR 0x43f94000
#define IMX25_UART3_BASE_ADDR 0x5000c000
@@ -26,6 +19,13 @@
#define IMX25_UART_BASE_ADDR(n) IMX25_UART##n##_BASE_ADDR
#define IMX25_UART_BASE(n) IMX25_UART_BASE_ADDR(n)
+#define IMX27_UART1_BASE_ADDR 0x1000a000
+#define IMX27_UART2_BASE_ADDR 0x1000b000
+#define IMX27_UART3_BASE_ADDR 0x1000c000
+#define IMX27_UART4_BASE_ADDR 0x1000d000
+#define IMX27_UART_BASE_ADDR(n) IMX27_UART##n##_BASE_ADDR
+#define IMX27_UART_BASE(n) IMX27_UART_BASE_ADDR(n)
+
#define IMX31_UART1_BASE_ADDR 0x43f90000
#define IMX31_UART2_BASE_ADDR 0x43f94000
#define IMX31_UART3_BASE_ADDR 0x5000c000
@@ -112,10 +112,10 @@
#ifdef CONFIG_DEBUG_IMX1_UART
#define UART_PADDR IMX_DEBUG_UART_BASE(IMX1)
-#elif defined(CONFIG_DEBUG_IMX21_IMX27_UART)
-#define UART_PADDR IMX_DEBUG_UART_BASE(IMX21)
#elif defined(CONFIG_DEBUG_IMX25_UART)
#define UART_PADDR IMX_DEBUG_UART_BASE(IMX25)
+#elif defined(CONFIG_DEBUG_IMX27_UART)
+#define UART_PADDR IMX_DEBUG_UART_BASE(IMX27)
#elif defined(CONFIG_DEBUG_IMX31_UART)
#define UART_PADDR IMX_DEBUG_UART_BASE(IMX31)
#elif defined(CONFIG_DEBUG_IMX35_UART)
--
2.34.1
From: Rafael J. Wysocki <[email protected]>
[ Upstream commit 24ea5f90ec9548044a6209685c5010edd66ffe8f ]
ACPICA commit d984f12041392fa4156b52e2f7e5c5e7bc38ad9e
If Operand[0] is a reference of the ACPI_REFCLASS_REFOF class,
acpi_ex_opcode_1A_0T_1R () calls acpi_ns_get_attached_object () to
obtain return_desc which may require additional resolution with
the help of acpi_ex_read_data_from_field (). If the latter fails,
the reference counter of the original return_desc is decremented
which is incorrect, because acpi_ns_get_attached_object () does not
increment the reference counter of the object returned by it.
This issue may lead to premature deletion of the attached object
while it is still attached and a use-after-free and crash in the
host OS. For example, this may happen when on evaluation of ref_of()
a local region field where there is no registered handler for the
given Operation Region.
Fix it by making acpi_ex_opcode_1A_0T_1R () return Status right away
after a acpi_ex_read_data_from_field () failure.
Link: https://github.com/acpica/acpica/commit/d984f120
Link: https://github.com/acpica/acpica/pull/685
Reported-by: Lenny Szubowicz <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Bob Moore <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/acpi/acpica/exoparg1.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/acpi/acpica/exoparg1.c b/drivers/acpi/acpica/exoparg1.c
index a46d685a3ffcf..9d67dfd93d5b6 100644
--- a/drivers/acpi/acpica/exoparg1.c
+++ b/drivers/acpi/acpica/exoparg1.c
@@ -1007,7 +1007,8 @@ acpi_status acpi_ex_opcode_1A_0T_1R(struct acpi_walk_state *walk_state)
(walk_state, return_desc,
&temp_desc);
if (ACPI_FAILURE(status)) {
- goto cleanup;
+ return_ACPI_STATUS
+ (status);
}
return_desc = temp_desc;
--
2.34.1
From: Po-Hao Huang <[email protected]>
[ Upstream commit c1afb26727d9e507d3e17a9890e7aaf7fc85cd55 ]
These settings enables mac to detect and recover when rx fifo
circuit deadlock occurs. Previous version missed this, so we fix it.
Signed-off-by: Po-Hao Huang <[email protected]>
Signed-off-by: Ping-Ke Shih <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/realtek/rtw88/main.c | 2 +-
drivers/net/wireless/realtek/rtw88/rtw8821c.h | 2 +-
drivers/net/wireless/realtek/rtw88/rtw8822b.c | 2 +-
drivers/net/wireless/realtek/rtw88/rtw8822c.c | 2 +-
4 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtw88/main.c b/drivers/net/wireless/realtek/rtw88/main.c
index 565efd8806247..2ef1416899f03 100644
--- a/drivers/net/wireless/realtek/rtw88/main.c
+++ b/drivers/net/wireless/realtek/rtw88/main.c
@@ -1652,7 +1652,7 @@ int rtw_core_init(struct rtw_dev *rtwdev)
/* default rx filter setting */
rtwdev->hal.rcr = BIT_APP_FCS | BIT_APP_MIC | BIT_APP_ICV |
- BIT_HTC_LOC_CTRL | BIT_APP_PHYSTS |
+ BIT_PKTCTL_DLEN | BIT_HTC_LOC_CTRL | BIT_APP_PHYSTS |
BIT_AB | BIT_AM | BIT_APM;
ret = rtw_load_firmware(rtwdev, RTW_NORMAL_FW);
diff --git a/drivers/net/wireless/realtek/rtw88/rtw8821c.h b/drivers/net/wireless/realtek/rtw88/rtw8821c.h
index bd01e82b6bcd0..8d1e8ff71d7ef 100644
--- a/drivers/net/wireless/realtek/rtw88/rtw8821c.h
+++ b/drivers/net/wireless/realtek/rtw88/rtw8821c.h
@@ -131,7 +131,7 @@ _rtw_write32s_mask(struct rtw_dev *rtwdev, u32 addr, u32 mask, u32 data)
#define WLAN_TX_FUNC_CFG2 0x30
#define WLAN_MAC_OPT_NORM_FUNC1 0x98
#define WLAN_MAC_OPT_LB_FUNC1 0x80
-#define WLAN_MAC_OPT_FUNC2 0x30810041
+#define WLAN_MAC_OPT_FUNC2 0xb0810041
#define WLAN_SIFS_CFG (WLAN_SIFS_CCK_CONT_TX | \
(WLAN_SIFS_OFDM_CONT_TX << BIT_SHIFT_SIFS_OFDM_CTX) | \
diff --git a/drivers/net/wireless/realtek/rtw88/rtw8822b.c b/drivers/net/wireless/realtek/rtw88/rtw8822b.c
index 22d0dd640ac94..dbfd67c3f598c 100644
--- a/drivers/net/wireless/realtek/rtw88/rtw8822b.c
+++ b/drivers/net/wireless/realtek/rtw88/rtw8822b.c
@@ -204,7 +204,7 @@ static void rtw8822b_phy_set_param(struct rtw_dev *rtwdev)
#define WLAN_TX_FUNC_CFG2 0x30
#define WLAN_MAC_OPT_NORM_FUNC1 0x98
#define WLAN_MAC_OPT_LB_FUNC1 0x80
-#define WLAN_MAC_OPT_FUNC2 0x30810041
+#define WLAN_MAC_OPT_FUNC2 0xb0810041
#define WLAN_SIFS_CFG (WLAN_SIFS_CCK_CONT_TX | \
(WLAN_SIFS_OFDM_CONT_TX << BIT_SHIFT_SIFS_OFDM_CTX) | \
diff --git a/drivers/net/wireless/realtek/rtw88/rtw8822c.c b/drivers/net/wireless/realtek/rtw88/rtw8822c.c
index 79ad6232dce83..cee586335552d 100644
--- a/drivers/net/wireless/realtek/rtw88/rtw8822c.c
+++ b/drivers/net/wireless/realtek/rtw88/rtw8822c.c
@@ -1248,7 +1248,7 @@ static void rtw8822c_phy_set_param(struct rtw_dev *rtwdev)
#define WLAN_TX_FUNC_CFG2 0x30
#define WLAN_MAC_OPT_NORM_FUNC1 0x98
#define WLAN_MAC_OPT_LB_FUNC1 0x80
-#define WLAN_MAC_OPT_FUNC2 0x30810041
+#define WLAN_MAC_OPT_FUNC2 0xb0810041
#define WLAN_MAC_INT_MIG_CFG 0x33330000
#define WLAN_SIFS_CFG (WLAN_SIFS_CCK_CONT_TX | \
--
2.34.1
From: Zekun Shen <[email protected]>
[ Upstream commit f1cb3476e48b60c450ec3a1d7da0805bffc6e43a ]
rsi_get_* functions rely on an offset variable from usb
input. The size of usb input is RSI_MAX_RX_USB_PKT_SIZE(3000),
while 2-byte offset can be up to 0xFFFF. Thus a large offset
can cause out-of-bounds read.
The patch adds a bound checking condition when rcv_pkt_len is 0,
indicating it's USB. It's unclear whether this is triggerable
from other type of bus. The following check might help in that case.
offset > rcv_pkt_len - FRAME_DESC_SZ
The bug is trigerrable with conpromised/malfunctioning USB devices.
I tested the patch with the crashing input and got no more bug report.
Attached is the KASAN report from fuzzing.
BUG: KASAN: slab-out-of-bounds in rsi_read_pkt+0x42e/0x500 [rsi_91x]
Read of size 2 at addr ffff888019439fdb by task RX-Thread/227
CPU: 0 PID: 227 Comm: RX-Thread Not tainted 5.6.0 #66
Call Trace:
dump_stack+0x76/0xa0
print_address_description.constprop.0+0x16/0x200
? rsi_read_pkt+0x42e/0x500 [rsi_91x]
? rsi_read_pkt+0x42e/0x500 [rsi_91x]
__kasan_report.cold+0x37/0x7c
? rsi_read_pkt+0x42e/0x500 [rsi_91x]
kasan_report+0xe/0x20
rsi_read_pkt+0x42e/0x500 [rsi_91x]
rsi_usb_rx_thread+0x1b1/0x2fc [rsi_usb]
? rsi_probe+0x16a0/0x16a0 [rsi_usb]
? _raw_spin_lock_irqsave+0x7b/0xd0
? _raw_spin_trylock_bh+0x120/0x120
? __wake_up_common+0x10b/0x520
? rsi_probe+0x16a0/0x16a0 [rsi_usb]
kthread+0x2b5/0x3b0
? kthread_create_on_node+0xd0/0xd0
ret_from_fork+0x22/0x40
Reported-by: Brendan Dolan-Gavitt <[email protected]>
Signed-off-by: Zekun Shen <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/rsi/rsi_91x_main.c | 4 ++++
drivers/net/wireless/rsi/rsi_91x_usb.c | 1 -
drivers/net/wireless/rsi/rsi_usb.h | 2 ++
3 files changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/rsi/rsi_91x_main.c b/drivers/net/wireless/rsi/rsi_91x_main.c
index 8c638cfeac52f..fe8aed58ac088 100644
--- a/drivers/net/wireless/rsi/rsi_91x_main.c
+++ b/drivers/net/wireless/rsi/rsi_91x_main.c
@@ -23,6 +23,7 @@
#include "rsi_common.h"
#include "rsi_coex.h"
#include "rsi_hal.h"
+#include "rsi_usb.h"
u32 rsi_zone_enabled = /* INFO_ZONE |
INIT_ZONE |
@@ -168,6 +169,9 @@ int rsi_read_pkt(struct rsi_common *common, u8 *rx_pkt, s32 rcv_pkt_len)
frame_desc = &rx_pkt[index];
actual_length = *(u16 *)&frame_desc[0];
offset = *(u16 *)&frame_desc[2];
+ if (!rcv_pkt_len && offset >
+ RSI_MAX_RX_USB_PKT_SIZE - FRAME_DESC_SZ)
+ goto fail;
queueno = rsi_get_queueno(frame_desc, offset);
length = rsi_get_length(frame_desc, offset);
diff --git a/drivers/net/wireless/rsi/rsi_91x_usb.c b/drivers/net/wireless/rsi/rsi_91x_usb.c
index 7f34148c7dfe5..11388a1469621 100644
--- a/drivers/net/wireless/rsi/rsi_91x_usb.c
+++ b/drivers/net/wireless/rsi/rsi_91x_usb.c
@@ -328,7 +328,6 @@ static int rsi_rx_urb_submit(struct rsi_hw *adapter, u8 ep_num, gfp_t mem_flags)
struct sk_buff *skb;
u8 dword_align_bytes = 0;
-#define RSI_MAX_RX_USB_PKT_SIZE 3000
skb = dev_alloc_skb(RSI_MAX_RX_USB_PKT_SIZE);
if (!skb)
return -ENOMEM;
diff --git a/drivers/net/wireless/rsi/rsi_usb.h b/drivers/net/wireless/rsi/rsi_usb.h
index 8702f434b5699..ad88f8c70a351 100644
--- a/drivers/net/wireless/rsi/rsi_usb.h
+++ b/drivers/net/wireless/rsi/rsi_usb.h
@@ -44,6 +44,8 @@
#define RSI_USB_BUF_SIZE 4096
#define RSI_USB_CTRL_BUF_SIZE 0x04
+#define RSI_MAX_RX_USB_PKT_SIZE 3000
+
struct rx_usb_ctrl_block {
u8 *data;
struct urb *rx_urb;
--
2.34.1
From: Sudeep Holla <[email protected]>
[ Upstream commit 9a3b8655db1ada31c82189ae13f40eb25da48c35 ]
ACPICA commit 41be6afacfdaec2dba3a5ed368736babc2a7aa5c
With the PCC Opregion in the firmware and we are hitting below kernel crash:
-->8
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010
Workqueue: pm pm_runtime_work
pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : __memcpy+0x54/0x260
lr : acpi_ex_write_data_to_field+0xb8/0x194
Call trace:
__memcpy+0x54/0x260
acpi_ex_store_object_to_node+0xa4/0x1d4
acpi_ex_store+0x44/0x164
acpi_ex_opcode_1A_1T_1R+0x25c/0x508
acpi_ds_exec_end_op+0x1b4/0x44c
acpi_ps_parse_loop+0x3a8/0x614
acpi_ps_parse_aml+0x90/0x2f4
acpi_ps_execute_method+0x11c/0x19c
acpi_ns_evaluate+0x1ec/0x2b0
acpi_evaluate_object+0x170/0x2b0
acpi_device_set_power+0x118/0x310
acpi_dev_suspend+0xd4/0x180
acpi_subsys_runtime_suspend+0x28/0x38
__rpm_callback+0x74/0x328
rpm_suspend+0x2d8/0x624
pm_runtime_work+0xa4/0xb8
process_one_work+0x194/0x25c
worker_thread+0x260/0x49c
kthread+0x14c/0x30c
ret_from_fork+0x10/0x20
Code: f9000006 f81f80a7 d65f03c0 361000c2 (b9400026)
---[ end trace 24d8a032fa77b68a ]---
The reason for the crash is that the PCC channel index passed via region.address
in acpi_ex_store_object_to_node is interpreted as the channel subtype
incorrectly.
Assuming the PCC op_region support is not used by any other type, let us
remove the subtype check as the AML has no access to the subtype information.
Once we remove it, the kernel crash disappears and correctly complains about
missing PCC Opregion handler.
ACPI Error: No handler for Region [PFRM] ((____ptrval____)) [PCC] (20210730/evregion-130)
ACPI Error: Region PCC (ID=10) has no handler (20210730/exfldio-261)
ACPI Error: Aborting method \_SB.ETH0._PS3 due to previous error (AE_NOT_EXIST) (20210730/psparse-531)
Link: https://github.com/acpica/acpica/commit/41be6afa
Signed-off-by: Sudeep Holla <[email protected]>
Signed-off-by: Bob Moore <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/acpi/acpica/exfield.c | 7 +------
1 file changed, 1 insertion(+), 6 deletions(-)
diff --git a/drivers/acpi/acpica/exfield.c b/drivers/acpi/acpica/exfield.c
index 3323a2ba6a313..b3230e511870a 100644
--- a/drivers/acpi/acpica/exfield.c
+++ b/drivers/acpi/acpica/exfield.c
@@ -326,12 +326,7 @@ acpi_ex_write_data_to_field(union acpi_operand_object *source_desc,
obj_desc->field.base_byte_offset,
source_desc->buffer.pointer, data_length);
- if ((obj_desc->field.region_obj->region.address ==
- PCC_MASTER_SUBSPACE
- && MASTER_SUBSPACE_COMMAND(obj_desc->field.
- base_byte_offset))
- || GENERIC_SUBSPACE_COMMAND(obj_desc->field.
- base_byte_offset)) {
+ if (MASTER_SUBSPACE_COMMAND(obj_desc->field.base_byte_offset)) {
/* Perform the write */
--
2.34.1
From: Changcheng Deng <[email protected]>
[ Upstream commit 92c550f9ffd2884bb5def52b5c0485a35e452784 ]
do_div() does a 64-by-32 division. Here the divisor is an unsigned long
which on some platforms is 64 bit wide. So use div64_ul instead of do_div
to avoid a possible truncation.
Reported-by: Zeal Robot <[email protected]>
Signed-off-by: Changcheng Deng <[email protected]>
Signed-off-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/soc/qcom/cpr.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/soc/qcom/cpr.c b/drivers/soc/qcom/cpr.c
index b24cc77d1889f..6298561bc29c9 100644
--- a/drivers/soc/qcom/cpr.c
+++ b/drivers/soc/qcom/cpr.c
@@ -1043,7 +1043,7 @@ static int cpr_interpolate(const struct corner *corner, int step_volt,
return corner->uV;
temp = f_diff * (uV_high - uV_low);
- do_div(temp, f_high - f_low);
+ temp = div64_ul(temp, f_high - f_low);
/*
* max_volt_scale has units of uV/MHz while freq values
--
2.34.1
From: Sean Young <[email protected]>
[ Upstream commit 8fede658e7ddb605bbd68ed38067ddb0af033db4 ]
Without this, some IR will be missing mid-stream and we might decode
something which never really occurred.
Signed-off-by: Sean Young <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/rc/igorplugusb.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/media/rc/igorplugusb.c b/drivers/media/rc/igorplugusb.c
index effaa5751d6c9..3e9988ee785f0 100644
--- a/drivers/media/rc/igorplugusb.c
+++ b/drivers/media/rc/igorplugusb.c
@@ -64,9 +64,11 @@ static void igorplugusb_irdata(struct igorplugusb *ir, unsigned len)
if (start >= len) {
dev_err(ir->dev, "receive overflow invalid: %u", overflow);
} else {
- if (overflow > 0)
+ if (overflow > 0) {
dev_warn(ir->dev, "receive overflow, at least %u lost",
overflow);
+ ir_raw_event_reset(ir->rc);
+ }
do {
rawir.duration = ir->buf_in[i] * 85;
--
2.34.1
From: Suresh Kumar <[email protected]>
[ Upstream commit fee32de284ac277ba434a2d59f8ce46528ff3946 ]
Currently "bond_should_notify_peers: slave ..." messages are printed whenever
"bond_should_notify_peers" function is called.
+++
Dec 12 12:33:26 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
Dec 12 12:33:26 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
Dec 12 12:33:26 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
Dec 12 12:33:26 node1 kernel: bond0: (slave enp0s25): Received LACPDU on port 1
Dec 12 12:33:26 node1 kernel: bond0: (slave enp0s25): Rx Machine: Port=1, Last State=6, Curr State=6
Dec 12 12:33:26 node1 kernel: bond0: (slave enp0s25): partner sync=1
Dec 12 12:33:26 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
Dec 12 12:33:26 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
Dec 12 12:33:26 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
...
Dec 12 12:33:30 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
Dec 12 12:33:30 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
Dec 12 12:33:30 node1 kernel: bond0: (slave enp4s3): Received LACPDU on port 2
Dec 12 12:33:30 node1 kernel: bond0: (slave enp4s3): Rx Machine: Port=2, Last State=6, Curr State=6
Dec 12 12:33:30 node1 kernel: bond0: (slave enp4s3): partner sync=1
Dec 12 12:33:30 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
Dec 12 12:33:30 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
Dec 12 12:33:30 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
+++
This is confusing and can also clutter up debug logs.
Print logs only when the peer notification happens.
Signed-off-by: Suresh Kumar <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/bonding/bond_main.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 645c7cabcbe4d..e2e6a69adab4b 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -1061,9 +1061,6 @@ static bool bond_should_notify_peers(struct bonding *bond)
slave = rcu_dereference(bond->curr_active_slave);
rcu_read_unlock();
- netdev_dbg(bond->dev, "bond_should_notify_peers: slave %s\n",
- slave ? slave->dev->name : "NULL");
-
if (!slave || !bond->send_peer_notif ||
bond->send_peer_notif %
max(1, bond->params.peer_notif_delay) != 0 ||
@@ -1071,6 +1068,9 @@ static bool bond_should_notify_peers(struct bonding *bond)
test_bit(__LINK_STATE_LINKWATCH_PENDING, &slave->dev->state))
return false;
+ netdev_dbg(bond->dev, "bond_should_notify_peers: slave %s\n",
+ slave ? slave->dev->name : "NULL");
+
return true;
}
--
2.34.1
From: Heiko Carstens <[email protected]>
[ Upstream commit e5992f373c6eed6d09e5858e9623df1259b3ce30 ]
Commit 32f6e5da83c7 ("selftests/ftrace: Add kprobe profile testcase")
added a new kprobes testcase, but has a description which does not
describe what the test case is doing and is duplicating the description
of another test case.
Therefore change the test case description, so it is unique and then
allows easily to tell which test case actually passed or failed.
Reported-by: Alexander Egorenkov <[email protected]>
Signed-off-by: Heiko Carstens <[email protected]>
Acked-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/ftrace/test.d/kprobe/profile.tc | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/testing/selftests/ftrace/test.d/kprobe/profile.tc b/tools/testing/selftests/ftrace/test.d/kprobe/profile.tc
index 98166fa3eb91c..34fb89b0c61fa 100644
--- a/tools/testing/selftests/ftrace/test.d/kprobe/profile.tc
+++ b/tools/testing/selftests/ftrace/test.d/kprobe/profile.tc
@@ -1,6 +1,6 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0
-# description: Kprobe dynamic event - adding and removing
+# description: Kprobe profile
# requires: kprobe_events
! grep -q 'myevent' kprobe_profile
--
2.34.1
From: Todd Kjos <[email protected]>
[ Upstream commit fe6b1869243f23a485a106c214bcfdc7aa0ed593 ]
If a memory copy function fails to copy the whole buffer,
a positive integar with the remaining bytes is returned.
In binder_translate_fd_array() this can result in an fd being
skipped due to the failed copy, but the loop continues
processing fds since the early return condition expects a
negative integer on error.
Fix by returning "ret > 0 ? -EINVAL : ret" to handle this case.
Fixes: bb4a2e48d510 ("binder: return errors from buffer copy functions")
Suggested-by: Dan Carpenter <[email protected]>
Acked-by: Christian Brauner <[email protected]>
Signed-off-by: Todd Kjos <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/android/binder.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/android/binder.c b/drivers/android/binder.c
index 80e2bbb36422e..366b124057081 100644
--- a/drivers/android/binder.c
+++ b/drivers/android/binder.c
@@ -2657,8 +2657,8 @@ static int binder_translate_fd_array(struct binder_fd_array_object *fda,
if (!ret)
ret = binder_translate_fd(fd, offset, t, thread,
in_reply_to);
- if (ret < 0)
- return ret;
+ if (ret)
+ return ret > 0 ? -EINVAL : ret;
}
return 0;
}
--
2.34.1
From: Konrad Dybcio <[email protected]>
[ Upstream commit 14e2976fbabdacb01335d7f91eeebbc89c67ddb1 ]
The RPMh regulator driver is much newer and gets more attention, which in
consequence makes it do a few things better. Update qcom_smd-regulator's
probe function to mimic what rpmh-regulator does to address a couple of
issues:
- Probe defer now works correctly, before it used to, well,
kinda just die.. This fixes reliable probing on (at least) PM8994,
because Linux apparently cannot deal with supply map dependencies yet..
- Regulator data is now matched more sanely: regulator data is matched
against each individual regulator node name and throwing an -EINVAL if
data is missing, instead of just assuming everything is fine and
iterating over all subsequent array members.
- status = "disabled" will now work for disabling individual regulators in
DT. Previously it didn't seem to do much if anything at all.
Signed-off-by: Konrad Dybcio <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/regulator/qcom_smd-regulator.c | 100 +++++++++++++++++--------
1 file changed, 70 insertions(+), 30 deletions(-)
diff --git a/drivers/regulator/qcom_smd-regulator.c b/drivers/regulator/qcom_smd-regulator.c
index bb944ee5fe3b1..03e146e98abd5 100644
--- a/drivers/regulator/qcom_smd-regulator.c
+++ b/drivers/regulator/qcom_smd-regulator.c
@@ -9,6 +9,7 @@
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
+#include <linux/regulator/of_regulator.h>
#include <linux/soc/qcom/smd-rpm.h>
struct qcom_rpm_reg {
@@ -1107,52 +1108,91 @@ static const struct of_device_id rpm_of_match[] = {
};
MODULE_DEVICE_TABLE(of, rpm_of_match);
-static int rpm_reg_probe(struct platform_device *pdev)
+/**
+ * rpm_regulator_init_vreg() - initialize all attributes of a qcom_smd-regulator
+ * @vreg: Pointer to the individual qcom_smd-regulator resource
+ * @dev: Pointer to the top level qcom_smd-regulator PMIC device
+ * @node: Pointer to the individual qcom_smd-regulator resource
+ * device node
+ * @rpm: Pointer to the rpm bus node
+ * @pmic_rpm_data: Pointer to a null-terminated array of qcom_smd-regulator
+ * resources defined for the top level PMIC device
+ *
+ * Return: 0 on success, errno on failure
+ */
+static int rpm_regulator_init_vreg(struct qcom_rpm_reg *vreg, struct device *dev,
+ struct device_node *node, struct qcom_smd_rpm *rpm,
+ const struct rpm_regulator_data *pmic_rpm_data)
{
- const struct rpm_regulator_data *reg;
- const struct of_device_id *match;
- struct regulator_config config = { };
+ struct regulator_config config = {};
+ const struct rpm_regulator_data *rpm_data;
struct regulator_dev *rdev;
+ int ret;
+
+ for (rpm_data = pmic_rpm_data; rpm_data->name; rpm_data++)
+ if (of_node_name_eq(node, rpm_data->name))
+ break;
+
+ if (!rpm_data->name) {
+ dev_err(dev, "Unknown regulator %pOFn\n", node);
+ return -EINVAL;
+ }
+
+ vreg->dev = dev;
+ vreg->rpm = rpm;
+ vreg->type = rpm_data->type;
+ vreg->id = rpm_data->id;
+
+ memcpy(&vreg->desc, rpm_data->desc, sizeof(vreg->desc));
+ vreg->desc.name = rpm_data->name;
+ vreg->desc.supply_name = rpm_data->supply;
+ vreg->desc.owner = THIS_MODULE;
+ vreg->desc.type = REGULATOR_VOLTAGE;
+ vreg->desc.of_match = rpm_data->name;
+
+ config.dev = dev;
+ config.of_node = node;
+ config.driver_data = vreg;
+
+ rdev = devm_regulator_register(dev, &vreg->desc, &config);
+ if (IS_ERR(rdev)) {
+ ret = PTR_ERR(rdev);
+ dev_err(dev, "%pOFn: devm_regulator_register() failed, ret=%d\n", node, ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int rpm_reg_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ const struct rpm_regulator_data *vreg_data;
+ struct device_node *node;
struct qcom_rpm_reg *vreg;
struct qcom_smd_rpm *rpm;
+ int ret;
rpm = dev_get_drvdata(pdev->dev.parent);
if (!rpm) {
- dev_err(&pdev->dev, "unable to retrieve handle to rpm\n");
+ dev_err(&pdev->dev, "Unable to retrieve handle to rpm\n");
return -ENODEV;
}
- match = of_match_device(rpm_of_match, &pdev->dev);
- if (!match) {
- dev_err(&pdev->dev, "failed to match device\n");
+ vreg_data = of_device_get_match_data(dev);
+ if (!vreg_data)
return -ENODEV;
- }
- for (reg = match->data; reg->name; reg++) {
+ for_each_available_child_of_node(dev->of_node, node) {
vreg = devm_kzalloc(&pdev->dev, sizeof(*vreg), GFP_KERNEL);
if (!vreg)
return -ENOMEM;
- vreg->dev = &pdev->dev;
- vreg->type = reg->type;
- vreg->id = reg->id;
- vreg->rpm = rpm;
-
- memcpy(&vreg->desc, reg->desc, sizeof(vreg->desc));
-
- vreg->desc.id = -1;
- vreg->desc.owner = THIS_MODULE;
- vreg->desc.type = REGULATOR_VOLTAGE;
- vreg->desc.name = reg->name;
- vreg->desc.supply_name = reg->supply;
- vreg->desc.of_match = reg->name;
-
- config.dev = &pdev->dev;
- config.driver_data = vreg;
- rdev = devm_regulator_register(&pdev->dev, &vreg->desc, &config);
- if (IS_ERR(rdev)) {
- dev_err(&pdev->dev, "failed to register %s\n", reg->name);
- return PTR_ERR(rdev);
+ ret = rpm_regulator_init_vreg(vreg, dev, node, rpm, vreg_data);
+
+ if (ret < 0) {
+ of_node_put(node);
+ return ret;
}
}
--
2.34.1
From: José Expósito <[email protected]>
[ Upstream commit 0a94131d6920916ccb6a357037c535533af08819 ]
The function performs a check on the hdev input parameters, however, it
is used before the check.
Initialize the udev variable after the sanity check to avoid a
possible NULL pointer dereference.
Fixes: 9614219e9310e ("HID: uclogic: Extract tablet parameter discovery into a module")
Addresses-Coverity-ID: 1443827 ("Null pointer dereference")
Signed-off-by: José Expósito <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hid/hid-uclogic-params.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/hid/hid-uclogic-params.c b/drivers/hid/hid-uclogic-params.c
index 851ab8e24f9d7..a751c9a49360f 100644
--- a/drivers/hid/hid-uclogic-params.c
+++ b/drivers/hid/hid-uclogic-params.c
@@ -65,7 +65,7 @@ static int uclogic_params_get_str_desc(__u8 **pbuf, struct hid_device *hdev,
__u8 idx, size_t len)
{
int rc;
- struct usb_device *udev = hid_to_usb_dev(hdev);
+ struct usb_device *udev;
__u8 *buf = NULL;
/* Check arguments */
@@ -74,6 +74,8 @@ static int uclogic_params_get_str_desc(__u8 **pbuf, struct hid_device *hdev,
goto cleanup;
}
+ udev = hid_to_usb_dev(hdev);
+
buf = kmalloc(len, GFP_KERNEL);
if (buf == NULL) {
rc = -ENOMEM;
--
2.34.1
From: Wei Yongjun <[email protected]>
[ Upstream commit 5a4bb6a8e981d3d0d492aa38412ee80b21033177 ]
Fault injection test report debugfs entry leak as follows:
debugfs: Directory 'hci0' with parent 'bluetooth' already present!
When register_pm_notifier() failed in hci_register_dev(), the debugfs
create by debugfs_create_dir() do not removed in the error handing path.
Add the remove debugfs code to fix it.
Signed-off-by: Wei Yongjun <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/bluetooth/hci_core.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index 2ad66f64879f1..2e7998bad133b 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -3810,6 +3810,7 @@ int hci_register_dev(struct hci_dev *hdev)
return id;
err_wqueue:
+ debugfs_remove_recursive(hdev->debugfs);
destroy_workqueue(hdev->workqueue);
destroy_workqueue(hdev->req_workqueue);
err:
--
2.34.1
From: Zekun Shen <[email protected]>
[ Upstream commit b07e3c6ebc0c20c772c0f54042e430acec2945c3 ]
When freeing rx_cb->rx_skb, the pointer is not set to NULL,
a later rsi_rx_done_handler call will try to read the freed
address.
This bug will very likley lead to double free, although
detected early as use-after-free bug.
The bug is triggerable with a compromised/malfunctional usb
device. After applying the patch, the same input no longer
triggers the use-after-free.
Attached is the kasan report from fuzzing.
BUG: KASAN: use-after-free in rsi_rx_done_handler+0x354/0x430 [rsi_usb]
Read of size 4 at addr ffff8880188e5930 by task modprobe/231
Call Trace:
<IRQ>
dump_stack+0x76/0xa0
print_address_description.constprop.0+0x16/0x200
? rsi_rx_done_handler+0x354/0x430 [rsi_usb]
? rsi_rx_done_handler+0x354/0x430 [rsi_usb]
__kasan_report.cold+0x37/0x7c
? dma_direct_unmap_page+0x90/0x110
? rsi_rx_done_handler+0x354/0x430 [rsi_usb]
kasan_report+0xe/0x20
rsi_rx_done_handler+0x354/0x430 [rsi_usb]
__usb_hcd_giveback_urb+0x1e4/0x380
usb_giveback_urb_bh+0x241/0x4f0
? __usb_hcd_giveback_urb+0x380/0x380
? apic_timer_interrupt+0xa/0x20
tasklet_action_common.isra.0+0x135/0x330
__do_softirq+0x18c/0x634
? handle_irq_event+0xcd/0x157
? handle_edge_irq+0x1eb/0x7b0
irq_exit+0x114/0x140
do_IRQ+0x91/0x1e0
common_interrupt+0xf/0xf
</IRQ>
Reported-by: Brendan Dolan-Gavitt <[email protected]>
Signed-off-by: Zekun Shen <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/YXxQL/vIiYcZUu/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/rsi/rsi_91x_usb.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/rsi/rsi_91x_usb.c b/drivers/net/wireless/rsi/rsi_91x_usb.c
index d881df9ebd0c3..7f34148c7dfe5 100644
--- a/drivers/net/wireless/rsi/rsi_91x_usb.c
+++ b/drivers/net/wireless/rsi/rsi_91x_usb.c
@@ -269,8 +269,12 @@ static void rsi_rx_done_handler(struct urb *urb)
struct rsi_91x_usbdev *dev = (struct rsi_91x_usbdev *)rx_cb->data;
int status = -EINVAL;
+ if (!rx_cb->rx_skb)
+ return;
+
if (urb->status) {
dev_kfree_skb(rx_cb->rx_skb);
+ rx_cb->rx_skb = NULL;
return;
}
@@ -294,8 +298,10 @@ out:
if (rsi_rx_urb_submit(dev->priv, rx_cb->ep_num, GFP_ATOMIC))
rsi_dbg(ERR_ZONE, "%s: Failed in urb submission", __func__);
- if (status)
+ if (status) {
dev_kfree_skb(rx_cb->rx_skb);
+ rx_cb->rx_skb = NULL;
+ }
}
static void rsi_rx_urb_kill(struct rsi_hw *adapter, u8 ep_num)
--
2.34.1
From: Avihai Horon <[email protected]>
[ Upstream commit 20679094a0161c94faf77e373fa3f7428a8e14bd ]
Currently, when cma_resolve_ib_dev() searches for a matching GID it will
stop searching after encountering the first empty GID table entry. This
behavior is wrong since neither IB nor RoCE spec enforce tightly packed
GID tables.
For example, when the matching valid GID entry exists at index N, and if a
GID entry is empty at index N-1, cma_resolve_ib_dev() will fail to find
the matching valid entry.
Fix it by making cma_resolve_ib_dev() continue searching even after
encountering missing entries.
Fixes: f17df3b0dede ("RDMA/cma: Add support for AF_IB to rdma_resolve_addr()")
Link: https://lore.kernel.org/r/b7346307e3bb396c43d67d924348c6c496493991.1639055490.git.leonro@nvidia.com
Signed-off-by: Avihai Horon <[email protected]>
Reviewed-by: Mark Zhang <[email protected]>
Signed-off-by: Leon Romanovsky <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/core/cma.c | 12 +++++++++---
1 file changed, 9 insertions(+), 3 deletions(-)
diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c
index 8e54184566f7f..4d4ba09f6cf93 100644
--- a/drivers/infiniband/core/cma.c
+++ b/drivers/infiniband/core/cma.c
@@ -775,6 +775,7 @@ static int cma_resolve_ib_dev(struct rdma_id_private *id_priv)
unsigned int p;
u16 pkey, index;
enum ib_port_state port_state;
+ int ret;
int i;
cma_dev = NULL;
@@ -793,9 +794,14 @@ static int cma_resolve_ib_dev(struct rdma_id_private *id_priv)
if (ib_get_cached_port_state(cur_dev->device, p, &port_state))
continue;
- for (i = 0; !rdma_query_gid(cur_dev->device,
- p, i, &gid);
- i++) {
+
+ for (i = 0; i < cur_dev->device->port_data[p].immutable.gid_tbl_len;
+ ++i) {
+ ret = rdma_query_gid(cur_dev->device, p, i,
+ &gid);
+ if (ret)
+ continue;
+
if (!memcmp(&gid, dgid, sizeof(gid))) {
cma_dev = cur_dev;
sgid = gid;
--
2.34.1
From: Sameer Pujar <[email protected]>
[ Upstream commit 146b3a77af8091cabbd1decc51d67799e69682d2 ]
Tegra194 does not really have "hda2codec_2x" related reset. Hence drop
this entry to reflect actual HW.
Fixes: 4878cc0c9fab ("arm64: tegra: Add HDA controller on Tegra194")
Signed-off-by: Sameer Pujar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/nvidia/tegra194.dtsi | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
index 815df654e6387..05cf606b85c9f 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
@@ -786,9 +786,8 @@
<&bpmp TEGRA194_CLK_HDA2CODEC_2X>;
clock-names = "hda", "hda2hdmi", "hda2codec_2x";
resets = <&bpmp TEGRA194_RESET_HDA>,
- <&bpmp TEGRA194_RESET_HDA2HDMICODEC>,
- <&bpmp TEGRA194_RESET_HDA2CODEC_2X>;
- reset-names = "hda", "hda2hdmi", "hda2codec_2x";
+ <&bpmp TEGRA194_RESET_HDA2HDMICODEC>;
+ reset-names = "hda", "hda2hdmi";
power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISP>;
interconnects = <&mc TEGRA194_MEMORY_CLIENT_HDAR &emc>,
<&mc TEGRA194_MEMORY_CLIENT_HDAW &emc>;
--
2.34.1
From: Ingo Molnar <[email protected]>
[ Upstream commit b6aa86cff44cf099299d3a5e66348cb709cd7964 ]
Most distro kernels have this option enabled, to improve debug output.
Lockdep also selects it.
Enable this in the defconfig kernel as well, to make it more
representative of what people are using on x86.
Signed-off-by: Ingo Molnar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/configs/i386_defconfig | 1 +
arch/x86/configs/x86_64_defconfig | 1 +
2 files changed, 2 insertions(+)
diff --git a/arch/x86/configs/i386_defconfig b/arch/x86/configs/i386_defconfig
index 78210793d357c..38d7acb9610cc 100644
--- a/arch/x86/configs/i386_defconfig
+++ b/arch/x86/configs/i386_defconfig
@@ -264,3 +264,4 @@ CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
CONFIG_EARLY_PRINTK_DBGP=y
CONFIG_DEBUG_BOOT_PARAMS=y
+CONFIG_KALLSYMS_ALL=y
diff --git a/arch/x86/configs/x86_64_defconfig b/arch/x86/configs/x86_64_defconfig
index 9936528e19393..c6e587a9a6f85 100644
--- a/arch/x86/configs/x86_64_defconfig
+++ b/arch/x86/configs/x86_64_defconfig
@@ -260,3 +260,4 @@ CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
CONFIG_EARLY_PRINTK_DBGP=y
CONFIG_DEBUG_BOOT_PARAMS=y
+CONFIG_KALLSYMS_ALL=y
--
2.34.1
From: Zekun Shen <[email protected]>
[ Upstream commit ae80b6033834342601e99f74f6a62ff5092b1cee ]
Unexpected WDCMSG_TARGET_START replay can lead to null-ptr-deref
when ar->tx_cmd->odata is NULL. The patch adds a null check to
prevent such case.
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
ar5523_cmd+0x46a/0x581 [ar5523]
ar5523_probe.cold+0x1b7/0x18da [ar5523]
? ar5523_cmd_rx_cb+0x7a0/0x7a0 [ar5523]
? __pm_runtime_set_status+0x54a/0x8f0
? _raw_spin_trylock_bh+0x120/0x120
? pm_runtime_barrier+0x220/0x220
? __pm_runtime_resume+0xb1/0xf0
usb_probe_interface+0x25b/0x710
really_probe+0x209/0x5d0
driver_probe_device+0xc6/0x1b0
device_driver_attach+0xe2/0x120
I found the bug using a custome USBFuzz port. It's a research work
to fuzz USB stack/drivers. I modified it to fuzz ath9k driver only,
providing hand-crafted usb descriptors to QEMU.
After fixing the code (fourth byte in usb packet) to WDCMSG_TARGET_START,
I got the null-ptr-deref bug. I believe the bug is triggerable whenever
cmd->odata is NULL. After patching, I tested with the same input and no
longer see the KASAN report.
This was NOT tested on a real device.
Signed-off-by: Zekun Shen <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/ar5523/ar5523.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/net/wireless/ath/ar5523/ar5523.c b/drivers/net/wireless/ath/ar5523/ar5523.c
index 49cc4b7ed5163..1baec4b412c8d 100644
--- a/drivers/net/wireless/ath/ar5523/ar5523.c
+++ b/drivers/net/wireless/ath/ar5523/ar5523.c
@@ -153,6 +153,10 @@ static void ar5523_cmd_rx_cb(struct urb *urb)
ar5523_err(ar, "Invalid reply to WDCMSG_TARGET_START");
return;
}
+ if (!cmd->odata) {
+ ar5523_err(ar, "Unexpected WDCMSG_TARGET_START reply");
+ return;
+ }
memcpy(cmd->odata, hdr + 1, sizeof(u32));
cmd->olen = sizeof(u32);
cmd->res = 0;
--
2.34.1
From: Antony Antony <[email protected]>
[ Upstream commit 4e484b3e969b52effd95c17f7a86f39208b2ccf4 ]
Kernel generates mapping change message, XFRM_MSG_MAPPING,
when a source port chage is detected on a input state with UDP
encapsulation set. Kernel generates a message for each IPsec packet
with new source port. For a high speed flow per packet mapping change
message can be excessive, and can overload the user space listener.
Introduce rate limiting for XFRM_MSG_MAPPING message to the user space.
The rate limiting is configurable via netlink, when adding a new SA or
updating it. Use the new attribute XFRMA_MTIMER_THRESH in seconds.
v1->v2 change:
update xfrm_sa_len()
v2->v3 changes:
use u32 insted unsigned long to reduce size of struct xfrm_state
fix xfrm_ompat size Reported-by: kernel test robot <[email protected]>
accept XFRM_MSG_MAPPING only when XFRMA_ENCAP is present
Co-developed-by: Thomas Egerer <[email protected]>
Signed-off-by: Thomas Egerer <[email protected]>
Signed-off-by: Antony Antony <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/net/xfrm.h | 5 +++++
include/uapi/linux/xfrm.h | 1 +
net/xfrm/xfrm_compat.c | 6 ++++--
net/xfrm/xfrm_state.c | 23 ++++++++++++++++++++++-
net/xfrm/xfrm_user.c | 18 +++++++++++++++++-
5 files changed, 49 insertions(+), 4 deletions(-)
diff --git a/include/net/xfrm.h b/include/net/xfrm.h
index 6232a5f048bde..337d29875e518 100644
--- a/include/net/xfrm.h
+++ b/include/net/xfrm.h
@@ -193,6 +193,11 @@ struct xfrm_state {
struct xfrm_algo_aead *aead;
const char *geniv;
+ /* mapping change rate limiting */
+ __be16 new_mapping_sport;
+ u32 new_mapping; /* seconds */
+ u32 mapping_maxage; /* seconds for input SA */
+
/* Data for encapsulator */
struct xfrm_encap_tmpl *encap;
struct sock __rcu *encap_sk;
diff --git a/include/uapi/linux/xfrm.h b/include/uapi/linux/xfrm.h
index ffc6a5391bb7b..2290c98b47cf8 100644
--- a/include/uapi/linux/xfrm.h
+++ b/include/uapi/linux/xfrm.h
@@ -308,6 +308,7 @@ enum xfrm_attr_type_t {
XFRMA_SET_MARK, /* __u32 */
XFRMA_SET_MARK_MASK, /* __u32 */
XFRMA_IF_ID, /* __u32 */
+ XFRMA_MTIMER_THRESH, /* __u32 in seconds for input SA */
__XFRMA_MAX
#define XFRMA_OUTPUT_MARK XFRMA_SET_MARK /* Compatibility */
diff --git a/net/xfrm/xfrm_compat.c b/net/xfrm/xfrm_compat.c
index 2bf2693901631..a0f62fa02e06e 100644
--- a/net/xfrm/xfrm_compat.c
+++ b/net/xfrm/xfrm_compat.c
@@ -127,6 +127,7 @@ static const struct nla_policy compat_policy[XFRMA_MAX+1] = {
[XFRMA_SET_MARK] = { .type = NLA_U32 },
[XFRMA_SET_MARK_MASK] = { .type = NLA_U32 },
[XFRMA_IF_ID] = { .type = NLA_U32 },
+ [XFRMA_MTIMER_THRESH] = { .type = NLA_U32 },
};
static struct nlmsghdr *xfrm_nlmsg_put_compat(struct sk_buff *skb,
@@ -274,9 +275,10 @@ static int xfrm_xlate64_attr(struct sk_buff *dst, const struct nlattr *src)
case XFRMA_SET_MARK:
case XFRMA_SET_MARK_MASK:
case XFRMA_IF_ID:
+ case XFRMA_MTIMER_THRESH:
return xfrm_nla_cpy(dst, src, nla_len(src));
default:
- BUILD_BUG_ON(XFRMA_MAX != XFRMA_IF_ID);
+ BUILD_BUG_ON(XFRMA_MAX != XFRMA_MTIMER_THRESH);
pr_warn_once("unsupported nla_type %d\n", src->nla_type);
return -EOPNOTSUPP;
}
@@ -431,7 +433,7 @@ static int xfrm_xlate32_attr(void *dst, const struct nlattr *nla,
int err;
if (type > XFRMA_MAX) {
- BUILD_BUG_ON(XFRMA_MAX != XFRMA_IF_ID);
+ BUILD_BUG_ON(XFRMA_MAX != XFRMA_MTIMER_THRESH);
NL_SET_ERR_MSG(extack, "Bad attribute");
return -EOPNOTSUPP;
}
diff --git a/net/xfrm/xfrm_state.c b/net/xfrm/xfrm_state.c
index c158e70e8ae10..65e2805fa113a 100644
--- a/net/xfrm/xfrm_state.c
+++ b/net/xfrm/xfrm_state.c
@@ -1557,6 +1557,9 @@ static struct xfrm_state *xfrm_state_clone(struct xfrm_state *orig,
x->km.seq = orig->km.seq;
x->replay = orig->replay;
x->preplay = orig->preplay;
+ x->mapping_maxage = orig->mapping_maxage;
+ x->new_mapping = 0;
+ x->new_mapping_sport = 0;
return x;
@@ -2208,7 +2211,7 @@ int km_query(struct xfrm_state *x, struct xfrm_tmpl *t, struct xfrm_policy *pol)
}
EXPORT_SYMBOL(km_query);
-int km_new_mapping(struct xfrm_state *x, xfrm_address_t *ipaddr, __be16 sport)
+static int __km_new_mapping(struct xfrm_state *x, xfrm_address_t *ipaddr, __be16 sport)
{
int err = -EINVAL;
struct xfrm_mgr *km;
@@ -2223,6 +2226,24 @@ int km_new_mapping(struct xfrm_state *x, xfrm_address_t *ipaddr, __be16 sport)
rcu_read_unlock();
return err;
}
+
+int km_new_mapping(struct xfrm_state *x, xfrm_address_t *ipaddr, __be16 sport)
+{
+ int ret = 0;
+
+ if (x->mapping_maxage) {
+ if ((jiffies / HZ - x->new_mapping) > x->mapping_maxage ||
+ x->new_mapping_sport != sport) {
+ x->new_mapping_sport = sport;
+ x->new_mapping = jiffies / HZ;
+ ret = __km_new_mapping(x, ipaddr, sport);
+ }
+ } else {
+ ret = __km_new_mapping(x, ipaddr, sport);
+ }
+
+ return ret;
+}
EXPORT_SYMBOL(km_new_mapping);
void km_policy_expired(struct xfrm_policy *pol, int dir, int hard, u32 portid)
diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c
index ddf1b3a5f7c1f..d0fdfbf4c5f72 100644
--- a/net/xfrm/xfrm_user.c
+++ b/net/xfrm/xfrm_user.c
@@ -282,6 +282,10 @@ static int verify_newsa_info(struct xfrm_usersa_info *p,
err = 0;
+ if (attrs[XFRMA_MTIMER_THRESH])
+ if (!attrs[XFRMA_ENCAP])
+ err = -EINVAL;
+
out:
return err;
}
@@ -521,6 +525,7 @@ static void xfrm_update_ae_params(struct xfrm_state *x, struct nlattr **attrs,
struct nlattr *lt = attrs[XFRMA_LTIME_VAL];
struct nlattr *et = attrs[XFRMA_ETIMER_THRESH];
struct nlattr *rt = attrs[XFRMA_REPLAY_THRESH];
+ struct nlattr *mt = attrs[XFRMA_MTIMER_THRESH];
if (re) {
struct xfrm_replay_state_esn *replay_esn;
@@ -552,6 +557,9 @@ static void xfrm_update_ae_params(struct xfrm_state *x, struct nlattr **attrs,
if (rt)
x->replay_maxdiff = nla_get_u32(rt);
+
+ if (mt)
+ x->mapping_maxage = nla_get_u32(mt);
}
static void xfrm_smark_init(struct nlattr **attrs, struct xfrm_mark *m)
@@ -969,8 +977,13 @@ static int copy_to_user_state_extra(struct xfrm_state *x,
if (ret)
goto out;
}
- if (x->security)
+ if (x->security) {
ret = copy_sec_ctx(x->security, skb);
+ if (ret)
+ goto out;
+ }
+ if (x->mapping_maxage)
+ ret = nla_put_u32(skb, XFRMA_MTIMER_THRESH, x->mapping_maxage);
out:
return ret;
}
@@ -2924,6 +2937,9 @@ static inline unsigned int xfrm_sa_len(struct xfrm_state *x)
/* Must count x->lastused as it may become non-zero behind our back. */
l += nla_total_size_64bit(sizeof(u64));
+ if (x->mapping_maxage)
+ l += nla_total_size(sizeof(x->mapping_maxage));
+
return l;
}
--
2.34.1
From: Alexey Kardashevskiy <[email protected]>
[ Upstream commit 792020907b11c6f9246c21977cab3bad985ae4b6 ]
H_COPY_TOFROM_GUEST is an hcall for an upper level VM to access its nested
VMs memory. The userspace can trigger WARN_ON_ONCE(!(gfp & __GFP_NOWARN))
in __alloc_pages() by constructing a tiny VM which only does
H_COPY_TOFROM_GUEST with a too big GPR9 (number of bytes to copy).
This silences the warning by adding __GFP_NOWARN.
Spotted by syzkaller.
Signed-off-by: Alexey Kardashevskiy <[email protected]>
Reviewed-by: Fabiano Rosas <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/kvm/book3s_hv_nested.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/powerpc/kvm/book3s_hv_nested.c b/arch/powerpc/kvm/book3s_hv_nested.c
index a5f1ae892ba68..d0b6c8c16c48a 100644
--- a/arch/powerpc/kvm/book3s_hv_nested.c
+++ b/arch/powerpc/kvm/book3s_hv_nested.c
@@ -510,7 +510,7 @@ long kvmhv_copy_tofrom_guest_nested(struct kvm_vcpu *vcpu)
if (eaddr & (0xFFFUL << 52))
return H_PARAMETER;
- buf = kzalloc(n, GFP_KERNEL);
+ buf = kzalloc(n, GFP_KERNEL | __GFP_NOWARN);
if (!buf)
return H_NO_MEM;
--
2.34.1
From: Nathan Chancellor <[email protected]>
[ Upstream commit f2c6c22fa83ab2577619009057b3ebcb5305bb03 ]
LLVM's integrated assembler does not support 'slti <reg>, <imm>':
<instantiation>:16:12: error: invalid operand for instruction
slti $12, (0x6300 | 0x0008)
^
arch/mips/kernel/head.S:86:2: note: while in macro instantiation
kernel_entry_setup # cpu specific setup
^
<instantiation>:16:12: error: invalid operand for instruction
slti $12, (0x6300 | 0x0008)
^
arch/mips/kernel/head.S:150:2: note: while in macro instantiation
smp_slave_setup
^
To increase compatibility with LLVM's integrated assembler, use the full
form of 'slti <reg>, <reg>, <imm>', which matches the rest of
arch/mips/. This does not result in any change for GNU as.
Link: https://github.com/ClangBuiltLinux/linux/issues/1526
Reported-by: Ryutaroh Matsumoto <[email protected]>
Signed-off-by: Nathan Chancellor <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/mips/include/asm/mach-loongson64/kernel-entry-init.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/mips/include/asm/mach-loongson64/kernel-entry-init.h b/arch/mips/include/asm/mach-loongson64/kernel-entry-init.h
index 87a5bfbf8cfe9..28572ddfb004a 100644
--- a/arch/mips/include/asm/mach-loongson64/kernel-entry-init.h
+++ b/arch/mips/include/asm/mach-loongson64/kernel-entry-init.h
@@ -36,7 +36,7 @@
nop
/* Loongson-3A R2/R3 */
andi t0, (PRID_IMP_MASK | PRID_REV_MASK)
- slti t0, (PRID_IMP_LOONGSON_64C | PRID_REV_LOONGSON3A_R2_0)
+ slti t0, t0, (PRID_IMP_LOONGSON_64C | PRID_REV_LOONGSON3A_R2_0)
bnez t0, 2f
nop
1:
@@ -71,7 +71,7 @@
nop
/* Loongson-3A R2/R3 */
andi t0, (PRID_IMP_MASK | PRID_REV_MASK)
- slti t0, (PRID_IMP_LOONGSON_64C | PRID_REV_LOONGSON3A_R2_0)
+ slti t0, t0, (PRID_IMP_LOONGSON_64C | PRID_REV_LOONGSON3A_R2_0)
bnez t0, 2f
nop
1:
--
2.34.1
From: Tzung-Bi Shih <[email protected]>
[ Upstream commit 493433785df0075afc0c106ab65f10a605d0b35d ]
Fixes the device_node leak.
Signed-off-by: Tzung-Bi Shih <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/mediatek/mt8173/mt8173-max98090.c | 3 +++
sound/soc/mediatek/mt8173/mt8173-rt5650-rt5514.c | 2 ++
sound/soc/mediatek/mt8173/mt8173-rt5650-rt5676.c | 2 ++
sound/soc/mediatek/mt8173/mt8173-rt5650.c | 2 ++
4 files changed, 9 insertions(+)
diff --git a/sound/soc/mediatek/mt8173/mt8173-max98090.c b/sound/soc/mediatek/mt8173/mt8173-max98090.c
index fc94314bfc02f..3bdd4931316cd 100644
--- a/sound/soc/mediatek/mt8173/mt8173-max98090.c
+++ b/sound/soc/mediatek/mt8173/mt8173-max98090.c
@@ -180,6 +180,9 @@ static int mt8173_max98090_dev_probe(struct platform_device *pdev)
if (ret)
dev_err(&pdev->dev, "%s snd_soc_register_card fail %d\n",
__func__, ret);
+
+ of_node_put(codec_node);
+ of_node_put(platform_node);
return ret;
}
diff --git a/sound/soc/mediatek/mt8173/mt8173-rt5650-rt5514.c b/sound/soc/mediatek/mt8173/mt8173-rt5650-rt5514.c
index 0f28dc2217c09..390da5bf727eb 100644
--- a/sound/soc/mediatek/mt8173/mt8173-rt5650-rt5514.c
+++ b/sound/soc/mediatek/mt8173/mt8173-rt5650-rt5514.c
@@ -218,6 +218,8 @@ static int mt8173_rt5650_rt5514_dev_probe(struct platform_device *pdev)
if (ret)
dev_err(&pdev->dev, "%s snd_soc_register_card fail %d\n",
__func__, ret);
+
+ of_node_put(platform_node);
return ret;
}
diff --git a/sound/soc/mediatek/mt8173/mt8173-rt5650-rt5676.c b/sound/soc/mediatek/mt8173/mt8173-rt5650-rt5676.c
index 077c6ee067806..c8e4e85e10575 100644
--- a/sound/soc/mediatek/mt8173/mt8173-rt5650-rt5676.c
+++ b/sound/soc/mediatek/mt8173/mt8173-rt5650-rt5676.c
@@ -285,6 +285,8 @@ static int mt8173_rt5650_rt5676_dev_probe(struct platform_device *pdev)
if (ret)
dev_err(&pdev->dev, "%s snd_soc_register_card fail %d\n",
__func__, ret);
+
+ of_node_put(platform_node);
return ret;
}
diff --git a/sound/soc/mediatek/mt8173/mt8173-rt5650.c b/sound/soc/mediatek/mt8173/mt8173-rt5650.c
index c28ebf891cb05..e168d31f44459 100644
--- a/sound/soc/mediatek/mt8173/mt8173-rt5650.c
+++ b/sound/soc/mediatek/mt8173/mt8173-rt5650.c
@@ -323,6 +323,8 @@ static int mt8173_rt5650_dev_probe(struct platform_device *pdev)
if (ret)
dev_err(&pdev->dev, "%s snd_soc_register_card fail %d\n",
__func__, ret);
+
+ of_node_put(platform_node);
return ret;
}
--
2.34.1
From: Martin Blumenstingl <[email protected]>
[ Upstream commit ff54938dd190d85f740b9bf9dde59b550936b621 ]
There are reports that 48kHz audio does not work on the WeTek Play 2
(which uses a GXBB SoC), while 44.1kHz audio works fine on the same
board. There are also reports of 48kHz audio working fine on GXL and
GXM SoCs, which are using an (almost) identical AIU (audio controller).
Experimenting has shown that MPLL0 is causing this problem. In the .dts
we have by default:
assigned-clocks = <&clkc CLKID_MPLL0>,
<&clkc CLKID_MPLL1>,
<&clkc CLKID_MPLL2>;
assigned-clock-rates = <294912000>,
<270950400>,
<393216000>;
The MPLL0 rate is divisible by 48kHz without remainder and the MPLL1
rate is divisible by 44.1kHz without remainder. Swapping these two clock
rates "fixes" 48kHz audio but breaks 44.1kHz audio.
Everything looks normal when looking at the info provided by the common
clock framework while playing 48kHz audio (via I2S with mclk-fs = 256):
mpll_prediv 1 1 0 2000000000
mpll0_div 1 1 0 294909641
mpll0 1 1 0 294909641
cts_amclk_sel 1 1 0 294909641
cts_amclk_div 1 1 0 12287902
cts_amclk 1 1 0 12287902
meson-clk-msr however shows that the actual MPLL0 clock is off by more
than 38MHz:
mp0_out 333322917 +/-10416Hz
The rate seen by meson-clk-msr is very close to what we would get when
SDM (the fractional part) was ignored:
(2000000000Hz * 16384) / ((16384 * 6) = 333.33MHz
If SDM was considered the we should get close to:
(2000000000Hz * 16384) / ((16384 * 6) + 12808) = 294.9MHz
Further experimenting shows that HHI_MPLL_CNTL7[15] does not have any
effect on the rate of MPLL0 as seen my meson-clk-msr (regardless of
whether that bit is zero or one the rate is always the same according to
meson-clk-msr). Using HHI_MPLL_CNTL[25] on the other hand as SDM_EN
results in SDM being considered for the rate output by the hardware. The
rate - as seen by meson-clk-msr - matches with what we expect when
SDM_EN is enabled (fractional part is being considered, resulting in a
294.9MHz output) or disable (fractional part being ignored, resulting in
a 333.33MHz output).
Reported-by: Christian Hewitt <[email protected]>
Tested-by: Christian Hewitt <[email protected]>
Signed-off-by: Martin Blumenstingl <[email protected]>
Signed-off-by: Jerome Brunet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/meson/gxbb.c | 44 +++++++++++++++++++++++++++++++++++++---
1 file changed, 41 insertions(+), 3 deletions(-)
diff --git a/drivers/clk/meson/gxbb.c b/drivers/clk/meson/gxbb.c
index 0a68af6eec3dd..d42551a46ec91 100644
--- a/drivers/clk/meson/gxbb.c
+++ b/drivers/clk/meson/gxbb.c
@@ -712,6 +712,35 @@ static struct clk_regmap gxbb_mpll_prediv = {
};
static struct clk_regmap gxbb_mpll0_div = {
+ .data = &(struct meson_clk_mpll_data){
+ .sdm = {
+ .reg_off = HHI_MPLL_CNTL7,
+ .shift = 0,
+ .width = 14,
+ },
+ .sdm_en = {
+ .reg_off = HHI_MPLL_CNTL,
+ .shift = 25,
+ .width = 1,
+ },
+ .n2 = {
+ .reg_off = HHI_MPLL_CNTL7,
+ .shift = 16,
+ .width = 9,
+ },
+ .lock = &meson_clk_lock,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "mpll0_div",
+ .ops = &meson_clk_mpll_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &gxbb_mpll_prediv.hw
+ },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap gxl_mpll0_div = {
.data = &(struct meson_clk_mpll_data){
.sdm = {
.reg_off = HHI_MPLL_CNTL7,
@@ -748,7 +777,16 @@ static struct clk_regmap gxbb_mpll0 = {
.hw.init = &(struct clk_init_data){
.name = "mpll0",
.ops = &clk_regmap_gate_ops,
- .parent_hws = (const struct clk_hw *[]) { &gxbb_mpll0_div.hw },
+ .parent_data = &(const struct clk_parent_data) {
+ /*
+ * Note:
+ * GXL and GXBB have different SDM_EN registers. We
+ * fallback to the global naming string mechanism so
+ * mpll0_div picks up the appropriate one.
+ */
+ .name = "mpll0_div",
+ .index = -1,
+ },
.num_parents = 1,
.flags = CLK_SET_RATE_PARENT,
},
@@ -3043,7 +3081,7 @@ static struct clk_hw_onecell_data gxl_hw_onecell_data = {
[CLKID_VAPB_1] = &gxbb_vapb_1.hw,
[CLKID_VAPB_SEL] = &gxbb_vapb_sel.hw,
[CLKID_VAPB] = &gxbb_vapb.hw,
- [CLKID_MPLL0_DIV] = &gxbb_mpll0_div.hw,
+ [CLKID_MPLL0_DIV] = &gxl_mpll0_div.hw,
[CLKID_MPLL1_DIV] = &gxbb_mpll1_div.hw,
[CLKID_MPLL2_DIV] = &gxbb_mpll2_div.hw,
[CLKID_MPLL_PREDIV] = &gxbb_mpll_prediv.hw,
@@ -3438,7 +3476,7 @@ static struct clk_regmap *const gxl_clk_regmaps[] = {
&gxbb_mpll0,
&gxbb_mpll1,
&gxbb_mpll2,
- &gxbb_mpll0_div,
+ &gxl_mpll0_div,
&gxbb_mpll1_div,
&gxbb_mpll2_div,
&gxbb_cts_amclk_div,
--
2.34.1
From: Michael Ellerman <[email protected]>
[ Upstream commit a4ac0d249a5db80e79d573db9e4ad29354b643a8 ]
setup_profiling_timer() is only needed when CONFIG_PROFILING is enabled.
Fixes the following W=1 warning when CONFIG_PROFILING=n:
linux/arch/powerpc/kernel/smp.c:1638:5: error: no previous prototype for ‘setup_profiling_timer’
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/kernel/smp.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index 452cbf98bfd71..50aeef08aa470 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -1488,10 +1488,12 @@ void start_secondary(void *unused)
BUG();
}
+#ifdef CONFIG_PROFILING
int setup_profiling_timer(unsigned int multiplier)
{
return 0;
}
+#endif
static void fixup_topology(void)
{
--
2.34.1
From: Thomas Weißschuh <[email protected]>
[ Upstream commit e96c1197aca628f7d2480a1cc3214912b40b3414 ]
The EC/ACPI firmware on Lenovo ThinkPads used to report a status
of "Unknown" when the battery is between the charge start and
charge stop thresholds. On Windows, it reports "Not Charging"
so the quirk has been added to also report correctly.
Now the "status" attribute returns "Not Charging" when the
battery on ThinkPads is not physicaly charging.
Signed-off-by: Thomas Weißschuh <[email protected]>
Reviewed-by: Hans de Goede <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/acpi/battery.c | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c
index e04352c1dc2ce..2376f57b3617a 100644
--- a/drivers/acpi/battery.c
+++ b/drivers/acpi/battery.c
@@ -59,6 +59,7 @@ static int battery_bix_broken_package;
static int battery_notification_delay_ms;
static int battery_ac_is_broken;
static int battery_check_pmic = 1;
+static int battery_quirk_notcharging;
static unsigned int cache_time = 1000;
module_param(cache_time, uint, 0644);
MODULE_PARM_DESC(cache_time, "cache time in milliseconds");
@@ -222,6 +223,8 @@ static int acpi_battery_get_property(struct power_supply *psy,
val->intval = POWER_SUPPLY_STATUS_CHARGING;
else if (acpi_battery_is_charged(battery))
val->intval = POWER_SUPPLY_STATUS_FULL;
+ else if (battery_quirk_notcharging)
+ val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
else
val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
break;
@@ -1105,6 +1108,12 @@ battery_do_not_check_pmic_quirk(const struct dmi_system_id *d)
return 0;
}
+static int __init battery_quirk_not_charging(const struct dmi_system_id *d)
+{
+ battery_quirk_notcharging = 1;
+ return 0;
+}
+
static const struct dmi_system_id bat_dmi_table[] __initconst = {
{
/* NEC LZ750/LS */
@@ -1149,6 +1158,19 @@ static const struct dmi_system_id bat_dmi_table[] __initconst = {
DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo MIIX 320-10ICR"),
},
},
+ {
+ /*
+ * On Lenovo ThinkPads the BIOS specification defines
+ * a state when the bits for charging and discharging
+ * are both set to 0. That state is "Not Charging".
+ */
+ .callback = battery_quirk_not_charging,
+ .ident = "Lenovo ThinkPad",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad"),
+ },
+ },
{},
};
--
2.34.1
From: Kunihiko Hayashi <[email protected]>
commit 80bb73a9fbcde4ecc55e12f10c73fabbe68a24d1 upstream.
In uniphier_spi_remove(), there is a wrong code to get private data from
the platform device, so the driver can't be removed properly.
The driver should get spi_master from the platform device and retrieve
the private data from it.
Cc: <[email protected]>
Fixes: 5ba155a4d4cc ("spi: add SPI controller driver for UniPhier SoC")
Signed-off-by: Kunihiko Hayashi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/spi/spi-uniphier.c | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)
--- a/drivers/spi/spi-uniphier.c
+++ b/drivers/spi/spi-uniphier.c
@@ -767,12 +767,13 @@ out_master_put:
static int uniphier_spi_remove(struct platform_device *pdev)
{
- struct uniphier_spi_priv *priv = platform_get_drvdata(pdev);
+ struct spi_master *master = platform_get_drvdata(pdev);
+ struct uniphier_spi_priv *priv = spi_master_get_devdata(master);
- if (priv->master->dma_tx)
- dma_release_channel(priv->master->dma_tx);
- if (priv->master->dma_rx)
- dma_release_channel(priv->master->dma_rx);
+ if (master->dma_tx)
+ dma_release_channel(master->dma_tx);
+ if (master->dma_rx)
+ dma_release_channel(master->dma_rx);
clk_disable_unprepare(priv->clk);
From: Arnaud Pouliquen <[email protected]>
commit 8066c615cb69b7da8a94f59379847b037b3a5e46 upstream.
During the rpmsg_dev_probe, if rpdev->ops->announce_create returns an
error, the rpmsg device and default endpoint should be freed before
exiting the function.
Fixes: 5e619b48677c ("rpmsg: Split rpmsg core and virtio backend")
Suggested-by: Bjorn Andersson <[email protected]>
Signed-off-by: Arnaud Pouliquen <[email protected]>
Reviewed-by: Bjorn Andersson <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mathieu Poirier <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/rpmsg/rpmsg_core.c | 20 ++++++++++++++++----
1 file changed, 16 insertions(+), 4 deletions(-)
--- a/drivers/rpmsg/rpmsg_core.c
+++ b/drivers/rpmsg/rpmsg_core.c
@@ -473,13 +473,25 @@ static int rpmsg_dev_probe(struct device
err = rpdrv->probe(rpdev);
if (err) {
dev_err(dev, "%s: failed: %d\n", __func__, err);
- if (ept)
- rpmsg_destroy_ept(ept);
- goto out;
+ goto destroy_ept;
}
- if (ept && rpdev->ops->announce_create)
+ if (ept && rpdev->ops->announce_create) {
err = rpdev->ops->announce_create(rpdev);
+ if (err) {
+ dev_err(dev, "failed to announce creation\n");
+ goto remove_rpdev;
+ }
+ }
+
+ return 0;
+
+remove_rpdev:
+ if (rpdrv->remove)
+ rpdrv->remove(rpdev);
+destroy_ept:
+ if (ept)
+ rpmsg_destroy_ept(ept);
out:
return err;
}
From: Heiner Kallweit <[email protected]>
commit c2aec59be093bd44627bc4f6bc67e4614a93a7b6 upstream.
This fix is basically the same as 3d6b661330a7 ("crypto: stm32 -
Revert broken pm_runtime_resume_and_get changes"), just for the omap
driver. If the return value isn't used, then pm_runtime_get_sync()
has to be used for ensuring that the usage count is balanced.
Fixes: 1f34cc4a8da3 ("crypto: omap-aes - Fix PM reference leak on omap-aes.c")
Cc: [email protected]
Signed-off-by: Heiner Kallweit <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/crypto/omap-aes.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/crypto/omap-aes.c
+++ b/drivers/crypto/omap-aes.c
@@ -1302,7 +1302,7 @@ static int omap_aes_suspend(struct devic
static int omap_aes_resume(struct device *dev)
{
- pm_runtime_resume_and_get(dev);
+ pm_runtime_get_sync(dev);
return 0;
}
#endif
From: Patrick Williams <[email protected]>
commit 84cc69589700b90a4c8d27b481a51fce8cca6051 upstream.
When using the tpm_tis-spi driver on a system missing the physical TPM,
a null pointer exception was observed.
[ 0.938677] Unable to handle kernel NULL pointer dereference at virtual address 00000004
[ 0.939020] pgd = 10c753cb
[ 0.939237] [00000004] *pgd=00000000
[ 0.939808] Internal error: Oops: 5 [#1] SMP ARM
[ 0.940157] CPU: 0 PID: 48 Comm: kworker/u4:1 Not tainted 5.15.10-dd1e40c #1
[ 0.940364] Hardware name: Generic DT based system
[ 0.940601] Workqueue: events_unbound async_run_entry_fn
[ 0.941048] PC is at tpm_tis_remove+0x28/0xb4
[ 0.941196] LR is at tpm_tis_core_init+0x170/0x6ac
This is due to an attempt in 'tpm_tis_remove' to use the drvdata, which
was not initialized in 'tpm_tis_core_init' prior to the first error.
Move the initialization of drvdata earlier so 'tpm_tis_remove' has
access to it.
Signed-off-by: Patrick Williams <[email protected]>
Fixes: 79ca6f74dae0 ("tpm: fix Atmel TPM crash caused by too frequent queries")
Cc: [email protected]
Reviewed-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/char/tpm/tpm_tis_core.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/char/tpm/tpm_tis_core.c
+++ b/drivers/char/tpm/tpm_tis_core.c
@@ -950,6 +950,8 @@ int tpm_tis_core_init(struct device *dev
priv->timeout_max = TPM_TIMEOUT_USECS_MAX;
priv->phy_ops = phy_ops;
+ dev_set_drvdata(&chip->dev, priv);
+
rc = tpm_tis_read32(priv, TPM_DID_VID(0), &vendor);
if (rc < 0)
return rc;
@@ -962,8 +964,6 @@ int tpm_tis_core_init(struct device *dev
priv->timeout_max = TIS_TIMEOUT_MAX_ATML;
}
- dev_set_drvdata(&chip->dev, priv);
-
if (is_bsw()) {
priv->ilb_base_addr = ioremap(INTEL_LEGACY_BLK_BASE_ADDR,
ILB_REMAP_SIZE);
From: Julia Lawall <[email protected]>
[ Upstream commit a841fd009e51c8c0a8f07c942e9ab6bb48da8858 ]
for_each_node_by_name performs an of_node_get on each iteration, so
a break out of the loop requires an of_node_put.
A simplified version of the semantic patch that fixes this problem is as
follows (http://coccinelle.lip6.fr):
// <smpl>
@@
expression e,e1;
local idexpression n;
@@
for_each_node_by_name(n, e1) {
... when != of_node_put(n)
when != e = n
(
return n;
|
+ of_node_put(n);
? return ...;
)
...
}
// </smpl>
Signed-off-by: Julia Lawall <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/platforms/cell/iommu.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c
index 2124831cf57c0..d04079b34d7c2 100644
--- a/arch/powerpc/platforms/cell/iommu.c
+++ b/arch/powerpc/platforms/cell/iommu.c
@@ -976,6 +976,7 @@ static int __init cell_iommu_fixed_mapping_init(void)
if (hbase < dbase || (hend > (dbase + dsize))) {
pr_debug("iommu: hash window doesn't fit in"
"real DMA window\n");
+ of_node_put(np);
return -1;
}
}
--
2.34.1
From: Marina Nikolic <[email protected]>
[ Upstream commit 11c9cc95f818f0f187e9b579a7f136f532b42445 ]
== Description ==
Setting values of pm attributes through sysfs
should not be allowed in SRIOV mode.
These calls will not be processed by FW anyway,
but error handling on sysfs level should be improved.
== Changes ==
This patch prohibits performing of all set commands
in SRIOV mode on sysfs level.
It offers better error handling as calls that are
not allowed will not be propagated further.
== Test ==
Writing to any sysfs file in passthrough mode will succeed.
Writing to any sysfs file in ONEVF mode will yield error:
"calling process does not have sufficient permission to execute a command".
Signed-off-by: Marina Nikolic <[email protected]>
Acked-by: Evan Quan <[email protected]>
Reviewed-by: Lijo Lazar <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/amd/pm/amdgpu_pm.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/gpu/drm/amd/pm/amdgpu_pm.c b/drivers/gpu/drm/amd/pm/amdgpu_pm.c
index 9f383b9041d28..49109614510b8 100644
--- a/drivers/gpu/drm/amd/pm/amdgpu_pm.c
+++ b/drivers/gpu/drm/amd/pm/amdgpu_pm.c
@@ -2098,6 +2098,12 @@ static int default_attr_update(struct amdgpu_device *adev, struct amdgpu_device_
}
}
+ /* setting should not be allowed from VF */
+ if (amdgpu_sriov_vf(adev)) {
+ dev_attr->attr.mode &= ~S_IWUGO;
+ dev_attr->store = NULL;
+ }
+
#undef DEVICE_ATTR_IS
return 0;
--
2.34.1
From: Julia Lawall <[email protected]>
[ Upstream commit 7d405a939ca960162eb30c1475759cb2fdf38f8c ]
for_each_compatible_node performs an of_node_get on each iteration, so
a break out of the loop requires an of_node_put.
A simplified version of the semantic patch that fixes this problem is as
follows (http://coccinelle.lip6.fr):
// <smpl>
@@
local idexpression n;
expression e;
@@
for_each_compatible_node(n,...) {
...
(
of_node_put(n);
|
e = n
|
+ of_node_put(n);
? break;
)
...
}
... when != n
// </smpl>
Signed-off-by: Julia Lawall <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/platforms/powernv/opal-lpc.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/powerpc/platforms/powernv/opal-lpc.c b/arch/powerpc/platforms/powernv/opal-lpc.c
index 608569082ba0b..123a0e799b7bd 100644
--- a/arch/powerpc/platforms/powernv/opal-lpc.c
+++ b/arch/powerpc/platforms/powernv/opal-lpc.c
@@ -396,6 +396,7 @@ void __init opal_lpc_init(void)
if (!of_get_property(np, "primary", NULL))
continue;
opal_lpc_chip_id = of_get_ibm_chip_id(np);
+ of_node_put(np);
break;
}
if (opal_lpc_chip_id < 0)
--
2.34.1
From: Thadeu Lima de Souza Cascardo <[email protected]>
[ Upstream commit 3c42e9542050d49610077e083c7c3f5fd5e26820 ]
A mis-match between reported and actual mitigation is not restricted to the
Vulnerable case. The guest might also report the mitigation as "Software
count cache flush" and the host will still mitigate with branch cache
disabled.
So, instead of skipping depending on the detected mitigation, simply skip
whenever the detected miss_percent is the expected one for a fully
mitigated system, that is, above 95%.
Signed-off-by: Thadeu Lima de Souza Cascardo <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/powerpc/security/spectre_v2.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/testing/selftests/powerpc/security/spectre_v2.c b/tools/testing/selftests/powerpc/security/spectre_v2.c
index adc2b7294e5fd..83647b8277e7d 100644
--- a/tools/testing/selftests/powerpc/security/spectre_v2.c
+++ b/tools/testing/selftests/powerpc/security/spectre_v2.c
@@ -193,7 +193,7 @@ int spectre_v2_test(void)
* We are not vulnerable and reporting otherwise, so
* missing such a mismatch is safe.
*/
- if (state == VULNERABLE)
+ if (miss_percent > 95)
return 4;
return 1;
--
2.34.1
From: Xie Yongji <[email protected]>
commit e388164ea385f04666c4633f5dc4f951fca71890 upstream.
The acceptable maximum value of lend parameter in
filemap_write_and_wait_range() is LLONG_MAX rather than -1. And there is
also some logic depending on LLONG_MAX check in write_cache_pages(). So
let's pass LLONG_MAX to filemap_write_and_wait_range() in
fuse_writeback_range() instead.
Fixes: 59bda8ecee2f ("fuse: flush extending writes")
Signed-off-by: Xie Yongji <[email protected]>
Cc: <[email protected]> # v5.15
Signed-off-by: Miklos Szeredi <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/fuse/file.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/fuse/file.c
+++ b/fs/fuse/file.c
@@ -3251,7 +3251,7 @@ fuse_direct_IO(struct kiocb *iocb, struc
static int fuse_writeback_range(struct inode *inode, loff_t start, loff_t end)
{
- int err = filemap_write_and_wait_range(inode->i_mapping, start, -1);
+ int err = filemap_write_and_wait_range(inode->i_mapping, start, LLONG_MAX);
if (!err)
fuse_sync_writes(inode);
From: Nicholas Piggin <[email protected]>
commit 467ba14e1660b52a2f9338b484704c461bd23019 upstream.
pmd_huge() is defined to false when HUGETLB_PAGE is not configured, but
the vmap code still installs huge PMDs. This leads to false bad PMD
errors when vunmapping because it is not seen as a huge PTE, and the bad
PMD check catches it. The end result may not be much more serious than
some bad pmd warning messages, because the pmd_none_or_clear_bad() does
what we wanted and clears the huge PTE anyway.
Fix this by checking pmd_is_leaf(), which checks for a PTE regardless of
config options. The whole huge/large/leaf stuff is a tangled mess but
that's kernel-wide and not something we can improve much in arch/powerpc
code.
pmd_page(), pud_page(), etc., called by vmalloc_to_page() on huge vmaps
can similarly trigger a false VM_BUG_ON when CONFIG_HUGETLB_PAGE=n, so
those checks are adjusted. The checks were added by commit d6eacedd1f0e
("powerpc/book3s: Use config independent helpers for page table walk"),
while implementing a similar fix for other page table walking functions.
Fixes: d909f9109c30 ("powerpc/64s/radix: Enable HAVE_ARCH_HUGE_VMAP")
Cc: [email protected] # v5.3+
Signed-off-by: Nicholas Piggin <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/mm/book3s64/radix_pgtable.c | 4 ++--
arch/powerpc/mm/pgtable_64.c | 14 +++++++++++---
2 files changed, 13 insertions(+), 5 deletions(-)
--- a/arch/powerpc/mm/book3s64/radix_pgtable.c
+++ b/arch/powerpc/mm/book3s64/radix_pgtable.c
@@ -1152,7 +1152,7 @@ int pud_set_huge(pud_t *pud, phys_addr_t
int pud_clear_huge(pud_t *pud)
{
- if (pud_huge(*pud)) {
+ if (pud_is_leaf(*pud)) {
pud_clear(pud);
return 1;
}
@@ -1199,7 +1199,7 @@ int pmd_set_huge(pmd_t *pmd, phys_addr_t
int pmd_clear_huge(pmd_t *pmd)
{
- if (pmd_huge(*pmd)) {
+ if (pmd_is_leaf(*pmd)) {
pmd_clear(pmd);
return 1;
}
--- a/arch/powerpc/mm/pgtable_64.c
+++ b/arch/powerpc/mm/pgtable_64.c
@@ -102,7 +102,8 @@ EXPORT_SYMBOL(__pte_frag_size_shift);
struct page *p4d_page(p4d_t p4d)
{
if (p4d_is_leaf(p4d)) {
- VM_WARN_ON(!p4d_huge(p4d));
+ if (!IS_ENABLED(CONFIG_HAVE_ARCH_HUGE_VMAP))
+ VM_WARN_ON(!p4d_huge(p4d));
return pte_page(p4d_pte(p4d));
}
return virt_to_page(p4d_page_vaddr(p4d));
@@ -112,7 +113,8 @@ struct page *p4d_page(p4d_t p4d)
struct page *pud_page(pud_t pud)
{
if (pud_is_leaf(pud)) {
- VM_WARN_ON(!pud_huge(pud));
+ if (!IS_ENABLED(CONFIG_HAVE_ARCH_HUGE_VMAP))
+ VM_WARN_ON(!pud_huge(pud));
return pte_page(pud_pte(pud));
}
return virt_to_page(pud_page_vaddr(pud));
@@ -125,7 +127,13 @@ struct page *pud_page(pud_t pud)
struct page *pmd_page(pmd_t pmd)
{
if (pmd_is_leaf(pmd)) {
- VM_WARN_ON(!(pmd_large(pmd) || pmd_huge(pmd)));
+ /*
+ * vmalloc_to_page may be called on any vmap address (not only
+ * vmalloc), and it uses pmd_page() etc., when huge vmap is
+ * enabled so these checks can't be used.
+ */
+ if (!IS_ENABLED(CONFIG_HAVE_ARCH_HUGE_VMAP))
+ VM_WARN_ON(!(pmd_large(pmd) || pmd_huge(pmd)));
return pte_page(pmd_pte(pmd));
}
return virt_to_page(pmd_page_vaddr(pmd));
From: Lukas Wunner <[email protected]>
[ Upstream commit 93a770b7e16772530196674ffc79bb13fa927dc6 ]
struct uart_port contains a cached copy of the Modem Control signals.
It is used to skip register writes in uart_update_mctrl() if the new
signal state equals the old signal state. It also avoids a register
read to obtain the current state of output signals.
When a uart_port is registered, uart_configure_port() changes signal
state but neglects to keep the cached copy in sync. That may cause
a subsequent register write to be incorrectly skipped. Fix it before
it trips somebody up.
This behavior has been present ever since the serial core was introduced
in 2002:
https://git.kernel.org/history/history/c/33c0d1b0c3eb
So far it was never an issue because the cached copy is initialized to 0
by kzalloc() and when uart_configure_port() is executed, at most DTR has
been set by uart_set_options() or sunsu_console_setup(). Therefore,
a stable designation seems unnecessary.
Signed-off-by: Lukas Wunner <[email protected]>
Link: https://lore.kernel.org/r/bceeaba030b028ed810272d55d5fc6f3656ddddb.1641129752.git.lukas@wunner.de
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/tty/serial/serial_core.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index 046bedca7b8f5..55108db5b64bf 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -2414,7 +2414,8 @@ uart_configure_port(struct uart_driver *drv, struct uart_state *state,
* We probably don't need a spinlock around this, but
*/
spin_lock_irqsave(&port->lock, flags);
- port->ops->set_mctrl(port, port->mctrl & TIOCM_DTR);
+ port->mctrl &= TIOCM_DTR;
+ port->ops->set_mctrl(port, port->mctrl);
spin_unlock_irqrestore(&port->lock, flags);
/*
--
2.34.1
From: Kyeong Yoo <[email protected]>
[ Upstream commit aa39cc675799bc92da153af9a13d6f969c348e82 ]
GC task can deadlock in read_cache_page() because it may attempt
to release a page that is actually allocated by another task in
jffs2_write_begin().
The reason is that in jffs2_write_begin() there is a small window
a cache page is allocated for use but not set Uptodate yet.
This ends up with a deadlock between two tasks:
1) A task (e.g. file copy)
- jffs2_write_begin() locks a cache page
- jffs2_write_end() tries to lock "alloc_sem" from
jffs2_reserve_space() <-- STUCK
2) GC task (jffs2_gcd_mtd3)
- jffs2_garbage_collect_pass() locks "alloc_sem"
- try to lock the same cache page in read_cache_page() <-- STUCK
So to avoid this deadlock, hold "alloc_sem" in jffs2_write_begin()
while reading data in a cache page.
Signed-off-by: Kyeong Yoo <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/jffs2/file.c | 40 +++++++++++++++++++++++++---------------
1 file changed, 25 insertions(+), 15 deletions(-)
diff --git a/fs/jffs2/file.c b/fs/jffs2/file.c
index 4fc8cd698d1a4..bd7d58d27bfc6 100644
--- a/fs/jffs2/file.c
+++ b/fs/jffs2/file.c
@@ -136,20 +136,15 @@ static int jffs2_write_begin(struct file *filp, struct address_space *mapping,
struct page *pg;
struct inode *inode = mapping->host;
struct jffs2_inode_info *f = JFFS2_INODE_INFO(inode);
+ struct jffs2_sb_info *c = JFFS2_SB_INFO(inode->i_sb);
pgoff_t index = pos >> PAGE_SHIFT;
uint32_t pageofs = index << PAGE_SHIFT;
int ret = 0;
- pg = grab_cache_page_write_begin(mapping, index, flags);
- if (!pg)
- return -ENOMEM;
- *pagep = pg;
-
jffs2_dbg(1, "%s()\n", __func__);
if (pageofs > inode->i_size) {
/* Make new hole frag from old EOF to new page */
- struct jffs2_sb_info *c = JFFS2_SB_INFO(inode->i_sb);
struct jffs2_raw_inode ri;
struct jffs2_full_dnode *fn;
uint32_t alloc_len;
@@ -160,7 +155,7 @@ static int jffs2_write_begin(struct file *filp, struct address_space *mapping,
ret = jffs2_reserve_space(c, sizeof(ri), &alloc_len,
ALLOC_NORMAL, JFFS2_SUMMARY_INODE_SIZE);
if (ret)
- goto out_page;
+ goto out_err;
mutex_lock(&f->sem);
memset(&ri, 0, sizeof(ri));
@@ -190,7 +185,7 @@ static int jffs2_write_begin(struct file *filp, struct address_space *mapping,
ret = PTR_ERR(fn);
jffs2_complete_reservation(c);
mutex_unlock(&f->sem);
- goto out_page;
+ goto out_err;
}
ret = jffs2_add_full_dnode_to_inode(c, f, fn);
if (f->metadata) {
@@ -205,13 +200,26 @@ static int jffs2_write_begin(struct file *filp, struct address_space *mapping,
jffs2_free_full_dnode(fn);
jffs2_complete_reservation(c);
mutex_unlock(&f->sem);
- goto out_page;
+ goto out_err;
}
jffs2_complete_reservation(c);
inode->i_size = pageofs;
mutex_unlock(&f->sem);
}
+ /*
+ * While getting a page and reading data in, lock c->alloc_sem until
+ * the page is Uptodate. Otherwise GC task may attempt to read the same
+ * page in read_cache_page(), which causes a deadlock.
+ */
+ mutex_lock(&c->alloc_sem);
+ pg = grab_cache_page_write_begin(mapping, index, flags);
+ if (!pg) {
+ ret = -ENOMEM;
+ goto release_sem;
+ }
+ *pagep = pg;
+
/*
* Read in the page if it wasn't already present. Cannot optimize away
* the whole page write case until jffs2_write_end can handle the
@@ -221,15 +229,17 @@ static int jffs2_write_begin(struct file *filp, struct address_space *mapping,
mutex_lock(&f->sem);
ret = jffs2_do_readpage_nolock(inode, pg);
mutex_unlock(&f->sem);
- if (ret)
- goto out_page;
+ if (ret) {
+ unlock_page(pg);
+ put_page(pg);
+ goto release_sem;
+ }
}
jffs2_dbg(1, "end write_begin(). pg->flags %lx\n", pg->flags);
- return ret;
-out_page:
- unlock_page(pg);
- put_page(pg);
+release_sem:
+ mutex_unlock(&c->alloc_sem);
+out_err:
return ret;
}
--
2.34.1
From: Andrey Ryabinin <[email protected]>
commit 9731698ecb9c851f353ce2496292ff9fcea39dff upstream.
cpuacct.stat in no-root cgroups shows user time without guest time
included int it. This doesn't match with user time shown in root
cpuacct.stat and /proc/<pid>/stat. This also affects cgroup2's cpu.stat
in the same way.
Make account_guest_time() to add user time to cgroup's cpustat to
fix this.
Fixes: ef12fefabf94 ("cpuacct: add per-cgroup utime/stime statistics")
Signed-off-by: Andrey Ryabinin <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Daniel Jordan <[email protected]>
Acked-by: Tejun Heo <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/sched/cputime.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/kernel/sched/cputime.c
+++ b/kernel/sched/cputime.c
@@ -147,10 +147,10 @@ void account_guest_time(struct task_stru
/* Add guest time to cpustat. */
if (task_nice(p) > 0) {
- cpustat[CPUTIME_NICE] += cputime;
+ task_group_account_field(p, CPUTIME_NICE, cputime);
cpustat[CPUTIME_GUEST_NICE] += cputime;
} else {
- cpustat[CPUTIME_USER] += cputime;
+ task_group_account_field(p, CPUTIME_USER, cputime);
cpustat[CPUTIME_GUEST] += cputime;
}
}
From: Randy Dunlap <[email protected]>
[ Upstream commit 077b7320942b64b0da182aefd83c374462a65535 ]
The function names init_registers() and restore_registers() are used
in several net/ethernet/ and gpu/drm/ drivers for other purposes (not
calls to UML functions), so rename them.
This fixes multiple build errors.
Signed-off-by: Randy Dunlap <[email protected]>
Cc: Jeff Dike <[email protected]>
Cc: Richard Weinberger <[email protected]>
Cc: Anton Ivanov <[email protected]>
Cc: [email protected]
Signed-off-by: Richard Weinberger <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/um/include/shared/registers.h | 4 ++--
arch/um/os-Linux/registers.c | 4 ++--
arch/um/os-Linux/start_up.c | 2 +-
arch/x86/um/syscalls_64.c | 3 ++-
4 files changed, 7 insertions(+), 6 deletions(-)
diff --git a/arch/um/include/shared/registers.h b/arch/um/include/shared/registers.h
index 0c50fa6e8a55b..fbb709a222839 100644
--- a/arch/um/include/shared/registers.h
+++ b/arch/um/include/shared/registers.h
@@ -16,8 +16,8 @@ extern int restore_fp_registers(int pid, unsigned long *fp_regs);
extern int save_fpx_registers(int pid, unsigned long *fp_regs);
extern int restore_fpx_registers(int pid, unsigned long *fp_regs);
extern int save_registers(int pid, struct uml_pt_regs *regs);
-extern int restore_registers(int pid, struct uml_pt_regs *regs);
-extern int init_registers(int pid);
+extern int restore_pid_registers(int pid, struct uml_pt_regs *regs);
+extern int init_pid_registers(int pid);
extern void get_safe_registers(unsigned long *regs, unsigned long *fp_regs);
extern unsigned long get_thread_reg(int reg, jmp_buf *buf);
extern int get_fp_registers(int pid, unsigned long *regs);
diff --git a/arch/um/os-Linux/registers.c b/arch/um/os-Linux/registers.c
index 2d9270508e156..b123955be7acc 100644
--- a/arch/um/os-Linux/registers.c
+++ b/arch/um/os-Linux/registers.c
@@ -21,7 +21,7 @@ int save_registers(int pid, struct uml_pt_regs *regs)
return 0;
}
-int restore_registers(int pid, struct uml_pt_regs *regs)
+int restore_pid_registers(int pid, struct uml_pt_regs *regs)
{
int err;
@@ -36,7 +36,7 @@ int restore_registers(int pid, struct uml_pt_regs *regs)
static unsigned long exec_regs[MAX_REG_NR];
static unsigned long exec_fp_regs[FP_SIZE];
-int init_registers(int pid)
+int init_pid_registers(int pid)
{
int err;
diff --git a/arch/um/os-Linux/start_up.c b/arch/um/os-Linux/start_up.c
index f79dc338279e6..b28373a2b8d2d 100644
--- a/arch/um/os-Linux/start_up.c
+++ b/arch/um/os-Linux/start_up.c
@@ -336,7 +336,7 @@ void __init os_early_checks(void)
check_tmpexec();
pid = start_ptraced_child();
- if (init_registers(pid))
+ if (init_pid_registers(pid))
fatal("Failed to initialize default registers");
stop_ptraced_child(pid, 1, 1);
}
diff --git a/arch/x86/um/syscalls_64.c b/arch/x86/um/syscalls_64.c
index 58f51667e2e4b..8249685b40960 100644
--- a/arch/x86/um/syscalls_64.c
+++ b/arch/x86/um/syscalls_64.c
@@ -11,6 +11,7 @@
#include <linux/uaccess.h>
#include <asm/prctl.h> /* XXX This should get the constants from libc */
#include <os.h>
+#include <registers.h>
long arch_prctl(struct task_struct *task, int option,
unsigned long __user *arg2)
@@ -35,7 +36,7 @@ long arch_prctl(struct task_struct *task, int option,
switch (option) {
case ARCH_SET_FS:
case ARCH_SET_GS:
- ret = restore_registers(pid, ¤t->thread.regs.regs);
+ ret = restore_pid_registers(pid, ¤t->thread.regs.regs);
if (ret)
return ret;
break;
--
2.34.1
From: Biwen Li <[email protected]>
[ Upstream commit cbe9d948eadfe352ad45495a7cc5bf20a1b29d90 ]
The i2c rtc is on i2c2 bus not i2c1 bus, so fix it in dts.
Signed-off-by: Biwen Li <[email protected]>
Signed-off-by: Li Yang <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts | 14 +++++++++-----
1 file changed, 9 insertions(+), 5 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
index 13cdc958ba3ea..71858c9376c25 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
@@ -261,11 +261,6 @@
vcc-supply = <&sb_3v3>;
};
- rtc@51 {
- compatible = "nxp,pcf2129";
- reg = <0x51>;
- };
-
eeprom@56 {
compatible = "atmel,24c512";
reg = <0x56>;
@@ -307,6 +302,15 @@
};
+&i2c1 {
+ status = "okay";
+
+ rtc@51 {
+ compatible = "nxp,pcf2129";
+ reg = <0x51>;
+ };
+};
+
&enetc_port1 {
phy-handle = <&qds_phy1>;
phy-connection-type = "rgmii-id";
--
2.34.1
From: Jan Kiszka <[email protected]>
[ Upstream commit 8aa35e0bb5eaa42bac415ad0847985daa7b4890c ]
So far, "(null)" is reported for the node that is missing clocks.
Signed-off-by: Jan Kiszka <[email protected]>
Acked-by: Suman Anna <[email protected]>
Signed-off-by: Nishanth Menon <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/soc/ti/pruss.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/soc/ti/pruss.c b/drivers/soc/ti/pruss.c
index cc0b4ad7a3d34..30695172a508f 100644
--- a/drivers/soc/ti/pruss.c
+++ b/drivers/soc/ti/pruss.c
@@ -131,7 +131,7 @@ static int pruss_clk_init(struct pruss *pruss, struct device_node *cfg_node)
clks_np = of_get_child_by_name(cfg_node, "clocks");
if (!clks_np) {
- dev_err(dev, "%pOF is missing its 'clocks' node\n", clks_np);
+ dev_err(dev, "%pOF is missing its 'clocks' node\n", cfg_node);
return -ENODEV;
}
--
2.34.1
From: Sameer Pujar <[email protected]>
[ Upstream commit 48f6e195039486bc303118948f49a9873acc888f ]
As per the HDA binding doc reorder {clock,reset}-names entries for
Tegra194. This also serves as a preparation for converting existing
binding doc to json-schema.
Signed-off-by: Sameer Pujar <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/nvidia/tegra194.dtsi | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
index 9b5007e5f790f..815df654e6387 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
@@ -782,13 +782,13 @@
reg = <0x3510000 0x10000>;
interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&bpmp TEGRA194_CLK_HDA>,
- <&bpmp TEGRA194_CLK_HDA2CODEC_2X>,
- <&bpmp TEGRA194_CLK_HDA2HDMICODEC>;
- clock-names = "hda", "hda2codec_2x", "hda2hdmi";
+ <&bpmp TEGRA194_CLK_HDA2HDMICODEC>,
+ <&bpmp TEGRA194_CLK_HDA2CODEC_2X>;
+ clock-names = "hda", "hda2hdmi", "hda2codec_2x";
resets = <&bpmp TEGRA194_RESET_HDA>,
- <&bpmp TEGRA194_RESET_HDA2CODEC_2X>,
- <&bpmp TEGRA194_RESET_HDA2HDMICODEC>;
- reset-names = "hda", "hda2codec_2x", "hda2hdmi";
+ <&bpmp TEGRA194_RESET_HDA2HDMICODEC>,
+ <&bpmp TEGRA194_RESET_HDA2CODEC_2X>;
+ reset-names = "hda", "hda2hdmi", "hda2codec_2x";
power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISP>;
interconnects = <&mc TEGRA194_MEMORY_CLIENT_HDAR &emc>,
<&mc TEGRA194_MEMORY_CLIENT_HDAW &emc>;
--
2.34.1
From: Jan Kara <[email protected]>
[ Upstream commit f05f2429eec60851b98bdde213de31dab697c01b ]
When memory allocation of iinfo or block allocation fails, already
allocated struct udf_inode_info gets freed with iput() and
udf_evict_inode() may look at inode fields which are not properly
initialized. Fix it by marking inode bad before dropping reference to it
in udf_new_inode().
Reported-by: [email protected]
Signed-off-by: Jan Kara <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/udf/ialloc.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/fs/udf/ialloc.c b/fs/udf/ialloc.c
index 84ed23edebfd3..87a77bf70ee19 100644
--- a/fs/udf/ialloc.c
+++ b/fs/udf/ialloc.c
@@ -77,6 +77,7 @@ struct inode *udf_new_inode(struct inode *dir, umode_t mode)
GFP_KERNEL);
}
if (!iinfo->i_data) {
+ make_bad_inode(inode);
iput(inode);
return ERR_PTR(-ENOMEM);
}
@@ -86,6 +87,7 @@ struct inode *udf_new_inode(struct inode *dir, umode_t mode)
dinfo->i_location.partitionReferenceNum,
start, &err);
if (err) {
+ make_bad_inode(inode);
iput(inode);
return ERR_PTR(err);
}
--
2.34.1
From: Sergey Shtylyov <[email protected]>
[ Upstream commit 77bed755e0f06135faccdd3948863703f9a6e640 ]
The driver neglects to check the result of platform_get_irq()'s call and
blithely passes the negative error codes to devm_request_threaded_irq()
(which takes *unsigned* IRQ #), causing it to fail with -EINVAL, overriding
an original error code. Stop calling devm_request_threaded_irq() with the
invalid IRQ #s.
Fixes: e4bf1b0970ef ("mmc: host: meson-mx-sdhc: new driver for the Amlogic Meson SDHC host")
Signed-off-by: Sergey Shtylyov <[email protected]>
Reviewed-by: Martin Blumenstingl <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mmc/host/meson-mx-sdhc-mmc.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/mmc/host/meson-mx-sdhc-mmc.c b/drivers/mmc/host/meson-mx-sdhc-mmc.c
index 8fdd0bbbfa21f..28aa78aa08f3f 100644
--- a/drivers/mmc/host/meson-mx-sdhc-mmc.c
+++ b/drivers/mmc/host/meson-mx-sdhc-mmc.c
@@ -854,6 +854,11 @@ static int meson_mx_sdhc_probe(struct platform_device *pdev)
goto err_disable_pclk;
irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ ret = irq;
+ goto err_disable_pclk;
+ }
+
ret = devm_request_threaded_irq(dev, irq, meson_mx_sdhc_irq,
meson_mx_sdhc_irq_thread, IRQF_ONESHOT,
NULL, host);
--
2.34.1
From: Florian Westphal <[email protected]>
[ Upstream commit 23c54263efd7cb605e2f7af72717a2a951999217 ]
This is needed in case a new transaction is made that doesn't insert any
new elements into an already existing set.
Else, after second 'nft -f ruleset.txt', lookups in such a set will fail
because ->lookup() encounters raw_cpu_ptr(m->scratch) == NULL.
For the initial rule load, insertion of elements takes care of the
allocation, but for rule reloads this isn't guaranteed: we might not
have additions to the set.
Fixes: 3c4287f62044a90e ("nf_tables: Add set type for arbitrary concatenation of ranges")
Reported-by: etkaar <[email protected]>
Signed-off-by: Florian Westphal <[email protected]>
Reviewed-by: Stefano Brivio <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/netfilter/nft_set_pipapo.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/net/netfilter/nft_set_pipapo.c b/net/netfilter/nft_set_pipapo.c
index 2d73f265b12c9..f67c4436c5d31 100644
--- a/net/netfilter/nft_set_pipapo.c
+++ b/net/netfilter/nft_set_pipapo.c
@@ -1290,6 +1290,11 @@ static struct nft_pipapo_match *pipapo_clone(struct nft_pipapo_match *old)
if (!new->scratch_aligned)
goto out_scratch;
#endif
+ for_each_possible_cpu(i)
+ *per_cpu_ptr(new->scratch, i) = NULL;
+
+ if (pipapo_realloc_scratch(new, old->bsize_max))
+ goto out_scratch_realloc;
rcu_head_init(&new->rcu);
@@ -1334,6 +1339,9 @@ out_lt:
kvfree(dst->lt);
dst--;
}
+out_scratch_realloc:
+ for_each_possible_cpu(i)
+ kfree(*per_cpu_ptr(new->scratch, i));
#ifdef NFT_PIPAPO_ALIGN
free_percpu(new->scratch_aligned);
#endif
--
2.34.1
From: Kuniyuki Iwashima <[email protected]>
[ Upstream commit 04c350b1ae6bdb12b84009a4d0bf5ab4e621c47b ]
The commit 4057765f2dee ("sock: consistent handling of extreme
SO_SNDBUF/SO_RCVBUF values") added a change to prevent underflow
in setsockopt() around SO_SNDBUF/SO_RCVBUF.
This patch adds the same change to _bpf_setsockopt().
Fixes: 4057765f2dee ("sock: consistent handling of extreme SO_SNDBUF/SO_RCVBUF values")
Signed-off-by: Kuniyuki Iwashima <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
net/core/filter.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/net/core/filter.c b/net/core/filter.c
index abd58dce49bbc..706c31ae65b01 100644
--- a/net/core/filter.c
+++ b/net/core/filter.c
@@ -4711,12 +4711,14 @@ static int _bpf_setsockopt(struct sock *sk, int level, int optname,
switch (optname) {
case SO_RCVBUF:
val = min_t(u32, val, sysctl_rmem_max);
+ val = min_t(int, val, INT_MAX / 2);
sk->sk_userlocks |= SOCK_RCVBUF_LOCK;
WRITE_ONCE(sk->sk_rcvbuf,
max_t(int, val * 2, SOCK_MIN_RCVBUF));
break;
case SO_SNDBUF:
val = min_t(u32, val, sysctl_wmem_max);
+ val = min_t(int, val, INT_MAX / 2);
sk->sk_userlocks |= SOCK_SNDBUF_LOCK;
WRITE_ONCE(sk->sk_sndbuf,
max_t(int, val * 2, SOCK_MIN_SNDBUF));
--
2.34.1
From: Ye Bin <[email protected]>
commit 380a0091cab482489e9b19e07f2a166ad2b76d5c upstream.
We got issue as follows when run syzkaller:
[ 167.936972] EXT4-fs error (device loop0): __ext4_remount:6314: comm rep: Abort forced by user
[ 167.938306] EXT4-fs (loop0): Remounting filesystem read-only
[ 167.981637] Assertion failure in ext4_getblk() at fs/ext4/inode.c:847: '(EXT4_SB(inode->i_sb)->s_mount_state & EXT4_FC_REPLAY) || handle != NULL || create == 0'
[ 167.983601] ------------[ cut here ]------------
[ 167.984245] kernel BUG at fs/ext4/inode.c:847!
[ 167.984882] invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
[ 167.985624] CPU: 7 PID: 2290 Comm: rep Tainted: G B 5.16.0-rc5-next-20211217+ #123
[ 167.986823] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-buildvm-ppc64le-16.ppc.fedoraproject.org-3.fc31 04/01/2014
[ 167.988590] RIP: 0010:ext4_getblk+0x17e/0x504
[ 167.989189] Code: c6 01 74 28 49 c7 c0 a0 a3 5c 9b b9 4f 03 00 00 48 c7 c2 80 9c 5c 9b 48 c7 c6 40 b6 5c 9b 48 c7 c7 20 a4 5c 9b e8 77 e3 fd ff <0f> 0b 8b 04 244
[ 167.991679] RSP: 0018:ffff8881736f7398 EFLAGS: 00010282
[ 167.992385] RAX: 0000000000000094 RBX: 1ffff1102e6dee75 RCX: 0000000000000000
[ 167.993337] RDX: 0000000000000001 RSI: ffffffff9b6e29e0 RDI: ffffed102e6dee66
[ 167.994292] RBP: ffff88816a076210 R08: 0000000000000094 R09: ffffed107363fa09
[ 167.995252] R10: ffff88839b1fd047 R11: ffffed107363fa08 R12: ffff88816a0761e8
[ 167.996205] R13: 0000000000000000 R14: 0000000000000021 R15: 0000000000000001
[ 167.997158] FS: 00007f6a1428c740(0000) GS:ffff88839b000000(0000) knlGS:0000000000000000
[ 167.998238] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 167.999025] CR2: 00007f6a140716c8 CR3: 0000000133216000 CR4: 00000000000006e0
[ 167.999987] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 168.000944] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 168.001899] Call Trace:
[ 168.002235] <TASK>
[ 168.007167] ext4_bread+0xd/0x53
[ 168.007612] ext4_quota_write+0x20c/0x5c0
[ 168.010457] write_blk+0x100/0x220
[ 168.010944] remove_free_dqentry+0x1c6/0x440
[ 168.011525] free_dqentry.isra.0+0x565/0x830
[ 168.012133] remove_tree+0x318/0x6d0
[ 168.014744] remove_tree+0x1eb/0x6d0
[ 168.017346] remove_tree+0x1eb/0x6d0
[ 168.019969] remove_tree+0x1eb/0x6d0
[ 168.022128] qtree_release_dquot+0x291/0x340
[ 168.023297] v2_release_dquot+0xce/0x120
[ 168.023847] dquot_release+0x197/0x3e0
[ 168.024358] ext4_release_dquot+0x22a/0x2d0
[ 168.024932] dqput.part.0+0x1c9/0x900
[ 168.025430] __dquot_drop+0x120/0x190
[ 168.025942] ext4_clear_inode+0x86/0x220
[ 168.026472] ext4_evict_inode+0x9e8/0xa22
[ 168.028200] evict+0x29e/0x4f0
[ 168.028625] dispose_list+0x102/0x1f0
[ 168.029148] evict_inodes+0x2c1/0x3e0
[ 168.030188] generic_shutdown_super+0xa4/0x3b0
[ 168.030817] kill_block_super+0x95/0xd0
[ 168.031360] deactivate_locked_super+0x85/0xd0
[ 168.031977] cleanup_mnt+0x2bc/0x480
[ 168.033062] task_work_run+0xd1/0x170
[ 168.033565] do_exit+0xa4f/0x2b50
[ 168.037155] do_group_exit+0xef/0x2d0
[ 168.037666] __x64_sys_exit_group+0x3a/0x50
[ 168.038237] do_syscall_64+0x3b/0x90
[ 168.038751] entry_SYSCALL_64_after_hwframe+0x44/0xae
In order to reproduce this problem, the following conditions need to be met:
1. Ext4 filesystem with no journal;
2. Filesystem image with incorrect quota data;
3. Abort filesystem forced by user;
4. umount filesystem;
As in ext4_quota_write:
...
if (EXT4_SB(sb)->s_journal && !handle) {
ext4_msg(sb, KERN_WARNING, "Quota write (off=%llu, len=%llu)"
" cancelled because transaction is not started",
(unsigned long long)off, (unsigned long long)len);
return -EIO;
}
...
We only check handle if NULL when filesystem has journal. There is need
check handle if NULL even when filesystem has no journal.
Signed-off-by: Ye Bin <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/super.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -6545,7 +6545,7 @@ static ssize_t ext4_quota_write(struct s
struct buffer_head *bh;
handle_t *handle = journal_current_handle();
- if (EXT4_SB(sb)->s_journal && !handle) {
+ if (!handle) {
ext4_msg(sb, KERN_WARNING, "Quota write (off=%llu, len=%llu)"
" cancelled because transaction is not started",
(unsigned long long)off, (unsigned long long)len);
From: Christophe Leroy <[email protected]>
[ Upstream commit 06e7cbc29e97b4713b4ea6def04ae8501a7d1a59 ]
As reported by Carlo, 16Mbytes is not enough with modern kernels
that tend to be a bit big, so map another 16M page at boot.
Signed-off-by: Christophe Leroy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/89b5f974a7fa5011206682cd092e2c905530ff46.1632755552.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/kernel/head_40x.S | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/arch/powerpc/kernel/head_40x.S b/arch/powerpc/kernel/head_40x.S
index a1ae00689e0f4..aeb9bc9958749 100644
--- a/arch/powerpc/kernel/head_40x.S
+++ b/arch/powerpc/kernel/head_40x.S
@@ -27,6 +27,7 @@
#include <linux/init.h>
#include <linux/pgtable.h>
+#include <linux/sizes.h>
#include <asm/processor.h>
#include <asm/page.h>
#include <asm/mmu.h>
@@ -626,7 +627,7 @@ start_here:
b . /* prevent prefetch past rfi */
/* Set up the initial MMU state so we can do the first level of
- * kernel initialization. This maps the first 16 MBytes of memory 1:1
+ * kernel initialization. This maps the first 32 MBytes of memory 1:1
* virtual to physical and more importantly sets the cache mode.
*/
initial_mmu:
@@ -663,6 +664,12 @@ initial_mmu:
tlbwe r4,r0,TLB_DATA /* Load the data portion of the entry */
tlbwe r3,r0,TLB_TAG /* Load the tag portion of the entry */
+ li r0,62 /* TLB slot 62 */
+ addis r4,r4,SZ_16M@h
+ addis r3,r3,SZ_16M@h
+ tlbwe r4,r0,TLB_DATA /* Load the data portion of the entry */
+ tlbwe r3,r0,TLB_TAG /* Load the tag portion of the entry */
+
isync
/* Establish the exception vector base
--
2.34.1
From: Petr Cvachoucek <[email protected]>
commit 3fea4d9d160186617ff40490ae01f4f4f36b28ff upstream.
it seems freeing the write buffers in the error path of the
ubifs_remount_rw() is wrong. It leads later to a kernel oops like this:
[10016.431274] UBIFS (ubi0:0): start fixing up free space
[10090.810042] UBIFS (ubi0:0): free space fixup complete
[10090.814623] UBIFS error (ubi0:0 pid 512): ubifs_remount_fs: cannot
spawn "ubifs_bgt0_0", error -4
[10101.915108] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started,
PID 517
[10105.275498] Unable to handle kernel NULL pointer dereference at
virtual address 0000000000000030
[10105.284352] Mem abort info:
[10105.287160] ESR = 0x96000006
[10105.290252] EC = 0x25: DABT (current EL), IL = 32 bits
[10105.295592] SET = 0, FnV = 0
[10105.298652] EA = 0, S1PTW = 0
[10105.301848] Data abort info:
[10105.304723] ISV = 0, ISS = 0x00000006
[10105.308573] CM = 0, WnR = 0
[10105.311564] user pgtable: 4k pages, 48-bit VAs, pgdp=00000000f03d1000
[10105.318034] [0000000000000030] pgd=00000000f6cee003,
pud=00000000f4884003, pmd=0000000000000000
[10105.326783] Internal error: Oops: 96000006 [#1] PREEMPT SMP
[10105.332355] Modules linked in: ath10k_pci ath10k_core ath mac80211
libarc4 cfg80211 nvme nvme_core cryptodev(O)
[10105.342468] CPU: 3 PID: 518 Comm: touch Tainted: G O
5.4.3 #1
[10105.349517] Hardware name: HYPEX CPU (DT)
[10105.353525] pstate: 40000005 (nZcv daif -PAN -UAO)
[10105.358324] pc : atomic64_try_cmpxchg_acquire.constprop.22+0x8/0x34
[10105.364596] lr : mutex_lock+0x1c/0x34
[10105.368253] sp : ffff000075633aa0
[10105.371563] x29: ffff000075633aa0 x28: 0000000000000001
[10105.376874] x27: ffff000076fa80c8 x26: 0000000000000004
[10105.382185] x25: 0000000000000030 x24: 0000000000000000
[10105.387495] x23: 0000000000000000 x22: 0000000000000038
[10105.392807] x21: 000000000000000c x20: ffff000076fa80c8
[10105.398119] x19: ffff000076fa8000 x18: 0000000000000000
[10105.403429] x17: 0000000000000000 x16: 0000000000000000
[10105.408741] x15: 0000000000000000 x14: fefefefefefefeff
[10105.414052] x13: 0000000000000000 x12: 0000000000000fe0
[10105.419364] x11: 0000000000000fe0 x10: ffff000076709020
[10105.424675] x9 : 0000000000000000 x8 : 00000000000000a0
[10105.429986] x7 : ffff000076fa80f4 x6 : 0000000000000030
[10105.435297] x5 : 0000000000000000 x4 : 0000000000000000
[10105.440609] x3 : 0000000000000000 x2 : ffff00006f276040
[10105.445920] x1 : ffff000075633ab8 x0 : 0000000000000030
[10105.451232] Call trace:
[10105.453676] atomic64_try_cmpxchg_acquire.constprop.22+0x8/0x34
[10105.459600] ubifs_garbage_collect+0xb4/0x334
[10105.463956] ubifs_budget_space+0x398/0x458
[10105.468139] ubifs_create+0x50/0x180
[10105.471712] path_openat+0x6a0/0x9b0
[10105.475284] do_filp_open+0x34/0x7c
[10105.478771] do_sys_open+0x78/0xe4
[10105.482170] __arm64_sys_openat+0x1c/0x24
[10105.486180] el0_svc_handler+0x84/0xc8
[10105.489928] el0_svc+0x8/0xc
[10105.492808] Code: 52800013 17fffffb d2800003 f9800011 (c85ffc05)
[10105.498903] ---[ end trace 46b721d93267a586 ]---
To reproduce the problem:
1. Filesystem initially mounted read-only, free space fixup flag set.
2. mount -o remount,rw <mountpoint>
3. it takes some time (free space fixup running)
... try to terminate running mount by CTRL-C
... does not respond, only after free space fixup is complete
... then "ubifs_remount_fs: cannot spawn "ubifs_bgt0_0", error -4"
4. mount -o remount,rw <mountpoint>
... now finished instantly (fixup already done).
5. Create file or just unmount the filesystem and we get the oops.
Cc: <[email protected]>
Fixes: b50b9f408502 ("UBIFS: do not free write-buffers when in R/O mode")
Signed-off-by: Petr Cvachoucek <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ubifs/super.c | 1 -
1 file changed, 1 deletion(-)
--- a/fs/ubifs/super.c
+++ b/fs/ubifs/super.c
@@ -1853,7 +1853,6 @@ out:
kthread_stop(c->bgt);
c->bgt = NULL;
}
- free_wbufs(c);
kfree(c->write_reserve_buf);
c->write_reserve_buf = NULL;
vfree(c->ileb_buf);
From: Heiner Kallweit <[email protected]>
[ Upstream commit effa453168a7eeb8a562ff4edc1dbf9067360a61 ]
If an invalid block size is provided, reject it instead of silently
changing it to a supported value. Especially critical I see the case of
a write transfer with block length 0. In this case we have no guarantee
that the byte we would write is valid. When silently reducing a read to
32 bytes then we don't return an error and the caller may falsely
assume that we returned the full requested data.
If this change should break any (broken) caller, then I think we should
fix the caller.
Signed-off-by: Heiner Kallweit <[email protected]>
Reviewed-by: Jean Delvare <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/i2c/busses/i2c-i801.c | 15 +++++----------
1 file changed, 5 insertions(+), 10 deletions(-)
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index eab6fd6b890eb..5618c1ff34dc3 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -797,6 +797,11 @@ static int i801_block_transaction(struct i801_priv *priv,
int result = 0;
unsigned char hostc;
+ if (read_write == I2C_SMBUS_READ && command == I2C_SMBUS_BLOCK_DATA)
+ data->block[0] = I2C_SMBUS_BLOCK_MAX;
+ else if (data->block[0] < 1 || data->block[0] > I2C_SMBUS_BLOCK_MAX)
+ return -EPROTO;
+
if (command == I2C_SMBUS_I2C_BLOCK_DATA) {
if (read_write == I2C_SMBUS_WRITE) {
/* set I2C_EN bit in configuration register */
@@ -810,16 +815,6 @@ static int i801_block_transaction(struct i801_priv *priv,
}
}
- if (read_write == I2C_SMBUS_WRITE
- || command == I2C_SMBUS_I2C_BLOCK_DATA) {
- if (data->block[0] < 1)
- data->block[0] = 1;
- if (data->block[0] > I2C_SMBUS_BLOCK_MAX)
- data->block[0] = I2C_SMBUS_BLOCK_MAX;
- } else {
- data->block[0] = 32; /* max for SMBus block reads */
- }
-
/* Experience has shown that the block buffer can only be used for
SMBus (not I2C) block transactions, even though the datasheet
doesn't mention this limitation. */
--
2.34.1
From: Lukas Wunner <[email protected]>
commit d3b3404df318504ec084213ab1065b73f49b0f1d upstream.
Commit a6845e1e1b78 ("serial: core: Consider rs485 settings to drive
RTS") sought to deassert RTS when opening an rs485-enabled uart port.
That way, the transceiver does not occupy the bus until it transmits
data.
Unfortunately, the commit mixed up the logic and *asserted* RTS instead
of *deasserting* it:
The commit amended uart_port_dtr_rts(), which raises DTR and RTS when
opening an rs232 port. "Raising" actually means lowering the signal
that's coming out of the uart, because an rs232 transceiver not only
changes a signal's voltage level, it also *inverts* the signal. See
the simplified schematic in the MAX232 datasheet for an example:
https://www.ti.com/lit/ds/symlink/max232.pdf
So, to raise RTS on an rs232 port, TIOCM_RTS is *set* in port->mctrl
and that results in the signal being driven low.
In contrast to rs232, the signal level for rs485 Transmit Enable is the
identity, not the inversion: If the transceiver expects a "high" RTS
signal for Transmit Enable, the signal coming out of the uart must also
be high, so TIOCM_RTS must be *cleared* in port->mctrl.
The commit did the exact opposite, but it's easy to see why given the
confusing semantics of rs232 and rs485. Fix it.
Fixes: a6845e1e1b78 ("serial: core: Consider rs485 settings to drive RTS")
Cc: [email protected] # v4.14+
Cc: Rafael Gago Castano <[email protected]>
Cc: Jan Kiszka <[email protected]>
Cc: Su Bao Cheng <[email protected]>
Signed-off-by: Lukas Wunner <[email protected]>
Link: https://lore.kernel.org/r/9395767847833f2f3193c49cde38501eeb3b5669.1639821059.git.lukas@wunner.de
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/tty/serial/serial_core.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -162,7 +162,7 @@ static void uart_port_dtr_rts(struct uar
int RTS_after_send = !!(uport->rs485.flags & SER_RS485_RTS_AFTER_SEND);
if (raise) {
- if (rs485_on && !RTS_after_send) {
+ if (rs485_on && RTS_after_send) {
uart_set_mctrl(uport, TIOCM_DTR);
uart_clear_mctrl(uport, TIOCM_RTS);
} else {
@@ -171,7 +171,7 @@ static void uart_port_dtr_rts(struct uar
} else {
unsigned int clear = TIOCM_DTR;
- clear |= (!rs485_on || !RTS_after_send) ? TIOCM_RTS : 0;
+ clear |= (!rs485_on || RTS_after_send) ? TIOCM_RTS : 0;
uart_clear_mctrl(uport, clear);
}
}
From: Ilan Peer <[email protected]>
commit ced50f1133af12f7521bb777fcf4046ca908fb77 upstream.
With the introduction of 6GHz channels the scan guard timeout should
be adjusted to account for the following extreme case:
- All 6GHz channels are scanned passively: 58 channels.
- The scan is fragmented with the following parameters: 3 fragments,
95 TUs suspend time, 44 TUs maximal out of channel time.
The above would result with scan time of more than 24 seconds. Thus,
set the timeout to 30 seconds.
Cc: [email protected]
Signed-off-by: Ilan Peer <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20211210090244.3c851b93aef5.I346fa2e1d79220a6770496e773c6f87a2ad9e6c4@changeid
Signed-off-by: Luca Coelho <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/intel/iwlwifi/mvm/scan.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/wireless/intel/iwlwifi/mvm/scan.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/scan.c
@@ -2157,7 +2157,7 @@ static int iwl_mvm_check_running_scans(s
return -EIO;
}
-#define SCAN_TIMEOUT 20000
+#define SCAN_TIMEOUT 30000
void iwl_mvm_scan_timeout_wk(struct work_struct *work)
{
From: Mauro Carvalho Chehab <[email protected]>
[ Upstream commit 87d6576ddf8ac25f36597bc93ca17f6628289c16 ]
The name of the package with ctexhook.sty is different on
Debian/Ubuntu.
Reported-by: Akira Yokosawa <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Tested-by: Akira Yokosawa <[email protected]>
Link: https://lore.kernel.org/r/63882425609a2820fac78f5e94620abeb7ed5f6f.1641429634.git.mchehab@kernel.org
Signed-off-by: Jonathan Corbet <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
scripts/sphinx-pre-install | 3 +++
1 file changed, 3 insertions(+)
diff --git a/scripts/sphinx-pre-install b/scripts/sphinx-pre-install
index 828a8615a9181..b32a20782c851 100755
--- a/scripts/sphinx-pre-install
+++ b/scripts/sphinx-pre-install
@@ -370,6 +370,9 @@ sub give_debian_hints()
);
if ($pdf) {
+ check_missing_file(["/usr/share/texlive/texmf-dist/tex/latex/ctex/ctexhook.sty"],
+ "texlive-lang-chinese", 2);
+
check_missing_file(["/usr/share/fonts/truetype/dejavu/DejaVuSans.ttf"],
"fonts-dejavu", 2);
--
2.34.1
From: Alexander Gordeev <[email protected]>
commit c2c224932fd0ee6854d6ebfc8d059c2bcad86606 upstream.
There is a race on concurrent 2KB-pgtables release paths when
both upper and lower halves of the containing parent page are
freed, one via page_table_free_rcu() + __tlb_remove_table(),
and the other via page_table_free(). The race might lead to a
corruption as result of remove of list item in page_table_free()
concurrently with __free_page() in __tlb_remove_table().
Let's assume first the lower and next the upper 2KB-pgtables are
freed from a page. Since both halves of the page are allocated
the tracking byte (bits 24-31 of the page _refcount) has value
of 0x03 initially:
CPU0 CPU1
---- ----
page_table_free_rcu() // lower half
{
// _refcount[31..24] == 0x03
...
atomic_xor_bits(&page->_refcount,
0x11U << (0 + 24));
// _refcount[31..24] <= 0x12
...
table = table | (1U << 0);
tlb_remove_table(tlb, table);
}
...
__tlb_remove_table()
{
// _refcount[31..24] == 0x12
mask = _table & 3;
// mask <= 0x01
...
page_table_free() // upper half
{
// _refcount[31..24] == 0x12
...
atomic_xor_bits(
&page->_refcount,
1U << (1 + 24));
// _refcount[31..24] <= 0x10
// mask <= 0x10
...
atomic_xor_bits(&page->_refcount,
mask << (4 + 24));
// _refcount[31..24] <= 0x00
// mask <= 0x00
...
if (mask != 0) // == false
break;
fallthrough;
...
if (mask & 3) // == false
...
else
__free_page(page); list_del(&page->lru);
^^^^^^^^^^^^^^^^^^ RACE! ^^^^^^^^^^^^^^^^^^^^^
} ...
}
The problem is page_table_free() releases the page as result of
lower nibble unset and __tlb_remove_table() observing zero too
early. With this update page_table_free() will use the similar
logic as page_table_free_rcu() + __tlb_remove_table(), and mark
the fragment as pending for removal in the upper nibble until
after the list_del().
In other words, the parent page is considered as unreferenced and
safe to release only when the lower nibble is cleared already and
unsetting a bit in upper nibble results in that nibble turned zero.
Cc: [email protected]
Suggested-by: Vlastimil Babka <[email protected]>
Reviewed-by: Gerald Schaefer <[email protected]>
Signed-off-by: Alexander Gordeev <[email protected]>
Signed-off-by: Heiko Carstens <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/s390/mm/pgalloc.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/arch/s390/mm/pgalloc.c
+++ b/arch/s390/mm/pgalloc.c
@@ -253,13 +253,15 @@ void page_table_free(struct mm_struct *m
/* Free 2K page table fragment of a 4K page */
bit = (__pa(table) & ~PAGE_MASK)/(PTRS_PER_PTE*sizeof(pte_t));
spin_lock_bh(&mm->context.lock);
- mask = atomic_xor_bits(&page->_refcount, 1U << (bit + 24));
+ mask = atomic_xor_bits(&page->_refcount, 0x11U << (bit + 24));
mask >>= 24;
if (mask & 3)
list_add(&page->lru, &mm->context.pgtable_list);
else
list_del(&page->lru);
spin_unlock_bh(&mm->context.lock);
+ mask = atomic_xor_bits(&page->_refcount, 0x10U << (bit + 24));
+ mask >>= 24;
if (mask != 0)
return;
} else {
From: John David Anglin <[email protected]>
[ Upstream commit 9e9d4b460f23bab61672eae397417d03917d116c ]
In handle_interruption(), we call faulthandler_disabled() to check whether the
fault handler is not disabled. If the fault handler is disabled, we immediately
call do_page_fault(). It then calls faulthandler_disabled(). If disabled,
do_page_fault() attempts to fixup the exception by jumping to no_context:
no_context:
if (!user_mode(regs) && fixup_exception(regs)) {
return;
}
parisc_terminate("Bad Address (null pointer deref?)", regs, code, address);
Apart from the error messages, the two blocks of code perform the same
function.
We can avoid two calls to faulthandler_disabled() by a simple revision
to the code in handle_interruption().
Note: I didn't try to fix the formatting of this code block.
Signed-off-by: John David Anglin <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/parisc/kernel/traps.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/parisc/kernel/traps.c b/arch/parisc/kernel/traps.c
index 43f56335759a4..269b737d26299 100644
--- a/arch/parisc/kernel/traps.c
+++ b/arch/parisc/kernel/traps.c
@@ -784,7 +784,7 @@ void notrace handle_interruption(int code, struct pt_regs *regs)
* unless pagefault_disable() was called before.
*/
- if (fault_space == 0 && !faulthandler_disabled())
+ if (faulthandler_disabled() || fault_space == 0)
{
/* Clean up and return if in exception table. */
if (fixup_exception(regs))
--
2.34.1
From: Paul Moore <[email protected]>
[ Upstream commit 8f110f530635af44fff1f4ee100ecef0bac62510 ]
Due to the audit control mutex necessary for serializing audit
userspace messages we haven't been able to block/penalize userspace
processes that attempt to send audit records while the system is
under audit pressure. The result is that privileged userspace
applications have a priority boost with respect to audit as they are
not bound by the same audit queue throttling as the other tasks on
the system.
This patch attempts to restore some balance to the system when under
audit pressure by blocking these privileged userspace tasks after
they have finished their audit processing, and dropped the audit
control mutex, but before they return to userspace.
Reported-by: Gaosheng Cui <[email protected]>
Tested-by: Gaosheng Cui <[email protected]>
Reviewed-by: Richard Guy Briggs <[email protected]>
Signed-off-by: Paul Moore <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/audit.c | 18 +++++++++++++++++-
1 file changed, 17 insertions(+), 1 deletion(-)
diff --git a/kernel/audit.c b/kernel/audit.c
index d784000921da3..2a38cbaf3ddb7 100644
--- a/kernel/audit.c
+++ b/kernel/audit.c
@@ -1540,6 +1540,20 @@ static void audit_receive(struct sk_buff *skb)
nlh = nlmsg_next(nlh, &len);
}
audit_ctl_unlock();
+
+ /* can't block with the ctrl lock, so penalize the sender now */
+ if (audit_backlog_limit &&
+ (skb_queue_len(&audit_queue) > audit_backlog_limit)) {
+ DECLARE_WAITQUEUE(wait, current);
+
+ /* wake kauditd to try and flush the queue */
+ wake_up_interruptible(&kauditd_wait);
+
+ add_wait_queue_exclusive(&audit_backlog_wait, &wait);
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ schedule_timeout(audit_backlog_wait_time);
+ remove_wait_queue(&audit_backlog_wait, &wait);
+ }
}
/* Log information about who is connecting to the audit multicast socket */
@@ -1824,7 +1838,9 @@ struct audit_buffer *audit_log_start(struct audit_context *ctx, gfp_t gfp_mask,
* task_tgid_vnr() since auditd_pid is set in audit_receive_msg()
* using a PID anchored in the caller's namespace
* 2. generator holding the audit_cmd_mutex - we don't want to block
- * while holding the mutex */
+ * while holding the mutex, although we do penalize the sender
+ * later in audit_receive() when it is safe to block
+ */
if (!(auditd_test_task(current) || audit_ctl_owner_current())) {
long stime = audit_backlog_wait_time;
--
2.34.1
From: Zekun Shen <[email protected]>
[ Upstream commit 6ce708f54cc8d73beca213cec66ede5ce100a781 ]
Large pkt_len can lead to out-out-bound memcpy. Current
ath9k_hif_usb_rx_stream allows combining the content of two urb
inputs to one pkt. The first input can indicate the size of the
pkt. Any remaining size is saved in hif_dev->rx_remain_len.
While processing the next input, memcpy is used with rx_remain_len.
4-byte pkt_len can go up to 0xffff, while a single input is 0x4000
maximum in size (MAX_RX_BUF_SIZE). Thus, the patch adds a check for
pkt_len which must not exceed 2 * MAX_RX_BUG_SIZE.
BUG: KASAN: slab-out-of-bounds in ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc]
Read of size 46393 at addr ffff888018798000 by task kworker/0:1/23
CPU: 0 PID: 23 Comm: kworker/0:1 Not tainted 5.6.0 #63
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS rel-1.10.2-0-g5f4c7b1-prebuilt.qemu-project.org 04/01/2014
Workqueue: events request_firmware_work_func
Call Trace:
<IRQ>
dump_stack+0x76/0xa0
print_address_description.constprop.0+0x16/0x200
? ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc]
? ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc]
__kasan_report.cold+0x37/0x7c
? ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc]
kasan_report+0xe/0x20
check_memory_region+0x15a/0x1d0
memcpy+0x20/0x50
ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc]
? hif_usb_mgmt_cb+0x2d9/0x2d9 [ath9k_htc]
? _raw_spin_lock_irqsave+0x7b/0xd0
? _raw_spin_trylock_bh+0x120/0x120
? __usb_unanchor_urb+0x12f/0x210
__usb_hcd_giveback_urb+0x1e4/0x380
usb_giveback_urb_bh+0x241/0x4f0
? __hrtimer_run_queues+0x316/0x740
? __usb_hcd_giveback_urb+0x380/0x380
tasklet_action_common.isra.0+0x135/0x330
__do_softirq+0x18c/0x634
irq_exit+0x114/0x140
smp_apic_timer_interrupt+0xde/0x380
apic_timer_interrupt+0xf/0x20
I found the bug using a custome USBFuzz port. It's a research work
to fuzz USB stack/drivers. I modified it to fuzz ath9k driver only,
providing hand-crafted usb descriptors to QEMU.
After fixing the value of pkt_tag to ATH_USB_RX_STREAM_MODE_TAG in QEMU
emulation, I found the KASAN report. The bug is triggerable whenever
pkt_len is above two MAX_RX_BUG_SIZE. I used the same input that crashes
to test the driver works when applying the patch.
Signed-off-by: Zekun Shen <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/ath9k/hif_usb.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c
index 860da13bfb6ac..f06eec99de688 100644
--- a/drivers/net/wireless/ath/ath9k/hif_usb.c
+++ b/drivers/net/wireless/ath/ath9k/hif_usb.c
@@ -590,6 +590,13 @@ static void ath9k_hif_usb_rx_stream(struct hif_device_usb *hif_dev,
return;
}
+ if (pkt_len > 2 * MAX_RX_BUF_SIZE) {
+ dev_err(&hif_dev->udev->dev,
+ "ath9k_htc: invalid pkt_len (%x)\n", pkt_len);
+ RX_STAT_INC(skb_dropped);
+ return;
+ }
+
pad_len = 4 - (pkt_len & 0x3);
if (pad_len == 4)
pad_len = 0;
--
2.34.1
From: Ryuta NAKANISHI <[email protected]>
[ Upstream commit 898c7a9ec81620125f2463714a0f4dea18ad6e54 ]
Similar to commit 4a90bbb478db ("phy: uniphier-pcie: Fix updating phy
parameters"), in function uniphier_u3ssphy_set_param(), unintentionally
write zeros to other fields when writing PHY registers.
Fixes: 5ab43d0f8697 ("phy: socionext: add USB3 PHY driver for UniPhier SoC")
Signed-off-by: Ryuta NAKANISHI <[email protected]>
Signed-off-by: Kunihiko Hayashi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/phy/socionext/phy-uniphier-usb3ss.c | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/drivers/phy/socionext/phy-uniphier-usb3ss.c b/drivers/phy/socionext/phy-uniphier-usb3ss.c
index 6700645bcbe6b..3b5ffc16a6947 100644
--- a/drivers/phy/socionext/phy-uniphier-usb3ss.c
+++ b/drivers/phy/socionext/phy-uniphier-usb3ss.c
@@ -22,11 +22,13 @@
#include <linux/reset.h>
#define SSPHY_TESTI 0x0
-#define SSPHY_TESTO 0x4
#define TESTI_DAT_MASK GENMASK(13, 6)
#define TESTI_ADR_MASK GENMASK(5, 1)
#define TESTI_WR_EN BIT(0)
+#define SSPHY_TESTO 0x4
+#define TESTO_DAT_MASK GENMASK(7, 0)
+
#define PHY_F(regno, msb, lsb) { (regno), (msb), (lsb) }
#define CDR_CPD_TRIM PHY_F(7, 3, 0) /* RxPLL charge pump current */
@@ -84,12 +86,12 @@ static void uniphier_u3ssphy_set_param(struct uniphier_u3ssphy_priv *priv,
val = FIELD_PREP(TESTI_DAT_MASK, 1);
val |= FIELD_PREP(TESTI_ADR_MASK, p->field.reg_no);
uniphier_u3ssphy_testio_write(priv, val);
- val = readl(priv->base + SSPHY_TESTO);
+ val = readl(priv->base + SSPHY_TESTO) & TESTO_DAT_MASK;
/* update value */
- val &= ~FIELD_PREP(TESTI_DAT_MASK, field_mask);
+ val &= ~field_mask;
data = field_mask & (p->value << p->field.lsb);
- val = FIELD_PREP(TESTI_DAT_MASK, data);
+ val = FIELD_PREP(TESTI_DAT_MASK, data | val);
val |= FIELD_PREP(TESTI_ADR_MASK, p->field.reg_no);
uniphier_u3ssphy_testio_write(priv, val);
uniphier_u3ssphy_testio_write(priv, val | TESTI_WR_EN);
--
2.34.1
From: Chunguang Xu <[email protected]>
commit 8c80fb312d7abf8bcd66cca1d843a80318a2c522 upstream.
We found on older kernel (3.10) that in the scenario of insufficient
disk space, system may trigger an ABBA deadlock problem, it seems that
this problem still exists in latest kernel, try to fix it here. The
main process triggered by this problem is that task A occupies the PA
and waits for the jbd2 transaction finish, the jbd2 transaction waits
for the completion of task B's IO (plug_list), but task B waits for
the release of PA by task A to finish discard, which indirectly forms
an ABBA deadlock. The related calltrace is as follows:
Task A
vfs_write
ext4_mb_new_blocks()
ext4_mb_mark_diskspace_used() JBD2
jbd2_journal_get_write_access() -> jbd2_journal_commit_transaction()
->schedule() filemap_fdatawait()
| |
| Task B |
| do_unlinkat() |
| ext4_evict_inode() |
| jbd2_journal_begin_ordered_truncate() |
| filemap_fdatawrite_range() |
| ext4_mb_new_blocks() |
-ext4_mb_discard_group_preallocations() <-----
Here, try to cancel ext4_mb_discard_group_preallocations() internal
retry due to PA busy, and do a limited number of retries inside
ext4_mb_discard_preallocations(), which can circumvent the above
problems, but also has some advantages:
1. Since the PA is in a busy state, if other groups have free PAs,
keeping the current PA may help to reduce fragmentation.
2. Continue to traverse forward instead of waiting for the current
group PA to be released. In most scenarios, the PA discard time
can be reduced.
However, in the case of smaller free space, if only a few groups have
space, then due to multiple traversals of the group, it may increase
CPU overhead. But in contrast, I feel that the overall benefit is
better than the cost.
Signed-off-by: Chunguang Xu <[email protected]>
Reported-by: kernel test robot <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/mballoc.c | 40 ++++++++++++++++++----------------------
1 file changed, 18 insertions(+), 22 deletions(-)
--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -4234,7 +4234,7 @@ ext4_mb_release_group_pa(struct ext4_bud
*/
static noinline_for_stack int
ext4_mb_discard_group_preallocations(struct super_block *sb,
- ext4_group_t group, int needed)
+ ext4_group_t group, int *busy)
{
struct ext4_group_info *grp = ext4_get_group_info(sb, group);
struct buffer_head *bitmap_bh = NULL;
@@ -4242,8 +4242,7 @@ ext4_mb_discard_group_preallocations(str
struct list_head list;
struct ext4_buddy e4b;
int err;
- int busy = 0;
- int free, free_total = 0;
+ int free = 0;
mb_debug(sb, "discard preallocation for group %u\n", group);
if (list_empty(&grp->bb_prealloc_list))
@@ -4266,19 +4265,14 @@ ext4_mb_discard_group_preallocations(str
goto out_dbg;
}
- if (needed == 0)
- needed = EXT4_CLUSTERS_PER_GROUP(sb) + 1;
-
INIT_LIST_HEAD(&list);
-repeat:
- free = 0;
ext4_lock_group(sb, group);
list_for_each_entry_safe(pa, tmp,
&grp->bb_prealloc_list, pa_group_list) {
spin_lock(&pa->pa_lock);
if (atomic_read(&pa->pa_count)) {
spin_unlock(&pa->pa_lock);
- busy = 1;
+ *busy = 1;
continue;
}
if (pa->pa_deleted) {
@@ -4318,22 +4312,13 @@ repeat:
call_rcu(&(pa)->u.pa_rcu, ext4_mb_pa_callback);
}
- free_total += free;
-
- /* if we still need more blocks and some PAs were used, try again */
- if (free_total < needed && busy) {
- ext4_unlock_group(sb, group);
- cond_resched();
- busy = 0;
- goto repeat;
- }
ext4_unlock_group(sb, group);
ext4_mb_unload_buddy(&e4b);
put_bh(bitmap_bh);
out_dbg:
mb_debug(sb, "discarded (%d) blocks preallocated for group %u bb_free (%d)\n",
- free_total, group, grp->bb_free);
- return free_total;
+ free, group, grp->bb_free);
+ return free;
}
/*
@@ -4875,13 +4860,24 @@ static int ext4_mb_discard_preallocation
{
ext4_group_t i, ngroups = ext4_get_groups_count(sb);
int ret;
- int freed = 0;
+ int freed = 0, busy = 0;
+ int retry = 0;
trace_ext4_mb_discard_preallocations(sb, needed);
+
+ if (needed == 0)
+ needed = EXT4_CLUSTERS_PER_GROUP(sb) + 1;
+ repeat:
for (i = 0; i < ngroups && needed > 0; i++) {
- ret = ext4_mb_discard_group_preallocations(sb, i, needed);
+ ret = ext4_mb_discard_group_preallocations(sb, i, &busy);
freed += ret;
needed -= ret;
+ cond_resched();
+ }
+
+ if (needed > 0 && busy && ++retry < 3) {
+ busy = 0;
+ goto repeat;
}
return freed;
From: Xin Yin <[email protected]>
commit 5e4d0eba1ccaf19f93222abdeda5a368be141785 upstream.
when call falloc with FALLOC_FL_ZERO_RANGE, to set an range to unwritten,
which has been already initialized. If the range is align to blocksize,
fast commit will not track range for this change.
Also track range for unwritten range in ext4_map_blocks().
Signed-off-by: Xin Yin <[email protected]>
Reviewed-by: Harshad Shirwadkar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/extents.c | 2 --
fs/ext4/inode.c | 7 ++++---
2 files changed, 4 insertions(+), 5 deletions(-)
--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -4638,8 +4638,6 @@ static long ext4_zero_range(struct file
ret = ext4_mark_inode_dirty(handle, inode);
if (unlikely(ret))
goto out_handle;
- ext4_fc_track_range(handle, inode, offset >> inode->i_sb->s_blocksize_bits,
- (offset + len - 1) >> inode->i_sb->s_blocksize_bits);
/* Zero out partial block at the edges of the range */
ret = ext4_zero_partial_blocks(handle, inode, offset, len);
if (ret >= 0)
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -741,10 +741,11 @@ out_sem:
if (ret)
return ret;
}
- ext4_fc_track_range(handle, inode, map->m_lblk,
- map->m_lblk + map->m_len - 1);
}
-
+ if (retval > 0 && (map->m_flags & EXT4_MAP_UNWRITTEN ||
+ map->m_flags & EXT4_MAP_MAPPED))
+ ext4_fc_track_range(handle, inode, map->m_lblk,
+ map->m_lblk + map->m_len - 1);
if (retval < 0)
ext_debug(inode, "failed with err %d\n", retval);
return retval;
From: Eric Dumazet <[email protected]>
[ Upstream commit 44073187990d5629804ce0627525f6ea5cfef171 ]
It seems pretty clear ppp layer assumed user space
would always be kind to provide enough data
in their write() to a ppp device.
This patch makes sure user provides at least
2 bytes.
It adds PPP_PROTO_LEN macro that could replace
in net-next many occurrences of hard-coded 2 value.
I replaced only one occurrence to ease backports
to stable kernels.
The bug manifests in the following report:
BUG: KMSAN: uninit-value in ppp_send_frame+0x28d/0x27c0 drivers/net/ppp/ppp_generic.c:1740
ppp_send_frame+0x28d/0x27c0 drivers/net/ppp/ppp_generic.c:1740
__ppp_xmit_process+0x23e/0x4b0 drivers/net/ppp/ppp_generic.c:1640
ppp_xmit_process+0x1fe/0x480 drivers/net/ppp/ppp_generic.c:1661
ppp_write+0x5cb/0x5e0 drivers/net/ppp/ppp_generic.c:513
do_iter_write+0xb0c/0x1500 fs/read_write.c:853
vfs_writev fs/read_write.c:924 [inline]
do_writev+0x645/0xe00 fs/read_write.c:967
__do_sys_writev fs/read_write.c:1040 [inline]
__se_sys_writev fs/read_write.c:1037 [inline]
__x64_sys_writev+0xe5/0x120 fs/read_write.c:1037
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x44/0xae
Uninit was created at:
slab_post_alloc_hook mm/slab.h:524 [inline]
slab_alloc_node mm/slub.c:3251 [inline]
__kmalloc_node_track_caller+0xe0c/0x1510 mm/slub.c:4974
kmalloc_reserve net/core/skbuff.c:354 [inline]
__alloc_skb+0x545/0xf90 net/core/skbuff.c:426
alloc_skb include/linux/skbuff.h:1126 [inline]
ppp_write+0x11d/0x5e0 drivers/net/ppp/ppp_generic.c:501
do_iter_write+0xb0c/0x1500 fs/read_write.c:853
vfs_writev fs/read_write.c:924 [inline]
do_writev+0x645/0xe00 fs/read_write.c:967
__do_sys_writev fs/read_write.c:1040 [inline]
__se_sys_writev fs/read_write.c:1037 [inline]
__x64_sys_writev+0xe5/0x120 fs/read_write.c:1037
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x44/0xae
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: [email protected]
Reported-by: syzbot <[email protected]>
Acked-by: Guillaume Nault <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ppp/ppp_generic.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ppp/ppp_generic.c b/drivers/net/ppp/ppp_generic.c
index 33b2e0fb68bbb..2b9815ec4a622 100644
--- a/drivers/net/ppp/ppp_generic.c
+++ b/drivers/net/ppp/ppp_generic.c
@@ -69,6 +69,8 @@
#define MPHDRLEN 6 /* multilink protocol header length */
#define MPHDRLEN_SSN 4 /* ditto with short sequence numbers */
+#define PPP_PROTO_LEN 2
+
/*
* An instance of /dev/ppp can be associated with either a ppp
* interface unit or a ppp channel. In both cases, file->private_data
@@ -496,6 +498,9 @@ static ssize_t ppp_write(struct file *file, const char __user *buf,
if (!pf)
return -ENXIO;
+ /* All PPP packets should start with the 2-byte protocol */
+ if (count < PPP_PROTO_LEN)
+ return -EINVAL;
ret = -ENOMEM;
skb = alloc_skb(count + pf->hdrlen, GFP_KERNEL);
if (!skb)
@@ -1632,7 +1637,7 @@ ppp_send_frame(struct ppp *ppp, struct sk_buff *skb)
}
++ppp->stats64.tx_packets;
- ppp->stats64.tx_bytes += skb->len - 2;
+ ppp->stats64.tx_bytes += skb->len - PPP_PROTO_LEN;
switch (proto) {
case PPP_IP:
--
2.34.1
From: Theodore Ts'o <[email protected]>
commit 6eeaf88fd586f05aaf1d48cb3a139d2a5c6eb055 upstream.
We probably want to remove the indirect block to extents migration
feature after a deprecation window, but until then, let's fix a
potential data loss problem caused by the fact that we put the
tmp_inode on the orphan list. In the unlikely case where we crash and
do a journal recovery, the data blocks belonging to the inode being
migrated are also represented in the tmp_inode on the orphan list ---
and so its data blocks will get marked unallocated, and available for
reuse.
Instead, stop putting the tmp_inode on the oprhan list. So in the
case where we crash while migrating the inode, we'll leak an inode,
which is not a disaster. It will be easily fixed the next time we run
fsck, and it's better than potentially having blocks getting claimed
by two different files, and losing data as a result.
Signed-off-by: Theodore Ts'o <[email protected]>
Reviewed-by: Lukas Czerner <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/migrate.c | 19 ++++---------------
1 file changed, 4 insertions(+), 15 deletions(-)
--- a/fs/ext4/migrate.c
+++ b/fs/ext4/migrate.c
@@ -437,12 +437,12 @@ int ext4_ext_migrate(struct inode *inode
percpu_down_write(&sbi->s_writepages_rwsem);
/*
- * Worst case we can touch the allocation bitmaps, a bgd
- * block, and a block to link in the orphan list. We do need
- * need to worry about credits for modifying the quota inode.
+ * Worst case we can touch the allocation bitmaps and a block
+ * group descriptor block. We do need need to worry about
+ * credits for modifying the quota inode.
*/
handle = ext4_journal_start(inode, EXT4_HT_MIGRATE,
- 4 + EXT4_MAXQUOTAS_TRANS_BLOCKS(inode->i_sb));
+ 3 + EXT4_MAXQUOTAS_TRANS_BLOCKS(inode->i_sb));
if (IS_ERR(handle)) {
retval = PTR_ERR(handle);
@@ -463,10 +463,6 @@ int ext4_ext_migrate(struct inode *inode
* Use the correct seed for checksum (i.e. the seed from 'inode'). This
* is so that the metadata blocks will have the correct checksum after
* the migration.
- *
- * Note however that, if a crash occurs during the migration process,
- * the recovery process is broken because the tmp_inode checksums will
- * be wrong and the orphans cleanup will fail.
*/
ei = EXT4_I(inode);
EXT4_I(tmp_inode)->i_csum_seed = ei->i_csum_seed;
@@ -478,7 +474,6 @@ int ext4_ext_migrate(struct inode *inode
clear_nlink(tmp_inode);
ext4_ext_tree_init(handle, tmp_inode);
- ext4_orphan_add(handle, tmp_inode);
ext4_journal_stop(handle);
/*
@@ -503,12 +498,6 @@ int ext4_ext_migrate(struct inode *inode
handle = ext4_journal_start(inode, EXT4_HT_MIGRATE, 1);
if (IS_ERR(handle)) {
- /*
- * It is impossible to update on-disk structures without
- * a handle, so just rollback in-core changes and live other
- * work to orphan_list_cleanup()
- */
- ext4_orphan_del(NULL, tmp_inode);
retval = PTR_ERR(handle);
goto out_tmp_inode;
}
From: Xin Yin <[email protected]>
commit 0b5b5a62b945a141e64011b2f90ee7e46f14be98 upstream.
For now ,we use ext4_punch_hole() during fast commit replay delete range
procedure. But it will be affected by inode->i_size, which may not
correct during fast commit replay procedure. The following test will
failed.
-create & write foo (len 1000K)
-falloc FALLOC_FL_ZERO_RANGE foo (range 400K - 600K)
-create & fsync bar
-falloc FALLOC_FL_PUNCH_HOLE foo (range 300K-500K)
-fsync foo
-crash before a full commit
After the fast_commit reply procedure, the range 400K-500K will not be
removed. Because in this case, when calling ext4_punch_hole() the
inode->i_size is 0, and it just retruns with doing nothing.
Change to use ext4_ext_remove_space() instead of ext4_punch_hole()
to remove blocks of inode directly.
Signed-off-by: Xin Yin <[email protected]>
Reviewed-by: Harshad Shirwadkar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/fast_commit.c | 13 ++++++++-----
1 file changed, 8 insertions(+), 5 deletions(-)
--- a/fs/ext4/fast_commit.c
+++ b/fs/ext4/fast_commit.c
@@ -1764,11 +1764,14 @@ ext4_fc_replay_del_range(struct super_bl
}
}
- ret = ext4_punch_hole(inode,
- le32_to_cpu(lrange.fc_lblk) << sb->s_blocksize_bits,
- le32_to_cpu(lrange.fc_len) << sb->s_blocksize_bits);
- if (ret)
- jbd_debug(1, "ext4_punch_hole returned %d", ret);
+ down_write(&EXT4_I(inode)->i_data_sem);
+ ret = ext4_ext_remove_space(inode, lrange.fc_lblk,
+ lrange.fc_lblk + lrange.fc_len - 1);
+ up_write(&EXT4_I(inode)->i_data_sem);
+ if (ret) {
+ iput(inode);
+ return 0;
+ }
ext4_ext_replay_shrink_inode(inode,
i_size_read(inode) >> sb->s_blocksize_bits);
ext4_mark_inode_dirty(NULL, inode);
From: Luís Henriques <[email protected]>
commit e81c9302a6c3c008f5c30beb73b38adb0170ff2d upstream.
When migrating to extents, the temporary inode will have it's own checksum
seed. This means that, when swapping the inodes data, the inode checksums
will be incorrect.
This can be fixed by recalculating the extents checksums again. Or simply
by copying the seed into the temporary inode.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=213357
Reported-by: Jeroen van Wolffelaar <[email protected]>
Signed-off-by: Luís Henriques <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/migrate.c | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)
--- a/fs/ext4/migrate.c
+++ b/fs/ext4/migrate.c
@@ -459,6 +459,17 @@ int ext4_ext_migrate(struct inode *inode
ext4_journal_stop(handle);
goto out_unlock;
}
+ /*
+ * Use the correct seed for checksum (i.e. the seed from 'inode'). This
+ * is so that the metadata blocks will have the correct checksum after
+ * the migration.
+ *
+ * Note however that, if a crash occurs during the migration process,
+ * the recovery process is broken because the tmp_inode checksums will
+ * be wrong and the orphans cleanup will fail.
+ */
+ ei = EXT4_I(inode);
+ EXT4_I(tmp_inode)->i_csum_seed = ei->i_csum_seed;
i_size_write(tmp_inode, i_size_read(inode));
/*
* Set the i_nlink to zero so it will be deleted later
@@ -502,7 +513,6 @@ int ext4_ext_migrate(struct inode *inode
goto out_tmp_inode;
}
- ei = EXT4_I(inode);
i_data = ei->i_data;
memset(&lb, 0, sizeof(lb));
From: Russell King (Oracle) <[email protected]>
[ Upstream commit f22725c95ececb703c3f741e8f946d23705630b7 ]
Corentin Labbe reports that the SSI 1328 does not work when allowing
the PHY to operate at gigabit speeds, but does work with the generic
PHY driver.
This appears to be because m88e1118_config_init() writes a fixed value
to the MSCR register, claiming that this is to enable 1G speeds.
However, this always sets bits 4 and 5, enabling RGMII transmit and
receive delays. The suspicion is that the original board this was
added for required the delays to make 1G speeds work.
Add the necessary configuration for RGMII delays for the 88E1118 to
bring this into line with the requirements for RGMII support, and thus
make the SSI 1328 work.
Corentin Labbe has tested this on gemini-ssi1328 and gemini-ns2502.
Reported-by: Corentin Labbe <[email protected]>
Tested-by: Corentin Labbe <[email protected]>
Signed-off-by: Russell King (Oracle) <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/phy/marvell.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index 91616182c311f..4dda2ab19c265 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -1090,6 +1090,12 @@ static int m88e1118_config_init(struct phy_device *phydev)
if (err < 0)
return err;
+ if (phy_interface_is_rgmii(phydev)) {
+ err = m88e1121_config_aneg_rgmii_delays(phydev);
+ if (err < 0)
+ return err;
+ }
+
/* Adjust LED Control */
if (phydev->dev_flags & MARVELL_PHY_M1118_DNS323_LEDS)
err = phy_write(phydev, 0x10, 0x1100);
--
2.34.1
From: Daniel Thompson <[email protected]>
commit c61d7b2ef141abf81140756b45860a2306f395a2 upstream.
Currently the documentation states that channels must be configured before
running the dmatest. This has not been true since commit 6b41030fdc79
("dmaengine: dmatest: Restore default for channel"). Fix accordingly.
Fixes: 6b41030fdc79 ("dmaengine: dmatest: Restore default for channel")
Signed-off-by: Daniel Thompson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
Documentation/driver-api/dmaengine/dmatest.rst | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
--- a/Documentation/driver-api/dmaengine/dmatest.rst
+++ b/Documentation/driver-api/dmaengine/dmatest.rst
@@ -143,13 +143,14 @@ Part 5 - Handling channel allocation
Allocating Channels
-------------------
-Channels are required to be configured prior to starting the test run.
-Attempting to run the test without configuring the channels will fail.
+Channels do not need to be configured prior to starting a test run. Attempting
+to run the test without configuring the channels will result in testing any
+channels that are available.
Example::
% echo 1 > /sys/module/dmatest/parameters/run
- dmatest: Could not start test, no channels configured
+ dmatest: No channels configured, continue with any
Channels are registered using the "channel" parameter. Channels can be requested by their
name, once requested, the channel is registered and a pending thread is added to the test list.
From: Pali Rohár <[email protected]>
commit 7b067ac63a5730d2fae18399fed7e45f23d36912 upstream.
Some bits in PCI config space are reserved when device is PCIe. Properly
define behavior of PCI registers for PCIe emulated bridge and ensure that
it would not be possible change these reserved bits.
Link: https://lore.kernel.org/r/[email protected]
Fixes: 23a5fba4d941 ("PCI: Introduce PCI bridge emulated config space common logic")
Signed-off-by: Pali Rohár <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/pci-bridge-emul.c | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
--- a/drivers/pci/pci-bridge-emul.c
+++ b/drivers/pci/pci-bridge-emul.c
@@ -295,6 +295,27 @@ int pci_bridge_emul_init(struct pci_brid
kfree(bridge->pci_regs_behavior);
return -ENOMEM;
}
+ /* These bits are applicable only for PCI and reserved on PCIe */
+ bridge->pci_regs_behavior[PCI_CACHE_LINE_SIZE / 4].ro &=
+ ~GENMASK(15, 8);
+ bridge->pci_regs_behavior[PCI_COMMAND / 4].ro &=
+ ~((PCI_COMMAND_SPECIAL | PCI_COMMAND_INVALIDATE |
+ PCI_COMMAND_VGA_PALETTE | PCI_COMMAND_WAIT |
+ PCI_COMMAND_FAST_BACK) |
+ (PCI_STATUS_66MHZ | PCI_STATUS_FAST_BACK |
+ PCI_STATUS_DEVSEL_MASK) << 16);
+ bridge->pci_regs_behavior[PCI_PRIMARY_BUS / 4].ro &=
+ ~GENMASK(31, 24);
+ bridge->pci_regs_behavior[PCI_IO_BASE / 4].ro &=
+ ~((PCI_STATUS_66MHZ | PCI_STATUS_FAST_BACK |
+ PCI_STATUS_DEVSEL_MASK) << 16);
+ bridge->pci_regs_behavior[PCI_INTERRUPT_LINE / 4].rw &=
+ ~((PCI_BRIDGE_CTL_MASTER_ABORT |
+ BIT(8) | BIT(9) | BIT(11)) << 16);
+ bridge->pci_regs_behavior[PCI_INTERRUPT_LINE / 4].ro &=
+ ~((PCI_BRIDGE_CTL_FAST_BACK) << 16);
+ bridge->pci_regs_behavior[PCI_INTERRUPT_LINE / 4].w1c &=
+ ~(BIT(10) << 16);
}
if (flags & PCI_BRIDGE_EMUL_NO_PREFETCHABLE_BAR) {
From: German Gomez <[email protected]>
commit 3606c0e1a1050d397ad759a62607e419fd8b0ccb upstream.
A previous patch preventing "attr->sample_period" values from being
overridden in pfm events changed a related behaviour in arm-spe.
Before said patch:
perf record -c 10000 -e arm_spe_0// -- sleep 1
Would yield an SPE event with period=10000. After the patch, the period
in "-c 10000" was being ignored because the arm-spe code initializes
sample_period to a non-zero value.
This patch restores the previous behaviour for non-libpfm4 events.
Fixes: ae5dcc8abe31 (“perf record: Prevent override of attr->sample_period for libpfm4 events”)
Reported-by: Chase Conklin <[email protected]>
Signed-off-by: German Gomez <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Fastabend <[email protected]>
Cc: KP Singh <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Martin KaFai Lau <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Yonghong Song <[email protected]>
Cc: [email protected]
Cc: [email protected]
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/perf/util/evsel.c | 25 +++++++++++++++++--------
1 file changed, 17 insertions(+), 8 deletions(-)
--- a/tools/perf/util/evsel.c
+++ b/tools/perf/util/evsel.c
@@ -1014,6 +1014,17 @@ struct evsel_config_term *__evsel__get_c
return found_term;
}
+static void evsel__set_default_freq_period(struct record_opts *opts,
+ struct perf_event_attr *attr)
+{
+ if (opts->freq) {
+ attr->freq = 1;
+ attr->sample_freq = opts->freq;
+ } else {
+ attr->sample_period = opts->default_interval;
+ }
+}
+
/*
* The enable_on_exec/disabled value strategy:
*
@@ -1080,14 +1091,12 @@ void evsel__config(struct evsel *evsel,
* We default some events to have a default interval. But keep
* it a weak assumption overridable by the user.
*/
- if (!attr->sample_period) {
- if (opts->freq) {
- attr->freq = 1;
- attr->sample_freq = opts->freq;
- } else {
- attr->sample_period = opts->default_interval;
- }
- }
+ if ((evsel->is_libpfm_event && !attr->sample_period) ||
+ (!evsel->is_libpfm_event && (!attr->sample_period ||
+ opts->user_freq != UINT_MAX ||
+ opts->user_interval != ULLONG_MAX)))
+ evsel__set_default_freq_period(opts, attr);
+
/*
* If attr->freq was set (here or earlier), ask for period
* to be sampled.
From: Quentin Monnet <[email protected]>
commit 48f5aef4c458c19ab337eed8c95a6486cc014aa3 upstream.
Bpftool's Makefile, and the Makefile for its documentation, both include
scripts/utilities.mak, but they use none of the items defined in this
file. Remove the includes.
Fixes: 71bb428fe2c1 ("tools: bpf: add bpftool")
Signed-off-by: Quentin Monnet <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/bpf/bpftool/Documentation/Makefile | 1 -
tools/bpf/bpftool/Makefile | 1 -
2 files changed, 2 deletions(-)
--- a/tools/bpf/bpftool/Documentation/Makefile
+++ b/tools/bpf/bpftool/Documentation/Makefile
@@ -1,6 +1,5 @@
# SPDX-License-Identifier: GPL-2.0-only
include ../../../scripts/Makefile.include
-include ../../../scripts/utilities.mak
INSTALL ?= install
RM ?= rm -f
--- a/tools/bpf/bpftool/Makefile
+++ b/tools/bpf/bpftool/Makefile
@@ -1,6 +1,5 @@
# SPDX-License-Identifier: GPL-2.0-only
include ../../scripts/Makefile.include
-include ../../scripts/utilities.mak
ifeq ($(srctree),)
srctree := $(patsubst %/,%,$(dir $(CURDIR)))
From: Josef Bacik <[email protected]>
[ Upstream commit 9f05c09d6baef789726346397438cca4ec43c3ee ]
If we're looking for leafs that point to a data extent we want to record
the extent items that point at our bytenr. At this point we have the
reference and we know for a fact that this leaf should have a reference
to our bytenr. However if there's some sort of corruption we may not
find any references to our leaf, and thus could end up with eie == NULL.
Replace this BUG_ON() with an ASSERT() and then return -EUCLEAN for the
mortals.
Signed-off-by: Josef Bacik <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/btrfs/backref.c | 14 +++++++++++---
1 file changed, 11 insertions(+), 3 deletions(-)
diff --git a/fs/btrfs/backref.c b/fs/btrfs/backref.c
index 8b471579e26e1..baff31a147e7d 100644
--- a/fs/btrfs/backref.c
+++ b/fs/btrfs/backref.c
@@ -1366,10 +1366,18 @@ again:
goto out;
if (!ret && extent_item_pos) {
/*
- * we've recorded that parent, so we must extend
- * its inode list here
+ * We've recorded that parent, so we must extend
+ * its inode list here.
+ *
+ * However if there was corruption we may not
+ * have found an eie, return an error in this
+ * case.
*/
- BUG_ON(!eie);
+ ASSERT(eie);
+ if (!eie) {
+ ret = -EUCLEAN;
+ goto out;
+ }
while (eie->next)
eie = eie->next;
eie->next = ref->inode_list;
--
2.34.1
From: Baruch Siach <[email protected]>
commit 5d05b811b5acb92fc581a7b328b36646c86f5ab9 upstream.
The cells_name field of of_phandle_iterator might be NULL. Use the
phandle name instead. With this change instead of:
OF: /soc/pinctrl@1000000: (null) = 3 found 2
We get:
OF: /soc/pinctrl@1000000: phandle pinctrl@1000000 needs 3, found 2
Which is a more helpful messages making DT debugging easier.
In this particular example the phandle name looks like duplicate of the
same node name. But note that the first node is the parent node
(it->parent), while the second is the phandle target (it->node). They
happen to be the same in the case that triggered this improvement. See
commit 72cb4c48a46a ("arm64: dts: qcom: ipq6018: Fix gpio-ranges
property").
Signed-off-by: Baruch Siach <[email protected]>
Signed-off-by: Rob Herring <[email protected]>
Link: https://lore.kernel.org/r/f6a68e0088a552ea9dfd4d8e3b5b586d92594738.1640881913.git.baruch@tkos.co.il
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/of/base.c | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@@ -1328,9 +1328,14 @@ int of_phandle_iterator_next(struct of_p
* property data length
*/
if (it->cur + count > it->list_end) {
- pr_err("%pOF: %s = %d found %td\n",
- it->parent, it->cells_name,
- count, it->list_end - it->cur);
+ if (it->cells_name)
+ pr_err("%pOF: %s = %d found %td\n",
+ it->parent, it->cells_name,
+ count, it->list_end - it->cur);
+ else
+ pr_err("%pOF: phandle %s needs %d, found %td\n",
+ it->parent, of_node_full_name(it->node),
+ count, it->list_end - it->cur);
goto err;
}
}
From: Danielle Ratson <[email protected]>
[ Upstream commit d43e4271747ace01a27a49a97a397cb4219f6487 ]
Locally generated packets ingress the device through its CPU port. When
the CPU port is congested and there are not enough credits in its
headroom buffer, packets can be dropped.
While this might be acceptable for data packets that traverse the
network, configuration packets exchanged between the host and the device
(EMADs) should not be subjected to this flow control.
The "sdq_lp" bit in the SDQ (Send Descriptor Queue) context allows the
host to instruct the device to treat packets sent on this queue as
"local processing" and always process them, regardless of the state of
the CPU port's headroom.
Add the definition of this bit and set it for the dedicated SDQ reserved
for the transmission of EMAD packets. This makes the "local processing"
bit in the WQE (Work Queue Element) redundant, so clear it.
Signed-off-by: Danielle Ratson <[email protected]>
Signed-off-by: Ido Schimmel <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/mellanox/mlxsw/cmd.h | 12 ++++++++++++
drivers/net/ethernet/mellanox/mlxsw/pci.c | 6 +++++-
2 files changed, 17 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/mellanox/mlxsw/cmd.h b/drivers/net/ethernet/mellanox/mlxsw/cmd.h
index 5ffdfb532cb7f..91f68fb0b420a 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/cmd.h
+++ b/drivers/net/ethernet/mellanox/mlxsw/cmd.h
@@ -905,6 +905,18 @@ static inline int mlxsw_cmd_sw2hw_rdq(struct mlxsw_core *mlxsw_core,
*/
MLXSW_ITEM32(cmd_mbox, sw2hw_dq, cq, 0x00, 24, 8);
+enum mlxsw_cmd_mbox_sw2hw_dq_sdq_lp {
+ MLXSW_CMD_MBOX_SW2HW_DQ_SDQ_LP_WQE,
+ MLXSW_CMD_MBOX_SW2HW_DQ_SDQ_LP_IGNORE_WQE,
+};
+
+/* cmd_mbox_sw2hw_dq_sdq_lp
+ * SDQ local Processing
+ * 0: local processing by wqe.lp
+ * 1: local processing (ignoring wqe.lp)
+ */
+MLXSW_ITEM32(cmd_mbox, sw2hw_dq, sdq_lp, 0x00, 23, 1);
+
/* cmd_mbox_sw2hw_dq_sdq_tclass
* SDQ: CPU Egress TClass
* RDQ: Reserved
diff --git a/drivers/net/ethernet/mellanox/mlxsw/pci.c b/drivers/net/ethernet/mellanox/mlxsw/pci.c
index 72d5c77bcb949..dbb16ce25bdf3 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/pci.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/pci.c
@@ -285,6 +285,7 @@ static int mlxsw_pci_sdq_init(struct mlxsw_pci *mlxsw_pci, char *mbox,
struct mlxsw_pci_queue *q)
{
int tclass;
+ int lp;
int i;
int err;
@@ -292,9 +293,12 @@ static int mlxsw_pci_sdq_init(struct mlxsw_pci *mlxsw_pci, char *mbox,
q->consumer_counter = 0;
tclass = q->num == MLXSW_PCI_SDQ_EMAD_INDEX ? MLXSW_PCI_SDQ_EMAD_TC :
MLXSW_PCI_SDQ_CTL_TC;
+ lp = q->num == MLXSW_PCI_SDQ_EMAD_INDEX ? MLXSW_CMD_MBOX_SW2HW_DQ_SDQ_LP_IGNORE_WQE :
+ MLXSW_CMD_MBOX_SW2HW_DQ_SDQ_LP_WQE;
/* Set CQ of same number of this SDQ. */
mlxsw_cmd_mbox_sw2hw_dq_cq_set(mbox, q->num);
+ mlxsw_cmd_mbox_sw2hw_dq_sdq_lp_set(mbox, lp);
mlxsw_cmd_mbox_sw2hw_dq_sdq_tclass_set(mbox, tclass);
mlxsw_cmd_mbox_sw2hw_dq_log2_dq_sz_set(mbox, 3); /* 8 pages */
for (i = 0; i < MLXSW_PCI_AQ_PAGES; i++) {
@@ -1599,7 +1603,7 @@ static int mlxsw_pci_skb_transmit(void *bus_priv, struct sk_buff *skb,
wqe = elem_info->elem;
mlxsw_pci_wqe_c_set(wqe, 1); /* always report completion */
- mlxsw_pci_wqe_lp_set(wqe, !!tx_info->is_emad);
+ mlxsw_pci_wqe_lp_set(wqe, 0);
mlxsw_pci_wqe_type_set(wqe, MLXSW_PCI_WQE_TYPE_ETHERNET);
err = mlxsw_pci_wqe_frag_map(mlxsw_pci, wqe, 0, skb->data,
--
2.34.1
From: Suresh Udipi <[email protected]>
commit 549cc89cd09a85aaa16dc07ef3db811d5cf9bcb1 upstream.
PHTW register is selected based on default bit rate from Table[1].
for the bit rates less than or equal to 250. Currently first
value of default bit rate which is greater than or equal to
the caculated mbps is selected. This selection can be further
improved by selecting the default bit rate which is nearest to
the calculated value.
[1] specs r19uh0105ej0200-r-car-3rd-generation.pdf [Table 25.12]
Fixes: 769afd212b16 ("media: rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver driver")
Signed-off-by: Suresh Udipi <[email protected]>
Signed-off-by: Michael Rodin <[email protected]>
Reviewed-by: Niklas Söderlund <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/platform/rcar-vin/rcar-csi2.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
--- a/drivers/media/platform/rcar-vin/rcar-csi2.c
+++ b/drivers/media/platform/rcar-vin/rcar-csi2.c
@@ -976,10 +976,17 @@ static int rcsi2_phtw_write_mbps(struct
const struct rcsi2_mbps_reg *values, u16 code)
{
const struct rcsi2_mbps_reg *value;
+ const struct rcsi2_mbps_reg *prev_value = NULL;
- for (value = values; value->mbps; value++)
+ for (value = values; value->mbps; value++) {
if (value->mbps >= mbps)
break;
+ prev_value = value;
+ }
+
+ if (prev_value &&
+ ((mbps - prev_value->mbps) <= (value->mbps - mbps)))
+ value = prev_value;
if (!value->mbps) {
dev_err(priv->dev, "Unsupported PHY speed (%u Mbps)", mbps);
From: Marc Kleine-Budde <[email protected]>
commit 99e7cc3b3f85d9a583ab83f386315c59443509ae upstream.
This patch fixes a typo in the error message in
mcp251xfd_tef_obj_read(), if trying to read too many objects.
Link: https://lore.kernel.org/all/[email protected]
Fixes: 55e5b97f003e ("can: mcp25xxfd: add driver for Microchip MCP25xxFD SPI CAN")
Signed-off-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c
+++ b/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c
@@ -1288,7 +1288,7 @@ mcp251xfd_tef_obj_read(const struct mcp2
len > tx_ring->obj_num ||
offset + len > tx_ring->obj_num)) {
netdev_err(priv->ndev,
- "Trying to read to many TEF objects (max=%d, offset=%d, len=%d).\n",
+ "Trying to read too many TEF objects (max=%d, offset=%d, len=%d).\n",
tx_ring->obj_num, offset, len);
return -ERANGE;
}
From: Borislav Petkov <[email protected]>
[ Upstream commit b4813539d37fa31fed62cdfab7bd2dd8929c5b2e ]
It is called by the #MC handler which is noinstr.
Fixes
vmlinux.o: warning: objtool: do_machine_check()+0xbd6: call to memset() leaves .noinstr.text section
Signed-off-by: Borislav Petkov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/kernel/cpu/mce/core.c | 14 +++++++++++---
1 file changed, 11 insertions(+), 3 deletions(-)
diff --git a/arch/x86/kernel/cpu/mce/core.c b/arch/x86/kernel/cpu/mce/core.c
index 64d8a96a2bf1e..2a608f0819765 100644
--- a/arch/x86/kernel/cpu/mce/core.c
+++ b/arch/x86/kernel/cpu/mce/core.c
@@ -1070,10 +1070,13 @@ static int mce_start(int *no_way_out)
* Synchronize between CPUs after main scanning loop.
* This invokes the bulk of the Monarch processing.
*/
-static int mce_end(int order)
+static noinstr int mce_end(int order)
{
- int ret = -1;
u64 timeout = (u64)mca_cfg.monarch_timeout * NSEC_PER_USEC;
+ int ret = -1;
+
+ /* Allow instrumentation around external facilities. */
+ instrumentation_begin();
if (!timeout)
goto reset;
@@ -1117,7 +1120,8 @@ static int mce_end(int order)
/*
* Don't reset anything. That's done by the Monarch.
*/
- return 0;
+ ret = 0;
+ goto out;
}
/*
@@ -1132,6 +1136,10 @@ reset:
* Let others run again.
*/
atomic_set(&mce_executing, 0);
+
+out:
+ instrumentation_end();
+
return ret;
}
--
2.34.1
From: Filipe Manana <[email protected]>
commit 232796df8c1437c41d308d161007f0715bac0a54 upstream.
When enabling quotas, we attempt to commit a transaction while holding the
mutex fs_info->qgroup_ioctl_lock. This can result on a deadlock with other
quota operations such as:
- qgroup creation and deletion, ioctl BTRFS_IOC_QGROUP_CREATE;
- adding and removing qgroup relations, ioctl BTRFS_IOC_QGROUP_ASSIGN.
This is because these operations join a transaction and after that they
attempt to lock the mutex fs_info->qgroup_ioctl_lock. Acquiring that mutex
after joining or starting a transaction is a pattern followed everywhere
in qgroups, so the quota enablement operation is the one at fault here,
and should not commit a transaction while holding that mutex.
Fix this by making the transaction commit while not holding the mutex.
We are safe from two concurrent tasks trying to enable quotas because
we are serialized by the rw semaphore fs_info->subvol_sem at
btrfs_ioctl_quota_ctl(), which is the only call site for enabling
quotas.
When this deadlock happens, it produces a trace like the following:
INFO: task syz-executor:25604 blocked for more than 143 seconds.
Not tainted 5.15.0-rc6 #4
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:syz-executor state:D stack:24800 pid:25604 ppid: 24873 flags:0x00004004
Call Trace:
context_switch kernel/sched/core.c:4940 [inline]
__schedule+0xcd9/0x2530 kernel/sched/core.c:6287
schedule+0xd3/0x270 kernel/sched/core.c:6366
btrfs_commit_transaction+0x994/0x2e90 fs/btrfs/transaction.c:2201
btrfs_quota_enable+0x95c/0x1790 fs/btrfs/qgroup.c:1120
btrfs_ioctl_quota_ctl fs/btrfs/ioctl.c:4229 [inline]
btrfs_ioctl+0x637e/0x7b70 fs/btrfs/ioctl.c:5010
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:874 [inline]
__se_sys_ioctl fs/ioctl.c:860 [inline]
__x64_sys_ioctl+0x193/0x200 fs/ioctl.c:860
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f86920b2c4d
RSP: 002b:00007f868f61ac58 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007f86921d90a0 RCX: 00007f86920b2c4d
RDX: 0000000020005e40 RSI: 00000000c0109428 RDI: 0000000000000008
RBP: 00007f869212bd80 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f86921d90a0
R13: 00007fff6d233e4f R14: 00007fff6d233ff0 R15: 00007f868f61adc0
INFO: task syz-executor:25628 blocked for more than 143 seconds.
Not tainted 5.15.0-rc6 #4
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:syz-executor state:D stack:29080 pid:25628 ppid: 24873 flags:0x00004004
Call Trace:
context_switch kernel/sched/core.c:4940 [inline]
__schedule+0xcd9/0x2530 kernel/sched/core.c:6287
schedule+0xd3/0x270 kernel/sched/core.c:6366
schedule_preempt_disabled+0xf/0x20 kernel/sched/core.c:6425
__mutex_lock_common kernel/locking/mutex.c:669 [inline]
__mutex_lock+0xc96/0x1680 kernel/locking/mutex.c:729
btrfs_remove_qgroup+0xb7/0x7d0 fs/btrfs/qgroup.c:1548
btrfs_ioctl_qgroup_create fs/btrfs/ioctl.c:4333 [inline]
btrfs_ioctl+0x683c/0x7b70 fs/btrfs/ioctl.c:5014
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:874 [inline]
__se_sys_ioctl fs/ioctl.c:860 [inline]
__x64_sys_ioctl+0x193/0x200 fs/ioctl.c:860
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
Reported-by: Hao Sun <[email protected]>
Link: https://lore.kernel.org/linux-btrfs/CACkBjsZQF19bQ1C6=yetF3BvL10OSORpFUcWXTP6HErshDB4dQ@mail.gmail.com/
Fixes: 340f1aa27f36 ("btrfs: qgroups: Move transaction management inside btrfs_quota_enable/disable")
CC: [email protected] # 4.19
Reviewed-by: Qu Wenruo <[email protected]>
Signed-off-by: Filipe Manana <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/btrfs/qgroup.c | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
--- a/fs/btrfs/qgroup.c
+++ b/fs/btrfs/qgroup.c
@@ -941,6 +941,14 @@ int btrfs_quota_enable(struct btrfs_fs_i
int ret = 0;
int slot;
+ /*
+ * We need to have subvol_sem write locked, to prevent races between
+ * concurrent tasks trying to enable quotas, because we will unlock
+ * and relock qgroup_ioctl_lock before setting fs_info->quota_root
+ * and before setting BTRFS_FS_QUOTA_ENABLED.
+ */
+ lockdep_assert_held_write(&fs_info->subvol_sem);
+
mutex_lock(&fs_info->qgroup_ioctl_lock);
if (fs_info->quota_root)
goto out;
@@ -1118,8 +1126,19 @@ out_add_root:
goto out_free_path;
}
+ mutex_unlock(&fs_info->qgroup_ioctl_lock);
+ /*
+ * Commit the transaction while not holding qgroup_ioctl_lock, to avoid
+ * a deadlock with tasks concurrently doing other qgroup operations, such
+ * adding/removing qgroups or adding/deleting qgroup relations for example,
+ * because all qgroup operations first start or join a transaction and then
+ * lock the qgroup_ioctl_lock mutex.
+ * We are safe from a concurrent task trying to enable quotas, by calling
+ * this function, since we are serialized by fs_info->subvol_sem.
+ */
ret = btrfs_commit_transaction(trans);
trans = NULL;
+ mutex_lock(&fs_info->qgroup_ioctl_lock);
if (ret)
goto out_free_path;
From: Lukas Bulwahn <[email protected]>
commit 82ca67321f55a8d1da6ac3ed611da3c32818bb37 upstream.
The config RANDOMIZE_SLAB does not exist, the authors probably intended to
refer to the config RANDOMIZE_BASE, which provides kernel address-space
randomization. They probably just confused SLAB with BASE (these two
four-letter words coincidentally share three common letters), as they also
point out the config SLAB_FREELIST_RANDOM as further randomization within
the same sentence.
Fix the reference of the config for kernel address-space randomization to
the config that provides that.
Fixes: 6e88559470f5 ("Documentation: Add section about CPU vulnerabilities for Spectre")
Signed-off-by: Lukas Bulwahn <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Corbet <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
Documentation/admin-guide/hw-vuln/spectre.rst | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/Documentation/admin-guide/hw-vuln/spectre.rst
+++ b/Documentation/admin-guide/hw-vuln/spectre.rst
@@ -468,7 +468,7 @@ Spectre variant 2
before invoking any firmware code to prevent Spectre variant 2 exploits
using the firmware.
- Using kernel address space randomization (CONFIG_RANDOMIZE_SLAB=y
+ Using kernel address space randomization (CONFIG_RANDOMIZE_BASE=y
and CONFIG_SLAB_FREELIST_RANDOM=y in the kernel configuration) makes
attacks on the kernel generally more difficult.
From: Kai-Heng Feng <[email protected]>
[ Upstream commit 00558586382891540c59c9febc671062425a6e47 ]
When a new USB device gets plugged to nested hubs, the affected hub,
which connects to usb 2-1.4-port2, doesn't report there's any change,
hence the nested hubs go back to runtime suspend like nothing happened:
[ 281.032951] usb usb2: usb wakeup-resume
[ 281.032959] usb usb2: usb auto-resume
[ 281.032974] hub 2-0:1.0: hub_resume
[ 281.033011] usb usb2-port1: status 0263 change 0000
[ 281.033077] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[ 281.049797] usb 2-1: usb wakeup-resume
[ 281.069800] usb 2-1: Waited 0ms for CONNECT
[ 281.069810] usb 2-1: finish resume
[ 281.070026] hub 2-1:1.0: hub_resume
[ 281.070250] usb 2-1-port4: status 0203 change 0000
[ 281.070272] usb usb2-port1: resume, status 0
[ 281.070282] hub 2-1:1.0: state 7 ports 4 chg 0010 evt 0000
[ 281.089813] usb 2-1.4: usb wakeup-resume
[ 281.109792] usb 2-1.4: Waited 0ms for CONNECT
[ 281.109801] usb 2-1.4: finish resume
[ 281.109991] hub 2-1.4:1.0: hub_resume
[ 281.110147] usb 2-1.4-port2: status 0263 change 0000
[ 281.110234] usb 2-1-port4: resume, status 0
[ 281.110239] usb 2-1-port4: status 0203, change 0000, 10.0 Gb/s
[ 281.110266] hub 2-1.4:1.0: state 7 ports 4 chg 0000 evt 0000
[ 281.110426] hub 2-1.4:1.0: hub_suspend
[ 281.110565] usb 2-1.4: usb auto-suspend, wakeup 1
[ 281.130998] hub 2-1:1.0: hub_suspend
[ 281.137788] usb 2-1: usb auto-suspend, wakeup 1
[ 281.142935] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[ 281.177828] usb 2-1: usb wakeup-resume
[ 281.197839] usb 2-1: Waited 0ms for CONNECT
[ 281.197850] usb 2-1: finish resume
[ 281.197984] hub 2-1:1.0: hub_resume
[ 281.198203] usb 2-1-port4: status 0203 change 0000
[ 281.198228] usb usb2-port1: resume, status 0
[ 281.198237] hub 2-1:1.0: state 7 ports 4 chg 0010 evt 0000
[ 281.217835] usb 2-1.4: usb wakeup-resume
[ 281.237834] usb 2-1.4: Waited 0ms for CONNECT
[ 281.237845] usb 2-1.4: finish resume
[ 281.237990] hub 2-1.4:1.0: hub_resume
[ 281.238067] usb 2-1.4-port2: status 0263 change 0000
[ 281.238148] usb 2-1-port4: resume, status 0
[ 281.238152] usb 2-1-port4: status 0203, change 0000, 10.0 Gb/s
[ 281.238166] hub 2-1.4:1.0: state 7 ports 4 chg 0000 evt 0000
[ 281.238385] hub 2-1.4:1.0: hub_suspend
[ 281.238523] usb 2-1.4: usb auto-suspend, wakeup 1
[ 281.258076] hub 2-1:1.0: hub_suspend
[ 281.265744] usb 2-1: usb auto-suspend, wakeup 1
[ 281.285976] hub 2-0:1.0: hub_suspend
[ 281.285988] usb usb2: bus auto-suspend, wakeup 1
USB 3.2 spec, 9.2.5.4 "Changing Function Suspend State" says that "If
the link is in a non-U0 state, then the device must transition the link
to U0 prior to sending the remote wake message", but the hub only
transits the link to U0 after signaling remote wakeup.
So be more forgiving and use a 20ms delay to let the link transit to U0
for remote wakeup.
Suggested-by: Alan Stern <[email protected]>
Acked-by: Alan Stern <[email protected]>
Signed-off-by: Kai-Heng Feng <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/core/hub.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index af15dbe6bb141..18ee3914b4686 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -1109,7 +1109,10 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
} else {
hub_power_on(hub, true);
}
- }
+ /* Give some time on remote wakeup to let links to transit to U0 */
+ } else if (hub_is_superspeed(hub->hdev))
+ msleep(20);
+
init2:
/*
--
2.34.1
From: Luiz Augusto von Dentz <[email protected]>
commit f16a491c65d9eb19398b25aefc10c2d3313d17b3 upstream.
10bbffa3e88e attempted to fix the use of rotation duration as
advertising duration but it didn't change the if condition which still
uses the duration instead of the timeout.
Fixes: 10bbffa3e88e ("Bluetooth: Fix using advertising instance duration as timeout")
Signed-off-by: Luiz Augusto von Dentz <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/bluetooth/hci_request.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/net/bluetooth/hci_request.c
+++ b/net/bluetooth/hci_request.c
@@ -2118,7 +2118,7 @@ int __hci_req_enable_ext_advertising(str
/* Set duration per instance since controller is responsible for
* scheduling it.
*/
- if (adv_instance && adv_instance->duration) {
+ if (adv_instance && adv_instance->timeout) {
u16 duration = adv_instance->timeout * MSEC_PER_SEC;
/* Time = N * 10 ms */
From: Pali Rohár <[email protected]>
commit 3be9d243b21724d49b65043d4520d688b6040b36 upstream.
Since all PCI Express device Functions are required to implement the PCI
Express Capability structure, Capabilities List bit in PCI Status Register
must be hardwired to 1b. Capabilities Pointer register (which is already
set by pci-bride-emul.c driver) is valid only when Capabilities List is set
to 1b.
Link: https://lore.kernel.org/r/[email protected]
Fixes: 23a5fba4d941 ("PCI: Introduce PCI bridge emulated config space common logic")
Signed-off-by: Pali Rohár <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/pci-bridge-emul.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/pci/pci-bridge-emul.c
+++ b/drivers/pci/pci-bridge-emul.c
@@ -296,6 +296,7 @@ int pci_bridge_emul_init(struct pci_brid
if (bridge->has_pcie) {
bridge->conf.capabilities_pointer = PCI_CAP_PCIE_START;
+ bridge->conf.status |= cpu_to_le16(PCI_STATUS_CAP_LIST);
bridge->pcie_conf.cap_id = PCI_CAP_ID_EXP;
bridge->pcie_conf.cap |= cpu_to_le16(PCI_EXP_TYPE_ROOT_PORT << 4);
bridge->pcie_cap_regs_behavior =
From: Jan Kara <[email protected]>
commit 15fc69bbbbbc8c72e5f6cc4e1be0f51283c5448e upstream.
When we hit an error when enabling quotas and setting inode flags, we do
not properly shutdown quota subsystem despite returning error from
Q_QUOTAON quotactl. This can lead to some odd situations like kernel
using quota file while it is still writeable for userspace. Make sure we
properly cleanup the quota subsystem in case of error.
Signed-off-by: Jan Kara <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/super.c | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -6341,10 +6341,7 @@ static int ext4_quota_on(struct super_bl
lockdep_set_quota_inode(path->dentry->d_inode, I_DATA_SEM_QUOTA);
err = dquot_quota_on(sb, type, format_id, path);
- if (err) {
- lockdep_set_quota_inode(path->dentry->d_inode,
- I_DATA_SEM_NORMAL);
- } else {
+ if (!err) {
struct inode *inode = d_inode(path->dentry);
handle_t *handle;
@@ -6364,7 +6361,12 @@ static int ext4_quota_on(struct super_bl
ext4_journal_stop(handle);
unlock_inode:
inode_unlock(inode);
+ if (err)
+ dquot_quota_off(sb, type);
}
+ if (err)
+ lockdep_set_quota_inode(path->dentry->d_inode,
+ I_DATA_SEM_NORMAL);
return err;
}
From: Randy Dunlap <[email protected]>
[ Upstream commit 76f66dfd60dc5d2f9dec22d99091fea1035c5d03 ]
Provide a simple implementation of clk_set_parent() in the lantiq
subarch so that callers of it will build without errors.
Fixes these build errors:
ERROR: modpost: "clk_set_parent" [sound/soc/jz4740/snd-soc-jz4740-i2s.ko] undefined!
ERROR: modpost: "clk_set_parent" [sound/soc/atmel/snd-soc-atmel-i2s.ko] undefined!
Fixes: 171bb2f19ed6 ("MIPS: Lantiq: Add initial support for Lantiq SoCs")
Signed-off-by: Randy Dunlap <[email protected]>
Reported-by: kernel test robot <[email protected]>
[email protected] --cc="John Crispin <[email protected]>" --cc="Jonathan Cameron <[email protected]>" --cc="Russell King <[email protected]>" --cc="Andy Shevchenko <[email protected]>" [email protected] --to="Thomas Bogendoerfer <[email protected]>"
Reviewed-by: Jonathan Cameron <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/mips/lantiq/clk.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/mips/lantiq/clk.c b/arch/mips/lantiq/clk.c
index 4916cccf378fd..7a623684d9b5e 100644
--- a/arch/mips/lantiq/clk.c
+++ b/arch/mips/lantiq/clk.c
@@ -164,6 +164,12 @@ struct clk *clk_get_parent(struct clk *clk)
}
EXPORT_SYMBOL(clk_get_parent);
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+ return 0;
+}
+EXPORT_SYMBOL(clk_set_parent);
+
static inline u32 get_counter_resolution(void)
{
u32 res;
--
2.34.1
From: Sakari Ailus <[email protected]>
commit a11174952205d082f1658fab4314f0caf706e0a8 upstream.
The data node reference documentation was missing a package that must
contain the property values, instead property name and multiple values
being present in a single package. This is not aligned with the _DSD
spec.
Fix it by adding the package for the values.
Also add the missing "reg" properties to two numbered nodes.
Fixes: b10134a3643d ("ACPI: property: Document hierarchical data extension references")
Signed-off-by: Sakari Ailus <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
Documentation/firmware-guide/acpi/dsd/data-node-references.rst | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
--- a/Documentation/firmware-guide/acpi/dsd/data-node-references.rst
+++ b/Documentation/firmware-guide/acpi/dsd/data-node-references.rst
@@ -5,7 +5,7 @@
Referencing hierarchical data nodes
===================================
-:Copyright: |copy| 2018 Intel Corporation
+:Copyright: |copy| 2018, 2021 Intel Corporation
:Author: Sakari Ailus <[email protected]>
ACPI in general allows referring to device objects in the tree only.
@@ -52,12 +52,14 @@ the ANOD object which is also the final
Name (NOD0, Package() {
ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package () {
+ Package () { "reg", 0 },
Package () { "random-property", 3 },
}
})
Name (NOD1, Package() {
ToUUID("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
Package () {
+ Package () { "reg", 1 },
Package () { "anothernode", "ANOD" },
}
})
@@ -74,7 +76,11 @@ the ANOD object which is also the final
Name (_DSD, Package () {
ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package () {
- Package () { "reference", ^DEV0, "node@1", "anothernode" },
+ Package () {
+ "reference", Package () {
+ ^DEV0, "node@1", "anothernode"
+ }
+ },
}
})
}
From: Mauro Carvalho Chehab <[email protected]>
[ Upstream commit a2ab06d7c4d6bfd0b545a768247a70463e977e27 ]
Using stack-allocated pointers for USB message data don't work.
This driver is almost OK with that, except for the I2C read
logic.
Fix it by using a temporary read buffer, just like on all other
calls to m920x_read().
Link: https://lore.kernel.org/all/[email protected]/
Reported-by: [email protected]
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/usb/dvb-usb/m920x.c | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)
diff --git a/drivers/media/usb/dvb-usb/m920x.c b/drivers/media/usb/dvb-usb/m920x.c
index 4bb5b82599a79..691e05833db19 100644
--- a/drivers/media/usb/dvb-usb/m920x.c
+++ b/drivers/media/usb/dvb-usb/m920x.c
@@ -274,6 +274,13 @@ static int m920x_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], int nu
/* Should check for ack here, if we knew how. */
}
if (msg[i].flags & I2C_M_RD) {
+ char *read = kmalloc(1, GFP_KERNEL);
+ if (!read) {
+ ret = -ENOMEM;
+ kfree(read);
+ goto unlock;
+ }
+
for (j = 0; j < msg[i].len; j++) {
/* Last byte of transaction?
* Send STOP, otherwise send ACK. */
@@ -281,9 +288,12 @@ static int m920x_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], int nu
if ((ret = m920x_read(d->udev, M9206_I2C, 0x0,
0x20 | stop,
- &msg[i].buf[j], 1)) != 0)
+ read, 1)) != 0)
goto unlock;
+ msg[i].buf[j] = read[0];
}
+
+ kfree(read);
} else {
for (j = 0; j < msg[i].len; j++) {
/* Last byte of transaction? Then send STOP. */
--
2.34.1
From: Randy Dunlap <[email protected]>
commit b0ac702f3329cdc8a06dcaac73183d4b5a2b942d upstream.
Adjust the path of the ABI files for firewire.rst to prevent a
documentation build error. Prevents this problem:
Sphinx parallel build error:
docutils.utils.SystemMessage: Documentation/driver-api/firewire.rst:22: (SEVERE/4) Problems with "include" directive path:
InputError: [Errno 2] No such file or directory: '../Documentation/driver-api/ABI/stable/firewire-cdev'.
Fixes: 2f4830ef96d2 ("FireWire: add driver-api Introduction section")
Signed-off-by: Randy Dunlap <[email protected]>
Tested-by: Akira Yokosawa <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Corbet <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
Documentation/driver-api/firewire.rst | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/Documentation/driver-api/firewire.rst
+++ b/Documentation/driver-api/firewire.rst
@@ -19,7 +19,7 @@ of kernel interfaces is available via ex
Firewire char device data structures
====================================
-.. include:: /ABI/stable/firewire-cdev
+.. include:: ../ABI/stable/firewire-cdev
:literal:
.. kernel-doc:: include/uapi/linux/firewire-cdev.h
@@ -28,7 +28,7 @@ Firewire char device data structures
Firewire device probing and sysfs interfaces
============================================
-.. include:: /ABI/stable/sysfs-bus-firewire
+.. include:: ../ABI/stable/sysfs-bus-firewire
:literal:
.. kernel-doc:: drivers/firewire/core-device.c
From: Shaul Triebitz <[email protected]>
[ Upstream commit 8e967c137df3b236d2075f9538cb888129425d1a ]
When scheduling a session protection the id is saved but
then it may be cleared when calling iwl_mvm_te_clear_data
(if a previous session protection is currently active).
Fix it by saving the id after calling iwl_mvm_te_clear_data.
Signed-off-by: Shaul Triebitz <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20211204130722.b0743a588d14.I098fef6677d0dab3ef1b6183ed206a10bab01eb2@changeid
Signed-off-by: Luca Coelho <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/intel/iwlwifi/mvm/time-event.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/time-event.c b/drivers/net/wireless/intel/iwlwifi/mvm/time-event.c
index a633ad5f8ca4e..3f081cdea09ca 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/time-event.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/time-event.c
@@ -1166,15 +1166,10 @@ void iwl_mvm_schedule_session_protection(struct iwl_mvm *mvm,
cpu_to_le32(FW_CMD_ID_AND_COLOR(mvmvif->id,
mvmvif->color)),
.action = cpu_to_le32(FW_CTXT_ACTION_ADD),
+ .conf_id = cpu_to_le32(SESSION_PROTECT_CONF_ASSOC),
.duration_tu = cpu_to_le32(MSEC_TO_TU(duration)),
};
- /* The time_event_data.id field is reused to save session
- * protection's configuration.
- */
- mvmvif->time_event_data.id = SESSION_PROTECT_CONF_ASSOC;
- cmd.conf_id = cpu_to_le32(mvmvif->time_event_data.id);
-
lockdep_assert_held(&mvm->mutex);
spin_lock_bh(&mvm->time_event_lock);
@@ -1188,6 +1183,11 @@ void iwl_mvm_schedule_session_protection(struct iwl_mvm *mvm,
}
iwl_mvm_te_clear_data(mvm, te_data);
+ /*
+ * The time_event_data.id field is reused to save session
+ * protection's configuration.
+ */
+ te_data->id = le32_to_cpu(cmd.conf_id);
te_data->duration = le32_to_cpu(cmd.duration_tu);
spin_unlock_bh(&mvm->time_event_lock);
--
2.34.1
From: Ghalem Boudour <[email protected]>
commit bcf141b2eb551b3477b24997ebc09c65f117a803 upstream.
On egress side, xfrm lookup is called from __gre6_xmit() with the
fl6_gre_key field not initialized leading to policies selectors check
failure. Consequently, gre packets are sent without encryption.
On ingress side, INET6_PROTO_NOPOLICY was set, thus packets were not
checked against xfrm policies. Like for egress side, fl6_gre_key should be
correctly set, this is now done in decode_session6().
Fixes: c12b395a4664 ("gre: Support GRE over IPv6")
Cc: [email protected]
Signed-off-by: Ghalem Boudour <[email protected]>
Signed-off-by: Nicolas Dichtel <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv6/ip6_gre.c | 5 ++++-
net/xfrm/xfrm_policy.c | 21 +++++++++++++++++++++
2 files changed, 25 insertions(+), 1 deletion(-)
--- a/net/ipv6/ip6_gre.c
+++ b/net/ipv6/ip6_gre.c
@@ -755,6 +755,7 @@ static netdev_tx_t __gre6_xmit(struct sk
fl6->daddr = key->u.ipv6.dst;
fl6->flowlabel = key->label;
fl6->flowi6_uid = sock_net_uid(dev_net(dev), NULL);
+ fl6->fl6_gre_key = tunnel_id_to_key32(key->tun_id);
dsfield = key->tos;
flags = key->tun_flags &
@@ -990,6 +991,7 @@ static netdev_tx_t ip6erspan_tunnel_xmit
fl6.daddr = key->u.ipv6.dst;
fl6.flowlabel = key->label;
fl6.flowi6_uid = sock_net_uid(dev_net(dev), NULL);
+ fl6.fl6_gre_key = tunnel_id_to_key32(key->tun_id);
dsfield = key->tos;
if (!(tun_info->key.tun_flags & TUNNEL_ERSPAN_OPT))
@@ -1098,6 +1100,7 @@ static void ip6gre_tnl_link_config_commo
fl6->flowi6_oif = p->link;
fl6->flowlabel = 0;
fl6->flowi6_proto = IPPROTO_GRE;
+ fl6->fl6_gre_key = t->parms.o_key;
if (!(p->flags&IP6_TNL_F_USE_ORIG_TCLASS))
fl6->flowlabel |= IPV6_TCLASS_MASK & p->flowinfo;
@@ -1543,7 +1546,7 @@ static void ip6gre_fb_tunnel_init(struct
static struct inet6_protocol ip6gre_protocol __read_mostly = {
.handler = gre_rcv,
.err_handler = ip6gre_err,
- .flags = INET6_PROTO_NOPOLICY|INET6_PROTO_FINAL,
+ .flags = INET6_PROTO_FINAL,
};
static void ip6gre_destroy_tunnels(struct net *net, struct list_head *head)
--- a/net/xfrm/xfrm_policy.c
+++ b/net/xfrm/xfrm_policy.c
@@ -33,6 +33,7 @@
#include <net/flow.h>
#include <net/xfrm.h>
#include <net/ip.h>
+#include <net/gre.h>
#if IS_ENABLED(CONFIG_IPV6_MIP6)
#include <net/mip6.h>
#endif
@@ -3455,6 +3456,26 @@ decode_session6(struct sk_buff *skb, str
}
fl6->flowi6_proto = nexthdr;
return;
+ case IPPROTO_GRE:
+ if (!onlyproto &&
+ (nh + offset + 12 < skb->data ||
+ pskb_may_pull(skb, nh + offset + 12 - skb->data))) {
+ struct gre_base_hdr *gre_hdr;
+ __be32 *gre_key;
+
+ nh = skb_network_header(skb);
+ gre_hdr = (struct gre_base_hdr *)(nh + offset);
+ gre_key = (__be32 *)(gre_hdr + 1);
+
+ if (gre_hdr->flags & GRE_KEY) {
+ if (gre_hdr->flags & GRE_CSUM)
+ gre_key++;
+ fl6->fl6_gre_key = *gre_key;
+ }
+ }
+ fl6->flowi6_proto = nexthdr;
+ return;
+
#if IS_ENABLED(CONFIG_IPV6_MIP6)
case IPPROTO_MH:
offset += ipv6_optlen(exthdr);
From: Fabrice Gasnier <[email protected]>
[ Upstream commit 01f68f067dc39df9c9d95d759ee61517eb4b0fcf ]
Currently, the STM32 LP Timer counter driver registers into both IIO and
counter subsystems, which is redundant.
Remove the IIO counter ABI and IIO registration from the STM32 LP Timer
counter driver since it's been superseded by the Counter subsystem
as discussed in [1].
Keep only the counter subsystem related part.
Move a part of the ABI documentation into a driver comment.
This also removes a duplicate ABI warning
$ scripts/get_abi.pl validate
...
/sys/bus/iio/devices/iio:deviceX/in_count0_preset is defined 2 times:
./Documentation/ABI/testing/sysfs-bus-iio-timer-stm32:100
./Documentation/ABI/testing/sysfs-bus-iio-lptimer-stm32:0
[1] https://lkml.org/lkml/2021/1/19/347
Acked-by: William Breathitt Gray <[email protected]>
Signed-off-by: Fabrice Gasnier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../ABI/testing/sysfs-bus-iio-lptimer-stm32 | 62 ----
drivers/counter/Kconfig | 2 +-
drivers/counter/stm32-lptimer-cnt.c | 297 +++---------------
3 files changed, 37 insertions(+), 324 deletions(-)
delete mode 100644 Documentation/ABI/testing/sysfs-bus-iio-lptimer-stm32
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-lptimer-stm32 b/Documentation/ABI/testing/sysfs-bus-iio-lptimer-stm32
deleted file mode 100644
index 73498ff666bd7..0000000000000
--- a/Documentation/ABI/testing/sysfs-bus-iio-lptimer-stm32
+++ /dev/null
@@ -1,62 +0,0 @@
-What: /sys/bus/iio/devices/iio:deviceX/in_count0_preset
-KernelVersion: 4.13
-Contact: [email protected]
-Description:
- Reading returns the current preset value. Writing sets the
- preset value. Encoder counts continuously from 0 to preset
- value, depending on direction (up/down).
-
-What: /sys/bus/iio/devices/iio:deviceX/in_count_quadrature_mode_available
-KernelVersion: 4.13
-Contact: [email protected]
-Description:
- Reading returns the list possible quadrature modes.
-
-What: /sys/bus/iio/devices/iio:deviceX/in_count0_quadrature_mode
-KernelVersion: 4.13
-Contact: [email protected]
-Description:
- Configure the device counter quadrature modes:
-
- - non-quadrature:
- Encoder IN1 input servers as the count input (up
- direction).
-
- - quadrature:
- Encoder IN1 and IN2 inputs are mixed to get direction
- and count.
-
-What: /sys/bus/iio/devices/iio:deviceX/in_count_polarity_available
-KernelVersion: 4.13
-Contact: [email protected]
-Description:
- Reading returns the list possible active edges.
-
-What: /sys/bus/iio/devices/iio:deviceX/in_count0_polarity
-KernelVersion: 4.13
-Contact: [email protected]
-Description:
- Configure the device encoder/counter active edge:
-
- - rising-edge
- - falling-edge
- - both-edges
-
- In non-quadrature mode, device counts up on active edge.
-
- In quadrature mode, encoder counting scenarios are as follows:
-
- +---------+----------+--------------------+--------------------+
- | Active | Level on | IN1 signal | IN2 signal |
- | edge | opposite +----------+---------+----------+---------+
- | | signal | Rising | Falling | Rising | Falling |
- +---------+----------+----------+---------+----------+---------+
- | Rising | High -> | Down | - | Up | - |
- | edge | Low -> | Up | - | Down | - |
- +---------+----------+----------+---------+----------+---------+
- | Falling | High -> | - | Up | - | Down |
- | edge | Low -> | - | Down | - | Up |
- +---------+----------+----------+---------+----------+---------+
- | Both | High -> | Down | Up | Up | Down |
- | edges | Low -> | Up | Down | Down | Up |
- +---------+----------+----------+---------+----------+---------+
diff --git a/drivers/counter/Kconfig b/drivers/counter/Kconfig
index 2de53ab0dd252..cbdf84200e278 100644
--- a/drivers/counter/Kconfig
+++ b/drivers/counter/Kconfig
@@ -41,7 +41,7 @@ config STM32_TIMER_CNT
config STM32_LPTIMER_CNT
tristate "STM32 LP Timer encoder counter driver"
- depends on (MFD_STM32_LPTIMER || COMPILE_TEST) && IIO
+ depends on MFD_STM32_LPTIMER || COMPILE_TEST
help
Select this option to enable STM32 Low-Power Timer quadrature encoder
and counter driver.
diff --git a/drivers/counter/stm32-lptimer-cnt.c b/drivers/counter/stm32-lptimer-cnt.c
index fd6828e2d34f5..937439635d53f 100644
--- a/drivers/counter/stm32-lptimer-cnt.c
+++ b/drivers/counter/stm32-lptimer-cnt.c
@@ -12,8 +12,8 @@
#include <linux/bitfield.h>
#include <linux/counter.h>
-#include <linux/iio/iio.h>
#include <linux/mfd/stm32-lptimer.h>
+#include <linux/mod_devicetable.h>
#include <linux/module.h>
#include <linux/pinctrl/consumer.h>
#include <linux/platform_device.h>
@@ -107,249 +107,27 @@ static int stm32_lptim_setup(struct stm32_lptim_cnt *priv, int enable)
return regmap_update_bits(priv->regmap, STM32_LPTIM_CFGR, mask, val);
}
-static int stm32_lptim_write_raw(struct iio_dev *indio_dev,
- struct iio_chan_spec const *chan,
- int val, int val2, long mask)
-{
- struct stm32_lptim_cnt *priv = iio_priv(indio_dev);
- int ret;
-
- switch (mask) {
- case IIO_CHAN_INFO_ENABLE:
- if (val < 0 || val > 1)
- return -EINVAL;
-
- /* Check nobody uses the timer, or already disabled/enabled */
- ret = stm32_lptim_is_enabled(priv);
- if ((ret < 0) || (!ret && !val))
- return ret;
- if (val && ret)
- return -EBUSY;
-
- ret = stm32_lptim_setup(priv, val);
- if (ret)
- return ret;
- return stm32_lptim_set_enable_state(priv, val);
-
- default:
- return -EINVAL;
- }
-}
-
-static int stm32_lptim_read_raw(struct iio_dev *indio_dev,
- struct iio_chan_spec const *chan,
- int *val, int *val2, long mask)
-{
- struct stm32_lptim_cnt *priv = iio_priv(indio_dev);
- u32 dat;
- int ret;
-
- switch (mask) {
- case IIO_CHAN_INFO_RAW:
- ret = regmap_read(priv->regmap, STM32_LPTIM_CNT, &dat);
- if (ret)
- return ret;
- *val = dat;
- return IIO_VAL_INT;
-
- case IIO_CHAN_INFO_ENABLE:
- ret = stm32_lptim_is_enabled(priv);
- if (ret < 0)
- return ret;
- *val = ret;
- return IIO_VAL_INT;
-
- case IIO_CHAN_INFO_SCALE:
- /* Non-quadrature mode: scale = 1 */
- *val = 1;
- *val2 = 0;
- if (priv->quadrature_mode) {
- /*
- * Quadrature encoder mode:
- * - both edges, quarter cycle, scale is 0.25
- * - either rising/falling edge scale is 0.5
- */
- if (priv->polarity > 1)
- *val2 = 2;
- else
- *val2 = 1;
- }
- return IIO_VAL_FRACTIONAL_LOG2;
-
- default:
- return -EINVAL;
- }
-}
-
-static const struct iio_info stm32_lptim_cnt_iio_info = {
- .read_raw = stm32_lptim_read_raw,
- .write_raw = stm32_lptim_write_raw,
-};
-
-static const char *const stm32_lptim_quadrature_modes[] = {
- "non-quadrature",
- "quadrature",
-};
-
-static int stm32_lptim_get_quadrature_mode(struct iio_dev *indio_dev,
- const struct iio_chan_spec *chan)
-{
- struct stm32_lptim_cnt *priv = iio_priv(indio_dev);
-
- return priv->quadrature_mode;
-}
-
-static int stm32_lptim_set_quadrature_mode(struct iio_dev *indio_dev,
- const struct iio_chan_spec *chan,
- unsigned int type)
-{
- struct stm32_lptim_cnt *priv = iio_priv(indio_dev);
-
- if (stm32_lptim_is_enabled(priv))
- return -EBUSY;
-
- priv->quadrature_mode = type;
-
- return 0;
-}
-
-static const struct iio_enum stm32_lptim_quadrature_mode_en = {
- .items = stm32_lptim_quadrature_modes,
- .num_items = ARRAY_SIZE(stm32_lptim_quadrature_modes),
- .get = stm32_lptim_get_quadrature_mode,
- .set = stm32_lptim_set_quadrature_mode,
-};
-
-static const char * const stm32_lptim_cnt_polarity[] = {
- "rising-edge", "falling-edge", "both-edges",
-};
-
-static int stm32_lptim_cnt_get_polarity(struct iio_dev *indio_dev,
- const struct iio_chan_spec *chan)
-{
- struct stm32_lptim_cnt *priv = iio_priv(indio_dev);
-
- return priv->polarity;
-}
-
-static int stm32_lptim_cnt_set_polarity(struct iio_dev *indio_dev,
- const struct iio_chan_spec *chan,
- unsigned int type)
-{
- struct stm32_lptim_cnt *priv = iio_priv(indio_dev);
-
- if (stm32_lptim_is_enabled(priv))
- return -EBUSY;
-
- priv->polarity = type;
-
- return 0;
-}
-
-static const struct iio_enum stm32_lptim_cnt_polarity_en = {
- .items = stm32_lptim_cnt_polarity,
- .num_items = ARRAY_SIZE(stm32_lptim_cnt_polarity),
- .get = stm32_lptim_cnt_get_polarity,
- .set = stm32_lptim_cnt_set_polarity,
-};
-
-static ssize_t stm32_lptim_cnt_get_ceiling(struct stm32_lptim_cnt *priv,
- char *buf)
-{
- return snprintf(buf, PAGE_SIZE, "%u\n", priv->ceiling);
-}
-
-static ssize_t stm32_lptim_cnt_set_ceiling(struct stm32_lptim_cnt *priv,
- const char *buf, size_t len)
-{
- int ret;
-
- if (stm32_lptim_is_enabled(priv))
- return -EBUSY;
-
- ret = kstrtouint(buf, 0, &priv->ceiling);
- if (ret)
- return ret;
-
- if (priv->ceiling > STM32_LPTIM_MAX_ARR)
- return -EINVAL;
-
- return len;
-}
-
-static ssize_t stm32_lptim_cnt_get_preset_iio(struct iio_dev *indio_dev,
- uintptr_t private,
- const struct iio_chan_spec *chan,
- char *buf)
-{
- struct stm32_lptim_cnt *priv = iio_priv(indio_dev);
-
- return stm32_lptim_cnt_get_ceiling(priv, buf);
-}
-
-static ssize_t stm32_lptim_cnt_set_preset_iio(struct iio_dev *indio_dev,
- uintptr_t private,
- const struct iio_chan_spec *chan,
- const char *buf, size_t len)
-{
- struct stm32_lptim_cnt *priv = iio_priv(indio_dev);
-
- return stm32_lptim_cnt_set_ceiling(priv, buf, len);
-}
-
-/* LP timer with encoder */
-static const struct iio_chan_spec_ext_info stm32_lptim_enc_ext_info[] = {
- {
- .name = "preset",
- .shared = IIO_SEPARATE,
- .read = stm32_lptim_cnt_get_preset_iio,
- .write = stm32_lptim_cnt_set_preset_iio,
- },
- IIO_ENUM("polarity", IIO_SEPARATE, &stm32_lptim_cnt_polarity_en),
- IIO_ENUM_AVAILABLE("polarity", &stm32_lptim_cnt_polarity_en),
- IIO_ENUM("quadrature_mode", IIO_SEPARATE,
- &stm32_lptim_quadrature_mode_en),
- IIO_ENUM_AVAILABLE("quadrature_mode", &stm32_lptim_quadrature_mode_en),
- {}
-};
-
-static const struct iio_chan_spec stm32_lptim_enc_channels = {
- .type = IIO_COUNT,
- .channel = 0,
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
- BIT(IIO_CHAN_INFO_ENABLE) |
- BIT(IIO_CHAN_INFO_SCALE),
- .ext_info = stm32_lptim_enc_ext_info,
- .indexed = 1,
-};
-
-/* LP timer without encoder (counter only) */
-static const struct iio_chan_spec_ext_info stm32_lptim_cnt_ext_info[] = {
- {
- .name = "preset",
- .shared = IIO_SEPARATE,
- .read = stm32_lptim_cnt_get_preset_iio,
- .write = stm32_lptim_cnt_set_preset_iio,
- },
- IIO_ENUM("polarity", IIO_SEPARATE, &stm32_lptim_cnt_polarity_en),
- IIO_ENUM_AVAILABLE("polarity", &stm32_lptim_cnt_polarity_en),
- {}
-};
-
-static const struct iio_chan_spec stm32_lptim_cnt_channels = {
- .type = IIO_COUNT,
- .channel = 0,
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
- BIT(IIO_CHAN_INFO_ENABLE) |
- BIT(IIO_CHAN_INFO_SCALE),
- .ext_info = stm32_lptim_cnt_ext_info,
- .indexed = 1,
-};
-
/**
* enum stm32_lptim_cnt_function - enumerates LPTimer counter & encoder modes
* @STM32_LPTIM_COUNTER_INCREASE: up count on IN1 rising, falling or both edges
* @STM32_LPTIM_ENCODER_BOTH_EDGE: count on both edges (IN1 & IN2 quadrature)
+ *
+ * In non-quadrature mode, device counts up on active edge.
+ * In quadrature mode, encoder counting scenarios are as follows:
+ * +---------+----------+--------------------+--------------------+
+ * | Active | Level on | IN1 signal | IN2 signal |
+ * | edge | opposite +----------+---------+----------+---------+
+ * | | signal | Rising | Falling | Rising | Falling |
+ * +---------+----------+----------+---------+----------+---------+
+ * | Rising | High -> | Down | - | Up | - |
+ * | edge | Low -> | Up | - | Down | - |
+ * +---------+----------+----------+---------+----------+---------+
+ * | Falling | High -> | - | Up | - | Down |
+ * | edge | Low -> | - | Down | - | Up |
+ * +---------+----------+----------+---------+----------+---------+
+ * | Both | High -> | Down | Up | Up | Down |
+ * | edges | Low -> | Up | Down | Down | Up |
+ * +---------+----------+----------+---------+----------+---------+
*/
enum stm32_lptim_cnt_function {
STM32_LPTIM_COUNTER_INCREASE,
@@ -484,7 +262,7 @@ static ssize_t stm32_lptim_cnt_ceiling_read(struct counter_device *counter,
{
struct stm32_lptim_cnt *const priv = counter->priv;
- return stm32_lptim_cnt_get_ceiling(priv, buf);
+ return snprintf(buf, PAGE_SIZE, "%u\n", priv->ceiling);
}
static ssize_t stm32_lptim_cnt_ceiling_write(struct counter_device *counter,
@@ -493,8 +271,22 @@ static ssize_t stm32_lptim_cnt_ceiling_write(struct counter_device *counter,
const char *buf, size_t len)
{
struct stm32_lptim_cnt *const priv = counter->priv;
+ unsigned int ceiling;
+ int ret;
+
+ if (stm32_lptim_is_enabled(priv))
+ return -EBUSY;
+
+ ret = kstrtouint(buf, 0, &ceiling);
+ if (ret)
+ return ret;
+
+ if (ceiling > STM32_LPTIM_MAX_ARR)
+ return -EINVAL;
+
+ priv->ceiling = ceiling;
- return stm32_lptim_cnt_set_ceiling(priv, buf, len);
+ return len;
}
static const struct counter_count_ext stm32_lptim_cnt_ext[] = {
@@ -630,32 +422,19 @@ static int stm32_lptim_cnt_probe(struct platform_device *pdev)
{
struct stm32_lptimer *ddata = dev_get_drvdata(pdev->dev.parent);
struct stm32_lptim_cnt *priv;
- struct iio_dev *indio_dev;
- int ret;
if (IS_ERR_OR_NULL(ddata))
return -EINVAL;
- indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*priv));
- if (!indio_dev)
+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
return -ENOMEM;
- priv = iio_priv(indio_dev);
priv->dev = &pdev->dev;
priv->regmap = ddata->regmap;
priv->clk = ddata->clk;
priv->ceiling = STM32_LPTIM_MAX_ARR;
- /* Initialize IIO device */
- indio_dev->name = dev_name(&pdev->dev);
- indio_dev->dev.of_node = pdev->dev.of_node;
- indio_dev->info = &stm32_lptim_cnt_iio_info;
- if (ddata->has_encoder)
- indio_dev->channels = &stm32_lptim_enc_channels;
- else
- indio_dev->channels = &stm32_lptim_cnt_channels;
- indio_dev->num_channels = 1;
-
/* Initialize Counter device */
priv->counter.name = dev_name(&pdev->dev);
priv->counter.parent = &pdev->dev;
@@ -673,10 +452,6 @@ static int stm32_lptim_cnt_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, priv);
- ret = devm_iio_device_register(&pdev->dev, indio_dev);
- if (ret)
- return ret;
-
return devm_counter_register(&pdev->dev, &priv->counter);
}
--
2.34.1
From: Hyeong-Jun Kim <[email protected]>
commit 7377e853967ba45bf409e3b5536624d2cbc99f21 upstream.
There is a potential deadlock between writeback process and a process
performing write_begin() or write_cache_pages() while trying to write
same compress file, but not compressable, as below:
[Process A] - doing checkpoint
[Process B] [Process C]
f2fs_write_cache_pages()
- lock_page() [all pages in cluster, 0-31]
- f2fs_write_multi_pages()
- f2fs_write_raw_pages()
- f2fs_write_single_data_page()
- f2fs_do_write_data_page()
- return -EAGAIN [f2fs_trylock_op() failed]
- unlock_page(page) [e.g., page 0]
- generic_perform_write()
- f2fs_write_begin()
- f2fs_prepare_compress_overwrite()
- prepare_compress_overwrite()
- lock_page() [e.g., page 0]
- lock_page() [e.g., page 1]
- lock_page(page) [e.g., page 0]
Since there is no compress process, it is no longer necessary to hold
locks on every pages in cluster within f2fs_write_raw_pages().
This patch changes f2fs_write_raw_pages() to release all locks first
and then perform write same as the non-compress file in
f2fs_write_cache_pages().
Fixes: 4c8ff7095bef ("f2fs: support data compression")
Signed-off-by: Hyeong-Jun Kim <[email protected]>
Signed-off-by: Sungjong Seo <[email protected]>
Signed-off-by: Youngjin Gil <[email protected]>
Reviewed-by: Chao Yu <[email protected]>
Signed-off-by: Jaegeuk Kim <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/f2fs/compress.c | 50 ++++++++++++++++++++++----------------------------
1 file changed, 22 insertions(+), 28 deletions(-)
--- a/fs/f2fs/compress.c
+++ b/fs/f2fs/compress.c
@@ -1362,25 +1362,38 @@ static int f2fs_write_raw_pages(struct c
enum iostat_type io_type)
{
struct address_space *mapping = cc->inode->i_mapping;
- int _submitted, compr_blocks, ret;
- int i = -1, err = 0;
+ int _submitted, compr_blocks, ret, i;
compr_blocks = f2fs_compressed_blocks(cc);
- if (compr_blocks < 0) {
- err = compr_blocks;
- goto out_err;
+
+ for (i = 0; i < cc->cluster_size; i++) {
+ if (!cc->rpages[i])
+ continue;
+
+ redirty_page_for_writepage(wbc, cc->rpages[i]);
+ unlock_page(cc->rpages[i]);
}
+ if (compr_blocks < 0)
+ return compr_blocks;
+
for (i = 0; i < cc->cluster_size; i++) {
if (!cc->rpages[i])
continue;
retry_write:
+ lock_page(cc->rpages[i]);
+
if (cc->rpages[i]->mapping != mapping) {
+continue_unlock:
unlock_page(cc->rpages[i]);
continue;
}
- BUG_ON(!PageLocked(cc->rpages[i]));
+ if (!PageDirty(cc->rpages[i]))
+ goto continue_unlock;
+
+ if (!clear_page_dirty_for_io(cc->rpages[i]))
+ goto continue_unlock;
ret = f2fs_write_single_data_page(cc->rpages[i], &_submitted,
NULL, NULL, wbc, io_type,
@@ -1395,26 +1408,15 @@ retry_write:
* avoid deadlock caused by cluster update race
* from foreground operation.
*/
- if (IS_NOQUOTA(cc->inode)) {
- err = 0;
- goto out_err;
- }
+ if (IS_NOQUOTA(cc->inode))
+ return 0;
ret = 0;
cond_resched();
congestion_wait(BLK_RW_ASYNC,
DEFAULT_IO_TIMEOUT);
- lock_page(cc->rpages[i]);
-
- if (!PageDirty(cc->rpages[i])) {
- unlock_page(cc->rpages[i]);
- continue;
- }
-
- clear_page_dirty_for_io(cc->rpages[i]);
goto retry_write;
}
- err = ret;
- goto out_err;
+ return ret;
}
*submitted += _submitted;
@@ -1423,14 +1425,6 @@ retry_write:
f2fs_balance_fs(F2FS_M_SB(mapping), true);
return 0;
-out_err:
- for (++i; i < cc->cluster_size; i++) {
- if (!cc->rpages[i])
- continue;
- redirty_page_for_writepage(wbc, cc->rpages[i]);
- unlock_page(cc->rpages[i]);
- }
- return err;
}
int f2fs_write_multi_pages(struct compress_ctx *cc,
From: Robert Hancock <[email protected]>
commit 996defd7f8b5dafc1d480b7585c7c62437f80c3c upstream.
The check for whether a TX ring slot was available was incorrect,
since a slot which had been loaded with transmit data but the device had
not started transmitting would be treated as available, potentially
causing non-transmitted slots to be overwritten. The control field in
the descriptor should be checked, rather than the status field (which may
only be updated when the device completes the entry).
Fixes: 8a3b7a252dca9 ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Robert Hancock <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -643,7 +643,6 @@ static int axienet_free_tx_chain(struct
if (cur_p->skb && (status & XAXIDMA_BD_STS_COMPLETE_MASK))
dev_consume_skb_irq(cur_p->skb);
- cur_p->cntrl = 0;
cur_p->app0 = 0;
cur_p->app1 = 0;
cur_p->app2 = 0;
@@ -651,6 +650,7 @@ static int axienet_free_tx_chain(struct
cur_p->skb = NULL;
/* ensure our transmit path and device don't prematurely see status cleared */
wmb();
+ cur_p->cntrl = 0;
cur_p->status = 0;
if (sizep)
@@ -713,7 +713,7 @@ static inline int axienet_check_tx_bd_sp
/* Ensure we see all descriptor updates from device or TX IRQ path */
rmb();
cur_p = &lp->tx_bd_v[(lp->tx_bd_tail + num_frag) % lp->tx_bd_num];
- if (cur_p->status & XAXIDMA_BD_STS_ALL_MASK)
+ if (cur_p->cntrl)
return NETDEV_TX_BUSY;
return 0;
}
From: Zechuan Chen <[email protected]>
commit 4624f199327a704dd1069aca1c3cadb8f2a28c6f upstream.
Because of commit bf794bf52a80c627 ("powerpc/kprobes: Fix kallsyms
lookup across powerpc ABIv1 and ABIv2"), in ppc64 ABIv1, our perf
command eliminates the need to use the prefix "." at the symbol name.
But when the command "perf probe -a schedule" is executed on ppc64
ABIv1, it obtains two symbol address information through /proc/kallsyms,
for example:
cat /proc/kallsyms | grep -w schedule
c000000000657020 T .schedule
c000000000d4fdb8 D schedule
The symbol "D schedule" is not a function symbol, and perf will print:
"p:probe/schedule _text+13958584"Failed to write event: Invalid argument
Therefore, when searching symbols from map and adding probe point for
them, a symbol type check is added. If the type of symbol is not a
function, skip it.
Fixes: bf794bf52a80c627 ("powerpc/kprobes: Fix kallsyms lookup across powerpc ABIv1 and ABIv2")
Signed-off-by: Zechuan Chen <[email protected]>
Acked-by: Masami Hiramatsu <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jianlin Lv <[email protected]>
Cc: Jin Yao <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Naveen N. Rao <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: Yang Jihong <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/perf/util/probe-event.c | 3 +++
1 file changed, 3 insertions(+)
--- a/tools/perf/util/probe-event.c
+++ b/tools/perf/util/probe-event.c
@@ -3035,6 +3035,9 @@ static int find_probe_trace_events_from_
for (j = 0; j < num_matched_functions; j++) {
sym = syms[j];
+ if (sym->type != STT_FUNC)
+ continue;
+
/* There can be duplicated symbols in the map */
for (i = 0; i < j; i++)
if (sym->start == syms[i]->start) {
From: Tudor Ambarus <[email protected]>
commit e6af9b05bec63cd4d1de2a33968cd0be2a91282a upstream.
Cyclic channels must too call issue_pending in order to start a transfer.
Start the transfer in issue_pending regardless of the type of channel.
This wrongly worked before, because in the past the transfer was started
at tx_submit level when only a desc in the transfer list.
Fixes: e1f7c9eee707 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver")
Signed-off-by: Tudor Ambarus <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/dma/at_xdmac.c | 8 +++-----
1 file changed, 3 insertions(+), 5 deletions(-)
--- a/drivers/dma/at_xdmac.c
+++ b/drivers/dma/at_xdmac.c
@@ -1718,11 +1718,9 @@ static void at_xdmac_issue_pending(struc
dev_dbg(chan2dev(&atchan->chan), "%s\n", __func__);
- if (!at_xdmac_chan_is_cyclic(atchan)) {
- spin_lock_irqsave(&atchan->lock, flags);
- at_xdmac_advance_work(atchan);
- spin_unlock_irqrestore(&atchan->lock, flags);
- }
+ spin_lock_irqsave(&atchan->lock, flags);
+ at_xdmac_advance_work(atchan);
+ spin_unlock_irqrestore(&atchan->lock, flags);
return;
}
From: Alistair Popple <[email protected]>
commit 87c01d57fa23de82fff593a7d070933d08755801 upstream.
hmm_range_fault() can be used instead of get_user_pages() for devices
which allow faulting however unlike get_user_pages() it will return an
error when used on a VM_MIXEDMAP range.
To make hmm_range_fault() more closely match get_user_pages() remove
this restriction. This requires dealing with the !ARCH_HAS_PTE_SPECIAL
case in hmm_vma_handle_pte(). Rather than replicating the logic of
vm_normal_page() call it directly and do a check for the zero pfn
similar to what get_user_pages() currently does.
Also add a test to hmm selftest to verify functionality.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: da4c3c735ea4 ("mm/hmm/mirror: helper to snapshot CPU page table")
Signed-off-by: Alistair Popple <[email protected]>
Reviewed-by: Jason Gunthorpe <[email protected]>
Cc: Jerome Glisse <[email protected]>
Cc: John Hubbard <[email protected]>
Cc: Zi Yan <[email protected]>
Cc: Ralph Campbell <[email protected]>
Cc: Felix Kuehling <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
lib/test_hmm.c | 24 ++++++++++++++++++
mm/hmm.c | 5 ++-
tools/testing/selftests/vm/hmm-tests.c | 42 +++++++++++++++++++++++++++++++++
3 files changed, 69 insertions(+), 2 deletions(-)
--- a/lib/test_hmm.c
+++ b/lib/test_hmm.c
@@ -965,9 +965,33 @@ static long dmirror_fops_unlocked_ioctl(
return 0;
}
+static int dmirror_fops_mmap(struct file *file, struct vm_area_struct *vma)
+{
+ unsigned long addr;
+
+ for (addr = vma->vm_start; addr < vma->vm_end; addr += PAGE_SIZE) {
+ struct page *page;
+ int ret;
+
+ page = alloc_page(GFP_KERNEL | __GFP_ZERO);
+ if (!page)
+ return -ENOMEM;
+
+ ret = vm_insert_page(vma, addr, page);
+ if (ret) {
+ __free_page(page);
+ return ret;
+ }
+ put_page(page);
+ }
+
+ return 0;
+}
+
static const struct file_operations dmirror_fops = {
.open = dmirror_fops_open,
.release = dmirror_fops_release,
+ .mmap = dmirror_fops_mmap,
.unlocked_ioctl = dmirror_fops_unlocked_ioctl,
.llseek = default_llseek,
.owner = THIS_MODULE,
--- a/mm/hmm.c
+++ b/mm/hmm.c
@@ -296,7 +296,8 @@ static int hmm_vma_handle_pte(struct mm_
* Since each architecture defines a struct page for the zero page, just
* fall through and treat it like a normal page.
*/
- if (pte_special(pte) && !pte_devmap(pte) &&
+ if (!vm_normal_page(walk->vma, addr, pte) &&
+ !pte_devmap(pte) &&
!is_zero_pfn(pte_pfn(pte))) {
if (hmm_pte_need_fault(hmm_vma_walk, pfn_req_flags, 0)) {
pte_unmap(ptep);
@@ -514,7 +515,7 @@ static int hmm_vma_walk_test(unsigned lo
struct hmm_range *range = hmm_vma_walk->range;
struct vm_area_struct *vma = walk->vma;
- if (!(vma->vm_flags & (VM_IO | VM_PFNMAP | VM_MIXEDMAP)) &&
+ if (!(vma->vm_flags & (VM_IO | VM_PFNMAP)) &&
vma->vm_flags & VM_READ)
return 0;
--- a/tools/testing/selftests/vm/hmm-tests.c
+++ b/tools/testing/selftests/vm/hmm-tests.c
@@ -1245,6 +1245,48 @@ TEST_F(hmm, anon_teardown)
/*
* Test memory snapshot without faulting in pages accessed by the device.
*/
+TEST_F(hmm, mixedmap)
+{
+ struct hmm_buffer *buffer;
+ unsigned long npages;
+ unsigned long size;
+ unsigned char *m;
+ int ret;
+
+ npages = 1;
+ size = npages << self->page_shift;
+
+ buffer = malloc(sizeof(*buffer));
+ ASSERT_NE(buffer, NULL);
+
+ buffer->fd = -1;
+ buffer->size = size;
+ buffer->mirror = malloc(npages);
+ ASSERT_NE(buffer->mirror, NULL);
+
+
+ /* Reserve a range of addresses. */
+ buffer->ptr = mmap(NULL, size,
+ PROT_READ | PROT_WRITE,
+ MAP_PRIVATE,
+ self->fd, 0);
+ ASSERT_NE(buffer->ptr, MAP_FAILED);
+
+ /* Simulate a device snapshotting CPU pagetables. */
+ ret = hmm_dmirror_cmd(self->fd, HMM_DMIRROR_SNAPSHOT, buffer, npages);
+ ASSERT_EQ(ret, 0);
+ ASSERT_EQ(buffer->cpages, npages);
+
+ /* Check what the device saw. */
+ m = buffer->mirror;
+ ASSERT_EQ(m[0], HMM_DMIRROR_PROT_READ);
+
+ hmm_buffer_free(buffer);
+}
+
+/*
+ * Test memory snapshot without faulting in pages accessed by the device.
+ */
TEST_F(hmm2, snapshot)
{
struct hmm_buffer *buffer;
From: Tudor Ambarus <[email protected]>
commit bccfb96b59179d4f96cbbd1ddff8fac6d335eae4 upstream.
tx_submit is supposed to push the current transaction descriptor to a
pending queue, waiting for issue_pending() to be called. issue_pending()
must start the transfer, not tx_submit(), thus remove
at_xdmac_start_xfer() from at_xdmac_tx_submit(). Clients of at_xdmac that
assume that tx_submit() starts the transfer must be updated and call
dma_async_issue_pending() if they miss to call it (one example is
atmel_serial).
As the at_xdmac_start_xfer() is now called only from
at_xdmac_advance_work() when !at_xdmac_chan_is_enabled(), the
at_xdmac_chan_is_enabled() check is no longer needed in
at_xdmac_start_xfer(), thus remove it.
Fixes: e1f7c9eee707 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver")
Signed-off-by: Tudor Ambarus <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/dma/at_xdmac.c | 6 ------
1 file changed, 6 deletions(-)
--- a/drivers/dma/at_xdmac.c
+++ b/drivers/dma/at_xdmac.c
@@ -338,9 +338,6 @@ static void at_xdmac_start_xfer(struct a
dev_vdbg(chan2dev(&atchan->chan), "%s: desc 0x%p\n", __func__, first);
- if (at_xdmac_chan_is_enabled(atchan))
- return;
-
/* Set transfer as active to not try to start it again. */
first->active_xfer = true;
@@ -430,9 +427,6 @@ static dma_cookie_t at_xdmac_tx_submit(s
dev_vdbg(chan2dev(tx->chan), "%s: atchan 0x%p, add desc 0x%p to xfers_list\n",
__func__, atchan, desc);
list_add_tail(&desc->xfer_node, &atchan->xfers_list);
- if (list_is_singular(&atchan->xfers_list))
- at_xdmac_start_xfer(atchan, desc);
-
spin_unlock_irqrestore(&atchan->lock, irqflags);
return cookie;
}
From: Tudor Ambarus <[email protected]>
commit 912f7c6f7fac273f40e621447cf17d14b50d6e5b upstream.
The hardware channel next descriptor view structure contains just
fields of 32 bits, while dma_addr_t can be of type u64 or u32
depending on CONFIG_ARCH_DMA_ADDR_T_64BIT. Force u32 to comply with
what the hardware expects.
Fixes: e1f7c9eee707 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver")
Signed-off-by: Tudor Ambarus <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/dma/at_xdmac.c | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
--- a/drivers/dma/at_xdmac.c
+++ b/drivers/dma/at_xdmac.c
@@ -221,15 +221,15 @@ struct at_xdmac {
/* Linked List Descriptor */
struct at_xdmac_lld {
- dma_addr_t mbr_nda; /* Next Descriptor Member */
- u32 mbr_ubc; /* Microblock Control Member */
- dma_addr_t mbr_sa; /* Source Address Member */
- dma_addr_t mbr_da; /* Destination Address Member */
- u32 mbr_cfg; /* Configuration Register */
- u32 mbr_bc; /* Block Control Register */
- u32 mbr_ds; /* Data Stride Register */
- u32 mbr_sus; /* Source Microblock Stride Register */
- u32 mbr_dus; /* Destination Microblock Stride Register */
+ u32 mbr_nda; /* Next Descriptor Member */
+ u32 mbr_ubc; /* Microblock Control Member */
+ u32 mbr_sa; /* Source Address Member */
+ u32 mbr_da; /* Destination Address Member */
+ u32 mbr_cfg; /* Configuration Register */
+ u32 mbr_bc; /* Block Control Register */
+ u32 mbr_ds; /* Data Stride Register */
+ u32 mbr_sus; /* Source Microblock Stride Register */
+ u32 mbr_dus; /* Destination Microblock Stride Register */
};
/* 64-bit alignment needed to update CNDA and CUBC registers in an atomic way. */
From: Tobias Waldekranz <[email protected]>
commit 6198c722019774d38018457a8bfb9ba3ed8c931e upstream.
Once an MDIO read transaction is initiated, we must read back the data
register within 16 MDC cycles after the transaction completes. Outside
of this window, reads may return corrupt data.
Therefore, disable local interrupts in the critical section, to
maximize the probability that we can satisfy this requirement.
Fixes: d55ad2967d89 ("powerpc/mpc85xx: Create dts components for the FSL QorIQ DPAA FMan")
Signed-off-by: Tobias Waldekranz <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/freescale/xgmac_mdio.c | 25 +++++++++++++++++++------
1 file changed, 19 insertions(+), 6 deletions(-)
--- a/drivers/net/ethernet/freescale/xgmac_mdio.c
+++ b/drivers/net/ethernet/freescale/xgmac_mdio.c
@@ -49,6 +49,7 @@ struct tgec_mdio_controller {
struct mdio_fsl_priv {
struct tgec_mdio_controller __iomem *mdio_base;
bool is_little_endian;
+ bool has_a009885;
bool has_a011043;
};
@@ -184,10 +185,10 @@ static int xgmac_mdio_read(struct mii_bu
{
struct mdio_fsl_priv *priv = (struct mdio_fsl_priv *)bus->priv;
struct tgec_mdio_controller __iomem *regs = priv->mdio_base;
+ unsigned long flags;
uint16_t dev_addr;
uint32_t mdio_stat;
uint32_t mdio_ctl;
- uint16_t value;
int ret;
bool endian = priv->is_little_endian;
@@ -219,12 +220,18 @@ static int xgmac_mdio_read(struct mii_bu
return ret;
}
+ if (priv->has_a009885)
+ /* Once the operation completes, i.e. MDIO_STAT_BSY clears, we
+ * must read back the data register within 16 MDC cycles.
+ */
+ local_irq_save(flags);
+
/* Initiate the read */
xgmac_write32(mdio_ctl | MDIO_CTL_READ, ®s->mdio_ctl, endian);
ret = xgmac_wait_until_done(&bus->dev, regs, endian);
if (ret)
- return ret;
+ goto irq_restore;
/* Return all Fs if nothing was there */
if ((xgmac_read32(®s->mdio_stat, endian) & MDIO_STAT_RD_ER) &&
@@ -232,13 +239,17 @@ static int xgmac_mdio_read(struct mii_bu
dev_dbg(&bus->dev,
"Error while reading PHY%d reg at %d.%hhu\n",
phy_id, dev_addr, regnum);
- return 0xffff;
+ ret = 0xffff;
+ } else {
+ ret = xgmac_read32(®s->mdio_data, endian) & 0xffff;
+ dev_dbg(&bus->dev, "read %04x\n", ret);
}
- value = xgmac_read32(®s->mdio_data, endian) & 0xffff;
- dev_dbg(&bus->dev, "read %04x\n", value);
+irq_restore:
+ if (priv->has_a009885)
+ local_irq_restore(flags);
- return value;
+ return ret;
}
static int xgmac_mdio_probe(struct platform_device *pdev)
@@ -282,6 +293,8 @@ static int xgmac_mdio_probe(struct platf
priv->is_little_endian = device_property_read_bool(&pdev->dev,
"little-endian");
+ priv->has_a009885 = device_property_read_bool(&pdev->dev,
+ "fsl,erratum-a009885");
priv->has_a011043 = device_property_read_bool(&pdev->dev,
"fsl,erratum-a011043");
From: Toke Høiland-Jørgensen <[email protected]>
commit 382778edc8262b7535f00523e9eb22edba1b9816 upstream.
The bpf_xdp_link_update() function didn't check the program type before
updating the program, which made it possible to install any program type as
an XDP program, which is obviously not good. Syzbot managed to trigger this
by swapping in an LWT program on the XDP hook which would crash in a helper
call.
Fix this by adding a check and bailing out if the types don't match.
Fixes: 026a4c28e1db ("bpf, xdp: Implement LINK_UPDATE for BPF XDP link")
Reported-by: [email protected]
Acked-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Toke Høiland-Jørgensen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/core/dev.c | 6 ++++++
1 file changed, 6 insertions(+)
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -9339,6 +9339,12 @@ static int bpf_xdp_link_update(struct bp
goto out_unlock;
}
old_prog = link->prog;
+ if (old_prog->type != new_prog->type ||
+ old_prog->expected_attach_type != new_prog->expected_attach_type) {
+ err = -EINVAL;
+ goto out_unlock;
+ }
+
if (old_prog == new_prog) {
/* no-op, don't disturb drivers */
bpf_prog_put(new_prog);
From: Russell King <[email protected]>
commit b89ddf4cca43f1269093942cf5c4e457fd45c335 upstream.
Commit 91fc957c9b1d ("arm64/bpf: don't allocate BPF JIT programs in module
memory") restricts BPF JIT program allocation to a 128MB region to ensure
BPF programs are still in branching range of each other. However this
restriction should not apply to the aarch64 JIT, since BPF_JMP | BPF_CALL
are implemented as a 64-bit move into a register and then a BLR instruction -
which has the effect of being able to call anything without proximity
limitation.
The practical reason to relax this restriction on JIT memory is that 128MB of
JIT memory can be quickly exhausted, especially where PAGE_SIZE is 64KB - one
page is needed per program. In cases where seccomp filters are applied to
multiple VMs on VM launch - such filters are classic BPF but converted to
BPF - this can severely limit the number of VMs that can be launched. In a
world where we support BPF JIT always on, turning off the JIT isn't always an
option either.
Fixes: 91fc957c9b1d ("arm64/bpf: don't allocate BPF JIT programs in module memory")
Suggested-by: Ard Biesheuvel <[email protected]>
Signed-off-by: Russell King <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Tested-by: Alan Maguire <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm64/include/asm/extable.h | 9 ---------
arch/arm64/include/asm/memory.h | 5 +----
arch/arm64/kernel/traps.c | 2 +-
arch/arm64/mm/ptdump.c | 2 --
arch/arm64/net/bpf_jit_comp.c | 7 ++-----
5 files changed, 4 insertions(+), 21 deletions(-)
--- a/arch/arm64/include/asm/extable.h
+++ b/arch/arm64/include/asm/extable.h
@@ -22,15 +22,6 @@ struct exception_table_entry
#define ARCH_HAS_RELATIVE_EXTABLE
-static inline bool in_bpf_jit(struct pt_regs *regs)
-{
- if (!IS_ENABLED(CONFIG_BPF_JIT))
- return false;
-
- return regs->pc >= BPF_JIT_REGION_START &&
- regs->pc < BPF_JIT_REGION_END;
-}
-
#ifdef CONFIG_BPF_JIT
int arm64_bpf_fixup_exception(const struct exception_table_entry *ex,
struct pt_regs *regs);
--- a/arch/arm64/include/asm/memory.h
+++ b/arch/arm64/include/asm/memory.h
@@ -44,11 +44,8 @@
#define _PAGE_OFFSET(va) (-(UL(1) << (va)))
#define PAGE_OFFSET (_PAGE_OFFSET(VA_BITS))
#define KIMAGE_VADDR (MODULES_END)
-#define BPF_JIT_REGION_START (KASAN_SHADOW_END)
-#define BPF_JIT_REGION_SIZE (SZ_128M)
-#define BPF_JIT_REGION_END (BPF_JIT_REGION_START + BPF_JIT_REGION_SIZE)
#define MODULES_END (MODULES_VADDR + MODULES_VSIZE)
-#define MODULES_VADDR (BPF_JIT_REGION_END)
+#define MODULES_VADDR (_PAGE_END(VA_BITS_MIN))
#define MODULES_VSIZE (SZ_128M)
#define VMEMMAP_START (-VMEMMAP_SIZE - SZ_2M)
#define VMEMMAP_END (VMEMMAP_START + VMEMMAP_SIZE)
--- a/arch/arm64/kernel/traps.c
+++ b/arch/arm64/kernel/traps.c
@@ -923,7 +923,7 @@ static struct break_hook bug_break_hook
static int reserved_fault_handler(struct pt_regs *regs, unsigned int esr)
{
pr_err("%s generated an invalid instruction at %pS!\n",
- in_bpf_jit(regs) ? "BPF JIT" : "Kernel text patching",
+ "Kernel text patching",
(void *)instruction_pointer(regs));
/* We cannot handle this */
--- a/arch/arm64/mm/ptdump.c
+++ b/arch/arm64/mm/ptdump.c
@@ -41,8 +41,6 @@ static struct addr_marker address_marker
{ 0 /* KASAN_SHADOW_START */, "Kasan shadow start" },
{ KASAN_SHADOW_END, "Kasan shadow end" },
#endif
- { BPF_JIT_REGION_START, "BPF start" },
- { BPF_JIT_REGION_END, "BPF end" },
{ MODULES_VADDR, "Modules start" },
{ MODULES_END, "Modules end" },
{ VMALLOC_START, "vmalloc() area" },
--- a/arch/arm64/net/bpf_jit_comp.c
+++ b/arch/arm64/net/bpf_jit_comp.c
@@ -1136,15 +1136,12 @@ out:
u64 bpf_jit_alloc_exec_limit(void)
{
- return BPF_JIT_REGION_SIZE;
+ return VMALLOC_END - VMALLOC_START;
}
void *bpf_jit_alloc_exec(unsigned long size)
{
- return __vmalloc_node_range(size, PAGE_SIZE, BPF_JIT_REGION_START,
- BPF_JIT_REGION_END, GFP_KERNEL,
- PAGE_KERNEL, 0, NUMA_NO_NODE,
- __builtin_return_address(0));
+ return vmalloc(size);
}
void bpf_jit_free_exec(void *addr)
From: Guillaume Nault <[email protected]>
commit a915deaa9abe4fb3a440312c954253a6a733608e upstream.
Mask the ECN bits before calling ip_route_output_ports(). The tos
variable might be passed directly from an IPv4 header, so it may have
the last ECN bit set. This interferes with the route lookup process as
ip_route_output_key_hash() interpretes this bit specially (to restrict
the route scope).
Found by code inspection, compile tested only.
Fixes: 804c2f3e36ef ("libcxgb,iw_cxgb4,cxgbit: add cxgb_find_route()")
Signed-off-by: Guillaume Nault <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/chelsio/libcxgb/libcxgb_cm.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/net/ethernet/chelsio/libcxgb/libcxgb_cm.c
+++ b/drivers/net/ethernet/chelsio/libcxgb/libcxgb_cm.c
@@ -32,6 +32,7 @@
#include <linux/tcp.h>
#include <linux/ipv6.h>
+#include <net/inet_ecn.h>
#include <net/route.h>
#include <net/ip6_route.h>
@@ -99,7 +100,7 @@ cxgb_find_route(struct cxgb4_lld_info *l
rt = ip_route_output_ports(&init_net, &fl4, NULL, peer_ip, local_ip,
peer_port, local_port, IPPROTO_TCP,
- tos, 0);
+ tos & ~INET_ECN_MASK, 0);
if (IS_ERR(rt))
return NULL;
n = dst_neigh_lookup(&rt->dst, &peer_ip);
From: Jie Wang <[email protected]>
commit 4e5bd03ae34652cd932ab4c91c71c511793df75c upstream.
In Linux bonding scenario, one packet is copied to several copies and sent
by all slave device of bond0 in mode 3(broadcast mode). The mode 3 xmit
function bond_xmit_broadcast() only ueses the last slave device's tx result
as the final result. In this case, if the last slave device is down, then
it always return NET_XMIT_DROP, even though the other slave devices xmit
success. It may cause the tx statistics error, and cause the application
(e.g. scp) consider the network is unreachable.
For example, use the following command to configure server A.
echo 3 > /sys/class/net/bond0/bonding/mode
ifconfig bond0 up
ifenslave bond0 eth0 eth1
ifconfig bond0 192.168.1.125
ifconfig eth0 up
ifconfig eth1 down
The slave device eth0 and eth1 are connected to server B(192.168.1.107).
Run the ping 192.168.1.107 -c 3 -i 0.2 command, the following information
is displayed.
PING 192.168.1.107 (192.168.1.107) 56(84) bytes of data.
64 bytes from 192.168.1.107: icmp_seq=1 ttl=64 time=0.077 ms
64 bytes from 192.168.1.107: icmp_seq=2 ttl=64 time=0.056 ms
64 bytes from 192.168.1.107: icmp_seq=3 ttl=64 time=0.051 ms
192.168.1.107 ping statistics
0 packets transmitted, 3 received
Actually, the slave device eth0 of the bond successfully sends three
ICMP packets, but the result shows that 0 packets are transmitted.
Also if we use scp command to get remote files, the command end with the
following printings.
ssh_exchange_identification: read: Connection timed out
So this patch modifies the bond_xmit_broadcast to return NET_XMIT_SUCCESS
if one slave device in the bond sends packets successfully. If all slave
devices send packets fail, the discarded packets stats is increased. The
skb is released when there is no slave device in the bond or the last slave
device is down.
Fixes: ae46f184bc1f ("bonding: propagate transmit status")
Signed-off-by: Jie Wang <[email protected]>
Signed-off-by: Guangbin Huang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/bonding/bond_main.c | 30 ++++++++++++++++++++++--------
1 file changed, 22 insertions(+), 8 deletions(-)
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -4562,25 +4562,39 @@ static netdev_tx_t bond_xmit_broadcast(s
struct bonding *bond = netdev_priv(bond_dev);
struct slave *slave = NULL;
struct list_head *iter;
+ bool xmit_suc = false;
+ bool skb_used = false;
bond_for_each_slave_rcu(bond, slave, iter) {
- if (bond_is_last_slave(bond, slave))
- break;
- if (bond_slave_is_up(slave) && slave->link == BOND_LINK_UP) {
- struct sk_buff *skb2 = skb_clone(skb, GFP_ATOMIC);
+ struct sk_buff *skb2;
+ if (!(bond_slave_is_up(slave) && slave->link == BOND_LINK_UP))
+ continue;
+
+ if (bond_is_last_slave(bond, slave)) {
+ skb2 = skb;
+ skb_used = true;
+ } else {
+ skb2 = skb_clone(skb, GFP_ATOMIC);
if (!skb2) {
net_err_ratelimited("%s: Error: %s: skb_clone() failed\n",
bond_dev->name, __func__);
continue;
}
- bond_dev_queue_xmit(bond, skb2, slave->dev);
}
+
+ if (bond_dev_queue_xmit(bond, skb2, slave->dev) == NETDEV_TX_OK)
+ xmit_suc = true;
}
- if (slave && bond_slave_is_up(slave) && slave->link == BOND_LINK_UP)
- return bond_dev_queue_xmit(bond, skb, slave->dev);
- return bond_tx_drop(bond_dev, skb);
+ if (!skb_used)
+ dev_kfree_skb_any(skb);
+
+ if (xmit_suc)
+ return NETDEV_TX_OK;
+
+ atomic_long_inc(&bond_dev->tx_dropped);
+ return NET_XMIT_DROP;
}
/*------------------------- Device initialization ---------------------------*/
From: Paul Cercueil <[email protected]>
commit 0697f8441faad552fbeb02d74454b5e7bcc956a2 upstream.
The original comment that describes the function
nand_davinci_read_page_hwecc_oob_first() is very obscure and it is hard
to understand what it is for.
Cc: <[email protected]> # v5.2
Fixes: a0ac778eb82c ("mtd: rawnand: ingenic: Add support for the JZ4740")
Signed-off-by: Paul Cercueil <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mtd/nand/raw/davinci_nand.c | 10 ++++------
1 file changed, 4 insertions(+), 6 deletions(-)
--- a/drivers/mtd/nand/raw/davinci_nand.c
+++ b/drivers/mtd/nand/raw/davinci_nand.c
@@ -372,17 +372,15 @@ correct:
}
/**
- * nand_read_page_hwecc_oob_first - hw ecc, read oob first
+ * nand_davinci_read_page_hwecc_oob_first - Hardware ECC page read with ECC
+ * data read from OOB area
* @chip: nand chip info structure
* @buf: buffer to store read data
* @oob_required: caller requires OOB data read to chip->oob_poi
* @page: page number to read
*
- * Hardware ECC for large page chips, require OOB to be read first. For this
- * ECC mode, the write_page method is re-used from ECC_HW. These methods
- * read/write ECC from the OOB area, unlike the ECC_HW_SYNDROME support with
- * multiple ECC steps, follows the "infix ECC" scheme and reads/writes ECC from
- * the data area, by overwriting the NAND manufacturer bad block markings.
+ * Hardware ECC for large page chips, which requires the ECC data to be
+ * extracted from the OOB before the actual data is read.
*/
static int nand_davinci_read_page_hwecc_oob_first(struct nand_chip *chip,
uint8_t *buf,
From: Mateusz Jończyk <[email protected]>
commit 454f47ff464325223129b9b5b8d0b61946ec704d upstream.
Reading from the CMOS involves writing to the index register and then
reading from the data register. Therefore access to the CMOS has to be
serialized with rtc_lock. This invocation of CMOS_READ was not
serialized, which could cause trouble when other code is accessing CMOS
at the same time.
Use spin_lock_irq() like the rest of the function.
Nothing in kernel modifies the RTC_DM_BINARY bit, so there could be a
separate pair of spin_lock_irq() / spin_unlock_irq() before doing the
math.
Signed-off-by: Mateusz Jończyk <[email protected]>
Reviewed-by: Nobuhiro Iwamatsu <[email protected]>
Cc: Alessandro Zummo <[email protected]>
Cc: Alexandre Belloni <[email protected]>
Cc: [email protected]
Signed-off-by: Alexandre Belloni <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/rtc/rtc-cmos.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/rtc/rtc-cmos.c
+++ b/drivers/rtc/rtc-cmos.c
@@ -463,7 +463,10 @@ static int cmos_set_alarm(struct device
min = t->time.tm_min;
sec = t->time.tm_sec;
+ spin_lock_irq(&rtc_lock);
rtc_control = CMOS_READ(RTC_CONTROL);
+ spin_unlock_irq(&rtc_lock);
+
if (!(rtc_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
/* Writing 0xff means "don't care" or "match all". */
mon = (mon <= 12) ? bin2bcd(mon) : 0xff;
From: Paul Cercueil <[email protected]>
commit 71e89591502d737c10db2bd4d8fcfaa352552afb upstream.
The function nand_davinci_read_page_hwecc_oob_first() does read the ECC
data from the OOB area. Therefore it does not need to calculate the ECC
as it is already available.
Cc: <[email protected]> # v5.2
Fixes: a0ac778eb82c ("mtd: rawnand: ingenic: Add support for the JZ4740")
Signed-off-by: Paul Cercueil <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mtd/nand/raw/davinci_nand.c | 3 ---
1 file changed, 3 deletions(-)
--- a/drivers/mtd/nand/raw/davinci_nand.c
+++ b/drivers/mtd/nand/raw/davinci_nand.c
@@ -394,7 +394,6 @@ static int nand_davinci_read_page_hwecc_
int eccsteps = chip->ecc.steps;
uint8_t *p = buf;
uint8_t *ecc_code = chip->ecc.code_buf;
- uint8_t *ecc_calc = chip->ecc.calc_buf;
unsigned int max_bitflips = 0;
/* Read the OOB area first */
@@ -420,8 +419,6 @@ static int nand_davinci_read_page_hwecc_
if (ret)
return ret;
- chip->ecc.calculate(chip, p, &ecc_calc[i]);
-
stat = chip->ecc.correct(chip, p, &ecc_code[i], NULL);
if (stat == -EBADMSG &&
(chip->ecc.options & NAND_ECC_GENERIC_ERASED_CHECK)) {
From: Andreas Oetken <[email protected]>
commit 2966daf7d253d9904b337b040dd7a43472858b8a upstream.
Not the child partition should be removed from the partition list
but the partition itself. Otherwise the partition list gets broken
and any subsequent remove operations leads to a kernel panic.
Fixes: 46b5889cc2c5 ("mtd: implement proper partition handling")
Signed-off-by: Andreas Oetken <[email protected]>
Cc: [email protected]
Signed-off-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mtd/mtdpart.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
@@ -313,7 +313,7 @@ static int __mtd_del_partition(struct mt
if (err)
return err;
- list_del(&child->part.node);
+ list_del(&mtd->part.node);
free_partition(mtd);
return 0;
From: Johan Hovold <[email protected]>
commit d9b7e8df3aa9b8c10708aab60e72e79ac08237e4 upstream.
USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.
Fixes: a6c2ba283565 ("[PATCH] v4l: 716: support for em28xx board family")
Cc: [email protected] # 2.6.16
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/usb/em28xx/em28xx-core.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/media/usb/em28xx/em28xx-core.c
+++ b/drivers/media/usb/em28xx/em28xx-core.c
@@ -89,7 +89,7 @@ int em28xx_read_reg_req_len(struct em28x
mutex_lock(&dev->ctrl_urb_lock);
ret = usb_control_msg(udev, pipe, req,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
- 0x0000, reg, dev->urb_buf, len, HZ);
+ 0x0000, reg, dev->urb_buf, len, 1000);
if (ret < 0) {
em28xx_regdbg("(pipe 0x%08x): IN: %02x %02x %02x %02x %02x %02x %02x %02x failed with error %i\n",
pipe,
@@ -158,7 +158,7 @@ int em28xx_write_regs_req(struct em28xx
memcpy(dev->urb_buf, buf, len);
ret = usb_control_msg(udev, pipe, req,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
- 0x0000, reg, dev->urb_buf, len, HZ);
+ 0x0000, reg, dev->urb_buf, len, 1000);
mutex_unlock(&dev->ctrl_urb_lock);
if (ret < 0) {
From: Johan Hovold <[email protected]>
commit 10729be03327f53258cb196362015ad5c6eabe02 upstream.
USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.
Fixes: ab33d5071de7 ("V4L/DVB (3376): Add cpia2 camera support")
Cc: [email protected] # 2.6.17
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/usb/cpia2/cpia2_usb.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/media/usb/cpia2/cpia2_usb.c
+++ b/drivers/media/usb/cpia2/cpia2_usb.c
@@ -550,7 +550,7 @@ static int write_packet(struct usb_devic
0, /* index */
buf, /* buffer */
size,
- HZ);
+ 1000);
kfree(buf);
return ret;
@@ -582,7 +582,7 @@ static int read_packet(struct usb_device
0, /* index */
buf, /* buffer */
size,
- HZ);
+ 1000);
if (ret >= 0)
memcpy(registers, buf, size);
From: Johan Hovold <[email protected]>
commit 2adc965c8bfa224e11ecccf9c92fd458c4236428 upstream.
USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.
Fixes: 2154be651b90 ("[media] redrat3: new rc-core IR transceiver device driver")
Cc: [email protected] # 3.0
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/rc/redrat3.c | 22 +++++++++++-----------
1 file changed, 11 insertions(+), 11 deletions(-)
--- a/drivers/media/rc/redrat3.c
+++ b/drivers/media/rc/redrat3.c
@@ -404,7 +404,7 @@ static int redrat3_send_cmd(int cmd, str
udev = rr3->udev;
res = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), cmd,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
- 0x0000, 0x0000, data, sizeof(u8), HZ * 10);
+ 0x0000, 0x0000, data, sizeof(u8), 10000);
if (res < 0) {
dev_err(rr3->dev, "%s: Error sending rr3 cmd res %d, data %d",
@@ -480,7 +480,7 @@ static u32 redrat3_get_timeout(struct re
pipe = usb_rcvctrlpipe(rr3->udev, 0);
ret = usb_control_msg(rr3->udev, pipe, RR3_GET_IR_PARAM,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
- RR3_IR_IO_SIG_TIMEOUT, 0, tmp, len, HZ * 5);
+ RR3_IR_IO_SIG_TIMEOUT, 0, tmp, len, 5000);
if (ret != len)
dev_warn(rr3->dev, "Failed to read timeout from hardware\n");
else {
@@ -510,7 +510,7 @@ static int redrat3_set_timeout(struct rc
ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), RR3_SET_IR_PARAM,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
RR3_IR_IO_SIG_TIMEOUT, 0, timeout, sizeof(*timeout),
- HZ * 25);
+ 25000);
dev_dbg(dev, "set ir parm timeout %d ret 0x%02x\n",
be32_to_cpu(*timeout), ret);
@@ -542,32 +542,32 @@ static void redrat3_reset(struct redrat3
*val = 0x01;
rc = usb_control_msg(udev, rxpipe, RR3_RESET,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
- RR3_CPUCS_REG_ADDR, 0, val, len, HZ * 25);
+ RR3_CPUCS_REG_ADDR, 0, val, len, 25000);
dev_dbg(dev, "reset returned 0x%02x\n", rc);
*val = length_fuzz;
rc = usb_control_msg(udev, txpipe, RR3_SET_IR_PARAM,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
- RR3_IR_IO_LENGTH_FUZZ, 0, val, len, HZ * 25);
+ RR3_IR_IO_LENGTH_FUZZ, 0, val, len, 25000);
dev_dbg(dev, "set ir parm len fuzz %d rc 0x%02x\n", *val, rc);
*val = (65536 - (minimum_pause * 2000)) / 256;
rc = usb_control_msg(udev, txpipe, RR3_SET_IR_PARAM,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
- RR3_IR_IO_MIN_PAUSE, 0, val, len, HZ * 25);
+ RR3_IR_IO_MIN_PAUSE, 0, val, len, 25000);
dev_dbg(dev, "set ir parm min pause %d rc 0x%02x\n", *val, rc);
*val = periods_measure_carrier;
rc = usb_control_msg(udev, txpipe, RR3_SET_IR_PARAM,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
- RR3_IR_IO_PERIODS_MF, 0, val, len, HZ * 25);
+ RR3_IR_IO_PERIODS_MF, 0, val, len, 25000);
dev_dbg(dev, "set ir parm periods measure carrier %d rc 0x%02x", *val,
rc);
*val = RR3_DRIVER_MAXLENS;
rc = usb_control_msg(udev, txpipe, RR3_SET_IR_PARAM,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
- RR3_IR_IO_MAX_LENGTHS, 0, val, len, HZ * 25);
+ RR3_IR_IO_MAX_LENGTHS, 0, val, len, 25000);
dev_dbg(dev, "set ir parm max lens %d rc 0x%02x\n", *val, rc);
kfree(val);
@@ -585,7 +585,7 @@ static void redrat3_get_firmware_rev(str
rc = usb_control_msg(rr3->udev, usb_rcvctrlpipe(rr3->udev, 0),
RR3_FW_VERSION,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
- 0, 0, buffer, RR3_FW_VERSION_LEN, HZ * 5);
+ 0, 0, buffer, RR3_FW_VERSION_LEN, 5000);
if (rc >= 0)
dev_info(rr3->dev, "Firmware rev: %s", buffer);
@@ -825,14 +825,14 @@ static int redrat3_transmit_ir(struct rc
pipe = usb_sndbulkpipe(rr3->udev, rr3->ep_out->bEndpointAddress);
ret = usb_bulk_msg(rr3->udev, pipe, irdata,
- sendbuf_len, &ret_len, 10 * HZ);
+ sendbuf_len, &ret_len, 10000);
dev_dbg(dev, "sent %d bytes, (ret %d)\n", ret_len, ret);
/* now tell the hardware to transmit what we sent it */
pipe = usb_rcvctrlpipe(rr3->udev, 0);
ret = usb_control_msg(rr3->udev, pipe, RR3_TX_SEND_SIGNAL,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
- 0, 0, irdata, 2, HZ * 10);
+ 0, 0, irdata, 2, 10000);
if (ret < 0)
dev_err(dev, "Error: control msg send failed, rc %d\n", ret);
From: Johan Hovold <[email protected]>
commit ced4913efb0acc844ed65cc01d091a85d83a2082 upstream.
In case device registration fails during probe, the driver state and
the embedded platform device structure needs to be freed using
platform_device_put() to properly free all resources (e.g. the device
name).
Fixes: 0a0b7a5f7a04 ("can: add driver for Softing card")
Link: https://lore.kernel.org/all/[email protected]
Cc: [email protected] # 2.6.38
Signed-off-by: Johan Hovold <[email protected]>
Reviewed-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/can/softing/softing_cs.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/can/softing/softing_cs.c
+++ b/drivers/net/can/softing/softing_cs.c
@@ -293,7 +293,7 @@ static int softingcs_probe(struct pcmcia
return 0;
platform_failed:
- kfree(dev);
+ platform_device_put(pdev);
mem_failed:
pcmcia_bad:
pcmcia_failed:
From: Jason Gerecke <[email protected]>
commit 546e41ac994cc185ef3de610ca849a294b5df3ba upstream.
These two values go hand-in-hand and must be valid for the driver to
behave correctly. We are currently lazy about updating the values and
rely on the "expected" code flow to take care of making sure they're
valid at the point they're needed. The "expected" flow changed somewhat
with commit f8b6a74719b5 ("HID: wacom: generic: Support multiple tools
per report"), however. This led to problems with the DTH-2452 due (in
part) to *all* contacts being fully processed -- even those past the
expected contact count. Specifically, the received count gets reset to
0 once all expected fingers are processed, but not the expected count.
The rest of the contacts in the report are then *also* processed since
now the driver thinks we've only processed 0 of N expected contacts.
Later commits such as 7fb0413baa7f (HID: wacom: Use "Confidence" flag to
prevent reporting invalid contacts) worked around the DTH-2452 issue by
skipping the invalid contacts at the end of the report, but this is not
a complete fix. The confidence flag cannot be relied on when a contact
is removed (see the following patch), and dealing with that condition
re-introduces the DTH-2452 issue unless we also address this contact
count laziness. By resetting expected and received counts at the same
time we ensure the driver understands that there are 0 more contacts
expected in the report. Similarly, we also make sure to reset the
received count if for some reason we're out of sync in the pre-report
phase.
Link: https://github.com/linuxwacom/input-wacom/issues/288
Fixes: f8b6a74719b5 ("HID: wacom: generic: Support multiple tools per report")
CC: [email protected]
Signed-off-by: Jason Gerecke <[email protected]>
Reviewed-by: Ping Cheng <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/hid/wacom_wac.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
--- a/drivers/hid/wacom_wac.c
+++ b/drivers/hid/wacom_wac.c
@@ -2664,11 +2664,14 @@ static void wacom_wac_finger_pre_report(
hid_data->cc_index >= 0) {
struct hid_field *field = report->field[hid_data->cc_index];
int value = field->value[hid_data->cc_value_index];
- if (value)
+ if (value) {
hid_data->num_expected = value;
+ hid_data->num_received = 0;
+ }
}
else {
hid_data->num_expected = wacom_wac->features.touch_max;
+ hid_data->num_received = 0;
}
}
@@ -2692,6 +2695,7 @@ static void wacom_wac_finger_report(stru
input_sync(input);
wacom_wac->hid_data.num_received = 0;
+ wacom_wac->hid_data.num_expected = 0;
/* keep touch state for pen event */
wacom_wac->shared->touch_down = wacom_wac_finger_count_touches(wacom_wac);
From: Johan Hovold <[email protected]>
commit b82bf9b9dc305d7d3d93eab106d70dbf2171b43e upstream.
USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.
Fixes: d855497edbfb ("V4L/DVB (4228a): pvrusb2 to kernel 2.6.18")
Cc: [email protected] # 2.6.18
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/usb/pvrusb2/pvrusb2-hdw.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/drivers/media/usb/pvrusb2/pvrusb2-hdw.c
+++ b/drivers/media/usb/pvrusb2/pvrusb2-hdw.c
@@ -1467,7 +1467,7 @@ static int pvr2_upload_firmware1(struct
for (address = 0; address < fwsize; address += 0x800) {
memcpy(fw_ptr, fw_entry->data + address, 0x800);
ret += usb_control_msg(hdw->usb_dev, pipe, 0xa0, 0x40, address,
- 0, fw_ptr, 0x800, HZ);
+ 0, fw_ptr, 0x800, 1000);
}
trace_firmware("Upload done, releasing device's CPU");
@@ -1605,7 +1605,7 @@ int pvr2_upload_firmware2(struct pvr2_hd
((u32 *)fw_ptr)[icnt] = swab32(((u32 *)fw_ptr)[icnt]);
ret |= usb_bulk_msg(hdw->usb_dev, pipe, fw_ptr,bcnt,
- &actual_length, HZ);
+ &actual_length, 1000);
ret |= (actual_length != bcnt);
if (ret) break;
fw_done += bcnt;
@@ -3438,7 +3438,7 @@ void pvr2_hdw_cpufw_set_enabled(struct p
0xa0,0xc0,
address,0,
hdw->fw_buffer+address,
- 0x800,HZ);
+ 0x800,1000);
if (ret < 0) break;
}
@@ -3977,7 +3977,7 @@ void pvr2_hdw_cpureset_assert(struct pvr
/* Write the CPUCS register on the 8051. The lsb of the register
is the reset bit; a 1 asserts reset while a 0 clears it. */
pipe = usb_sndctrlpipe(hdw->usb_dev, 0);
- ret = usb_control_msg(hdw->usb_dev,pipe,0xa0,0x40,0xe600,0,da,1,HZ);
+ ret = usb_control_msg(hdw->usb_dev,pipe,0xa0,0x40,0xe600,0,da,1,1000);
if (ret < 0) {
pvr2_trace(PVR2_TRACE_ERROR_LEGS,
"cpureset_assert(%d) error=%d",val,ret);
From: Hans Verkuil <[email protected]>
commit 713bdfa10b5957053811470d298def9537d9ff13 upstream.
The en/disable_irq() functions keep track of the 'depth': i.e. if
interrupts are disabled twice, then it needs to enable_irq() calls to
enable them again. The cec-pin framework didn't take this into accound
and could disable irqs multiple times, and it expected that a single
enable_irq() would enable them again.
Move all calls to en/disable_irq() to the kthread where it is easy
to keep track of the current irq state and ensure that multiple
en/disable_irq calls never happen.
If interrupts where disabled twice, then they would never turn on
again, leaving the CEC adapter in a dead state.
Signed-off-by: Hans Verkuil <[email protected]>
Fixes: 865463fc03ed (media: cec-pin: add error injection support)
Cc: <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/cec/core/cec-pin.c | 31 ++++++++++++++++++-------------
1 file changed, 18 insertions(+), 13 deletions(-)
--- a/drivers/media/cec/core/cec-pin.c
+++ b/drivers/media/cec/core/cec-pin.c
@@ -1033,6 +1033,7 @@ static int cec_pin_thread_func(void *_ad
{
struct cec_adapter *adap = _adap;
struct cec_pin *pin = adap->pin;
+ bool irq_enabled = false;
for (;;) {
wait_event_interruptible(pin->kthread_waitq,
@@ -1060,6 +1061,7 @@ static int cec_pin_thread_func(void *_ad
ns_to_ktime(pin->work_rx_msg.rx_ts));
msg->len = 0;
}
+
if (pin->work_tx_status) {
unsigned int tx_status = pin->work_tx_status;
@@ -1083,27 +1085,39 @@ static int cec_pin_thread_func(void *_ad
switch (atomic_xchg(&pin->work_irq_change,
CEC_PIN_IRQ_UNCHANGED)) {
case CEC_PIN_IRQ_DISABLE:
- pin->ops->disable_irq(adap);
+ if (irq_enabled) {
+ pin->ops->disable_irq(adap);
+ irq_enabled = false;
+ }
cec_pin_high(pin);
cec_pin_to_idle(pin);
hrtimer_start(&pin->timer, ns_to_ktime(0),
HRTIMER_MODE_REL);
break;
case CEC_PIN_IRQ_ENABLE:
+ if (irq_enabled)
+ break;
pin->enable_irq_failed = !pin->ops->enable_irq(adap);
if (pin->enable_irq_failed) {
cec_pin_to_idle(pin);
hrtimer_start(&pin->timer, ns_to_ktime(0),
HRTIMER_MODE_REL);
+ } else {
+ irq_enabled = true;
}
break;
default:
break;
}
-
if (kthread_should_stop())
break;
}
+ if (pin->ops->disable_irq && irq_enabled)
+ pin->ops->disable_irq(adap);
+ hrtimer_cancel(&pin->timer);
+ cec_pin_read(pin);
+ cec_pin_to_idle(pin);
+ pin->state = CEC_ST_OFF;
return 0;
}
@@ -1130,13 +1144,7 @@ static int cec_pin_adap_enable(struct ce
hrtimer_start(&pin->timer, ns_to_ktime(0),
HRTIMER_MODE_REL);
} else {
- if (pin->ops->disable_irq)
- pin->ops->disable_irq(adap);
- hrtimer_cancel(&pin->timer);
kthread_stop(pin->kthread);
- cec_pin_read(pin);
- cec_pin_to_idle(pin);
- pin->state = CEC_ST_OFF;
}
return 0;
}
@@ -1157,11 +1165,8 @@ void cec_pin_start_timer(struct cec_pin
if (pin->state != CEC_ST_RX_IRQ)
return;
- atomic_set(&pin->work_irq_change, CEC_PIN_IRQ_UNCHANGED);
- pin->ops->disable_irq(pin->adap);
- cec_pin_high(pin);
- cec_pin_to_idle(pin);
- hrtimer_start(&pin->timer, ns_to_ktime(0), HRTIMER_MODE_REL);
+ atomic_set(&pin->work_irq_change, CEC_PIN_IRQ_DISABLE);
+ wake_up_interruptible(&pin->kthread_waitq);
}
static int cec_pin_adap_transmit(struct cec_adapter *adap, u8 attempts,
From: Wang Hai <[email protected]>
[ Upstream commit acf20ed020ffa4d6cc8347e8d356509b95df3cbe ]
I got a null-ptr-deref report:
[drm:drm_dev_init [drm]] *ERROR* Cannot allocate anonymous inode: -12
==================================================================
BUG: KASAN: null-ptr-deref in iput+0x3c/0x4a0
...
Call Trace:
dump_stack_lvl+0x6c/0x8b
kasan_report.cold+0x64/0xdb
__asan_load8+0x69/0x90
iput+0x3c/0x4a0
drm_dev_init_release+0x39/0xb0 [drm]
drm_managed_release+0x158/0x2d0 [drm]
drm_dev_init+0x3a7/0x4c0 [drm]
__devm_drm_dev_alloc+0x55/0xd0 [drm]
mi0283qt_probe+0x8a/0x2b5 [mi0283qt]
spi_probe+0xeb/0x130
...
entry_SYSCALL_64_after_hwframe+0x44/0xae
If drm_fs_inode_new() fails in drm_dev_init(), dev->anon_inode will point
to PTR_ERR(...) instead of NULL. This will result in null-ptr-deref when
drm_fs_inode_free(dev->anon_inode) is called.
drm_dev_init()
drm_fs_inode_new() // fail, dev->anon_inode = PTR_ERR(...)
drm_managed_release()
drm_dev_init_release()
drm_fs_inode_free() // access non-existent anon_inode
Define a temp variable and assign it to dev->anon_inode if the temp
variable is not PTR_ERR.
Fixes: 2cbf7fc6718b ("drm: Use drmm_ for drm_dev_init cleanup")
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Wang Hai <[email protected]>
Signed-off-by: Sam Ravnborg <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/drm_drv.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/drm_drv.c b/drivers/gpu/drm/drm_drv.c
index cd162d406078a..006e3b896caea 100644
--- a/drivers/gpu/drm/drm_drv.c
+++ b/drivers/gpu/drm/drm_drv.c
@@ -577,6 +577,7 @@ static int drm_dev_init(struct drm_device *dev,
struct drm_driver *driver,
struct device *parent)
{
+ struct inode *inode;
int ret;
if (!drm_core_init_complete) {
@@ -613,13 +614,15 @@ static int drm_dev_init(struct drm_device *dev,
if (ret)
return ret;
- dev->anon_inode = drm_fs_inode_new();
- if (IS_ERR(dev->anon_inode)) {
- ret = PTR_ERR(dev->anon_inode);
+ inode = drm_fs_inode_new();
+ if (IS_ERR(inode)) {
+ ret = PTR_ERR(inode);
DRM_ERROR("Cannot allocate anonymous inode: %d\n", ret);
goto err;
}
+ dev->anon_inode = inode;
+
if (drm_core_check_feature(dev, DRIVER_RENDER)) {
ret = drm_minor_alloc(dev, DRM_MINOR_RENDER);
if (ret)
--
2.34.1
From: Dmitry Osipenko <[email protected]>
commit d5185965c3b59073c4520bad7dd2adf725b9abba upstream.
Host1x DMA buffer isn't mapped properly when CONFIG_ARM_DMA_USE_IOMMU=y.
The memory management code of Host1x driver has a longstanding overhaul
overdue and it's not obvious where the problem is in this case. Hence
let's add back the old workaround which we already had sometime before.
It explicitly detaches Host1x device from the offending implicit IOMMU
domain. This fixes a completely broken Host1x DMA in case of ARM32
multiplatform kernel config.
Cc: [email protected]
Fixes: af1cbfb9bf0f ("gpu: host1x: Support DMA mapping of buffers")
Signed-off-by: Dmitry Osipenko <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/host1x/dev.c | 15 +++++++++++++++
1 file changed, 15 insertions(+)
--- a/drivers/gpu/host1x/dev.c
+++ b/drivers/gpu/host1x/dev.c
@@ -18,6 +18,10 @@
#include <trace/events/host1x.h>
#undef CREATE_TRACE_POINTS
+#if IS_ENABLED(CONFIG_ARM_DMA_USE_IOMMU)
+#include <asm/dma-iommu.h>
+#endif
+
#include "bus.h"
#include "channel.h"
#include "debug.h"
@@ -232,6 +236,17 @@ static struct iommu_domain *host1x_iommu
struct iommu_domain *domain = iommu_get_domain_for_dev(host->dev);
int err;
+#if IS_ENABLED(CONFIG_ARM_DMA_USE_IOMMU)
+ if (host->dev->archdata.mapping) {
+ struct dma_iommu_mapping *mapping =
+ to_dma_iommu_mapping(host->dev);
+ arm_iommu_detach_device(host->dev);
+ arm_iommu_release_mapping(mapping);
+
+ domain = iommu_get_domain_for_dev(host->dev);
+ }
+#endif
+
/*
* We may not always want to enable IOMMU support (for example if the
* host1x firewall is already enabled and we don't support addressing
From: Brian Norris <[email protected]>
commit 514db871922f103886ad4d221cf406b4fcc5e74a upstream.
In commit 43c2de1002d2 ("drm/rockchip: dsi: move all lane config except
LCDC mux to bind()"), we moved most HW configuration to bind(), but we
didn't move the runtime PM management. Therefore, depending on initial
boot state, runtime-PM workqueue delays, and other timing factors, we
may disable our power domain in between the hardware configuration
(bind()) and when we enable the display. This can cause us to lose
hardware state and fail to configure our display. For example:
dw-mipi-dsi-rockchip ff968000.mipi: failed to write command FIFO
panel-innolux-p079zca ff960000.mipi.0: failed to write command 0
or:
dw-mipi-dsi-rockchip ff968000.mipi: failed to write command FIFO
panel-kingdisplay-kd097d04 ff960000.mipi.0: failed write init cmds: -110
We should match the runtime PM to the lifetime of the bind()/unbind()
cycle.
Tested on Acer Chrometab 10 (RK3399 Gru-Scarlet), with panel drivers
built either as modules or built-in.
Side notes: it seems one is more likely to see this problem when the
panel driver is built into the kernel. I've also seen this problem
bisect down to commits that simply changed Kconfig dependencies, because
it changed the order in which driver init functions were compiled into
the kernel, and therefore the ordering and timing of built-in device
probe.
Fixes: 43c2de1002d2 ("drm/rockchip: dsi: move all lane config except LCDC mux to bind()")
Link: https://lore.kernel.org/linux-rockchip/[email protected]/
Reported-by: <[email protected]>
Cc: <[email protected]>
Signed-off-by: Brian Norris <[email protected]>
Tested-by: Nícolas F. R. A. Prado <[email protected]>
Reviewed-by: Chen-Yu Tsai <[email protected]>
Signed-off-by: Heiko Stuebner <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20210928143413.v3.1.Ic2904d37f30013a7f3d8476203ad3733c186827e@changeid
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c | 37 ++++++++++++------------
1 file changed, 19 insertions(+), 18 deletions(-)
--- a/drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c
+++ b/drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c
@@ -753,10 +753,6 @@ static void dw_mipi_dsi_encoder_enable(s
if (mux < 0)
return;
- pm_runtime_get_sync(dsi->dev);
- if (dsi->slave)
- pm_runtime_get_sync(dsi->slave->dev);
-
/*
* For the RK3399, the clk of grf must be enabled before writing grf
* register. And for RK3288 or other soc, this grf_clk must be NULL,
@@ -775,20 +771,10 @@ static void dw_mipi_dsi_encoder_enable(s
clk_disable_unprepare(dsi->grf_clk);
}
-static void dw_mipi_dsi_encoder_disable(struct drm_encoder *encoder)
-{
- struct dw_mipi_dsi_rockchip *dsi = to_dsi(encoder);
-
- if (dsi->slave)
- pm_runtime_put(dsi->slave->dev);
- pm_runtime_put(dsi->dev);
-}
-
static const struct drm_encoder_helper_funcs
dw_mipi_dsi_encoder_helper_funcs = {
.atomic_check = dw_mipi_dsi_encoder_atomic_check,
.enable = dw_mipi_dsi_encoder_enable,
- .disable = dw_mipi_dsi_encoder_disable,
};
static int rockchip_dsi_drm_create_encoder(struct dw_mipi_dsi_rockchip *dsi,
@@ -918,10 +904,14 @@ static int dw_mipi_dsi_rockchip_bind(str
put_device(second);
}
+ pm_runtime_get_sync(dsi->dev);
+ if (dsi->slave)
+ pm_runtime_get_sync(dsi->slave->dev);
+
ret = clk_prepare_enable(dsi->pllref_clk);
if (ret) {
DRM_DEV_ERROR(dev, "Failed to enable pllref_clk: %d\n", ret);
- return ret;
+ goto out_pm_runtime;
}
/*
@@ -933,7 +923,7 @@ static int dw_mipi_dsi_rockchip_bind(str
ret = clk_prepare_enable(dsi->grf_clk);
if (ret) {
DRM_DEV_ERROR(dsi->dev, "Failed to enable grf_clk: %d\n", ret);
- return ret;
+ goto out_pm_runtime;
}
dw_mipi_dsi_rockchip_config(dsi);
@@ -945,16 +935,23 @@ static int dw_mipi_dsi_rockchip_bind(str
ret = rockchip_dsi_drm_create_encoder(dsi, drm_dev);
if (ret) {
DRM_DEV_ERROR(dev, "Failed to create drm encoder\n");
- return ret;
+ goto out_pm_runtime;
}
ret = dw_mipi_dsi_bind(dsi->dmd, &dsi->encoder);
if (ret) {
DRM_DEV_ERROR(dev, "Failed to bind: %d\n", ret);
- return ret;
+ goto out_pm_runtime;
}
return 0;
+
+out_pm_runtime:
+ pm_runtime_put(dsi->dev);
+ if (dsi->slave)
+ pm_runtime_put(dsi->slave->dev);
+
+ return ret;
}
static void dw_mipi_dsi_rockchip_unbind(struct device *dev,
@@ -969,6 +966,10 @@ static void dw_mipi_dsi_rockchip_unbind(
dw_mipi_dsi_unbind(dsi->dmd);
clk_disable_unprepare(dsi->pllref_clk);
+
+ pm_runtime_put(dsi->dev);
+ if (dsi->slave)
+ pm_runtime_put(dsi->slave->dev);
}
static const struct component_ops dw_mipi_dsi_rockchip_ops = {
From: Tsuchiya Yuto <[email protected]>
[ Upstream commit d21ce8c2f7bf6d737b60c09f86db141b9e8e47f0 ]
The function ia_css_mipi_is_source_port_valid() returns true if the port
is valid. So, we can't use the existing err variable as is.
To fix this issue while reusing that variable, invert the return value
when assigning it to the variable.
Fixes: 3c0538fbad9f ("media: atomisp: get rid of most checks for ISP2401 version")
Signed-off-by: Tsuchiya Yuto <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../staging/media/atomisp/pci/sh_css_mipi.c | 24 ++++++++++++-------
1 file changed, 15 insertions(+), 9 deletions(-)
diff --git a/drivers/staging/media/atomisp/pci/sh_css_mipi.c b/drivers/staging/media/atomisp/pci/sh_css_mipi.c
index 34b71c1b7c1ec..651eda0469b23 100644
--- a/drivers/staging/media/atomisp/pci/sh_css_mipi.c
+++ b/drivers/staging/media/atomisp/pci/sh_css_mipi.c
@@ -439,10 +439,12 @@ allocate_mipi_frames(struct ia_css_pipe *pipe,
return 0; /* AM TODO: Check */
}
- if (!IS_ISP2401)
+ if (!IS_ISP2401) {
port = (unsigned int)pipe->stream->config.source.port.port;
- else
- err = ia_css_mipi_is_source_port_valid(pipe, &port);
+ } else {
+ /* Returns true if port is valid. So, invert it */
+ err = !ia_css_mipi_is_source_port_valid(pipe, &port);
+ }
assert(port < N_CSI_PORTS);
@@ -572,10 +574,12 @@ free_mipi_frames(struct ia_css_pipe *pipe) {
return err;
}
- if (!IS_ISP2401)
+ if (!IS_ISP2401) {
port = (unsigned int)pipe->stream->config.source.port.port;
- else
- err = ia_css_mipi_is_source_port_valid(pipe, &port);
+ } else {
+ /* Returns true if port is valid. So, invert it */
+ err = !ia_css_mipi_is_source_port_valid(pipe, &port);
+ }
assert(port < N_CSI_PORTS);
@@ -685,10 +689,12 @@ send_mipi_frames(struct ia_css_pipe *pipe) {
/* TODO: AM: maybe this should be returning an error. */
}
- if (!IS_ISP2401)
+ if (!IS_ISP2401) {
port = (unsigned int)pipe->stream->config.source.port.port;
- else
- err = ia_css_mipi_is_source_port_valid(pipe, &port);
+ } else {
+ /* Returns true if port is valid. So, invert it */
+ err = !ia_css_mipi_is_source_port_valid(pipe, &port);
+ }
assert(port < N_CSI_PORTS);
--
2.34.1
From: Alexander Stein <[email protected]>
[ Upstream commit 95d35256b564aca33fb661eac77dc94bfcffc8df ]
Fix the schema warning: "spi-flash@0: $nodename:0: 'spi-flash@0' does
not match '^flash(@.*)?$'" from jedec,spi-nor.yaml
Fixes: a084eaf3096c ("arm64: dts: meson-g12b-odroid-n2: add SPIFC controller node")
Reviewed-by: Neil Armstrong <[email protected]>
Signed-off-by: Alexander Stein <[email protected]>
Signed-off-by: Neil Armstrong <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
index 59b5f39088757..b9b8cd4b5ba9d 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
@@ -543,7 +543,7 @@
pinctrl-0 = <&nor_pins>;
pinctrl-names = "default";
- mx25u64: spi-flash@0 {
+ mx25u64: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "mxicy,mx25u6435f", "jedec,spi-nor";
--
2.34.1
From: Marco Chiappero <[email protected]>
[ Upstream commit 6e680f94bc31d0fd0ff01123c964d895ea8040fa ]
The functions adf_iov_putmsg() and __adf_iov_putmsg() are shared by both
PF and VF. Any logging or documentation should not refer to any specific
direction.
Make comments and log messages direction agnostic by replacing PF2VF
with PFVF. Also fix the wording for some related comments.
Signed-off-by: Marco Chiappero <[email protected]>
Co-developed-by: Giovanni Cabiddu <[email protected]>
Signed-off-by: Giovanni Cabiddu <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/crypto/qat/qat_common/adf_pf2vf_msg.c | 15 ++++++++-------
1 file changed, 8 insertions(+), 7 deletions(-)
diff --git a/drivers/crypto/qat/qat_common/adf_pf2vf_msg.c b/drivers/crypto/qat/qat_common/adf_pf2vf_msg.c
index d1dbf6216de57..7b34273d18937 100644
--- a/drivers/crypto/qat/qat_common/adf_pf2vf_msg.c
+++ b/drivers/crypto/qat/qat_common/adf_pf2vf_msg.c
@@ -111,11 +111,11 @@ static int __adf_iov_putmsg(struct adf_accel_dev *accel_dev, u32 msg, u8 vf_nr)
mutex_lock(lock);
- /* Check if PF2VF CSR is in use by remote function */
+ /* Check if the PFVF CSR is in use by remote function */
val = ADF_CSR_RD(pmisc_bar_addr, pf2vf_offset);
if ((val & remote_in_use_mask) == remote_in_use_pattern) {
dev_dbg(&GET_DEV(accel_dev),
- "PF2VF CSR in use by remote function\n");
+ "PFVF CSR in use by remote function\n");
ret = -EBUSY;
goto out;
}
@@ -123,7 +123,7 @@ static int __adf_iov_putmsg(struct adf_accel_dev *accel_dev, u32 msg, u8 vf_nr)
msg &= ~local_in_use_mask;
msg |= local_in_use_pattern;
- /* Attempt to get ownership of the PF2VF CSR */
+ /* Attempt to get ownership of the PFVF CSR */
ADF_CSR_WR(pmisc_bar_addr, pf2vf_offset, msg | int_bit);
/* Wait for confirmation from remote func it received the message */
@@ -145,7 +145,7 @@ static int __adf_iov_putmsg(struct adf_accel_dev *accel_dev, u32 msg, u8 vf_nr)
ret = -EIO;
}
- /* Finished with PF2VF CSR; relinquish it and leave msg in CSR */
+ /* Finished with the PFVF CSR; relinquish it and leave msg in CSR */
ADF_CSR_WR(pmisc_bar_addr, pf2vf_offset, val & ~local_in_use_mask);
out:
mutex_unlock(lock);
@@ -153,12 +153,13 @@ out:
}
/**
- * adf_iov_putmsg() - send PF2VF message
+ * adf_iov_putmsg() - send PFVF message
* @accel_dev: Pointer to acceleration device.
* @msg: Message to send
- * @vf_nr: VF number to which the message will be sent
+ * @vf_nr: VF number to which the message will be sent if on PF, ignored
+ * otherwise
*
- * Function sends a message from the PF to a VF
+ * Function sends a message through the PFVF channel
*
* Return: 0 on success, error code otherwise.
*/
--
2.34.1
From: Dmitry Baryshkov <[email protected]>
[ Upstream commit b0293c19d42f6d6951c2fab9a47fed50baf2c14d ]
Change sdhcN aliases to mmcN to make them actually work. Currently the
board uses non-standard aliases sdhcN, which do not work, resulting in
mmc0 and mmc1 hosts randomly changing indices between boots.
Fixes: c4da5a561627 ("arm64: dts: qcom: Add msm8916 sdhci configuration nodes")
Signed-off-by: Dmitry Baryshkov <[email protected]>
Signed-off-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/qcom/msm8916.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index b1ffc056eea0b..291276a38d7cd 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -18,8 +18,8 @@
#size-cells = <2>;
aliases {
- sdhc1 = &sdhc_1; /* SDC1 eMMC slot */
- sdhc2 = &sdhc_2; /* SDC2 SD card slot */
+ mmc0 = &sdhc_1; /* SDC1 eMMC slot */
+ mmc1 = &sdhc_2; /* SDC2 SD card slot */
};
chosen { };
--
2.34.1
From: Marco Chiappero <[email protected]>
[ Upstream commit e17f49bb244a281fe39bfdad0306a38b3a02e7bf ]
The initial version of the PFVF protocol included an initial "carrier
sensing" to get ownership of the channel.
Collisions can happen anyway, the extra wait and test does not prevent
collisions, it instead slows the communication down, so remove it.
Signed-off-by: Marco Chiappero <[email protected]>
Reviewed-by: Giovanni Cabiddu <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/crypto/qat/qat_common/adf_pf2vf_msg.c | 20 +------------------
1 file changed, 1 insertion(+), 19 deletions(-)
diff --git a/drivers/crypto/qat/qat_common/adf_pf2vf_msg.c b/drivers/crypto/qat/qat_common/adf_pf2vf_msg.c
index e3da97286980e..d1dbf6216de57 100644
--- a/drivers/crypto/qat/qat_common/adf_pf2vf_msg.c
+++ b/drivers/crypto/qat/qat_common/adf_pf2vf_msg.c
@@ -120,28 +120,10 @@ static int __adf_iov_putmsg(struct adf_accel_dev *accel_dev, u32 msg, u8 vf_nr)
goto out;
}
- /* Attempt to get ownership of PF2VF CSR */
msg &= ~local_in_use_mask;
msg |= local_in_use_pattern;
- ADF_CSR_WR(pmisc_bar_addr, pf2vf_offset, msg);
- /* Wait in case remote func also attempting to get ownership */
- msleep(ADF_IOV_MSG_COLLISION_DETECT_DELAY);
-
- val = ADF_CSR_RD(pmisc_bar_addr, pf2vf_offset);
- if ((val & local_in_use_mask) != local_in_use_pattern) {
- dev_dbg(&GET_DEV(accel_dev),
- "PF2VF CSR in use by remote - collision detected\n");
- ret = -EBUSY;
- goto out;
- }
-
- /*
- * This function now owns the PV2VF CSR. The IN_USE_BY pattern must
- * remain in the PF2VF CSR for all writes including ACK from remote
- * until this local function relinquishes the CSR. Send the message
- * by interrupting the remote.
- */
+ /* Attempt to get ownership of the PF2VF CSR */
ADF_CSR_WR(pmisc_bar_addr, pf2vf_offset, msg | int_bit);
/* Wait for confirmation from remote func it received the message */
--
2.34.1
From: George G. Davis <[email protected]>
[ Upstream commit baaf965f94308301d2dc554d72a87d7432cd5ce6 ]
The following KASAN BUG is observed when testing the rpc-if driver on
rcar-gen3:
root@rcar-gen3:~# modprobe -r rpc-if
[ 101.930146] ==================================================================
[ 101.937408] BUG: KASAN: slab-out-of-bounds in __lock_acquire+0x518/0x25d0
[ 101.944240] Read of size 8 at addr ffff0004c5be2750 by task modprobe/664
[ 101.950959]
[ 101.952466] CPU: 2 PID: 664 Comm: modprobe Not tainted 5.14.0-rc1-00342-g1a1464d7aa31 #1
[ 101.960578] Hardware name: Renesas H3ULCB board based on r8a77951 (DT)
[ 101.967120] Call trace:
[ 101.969580] dump_backtrace+0x0/0x2c0
[ 101.973275] show_stack+0x1c/0x30
[ 101.976616] dump_stack_lvl+0x9c/0xd8
[ 101.980301] print_address_description.constprop.0+0x74/0x2b8
[ 101.986071] kasan_report+0x1f4/0x26c
[ 101.989757] __asan_load8+0x98/0xd4
[ 101.993266] __lock_acquire+0x518/0x25d0
[ 101.997215] lock_acquire.part.0+0x18c/0x360
[ 102.001506] lock_acquire+0x74/0x90
[ 102.005013] _raw_spin_lock_irq+0x98/0x130
[ 102.009131] __pm_runtime_disable+0x30/0x210
[ 102.013427] rpcif_hb_remove+0x5c/0x70 [rpc_if]
[ 102.018001] platform_remove+0x40/0x80
[ 102.021771] __device_release_driver+0x234/0x350
[ 102.026412] driver_detach+0x158/0x20c
[ 102.030179] bus_remove_driver+0xa0/0x140
[ 102.034212] driver_unregister+0x48/0x80
[ 102.038153] platform_driver_unregister+0x18/0x24
[ 102.042879] rpcif_platform_driver_exit+0x1c/0x34 [rpc_if]
[ 102.048400] __arm64_sys_delete_module+0x210/0x310
[ 102.053212] invoke_syscall+0x60/0x190
[ 102.056986] el0_svc_common+0x12c/0x144
[ 102.060844] do_el0_svc+0x88/0xac
[ 102.064181] el0_svc+0x24/0x3c
[ 102.067257] el0t_64_sync_handler+0x1a8/0x1b0
[ 102.071634] el0t_64_sync+0x198/0x19c
[ 102.075315]
[ 102.076815] Allocated by task 628:
[ 102.080781]
[ 102.082280] Last potentially related work creation:
[ 102.087524]
[ 102.089022] The buggy address belongs to the object at ffff0004c5be2000
[ 102.089022] which belongs to the cache kmalloc-2k of size 2048
[ 102.101555] The buggy address is located 1872 bytes inside of
[ 102.101555] 2048-byte region [ffff0004c5be2000, ffff0004c5be2800)
[ 102.113486] The buggy address belongs to the page:
[ 102.118409]
[ 102.119908] Memory state around the buggy address:
[ 102.124711] ffff0004c5be2600: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 102.131947] ffff0004c5be2680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 102.139181] >ffff0004c5be2700: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 102.146412] ^
[ 102.152257] ffff0004c5be2780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 102.159491] ffff0004c5be2800: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 102.166723] ==================================================================
The above bug is caused by use of the wrong pointer in the
rpcif_disable_rpm() call. Fix the bug by using the correct pointer.
Fixes: 5de15b610f78 ("mtd: hyperbus: add Renesas RPC-IF driver")
Signed-off-by: George G. Davis <[email protected]>
Signed-off-by: Vignesh Raghavendra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mtd/hyperbus/rpc-if.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/mtd/hyperbus/rpc-if.c b/drivers/mtd/hyperbus/rpc-if.c
index 367b0d72bf622..dc164c18f8429 100644
--- a/drivers/mtd/hyperbus/rpc-if.c
+++ b/drivers/mtd/hyperbus/rpc-if.c
@@ -152,9 +152,9 @@ static int rpcif_hb_remove(struct platform_device *pdev)
{
struct rpcif_hyperbus *hyperbus = platform_get_drvdata(pdev);
int error = hyperbus_unregister_device(&hyperbus->hbdev);
- struct rpcif *rpc = dev_get_drvdata(pdev->dev.parent);
- rpcif_disable_rpm(rpc);
+ rpcif_disable_rpm(&hyperbus->rpc);
+
return error;
}
--
2.34.1
From: Bhaskar Chowdhury <[email protected]>
[ Upstream commit f17a25cb1776c5712e950aaf326528ae652a086c ]
Trivial fix to spelling mistake in adf_pf2vf_msg.c and adf_vf2pf_msg.c.
s/messge/message/
Signed-off-by: Bhaskar Chowdhury <[email protected]>
Signed-off-by: Giovanni Cabiddu <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/crypto/qat/qat_common/adf_pf2vf_msg.c | 2 +-
drivers/crypto/qat/qat_common/adf_vf2pf_msg.c | 4 ++--
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/crypto/qat/qat_common/adf_pf2vf_msg.c b/drivers/crypto/qat/qat_common/adf_pf2vf_msg.c
index d7ca222f0df18..e3da97286980e 100644
--- a/drivers/crypto/qat/qat_common/adf_pf2vf_msg.c
+++ b/drivers/crypto/qat/qat_common/adf_pf2vf_msg.c
@@ -176,7 +176,7 @@ out:
* @msg: Message to send
* @vf_nr: VF number to which the message will be sent
*
- * Function sends a messge from the PF to a VF
+ * Function sends a message from the PF to a VF
*
* Return: 0 on success, error code otherwise.
*/
diff --git a/drivers/crypto/qat/qat_common/adf_vf2pf_msg.c b/drivers/crypto/qat/qat_common/adf_vf2pf_msg.c
index 54b738da829d8..3e25fac051b25 100644
--- a/drivers/crypto/qat/qat_common/adf_vf2pf_msg.c
+++ b/drivers/crypto/qat/qat_common/adf_vf2pf_msg.c
@@ -8,7 +8,7 @@
* adf_vf2pf_notify_init() - send init msg to PF
* @accel_dev: Pointer to acceleration VF device.
*
- * Function sends an init messge from the VF to a PF
+ * Function sends an init message from the VF to a PF
*
* Return: 0 on success, error code otherwise.
*/
@@ -31,7 +31,7 @@ EXPORT_SYMBOL_GPL(adf_vf2pf_notify_init);
* adf_vf2pf_notify_shutdown() - send shutdown msg to PF
* @accel_dev: Pointer to acceleration VF device.
*
- * Function sends a shutdown messge from the VF to a PF
+ * Function sends a shutdown message from the VF to a PF
*
* Return: void
*/
--
2.34.1
From: Jammy Huang <[email protected]>
[ Upstream commit 62cea52ad4bead0ae4be2cfe1142eb0aae0e9fbd ]
aspeed_video_get_resolution() will try to do res-detect again if the
timing got in last try is invalid. But it will always time out because
VE_SEQ_CTRL_TRIG_MODE_DET is only cleared after 1st mode-detect.
To fix the problem, just clear VE_SEQ_CTRL_TRIG_MODE_DET before setting
it in aspeed_video_enable_mode_detect().
Fixes: d2b4387f3bdf ("media: platform: Add Aspeed Video Engine driver")
Signed-off-by: Jammy Huang <[email protected]>
Acked-by: Paul Menzel <[email protected]>
Reviewed-by: Joel Stanley <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/platform/aspeed-video.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/media/platform/aspeed-video.c b/drivers/media/platform/aspeed-video.c
index 7bb6babdcade0..23c41c545c536 100644
--- a/drivers/media/platform/aspeed-video.c
+++ b/drivers/media/platform/aspeed-video.c
@@ -500,6 +500,10 @@ static void aspeed_video_enable_mode_detect(struct aspeed_video *video)
aspeed_video_update(video, VE_INTERRUPT_CTRL, 0,
VE_INTERRUPT_MODE_DETECT);
+ /* Disable mode detect in order to re-trigger */
+ aspeed_video_update(video, VE_SEQ_CTRL,
+ VE_SEQ_CTRL_TRIG_MODE_DET, 0);
+
/* Trigger mode detect */
aspeed_video_update(video, VE_SEQ_CTRL, 0, VE_SEQ_CTRL_TRIG_MODE_DET);
}
@@ -786,10 +790,6 @@ static void aspeed_video_get_resolution(struct aspeed_video *video)
return;
}
- /* Disable mode detect in order to re-trigger */
- aspeed_video_update(video, VE_SEQ_CTRL,
- VE_SEQ_CTRL_TRIG_MODE_DET, 0);
-
aspeed_video_check_and_set_polarity(video);
aspeed_video_enable_mode_detect(video);
--
2.34.1
From: Vincent Donnefort <[email protected]>
[ Upstream commit 014ba44e8184e1acf93e0cbb7089ee847802f8f0 ]
select_idle_sibling() has a special case for tasks woken up by a per-CPU
kthread where the selected CPU is the previous one. For asymmetric CPU
capacity systems, the assumption was that the wakee couldn't have a
bigger utilization during task placement than it used to have during the
last activation. That was not considering uclamp.min which can completely
change between two task activations and as a consequence mandates the
fitness criterion asym_fits_capacity(), even for the exit path described
above.
Fixes: b4c9c9f15649 ("sched/fair: Prefer prev cpu in asymmetric wakeup path")
Signed-off-by: Vincent Donnefort <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Valentin Schneider <[email protected]>
Reviewed-by: Dietmar Eggemann <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/sched/fair.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c
index a7589552be5fc..2a33cb5a10e59 100644
--- a/kernel/sched/fair.c
+++ b/kernel/sched/fair.c
@@ -6286,7 +6286,8 @@ static int select_idle_sibling(struct task_struct *p, int prev, int target)
if (is_per_cpu_kthread(current) &&
in_task() &&
prev == smp_processor_id() &&
- this_rq()->nr_running <= 1) {
+ this_rq()->nr_running <= 1 &&
+ asym_fits_capacity(task_util, prev)) {
return prev;
}
--
2.34.1
From: Claudiu Beznea <[email protected]>
[ Upstream commit 5d051cf94fd5834a1513aa77e542c49fd973988a ]
Flexcom IP embeds 3 other IPs: usart, i2c, spi and selects the operation
mode (usart, i2c, spi) via mode register (FLEX_MR). On i2c bus there might
be connected critical devices (like PMIC) which on suspend/resume should
be suspended/resumed at the end/beginning. i2c uses
.suspend_noirq/.resume_noirq for this kind of purposes. Align flexcom
to use .resume_noirq as it should be resumed before the embedded IPs.
Otherwise the embedded devices might behave badly.
Fixes: 7fdec11015c3 ("atmel_flexcom: Support resuming after a chip reset")
Signed-off-by: Claudiu Beznea <[email protected]>
Tested-by: Codrin Ciubotariu <[email protected]>
Acked-by: Nicolas Ferre <[email protected]>
Signed-off-by: Lee Jones <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mfd/atmel-flexcom.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/mfd/atmel-flexcom.c b/drivers/mfd/atmel-flexcom.c
index 962f66dc8813e..559eb4d352b68 100644
--- a/drivers/mfd/atmel-flexcom.c
+++ b/drivers/mfd/atmel-flexcom.c
@@ -87,7 +87,7 @@ static const struct of_device_id atmel_flexcom_of_match[] = {
};
MODULE_DEVICE_TABLE(of, atmel_flexcom_of_match);
-static int __maybe_unused atmel_flexcom_resume(struct device *dev)
+static int __maybe_unused atmel_flexcom_resume_noirq(struct device *dev)
{
struct atmel_flexcom *ddata = dev_get_drvdata(dev);
int err;
@@ -105,8 +105,9 @@ static int __maybe_unused atmel_flexcom_resume(struct device *dev)
return 0;
}
-static SIMPLE_DEV_PM_OPS(atmel_flexcom_pm_ops, NULL,
- atmel_flexcom_resume);
+static const struct dev_pm_ops atmel_flexcom_pm_ops = {
+ .resume_noirq = atmel_flexcom_resume_noirq,
+};
static struct platform_driver atmel_flexcom_driver = {
.probe = atmel_flexcom_probe,
--
2.34.1
From: Christophe JAILLET <[email protected]>
[ Upstream commit 8cc7a1b2aca067397a016cdb971a5e6ad9b640c7 ]
A successful 'of_platform_populate()' call should be balanced by a
corresponding 'of_platform_depopulate()' call in the error handling path
of the probe, as already done in the remove function.
A successful 'venus_firmware_init()' call should be balanced by a
corresponding 'venus_firmware_deinit()' call in the error handling path
of the probe, as already done in the remove function.
Update the error handling path accordingly.
Fixes: f9799fcce4bb ("media: venus: firmware: register separate platform_device for firmware loader")
Signed-off-by: Christophe JAILLET <[email protected]>
Signed-off-by: Stanimir Varbanov <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/platform/qcom/venus/core.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/media/platform/qcom/venus/core.c b/drivers/media/platform/qcom/venus/core.c
index 791ed1b1bbbd3..1d621f7769035 100644
--- a/drivers/media/platform/qcom/venus/core.c
+++ b/drivers/media/platform/qcom/venus/core.c
@@ -294,11 +294,11 @@ static int venus_probe(struct platform_device *pdev)
ret = venus_firmware_init(core);
if (ret)
- goto err_runtime_disable;
+ goto err_of_depopulate;
ret = venus_boot(core);
if (ret)
- goto err_runtime_disable;
+ goto err_firmware_deinit;
ret = hfi_core_resume(core, true);
if (ret)
@@ -330,6 +330,10 @@ err_dev_unregister:
v4l2_device_unregister(&core->v4l2_dev);
err_venus_shutdown:
venus_shutdown(core);
+err_firmware_deinit:
+ venus_firmware_deinit(core);
+err_of_depopulate:
+ of_platform_depopulate(dev);
err_runtime_disable:
pm_runtime_put_noidle(dev);
pm_runtime_set_suspended(dev);
--
2.34.1
From: Tudor Ambarus <[email protected]>
[ Upstream commit 1e67bd2b8cb90b66e89562598e9c2046246832d3 ]
The tx_submit() method of struct dma_async_tx_descriptor is entitled
to do sanity checks and return errors if encountered. It's not the
case for the DMA controller drivers that this client is using
(at_h/xdmac), because they currently don't do sanity checks and always
return a positive cookie at tx_submit() method. In case the controller
drivers will implement sanity checks and return errors, print a message
so that the client will be informed that something went wrong at
tx_submit() level.
Fixes: 08f738be88bb ("serial: at91: add tx dma support")
Signed-off-by: Tudor Ambarus <[email protected]>
Acked-by: Richard Genoud <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/tty/serial/atmel_serial.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index a24e5c2b30bc9..396fe8c51f93b 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -1004,6 +1004,11 @@ static void atmel_tx_dma(struct uart_port *port)
desc->callback = atmel_complete_tx_dma;
desc->callback_param = atmel_port;
atmel_port->cookie_tx = dmaengine_submit(desc);
+ if (dma_submit_error(atmel_port->cookie_tx)) {
+ dev_err(port->dev, "dma_submit_error %d\n",
+ atmel_port->cookie_tx);
+ return;
+ }
}
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
@@ -1264,6 +1269,11 @@ static int atmel_prepare_rx_dma(struct uart_port *port)
desc->callback_param = port;
atmel_port->desc_rx = desc;
atmel_port->cookie_rx = dmaengine_submit(desc);
+ if (dma_submit_error(atmel_port->cookie_rx)) {
+ dev_err(port->dev, "dma_submit_error %d\n",
+ atmel_port->cookie_rx);
+ goto chan_err;
+ }
return 0;
--
2.34.1
From: Zhou Qingyang <[email protected]>
[ Upstream commit 8dbdcc7269a83305ee9d677b75064d3530a48ee2 ]
In dib8000_init(), the variable fe is not freed or passed out on the
failure of dib8000_identify(&state->i2c), which could lead to a memleak.
Fix this bug by adding a kfree of fe in the error path.
This bug was found by a static analyzer. The analysis employs
differential checking to identify inconsistent security operations
(e.g., checks or kfrees) between two code paths and confirms that the
inconsistent operations are not recovered in the current function or
the callers, so they constitute bugs.
Note that, as a bug found by static analysis, it can be a false
positive or hard to trigger. Multiple researchers have cross-reviewed
the bug.
Builds with CONFIG_DVB_DIB8000=m show no new warnings,
and our static analyzer no longer warns about this code.
Fixes: 77e2c0f5d471 ("V4L/DVB (12900): DiB8000: added support for DiBcom ISDB-T/ISDB-Tsb demodulator DiB8000")
Signed-off-by: Zhou Qingyang <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/dvb-frontends/dib8000.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/media/dvb-frontends/dib8000.c b/drivers/media/dvb-frontends/dib8000.c
index bb02354a48b81..d67f2dd997d06 100644
--- a/drivers/media/dvb-frontends/dib8000.c
+++ b/drivers/media/dvb-frontends/dib8000.c
@@ -4473,8 +4473,10 @@ static struct dvb_frontend *dib8000_init(struct i2c_adapter *i2c_adap, u8 i2c_ad
state->timf_default = cfg->pll->timf;
- if (dib8000_identify(&state->i2c) == 0)
+ if (dib8000_identify(&state->i2c) == 0) {
+ kfree(fe);
goto error;
+ }
dibx000_init_i2c_master(&state->i2c_master, DIB8000, state->i2c.adap, state->i2c.addr);
--
2.34.1
From: Christophe JAILLET <[email protected]>
[ Upstream commit e4debea9be7d5db52bc6a565a4c02c3c6560d093 ]
The normal path of the function makes the assumption that
'pm_ops->core_power' may be NULL.
We should make the same assumption in the error handling path or a NULL
pointer dereference may occur.
Add the missing test before calling 'pm_ops->core_power'
Fixes: 9e8efdb57879 ("media: venus: core: vote for video-mem path")
Signed-off-by: Christophe JAILLET <[email protected]>
Signed-off-by: Stanimir Varbanov <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/platform/qcom/venus/core.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/media/platform/qcom/venus/core.c b/drivers/media/platform/qcom/venus/core.c
index bad553bf9f304..791ed1b1bbbd3 100644
--- a/drivers/media/platform/qcom/venus/core.c
+++ b/drivers/media/platform/qcom/venus/core.c
@@ -409,7 +409,8 @@ static __maybe_unused int venus_runtime_suspend(struct device *dev)
err_video_path:
icc_set_bw(core->cpucfg_path, kbps_to_icc(1000), 0);
err_cpucfg_path:
- pm_ops->core_power(core, POWER_ON);
+ if (pm_ops->core_power)
+ pm_ops->core_power(core, POWER_ON);
return ret;
}
--
2.34.1
From: Christian Lamparter <[email protected]>
[ Upstream commit 4754eab7e5a78bdefe7a960c5c260c95ebbb5fa6 ]
Steven Maddox reported in the OpenWrt bugzilla, that his
RaidSonic IB-NAS4220-B was no longer booting with the new
OpenWrt 21.02 (uses linux 5.10's device-tree). However, it was
working with the previous OpenWrt 19.07 series (uses 4.14).
|[ 5.548038] No RedBoot partition table detected in 30000000.flash
|[ 5.618553] Searching for RedBoot partition table in 30000000.flash at offset 0x0
|[ 5.739093] No RedBoot partition table detected in 30000000.flash
|...
|[ 7.039504] Waiting for root device /dev/mtdblock3...
The provided bootlog shows that the RedBoot partition parser was
looking for the partition table "at offset 0x0". Which is strange
since the comment in the device-tree says it should be at 0xfe0000.
Further digging on the internet led to a review site that took
some useful PCB pictures of their review unit back in February 2009.
Their picture shows a Spansion S29GL128N11TFI01 flash chip.
>From Spansion's Datasheet:
"S29GL128N: One hundred twenty-eight 64 Kword (128 Kbyte) sectors"
Steven also provided a "cat /sys/class/mtd/mtd0/erasesize" from his
unit: "131072".
With the 128 KiB Sector/Erasesize in mind. This patch changes the
fis-index-block property to (0xfe0000 / 0x20000) = 0x7f.
Fixes: b5a923f8c739 ("ARM: dts: gemini: Switch to redboot partition parsing")
Reported-by: Steven Maddox <[email protected]>
Signed-off-by: Christian Lamparter <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
Tested-by: Steven Maddox <[email protected]>
Link: https://lore.kernel.org/r/[email protected]'
Bugzilla: https://bugs.openwrt.org/index.php?do=details&task_id=4137
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/gemini-nas4220b.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/gemini-nas4220b.dts b/arch/arm/boot/dts/gemini-nas4220b.dts
index 13112a8a5dd88..6544c730340fa 100644
--- a/arch/arm/boot/dts/gemini-nas4220b.dts
+++ b/arch/arm/boot/dts/gemini-nas4220b.dts
@@ -84,7 +84,7 @@
partitions {
compatible = "redboot-fis";
/* Eraseblock at 0xfe0000 */
- fis-index-block = <0x1fc>;
+ fis-index-block = <0x7f>;
};
};
--
2.34.1
From: Christian Hewitt <[email protected]>
[ Upstream commit c019abb2feba3cbbd7cf7178f8e6499c4fa6fced ]
The absence of this binding appears to be harmless in Linux but it breaks
Ethernet support in mainline u-boot. So add the binding (which is present
in all other u-boot supported GXBB device-trees).
Fixes: fb72c03e0e32 ("ARM64: dts: meson-gxbb-wetek: add a wetek specific dtsi to cleanup hub and play2")
Signed-off-by: Christian Hewitt <[email protected]>
Reviewed-by: Neil Armstrong <[email protected]>
Signed-off-by: Neil Armstrong <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
index 8e2af986cebaf..a4d34398da358 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
@@ -6,6 +6,7 @@
*/
#include "meson-gxbb.dtsi"
+#include <dt-bindings/gpio/gpio.h>
/ {
aliases {
--
2.34.1
From: Zhou Qingyang <[email protected]>
[ Upstream commit ab50cb9df8896b39aae65c537a30de2c79c19735 ]
In radeon_driver_open_kms(), radeon_vm_bo_add() is assigned to
vm->ib_bo_va and passes and used in radeon_vm_bo_set_addr(). In
radeon_vm_bo_set_addr(), there is a dereference of vm->ib_bo_va,
which could lead to a NULL pointer dereference on failure of
radeon_vm_bo_add().
Fix this bug by adding a check of vm->ib_bo_va.
This bug was found by a static analyzer. The analysis employs
differential checking to identify inconsistent security operations
(e.g., checks or kfrees) between two code paths and confirms that the
inconsistent operations are not recovered in the current function or
the callers, so they constitute bugs.
Note that, as a bug found by static analysis, it can be a false
positive or hard to trigger. Multiple researchers have cross-reviewed
the bug.
Builds with CONFIG_DRM_RADEON=m show no new warnings,
and our static analyzer no longer warns about this code.
Fixes: cc9e67e3d700 ("drm/radeon: fix VM IB handling")
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Zhou Qingyang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/radeon/radeon_kms.c | 36 ++++++++++++++++-------------
1 file changed, 20 insertions(+), 16 deletions(-)
diff --git a/drivers/gpu/drm/radeon/radeon_kms.c b/drivers/gpu/drm/radeon/radeon_kms.c
index 8c0a572940e82..204634b239283 100644
--- a/drivers/gpu/drm/radeon/radeon_kms.c
+++ b/drivers/gpu/drm/radeon/radeon_kms.c
@@ -634,6 +634,8 @@ void radeon_driver_lastclose_kms(struct drm_device *dev)
int radeon_driver_open_kms(struct drm_device *dev, struct drm_file *file_priv)
{
struct radeon_device *rdev = dev->dev_private;
+ struct radeon_fpriv *fpriv;
+ struct radeon_vm *vm;
int r;
file_priv->driver_priv = NULL;
@@ -646,8 +648,6 @@ int radeon_driver_open_kms(struct drm_device *dev, struct drm_file *file_priv)
/* new gpu have virtual address space support */
if (rdev->family >= CHIP_CAYMAN) {
- struct radeon_fpriv *fpriv;
- struct radeon_vm *vm;
fpriv = kzalloc(sizeof(*fpriv), GFP_KERNEL);
if (unlikely(!fpriv)) {
@@ -658,35 +658,39 @@ int radeon_driver_open_kms(struct drm_device *dev, struct drm_file *file_priv)
if (rdev->accel_working) {
vm = &fpriv->vm;
r = radeon_vm_init(rdev, vm);
- if (r) {
- kfree(fpriv);
- goto out_suspend;
- }
+ if (r)
+ goto out_fpriv;
r = radeon_bo_reserve(rdev->ring_tmp_bo.bo, false);
- if (r) {
- radeon_vm_fini(rdev, vm);
- kfree(fpriv);
- goto out_suspend;
- }
+ if (r)
+ goto out_vm_fini;
/* map the ib pool buffer read only into
* virtual address space */
vm->ib_bo_va = radeon_vm_bo_add(rdev, vm,
rdev->ring_tmp_bo.bo);
+ if (!vm->ib_bo_va) {
+ r = -ENOMEM;
+ goto out_vm_fini;
+ }
+
r = radeon_vm_bo_set_addr(rdev, vm->ib_bo_va,
RADEON_VA_IB_OFFSET,
RADEON_VM_PAGE_READABLE |
RADEON_VM_PAGE_SNOOPED);
- if (r) {
- radeon_vm_fini(rdev, vm);
- kfree(fpriv);
- goto out_suspend;
- }
+ if (r)
+ goto out_vm_fini;
}
file_priv->driver_priv = fpriv;
}
+ if (!r)
+ goto out_suspend;
+
+out_vm_fini:
+ radeon_vm_fini(rdev, vm);
+out_fpriv:
+ kfree(fpriv);
out_suspend:
pm_runtime_mark_last_busy(dev->dev);
pm_runtime_put_autosuspend(dev->dev);
--
2.34.1
From: Kajol Jain <[email protected]>
[ Upstream commit db52f57211b4e45f0ebb274e2c877b211dc18591 ]
Branch data available to BPF programs can be very useful to get stack traces
out of userspace application.
Commit fff7b64355ea ("bpf: Add bpf_read_branch_records() helper") added BPF
support to capture branch records in x86. Enable this feature also for other
architectures as well by removing checks specific to x86.
If an architecture doesn't support branch records, bpf_read_branch_records()
still has appropriate checks and it will return an -EINVAL in that scenario.
Based on UAPI helper doc in include/uapi/linux/bpf.h, unsupported architectures
should return -ENOENT in such case. Hence, update the appropriate check to
return -ENOENT instead.
Selftest 'perf_branches' result on power9 machine which has the branch stacks
support:
- Before this patch:
[command]# ./test_progs -t perf_branches
#88/1 perf_branches/perf_branches_hw:FAIL
#88/2 perf_branches/perf_branches_no_hw:OK
#88 perf_branches:FAIL
Summary: 0/1 PASSED, 0 SKIPPED, 1 FAILED
- After this patch:
[command]# ./test_progs -t perf_branches
#88/1 perf_branches/perf_branches_hw:OK
#88/2 perf_branches/perf_branches_no_hw:OK
#88 perf_branches:OK
Summary: 1/2 PASSED, 0 SKIPPED, 0 FAILED
Selftest 'perf_branches' result on power9 machine which doesn't have branch
stack report:
- After this patch:
[command]# ./test_progs -t perf_branches
#88/1 perf_branches/perf_branches_hw:SKIP
#88/2 perf_branches/perf_branches_no_hw:OK
#88 perf_branches:OK
Summary: 1/1 PASSED, 1 SKIPPED, 0 FAILED
Fixes: fff7b64355eac ("bpf: Add bpf_read_branch_records() helper")
Suggested-by: Peter Zijlstra <[email protected]>
Signed-off-by: Kajol Jain <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/trace/bpf_trace.c | 6 +-----
1 file changed, 1 insertion(+), 5 deletions(-)
diff --git a/kernel/trace/bpf_trace.c b/kernel/trace/bpf_trace.c
index ba644760f5076..a9e074769881f 100644
--- a/kernel/trace/bpf_trace.c
+++ b/kernel/trace/bpf_trace.c
@@ -1517,9 +1517,6 @@ static const struct bpf_func_proto bpf_perf_prog_read_value_proto = {
BPF_CALL_4(bpf_read_branch_records, struct bpf_perf_event_data_kern *, ctx,
void *, buf, u32, size, u64, flags)
{
-#ifndef CONFIG_X86
- return -ENOENT;
-#else
static const u32 br_entry_size = sizeof(struct perf_branch_entry);
struct perf_branch_stack *br_stack = ctx->data->br_stack;
u32 to_copy;
@@ -1528,7 +1525,7 @@ BPF_CALL_4(bpf_read_branch_records, struct bpf_perf_event_data_kern *, ctx,
return -EINVAL;
if (unlikely(!br_stack))
- return -EINVAL;
+ return -ENOENT;
if (flags & BPF_F_GET_BRANCH_RECORDS_SIZE)
return br_stack->nr * br_entry_size;
@@ -1540,7 +1537,6 @@ BPF_CALL_4(bpf_read_branch_records, struct bpf_perf_event_data_kern *, ctx,
memcpy(buf, br_stack->entries, to_copy);
return to_copy;
-#endif
}
static const struct bpf_func_proto bpf_read_branch_records_proto = {
--
2.34.1
From: William Kucharski <[email protected]>
[ Upstream commit e14da77113bb890d7bf9e5d17031bdd476a7ce5e ]
Various trace event fields that store cgroup IDs were declared as
ints, but cgroup_id(() returns a u64 and the structures and associated
TP_printk() calls were not updated to reflect this.
Fixes: 743210386c03 ("cgroup: use cgrp->kn->id as the cgroup ID")
Signed-off-by: William Kucharski <[email protected]>
Reviewed-by: Steven Rostedt (VMware) <[email protected]>
Signed-off-by: Tejun Heo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/trace/events/cgroup.h | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/include/trace/events/cgroup.h b/include/trace/events/cgroup.h
index 7f42a3de59e6b..dd7d7c9efecdf 100644
--- a/include/trace/events/cgroup.h
+++ b/include/trace/events/cgroup.h
@@ -59,8 +59,8 @@ DECLARE_EVENT_CLASS(cgroup,
TP_STRUCT__entry(
__field( int, root )
- __field( int, id )
__field( int, level )
+ __field( u64, id )
__string( path, path )
),
@@ -71,7 +71,7 @@ DECLARE_EVENT_CLASS(cgroup,
__assign_str(path, path);
),
- TP_printk("root=%d id=%d level=%d path=%s",
+ TP_printk("root=%d id=%llu level=%d path=%s",
__entry->root, __entry->id, __entry->level, __get_str(path))
);
@@ -126,8 +126,8 @@ DECLARE_EVENT_CLASS(cgroup_migrate,
TP_STRUCT__entry(
__field( int, dst_root )
- __field( int, dst_id )
__field( int, dst_level )
+ __field( u64, dst_id )
__field( int, pid )
__string( dst_path, path )
__string( comm, task->comm )
@@ -142,7 +142,7 @@ DECLARE_EVENT_CLASS(cgroup_migrate,
__assign_str(comm, task->comm);
),
- TP_printk("dst_root=%d dst_id=%d dst_level=%d dst_path=%s pid=%d comm=%s",
+ TP_printk("dst_root=%d dst_id=%llu dst_level=%d dst_path=%s pid=%d comm=%s",
__entry->dst_root, __entry->dst_id, __entry->dst_level,
__get_str(dst_path), __entry->pid, __get_str(comm))
);
@@ -171,8 +171,8 @@ DECLARE_EVENT_CLASS(cgroup_event,
TP_STRUCT__entry(
__field( int, root )
- __field( int, id )
__field( int, level )
+ __field( u64, id )
__string( path, path )
__field( int, val )
),
@@ -185,7 +185,7 @@ DECLARE_EVENT_CLASS(cgroup_event,
__entry->val = val;
),
- TP_printk("root=%d id=%d level=%d path=%s val=%d",
+ TP_printk("root=%d id=%llu level=%d path=%s val=%d",
__entry->root, __entry->id, __entry->level, __get_str(path),
__entry->val)
);
--
2.34.1
From: Yang Yingliang <[email protected]>
[ Upstream commit ef054e345ed8c79ce1121a3599b5a2dfd78e57a0 ]
n the 'radio->hdl.error' error handling, ctrl handler allocated by
v4l2_ctrl_new_std() does not released, and caused memory leak as
follows:
unreferenced object 0xffff888033d54200 (size 256):
comm "i2c-si470x-19", pid 909, jiffies 4294914203 (age 8.072s)
hex dump (first 32 bytes):
e8 69 11 03 80 88 ff ff 00 46 d5 33 80 88 ff ff .i.......F.3....
10 42 d5 33 80 88 ff ff 10 42 d5 33 80 88 ff ff .B.3.....B.3....
backtrace:
[<00000000086bd4ed>] __kmalloc_node+0x1eb/0x360
[<00000000bdb68871>] kvmalloc_node+0x66/0x120
[<00000000fac74e4c>] v4l2_ctrl_new+0x7b9/0x1c60 [videodev]
[<00000000693bf940>] v4l2_ctrl_new_std+0x19b/0x270 [videodev]
[<00000000c0cb91bc>] si470x_i2c_probe+0x2d3/0x9a0 [radio_si470x_i2c]
[<0000000056a6f01f>] i2c_device_probe+0x4d8/0xbe0
Fix the error handling path to avoid memory leak.
Reported-by: Hulk Robot <[email protected]>
Fixes: 8c081b6f9a9b ("media: radio: Critical v4l2 registration...")
Signed-off-by: Yang Yingliang <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/radio/si470x/radio-si470x-i2c.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/media/radio/si470x/radio-si470x-i2c.c b/drivers/media/radio/si470x/radio-si470x-i2c.c
index a972c0705ac79..76d39e2e87706 100644
--- a/drivers/media/radio/si470x/radio-si470x-i2c.c
+++ b/drivers/media/radio/si470x/radio-si470x-i2c.c
@@ -368,7 +368,7 @@ static int si470x_i2c_probe(struct i2c_client *client)
if (radio->hdl.error) {
retval = radio->hdl.error;
dev_err(&client->dev, "couldn't register control\n");
- goto err_dev;
+ goto err_all;
}
/* video device initialization */
@@ -463,7 +463,6 @@ static int si470x_i2c_probe(struct i2c_client *client)
return 0;
err_all:
v4l2_ctrl_handler_free(&radio->hdl);
-err_dev:
v4l2_device_unregister(&radio->v4l2_dev);
err_initial:
return retval;
--
2.34.1
From: Nishanth Menon <[email protected]>
[ Upstream commit d0c826106f3fc11ff97285102b576b65576654ae ]
A72's L2 cache[1] on J7200[2] is 1MB. A72's L2 is fixed line length of
64 bytes and 16-way set-associative cache structure.
1MB of L2 / 64 (line length) = 16384 ways
16384 ways / 16 = 1024 sets
Fix the l2 cache-sets.
[1] https://developer.arm.com/documentation/100095/0003/Level-2-Memory-System/About-the-L2-memory-system
[2] https://www.ti.com/lit/pdf/spruiu1
Fixes: d361ed88455f ("arm64: dts: ti: Add support for J7200 SoC")
Reported-by: Peng Fan <[email protected]>
Signed-off-by: Nishanth Menon <[email protected]>
Reviewed-by: Pratyush Yadav <[email protected]>
Signed-off-by: Vignesh Raghavendra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/ti/k3-j7200.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/ti/k3-j7200.dtsi b/arch/arm64/boot/dts/ti/k3-j7200.dtsi
index 66169bcf7c9a4..081b8f3d44c44 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200.dtsi
@@ -84,7 +84,7 @@
cache-level = <2>;
cache-size = <0x100000>;
cache-line-size = <64>;
- cache-sets = <2048>;
+ cache-sets = <1024>;
next-level-cache = <&msmc_l3>;
};
--
2.34.1
From: Nicolas Toromanoff <[email protected]>
[ Upstream commit fa97dc2d48b476ea98199d808d3248d285987e99 ]
This fixes the lrw autotest if lrw uses the CRYP as the AES block cipher
provider (as ecb(aes)). At end of request, CRYP should not update the IV
in case of ECB chaining mode. Indeed the ECB chaining mode never uses
the IV, but the software LRW chaining mode uses the IV field as
a counter and due to the (unexpected) update done by CRYP while the AES
block process, the counter get a wrong value when the IV overflow.
Fixes: 5f49f18d27cd ("crypto: stm32/cryp - update to return iv_out")
Signed-off-by: Nicolas Toromanoff <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/crypto/stm32/stm32-cryp.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/crypto/stm32/stm32-cryp.c b/drivers/crypto/stm32/stm32-cryp.c
index 061db567908ae..9943836a5c25c 100644
--- a/drivers/crypto/stm32/stm32-cryp.c
+++ b/drivers/crypto/stm32/stm32-cryp.c
@@ -644,7 +644,7 @@ static void stm32_cryp_finish_req(struct stm32_cryp *cryp, int err)
/* Phase 4 : output tag */
err = stm32_cryp_read_auth_tag(cryp);
- if (!err && (!(is_gcm(cryp) || is_ccm(cryp))))
+ if (!err && (!(is_gcm(cryp) || is_ccm(cryp) || is_ecb(cryp))))
stm32_cryp_get_iv(cryp);
if (cryp->sgs_copied) {
--
2.34.1
From: Lizhi Hou <[email protected]>
[ Upstream commit 3672fb65155530b5eea6225685c75329b6debec3 ]
The base address of uartlite registers could be 64 bit address which is from
device resource. When ulite_probe() calls ulite_assign(), this 64 bit
address is casted to 32-bit. The fix is to replace "u32" type with
"phys_addr_t" type for the base address in ulite_assign() argument list.
Fixes: 8fa7b6100693 ("[POWERPC] Uartlite: Separate the bus binding from the driver proper")
Signed-off-by: Lizhi Hou <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/tty/serial/uartlite.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/tty/serial/uartlite.c b/drivers/tty/serial/uartlite.c
index 7081ab322b402..48923cd8c07d1 100644
--- a/drivers/tty/serial/uartlite.c
+++ b/drivers/tty/serial/uartlite.c
@@ -615,7 +615,7 @@ static struct uart_driver ulite_uart_driver = {
*
* Returns: 0 on success, <0 otherwise
*/
-static int ulite_assign(struct device *dev, int id, u32 base, int irq,
+static int ulite_assign(struct device *dev, int id, phys_addr_t base, int irq,
struct uartlite_data *pdata)
{
struct uart_port *port;
--
2.34.1
From: Chengfeng Ye <[email protected]>
[ Upstream commit b4cb4d31631912842eb7dce02b4350cbb7562d5e ]
Pointer base points to sub field of tmpl, it
is dereferenced after tmpl is freed. Fix
this by accessing base before free tmpl.
Fixes: ec8f5d8f ("crypto: qce - Qualcomm crypto engine driver")
Signed-off-by: Chengfeng Ye <[email protected]>
Acked-by: Thara Gopinath <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/crypto/qce/sha.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/crypto/qce/sha.c b/drivers/crypto/qce/sha.c
index 87be96a0b0bba..8b4e79d882af4 100644
--- a/drivers/crypto/qce/sha.c
+++ b/drivers/crypto/qce/sha.c
@@ -533,8 +533,8 @@ static int qce_ahash_register_one(const struct qce_ahash_def *def,
ret = crypto_register_ahash(alg);
if (ret) {
- kfree(tmpl);
dev_err(qce->dev, "%s registration failed\n", base->cra_name);
+ kfree(tmpl);
return ret;
}
--
2.34.1
From: Dan Carpenter <[email protected]>
[ Upstream commit cebbb5c46d0cb0615fd0c62dea9b44273d0a9780 ]
The devm_gen_pool_create() function never returns NULL, it returns
error pointers.
Fixes: 4cc9b565454b ("drm/vboxvideo: Use devm_gen_pool_create")
Signed-off-by: Dan Carpenter <[email protected]>
Reviewed-by: Hans de Goede <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20211118111233.GA1147@kili
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/vboxvideo/vbox_main.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/vboxvideo/vbox_main.c b/drivers/gpu/drm/vboxvideo/vbox_main.c
index d68d9bad76747..c5ea880d17b29 100644
--- a/drivers/gpu/drm/vboxvideo/vbox_main.c
+++ b/drivers/gpu/drm/vboxvideo/vbox_main.c
@@ -123,8 +123,8 @@ int vbox_hw_init(struct vbox_private *vbox)
/* Create guest-heap mem-pool use 2^4 = 16 byte chunks */
vbox->guest_pool = devm_gen_pool_create(vbox->ddev.dev, 4, -1,
"vboxvideo-accel");
- if (!vbox->guest_pool)
- return -ENOMEM;
+ if (IS_ERR(vbox->guest_pool))
+ return PTR_ERR(vbox->guest_pool);
ret = gen_pool_add_virt(vbox->guest_pool,
(unsigned long)vbox->guest_heap,
--
2.34.1
From: Jiasheng Jiang <[email protected]>
[ Upstream commit 43f0633f89947df57fe0b5025bdd741768007708 ]
The return value of dma_set_coherent_mask() is not always 0.
To catch the exception in case that dma is not support the mask.
Link: https://lore.kernel.org/linux-media/[email protected]
Fixes: b0444f18e0b1 ("[media] coda: add i.MX6 VDOA driver")
Signed-off-by: Jiasheng Jiang <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/platform/coda/imx-vdoa.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/media/platform/coda/imx-vdoa.c b/drivers/media/platform/coda/imx-vdoa.c
index 8bc0d83718193..dd6e2e320264e 100644
--- a/drivers/media/platform/coda/imx-vdoa.c
+++ b/drivers/media/platform/coda/imx-vdoa.c
@@ -287,7 +287,11 @@ static int vdoa_probe(struct platform_device *pdev)
struct resource *res;
int ret;
- dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
+ ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
+ if (ret) {
+ dev_err(&pdev->dev, "DMA enable failed\n");
+ return ret;
+ }
vdoa = devm_kzalloc(&pdev->dev, sizeof(*vdoa), GFP_KERNEL);
if (!vdoa)
--
2.34.1
From: Tasos Sahanidis <[email protected]>
[ Upstream commit fb48febce7e30baed94dd791e19521abd2c3fd83 ]
When the watchdog detects a disk change, it calls cancel_activity(),
which in turn tries to cancel the fd_timer delayed work.
In the above scenario, fd_timer_fn is set to fd_watchdog(), meaning
it is trying to cancel its own work.
This results in a hang as cancel_delayed_work_sync() is waiting for the
watchdog (itself) to return, which never happens.
This can be reproduced relatively consistently by attempting to read a
broken floppy, and ejecting it while IO is being attempted and retried.
To resolve this, this patch calls cancel_delayed_work() instead, which
cancels the work without waiting for the watchdog to return and finish.
Before this regression was introduced, the code in this section used
del_timer(), and not del_timer_sync() to delete the watchdog timer.
Link: https://lore.kernel.org/r/[email protected]
Fixes: 070ad7e793dc ("floppy: convert to delayed work and single-thread wq")
Signed-off-by: Tasos Sahanidis <[email protected]>
Signed-off-by: Denis Efremov <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/block/floppy.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
index 7df79ae6b0a1e..eb4f841902aee 100644
--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -1015,7 +1015,7 @@ static DECLARE_DELAYED_WORK(fd_timer, fd_timer_workfn);
static void cancel_activity(void)
{
do_floppy = NULL;
- cancel_delayed_work_sync(&fd_timer);
+ cancel_delayed_work(&fd_timer);
cancel_work_sync(&floppy_work);
}
--
2.34.1
From: Sean Wang <[email protected]>
[ Upstream commit 561ae1d46a8ddcbc13162d5771f5ed6c8249e730 ]
btmtksdio have to rely on MMC_PM_KEEP_POWER in pm_flags to avoid that
SDIO power is being shut off during the device is in suspend. That fixes
the SDIO command fails to access the bus after the device is resumed.
Fixes: 7f3c563c575e7 ("Bluetooth: btmtksdio: Add runtime PM support to SDIO based Bluetooth")
Co-developed-by: Mark-yw Chen <[email protected]>
Signed-off-by: Mark-yw Chen <[email protected]>
Signed-off-by: Sean Wang <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/bluetooth/btmtksdio.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/bluetooth/btmtksdio.c b/drivers/bluetooth/btmtksdio.c
index 5f9f027956317..74856a5862162 100644
--- a/drivers/bluetooth/btmtksdio.c
+++ b/drivers/bluetooth/btmtksdio.c
@@ -1042,6 +1042,8 @@ static int btmtksdio_runtime_suspend(struct device *dev)
if (!bdev)
return 0;
+ sdio_set_host_pm_flags(func, MMC_PM_KEEP_POWER);
+
sdio_claim_host(bdev->func);
sdio_writel(bdev->func, C_FW_OWN_REQ_SET, MTK_REG_CHLPCR, &err);
--
2.34.1
From: Chengfeng Ye <[email protected]>
[ Upstream commit e9c195aaeed1b45c9012adbe29dedb6031e85aa8 ]
Pointer alg points to sub field of tmpl, it
is dereferenced after tmpl is freed. Fix
this by accessing alg before free tmpl.
Fixes: ec8f5d8f ("crypto: qce - Qualcomm crypto engine driver")
Signed-off-by: Chengfeng Ye <[email protected]>
Acked-by: Thara Gopinath <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/crypto/qce/skcipher.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/crypto/qce/skcipher.c b/drivers/crypto/qce/skcipher.c
index d8053789c8828..89c7fc3efbd71 100644
--- a/drivers/crypto/qce/skcipher.c
+++ b/drivers/crypto/qce/skcipher.c
@@ -433,8 +433,8 @@ static int qce_skcipher_register_one(const struct qce_skcipher_def *def,
ret = crypto_register_skcipher(alg);
if (ret) {
- kfree(tmpl);
dev_err(qce->dev, "%s registration failed\n", alg->base.cra_name);
+ kfree(tmpl);
return ret;
}
--
2.34.1
From: Wang Hai <[email protected]>
[ Upstream commit ab599eb11882f834951c436cc080c3455ba32b9b ]
I got a use-after-free report:
dvbdev: dvb_register_device: failed to create device dvb1.dvr0 (-12)
...
==================================================================
BUG: KASAN: use-after-free in dvb_dmxdev_release+0xce/0x2f0
...
Call Trace:
dump_stack_lvl+0x6c/0x8b
print_address_description.constprop.0+0x48/0x70
kasan_report.cold+0x82/0xdb
__asan_load4+0x6b/0x90
dvb_dmxdev_release+0xce/0x2f0
...
Allocated by task 7666:
kasan_save_stack+0x23/0x50
__kasan_kmalloc+0x83/0xa0
kmem_cache_alloc_trace+0x22e/0x470
dvb_register_device+0x12f/0x980
dvb_dmxdev_init+0x1f3/0x230
...
Freed by task 7666:
kasan_save_stack+0x23/0x50
kasan_set_track+0x20/0x30
kasan_set_free_info+0x24/0x40
__kasan_slab_free+0xf2/0x130
kfree+0xd1/0x5c0
dvb_register_device.cold+0x1ac/0x1fa
dvb_dmxdev_init+0x1f3/0x230
...
When dvb_register_device() in dvb_dmxdev_init() fails, dvb_dmxdev_init()
does not return a failure, and the memory pointed to by dvbdev or
dvr_dvbdev is invalid at this point. If they are used subsequently, it
will result in UFA or null-ptr-deref.
If dvb_register_device() in dvb_dmxdev_init() fails, fix the bug by making
dvb_dmxdev_init() return an error as well.
Link: https://lore.kernel.org/linux-media/[email protected]
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Wang Hai <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/dvb-core/dmxdev.c | 18 +++++++++++++++---
1 file changed, 15 insertions(+), 3 deletions(-)
diff --git a/drivers/media/dvb-core/dmxdev.c b/drivers/media/dvb-core/dmxdev.c
index f14a872d12687..e58cb8434dafe 100644
--- a/drivers/media/dvb-core/dmxdev.c
+++ b/drivers/media/dvb-core/dmxdev.c
@@ -1413,7 +1413,7 @@ static const struct dvb_device dvbdev_dvr = {
};
int dvb_dmxdev_init(struct dmxdev *dmxdev, struct dvb_adapter *dvb_adapter)
{
- int i;
+ int i, ret;
if (dmxdev->demux->open(dmxdev->demux) < 0)
return -EUSERS;
@@ -1432,14 +1432,26 @@ int dvb_dmxdev_init(struct dmxdev *dmxdev, struct dvb_adapter *dvb_adapter)
DMXDEV_STATE_FREE);
}
- dvb_register_device(dvb_adapter, &dmxdev->dvbdev, &dvbdev_demux, dmxdev,
+ ret = dvb_register_device(dvb_adapter, &dmxdev->dvbdev, &dvbdev_demux, dmxdev,
DVB_DEVICE_DEMUX, dmxdev->filternum);
- dvb_register_device(dvb_adapter, &dmxdev->dvr_dvbdev, &dvbdev_dvr,
+ if (ret < 0)
+ goto err_register_dvbdev;
+
+ ret = dvb_register_device(dvb_adapter, &dmxdev->dvr_dvbdev, &dvbdev_dvr,
dmxdev, DVB_DEVICE_DVR, dmxdev->filternum);
+ if (ret < 0)
+ goto err_register_dvr_dvbdev;
dvb_ringbuffer_init(&dmxdev->dvr_buffer, NULL, 8192);
return 0;
+
+err_register_dvr_dvbdev:
+ dvb_unregister_device(dmxdev->dvbdev);
+err_register_dvbdev:
+ vfree(dmxdev->filter);
+ dmxdev->filter = NULL;
+ return ret;
}
EXPORT_SYMBOL(dvb_dmxdev_init);
--
2.34.1
From: Robin Murphy <[email protected]>
[ Upstream commit 5566174cb10a5167d59b0793871cab7990b149b8 ]
Upon failure, dma_alloc_coherent() returns NULL. If that does happen,
passing some uninitialised stack contents to dma_mapping_error() - which
belongs to a different API in the first place - has precious little
chance of detecting it.
Also include the correct header, because the fragile transitive
inclusion currently providing it is going to break soon.
Fixes: 20e7dce255e9 ("drm/tegra: Remove memory allocation from Falcon library")
CC: Thierry Reding <[email protected]>
CC: Mikko Perttunen <[email protected]>
CC: [email protected]
Signed-off-by: Robin Murphy <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/tegra/vic.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/tegra/vic.c b/drivers/gpu/drm/tegra/vic.c
index b77f726303d89..ec0e4d8f0aade 100644
--- a/drivers/gpu/drm/tegra/vic.c
+++ b/drivers/gpu/drm/tegra/vic.c
@@ -5,6 +5,7 @@
#include <linux/clk.h>
#include <linux/delay.h>
+#include <linux/dma-mapping.h>
#include <linux/host1x.h>
#include <linux/iommu.h>
#include <linux/module.h>
@@ -265,10 +266,8 @@ static int vic_load_firmware(struct vic *vic)
if (!client->group) {
virt = dma_alloc_coherent(vic->dev, size, &iova, GFP_KERNEL);
-
- err = dma_mapping_error(vic->dev, iova);
- if (err < 0)
- return err;
+ if (!virt)
+ return -ENOMEM;
} else {
virt = tegra_drm_alloc(tegra, size, &iova);
}
--
2.34.1
From: Arseny Demidov <[email protected]>
[ Upstream commit a8d6d4992ad9d92356619ac372906bd29687bb46 ]
In the file mr75203.c we have a macro named POWER_DELAY_CYCLE_256,
the correct value should be 0x100. The register ip_tmr is expressed
in units of IP clk cycles, in accordance with the datasheet.
Typical power-up delays for Temperature Sensor are 256 cycles i.e. 0x100.
Fixes: 9d823351a337 ("hwmon: Add hardware monitoring driver for Moortec MR75203 PVT controller")
Signed-off-by: Arseny Demidov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hwmon/mr75203.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/hwmon/mr75203.c b/drivers/hwmon/mr75203.c
index 18da5a25e89ab..046523d47c29b 100644
--- a/drivers/hwmon/mr75203.c
+++ b/drivers/hwmon/mr75203.c
@@ -93,7 +93,7 @@
#define VM_CH_REQ BIT(21)
#define IP_TMR 0x05
-#define POWER_DELAY_CYCLE_256 0x80
+#define POWER_DELAY_CYCLE_256 0x100
#define POWER_DELAY_CYCLE_64 0x40
#define PVT_POLL_DELAY_US 20
--
2.34.1
From: Zhang Zixun <[email protected]>
[ Upstream commit de768416b203ac84e02a757b782a32efb388476f ]
A contrived zero-length write, for example, by using write(2):
...
ret = write(fd, str, 0);
...
to the "flags" file causes:
BUG: KASAN: stack-out-of-bounds in flags_write
Write of size 1 at addr ffff888019be7ddf by task writefile/3787
CPU: 4 PID: 3787 Comm: writefile Not tainted 5.16.0-rc7+ #12
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
due to accessing buf one char before its start.
Prevent such out-of-bounds access.
[ bp: Productize into a proper patch. Link below is the next best
thing because the original mail didn't get archived on lore. ]
Fixes: 0451d14d0561 ("EDAC, mce_amd_inj: Modify flags attribute to use string arguments")
Signed-off-by: Zhang Zixun <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Link: https://lore.kernel.org/linux-edac/[email protected]/
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/kernel/cpu/mce/inject.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/x86/kernel/cpu/mce/inject.c b/arch/x86/kernel/cpu/mce/inject.c
index 3a44346f22766..e7808309d4710 100644
--- a/arch/x86/kernel/cpu/mce/inject.c
+++ b/arch/x86/kernel/cpu/mce/inject.c
@@ -347,7 +347,7 @@ static ssize_t flags_write(struct file *filp, const char __user *ubuf,
char buf[MAX_FLAG_OPT_SIZE], *__buf;
int err;
- if (cnt > MAX_FLAG_OPT_SIZE)
+ if (!cnt || cnt > MAX_FLAG_OPT_SIZE)
return -EINVAL;
if (copy_from_user(&buf, ubuf, cnt))
--
2.34.1
From: Clément Léger <[email protected]>
[ Upstream commit c5fc5ba8b6b7bebc05e45036a33405b4c5036c2f ]
nargs_prop refers to a property located in the reference that is found
within the nargs property. Use the correct reference node in call to
property_entry_read_int_array() to retrieve the correct nargs value.
Fixes: b06184acf751 ("software node: Add software_node_get_reference_args()")
Signed-off-by: Clément Léger <[email protected]>
Reviewed-by: Sakari Ailus <[email protected]>
Reviewed-by: Daniel Scally <[email protected]>
Acked-by: Heikki Krogerus <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/base/swnode.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/base/swnode.c b/drivers/base/swnode.c
index 206bd4d7d7e23..d2fb3eb5816c3 100644
--- a/drivers/base/swnode.c
+++ b/drivers/base/swnode.c
@@ -519,7 +519,7 @@ software_node_get_reference_args(const struct fwnode_handle *fwnode,
return -ENOENT;
if (nargs_prop) {
- error = property_entry_read_int_array(swnode->node->properties,
+ error = property_entry_read_int_array(ref->node->properties,
nargs_prop, sizeof(u32),
&nargs_prop_val, 1);
if (error)
--
2.34.1
From: Wei Yongjun <[email protected]>
[ Upstream commit 1646566b5e0c556f779180a8514e521ac735de1e ]
'ftdi' is alloced when probe device, but not free on device disconnect,
this cause a memory leak as follows:
unreferenced object 0xffff88800d584000 (size 8400):
comm "kworker/0:2", pid 3809, jiffies 4295453055 (age 13.784s)
hex dump (first 32 bytes):
00 40 58 0d 80 88 ff ff 00 40 58 0d 80 88 ff ff .@X......@X.....
00 00 00 00 00 00 00 00 00 00 00 00 ad 4e ad de .............N..
backtrace:
[<000000000d47f947>] kmalloc_order_trace+0x19/0x110 mm/slab_common.c:960
[<000000008548ac68>] ftdi_elan_probe+0x8c/0x880 drivers/usb/misc/ftdi-elan.c:2647
[<000000007f73e422>] usb_probe_interface+0x31b/0x800 drivers/usb/core/driver.c:396
[<00000000fe8d07fc>] really_probe+0x299/0xc30 drivers/base/dd.c:517
[<0000000005da7d32>] __driver_probe_device+0x357/0x500 drivers/base/dd.c:751
[<000000003c2c9579>] driver_probe_device+0x4e/0x140 drivers/base/dd.c:781
Fix it by freeing 'ftdi' after nobody use it.
Fixes: a5c66e4b2418 ("USB: ftdi-elan: client driver for ELAN Uxxx adapters")
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Wei Yongjun <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/misc/ftdi-elan.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/usb/misc/ftdi-elan.c b/drivers/usb/misc/ftdi-elan.c
index 8a3d9c0c8d8bc..157b31d354ac2 100644
--- a/drivers/usb/misc/ftdi-elan.c
+++ b/drivers/usb/misc/ftdi-elan.c
@@ -202,6 +202,7 @@ static void ftdi_elan_delete(struct kref *kref)
mutex_unlock(&ftdi_module_lock);
kfree(ftdi->bulk_in_buffer);
ftdi->bulk_in_buffer = NULL;
+ kfree(ftdi);
}
static void ftdi_elan_put_kref(struct usb_ftdi *ftdi)
--
2.34.1
From: Nishanth Menon <[email protected]>
[ Upstream commit a172c86931709d6663318609d71a811333bdf4b0 ]
A72 Cluster (chapter 1.3.1 [1]) has 48KB Icache, 32KB Dcache and 1MB L2 Cache
- ICache is 3-way set-associative
- Dcache is 2-way set-associative
- Line size are 64bytes
32KB (Dcache)/64 (fixed line length of 64 bytes) = 512 ways
512 ways / 2 (Dcache is 2-way per set) = 256 sets.
So, correct the d-cache-sets info.
[1] https://www.ti.com/lit/pdf/spruiu1
Fixes: d361ed88455f ("arm64: dts: ti: Add support for J7200 SoC")
Reported-by: Peng Fan <[email protected]>
Signed-off-by: Nishanth Menon <[email protected]>
Reviewed-by: Pratyush Yadav <[email protected]>
Reviewed-by: Kishon Vijay Abraham I <[email protected]>
Signed-off-by: Vignesh Raghavendra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/ti/k3-j7200.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-j7200.dtsi b/arch/arm64/boot/dts/ti/k3-j7200.dtsi
index 081b8f3d44c44..03a9623f0f956 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200.dtsi
@@ -60,7 +60,7 @@
i-cache-sets = <256>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
- d-cache-sets = <128>;
+ d-cache-sets = <256>;
next-level-cache = <&L2_0>;
};
@@ -74,7 +74,7 @@
i-cache-sets = <256>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
- d-cache-sets = <128>;
+ d-cache-sets = <256>;
next-level-cache = <&L2_0>;
};
};
--
2.34.1
From: Tsuchiya Yuto <[email protected]>
[ Upstream commit 9f6b4fa2d2dfbff4b8a57eeb39b1128a6094ee20 ]
Currently, the `port >= N_CSI_PORTS || err` checks for ISP2400 are always
evaluated as true because the err variable is set to `-EINVAL` on
declaration but the variable is never used until the evaluation.
Looking at the diff of commit 3c0538fbad9f ("media: atomisp: get rid of
most checks for ISP2401 version"), the `port >= N_CSI_PORTS` check is
for ISP2400 and the err variable check is for ISP2401. Fix this issue
by adding ISP version test there accordingly.
Fixes: 3c0538fbad9f ("media: atomisp: get rid of most checks for ISP2401 version")
Signed-off-by: Tsuchiya Yuto <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/staging/media/atomisp/pci/sh_css_mipi.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/staging/media/atomisp/pci/sh_css_mipi.c b/drivers/staging/media/atomisp/pci/sh_css_mipi.c
index e18c0cfb4ce3a..34b71c1b7c1ec 100644
--- a/drivers/staging/media/atomisp/pci/sh_css_mipi.c
+++ b/drivers/staging/media/atomisp/pci/sh_css_mipi.c
@@ -446,7 +446,8 @@ allocate_mipi_frames(struct ia_css_pipe *pipe,
assert(port < N_CSI_PORTS);
- if (port >= N_CSI_PORTS || err) {
+ if ((!IS_ISP2401 && port >= N_CSI_PORTS) ||
+ (IS_ISP2401 && err)) {
ia_css_debug_dtrace(IA_CSS_DEBUG_TRACE_PRIVATE,
"allocate_mipi_frames(%p) exit: error: port is not correct (port=%d).\n",
pipe, port);
@@ -578,7 +579,8 @@ free_mipi_frames(struct ia_css_pipe *pipe) {
assert(port < N_CSI_PORTS);
- if (port >= N_CSI_PORTS || err) {
+ if ((!IS_ISP2401 && port >= N_CSI_PORTS) ||
+ (IS_ISP2401 && err)) {
ia_css_debug_dtrace(IA_CSS_DEBUG_TRACE_PRIVATE,
"free_mipi_frames(%p, %d) exit: error: pipe port is not correct.\n",
pipe, port);
@@ -690,7 +692,8 @@ send_mipi_frames(struct ia_css_pipe *pipe) {
assert(port < N_CSI_PORTS);
- if (port >= N_CSI_PORTS || err) {
+ if ((!IS_ISP2401 && port >= N_CSI_PORTS) ||
+ (IS_ISP2401 && err)) {
IA_CSS_ERROR("send_mipi_frames(%p) exit: invalid port specified (port=%d).\n",
pipe, port);
return err;
--
2.34.1
From: Karthikeyan Kathirvel <[email protected]>
[ Upstream commit 436a4e88659842a7cf634d7cc088c8f2cc94ebf5 ]
DISABLE_KEY sets the key_len to 0, firmware will not delete the keys if
key_len is 0. Changing from security mode to open mode will cause mcast
to be still encrypted without vdev restart.
Set the proper key_len for DISABLE_KEY cmd to clear the keys in
firmware.
Tested-on: IPQ6018 hw1.0 AHB WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1
Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Reported-by: Sven Eckelmann <[email protected]>
Signed-off-by: Karthikeyan Kathirvel <[email protected]>
[[email protected]: split into separate patches, clean up commit message]
Signed-off-by: Sven Eckelmann <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/ath11k/mac.c | 4 +---
drivers/net/wireless/ath/ath11k/wmi.c | 3 ++-
2 files changed, 3 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
index 0924bc8b35205..304e158f09751 100644
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -2395,9 +2395,7 @@ static int ath11k_install_key(struct ath11k_vif *arvif,
return 0;
if (cmd == DISABLE_KEY) {
- /* TODO: Check if FW expects value other than NONE for del */
- /* arg.key_cipher = WMI_CIPHER_NONE; */
- arg.key_len = 0;
+ arg.key_cipher = WMI_CIPHER_NONE;
arg.key_data = NULL;
goto install;
}
diff --git a/drivers/net/wireless/ath/ath11k/wmi.c b/drivers/net/wireless/ath/ath11k/wmi.c
index e84127165d858..acf1641ce88fd 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.c
+++ b/drivers/net/wireless/ath/ath11k/wmi.c
@@ -1665,7 +1665,8 @@ int ath11k_wmi_vdev_install_key(struct ath11k *ar,
tlv = (struct wmi_tlv *)(skb->data + sizeof(*cmd));
tlv->header = FIELD_PREP(WMI_TLV_TAG, WMI_TAG_ARRAY_BYTE) |
FIELD_PREP(WMI_TLV_LEN, key_len_aligned);
- memcpy(tlv->value, (u8 *)arg->key_data, key_len_aligned);
+ if (arg->key_data)
+ memcpy(tlv->value, (u8 *)arg->key_data, key_len_aligned);
ret = ath11k_wmi_cmd_send(wmi, skb, WMI_VDEV_INSTALL_KEY_CMDID);
if (ret) {
--
2.34.1
From: Tudor Ambarus <[email protected]>
[ Upstream commit 4f4b9b5895614eb2e2b5f4cab7858f44bd113e1b ]
The driver wrongly assummed that tx_submit() will start the transfer,
which is not the case, now that the at_xdmac driver is fixed. tx_submit
is supposed to push the current transaction descriptor to a pending queue,
waiting for issue_pending to be called. issue_pending must start the
transfer, not tx_submit.
Fixes: 34df42f59a60 ("serial: at91: add rx dma support")
Fixes: 08f738be88bb ("serial: at91: add tx dma support")
Signed-off-by: Tudor Ambarus <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/tty/serial/atmel_serial.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index 396fe8c51f93b..602065bfc9bb8 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -1009,6 +1009,8 @@ static void atmel_tx_dma(struct uart_port *port)
atmel_port->cookie_tx);
return;
}
+
+ dma_async_issue_pending(chan);
}
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
@@ -1275,6 +1277,8 @@ static int atmel_prepare_rx_dma(struct uart_port *port)
goto chan_err;
}
+ dma_async_issue_pending(atmel_port->chan_rx);
+
return 0;
chan_err:
--
2.34.1
From: Florian Westphal <[email protected]>
[ Upstream commit 28b78ecffea8078d81466b2e01bb5a154509f1ba ]
This makes 'bridge-nf-filter-pppoe-tagged' sysctl work for
bridged traffic.
Looking at the original commit it doesn't appear this ever worked:
static unsigned int br_nf_post_routing(unsigned int hook, struct sk_buff **pskb,
[..]
if (skb->protocol == htons(ETH_P_8021Q)) {
skb_pull(skb, VLAN_HLEN);
skb->network_header += VLAN_HLEN;
+ } else if (skb->protocol == htons(ETH_P_PPP_SES)) {
+ skb_pull(skb, PPPOE_SES_HLEN);
+ skb->network_header += PPPOE_SES_HLEN;
}
[..]
NF_HOOK(... POST_ROUTING, ...)
... but the adjusted offsets are never restored.
The alternative would be to rip this code out for good,
but otoh we'd have to keep this anyway for the vlan handling
(which works because vlan tag info is in the skb, not the packet
payload).
Reported-and-tested-by: Amish Chana <[email protected]>
Fixes: 516299d2f5b6f97 ("[NETFILTER]: bridge-nf: filter bridged IPv4/IPv6 encapsulated in pppoe traffic")
Signed-off-by: Florian Westphal <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/bridge/br_netfilter_hooks.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/net/bridge/br_netfilter_hooks.c b/net/bridge/br_netfilter_hooks.c
index 8edfb98ae1d58..68c0d0f928908 100644
--- a/net/bridge/br_netfilter_hooks.c
+++ b/net/bridge/br_netfilter_hooks.c
@@ -743,6 +743,9 @@ static int br_nf_dev_queue_xmit(struct net *net, struct sock *sk, struct sk_buff
if (nf_bridge->frag_max_size && nf_bridge->frag_max_size < mtu)
mtu = nf_bridge->frag_max_size;
+ nf_bridge_update_protocol(skb);
+ nf_bridge_push_encap_header(skb);
+
if (skb_is_gso(skb) || skb->len + mtu_reserved <= mtu) {
nf_bridge_info_free(skb);
return br_dev_queue_push_xmit(net, sk, skb);
@@ -760,8 +763,6 @@ static int br_nf_dev_queue_xmit(struct net *net, struct sock *sk, struct sk_buff
IPCB(skb)->frag_max_size = nf_bridge->frag_max_size;
- nf_bridge_update_protocol(skb);
-
data = this_cpu_ptr(&brnf_frag_data_storage);
if (skb_vlan_tag_present(skb)) {
@@ -789,8 +790,6 @@ static int br_nf_dev_queue_xmit(struct net *net, struct sock *sk, struct sk_buff
IP6CB(skb)->frag_max_size = nf_bridge->frag_max_size;
- nf_bridge_update_protocol(skb);
-
data = this_cpu_ptr(&brnf_frag_data_storage);
data->encap_size = nf_bridge_encap_header_len(skb);
data->size = ETH_HLEN + data->encap_size;
--
2.34.1
From: Baruch Siach <[email protected]>
[ Upstream commit 72cb4c48a46a7cfa58eb5842c0d3672ddd5bd9ad ]
There must be three parameters in gpio-ranges property. Fixes this not
very helpful error message:
OF: /soc/pinctrl@1000000: (null) = 3 found 3
Fixes: 1e8277854b49 ("arm64: dts: Add ipq6018 SoC and CP01 board support")
Cc: Sricharan R <[email protected]>
Signed-off-by: Baruch Siach <[email protected]>
Tested-by: Bryan O'Donoghue <[email protected]>
Signed-off-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/8a744cfd96aff5754bfdcf7298d208ddca5b319a.1638862030.git.baruch@tkos.co.il
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/qcom/ipq6018.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index 9cb8f7a052df9..2a1f03cdb52c7 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -221,7 +221,7 @@
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
- gpio-ranges = <&tlmm 0 80>;
+ gpio-ranges = <&tlmm 0 0 80>;
interrupt-controller;
#interrupt-cells = <2>;
--
2.34.1
From: Alexander Aring <[email protected]>
[ Upstream commit 1b9beda83e27a0c2cd75d1cb743c297c7b36c844 ]
This patch will surround the AF_INET6 case in sk_error_report() of dlm
with a #if IS_ENABLED(CONFIG_IPV6). The field sk->sk_v6_daddr is not
defined when CONFIG_IPV6 is disabled. If CONFIG_IPV6 is disabled, the
socket creation with AF_INET6 should already fail because a runtime
check if AF_INET6 is registered. However if there is the possibility
that AF_INET6 is set as sk_family the sk_error_report() callback will
print then an invalid family type error.
Reported-by: kernel test robot <[email protected]>
Fixes: 4c3d90570bcc ("fs: dlm: don't call kernel_getpeername() in error_report()")
Signed-off-by: Alexander Aring <[email protected]>
Signed-off-by: David Teigland <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/dlm/lowcomms.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/fs/dlm/lowcomms.c b/fs/dlm/lowcomms.c
index 904855fa20655..68b765369c928 100644
--- a/fs/dlm/lowcomms.c
+++ b/fs/dlm/lowcomms.c
@@ -491,6 +491,7 @@ static void lowcomms_error_report(struct sock *sk)
ntohs(inet->inet_dport), sk->sk_err,
sk->sk_err_soft);
break;
+#if IS_ENABLED(CONFIG_IPV6)
case AF_INET6:
printk_ratelimited(KERN_ERR "dlm: node %d: socket error "
"sending to node %d at %pI6c, "
@@ -499,6 +500,7 @@ static void lowcomms_error_report(struct sock *sk)
ntohs(inet->inet_dport), sk->sk_err,
sk->sk_err_soft);
break;
+#endif
default:
printk_ratelimited(KERN_ERR "dlm: node %d: socket error "
"invalid socket family %d set, "
--
2.34.1
From: Karthikeyan Kathirvel <[email protected]>
[ Upstream commit 64bc3aa02ae78b1fcb1b850e0eb1f0622002bfaa ]
The ath11k driver is caching the information about RSN/WPA IE in the
configured beacon template. The cached information is used during
associations to figure out whether 4-way PKT/2-way GTK peer flags need to
be set or not.
But the code never cleared the state when no such IE was found. This can
for example happen when moving from an WPA/RSN to an open setup. The
(seemingly connected) peer was then not able to communicate over the
link because the firmware assumed a different (encryption enabled) state
for the peer.
Tested-on: IPQ6018 hw1.0 AHB WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1
Fixes: 01e34233c645 ("ath11k: fix wmi peer flags in peer assoc command")
Cc: Venkateswara Naralasetty <[email protected]>
Reported-by: Sven Eckelmann <[email protected]>
Signed-off-by: Karthikeyan Kathirvel <[email protected]>
[[email protected]: split into separate patches, clean up commit message]
Signed-off-by: Sven Eckelmann <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/ath11k/mac.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
index 304e158f09751..b4f8494e3c707 100644
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -792,11 +792,15 @@ static int ath11k_mac_setup_bcn_tmpl(struct ath11k_vif *arvif)
if (cfg80211_find_ie(WLAN_EID_RSN, ies, (skb_tail_pointer(bcn) - ies)))
arvif->rsnie_present = true;
+ else
+ arvif->rsnie_present = false;
if (cfg80211_find_vendor_ie(WLAN_OUI_MICROSOFT,
WLAN_OUI_TYPE_MICROSOFT_WPA,
ies, (skb_tail_pointer(bcn) - ies)))
arvif->wpaie_present = true;
+ else
+ arvif->wpaie_present = false;
ret = ath11k_wmi_bcn_tmpl(ar, arvif->vdev_id, &offs, bcn);
--
2.34.1
From: Dmitry Baryshkov <[email protected]>
[ Upstream commit f31b0e24d31e18b4503eeaf0032baeacc0beaff6 ]
Make safe_status debugfs fs file actually return safe status rather than
danger status data.
Fixes: 25fdd5933e4c ("drm/msm: Add SDM845 DPU support")
Signed-off-by: Dmitry Baryshkov <[email protected]>
Reviewed-by: Abhinav Kumar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Baryshkov <[email protected]>
Signed-off-by: Rob Clark <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
index b4a2e8eb35dd2..08e082d0443af 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
@@ -71,8 +71,8 @@ static int _dpu_danger_signal_status(struct seq_file *s,
&status);
} else {
seq_puts(s, "\nSafe signal status:\n");
- if (kms->hw_mdp->ops.get_danger_status)
- kms->hw_mdp->ops.get_danger_status(kms->hw_mdp,
+ if (kms->hw_mdp->ops.get_safe_status)
+ kms->hw_mdp->ops.get_safe_status(kms->hw_mdp,
&status);
}
pm_runtime_put_sync(&kms->pdev->dev);
--
2.34.1
From: Nathan Errera <[email protected]>
[ Upstream commit 998e1aba6e5eb35370eaf30ccc1823426ec11f90 ]
In some cases the sta is being removed twice since we do not test the
roc aux running before removing it. Start looking at the bit before
removing the sta.
Signed-off-by: Nathan Errera <[email protected]>
Fixes: 2c2c3647cde4 ("iwlwifi: mvm: support ADD_STA_CMD_API_S ver 12")
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20211219121514.d5376ac6bcb0.Ic5f8470ea60c072bde9d1503e5f528b65e301e20@changeid
Signed-off-by: Luca Coelho <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../net/wireless/intel/iwlwifi/mvm/time-event.c | 15 ++++++++++++---
1 file changed, 12 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/time-event.c b/drivers/net/wireless/intel/iwlwifi/mvm/time-event.c
index 394598b14a173..a633ad5f8ca4e 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/time-event.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/time-event.c
@@ -98,14 +98,13 @@ void iwl_mvm_roc_done_wk(struct work_struct *wk)
struct iwl_mvm *mvm = container_of(wk, struct iwl_mvm, roc_done_wk);
/*
- * Clear the ROC_RUNNING /ROC_AUX_RUNNING status bit.
+ * Clear the ROC_RUNNING status bit.
* This will cause the TX path to drop offchannel transmissions.
* That would also be done by mac80211, but it is racy, in particular
* in the case that the time event actually completed in the firmware
* (which is handled in iwl_mvm_te_handle_notif).
*/
clear_bit(IWL_MVM_STATUS_ROC_RUNNING, &mvm->status);
- clear_bit(IWL_MVM_STATUS_ROC_AUX_RUNNING, &mvm->status);
synchronize_net();
@@ -131,9 +130,19 @@ void iwl_mvm_roc_done_wk(struct work_struct *wk)
mvmvif = iwl_mvm_vif_from_mac80211(mvm->p2p_device_vif);
iwl_mvm_flush_sta(mvm, &mvmvif->bcast_sta, true);
}
- } else {
+ }
+
+ /*
+ * Clear the ROC_AUX_RUNNING status bit.
+ * This will cause the TX path to drop offchannel transmissions.
+ * That would also be done by mac80211, but it is racy, in particular
+ * in the case that the time event actually completed in the firmware
+ * (which is handled in iwl_mvm_te_handle_notif).
+ */
+ if (test_and_clear_bit(IWL_MVM_STATUS_ROC_AUX_RUNNING, &mvm->status)) {
/* do the same in case of hot spot 2.0 */
iwl_mvm_flush_sta(mvm, &mvm->aux_sta, true);
+
/* In newer version of this command an aux station is added only
* in cases of dedicated tx queue and need to be removed in end
* of use */
--
2.34.1
From: Marijn Suijten <[email protected]>
[ Upstream commit ec961cf3241153e0f27d850f1bf0f172e7d27a21 ]
The hardware is capable of controlling any non-contiguous sequence of
LEDs specified in the DT using qcom,enabled-strings as u32
array, and this also follows from the DT-bindings documentation. The
numbers specified in this array represent indices of the LED strings
that are to be enabled and disabled.
Its value is appropriately used to setup and enable string modules, but
completely disregarded in the set_brightness paths which only iterate
over the number of strings linearly.
Take an example where only string 2 is enabled with
qcom,enabled_strings=<2>: this string is appropriately enabled but
subsequent brightness changes would have only touched the zero'th
brightness register because num_strings is 1 here. This is simply
addressed by looking up the string for this index in the enabled_strings
array just like the other codepaths that iterate over num_strings.
Likewise enabled_strings is now also used in the autodetection path for
consistent behaviour: when a list of strings is specified in DT only
those strings will be probed for autodetection, analogous to how the
number of strings that need to be probed is already bound by
qcom,num-strings. After all autodetection uses the set_brightness
helpers to set an initial value, which could otherwise end up changing
brightness on a different set of strings.
Fixes: 775d2ffb4af6 ("backlight: qcom-wled: Restructure the driver for WLED3")
Fixes: 03b2b5e86986 ("backlight: qcom-wled: Add support for WLED4 peripheral")
Signed-off-by: Marijn Suijten <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Reviewed-by: Daniel Thompson <[email protected]>
Signed-off-by: Lee Jones <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/video/backlight/qcom-wled.c | 22 ++++++++++++----------
1 file changed, 12 insertions(+), 10 deletions(-)
diff --git a/drivers/video/backlight/qcom-wled.c b/drivers/video/backlight/qcom-wled.c
index 13368044d0a75..486d35da01507 100644
--- a/drivers/video/backlight/qcom-wled.c
+++ b/drivers/video/backlight/qcom-wled.c
@@ -237,7 +237,7 @@ static int wled3_set_brightness(struct wled *wled, u16 brightness)
for (i = 0; i < wled->cfg.num_strings; ++i) {
rc = regmap_bulk_write(wled->regmap, wled->ctrl_addr +
- WLED3_SINK_REG_BRIGHT(i),
+ WLED3_SINK_REG_BRIGHT(wled->cfg.enabled_strings[i]),
&v, sizeof(v));
if (rc < 0)
return rc;
@@ -260,7 +260,7 @@ static int wled4_set_brightness(struct wled *wled, u16 brightness)
for (i = 0; i < wled->cfg.num_strings; ++i) {
rc = regmap_bulk_write(wled->regmap, wled->sink_addr +
- WLED4_SINK_REG_BRIGHT(i),
+ WLED4_SINK_REG_BRIGHT(wled->cfg.enabled_strings[i]),
&v, sizeof(v));
if (rc < 0)
return rc;
@@ -571,7 +571,7 @@ unlock_mutex:
static void wled_auto_string_detection(struct wled *wled)
{
- int rc = 0, i, delay_time_us;
+ int rc = 0, i, j, delay_time_us;
u32 sink_config = 0;
u8 sink_test = 0, sink_valid = 0, val;
bool fault_set;
@@ -618,14 +618,15 @@ static void wled_auto_string_detection(struct wled *wled)
/* Iterate through the strings one by one */
for (i = 0; i < wled->cfg.num_strings; i++) {
- sink_test = BIT((WLED4_SINK_REG_CURR_SINK_SHFT + i));
+ j = wled->cfg.enabled_strings[i];
+ sink_test = BIT((WLED4_SINK_REG_CURR_SINK_SHFT + j));
/* Enable feedback control */
rc = regmap_write(wled->regmap, wled->ctrl_addr +
- WLED3_CTRL_REG_FEEDBACK_CONTROL, i + 1);
+ WLED3_CTRL_REG_FEEDBACK_CONTROL, j + 1);
if (rc < 0) {
dev_err(wled->dev, "Failed to enable feedback for SINK %d rc = %d\n",
- i + 1, rc);
+ j + 1, rc);
goto failed_detect;
}
@@ -634,7 +635,7 @@ static void wled_auto_string_detection(struct wled *wled)
WLED4_SINK_REG_CURR_SINK, sink_test);
if (rc < 0) {
dev_err(wled->dev, "Failed to configure SINK %d rc=%d\n",
- i + 1, rc);
+ j + 1, rc);
goto failed_detect;
}
@@ -661,7 +662,7 @@ static void wled_auto_string_detection(struct wled *wled)
if (fault_set)
dev_dbg(wled->dev, "WLED OVP fault detected with SINK %d\n",
- i + 1);
+ j + 1);
else
sink_valid |= sink_test;
@@ -701,15 +702,16 @@ static void wled_auto_string_detection(struct wled *wled)
/* Enable valid sinks */
if (wled->version == 4) {
for (i = 0; i < wled->cfg.num_strings; i++) {
+ j = wled->cfg.enabled_strings[i];
if (sink_config &
- BIT(WLED4_SINK_REG_CURR_SINK_SHFT + i))
+ BIT(WLED4_SINK_REG_CURR_SINK_SHFT + j))
val = WLED4_SINK_REG_STR_MOD_MASK;
else
/* Disable modulator_en for unused sink */
val = 0;
rc = regmap_write(wled->regmap, wled->sink_addr +
- WLED4_SINK_REG_STR_MOD_EN(i), val);
+ WLED4_SINK_REG_STR_MOD_EN(j), val);
if (rc < 0) {
dev_err(wled->dev, "Failed to configure MODULATOR_EN rc=%d\n",
rc);
--
2.34.1
From: Hans de Goede <[email protected]>
[ Upstream commit f85196bdd5a50da74670250564740fc852b3c239 ]
BCM4752 and LNV4752 ACPI nodes describe a Broadcom 4752 GPS module
attached to an UART of the system.
The GPS modules talk a custom protocol which only works with a closed-
source Android gpsd daemon which knows this protocol.
The ACPI nodes also describe GPIOs to turn the GPS on/off these are
handled by the net/rfkill/rfkill-gpio.c code. This handling predates the
addition of enumeration of ACPI instantiated serdevs to the kernel and
was broken by that addition, because the ACPI scan code now no longer
instantiates platform_device-s for these nodes.
Rename the i2c_multi_instantiate_ids HID list to ignore_serial_bus_ids
and add the BCM4752 and LNV4752 HIDs, so that rfkill-gpio gets
a platform_device to bind to again; and so that a tty cdev for gpsd
gets created for these.
Fixes: e361d1f85855 ("ACPI / scan: Fix enumeration for special UART devices")
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/acpi/scan.c | 13 ++++++++++---
1 file changed, 10 insertions(+), 3 deletions(-)
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index de0533bd4e086..67a5ee2fedfd3 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -1577,6 +1577,7 @@ static bool acpi_device_enumeration_by_parent(struct acpi_device *device)
{
struct list_head resource_list;
bool is_serial_bus_slave = false;
+ static const struct acpi_device_id ignore_serial_bus_ids[] = {
/*
* These devices have multiple I2cSerialBus resources and an i2c-client
* must be instantiated for each, each with its own i2c_device_id.
@@ -1585,11 +1586,18 @@ static bool acpi_device_enumeration_by_parent(struct acpi_device *device)
* drivers/platform/x86/i2c-multi-instantiate.c driver, which knows
* which i2c_device_id to use for each resource.
*/
- static const struct acpi_device_id i2c_multi_instantiate_ids[] = {
{"BSG1160", },
{"BSG2150", },
{"INT33FE", },
{"INT3515", },
+ /*
+ * HIDs of device with an UartSerialBusV2 resource for which userspace
+ * expects a regular tty cdev to be created (instead of the in kernel
+ * serdev) and which have a kernel driver which expects a platform_dev
+ * such as the rfkill-gpio driver.
+ */
+ {"BCM4752", },
+ {"LNV4752", },
{}
};
@@ -1603,8 +1611,7 @@ static bool acpi_device_enumeration_by_parent(struct acpi_device *device)
fwnode_property_present(&device->fwnode, "baud")))
return true;
- /* Instantiate a pdev for the i2c-multi-instantiate drv to bind to */
- if (!acpi_match_device_ids(device, i2c_multi_instantiate_ids))
+ if (!acpi_match_device_ids(device, ignore_serial_bus_ids))
return false;
INIT_LIST_HEAD(&resource_list);
--
2.34.1
From: Xin Xiong <[email protected]>
[ Upstream commit d94a69cb2cfa77294921aae9afcfb866e723a2da ]
The issue takes place in one error path of clusterip_tg_check(). When
memcmp() returns nonzero, the function simply returns the error code,
forgetting to decrease the reference count of a clusterip_config
object, which is bumped earlier by clusterip_config_find_get(). This
may incur reference count leak.
Fix this issue by decrementing the refcount of the object in specific
error path.
Fixes: 06aa151ad1fc74 ("netfilter: ipt_CLUSTERIP: check MAC address when duplicate config is set")
Signed-off-by: Xin Xiong <[email protected]>
Signed-off-by: Xiyu Yang <[email protected]>
Signed-off-by: Xin Tan <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/ipv4/netfilter/ipt_CLUSTERIP.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/net/ipv4/netfilter/ipt_CLUSTERIP.c b/net/ipv4/netfilter/ipt_CLUSTERIP.c
index a8b980ad11d4e..1088564d4dbcb 100644
--- a/net/ipv4/netfilter/ipt_CLUSTERIP.c
+++ b/net/ipv4/netfilter/ipt_CLUSTERIP.c
@@ -505,8 +505,11 @@ static int clusterip_tg_check(const struct xt_tgchk_param *par)
if (IS_ERR(config))
return PTR_ERR(config);
}
- } else if (memcmp(&config->clustermac, &cipinfo->clustermac, ETH_ALEN))
+ } else if (memcmp(&config->clustermac, &cipinfo->clustermac, ETH_ALEN)) {
+ clusterip_config_entry_put(config);
+ clusterip_config_put(config);
return -EINVAL;
+ }
ret = nf_ct_netns_get(par->net, par->family);
if (ret < 0) {
--
2.34.1
From: Robert Marko <[email protected]>
[ Upstream commit effd42600b987c1e95f946b14fefc1c7639e7439 ]
CN9130 has one CP115 built in, which like the CP110 has 2 GPIO and 2 SPI
controllers built-in.
However, unlike the Armada 7k and 8k the SoC DTSI doesn't add the required
aliases as both the Orion SPI driver and MVEBU GPIO drivers require the
aliases to be present.
So add the required aliases for GPIO and SPI controllers.
Fixes: 6b8970bd8d7a ("arm64: dts: marvell: Add support for Marvell CN9130 SoC support")
Signed-off-by: Robert Marko <[email protected]>
Signed-off-by: Gregory CLEMENT <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/marvell/cn9130.dtsi | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/arm64/boot/dts/marvell/cn9130.dtsi b/arch/arm64/boot/dts/marvell/cn9130.dtsi
index a2b7e5ec979d3..71769ac7f0585 100644
--- a/arch/arm64/boot/dts/marvell/cn9130.dtsi
+++ b/arch/arm64/boot/dts/marvell/cn9130.dtsi
@@ -11,6 +11,13 @@
model = "Marvell Armada CN9130 SoC";
compatible = "marvell,cn9130", "marvell,armada-ap807-quad",
"marvell,armada-ap807";
+
+ aliases {
+ gpio1 = &cp0_gpio1;
+ gpio2 = &cp0_gpio2;
+ spi1 = &cp0_spi0;
+ spi2 = &cp0_spi1;
+ };
};
/*
--
2.34.1
From: Takashi Iwai <[email protected]>
[ Upstream commit 06764dc931848c3a9bc01a63bbf76a605408bb54 ]
snd_ctl_remove() has to be called with card->controls_rwsem held (when
called after the card instantiation). This patch add the missing
rwsem calls around it.
Fixes: 9058cbe1eed2 ("ALSA: jack: implement kctl creating for jack devices")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/core/jack.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/sound/core/jack.c b/sound/core/jack.c
index d6502dff247a8..dc2e06ae24149 100644
--- a/sound/core/jack.c
+++ b/sound/core/jack.c
@@ -54,10 +54,13 @@ static int snd_jack_dev_free(struct snd_device *device)
struct snd_card *card = device->card;
struct snd_jack_kctl *jack_kctl, *tmp_jack_kctl;
+ down_write(&card->controls_rwsem);
list_for_each_entry_safe(jack_kctl, tmp_jack_kctl, &jack->kctl_list, list) {
list_del_init(&jack_kctl->list);
snd_ctl_remove(card, jack_kctl->kctl);
}
+ up_write(&card->controls_rwsem);
+
if (jack->private_free)
jack->private_free(jack);
--
2.34.1
From: Zizhuang Deng <[email protected]>
[ Upstream commit dd827abe296fe4249b2f8c9b95f72f814ea8348c ]
Add the return value check of kcalloc() to avoid potential
NULL ptr dereference.
Fixes: a8ea8bdd9df9 ("lib/mpi: Extend the MPI library")
Signed-off-by: Zizhuang Deng <[email protected]>
Reviewed-by: Tianjia Zhang <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
lib/mpi/mpi-mod.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/lib/mpi/mpi-mod.c b/lib/mpi/mpi-mod.c
index 47bc59edd4ff9..54fcc01564d9d 100644
--- a/lib/mpi/mpi-mod.c
+++ b/lib/mpi/mpi-mod.c
@@ -40,6 +40,8 @@ mpi_barrett_t mpi_barrett_init(MPI m, int copy)
mpi_normalize(m);
ctx = kcalloc(1, sizeof(*ctx), GFP_KERNEL);
+ if (!ctx)
+ return NULL;
if (copy) {
ctx->m = mpi_copy(m);
--
2.34.1
From: Sergey Shtylyov <[email protected]>
[ Upstream commit 8fc9a77bc64e1f23d07953439817d8402ac9706f ]
The driver neglects to check the result of platform_get_irq()'s call and
blithely passes the negative error codes to devm_request_threaded_irq()
(which takes *unsigned* IRQ #), causing it to fail with -EINVAL, overriding
an original error code. Stop calling devm_request_threaded_irq() with the
invalid IRQ #s.
Fixes: ed80a13bb4c4 ("mmc: meson-mx-sdio: Add a driver for the Amlogic Meson8 and Meson8b SoC")
Signed-off-by: Sergey Shtylyov <[email protected]>
Reviewed-by: Martin Blumenstingl <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mmc/host/meson-mx-sdio.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/mmc/host/meson-mx-sdio.c b/drivers/mmc/host/meson-mx-sdio.c
index 1c5299cd0cbe1..264aae2a2b0cf 100644
--- a/drivers/mmc/host/meson-mx-sdio.c
+++ b/drivers/mmc/host/meson-mx-sdio.c
@@ -663,6 +663,11 @@ static int meson_mx_mmc_probe(struct platform_device *pdev)
}
irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ ret = irq;
+ goto error_free_mmc;
+ }
+
ret = devm_request_threaded_irq(host->controller_dev, irq,
meson_mx_mmc_irq,
meson_mx_mmc_irq_thread, IRQF_ONESHOT,
--
2.34.1
From: Miaoqian Lin <[email protected]>
[ Upstream commit b52fe2dbb3e655eb1483000adfab68a219549e13 ]
Since the acpi_create_platform_device() function may return error
pointers, dwc3_qcom_create_urs_usb_platdev() function may return error
pointers too. Using IS_ERR_OR_NULL() to check the return value to fix this.
Fixes: c25c210f590e ("usb: dwc3: qcom: add URS Host support for sdm845 ACPI boot")
Signed-off-by: Miaoqian Lin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/dwc3/dwc3-qcom.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
index 2a29e2f681fe6..504f8af4d0f80 100644
--- a/drivers/usb/dwc3/dwc3-qcom.c
+++ b/drivers/usb/dwc3/dwc3-qcom.c
@@ -764,9 +764,12 @@ static int dwc3_qcom_probe(struct platform_device *pdev)
if (qcom->acpi_pdata->is_urs) {
qcom->urs_usb = dwc3_qcom_create_urs_usb_platdev(dev);
- if (!qcom->urs_usb) {
+ if (IS_ERR_OR_NULL(qcom->urs_usb)) {
dev_err(dev, "failed to create URS USB platdev\n");
- return -ENODEV;
+ if (!qcom->urs_usb)
+ return -ENODEV;
+ else
+ return PTR_ERR(qcom->urs_usb);
}
}
}
--
2.34.1
From: Zhou Qingyang <[email protected]>
[ Upstream commit 977d2e7c63c3d04d07ba340b39987742e3241554 ]
In nonstatic_find_mem_region(), pcmcia_make_resource() is assigned to
res and used in pci_bus_alloc_resource(). There a dereference of res
in pci_bus_alloc_resource(), which could lead to a NULL pointer
dereference on failure of pcmcia_make_resource().
Fix this bug by adding a check of res.
This bug was found by a static analyzer. The analysis employs
differential checking to identify inconsistent security operations
(e.g., checks or kfrees) between two code paths and confirms that the
inconsistent operations are not recovered in the current function or
the callers, so they constitute bugs.
Note that, as a bug found by static analysis, it can be a false
positive or hard to trigger. Multiple researchers have cross-reviewed
the bug.
Builds with CONFIG_PCCARD_NONSTATIC=y show no new warnings,
and our static analyzer no longer warns about this code.
Fixes: 49b1153adfe1 ("pcmcia: move all pcmcia_resource_ops providers into one module")
Signed-off-by: Zhou Qingyang <[email protected]>
Signed-off-by: Dominik Brodowski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pcmcia/rsrc_nonstatic.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/pcmcia/rsrc_nonstatic.c b/drivers/pcmcia/rsrc_nonstatic.c
index 4c70e8ffe04ea..69a6e9a5d6d26 100644
--- a/drivers/pcmcia/rsrc_nonstatic.c
+++ b/drivers/pcmcia/rsrc_nonstatic.c
@@ -812,6 +812,9 @@ static struct resource *nonstatic_find_mem_region(u_long base, u_long num,
unsigned long min, max;
int ret, i, j;
+ if (!res)
+ return NULL;
+
low = low || !(s->features & SS_CAP_PAGE_REGS);
data.mask = align - 1;
--
2.34.1
From: Zhou Qingyang <[email protected]>
[ Upstream commit ca0fe0d7c35c97528bdf621fdca75f13157c27af ]
In __nonstatic_find_io_region(), pcmcia_make_resource() is assigned to
res and used in pci_bus_alloc_resource(). There is a dereference of res
in pci_bus_alloc_resource(), which could lead to a NULL pointer
dereference on failure of pcmcia_make_resource().
Fix this bug by adding a check of res.
This bug was found by a static analyzer. The analysis employs
differential checking to identify inconsistent security operations
(e.g., checks or kfrees) between two code paths and confirms that the
inconsistent operations are not recovered in the current function or
the callers, so they constitute bugs.
Note that, as a bug found by static analysis, it can be a false
positive or hard to trigger. Multiple researchers have cross-reviewed
the bug.
Builds with CONFIG_PCCARD_NONSTATIC=y show no new warnings,
and our static analyzer no longer warns about this code.
Fixes: 49b1153adfe1 ("pcmcia: move all pcmcia_resource_ops providers into one module")
Signed-off-by: Zhou Qingyang <[email protected]>
[[email protected]: Fix typo in commit message]
Signed-off-by: Dominik Brodowski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pcmcia/rsrc_nonstatic.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/pcmcia/rsrc_nonstatic.c b/drivers/pcmcia/rsrc_nonstatic.c
index 3b05760e69d62..4c70e8ffe04ea 100644
--- a/drivers/pcmcia/rsrc_nonstatic.c
+++ b/drivers/pcmcia/rsrc_nonstatic.c
@@ -690,6 +690,9 @@ static struct resource *__nonstatic_find_io_region(struct pcmcia_socket *s,
unsigned long min = base;
int ret;
+ if (!res)
+ return NULL;
+
data.mask = align - 1;
data.offset = base & data.mask;
data.map = &s_data->io_db;
--
2.34.1
From: Takashi Iwai <[email protected]>
[ Upstream commit 5471e9762e1af4b7df057a96bfd46cc250979b88 ]
snd_ctl_remove() has to be called with card->controls_rwsem held (when
called after the card instantiation). This patch add the missing
rwsem calls around it.
Fixes: a8ff48cb7083 ("ALSA: pcm: Free chmap at PCM free callback, too")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/core/pcm.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/sound/core/pcm.c b/sound/core/pcm.c
index 41cbdac5b1cfa..a8ae5928decda 100644
--- a/sound/core/pcm.c
+++ b/sound/core/pcm.c
@@ -810,7 +810,11 @@ EXPORT_SYMBOL(snd_pcm_new_internal);
static void free_chmap(struct snd_pcm_str *pstr)
{
if (pstr->chmap_kctl) {
- snd_ctl_remove(pstr->pcm->card, pstr->chmap_kctl);
+ struct snd_card *card = pstr->pcm->card;
+
+ down_write(&card->controls_rwsem);
+ snd_ctl_remove(card, pstr->chmap_kctl);
+ up_write(&card->controls_rwsem);
pstr->chmap_kctl = NULL;
}
}
--
2.34.1
From: Kees Cook <[email protected]>
[ Upstream commit f5912cc19acd7c24b2dbf65a6340bf194244f085 ]
Using MKWORD() on a byte-sized variable results in OOB read. Expand the
size of the reserved area so both MKWORD and MKBYTE continue to work
without overflow. Silences this warning on a -Warray-bounds build:
drivers/char/mwave/3780i.h:346:22: error: array subscript 'short unsigned int[0]' is partly outside array bounds of 'DSP_ISA_SLAVE_CONTROL[1]' [-Werror=array-bounds]
346 | #define MKWORD(var) (*((unsigned short *)(&var)))
| ~^~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/char/mwave/3780i.h:356:40: note: in definition of macro 'OutWordDsp'
356 | #define OutWordDsp(index,value) outw(value,usDspBaseIO+index)
| ^~~~~
drivers/char/mwave/3780i.c:373:41: note: in expansion of macro 'MKWORD'
373 | OutWordDsp(DSP_IsaSlaveControl, MKWORD(rSlaveControl));
| ^~~~~~
drivers/char/mwave/3780i.c:358:31: note: while referencing 'rSlaveControl'
358 | DSP_ISA_SLAVE_CONTROL rSlaveControl;
| ^~~~~~~~~~~~~
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kees Cook <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/char/mwave/3780i.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/char/mwave/3780i.h b/drivers/char/mwave/3780i.h
index 9ccb6b270b071..95164246afd1a 100644
--- a/drivers/char/mwave/3780i.h
+++ b/drivers/char/mwave/3780i.h
@@ -68,7 +68,7 @@ typedef struct {
unsigned char ClockControl:1; /* RW: Clock control: 0=normal, 1=stop 3780i clocks */
unsigned char SoftReset:1; /* RW: Soft reset 0=normal, 1=soft reset active */
unsigned char ConfigMode:1; /* RW: Configuration mode, 0=normal, 1=config mode */
- unsigned char Reserved:5; /* 0: Reserved */
+ unsigned short Reserved:13; /* 0: Reserved */
} DSP_ISA_SLAVE_CONTROL;
--
2.34.1
From: Miaoqian Lin <[email protected]>
[ Upstream commit 6845667146a28c09b5dfc401c1ad112374087944 ]
The function devm_gpiod_get_index() return error pointers on error.
Thus devm_gpiod_get_index_optional() could return NULL and error pointers.
The same as devm_gpiod_get_optional() function. Using IS_ERR_OR_NULL()
check to catch error pointers.
Fixes: 77131dfe ("Bluetooth: hci_qca: Replace devm_gpiod_get() with devm_gpiod_get_optional()")
Signed-off-by: Miaoqian Lin <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/bluetooth/hci_qca.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index 4f8a32601c1b6..dc7ee5dd2eeca 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -1990,7 +1990,7 @@ static int qca_serdev_probe(struct serdev_device *serdev)
qcadev->bt_en = devm_gpiod_get_optional(&serdev->dev, "enable",
GPIOD_OUT_LOW);
- if (!qcadev->bt_en) {
+ if (IS_ERR_OR_NULL(qcadev->bt_en)) {
dev_warn(&serdev->dev, "failed to acquire enable gpio\n");
power_ctrl_enabled = false;
}
--
2.34.1
From: Adam Ford <[email protected]>
[ Upstream commit 570727e9acfac1c2330a01dd5e1272e9c3acec08 ]
When attempting to use sys_pll1_80m as the parent for clko1, the
system hangs. This is due to the fact that the source select
for sys_pll1_80m was incorrectly pointing to m7_alt_pll_clk, which
doesn't yet exist.
According to Rev 3 of the TRM, The imx8mn_clko1_sels also incorrectly
references an osc_27m which does not exist, nor does an entry for
source select bits 010b. Fix both by inserting a dummy clock into
the missing space in the table and renaming the incorrectly name clock
with dummy.
Fixes: 96d6392b54db ("clk: imx: Add support for i.MX8MN clock driver")
Signed-off-by: Adam Ford <[email protected]>
Reviewed-by: Fabio Estevam <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Abel Vesa <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/imx/clk-imx8mn.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/clk/imx/clk-imx8mn.c b/drivers/clk/imx/clk-imx8mn.c
index 33a7ddc23cd24..db122d94db583 100644
--- a/drivers/clk/imx/clk-imx8mn.c
+++ b/drivers/clk/imx/clk-imx8mn.c
@@ -274,9 +274,9 @@ static const char * const imx8mn_pdm_sels[] = {"osc_24m", "sys_pll2_100m", "audi
static const char * const imx8mn_dram_core_sels[] = {"dram_pll_out", "dram_alt_root", };
-static const char * const imx8mn_clko1_sels[] = {"osc_24m", "sys_pll1_800m", "osc_27m",
- "sys_pll1_200m", "audio_pll2_out", "vpu_pll",
- "sys_pll1_80m", };
+static const char * const imx8mn_clko1_sels[] = {"osc_24m", "sys_pll1_800m", "dummy",
+ "sys_pll1_200m", "audio_pll2_out", "sys_pll2_500m",
+ "dummy", "sys_pll1_80m", };
static const char * const imx8mn_clko2_sels[] = {"osc_24m", "sys_pll2_200m", "sys_pll1_400m",
"sys_pll2_166m", "sys_pll3_out", "audio_pll1_out",
"video_pll1_out", "osc_32k", };
--
2.34.1
From: Bixuan Cui <[email protected]>
[ Upstream commit 8e7daf318d97f25e18b2fc7eb5909e34cd903575 ]
Fix compile error when OSS_DEBUG is enabled:
sound/core/oss/pcm_oss.c: In function 'snd_pcm_oss_set_trigger':
sound/core/oss/pcm_oss.c:2055:10: error: 'substream' undeclared (first
use in this function); did you mean 'csubstream'?
pcm_dbg(substream->pcm, "pcm_oss: trigger = 0x%x\n", trigger);
^
Fixes: 61efcee8608c ("ALSA: oss: Use standard printk helpers")
Signed-off-by: Bixuan Cui <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/core/oss/pcm_oss.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sound/core/oss/pcm_oss.c b/sound/core/oss/pcm_oss.c
index 77727a69c3c4e..d79febeebf0c5 100644
--- a/sound/core/oss/pcm_oss.c
+++ b/sound/core/oss/pcm_oss.c
@@ -2056,7 +2056,7 @@ static int snd_pcm_oss_set_trigger(struct snd_pcm_oss_file *pcm_oss_file, int tr
int err, cmd;
#ifdef OSS_DEBUG
- pcm_dbg(substream->pcm, "pcm_oss: trigger = 0x%x\n", trigger);
+ pr_debug("pcm_oss: trigger = 0x%x\n", trigger);
#endif
psubstream = pcm_oss_file->streams[SNDRV_PCM_STREAM_PLAYBACK];
--
2.34.1
From: Niklas Söderlund <[email protected]>
[ Upstream commit 49bcb1506f2e095262c01bda7fd1c0db524c91e2 ]
When converting the thermal-zones bindings to yaml the definition of the
contribution property changed. The intention is the same, an integer
value expressing a ratio of a sum on how much cooling is provided by the
device to the zone. But after the conversion the integer value is
limited to the range 0 to 100 and expressed as a percentage.
This is problematic for two reasons.
- This do not match how the binding is used. Out of the 18 files that
make use of the property only two (ste-dbx5x0.dtsi and
ste-hrefv60plus.dtsi) sets it at a value that satisfy the binding,
100. The remaining 16 files set the value higher and fail to validate.
- Expressing the value as a percentage instead of a ratio of the sum is
confusing as there is nothing to enforce the sum in the zone is not
greater then 100.
This patch restore the pre yaml conversion description and removes the
value limitation allowing the usage of the bindings to validate.
Fixes: 1202a442a31fd2e5 ("dt-bindings: thermal: Add yaml bindings for thermal zones")
Reported-by: Kieran Bingham <[email protected]>
Signed-off-by: Niklas Söderlund <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../devicetree/bindings/thermal/thermal-zones.yaml | 9 ++++-----
1 file changed, 4 insertions(+), 5 deletions(-)
diff --git a/Documentation/devicetree/bindings/thermal/thermal-zones.yaml b/Documentation/devicetree/bindings/thermal/thermal-zones.yaml
index 164f71598c595..1b3954aa71c15 100644
--- a/Documentation/devicetree/bindings/thermal/thermal-zones.yaml
+++ b/Documentation/devicetree/bindings/thermal/thermal-zones.yaml
@@ -199,12 +199,11 @@ patternProperties:
contribution:
$ref: /schemas/types.yaml#/definitions/uint32
- minimum: 0
- maximum: 100
description:
- The percentage contribution of the cooling devices at the
- specific trip temperature referenced in this map
- to this thermal zone
+ The cooling contribution to the thermal zone of the referred
+ cooling device at the referred trip point. The contribution is
+ a ratio of the sum of all cooling contributions within a
+ thermal zone.
required:
- trip
--
2.34.1
From: Kamal Heib <[email protected]>
[ Upstream commit e375b9c92985e409c4bb95dd43d34915ea7f5e28 ]
The API for ib_query_qp requires the driver to set cur_qp_state on return,
add the missing set.
Fixes: 67bbc05512d8 ("RDMA/cxgb4: Add query_qp support")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Kamal Heib <[email protected]>
Reviewed-by: Leon Romanovsky <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/hw/cxgb4/qp.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/infiniband/hw/cxgb4/qp.c b/drivers/infiniband/hw/cxgb4/qp.c
index 861e19fdfeb46..12e5461581cb4 100644
--- a/drivers/infiniband/hw/cxgb4/qp.c
+++ b/drivers/infiniband/hw/cxgb4/qp.c
@@ -2469,6 +2469,7 @@ int c4iw_ib_query_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr,
memset(attr, 0, sizeof(*attr));
memset(init_attr, 0, sizeof(*init_attr));
attr->qp_state = to_ib_qp_state(qhp->attr.state);
+ attr->cur_qp_state = to_ib_qp_state(qhp->attr.state);
init_attr->cap.max_send_wr = qhp->attr.sq_num_entries;
init_attr->cap.max_recv_wr = qhp->attr.rq_num_entries;
init_attr->cap.max_send_sge = qhp->attr.sq_max_sges;
--
2.34.1
From: Nicholas Piggin <[email protected]>
[ Upstream commit 156b5371a9c2482a9ad23ec82d1a4f89a3ab430d ]
This is required in order to allow more significant differences between
NMI type interrupt handlers and regular asynchronous handlers.
Signed-off-by: Nicholas Piggin <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/kernel/traps.c | 31 +++++++++++++++++++++++++++-
arch/powerpc/perf/core-book3s.c | 35 ++------------------------------
arch/powerpc/perf/core-fsl-emb.c | 25 -----------------------
3 files changed, 32 insertions(+), 59 deletions(-)
diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index 77dffea3d5373..069d451240fa4 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -1922,11 +1922,40 @@ void vsx_unavailable_tm(struct pt_regs *regs)
}
#endif /* CONFIG_PPC_TRANSACTIONAL_MEM */
-void performance_monitor_exception(struct pt_regs *regs)
+static void performance_monitor_exception_nmi(struct pt_regs *regs)
+{
+ nmi_enter();
+
+ __this_cpu_inc(irq_stat.pmu_irqs);
+
+ perf_irq(regs);
+
+ nmi_exit();
+}
+
+static void performance_monitor_exception_async(struct pt_regs *regs)
{
+ irq_enter();
+
__this_cpu_inc(irq_stat.pmu_irqs);
perf_irq(regs);
+
+ irq_exit();
+}
+
+void performance_monitor_exception(struct pt_regs *regs)
+{
+ /*
+ * On 64-bit, if perf interrupts hit in a local_irq_disable
+ * (soft-masked) region, we consider them as NMIs. This is required to
+ * prevent hash faults on user addresses when reading callchains (and
+ * looks better from an irq tracing perspective).
+ */
+ if (IS_ENABLED(CONFIG_PPC64) && unlikely(arch_irq_disabled_regs(regs)))
+ performance_monitor_exception_nmi(regs);
+ else
+ performance_monitor_exception_async(regs);
}
#ifdef CONFIG_PPC_ADV_DEBUG_REGS
diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c
index 7bda7499d0401..b5cac8ddcf5bc 100644
--- a/arch/powerpc/perf/core-book3s.c
+++ b/arch/powerpc/perf/core-book3s.c
@@ -110,10 +110,6 @@ static inline void perf_read_regs(struct pt_regs *regs)
{
regs->result = 0;
}
-static inline int perf_intr_is_nmi(struct pt_regs *regs)
-{
- return 0;
-}
static inline int siar_valid(struct pt_regs *regs)
{
@@ -332,15 +328,6 @@ static inline void perf_read_regs(struct pt_regs *regs)
regs->result = use_siar;
}
-/*
- * If interrupts were soft-disabled when a PMU interrupt occurs, treat
- * it as an NMI.
- */
-static inline int perf_intr_is_nmi(struct pt_regs *regs)
-{
- return (regs->softe & IRQS_DISABLED);
-}
-
/*
* On processors like P7+ that have the SIAR-Valid bit, marked instructions
* must be sampled only if the SIAR-valid bit is set.
@@ -2254,7 +2241,6 @@ static void __perf_event_interrupt(struct pt_regs *regs)
struct perf_event *event;
unsigned long val[8];
int found, active;
- int nmi;
if (cpuhw->n_limited)
freeze_limited_counters(cpuhw, mfspr(SPRN_PMC5),
@@ -2262,18 +2248,6 @@ static void __perf_event_interrupt(struct pt_regs *regs)
perf_read_regs(regs);
- /*
- * If perf interrupts hit in a local_irq_disable (soft-masked) region,
- * we consider them as NMIs. This is required to prevent hash faults on
- * user addresses when reading callchains. See the NMI test in
- * do_hash_page.
- */
- nmi = perf_intr_is_nmi(regs);
- if (nmi)
- nmi_enter();
- else
- irq_enter();
-
/* Read all the PMCs since we'll need them a bunch of times */
for (i = 0; i < ppmu->n_counter; ++i)
val[i] = read_pmc(i + 1);
@@ -2319,8 +2293,8 @@ static void __perf_event_interrupt(struct pt_regs *regs)
}
}
}
- if (!found && !nmi && printk_ratelimit())
- printk(KERN_WARNING "Can't find PMC that caused IRQ\n");
+ if (unlikely(!found) && !arch_irq_disabled_regs(regs))
+ printk_ratelimited(KERN_WARNING "Can't find PMC that caused IRQ\n");
/*
* Reset MMCR0 to its normal value. This will set PMXE and
@@ -2330,11 +2304,6 @@ static void __perf_event_interrupt(struct pt_regs *regs)
* we get back out of this interrupt.
*/
write_mmcr0(cpuhw, cpuhw->mmcr.mmcr0);
-
- if (nmi)
- nmi_exit();
- else
- irq_exit();
}
static void perf_event_interrupt(struct pt_regs *regs)
diff --git a/arch/powerpc/perf/core-fsl-emb.c b/arch/powerpc/perf/core-fsl-emb.c
index e0e7e276bfd25..ee721f420a7ba 100644
--- a/arch/powerpc/perf/core-fsl-emb.c
+++ b/arch/powerpc/perf/core-fsl-emb.c
@@ -31,19 +31,6 @@ static atomic_t num_events;
/* Used to avoid races in calling reserve/release_pmc_hardware */
static DEFINE_MUTEX(pmc_reserve_mutex);
-/*
- * If interrupts were soft-disabled when a PMU interrupt occurs, treat
- * it as an NMI.
- */
-static inline int perf_intr_is_nmi(struct pt_regs *regs)
-{
-#ifdef __powerpc64__
- return (regs->softe & IRQS_DISABLED);
-#else
- return 0;
-#endif
-}
-
static void perf_event_interrupt(struct pt_regs *regs);
/*
@@ -659,13 +646,6 @@ static void perf_event_interrupt(struct pt_regs *regs)
struct perf_event *event;
unsigned long val;
int found = 0;
- int nmi;
-
- nmi = perf_intr_is_nmi(regs);
- if (nmi)
- nmi_enter();
- else
- irq_enter();
for (i = 0; i < ppmu->n_counter; ++i) {
event = cpuhw->event[i];
@@ -690,11 +670,6 @@ static void perf_event_interrupt(struct pt_regs *regs)
mtmsr(mfmsr() | MSR_PMM);
mtpmr(PMRN_PMGC0, PMGC0_PMIE | PMGC0_FCECE);
isync();
-
- if (nmi)
- nmi_exit();
- else
- irq_exit();
}
void hw_perf_event_setup(int cpu)
--
2.34.1
From: Jordan Niethe <[email protected]>
[ Upstream commit 344fbab991a568dc33ad90711b489d870e18d26d ]
The only thing keeping the cpu_setup() and cpu_restore() functions
used in the cputable entries for Power7, Power8, Power9 and Power10 in
assembly was cpu_restore() being called before there was a stack in
generic_secondary_smp_init(). Commit ("powerpc/64: Set up a kernel
stack for secondaries before cpu_restore()") means that it is now
possible to use C.
Rewrite the functions in C so they are a little bit easier to read.
This is not changing their functionality.
Signed-off-by: Jordan Niethe <[email protected]>
[mpe: Tweak copyright and authorship notes]
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/include/asm/cpu_setup_power.h | 12 +
arch/powerpc/kernel/cpu_setup_power.S | 252 -------------------
arch/powerpc/kernel/cpu_setup_power.c | 271 +++++++++++++++++++++
arch/powerpc/kernel/cputable.c | 12 +-
4 files changed, 287 insertions(+), 260 deletions(-)
create mode 100644 arch/powerpc/include/asm/cpu_setup_power.h
delete mode 100644 arch/powerpc/kernel/cpu_setup_power.S
create mode 100644 arch/powerpc/kernel/cpu_setup_power.c
diff --git a/arch/powerpc/include/asm/cpu_setup_power.h b/arch/powerpc/include/asm/cpu_setup_power.h
new file mode 100644
index 0000000000000..24be9131f8032
--- /dev/null
+++ b/arch/powerpc/include/asm/cpu_setup_power.h
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (C) 2020 IBM Corporation
+ */
+void __setup_cpu_power7(unsigned long offset, struct cpu_spec *spec);
+void __restore_cpu_power7(void);
+void __setup_cpu_power8(unsigned long offset, struct cpu_spec *spec);
+void __restore_cpu_power8(void);
+void __setup_cpu_power9(unsigned long offset, struct cpu_spec *spec);
+void __restore_cpu_power9(void);
+void __setup_cpu_power10(unsigned long offset, struct cpu_spec *spec);
+void __restore_cpu_power10(void);
diff --git a/arch/powerpc/kernel/cpu_setup_power.S b/arch/powerpc/kernel/cpu_setup_power.S
deleted file mode 100644
index 704e8b9501eee..0000000000000
--- a/arch/powerpc/kernel/cpu_setup_power.S
+++ /dev/null
@@ -1,252 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * This file contains low level CPU setup functions.
- * Copyright (C) 2003 Benjamin Herrenschmidt ([email protected])
- */
-
-#include <asm/processor.h>
-#include <asm/page.h>
-#include <asm/cputable.h>
-#include <asm/ppc_asm.h>
-#include <asm/asm-offsets.h>
-#include <asm/cache.h>
-#include <asm/book3s/64/mmu-hash.h>
-
-/* Entry: r3 = crap, r4 = ptr to cputable entry
- *
- * Note that we can be called twice for pseudo-PVRs
- */
-_GLOBAL(__setup_cpu_power7)
- mflr r11
- bl __init_hvmode_206
- mtlr r11
- beqlr
- li r0,0
- mtspr SPRN_LPID,r0
- LOAD_REG_IMMEDIATE(r0, PCR_MASK)
- mtspr SPRN_PCR,r0
- mfspr r3,SPRN_LPCR
- li r4,(LPCR_LPES1 >> LPCR_LPES_SH)
- bl __init_LPCR_ISA206
- mtlr r11
- blr
-
-_GLOBAL(__restore_cpu_power7)
- mflr r11
- mfmsr r3
- rldicl. r0,r3,4,63
- beqlr
- li r0,0
- mtspr SPRN_LPID,r0
- LOAD_REG_IMMEDIATE(r0, PCR_MASK)
- mtspr SPRN_PCR,r0
- mfspr r3,SPRN_LPCR
- li r4,(LPCR_LPES1 >> LPCR_LPES_SH)
- bl __init_LPCR_ISA206
- mtlr r11
- blr
-
-_GLOBAL(__setup_cpu_power8)
- mflr r11
- bl __init_FSCR
- bl __init_PMU
- bl __init_PMU_ISA207
- bl __init_hvmode_206
- mtlr r11
- beqlr
- li r0,0
- mtspr SPRN_LPID,r0
- LOAD_REG_IMMEDIATE(r0, PCR_MASK)
- mtspr SPRN_PCR,r0
- mfspr r3,SPRN_LPCR
- ori r3, r3, LPCR_PECEDH
- li r4,0 /* LPES = 0 */
- bl __init_LPCR_ISA206
- bl __init_HFSCR
- bl __init_PMU_HV
- bl __init_PMU_HV_ISA207
- mtlr r11
- blr
-
-_GLOBAL(__restore_cpu_power8)
- mflr r11
- bl __init_FSCR
- bl __init_PMU
- bl __init_PMU_ISA207
- mfmsr r3
- rldicl. r0,r3,4,63
- mtlr r11
- beqlr
- li r0,0
- mtspr SPRN_LPID,r0
- LOAD_REG_IMMEDIATE(r0, PCR_MASK)
- mtspr SPRN_PCR,r0
- mfspr r3,SPRN_LPCR
- ori r3, r3, LPCR_PECEDH
- li r4,0 /* LPES = 0 */
- bl __init_LPCR_ISA206
- bl __init_HFSCR
- bl __init_PMU_HV
- bl __init_PMU_HV_ISA207
- mtlr r11
- blr
-
-_GLOBAL(__setup_cpu_power10)
- mflr r11
- bl __init_FSCR_power10
- bl __init_PMU
- bl __init_PMU_ISA31
- b 1f
-
-_GLOBAL(__setup_cpu_power9)
- mflr r11
- bl __init_FSCR_power9
- bl __init_PMU
-1: bl __init_hvmode_206
- mtlr r11
- beqlr
- li r0,0
- mtspr SPRN_PSSCR,r0
- mtspr SPRN_LPID,r0
- mtspr SPRN_PID,r0
- LOAD_REG_IMMEDIATE(r0, PCR_MASK)
- mtspr SPRN_PCR,r0
- mfspr r3,SPRN_LPCR
- LOAD_REG_IMMEDIATE(r4, LPCR_PECEDH | LPCR_PECE_HVEE | LPCR_HVICE | LPCR_HEIC)
- or r3, r3, r4
- LOAD_REG_IMMEDIATE(r4, LPCR_UPRT | LPCR_HR)
- andc r3, r3, r4
- li r4,0 /* LPES = 0 */
- bl __init_LPCR_ISA300
- bl __init_HFSCR
- bl __init_PMU_HV
- mtlr r11
- blr
-
-_GLOBAL(__restore_cpu_power10)
- mflr r11
- bl __init_FSCR_power10
- bl __init_PMU
- bl __init_PMU_ISA31
- b 1f
-
-_GLOBAL(__restore_cpu_power9)
- mflr r11
- bl __init_FSCR_power9
- bl __init_PMU
-1: mfmsr r3
- rldicl. r0,r3,4,63
- mtlr r11
- beqlr
- li r0,0
- mtspr SPRN_PSSCR,r0
- mtspr SPRN_LPID,r0
- mtspr SPRN_PID,r0
- LOAD_REG_IMMEDIATE(r0, PCR_MASK)
- mtspr SPRN_PCR,r0
- mfspr r3,SPRN_LPCR
- LOAD_REG_IMMEDIATE(r4, LPCR_PECEDH | LPCR_PECE_HVEE | LPCR_HVICE | LPCR_HEIC)
- or r3, r3, r4
- LOAD_REG_IMMEDIATE(r4, LPCR_UPRT | LPCR_HR)
- andc r3, r3, r4
- li r4,0 /* LPES = 0 */
- bl __init_LPCR_ISA300
- bl __init_HFSCR
- bl __init_PMU_HV
- mtlr r11
- blr
-
-__init_hvmode_206:
- /* Disable CPU_FTR_HVMODE and exit if MSR:HV is not set */
- mfmsr r3
- rldicl. r0,r3,4,63
- bnelr
- ld r5,CPU_SPEC_FEATURES(r4)
- LOAD_REG_IMMEDIATE(r6,CPU_FTR_HVMODE | CPU_FTR_P9_TM_HV_ASSIST)
- andc r5,r5,r6
- std r5,CPU_SPEC_FEATURES(r4)
- blr
-
-__init_LPCR_ISA206:
- /* Setup a sane LPCR:
- * Called with initial LPCR in R3 and desired LPES 2-bit value in R4
- *
- * LPES = 0b01 (HSRR0/1 used for 0x500)
- * PECE = 0b111
- * DPFD = 4
- * HDICE = 0
- * VC = 0b100 (VPM0=1, VPM1=0, ISL=0)
- * VRMASD = 0b10000 (L=1, LP=00)
- *
- * Other bits untouched for now
- */
- li r5,0x10
- rldimi r3,r5, LPCR_VRMASD_SH, 64-LPCR_VRMASD_SH-5
-
- /* POWER9 has no VRMASD */
-__init_LPCR_ISA300:
- rldimi r3,r4, LPCR_LPES_SH, 64-LPCR_LPES_SH-2
- ori r3,r3,(LPCR_PECE0|LPCR_PECE1|LPCR_PECE2)
- li r5,4
- rldimi r3,r5, LPCR_DPFD_SH, 64-LPCR_DPFD_SH-3
- clrrdi r3,r3,1 /* clear HDICE */
- li r5,4
- rldimi r3,r5, LPCR_VC_SH, 0
- mtspr SPRN_LPCR,r3
- isync
- blr
-
-__init_FSCR_power10:
- mfspr r3, SPRN_FSCR
- ori r3, r3, FSCR_PREFIX
- mtspr SPRN_FSCR, r3
- // fall through
-
-__init_FSCR_power9:
- mfspr r3, SPRN_FSCR
- ori r3, r3, FSCR_SCV
- mtspr SPRN_FSCR, r3
- // fall through
-
-__init_FSCR:
- mfspr r3,SPRN_FSCR
- ori r3,r3,FSCR_TAR|FSCR_EBB
- mtspr SPRN_FSCR,r3
- blr
-
-__init_HFSCR:
- mfspr r3,SPRN_HFSCR
- ori r3,r3,HFSCR_TAR|HFSCR_TM|HFSCR_BHRB|HFSCR_PM|\
- HFSCR_DSCR|HFSCR_VECVSX|HFSCR_FP|HFSCR_EBB|HFSCR_MSGP
- mtspr SPRN_HFSCR,r3
- blr
-
-__init_PMU_HV:
- li r5,0
- mtspr SPRN_MMCRC,r5
- blr
-
-__init_PMU_HV_ISA207:
- li r5,0
- mtspr SPRN_MMCRH,r5
- blr
-
-__init_PMU:
- li r5,0
- mtspr SPRN_MMCRA,r5
- mtspr SPRN_MMCR0,r5
- mtspr SPRN_MMCR1,r5
- mtspr SPRN_MMCR2,r5
- blr
-
-__init_PMU_ISA207:
- li r5,0
- mtspr SPRN_MMCRS,r5
- blr
-
-__init_PMU_ISA31:
- li r5,0
- mtspr SPRN_MMCR3,r5
- LOAD_REG_IMMEDIATE(r5, MMCRA_BHRB_DISABLE)
- mtspr SPRN_MMCRA,r5
- blr
diff --git a/arch/powerpc/kernel/cpu_setup_power.c b/arch/powerpc/kernel/cpu_setup_power.c
new file mode 100644
index 0000000000000..0c2191ee139ec
--- /dev/null
+++ b/arch/powerpc/kernel/cpu_setup_power.c
@@ -0,0 +1,271 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2020, Jordan Niethe, IBM Corporation.
+ *
+ * This file contains low level CPU setup functions.
+ * Originally written in assembly by Benjamin Herrenschmidt & various other
+ * authors.
+ */
+
+#include <asm/reg.h>
+#include <asm/synch.h>
+#include <linux/bitops.h>
+#include <asm/cputable.h>
+#include <asm/cpu_setup_power.h>
+
+/* Disable CPU_FTR_HVMODE and return false if MSR:HV is not set */
+static bool init_hvmode_206(struct cpu_spec *t)
+{
+ u64 msr;
+
+ msr = mfmsr();
+ if (msr & MSR_HV)
+ return true;
+
+ t->cpu_features &= ~(CPU_FTR_HVMODE | CPU_FTR_P9_TM_HV_ASSIST);
+ return false;
+}
+
+static void init_LPCR_ISA300(u64 lpcr, u64 lpes)
+{
+ /* POWER9 has no VRMASD */
+ lpcr |= (lpes << LPCR_LPES_SH) & LPCR_LPES;
+ lpcr |= LPCR_PECE0|LPCR_PECE1|LPCR_PECE2;
+ lpcr |= (4ull << LPCR_DPFD_SH) & LPCR_DPFD;
+ lpcr &= ~LPCR_HDICE; /* clear HDICE */
+ lpcr |= (4ull << LPCR_VC_SH);
+ mtspr(SPRN_LPCR, lpcr);
+ isync();
+}
+
+/*
+ * Setup a sane LPCR:
+ * Called with initial LPCR and desired LPES 2-bit value
+ *
+ * LPES = 0b01 (HSRR0/1 used for 0x500)
+ * PECE = 0b111
+ * DPFD = 4
+ * HDICE = 0
+ * VC = 0b100 (VPM0=1, VPM1=0, ISL=0)
+ * VRMASD = 0b10000 (L=1, LP=00)
+ *
+ * Other bits untouched for now
+ */
+static void init_LPCR_ISA206(u64 lpcr, u64 lpes)
+{
+ lpcr |= (0x10ull << LPCR_VRMASD_SH) & LPCR_VRMASD;
+ init_LPCR_ISA300(lpcr, lpes);
+}
+
+static void init_FSCR(void)
+{
+ u64 fscr;
+
+ fscr = mfspr(SPRN_FSCR);
+ fscr |= FSCR_TAR|FSCR_EBB;
+ mtspr(SPRN_FSCR, fscr);
+}
+
+static void init_FSCR_power9(void)
+{
+ u64 fscr;
+
+ fscr = mfspr(SPRN_FSCR);
+ fscr |= FSCR_SCV;
+ mtspr(SPRN_FSCR, fscr);
+ init_FSCR();
+}
+
+static void init_FSCR_power10(void)
+{
+ u64 fscr;
+
+ fscr = mfspr(SPRN_FSCR);
+ fscr |= FSCR_PREFIX;
+ mtspr(SPRN_FSCR, fscr);
+ init_FSCR_power9();
+}
+
+static void init_HFSCR(void)
+{
+ u64 hfscr;
+
+ hfscr = mfspr(SPRN_HFSCR);
+ hfscr |= HFSCR_TAR|HFSCR_TM|HFSCR_BHRB|HFSCR_PM|HFSCR_DSCR|\
+ HFSCR_VECVSX|HFSCR_FP|HFSCR_EBB|HFSCR_MSGP;
+ mtspr(SPRN_HFSCR, hfscr);
+}
+
+static void init_PMU_HV(void)
+{
+ mtspr(SPRN_MMCRC, 0);
+}
+
+static void init_PMU_HV_ISA207(void)
+{
+ mtspr(SPRN_MMCRH, 0);
+}
+
+static void init_PMU(void)
+{
+ mtspr(SPRN_MMCRA, 0);
+ mtspr(SPRN_MMCR0, 0);
+ mtspr(SPRN_MMCR1, 0);
+ mtspr(SPRN_MMCR2, 0);
+}
+
+static void init_PMU_ISA207(void)
+{
+ mtspr(SPRN_MMCRS, 0);
+}
+
+static void init_PMU_ISA31(void)
+{
+ mtspr(SPRN_MMCR3, 0);
+ mtspr(SPRN_MMCRA, MMCRA_BHRB_DISABLE);
+}
+
+/*
+ * Note that we can be called twice of pseudo-PVRs.
+ * The parameter offset is not used.
+ */
+
+void __setup_cpu_power7(unsigned long offset, struct cpu_spec *t)
+{
+ if (!init_hvmode_206(t))
+ return;
+
+ mtspr(SPRN_LPID, 0);
+ mtspr(SPRN_PCR, PCR_MASK);
+ init_LPCR_ISA206(mfspr(SPRN_LPCR), LPCR_LPES1 >> LPCR_LPES_SH);
+}
+
+void __restore_cpu_power7(void)
+{
+ u64 msr;
+
+ msr = mfmsr();
+ if (!(msr & MSR_HV))
+ return;
+
+ mtspr(SPRN_LPID, 0);
+ mtspr(SPRN_PCR, PCR_MASK);
+ init_LPCR_ISA206(mfspr(SPRN_LPCR), LPCR_LPES1 >> LPCR_LPES_SH);
+}
+
+void __setup_cpu_power8(unsigned long offset, struct cpu_spec *t)
+{
+ init_FSCR();
+ init_PMU();
+ init_PMU_ISA207();
+
+ if (!init_hvmode_206(t))
+ return;
+
+ mtspr(SPRN_LPID, 0);
+ mtspr(SPRN_PCR, PCR_MASK);
+ init_LPCR_ISA206(mfspr(SPRN_LPCR) | LPCR_PECEDH, 0); /* LPES = 0 */
+ init_HFSCR();
+ init_PMU_HV();
+ init_PMU_HV_ISA207();
+}
+
+void __restore_cpu_power8(void)
+{
+ u64 msr;
+
+ init_FSCR();
+ init_PMU();
+ init_PMU_ISA207();
+
+ msr = mfmsr();
+ if (!(msr & MSR_HV))
+ return;
+
+ mtspr(SPRN_LPID, 0);
+ mtspr(SPRN_PCR, PCR_MASK);
+ init_LPCR_ISA206(mfspr(SPRN_LPCR) | LPCR_PECEDH, 0); /* LPES = 0 */
+ init_HFSCR();
+ init_PMU_HV();
+ init_PMU_HV_ISA207();
+}
+
+void __setup_cpu_power9(unsigned long offset, struct cpu_spec *t)
+{
+ init_FSCR_power9();
+ init_PMU();
+
+ if (!init_hvmode_206(t))
+ return;
+
+ mtspr(SPRN_PSSCR, 0);
+ mtspr(SPRN_LPID, 0);
+ mtspr(SPRN_PID, 0);
+ mtspr(SPRN_PCR, PCR_MASK);
+ init_LPCR_ISA300((mfspr(SPRN_LPCR) | LPCR_PECEDH | LPCR_PECE_HVEE |\
+ LPCR_HVICE | LPCR_HEIC) & ~(LPCR_UPRT | LPCR_HR), 0);
+ init_HFSCR();
+ init_PMU_HV();
+}
+
+void __restore_cpu_power9(void)
+{
+ u64 msr;
+
+ init_FSCR_power9();
+ init_PMU();
+
+ msr = mfmsr();
+ if (!(msr & MSR_HV))
+ return;
+
+ mtspr(SPRN_PSSCR, 0);
+ mtspr(SPRN_LPID, 0);
+ mtspr(SPRN_PID, 0);
+ mtspr(SPRN_PCR, PCR_MASK);
+ init_LPCR_ISA300((mfspr(SPRN_LPCR) | LPCR_PECEDH | LPCR_PECE_HVEE |\
+ LPCR_HVICE | LPCR_HEIC) & ~(LPCR_UPRT | LPCR_HR), 0);
+ init_HFSCR();
+ init_PMU_HV();
+}
+
+void __setup_cpu_power10(unsigned long offset, struct cpu_spec *t)
+{
+ init_FSCR_power10();
+ init_PMU();
+ init_PMU_ISA31();
+
+ if (!init_hvmode_206(t))
+ return;
+
+ mtspr(SPRN_PSSCR, 0);
+ mtspr(SPRN_LPID, 0);
+ mtspr(SPRN_PID, 0);
+ mtspr(SPRN_PCR, PCR_MASK);
+ init_LPCR_ISA300((mfspr(SPRN_LPCR) | LPCR_PECEDH | LPCR_PECE_HVEE |\
+ LPCR_HVICE | LPCR_HEIC) & ~(LPCR_UPRT | LPCR_HR), 0);
+ init_HFSCR();
+ init_PMU_HV();
+}
+
+void __restore_cpu_power10(void)
+{
+ u64 msr;
+
+ init_FSCR_power10();
+ init_PMU();
+ init_PMU_ISA31();
+
+ msr = mfmsr();
+ if (!(msr & MSR_HV))
+ return;
+
+ mtspr(SPRN_PSSCR, 0);
+ mtspr(SPRN_LPID, 0);
+ mtspr(SPRN_PID, 0);
+ mtspr(SPRN_PCR, PCR_MASK);
+ init_LPCR_ISA300((mfspr(SPRN_LPCR) | LPCR_PECEDH | LPCR_PECE_HVEE |\
+ LPCR_HVICE | LPCR_HEIC) & ~(LPCR_UPRT | LPCR_HR), 0);
+ init_HFSCR();
+ init_PMU_HV();
+}
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index 29de58d4dfb76..8fdb40ee86d11 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -60,19 +60,15 @@ extern void __setup_cpu_7410(unsigned long offset, struct cpu_spec* spec);
extern void __setup_cpu_745x(unsigned long offset, struct cpu_spec* spec);
#endif /* CONFIG_PPC32 */
#ifdef CONFIG_PPC64
+#include <asm/cpu_setup_power.h>
extern void __setup_cpu_ppc970(unsigned long offset, struct cpu_spec* spec);
extern void __setup_cpu_ppc970MP(unsigned long offset, struct cpu_spec* spec);
extern void __setup_cpu_pa6t(unsigned long offset, struct cpu_spec* spec);
extern void __restore_cpu_pa6t(void);
extern void __restore_cpu_ppc970(void);
-extern void __setup_cpu_power7(unsigned long offset, struct cpu_spec* spec);
-extern void __restore_cpu_power7(void);
-extern void __setup_cpu_power8(unsigned long offset, struct cpu_spec* spec);
-extern void __restore_cpu_power8(void);
-extern void __setup_cpu_power9(unsigned long offset, struct cpu_spec* spec);
-extern void __restore_cpu_power9(void);
-extern void __setup_cpu_power10(unsigned long offset, struct cpu_spec* spec);
-extern void __restore_cpu_power10(void);
+extern long __machine_check_early_realmode_p7(struct pt_regs *regs);
+extern long __machine_check_early_realmode_p8(struct pt_regs *regs);
+extern long __machine_check_early_realmode_p9(struct pt_regs *regs);
#endif /* CONFIG_PPC64 */
#if defined(CONFIG_E500)
extern void __setup_cpu_e5500(unsigned long offset, struct cpu_spec* spec);
--
2.34.1
From: Suravee Suthikulpanit <[email protected]>
[ Upstream commit eb03f2d2f6a4da25d286613717d10add9ce9f175 ]
Since the function has been simplified and only call iommu_init_ga_log(),
remove the function and replace with iommu_init_ga_log() instead.
Signed-off-by: Suravee Suthikulpanit <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Fixes: 8bda0cfbdc1a ("iommu/amd: Detect and initialize guest vAPIC log")
Signed-off-by: Joerg Roedel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/iommu/amd/init.c | 17 ++++-------------
1 file changed, 4 insertions(+), 13 deletions(-)
diff --git a/drivers/iommu/amd/init.c b/drivers/iommu/amd/init.c
index 28de889aa5164..c82f8ab4783c0 100644
--- a/drivers/iommu/amd/init.c
+++ b/drivers/iommu/amd/init.c
@@ -830,9 +830,9 @@ static int iommu_ga_log_enable(struct amd_iommu *iommu)
return 0;
}
-#ifdef CONFIG_IRQ_REMAP
static int iommu_init_ga_log(struct amd_iommu *iommu)
{
+#ifdef CONFIG_IRQ_REMAP
u64 entry;
if (!AMD_IOMMU_GUEST_IR_VAPIC(amd_iommu_guest_ir))
@@ -862,18 +862,9 @@ static int iommu_init_ga_log(struct amd_iommu *iommu)
err_out:
free_ga_log(iommu);
return -EINVAL;
-}
-#endif /* CONFIG_IRQ_REMAP */
-
-static int iommu_init_ga(struct amd_iommu *iommu)
-{
- int ret = 0;
-
-#ifdef CONFIG_IRQ_REMAP
- ret = iommu_init_ga_log(iommu);
+#else
+ return 0;
#endif /* CONFIG_IRQ_REMAP */
-
- return ret;
}
static int __init alloc_cwwb_sem(struct amd_iommu *iommu)
@@ -1860,7 +1851,7 @@ static int __init iommu_init_pci(struct amd_iommu *iommu)
if (iommu_feature(iommu, FEATURE_PPR) && alloc_ppr_log(iommu))
return -ENOMEM;
- ret = iommu_init_ga(iommu);
+ ret = iommu_init_ga_log(iommu);
if (ret)
return ret;
--
2.34.1
From: Athira Rajeev <[email protected]>
[ Upstream commit 91668ab7db4bcfae332e561df1de2401f3f18553 ]
PowerISA v3.1 introduces new control bit (PMCCEXT) for restricting
access to group B PMU registers in problem state when
MMCR0 PMCC=0b00. In problem state and when MMCR0 PMCC=0b00,
setting the Monitor Mode Control Register bit 54 (MMCR0 PMCCEXT),
will restrict read permission on Group B Performance Monitor
Registers (SIER, SIAR, SDAR and MMCR1). When this bit is set to zero,
group B registers will be readable. In other platforms (like power9),
the older behaviour is retained where group B PMU SPRs are readable.
Patch adds support for MMCR0 PMCCEXT bit in power10 by enabling
this bit during boot and during the PMU event enable/disable callback
functions.
Signed-off-by: Athira Rajeev <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/include/asm/reg.h | 1 +
arch/powerpc/kernel/cpu_setup_power.c | 1 +
arch/powerpc/kernel/dt_cpu_ftrs.c | 1 +
arch/powerpc/perf/core-book3s.c | 4 ++++
arch/powerpc/perf/isa207-common.c | 8 ++++++++
5 files changed, 15 insertions(+)
diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
index f4b98903064f5..6afb14b6bbc26 100644
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -865,6 +865,7 @@
#define MMCR0_BHRBA 0x00200000UL /* BHRB Access allowed in userspace */
#define MMCR0_EBE 0x00100000UL /* Event based branch enable */
#define MMCR0_PMCC 0x000c0000UL /* PMC control */
+#define MMCR0_PMCCEXT ASM_CONST(0x00000200) /* PMCCEXT control */
#define MMCR0_PMCC_U6 0x00080000UL /* PMC1-6 are R/W by user (PR) */
#define MMCR0_PMC1CE 0x00008000UL /* PMC1 count enable*/
#define MMCR0_PMCjCE ASM_CONST(0x00004000) /* PMCj count enable*/
diff --git a/arch/powerpc/kernel/cpu_setup_power.c b/arch/powerpc/kernel/cpu_setup_power.c
index 0c2191ee139ec..3cca88ee96d71 100644
--- a/arch/powerpc/kernel/cpu_setup_power.c
+++ b/arch/powerpc/kernel/cpu_setup_power.c
@@ -123,6 +123,7 @@ static void init_PMU_ISA31(void)
{
mtspr(SPRN_MMCR3, 0);
mtspr(SPRN_MMCRA, MMCRA_BHRB_DISABLE);
+ mtspr(SPRN_MMCR0, MMCR0_PMCCEXT);
}
/*
diff --git a/arch/powerpc/kernel/dt_cpu_ftrs.c b/arch/powerpc/kernel/dt_cpu_ftrs.c
index 1098863e17ee8..9d079659b24d3 100644
--- a/arch/powerpc/kernel/dt_cpu_ftrs.c
+++ b/arch/powerpc/kernel/dt_cpu_ftrs.c
@@ -454,6 +454,7 @@ static void init_pmu_power10(void)
mtspr(SPRN_MMCR3, 0);
mtspr(SPRN_MMCRA, MMCRA_BHRB_DISABLE);
+ mtspr(SPRN_MMCR0, MMCR0_PMCCEXT);
}
static int __init feat_enable_pmu_power10(struct dt_cpu_feature *f)
diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c
index 91452313489f1..7bda7499d0401 100644
--- a/arch/powerpc/perf/core-book3s.c
+++ b/arch/powerpc/perf/core-book3s.c
@@ -95,6 +95,7 @@ static unsigned int freeze_events_kernel = MMCR0_FCS;
#define SPRN_SIER3 0
#define MMCRA_SAMPLE_ENABLE 0
#define MMCRA_BHRB_DISABLE 0
+#define MMCR0_PMCCEXT 0
static inline unsigned long perf_ip_adjust(struct pt_regs *regs)
{
@@ -1245,6 +1246,9 @@ static void power_pmu_disable(struct pmu *pmu)
val |= MMCR0_FC;
val &= ~(MMCR0_EBE | MMCR0_BHRBA | MMCR0_PMCC | MMCR0_PMAO |
MMCR0_FC56);
+ /* Set mmcr0 PMCCEXT for p10 */
+ if (ppmu->flags & PPMU_ARCH_31)
+ val |= MMCR0_PMCCEXT;
/*
* The barrier is to make sure the mtspr has been
diff --git a/arch/powerpc/perf/isa207-common.c b/arch/powerpc/perf/isa207-common.c
index 5e8eedda45d39..58448f0e47213 100644
--- a/arch/powerpc/perf/isa207-common.c
+++ b/arch/powerpc/perf/isa207-common.c
@@ -561,6 +561,14 @@ int isa207_compute_mmcr(u64 event[], int n_ev,
if (!(pmc_inuse & 0x60))
mmcr->mmcr0 |= MMCR0_FC56;
+ /*
+ * Set mmcr0 (PMCCEXT) for p10 which
+ * will restrict access to group B registers
+ * when MMCR0 PMCC=0b00.
+ */
+ if (cpu_has_feature(CPU_FTR_ARCH_31))
+ mmcr->mmcr0 |= MMCR0_PMCCEXT;
+
mmcr->mmcr1 = mmcr1;
mmcr->mmcra = mmcra;
mmcr->mmcr2 = mmcr2;
--
2.34.1
From: Christophe Leroy <[email protected]>
[ Upstream commit af11dee4361b3519981fa04d014873f9d9edd6ac ]
================================================================================
UBSAN: shift-out-of-bounds in arch/powerpc/mm/kasan/book3s_32.c:22:23
shift exponent -1 is negative
CPU: 0 PID: 0 Comm: swapper Not tainted 5.15.5-gentoo-PowerMacG4 #9
Call Trace:
[c214be60] [c0ba0048] dump_stack_lvl+0x80/0xb0 (unreliable)
[c214be80] [c0b99288] ubsan_epilogue+0x10/0x5c
[c214be90] [c0b98fe0] __ubsan_handle_shift_out_of_bounds+0x94/0x138
[c214bf00] [c1c0f010] kasan_init_region+0xd8/0x26c
[c214bf30] [c1c0ed84] kasan_init+0xc0/0x198
[c214bf70] [c1c08024] setup_arch+0x18/0x54c
[c214bfc0] [c1c037f0] start_kernel+0x90/0x33c
[c214bff0] [00003610] 0x3610
================================================================================
This happens when the directly mapped memory is a power of 2.
Fix it by checking the shift and set the result to 0 when shift is -1
Fixes: 7974c4732642 ("powerpc/32s: Implement dedicated kasan_init_region()")
Reported-by: Erhard Furtner <[email protected]>
Signed-off-by: Christophe Leroy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215169
Link: https://lore.kernel.org/r/15cbc3439d4ad988b225e2119ec99502a5cc6ad3.1638261744.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/mm/kasan/book3s_32.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/powerpc/mm/kasan/book3s_32.c b/arch/powerpc/mm/kasan/book3s_32.c
index 202bd260a0095..35b287b0a8da4 100644
--- a/arch/powerpc/mm/kasan/book3s_32.c
+++ b/arch/powerpc/mm/kasan/book3s_32.c
@@ -19,7 +19,8 @@ int __init kasan_init_region(void *start, size_t size)
block = memblock_alloc(k_size, k_size_base);
if (block && k_size_base >= SZ_128K && k_start == ALIGN(k_start, k_size_base)) {
- int k_size_more = 1 << (ffs(k_size - k_size_base) - 1);
+ int shift = ffs(k_size - k_size_base);
+ int k_size_more = shift ? 1 << (shift - 1) : 0;
setbat(-1, k_start, __pa(block), k_size_base, PAGE_KERNEL);
if (k_size_more >= SZ_128K)
--
2.34.1
From: Thomas Gleixner <[email protected]>
[ Upstream commit 29bbc35e29d9b6347780dcacde2deb4b39344167 ]
pci_irq_vector() and pci_irq_get_affinity() use the list position to find the
MSI-X descriptor at a given index. That's correct for the normal case where
the entry number is the same as the list position.
But it's wrong for cases where MSI-X was allocated with an entries array
describing sparse entry numbers into the hardware message descriptor
table. That's inconsistent at best.
Make it always check the entry number because that's what the zero base
index really means. This change won't break existing users which use a
sparse entries array for allocation because these users retrieve the Linux
interrupt number from the entries array after allocation and none of them
uses pci_irq_vector() or pci_irq_get_affinity().
Fixes: aff171641d18 ("PCI: Provide sensible IRQ vector alloc/free routines")
Signed-off-by: Thomas Gleixner <[email protected]>
Tested-by: Juergen Gross <[email protected]>
Reviewed-by: Jason Gunthorpe <[email protected]>
Acked-by: Bjorn Helgaas <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pci/msi.c | 26 ++++++++++++++++++--------
1 file changed, 18 insertions(+), 8 deletions(-)
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index 57314fec2261b..3da69b26e6743 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -1291,19 +1291,24 @@ EXPORT_SYMBOL(pci_free_irq_vectors);
/**
* pci_irq_vector - return Linux IRQ number of a device vector
- * @dev: PCI device to operate on
- * @nr: device-relative interrupt vector index (0-based).
+ * @dev: PCI device to operate on
+ * @nr: Interrupt vector index (0-based)
+ *
+ * @nr has the following meanings depending on the interrupt mode:
+ * MSI-X: The index in the MSI-X vector table
+ * MSI: The index of the enabled MSI vectors
+ * INTx: Must be 0
+ *
+ * Return: The Linux interrupt number or -EINVAl if @nr is out of range.
*/
int pci_irq_vector(struct pci_dev *dev, unsigned int nr)
{
if (dev->msix_enabled) {
struct msi_desc *entry;
- int i = 0;
for_each_pci_msi_entry(entry, dev) {
- if (i == nr)
+ if (entry->msi_attrib.entry_nr == nr)
return entry->irq;
- i++;
}
WARN_ON_ONCE(1);
return -EINVAL;
@@ -1327,17 +1332,22 @@ EXPORT_SYMBOL(pci_irq_vector);
* pci_irq_get_affinity - return the affinity of a particular MSI vector
* @dev: PCI device to operate on
* @nr: device-relative interrupt vector index (0-based).
+ *
+ * @nr has the following meanings depending on the interrupt mode:
+ * MSI-X: The index in the MSI-X vector table
+ * MSI: The index of the enabled MSI vectors
+ * INTx: Must be 0
+ *
+ * Return: A cpumask pointer or NULL if @nr is out of range
*/
const struct cpumask *pci_irq_get_affinity(struct pci_dev *dev, int nr)
{
if (dev->msix_enabled) {
struct msi_desc *entry;
- int i = 0;
for_each_pci_msi_entry(entry, dev) {
- if (i == nr)
+ if (entry->msi_attrib.entry_nr == nr)
return &entry->affinity->mask;
- i++;
}
WARN_ON_ONCE(1);
return NULL;
--
2.34.1
From: Jan Kara <[email protected]>
[ Upstream commit 173b6e383d2a204c9921ffc1eca3b87aa2106c33 ]
A user reported FITRIM ioctl failing for him on ext4 on some devices
without apparent reason. After some debugging we've found out that
these devices (being LVM volumes) report rather large discard
granularity of 42MB and the filesystem had 1k blocksize and thus group
size of 8MB. Because ext4 FITRIM implementation puts discard
granularity into minlen, ext4_trim_fs() declared the trim request as
invalid. However just silently doing nothing seems to be a more
appropriate reaction to such combination of parameters since user did
not specify anything wrong.
CC: Lukas Czerner <[email protected]>
Fixes: 5c2ed62fd447 ("ext4: Adjust minlen with discard_granularity in the FITRIM ioctl")
Signed-off-by: Jan Kara <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/ext4/ioctl.c | 2 --
fs/ext4/mballoc.c | 8 ++++++++
2 files changed, 8 insertions(+), 2 deletions(-)
diff --git a/fs/ext4/ioctl.c b/fs/ext4/ioctl.c
index cb54ea6461fd8..413bf3d2f7844 100644
--- a/fs/ext4/ioctl.c
+++ b/fs/ext4/ioctl.c
@@ -1123,8 +1123,6 @@ resizefs_out:
sizeof(range)))
return -EFAULT;
- range.minlen = max((unsigned int)range.minlen,
- q->limits.discard_granularity);
ret = ext4_trim_fs(sb, &range);
if (ret < 0)
return ret;
diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c
index d7cb7d719ee58..60aef7fdd61d0 100644
--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -5815,6 +5815,7 @@ out:
*/
int ext4_trim_fs(struct super_block *sb, struct fstrim_range *range)
{
+ struct request_queue *q = bdev_get_queue(sb->s_bdev);
struct ext4_group_info *grp;
ext4_group_t group, first_group, last_group;
ext4_grpblk_t cnt = 0, first_cluster, last_cluster;
@@ -5833,6 +5834,13 @@ int ext4_trim_fs(struct super_block *sb, struct fstrim_range *range)
start >= max_blks ||
range->len < sb->s_blocksize)
return -EINVAL;
+ /* No point to try to trim less than discard granularity */
+ if (range->minlen < q->limits.discard_granularity) {
+ minlen = EXT4_NUM_B2C(EXT4_SB(sb),
+ q->limits.discard_granularity >> sb->s_blocksize_bits);
+ if (minlen > EXT4_CLUSTERS_PER_GROUP(sb))
+ goto out;
+ }
if (end >= max_blks)
end = max_blks - 1;
if (end <= first_data_blk)
--
2.34.1
From: Chen Jun <[email protected]>
[ Upstream commit 0ef333f5ba7f24f5d8478425c163d3097f1c7afd ]
Locality is not appropriately requested before writing the int mask.
Add the missing boilerplate.
Fixes: e6aef069b6e9 ("tpm_tis: convert to using locality callbacks")
Signed-off-by: Chen Jun <[email protected]>
Reviewed-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/char/tpm/tpm_tis_core.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/char/tpm/tpm_tis_core.c b/drivers/char/tpm/tpm_tis_core.c
index b2659a4c40168..e2df1098a812f 100644
--- a/drivers/char/tpm/tpm_tis_core.c
+++ b/drivers/char/tpm/tpm_tis_core.c
@@ -994,7 +994,15 @@ int tpm_tis_core_init(struct device *dev, struct tpm_tis_data *priv, int irq,
intmask |= TPM_INTF_CMD_READY_INT | TPM_INTF_LOCALITY_CHANGE_INT |
TPM_INTF_DATA_AVAIL_INT | TPM_INTF_STS_VALID_INT;
intmask &= ~TPM_GLOBAL_INT_ENABLE;
+
+ rc = request_locality(chip, 0);
+ if (rc < 0) {
+ rc = -ENODEV;
+ goto out_err;
+ }
+
tpm_tis_write32(priv, TPM_INT_ENABLE(priv->locality), intmask);
+ release_locality(chip, 0);
rc = tpm_chip_start(chip);
if (rc)
--
2.34.1
From: Marc Kleine-Budde <[email protected]>
[ Upstream commit 3bd9d8ce6f8c5c43ee2f1106021db0f98882cc75 ]
This patch adds the missing newline to printed strings.
Fixes: 55e5b97f003e ("can: mcp25xxfd: add driver for Microchip MCP25xxFD SPI CAN")
Link: https://lore.kernel.org/all/[email protected]
Signed-off-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c b/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c
index 4e13f6dfb91a2..e0b322ab03628 100644
--- a/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c
+++ b/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c
@@ -2497,7 +2497,7 @@ static int mcp251xfd_register_chip_detect(struct mcp251xfd_priv *priv)
if (!mcp251xfd_is_251X(priv) &&
priv->devtype_data.model != devtype_data->model) {
netdev_info(ndev,
- "Detected %s, but firmware specifies a %s. Fixing up.",
+ "Detected %s, but firmware specifies a %s. Fixing up.\n",
__mcp251xfd_get_model_str(devtype_data->model),
mcp251xfd_get_model_str(priv));
}
@@ -2534,7 +2534,7 @@ static int mcp251xfd_register_check_rx_int(struct mcp251xfd_priv *priv)
return 0;
netdev_info(priv->ndev,
- "RX_INT active after softreset, disabling RX_INT support.");
+ "RX_INT active after softreset, disabling RX_INT support.\n");
devm_gpiod_put(&priv->spi->dev, priv->rx_int);
priv->rx_int = NULL;
--
2.34.1
From: Antony Antony <[email protected]>
[ Upstream commit 68ac0f3810e76a853b5f7b90601a05c3048b8b54 ]
xfrm ineterface does not allow xfrm if_id = 0
fail to create or update xfrm state and policy.
With this commit:
ip xfrm policy add src 192.0.2.1 dst 192.0.2.2 dir out if_id 0
RTNETLINK answers: Invalid argument
ip xfrm state add src 192.0.2.1 dst 192.0.2.2 proto esp spi 1 \
reqid 1 mode tunnel aead 'rfc4106(gcm(aes))' \
0x1111111111111111111111111111111111111111 96 if_id 0
RTNETLINK answers: Invalid argument
v1->v2 change:
- add Fixes: tag
Fixes: 9f8550e4bd9d ("xfrm: fix disable_xfrm sysctl when used on xfrm interfaces")
Signed-off-by: Antony Antony <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/xfrm/xfrm_user.c | 21 ++++++++++++++++++---
1 file changed, 18 insertions(+), 3 deletions(-)
diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c
index 97f7ebf5324e7..ddf1b3a5f7c1f 100644
--- a/net/xfrm/xfrm_user.c
+++ b/net/xfrm/xfrm_user.c
@@ -621,8 +621,13 @@ static struct xfrm_state *xfrm_state_construct(struct net *net,
xfrm_smark_init(attrs, &x->props.smark);
- if (attrs[XFRMA_IF_ID])
+ if (attrs[XFRMA_IF_ID]) {
x->if_id = nla_get_u32(attrs[XFRMA_IF_ID]);
+ if (!x->if_id) {
+ err = -EINVAL;
+ goto error;
+ }
+ }
err = __xfrm_init_state(x, false, attrs[XFRMA_OFFLOAD_DEV]);
if (err)
@@ -1353,8 +1358,13 @@ static int xfrm_alloc_userspi(struct sk_buff *skb, struct nlmsghdr *nlh,
mark = xfrm_mark_get(attrs, &m);
- if (attrs[XFRMA_IF_ID])
+ if (attrs[XFRMA_IF_ID]) {
if_id = nla_get_u32(attrs[XFRMA_IF_ID]);
+ if (!if_id) {
+ err = -EINVAL;
+ goto out_noput;
+ }
+ }
if (p->info.seq) {
x = xfrm_find_acq_byseq(net, mark, p->info.seq);
@@ -1667,8 +1677,13 @@ static struct xfrm_policy *xfrm_policy_construct(struct net *net, struct xfrm_us
xfrm_mark_get(attrs, &xp->mark);
- if (attrs[XFRMA_IF_ID])
+ if (attrs[XFRMA_IF_ID]) {
xp->if_id = nla_get_u32(attrs[XFRMA_IF_ID]);
+ if (!xp->if_id) {
+ err = -EINVAL;
+ goto error;
+ }
+ }
return xp;
error:
--
2.34.1
From: Dan Carpenter <[email protected]>
[ Upstream commit 43d012123122cc69feacab55b71369f386c19566 ]
This code is holding the &ofdpa->flow_tbl_lock spinlock so it is not
allowed to sleep. That means we have to pass the OFDPA_OP_FLAG_NOWAIT
flag to ofdpa_flow_tbl_del().
Fixes: 936bd486564a ("rocker: use FIB notifications instead of switchdev calls")
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/rocker/rocker_ofdpa.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/rocker/rocker_ofdpa.c b/drivers/net/ethernet/rocker/rocker_ofdpa.c
index 7072b249c8bd6..8157666209798 100644
--- a/drivers/net/ethernet/rocker/rocker_ofdpa.c
+++ b/drivers/net/ethernet/rocker/rocker_ofdpa.c
@@ -2795,7 +2795,8 @@ static void ofdpa_fib4_abort(struct rocker *rocker)
if (!ofdpa_port)
continue;
nh->fib_nh_flags &= ~RTNH_F_OFFLOAD;
- ofdpa_flow_tbl_del(ofdpa_port, OFDPA_OP_FLAG_REMOVE,
+ ofdpa_flow_tbl_del(ofdpa_port,
+ OFDPA_OP_FLAG_REMOVE | OFDPA_OP_FLAG_NOWAIT,
flow_entry);
}
spin_unlock_irqrestore(&ofdpa->flow_tbl_lock, flags);
--
2.34.1
From: Marek Behún <[email protected]>
[ Upstream commit 62480772263ab6b52e758f2346c70a526abd1d28 ]
Add generic compatible string "ns16550a" to serial port nodes of Armada
38x.
This makes it possible to use earlycon.
Fixes: 0d3d96ab0059 ("ARM: mvebu: add Device Tree description of the Armada 380/385 SoCs")
Signed-off-by: Pali Rohár <[email protected]>
Signed-off-by: Marek Behún <[email protected]>
Signed-off-by: Gregory CLEMENT <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/armada-38x.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi
index 9b1a24cc5e91f..df3c8d1d8f641 100644
--- a/arch/arm/boot/dts/armada-38x.dtsi
+++ b/arch/arm/boot/dts/armada-38x.dtsi
@@ -168,7 +168,7 @@
};
uart0: serial@12000 {
- compatible = "marvell,armada-38x-uart";
+ compatible = "marvell,armada-38x-uart", "ns16550a";
reg = <0x12000 0x100>;
reg-shift = <2>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
@@ -178,7 +178,7 @@
};
uart1: serial@12100 {
- compatible = "marvell,armada-38x-uart";
+ compatible = "marvell,armada-38x-uart", "ns16550a";
reg = <0x12100 0x100>;
reg-shift = <2>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
--
2.34.1
From: Conor Dooley <[email protected]>
[ Upstream commit c861c1be3897845313a0df47804b1db37c7052e1 ]
bm1880_clk_unregister_pll & bm1880_clk_unregister_div both try to
free statically allocated variables, so remove those kfrees.
For example, if we take L703 kfree(div_hw):
- div_hw is a bm1880_div_hw_clock pointer
- in bm1880_clk_register_plls this is pointed to an element of arg1:
struct bm1880_div_hw_clock *clks
- in the probe, where bm1880_clk_register_plls is called arg1 is
bm1880_div_clks, defined on L371:
static struct bm1880_div_hw_clock bm1880_div_clks[]
Signed-off-by: Conor Dooley <[email protected]>
Fixes: 1ab4601da55b ("clk: Add common clock driver for BM1880 SoC")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/clk-bm1880.c | 20 ++------------------
1 file changed, 2 insertions(+), 18 deletions(-)
diff --git a/drivers/clk/clk-bm1880.c b/drivers/clk/clk-bm1880.c
index e6d6599d310a1..fad78a22218e8 100644
--- a/drivers/clk/clk-bm1880.c
+++ b/drivers/clk/clk-bm1880.c
@@ -522,14 +522,6 @@ static struct clk_hw *bm1880_clk_register_pll(struct bm1880_pll_hw_clock *pll_cl
return hw;
}
-static void bm1880_clk_unregister_pll(struct clk_hw *hw)
-{
- struct bm1880_pll_hw_clock *pll_hw = to_bm1880_pll_clk(hw);
-
- clk_hw_unregister(hw);
- kfree(pll_hw);
-}
-
static int bm1880_clk_register_plls(struct bm1880_pll_hw_clock *clks,
int num_clks,
struct bm1880_clock_data *data)
@@ -555,7 +547,7 @@ static int bm1880_clk_register_plls(struct bm1880_pll_hw_clock *clks,
err_clk:
while (i--)
- bm1880_clk_unregister_pll(data->hw_data.hws[clks[i].pll.id]);
+ clk_hw_unregister(data->hw_data.hws[clks[i].pll.id]);
return PTR_ERR(hw);
}
@@ -695,14 +687,6 @@ static struct clk_hw *bm1880_clk_register_div(struct bm1880_div_hw_clock *div_cl
return hw;
}
-static void bm1880_clk_unregister_div(struct clk_hw *hw)
-{
- struct bm1880_div_hw_clock *div_hw = to_bm1880_div_clk(hw);
-
- clk_hw_unregister(hw);
- kfree(div_hw);
-}
-
static int bm1880_clk_register_divs(struct bm1880_div_hw_clock *clks,
int num_clks,
struct bm1880_clock_data *data)
@@ -729,7 +713,7 @@ static int bm1880_clk_register_divs(struct bm1880_div_hw_clock *clks,
err_clk:
while (i--)
- bm1880_clk_unregister_div(data->hw_data.hws[clks[i].div.id]);
+ clk_hw_unregister(data->hw_data.hws[clks[i].div.id]);
return PTR_ERR(hw);
}
--
2.34.1
From: Johannes Berg <[email protected]>
[ Upstream commit 8b0f92549f2c2458200935c12a2e2a6e80234cf5 ]
On a 32-bit build, the division here needs to be done
using do_div(), otherwise the compiler will try to call
a function that doesn't exist, thus failing to build.
Fixes: b68bd2e3143a ("iwlwifi: mvm: Add FTM initiator RTT smoothing logic")
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20211219111352.e56cbf614a4d.Ib98004ccd2c7a55fd883a8ea7eebd810f406dec6@changeid
Signed-off-by: Luca Coelho <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/intel/iwlwifi/mvm/ftm-initiator.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/ftm-initiator.c b/drivers/net/wireless/intel/iwlwifi/mvm/ftm-initiator.c
index a0ce761d0c59b..fe3d52620a897 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/ftm-initiator.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/ftm-initiator.c
@@ -967,7 +967,8 @@ static void iwl_mvm_ftm_rtt_smoothing(struct iwl_mvm *mvm,
overshoot = IWL_MVM_FTM_INITIATOR_SMOOTH_OVERSHOOT;
alpha = IWL_MVM_FTM_INITIATOR_SMOOTH_ALPHA;
- rtt_avg = (alpha * rtt + (100 - alpha) * resp->rtt_avg) / 100;
+ rtt_avg = alpha * rtt + (100 - alpha) * resp->rtt_avg;
+ do_div(rtt_avg, 100);
IWL_DEBUG_INFO(mvm,
"%pM: prev rtt_avg=%lld, new rtt_avg=%lld, rtt=%lld\n",
--
2.34.1
From: Jiasheng Jiang <[email protected]>
[ Upstream commit d5a73ec96cc57cf67e51b12820fc2354e7ca46f8 ]
As the possible failure of the allocation, the devm_ioremap() may return
NULL pointer.
Take tgec_initialization() as an example.
If allocation fails, the params->base_addr will be NULL pointer and will
be assigned to tgec->regs in tgec_config().
Then it will cause the dereference of NULL pointer in set_mac_address(),
which is called by tgec_init().
Therefore, it should be better to add the sanity check after the calling
of the devm_ioremap().
Fixes: 3933961682a3 ("fsl/fman: Add FMan MAC driver")
Signed-off-by: Jiasheng Jiang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/freescale/fman/mac.c | 21 ++++++++++++++++-----
1 file changed, 16 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ethernet/freescale/fman/mac.c b/drivers/net/ethernet/freescale/fman/mac.c
index 901749a7a318b..6eeccc11b76ef 100644
--- a/drivers/net/ethernet/freescale/fman/mac.c
+++ b/drivers/net/ethernet/freescale/fman/mac.c
@@ -94,14 +94,17 @@ static void mac_exception(void *handle, enum fman_mac_exceptions ex)
__func__, ex);
}
-static void set_fman_mac_params(struct mac_device *mac_dev,
- struct fman_mac_params *params)
+static int set_fman_mac_params(struct mac_device *mac_dev,
+ struct fman_mac_params *params)
{
struct mac_priv_s *priv = mac_dev->priv;
params->base_addr = (typeof(params->base_addr))
devm_ioremap(priv->dev, mac_dev->res->start,
resource_size(mac_dev->res));
+ if (!params->base_addr)
+ return -ENOMEM;
+
memcpy(¶ms->addr, mac_dev->addr, sizeof(mac_dev->addr));
params->max_speed = priv->max_speed;
params->phy_if = mac_dev->phy_if;
@@ -112,6 +115,8 @@ static void set_fman_mac_params(struct mac_device *mac_dev,
params->event_cb = mac_exception;
params->dev_id = mac_dev;
params->internal_phy_node = priv->internal_phy_node;
+
+ return 0;
}
static int tgec_initialization(struct mac_device *mac_dev)
@@ -123,7 +128,9 @@ static int tgec_initialization(struct mac_device *mac_dev)
priv = mac_dev->priv;
- set_fman_mac_params(mac_dev, ¶ms);
+ err = set_fman_mac_params(mac_dev, ¶ms);
+ if (err)
+ goto _return;
mac_dev->fman_mac = tgec_config(¶ms);
if (!mac_dev->fman_mac) {
@@ -169,7 +176,9 @@ static int dtsec_initialization(struct mac_device *mac_dev)
priv = mac_dev->priv;
- set_fman_mac_params(mac_dev, ¶ms);
+ err = set_fman_mac_params(mac_dev, ¶ms);
+ if (err)
+ goto _return;
mac_dev->fman_mac = dtsec_config(¶ms);
if (!mac_dev->fman_mac) {
@@ -218,7 +227,9 @@ static int memac_initialization(struct mac_device *mac_dev)
priv = mac_dev->priv;
- set_fman_mac_params(mac_dev, ¶ms);
+ err = set_fman_mac_params(mac_dev, ¶ms);
+ if (err)
+ goto _return;
if (priv->max_speed == SPEED_10000)
params.phy_if = PHY_INTERFACE_MODE_XGMII;
--
2.34.1
From: Sicelo A. Mhlongo <[email protected]>
[ Upstream commit e9af026a3b24f59d7af4609f73e0ef60a4d6d516 ]
Since the LED multicolor framework support was added in commit
92a81562e695 ("leds: lp55xx: Add multicolor framework support to lp55xx")
LEDs on this platform stopped working.
Fixes: 92a81562e695 ("leds: lp55xx: Add multicolor framework support to lp55xx")
Fixes: ac219bf3c9bd ("leds: lp55xx: Convert to use GPIO descriptors")
Signed-off-by: Merlijn Wajer <[email protected]>
Signed-off-by: Sicelo A. Mhlongo <[email protected]>
Signed-off-by: Pavel Machek <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/omap3-n900.dts | 50 +++++++++++++++++++++++++-------
1 file changed, 40 insertions(+), 10 deletions(-)
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index 32335d4ce478b..d40c3d2c4914e 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -8,6 +8,7 @@
#include "omap34xx.dtsi"
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/*
* Default secure signed bootloader (Nokia X-Loader) does not enable L3 firewall
@@ -630,63 +631,92 @@
};
lp5523: lp5523@32 {
+ #address-cells = <1>;
+ #size-cells = <0>;
compatible = "national,lp5523";
reg = <0x32>;
clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
- enable-gpio = <&gpio2 9 GPIO_ACTIVE_HIGH>; /* 41 */
+ enable-gpios = <&gpio2 9 GPIO_ACTIVE_HIGH>; /* 41 */
- chan0 {
+ led@0 {
+ reg = <0>;
chan-name = "lp5523:kb1";
led-cur = /bits/ 8 <50>;
max-cur = /bits/ 8 <100>;
+ color = <LED_COLOR_ID_WHITE>;
+ function = LED_FUNCTION_KBD_BACKLIGHT;
};
- chan1 {
+ led@1 {
+ reg = <1>;
chan-name = "lp5523:kb2";
led-cur = /bits/ 8 <50>;
max-cur = /bits/ 8 <100>;
+ color = <LED_COLOR_ID_WHITE>;
+ function = LED_FUNCTION_KBD_BACKLIGHT;
};
- chan2 {
+ led@2 {
+ reg = <2>;
chan-name = "lp5523:kb3";
led-cur = /bits/ 8 <50>;
max-cur = /bits/ 8 <100>;
+ color = <LED_COLOR_ID_WHITE>;
+ function = LED_FUNCTION_KBD_BACKLIGHT;
};
- chan3 {
+ led@3 {
+ reg = <3>;
chan-name = "lp5523:kb4";
led-cur = /bits/ 8 <50>;
max-cur = /bits/ 8 <100>;
+ color = <LED_COLOR_ID_WHITE>;
+ function = LED_FUNCTION_KBD_BACKLIGHT;
};
- chan4 {
+ led@4 {
+ reg = <4>;
chan-name = "lp5523:b";
led-cur = /bits/ 8 <50>;
max-cur = /bits/ 8 <100>;
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_STATUS;
};
- chan5 {
+ led@5 {
+ reg = <5>;
chan-name = "lp5523:g";
led-cur = /bits/ 8 <50>;
max-cur = /bits/ 8 <100>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_STATUS;
};
- chan6 {
+ led@6 {
+ reg = <6>;
chan-name = "lp5523:r";
led-cur = /bits/ 8 <50>;
max-cur = /bits/ 8 <100>;
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_STATUS;
};
- chan7 {
+ led@7 {
+ reg = <7>;
chan-name = "lp5523:kb5";
led-cur = /bits/ 8 <50>;
max-cur = /bits/ 8 <100>;
+ color = <LED_COLOR_ID_WHITE>;
+ function = LED_FUNCTION_KBD_BACKLIGHT;
};
- chan8 {
+ led@8 {
+ reg = <8>;
chan-name = "lp5523:kb6";
led-cur = /bits/ 8 <50>;
max-cur = /bits/ 8 <100>;
+ color = <LED_COLOR_ID_WHITE>;
+ function = LED_FUNCTION_KBD_BACKLIGHT;
};
};
--
2.34.1
From: Andrii Nakryiko <[email protected]>
[ Upstream commit 62554d52e71797eefa3fc15b54008038837bb2d4 ]
.BTF and .BTF.ext ELF sections should have SHT_PROGBITS type and contain
data. If they are not, ELF is invalid or corrupted, so bail out.
Otherwise this can lead to data->d_buf being NULL and SIGSEGV later on.
Reported by oss-fuzz project.
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
tools/lib/bpf/libbpf.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/tools/lib/bpf/libbpf.c b/tools/lib/bpf/libbpf.c
index b337d6f29098b..e8ad53d31044a 100644
--- a/tools/lib/bpf/libbpf.c
+++ b/tools/lib/bpf/libbpf.c
@@ -2870,8 +2870,12 @@ static int bpf_object__elf_collect(struct bpf_object *obj)
} else if (strcmp(name, MAPS_ELF_SEC) == 0) {
obj->efile.btf_maps_shndx = idx;
} else if (strcmp(name, BTF_ELF_SEC) == 0) {
+ if (sh->sh_type != SHT_PROGBITS)
+ return -LIBBPF_ERRNO__FORMAT;
btf_data = data;
} else if (strcmp(name, BTF_EXT_ELF_SEC) == 0) {
+ if (sh->sh_type != SHT_PROGBITS)
+ return -LIBBPF_ERRNO__FORMAT;
btf_ext_data = data;
} else if (sh.sh_type == SHT_SYMTAB) {
/* already processed during the first pass above */
--
2.34.1
From: Qiang Yu <[email protected]>
[ Upstream commit 89636a06fa2ee7826a19c39c19a9bc99ab9340a9 ]
Otherwise get following warning:
DMA-API: lima 1c40000.gpu: mapping sg segment longer than device claims to support [len=4149248] [max=65536]
See: https://gitlab.freedesktop.org/mesa/mesa/-/issues/5496
Reviewed-by: Vasily Khoruzhick <[email protected]>
Reported-by: Roman Stratiienko <[email protected]>
Signed-off-by: Qiang Yu <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/lima/lima_device.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/gpu/drm/lima/lima_device.c b/drivers/gpu/drm/lima/lima_device.c
index 65fdca366e41f..36c9905894278 100644
--- a/drivers/gpu/drm/lima/lima_device.c
+++ b/drivers/gpu/drm/lima/lima_device.c
@@ -357,6 +357,7 @@ int lima_device_init(struct lima_device *ldev)
int err, i;
dma_set_coherent_mask(ldev->dev, DMA_BIT_MASK(32));
+ dma_set_max_seg_size(ldev->dev, UINT_MAX);
err = lima_clk_init(ldev);
if (err)
--
2.34.1
From: Wei Yongjun <[email protected]>
[ Upstream commit fcee5ce50bdb21116711e38635e3865594af907e ]
When firmware load failed, kernel report task hung as follows:
INFO: task xrun:5191 blocked for more than 147 seconds.
Tainted: G W 5.16.0-rc5-next-20211220+ #11
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:xrun state:D stack: 0 pid: 5191 ppid: 270 flags:0x00000004
Call Trace:
__schedule+0xc12/0x4b50 kernel/sched/core.c:4986
schedule+0xd7/0x260 kernel/sched/core.c:6369 (discriminator 1)
schedule_timeout+0x7aa/0xa80 kernel/time/timer.c:1857
wait_for_completion+0x181/0x290 kernel/sched/completion.c:85
lattice_ecp3_remove+0x32/0x40 drivers/misc/lattice-ecp3-config.c:221
spi_remove+0x72/0xb0 drivers/spi/spi.c:409
lattice_ecp3_remove() wait for signals from firmware loading, but when
load failed, firmware_load() does not send this signal. This cause
device remove hung. Fix it by sending signal even if load failed.
Fixes: 781551df57c7 ("misc: Add Lattice ECP3 FPGA configuration via SPI")
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Wei Yongjun <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/misc/lattice-ecp3-config.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/misc/lattice-ecp3-config.c b/drivers/misc/lattice-ecp3-config.c
index 5eaf74447ca1e..556bb7d705f53 100644
--- a/drivers/misc/lattice-ecp3-config.c
+++ b/drivers/misc/lattice-ecp3-config.c
@@ -76,12 +76,12 @@ static void firmware_load(const struct firmware *fw, void *context)
if (fw == NULL) {
dev_err(&spi->dev, "Cannot load firmware, aborting\n");
- return;
+ goto out;
}
if (fw->size == 0) {
dev_err(&spi->dev, "Error: Firmware size is 0!\n");
- return;
+ goto out;
}
/* Fill dummy data (24 stuffing bits for commands) */
@@ -103,7 +103,7 @@ static void firmware_load(const struct firmware *fw, void *context)
dev_err(&spi->dev,
"Error: No supported FPGA detected (JEDEC_ID=%08x)!\n",
jedec_id);
- return;
+ goto out;
}
dev_info(&spi->dev, "FPGA %s detected\n", ecp3_dev[i].name);
@@ -116,7 +116,7 @@ static void firmware_load(const struct firmware *fw, void *context)
buffer = kzalloc(fw->size + 8, GFP_KERNEL);
if (!buffer) {
dev_err(&spi->dev, "Error: Can't allocate memory!\n");
- return;
+ goto out;
}
/*
@@ -155,7 +155,7 @@ static void firmware_load(const struct firmware *fw, void *context)
"Error: Timeout waiting for FPGA to clear (status=%08x)!\n",
status);
kfree(buffer);
- return;
+ goto out;
}
dev_info(&spi->dev, "Configuring the FPGA...\n");
@@ -181,7 +181,7 @@ static void firmware_load(const struct firmware *fw, void *context)
release_firmware(fw);
kfree(buffer);
-
+out:
complete(&data->fw_loaded);
}
--
2.34.1
From: Neil Armstrong <[email protected]>
[ Upstream commit 3f2532d65a571ca02258b547b5b68ab2e9406fdb ]
The current ELD handling takes the internal connector ELD buffer and
shares it to the I2S and AHB sub-driver.
But with DRM_BRIDGE_ATTACH_NO_CONNECTOR, the connector is created
elsewhere (or not), and an eventual connector is known only
if the bridge chain up to a connector is enabled.
The current dw-hdmi code gets the current connector from
atomic_enable() so use the already stored connector pointer and
replace the buffer pointer with a callback returning the current
connector ELD buffer.
Since a connector is not always available, either pass an empty
ELD to the alsa HDMI driver or don't call snd_pcm_hw_constraint_eld()
in AHB driver.
Reported-by: Martin Blumenstingl <[email protected]>
Signed-off-by: Neil Armstrong <[email protected]>
[narmstrong: fixed typo in commit log]
Acked-by: Jernej Skrabec <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/bridge/synopsys/dw-hdmi-ahb-audio.c | 10 +++++++---
drivers/gpu/drm/bridge/synopsys/dw-hdmi-audio.h | 4 ++--
drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c | 9 ++++++++-
drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 12 ++++++++++--
4 files changed, 27 insertions(+), 8 deletions(-)
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-ahb-audio.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-ahb-audio.c
index d0db1acf11d73..7d2ed0ed2fe26 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-ahb-audio.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-ahb-audio.c
@@ -320,13 +320,17 @@ static int dw_hdmi_open(struct snd_pcm_substream *substream)
struct snd_pcm_runtime *runtime = substream->runtime;
struct snd_dw_hdmi *dw = substream->private_data;
void __iomem *base = dw->data.base;
+ u8 *eld;
int ret;
runtime->hw = dw_hdmi_hw;
- ret = snd_pcm_hw_constraint_eld(runtime, dw->data.eld);
- if (ret < 0)
- return ret;
+ eld = dw->data.get_eld(dw->data.hdmi);
+ if (eld) {
+ ret = snd_pcm_hw_constraint_eld(runtime, eld);
+ if (ret < 0)
+ return ret;
+ }
ret = snd_pcm_limit_hw_rates(runtime);
if (ret < 0)
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-audio.h b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-audio.h
index cb07dc0da5a70..f72d27208ebef 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-audio.h
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-audio.h
@@ -9,15 +9,15 @@ struct dw_hdmi_audio_data {
void __iomem *base;
int irq;
struct dw_hdmi *hdmi;
- u8 *eld;
+ u8 *(*get_eld)(struct dw_hdmi *hdmi);
};
struct dw_hdmi_i2s_audio_data {
struct dw_hdmi *hdmi;
- u8 *eld;
void (*write)(struct dw_hdmi *hdmi, u8 val, int offset);
u8 (*read)(struct dw_hdmi *hdmi, int offset);
+ u8 *(*get_eld)(struct dw_hdmi *hdmi);
};
#endif
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c
index 9fef6413741dc..9682416056ed6 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c
@@ -135,8 +135,15 @@ static int dw_hdmi_i2s_get_eld(struct device *dev, void *data, uint8_t *buf,
size_t len)
{
struct dw_hdmi_i2s_audio_data *audio = data;
+ u8 *eld;
+
+ eld = audio->get_eld(audio->hdmi);
+ if (eld)
+ memcpy(buf, eld, min_t(size_t, MAX_ELD_BYTES, len));
+ else
+ /* Pass en empty ELD if connector not available */
+ memset(buf, 0, len);
- memcpy(buf, audio->eld, min_t(size_t, MAX_ELD_BYTES, len));
return 0;
}
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
index 0c79a9ba48bb6..29c0eb4bd7546 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
@@ -756,6 +756,14 @@ static void hdmi_enable_audio_clk(struct dw_hdmi *hdmi, bool enable)
hdmi_writeb(hdmi, hdmi->mc_clkdis, HDMI_MC_CLKDIS);
}
+static u8 *hdmi_audio_get_eld(struct dw_hdmi *hdmi)
+{
+ if (!hdmi->curr_conn)
+ return NULL;
+
+ return hdmi->curr_conn->eld;
+}
+
static void dw_hdmi_ahb_audio_enable(struct dw_hdmi *hdmi)
{
hdmi_set_cts_n(hdmi, hdmi->audio_cts, hdmi->audio_n);
@@ -3395,7 +3403,7 @@ struct dw_hdmi *dw_hdmi_probe(struct platform_device *pdev,
audio.base = hdmi->regs;
audio.irq = irq;
audio.hdmi = hdmi;
- audio.eld = hdmi->connector.eld;
+ audio.get_eld = hdmi_audio_get_eld;
hdmi->enable_audio = dw_hdmi_ahb_audio_enable;
hdmi->disable_audio = dw_hdmi_ahb_audio_disable;
@@ -3408,7 +3416,7 @@ struct dw_hdmi *dw_hdmi_probe(struct platform_device *pdev,
struct dw_hdmi_i2s_audio_data audio;
audio.hdmi = hdmi;
- audio.eld = hdmi->connector.eld;
+ audio.get_eld = hdmi_audio_get_eld;
audio.write = hdmi_writeb;
audio.read = hdmi_readb;
hdmi->enable_audio = dw_hdmi_i2s_audio_enable;
--
2.34.1
From: Christophe JAILLET <[email protected]>
[ Upstream commit a917dfb66c0a1fa1caacf3d71edcafcab48e6ff0 ]
The 'cmdq->cmdq_bitmap' bitmap is 'rcfw->cmdq_depth' bits long. The size
stored in 'cmdq->bmap_size' is the size of the bitmap in bytes.
Remove this erroneous 'bmap_size' and use 'rcfw->cmdq_depth' directly in
'bnxt_qplib_disable_rcfw_channel()'. Otherwise some error messages may be
missing.
Other uses of 'cmdq_bitmap' already take into account 'rcfw->cmdq_depth'
directly.
Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Link: https://lore.kernel.org/r/47ed717c3070a1d0f53e7b4c768a4fd11caf365d.1636707421.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Christophe JAILLET <[email protected]>
Acked-by: Selvin Xavier <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/hw/bnxt_re/qplib_rcfw.c | 6 ++----
drivers/infiniband/hw/bnxt_re/qplib_rcfw.h | 1 -
2 files changed, 2 insertions(+), 5 deletions(-)
diff --git a/drivers/infiniband/hw/bnxt_re/qplib_rcfw.c b/drivers/infiniband/hw/bnxt_re/qplib_rcfw.c
index 441eb421e5e59..5759027914b01 100644
--- a/drivers/infiniband/hw/bnxt_re/qplib_rcfw.c
+++ b/drivers/infiniband/hw/bnxt_re/qplib_rcfw.c
@@ -614,8 +614,6 @@ int bnxt_qplib_alloc_rcfw_channel(struct bnxt_qplib_res *res,
if (!cmdq->cmdq_bitmap)
goto fail;
- cmdq->bmap_size = bmap_size;
-
/* Allocate one extra to hold the QP1 entries */
rcfw->qp_tbl_size = qp_tbl_sz + 1;
rcfw->qp_tbl = kcalloc(rcfw->qp_tbl_size, sizeof(struct bnxt_qplib_qp_node),
@@ -663,8 +661,8 @@ void bnxt_qplib_disable_rcfw_channel(struct bnxt_qplib_rcfw *rcfw)
iounmap(cmdq->cmdq_mbox.reg.bar_reg);
iounmap(creq->creq_db.reg.bar_reg);
- indx = find_first_bit(cmdq->cmdq_bitmap, cmdq->bmap_size);
- if (indx != cmdq->bmap_size)
+ indx = find_first_bit(cmdq->cmdq_bitmap, rcfw->cmdq_depth);
+ if (indx != rcfw->cmdq_depth)
dev_err(&rcfw->pdev->dev,
"disabling RCFW with pending cmd-bit %lx\n", indx);
diff --git a/drivers/infiniband/hw/bnxt_re/qplib_rcfw.h b/drivers/infiniband/hw/bnxt_re/qplib_rcfw.h
index 5f2f0a5a3560f..6953f4e53dd20 100644
--- a/drivers/infiniband/hw/bnxt_re/qplib_rcfw.h
+++ b/drivers/infiniband/hw/bnxt_re/qplib_rcfw.h
@@ -150,7 +150,6 @@ struct bnxt_qplib_cmdq_ctx {
wait_queue_head_t waitq;
unsigned long flags;
unsigned long *cmdq_bitmap;
- u32 bmap_size;
u32 seq_num;
};
--
2.34.1
From: Takashi Iwai <[email protected]>
[ Upstream commit 80bd64af75b4bb11c0329bc66c35da2ddfb66d88 ]
snd_ctl_remove() has to be called with card->controls_rwsem held (when
called after the card instantiation). This patch add the missing
rwsem calls around it.
Fixes: d13bd412dce2 ("ALSA: hda - Manage kcontrol lists")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/pci/hda/hda_codec.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
index 6dece719be669..39281106477eb 100644
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -1727,8 +1727,11 @@ void snd_hda_ctls_clear(struct hda_codec *codec)
{
int i;
struct hda_nid_item *items = codec->mixers.list;
+
+ down_write(&codec->card->controls_rwsem);
for (i = 0; i < codec->mixers.used; i++)
snd_ctl_remove(codec->card, items[i].kctl);
+ up_write(&codec->card->controls_rwsem);
snd_array_free(&codec->mixers);
snd_array_free(&codec->nids);
}
--
2.34.1
From: Jiasheng Jiang <[email protected]>
[ Upstream commit 9de2b9286a6dd16966959b3cb34fc2ddfd39213e ]
Yes, you are right and now the return code depending on the
init_clks().
Fixes: 6078c651947a ("soc: mediatek: Refine scpsys to support multiple platform")
Signed-off-by: Jiasheng Jiang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/soc/mediatek/mtk-scpsys.c | 15 +++++++++++----
1 file changed, 11 insertions(+), 4 deletions(-)
diff --git a/drivers/soc/mediatek/mtk-scpsys.c b/drivers/soc/mediatek/mtk-scpsys.c
index ca75b14931ec9..670cc82d17dc2 100644
--- a/drivers/soc/mediatek/mtk-scpsys.c
+++ b/drivers/soc/mediatek/mtk-scpsys.c
@@ -411,12 +411,17 @@ out:
return ret;
}
-static void init_clks(struct platform_device *pdev, struct clk **clk)
+static int init_clks(struct platform_device *pdev, struct clk **clk)
{
int i;
- for (i = CLK_NONE + 1; i < CLK_MAX; i++)
+ for (i = CLK_NONE + 1; i < CLK_MAX; i++) {
clk[i] = devm_clk_get(&pdev->dev, clk_names[i]);
+ if (IS_ERR(clk[i]))
+ return PTR_ERR(clk[i]);
+ }
+
+ return 0;
}
static struct scp *init_scp(struct platform_device *pdev,
@@ -426,7 +431,7 @@ static struct scp *init_scp(struct platform_device *pdev,
{
struct genpd_onecell_data *pd_data;
struct resource *res;
- int i, j;
+ int i, j, ret;
struct scp *scp;
struct clk *clk[CLK_MAX];
@@ -481,7 +486,9 @@ static struct scp *init_scp(struct platform_device *pdev,
pd_data->num_domains = num;
- init_clks(pdev, clk);
+ ret = init_clks(pdev, clk);
+ if (ret)
+ return ERR_PTR(ret);
for (i = 0; i < num; i++) {
struct scp_domain *scpd = &scp->domains[i];
--
2.34.1
From: Lukas Bulwahn <[email protected]>
[ Upstream commit a670c82d9ca4f1e7385d9d6f26ff41a50fbdd944 ]
Commit d4a451d5fc84 ("arch: remove the ARCH_PHYS_ADDR_T_64BIT config
symbol") removes config ARCH_PHYS_ADDR_T_64BIT with all instances of that
config refactored appropriately. Since then, it is recommended to use the
config PHYS_ADDR_T_64BIT instead.
Commit 171543e75272 ("MIPS: Disallow CPU_SUPPORTS_HUGEPAGES for XPA,EVA")
introduces the expression "!(32BIT && (ARCH_PHYS_ADDR_T_64BIT || EVA))"
for config CPU_SUPPORTS_HUGEPAGES, which unintentionally refers to the
non-existing symbol ARCH_PHYS_ADDR_T_64BIT instead of the intended
PHYS_ADDR_T_64BIT.
Fix this Kconfig reference to the intended PHYS_ADDR_T_64BIT.
This issue was identified with the script ./scripts/checkkconfigsymbols.py.
I then reported it on the mailing list and Paul confirmed the mistake in
the linked email thread.
Link: https://lore.kernel.org/lkml/[email protected]/
Suggested-by: Paul Cercueil <[email protected]>
Fixes: 171543e75272 ("MIPS: Disallow CPU_SUPPORTS_HUGEPAGES for XPA,EVA")
Signed-off-by: Lukas Bulwahn <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/mips/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index db8fe5d7a2377..3442bdd4314cb 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -2150,7 +2150,7 @@ config CPU_SUPPORTS_ADDRWINCFG
bool
config CPU_SUPPORTS_HUGEPAGES
bool
- depends on !(32BIT && (ARCH_PHYS_ADDR_T_64BIT || EVA))
+ depends on !(32BIT && (PHYS_ADDR_T_64BIT || EVA))
config MIPS_PGD_C0_CONTEXT
bool
default y if 64BIT && (CPU_MIPSR2 || CPU_MIPSR6) && !CPU_XLP
--
2.34.1
From: Johannes Berg <[email protected]>
[ Upstream commit 5f8539e2ff962e25b57742ca7106456403abbc94 ]
Many places in the kernel use 'udelay' as an identifier, and
are broken with the current "#define udelay um_udelay". Fix
this by adding an argument to the macro, and do the same to
'ndelay' as well, just in case.
Fixes: 0bc8fb4dda2b ("um: Implement ndelay/udelay in time-travel mode")
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/um/include/asm/delay.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/um/include/asm/delay.h b/arch/um/include/asm/delay.h
index 56fc2b8f2dd01..e79b2ab6f40c8 100644
--- a/arch/um/include/asm/delay.h
+++ b/arch/um/include/asm/delay.h
@@ -14,7 +14,7 @@ static inline void um_ndelay(unsigned long nsecs)
ndelay(nsecs);
}
#undef ndelay
-#define ndelay um_ndelay
+#define ndelay(n) um_ndelay(n)
static inline void um_udelay(unsigned long usecs)
{
@@ -26,5 +26,5 @@ static inline void um_udelay(unsigned long usecs)
udelay(usecs);
}
#undef udelay
-#define udelay um_udelay
+#define udelay(n) um_udelay(n)
#endif /* __UM_DELAY_H */
--
2.34.1
From: Fabio Estevam <[email protected]>
[ Upstream commit 530792efa6cb86f5612ff093333fec735793b582 ]
Since commit cffa4b2122f5 ("regmap: debugfs: Fix a memory leak when
calling regmap_attach_dev"), the following debugfs error is seen
on i.MX boards:
debugfs: Directory 'dummy-iomuxc-gpr@20e0000' with parent 'regmap' already present!
In the attempt to fix the memory leak, the above commit added a NULL check
for map->debugfs_name. For the first debufs entry, map->debugfs_name is NULL
and then the new name is allocated via kasprintf().
For the second debugfs entry, map->debugfs_name() is no longer NULL, so
it will keep using the old entry name and the duplicate name error is seen.
Quoting Mark Brown:
"That means that if the device gets freed we'll end up with the old debugfs
file hanging around pointing at nothing.
...
To be more explicit this means we need a call to regmap_debugfs_exit()
which will clean up all the existing debugfs stuff before we loose
references to it."
Call regmap_debugfs_exit() prior to regmap_debugfs_init() to fix
the problem.
Tested on i.MX6Q and i.MX6SX boards.
Fixes: cffa4b2122f5 ("regmap: debugfs: Fix a memory leak when calling regmap_attach_dev")
Suggested-by: Mark Brown <[email protected]>
Signed-off-by: Fabio Estevam <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/base/regmap/regmap.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/base/regmap/regmap.c b/drivers/base/regmap/regmap.c
index 456a1787e18d0..55a30afc14a00 100644
--- a/drivers/base/regmap/regmap.c
+++ b/drivers/base/regmap/regmap.c
@@ -620,6 +620,7 @@ int regmap_attach_dev(struct device *dev, struct regmap *map,
if (ret)
return ret;
+ regmap_debugfs_exit(map);
regmap_debugfs_init(map);
/* Add a devres resource for dev_get_regmap() */
--
2.34.1
From: Jiasheng Jiang <[email protected]>
[ Upstream commit 3ecb46755eb85456b459a1a9f952c52986bce8ec ]
Because of the potential failure of the ioremap(), the buf->area could
be NULL.
Therefore, we need to check it and return -ENOMEM in order to transfer
the error.
Fixes: f09aecd50f39 ("ASoC: SAMSUNG: Add I2S0 internal dma driver")
Signed-off-by: Jiasheng Jiang <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/samsung/idma.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/sound/soc/samsung/idma.c b/sound/soc/samsung/idma.c
index 66bcc2f97544b..c3f1b054e2389 100644
--- a/sound/soc/samsung/idma.c
+++ b/sound/soc/samsung/idma.c
@@ -360,6 +360,8 @@ static int preallocate_idma_buffer(struct snd_pcm *pcm, int stream)
buf->addr = idma.lp_tx_addr;
buf->bytes = idma_hardware.buffer_bytes_max;
buf->area = (unsigned char * __force)ioremap(buf->addr, buf->bytes);
+ if (!buf->area)
+ return -ENOMEM;
return 0;
}
--
2.34.1
From: Dan Carpenter <[email protected]>
[ Upstream commit dc35616e6c2907b0c0c391a205802d8880f7fd85 ]
This needs to copy an unsigned int from user space instead of a long to
avoid breaking user space with an API change.
I have updated all the integer overflow checks from ULONG to UINT as
well. This is a slight API change but I do not expect it to affect
anything in real life.
Fixes: 3087a6f36ee0 ("netrom: fix copying in user data in nr_setsockopt")
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/netrom/af_netrom.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/net/netrom/af_netrom.c b/net/netrom/af_netrom.c
index eef0e3f2f25b0..e5c8a295e6406 100644
--- a/net/netrom/af_netrom.c
+++ b/net/netrom/af_netrom.c
@@ -298,7 +298,7 @@ static int nr_setsockopt(struct socket *sock, int level, int optname,
{
struct sock *sk = sock->sk;
struct nr_sock *nr = nr_sk(sk);
- unsigned long opt;
+ unsigned int opt;
if (level != SOL_NETROM)
return -ENOPROTOOPT;
@@ -306,18 +306,18 @@ static int nr_setsockopt(struct socket *sock, int level, int optname,
if (optlen < sizeof(unsigned int))
return -EINVAL;
- if (copy_from_sockptr(&opt, optval, sizeof(unsigned long)))
+ if (copy_from_sockptr(&opt, optval, sizeof(opt)))
return -EFAULT;
switch (optname) {
case NETROM_T1:
- if (opt < 1 || opt > ULONG_MAX / HZ)
+ if (opt < 1 || opt > UINT_MAX / HZ)
return -EINVAL;
nr->t1 = opt * HZ;
return 0;
case NETROM_T2:
- if (opt < 1 || opt > ULONG_MAX / HZ)
+ if (opt < 1 || opt > UINT_MAX / HZ)
return -EINVAL;
nr->t2 = opt * HZ;
return 0;
@@ -329,13 +329,13 @@ static int nr_setsockopt(struct socket *sock, int level, int optname,
return 0;
case NETROM_T4:
- if (opt < 1 || opt > ULONG_MAX / HZ)
+ if (opt < 1 || opt > UINT_MAX / HZ)
return -EINVAL;
nr->t4 = opt * HZ;
return 0;
case NETROM_IDLE:
- if (opt > ULONG_MAX / (60 * HZ))
+ if (opt > UINT_MAX / (60 * HZ))
return -EINVAL;
nr->idle = opt * 60 * HZ;
return 0;
--
2.34.1
From: Jiasheng Jiang <[email protected]>
[ Upstream commit 1c1348bf056dee665760a3bd1cd30b0be7554fc2 ]
The return value of platform_get_resource() needs to be checked.
To avoid use of error pointer in case that there is no suitable
resource.
Fixes: d28c74c10751 ("power: reset: add driver for mt6323 poweroff")
Signed-off-by: Jiasheng Jiang <[email protected]>
Signed-off-by: Sebastian Reichel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/power/reset/mt6323-poweroff.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/power/reset/mt6323-poweroff.c b/drivers/power/reset/mt6323-poweroff.c
index 0532803e6cbc4..d90e76fcb9383 100644
--- a/drivers/power/reset/mt6323-poweroff.c
+++ b/drivers/power/reset/mt6323-poweroff.c
@@ -57,6 +57,9 @@ static int mt6323_pwrc_probe(struct platform_device *pdev)
return -ENOMEM;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -EINVAL;
+
pwrc->base = res->start;
pwrc->regmap = mt6397_chip->regmap;
pwrc->dev = &pdev->dev;
--
2.34.1
From: Mauro Carvalho Chehab <[email protected]>
[ Upstream commit 58043dbf6d1ae9deab4f5aa1e039c70112017682 ]
The succ var tracks memory allocation erros on this function.
Fix it, in order to stop this W=1 Werror in clang:
drivers/staging/media/atomisp/pci/sh_css_params.c:2430:7: error: variable 'succ' set but not used [-Werror,-Wunused-but-set-variable]
bool succ = true;
^
Reviewed-by: Nathan Chancellor <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/staging/media/atomisp/pci/sh_css_params.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/staging/media/atomisp/pci/sh_css_params.c b/drivers/staging/media/atomisp/pci/sh_css_params.c
index 24fc497bd4915..8d6514c45eeb6 100644
--- a/drivers/staging/media/atomisp/pci/sh_css_params.c
+++ b/drivers/staging/media/atomisp/pci/sh_css_params.c
@@ -2437,7 +2437,7 @@ sh_css_create_isp_params(struct ia_css_stream *stream,
unsigned int i;
struct sh_css_ddr_address_map *ddr_ptrs;
struct sh_css_ddr_address_map_size *ddr_ptrs_size;
- int err = 0;
+ int err;
size_t params_size;
struct ia_css_isp_parameters *params =
kvmalloc(sizeof(struct ia_css_isp_parameters), GFP_KERNEL);
@@ -2482,7 +2482,11 @@ sh_css_create_isp_params(struct ia_css_stream *stream,
succ &= (ddr_ptrs->macc_tbl != mmgr_NULL);
*isp_params_out = params;
- return err;
+
+ if (!succ)
+ return -ENOMEM;
+
+ return 0;
}
static bool
--
2.34.1
From: Linus Lüssing <[email protected]>
[ Upstream commit 9057d6c23e7388ee9d037fccc9a7bc8557ce277b ]
Currently, creating a batman-adv interface in an unprivileged LXD
container and attaching secondary interfaces to it with "ip" or "batctl"
works fine. However all batctl debug and configuration commands
fail:
root@container:~# batctl originators
Error received: Operation not permitted
root@container:~# batctl orig_interval
1000
root@container:~# batctl orig_interval 2000
root@container:~# batctl orig_interval
1000
To fix this change the generic netlink permissions from GENL_ADMIN_PERM
to GENL_UNS_ADMIN_PERM. This way a batman-adv interface is fully
maintainable as root from within a user namespace, from an unprivileged
container.
All except one batman-adv netlink setting are per interface and do not
leak information or change settings from the host system and are
therefore save to retrieve or modify as root from within an unprivileged
container.
"batctl routing_algo" / BATADV_CMD_GET_ROUTING_ALGOS is the only
exception: It provides the batman-adv kernel module wide default routing
algorithm. However it is read-only from netlink and an unprivileged
container is still not allowed to modify
/sys/module/batman_adv/parameters/routing_algo. Instead it is advised to
use the newly introduced "batctl if create routing_algo RA_NAME" /
IFLA_BATADV_ALGO_NAME to set the routing algorithm on interface
creation, which already works fine in an unprivileged container.
Cc: Tycho Andersen <[email protected]>
Signed-off-by: Linus Lüssing <[email protected]>
Signed-off-by: Sven Eckelmann <[email protected]>
Signed-off-by: Simon Wunderlich <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/batman-adv/netlink.c | 30 +++++++++++++++---------------
1 file changed, 15 insertions(+), 15 deletions(-)
diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c
index c7a55647b520e..121459704b069 100644
--- a/net/batman-adv/netlink.c
+++ b/net/batman-adv/netlink.c
@@ -1361,21 +1361,21 @@ static const struct genl_small_ops batadv_netlink_ops[] = {
{
.cmd = BATADV_CMD_TP_METER,
.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
- .flags = GENL_ADMIN_PERM,
+ .flags = GENL_UNS_ADMIN_PERM,
.doit = batadv_netlink_tp_meter_start,
.internal_flags = BATADV_FLAG_NEED_MESH,
},
{
.cmd = BATADV_CMD_TP_METER_CANCEL,
.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
- .flags = GENL_ADMIN_PERM,
+ .flags = GENL_UNS_ADMIN_PERM,
.doit = batadv_netlink_tp_meter_cancel,
.internal_flags = BATADV_FLAG_NEED_MESH,
},
{
.cmd = BATADV_CMD_GET_ROUTING_ALGOS,
.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
- .flags = GENL_ADMIN_PERM,
+ .flags = GENL_UNS_ADMIN_PERM,
.dumpit = batadv_algo_dump,
},
{
@@ -1390,68 +1390,68 @@ static const struct genl_small_ops batadv_netlink_ops[] = {
{
.cmd = BATADV_CMD_GET_TRANSTABLE_LOCAL,
.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
- .flags = GENL_ADMIN_PERM,
+ .flags = GENL_UNS_ADMIN_PERM,
.dumpit = batadv_tt_local_dump,
},
{
.cmd = BATADV_CMD_GET_TRANSTABLE_GLOBAL,
.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
- .flags = GENL_ADMIN_PERM,
+ .flags = GENL_UNS_ADMIN_PERM,
.dumpit = batadv_tt_global_dump,
},
{
.cmd = BATADV_CMD_GET_ORIGINATORS,
.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
- .flags = GENL_ADMIN_PERM,
+ .flags = GENL_UNS_ADMIN_PERM,
.dumpit = batadv_orig_dump,
},
{
.cmd = BATADV_CMD_GET_NEIGHBORS,
.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
- .flags = GENL_ADMIN_PERM,
+ .flags = GENL_UNS_ADMIN_PERM,
.dumpit = batadv_hardif_neigh_dump,
},
{
.cmd = BATADV_CMD_GET_GATEWAYS,
.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
- .flags = GENL_ADMIN_PERM,
+ .flags = GENL_UNS_ADMIN_PERM,
.dumpit = batadv_gw_dump,
},
{
.cmd = BATADV_CMD_GET_BLA_CLAIM,
.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
- .flags = GENL_ADMIN_PERM,
+ .flags = GENL_UNS_ADMIN_PERM,
.dumpit = batadv_bla_claim_dump,
},
{
.cmd = BATADV_CMD_GET_BLA_BACKBONE,
.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
- .flags = GENL_ADMIN_PERM,
+ .flags = GENL_UNS_ADMIN_PERM,
.dumpit = batadv_bla_backbone_dump,
},
{
.cmd = BATADV_CMD_GET_DAT_CACHE,
.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
- .flags = GENL_ADMIN_PERM,
+ .flags = GENL_UNS_ADMIN_PERM,
.dumpit = batadv_dat_cache_dump,
},
{
.cmd = BATADV_CMD_GET_MCAST_FLAGS,
.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
- .flags = GENL_ADMIN_PERM,
+ .flags = GENL_UNS_ADMIN_PERM,
.dumpit = batadv_mcast_flags_dump,
},
{
.cmd = BATADV_CMD_SET_MESH,
.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
- .flags = GENL_ADMIN_PERM,
+ .flags = GENL_UNS_ADMIN_PERM,
.doit = batadv_netlink_set_mesh,
.internal_flags = BATADV_FLAG_NEED_MESH,
},
{
.cmd = BATADV_CMD_SET_HARDIF,
.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
- .flags = GENL_ADMIN_PERM,
+ .flags = GENL_UNS_ADMIN_PERM,
.doit = batadv_netlink_set_hardif,
.internal_flags = BATADV_FLAG_NEED_MESH |
BATADV_FLAG_NEED_HARDIF,
@@ -1467,7 +1467,7 @@ static const struct genl_small_ops batadv_netlink_ops[] = {
{
.cmd = BATADV_CMD_SET_VLAN,
.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
- .flags = GENL_ADMIN_PERM,
+ .flags = GENL_UNS_ADMIN_PERM,
.doit = batadv_netlink_set_vlan,
.internal_flags = BATADV_FLAG_NEED_MESH |
BATADV_FLAG_NEED_VLAN,
--
2.34.1
From: Marijn Suijten <[email protected]>
[ Upstream commit c05b21ebc5bce3ecc78c2c71afd76d92c790a2ac ]
The strings passed in DT may possibly cause out-of-bounds register
accesses and should be validated before use.
Fixes: 775d2ffb4af6 ("backlight: qcom-wled: Restructure the driver for WLED3")
Signed-off-by: Marijn Suijten <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Reviewed-by: Daniel Thompson <[email protected]>
Signed-off-by: Lee Jones <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/video/backlight/qcom-wled.c | 18 +++++++++++++++++-
1 file changed, 17 insertions(+), 1 deletion(-)
diff --git a/drivers/video/backlight/qcom-wled.c b/drivers/video/backlight/qcom-wled.c
index cd11c57764381..2c4290f082025 100644
--- a/drivers/video/backlight/qcom-wled.c
+++ b/drivers/video/backlight/qcom-wled.c
@@ -1528,12 +1528,28 @@ static int wled_configure(struct wled *wled)
string_len = of_property_count_elems_of_size(dev->of_node,
"qcom,enabled-strings",
sizeof(u32));
- if (string_len > 0)
+ if (string_len > 0) {
+ if (string_len > wled->max_string_count) {
+ dev_err(dev, "Cannot have more than %d strings\n",
+ wled->max_string_count);
+ return -EINVAL;
+ }
+
of_property_read_u32_array(dev->of_node,
"qcom,enabled-strings",
wled->cfg.enabled_strings,
sizeof(u32));
+ for (i = 0; i < string_len; ++i) {
+ if (wled->cfg.enabled_strings[i] >= wled->max_string_count) {
+ dev_err(dev,
+ "qcom,enabled-strings index %d at %d is out of bounds\n",
+ wled->cfg.enabled_strings[i], i);
+ return -EINVAL;
+ }
+ }
+ }
+
return 0;
}
--
2.34.1
From: Marijn Suijten <[email protected]>
[ Upstream commit e29e24bdabfeddbf8b1a4ecac1af439a85150438 ]
of_property_read_u32_array takes the number of elements to read as last
argument. This does not always need to be 4 (sizeof(u32)) but should
instead be the size of the array in DT as read just above with
of_property_count_elems_of_size.
To not make such an error go unnoticed again the driver now bails
accordingly when of_property_read_u32_array returns an error.
Surprisingly the indentation of newlined arguments is lining up again
after prepending `rc = `.
Fixes: 775d2ffb4af6 ("backlight: qcom-wled: Restructure the driver for WLED3")
Signed-off-by: Marijn Suijten <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Reviewed-by: Daniel Thompson <[email protected]>
Signed-off-by: Lee Jones <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/video/backlight/qcom-wled.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/video/backlight/qcom-wled.c b/drivers/video/backlight/qcom-wled.c
index 2c4290f082025..92df5a9f6ae51 100644
--- a/drivers/video/backlight/qcom-wled.c
+++ b/drivers/video/backlight/qcom-wled.c
@@ -1535,10 +1535,15 @@ static int wled_configure(struct wled *wled)
return -EINVAL;
}
- of_property_read_u32_array(dev->of_node,
+ rc = of_property_read_u32_array(dev->of_node,
"qcom,enabled-strings",
wled->cfg.enabled_strings,
- sizeof(u32));
+ string_len);
+ if (rc) {
+ dev_err(dev, "Failed to read %d elements from qcom,enabled-strings: %d\n",
+ string_len, rc);
+ return rc;
+ }
for (i = 0; i < string_len; ++i) {
if (wled->cfg.enabled_strings[i] >= wled->max_string_count) {
--
2.34.1
From: Jiasheng Jiang <[email protected]>
[ Upstream commit b38cd3b42fba66cc538edb9cf77e07881f43f8e2 ]
For the possible failure of the platform_get_irq(), the returned irq
could be error number and will finally cause the failure of the
request_irq().
Consider that platform_get_irq() can now in certain cases return
-EPROBE_DEFER, and the consequences of letting request_irq() effectively
convert that into -EINVAL, even at probe time rather than later on.
So it might be better to check just now.
Fixes: 0395ffc1ee05 ("Bluetooth: hci_bcm: Add PM for BCM devices")
Signed-off-by: Jiasheng Jiang <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/bluetooth/hci_bcm.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/bluetooth/hci_bcm.c b/drivers/bluetooth/hci_bcm.c
index 8ea5ca8d71d6d..259a643377c24 100644
--- a/drivers/bluetooth/hci_bcm.c
+++ b/drivers/bluetooth/hci_bcm.c
@@ -1164,7 +1164,12 @@ static int bcm_probe(struct platform_device *pdev)
return -ENOMEM;
dev->dev = &pdev->dev;
- dev->irq = platform_get_irq(pdev, 0);
+
+ ret = platform_get_irq(pdev, 0);
+ if (ret < 0)
+ return ret;
+
+ dev->irq = ret;
/* Initialize routing field to an unused value */
dev->pcm_int_params[0] = 0xff;
--
2.34.1
From: Johannes Berg <[email protected]>
[ Upstream commit 85e73968a040c642fd38f6cba5b73b61f5d0f052 ]
When creating an external event, the current time needs to
be propagated to other participants of a simulation. This
is done in the places here where we kick a virtq etc.
However, it must be done for _all_ external events, and
that includes making the initial socket connection and
later closing it. Call time_travel_propagate_time() to do
this before making or closing the socket connection.
Apparently, at least for the initial connection creation,
due to the remote side in my use cases using microseconds
(rather than nanoseconds), this wasn't a problem yet; only
started failing between 5.14-rc1 and 5.15-rc1 (didn't test
others much), or possibly depending on the configuration,
where more delays happen before the virtio devices are
initialized.
Fixes: 88ce64249233 ("um: Implement time-travel=ext")
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/um/drivers/virtio_uml.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/um/drivers/virtio_uml.c b/arch/um/drivers/virtio_uml.c
index d11b3d41c3785..d5d768188b3ba 100644
--- a/arch/um/drivers/virtio_uml.c
+++ b/arch/um/drivers/virtio_uml.c
@@ -1076,6 +1076,8 @@ static void virtio_uml_release_dev(struct device *d)
container_of(d, struct virtio_device, dev);
struct virtio_uml_device *vu_dev = to_virtio_uml_device(vdev);
+ time_travel_propagate_time();
+
/* might not have been opened due to not negotiating the feature */
if (vu_dev->req_fd >= 0) {
um_free_irq(VIRTIO_IRQ, vu_dev);
@@ -1109,6 +1111,8 @@ static int virtio_uml_probe(struct platform_device *pdev)
vu_dev->pdev = pdev;
vu_dev->req_fd = -1;
+ time_travel_propagate_time();
+
do {
rc = os_connect_socket(pdata->socket_path);
} while (rc == -EINTR);
--
2.34.1
From: Frank Rowand <[email protected]>
[ Upstream commit 9fd4cf5d3571b27d746b8ead494a3f051485b679 ]
If an architecture does not support 64 bit dma addresses then testing
for an expected dma address >= 0x100000000 will fail.
Fixes: e0d072782c73 ("dma-mapping: introduce DMA range map, supplanting dma_pfn_offset")
Signed-off-by: Frank Rowand <[email protected]>
Signed-off-by: Rob Herring <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/of/unittest.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/of/unittest.c b/drivers/of/unittest.c
index a5c4c77b6f3e2..5407bbdb64395 100644
--- a/drivers/of/unittest.c
+++ b/drivers/of/unittest.c
@@ -941,8 +941,9 @@ static void __init of_unittest_parse_dma_ranges(void)
{
of_unittest_dma_ranges_one("/testcase-data/address-tests/device@70000000",
0x0, 0x20000000);
- of_unittest_dma_ranges_one("/testcase-data/address-tests/bus@80000000/device@1000",
- 0x100000000, 0x20000000);
+ if (IS_ENABLED(CONFIG_ARCH_DMA_ADDR_T_64BIT))
+ of_unittest_dma_ranges_one("/testcase-data/address-tests/bus@80000000/device@1000",
+ 0x100000000, 0x20000000);
of_unittest_dma_ranges_one("/testcase-data/address-tests/pci@90000000",
0x80000000, 0x20000000);
}
--
2.34.1
From: Lukas Bulwahn <[email protected]>
[ Upstream commit fd4eb90b164442cb1e9909f7845e12a0835ac699 ]
Commit ab7c01fdc3cf ("mips: Add MIPS Release 5 support") adds the two
configs CPU_MIPS32_R5 and CPU_MIPS64_R5, which depend on the corresponding
SYS_HAS_CPU_MIPS32_R5 and SYS_HAS_CPU_MIPS64_R5, respectively.
The config SYS_HAS_CPU_MIPS32_R5 was already introduced with commit
c5b367835cfc ("MIPS: Add support for XPA."); the config
SYS_HAS_CPU_MIPS64_R5, however, was never introduced.
Hence, ./scripts/checkkconfigsymbols.py warns:
SYS_HAS_CPU_MIPS64_R5
Referencing files: arch/mips/Kconfig, arch/mips/include/asm/cpu-type.h
Add the definition for config SYS_HAS_CPU_MIPS64_R5 under the assumption
that SYS_HAS_CPU_MIPS64_R5 follows the same pattern as the existing
SYS_HAS_CPU_MIPS32_R5 and SYS_HAS_CPU_MIPS64_R6.
Fixes: ab7c01fdc3cf ("mips: Add MIPS Release 5 support")
Signed-off-by: Lukas Bulwahn <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/mips/Kconfig | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 23d756fe0fd6c..db8fe5d7a2377 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -1985,6 +1985,10 @@ config SYS_HAS_CPU_MIPS64_R1
config SYS_HAS_CPU_MIPS64_R2
bool
+config SYS_HAS_CPU_MIPS64_R5
+ bool
+ select ARCH_HAS_SYNC_DMA_FOR_CPU if DMA_NONCOHERENT
+
config SYS_HAS_CPU_MIPS64_R6
bool
select ARCH_HAS_SYNC_DMA_FOR_CPU if DMA_NONCOHERENT
--
2.34.1
From: Bernard Zhao <[email protected]>
[ Upstream commit 2e08df3c7c4e4e74e3dd5104c100f0bf6288aaa8 ]
This patch try to fix potential memleak in error branch.
Fixes: ba6418623385 ("selinux: new helper - selinux_add_opt()")
Signed-off-by: Bernard Zhao <[email protected]>
[PM: tweak the subject line, add Fixes tag]
Signed-off-by: Paul Moore <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
security/selinux/hooks.c | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c
index ff2191ae53528..86159b32921cc 100644
--- a/security/selinux/hooks.c
+++ b/security/selinux/hooks.c
@@ -947,18 +947,22 @@ out:
static int selinux_add_opt(int token, const char *s, void **mnt_opts)
{
struct selinux_mnt_opts *opts = *mnt_opts;
+ bool is_alloc_opts = false;
if (token == Opt_seclabel) /* eaten and completely ignored */
return 0;
+ if (!s)
+ return -ENOMEM;
+
if (!opts) {
opts = kzalloc(sizeof(struct selinux_mnt_opts), GFP_KERNEL);
if (!opts)
return -ENOMEM;
*mnt_opts = opts;
+ is_alloc_opts = true;
}
- if (!s)
- return -ENOMEM;
+
switch (token) {
case Opt_context:
if (opts->context || opts->defcontext)
@@ -983,6 +987,10 @@ static int selinux_add_opt(int token, const char *s, void **mnt_opts)
}
return 0;
Einval:
+ if (is_alloc_opts) {
+ kfree(opts);
+ *mnt_opts = NULL;
+ }
pr_warn(SEL_MOUNT_FAIL_MSG);
return -EINVAL;
}
--
2.34.1
From: Mauro Carvalho Chehab <[email protected]>
[ Upstream commit c9e9094c4e42124af909b2f5f6ded0498e0854ac ]
The internal try_fmt logic is not meant to provide everything
that the V4L2 API should provide. Also, it doesn't decrement
the pads that are used only internally by the driver, but aren't
part of the device's output.
Fix it.
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../staging/media/atomisp/pci/atomisp_ioctl.c | 72 ++++++++++++++++++-
1 file changed, 71 insertions(+), 1 deletion(-)
diff --git a/drivers/staging/media/atomisp/pci/atomisp_ioctl.c b/drivers/staging/media/atomisp/pci/atomisp_ioctl.c
index 830df02626634..8a0648fd7c813 100644
--- a/drivers/staging/media/atomisp/pci/atomisp_ioctl.c
+++ b/drivers/staging/media/atomisp/pci/atomisp_ioctl.c
@@ -863,6 +863,72 @@ static int atomisp_g_fmt_file(struct file *file, void *fh,
return 0;
}
+static int atomisp_adjust_fmt(struct v4l2_format *f)
+{
+ const struct atomisp_format_bridge *format_bridge;
+ u32 padded_width;
+
+ format_bridge = atomisp_get_format_bridge(f->fmt.pix.pixelformat);
+
+ padded_width = f->fmt.pix.width + pad_w;
+
+ if (format_bridge->planar) {
+ f->fmt.pix.bytesperline = padded_width;
+ f->fmt.pix.sizeimage = PAGE_ALIGN(f->fmt.pix.height *
+ DIV_ROUND_UP(format_bridge->depth *
+ padded_width, 8));
+ } else {
+ f->fmt.pix.bytesperline = DIV_ROUND_UP(format_bridge->depth *
+ padded_width, 8);
+ f->fmt.pix.sizeimage = PAGE_ALIGN(f->fmt.pix.height * f->fmt.pix.bytesperline);
+ }
+
+ if (f->fmt.pix.field == V4L2_FIELD_ANY)
+ f->fmt.pix.field = V4L2_FIELD_NONE;
+
+ format_bridge = atomisp_get_format_bridge(f->fmt.pix.pixelformat);
+ if (!format_bridge)
+ return -EINVAL;
+
+ /* Currently, raw formats are broken!!! */
+ if (format_bridge->sh_fmt == IA_CSS_FRAME_FORMAT_RAW) {
+ f->fmt.pix.pixelformat = V4L2_PIX_FMT_YUV420;
+
+ format_bridge = atomisp_get_format_bridge(f->fmt.pix.pixelformat);
+ if (!format_bridge)
+ return -EINVAL;
+ }
+
+ padded_width = f->fmt.pix.width + pad_w;
+
+ if (format_bridge->planar) {
+ f->fmt.pix.bytesperline = padded_width;
+ f->fmt.pix.sizeimage = PAGE_ALIGN(f->fmt.pix.height *
+ DIV_ROUND_UP(format_bridge->depth *
+ padded_width, 8));
+ } else {
+ f->fmt.pix.bytesperline = DIV_ROUND_UP(format_bridge->depth *
+ padded_width, 8);
+ f->fmt.pix.sizeimage = PAGE_ALIGN(f->fmt.pix.height * f->fmt.pix.bytesperline);
+ }
+
+ if (f->fmt.pix.field == V4L2_FIELD_ANY)
+ f->fmt.pix.field = V4L2_FIELD_NONE;
+
+ /*
+ * FIXME: do we need to setup this differently, depending on the
+ * sensor or the pipeline?
+ */
+ f->fmt.pix.colorspace = V4L2_COLORSPACE_REC709;
+ f->fmt.pix.ycbcr_enc = V4L2_YCBCR_ENC_709;
+ f->fmt.pix.xfer_func = V4L2_XFER_FUNC_709;
+
+ f->fmt.pix.width -= pad_w;
+ f->fmt.pix.height -= pad_h;
+
+ return 0;
+}
+
/* This function looks up the closest available resolution. */
static int atomisp_try_fmt_cap(struct file *file, void *fh,
struct v4l2_format *f)
@@ -874,7 +940,11 @@ static int atomisp_try_fmt_cap(struct file *file, void *fh,
rt_mutex_lock(&isp->mutex);
ret = atomisp_try_fmt(vdev, f, NULL);
rt_mutex_unlock(&isp->mutex);
- return ret;
+
+ if (ret)
+ return ret;
+
+ return atomisp_adjust_fmt(f);
}
static int atomisp_s_fmt_cap(struct file *file, void *fh,
--
2.34.1
From: Alyssa Ross <[email protected]>
[ Upstream commit 9f3d45318dd9e739ed62e4218839a7a824d3cced ]
modprobe can't handle spaces in aliases.
Fixes: 9e28f6532c61 ("ASoC: fsl_mqs: Add MQS component driver")
Signed-off-by: Alyssa Ross <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/fsl/fsl_mqs.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sound/soc/fsl/fsl_mqs.c b/sound/soc/fsl/fsl_mqs.c
index 69aeb0e71844d..0d4efbed41dab 100644
--- a/sound/soc/fsl/fsl_mqs.c
+++ b/sound/soc/fsl/fsl_mqs.c
@@ -337,4 +337,4 @@ module_platform_driver(fsl_mqs_driver);
MODULE_AUTHOR("Shengjiu Wang <[email protected]>");
MODULE_DESCRIPTION("MQS codec driver");
MODULE_LICENSE("GPL v2");
-MODULE_ALIAS("platform: fsl-mqs");
+MODULE_ALIAS("platform:fsl-mqs");
--
2.34.1
From: Shengjiu Wang <[email protected]>
[ Upstream commit 320386343451ab6a3577e0ee200dac56a6182944 ]
According to RM, the clock divider range is from 1 to 8, clock
prescaling ratio may be any power of 2 from 1 to 128.
So the supported divider is not all the value between
1 and 1024, just limited value in that range.
Create table for the supported divder and add function to
check the clock divider is available by comparing with
the table.
Fixes: d0250cf4f2ab ("ASoC: fsl_asrc: Add an option to select internal ratio mode")
Signed-off-by: Shengjiu Wang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/fsl/fsl_asrc.c | 69 +++++++++++++++++++++++++++++++++-------
1 file changed, 58 insertions(+), 11 deletions(-)
diff --git a/sound/soc/fsl/fsl_asrc.c b/sound/soc/fsl/fsl_asrc.c
index 02c81d2e34ad0..5e3c71f025f45 100644
--- a/sound/soc/fsl/fsl_asrc.c
+++ b/sound/soc/fsl/fsl_asrc.c
@@ -19,6 +19,7 @@
#include "fsl_asrc.h"
#define IDEAL_RATIO_DECIMAL_DEPTH 26
+#define DIVIDER_NUM 64
#define pair_err(fmt, ...) \
dev_err(&asrc->pdev->dev, "Pair %c: " fmt, 'A' + index, ##__VA_ARGS__)
@@ -101,6 +102,55 @@ static unsigned char clk_map_imx8qxp[2][ASRC_CLK_MAP_LEN] = {
},
};
+/*
+ * According to RM, the divider range is 1 ~ 8,
+ * prescaler is power of 2 from 1 ~ 128.
+ */
+static int asrc_clk_divider[DIVIDER_NUM] = {
+ 1, 2, 4, 8, 16, 32, 64, 128, /* divider = 1 */
+ 2, 4, 8, 16, 32, 64, 128, 256, /* divider = 2 */
+ 3, 6, 12, 24, 48, 96, 192, 384, /* divider = 3 */
+ 4, 8, 16, 32, 64, 128, 256, 512, /* divider = 4 */
+ 5, 10, 20, 40, 80, 160, 320, 640, /* divider = 5 */
+ 6, 12, 24, 48, 96, 192, 384, 768, /* divider = 6 */
+ 7, 14, 28, 56, 112, 224, 448, 896, /* divider = 7 */
+ 8, 16, 32, 64, 128, 256, 512, 1024, /* divider = 8 */
+};
+
+/*
+ * Check if the divider is available for internal ratio mode
+ */
+static bool fsl_asrc_divider_avail(int clk_rate, int rate, int *div)
+{
+ u32 rem, i;
+ u64 n;
+
+ if (div)
+ *div = 0;
+
+ if (clk_rate == 0 || rate == 0)
+ return false;
+
+ n = clk_rate;
+ rem = do_div(n, rate);
+
+ if (div)
+ *div = n;
+
+ if (rem != 0)
+ return false;
+
+ for (i = 0; i < DIVIDER_NUM; i++) {
+ if (n == asrc_clk_divider[i])
+ break;
+ }
+
+ if (i == DIVIDER_NUM)
+ return false;
+
+ return true;
+}
+
/**
* fsl_asrc_sel_proc - Select the pre-processing and post-processing options
* @inrate: input sample rate
@@ -330,12 +380,12 @@ static int fsl_asrc_config_pair(struct fsl_asrc_pair *pair, bool use_ideal_rate)
enum asrc_word_width input_word_width;
enum asrc_word_width output_word_width;
u32 inrate, outrate, indiv, outdiv;
- u32 clk_index[2], div[2], rem[2];
+ u32 clk_index[2], div[2];
u64 clk_rate;
int in, out, channels;
int pre_proc, post_proc;
struct clk *clk;
- bool ideal;
+ bool ideal, div_avail;
if (!config) {
pair_err("invalid pair config\n");
@@ -415,8 +465,7 @@ static int fsl_asrc_config_pair(struct fsl_asrc_pair *pair, bool use_ideal_rate)
clk = asrc_priv->asrck_clk[clk_index[ideal ? OUT : IN]];
clk_rate = clk_get_rate(clk);
- rem[IN] = do_div(clk_rate, inrate);
- div[IN] = (u32)clk_rate;
+ div_avail = fsl_asrc_divider_avail(clk_rate, inrate, &div[IN]);
/*
* The divider range is [1, 1024], defined by the hardware. For non-
@@ -425,7 +474,7 @@ static int fsl_asrc_config_pair(struct fsl_asrc_pair *pair, bool use_ideal_rate)
* only result in different converting speeds. So remainder does not
* matter, as long as we keep the divider within its valid range.
*/
- if (div[IN] == 0 || (!ideal && (div[IN] > 1024 || rem[IN] != 0))) {
+ if (div[IN] == 0 || (!ideal && !div_avail)) {
pair_err("failed to support input sample rate %dHz by asrck_%x\n",
inrate, clk_index[ideal ? OUT : IN]);
return -EINVAL;
@@ -436,13 +485,12 @@ static int fsl_asrc_config_pair(struct fsl_asrc_pair *pair, bool use_ideal_rate)
clk = asrc_priv->asrck_clk[clk_index[OUT]];
clk_rate = clk_get_rate(clk);
if (ideal && use_ideal_rate)
- rem[OUT] = do_div(clk_rate, IDEAL_RATIO_RATE);
+ div_avail = fsl_asrc_divider_avail(clk_rate, IDEAL_RATIO_RATE, &div[OUT]);
else
- rem[OUT] = do_div(clk_rate, outrate);
- div[OUT] = clk_rate;
+ div_avail = fsl_asrc_divider_avail(clk_rate, outrate, &div[OUT]);
/* Output divider has the same limitation as the input one */
- if (div[OUT] == 0 || (!ideal && (div[OUT] > 1024 || rem[OUT] != 0))) {
+ if (div[OUT] == 0 || (!ideal && !div_avail)) {
pair_err("failed to support output sample rate %dHz by asrck_%x\n",
outrate, clk_index[OUT]);
return -EINVAL;
@@ -621,8 +669,7 @@ static void fsl_asrc_select_clk(struct fsl_asrc_priv *asrc_priv,
clk_index = asrc_priv->clk_map[j][i];
clk_rate = clk_get_rate(asrc_priv->asrck_clk[clk_index]);
/* Only match a perfect clock source with no remainder */
- if (clk_rate != 0 && (clk_rate / rate[j]) <= 1024 &&
- (clk_rate % rate[j]) == 0)
+ if (fsl_asrc_divider_avail(clk_rate, rate[j], NULL))
break;
}
--
2.34.1
From: José Expósito <[email protected]>
[ Upstream commit a5fe7864d8ada170f19cc47d176bf8260ffb4263 ]
When a keyboard without a function key is detected, instead of removing
all quirks, remove only the APPLE_HAS_FN quirk.
Signed-off-by: José Expósito <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hid/hid-apple.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/hid/hid-apple.c b/drivers/hid/hid-apple.c
index 5c1d33cda863b..e5d2e7e9541b8 100644
--- a/drivers/hid/hid-apple.c
+++ b/drivers/hid/hid-apple.c
@@ -415,7 +415,7 @@ static int apple_input_configured(struct hid_device *hdev,
if ((asc->quirks & APPLE_HAS_FN) && !asc->fn_found) {
hid_info(hdev, "Fn key not found (Apple Wireless Keyboard clone?), disabling Fn key handling\n");
- asc->quirks = 0;
+ asc->quirks &= ~APPLE_HAS_FN;
}
return 0;
--
2.34.1
From: Neal Liu <[email protected]>
[ Upstream commit 554abfe2eadec97d12c71d4a69da1518478f69eb ]
Enable ast2600 uhci quirks.
Signed-off-by: Neal Liu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/host/uhci-platform.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/host/uhci-platform.c b/drivers/usb/host/uhci-platform.c
index 70dbd95c3f063..be9e9db7cad10 100644
--- a/drivers/usb/host/uhci-platform.c
+++ b/drivers/usb/host/uhci-platform.c
@@ -113,7 +113,8 @@ static int uhci_hcd_platform_probe(struct platform_device *pdev)
num_ports);
}
if (of_device_is_compatible(np, "aspeed,ast2400-uhci") ||
- of_device_is_compatible(np, "aspeed,ast2500-uhci")) {
+ of_device_is_compatible(np, "aspeed,ast2500-uhci") ||
+ of_device_is_compatible(np, "aspeed,ast2600-uhci")) {
uhci->is_aspeed = 1;
dev_info(&pdev->dev,
"Enabled Aspeed implementation workarounds\n");
--
2.34.1
From: Robert Marko <[email protected]>
[ Upstream commit 0734f8311ce72c9041e5142769eff2083889c172 ]
CN9130 has a built-in CP115 which has 2 GPIO controllers, but unlike in
Armada 7k and 8k both are left disabled by the SoC DTSI.
This first of all makes no sense as they are always present due to being
SoC built-in and its an issue as boards like CN9130-CRB use the CPO GPIO2
pins for regulators and SD card support without enabling them first.
So, enable both of them like Armada 7k and 8k do.
Fixes: 6b8970bd8d7a ("arm64: dts: marvell: Add support for Marvell CN9130 SoC support")
Signed-off-by: Robert Marko <[email protected]>
Signed-off-by: Gregory CLEMENT <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/marvell/cn9130.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm64/boot/dts/marvell/cn9130.dtsi b/arch/arm64/boot/dts/marvell/cn9130.dtsi
index 71769ac7f0585..327b04134134f 100644
--- a/arch/arm64/boot/dts/marvell/cn9130.dtsi
+++ b/arch/arm64/boot/dts/marvell/cn9130.dtsi
@@ -42,3 +42,11 @@
#undef CP11X_PCIE0_BASE
#undef CP11X_PCIE1_BASE
#undef CP11X_PCIE2_BASE
+
+&cp0_gpio1 {
+ status = "okay";
+};
+
+&cp0_gpio2 {
+ status = "okay";
+};
--
2.34.1
From: Xiongwei Song <[email protected]>
[ Upstream commit 545a32498c536ee152331cd2e7d2416aa0f20e01 ]
We need to check the max request size that is from user space before
allocating pages. If the request size exceeds the limit, return -EINVAL.
This check can avoid the warning below from page allocator.
WARNING: CPU: 3 PID: 16525 at mm/page_alloc.c:5344 current_gfp_context include/linux/sched/mm.h:195 [inline]
WARNING: CPU: 3 PID: 16525 at mm/page_alloc.c:5344 __alloc_pages+0x45d/0x500 mm/page_alloc.c:5356
Modules linked in:
CPU: 3 PID: 16525 Comm: syz-executor.3 Not tainted 5.15.0-syzkaller #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014
RIP: 0010:__alloc_pages+0x45d/0x500 mm/page_alloc.c:5344
Code: be c9 00 00 00 48 c7 c7 20 4a 97 89 c6 05 62 32 a7 0b 01 e8 74 9a 42 07 e9 6a ff ff ff 0f 0b e9 a0 fd ff ff 40 80 e5 3f eb 88 <0f> 0b e9 18 ff ff ff 4c 89 ef 44 89 e6 45 31 ed e8 1e 76 ff ff e9
RSP: 0018:ffffc90023b87850 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 1ffff92004770f0b RCX: dffffc0000000000
RDX: 0000000000000000 RSI: 0000000000000033 RDI: 0000000000010cc1
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000001
R10: ffffffff81bb4686 R11: 0000000000000001 R12: ffffffff902c1960
R13: 0000000000000033 R14: 0000000000000000 R15: ffff88804cf64a30
FS: 0000000000000000(0000) GS:ffff88802cd00000(0063) knlGS:00000000f44b4b40
CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033
CR2: 000000002c921000 CR3: 000000004f507000 CR4: 0000000000150ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
alloc_pages+0x1a7/0x300 mm/mempolicy.c:2191
__get_free_pages+0x8/0x40 mm/page_alloc.c:5418
raw_cmd_copyin drivers/block/floppy.c:3113 [inline]
raw_cmd_ioctl drivers/block/floppy.c:3160 [inline]
fd_locked_ioctl+0x12e5/0x2820 drivers/block/floppy.c:3528
fd_ioctl drivers/block/floppy.c:3555 [inline]
fd_compat_ioctl+0x891/0x1b60 drivers/block/floppy.c:3869
compat_blkdev_ioctl+0x3b8/0x810 block/ioctl.c:662
__do_compat_sys_ioctl+0x1c7/0x290 fs/ioctl.c:972
do_syscall_32_irqs_on arch/x86/entry/common.c:112 [inline]
__do_fast_syscall_32+0x65/0xf0 arch/x86/entry/common.c:178
do_fast_syscall_32+0x2f/0x70 arch/x86/entry/common.c:203
entry_SYSENTER_compat_after_hwframe+0x4d/0x5c
Reported-by: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Xiongwei Song <[email protected]>
Signed-off-by: Denis Efremov <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/block/floppy.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
index eb4f841902aee..aaee15058d181 100644
--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -3169,6 +3169,8 @@ static void raw_cmd_free(struct floppy_raw_cmd **ptr)
}
}
+#define MAX_LEN (1UL << MAX_ORDER << PAGE_SHIFT)
+
static int raw_cmd_copyin(int cmd, void __user *param,
struct floppy_raw_cmd **rcmd)
{
@@ -3198,7 +3200,7 @@ loop:
ptr->resultcode = 0;
if (ptr->flags & (FD_RAW_READ | FD_RAW_WRITE)) {
- if (ptr->length <= 0)
+ if (ptr->length <= 0 || ptr->length >= MAX_LEN)
return -EINVAL;
ptr->kernel_data = (char *)fd_dma_mem_alloc(ptr->length);
fallback_on_nodma_alloc(&ptr->kernel_data, ptr->length);
--
2.34.1
From: Alex Deucher <[email protected]>
[ Upstream commit 92020e81ddbeac351ea4a19bcf01743f32b9c800 ]
Disable vblanks immediately to save power. I think this was
missed when we merged DC support.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1781
Reviewed-by: Harry Wentland <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/amd/amdgpu/amdgpu_irq.c | 1 -
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 3 +++
2 files changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_irq.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_irq.c
index 2f70fdd6104f2..582055136cdbf 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_irq.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_irq.c
@@ -267,7 +267,6 @@ int amdgpu_irq_init(struct amdgpu_device *adev)
if (!amdgpu_device_has_dc_support(adev)) {
if (!adev->enable_virtual_display)
/* Disable vblank IRQs aggressively for power-saving */
- /* XXX: can this be enabled for DC? */
adev_to_drm(adev)->vblank_disable_immediate = true;
r = drm_vblank_init(adev_to_drm(adev), adev->mode_info.num_crtc);
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index a5b6f36fe1d72..6c8f141103da4 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -1069,6 +1069,9 @@ static int amdgpu_dm_init(struct amdgpu_device *adev)
adev_to_drm(adev)->mode_config.cursor_width = adev->dm.dc->caps.max_cursor_size;
adev_to_drm(adev)->mode_config.cursor_height = adev->dm.dc->caps.max_cursor_size;
+ /* Disable vblank IRQs aggressively for power-saving */
+ adev_to_drm(adev)->vblank_disable_immediate = true;
+
if (drm_vblank_init(adev_to_drm(adev), adev->dm.display_indexes_num)) {
DRM_ERROR(
"amdgpu: failed to initialize sw for display support.\n");
--
2.34.1
From: Mika Westerberg <[email protected]>
[ Upstream commit f3380cac0c0b3a6f49ab161e2a057c363962f48d ]
If protocol tunnels are already up when the driver is loaded, for
instance if the boot firmware implements connection manager of its own,
runtime PM reference count of the consumer devices behind the tunnel
might have been increased already before the device link is created but
the supplier device runtime PM reference count is not. This leads to a
situation where the supplier (the Thunderbolt driver) can runtime
suspend even if it should not because the corresponding protocol tunnel
needs to be up causing the devices to be removed from the corresponding
native bus.
Prevent this from happening by making both sides of the link runtime PM
active briefly. The pm_runtime_put() for the consumer (PCIe
root/downstream port, xHCI) then allows it to runtime suspend again but
keeps the supplier runtime resumed the whole time it is runtime active.
Signed-off-by: Mika Westerberg <[email protected]>
Reviewed-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/thunderbolt/acpi.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/drivers/thunderbolt/acpi.c b/drivers/thunderbolt/acpi.c
index b5442f979b4d0..6355fdf7d71a3 100644
--- a/drivers/thunderbolt/acpi.c
+++ b/drivers/thunderbolt/acpi.c
@@ -7,6 +7,7 @@
*/
#include <linux/acpi.h>
+#include <linux/pm_runtime.h>
#include "tb.h"
@@ -74,8 +75,18 @@ static acpi_status tb_acpi_add_link(acpi_handle handle, u32 level, void *data,
pci_pcie_type(pdev) == PCI_EXP_TYPE_DOWNSTREAM))) {
const struct device_link *link;
+ /*
+ * Make them both active first to make sure the NHI does
+ * not runtime suspend before the consumer. The
+ * pm_runtime_put() below then allows the consumer to
+ * runtime suspend again (which then allows NHI runtime
+ * suspend too now that the device link is established).
+ */
+ pm_runtime_get_sync(&pdev->dev);
+
link = device_link_add(&pdev->dev, &nhi->pdev->dev,
DL_FLAG_AUTOREMOVE_SUPPLIER |
+ DL_FLAG_RPM_ACTIVE |
DL_FLAG_PM_RUNTIME);
if (link) {
dev_dbg(&nhi->pdev->dev, "created link from %s\n",
@@ -84,6 +95,8 @@ static acpi_status tb_acpi_add_link(acpi_handle handle, u32 level, void *data,
dev_warn(&nhi->pdev->dev, "device link creation from %s failed\n",
dev_name(&pdev->dev));
}
+
+ pm_runtime_put(&pdev->dev);
}
out_put:
--
2.34.1
From: Yang Li <[email protected]>
[ Upstream commit a689e8d1f80012f90384ebac9dcfac4201f9f77e ]
Clang static analysis reports this error
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:2870:7: warning:
Dereference of null pointer [clang-analyzer-core.NullDereference]
if
(top_pipe_to_program->stream_res.tg->funcs->lock_doublebuffer_enable) {
^
top_pipe_to_program being NULL is caught as an error
But then it is used to report the error.
So add a check before using it.
Reported-by: Abaci Robot <[email protected]>
Signed-off-by: Yang Li <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/amd/display/dc/core/dc.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc.c b/drivers/gpu/drm/amd/display/dc/core/dc.c
index 284ed1c8a35ac..93f5229c303e7 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc.c
@@ -2436,7 +2436,8 @@ static void commit_planes_for_stream(struct dc *dc,
}
if ((update_type != UPDATE_TYPE_FAST) && stream->update_flags.bits.dsc_changed)
- if (top_pipe_to_program->stream_res.tg->funcs->lock_doublebuffer_enable) {
+ if (top_pipe_to_program &&
+ top_pipe_to_program->stream_res.tg->funcs->lock_doublebuffer_enable) {
if (should_use_dmub_lock(stream->link)) {
union dmub_hw_lock_flags hw_locks = { 0 };
struct dmub_hw_lock_inst_flags inst_flags = { 0 };
--
2.34.1
From: Pavankumar Kondeti <[email protected]>
[ Upstream commit c76ef96fc00eb398c8fc836b0eb2f82bcc619dc7 ]
Function fs endpoint file operations are synchronized via an interruptible
mutex wait. However we see threads that do ep file operations concurrently
are getting blocked for the mutex lock in __fdget_pos(). This is an
uninterruptible wait and we see hung task warnings and kernel panic
if hung_task_panic systcl is enabled if host does not send/receive
the data for long time.
The reason for threads getting blocked in __fdget_pos() is due to
the file position protection introduced by the commit 9c225f2655e3
("vfs: atomic f_pos accesses as per POSIX"). Since function fs
endpoint files does not have the notion of the file position, switch
to the stream mode. This will bypass the file position mutex and
threads will be blocked in interruptible state for the function fs
mutex.
It should not affects user space as we are only changing the task state
changes the task state from UNINTERRUPTIBLE to INTERRUPTIBLE while waiting
for the USB transfers to be finished. However there is a slight change to
the O_NONBLOCK behavior. Earlier threads that are using O_NONBLOCK are also
getting blocked inside fdget_pos(). Now they reach to function fs and error
code is returned. The non blocking behavior is actually honoured now.
Reviewed-by: John Keeping <[email protected]>
Signed-off-by: Pavankumar Kondeti <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/gadget/function/f_fs.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/gadget/function/f_fs.c b/drivers/usb/gadget/function/f_fs.c
index cbb7947f366f9..d8652321e15e9 100644
--- a/drivers/usb/gadget/function/f_fs.c
+++ b/drivers/usb/gadget/function/f_fs.c
@@ -614,7 +614,7 @@ static int ffs_ep0_open(struct inode *inode, struct file *file)
file->private_data = ffs;
ffs_data_opened(ffs);
- return 0;
+ return stream_open(inode, file);
}
static int ffs_ep0_release(struct inode *inode, struct file *file)
@@ -1152,7 +1152,7 @@ ffs_epfile_open(struct inode *inode, struct file *file)
file->private_data = epfile;
ffs_data_opened(epfile->ffs);
- return 0;
+ return stream_open(inode, file);
}
static int ffs_aio_cancel(struct kiocb *kiocb)
--
2.34.1
From: Johannes Berg <[email protected]>
[ Upstream commit db66abeea3aefed481391ecc564fb7b7fb31d742 ]
If userspace installs a lot of multicast groups very quickly, then
we may run out of command queue space as we send the updates in an
asynchronous fashion (due to locking concerns), and the CPU can
create them faster than the firmware can process them. This is true
even when mac80211 has a work struct that gets scheduled.
Fix this by synchronizing with the firmware after sending all those
commands - outside of the iteration we can send a synchronous echo
command that just has the effect of the CPU waiting for the prior
asynchronous commands to finish. This also will cause fewer of the
commands to be sent to the firmware overall, because the work will
only run once when rescheduled multiple times while it's running.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=213649
Suggested-by: Emmanuel Grumbach <[email protected]>
Reported-by: Maximilian Ernestus <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20211204083238.51aea5b79ea4.I88a44798efda16e9fe480fb3e94224931d311b29@changeid
Signed-off-by: Luca Coelho <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../net/wireless/intel/iwlwifi/mvm/mac80211.c | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
index 81cc85a97eb20..922a7ea0cd24e 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
@@ -1739,6 +1739,7 @@ static void iwl_mvm_recalc_multicast(struct iwl_mvm *mvm)
struct iwl_mvm_mc_iter_data iter_data = {
.mvm = mvm,
};
+ int ret;
lockdep_assert_held(&mvm->mutex);
@@ -1748,6 +1749,22 @@ static void iwl_mvm_recalc_multicast(struct iwl_mvm *mvm)
ieee80211_iterate_active_interfaces_atomic(
mvm->hw, IEEE80211_IFACE_ITER_NORMAL,
iwl_mvm_mc_iface_iterator, &iter_data);
+
+ /*
+ * Send a (synchronous) ech command so that we wait for the
+ * multiple asynchronous MCAST_FILTER_CMD commands sent by
+ * the interface iterator. Otherwise, we might get here over
+ * and over again (by userspace just sending a lot of these)
+ * and the CPU can send them faster than the firmware can
+ * process them.
+ * Note that the CPU is still faster - but with this we'll
+ * actually send fewer commands overall because the CPU will
+ * not schedule the work in mac80211 as frequently if it's
+ * still running when rescheduled (possibly multiple times).
+ */
+ ret = iwl_mvm_send_cmd_pdu(mvm, ECHO_CMD, 0, 0, NULL);
+ if (ret)
+ IWL_ERR(mvm, "Failed to synchronize multicast groups update\n");
}
static u64 iwl_mvm_prepare_multicast(struct ieee80211_hw *hw,
--
2.34.1
From: Andre Przywara <[email protected]>
[ Upstream commit a92882a4d270fbcc021ee6848de5e48b7f0d27f3 ]
In the decompressor's head.S we need to start with an instruction that
is some kind of NOP, but also mimics as the PE/COFF header, when the
kernel is linked as an UEFI application. The clever solution here is
"tstne r0, #0x4d000", which in the worst case just clobbers the
condition flags, and bears the magic "MZ" signature in the lowest 16 bits.
However the encoding used (0x13105a4d) is actually not valid, since bits
[15:12] are supposed to be 0 (written as "(0)" in the ARM ARM).
Violating this is UNPREDICTABLE, and *can* trigger an UNDEFINED
exception. Common Cortex cores seem to ignore those bits, but QEMU
chooses to trap, so the code goes fishing because of a missing exception
handler at this point. We are just saved by the fact that commonly (with
-kernel or when running from U-Boot) the "Z" bit is set, so the
instruction is never executed. See [0] for more details.
To make things more robust and avoid UNPREDICTABLE behaviour in the
kernel code, lets replace this with a "two-instruction NOP":
The first instruction is an exclusive OR, the effect of which the second
instruction reverts. This does not leave any trace, neither in a
register nor in the condition flags. Also it's a perfectly valid
encoding. Kudos to Peter Maydell for coming up with this gem.
[0] https://lore.kernel.org/qemu-devel/YTPIdbUCmwagL5%[email protected]/T/
Link: https://lore.kernel.org/linux-arm-kernel/[email protected]/T/
Fixes: 81a0bc39ea19 ("ARM: add UEFI stub support")
Signed-off-by: Andre Przywara <[email protected]>
Reported-by: Adam Lackorzynski <[email protected]>
Suggested-by: Peter Maydell <[email protected]>
Reviewed-by: Ard Biesheuvel <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Signed-off-by: Russell King (Oracle) <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/compressed/efi-header.S | 22 ++++++++++++++--------
arch/arm/boot/compressed/head.S | 3 ++-
2 files changed, 16 insertions(+), 9 deletions(-)
diff --git a/arch/arm/boot/compressed/efi-header.S b/arch/arm/boot/compressed/efi-header.S
index c0e7a745103e2..230030c130853 100644
--- a/arch/arm/boot/compressed/efi-header.S
+++ b/arch/arm/boot/compressed/efi-header.S
@@ -9,16 +9,22 @@
#include <linux/sizes.h>
.macro __nop
-#ifdef CONFIG_EFI_STUB
- @ This is almost but not quite a NOP, since it does clobber the
- @ condition flags. But it is the best we can do for EFI, since
- @ PE/COFF expects the magic string "MZ" at offset 0, while the
- @ ARM/Linux boot protocol expects an executable instruction
- @ there.
- .inst MZ_MAGIC | (0x1310 << 16) @ tstne r0, #0x4d000
-#else
AR_CLASS( mov r0, r0 )
M_CLASS( nop.w )
+ .endm
+
+ .macro __initial_nops
+#ifdef CONFIG_EFI_STUB
+ @ This is a two-instruction NOP, which happens to bear the
+ @ PE/COFF signature "MZ" in the first two bytes, so the kernel
+ @ is accepted as an EFI binary. Booting via the UEFI stub
+ @ will not execute those instructions, but the ARM/Linux
+ @ boot protocol does, so we need some NOPs here.
+ .inst MZ_MAGIC | (0xe225 << 16) @ eor r5, r5, 0x4d000
+ eor r5, r5, 0x4d000 @ undo previous insn
+#else
+ __nop
+ __nop
#endif
.endm
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 247ce90559901..7a38c63b62bf0 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -190,7 +190,8 @@ start:
* were patching the initial instructions of the kernel, i.e
* had started to exploit this "patch area".
*/
- .rept 7
+ __initial_nops
+ .rept 5
__nop
.endr
#ifndef CONFIG_THUMB2_KERNEL
--
2.34.1
From: Athira Rajeev <[email protected]>
[ Upstream commit 2c9ac51b850d84ee496b0a5d832ce66d411ae552 ]
Running perf fuzzer showed below in dmesg logs:
"Can't find PMC that caused IRQ"
This means a PMU exception happened, but none of the PMC's (Performance
Monitor Counter) were found to be overflown. There are some corner cases
that clears the PMCs after PMI gets masked. In such cases, the perf
interrupt handler will not find the active PMC values that had caused
the overflow and thus leads to this message while replaying.
Case 1: PMU Interrupt happens during replay of other interrupts and
counter values gets cleared by PMU callbacks before replay:
During replay of interrupts like timer, __do_irq() and doorbell
exception, we conditionally enable interrupts via may_hard_irq_enable().
This could potentially create a window to generate a PMI. Since irq soft
mask is set to ALL_DISABLED, the PMI will get masked here. We could get
IPIs run before perf interrupt is replayed and the PMU events could
be deleted or stopped. This will change the PMU SPR values and resets
the counters. Snippet of ftrace log showing PMU callbacks invoked in
__do_irq():
<idle>-0 [051] dns. 132025441306354: __do_irq <-call_do_irq
<idle>-0 [051] dns. 132025441306430: irq_enter <-__do_irq
<idle>-0 [051] dns. 132025441306503: irq_enter_rcu <-__do_irq
<idle>-0 [051] dnH. 132025441306599: xive_get_irq <-__do_irq
<<>>
<idle>-0 [051] dnH. 132025441307770: generic_smp_call_function_single_interrupt <-smp_ipi_demux_relaxed
<idle>-0 [051] dnH. 132025441307839: flush_smp_call_function_queue <-smp_ipi_demux_relaxed
<idle>-0 [051] dnH. 132025441308057: _raw_spin_lock <-event_function
<idle>-0 [051] dnH. 132025441308206: power_pmu_disable <-perf_pmu_disable
<idle>-0 [051] dnH. 132025441308337: power_pmu_del <-event_sched_out
<idle>-0 [051] dnH. 132025441308407: power_pmu_read <-power_pmu_del
<idle>-0 [051] dnH. 132025441308477: read_pmc <-power_pmu_read
<idle>-0 [051] dnH. 132025441308590: isa207_disable_pmc <-power_pmu_del
<idle>-0 [051] dnH. 132025441308663: write_pmc <-power_pmu_del
<idle>-0 [051] dnH. 132025441308787: power_pmu_event_idx <-perf_event_update_userpage
<idle>-0 [051] dnH. 132025441308859: rcu_read_unlock_strict <-perf_event_update_userpage
<idle>-0 [051] dnH. 132025441308975: power_pmu_enable <-perf_pmu_enable
<<>>
<idle>-0 [051] dnH. 132025441311108: irq_exit <-__do_irq
<idle>-0 [051] dns. 132025441311319: performance_monitor_exception <-replay_soft_interrupts
Case 2: PMI's masked during local_* operations, example local_add(). If
the local_add() operation happens within a local_irq_save(), replay of
PMI will be during local_irq_restore(). Similar to case 1, this could
also create a window before replay where PMU events gets deleted or
stopped.
Fix it by updating the PMU callback function power_pmu_disable() to
check for pending perf interrupt. If there is an overflown PMC and
pending perf interrupt indicated in paca, clear the PMI bit in paca to
drop that sample. Clearing of PMI bit is done in power_pmu_disable()
since disable is invoked before any event gets deleted/stopped. With
this fix, if there are more than one event running in the PMU, there is
a chance that we clear the PMI bit for the event which is not getting
deleted/stopped. The other events may still remain active. Hence to make
sure we don't drop valid sample in such cases, another check is added in
power_pmu_enable. This checks if there is an overflown PMC found among
the active events and if so enable back the PMI bit. Two new helper
functions are introduced to clear/set the PMI, ie
clear_pmi_irq_pending() and set_pmi_irq_pending(). Helper function
pmi_irq_pending() is introduced to give a warning if there is pending
PMI bit in paca, but no PMC is overflown.
Also there are corner cases which result in performance monitor
interrupts being triggered during power_pmu_disable(). This happens
since PMXE bit is not cleared along with disabling of other MMCR0 bits
in the pmu_disable. Such PMI's could leave the PMU running and could
trigger PMI again which will set MMCR0 PMAO bit. This could lead to
spurious interrupts in some corner cases. Example, a timer after
power_pmu_del() which will re-enable interrupts and triggers a PMI again
since PMAO bit is still set. But fails to find valid overflow since PMC
was cleared in power_pmu_del(). Fix that by disabling PMXE along with
disabling of other MMCR0 bits in power_pmu_disable().
We can't just replay PMI any time. Hence this approach is preferred
rather than replaying PMI before resetting overflown PMC. Patch also
documents core-book3s on a race condition which can trigger these PMC
messages during idle path in PowerNV.
Fixes: f442d004806e ("powerpc/64s: Add support to mask perf interrupts and replay them")
Reported-by: Nageswara R Sastry <[email protected]>
Suggested-by: Nicholas Piggin <[email protected]>
Suggested-by: Madhavan Srinivasan <[email protected]>
Signed-off-by: Athira Rajeev <[email protected]>
Tested-by: Nageswara R Sastry <[email protected]>
Reviewed-by: Nicholas Piggin <[email protected]>
[mpe: Make pmi_irq_pending() return bool, reflow/reword some comments]
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/include/asm/hw_irq.h | 40 +++++++++++++++++++++
arch/powerpc/perf/core-book3s.c | 58 ++++++++++++++++++++++++++++++-
2 files changed, 97 insertions(+), 1 deletion(-)
diff --git a/arch/powerpc/include/asm/hw_irq.h b/arch/powerpc/include/asm/hw_irq.h
index da94cab528dd4..0f2acbb966740 100644
--- a/arch/powerpc/include/asm/hw_irq.h
+++ b/arch/powerpc/include/asm/hw_irq.h
@@ -175,6 +175,42 @@ static inline bool arch_irqs_disabled(void)
return arch_irqs_disabled_flags(arch_local_save_flags());
}
+static inline void set_pmi_irq_pending(void)
+{
+ /*
+ * Invoked from PMU callback functions to set PMI bit in the paca.
+ * This has to be called with irq's disabled (via hard_irq_disable()).
+ */
+ if (IS_ENABLED(CONFIG_PPC_IRQ_SOFT_MASK_DEBUG))
+ WARN_ON_ONCE(mfmsr() & MSR_EE);
+
+ get_paca()->irq_happened |= PACA_IRQ_PMI;
+}
+
+static inline void clear_pmi_irq_pending(void)
+{
+ /*
+ * Invoked from PMU callback functions to clear the pending PMI bit
+ * in the paca.
+ */
+ if (IS_ENABLED(CONFIG_PPC_IRQ_SOFT_MASK_DEBUG))
+ WARN_ON_ONCE(mfmsr() & MSR_EE);
+
+ get_paca()->irq_happened &= ~PACA_IRQ_PMI;
+}
+
+static inline bool pmi_irq_pending(void)
+{
+ /*
+ * Invoked from PMU callback functions to check if there is a pending
+ * PMI bit in the paca.
+ */
+ if (get_paca()->irq_happened & PACA_IRQ_PMI)
+ return true;
+
+ return false;
+}
+
#ifdef CONFIG_PPC_BOOK3S
/*
* To support disabling and enabling of irq with PMI, set of
@@ -368,6 +404,10 @@ static inline bool arch_irq_disabled_regs(struct pt_regs *regs)
static inline void may_hard_irq_enable(void) { }
+static inline void clear_pmi_irq_pending(void) { }
+static inline void set_pmi_irq_pending(void) { }
+static inline bool pmi_irq_pending(void) { return false; }
+
static inline void irq_soft_mask_regs_set_state(struct pt_regs *regs, unsigned long val)
{
}
diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c
index b5cac8ddcf5bc..bd34e062bd290 100644
--- a/arch/powerpc/perf/core-book3s.c
+++ b/arch/powerpc/perf/core-book3s.c
@@ -805,6 +805,19 @@ static void write_pmc(int idx, unsigned long val)
}
}
+static int any_pmc_overflown(struct cpu_hw_events *cpuhw)
+{
+ int i, idx;
+
+ for (i = 0; i < cpuhw->n_events; i++) {
+ idx = cpuhw->event[i]->hw.idx;
+ if ((idx) && ((int)read_pmc(idx) < 0))
+ return idx;
+ }
+
+ return 0;
+}
+
/* Called from sysrq_handle_showregs() */
void perf_event_print_debug(void)
{
@@ -1228,11 +1241,13 @@ static void power_pmu_disable(struct pmu *pmu)
/*
* Set the 'freeze counters' bit, clear EBE/BHRBA/PMCC/PMAO/FC56
+ * Also clear PMXE to disable PMI's getting triggered in some
+ * corner cases during PMU disable.
*/
val = mmcr0 = mfspr(SPRN_MMCR0);
val |= MMCR0_FC;
val &= ~(MMCR0_EBE | MMCR0_BHRBA | MMCR0_PMCC | MMCR0_PMAO |
- MMCR0_FC56);
+ MMCR0_PMXE | MMCR0_FC56);
/* Set mmcr0 PMCCEXT for p10 */
if (ppmu->flags & PPMU_ARCH_31)
val |= MMCR0_PMCCEXT;
@@ -1246,6 +1261,23 @@ static void power_pmu_disable(struct pmu *pmu)
mb();
isync();
+ /*
+ * Some corner cases could clear the PMU counter overflow
+ * while a masked PMI is pending. One such case is when
+ * a PMI happens during interrupt replay and perf counter
+ * values are cleared by PMU callbacks before replay.
+ *
+ * If any PMC corresponding to the active PMU events are
+ * overflown, disable the interrupt by clearing the paca
+ * bit for PMI since we are disabling the PMU now.
+ * Otherwise provide a warning if there is PMI pending, but
+ * no counter is found overflown.
+ */
+ if (any_pmc_overflown(cpuhw))
+ clear_pmi_irq_pending();
+ else
+ WARN_ON(pmi_irq_pending());
+
val = mmcra = cpuhw->mmcr.mmcra;
/*
@@ -1337,6 +1369,15 @@ static void power_pmu_enable(struct pmu *pmu)
* (possibly updated for removal of events).
*/
if (!cpuhw->n_added) {
+ /*
+ * If there is any active event with an overflown PMC
+ * value, set back PACA_IRQ_PMI which would have been
+ * cleared in power_pmu_disable().
+ */
+ hard_irq_disable();
+ if (any_pmc_overflown(cpuhw))
+ set_pmi_irq_pending();
+
mtspr(SPRN_MMCRA, cpuhw->mmcr.mmcra & ~MMCRA_SAMPLE_ENABLE);
mtspr(SPRN_MMCR1, cpuhw->mmcr.mmcr1);
if (ppmu->flags & PPMU_ARCH_31)
@@ -2274,6 +2315,14 @@ static void __perf_event_interrupt(struct pt_regs *regs)
break;
}
}
+
+ /*
+ * Clear PACA_IRQ_PMI in case it was set by
+ * set_pmi_irq_pending() when PMU was enabled
+ * after accounting for interrupts.
+ */
+ clear_pmi_irq_pending();
+
if (!active)
/* reset non active counters that have overflowed */
write_pmc(i + 1, 0);
@@ -2293,6 +2342,13 @@ static void __perf_event_interrupt(struct pt_regs *regs)
}
}
}
+
+ /*
+ * During system wide profling or while specific CPU is monitored for an
+ * event, some corner cases could cause PMC to overflow in idle path. This
+ * will trigger a PMI after waking up from idle. Since counter values are _not_
+ * saved/restored in idle path, can lead to below "Can't find PMC" message.
+ */
if (unlikely(!found) && !arch_irq_disabled_regs(regs))
printk_ratelimited(KERN_WARNING "Can't find PMC that caused IRQ\n");
--
2.34.1
From: Sebastian Gottschall <[email protected]>
[ Upstream commit e8a91863eba3966a447d2daa1526082d52b5db2a ]
While running stress tests in roaming scenarios (switching ap's every 5
seconds, we discovered a issue which leads to tx hangings of exactly 5
seconds while or after scanning for new accesspoints. We found out that
this hanging is triggered by ath10k_mac_wait_tx_complete since the
empty_tx_wq was not wake when the num_tx_pending counter reaches zero.
To fix this, we simply move the wake_up call to htt_tx_dec_pending,
since this call was missed on several locations within the ath10k code.
Signed-off-by: Sebastian Gottschall <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/ath10k/htt_tx.c | 3 +++
drivers/net/wireless/ath/ath10k/txrx.c | 2 --
2 files changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/htt_tx.c b/drivers/net/wireless/ath/ath10k/htt_tx.c
index 1fc0a312ab587..5f67da47036cf 100644
--- a/drivers/net/wireless/ath/ath10k/htt_tx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_tx.c
@@ -147,6 +147,9 @@ void ath10k_htt_tx_dec_pending(struct ath10k_htt *htt)
htt->num_pending_tx--;
if (htt->num_pending_tx == htt->max_num_pending_tx - 1)
ath10k_mac_tx_unlock(htt->ar, ATH10K_TX_PAUSE_Q_FULL);
+
+ if (htt->num_pending_tx == 0)
+ wake_up(&htt->empty_tx_wq);
}
int ath10k_htt_tx_inc_pending(struct ath10k_htt *htt)
diff --git a/drivers/net/wireless/ath/ath10k/txrx.c b/drivers/net/wireless/ath/ath10k/txrx.c
index aefe1f7f906c0..f51f1cf2c6a40 100644
--- a/drivers/net/wireless/ath/ath10k/txrx.c
+++ b/drivers/net/wireless/ath/ath10k/txrx.c
@@ -82,8 +82,6 @@ int ath10k_txrx_tx_unref(struct ath10k_htt *htt,
flags = skb_cb->flags;
ath10k_htt_tx_free_msdu_id(htt, tx_done->msdu_id);
ath10k_htt_tx_dec_pending(htt);
- if (htt->num_pending_tx == 0)
- wake_up(&htt->empty_tx_wq);
spin_unlock_bh(&htt->tx_lock);
rcu_read_lock();
--
2.34.1
From: Alexander Aring <[email protected]>
[ Upstream commit 6c2e3bf68f3e5e5a647aa52be246d5f552d7496d ]
This patch fixes the following crash by receiving a invalid message:
[ 160.672220] ==================================================================
[ 160.676206] BUG: KASAN: user-memory-access in dlm_user_add_ast+0xc3/0x370
[ 160.679659] Read of size 8 at addr 00000000deadbeef by task kworker/u32:13/319
[ 160.681447]
[ 160.681824] CPU: 10 PID: 319 Comm: kworker/u32:13 Not tainted 5.14.0-rc2+ #399
[ 160.683472] Hardware name: Red Hat KVM/RHEL-AV, BIOS 1.14.0-1.module+el8.6.0+12648+6ede71a5 04/01/2014
[ 160.685574] Workqueue: dlm_recv process_recv_sockets
[ 160.686721] Call Trace:
[ 160.687310] dump_stack_lvl+0x56/0x6f
[ 160.688169] ? dlm_user_add_ast+0xc3/0x370
[ 160.689116] kasan_report.cold.14+0x116/0x11b
[ 160.690138] ? dlm_user_add_ast+0xc3/0x370
[ 160.690832] dlm_user_add_ast+0xc3/0x370
[ 160.691502] _receive_unlock_reply+0x103/0x170
[ 160.692241] _receive_message+0x11df/0x1ec0
[ 160.692926] ? rcu_read_lock_sched_held+0xa1/0xd0
[ 160.693700] ? rcu_read_lock_bh_held+0xb0/0xb0
[ 160.694427] ? lock_acquire+0x175/0x400
[ 160.695058] ? do_purge.isra.51+0x200/0x200
[ 160.695744] ? lock_acquired+0x360/0x5d0
[ 160.696400] ? lock_contended+0x6a0/0x6a0
[ 160.697055] ? lock_release+0x21d/0x5e0
[ 160.697686] ? lock_is_held_type+0xe0/0x110
[ 160.698352] ? lock_is_held_type+0xe0/0x110
[ 160.699026] ? ___might_sleep+0x1cc/0x1e0
[ 160.699698] ? dlm_wait_requestqueue+0x94/0x140
[ 160.700451] ? dlm_process_requestqueue+0x240/0x240
[ 160.701249] ? down_write_killable+0x2b0/0x2b0
[ 160.701988] ? do_raw_spin_unlock+0xa2/0x130
[ 160.702690] dlm_receive_buffer+0x1a5/0x210
[ 160.703385] dlm_process_incoming_buffer+0x726/0x9f0
[ 160.704210] receive_from_sock+0x1c0/0x3b0
[ 160.704886] ? dlm_tcp_shutdown+0x30/0x30
[ 160.705561] ? lock_acquire+0x175/0x400
[ 160.706197] ? rcu_read_lock_sched_held+0xa1/0xd0
[ 160.706941] ? rcu_read_lock_bh_held+0xb0/0xb0
[ 160.707681] process_recv_sockets+0x32/0x40
[ 160.708366] process_one_work+0x55e/0xad0
[ 160.709045] ? pwq_dec_nr_in_flight+0x110/0x110
[ 160.709820] worker_thread+0x65/0x5e0
[ 160.710423] ? process_one_work+0xad0/0xad0
[ 160.711087] kthread+0x1ed/0x220
[ 160.711628] ? set_kthread_struct+0x80/0x80
[ 160.712314] ret_from_fork+0x22/0x30
The issue is that we received a DLM message for a user lock but the
destination lock is a kernel lock. Note that the address which is trying
to derefence is 00000000deadbeef, which is in a kernel lock
lkb->lkb_astparam, this field should never be derefenced by the DLM
kernel stack. In case of a user lock lkb->lkb_astparam is lkb->lkb_ua
(memory is shared by a union field). The struct lkb_ua will be handled
by the DLM kernel stack but on a kernel lock it will contain invalid
data and ends in most likely crashing the kernel.
It can be reproduced with two cluster nodes.
node 2:
dlm_tool join test
echo "862 fooobaar 1 2 1" > /sys/kernel/debug/dlm/test_locks
echo "862 3 1" > /sys/kernel/debug/dlm/test_waiters
node 1:
dlm_tool join test
python:
foo = DLM(h_cmd=3, o_nextcmd=1, h_nodeid=1, h_lockspace=0x77222027, \
m_type=7, m_flags=0x1, m_remid=0x862, m_result=0xFFFEFFFE)
newFile = open("/sys/kernel/debug/dlm/comms/2/rawmsg", "wb")
newFile.write(bytes(foo))
Signed-off-by: Alexander Aring <[email protected]>
Signed-off-by: David Teigland <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/dlm/lock.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/fs/dlm/lock.c b/fs/dlm/lock.c
index 002123efc6b05..1e9d8999b9390 100644
--- a/fs/dlm/lock.c
+++ b/fs/dlm/lock.c
@@ -3975,6 +3975,14 @@ static int validate_message(struct dlm_lkb *lkb, struct dlm_message *ms)
int from = ms->m_header.h_nodeid;
int error = 0;
+ /* currently mixing of user/kernel locks are not supported */
+ if (ms->m_flags & DLM_IFL_USER && ~lkb->lkb_flags & DLM_IFL_USER) {
+ log_error(lkb->lkb_resource->res_ls,
+ "got user dlm message for a kernel lock");
+ error = -EINVAL;
+ goto out;
+ }
+
switch (ms->m_type) {
case DLM_MSG_CONVERT:
case DLM_MSG_UNLOCK:
@@ -4003,6 +4011,7 @@ static int validate_message(struct dlm_lkb *lkb, struct dlm_message *ms)
error = -EINVAL;
}
+out:
if (error)
log_error(lkb->lkb_resource->res_ls,
"ignore invalid message %d from %d %x %x %x %d",
--
2.34.1
From: Ben Skeggs <[email protected]>
[ Upstream commit 1d2271d2fb85e54bfc9630a6c30ac0feb9ffb983 ]
There have been reports of the WFI timing out on some boards, and a
patch was proposed to just remove it. This stuff is rather fragile,
and I believe the WFI might be needed with our FW prior to GM200.
However, we probably should not be touching PMU during init on GPUs
where we depend on NVIDIA FW, outside of limited circumstances, so
this should be a somewhat safer change that achieves the desired
result.
Reported-by: Diego Viola <[email protected]>
Signed-off-by: Ben Skeggs <[email protected]>
Reviewed-by: Karol Herbst <[email protected]>
Signed-off-by: Karol Herbst <[email protected]>
Link: https://gitlab.freedesktop.org/drm/nouveau/-/merge_requests/10
Signed-off-by: Sasha Levin <[email protected]>
---
.../gpu/drm/nouveau/nvkm/subdev/pmu/base.c | 37 +++++++++++--------
1 file changed, 21 insertions(+), 16 deletions(-)
diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/pmu/base.c b/drivers/gpu/drm/nouveau/nvkm/subdev/pmu/base.c
index a0fe607c9c07f..3bfc55c571b5e 100644
--- a/drivers/gpu/drm/nouveau/nvkm/subdev/pmu/base.c
+++ b/drivers/gpu/drm/nouveau/nvkm/subdev/pmu/base.c
@@ -94,20 +94,13 @@ nvkm_pmu_fini(struct nvkm_subdev *subdev, bool suspend)
return 0;
}
-static int
+static void
nvkm_pmu_reset(struct nvkm_pmu *pmu)
{
struct nvkm_device *device = pmu->subdev.device;
if (!pmu->func->enabled(pmu))
- return 0;
-
- /* Inhibit interrupts, and wait for idle. */
- nvkm_wr32(device, 0x10a014, 0x0000ffff);
- nvkm_msec(device, 2000,
- if (!nvkm_rd32(device, 0x10a04c))
- break;
- );
+ return;
/* Reset. */
if (pmu->func->reset)
@@ -118,25 +111,37 @@ nvkm_pmu_reset(struct nvkm_pmu *pmu)
if (!(nvkm_rd32(device, 0x10a10c) & 0x00000006))
break;
);
-
- return 0;
}
static int
nvkm_pmu_preinit(struct nvkm_subdev *subdev)
{
struct nvkm_pmu *pmu = nvkm_pmu(subdev);
- return nvkm_pmu_reset(pmu);
+ nvkm_pmu_reset(pmu);
+ return 0;
}
static int
nvkm_pmu_init(struct nvkm_subdev *subdev)
{
struct nvkm_pmu *pmu = nvkm_pmu(subdev);
- int ret = nvkm_pmu_reset(pmu);
- if (ret == 0 && pmu->func->init)
- ret = pmu->func->init(pmu);
- return ret;
+ struct nvkm_device *device = pmu->subdev.device;
+
+ if (!pmu->func->init)
+ return 0;
+
+ if (pmu->func->enabled(pmu)) {
+ /* Inhibit interrupts, and wait for idle. */
+ nvkm_wr32(device, 0x10a014, 0x0000ffff);
+ nvkm_msec(device, 2000,
+ if (!nvkm_rd32(device, 0x10a04c))
+ break;
+ );
+
+ nvkm_pmu_reset(pmu);
+ }
+
+ return pmu->func->init(pmu);
}
static void *
--
2.34.1
From: Russell King (Oracle) <[email protected]>
[ Upstream commit f20f94f7f52c4685c81754f489ffcc72186e8bdb ]
The PHY settings table is supposed to be sorted by descending match
priority - in other words, earlier entries are preferred over later
entries.
The order of 1000baseKX/Full and 1000baseT/Full is such that we
prefer 1000baseKX/Full over 1000baseT/Full, but 1000baseKX/Full is
a lot rarer than 1000baseT/Full, and thus is much less likely to
be preferred.
This causes phylink problems - it means a fixed link specifying a
speed of 1G and full duplex gets an ethtool linkmode of 1000baseKX/Full
rather than 1000baseT/Full as would be expected - and since we offer
userspace a software emulation of a conventional copper PHY, we want
to offer copper modes in preference to anything else. However, we do
still want to allow the rarer modes as well.
Hence, let's reorder these two modes to prefer copper.
Tested-by: Tom Lendacky <[email protected]>
Signed-off-by: Russell King (Oracle) <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Reported-by: Florian Fainelli <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/phy/phy-core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/phy/phy-core.c b/drivers/net/phy/phy-core.c
index 8d333d3084ed3..cccb83dae673b 100644
--- a/drivers/net/phy/phy-core.c
+++ b/drivers/net/phy/phy-core.c
@@ -161,11 +161,11 @@ static const struct phy_setting settings[] = {
PHY_SETTING( 2500, FULL, 2500baseT_Full ),
PHY_SETTING( 2500, FULL, 2500baseX_Full ),
/* 1G */
- PHY_SETTING( 1000, FULL, 1000baseKX_Full ),
PHY_SETTING( 1000, FULL, 1000baseT_Full ),
PHY_SETTING( 1000, HALF, 1000baseT_Half ),
PHY_SETTING( 1000, FULL, 1000baseT1_Full ),
PHY_SETTING( 1000, FULL, 1000baseX_Full ),
+ PHY_SETTING( 1000, FULL, 1000baseKX_Full ),
/* 100M */
PHY_SETTING( 100, FULL, 100baseT_Full ),
PHY_SETTING( 100, FULL, 100baseT1_Full ),
--
2.34.1
From: Ulf Hansson <[email protected]>
[ Upstream commit 8c3e5b74b9e2146f564905e50ca716591c76d4f1 ]
The mmc core takes a specific path to support initializing of a
non-standard SDIO card. This is triggered by looking for the card-quirk,
MMC_QUIRK_NONSTD_SDIO.
In mmc_sdio_init_card() this gets rather messy, as it causes the code to
bail out earlier, compared to the usual path. This leads to that the OCR
doesn't get saved properly in card->ocr. Fortunately, only omap_hsmmc has
been using the MMC_QUIRK_NONSTD_SDIO and is dealing with the issue, by
assigning a hardcoded value (0x80) to card->ocr from an ->init_card() ops.
To make the behaviour consistent, let's instead rely on the core to save
the OCR in card->ocr during initialization.
Reported-by: H. Nikolaus Schaller <[email protected]>
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: H. Nikolaus Schaller <[email protected]>
Link: https://lore.kernel.org/r/e7936cff7fc24d187ef2680d3b4edb0ade58f293.1636564631.git.hns@goldelico.com
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mmc/core/sdio.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c
index 1b0853a82189a..99a4ce68d82f1 100644
--- a/drivers/mmc/core/sdio.c
+++ b/drivers/mmc/core/sdio.c
@@ -708,6 +708,8 @@ try_again:
if (host->ops->init_card)
host->ops->init_card(host, card);
+ card->ocr = ocr_card;
+
/*
* If the host and card support UHS-I mode request the card
* to switch to 1.8V signaling level. No 1.8v signalling if
@@ -820,7 +822,7 @@ try_again:
goto mismatch;
}
}
- card->ocr = ocr_card;
+
mmc_fixup_device(card, sdio_fixup_methods);
if (card->type == MMC_TYPE_SD_COMBO) {
--
2.34.1
From: Baochen Qiang <[email protected]>
[ Upstream commit 767c94caf0efad136157110787fe221b74cb5c8a ]
With CONFIG_LOCKDEP=y and CONFIG_DEBUG_SPINLOCK=y, lockdep reports
below warning:
[ 166.059415] ============================================
[ 166.059416] WARNING: possible recursive locking detected
[ 166.059418] 5.15.0-wt-ath+ #10 Tainted: G W O
[ 166.059420] --------------------------------------------
[ 166.059421] kworker/0:2/116 is trying to acquire lock:
[ 166.059423] ffff9905f2083160 (&srng->lock){+.-.}-{2:2}, at: ath11k_hal_reo_cmd_send+0x20/0x490 [ath11k]
[ 166.059440]
but task is already holding lock:
[ 166.059442] ffff9905f2083230 (&srng->lock){+.-.}-{2:2}, at: ath11k_dp_process_reo_status+0x95/0x2d0 [ath11k]
[ 166.059491]
other info that might help us debug this:
[ 166.059492] Possible unsafe locking scenario:
[ 166.059493] CPU0
[ 166.059494] ----
[ 166.059495] lock(&srng->lock);
[ 166.059498] lock(&srng->lock);
[ 166.059500]
*** DEADLOCK ***
[ 166.059501] May be due to missing lock nesting notation
[ 166.059502] 3 locks held by kworker/0:2/116:
[ 166.059504] #0: ffff9905c0081548 ((wq_completion)events){+.+.}-{0:0}, at: process_one_work+0x1f6/0x660
[ 166.059511] #1: ffff9d2400a5fe68 ((debug_obj_work).work){+.+.}-{0:0}, at: process_one_work+0x1f6/0x660
[ 166.059517] #2: ffff9905f2083230 (&srng->lock){+.-.}-{2:2}, at: ath11k_dp_process_reo_status+0x95/0x2d0 [ath11k]
[ 166.059532]
stack backtrace:
[ 166.059534] CPU: 0 PID: 116 Comm: kworker/0:2 Kdump: loaded Tainted: G W O 5.15.0-wt-ath+ #10
[ 166.059537] Hardware name: Intel(R) Client Systems NUC8i7HVK/NUC8i7HVB, BIOS HNKBLi70.86A.0059.2019.1112.1124 11/12/2019
[ 166.059539] Workqueue: events free_obj_work
[ 166.059543] Call Trace:
[ 166.059545] <IRQ>
[ 166.059547] dump_stack_lvl+0x56/0x7b
[ 166.059552] __lock_acquire+0xb9a/0x1a50
[ 166.059556] lock_acquire+0x1e2/0x330
[ 166.059560] ? ath11k_hal_reo_cmd_send+0x20/0x490 [ath11k]
[ 166.059571] _raw_spin_lock_bh+0x33/0x70
[ 166.059574] ? ath11k_hal_reo_cmd_send+0x20/0x490 [ath11k]
[ 166.059584] ath11k_hal_reo_cmd_send+0x20/0x490 [ath11k]
[ 166.059594] ath11k_dp_tx_send_reo_cmd+0x3f/0x130 [ath11k]
[ 166.059605] ath11k_dp_rx_tid_del_func+0x221/0x370 [ath11k]
[ 166.059618] ath11k_dp_process_reo_status+0x22f/0x2d0 [ath11k]
[ 166.059632] ? ath11k_dp_service_srng+0x2ea/0x2f0 [ath11k]
[ 166.059643] ath11k_dp_service_srng+0x2ea/0x2f0 [ath11k]
[ 166.059655] ath11k_pci_ext_grp_napi_poll+0x1c/0x70 [ath11k_pci]
[ 166.059659] __napi_poll+0x28/0x230
[ 166.059664] net_rx_action+0x285/0x310
[ 166.059668] __do_softirq+0xe6/0x4d2
[ 166.059672] irq_exit_rcu+0xd2/0xf0
[ 166.059675] common_interrupt+0xa5/0xc0
[ 166.059678] </IRQ>
[ 166.059679] <TASK>
[ 166.059680] asm_common_interrupt+0x1e/0x40
[ 166.059683] RIP: 0010:_raw_spin_unlock_irqrestore+0x38/0x70
[ 166.059686] Code: 83 c7 18 e8 2a 95 43 ff 48 89 ef e8 22 d2 43 ff 81 e3 00 02 00 00 75 25 9c 58 f6 c4 02 75 2d 48 85 db 74 01 fb bf 01 00 00 00 <e8> 63 2e 40 ff 65 8b 05 8c 59 97 5c 85 c0 74 0a 5b 5d c3 e8 00 6a
[ 166.059689] RSP: 0018:ffff9d2400a5fca0 EFLAGS: 00000206
[ 166.059692] RAX: 0000000000000002 RBX: 0000000000000200 RCX: 0000000000000006
[ 166.059694] RDX: 0000000000000000 RSI: ffffffffa404879b RDI: 0000000000000001
[ 166.059696] RBP: ffff9905c0053000 R08: 0000000000000001 R09: 0000000000000001
[ 166.059698] R10: ffff9d2400a5fc50 R11: 0000000000000001 R12: ffffe186c41e2840
[ 166.059700] R13: 0000000000000001 R14: ffff9905c78a1c68 R15: 0000000000000001
[ 166.059704] free_debug_processing+0x257/0x3d0
[ 166.059708] ? free_obj_work+0x1f5/0x250
[ 166.059712] __slab_free+0x374/0x5a0
[ 166.059718] ? kmem_cache_free+0x2e1/0x370
[ 166.059721] ? free_obj_work+0x1f5/0x250
[ 166.059724] kmem_cache_free+0x2e1/0x370
[ 166.059727] free_obj_work+0x1f5/0x250
[ 166.059731] process_one_work+0x28b/0x660
[ 166.059735] ? process_one_work+0x660/0x660
[ 166.059738] worker_thread+0x37/0x390
[ 166.059741] ? process_one_work+0x660/0x660
[ 166.059743] kthread+0x176/0x1a0
[ 166.059746] ? set_kthread_struct+0x40/0x40
[ 166.059749] ret_from_fork+0x22/0x30
[ 166.059754] </TASK>
Since these two lockes are both initialized in ath11k_hal_srng_setup,
they are assigned with the same key. As a result lockdep suspects that
the task is trying to acquire the same lock (due to same key) while
already holding it, and thus reports the DEADLOCK warning. However as
they are different spinlock instances, the warning is false positive.
On the other hand, even no dead lock indeed, this is a major issue for
upstream regression testing as it disables lockdep functionality.
Fix it by assigning separate lock class key for each srng->lock.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
Signed-off-by: Baochen Qiang <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/ath11k/hal.c | 22 ++++++++++++++++++++++
drivers/net/wireless/ath/ath11k/hal.h | 2 ++
2 files changed, 24 insertions(+)
diff --git a/drivers/net/wireless/ath/ath11k/hal.c b/drivers/net/wireless/ath/ath11k/hal.c
index 9904c0eb75875..f3b9108ab6bd0 100644
--- a/drivers/net/wireless/ath/ath11k/hal.c
+++ b/drivers/net/wireless/ath/ath11k/hal.c
@@ -991,6 +991,7 @@ int ath11k_hal_srng_setup(struct ath11k_base *ab, enum hal_ring_type type,
srng->msi_data = params->msi_data;
srng->initialized = 1;
spin_lock_init(&srng->lock);
+ lockdep_set_class(&srng->lock, hal->srng_key + ring_id);
for (i = 0; i < HAL_SRNG_NUM_REG_GRP; i++) {
srng->hwreg_base[i] = srng_config->reg_start[i] +
@@ -1237,6 +1238,24 @@ static int ath11k_hal_srng_create_config(struct ath11k_base *ab)
return 0;
}
+static void ath11k_hal_register_srng_key(struct ath11k_base *ab)
+{
+ struct ath11k_hal *hal = &ab->hal;
+ u32 ring_id;
+
+ for (ring_id = 0; ring_id < HAL_SRNG_RING_ID_MAX; ring_id++)
+ lockdep_register_key(hal->srng_key + ring_id);
+}
+
+static void ath11k_hal_unregister_srng_key(struct ath11k_base *ab)
+{
+ struct ath11k_hal *hal = &ab->hal;
+ u32 ring_id;
+
+ for (ring_id = 0; ring_id < HAL_SRNG_RING_ID_MAX; ring_id++)
+ lockdep_unregister_key(hal->srng_key + ring_id);
+}
+
int ath11k_hal_srng_init(struct ath11k_base *ab)
{
struct ath11k_hal *hal = &ab->hal;
@@ -1256,6 +1275,8 @@ int ath11k_hal_srng_init(struct ath11k_base *ab)
if (ret)
goto err_free_cont_rdp;
+ ath11k_hal_register_srng_key(ab);
+
return 0;
err_free_cont_rdp:
@@ -1270,6 +1291,7 @@ void ath11k_hal_srng_deinit(struct ath11k_base *ab)
{
struct ath11k_hal *hal = &ab->hal;
+ ath11k_hal_unregister_srng_key(ab);
ath11k_hal_free_cont_rdp(ab);
ath11k_hal_free_cont_wrp(ab);
kfree(hal->srng_config);
diff --git a/drivers/net/wireless/ath/ath11k/hal.h b/drivers/net/wireless/ath/ath11k/hal.h
index 1f1b29cd0aa39..5fbfded8d546c 100644
--- a/drivers/net/wireless/ath/ath11k/hal.h
+++ b/drivers/net/wireless/ath/ath11k/hal.h
@@ -888,6 +888,8 @@ struct ath11k_hal {
/* shadow register configuration */
u32 shadow_reg_addr[HAL_SHADOW_NUM_REGS];
int num_shadow_reg_configured;
+
+ struct lock_class_key srng_key[HAL_SRNG_RING_ID_MAX];
};
u32 ath11k_hal_reo_qdesc_size(u32 ba_window_size, u8 tid);
--
2.34.1
From: Fugang Duan <[email protected]>
[ Upstream commit 028e083832b06fdeeb290e1e57dc1f6702c4c215 ]
The UCR4_OREN should be disabled before disabling the uart receiver in
.stop_rx() instead of in the .shutdown().
Otherwise, if we have the overrun error during the receiver disable
process, the overrun interrupt will keep trigging until we disable the
OREN interrupt in the .shutdown(), because the ORE status can only be
cleared when read the rx FIFO or reset the controller. Although the
called time between the receiver disable and OREN disable in .shutdown()
is very short, there is still the risk of endless interrupt during this
short period of time. So here change to disable OREN before the receiver
been disabled in .stop_rx().
Signed-off-by: Fugang Duan <[email protected]>
Signed-off-by: Sherry Sun <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/tty/serial/imx.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 28cc328ddb6eb..93cd8ad57f385 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -508,18 +508,21 @@ static void imx_uart_stop_tx(struct uart_port *port)
static void imx_uart_stop_rx(struct uart_port *port)
{
struct imx_port *sport = (struct imx_port *)port;
- u32 ucr1, ucr2;
+ u32 ucr1, ucr2, ucr4;
ucr1 = imx_uart_readl(sport, UCR1);
ucr2 = imx_uart_readl(sport, UCR2);
+ ucr4 = imx_uart_readl(sport, UCR4);
if (sport->dma_is_enabled) {
ucr1 &= ~(UCR1_RXDMAEN | UCR1_ATDMAEN);
} else {
ucr1 &= ~UCR1_RRDYEN;
ucr2 &= ~UCR2_ATEN;
+ ucr4 &= ~UCR4_OREN;
}
imx_uart_writel(sport, ucr1, UCR1);
+ imx_uart_writel(sport, ucr4, UCR4);
ucr2 &= ~UCR2_RXEN;
imx_uart_writel(sport, ucr2, UCR2);
@@ -1576,7 +1579,7 @@ static void imx_uart_shutdown(struct uart_port *port)
imx_uart_writel(sport, ucr1, UCR1);
ucr4 = imx_uart_readl(sport, UCR4);
- ucr4 &= ~(UCR4_OREN | UCR4_TCEN);
+ ucr4 &= ~UCR4_TCEN;
imx_uart_writel(sport, ucr4, UCR4);
spin_unlock_irqrestore(&sport->port.lock, flags);
--
2.34.1
From: Iwona Winiarska <[email protected]>
[ Upstream commit 61a7904b6ace99b1bde0d0e867fa3097f5c8cee2 ]
The gpio-aspeed driver implements an irq_chip which need to be invoked
from hardirq context. Since spin_lock() can sleep with PREEMPT_RT, it is
no longer legal to invoke it while interrupts are disabled.
This also causes lockdep to complain about:
[ 0.649797] [ BUG: Invalid wait context ]
because aspeed_gpio.lock (spin_lock_t) is taken under irq_desc.lock
(raw_spinlock_t).
Let's use of raw_spinlock_t instead of spinlock_t.
Signed-off-by: Iwona Winiarska <[email protected]>
Signed-off-by: Bartosz Golaszewski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpio/gpio-aspeed.c | 52 +++++++++++++++++++-------------------
1 file changed, 26 insertions(+), 26 deletions(-)
diff --git a/drivers/gpio/gpio-aspeed.c b/drivers/gpio/gpio-aspeed.c
index b966f5e28ebff..e0d5d80ec8e0f 100644
--- a/drivers/gpio/gpio-aspeed.c
+++ b/drivers/gpio/gpio-aspeed.c
@@ -53,7 +53,7 @@ struct aspeed_gpio_config {
struct aspeed_gpio {
struct gpio_chip chip;
struct irq_chip irqc;
- spinlock_t lock;
+ raw_spinlock_t lock;
void __iomem *base;
int irq;
const struct aspeed_gpio_config *config;
@@ -413,14 +413,14 @@ static void aspeed_gpio_set(struct gpio_chip *gc, unsigned int offset,
unsigned long flags;
bool copro;
- spin_lock_irqsave(&gpio->lock, flags);
+ raw_spin_lock_irqsave(&gpio->lock, flags);
copro = aspeed_gpio_copro_request(gpio, offset);
__aspeed_gpio_set(gc, offset, val);
if (copro)
aspeed_gpio_copro_release(gpio, offset);
- spin_unlock_irqrestore(&gpio->lock, flags);
+ raw_spin_unlock_irqrestore(&gpio->lock, flags);
}
static int aspeed_gpio_dir_in(struct gpio_chip *gc, unsigned int offset)
@@ -435,7 +435,7 @@ static int aspeed_gpio_dir_in(struct gpio_chip *gc, unsigned int offset)
if (!have_input(gpio, offset))
return -ENOTSUPP;
- spin_lock_irqsave(&gpio->lock, flags);
+ raw_spin_lock_irqsave(&gpio->lock, flags);
reg = ioread32(addr);
reg &= ~GPIO_BIT(offset);
@@ -445,7 +445,7 @@ static int aspeed_gpio_dir_in(struct gpio_chip *gc, unsigned int offset)
if (copro)
aspeed_gpio_copro_release(gpio, offset);
- spin_unlock_irqrestore(&gpio->lock, flags);
+ raw_spin_unlock_irqrestore(&gpio->lock, flags);
return 0;
}
@@ -463,7 +463,7 @@ static int aspeed_gpio_dir_out(struct gpio_chip *gc,
if (!have_output(gpio, offset))
return -ENOTSUPP;
- spin_lock_irqsave(&gpio->lock, flags);
+ raw_spin_lock_irqsave(&gpio->lock, flags);
reg = ioread32(addr);
reg |= GPIO_BIT(offset);
@@ -474,7 +474,7 @@ static int aspeed_gpio_dir_out(struct gpio_chip *gc,
if (copro)
aspeed_gpio_copro_release(gpio, offset);
- spin_unlock_irqrestore(&gpio->lock, flags);
+ raw_spin_unlock_irqrestore(&gpio->lock, flags);
return 0;
}
@@ -492,11 +492,11 @@ static int aspeed_gpio_get_direction(struct gpio_chip *gc, unsigned int offset)
if (!have_output(gpio, offset))
return GPIO_LINE_DIRECTION_IN;
- spin_lock_irqsave(&gpio->lock, flags);
+ raw_spin_lock_irqsave(&gpio->lock, flags);
val = ioread32(bank_reg(gpio, bank, reg_dir)) & GPIO_BIT(offset);
- spin_unlock_irqrestore(&gpio->lock, flags);
+ raw_spin_unlock_irqrestore(&gpio->lock, flags);
return val ? GPIO_LINE_DIRECTION_OUT : GPIO_LINE_DIRECTION_IN;
}
@@ -539,14 +539,14 @@ static void aspeed_gpio_irq_ack(struct irq_data *d)
status_addr = bank_reg(gpio, bank, reg_irq_status);
- spin_lock_irqsave(&gpio->lock, flags);
+ raw_spin_lock_irqsave(&gpio->lock, flags);
copro = aspeed_gpio_copro_request(gpio, offset);
iowrite32(bit, status_addr);
if (copro)
aspeed_gpio_copro_release(gpio, offset);
- spin_unlock_irqrestore(&gpio->lock, flags);
+ raw_spin_unlock_irqrestore(&gpio->lock, flags);
}
static void aspeed_gpio_irq_set_mask(struct irq_data *d, bool set)
@@ -565,7 +565,7 @@ static void aspeed_gpio_irq_set_mask(struct irq_data *d, bool set)
addr = bank_reg(gpio, bank, reg_irq_enable);
- spin_lock_irqsave(&gpio->lock, flags);
+ raw_spin_lock_irqsave(&gpio->lock, flags);
copro = aspeed_gpio_copro_request(gpio, offset);
reg = ioread32(addr);
@@ -577,7 +577,7 @@ static void aspeed_gpio_irq_set_mask(struct irq_data *d, bool set)
if (copro)
aspeed_gpio_copro_release(gpio, offset);
- spin_unlock_irqrestore(&gpio->lock, flags);
+ raw_spin_unlock_irqrestore(&gpio->lock, flags);
}
static void aspeed_gpio_irq_mask(struct irq_data *d)
@@ -629,7 +629,7 @@ static int aspeed_gpio_set_type(struct irq_data *d, unsigned int type)
return -EINVAL;
}
- spin_lock_irqsave(&gpio->lock, flags);
+ raw_spin_lock_irqsave(&gpio->lock, flags);
copro = aspeed_gpio_copro_request(gpio, offset);
addr = bank_reg(gpio, bank, reg_irq_type0);
@@ -649,7 +649,7 @@ static int aspeed_gpio_set_type(struct irq_data *d, unsigned int type)
if (copro)
aspeed_gpio_copro_release(gpio, offset);
- spin_unlock_irqrestore(&gpio->lock, flags);
+ raw_spin_unlock_irqrestore(&gpio->lock, flags);
irq_set_handler_locked(d, handler);
@@ -719,7 +719,7 @@ static int aspeed_gpio_reset_tolerance(struct gpio_chip *chip,
treg = bank_reg(gpio, to_bank(offset), reg_tolerance);
- spin_lock_irqsave(&gpio->lock, flags);
+ raw_spin_lock_irqsave(&gpio->lock, flags);
copro = aspeed_gpio_copro_request(gpio, offset);
val = readl(treg);
@@ -733,7 +733,7 @@ static int aspeed_gpio_reset_tolerance(struct gpio_chip *chip,
if (copro)
aspeed_gpio_copro_release(gpio, offset);
- spin_unlock_irqrestore(&gpio->lock, flags);
+ raw_spin_unlock_irqrestore(&gpio->lock, flags);
return 0;
}
@@ -859,7 +859,7 @@ static int enable_debounce(struct gpio_chip *chip, unsigned int offset,
return rc;
}
- spin_lock_irqsave(&gpio->lock, flags);
+ raw_spin_lock_irqsave(&gpio->lock, flags);
if (timer_allocation_registered(gpio, offset)) {
rc = unregister_allocated_timer(gpio, offset);
@@ -919,7 +919,7 @@ static int enable_debounce(struct gpio_chip *chip, unsigned int offset,
configure_timer(gpio, offset, i);
out:
- spin_unlock_irqrestore(&gpio->lock, flags);
+ raw_spin_unlock_irqrestore(&gpio->lock, flags);
return rc;
}
@@ -930,13 +930,13 @@ static int disable_debounce(struct gpio_chip *chip, unsigned int offset)
unsigned long flags;
int rc;
- spin_lock_irqsave(&gpio->lock, flags);
+ raw_spin_lock_irqsave(&gpio->lock, flags);
rc = unregister_allocated_timer(gpio, offset);
if (!rc)
configure_timer(gpio, offset, 0);
- spin_unlock_irqrestore(&gpio->lock, flags);
+ raw_spin_unlock_irqrestore(&gpio->lock, flags);
return rc;
}
@@ -1018,7 +1018,7 @@ int aspeed_gpio_copro_grab_gpio(struct gpio_desc *desc,
return -EINVAL;
bindex = offset >> 3;
- spin_lock_irqsave(&gpio->lock, flags);
+ raw_spin_lock_irqsave(&gpio->lock, flags);
/* Sanity check, this shouldn't happen */
if (gpio->cf_copro_bankmap[bindex] == 0xff) {
@@ -1039,7 +1039,7 @@ int aspeed_gpio_copro_grab_gpio(struct gpio_desc *desc,
if (bit)
*bit = GPIO_OFFSET(offset);
bail:
- spin_unlock_irqrestore(&gpio->lock, flags);
+ raw_spin_unlock_irqrestore(&gpio->lock, flags);
return rc;
}
EXPORT_SYMBOL_GPL(aspeed_gpio_copro_grab_gpio);
@@ -1063,7 +1063,7 @@ int aspeed_gpio_copro_release_gpio(struct gpio_desc *desc)
return -EINVAL;
bindex = offset >> 3;
- spin_lock_irqsave(&gpio->lock, flags);
+ raw_spin_lock_irqsave(&gpio->lock, flags);
/* Sanity check, this shouldn't happen */
if (gpio->cf_copro_bankmap[bindex] == 0) {
@@ -1077,7 +1077,7 @@ int aspeed_gpio_copro_release_gpio(struct gpio_desc *desc)
aspeed_gpio_change_cmd_source(gpio, bank, bindex,
GPIO_CMDSRC_ARM);
bail:
- spin_unlock_irqrestore(&gpio->lock, flags);
+ raw_spin_unlock_irqrestore(&gpio->lock, flags);
return rc;
}
EXPORT_SYMBOL_GPL(aspeed_gpio_copro_release_gpio);
@@ -1151,7 +1151,7 @@ static int __init aspeed_gpio_probe(struct platform_device *pdev)
if (IS_ERR(gpio->base))
return PTR_ERR(gpio->base);
- spin_lock_init(&gpio->lock);
+ raw_spin_lock_init(&gpio->lock);
gpio_id = of_match_node(aspeed_gpio_of_table, pdev->dev.of_node);
if (!gpio_id)
--
2.34.1
From: Chengfeng Ye <[email protected]>
[ Upstream commit a1ee1c08fcd5af03187dcd41dcab12fd5b379555 ]
cl is freed on error of calling device_register, but this
object is return later, which will cause uaf issue. Fix it
by return NULL on error.
Signed-off-by: Chengfeng Ye <[email protected]>
Signed-off-by: Sebastian Reichel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hsi/hsi_core.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/hsi/hsi_core.c b/drivers/hsi/hsi_core.c
index a5f92e2889cb8..a330f58d45fc6 100644
--- a/drivers/hsi/hsi_core.c
+++ b/drivers/hsi/hsi_core.c
@@ -102,6 +102,7 @@ struct hsi_client *hsi_new_client(struct hsi_port *port,
if (device_register(&cl->device) < 0) {
pr_err("hsi: failed to register client: %s\n", info->name);
put_device(&cl->device);
+ goto err;
}
return cl;
--
2.34.1
From: Antoine Tenart <[email protected]>
[ Upstream commit d7dac083414eb5bb99a6d2ed53dc2c1b405224e5 ]
When updating Rx and Tx queue kobjects, the queue count should always be
updated to match the queue kobjects count. This was not done in the net
device unregistration path, fix it. Tracking all queue count updates
will allow in a following up patch to detect illegal updates.
Signed-off-by: Antoine Tenart <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/core/net-sysfs.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/net/core/net-sysfs.c b/net/core/net-sysfs.c
index af59123601055..99303897b7bb7 100644
--- a/net/core/net-sysfs.c
+++ b/net/core/net-sysfs.c
@@ -1804,6 +1804,9 @@ static void remove_queue_kobjects(struct net_device *dev)
net_rx_queue_update_kobjects(dev, real_rx, 0);
netdev_queue_update_kobjects(dev, real_tx, 0);
+
+ dev->real_num_rx_queues = 0;
+ dev->real_num_tx_queues = 0;
#ifdef CONFIG_SYSFS
kset_unregister(dev->queues_kset);
#endif
--
2.34.1
From: Johannes Berg <[email protected]>
[ Upstream commit 6518f83ffa51131daaf439b66094f684da3fb0ae ]
When CONFIG_DEBUG_TEST_DRIVER_REMOVE is set, iwlwifi crashes
when the opmode module cannot be loaded, due to completing
the completion before using drv->dev, which can then already
be freed.
Fix this by removing the (fairly useless) message. Moving the
completion later causes a deadlock instead, so that's not an
option.
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Luca Coelho <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/intel/iwlwifi/iwl-drv.c | 9 +--------
1 file changed, 1 insertion(+), 8 deletions(-)
diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-drv.c b/drivers/net/wireless/intel/iwlwifi/iwl-drv.c
index 4bdfd6afa7324..30c6d7b18599a 100644
--- a/drivers/net/wireless/intel/iwlwifi/iwl-drv.c
+++ b/drivers/net/wireless/intel/iwlwifi/iwl-drv.c
@@ -1629,15 +1629,8 @@ static void iwl_req_fw_callback(const struct firmware *ucode_raw, void *context)
* else from proceeding if the module fails to load
* or hangs loading.
*/
- if (load_module) {
+ if (load_module)
request_module("%s", op->name);
-#ifdef CONFIG_IWLWIFI_OPMODE_MODULAR
- if (err)
- IWL_ERR(drv,
- "failed to load module %s (error %d), is dynamic loading enabled?\n",
- op->name, err);
-#endif
- }
failure = false;
goto free;
--
2.34.1
From: Stephan Müller <[email protected]>
[ Upstream commit 552d03a223eda3df84526ab2c1f4d82e15eaee7a ]
The APT compares the current time stamp with a pre-set value. The
current code only considered the 4 LSB only. Yet, after reviews by
mathematicians of the user space Jitter RNG version >= 3.1.0, it was
concluded that the APT can be calculated on the 32 LSB of the time
delta. Thi change is applied to the kernel.
This fixes a bug where an AMD EPYC fails this test as its RDTSC value
contains zeros in the LSB. The most appropriate fix would have been to
apply a GCD calculation and divide the time stamp by the GCD. Yet, this
is a significant code change that will be considered for a future
update. Note, tests showed that constantly the GCD always was 32 on
these systems, i.e. the 5 LSB were always zero (thus failing the APT
since it only considered the 4 LSB for its calculation).
Signed-off-by: Stephan Mueller <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
crypto/jitterentropy.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/crypto/jitterentropy.c b/crypto/jitterentropy.c
index 6e147c43fc186..37c4c308339e4 100644
--- a/crypto/jitterentropy.c
+++ b/crypto/jitterentropy.c
@@ -265,7 +265,6 @@ static int jent_stuck(struct rand_data *ec, __u64 current_delta)
{
__u64 delta2 = jent_delta(ec->last_delta, current_delta);
__u64 delta3 = jent_delta(ec->last_delta2, delta2);
- unsigned int delta_masked = current_delta & JENT_APT_WORD_MASK;
ec->last_delta = current_delta;
ec->last_delta2 = delta2;
@@ -274,7 +273,7 @@ static int jent_stuck(struct rand_data *ec, __u64 current_delta)
* Insert the result of the comparison of two back-to-back time
* deltas.
*/
- jent_apt_insert(ec, delta_masked);
+ jent_apt_insert(ec, current_delta);
if (!current_delta || !delta2 || !delta3) {
/* RCT with a stuck bit */
--
2.34.1
From: Alistair Francis <[email protected]>
[ Upstream commit fd8d135b2c5e88662f2729e034913f183455a667 ]
Add a HID_QUIRK_X_INVERT/HID_QUIRK_Y_INVERT quirk that can be used
to invert the X/Y values.
Signed-off-by: Alistair Francis <[email protected]>
[bentiss: silence checkpatch warning]
Signed-off-by: Benjamin Tissoires <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hid/hid-input.c | 6 ++++++
include/linux/hid.h | 2 ++
2 files changed, 8 insertions(+)
diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c
index 580d378342c41..eb53855898c8d 100644
--- a/drivers/hid/hid-input.c
+++ b/drivers/hid/hid-input.c
@@ -1288,6 +1288,12 @@ void hidinput_hid_event(struct hid_device *hid, struct hid_field *field, struct
input = field->hidinput->input;
+ if (usage->type == EV_ABS &&
+ (((*quirks & HID_QUIRK_X_INVERT) && usage->code == ABS_X) ||
+ ((*quirks & HID_QUIRK_Y_INVERT) && usage->code == ABS_Y))) {
+ value = field->logical_maximum - value;
+ }
+
if (usage->hat_min < usage->hat_max || usage->hat_dir) {
int hat_dir = usage->hat_dir;
if (!hat_dir)
diff --git a/include/linux/hid.h b/include/linux/hid.h
index fc56d53cc68bf..2ba33d708942c 100644
--- a/include/linux/hid.h
+++ b/include/linux/hid.h
@@ -345,6 +345,8 @@ struct hid_item {
/* BIT(9) reserved for backward compatibility, was NO_INIT_INPUT_REPORTS */
#define HID_QUIRK_ALWAYS_POLL BIT(10)
#define HID_QUIRK_INPUT_PER_APP BIT(11)
+#define HID_QUIRK_X_INVERT BIT(12)
+#define HID_QUIRK_Y_INVERT BIT(13)
#define HID_QUIRK_SKIP_OUTPUT_REPORTS BIT(16)
#define HID_QUIRK_SKIP_OUTPUT_REPORT_ID BIT(17)
#define HID_QUIRK_NO_OUTPUT_REPORTS_ON_INTR_EP BIT(18)
--
2.34.1
From: Hans de Goede <[email protected]>
[ Upstream commit bdfd6ab8fdccd8b138837efff66f4a1911496378 ]
If the IRQ is already in use, then acpi_dev_gpio_irq_get_by() really
should not change the type underneath the current owner.
I specifically hit an issue with this an a Chuwi Hi8 Super (CWI509) Bay
Trail tablet, when the Boot OS selection in the BIOS is set to Android.
In this case _STA for a MAX17047 ACPI I2C device wrongly returns 0xf and
the _CRS resources for this device include a GpioInt pointing to a GPIO
already in use by an _AEI handler, with a different type then specified
in the _CRS for the MAX17047 device. Leading to the acpi_dev_gpio_irq_get()
call done by the i2c-core-acpi.c code changing the type breaking the
_AEI handler.
Now this clearly is a bug in the DSDT of this tablet (in Android mode),
but in general calling irq_set_irq_type() on an IRQ which already is
in use seems like a bad idea.
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpio/gpiolib-acpi.c | 15 +++++++++++----
1 file changed, 11 insertions(+), 4 deletions(-)
diff --git a/drivers/gpio/gpiolib-acpi.c b/drivers/gpio/gpiolib-acpi.c
index 6f11714ce0239..55e4f402ec8b6 100644
--- a/drivers/gpio/gpiolib-acpi.c
+++ b/drivers/gpio/gpiolib-acpi.c
@@ -969,10 +969,17 @@ int acpi_dev_gpio_irq_get_by(struct acpi_device *adev, const char *name, int ind
irq_flags = acpi_dev_get_irq_type(info.triggering,
info.polarity);
- /* Set type if specified and different than the current one */
- if (irq_flags != IRQ_TYPE_NONE &&
- irq_flags != irq_get_trigger_type(irq))
- irq_set_irq_type(irq, irq_flags);
+ /*
+ * If the IRQ is not already in use then set type
+ * if specified and different than the current one.
+ */
+ if (can_request_irq(irq, irq_flags)) {
+ if (irq_flags != IRQ_TYPE_NONE &&
+ irq_flags != irq_get_trigger_type(irq))
+ irq_set_irq_type(irq, irq_flags);
+ } else {
+ dev_dbg(&adev->dev, "IRQ %d already in use\n", irq);
+ }
return irq;
}
--
2.34.1
From: Zongmin Zhou <[email protected]>
[ Upstream commit 11544d77e3974924c5a9c8a8320b996a3e9b2f8b ]
Some boards(like RX550) seem to have garbage in the upper
16 bits of the vram size register. Check for
this and clamp the size properly. Fixes
boards reporting bogus amounts of vram.
after add this patch,the maximum GPU VRAM size is 64GB,
otherwise only 64GB vram size will be used.
Signed-off-by: Zongmin Zhou<[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c | 13 ++++++++++---
1 file changed, 10 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c b/drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c
index 9ab65ca7df777..873bc33912e23 100644
--- a/drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c
@@ -524,10 +524,10 @@ static void gmc_v8_0_mc_program(struct amdgpu_device *adev)
static int gmc_v8_0_mc_init(struct amdgpu_device *adev)
{
int r;
+ u32 tmp;
adev->gmc.vram_width = amdgpu_atombios_get_vram_width(adev);
if (!adev->gmc.vram_width) {
- u32 tmp;
int chansize, numchan;
/* Get VRAM informations */
@@ -571,8 +571,15 @@ static int gmc_v8_0_mc_init(struct amdgpu_device *adev)
adev->gmc.vram_width = numchan * chansize;
}
/* size in MB on si */
- adev->gmc.mc_vram_size = RREG32(mmCONFIG_MEMSIZE) * 1024ULL * 1024ULL;
- adev->gmc.real_vram_size = RREG32(mmCONFIG_MEMSIZE) * 1024ULL * 1024ULL;
+ tmp = RREG32(mmCONFIG_MEMSIZE);
+ /* some boards may have garbage in the upper 16 bits */
+ if (tmp & 0xffff0000) {
+ DRM_INFO("Probable bad vram size: 0x%08x\n", tmp);
+ if (tmp & 0xffff)
+ tmp &= 0xffff;
+ }
+ adev->gmc.mc_vram_size = tmp * 1024ULL * 1024ULL;
+ adev->gmc.real_vram_size = adev->gmc.mc_vram_size;
if (!(adev->flags & AMD_IS_APU)) {
r = amdgpu_device_resize_fb_bar(adev);
--
2.34.1
From: Russell King (Oracle) <[email protected]>
[ Upstream commit 4e4f325a0a55907b14f579e6b1a38c53755e3de2 ]
The four RGMII interface modes take care of the required RGMII delay
configuration at the PHY and should not be limited by the network MAC
driver. Sadly, gemini was only permitting RGMII mode with no delays,
which would require the required delay to be inserted via PCB tracking
or by the MAC.
However, there are designs that require the PHY to add the delay, which
is impossible without Gemini permitting the other three PHY interface
modes. Fix the driver to allow these.
Signed-off-by: Russell King (Oracle) <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Tested-by: Corentin Labbe <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/cortina/gemini.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/cortina/gemini.c b/drivers/net/ethernet/cortina/gemini.c
index 8df6f081f2447..d11fcfd927c0b 100644
--- a/drivers/net/ethernet/cortina/gemini.c
+++ b/drivers/net/ethernet/cortina/gemini.c
@@ -305,21 +305,21 @@ static void gmac_speed_set(struct net_device *netdev)
switch (phydev->speed) {
case 1000:
status.bits.speed = GMAC_SPEED_1000;
- if (phydev->interface == PHY_INTERFACE_MODE_RGMII)
+ if (phy_interface_mode_is_rgmii(phydev->interface))
status.bits.mii_rmii = GMAC_PHY_RGMII_1000;
netdev_dbg(netdev, "connect %s to RGMII @ 1Gbit\n",
phydev_name(phydev));
break;
case 100:
status.bits.speed = GMAC_SPEED_100;
- if (phydev->interface == PHY_INTERFACE_MODE_RGMII)
+ if (phy_interface_mode_is_rgmii(phydev->interface))
status.bits.mii_rmii = GMAC_PHY_RGMII_100_10;
netdev_dbg(netdev, "connect %s to RGMII @ 100 Mbit\n",
phydev_name(phydev));
break;
case 10:
status.bits.speed = GMAC_SPEED_10;
- if (phydev->interface == PHY_INTERFACE_MODE_RGMII)
+ if (phy_interface_mode_is_rgmii(phydev->interface))
status.bits.mii_rmii = GMAC_PHY_RGMII_100_10;
netdev_dbg(netdev, "connect %s to RGMII @ 10 Mbit\n",
phydev_name(phydev));
@@ -389,6 +389,9 @@ static int gmac_setup_phy(struct net_device *netdev)
status.bits.mii_rmii = GMAC_PHY_GMII;
break;
case PHY_INTERFACE_MODE_RGMII:
+ case PHY_INTERFACE_MODE_RGMII_ID:
+ case PHY_INTERFACE_MODE_RGMII_TXID:
+ case PHY_INTERFACE_MODE_RGMII_RXID:
netdev_dbg(netdev,
"RGMII: set GMAC0 and GMAC1 to MII/RGMII mode\n");
status.bits.mii_rmii = GMAC_PHY_RGMII_100_10;
--
2.34.1
From: Jason A. Donenfeld <[email protected]>
[ Upstream commit 73c7733f122e8d0107f88655a12011f68f69e74b ]
When crng_fast_load() is called by add_hwgenerator_randomness(), we
currently will advance to crng_init==1 once we've acquired 64 bytes, and
then throw away the rest of the buffer. Usually, that is not a problem:
When add_hwgenerator_randomness() gets called via EFI or DT during
setup_arch(), there won't be any IRQ randomness. Therefore, the 64 bytes
passed by EFI exactly matches what is needed to advance to crng_init==1.
Usually, DT seems to pass 64 bytes as well -- with one notable exception
being kexec, which hands over 128 bytes of entropy to the kexec'd kernel.
In that case, we'll advance to crng_init==1 once 64 of those bytes are
consumed by crng_fast_load(), but won't continue onward feeding in bytes
to progress to crng_init==2. This commit fixes the issue by feeding
any leftover bytes into the next phase in add_hwgenerator_randomness().
[[email protected]: rewrite commit message]
Signed-off-by: Dominik Brodowski <[email protected]>
Signed-off-by: Jason A. Donenfeld <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/char/random.c | 19 ++++++++++++-------
1 file changed, 12 insertions(+), 7 deletions(-)
diff --git a/drivers/char/random.c b/drivers/char/random.c
index 8c94380e7a463..5444206f35e22 100644
--- a/drivers/char/random.c
+++ b/drivers/char/random.c
@@ -922,12 +922,14 @@ static struct crng_state *select_crng(void)
/*
* crng_fast_load() can be called by code in the interrupt service
- * path. So we can't afford to dilly-dally.
+ * path. So we can't afford to dilly-dally. Returns the number of
+ * bytes processed from cp.
*/
-static int crng_fast_load(const char *cp, size_t len)
+static size_t crng_fast_load(const char *cp, size_t len)
{
unsigned long flags;
char *p;
+ size_t ret = 0;
if (!spin_trylock_irqsave(&primary_crng.lock, flags))
return 0;
@@ -938,7 +940,7 @@ static int crng_fast_load(const char *cp, size_t len)
p = (unsigned char *) &primary_crng.state[4];
while (len > 0 && crng_init_cnt < CRNG_INIT_CNT_THRESH) {
p[crng_init_cnt % CHACHA_KEY_SIZE] ^= *cp;
- cp++; crng_init_cnt++; len--;
+ cp++; crng_init_cnt++; len--; ret++;
}
spin_unlock_irqrestore(&primary_crng.lock, flags);
if (crng_init_cnt >= CRNG_INIT_CNT_THRESH) {
@@ -946,7 +948,7 @@ static int crng_fast_load(const char *cp, size_t len)
crng_init = 1;
pr_notice("fast init done\n");
}
- return 1;
+ return ret;
}
/*
@@ -1299,7 +1301,7 @@ void add_interrupt_randomness(int irq, int irq_flags)
if (unlikely(crng_init == 0)) {
if ((fast_pool->count >= 64) &&
crng_fast_load((char *) fast_pool->pool,
- sizeof(fast_pool->pool))) {
+ sizeof(fast_pool->pool)) > 0) {
fast_pool->count = 0;
fast_pool->last = now;
}
@@ -2319,8 +2321,11 @@ void add_hwgenerator_randomness(const char *buffer, size_t count,
struct entropy_store *poolp = &input_pool;
if (unlikely(crng_init == 0)) {
- crng_fast_load(buffer, count);
- return;
+ size_t ret = crng_fast_load(buffer, count);
+ count -= ret;
+ buffer += ret;
+ if (!count || crng_init == 0)
+ return;
}
/* Suspend writing if we're above the trickle threshold.
--
2.34.1
From: Martyn Welch <[email protected]>
[ Upstream commit 11632d4aa2b3f126790e81a4415d6c23103cf8bb ]
In the configuration used by the b850v3, the STDP2690 is used to read EDID
data whilst it's the STDP4028 which can detect when monitors are connected.
This can result in problems at boot with monitors connected when the
STDP4028 is probed first, a monitor is detected and an attempt is made to
read the EDID data before the STDP2690 has probed:
[ 3.795721] Unable to handle kernel NULL pointer dereference at virtual address 00000018
[ 3.803845] pgd = (ptrval)
[ 3.806581] [00000018] *pgd=00000000
[ 3.810180] Internal error: Oops: 5 [#1] SMP ARM
[ 3.814813] Modules linked in:
[ 3.817879] CPU: 0 PID: 64 Comm: kworker/u4:1 Not tainted 5.15.0 #1
[ 3.824161] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
[ 3.830705] Workqueue: events_unbound deferred_probe_work_func
[ 3.836565] PC is at stdp2690_get_edid+0x44/0x19c
[ 3.841286] LR is at ge_b850v3_lvds_get_modes+0x2c/0x5c
[ 3.846526] pc : [<805eae10>] lr : [<805eb138>] psr: 80000013
[ 3.852802] sp : 81c359d0 ip : 7dbb550b fp : 81c35a1c
[ 3.858037] r10: 81c73840 r9 : 81c73894 r8 : 816d9800
[ 3.863270] r7 : 00000000 r6 : 81c34000 r5 : 00000000 r4 : 810c35f0
[ 3.869808] r3 : 80e3e294 r2 : 00000080 r1 : 00000cc0 r0 : 81401180
[ 3.876349] Flags: Nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
[ 3.883499] Control: 10c5387d Table: 1000404a DAC: 00000051
[ 3.889254] Register r0 information: slab kmem_cache start 81401180 pointer offset 0
[ 3.897034] Register r1 information: non-paged memory
[ 3.902097] Register r2 information: non-paged memory
[ 3.907160] Register r3 information: non-slab/vmalloc memory
[ 3.912832] Register r4 information: non-slab/vmalloc memory
[ 3.918503] Register r5 information: NULL pointer
[ 3.923217] Register r6 information: non-slab/vmalloc memory
[ 3.928887] Register r7 information: NULL pointer
[ 3.933601] Register r8 information: slab kmalloc-1k start 816d9800 pointer offset 0 size 1024
[ 3.942244] Register r9 information: slab kmalloc-2k start 81c73800 pointer offset 148 size 2048
[ 3.951058] Register r10 information: slab kmalloc-2k start 81c73800 pointer offset 64 size 2048
[ 3.959873] Register r11 information: non-slab/vmalloc memory
[ 3.965632] Register r12 information: non-paged memory
[ 3.970781] Process kworker/u4:1 (pid: 64, stack limit = 0x(ptrval))
[ 3.977148] Stack: (0x81c359d0 to 0x81c36000)
[ 3.981517] 59c0: 80b2b668 80b2b5bc 000002e2 0000034e
[ 3.989712] 59e0: 81c35a8c 816d98e8 81c35a14 7dbb550b 805bfcd0 810c35f0 81c73840 824addc0
[ 3.997906] 5a00: 00001000 816d9800 81c73894 81c73840 81c35a34 81c35a20 805eb138 805eadd8
[ 4.006099] 5a20: 810c35f0 00000045 81c35adc 81c35a38 80594188 805eb118 80d7c788 80dd1848
[ 4.014292] 5a40: 00000000 81c35a50 80dca950 811194d3 80dca7c4 80dca944 80dca91c 816d9800
[ 4.022485] 5a60: 81c34000 81c760a8 816d9800 80c58c98 810c35f0 816d98e8 00001000 00001000
[ 4.030678] 5a80: 00000000 00000000 8017712c 81c60000 00000002 00000001 00000000 00000000
[ 4.038870] 5aa0: 816d9900 816d9900 00000000 7dbb550b 805c700c 00000008 826282c8 826282c8
[ 4.047062] 5ac0: 00001000 81e1ce40 00001000 00000002 81c35bf4 81c35ae0 805d9694 80593fc0
[ 4.055255] 5ae0: 8017a970 80179ad8 00000179 00000000 81c35bcc 81c35b00 80177108 8017a950
[ 4.063447] 5b00: 00000000 81c35b10 81c34000 00000000 81004fd8 81010a38 00000000 00000059
[ 4.071639] 5b20: 816d98d4 81fbb718 00000013 826282c8 8017a940 81c35b40 81134448 00000400
[ 4.079831] 5b40: 00000178 00000000 e063b9c1 00000000 c2000049 00000040 00000000 00000008
[ 4.088024] 5b60: 82628300 82628380 00000000 00000000 81c34000 00000000 81fbb700 82628340
[ 4.096216] 5b80: 826283c0 00001000 00000000 00000010 816d9800 826282c0 801766f8 00000000
[ 4.104408] 5ba0: 00000000 81004fd8 00000049 00000000 00000000 00000001 80dcf940 80178de4
[ 4.112601] 5bc0: 81c35c0c 7dbb550b 80178de4 81fbb700 00000010 00000010 810c35f4 81e1ce40
[ 4.120793] 5be0: 81c40908 0000000c 81c35c64 81c35bf8 805a7f18 805d94a0 81c35c3c 816d9800
[ 4.128985] 5c00: 00000010 81c34000 81c35c2c 81c35c18 8012fce0 805be90c 81c35c3c 81c35c28
[ 4.137178] 5c20: 805be90c 80173210 81fbb600 81fbb6b4 81c35c5c 7dbb550b 81c35c64 81fbb700
[ 4.145370] 5c40: 816d9800 00000010 810c35f4 81e1ce40 81c40908 0000000c 81c35c84 81c35c68
[ 4.153565] 5c60: 805a8c78 805a7ed0 816d9800 81fbb700 00000010 00000000 81c35cac 81c35c88
[ 4.161758] 5c80: 805a8dc4 805a8b68 816d9800 00000000 816d9800 00000000 8179f810 810c42d0
[ 4.169950] 5ca0: 81c35ccc 81c35cb0 805e47b0 805a8d18 824aa240 81e1ea80 81c40908 81126b60
[ 4.178144] 5cc0: 81c35d14 81c35cd0 8060db1c 805e46cc 81c35d14 81c35ce0 80dd90f8 810c4d58
[ 4.186338] 5ce0: 80dd90dc 81fe9740 fffffffe 81fe9740 81e1ea80 00000000 810c4d6c 80c4b95c
[ 4.194531] 5d00: 80dd9a3c 815c6810 81c35d34 81c35d18 8060dc9c 8060d8fc 8246b440 815c6800
[ 4.202724] 5d20: 815c6810 eefd8e00 81c35d44 81c35d38 8060dd80 8060dbec 81c35d6c 81c35d48
[ 4.210918] 5d40: 805e98a4 8060dd70 00000000 815c6810 810c45b0 81126e90 81126e90 80dd9a3c
[ 4.219112] 5d60: 81c35d8c 81c35d70 80619574 805e9808 815c6810 00000000 810c45b0 81126e90
[ 4.227305] 5d80: 81c35db4 81c35d90 806168dc 80619514 80625df0 80623c80 815c6810 810c45b0
[ 4.235498] 5da0: 81c35e6c 815c6810 81c35dec 81c35db8 80616d04 80616800 81c35de4 81c35dc8
[ 4.243691] 5dc0: 808382b0 80b2f444 8116e310 8116e314 81c35e6c 815c6810 00000003 80dd9a3c
[ 4.251884] 5de0: 81c35e14 81c35df0 80616ec8 80616c60 00000001 810c45b0 81c35e6c 815c6810
[ 4.260076] 5e00: 00000001 80dd9a3c 81c35e34 81c35e18 80617338 80616e90 00000000 81c35e6c
[ 4.268269] 5e20: 80617284 81c34000 81c35e64 81c35e38 80614730 80617290 81c35e64 8171a06c
[ 4.276461] 5e40: 81e220b8 7dbb550b 815c6810 81c34000 815c6854 81126e90 81c35e9c 81c35e68
[ 4.284654] 5e60: 8061673c 806146a8 8060f5e0 815c6810 00000001 7dbb550b 00000000 810c5080
[ 4.292847] 5e80: 810c5320 815c6810 81126e90 00000000 81c35eac 81c35ea0 80617554 80616650
[ 4.301040] 5ea0: 81c35ecc 81c35eb0 80615694 80617544 810c5080 810c5080 810c5094 81126e90
[ 4.309233] 5ec0: 81c35efc 81c35ed0 80615c6c 8061560c 80615bc0 810c50c0 817eeb00 81412800
[ 4.317425] 5ee0: 814c3000 00000000 814c300d 81119a60 81c35f3c 81c35f00 80141488 80615bcc
[ 4.325618] 5f00: 81c60000 81c34000 81c35f24 81c35f18 80143078 817eeb00 81412800 817eeb18
[ 4.333811] 5f20: 81412818 81003d00 00000088 81412800 81c35f74 81c35f40 80141a48 80141298
[ 4.342005] 5f40: 81c35f74 81c34000 801481ac 817efa40 817efc00 801417d8 817eeb00 00000000
[ 4.350199] 5f60: 815a7e7c 81c34000 81c35fac 81c35f78 80149b1c 801417e4 817efc20 817efc20
[ 4.358391] 5f80: ffffe000 817efa40 801499a8 00000000 00000000 00000000 00000000 00000000
[ 4.366583] 5fa0: 00000000 81c35fb0 80100130 801499b4 00000000 00000000 00000000 00000000
[ 4.374774] 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 4.382966] 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
[ 4.391155] Backtrace:
[ 4.393613] [<805eadcc>] (stdp2690_get_edid) from [<805eb138>] (ge_b850v3_lvds_get_modes+0x2c/0x5c)
[ 4.402691] r10:81c73840 r9:81c73894 r8:816d9800 r7:00001000 r6:824addc0 r5:81c73840
[ 4.410534] r4:810c35f0
[ 4.413073] [<805eb10c>] (ge_b850v3_lvds_get_modes) from [<80594188>] (drm_helper_probe_single_connector_modes+0x1d4/0x84c)
[ 4.424240] r5:00000045 r4:810c35f0
[ 4.427822] [<80593fb4>] (drm_helper_probe_single_connector_modes) from [<805d9694>] (drm_client_modeset_probe+0x200/0x1384)
[ 4.439074] r10:00000002 r9:00001000 r8:81e1ce40 r7:00001000 r6:826282c8 r5:826282c8
[ 4.446917] r4:00000008
[ 4.449455] [<805d9494>] (drm_client_modeset_probe) from [<805a7f18>] (__drm_fb_helper_initial_config_and_unlock+0x54/0x5b4)
[ 4.460713] r10:0000000c r9:81c40908 r8:81e1ce40 r7:810c35f4 r6:00000010 r5:00000010
[ 4.468556] r4:81fbb700
[ 4.471095] [<805a7ec4>] (__drm_fb_helper_initial_config_and_unlock) from [<805a8c78>] (drm_fbdev_client_hotplug+0x11c/0x1b0)
[ 4.482434] r10:0000000c r9:81c40908 r8:81e1ce40 r7:810c35f4 r6:00000010 r5:816d9800
[ 4.490276] r4:81fbb700
[ 4.492814] [<805a8b5c>] (drm_fbdev_client_hotplug) from [<805a8dc4>] (drm_fbdev_generic_setup+0xb8/0x1a4)
[ 4.502494] r7:00000000 r6:00000010 r5:81fbb700 r4:816d9800
[ 4.508160] [<805a8d0c>] (drm_fbdev_generic_setup) from [<805e47b0>] (imx_drm_bind+0xf0/0x130)
[ 4.516805] r7:810c42d0 r6:8179f810 r5:00000000 r4:816d9800
[ 4.522474] [<805e46c0>] (imx_drm_bind) from [<8060db1c>] (try_to_bring_up_master+0x22c/0x2f0)
[ 4.531116] r7:81126b60 r6:81c40908 r5:81e1ea80 r4:824aa240
[ 4.536783] [<8060d8f0>] (try_to_bring_up_master) from [<8060dc9c>] (__component_add+0xbc/0x184)
[ 4.545597] r10:815c6810 r9:80dd9a3c r8:80c4b95c r7:810c4d6c r6:00000000 r5:81e1ea80
[ 4.553440] r4:81fe9740
[ 4.555980] [<8060dbe0>] (__component_add) from [<8060dd80>] (component_add+0x1c/0x20)
[ 4.563921] r7:eefd8e00 r6:815c6810 r5:815c6800 r4:8246b440
[ 4.569589] [<8060dd64>] (component_add) from [<805e98a4>] (dw_hdmi_imx_probe+0xa8/0xe8)
[ 4.577702] [<805e97fc>] (dw_hdmi_imx_probe) from [<80619574>] (platform_probe+0x6c/0xc8)
[ 4.585908] r9:80dd9a3c r8:81126e90 r7:81126e90 r6:810c45b0 r5:815c6810 r4:00000000
[ 4.593662] [<80619508>] (platform_probe) from [<806168dc>] (really_probe+0xe8/0x460)
[ 4.601524] r7:81126e90 r6:810c45b0 r5:00000000 r4:815c6810
[ 4.607191] [<806167f4>] (really_probe) from [<80616d04>] (__driver_probe_device+0xb0/0x230)
[ 4.615658] r7:815c6810 r6:81c35e6c r5:810c45b0 r4:815c6810
[ 4.621326] [<80616c54>] (__driver_probe_device) from [<80616ec8>] (driver_probe_device+0x44/0xe0)
[ 4.630313] r9:80dd9a3c r8:00000003 r7:815c6810 r6:81c35e6c r5:8116e314 r4:8116e310
[ 4.638068] [<80616e84>] (driver_probe_device) from [<80617338>] (__device_attach_driver+0xb4/0x12c)
[ 4.647227] r9:80dd9a3c r8:00000001 r7:815c6810 r6:81c35e6c r5:810c45b0 r4:00000001
[ 4.654981] [<80617284>] (__device_attach_driver) from [<80614730>] (bus_for_each_drv+0x94/0xd8)
[ 4.663794] r7:81c34000 r6:80617284 r5:81c35e6c r4:00000000
[ 4.669461] [<8061469c>] (bus_for_each_drv) from [<8061673c>] (__device_attach+0xf8/0x190)
[ 4.677753] r7:81126e90 r6:815c6854 r5:81c34000 r4:815c6810
[ 4.683419] [<80616644>] (__device_attach) from [<80617554>] (device_initial_probe+0x1c/0x20)
[ 4.691971] r8:00000000 r7:81126e90 r6:815c6810 r5:810c5320 r4:810c5080
[ 4.698681] [<80617538>] (device_initial_probe) from [<80615694>] (bus_probe_device+0x94/0x9c)
[ 4.707318] [<80615600>] (bus_probe_device) from [<80615c6c>] (deferred_probe_work_func+0xac/0xf0)
[ 4.716305] r7:81126e90 r6:810c5094 r5:810c5080 r4:810c5080
[ 4.721973] [<80615bc0>] (deferred_probe_work_func) from [<80141488>] (process_one_work+0x1fc/0x54c)
[ 4.731139] r10:81119a60 r9:814c300d r8:00000000 r7:814c3000 r6:81412800 r5:817eeb00
[ 4.738981] r4:810c50c0 r3:80615bc0
[ 4.742563] [<8014128c>] (process_one_work) from [<80141a48>] (worker_thread+0x270/0x570)
[ 4.750765] r10:81412800 r9:00000088 r8:81003d00 r7:81412818 r6:817eeb18 r5:81412800
[ 4.758608] r4:817eeb00
[ 4.761147] [<801417d8>] (worker_thread) from [<80149b1c>] (kthread+0x174/0x190)
[ 4.768574] r10:81c34000 r9:815a7e7c r8:00000000 r7:817eeb00 r6:801417d8 r5:817efc00
[ 4.776417] r4:817efa40
[ 4.778955] [<801499a8>] (kthread) from [<80100130>] (ret_from_fork+0x14/0x24)
[ 4.786201] Exception stack(0x81c35fb0 to 0x81c35ff8)
[ 4.791266] 5fa0: 00000000 00000000 00000000 00000000
[ 4.799459] 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 4.807651] 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000
[ 4.814279] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:801499a8
[ 4.822120] r4:817efa40
[ 4.824664] Code: e3a02080 e593001c e3a01d33 e3a05000 (e5979018)
Split the registration from the STDP4028 probe routine and only perform
registration once both the STDP4028 and STDP2690 have probed.
Signed-off-by: Martyn Welch <[email protected]>
CC: Peter Senna Tschudin <[email protected]>
CC: Martyn Welch <[email protected]>
CC: Neil Armstrong <[email protected]>
CC: Robert Foss <[email protected]>
CC: Laurent Pinchart <[email protected]>
CC: Jonas Karlman <[email protected]>
CC: Jernej Skrabec <[email protected]>
Signed-off-by: Robert Foss <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/43552c3404e8fdf92d8bc5658fac24e9f03c2c57.1637836606.git.martyn.welch@collabora.com
Signed-off-by: Sasha Levin <[email protected]>
---
.../bridge/megachips-stdpxxxx-ge-b850v3-fw.c | 40 +++++++++++++------
1 file changed, 28 insertions(+), 12 deletions(-)
diff --git a/drivers/gpu/drm/bridge/megachips-stdpxxxx-ge-b850v3-fw.c b/drivers/gpu/drm/bridge/megachips-stdpxxxx-ge-b850v3-fw.c
index d2808c4a6fb1c..cce98bf2a4e73 100644
--- a/drivers/gpu/drm/bridge/megachips-stdpxxxx-ge-b850v3-fw.c
+++ b/drivers/gpu/drm/bridge/megachips-stdpxxxx-ge-b850v3-fw.c
@@ -306,19 +306,10 @@ out:
mutex_unlock(&ge_b850v3_lvds_dev_mutex);
}
-static int stdp4028_ge_b850v3_fw_probe(struct i2c_client *stdp4028_i2c,
- const struct i2c_device_id *id)
+static int ge_b850v3_register(void)
{
+ struct i2c_client *stdp4028_i2c = ge_b850v3_lvds_ptr->stdp4028_i2c;
struct device *dev = &stdp4028_i2c->dev;
- int ret;
-
- ret = ge_b850v3_lvds_init(dev);
-
- if (ret)
- return ret;
-
- ge_b850v3_lvds_ptr->stdp4028_i2c = stdp4028_i2c;
- i2c_set_clientdata(stdp4028_i2c, ge_b850v3_lvds_ptr);
/* drm bridge initialization */
ge_b850v3_lvds_ptr->bridge.funcs = &ge_b850v3_lvds_funcs;
@@ -343,6 +334,27 @@ static int stdp4028_ge_b850v3_fw_probe(struct i2c_client *stdp4028_i2c,
"ge-b850v3-lvds-dp", ge_b850v3_lvds_ptr);
}
+static int stdp4028_ge_b850v3_fw_probe(struct i2c_client *stdp4028_i2c,
+ const struct i2c_device_id *id)
+{
+ struct device *dev = &stdp4028_i2c->dev;
+ int ret;
+
+ ret = ge_b850v3_lvds_init(dev);
+
+ if (ret)
+ return ret;
+
+ ge_b850v3_lvds_ptr->stdp4028_i2c = stdp4028_i2c;
+ i2c_set_clientdata(stdp4028_i2c, ge_b850v3_lvds_ptr);
+
+ /* Only register after both bridges are probed */
+ if (!ge_b850v3_lvds_ptr->stdp2690_i2c)
+ return 0;
+
+ return ge_b850v3_register();
+}
+
static int stdp4028_ge_b850v3_fw_remove(struct i2c_client *stdp4028_i2c)
{
ge_b850v3_lvds_remove();
@@ -386,7 +398,11 @@ static int stdp2690_ge_b850v3_fw_probe(struct i2c_client *stdp2690_i2c,
ge_b850v3_lvds_ptr->stdp2690_i2c = stdp2690_i2c;
i2c_set_clientdata(stdp2690_i2c, ge_b850v3_lvds_ptr);
- return 0;
+ /* Only register after both bridges are probed */
+ if (!ge_b850v3_lvds_ptr->stdp4028_i2c)
+ return 0;
+
+ return ge_b850v3_register();
}
static int stdp2690_ge_b850v3_fw_remove(struct i2c_client *stdp2690_i2c)
--
2.34.1
From: Danielle Ratson <[email protected]>
[ Upstream commit c1020d3cf4752f61a6a413f632ea2ce2370e150d ]
On an arm64 platform with the Spectrum ASIC, after loading and executing
a new kernel via kexec, the following trace [1] is observed. This seems
to be caused by the fact that the device is not properly shutdown before
executing the new kernel.
Fix this by implementing a shutdown method which mirrors the remove
method, as recommended by the kexec maintainer [2][3].
[1]
BUG: Bad page state in process devlink pfn:22f73d
page:fffffe00089dcf40 refcount:-1 mapcount:0 mapping:0000000000000000 index:0x0
flags: 0x2ffff00000000000()
raw: 2ffff00000000000 0000000000000000 ffffffff089d0201 0000000000000000
raw: 0000000000000000 0000000000000000 ffffffffffffffff 0000000000000000
page dumped because: nonzero _refcount
Modules linked in:
CPU: 1 PID: 16346 Comm: devlink Tainted: G B 5.8.0-rc6-custom-273020-gac6b365b1bf5 #44
Hardware name: Marvell Armada 7040 TX4810M (DT)
Call trace:
dump_backtrace+0x0/0x1d0
show_stack+0x1c/0x28
dump_stack+0xbc/0x118
bad_page+0xcc/0xf8
check_free_page_bad+0x80/0x88
__free_pages_ok+0x3f8/0x418
__free_pages+0x38/0x60
kmem_freepages+0x200/0x2a8
slab_destroy+0x28/0x68
slabs_destroy+0x60/0x90
___cache_free+0x1b4/0x358
kfree+0xc0/0x1d0
skb_free_head+0x2c/0x38
skb_release_data+0x110/0x1a0
skb_release_all+0x2c/0x38
consume_skb+0x38/0x130
__dev_kfree_skb_any+0x44/0x50
mlxsw_pci_rdq_fini+0x8c/0xb0
mlxsw_pci_queue_fini.isra.0+0x28/0x58
mlxsw_pci_queue_group_fini+0x58/0x88
mlxsw_pci_aqs_fini+0x2c/0x60
mlxsw_pci_fini+0x34/0x50
mlxsw_core_bus_device_unregister+0x104/0x1d0
mlxsw_devlink_core_bus_device_reload_down+0x2c/0x48
devlink_reload+0x44/0x158
devlink_nl_cmd_reload+0x270/0x290
genl_rcv_msg+0x188/0x2f0
netlink_rcv_skb+0x5c/0x118
genl_rcv+0x3c/0x50
netlink_unicast+0x1bc/0x278
netlink_sendmsg+0x194/0x390
__sys_sendto+0xe0/0x158
__arm64_sys_sendto+0x2c/0x38
el0_svc_common.constprop.0+0x70/0x168
do_el0_svc+0x28/0x88
el0_sync_handler+0x88/0x190
el0_sync+0x140/0x180
[2]
https://www.mail-archive.com/[email protected]/msg1195432.html
[3]
https://patchwork.kernel.org/project/linux-scsi/patch/[email protected]/#20116693
Cc: Eric Biederman <[email protected]>
Signed-off-by: Danielle Ratson <[email protected]>
Signed-off-by: Ido Schimmel <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/mellanox/mlxsw/pci.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/ethernet/mellanox/mlxsw/pci.c b/drivers/net/ethernet/mellanox/mlxsw/pci.c
index ffaeda75eec42..72d5c77bcb949 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/pci.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/pci.c
@@ -1900,6 +1900,7 @@ int mlxsw_pci_driver_register(struct pci_driver *pci_driver)
{
pci_driver->probe = mlxsw_pci_probe;
pci_driver->remove = mlxsw_pci_remove;
+ pci_driver->shutdown = mlxsw_pci_remove;
return pci_register_driver(pci_driver);
}
EXPORT_SYMBOL(mlxsw_pci_driver_register);
--
2.34.1
From: Ilan Peer <[email protected]>
[ Upstream commit 40a0b38d7a7f91a6027287e0df54f5f547e8d27e ]
The RADA might include in the Rx frame the MIC and CRC bytes.
These bytes should be removed for non monitor interfaces and
should not be passed to mac80211.
Fix the Rx processing to remove the extra bytes on non monitor
cases.
Signed-off-by: Ilan Peer <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20211219121514.098be12c801e.I1d81733d8a75b84c3b20eb6e0d14ab3405ca6a86@changeid
Signed-off-by: Luca Coelho <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c | 27 +++++++++++++++++++
1 file changed, 27 insertions(+)
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c b/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c
index 838734fec5023..86b3fb321dfdd 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c
@@ -177,12 +177,39 @@ static int iwl_mvm_create_skb(struct iwl_mvm *mvm, struct sk_buff *skb,
struct iwl_rx_mpdu_desc *desc = (void *)pkt->data;
unsigned int headlen, fraglen, pad_len = 0;
unsigned int hdrlen = ieee80211_hdrlen(hdr->frame_control);
+ u8 mic_crc_len = u8_get_bits(desc->mac_flags1,
+ IWL_RX_MPDU_MFLG1_MIC_CRC_LEN_MASK) << 1;
if (desc->mac_flags2 & IWL_RX_MPDU_MFLG2_PAD) {
len -= 2;
pad_len = 2;
}
+ /*
+ * For non monitor interface strip the bytes the RADA might not have
+ * removed. As monitor interface cannot exist with other interfaces
+ * this removal is safe.
+ */
+ if (mic_crc_len && !ieee80211_hw_check(mvm->hw, RX_INCLUDES_FCS)) {
+ u32 pkt_flags = le32_to_cpu(pkt->len_n_flags);
+
+ /*
+ * If RADA was not enabled then decryption was not performed so
+ * the MIC cannot be removed.
+ */
+ if (!(pkt_flags & FH_RSCSR_RADA_EN)) {
+ if (WARN_ON(crypt_len > mic_crc_len))
+ return -EINVAL;
+
+ mic_crc_len -= crypt_len;
+ }
+
+ if (WARN_ON(mic_crc_len > len))
+ return -EINVAL;
+
+ len -= mic_crc_len;
+ }
+
/* If frame is small enough to fit in skb->head, pull it completely.
* If not, only pull ieee80211_hdr (including crypto if present, and
* an additional 8 bytes for SNAP/ethertype, see below) so that
--
2.34.1
From: Lucas Stach <[email protected]>
[ Upstream commit cdd156955f946beaa5f3a00d8ccf90e5a197becc ]
Some GPU heavy test programs manage to trigger the hangcheck quite often.
If there are no other GPU users in the system and the test program
exhibits a very regular structure in the commandstreams that are being
submitted, we can end up with two distinct submits managing to trigger
the hangcheck with the FE in a very similar address range. This leads
the hangcheck to believe that the GPU is stuck, while in reality the GPU
is already busy working on a different job. To avoid those spurious
GPU resets, also remember and consider the last completed fence seqno
in the hang check.
Reported-by: Joerg Albert <[email protected]>
Signed-off-by: Lucas Stach <[email protected]>
Reviewed-by: Christian Gmeiner <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/etnaviv/etnaviv_gpu.h | 1 +
drivers/gpu/drm/etnaviv/etnaviv_sched.c | 4 +++-
2 files changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/etnaviv/etnaviv_gpu.h b/drivers/gpu/drm/etnaviv/etnaviv_gpu.h
index 1c75c8ed5bcea..85eddd492774d 100644
--- a/drivers/gpu/drm/etnaviv/etnaviv_gpu.h
+++ b/drivers/gpu/drm/etnaviv/etnaviv_gpu.h
@@ -130,6 +130,7 @@ struct etnaviv_gpu {
/* hang detection */
u32 hangcheck_dma_addr;
+ u32 hangcheck_fence;
void __iomem *mmio;
int irq;
diff --git a/drivers/gpu/drm/etnaviv/etnaviv_sched.c b/drivers/gpu/drm/etnaviv/etnaviv_sched.c
index cd46c882269cc..026b6c0731198 100644
--- a/drivers/gpu/drm/etnaviv/etnaviv_sched.c
+++ b/drivers/gpu/drm/etnaviv/etnaviv_sched.c
@@ -106,8 +106,10 @@ static void etnaviv_sched_timedout_job(struct drm_sched_job *sched_job)
*/
dma_addr = gpu_read(gpu, VIVS_FE_DMA_ADDRESS);
change = dma_addr - gpu->hangcheck_dma_addr;
- if (change < 0 || change > 16) {
+ if (gpu->completed_fence != gpu->hangcheck_fence ||
+ change < 0 || change > 16) {
gpu->hangcheck_dma_addr = dma_addr;
+ gpu->hangcheck_fence = gpu->completed_fence;
goto out_no_timeout;
}
--
2.34.1
From: Joerg Roedel <[email protected]>
[ Upstream commit 71d5049b053876afbde6c3273250b76935494ab2 ]
Move the switching code into a function so that it can be re-used and
add a global TLB flush. This makes sure that usage of memory which is
not mapped in the trampoline page-table is reliably caught.
Also move the clearing of CR4.PCIDE before the CR3 switch because the
cr4_clear_bits() function will access data not mapped into the
trampoline page-table.
Signed-off-by: Joerg Roedel <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/include/asm/realmode.h | 1 +
arch/x86/kernel/reboot.c | 12 ++----------
arch/x86/realmode/init.c | 26 ++++++++++++++++++++++++++
3 files changed, 29 insertions(+), 10 deletions(-)
diff --git a/arch/x86/include/asm/realmode.h b/arch/x86/include/asm/realmode.h
index 5db5d083c8732..331474b150f16 100644
--- a/arch/x86/include/asm/realmode.h
+++ b/arch/x86/include/asm/realmode.h
@@ -89,6 +89,7 @@ static inline void set_real_mode_mem(phys_addr_t mem)
}
void reserve_real_mode(void);
+void load_trampoline_pgtable(void);
#endif /* __ASSEMBLY__ */
diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index 798a6f73f8946..df3514835b356 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -113,17 +113,9 @@ void __noreturn machine_real_restart(unsigned int type)
spin_unlock(&rtc_lock);
/*
- * Switch back to the initial page table.
+ * Switch to the trampoline page table.
*/
-#ifdef CONFIG_X86_32
- load_cr3(initial_page_table);
-#else
- write_cr3(real_mode_header->trampoline_pgd);
-
- /* Exiting long mode will fail if CR4.PCIDE is set. */
- if (boot_cpu_has(X86_FEATURE_PCID))
- cr4_clear_bits(X86_CR4_PCIDE);
-#endif
+ load_trampoline_pgtable();
/* Jump to the identity-mapped low memory code */
#ifdef CONFIG_X86_32
diff --git a/arch/x86/realmode/init.c b/arch/x86/realmode/init.c
index 3313bffbecd4d..1a702c6a226ec 100644
--- a/arch/x86/realmode/init.c
+++ b/arch/x86/realmode/init.c
@@ -17,6 +17,32 @@ u32 *trampoline_cr4_features;
/* Hold the pgd entry used on booting additional CPUs */
pgd_t trampoline_pgd_entry;
+void load_trampoline_pgtable(void)
+{
+#ifdef CONFIG_X86_32
+ load_cr3(initial_page_table);
+#else
+ /*
+ * This function is called before exiting to real-mode and that will
+ * fail with CR4.PCIDE still set.
+ */
+ if (boot_cpu_has(X86_FEATURE_PCID))
+ cr4_clear_bits(X86_CR4_PCIDE);
+
+ write_cr3(real_mode_header->trampoline_pgd);
+#endif
+
+ /*
+ * The CR3 write above will not flush global TLB entries.
+ * Stale, global entries from previous page tables may still be
+ * present. Flush those stale entries.
+ *
+ * This ensures that memory accessed while running with
+ * trampoline_pgd is *actually* mapped into trampoline_pgd.
+ */
+ __flush_tlb_all();
+}
+
void __init reserve_real_mode(void)
{
phys_addr_t mem;
--
2.34.1
From: Luca Coelho <[email protected]>
[ Upstream commit 459fc0f2c6b0f6e280bfa0f230c100c9dfe3a199 ]
In some rare cases when the HW is in a bad state, we may get this
interrupt when prph_info is not set yet. Then we will try to
dereference it to check the sleep_notif element, which will cause an
oops.
Fix that by ignoring the interrupt if prph_info is not set yet.
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20211219132536.0537aa562313.I183bb336345b9b3da196ba9e596a6f189fbcbd09@changeid
Signed-off-by: Luca Coelho <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/intel/iwlwifi/pcie/rx.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/rx.c b/drivers/net/wireless/intel/iwlwifi/pcie/rx.c
index 2c13fa8f28200..6aedf5762571d 100644
--- a/drivers/net/wireless/intel/iwlwifi/pcie/rx.c
+++ b/drivers/net/wireless/intel/iwlwifi/pcie/rx.c
@@ -2260,7 +2260,12 @@ irqreturn_t iwl_pcie_irq_msix_handler(int irq, void *dev_id)
}
}
- if (inta_hw & MSIX_HW_INT_CAUSES_REG_WAKEUP) {
+ /*
+ * In some rare cases when the HW is in a bad state, we may
+ * get this interrupt too early, when prph_info is still NULL.
+ * So make sure that it's not NULL to prevent crashing.
+ */
+ if (inta_hw & MSIX_HW_INT_CAUSES_REG_WAKEUP && trans_pcie->prph_info) {
u32 sleep_notif =
le32_to_cpu(trans_pcie->prph_info->sleep_notif);
if (sleep_notif == IWL_D3_SLEEP_STATUS_SUSPEND ||
--
2.34.1
From: Zekun Shen <[email protected]>
[ Upstream commit 04d80663f67ccef893061b49ec8a42ff7045ae84 ]
Currently, with an unknown recv_type, mwifiex_usb_recv
just return -1 without restoring the skb. Next time
mwifiex_usb_rx_complete is invoked with the same skb,
calling skb_put causes skb_over_panic.
The bug is triggerable with a compromised/malfunctioning
usb device. After applying the patch, skb_over_panic
no longer shows up with the same input.
Attached is the panic report from fuzzing.
skbuff: skb_over_panic: text:000000003bf1b5fa
len:2048 put:4 head:00000000dd6a115b data:000000000a9445d8
tail:0x844 end:0x840 dev:<NULL>
kernel BUG at net/core/skbuff.c:109!
invalid opcode: 0000 [#1] SMP KASAN NOPTI
CPU: 0 PID: 198 Comm: in:imklog Not tainted 5.6.0 #60
RIP: 0010:skb_panic+0x15f/0x161
Call Trace:
<IRQ>
? mwifiex_usb_rx_complete+0x26b/0xfcd [mwifiex_usb]
skb_put.cold+0x24/0x24
mwifiex_usb_rx_complete+0x26b/0xfcd [mwifiex_usb]
__usb_hcd_giveback_urb+0x1e4/0x380
usb_giveback_urb_bh+0x241/0x4f0
? __hrtimer_run_queues+0x316/0x740
? __usb_hcd_giveback_urb+0x380/0x380
tasklet_action_common.isra.0+0x135/0x330
__do_softirq+0x18c/0x634
irq_exit+0x114/0x140
smp_apic_timer_interrupt+0xde/0x380
apic_timer_interrupt+0xf/0x20
</IRQ>
Reported-by: Brendan Dolan-Gavitt <[email protected]>
Signed-off-by: Zekun Shen <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/marvell/mwifiex/usb.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/marvell/mwifiex/usb.c b/drivers/net/wireless/marvell/mwifiex/usb.c
index 9736aa0ab7fd4..8f01fcbe93961 100644
--- a/drivers/net/wireless/marvell/mwifiex/usb.c
+++ b/drivers/net/wireless/marvell/mwifiex/usb.c
@@ -130,7 +130,8 @@ static int mwifiex_usb_recv(struct mwifiex_adapter *adapter,
default:
mwifiex_dbg(adapter, ERROR,
"unknown recv_type %#x\n", recv_type);
- return -1;
+ ret = -1;
+ goto exit_restore_skb;
}
break;
case MWIFIEX_USB_EP_DATA:
--
2.34.1
From: Ammar Faizi <[email protected]>
[ Upstream commit 18dbfcdedc802f9500b2c29794f22a31d27639c0 ]
Commit 930914b7d528fc ("powerpc/xive: Add a debugfs file to dump
internal XIVE state") forgot to add a null check.
Add it.
Fixes: 930914b7d528fc6b0249bffc00564100bcf6ef75 ("powerpc/xive: Add a debugfs file to dump internal XIVE state")
Signed-off-by: Ammar Faizi <[email protected]>
Reviewed-by: Cédric Le Goater <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/sysdev/xive/spapr.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/powerpc/sysdev/xive/spapr.c b/arch/powerpc/sysdev/xive/spapr.c
index 1e3674d7ea7bc..b57eeaff7bb33 100644
--- a/arch/powerpc/sysdev/xive/spapr.c
+++ b/arch/powerpc/sysdev/xive/spapr.c
@@ -658,6 +658,9 @@ static int xive_spapr_debug_show(struct seq_file *m, void *private)
struct xive_irq_bitmap *xibm;
char *buf = kmalloc(PAGE_SIZE, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
list_for_each_entry(xibm, &xive_irq_bitmaps, list) {
memset(buf, 0, PAGE_SIZE);
bitmap_print_to_pagebuf(true, buf, xibm->bitmap, xibm->count);
--
2.34.1
From: Brian Norris <[email protected]>
[ Upstream commit 1b8bb8919ef81bfc8873d223b9361f1685f2106d ]
Quoting Jia-Ju Bai <[email protected]>:
mwifiex_dequeue_tx_packet()
spin_lock_bh(&priv->wmm.ra_list_spinlock); --> Line 1432 (Lock A)
mwifiex_send_addba()
spin_lock_bh(&priv->sta_list_spinlock); --> Line 608 (Lock B)
mwifiex_process_sta_tx_pause()
spin_lock_bh(&priv->sta_list_spinlock); --> Line 398 (Lock B)
mwifiex_update_ralist_tx_pause()
spin_lock_bh(&priv->wmm.ra_list_spinlock); --> Line 941 (Lock A)
Similar report for mwifiex_process_uap_tx_pause().
While the locking expectations in this driver are a bit unclear, the
Fixed commit only intended to protect the sta_ptr, so we can drop the
lock as soon as we're done with it.
IIUC, this deadlock cannot actually happen, because command event
processing (which calls mwifiex_process_sta_tx_pause()) is
sequentialized with TX packet processing (e.g.,
mwifiex_dequeue_tx_packet()) via the main loop (mwifiex_main_process()).
But it's good not to leave this potential issue lurking.
Fixes: f0f7c2275fb9 ("mwifiex: minor cleanups w/ sta_list_spinlock in cfg80211.c")
Cc: Douglas Anderson <[email protected]>
Reported-by: TOTE Robot <[email protected]>
Link: https://lore.kernel.org/linux-wireless/[email protected]/
Signed-off-by: Brian Norris <[email protected]>
Reviewed-by: Douglas Anderson <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/YaV0pllJ5p/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/marvell/mwifiex/sta_event.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/marvell/mwifiex/sta_event.c b/drivers/net/wireless/marvell/mwifiex/sta_event.c
index bc79ca4cb803c..753458628f86a 100644
--- a/drivers/net/wireless/marvell/mwifiex/sta_event.c
+++ b/drivers/net/wireless/marvell/mwifiex/sta_event.c
@@ -364,10 +364,12 @@ static void mwifiex_process_uap_tx_pause(struct mwifiex_private *priv,
sta_ptr = mwifiex_get_sta_entry(priv, tp->peermac);
if (sta_ptr && sta_ptr->tx_pause != tp->tx_pause) {
sta_ptr->tx_pause = tp->tx_pause;
+ spin_unlock_bh(&priv->sta_list_spinlock);
mwifiex_update_ralist_tx_pause(priv, tp->peermac,
tp->tx_pause);
+ } else {
+ spin_unlock_bh(&priv->sta_list_spinlock);
}
- spin_unlock_bh(&priv->sta_list_spinlock);
}
}
@@ -399,11 +401,13 @@ static void mwifiex_process_sta_tx_pause(struct mwifiex_private *priv,
sta_ptr = mwifiex_get_sta_entry(priv, tp->peermac);
if (sta_ptr && sta_ptr->tx_pause != tp->tx_pause) {
sta_ptr->tx_pause = tp->tx_pause;
+ spin_unlock_bh(&priv->sta_list_spinlock);
mwifiex_update_ralist_tx_pause(priv,
tp->peermac,
tp->tx_pause);
+ } else {
+ spin_unlock_bh(&priv->sta_list_spinlock);
}
- spin_unlock_bh(&priv->sta_list_spinlock);
}
}
}
--
2.34.1
From: Joakim Tjernlund <[email protected]>
[ Upstream commit ebe82cf92cd4825c3029434cabfcd2f1780e64be ]
Current I2C reset procedure is broken in two ways:
1) It only generate 1 START instead of 9 STARTs and STOP.
2) It leaves the bus Busy so every I2C xfer after the first
fixup calls the reset routine again, for every xfer there after.
This fixes both errors.
Signed-off-by: Joakim Tjernlund <[email protected]>
Acked-by: Scott Wood <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/i2c/busses/i2c-mpc.c | 23 +++++++++++++++--------
1 file changed, 15 insertions(+), 8 deletions(-)
diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index af349661fd769..8de8296d25831 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -105,23 +105,30 @@ static irqreturn_t mpc_i2c_isr(int irq, void *dev_id)
/* Sometimes 9th clock pulse isn't generated, and slave doesn't release
* the bus, because it wants to send ACK.
* Following sequence of enabling/disabling and sending start/stop generates
- * the 9 pulses, so it's all OK.
+ * the 9 pulses, each with a START then ending with STOP, so it's all OK.
*/
static void mpc_i2c_fixup(struct mpc_i2c *i2c)
{
int k;
- u32 delay_val = 1000000 / i2c->real_clk + 1;
-
- if (delay_val < 2)
- delay_val = 2;
+ unsigned long flags;
for (k = 9; k; k--) {
writeccr(i2c, 0);
- writeccr(i2c, CCR_MSTA | CCR_MTX | CCR_MEN);
+ writeb(0, i2c->base + MPC_I2C_SR); /* clear any status bits */
+ writeccr(i2c, CCR_MEN | CCR_MSTA); /* START */
+ readb(i2c->base + MPC_I2C_DR); /* init xfer */
+ udelay(15); /* let it hit the bus */
+ local_irq_save(flags); /* should not be delayed further */
+ writeccr(i2c, CCR_MEN | CCR_MSTA | CCR_RSTA); /* delay SDA */
readb(i2c->base + MPC_I2C_DR);
- writeccr(i2c, CCR_MEN);
- udelay(delay_val << 1);
+ if (k != 1)
+ udelay(5);
+ local_irq_restore(flags);
}
+ writeccr(i2c, CCR_MEN); /* Initiate STOP */
+ readb(i2c->base + MPC_I2C_DR);
+ udelay(15); /* Let STOP propagate */
+ writeccr(i2c, 0);
}
static int i2c_wait(struct mpc_i2c *i2c, unsigned timeout, int writing)
--
2.34.1
From: Paolo Abeni <[email protected]>
[ Upstream commit 2cbad989033bff0256675c38f96f5faab852af4b ]
The WARN_ONCE() in bpf_warn_invalid_xdp_action() can be triggered by
any bugged program, and even attaching a correct program to a NIC
not supporting the given action.
The resulting splat, beyond polluting the logs, fouls automated tools:
e.g. a syzkaller reproducers using an XDP program returning an
unsupported action will never pass validation.
Replace the WARN_ONCE with a less intrusive pr_warn_once().
Signed-off-by: Paolo Abeni <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Toke Høiland-Jørgensen <[email protected]>
Link: https://lore.kernel.org/bpf/016ceec56e4817ebb2a9e35ce794d5c917df572c.1638189075.git.pabeni@redhat.com
Signed-off-by: Sasha Levin <[email protected]>
---
net/core/filter.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/net/core/filter.c b/net/core/filter.c
index 706c31ae65b01..7fa4283f2a8c0 100644
--- a/net/core/filter.c
+++ b/net/core/filter.c
@@ -7921,9 +7921,9 @@ void bpf_warn_invalid_xdp_action(u32 act)
{
const u32 act_max = XDP_REDIRECT;
- WARN_ONCE(1, "%s XDP return value %u, expect packet loss!\n",
- act > act_max ? "Illegal" : "Driver unsupported",
- act);
+ pr_warn_once("%s XDP return value %u, expect packet loss!\n",
+ act > act_max ? "Illegal" : "Driver unsupported",
+ act);
}
EXPORT_SYMBOL_GPL(bpf_warn_invalid_xdp_action);
--
2.34.1
From: Luiz Augusto von Dentz <[email protected]>
[ Upstream commit cfb4c313be670fd4bd09650216620fa4514cdb93 ]
This set HCI_QUIRK_VALID_LE_STATES quirk which is required for the likes
of experimental LE simultaneous roles.
Signed-off-by: Luiz Augusto von Dentz <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/bluetooth/hci_vhci.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/bluetooth/hci_vhci.c b/drivers/bluetooth/hci_vhci.c
index 8ab26dec5f6e8..8469f9876dd26 100644
--- a/drivers/bluetooth/hci_vhci.c
+++ b/drivers/bluetooth/hci_vhci.c
@@ -121,6 +121,8 @@ static int __vhci_create_device(struct vhci_data *data, __u8 opcode)
if (opcode & 0x80)
set_bit(HCI_QUIRK_RAW_DEVICE, &hdev->quirks);
+ set_bit(HCI_QUIRK_VALID_LE_STATES, &hdev->quirks);
+
if (hci_register_dev(hdev) < 0) {
BT_ERR("Can't register HCI device");
hci_free_dev(hdev);
--
2.34.1
From: James Hilliard <[email protected]>
[ Upstream commit c8ed7d2f614cd8b315981d116c7a2fb01829500d ]
Some uvc devices appear to require the maximum allowed USB timeout
for GET_CUR/SET_CUR requests.
So lets just bump the UVC control timeout to 5 seconds which is the
same as the usb ctrl get/set defaults:
USB_CTRL_GET_TIMEOUT 5000
USB_CTRL_SET_TIMEOUT 5000
It fixes the following runtime warnings:
Failed to query (GET_CUR) UVC control 11 on unit 2: -110 (exp. 1).
Failed to query (SET_CUR) UVC control 3 on unit 2: -110 (exp. 2).
Signed-off-by: James Hilliard <[email protected]>
Signed-off-by: Laurent Pinchart <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/usb/uvc/uvcvideo.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/media/usb/uvc/uvcvideo.h b/drivers/media/usb/uvc/uvcvideo.h
index a3dfacf069c44..c884020b28784 100644
--- a/drivers/media/usb/uvc/uvcvideo.h
+++ b/drivers/media/usb/uvc/uvcvideo.h
@@ -183,7 +183,7 @@
/* Maximum status buffer size in bytes of interrupt URB. */
#define UVC_MAX_STATUS_SIZE 16
-#define UVC_CTRL_CONTROL_TIMEOUT 500
+#define UVC_CTRL_CONTROL_TIMEOUT 5000
#define UVC_CTRL_STREAMING_TIMEOUT 5000
/* Maximum allowed number of control mappings per device */
--
2.34.1
From: Hans de Goede <[email protected]>
[ Upstream commit 57d2dbf710d832841872fb15ebb79429cab90fae ]
The GPD win and its sibling the GPD pocket (99% the same electronics in a
different case) use a PCI wifi card. But the ACPI tables on both variants
contain a bug where the SDIO MMC controller for SDIO wifi cards is enabled
despite this. This SDIO MMC controller has a PCI0.SDHB.BRC1 child-device
which _PS3 method sets a GPIO causing the PCI wifi card to turn off.
At the moment there is a pretty ugly kludge in the sdhci-acpi.c code,
just to work around the bug in the DSDT of this single design. This can
be solved cleaner/simply with a quirk overriding the _STA return of the
broken PCI0.SDHB.BRC1 PCI0.SDHB.BRC1 child with a status value of 0,
so that its power_manageable flag gets cleared, avoiding this problem.
Note that even though it is not used, the _STA method for the MMC
controller is deliberately not overridden. If the status of the MMC
controller were forced to 0 it would never get suspended, which would
cause these mini-laptops to not reach S0i3 level when suspended.
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/acpi/x86/utils.c | 20 +++++++++++++++++---
1 file changed, 17 insertions(+), 3 deletions(-)
diff --git a/drivers/acpi/x86/utils.c b/drivers/acpi/x86/utils.c
index 91bbc4b6b8035..3f9a162be84e3 100644
--- a/drivers/acpi/x86/utils.c
+++ b/drivers/acpi/x86/utils.c
@@ -94,9 +94,10 @@ static const struct override_status_id override_status_ids[] = {
/*
* The GPD win BIOS dated 20170221 has disabled the accelerometer, the
* drivers sometimes cause crashes under Windows and this is how the
- * manufacturer has solved this :| Note that the the DMI data is less
- * generic then it seems, a board_vendor of "AMI Corporation" is quite
- * rare and a board_name of "Default String" also is rare.
+ * manufacturer has solved this :| The DMI match may not seem unique,
+ * but it is. In the 67000+ DMI decode dumps from linux-hardware.org
+ * only 116 have board_vendor set to "AMI Corporation" and of those 116
+ * only the GPD win and pocket entries' board_name is "Default string".
*
* Unfortunately the GPD pocket also uses these strings and its BIOS
* was copy-pasted from the GPD win, so it has a disabled KIOX000A
@@ -120,6 +121,19 @@ static const struct override_status_id override_status_ids[] = {
DMI_MATCH(DMI_PRODUCT_NAME, "Default string"),
DMI_MATCH(DMI_BIOS_DATE, "05/25/2017")
}),
+
+ /*
+ * The GPD win/pocket have a PCI wifi card, but its DSDT has the SDIO
+ * mmc controller enabled and that has a child-device which _PS3
+ * method sets a GPIO causing the PCI wifi card to turn off.
+ * See above remark about uniqueness of the DMI match.
+ */
+ NOT_PRESENT_ENTRY_PATH("\\_SB_.PCI0.SDHB.BRC1", ATOM_AIRMONT, {
+ DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"),
+ DMI_EXACT_MATCH(DMI_BOARD_NAME, "Default string"),
+ DMI_EXACT_MATCH(DMI_BOARD_SERIAL, "Default string"),
+ DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Default string"),
+ }),
};
bool acpi_device_override_status(struct acpi_device *adev, unsigned long long *status)
--
2.34.1
From: Zhou Qingyang <[email protected]>
[ Upstream commit 348df8035301dd212e3cc2860efe4c86cb0d3303 ]
In hexium_attach(dev, info), saa7146_vv_init() is called to allocate
a new memory for dev->vv_data. In hexium_detach(), saa7146_vv_release()
will be called and there is a dereference of dev->vv_data in
saa7146_vv_release(), which could lead to a NULL pointer dereference
on failure of saa7146_vv_init() according to the following logic.
Both hexium_attach() and hexium_detach() are callback functions of
the variable 'extension', so there exists a possible call chain directly
from hexium_attach() to hexium_detach():
hexium_attach(dev, info) -- fail to alloc memory to dev->vv_data
| in saa7146_vv_init().
|
|
hexium_detach() -- a dereference of dev->vv_data in saa7146_vv_release()
Fix this bug by adding a check of saa7146_vv_init().
This bug was found by a static analyzer. The analysis employs
differential checking to identify inconsistent security operations
(e.g., checks or kfrees) between two code paths and confirms that the
inconsistent operations are not recovered in the current function or
the callers, so they constitute bugs.
Note that, as a bug found by static analysis, it can be a false
positive or hard to trigger. Multiple researchers have cross-reviewed
the bug.
Builds with CONFIG_VIDEO_HEXIUM_ORION=m show no new warnings,
and our static analyzer no longer warns about this code.
Signed-off-by: Zhou Qingyang <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/pci/saa7146/hexium_orion.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/media/pci/saa7146/hexium_orion.c b/drivers/media/pci/saa7146/hexium_orion.c
index 39d14c179d229..2eb4bee16b71f 100644
--- a/drivers/media/pci/saa7146/hexium_orion.c
+++ b/drivers/media/pci/saa7146/hexium_orion.c
@@ -355,10 +355,16 @@ static struct saa7146_ext_vv vv_data;
static int hexium_attach(struct saa7146_dev *dev, struct saa7146_pci_extension_data *info)
{
struct hexium *hexium = (struct hexium *) dev->ext_priv;
+ int ret;
DEB_EE("\n");
- saa7146_vv_init(dev, &vv_data);
+ ret = saa7146_vv_init(dev, &vv_data);
+ if (ret) {
+ pr_err("Error in saa7146_vv_init()\n");
+ return ret;
+ }
+
vv_data.vid_ops.vidioc_enum_input = vidioc_enum_input;
vv_data.vid_ops.vidioc_g_input = vidioc_g_input;
vv_data.vid_ops.vidioc_s_input = vidioc_s_input;
--
2.34.1
From: Rafael J. Wysocki <[email protected]>
[ Upstream commit 1cdfe9e346b4c5509ffe19ccde880fd259d9f7a3 ]
ACPICA commit c11af67d8f7e3d381068ce7771322f2b5324d687
If original_count is 0 in acpi_ut_update_ref_count (),
acpi_ut_delete_internal_obj () is invoked for the target object, which is
incorrect, because that object has been deleted once already and the
memory allocated to store it may have been reclaimed and allocated
for a different purpose by the host OS. Moreover, a confusing debug
message following the "Reference Count is already zero, cannot
decrement" warning is printed in that case.
To fix this issue, make acpi_ut_update_ref_count () return after finding
that original_count is 0 and printing the above warning.
Link: https://github.com/acpica/acpica/commit/c11af67d
Link: https://github.com/acpica/acpica/pull/652
Reported-by: Mark Asselstine <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Bob Moore <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/acpi/acpica/utdelete.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/acpi/acpica/utdelete.c b/drivers/acpi/acpica/utdelete.c
index 72d2c0b656339..cb1750e7a6281 100644
--- a/drivers/acpi/acpica/utdelete.c
+++ b/drivers/acpi/acpica/utdelete.c
@@ -422,6 +422,7 @@ acpi_ut_update_ref_count(union acpi_operand_object *object, u32 action)
ACPI_WARNING((AE_INFO,
"Obj %p, Reference Count is already zero, cannot decrement\n",
object));
+ return;
}
ACPI_DEBUG_PRINT_RAW((ACPI_DB_ALLOCATIONS,
--
2.34.1
From: Zheyu Ma <[email protected]>
[ Upstream commit b13203032e679674c7c518f52a7ec0801ca3a829 ]
A out-of-bounds bug can be triggered by an interrupt, the reason for
this bug is the lack of checking of register values.
In flexcop_pci_isr, the driver reads value from a register and uses it as
a dma address. Finally, this address will be passed to the count parameter
of find_next_packet. If this value is larger than the size of dma, the
index of buffer will be out-of-bounds.
Fix this by adding a check after reading the value of the register.
The following KASAN report reveals it:
BUG: KASAN: slab-out-of-bounds in find_next_packet
drivers/media/dvb-core/dvb_demux.c:528 [inline]
BUG: KASAN: slab-out-of-bounds in _dvb_dmx_swfilter
drivers/media/dvb-core/dvb_demux.c:572 [inline]
BUG: KASAN: slab-out-of-bounds in dvb_dmx_swfilter+0x3fa/0x420
drivers/media/dvb-core/dvb_demux.c:603
Read of size 1 at addr ffff8880608c00a0 by task swapper/2/0
CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.19.177-gdba4159c14ef #25
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0xec/0x156 lib/dump_stack.c:118
print_address_description+0x78/0x290 mm/kasan/report.c:256
kasan_report_error mm/kasan/report.c:354 [inline]
kasan_report+0x25b/0x380 mm/kasan/report.c:412
__asan_report_load1_noabort+0x19/0x20 mm/kasan/report.c:430
find_next_packet drivers/media/dvb-core/dvb_demux.c:528 [inline]
_dvb_dmx_swfilter drivers/media/dvb-core/dvb_demux.c:572 [inline]
dvb_dmx_swfilter+0x3fa/0x420 drivers/media/dvb-core/dvb_demux.c:603
flexcop_pass_dmx_data+0x2e/0x40 drivers/media/common/b2c2/flexcop.c:167
flexcop_pci_isr+0x3d1/0x5d0 drivers/media/pci/b2c2/flexcop-pci.c:212
__handle_irq_event_percpu+0xfb/0x770 kernel/irq/handle.c:149
handle_irq_event_percpu+0x79/0x150 kernel/irq/handle.c:189
handle_irq_event+0xac/0x140 kernel/irq/handle.c:206
handle_fasteoi_irq+0x232/0x5c0 kernel/irq/chip.c:725
generic_handle_irq_desc include/linux/irqdesc.h:155 [inline]
handle_irq+0x230/0x3a0 arch/x86/kernel/irq_64.c:87
do_IRQ+0xa7/0x1e0 arch/x86/kernel/irq.c:247
common_interrupt+0xf/0xf arch/x86/entry/entry_64.S:670
</IRQ>
RIP: 0010:native_safe_halt+0x28/0x30 arch/x86/include/asm/irqflags.h:61
Code: 00 00 55 be 04 00 00 00 48 c7 c7 00 62 2f 8c 48 89 e5 e8 fb 31
e8 f8 8b 05 75 4f 8e 03 85 c0 7e 07 0f 00 2d 8a 61 66 00 fb f4 <5d> c3
90 90 90 90 90 90 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 41
RSP: 0018:ffff88806b71fcc8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffde
RAX: 0000000000000000 RBX: ffffffff8bde44c8 RCX: ffffffff88a11285
RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff8c2f6200
RBP: ffff88806b71fcc8 R08: fffffbfff185ec40 R09: fffffbfff185ec40
R10: 0000000000000001 R11: fffffbfff185ec40 R12: 0000000000000002
R13: ffffffff8be9d6e0 R14: 0000000000000000 R15: 0000000000000000
arch_safe_halt arch/x86/include/asm/paravirt.h:94 [inline]
default_idle+0x6f/0x360 arch/x86/kernel/process.c:557
arch_cpu_idle+0xf/0x20 arch/x86/kernel/process.c:548
default_idle_call+0x3b/0x60 kernel/sched/idle.c:93
cpuidle_idle_call kernel/sched/idle.c:153 [inline]
do_idle+0x2ab/0x3c0 kernel/sched/idle.c:263
cpu_startup_entry+0xcb/0xe0 kernel/sched/idle.c:369
start_secondary+0x3b8/0x4e0 arch/x86/kernel/smpboot.c:271
secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:243
Allocated by task 1:
save_stack+0x43/0xd0 mm/kasan/kasan.c:448
set_track mm/kasan/kasan.c:460 [inline]
kasan_kmalloc+0xad/0xe0 mm/kasan/kasan.c:553
kasan_slab_alloc+0x11/0x20 mm/kasan/kasan.c:490
slab_post_alloc_hook mm/slab.h:445 [inline]
slab_alloc_node mm/slub.c:2741 [inline]
slab_alloc mm/slub.c:2749 [inline]
kmem_cache_alloc+0xeb/0x280 mm/slub.c:2754
kmem_cache_zalloc include/linux/slab.h:699 [inline]
__kernfs_new_node+0xe2/0x6f0 fs/kernfs/dir.c:633
kernfs_new_node+0x9a/0x120 fs/kernfs/dir.c:693
__kernfs_create_file+0x5f/0x340 fs/kernfs/file.c:992
sysfs_add_file_mode_ns+0x22a/0x4e0 fs/sysfs/file.c:306
create_files fs/sysfs/group.c:63 [inline]
internal_create_group+0x34e/0xc30 fs/sysfs/group.c:147
sysfs_create_group fs/sysfs/group.c:173 [inline]
sysfs_create_groups+0x9c/0x140 fs/sysfs/group.c:200
driver_add_groups+0x3e/0x50 drivers/base/driver.c:129
bus_add_driver+0x3a5/0x790 drivers/base/bus.c:684
driver_register+0x1cd/0x410 drivers/base/driver.c:170
__pci_register_driver+0x197/0x200 drivers/pci/pci-driver.c:1411
cx88_audio_pci_driver_init+0x23/0x25 drivers/media/pci/cx88/cx88-alsa.c:
1017
do_one_initcall+0xe0/0x610 init/main.c:884
do_initcall_level init/main.c:952 [inline]
do_initcalls init/main.c:960 [inline]
do_basic_setup init/main.c:978 [inline]
kernel_init_freeable+0x4d0/0x592 init/main.c:1145
kernel_init+0x18/0x190 init/main.c:1062
ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:415
Freed by task 0:
(stack is not available)
The buggy address belongs to the object at ffff8880608c0000
which belongs to the cache kernfs_node_cache of size 160
The buggy address is located 0 bytes to the right of
160-byte region [ffff8880608c0000, ffff8880608c00a0)
The buggy address belongs to the page:
page:ffffea0001823000 count:1 mapcount:0 mapping:ffff88806bed1e00
index:0x0 compound_mapcount: 0
flags: 0x100000000008100(slab|head)
raw: 0100000000008100 dead000000000100 dead000000000200 ffff88806bed1e00
raw: 0000000000000000 0000000000240024 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8880608bff80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff8880608c0000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff8880608c0080: 00 00 00 00 fc fc fc fc fc fc fc fc 00 00 00 00
^
ffff8880608c0100: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff8880608c0180: fc fc fc fc fc fc fc fc 00 00 00 00 00 00 00 00
==================================================================
Link: https://lore.kernel.org/linux-media/[email protected]
Reported-by: Zheyu Ma <[email protected]>
Signed-off-by: Zheyu Ma <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/pci/b2c2/flexcop-pci.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/media/pci/b2c2/flexcop-pci.c b/drivers/media/pci/b2c2/flexcop-pci.c
index a9d9520a94c6d..c9e6c7d663768 100644
--- a/drivers/media/pci/b2c2/flexcop-pci.c
+++ b/drivers/media/pci/b2c2/flexcop-pci.c
@@ -185,6 +185,8 @@ static irqreturn_t flexcop_pci_isr(int irq, void *dev_id)
dma_addr_t cur_addr =
fc->read_ibi_reg(fc,dma1_008).dma_0x8.dma_cur_addr << 2;
u32 cur_pos = cur_addr - fc_pci->dma[0].dma_addr0;
+ if (cur_pos > fc_pci->dma[0].size * 2)
+ goto error;
deb_irq("%u irq: %08x cur_addr: %llx: cur_pos: %08x, last_cur_pos: %08x ",
jiffies_to_usecs(jiffies - fc_pci->last_irq),
@@ -225,6 +227,7 @@ static irqreturn_t flexcop_pci_isr(int irq, void *dev_id)
ret = IRQ_NONE;
}
+error:
spin_unlock_irqrestore(&fc_pci->irq_lock, flags);
return ret;
}
--
2.34.1
From: Dinh Nguyen <[email protected]>
[ Upstream commit bd1d6da17c296bd005bfa656952710d256e77dd3 ]
Version 2.40a supports DDR_ECC_INTR_SUPPORT for a quirk, so use that
quirk to determine a call to setup_address_map().
Signed-off-by: Dinh Nguyen <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Reviewed-by: Michal Simek <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/edac/synopsys_edac.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/edac/synopsys_edac.c b/drivers/edac/synopsys_edac.c
index 1a801a5d3b08b..92906b56b1a2b 100644
--- a/drivers/edac/synopsys_edac.c
+++ b/drivers/edac/synopsys_edac.c
@@ -1351,8 +1351,7 @@ static int mc_probe(struct platform_device *pdev)
}
}
- if (of_device_is_compatible(pdev->dev.of_node,
- "xlnx,zynqmp-ddrc-2.40a"))
+ if (priv->p_data->quirks & DDR_ECC_INTR_SUPPORT)
setup_address_map(priv);
#endif
--
2.34.1
From: Hans de Goede <[email protected]>
[ Upstream commit d431dfb764b145369be820fcdfd50f2159b9bbc2 ]
It turns out that there is a WMI object which controls the PWM2 device
used for the keyboard backlight and that WMI object also provides some
other useful functionality.
The upcoming lenovo-yogabook-wmi driver will offer both backlight
control and the other functionality, so there no longer is a need
to have the lpss-pwm driver binding to PWM2 for backlight control;
and this is now actually undesirable because this will cause both
the WMI code and the lpss-pwm driver to poke at the same PWM
controller.
Drop the always-present quirk for the PWM2 ACPI-device, so that the
lpss-pwm controller will no longer bind to it.
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/acpi/x86/utils.c | 4 ----
1 file changed, 4 deletions(-)
diff --git a/drivers/acpi/x86/utils.c b/drivers/acpi/x86/utils.c
index bdc1ba00aee9f..baaa44edc9441 100644
--- a/drivers/acpi/x86/utils.c
+++ b/drivers/acpi/x86/utils.c
@@ -54,10 +54,6 @@ static const struct always_present_id always_present_ids[] = {
ENTRY("80860F09", "1", X86_MATCH(ATOM_SILVERMONT), {}),
ENTRY("80862288", "1", X86_MATCH(ATOM_AIRMONT), {}),
- /* Lenovo Yoga Book uses PWM2 for keyboard backlight control */
- ENTRY("80862289", "2", X86_MATCH(ATOM_AIRMONT), {
- DMI_MATCH(DMI_PRODUCT_NAME, "Lenovo YB1-X9"),
- }),
/*
* The INT0002 device is necessary to clear wakeup interrupt sources
* on Cherry Trail devices, without it we get nobody cared IRQ msgs.
--
2.34.1
From: Rafael J. Wysocki <[email protected]>
[ Upstream commit 521223d8b3ec078f670c7c35a1a04b1b2af07966 ]
The min and max frequency QoS requests in the cpufreq core are
initialized to whatever the current min and max frequency values are
at the init time, but if any of these values change later (for
example, cpuinfo.max_freq is updated by the driver), these initial
request values will be limiting the CPU frequency unnecessarily
unless they are changed by user space via sysfs.
To address this, initialize min_freq_req and max_freq_req to
FREQ_QOS_MIN_DEFAULT_VALUE and FREQ_QOS_MAX_DEFAULT_VALUE,
respectively, so they don't really limit anything until user
space updates them.
Reported-by: Srinivas Pandruvada <[email protected]>
Tested-by: Srinivas Pandruvada <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/cpufreq/cpufreq.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index 8e159fb6af9cd..30dafe8fc5054 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -1400,7 +1400,7 @@ static int cpufreq_online(unsigned int cpu)
ret = freq_qos_add_request(&policy->constraints,
policy->min_freq_req, FREQ_QOS_MIN,
- policy->min);
+ FREQ_QOS_MIN_DEFAULT_VALUE);
if (ret < 0) {
/*
* So we don't call freq_qos_remove_request() for an
@@ -1420,7 +1420,7 @@ static int cpufreq_online(unsigned int cpu)
ret = freq_qos_add_request(&policy->constraints,
policy->max_freq_req, FREQ_QOS_MAX,
- policy->max);
+ FREQ_QOS_MAX_DEFAULT_VALUE);
if (ret < 0) {
policy->max_freq_req = NULL;
goto out_destroy_policy;
--
2.34.1
From: Hans de Goede <[email protected]>
[ Upstream commit bc30c3b0c8a1904d83d5f0d60fb8650a334b207b ]
The Lenovo Yoga Book X91F/L uses a panel which has been mounted
90 degrees rotated. Add a quirk for this.
Cc: Yauhen Kharuzhy <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Acked-by: Simon Ser <[email protected]>
Tested-by: Yauhen Kharuzhy <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/drm_panel_orientation_quirks.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/gpu/drm/drm_panel_orientation_quirks.c b/drivers/gpu/drm/drm_panel_orientation_quirks.c
index a950d5db211c5..9d1bd8f491ad7 100644
--- a/drivers/gpu/drm/drm_panel_orientation_quirks.c
+++ b/drivers/gpu/drm/drm_panel_orientation_quirks.c
@@ -248,6 +248,12 @@ static const struct dmi_system_id orientation_data[] = {
DMI_EXACT_MATCH(DMI_PRODUCT_VERSION, "Lenovo ideapad D330-10IGM"),
},
.driver_data = (void *)&lcd1200x1920_rightside_up,
+ }, { /* Lenovo Yoga Book X90F / X91F / X91L */
+ .matches = {
+ /* Non exact match to match all versions */
+ DMI_MATCH(DMI_PRODUCT_NAME, "Lenovo YB1-X9"),
+ },
+ .driver_data = (void *)&lcd1200x1920_rightside_up,
}, { /* OneGX1 Pro */
.matches = {
DMI_EXACT_MATCH(DMI_SYS_VENDOR, "SYSTEM_MANUFACTURER"),
--
2.34.1
From: Lukas Wunner <[email protected]>
[ Upstream commit 08a0c6dff91c965e39905cf200d22db989203ccb ]
pl010_set_termios() briefly resets the CR register to zero.
Where does this register write come from?
The PL010 driver's IRQ handler ambauart_int() originally modified the CR
register without holding the port spinlock. ambauart_set_termios() also
modified that register. To prevent concurrent read-modify-writes by the
IRQ handler and to prevent transmission while changing baudrate,
ambauart_set_termios() had to disable interrupts. That is achieved by
writing zero to the CR register.
However in 2004 the PL010 driver was amended to acquire the port
spinlock in the IRQ handler, obviating the need to disable interrupts in
->set_termios():
https://git.kernel.org/history/history/c/157c0342e591
That rendered the CR register write obsolete. Drop it.
Cc: Russell King <[email protected]>
Signed-off-by: Lukas Wunner <[email protected]>
Link: https://lore.kernel.org/r/fcaff16e5b1abb4cc3da5a2879ac13f278b99ed0.1641128728.git.lukas@wunner.de
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/tty/serial/amba-pl010.c | 3 ---
1 file changed, 3 deletions(-)
diff --git a/drivers/tty/serial/amba-pl010.c b/drivers/tty/serial/amba-pl010.c
index 3284f34e9dfe1..75d61e038a775 100644
--- a/drivers/tty/serial/amba-pl010.c
+++ b/drivers/tty/serial/amba-pl010.c
@@ -448,14 +448,11 @@ pl010_set_termios(struct uart_port *port, struct ktermios *termios,
if ((termios->c_cflag & CREAD) == 0)
uap->port.ignore_status_mask |= UART_DUMMY_RSR_RX;
- /* first, disable everything */
old_cr = readb(uap->port.membase + UART010_CR) & ~UART010_CR_MSIE;
if (UART_ENABLE_MS(port, termios->c_cflag))
old_cr |= UART010_CR_MSIE;
- writel(0, uap->port.membase + UART010_CR);
-
/* Set baud rate */
quot -= 1;
writel((quot & 0xf00) >> 8, uap->port.membase + UART010_LCRM);
--
2.34.1
From: Johannes Berg <[email protected]>
[ Upstream commit ab07506b0454bea606095951e19e72c282bfbb42 ]
If firmware load fails after having loaded some parts of the
firmware, e.g. the IML image, then this would leak. For the
host command list we'd end up running into a WARN on the next
attempt to load another firmware image.
Fix this by calling iwl_dealloc_ucode() on failures, and make
that also clear the data so we start fresh on the next round.
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20211210110539.1f742f0eb58a.I1315f22f6aa632d94ae2069f85e1bca5e734dce0@changeid
Signed-off-by: Luca Coelho <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/intel/iwlwifi/iwl-drv.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-drv.c b/drivers/net/wireless/intel/iwlwifi/iwl-drv.c
index be214f39f52be..4bdfd6afa7324 100644
--- a/drivers/net/wireless/intel/iwlwifi/iwl-drv.c
+++ b/drivers/net/wireless/intel/iwlwifi/iwl-drv.c
@@ -185,6 +185,9 @@ static void iwl_dealloc_ucode(struct iwl_drv *drv)
for (i = 0; i < IWL_UCODE_TYPE_MAX; i++)
iwl_free_fw_img(drv, drv->fw.img + i);
+
+ /* clear the data for the aborted load case */
+ memset(&drv->fw, 0, sizeof(drv->fw));
}
static int iwl_alloc_fw_desc(struct iwl_drv *drv, struct fw_desc *desc,
@@ -1365,6 +1368,7 @@ static void iwl_req_fw_callback(const struct firmware *ucode_raw, void *context)
int i;
bool load_module = false;
bool usniffer_images = false;
+ bool failure = true;
fw->ucode_capa.max_probe_length = IWL_DEFAULT_MAX_PROBE_LENGTH;
fw->ucode_capa.standard_phy_calibration_size =
@@ -1634,6 +1638,7 @@ static void iwl_req_fw_callback(const struct firmware *ucode_raw, void *context)
op->name, err);
#endif
}
+ failure = false;
goto free;
try_again:
@@ -1649,6 +1654,9 @@ static void iwl_req_fw_callback(const struct firmware *ucode_raw, void *context)
complete(&drv->request_firmware_complete);
device_release_driver(drv->trans->dev);
free:
+ if (failure)
+ iwl_dealloc_ucode(drv);
+
if (pieces) {
for (i = 0; i < ARRAY_SIZE(pieces->img); i++)
kfree(pieces->img[i].sec);
--
2.34.1
From: Nicholas Piggin <[email protected]>
[ Upstream commit 5dad4ba68a2483fc80d70b9dc90bbe16e1f27263 ]
It is possible for all CPUs to miss the pending cpumask becoming clear,
and then nobody resetting it, which will cause the lockup detector to
stop working. It will eventually expire, but watchdog_smp_panic will
avoid doing anything if the pending mask is clear and it will never be
reset.
Order the cpumask clear vs the subsequent test to close this race.
Add an extra check for an empty pending mask when the watchdog fires and
finds its bit still clear, to try to catch any other possible races or
bugs here and keep the watchdog working. The extra test in
arch_touch_nmi_watchdog is required to prevent the new warning from
firing off.
Signed-off-by: Nicholas Piggin <[email protected]>
Reviewed-by: Laurent Dufour <[email protected]>
Debugged-by: Laurent Dufour <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/kernel/watchdog.c | 41 +++++++++++++++++++++++++++++++++-
1 file changed, 40 insertions(+), 1 deletion(-)
diff --git a/arch/powerpc/kernel/watchdog.c b/arch/powerpc/kernel/watchdog.c
index af3c15a1d41eb..75b2a6c4db5a5 100644
--- a/arch/powerpc/kernel/watchdog.c
+++ b/arch/powerpc/kernel/watchdog.c
@@ -132,6 +132,10 @@ static void set_cpumask_stuck(const struct cpumask *cpumask, u64 tb)
{
cpumask_or(&wd_smp_cpus_stuck, &wd_smp_cpus_stuck, cpumask);
cpumask_andnot(&wd_smp_cpus_pending, &wd_smp_cpus_pending, cpumask);
+ /*
+ * See wd_smp_clear_cpu_pending()
+ */
+ smp_mb();
if (cpumask_empty(&wd_smp_cpus_pending)) {
wd_smp_last_reset_tb = tb;
cpumask_andnot(&wd_smp_cpus_pending,
@@ -217,13 +221,44 @@ static void wd_smp_clear_cpu_pending(int cpu, u64 tb)
cpumask_clear_cpu(cpu, &wd_smp_cpus_stuck);
wd_smp_unlock(&flags);
+ } else {
+ /*
+ * The last CPU to clear pending should have reset the
+ * watchdog so we generally should not find it empty
+ * here if our CPU was clear. However it could happen
+ * due to a rare race with another CPU taking the
+ * last CPU out of the mask concurrently.
+ *
+ * We can't add a warning for it. But just in case
+ * there is a problem with the watchdog that is causing
+ * the mask to not be reset, try to kick it along here.
+ */
+ if (unlikely(cpumask_empty(&wd_smp_cpus_pending)))
+ goto none_pending;
}
return;
}
+
cpumask_clear_cpu(cpu, &wd_smp_cpus_pending);
+
+ /*
+ * Order the store to clear pending with the load(s) to check all
+ * words in the pending mask to check they are all empty. This orders
+ * with the same barrier on another CPU. This prevents two CPUs
+ * clearing the last 2 pending bits, but neither seeing the other's
+ * store when checking if the mask is empty, and missing an empty
+ * mask, which ends with a false positive.
+ */
+ smp_mb();
if (cpumask_empty(&wd_smp_cpus_pending)) {
unsigned long flags;
+none_pending:
+ /*
+ * Double check under lock because more than one CPU could see
+ * a clear mask with the lockless check after clearing their
+ * pending bits.
+ */
wd_smp_lock(&flags);
if (cpumask_empty(&wd_smp_cpus_pending)) {
wd_smp_last_reset_tb = tb;
@@ -314,8 +349,12 @@ void arch_touch_nmi_watchdog(void)
{
unsigned long ticks = tb_ticks_per_usec * wd_timer_period_ms * 1000;
int cpu = smp_processor_id();
- u64 tb = get_tb();
+ u64 tb;
+ if (!cpumask_test_cpu(cpu, &watchdog_cpumask))
+ return;
+
+ tb = get_tb();
if (tb - per_cpu(wd_timer_tb, cpu) >= ticks) {
per_cpu(wd_timer_tb, cpu) = tb;
wd_smp_clear_cpu_pending(cpu, tb);
--
2.34.1
From: Kishon Vijay Abraham I <[email protected]>
[ Upstream commit 4d3984906397581dc0ccb6a02bf16b6ff82c9192 ]
Fix 'dtbs_check' in serdes_ln_ctrl (serdes-ln-ctrl@4080) node by
changing the node name to mux-controller@4080.
Signed-off-by: Kishon Vijay Abraham I <[email protected]>
Reviewed-by: Aswath Govindraju <[email protected]>
Signed-off-by: Vignesh Raghavendra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
index 5832ad830ed14..1ab9f9604af6c 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
@@ -25,7 +25,7 @@
#size-cells = <1>;
ranges = <0x00 0x00 0x00100000 0x1c000>;
- serdes_ln_ctrl: serdes-ln-ctrl@4080 {
+ serdes_ln_ctrl: mux-controller@4080 {
compatible = "mmio-mux";
#mux-control-cells = <1>;
mux-reg-masks = <0x4080 0x3>, <0x4084 0x3>, /* SERDES0 lane0/1 select */
--
2.34.1
From: Julia Lawall <[email protected]>
[ Upstream commit a1d2b210ffa52d60acabbf7b6af3ef7e1e69cda0 ]
for_each_node_by_type performs an of_node_get on each iteration, so
a break out of the loop requires an of_node_put.
A simplified version of the semantic patch that fixes this problem is as
follows (http://coccinelle.lip6.fr):
// <smpl>
@@
local idexpression n;
expression e;
@@
for_each_node_by_type(n,...) {
...
(
of_node_put(n);
|
e = n
|
+ of_node_put(n);
? break;
)
...
}
... when != n
// </smpl>
Signed-off-by: Julia Lawall <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/kernel/btext.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/arch/powerpc/kernel/btext.c b/arch/powerpc/kernel/btext.c
index 803c2a45b22ac..1cffb5e7c38d6 100644
--- a/arch/powerpc/kernel/btext.c
+++ b/arch/powerpc/kernel/btext.c
@@ -241,8 +241,10 @@ int __init btext_find_display(int allow_nonstdout)
rc = btext_initialize(np);
printk("result: %d\n", rc);
}
- if (rc == 0)
+ if (rc == 0) {
+ of_node_put(np);
break;
+ }
}
return rc;
}
--
2.34.1
From: Randy Dunlap <[email protected]>
[ Upstream commit 6f03055d508ff4feb8db02ba3df9303a1db8d381 ]
The MIPS BMC63XX subarch does not provide/support clk_set_parent().
This causes build errors in a few drivers, so add a simple implementation
of that function so that callers of it will build without errors.
Fixes these build errors:
ERROR: modpost: "clk_set_parent" [sound/soc/jz4740/snd-soc-jz4740-i2s.ko] undefined!
ERROR: modpost: "clk_set_parent" [sound/soc/atmel/snd-soc-atmel-i2s.ko] undefined!
Fixes: e7300d04bd08 ("MIPS: BCM63xx: Add support for the Broadcom BCM63xx family of SOCs." )
Signed-off-by: Randy Dunlap <[email protected]>
Reviewed-by: Jonathan Cameron <[email protected]>
Acked-by: Florian Fainelli <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/mips/bcm63xx/clk.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/mips/bcm63xx/clk.c b/arch/mips/bcm63xx/clk.c
index aba6e2d6a736c..dcfa0ea912fe1 100644
--- a/arch/mips/bcm63xx/clk.c
+++ b/arch/mips/bcm63xx/clk.c
@@ -387,6 +387,12 @@ struct clk *clk_get_parent(struct clk *clk)
}
EXPORT_SYMBOL(clk_get_parent);
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+ return 0;
+}
+EXPORT_SYMBOL(clk_set_parent);
+
unsigned long clk_get_rate(struct clk *clk)
{
if (!clk)
--
2.34.1
From: Borislav Petkov <[email protected]>
[ Upstream commit db6c996d6ce45dfb44891f0824a65ecec216f47a ]
Fixes
vmlinux.o: warning: objtool: do_machine_check()+0x681: call to mce_read_aux() leaves .noinstr.text section
Signed-off-by: Borislav Petkov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/kernel/cpu/mce/core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/x86/kernel/cpu/mce/core.c b/arch/x86/kernel/cpu/mce/core.c
index 2a608f0819765..5cf1a024408bf 100644
--- a/arch/x86/kernel/cpu/mce/core.c
+++ b/arch/x86/kernel/cpu/mce/core.c
@@ -691,7 +691,7 @@ static struct notifier_block mce_default_nb = {
/*
* Read ADDR and MISC registers.
*/
-static void mce_read_aux(struct mce *m, int i)
+static noinstr void mce_read_aux(struct mce *m, int i)
{
if (m->status & MCI_STATUS_MISCV)
m->misc = mce_rdmsrl(msr_ops.misc(i));
--
2.34.1
From: Julia Lawall <[email protected]>
[ Upstream commit f6e82647ff71d427d4148964b71f239fba9d7937 ]
for_each_compatible_node performs an of_node_get on each iteration, so
a break out of the loop requires an of_node_put.
A simplified version of the semantic patch that fixes this problem is as
follows (http://coccinelle.lip6.fr):
// <smpl>
@@
expression e;
local idexpression n;
@@
@@
local idexpression n;
expression e;
@@
for_each_compatible_node(n,...) {
...
(
of_node_put(n);
|
e = n
|
+ of_node_put(n);
? break;
)
...
}
... when != n
// </smpl>
Signed-off-by: Julia Lawall <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/platforms/embedded6xx/hlwd-pic.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/powerpc/platforms/embedded6xx/hlwd-pic.c b/arch/powerpc/platforms/embedded6xx/hlwd-pic.c
index a1b7f79a8a152..de10c13de15c6 100644
--- a/arch/powerpc/platforms/embedded6xx/hlwd-pic.c
+++ b/arch/powerpc/platforms/embedded6xx/hlwd-pic.c
@@ -215,6 +215,7 @@ void hlwd_pic_probe(void)
irq_set_chained_handler(cascade_virq,
hlwd_pic_irq_cascade);
hlwd_irq_host = host;
+ of_node_put(np);
break;
}
}
--
2.34.1
From: Wen Gong <[email protected]>
[ Upstream commit ed05c7cf1286d7e31e7623bce55ff135723591bf ]
When enable debug config, it print below warning while shut down wlan
interface shuh as run "ifconfig wlan0 down".
The reason is because ar->regd_update_work is ran once, and it is will
call wiphy_lock(ar->hw->wiphy) in function ath11k_regd_update() which
is running in workqueue of ieee80211_local queued by ieee80211_queue_work().
Another thread from "ifconfig wlan0 down" will also accuqire the lock
by wiphy_lock(sdata->local->hw.wiphy) in function ieee80211_stop(), and
then it call ieee80211_stop_device() to flush_workqueue(local->workqueue),
this will wait the workqueue of ieee80211_local finished. Then deadlock
will happen easily if the two thread run meanwhile.
Below warning disappeared after this change.
[ 914.088798] ath11k_pci 0000:05:00.0: mac remove interface (vdev 0)
[ 914.088806] ath11k_pci 0000:05:00.0: mac stop 11d scan
[ 914.088810] ath11k_pci 0000:05:00.0: mac stop 11d vdev id 0
[ 914.088827] ath11k_pci 0000:05:00.0: htc ep 2 consumed 1 credits (total 0)
[ 914.088841] ath11k_pci 0000:05:00.0: send 11d scan stop vdev id 0
[ 914.088849] ath11k_pci 0000:05:00.0: htc insufficient credits ep 2 required 1 available 0
[ 914.088856] ath11k_pci 0000:05:00.0: htc insufficient credits ep 2 required 1 available 0
[ 914.096434] ath11k_pci 0000:05:00.0: rx ce pipe 2 len 16
[ 914.096442] ath11k_pci 0000:05:00.0: htc ep 2 got 1 credits (total 1)
[ 914.096481] ath11k_pci 0000:05:00.0: htc ep 2 consumed 1 credits (total 0)
[ 914.096491] ath11k_pci 0000:05:00.0: WMI vdev delete id 0
[ 914.111598] ath11k_pci 0000:05:00.0: rx ce pipe 2 len 16
[ 914.111628] ath11k_pci 0000:05:00.0: htc ep 2 got 1 credits (total 1)
[ 914.114659] ath11k_pci 0000:05:00.0: rx ce pipe 2 len 20
[ 914.114742] ath11k_pci 0000:05:00.0: htc rx completion ep 2 skb pK-error
[ 914.115977] ath11k_pci 0000:05:00.0: vdev delete resp for vdev id 0
[ 914.116685] ath11k_pci 0000:05:00.0: vdev 00:03:7f:29:61:11 deleted, vdev_id 0
[ 914.117583] ======================================================
[ 914.117592] WARNING: possible circular locking dependency detected
[ 914.117600] 5.16.0-rc1-wt-ath+ #1 Tainted: G OE
[ 914.117611] ------------------------------------------------------
[ 914.117618] ifconfig/2805 is trying to acquire lock:
[ 914.117628] ffff9c00a62bb548 ((wq_completion)phy0){+.+.}-{0:0}, at: flush_workqueue+0x87/0x470
[ 914.117674]
but task is already holding lock:
[ 914.117682] ffff9c00baea07d0 (&rdev->wiphy.mtx){+.+.}-{4:4}, at: ieee80211_stop+0x38/0x180 [mac80211]
[ 914.117872]
which lock already depends on the new lock.
[ 914.117880]
the existing dependency chain (in reverse order) is:
[ 914.117888]
-> #3 (&rdev->wiphy.mtx){+.+.}-{4:4}:
[ 914.117910] __mutex_lock+0xa0/0x9c0
[ 914.117930] mutex_lock_nested+0x1b/0x20
[ 914.117944] reg_process_self_managed_hints+0x3a/0xb0 [cfg80211]
[ 914.118093] wiphy_regulatory_register+0x47/0x80 [cfg80211]
[ 914.118229] wiphy_register+0x84f/0x9c0 [cfg80211]
[ 914.118353] ieee80211_register_hw+0x6b1/0xd90 [mac80211]
[ 914.118486] ath11k_mac_register+0x6af/0xb60 [ath11k]
[ 914.118550] ath11k_core_qmi_firmware_ready+0x383/0x4a0 [ath11k]
[ 914.118598] ath11k_qmi_driver_event_work+0x347/0x4a0 [ath11k]
[ 914.118656] process_one_work+0x228/0x670
[ 914.118669] worker_thread+0x4d/0x440
[ 914.118680] kthread+0x16d/0x1b0
[ 914.118697] ret_from_fork+0x22/0x30
[ 914.118714]
-> #2 (rtnl_mutex){+.+.}-{4:4}:
[ 914.118736] __mutex_lock+0xa0/0x9c0
[ 914.118751] mutex_lock_nested+0x1b/0x20
[ 914.118767] rtnl_lock+0x17/0x20
[ 914.118783] ath11k_regd_update+0x15a/0x260 [ath11k]
[ 914.118841] ath11k_regd_update_work+0x15/0x20 [ath11k]
[ 914.118897] process_one_work+0x228/0x670
[ 914.118909] worker_thread+0x4d/0x440
[ 914.118920] kthread+0x16d/0x1b0
[ 914.118934] ret_from_fork+0x22/0x30
[ 914.118948]
-> #1 ((work_completion)(&ar->regd_update_work)){+.+.}-{0:0}:
[ 914.118972] process_one_work+0x1fa/0x670
[ 914.118984] worker_thread+0x4d/0x440
[ 914.118996] kthread+0x16d/0x1b0
[ 914.119010] ret_from_fork+0x22/0x30
[ 914.119023]
-> #0 ((wq_completion)phy0){+.+.}-{0:0}:
[ 914.119045] __lock_acquire+0x146d/0x1cf0
[ 914.119057] lock_acquire+0x19b/0x360
[ 914.119067] flush_workqueue+0xae/0x470
[ 914.119084] ieee80211_stop_device+0x3b/0x50 [mac80211]
[ 914.119260] ieee80211_do_stop+0x5d7/0x830 [mac80211]
[ 914.119409] ieee80211_stop+0x45/0x180 [mac80211]
[ 914.119557] __dev_close_many+0xb3/0x120
[ 914.119573] __dev_change_flags+0xc3/0x1d0
[ 914.119590] dev_change_flags+0x29/0x70
[ 914.119605] devinet_ioctl+0x653/0x810
[ 914.119620] inet_ioctl+0x193/0x1e0
[ 914.119631] sock_do_ioctl+0x4d/0xf0
[ 914.119649] sock_ioctl+0x262/0x340
[ 914.119665] __x64_sys_ioctl+0x96/0xd0
[ 914.119678] do_syscall_64+0x3d/0xd0
[ 914.119694] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 914.119709]
other info that might help us debug this:
[ 914.119717] Chain exists of:
(wq_completion)phy0 --> rtnl_mutex --> &rdev->wiphy.mtx
[ 914.119745] Possible unsafe locking scenario:
[ 914.119752] CPU0 CPU1
[ 914.119758] ---- ----
[ 914.119765] lock(&rdev->wiphy.mtx);
[ 914.119778] lock(rtnl_mutex);
[ 914.119792] lock(&rdev->wiphy.mtx);
[ 914.119807] lock((wq_completion)phy0);
[ 914.119819]
*** DEADLOCK ***
[ 914.119827] 2 locks held by ifconfig/2805:
[ 914.119837] #0: ffffffffba3dc010 (rtnl_mutex){+.+.}-{4:4}, at: rtnl_lock+0x17/0x20
[ 914.119872] #1: ffff9c00baea07d0 (&rdev->wiphy.mtx){+.+.}-{4:4}, at: ieee80211_stop+0x38/0x180 [mac80211]
[ 914.120039]
stack backtrace:
[ 914.120048] CPU: 0 PID: 2805 Comm: ifconfig Tainted: G OE 5.16.0-rc1-wt-ath+ #1
[ 914.120064] Hardware name: LENOVO 418065C/418065C, BIOS 83ET63WW (1.33 ) 07/29/2011
[ 914.120074] Call Trace:
[ 914.120084] <TASK>
[ 914.120094] dump_stack_lvl+0x73/0xa4
[ 914.120119] dump_stack+0x10/0x12
[ 914.120135] print_circular_bug.isra.44+0x221/0x2e0
[ 914.120165] check_noncircular+0x106/0x150
[ 914.120203] __lock_acquire+0x146d/0x1cf0
[ 914.120215] ? __lock_acquire+0x146d/0x1cf0
[ 914.120245] lock_acquire+0x19b/0x360
[ 914.120259] ? flush_workqueue+0x87/0x470
[ 914.120286] ? lockdep_init_map_type+0x6b/0x250
[ 914.120310] flush_workqueue+0xae/0x470
[ 914.120327] ? flush_workqueue+0x87/0x470
[ 914.120344] ? lockdep_hardirqs_on+0xd7/0x150
[ 914.120391] ieee80211_stop_device+0x3b/0x50 [mac80211]
[ 914.120565] ? ieee80211_stop_device+0x3b/0x50 [mac80211]
[ 914.120736] ieee80211_do_stop+0x5d7/0x830 [mac80211]
[ 914.120906] ieee80211_stop+0x45/0x180 [mac80211]
[ 914.121060] __dev_close_many+0xb3/0x120
[ 914.121081] __dev_change_flags+0xc3/0x1d0
[ 914.121109] dev_change_flags+0x29/0x70
[ 914.121131] devinet_ioctl+0x653/0x810
[ 914.121149] ? __might_fault+0x77/0x80
[ 914.121179] inet_ioctl+0x193/0x1e0
[ 914.121194] ? inet_ioctl+0x193/0x1e0
[ 914.121218] ? __might_fault+0x77/0x80
[ 914.121238] ? _copy_to_user+0x68/0x80
[ 914.121266] sock_do_ioctl+0x4d/0xf0
[ 914.121283] ? inet_stream_connect+0x60/0x60
[ 914.121297] ? sock_do_ioctl+0x4d/0xf0
[ 914.121329] sock_ioctl+0x262/0x340
[ 914.121347] ? sock_ioctl+0x262/0x340
[ 914.121362] ? exit_to_user_mode_prepare+0x13b/0x280
[ 914.121388] ? syscall_enter_from_user_mode+0x20/0x50
[ 914.121416] __x64_sys_ioctl+0x96/0xd0
[ 914.121430] ? br_ioctl_call+0x90/0x90
[ 914.121445] ? __x64_sys_ioctl+0x96/0xd0
[ 914.121465] do_syscall_64+0x3d/0xd0
[ 914.121482] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 914.121497] RIP: 0033:0x7f0ed051737b
[ 914.121513] Code: 0f 1e fa 48 8b 05 15 3b 0d 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d e5 3a 0d 00 f7 d8 64 89 01 48
[ 914.121527] RSP: 002b:00007fff7be38b98 EFLAGS: 00000202 ORIG_RAX: 0000000000000010
[ 914.121544] RAX: ffffffffffffffda RBX: 00007fff7be38ba0 RCX: 00007f0ed051737b
[ 914.121555] RDX: 00007fff7be38ba0 RSI: 0000000000008914 RDI: 0000000000000004
[ 914.121566] RBP: 00007fff7be38c60 R08: 000000000000000a R09: 0000000000000001
[ 914.121576] R10: 0000000000000000 R11: 0000000000000202 R12: 00000000fffffffe
[ 914.121586] R13: 0000000000000004 R14: 0000000000000000 R15: 0000000000000000
[ 914.121620] </TASK>
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
Signed-off-by: Wen Gong <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/ath11k/wmi.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath11k/wmi.c b/drivers/net/wireless/ath/ath11k/wmi.c
index acf1641ce88fd..53846dc9a5c5a 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.c
+++ b/drivers/net/wireless/ath/ath11k/wmi.c
@@ -5422,7 +5422,7 @@ static int ath11k_reg_chan_list_event(struct ath11k_base *ab, struct sk_buff *sk
ar = ab->pdevs[pdev_idx].ar;
kfree(ab->new_regd[pdev_idx]);
ab->new_regd[pdev_idx] = regd;
- ieee80211_queue_work(ar->hw, &ar->regd_update_work);
+ queue_work(ab->workqueue, &ar->regd_update_work);
} else {
/* This regd would be applied during mac registration and is
* held constant throughout for regd intersection purpose
--
2.34.1
From: Sriram R <[email protected]>
[ Upstream commit a93789ae541c7d5c1c2a4942013adb6bcc5e2848 ]
Currently 'ar' reference is not added in skb_cb during
WMI mgmt tx. Though this is generally not used during tx completion
callbacks, on interface removal the remaining idr cleanup callback
uses the ar ptr from skb_cb from mgmt txmgmt_idr. Hence
fill them during tx call for proper usage.
Also free the skb which is missing currently in these
callbacks.
Crash_info:
[19282.489476] Unable to handle kernel NULL pointer dereference at virtual address 00000000
[19282.489515] pgd = 91eb8000
[19282.496702] [00000000] *pgd=00000000
[19282.502524] Internal error: Oops: 5 [#1] PREEMPT SMP ARM
[19282.783728] PC is at ath11k_mac_vif_txmgmt_idr_remove+0x28/0xd8 [ath11k]
[19282.789170] LR is at idr_for_each+0xa0/0xc8
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-00729-QCAHKSWPL_SILICONZ-3 v2
Signed-off-by: Sriram R <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/ath11k/mac.c | 35 +++++++++++++++------------
1 file changed, 20 insertions(+), 15 deletions(-)
diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
index 18e841e1a016d..cc9122f420243 100644
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -1,6 +1,7 @@
// SPDX-License-Identifier: BSD-3-Clause-Clear
/*
* Copyright (c) 2018-2019 The Linux Foundation. All rights reserved.
+ * Copyright (c) 2021 Qualcomm Innovation Center, Inc. All rights reserved.
*/
#include <net/mac80211.h>
@@ -3883,23 +3884,32 @@ static int __ath11k_set_antenna(struct ath11k *ar, u32 tx_ant, u32 rx_ant)
return 0;
}
-int ath11k_mac_tx_mgmt_pending_free(int buf_id, void *skb, void *ctx)
+static void ath11k_mac_tx_mgmt_free(struct ath11k *ar, int buf_id)
{
- struct sk_buff *msdu = skb;
+ struct sk_buff *msdu;
struct ieee80211_tx_info *info;
- struct ath11k *ar = ctx;
- struct ath11k_base *ab = ar->ab;
spin_lock_bh(&ar->txmgmt_idr_lock);
- idr_remove(&ar->txmgmt_idr, buf_id);
+ msdu = idr_remove(&ar->txmgmt_idr, buf_id);
spin_unlock_bh(&ar->txmgmt_idr_lock);
- dma_unmap_single(ab->dev, ATH11K_SKB_CB(msdu)->paddr, msdu->len,
+
+ if (!msdu)
+ return;
+
+ dma_unmap_single(ar->ab->dev, ATH11K_SKB_CB(msdu)->paddr, msdu->len,
DMA_TO_DEVICE);
info = IEEE80211_SKB_CB(msdu);
memset(&info->status, 0, sizeof(info->status));
ieee80211_free_txskb(ar->hw, msdu);
+}
+
+int ath11k_mac_tx_mgmt_pending_free(int buf_id, void *skb, void *ctx)
+{
+ struct ath11k *ar = ctx;
+
+ ath11k_mac_tx_mgmt_free(ar, buf_id);
return 0;
}
@@ -3908,17 +3918,10 @@ static int ath11k_mac_vif_txmgmt_idr_remove(int buf_id, void *skb, void *ctx)
{
struct ieee80211_vif *vif = ctx;
struct ath11k_skb_cb *skb_cb = ATH11K_SKB_CB((struct sk_buff *)skb);
- struct sk_buff *msdu = skb;
struct ath11k *ar = skb_cb->ar;
- struct ath11k_base *ab = ar->ab;
- if (skb_cb->vif == vif) {
- spin_lock_bh(&ar->txmgmt_idr_lock);
- idr_remove(&ar->txmgmt_idr, buf_id);
- spin_unlock_bh(&ar->txmgmt_idr_lock);
- dma_unmap_single(ab->dev, skb_cb->paddr, msdu->len,
- DMA_TO_DEVICE);
- }
+ if (skb_cb->vif == vif)
+ ath11k_mac_tx_mgmt_free(ar, buf_id);
return 0;
}
@@ -3933,6 +3936,8 @@ static int ath11k_mac_mgmt_tx_wmi(struct ath11k *ar, struct ath11k_vif *arvif,
int buf_id;
int ret;
+ ATH11K_SKB_CB(skb)->ar = ar;
+
spin_lock_bh(&ar->txmgmt_idr_lock);
buf_id = idr_alloc(&ar->txmgmt_idr, skb, 0,
ATH11K_TX_MGMT_NUM_PENDING_MAX, GFP_ATOMIC);
--
2.34.1
From: Ping-Ke Shih <[email protected]>
[ Upstream commit 04be6d337d37400ad5b3d5f27ca87645ee5a18a3 ]
Some AP can possibly try non-standard VHT rate and mac80211 warns and drops
packets, and leads low TCP throughput.
Rate marked as a VHT rate but data is invalid: MCS: 10, NSS: 2
WARNING: CPU: 1 PID: 7817 at net/mac80211/rx.c:4856 ieee80211_rx_list+0x223/0x2f0 [mac8021
Since commit c27aa56a72b8 ("cfg80211: add VHT rate entries for MCS-10 and MCS-11")
has added, mac80211 adds this support as well.
After this patch, throughput is good and iw can get the bitrate:
rx bitrate: 975.1 MBit/s VHT-MCS 10 80MHz short GI VHT-NSS 2
or
rx bitrate: 1083.3 MBit/s VHT-MCS 11 80MHz short GI VHT-NSS 2
Buglink: https://bugzilla.suse.com/show_bug.cgi?id=1192891
Reported-by: Goldwyn Rodrigues <[email protected]>
Signed-off-by: Ping-Ke Shih <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/mac80211/rx.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index 6a24431b90095..d27c444a19ed1 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -4800,7 +4800,7 @@ void ieee80211_rx_list(struct ieee80211_hw *hw, struct ieee80211_sta *pubsta,
goto drop;
break;
case RX_ENC_VHT:
- if (WARN_ONCE(status->rate_idx > 9 ||
+ if (WARN_ONCE(status->rate_idx > 11 ||
!status->nss ||
status->nss > 8,
"Rate marked as a VHT rate but data is invalid: MCS: %d, NSS: %d\n",
--
2.34.1
From: Florian Fainelli <[email protected]>
[ Upstream commit 7590fc6f80ac2cbf23e6b42b668bbeded070850b ]
On systems with large numbers of MDIO bus/muxes the message indicating
that a given MDIO bus has been successfully probed is repeated for as
many buses we have, which can eat up substantial boot time for no
reason, demote to a debug print.
Reported-by: Maxime Bizon <[email protected]>
Signed-off-by: Florian Fainelli <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/phy/mdio_bus.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index 2645ca35103c9..c416ab1d2b008 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -588,7 +588,7 @@ int __mdiobus_register(struct mii_bus *bus, struct module *owner)
mdiobus_setup_mdiodev_from_board_info(bus, mdiobus_create_device);
bus->state = MDIOBUS_REGISTERED;
- pr_info("%s: probed\n", bus->name);
+ dev_dbg(&bus->dev, "probed\n");
return 0;
error:
--
2.34.1
From: James Smart <[email protected]>
[ Upstream commit 7dd2e2a923173d637c272e483966be8e96a72b64 ]
Extraneous teardown routines are present in the firmware dump path causing
altered states in firmware captures.
When a firmware dump is requested via sysfs, trigger the dump immediately
without tearing down structures and changing adapter state.
The driver shall rely on pre-existing firmware error state clean up
handlers to restore the adapter.
Link: https://lore.kernel.org/r/[email protected]
Co-developed-by: Justin Tee <[email protected]>
Signed-off-by: Justin Tee <[email protected]>
Signed-off-by: James Smart <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/lpfc/lpfc.h | 2 +-
drivers/scsi/lpfc/lpfc_attr.c | 62 ++++++++++++++++++++------------
drivers/scsi/lpfc/lpfc_hbadisc.c | 8 ++++-
drivers/scsi/lpfc/lpfc_sli.c | 6 ----
4 files changed, 48 insertions(+), 30 deletions(-)
diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
index 93e507677bdcb..0273bf3918ff3 100644
--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h
@@ -763,7 +763,6 @@ struct lpfc_hba {
#define HBA_DEVLOSS_TMO 0x2000 /* HBA in devloss timeout */
#define HBA_RRQ_ACTIVE 0x4000 /* process the rrq active list */
#define HBA_IOQ_FLUSH 0x8000 /* FCP/NVME I/O queues being flushed */
-#define HBA_FW_DUMP_OP 0x10000 /* Skips fn reset before FW dump */
#define HBA_RECOVERABLE_UE 0x20000 /* Firmware supports recoverable UE */
#define HBA_FORCED_LINK_SPEED 0x40000 /*
* Firmware supports Forced Link Speed
@@ -772,6 +771,7 @@ struct lpfc_hba {
#define HBA_FLOGI_ISSUED 0x100000 /* FLOGI was issued */
#define HBA_DEFER_FLOGI 0x800000 /* Defer FLOGI till read_sparm cmpl */
+ struct completion *fw_dump_cmpl; /* cmpl event tracker for fw_dump */
uint32_t fcp_ring_in_use; /* When polling test if intr-hndlr active*/
struct lpfc_dmabuf slim2p;
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index 2c59a5bf35390..727b7ba4d8f82 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -1536,25 +1536,25 @@ lpfc_sli4_pdev_reg_request(struct lpfc_hba *phba, uint32_t opcode)
before_fc_flag = phba->pport->fc_flag;
sriov_nr_virtfn = phba->cfg_sriov_nr_virtfn;
- /* Disable SR-IOV virtual functions if enabled */
- if (phba->cfg_sriov_nr_virtfn) {
- pci_disable_sriov(pdev);
- phba->cfg_sriov_nr_virtfn = 0;
- }
+ if (opcode == LPFC_FW_DUMP) {
+ init_completion(&online_compl);
+ phba->fw_dump_cmpl = &online_compl;
+ } else {
+ /* Disable SR-IOV virtual functions if enabled */
+ if (phba->cfg_sriov_nr_virtfn) {
+ pci_disable_sriov(pdev);
+ phba->cfg_sriov_nr_virtfn = 0;
+ }
- if (opcode == LPFC_FW_DUMP)
- phba->hba_flag |= HBA_FW_DUMP_OP;
+ status = lpfc_do_offline(phba, LPFC_EVT_OFFLINE);
- status = lpfc_do_offline(phba, LPFC_EVT_OFFLINE);
+ if (status != 0)
+ return status;
- if (status != 0) {
- phba->hba_flag &= ~HBA_FW_DUMP_OP;
- return status;
+ /* wait for the device to be quiesced before firmware reset */
+ msleep(100);
}
- /* wait for the device to be quiesced before firmware reset */
- msleep(100);
-
reg_val = readl(phba->sli4_hba.conf_regs_memmap_p +
LPFC_CTL_PDEV_CTL_OFFSET);
@@ -1583,24 +1583,42 @@ lpfc_sli4_pdev_reg_request(struct lpfc_hba *phba, uint32_t opcode)
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
"3153 Fail to perform the requested "
"access: x%x\n", reg_val);
+ if (phba->fw_dump_cmpl)
+ phba->fw_dump_cmpl = NULL;
return rc;
}
/* keep the original port state */
- if (before_fc_flag & FC_OFFLINE_MODE)
- goto out;
-
- init_completion(&online_compl);
- job_posted = lpfc_workq_post_event(phba, &status, &online_compl,
- LPFC_EVT_ONLINE);
- if (!job_posted)
+ if (before_fc_flag & FC_OFFLINE_MODE) {
+ if (phba->fw_dump_cmpl)
+ phba->fw_dump_cmpl = NULL;
goto out;
+ }
- wait_for_completion(&online_compl);
+ /* Firmware dump will trigger an HA_ERATT event, and
+ * lpfc_handle_eratt_s4 routine already handles bringing the port back
+ * online.
+ */
+ if (opcode == LPFC_FW_DUMP) {
+ wait_for_completion(phba->fw_dump_cmpl);
+ } else {
+ init_completion(&online_compl);
+ job_posted = lpfc_workq_post_event(phba, &status, &online_compl,
+ LPFC_EVT_ONLINE);
+ if (!job_posted)
+ goto out;
+ wait_for_completion(&online_compl);
+ }
out:
/* in any case, restore the virtual functions enabled as before */
if (sriov_nr_virtfn) {
+ /* If fw_dump was performed, first disable to clean up */
+ if (opcode == LPFC_FW_DUMP) {
+ pci_disable_sriov(pdev);
+ phba->cfg_sriov_nr_virtfn = 0;
+ }
+
sriov_err =
lpfc_sli_probe_sriov_nr_virtfn(phba, sriov_nr_virtfn);
if (!sriov_err)
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index f4a672e549716..68ff233f936e5 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -635,10 +635,16 @@ lpfc_work_done(struct lpfc_hba *phba)
if (phba->pci_dev_grp == LPFC_PCI_DEV_OC)
lpfc_sli4_post_async_mbox(phba);
- if (ha_copy & HA_ERATT)
+ if (ha_copy & HA_ERATT) {
/* Handle the error attention event */
lpfc_handle_eratt(phba);
+ if (phba->fw_dump_cmpl) {
+ complete(phba->fw_dump_cmpl);
+ phba->fw_dump_cmpl = NULL;
+ }
+ }
+
if (ha_copy & HA_MBATT)
lpfc_sli_handle_mb_event(phba);
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 06a23718a7c7f..1a9522baba484 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -4629,12 +4629,6 @@ lpfc_sli4_brdreset(struct lpfc_hba *phba)
phba->fcf.fcf_flag = 0;
spin_unlock_irq(&phba->hbalock);
- /* SLI4 INTF 2: if FW dump is being taken skip INIT_PORT */
- if (phba->hba_flag & HBA_FW_DUMP_OP) {
- phba->hba_flag &= ~HBA_FW_DUMP_OP;
- return rc;
- }
-
/* Now physically reset the device */
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
"0389 Performing PCI function reset!\n");
--
2.34.1
From: Josef Bacik <[email protected]>
[ Upstream commit fcba0120edf88328524a4878d1d6f4ad39f2ec81 ]
We search for an extent entry with .offset = -1, which shouldn't be a
thing, but corruption happens. Add an ASSERT() for the developers,
return -EUCLEAN for mortals.
Signed-off-by: Josef Bacik <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/btrfs/backref.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/fs/btrfs/backref.c b/fs/btrfs/backref.c
index 6e447bdaf9ec8..8b471579e26e1 100644
--- a/fs/btrfs/backref.c
+++ b/fs/btrfs/backref.c
@@ -1213,7 +1213,12 @@ again:
ret = btrfs_search_slot(trans, fs_info->extent_root, &key, path, 0, 0);
if (ret < 0)
goto out;
- BUG_ON(ret == 0);
+ if (ret == 0) {
+ /* This shouldn't happen, indicates a bug or fs corruption. */
+ ASSERT(ret != 0);
+ ret = -EUCLEAN;
+ goto out;
+ }
#ifdef CONFIG_BTRFS_FS_RUN_SANITY_TESTS
if (trans && likely(trans->type != __TRANS_DUMMY) &&
--
2.34.1
From: Christoph Hellwig <[email protected]>
[ Upstream commit d751939235b9b7bc4af15f90a3e99288a8b844a7 ]
Make sure ->dax_dev is NULL on error so that the cleanup path doesn't
trip over an ERR_PTR.
Reported-by: Dan Williams <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dan Williams <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/md/dm.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/md/dm.c b/drivers/md/dm.c
index 19a70f434029b..6030cba5b0382 100644
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -1894,8 +1894,10 @@ static struct mapped_device *alloc_dev(int minor)
if (IS_ENABLED(CONFIG_DAX_DRIVER)) {
md->dax_dev = alloc_dax(md, md->disk->disk_name,
&dm_dax_ops, 0);
- if (IS_ERR(md->dax_dev))
+ if (IS_ERR(md->dax_dev)) {
+ md->dax_dev = NULL;
goto bad;
+ }
}
add_disk_no_queue_reg(md->disk);
--
2.34.1
From: Kirill A. Shutemov <[email protected]>
[ Upstream commit 1d4e0b3abb168b2ee1eca99c527cffa1b80b6161 ]
ACPICA commit 3dd7e1f3996456ef81bfe14cba29860e8d42949e
According to ACPI 6.4, Section 16.2, the CPU cache flushing is
required on entering to S1, S2, and S3, but the ACPICA code
flushes the CPU cache regardless of the sleep state.
Blind cache flush on entering S5 causes problems for TDX.
Flushing happens with WBINVD that is not supported in the TDX
environment.
TDX only supports S5 and adjusting ACPICA code to conform to the
spec more strictly fixes the issue.
Link: https://github.com/acpica/acpica/commit/3dd7e1f3
Signed-off-by: Kirill A. Shutemov <[email protected]>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Bob Moore <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/acpi/acpica/hwesleep.c | 4 +++-
drivers/acpi/acpica/hwsleep.c | 4 +++-
drivers/acpi/acpica/hwxfsleep.c | 2 --
3 files changed, 6 insertions(+), 4 deletions(-)
diff --git a/drivers/acpi/acpica/hwesleep.c b/drivers/acpi/acpica/hwesleep.c
index 4836a4b8b38b8..142a755be6881 100644
--- a/drivers/acpi/acpica/hwesleep.c
+++ b/drivers/acpi/acpica/hwesleep.c
@@ -104,7 +104,9 @@ acpi_status acpi_hw_extended_sleep(u8 sleep_state)
/* Flush caches, as per ACPI specification */
- ACPI_FLUSH_CPU_CACHE();
+ if (sleep_state < ACPI_STATE_S4) {
+ ACPI_FLUSH_CPU_CACHE();
+ }
status = acpi_os_enter_sleep(sleep_state, sleep_control, 0);
if (status == AE_CTRL_TERMINATE) {
diff --git a/drivers/acpi/acpica/hwsleep.c b/drivers/acpi/acpica/hwsleep.c
index fcc84d196238a..6a20bb5059c1d 100644
--- a/drivers/acpi/acpica/hwsleep.c
+++ b/drivers/acpi/acpica/hwsleep.c
@@ -110,7 +110,9 @@ acpi_status acpi_hw_legacy_sleep(u8 sleep_state)
/* Flush caches, as per ACPI specification */
- ACPI_FLUSH_CPU_CACHE();
+ if (sleep_state < ACPI_STATE_S4) {
+ ACPI_FLUSH_CPU_CACHE();
+ }
status = acpi_os_enter_sleep(sleep_state, pm1a_control, pm1b_control);
if (status == AE_CTRL_TERMINATE) {
diff --git a/drivers/acpi/acpica/hwxfsleep.c b/drivers/acpi/acpica/hwxfsleep.c
index f1645d87864c3..3948c34d85830 100644
--- a/drivers/acpi/acpica/hwxfsleep.c
+++ b/drivers/acpi/acpica/hwxfsleep.c
@@ -162,8 +162,6 @@ acpi_status acpi_enter_sleep_state_s4bios(void)
return_ACPI_STATUS(status);
}
- ACPI_FLUSH_CPU_CACHE();
-
status = acpi_hw_write_port(acpi_gbl_FADT.smi_command,
(u32)acpi_gbl_FADT.s4_bios_request, 8);
if (ACPI_FAILURE(status)) {
--
2.34.1
From: Joe Thornber <[email protected]>
[ Upstream commit cba23ac158db7f3cd48a923d6861bee2eb7a2978 ]
Corrupted metadata could warrant returning error from sm_ll_lookup_bitmap().
Signed-off-by: Joe Thornber <[email protected]>
Signed-off-by: Mike Snitzer <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/md/persistent-data/dm-space-map-common.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/md/persistent-data/dm-space-map-common.c b/drivers/md/persistent-data/dm-space-map-common.c
index a213bf11738fb..85853ab629717 100644
--- a/drivers/md/persistent-data/dm-space-map-common.c
+++ b/drivers/md/persistent-data/dm-space-map-common.c
@@ -281,6 +281,11 @@ int sm_ll_lookup_bitmap(struct ll_disk *ll, dm_block_t b, uint32_t *result)
struct disk_index_entry ie_disk;
struct dm_block *blk;
+ if (b >= ll->nr_blocks) {
+ DMERR_LIMIT("metadata block out of bounds");
+ return -EINVAL;
+ }
+
b = do_div(index, ll->entries_per_block);
r = ll->load_ie(ll, index, &ie_disk);
if (r < 0)
--
2.34.1
From: Lucas Stach <[email protected]>
commit 6dfa2fab8ddd46faa771a102672176bee7a065de upstream.
Currently we allow rediculous amounts of kernel memory being allocated
via the etnaviv GEM_SUBMIT ioctl, which is a pretty easy DoS vector. Put
some reasonable limits in to fix this.
The commandstream size is limited to 64KB, which was already a soft limit
on older kernels after which the kernel only took submits on a best effort
base, so there is no userspace that tries to submit commandstreams larger
than this. Even if the whole commandstream is a single incrementing address
load, the size limit also limits the number of potential relocs and
referenced buffers to slightly under 64K, so use the same limit for those
arguments. The performance monitoring infrastructure currently supports
less than 50 performance counter signals, so limiting them to 128 on a
single submit seems like a reasonably future-proof number for now. This
number can be bumped if needed without breaking the interface.
Cc: [email protected]
Reported-by: Dan Carpenter <[email protected]>
Signed-off-by: Lucas Stach <[email protected]>
Reviewed-by: Christian Gmeiner <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/etnaviv/etnaviv_gem_submit.c | 6 ++++++
1 file changed, 6 insertions(+)
--- a/drivers/gpu/drm/etnaviv/etnaviv_gem_submit.c
+++ b/drivers/gpu/drm/etnaviv/etnaviv_gem_submit.c
@@ -469,6 +469,12 @@ int etnaviv_ioctl_gem_submit(struct drm_
return -EINVAL;
}
+ if (args->stream_size > SZ_64K || args->nr_relocs > SZ_64K ||
+ args->nr_bos > SZ_64K || args->nr_pmrs > 128) {
+ DRM_ERROR("submit arguments out of size limits\n");
+ return -EINVAL;
+ }
+
/*
* Copy the command submission and bo array to kernel space in
* one go, and do this outside of any locks.
From: Ilia Mirkin <[email protected]>
commit bd6e07e72f37f34535bec7eebc807e5fcfe37b43 upstream.
The struct is giant, and triggers an order-7 allocation (512K). There is
no reason for this to be kmalloc-type memory, so switch to vmalloc. This
should help loading nouveau on low-memory and/or long-running systems.
Reported-by: Nathan E. Egge <[email protected]>
Signed-off-by: Ilia Mirkin <[email protected]>
Cc: [email protected]
Signed-off-by: Ben Skeggs <[email protected]>
Reviewed-by: Karol Herbst <[email protected]>
Signed-off-by: Karol Herbst <[email protected]>
Link: https://gitlab.freedesktop.org/drm/nouveau/-/merge_requests/10
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/nouveau/dispnv04/disp.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/gpu/drm/nouveau/dispnv04/disp.c
+++ b/drivers/gpu/drm/nouveau/dispnv04/disp.c
@@ -205,7 +205,7 @@ nv04_display_destroy(struct drm_device *
nvif_notify_dtor(&disp->flip);
nouveau_display(dev)->priv = NULL;
- kfree(disp);
+ vfree(disp);
nvif_object_unmap(&drm->client.device.object);
}
@@ -223,7 +223,7 @@ nv04_display_create(struct drm_device *d
struct nv04_display *disp;
int i, ret;
- disp = kzalloc(sizeof(*disp), GFP_KERNEL);
+ disp = vzalloc(sizeof(*disp));
if (!disp)
return -ENOMEM;
From: Kunihiko Hayashi <[email protected]>
commit 105a8c525675bb7d4d64871f9b2edf39460de881 upstream.
The variables src_addr and dst_addr handle DMA addresses, so these should
be declared as dma_addr_t.
Fixes: 667b9251440b ("dmaengine: uniphier-xdmac: Add UniPhier external DMA controller driver")
Signed-off-by: Kunihiko Hayashi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/dma/uniphier-xdmac.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/drivers/dma/uniphier-xdmac.c
+++ b/drivers/dma/uniphier-xdmac.c
@@ -131,8 +131,9 @@ uniphier_xdmac_next_desc(struct uniphier
static void uniphier_xdmac_chan_start(struct uniphier_xdmac_chan *xc,
struct uniphier_xdmac_desc *xd)
{
- u32 src_mode, src_addr, src_width;
- u32 dst_mode, dst_addr, dst_width;
+ u32 src_mode, src_width;
+ u32 dst_mode, dst_width;
+ dma_addr_t src_addr, dst_addr;
u32 val, its, tnum;
enum dma_slave_buswidth buswidth;
From: Randy Dunlap <[email protected]>
commit 09f4d1513267d0ab712f5d29e7bd136535748709 upstream.
Fix grammar/wording in the help text for MEDIA_TEST_SUPPORT.
Fixes: 4b32216adb01 ("media: split test drivers from platform directory")
Signed-off-by: Randy Dunlap <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/Kconfig | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/drivers/media/Kconfig
+++ b/drivers/media/Kconfig
@@ -142,10 +142,10 @@ config MEDIA_TEST_SUPPORT
prompt "Test drivers" if MEDIA_SUPPORT_FILTER
default y if !MEDIA_SUPPORT_FILTER
help
- Those drivers should not be used on production Kernels, but
- can be useful on debug ones. It enables several dummy drivers
- that simulate a real hardware. Very useful to test userspace
- applications and to validate if the subsystem core is doesn't
+ These drivers should not be used on production kernels, but
+ can be useful on debug ones. This option enables several dummy drivers
+ that simulate real hardware. Very useful to test userspace
+ applications and to validate if the subsystem core doesn't
have regressions.
Say Y if you want to use some virtual test driver.
From: Tudor Ambarus <[email protected]>
commit 1385eb4d14d447cc5d744bc2ac34f43be66c9963 upstream.
AT_XDMAC_CNDC_NDVIEW_NDV3 was set even for AT_XDMAC_MBR_UBC_NDV2,
because of the wrong bit handling. Fix it.
Fixes: ee0fe35c8dcd ("dmaengine: xdmac: Handle descriptor's view 3 registers")
Signed-off-by: Tudor Ambarus <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/dma/at_xdmac.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/dma/at_xdmac.c
+++ b/drivers/dma/at_xdmac.c
@@ -89,6 +89,7 @@
#define AT_XDMAC_CNDC_NDE (0x1 << 0) /* Channel x Next Descriptor Enable */
#define AT_XDMAC_CNDC_NDSUP (0x1 << 1) /* Channel x Next Descriptor Source Update */
#define AT_XDMAC_CNDC_NDDUP (0x1 << 2) /* Channel x Next Descriptor Destination Update */
+#define AT_XDMAC_CNDC_NDVIEW_MASK GENMASK(28, 27)
#define AT_XDMAC_CNDC_NDVIEW_NDV0 (0x0 << 3) /* Channel x Next Descriptor View 0 */
#define AT_XDMAC_CNDC_NDVIEW_NDV1 (0x1 << 3) /* Channel x Next Descriptor View 1 */
#define AT_XDMAC_CNDC_NDVIEW_NDV2 (0x2 << 3) /* Channel x Next Descriptor View 2 */
@@ -353,7 +354,8 @@ static void at_xdmac_start_xfer(struct a
*/
if (at_xdmac_chan_is_cyclic(atchan))
reg = AT_XDMAC_CNDC_NDVIEW_NDV1;
- else if (first->lld.mbr_ubc & AT_XDMAC_MBR_UBC_NDV3)
+ else if ((first->lld.mbr_ubc &
+ AT_XDMAC_CNDC_NDVIEW_MASK) == AT_XDMAC_MBR_UBC_NDV3)
reg = AT_XDMAC_CNDC_NDVIEW_NDV3;
else
reg = AT_XDMAC_CNDC_NDVIEW_NDV2;
From: Hari Bathini <[email protected]>
[ Upstream commit 06e629c25daa519be620a8c17359ae8fc7a2e903 ]
In panic path, fadump is triggered via a panic notifier function.
Before calling panic notifier functions, smp_send_stop() gets called,
which stops all CPUs except the panic'ing CPU. Commit 8389b37dffdc
("powerpc: stop_this_cpu: remove the cpu from the online map.") and
again commit bab26238bbd4 ("powerpc: Offline CPU in stop_this_cpu()")
started marking CPUs as offline while stopping them. So, if a kernel
has either of the above commits, vmcore captured with fadump via panic
path would not process register data for all CPUs except the panic'ing
CPU. Sample output of crash-utility with such vmcore:
# crash vmlinux vmcore
...
KERNEL: vmlinux
DUMPFILE: vmcore [PARTIAL DUMP]
CPUS: 1
DATE: Wed Nov 10 09:56:34 EST 2021
UPTIME: 00:00:42
LOAD AVERAGE: 2.27, 0.69, 0.24
TASKS: 183
NODENAME: XXXXXXXXX
RELEASE: 5.15.0+
VERSION: #974 SMP Wed Nov 10 04:18:19 CST 2021
MACHINE: ppc64le (2500 Mhz)
MEMORY: 8 GB
PANIC: "Kernel panic - not syncing: sysrq triggered crash"
PID: 3394
COMMAND: "bash"
TASK: c0000000150a5f80 [THREAD_INFO: c0000000150a5f80]
CPU: 1
STATE: TASK_RUNNING (PANIC)
crash> p -x __cpu_online_mask
__cpu_online_mask = $1 = {
bits = {0x2, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}
}
crash>
crash>
crash> p -x __cpu_active_mask
__cpu_active_mask = $2 = {
bits = {0xff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}
}
crash>
While this has been the case since fadump was introduced, the issue
was not identified for two probable reasons:
- In general, the bulk of the vmcores analyzed were from crash
due to exception.
- The above did change since commit 8341f2f222d7 ("sysrq: Use
panic() to force a crash") started using panic() instead of
deferencing NULL pointer to force a kernel crash. But then
commit de6e5d38417e ("powerpc: smp_send_stop do not offline
stopped CPUs") stopped marking CPUs as offline till kernel
commit bab26238bbd4 ("powerpc: Offline CPU in stop_this_cpu()")
reverted that change.
To ensure post processing register data of all other CPUs happens
as intended, let panic() function take the crash friendly path (read
crash_smp_send_stop()) with the help of crash_kexec_post_notifiers
option. Also, as register data for all CPUs is captured by f/w, skip
IPI callbacks here for fadump, to avoid any complications in finding
the right backtraces.
Signed-off-by: Hari Bathini <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/kernel/fadump.c | 8 ++++++++
arch/powerpc/kernel/smp.c | 10 ++++++++++
2 files changed, 18 insertions(+)
diff --git a/arch/powerpc/kernel/fadump.c b/arch/powerpc/kernel/fadump.c
index eddf362caedce..c3bb800dc4352 100644
--- a/arch/powerpc/kernel/fadump.c
+++ b/arch/powerpc/kernel/fadump.c
@@ -1641,6 +1641,14 @@ int __init setup_fadump(void)
else if (fw_dump.reserve_dump_area_size)
fw_dump.ops->fadump_init_mem_struct(&fw_dump);
+ /*
+ * In case of panic, fadump is triggered via ppc_panic_event()
+ * panic notifier. Setting crash_kexec_post_notifiers to 'true'
+ * lets panic() function take crash friendly path before panic
+ * notifiers are invoked.
+ */
+ crash_kexec_post_notifiers = true;
+
return 1;
}
subsys_initcall(setup_fadump);
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index d993f28107afa..cf99f57aed822 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -60,6 +60,7 @@
#include <asm/cpu_has_feature.h>
#include <asm/ftrace.h>
#include <asm/kup.h>
+#include <asm/fadump.h>
#ifdef DEBUG
#include <asm/udbg.h>
@@ -612,6 +613,15 @@ void crash_smp_send_stop(void)
{
static bool stopped = false;
+ /*
+ * In case of fadump, register data for all CPUs is captured by f/w
+ * on ibm,os-term rtas call. Skip IPI callbacks to other CPUs before
+ * this rtas call to avoid tricky post processing of those CPUs'
+ * backtraces.
+ */
+ if (should_fadump_crash())
+ return;
+
if (stopped)
return;
--
2.34.1
From: Pali Rohár <[email protected]>
commit 1f1050c5e1fefb34ac90a506b43e9da803b5f8f7 upstream.
Older mvebu hardware provides PCIe Capability structure only in version 1.
New mvebu and aardvark hardware provides it in version 2. So do not force
version to 2 in pci_bridge_emul_init() and rather allow drivers to set
correct version. Drivers need to set version in pcie_conf.cap field without
overwriting PCI_CAP_LIST_ID register. Both drivers (mvebu and aardvark) do
not provide slot support yet, so do not set PCI_EXP_FLAGS_SLOT flag.
Link: https://lore.kernel.org/r/[email protected]
Fixes: 23a5fba4d941 ("PCI: Introduce PCI bridge emulated config space common logic")
Signed-off-by: Pali Rohár <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/controller/pci-aardvark.c | 4 +++-
drivers/pci/controller/pci-mvebu.c | 8 ++++++++
drivers/pci/pci-bridge-emul.c | 5 +----
3 files changed, 12 insertions(+), 5 deletions(-)
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -879,7 +879,6 @@ advk_pci_bridge_emul_pcie_conf_read(stru
return PCI_BRIDGE_EMUL_HANDLED;
}
- case PCI_CAP_LIST_ID:
case PCI_EXP_DEVCAP:
case PCI_EXP_DEVCTL:
*value = advk_readl(pcie, PCIE_CORE_PCIEXP_CAP + reg);
@@ -960,6 +959,9 @@ static int advk_sw_pci_bridge_init(struc
/* Support interrupt A for MSI feature */
bridge->conf.intpin = PCIE_CORE_INT_A_ASSERT_ENABLE;
+ /* Aardvark HW provides PCIe Capability structure in version 2 */
+ bridge->pcie_conf.cap = cpu_to_le16(2);
+
/* Indicates supports for Completion Retry Status */
bridge->pcie_conf.rootcap = cpu_to_le16(PCI_EXP_RTCAP_CRSVIS);
--- a/drivers/pci/controller/pci-mvebu.c
+++ b/drivers/pci/controller/pci-mvebu.c
@@ -573,6 +573,8 @@ static struct pci_bridge_emul_ops mvebu_
static void mvebu_pci_bridge_emul_init(struct mvebu_pcie_port *port)
{
struct pci_bridge_emul *bridge = &port->bridge;
+ u32 pcie_cap = mvebu_readl(port, PCIE_CAP_PCIEXP);
+ u8 pcie_cap_ver = ((pcie_cap >> 16) & PCI_EXP_FLAGS_VERS);
bridge->conf.vendor = PCI_VENDOR_ID_MARVELL;
bridge->conf.device = mvebu_readl(port, PCIE_DEV_ID_OFF) >> 16;
@@ -585,6 +587,12 @@ static void mvebu_pci_bridge_emul_init(s
bridge->conf.iolimit = PCI_IO_RANGE_TYPE_32;
}
+ /*
+ * Older mvebu hardware provides PCIe Capability structure only in
+ * version 1. New hardware provides it in version 2.
+ */
+ bridge->pcie_conf.cap = cpu_to_le16(pcie_cap_ver);
+
bridge->has_pcie = true;
bridge->data = port;
bridge->ops = &mvebu_pci_bridge_emul_ops;
--- a/drivers/pci/pci-bridge-emul.c
+++ b/drivers/pci/pci-bridge-emul.c
@@ -297,10 +297,7 @@ int pci_bridge_emul_init(struct pci_brid
if (bridge->has_pcie) {
bridge->conf.capabilities_pointer = PCI_CAP_PCIE_START;
bridge->pcie_conf.cap_id = PCI_CAP_ID_EXP;
- /* Set PCIe v2, root port, slot support */
- bridge->pcie_conf.cap =
- cpu_to_le16(PCI_EXP_TYPE_ROOT_PORT << 4 | 2 |
- PCI_EXP_FLAGS_SLOT);
+ bridge->pcie_conf.cap |= cpu_to_le16(PCI_EXP_TYPE_ROOT_PORT << 4);
bridge->pcie_cap_regs_behavior =
kmemdup(pcie_cap_regs_behavior,
sizeof(pcie_cap_regs_behavior),
From: Tudor Ambarus <[email protected]>
commit 5edc24ac876a928f36f407a0fcdb33b94a3a210f upstream.
It is desirable to do the prints without the lock held if possible, so
move the print after the lock is released.
Fixes: e1f7c9eee707 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver")
Signed-off-by: Tudor Ambarus <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/dma/at_xdmac.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/drivers/dma/at_xdmac.c
+++ b/drivers/dma/at_xdmac.c
@@ -424,10 +424,12 @@ static dma_cookie_t at_xdmac_tx_submit(s
spin_lock_irqsave(&atchan->lock, irqflags);
cookie = dma_cookie_assign(tx);
- dev_vdbg(chan2dev(tx->chan), "%s: atchan 0x%p, add desc 0x%p to xfers_list\n",
- __func__, atchan, desc);
list_add_tail(&desc->xfer_node, &atchan->xfers_list);
spin_unlock_irqrestore(&atchan->lock, irqflags);
+
+ dev_vdbg(chan2dev(tx->chan), "%s: atchan 0x%p, add desc 0x%p to xfers_list\n",
+ __func__, atchan, desc);
+
return cookie;
}
From: Tudor Ambarus <[email protected]>
commit 18deddea9184b62941395889ff7659529c877326 upstream.
Since tx_submit can be called from a hard IRQ, xfers_list must be
protected with a lock to avoid concurency on the list's elements.
Since at_xdmac_handle_cyclic() is called from a tasklet, spin_lock_irq
is enough to protect from a hard IRQ.
Fixes: e1f7c9eee707 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver")
Signed-off-by: Tudor Ambarus <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/dma/at_xdmac.c | 17 ++++++++++-------
1 file changed, 10 insertions(+), 7 deletions(-)
--- a/drivers/dma/at_xdmac.c
+++ b/drivers/dma/at_xdmac.c
@@ -1559,14 +1559,17 @@ static void at_xdmac_handle_cyclic(struc
struct at_xdmac_desc *desc;
struct dma_async_tx_descriptor *txd;
- if (!list_empty(&atchan->xfers_list)) {
- desc = list_first_entry(&atchan->xfers_list,
- struct at_xdmac_desc, xfer_node);
- txd = &desc->tx_dma_desc;
-
- if (txd->flags & DMA_PREP_INTERRUPT)
- dmaengine_desc_get_callback_invoke(txd, NULL);
+ spin_lock_irq(&atchan->lock);
+ if (list_empty(&atchan->xfers_list)) {
+ spin_unlock_irq(&atchan->lock);
+ return;
}
+ desc = list_first_entry(&atchan->xfers_list, struct at_xdmac_desc,
+ xfer_node);
+ spin_unlock_irq(&atchan->lock);
+ txd = &desc->tx_dma_desc;
+ if (txd->flags & DMA_PREP_INTERRUPT)
+ dmaengine_desc_get_callback_invoke(txd, NULL);
}
static void at_xdmac_handle_error(struct at_xdmac_chan *atchan)
From: David Heidelberg <[email protected]>
commit c41910f257a22dc406c60d8826b4a3b5398003a3 upstream.
These properties aren't documented nor implemented in the driver.
Drop them.
Fixes warnings as:
$ make dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/display/msm/gpu.yaml
...
arch/arm64/boot/dts/qcom/msm8996-mtp.dt.yaml: gpu@b00000: 'qcom,gpu-quirk-fault-detect-mask', 'qcom,gpu-quirk-two-pass-use-wfi' do not match any of the regexes: 'pinctrl-[0-9]+'
From schema: Documentation/devicetree/bindings/display/msm/gpu.yaml
...
Fixes: 69cc3114ab0f ("arm64: dts: Add Adreno GPU definitions")
Signed-off-by: David Heidelberg <[email protected]>
Signed-off-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm64/boot/dts/qcom/msm8996.dtsi | 3 ---
1 file changed, 3 deletions(-)
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -645,9 +645,6 @@
nvmem-cells = <&gpu_speed_bin>;
nvmem-cell-names = "speed_bin";
- qcom,gpu-quirk-two-pass-use-wfi;
- qcom,gpu-quirk-fault-detect-mask;
-
operating-points-v2 = <&gpu_opp_table>;
gpu_opp_table: opp-table {
From: Tianjia Zhang <[email protected]>
[ Upstream commit 95339b70677dc6f9a2d669c4716058e71b8dc1c7 ]
A large number of the following errors is reported when compiling
with clang:
cvmx-bootinfo.h:326:3: error: adding 'int' to a string does not append to the string [-Werror,-Wstring-plus-int]
ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_NULL)
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cvmx-bootinfo.h:321:20: note: expanded from macro 'ENUM_BRD_TYPE_CASE'
case x: return(#x + 16); /* Skip CVMX_BOARD_TYPE_ */
~~~^~~~
cvmx-bootinfo.h:326:3: note: use array indexing to silence this warning
cvmx-bootinfo.h:321:20: note: expanded from macro 'ENUM_BRD_TYPE_CASE'
case x: return(#x + 16); /* Skip CVMX_BOARD_TYPE_ */
^
Follow the prompts to use the address operator '&' to fix this error.
Signed-off-by: Tianjia Zhang <[email protected]>
Reviewed-by: Nathan Chancellor <[email protected]>
Reviewed-by: Philippe Mathieu-Daudé <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/mips/include/asm/octeon/cvmx-bootinfo.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/mips/include/asm/octeon/cvmx-bootinfo.h b/arch/mips/include/asm/octeon/cvmx-bootinfo.h
index c114a7ba0badd..e77e8b7c00838 100644
--- a/arch/mips/include/asm/octeon/cvmx-bootinfo.h
+++ b/arch/mips/include/asm/octeon/cvmx-bootinfo.h
@@ -317,7 +317,7 @@ enum cvmx_chip_types_enum {
/* Functions to return string based on type */
#define ENUM_BRD_TYPE_CASE(x) \
- case x: return(#x + 16); /* Skip CVMX_BOARD_TYPE_ */
+ case x: return (&#x[16]); /* Skip CVMX_BOARD_TYPE_ */
static inline const char *cvmx_board_type_to_string(enum
cvmx_board_types_enum type)
{
@@ -408,7 +408,7 @@ static inline const char *cvmx_board_type_to_string(enum
}
#define ENUM_CHIP_TYPE_CASE(x) \
- case x: return(#x + 15); /* Skip CVMX_CHIP_TYPE */
+ case x: return (&#x[15]); /* Skip CVMX_CHIP_TYPE */
static inline const char *cvmx_chip_type_to_string(enum
cvmx_chip_types_enum type)
{
--
2.34.1
From: Michael S. Tsirkin <[email protected]>
commit 1861ba626ae9b98136f3e504208cdef6b29cd3ec upstream.
A recently added error path does not mark ring unused when exiting on
OOM, which will lead to BUG on the next entry in debug builds.
TODO: refactor code so we have START_USE and END_USE in the same function.
Fixes: fc6d70f40b3d ("virtio_ring: check desc == NULL when using indirect with packed")
Cc: "Xuan Zhuo" <[email protected]>
Cc: Jiasheng Jiang <[email protected]>
Reviewed-by: Xuan Zhuo <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/virtio/virtio_ring.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/virtio/virtio_ring.c
+++ b/drivers/virtio/virtio_ring.c
@@ -1124,8 +1124,10 @@ static inline int virtqueue_add_packed(s
if (virtqueue_use_indirect(_vq, total_sg)) {
err = virtqueue_add_indirect_packed(vq, sgs, total_sg, out_sgs,
in_sgs, data, gfp);
- if (err != -ENOMEM)
+ if (err != -ENOMEM) {
+ END_USE(vq);
return err;
+ }
/* fall back on direct */
}
From: Andrey Konovalov <[email protected]>
commit e073e5ef90298d2d6e5e7f04b545a0815e92110c upstream.
Make do_kmem_cache_size_bulk() destroy the cache it creates.
Link: https://lkml.kernel.org/r/aced20a94bf04159a139f0846e41d38a1537debb.1640018297.git.andreyknvl@google.com
Fixes: 03a9349ac0e0 ("lib/test_meminit: add a kmem_cache_alloc_bulk() test")
Signed-off-by: Andrey Konovalov <[email protected]>
Reviewed-by: Marco Elver <[email protected]>
Cc: Alexander Potapenko <[email protected]>
Cc: Dmitry Vyukov <[email protected]>
Cc: Andrey Ryabinin <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
lib/test_meminit.c | 1 +
1 file changed, 1 insertion(+)
--- a/lib/test_meminit.c
+++ b/lib/test_meminit.c
@@ -337,6 +337,7 @@ static int __init do_kmem_cache_size_bul
if (num)
kmem_cache_free_bulk(c, num, objects);
}
+ kmem_cache_destroy(c);
*total_failures += fail;
return 1;
}
From: Doyle, Patrick <[email protected]>
commit fd0d8d85f7230052e638a56d1bfea170c488e6bc upstream.
In the unlikely event that both blocks 10 and 11 are marked as bad (on a
32 bit machine), then the process of marking block 10 as bad stomps on
cached entry for block 11. There are (of course) other examples.
Signed-off-by: Patrick Doyle <[email protected]>
Reviewed-by: Richard Weinberger <[email protected]>
Signed-off-by: Yoshio Furuyama <[email protected]>
[<[email protected]>: Fixed the title]
Signed-off-by: Miquel Raynal <[email protected]>
Cc: Frieder Schrempf <[email protected]>
Link: https://lore.kernel.org/linux-mtd/774a92693f311e7de01e5935e720a179fb1b2468.1616635406.git.ytc-mb-yfuruyama7@kioxia.com
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mtd/nand/bbt.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/mtd/nand/bbt.c
+++ b/drivers/mtd/nand/bbt.c
@@ -123,7 +123,7 @@ int nanddev_bbt_set_block_status(struct
unsigned int rbits = bits_per_block + offs - BITS_PER_LONG;
pos[1] &= ~GENMASK(rbits - 1, 0);
- pos[1] |= val >> rbits;
+ pos[1] |= val >> (bits_per_block - rbits);
}
return 0;
From: Eric Dumazet <[email protected]>
commit 91341fa0003befd097e190ec2a4bf63ad957c49a upstream.
Both fields can be read/written without synchronization,
add proper accessors and documentation.
Fixes: d5dd88794a13 ("inet: fix various use-after-free in defrags units")
Signed-off-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/net/inet_frag.h | 11 +++++++++--
include/net/ipv6_frag.h | 3 ++-
net/ipv4/inet_fragment.c | 8 +++++---
net/ipv4/ip_fragment.c | 3 ++-
4 files changed, 18 insertions(+), 7 deletions(-)
--- a/include/net/inet_frag.h
+++ b/include/net/inet_frag.h
@@ -116,8 +116,15 @@ int fqdir_init(struct fqdir **fqdirp, st
static inline void fqdir_pre_exit(struct fqdir *fqdir)
{
- fqdir->high_thresh = 0; /* prevent creation of new frags */
- fqdir->dead = true;
+ /* Prevent creation of new frags.
+ * Pairs with READ_ONCE() in inet_frag_find().
+ */
+ WRITE_ONCE(fqdir->high_thresh, 0);
+
+ /* Pairs with READ_ONCE() in inet_frag_kill(), ip_expire()
+ * and ip6frag_expire_frag_queue().
+ */
+ WRITE_ONCE(fqdir->dead, true);
}
void fqdir_exit(struct fqdir *fqdir);
--- a/include/net/ipv6_frag.h
+++ b/include/net/ipv6_frag.h
@@ -67,7 +67,8 @@ ip6frag_expire_frag_queue(struct net *ne
struct sk_buff *head;
rcu_read_lock();
- if (fq->q.fqdir->dead)
+ /* Paired with the WRITE_ONCE() in fqdir_pre_exit(). */
+ if (READ_ONCE(fq->q.fqdir->dead))
goto out_rcu_unlock;
spin_lock(&fq->q.lock);
--- a/net/ipv4/inet_fragment.c
+++ b/net/ipv4/inet_fragment.c
@@ -204,9 +204,9 @@ void inet_frag_kill(struct inet_frag_que
/* The RCU read lock provides a memory barrier
* guaranteeing that if fqdir->dead is false then
* the hash table destruction will not start until
- * after we unlock. Paired with inet_frags_exit_net().
+ * after we unlock. Paired with fqdir_pre_exit().
*/
- if (!fqdir->dead) {
+ if (!READ_ONCE(fqdir->dead)) {
rhashtable_remove_fast(&fqdir->rhashtable, &fq->node,
fqdir->f->rhash_params);
refcount_dec(&fq->refcnt);
@@ -321,9 +321,11 @@ static struct inet_frag_queue *inet_frag
/* TODO : call from rcu_read_lock() and no longer use refcount_inc_not_zero() */
struct inet_frag_queue *inet_frag_find(struct fqdir *fqdir, void *key)
{
+ /* This pairs with WRITE_ONCE() in fqdir_pre_exit(). */
+ long high_thresh = READ_ONCE(fqdir->high_thresh);
struct inet_frag_queue *fq = NULL, *prev;
- if (!fqdir->high_thresh || frag_mem_limit(fqdir) > fqdir->high_thresh)
+ if (!high_thresh || frag_mem_limit(fqdir) > high_thresh)
return NULL;
rcu_read_lock();
--- a/net/ipv4/ip_fragment.c
+++ b/net/ipv4/ip_fragment.c
@@ -144,7 +144,8 @@ static void ip_expire(struct timer_list
rcu_read_lock();
- if (qp->q.fqdir->dead)
+ /* Paired with WRITE_ONCE() in fqdir_pre_exit(). */
+ if (READ_ONCE(qp->q.fqdir->dead))
goto out_rcu_unlock;
spin_lock(&qp->q.lock);
From: Eli Cohen <[email protected]>
commit 97143b70aa847f2b0a1f959dde126b76ff7b5376 upstream.
Remove overriding of virtio_version_1_0 which forced the virtqueue
object to version 1.
Fixes: 1a86b377aa21 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices")
Signed-off-by: Eli Cohen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Michael S. Tsirkin <[email protected]>
Reviewed-by: Parav Pandit <[email protected]>
Acked-by: Jason Wang <[email protected]>
Reviewed-by: Si-Wei Liu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/vdpa/mlx5/net/mlx5_vnet.c | 2 --
1 file changed, 2 deletions(-)
--- a/drivers/vdpa/mlx5/net/mlx5_vnet.c
+++ b/drivers/vdpa/mlx5/net/mlx5_vnet.c
@@ -812,8 +812,6 @@ static int create_virtqueue(struct mlx5_
MLX5_SET(virtio_q, vq_ctx, umem_3_id, mvq->umem3.id);
MLX5_SET(virtio_q, vq_ctx, umem_3_size, mvq->umem3.size);
MLX5_SET(virtio_q, vq_ctx, pd, ndev->mvdev.res.pdn);
- if (MLX5_CAP_DEV_VDPA_EMULATION(ndev->mvdev.mdev, eth_frame_offload_type))
- MLX5_SET(virtio_q, vq_ctx, virtio_version_1_0, 1);
err = mlx5_cmd_exec(ndev->mvdev.mdev, in, inlen, out, sizeof(out));
if (err)
From: Guillaume Nault <[email protected]>
commit f7716b318568b22fbf0e3be99279a979e217cf71 upstream.
Mask the ECN bits before initialising ->flowi4_tos. The tunnel key may
have the last ECN bit set, which will interfere with the route lookup
process as ip_route_output_key_hash() interpretes this bit specially
(to restrict the route scope).
Found by code inspection, compile tested only.
Fixes: 962924fa2b7a ("ip_gre: Refactor collect metatdata mode tunnel xmit to ip_md_tunnel_xmit")
Signed-off-by: Guillaume Nault <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv4/ip_gre.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/net/ipv4/ip_gre.c
+++ b/net/ipv4/ip_gre.c
@@ -599,8 +599,9 @@ static int gre_fill_metadata_dst(struct
key = &info->key;
ip_tunnel_init_flow(&fl4, IPPROTO_GRE, key->u.ipv4.dst, key->u.ipv4.src,
- tunnel_id_to_key32(key->tun_id), key->tos, 0,
- skb->mark, skb_get_hash(skb));
+ tunnel_id_to_key32(key->tun_id),
+ key->tos & ~INET_ECN_MASK, 0, skb->mark,
+ skb_get_hash(skb));
rt = ip_route_output_key(dev_net(dev), &fl4);
if (IS_ERR(rt))
return PTR_ERR(rt);
From: Guillaume Nault <[email protected]>
commit 23e7b1bfed61e301853b5e35472820d919498278 upstream.
Similar to commit 94e2238969e8 ("xfrm4: strip ECN bits from tos field"),
clear the ECN bits from iph->tos when setting ->flowi4_tos.
This ensures that the last bit of ->flowi4_tos is cleared, so
ip_route_output_key_hash() isn't going to restrict the scope of the
route lookup.
Use ~INET_ECN_MASK instead of IPTOS_RT_MASK, because we have no reason
to clear the high order bits.
Found by code inspection, compile tested only.
Fixes: 4da3089f2b58 ("[IPSEC]: Use TOS when doing tunnel lookups")
Signed-off-by: Guillaume Nault <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/xfrm/xfrm_policy.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/net/xfrm/xfrm_policy.c
+++ b/net/xfrm/xfrm_policy.c
@@ -31,6 +31,7 @@
#include <linux/if_tunnel.h>
#include <net/dst.h>
#include <net/flow.h>
+#include <net/inet_ecn.h>
#include <net/xfrm.h>
#include <net/ip.h>
#include <net/gre.h>
@@ -3294,7 +3295,7 @@ decode_session4(struct sk_buff *skb, str
fl4->flowi4_proto = iph->protocol;
fl4->daddr = reverse ? iph->saddr : iph->daddr;
fl4->saddr = reverse ? iph->daddr : iph->saddr;
- fl4->flowi4_tos = iph->tos;
+ fl4->flowi4_tos = iph->tos & ~INET_ECN_MASK;
if (!ip_is_fragment(iph)) {
switch (iph->protocol) {
From: Eric Dumazet <[email protected]>
commit 2836615aa22de55b8fca5e32fe1b27a67cda625e upstream.
When under stress, cleanup_net() can have to dismantle
netns in big numbers. ops_exit_list() currently calls
many helpers [1] that have no schedule point, and we can
end up with soft lockups, particularly on hosts
with many cpus.
Even for moderate amount of netns processed by cleanup_net()
this patch avoids latency spikes.
[1] Some of these helpers like fib_sync_up() and fib_sync_down_dev()
are very slow because net/ipv4/fib_semantics.c uses host-wide hash tables,
and ifindex is used as the only input of two hash functions.
ifindexes tend to be the same for all netns (lo.ifindex==1 per instance)
This will be fixed in a separate patch.
Fixes: 72ad937abd0a ("net: Add support for batching network namespace cleanups")
Signed-off-by: Eric Dumazet <[email protected]>
Cc: Eric W. Biederman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/core/net_namespace.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/net/core/net_namespace.c
+++ b/net/core/net_namespace.c
@@ -183,8 +183,10 @@ static void ops_exit_list(const struct p
{
struct net *net;
if (ops->exit) {
- list_for_each_entry(net, net_exit_list, exit_list)
+ list_for_each_entry(net, net_exit_list, exit_list) {
ops->exit(net);
+ cond_resched();
+ }
}
if (ops->exit_batch)
ops->exit_batch(net_exit_list);
From: Fabio Estevam <[email protected]>
commit 09b8cd69edcf2be04a781e1781e98e52a775c9ad upstream.
On an imx6dl-pico-pi board with a QCA9377 SDIO chip, simply trying to
connect via ssh to another machine causes:
[ 55.824159] ath10k_sdio mmc1:0001:1: failed to transmit packet, dropping: -12
[ 55.832169] ath10k_sdio mmc1:0001:1: failed to submit frame: -12
[ 55.838529] ath10k_sdio mmc1:0001:1: failed to push frame: -12
[ 55.905863] ath10k_sdio mmc1:0001:1: failed to transmit packet, dropping: -12
[ 55.913650] ath10k_sdio mmc1:0001:1: failed to submit frame: -12
[ 55.919887] ath10k_sdio mmc1:0001:1: failed to push frame: -12
, leading to an ssh connection failure.
One user inspected the size of frames on Wireshark and reported
the followig:
"I was able to narrow the issue down to the mtu. If I set the mtu for
the wlan0 device to 1486 instead of 1500, the issue does not happen.
The size of frames that I see on Wireshark is exactly 1500 after
setting it to 1486."
Clearing the HI_ACS_FLAGS_ALT_DATA_CREDIT_SIZE avoids the problem and
the ssh command works successfully after that.
Introduce a 'credit_size_workaround' field to ath10k_hw_params for
the QCA9377 SDIO, so that the HI_ACS_FLAGS_ALT_DATA_CREDIT_SIZE
is not set in this case.
Tested with QCA9377 SDIO with firmware WLAN.TF.1.1.1-00061-QCATFSWPZ-1.
Fixes: 2f918ea98606 ("ath10k: enable alt data of TX path for sdio")
Signed-off-by: Fabio Estevam <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/ath/ath10k/core.c | 19 ++++++++++++++++++-
drivers/net/wireless/ath/ath10k/hw.h | 3 +++
2 files changed, 21 insertions(+), 1 deletion(-)
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -89,6 +89,7 @@ static const struct ath10k_hw_params ath
.rri_on_ddr = false,
.hw_filter_reset_required = true,
.fw_diag_ce_download = false,
+ .credit_size_workaround = false,
.tx_stats_over_pktlog = true,
},
{
@@ -123,6 +124,7 @@ static const struct ath10k_hw_params ath
.rri_on_ddr = false,
.hw_filter_reset_required = true,
.fw_diag_ce_download = false,
+ .credit_size_workaround = false,
.tx_stats_over_pktlog = true,
},
{
@@ -158,6 +160,7 @@ static const struct ath10k_hw_params ath
.rri_on_ddr = false,
.hw_filter_reset_required = true,
.fw_diag_ce_download = false,
+ .credit_size_workaround = false,
.tx_stats_over_pktlog = false,
},
{
@@ -187,6 +190,7 @@ static const struct ath10k_hw_params ath
.num_wds_entries = 0x20,
.uart_pin_workaround = true,
.tx_stats_over_pktlog = false,
+ .credit_size_workaround = false,
.bmi_large_size_download = true,
.supports_peer_stats_info = true,
},
@@ -222,6 +226,7 @@ static const struct ath10k_hw_params ath
.rri_on_ddr = false,
.hw_filter_reset_required = true,
.fw_diag_ce_download = false,
+ .credit_size_workaround = false,
.tx_stats_over_pktlog = false,
},
{
@@ -256,6 +261,7 @@ static const struct ath10k_hw_params ath
.rri_on_ddr = false,
.hw_filter_reset_required = true,
.fw_diag_ce_download = false,
+ .credit_size_workaround = false,
.tx_stats_over_pktlog = false,
},
{
@@ -290,6 +296,7 @@ static const struct ath10k_hw_params ath
.rri_on_ddr = false,
.hw_filter_reset_required = true,
.fw_diag_ce_download = false,
+ .credit_size_workaround = false,
.tx_stats_over_pktlog = false,
},
{
@@ -327,6 +334,7 @@ static const struct ath10k_hw_params ath
.rri_on_ddr = false,
.hw_filter_reset_required = true,
.fw_diag_ce_download = true,
+ .credit_size_workaround = false,
.tx_stats_over_pktlog = false,
.supports_peer_stats_info = true,
},
@@ -368,6 +376,7 @@ static const struct ath10k_hw_params ath
.rri_on_ddr = false,
.hw_filter_reset_required = true,
.fw_diag_ce_download = false,
+ .credit_size_workaround = false,
.tx_stats_over_pktlog = false,
},
{
@@ -415,6 +424,7 @@ static const struct ath10k_hw_params ath
.rri_on_ddr = false,
.hw_filter_reset_required = true,
.fw_diag_ce_download = false,
+ .credit_size_workaround = false,
.tx_stats_over_pktlog = false,
},
{
@@ -459,6 +469,7 @@ static const struct ath10k_hw_params ath
.rri_on_ddr = false,
.hw_filter_reset_required = true,
.fw_diag_ce_download = false,
+ .credit_size_workaround = false,
.tx_stats_over_pktlog = false,
},
{
@@ -493,6 +504,7 @@ static const struct ath10k_hw_params ath
.rri_on_ddr = false,
.hw_filter_reset_required = true,
.fw_diag_ce_download = false,
+ .credit_size_workaround = false,
.tx_stats_over_pktlog = false,
},
{
@@ -529,6 +541,7 @@ static const struct ath10k_hw_params ath
.rri_on_ddr = false,
.hw_filter_reset_required = true,
.fw_diag_ce_download = true,
+ .credit_size_workaround = false,
.tx_stats_over_pktlog = false,
},
{
@@ -557,6 +570,7 @@ static const struct ath10k_hw_params ath
.ast_skid_limit = 0x10,
.num_wds_entries = 0x20,
.uart_pin_workaround = true,
+ .credit_size_workaround = true,
},
{
.id = QCA4019_HW_1_0_DEV_VERSION,
@@ -597,6 +611,7 @@ static const struct ath10k_hw_params ath
.rri_on_ddr = false,
.hw_filter_reset_required = true,
.fw_diag_ce_download = false,
+ .credit_size_workaround = false,
.tx_stats_over_pktlog = false,
},
{
@@ -624,6 +639,7 @@ static const struct ath10k_hw_params ath
.rri_on_ddr = true,
.hw_filter_reset_required = false,
.fw_diag_ce_download = false,
+ .credit_size_workaround = false,
.tx_stats_over_pktlog = false,
},
};
@@ -697,6 +713,7 @@ static void ath10k_send_suspend_complete
static int ath10k_init_sdio(struct ath10k *ar, enum ath10k_firmware_mode mode)
{
+ bool mtu_workaround = ar->hw_params.credit_size_workaround;
int ret;
u32 param = 0;
@@ -714,7 +731,7 @@ static int ath10k_init_sdio(struct ath10
param |= HI_ACS_FLAGS_SDIO_REDUCE_TX_COMPL_SET;
- if (mode == ATH10K_FIRMWARE_MODE_NORMAL)
+ if (mode == ATH10K_FIRMWARE_MODE_NORMAL && !mtu_workaround)
param |= HI_ACS_FLAGS_ALT_DATA_CREDIT_SIZE;
else
param &= ~HI_ACS_FLAGS_ALT_DATA_CREDIT_SIZE;
--- a/drivers/net/wireless/ath/ath10k/hw.h
+++ b/drivers/net/wireless/ath/ath10k/hw.h
@@ -618,6 +618,9 @@ struct ath10k_hw_params {
*/
bool uart_pin_workaround;
+ /* Workaround for the credit size calculation */
+ bool credit_size_workaround;
+
/* tx stats support over pktlog */
bool tx_stats_over_pktlog;
From: Tom Rix <[email protected]>
commit baa59504c1cd0cca7d41954a45ee0b3dc78e41a0 upstream.
Clang static analysis reports this issue
ocelot_flower.c:563:8: warning: 1st function call argument
is an uninitialized value
!is_zero_ether_addr(match.mask->dst)) {
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The variable match is used before it is set. So move the
block.
Fixes: 75944fda1dfe ("net: mscc: ocelot: offload ingress skbedit and vlan actions to VCAP IS1")
Signed-off-by: Tom Rix <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/mscc/ocelot_flower.c | 15 ++++++++-------
1 file changed, 8 insertions(+), 7 deletions(-)
--- a/drivers/net/ethernet/mscc/ocelot_flower.c
+++ b/drivers/net/ethernet/mscc/ocelot_flower.c
@@ -462,13 +462,6 @@ ocelot_flower_parse_key(struct ocelot *o
return -EOPNOTSUPP;
}
- if (filter->block_id == VCAP_IS1 &&
- !is_zero_ether_addr(match.mask->dst)) {
- NL_SET_ERR_MSG_MOD(extack,
- "Key type S1_NORMAL cannot match on destination MAC");
- return -EOPNOTSUPP;
- }
-
/* The hw support mac matches only for MAC_ETYPE key,
* therefore if other matches(port, tcp flags, etc) are added
* then just bail out
@@ -483,6 +476,14 @@ ocelot_flower_parse_key(struct ocelot *o
return -EOPNOTSUPP;
flow_rule_match_eth_addrs(rule, &match);
+
+ if (filter->block_id == VCAP_IS1 &&
+ !is_zero_ether_addr(match.mask->dst)) {
+ NL_SET_ERR_MSG_MOD(extack,
+ "Key type S1_NORMAL cannot match on destination MAC");
+ return -EOPNOTSUPP;
+ }
+
filter->key_type = OCELOT_VCAP_KEY_ETYPE;
ether_addr_copy(filter->key.etype.dmac.value,
match.key->dst);
From: Eric W. Biederman <[email protected]>
commit 1b5a42d9c85f0e731f01c8d1129001fd8531a8a0 upstream.
In the function bacct_add_task the code reading task->exit_code was
introduced in commit f3cef7a99469 ("[PATCH] csa: basic accounting over
taskstats"), and it is not entirely clear what the taskstats interface
is trying to return as only returning the exit_code of the first task
in a process doesn't make a lot of sense.
As best as I can figure the intent is to return task->exit_code after
a task exits. The field is returned with per task fields, so the
exit_code of the entire process is not wanted. Only the value of the
first task is returned so this is not a useful way to get the per task
ptrace stop code. The ordinary case of returning this value is
returning after a task exits, which also precludes use for getting
a ptrace value.
It is common to for the first task of a process to also be the last
task of a process so this field may have done something reasonable by
accident in testing.
Make ac_exitcode a reliable per task value by always returning it for
every exited task.
Setting ac_exitcode in a sensible mannter makes it possible to continue
to provide this value going forward.
Cc: Balbir Singh <[email protected]>
Fixes: f3cef7a99469 ("[PATCH] csa: basic accounting over taskstats")
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: "Eric W. Biederman" <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/tsacct.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
--- a/kernel/tsacct.c
+++ b/kernel/tsacct.c
@@ -38,11 +38,10 @@ void bacct_add_tsk(struct user_namespace
stats->ac_btime = clamp_t(time64_t, btime, 0, U32_MAX);
stats->ac_btime64 = btime;
- if (thread_group_leader(tsk)) {
+ if (tsk->flags & PF_EXITING)
stats->ac_exitcode = tsk->exit_code;
- if (tsk->flags & PF_FORKNOEXEC)
- stats->ac_flag |= AFORK;
- }
+ if (thread_group_leader(tsk) && (tsk->flags & PF_FORKNOEXEC))
+ stats->ac_flag |= AFORK;
if (tsk->flags & PF_SUPERPRIV)
stats->ac_flag |= ASU;
if (tsk->flags & PF_DUMPCORE)
From: Kevin Bracey <[email protected]>
commit fb80445c438c78b40b547d12b8d56596ce4ccfeb upstream.
commit 56b765b79e9a ("htb: improved accuracy at high rates") broke
"overhead X", "linklayer atm" and "mpu X" attributes.
"overhead X" and "linklayer atm" have already been fixed. This restores
the "mpu X" handling, as might be used by DOCSIS or Ethernet shaping:
tc class add ... htb rate X overhead 4 mpu 64
The code being fixed is used by htb, tbf and act_police. Cake has its
own mpu handling. qdisc_calculate_pkt_len still uses the size table
containing values adjusted for mpu by user space.
iproute2 tc has always passed mpu into the kernel via a tc_ratespec
structure, but the kernel never directly acted on it, merely stored it
so that it could be read back by `tc class show`.
Rather, tc would generate length-to-time tables that included the mpu
(and linklayer) in their construction, and the kernel used those tables.
Since v3.7, the tables were no longer used. Along with "mpu", this also
broke "overhead" and "linklayer" which were fixed in 01cb71d2d47b
("net_sched: restore "overhead xxx" handling", v3.10) and 8a8e3d84b171
("net_sched: restore "linklayer atm" handling", v3.11).
"overhead" was fixed by simply restoring use of tc_ratespec::overhead -
this had originally been used by the kernel but was initially omitted
from the new non-table-based calculations.
"linklayer" had been handled in the table like "mpu", but the mode was
not originally passed in tc_ratespec. The new implementation was made to
handle it by getting new versions of tc to pass the mode in an extended
tc_ratespec, and for older versions of tc the table contents were analysed
at load time to deduce linklayer.
As "mpu" has always been given to the kernel in tc_ratespec,
accompanying the mpu-based table, we can restore system functionality
with no userspace change by making the kernel act on the tc_ratespec
value.
Fixes: 56b765b79e9a ("htb: improved accuracy at high rates")
Signed-off-by: Kevin Bracey <[email protected]>
Cc: Eric Dumazet <[email protected]>
Cc: Jiri Pirko <[email protected]>
Cc: Vimalkumar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/net/sch_generic.h | 5 +++++
net/sched/sch_generic.c | 1 +
2 files changed, 6 insertions(+)
--- a/include/net/sch_generic.h
+++ b/include/net/sch_generic.h
@@ -1261,6 +1261,7 @@ struct psched_ratecfg {
u64 rate_bytes_ps; /* bytes per second */
u32 mult;
u16 overhead;
+ u16 mpu;
u8 linklayer;
u8 shift;
};
@@ -1270,6 +1271,9 @@ static inline u64 psched_l2t_ns(const st
{
len += r->overhead;
+ if (len < r->mpu)
+ len = r->mpu;
+
if (unlikely(r->linklayer == TC_LINKLAYER_ATM))
return ((u64)(DIV_ROUND_UP(len,48)*53) * r->mult) >> r->shift;
@@ -1292,6 +1296,7 @@ static inline void psched_ratecfg_getrat
res->rate = min_t(u64, r->rate_bytes_ps, ~0U);
res->overhead = r->overhead;
+ res->mpu = r->mpu;
res->linklayer = (r->linklayer & TC_LINKLAYER_MASK);
}
--- a/net/sched/sch_generic.c
+++ b/net/sched/sch_generic.c
@@ -1386,6 +1386,7 @@ void psched_ratecfg_precompute(struct ps
{
memset(r, 0, sizeof(*r));
r->overhead = conf->overhead;
+ r->mpu = conf->mpu;
r->rate_bytes_ps = max_t(u64, conf->rate, rate64);
r->linklayer = (conf->linklayer & TC_LINKLAYER_MASK);
r->mult = 1;
From: Laurence de Bruxelles <[email protected]>
commit 34127b3632b21e5c391756e724b1198eb9917981 upstream.
With the latest stable kernel versions the rtc on the PXA based
Zaurus does not work, when booting I see the following kernel messages:
pxa-rtc pxa-rtc: failed to find rtc clock source
pxa-rtc pxa-rtc: Unable to init SA1100 RTC sub-device
pxa-rtc: probe of pxa-rtc failed with error -2
hctosys: unable to open rtc device (rtc0)
I think this is because commit f2997775b111 ("rtc: sa1100: fix possible
race condition") moved the allocation of the rtc_device struct out of
sa1100_rtc_init and into sa1100_rtc_probe. This means that pxa_rtc_probe
also needs to do allocation for the rtc_device struct, otherwise
sa1100_rtc_init will try to dereference a null pointer. This patch adds
that allocation by copying how sa1100_rtc_probe in
drivers/rtc/rtc-sa1100.c does it; after the IRQs are set up a managed
rtc_device is allocated.
I've tested this patch with `qemu-system-arm -machine akita` and with a
real Zaurus SL-C1000 applied to 4.19, 5.4, and 5.10.
Signed-off-by: Laurence de Bruxelles <[email protected]>
Fixes: f2997775b111 ("rtc: sa1100: fix possible race condition")
Signed-off-by: Alexandre Belloni <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/rtc/rtc-pxa.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/rtc/rtc-pxa.c
+++ b/drivers/rtc/rtc-pxa.c
@@ -330,6 +330,10 @@ static int __init pxa_rtc_probe(struct p
if (sa1100_rtc->irq_alarm < 0)
return -ENXIO;
+ sa1100_rtc->rtc = devm_rtc_allocate_device(&pdev->dev);
+ if (IS_ERR(sa1100_rtc->rtc))
+ return PTR_ERR(sa1100_rtc->rtc);
+
pxa_rtc->base = devm_ioremap(dev, pxa_rtc->ress->start,
resource_size(pxa_rtc->ress));
if (!pxa_rtc->base) {
From: Dmitry Torokhov <[email protected]>
commit 3fe6acd4dc922237b30e55473c9349c6ce0690f3 upstream.
Unfortunately details of USB HID transport bled into HID core and
handling of numbered/unnumbered reports is quite a mess, with
hid_report_len() calculating the length according to USB rules,
and hid_hw_raw_request() adding report ID to the buffer for both
numbered and unnumbered reports.
Untangling it all requres a lot of changes in HID, so for now let's
handle this in the driver.
[[email protected]: microoptimize field->report->id to report->id]
Fixes: 14c9c014babe ("HID: add vivaldi HID driver")
Signed-off-by: Dmitry Torokhov <[email protected]>
Tested-by: Stephen Boyd <[email protected]> # CoachZ
Signed-off-by: Jiri Kosina <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/hid/hid-vivaldi.c | 34 ++++++++++++++++++++++++++++------
1 file changed, 28 insertions(+), 6 deletions(-)
--- a/drivers/hid/hid-vivaldi.c
+++ b/drivers/hid/hid-vivaldi.c
@@ -74,10 +74,11 @@ static void vivaldi_feature_mapping(stru
struct hid_usage *usage)
{
struct vivaldi_data *drvdata = hid_get_drvdata(hdev);
+ struct hid_report *report = field->report;
int fn_key;
int ret;
u32 report_len;
- u8 *buf;
+ u8 *report_data, *buf;
if (field->logical != HID_USAGE_FN_ROW_PHYSMAP ||
(usage->hid & HID_USAGE_PAGE) != HID_UP_ORDINAL)
@@ -89,12 +90,24 @@ static void vivaldi_feature_mapping(stru
if (fn_key > drvdata->max_function_row_key)
drvdata->max_function_row_key = fn_key;
- buf = hid_alloc_report_buf(field->report, GFP_KERNEL);
- if (!buf)
+ report_data = buf = hid_alloc_report_buf(report, GFP_KERNEL);
+ if (!report_data)
return;
- report_len = hid_report_len(field->report);
- ret = hid_hw_raw_request(hdev, field->report->id, buf,
+ report_len = hid_report_len(report);
+ if (!report->id) {
+ /*
+ * hid_hw_raw_request() will stuff report ID (which will be 0)
+ * into the first byte of the buffer even for unnumbered
+ * reports, so we need to account for this to avoid getting
+ * -EOVERFLOW in return.
+ * Note that hid_alloc_report_buf() adds 7 bytes to the size
+ * so we can safely say that we have space for an extra byte.
+ */
+ report_len++;
+ }
+
+ ret = hid_hw_raw_request(hdev, report->id, report_data,
report_len, HID_FEATURE_REPORT,
HID_REQ_GET_REPORT);
if (ret < 0) {
@@ -103,7 +116,16 @@ static void vivaldi_feature_mapping(stru
goto out;
}
- ret = hid_report_raw_event(hdev, HID_FEATURE_REPORT, buf,
+ if (!report->id) {
+ /*
+ * Undo the damage from hid_hw_raw_request() for unnumbered
+ * reports.
+ */
+ report_data++;
+ report_len--;
+ }
+
+ ret = hid_report_raw_event(hdev, HID_FEATURE_REPORT, report_data,
report_len, 0);
if (ret) {
dev_warn(&hdev->dev, "failed to report feature %d\n",
From: Alexander Stein <[email protected]>
commit 640f35b871d29cd685ce0ea0762636381beeb98a upstream.
This property was already mentioned in the old textual bindings
amlogic,meson-vpu.txt, but got dropped during conversion.
Adding it back similar to amlogic,gx-vdec.yaml.
Fixes: 6b9ebf1e0e67 ("dt-bindings: display: amlogic, meson-vpu: convert to yaml")
Signed-off-by: Alexander Stein <[email protected]>
Acked-by: Rob Herring <[email protected]>
Reviewed-by: Neil Armstrong <[email protected]>
Reviewed-by: Martin Blumenstingl <[email protected]>
Signed-off-by: Neil Armstrong <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml | 6 ++++++
1 file changed, 6 insertions(+)
--- a/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml
+++ b/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml
@@ -78,6 +78,10 @@ properties:
interrupts:
maxItems: 1
+ amlogic,canvas:
+ description: should point to a canvas provider node
+ $ref: /schemas/types.yaml#/definitions/phandle
+
power-domains:
maxItems: 1
description: phandle to the associated power domain
@@ -106,6 +110,7 @@ required:
- port@1
- "#address-cells"
- "#size-cells"
+ - amlogic,canvas
additionalProperties: false
@@ -118,6 +123,7 @@ examples:
interrupts = <3>;
#address-cells = <1>;
#size-cells = <0>;
+ amlogic,canvas = <&canvas>;
/* CVBS VDAC output port */
port@0 {
From: Robert Hancock <[email protected]>
commit aba57a823d2985a2cc8c74a2535f3a88e68d9424 upstream.
The check for the number of available TX ring slots was off by 1 since a
slot is required for the skb header as well as each fragment. This could
result in overwriting a TX ring slot that was still in use.
Fixes: 8a3b7a252dca9 ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Robert Hancock <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -747,7 +747,7 @@ axienet_start_xmit(struct sk_buff *skb,
num_frag = skb_shinfo(skb)->nr_frags;
cur_p = &lp->tx_bd_v[lp->tx_bd_tail];
- if (axienet_check_tx_bd_space(lp, num_frag)) {
+ if (axienet_check_tx_bd_space(lp, num_frag + 1)) {
if (netif_queue_stopped(ndev))
return NETDEV_TX_BUSY;
@@ -757,7 +757,7 @@ axienet_start_xmit(struct sk_buff *skb,
smp_mb();
/* Space might have just been freed - check again */
- if (axienet_check_tx_bd_space(lp, num_frag))
+ if (axienet_check_tx_bd_space(lp, num_frag + 1))
return NETDEV_TX_BUSY;
netif_wake_queue(ndev);
From: Alexander Stein <[email protected]>
commit 22bf4047d26980807611b7e2030803db375afd87 upstream.
This is used in meson-gx and meson-g12. Add the property to the binding.
This fixes the dtschema warning:
hdmi-tx@c883a000: 'sound-name-prefix' does not match any of the
regexes: 'pinctrl-[0-9]+'
Signed-off-by: Alexander Stein <[email protected]>
Fixes: 376bf52deef5 ("dt-bindings: display: amlogic, meson-dw-hdmi: convert to yaml")
Acked-by: Neil Armstrong <[email protected]>
Signed-off-by: Neil Armstrong <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml | 5 +++++
1 file changed, 5 insertions(+)
--- a/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml
@@ -10,6 +10,9 @@ title: Amlogic specific extensions to th
maintainers:
- Neil Armstrong <[email protected]>
+allOf:
+ - $ref: /schemas/sound/name-prefix.yaml#
+
description: |
The Amlogic Meson Synopsys Designware Integration is composed of
- A Synopsys DesignWare HDMI Controller IP
@@ -99,6 +102,8 @@ properties:
"#sound-dai-cells":
const: 0
+ sound-name-prefix: true
+
required:
- compatible
- reg
From: Sam Protsenko <[email protected]>
commit 33950f9a36aca55c2b1e6062d9b29f3e97f91c40 upstream.
Exynos7 watchdog driver is clearly indicating that its dts node must
define syscon phandle property. That was probably forgotten, so add it.
Signed-off-by: Sam Protsenko <[email protected]>
Fixes: 2b9366b66967 ("watchdog: s3c2410_wdt: Add support for Watchdog device on Exynos7")
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Wim Van Sebroeck <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
Documentation/devicetree/bindings/watchdog/samsung-wdt.yaml | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/Documentation/devicetree/bindings/watchdog/samsung-wdt.yaml
+++ b/Documentation/devicetree/bindings/watchdog/samsung-wdt.yaml
@@ -39,8 +39,8 @@ properties:
samsung,syscon-phandle:
$ref: /schemas/types.yaml#/definitions/phandle
description:
- Phandle to the PMU system controller node (in case of Exynos5250
- and Exynos5420).
+ Phandle to the PMU system controller node (in case of Exynos5250,
+ Exynos5420 and Exynos7).
required:
- compatible
@@ -58,6 +58,7 @@ allOf:
enum:
- samsung,exynos5250-wdt
- samsung,exynos5420-wdt
+ - samsung,exynos7-wdt
then:
required:
- samsung,syscon-phandle
From: Miaoqian Lin <[email protected]>
commit 99218cbf81bf21355a3de61cd46a706d36e900e6 upstream.
platform_get_irq() returns negative error number instead 0 on failure.
And the doc of platform_get_irq() provides a usage example:
int irq = platform_get_irq(pdev, 0);
if (irq < 0)
return irq;
Fix the check of return value to catch errors correctly.
Fixes: 115978859272 ("i825xx: Move the Intel 82586/82593/82596 based drivers")
Signed-off-by: Miaoqian Lin <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/i825xx/sni_82596.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/net/ethernet/i825xx/sni_82596.c
+++ b/drivers/net/ethernet/i825xx/sni_82596.c
@@ -117,9 +117,10 @@ static int sni_82596_probe(struct platfo
netdevice->dev_addr[5] = readb(eth_addr + 0x06);
iounmap(eth_addr);
- if (!netdevice->irq) {
+ if (netdevice->irq < 0) {
printk(KERN_ERR "%s: IRQ not found for i82596 at 0x%lx\n",
__FILE__, netdevice->base_addr);
+ retval = netdevice->irq;
goto probe_failed;
}
From: Russell King (Oracle) <[email protected]>
commit 5765cee119bf5a36c94d20eceb37c445508934be upstream.
Commit 7cfa9c92d0a3 ("net: sfp: avoid power switch on address-change
modules") unintetionally changed the semantics for high power modules
without the digital diagnostics monitoring. We repeatedly attempt to
read the power status from the non-existing 0xa2 address in a futile
hope this failure is temporary:
[ 8.856051] sfp sfp-eth3: module NTT 0000000000000000 rev 0000 sn 0000000000000000 dc 160408
[ 8.865843] mvpp2 f4000000.ethernet eth3: switched to inband/1000base-x link mode
[ 8.873469] sfp sfp-eth3: Failed to read EEPROM: -5
[ 8.983251] sfp sfp-eth3: Failed to read EEPROM: -5
[ 9.103250] sfp sfp-eth3: Failed to read EEPROM: -5
We previosuly assumed such modules were powered up in the correct mode,
continuing without further configuration as long as the required power
class was supported by the host.
Restore this behaviour, while preserving the intent of subsequent
patches to avoid the "Address Change Sequence not supported" warning
if we are not going to be accessing the DDM address.
Fixes: 7cfa9c92d0a3 ("net: sfp: avoid power switch on address-change modules")
Reported-by: 照山周一郎 <[email protected]>
Tested-by: 照山周一郎 <[email protected]>
Signed-off-by: Russell King (Oracle) <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/phy/sfp.c | 25 +++++++++++++++++++++----
1 file changed, 21 insertions(+), 4 deletions(-)
--- a/drivers/net/phy/sfp.c
+++ b/drivers/net/phy/sfp.c
@@ -1589,17 +1589,20 @@ static int sfp_sm_probe_for_phy(struct s
static int sfp_module_parse_power(struct sfp *sfp)
{
u32 power_mW = 1000;
+ bool supports_a2;
if (sfp->id.ext.options & cpu_to_be16(SFP_OPTIONS_POWER_DECL))
power_mW = 1500;
if (sfp->id.ext.options & cpu_to_be16(SFP_OPTIONS_HIGH_POWER_LEVEL))
power_mW = 2000;
+ supports_a2 = sfp->id.ext.sff8472_compliance !=
+ SFP_SFF8472_COMPLIANCE_NONE ||
+ sfp->id.ext.diagmon & SFP_DIAGMON_DDM;
+
if (power_mW > sfp->max_power_mW) {
/* Module power specification exceeds the allowed maximum. */
- if (sfp->id.ext.sff8472_compliance ==
- SFP_SFF8472_COMPLIANCE_NONE &&
- !(sfp->id.ext.diagmon & SFP_DIAGMON_DDM)) {
+ if (!supports_a2) {
/* The module appears not to implement bus address
* 0xa2, so assume that the module powers up in the
* indicated mode.
@@ -1616,11 +1619,25 @@ static int sfp_module_parse_power(struct
}
}
+ if (power_mW <= 1000) {
+ /* Modules below 1W do not require a power change sequence */
+ sfp->module_power_mW = power_mW;
+ return 0;
+ }
+
+ if (!supports_a2) {
+ /* The module power level is below the host maximum and the
+ * module appears not to implement bus address 0xa2, so assume
+ * that the module powers up in the indicated mode.
+ */
+ return 0;
+ }
+
/* If the module requires a higher power mode, but also requires
* an address change sequence, warn the user that the module may
* not be functional.
*/
- if (sfp->id.ext.diagmon & SFP_DIAGMON_ADDRMODE && power_mW > 1000) {
+ if (sfp->id.ext.diagmon & SFP_DIAGMON_ADDRMODE) {
dev_warn(sfp->dev,
"Address Change Sequence not supported but module requires %u.%uW, module may not be functional\n",
power_mW / 1000, (power_mW / 100) % 10);
From: Nicolas Toromanoff <[email protected]>
[ Upstream commit 41c76690b0990efacd15d35cfb4e77318cd80ebb ]
STM32 CRYP hardware doesn't manage CTR counter bigger than max U32, as
a workaround, at each block the current IV is saved, if the saved IV
lower u32 is 0xFFFFFFFF, the full IV is manually incremented, and set
in hardware.
Fixes: bbb2832620ac ("crypto: stm32 - Fix sparse warnings")
Signed-off-by: Nicolas Toromanoff <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/crypto/stm32/stm32-cryp.c | 27 +++++++++++++--------------
1 file changed, 13 insertions(+), 14 deletions(-)
diff --git a/drivers/crypto/stm32/stm32-cryp.c b/drivers/crypto/stm32/stm32-cryp.c
index 7389a0536ff02..d13b262b36252 100644
--- a/drivers/crypto/stm32/stm32-cryp.c
+++ b/drivers/crypto/stm32/stm32-cryp.c
@@ -163,7 +163,7 @@ struct stm32_cryp {
struct scatter_walk in_walk;
struct scatter_walk out_walk;
- u32 last_ctr[4];
+ __be32 last_ctr[4];
u32 gcm_ctr;
};
@@ -1217,27 +1217,26 @@ static void stm32_cryp_check_ctr_counter(struct stm32_cryp *cryp)
{
u32 cr;
- if (unlikely(cryp->last_ctr[3] == 0xFFFFFFFF)) {
- cryp->last_ctr[3] = 0;
- cryp->last_ctr[2]++;
- if (!cryp->last_ctr[2]) {
- cryp->last_ctr[1]++;
- if (!cryp->last_ctr[1])
- cryp->last_ctr[0]++;
- }
+ if (unlikely(cryp->last_ctr[3] == cpu_to_be32(0xFFFFFFFF))) {
+ /*
+ * In this case, we need to increment manually the ctr counter,
+ * as HW doesn't handle the U32 carry.
+ */
+ crypto_inc((u8 *)cryp->last_ctr, sizeof(cryp->last_ctr));
cr = stm32_cryp_read(cryp, CRYP_CR);
stm32_cryp_write(cryp, CRYP_CR, cr & ~CR_CRYPEN);
- stm32_cryp_hw_write_iv(cryp, (__be32 *)cryp->last_ctr);
+ stm32_cryp_hw_write_iv(cryp, cryp->last_ctr);
stm32_cryp_write(cryp, CRYP_CR, cr);
}
- cryp->last_ctr[0] = stm32_cryp_read(cryp, CRYP_IV0LR);
- cryp->last_ctr[1] = stm32_cryp_read(cryp, CRYP_IV0RR);
- cryp->last_ctr[2] = stm32_cryp_read(cryp, CRYP_IV1LR);
- cryp->last_ctr[3] = stm32_cryp_read(cryp, CRYP_IV1RR);
+ /* The IV registers are BE */
+ cryp->last_ctr[0] = cpu_to_be32(stm32_cryp_read(cryp, CRYP_IV0LR));
+ cryp->last_ctr[1] = cpu_to_be32(stm32_cryp_read(cryp, CRYP_IV0RR));
+ cryp->last_ctr[2] = cpu_to_be32(stm32_cryp_read(cryp, CRYP_IV1LR));
+ cryp->last_ctr[3] = cpu_to_be32(stm32_cryp_read(cryp, CRYP_IV1RR));
}
static bool stm32_cryp_irq_read_data(struct stm32_cryp *cryp)
--
2.34.1
From: Tsuchiya Yuto <[email protected]>
[ Upstream commit ce3015b7212e96db426d0c36f80fd159c91155d1 ]
After the commit 9832e155f1ed ("[media] media-device: split media
initialization and registration"), calling media_device_cleanup()
is needed it seems. However, currently it is missing for the module
unload path.
Note that for the probe failure path, it is already added in
atomisp_register_entities().
This patch adds the missing call of media_device_cleanup() in
atomisp_unregister_entities().
Fixes: a49d25364dfb ("staging/atomisp: Add support for the Intel IPU v2")
Signed-off-by: Tsuchiya Yuto <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/staging/media/atomisp/pci/atomisp_v4l2.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/staging/media/atomisp/pci/atomisp_v4l2.c b/drivers/staging/media/atomisp/pci/atomisp_v4l2.c
index fa1bd99cd6f17..d35506f643609 100644
--- a/drivers/staging/media/atomisp/pci/atomisp_v4l2.c
+++ b/drivers/staging/media/atomisp/pci/atomisp_v4l2.c
@@ -1182,6 +1182,7 @@ static void atomisp_unregister_entities(struct atomisp_device *isp)
v4l2_device_unregister(&isp->v4l2_dev);
media_device_unregister(&isp->media_dev);
+ media_device_cleanup(&isp->media_dev);
}
static int atomisp_register_entities(struct atomisp_device *isp)
--
2.34.1
From: Marcelo Tosatti <[email protected]>
commit 5f02ef741a785678930f3ff0a8b6b2b0ef1bb402 upstream.
blocked_vcpu_on_cpu_lock is taken from hard interrupt context
(pi_wakeup_handler), therefore it cannot sleep.
Switch it to a raw spinlock.
Fixes:
[41297.066254] BUG: scheduling while atomic: CPU 0/KVM/635218/0x00010001
[41297.066323] Preemption disabled at:
[41297.066324] [<ffffffff902ee47f>] irq_enter_rcu+0xf/0x60
[41297.066339] Call Trace:
[41297.066342] <IRQ>
[41297.066346] dump_stack_lvl+0x34/0x44
[41297.066353] ? irq_enter_rcu+0xf/0x60
[41297.066356] __schedule_bug.cold+0x7d/0x8b
[41297.066361] __schedule+0x439/0x5b0
[41297.066365] ? task_blocks_on_rt_mutex.constprop.0.isra.0+0x1b0/0x440
[41297.066369] schedule_rtlock+0x1e/0x40
[41297.066371] rtlock_slowlock_locked+0xf1/0x260
[41297.066374] rt_spin_lock+0x3b/0x60
[41297.066378] pi_wakeup_handler+0x31/0x90 [kvm_intel]
[41297.066388] sysvec_kvm_posted_intr_wakeup_ipi+0x9d/0xd0
[41297.066392] </IRQ>
[41297.066392] asm_sysvec_kvm_posted_intr_wakeup_ipi+0x12/0x20
...
Signed-off-by: Marcelo Tosatti <[email protected]>
Cc: [email protected]
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kvm/vmx/posted_intr.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
--- a/arch/x86/kvm/vmx/posted_intr.c
+++ b/arch/x86/kvm/vmx/posted_intr.c
@@ -15,7 +15,7 @@
* can find which vCPU should be waken up.
*/
static DEFINE_PER_CPU(struct list_head, blocked_vcpu_on_cpu);
-static DEFINE_PER_CPU(spinlock_t, blocked_vcpu_on_cpu_lock);
+static DEFINE_PER_CPU(raw_spinlock_t, blocked_vcpu_on_cpu_lock);
static inline struct pi_desc *vcpu_to_pi_desc(struct kvm_vcpu *vcpu)
{
@@ -121,9 +121,9 @@ static void __pi_post_block(struct kvm_v
new.control) != old.control);
if (!WARN_ON_ONCE(vcpu->pre_pcpu == -1)) {
- spin_lock(&per_cpu(blocked_vcpu_on_cpu_lock, vcpu->pre_pcpu));
+ raw_spin_lock(&per_cpu(blocked_vcpu_on_cpu_lock, vcpu->pre_pcpu));
list_del(&vcpu->blocked_vcpu_list);
- spin_unlock(&per_cpu(blocked_vcpu_on_cpu_lock, vcpu->pre_pcpu));
+ raw_spin_unlock(&per_cpu(blocked_vcpu_on_cpu_lock, vcpu->pre_pcpu));
vcpu->pre_pcpu = -1;
}
}
@@ -154,11 +154,11 @@ int pi_pre_block(struct kvm_vcpu *vcpu)
local_irq_disable();
if (!WARN_ON_ONCE(vcpu->pre_pcpu != -1)) {
vcpu->pre_pcpu = vcpu->cpu;
- spin_lock(&per_cpu(blocked_vcpu_on_cpu_lock, vcpu->pre_pcpu));
+ raw_spin_lock(&per_cpu(blocked_vcpu_on_cpu_lock, vcpu->pre_pcpu));
list_add_tail(&vcpu->blocked_vcpu_list,
&per_cpu(blocked_vcpu_on_cpu,
vcpu->pre_pcpu));
- spin_unlock(&per_cpu(blocked_vcpu_on_cpu_lock, vcpu->pre_pcpu));
+ raw_spin_unlock(&per_cpu(blocked_vcpu_on_cpu_lock, vcpu->pre_pcpu));
}
do {
@@ -215,7 +215,7 @@ void pi_wakeup_handler(void)
struct kvm_vcpu *vcpu;
int cpu = smp_processor_id();
- spin_lock(&per_cpu(blocked_vcpu_on_cpu_lock, cpu));
+ raw_spin_lock(&per_cpu(blocked_vcpu_on_cpu_lock, cpu));
list_for_each_entry(vcpu, &per_cpu(blocked_vcpu_on_cpu, cpu),
blocked_vcpu_list) {
struct pi_desc *pi_desc = vcpu_to_pi_desc(vcpu);
@@ -223,13 +223,13 @@ void pi_wakeup_handler(void)
if (pi_test_on(pi_desc) == 1)
kvm_vcpu_kick(vcpu);
}
- spin_unlock(&per_cpu(blocked_vcpu_on_cpu_lock, cpu));
+ raw_spin_unlock(&per_cpu(blocked_vcpu_on_cpu_lock, cpu));
}
void __init pi_init_cpu(int cpu)
{
INIT_LIST_HEAD(&per_cpu(blocked_vcpu_on_cpu, cpu));
- spin_lock_init(&per_cpu(blocked_vcpu_on_cpu_lock, cpu));
+ raw_spin_lock_init(&per_cpu(blocked_vcpu_on_cpu_lock, cpu));
}
bool pi_has_pending_interrupt(struct kvm_vcpu *vcpu)
From: Vincent Donnefort <[email protected]>
[ Upstream commit 8b4e74ccb582797f6f0b0a50372ebd9fd2372a27 ]
select_idle_sibling() has a special case for tasks woken up by a per-CPU
kthread, where the selected CPU is the previous one. However, the current
condition for this exit path is incomplete. A task can wake up from an
interrupt context (e.g. hrtimer), while a per-CPU kthread is running. A
such scenario would spuriously trigger the special case described above.
Also, a recent change made the idle task like a regular per-CPU kthread,
hence making that situation more likely to happen
(is_per_cpu_kthread(swapper) being true now).
Checking for task context makes sure select_idle_sibling() will not
interpret a wake up from any other context as a wake up by a per-CPU
kthread.
Fixes: 52262ee567ad ("sched/fair: Allow a per-CPU kthread waking a task to stack on the same CPU, to fix XFS performance regression")
Signed-off-by: Vincent Donnefort <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Vincent Guittot <[email protected]>
Reviewed-by: Valentin Schneider <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/sched/fair.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c
index c004e3b89c324..a7589552be5fc 100644
--- a/kernel/sched/fair.c
+++ b/kernel/sched/fair.c
@@ -6284,6 +6284,7 @@ static int select_idle_sibling(struct task_struct *p, int prev, int target)
* pattern is IO completions.
*/
if (is_per_cpu_kthread(current) &&
+ in_task() &&
prev == smp_processor_id() &&
this_rq()->nr_running <= 1) {
return prev;
--
2.34.1
From: Anton Vasilyev <[email protected]>
[ Upstream commit 589a9f0eb799f77de2c09583bf5bad221fa5d685 ]
dvb_usb_device_init stores parts of properties at d->props
and d->desc and uses it on dvb_usb_device_exit.
Free of properties on module probe leads to use after free.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204597
The patch makes properties static instead of allocated on heap to prevent
memleak and use after free.
Also fixes s421_properties.devices initialization to have 2 element
instead of 6 copied from p7500_properties.
[mchehab: fix function call alignments]
Link: https://lore.kernel.org/linux-media/[email protected]
Signed-off-by: Anton Vasilyev <[email protected]>
Fixes: 299c7007e936 ("media: dw2102: Fix memleak on sequence of probes")
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/usb/dvb-usb/dw2102.c | 338 ++++++++++++++++++-----------
1 file changed, 215 insertions(+), 123 deletions(-)
diff --git a/drivers/media/usb/dvb-usb/dw2102.c b/drivers/media/usb/dvb-usb/dw2102.c
index a27a684403252..aa929db56db1f 100644
--- a/drivers/media/usb/dvb-usb/dw2102.c
+++ b/drivers/media/usb/dvb-usb/dw2102.c
@@ -2148,46 +2148,153 @@ static struct dvb_usb_device_properties s6x0_properties = {
}
};
-static const struct dvb_usb_device_description d1100 = {
- "Prof 1100 USB ",
- {&dw2102_table[PROF_1100], NULL},
- {NULL},
-};
+static struct dvb_usb_device_properties p1100_properties = {
+ .caps = DVB_USB_IS_AN_I2C_ADAPTER,
+ .usb_ctrl = DEVICE_SPECIFIC,
+ .size_of_priv = sizeof(struct dw2102_state),
+ .firmware = P1100_FIRMWARE,
+ .no_reconnect = 1,
-static const struct dvb_usb_device_description d660 = {
- "TeVii S660 USB",
- {&dw2102_table[TEVII_S660], NULL},
- {NULL},
-};
+ .i2c_algo = &s6x0_i2c_algo,
+ .rc.core = {
+ .rc_interval = 150,
+ .rc_codes = RC_MAP_TBS_NEC,
+ .module_name = "dw2102",
+ .allowed_protos = RC_PROTO_BIT_NEC,
+ .rc_query = prof_rc_query,
+ },
-static const struct dvb_usb_device_description d480_1 = {
- "TeVii S480.1 USB",
- {&dw2102_table[TEVII_S480_1], NULL},
- {NULL},
+ .generic_bulk_ctrl_endpoint = 0x81,
+ .num_adapters = 1,
+ .download_firmware = dw2102_load_firmware,
+ .read_mac_address = s6x0_read_mac_address,
+ .adapter = {
+ {
+ .num_frontends = 1,
+ .fe = {{
+ .frontend_attach = stv0288_frontend_attach,
+ .stream = {
+ .type = USB_BULK,
+ .count = 8,
+ .endpoint = 0x82,
+ .u = {
+ .bulk = {
+ .buffersize = 4096,
+ }
+ }
+ },
+ } },
+ }
+ },
+ .num_device_descs = 1,
+ .devices = {
+ {"Prof 1100 USB ",
+ {&dw2102_table[PROF_1100], NULL},
+ {NULL},
+ },
+ }
};
-static const struct dvb_usb_device_description d480_2 = {
- "TeVii S480.2 USB",
- {&dw2102_table[TEVII_S480_2], NULL},
- {NULL},
-};
+static struct dvb_usb_device_properties s660_properties = {
+ .caps = DVB_USB_IS_AN_I2C_ADAPTER,
+ .usb_ctrl = DEVICE_SPECIFIC,
+ .size_of_priv = sizeof(struct dw2102_state),
+ .firmware = S660_FIRMWARE,
+ .no_reconnect = 1,
-static const struct dvb_usb_device_description d7500 = {
- "Prof 7500 USB DVB-S2",
- {&dw2102_table[PROF_7500], NULL},
- {NULL},
-};
+ .i2c_algo = &s6x0_i2c_algo,
+ .rc.core = {
+ .rc_interval = 150,
+ .rc_codes = RC_MAP_TEVII_NEC,
+ .module_name = "dw2102",
+ .allowed_protos = RC_PROTO_BIT_NEC,
+ .rc_query = dw2102_rc_query,
+ },
-static const struct dvb_usb_device_description d421 = {
- "TeVii S421 PCI",
- {&dw2102_table[TEVII_S421], NULL},
- {NULL},
+ .generic_bulk_ctrl_endpoint = 0x81,
+ .num_adapters = 1,
+ .download_firmware = dw2102_load_firmware,
+ .read_mac_address = s6x0_read_mac_address,
+ .adapter = {
+ {
+ .num_frontends = 1,
+ .fe = {{
+ .frontend_attach = ds3000_frontend_attach,
+ .stream = {
+ .type = USB_BULK,
+ .count = 8,
+ .endpoint = 0x82,
+ .u = {
+ .bulk = {
+ .buffersize = 4096,
+ }
+ }
+ },
+ } },
+ }
+ },
+ .num_device_descs = 3,
+ .devices = {
+ {"TeVii S660 USB",
+ {&dw2102_table[TEVII_S660], NULL},
+ {NULL},
+ },
+ {"TeVii S480.1 USB",
+ {&dw2102_table[TEVII_S480_1], NULL},
+ {NULL},
+ },
+ {"TeVii S480.2 USB",
+ {&dw2102_table[TEVII_S480_2], NULL},
+ {NULL},
+ },
+ }
};
-static const struct dvb_usb_device_description d632 = {
- "TeVii S632 USB",
- {&dw2102_table[TEVII_S632], NULL},
- {NULL},
+static struct dvb_usb_device_properties p7500_properties = {
+ .caps = DVB_USB_IS_AN_I2C_ADAPTER,
+ .usb_ctrl = DEVICE_SPECIFIC,
+ .size_of_priv = sizeof(struct dw2102_state),
+ .firmware = P7500_FIRMWARE,
+ .no_reconnect = 1,
+
+ .i2c_algo = &s6x0_i2c_algo,
+ .rc.core = {
+ .rc_interval = 150,
+ .rc_codes = RC_MAP_TBS_NEC,
+ .module_name = "dw2102",
+ .allowed_protos = RC_PROTO_BIT_NEC,
+ .rc_query = prof_rc_query,
+ },
+
+ .generic_bulk_ctrl_endpoint = 0x81,
+ .num_adapters = 1,
+ .download_firmware = dw2102_load_firmware,
+ .read_mac_address = s6x0_read_mac_address,
+ .adapter = {
+ {
+ .num_frontends = 1,
+ .fe = {{
+ .frontend_attach = prof_7500_frontend_attach,
+ .stream = {
+ .type = USB_BULK,
+ .count = 8,
+ .endpoint = 0x82,
+ .u = {
+ .bulk = {
+ .buffersize = 4096,
+ }
+ }
+ },
+ } },
+ }
+ },
+ .num_device_descs = 1,
+ .devices = {
+ {"Prof 7500 USB DVB-S2",
+ {&dw2102_table[PROF_7500], NULL},
+ {NULL},
+ },
+ }
};
static struct dvb_usb_device_properties su3000_properties = {
@@ -2267,6 +2374,59 @@ static struct dvb_usb_device_properties su3000_properties = {
}
};
+static struct dvb_usb_device_properties s421_properties = {
+ .caps = DVB_USB_IS_AN_I2C_ADAPTER,
+ .usb_ctrl = DEVICE_SPECIFIC,
+ .size_of_priv = sizeof(struct dw2102_state),
+ .power_ctrl = su3000_power_ctrl,
+ .num_adapters = 1,
+ .identify_state = su3000_identify_state,
+ .i2c_algo = &su3000_i2c_algo,
+
+ .rc.core = {
+ .rc_interval = 150,
+ .rc_codes = RC_MAP_SU3000,
+ .module_name = "dw2102",
+ .allowed_protos = RC_PROTO_BIT_RC5,
+ .rc_query = su3000_rc_query,
+ },
+
+ .read_mac_address = su3000_read_mac_address,
+
+ .generic_bulk_ctrl_endpoint = 0x01,
+
+ .adapter = {
+ {
+ .num_frontends = 1,
+ .fe = {{
+ .streaming_ctrl = su3000_streaming_ctrl,
+ .frontend_attach = m88rs2000_frontend_attach,
+ .stream = {
+ .type = USB_BULK,
+ .count = 8,
+ .endpoint = 0x82,
+ .u = {
+ .bulk = {
+ .buffersize = 4096,
+ }
+ }
+ }
+ } },
+ }
+ },
+ .num_device_descs = 2,
+ .devices = {
+ { "TeVii S421 PCI",
+ { &dw2102_table[TEVII_S421], NULL },
+ { NULL },
+ },
+ { "TeVii S632 USB",
+ { &dw2102_table[TEVII_S632], NULL },
+ { NULL },
+ },
+ }
+};
+
static struct dvb_usb_device_properties t220_properties = {
.caps = DVB_USB_IS_AN_I2C_ADAPTER,
.usb_ctrl = DEVICE_SPECIFIC,
@@ -2384,101 +2544,33 @@ static struct dvb_usb_device_properties tt_s2_4600_properties = {
static int dw2102_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
- int retval = -ENOMEM;
- struct dvb_usb_device_properties *p1100;
- struct dvb_usb_device_properties *s660;
- struct dvb_usb_device_properties *p7500;
- struct dvb_usb_device_properties *s421;
-
- p1100 = kmemdup(&s6x0_properties,
- sizeof(struct dvb_usb_device_properties), GFP_KERNEL);
- if (!p1100)
- goto err0;
-
- /* copy default structure */
- /* fill only different fields */
- p1100->firmware = P1100_FIRMWARE;
- p1100->devices[0] = d1100;
- p1100->rc.core.rc_query = prof_rc_query;
- p1100->rc.core.rc_codes = RC_MAP_TBS_NEC;
- p1100->adapter->fe[0].frontend_attach = stv0288_frontend_attach;
-
- s660 = kmemdup(&s6x0_properties,
- sizeof(struct dvb_usb_device_properties), GFP_KERNEL);
- if (!s660)
- goto err1;
-
- s660->firmware = S660_FIRMWARE;
- s660->num_device_descs = 3;
- s660->devices[0] = d660;
- s660->devices[1] = d480_1;
- s660->devices[2] = d480_2;
- s660->adapter->fe[0].frontend_attach = ds3000_frontend_attach;
-
- p7500 = kmemdup(&s6x0_properties,
- sizeof(struct dvb_usb_device_properties), GFP_KERNEL);
- if (!p7500)
- goto err2;
-
- p7500->firmware = P7500_FIRMWARE;
- p7500->devices[0] = d7500;
- p7500->rc.core.rc_query = prof_rc_query;
- p7500->rc.core.rc_codes = RC_MAP_TBS_NEC;
- p7500->adapter->fe[0].frontend_attach = prof_7500_frontend_attach;
-
-
- s421 = kmemdup(&su3000_properties,
- sizeof(struct dvb_usb_device_properties), GFP_KERNEL);
- if (!s421)
- goto err3;
-
- s421->num_device_descs = 2;
- s421->devices[0] = d421;
- s421->devices[1] = d632;
- s421->adapter->fe[0].frontend_attach = m88rs2000_frontend_attach;
-
- if (0 == dvb_usb_device_init(intf, &dw2102_properties,
- THIS_MODULE, NULL, adapter_nr) ||
- 0 == dvb_usb_device_init(intf, &dw2104_properties,
- THIS_MODULE, NULL, adapter_nr) ||
- 0 == dvb_usb_device_init(intf, &dw3101_properties,
- THIS_MODULE, NULL, adapter_nr) ||
- 0 == dvb_usb_device_init(intf, &s6x0_properties,
- THIS_MODULE, NULL, adapter_nr) ||
- 0 == dvb_usb_device_init(intf, p1100,
- THIS_MODULE, NULL, adapter_nr) ||
- 0 == dvb_usb_device_init(intf, s660,
- THIS_MODULE, NULL, adapter_nr) ||
- 0 == dvb_usb_device_init(intf, p7500,
- THIS_MODULE, NULL, adapter_nr) ||
- 0 == dvb_usb_device_init(intf, s421,
- THIS_MODULE, NULL, adapter_nr) ||
- 0 == dvb_usb_device_init(intf, &su3000_properties,
- THIS_MODULE, NULL, adapter_nr) ||
- 0 == dvb_usb_device_init(intf, &t220_properties,
- THIS_MODULE, NULL, adapter_nr) ||
- 0 == dvb_usb_device_init(intf, &tt_s2_4600_properties,
- THIS_MODULE, NULL, adapter_nr)) {
-
- /* clean up copied properties */
- kfree(s421);
- kfree(p7500);
- kfree(s660);
- kfree(p1100);
+ if (!(dvb_usb_device_init(intf, &dw2102_properties,
+ THIS_MODULE, NULL, adapter_nr) &&
+ dvb_usb_device_init(intf, &dw2104_properties,
+ THIS_MODULE, NULL, adapter_nr) &&
+ dvb_usb_device_init(intf, &dw3101_properties,
+ THIS_MODULE, NULL, adapter_nr) &&
+ dvb_usb_device_init(intf, &s6x0_properties,
+ THIS_MODULE, NULL, adapter_nr) &&
+ dvb_usb_device_init(intf, &p1100_properties,
+ THIS_MODULE, NULL, adapter_nr) &&
+ dvb_usb_device_init(intf, &s660_properties,
+ THIS_MODULE, NULL, adapter_nr) &&
+ dvb_usb_device_init(intf, &p7500_properties,
+ THIS_MODULE, NULL, adapter_nr) &&
+ dvb_usb_device_init(intf, &s421_properties,
+ THIS_MODULE, NULL, adapter_nr) &&
+ dvb_usb_device_init(intf, &su3000_properties,
+ THIS_MODULE, NULL, adapter_nr) &&
+ dvb_usb_device_init(intf, &t220_properties,
+ THIS_MODULE, NULL, adapter_nr) &&
+ dvb_usb_device_init(intf, &tt_s2_4600_properties,
+ THIS_MODULE, NULL, adapter_nr))) {
return 0;
}
- retval = -ENODEV;
- kfree(s421);
-err3:
- kfree(p7500);
-err2:
- kfree(s660);
-err1:
- kfree(p1100);
-err0:
- return retval;
+ return -ENODEV;
}
static void dw2102_disconnect(struct usb_interface *intf)
--
2.34.1
From: Jakub Kicinski <[email protected]>
[ Upstream commit 3abedf4646fdc0036fcb8ebbc3b600667167fafe ]
Test can fail either immediately when ASSERT() failed or at the
end if one or more EXPECT() was not met. The exact return code
is decided based on the number of successful ASSERT()s.
If test has no ASSERT()s, however, the return code will be 0,
as if the test did not fail. Start counting ASSERT()s from 1.
Fixes: 369130b63178 ("selftests: Enhance kselftest_harness.h to print which assert failed")
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/kselftest_harness.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/testing/selftests/kselftest_harness.h b/tools/testing/selftests/kselftest_harness.h
index edce85420d193..5ecb9718e1616 100644
--- a/tools/testing/selftests/kselftest_harness.h
+++ b/tools/testing/selftests/kselftest_harness.h
@@ -965,7 +965,7 @@ void __run_test(struct __fixture_metadata *f,
t->passed = 1;
t->skip = 0;
t->trigger = 0;
- t->step = 0;
+ t->step = 1;
t->no_print = 0;
memset(t->results->reason, 0, sizeof(t->results->reason));
--
2.34.1
From: Eric Dumazet <[email protected]>
[ Upstream commit 7770a39d7c63faec6c4f33666d49a8cb664d0482 ]
copy_user_offload() will actually push a struct struct xfrm_user_offload,
which is different than (struct xfrm_state *)->xso
(struct xfrm_state_offload)
Fixes: d77e38e612a01 ("xfrm: Add an IPsec hardware offloading API")
Signed-off-by: Eric Dumazet <[email protected]>
Cc: Steffen Klassert <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/xfrm/xfrm_user.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c
index 6f97665b632ed..97f7ebf5324e7 100644
--- a/net/xfrm/xfrm_user.c
+++ b/net/xfrm/xfrm_user.c
@@ -2898,7 +2898,7 @@ static inline unsigned int xfrm_sa_len(struct xfrm_state *x)
if (x->props.extra_flags)
l += nla_total_size(sizeof(x->props.extra_flags));
if (x->xso.dev)
- l += nla_total_size(sizeof(x->xso));
+ l += nla_total_size(sizeof(struct xfrm_user_offload));
if (x->props.smark.v | x->props.smark.m) {
l += nla_total_size(sizeof(x->props.smark.v));
l += nla_total_size(sizeof(x->props.smark.m));
--
2.34.1
From: Alexander Stein <[email protected]>
[ Upstream commit bb98a6fd0b0e227cefb2ba91cea2b55455f203b7 ]
Starting with commit 94274f20f6bf ("dt-bindings: opp: Convert to DT
schema") the opp node name has a mandatory pattern. This change
fixes the dtbs_check warning:
gpu-opp-table: $nodename:0: 'gpu-opp-table' does not match
'^opp-table(-[a-z0-9]+)?$'
Put the 'gpu' part at the end to match the pattern.
Fixes: 916a0edc43f0 ("arm64: dts: amlogic: meson-g12: add the Mali OPP table and use DVFS")
Reviewed-by: Neil Armstrong <[email protected]>
Signed-off-by: Alexander Stein <[email protected]>
Signed-off-by: Neil Armstrong <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
index 959b299344e54..7342c8a2b322d 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
@@ -52,7 +52,7 @@
secure-monitor = <&sm>;
};
- gpu_opp_table: gpu-opp-table {
+ gpu_opp_table: opp-table-gpu {
compatible = "operating-points-v2";
opp-124999998 {
--
2.34.1
From: Lad Prabhakar <[email protected]>
[ Upstream commit 818fdfa89baac77a8df5a2c30f4fb798cc937aa0 ]
Make sure we return error in case devm_ioremap_resource() fails for dirmap
resource.
Fixes: ca7d8b980b67 ("memory: add Renesas RPC-IF driver")
Signed-off-by: Lad Prabhakar <[email protected]>
Reviewed-by: Biju Das <[email protected]>
Reviewed-by: Wolfram Sang <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/memory/renesas-rpc-if.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/memory/renesas-rpc-if.c b/drivers/memory/renesas-rpc-if.c
index a760ab08256ff..9019121a80f53 100644
--- a/drivers/memory/renesas-rpc-if.c
+++ b/drivers/memory/renesas-rpc-if.c
@@ -245,7 +245,7 @@ int rpcif_sw_init(struct rpcif *rpc, struct device *dev)
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dirmap");
rpc->dirmap = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(rpc->dirmap))
- rpc->dirmap = NULL;
+ return PTR_ERR(rpc->dirmap);
rpc->size = resource_size(res);
rpc->rstc = devm_reset_control_get_exclusive(&pdev->dev, NULL);
--
2.34.1
From: Aline Santana Cordeiro <[email protected]>
[ Upstream commit 0a016c35a326c6b2f558ede58ff08da7ef1da1a8 ]
Balance braces around conditional statements.
Issue detected by checkpatch.pl.
It happens in if-else statements where one of the commands
uses braces around a block of code and the other command
does not since it has just a single line of code.
Signed-off-by: Aline Santana Cordeiro <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../staging/media/atomisp/pci/atomisp_cmd.c | 19 ++++++++++---------
1 file changed, 10 insertions(+), 9 deletions(-)
diff --git a/drivers/staging/media/atomisp/pci/atomisp_cmd.c b/drivers/staging/media/atomisp/pci/atomisp_cmd.c
index 592ea990d4ca4..21cd03f06291d 100644
--- a/drivers/staging/media/atomisp/pci/atomisp_cmd.c
+++ b/drivers/staging/media/atomisp/pci/atomisp_cmd.c
@@ -1138,9 +1138,10 @@ void atomisp_buf_done(struct atomisp_sub_device *asd, int error,
asd->frame_status[vb->i] =
ATOMISP_FRAME_STATUS_OK;
}
- } else
+ } else {
asd->frame_status[vb->i] =
ATOMISP_FRAME_STATUS_OK;
+ }
} else {
asd->frame_status[vb->i] = ATOMISP_FRAME_STATUS_OK;
}
@@ -4945,9 +4946,9 @@ atomisp_try_fmt_file(struct atomisp_device *isp, struct v4l2_format *f)
depth = get_pixel_depth(pixelformat);
- if (field == V4L2_FIELD_ANY)
+ if (field == V4L2_FIELD_ANY) {
field = V4L2_FIELD_NONE;
- else if (field != V4L2_FIELD_NONE) {
+ } else if (field != V4L2_FIELD_NONE) {
dev_err(isp->dev, "Wrong output field\n");
return -EINVAL;
}
@@ -6587,17 +6588,17 @@ static int atomisp_get_pipe_id(struct atomisp_video_pipe *pipe)
{
struct atomisp_sub_device *asd = pipe->asd;
- if (ATOMISP_USE_YUVPP(asd))
+ if (ATOMISP_USE_YUVPP(asd)) {
return IA_CSS_PIPE_ID_YUVPP;
- else if (asd->vfpp->val == ATOMISP_VFPP_DISABLE_SCALER)
+ } else if (asd->vfpp->val == ATOMISP_VFPP_DISABLE_SCALER) {
return IA_CSS_PIPE_ID_VIDEO;
- else if (asd->vfpp->val == ATOMISP_VFPP_DISABLE_LOWLAT)
+ } else if (asd->vfpp->val == ATOMISP_VFPP_DISABLE_LOWLAT) {
return IA_CSS_PIPE_ID_CAPTURE;
- else if (pipe == &asd->video_out_video_capture)
+ } else if (pipe == &asd->video_out_video_capture) {
return IA_CSS_PIPE_ID_VIDEO;
- else if (pipe == &asd->video_out_vf)
+ } else if (pipe == &asd->video_out_vf) {
return IA_CSS_PIPE_ID_CAPTURE;
- else if (pipe == &asd->video_out_preview) {
+ } else if (pipe == &asd->video_out_preview) {
if (asd->run_mode->val == ATOMISP_RUN_MODE_VIDEO)
return IA_CSS_PIPE_ID_VIDEO;
else
--
2.34.1
From: Dafna Hirschfeld <[email protected]>
[ Upstream commit 9f89c881bffbdffe4060ffaef3489a2830a6dd9c ]
The func v4l2_m2m_ctx_release waits for currently running jobs
to finish and then stop streaming both queues and frees the buffers.
All this should be done before the call to mtk_vcodec_enc_release
which frees the encoder handler. This fixes null-pointer dereference bug:
[ 638.028076] Mem abort info:
[ 638.030932] ESR = 0x96000004
[ 638.033978] EC = 0x25: DABT (current EL), IL = 32 bits
[ 638.039293] SET = 0, FnV = 0
[ 638.042338] EA = 0, S1PTW = 0
[ 638.045474] FSC = 0x04: level 0 translation fault
[ 638.050349] Data abort info:
[ 638.053224] ISV = 0, ISS = 0x00000004
[ 638.057055] CM = 0, WnR = 0
[ 638.060018] user pgtable: 4k pages, 48-bit VAs, pgdp=000000012b6db000
[ 638.066485] [00000000000001a0] pgd=0000000000000000, p4d=0000000000000000
[ 638.073277] Internal error: Oops: 96000004 [#1] SMP
[ 638.078145] Modules linked in: rfkill mtk_vcodec_dec mtk_vcodec_enc uvcvideo mtk_mdp mtk_vcodec_common videobuf2_dma_contig v4l2_h264 cdc_ether v4l2_mem2mem videobuf2_vmalloc usbnet videobuf2_memops videobuf2_v4l2 r8152 videobuf2_common videodev cros_ec_sensors cros_ec_sensors_core industrialio_triggered_buffer kfifo_buf elan_i2c elants_i2c sbs_battery mc cros_usbpd_charger cros_ec_chardev cros_usbpd_logger crct10dif_ce mtk_vpu fuse ip_tables x_tables ipv6
[ 638.118583] CPU: 0 PID: 212 Comm: kworker/u8:5 Not tainted 5.15.0-06427-g58a1d4dcfc74-dirty #109
[ 638.127357] Hardware name: Google Elm (DT)
[ 638.131444] Workqueue: mtk-vcodec-enc mtk_venc_worker [mtk_vcodec_enc]
[ 638.137974] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 638.144925] pc : vp8_enc_encode+0x34/0x2b0 [mtk_vcodec_enc]
[ 638.150493] lr : venc_if_encode+0xac/0x1b0 [mtk_vcodec_enc]
[ 638.156060] sp : ffff8000124d3c40
[ 638.159364] x29: ffff8000124d3c40 x28: 0000000000000000 x27: 0000000000000000
[ 638.166493] x26: 0000000000000000 x25: ffff0000e7f252d0 x24: ffff8000124d3d58
[ 638.173621] x23: ffff8000124d3d58 x22: ffff8000124d3d60 x21: 0000000000000001
[ 638.180750] x20: ffff80001137e000 x19: 0000000000000000 x18: 0000000000000001
[ 638.187878] x17: 000000040044ffff x16: 00400032b5503510 x15: 0000000000000000
[ 638.195006] x14: ffff8000118536c0 x13: ffff8000ee1da000 x12: 0000000030d4d91d
[ 638.202134] x11: 0000000000000000 x10: 0000000000000980 x9 : ffff8000124d3b20
[ 638.209262] x8 : ffff0000c18d4ea0 x7 : ffff0000c18d44c0 x6 : ffff0000c18d44c0
[ 638.216391] x5 : ffff80000904a3b0 x4 : ffff8000124d3d58 x3 : ffff8000124d3d60
[ 638.223519] x2 : ffff8000124d3d78 x1 : 0000000000000001 x0 : ffff80001137efb8
[ 638.230648] Call trace:
[ 638.233084] vp8_enc_encode+0x34/0x2b0 [mtk_vcodec_enc]
[ 638.238304] venc_if_encode+0xac/0x1b0 [mtk_vcodec_enc]
[ 638.243525] mtk_venc_worker+0x110/0x250 [mtk_vcodec_enc]
[ 638.248918] process_one_work+0x1f8/0x498
[ 638.252923] worker_thread+0x140/0x538
[ 638.256664] kthread+0x148/0x158
[ 638.259884] ret_from_fork+0x10/0x20
[ 638.263455] Code: f90023f9 2a0103f5 aa0303f6 aa0403f8 (f940d277)
[ 638.269538] ---[ end trace e374fc10f8e181f5 ]---
[gst-master] root@debian:~/gst-build# [ 638.019193] Unable to handle kernel NULL pointer dereference at virtual address 00000000000001a0
Fixes: 4e855a6efa547 ("[media] vcodec: mediatek: Add Mediatek V4L2 Video Encoder Driver")
Signed-off-by: Dafna Hirschfeld <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_drv.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_drv.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_drv.c
index 219c2c5b78efc..5f93bc670edb2 100644
--- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_drv.c
+++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_drv.c
@@ -237,11 +237,11 @@ static int fops_vcodec_release(struct file *file)
mtk_v4l2_debug(1, "[%d] encoder", ctx->id);
mutex_lock(&dev->dev_mutex);
+ v4l2_m2m_ctx_release(ctx->m2m_ctx);
mtk_vcodec_enc_release(ctx);
v4l2_fh_del(&ctx->fh);
v4l2_fh_exit(&ctx->fh);
v4l2_ctrl_handler_free(&ctx->ctrl_hdl);
- v4l2_m2m_ctx_release(ctx->m2m_ctx);
list_del_init(&ctx->list);
kfree(ctx);
--
2.34.1
From: Yunfei Wang <[email protected]>
commit a556cfe4cabc6d79cbb7733f118bbb420b376fe6 upstream.
In __arm_v7s_alloc_table function:
iommu call kmem_cache_alloc to allocate page table, this function
allocate memory may fail, when kmem_cache_alloc fails to allocate
table, call virt_to_phys will be abnomal and return unexpected phys
and goto out_free, then call kmem_cache_free to release table will
trigger KE, __get_free_pages and free_pages have similar problem,
so add error handle for page table allocation failure.
Fixes: 29859aeb8a6e ("iommu/io-pgtable-arm-v7s: Abort allocation when table address overflows the PTE")
Signed-off-by: Yunfei Wang <[email protected]>
Cc: <[email protected]> # 5.10.*
Acked-by: Robin Murphy <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/iommu/io-pgtable-arm-v7s.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
--- a/drivers/iommu/io-pgtable-arm-v7s.c
+++ b/drivers/iommu/io-pgtable-arm-v7s.c
@@ -242,13 +242,17 @@ static void *__arm_v7s_alloc_table(int l
__GFP_ZERO | ARM_V7S_TABLE_GFP_DMA, get_order(size));
else if (lvl == 2)
table = kmem_cache_zalloc(data->l2_tables, gfp);
+
+ if (!table)
+ return NULL;
+
phys = virt_to_phys(table);
if (phys != (arm_v7s_iopte)phys) {
/* Doesn't fit in PTE */
dev_err(dev, "Page table does not fit in PTE: %pa", &phys);
goto out_free;
}
- if (table && !cfg->coherent_walk) {
+ if (!cfg->coherent_walk) {
dma = dma_map_single(dev, table, size, DMA_TO_DEVICE);
if (dma_mapping_error(dev, dma))
goto out_free;
From: Benjamin Li <[email protected]>
[ Upstream commit 8f1ba8b0ee2679f0b3d22d2a5c1bc70c436fd872 ]
An SMD capture from the downstream prima driver on WCN3680B shows the
following command sequence for connected scans:
- init_scan_req
- start_scan_req, channel 1
- end_scan_req, channel 1
- start_scan_req, channel 2
- ...
- end_scan_req, channel 3
- finish_scan_req
- init_scan_req
- start_scan_req, channel 4
- ...
- end_scan_req, channel 6
- finish_scan_req
- ...
- end_scan_req, channel 165
- finish_scan_req
Upstream currently never calls wcn36xx_smd_end_scan, and in some cases[1]
still sends finish_scan_req twice in a row or before init_scan_req. A
typical connected scan looks like this:
- init_scan_req
- start_scan_req, channel 1
- finish_scan_req
- init_scan_req
- start_scan_req, channel 2
- ...
- start_scan_req, channel 165
- finish_scan_req
- finish_scan_req
This patch cleans up scanning so that init/finish and start/end are always
paired together and correctly nested.
- init_scan_req
- start_scan_req, channel 1
- end_scan_req, channel 1
- finish_scan_req
- init_scan_req
- start_scan_req, channel 2
- end_scan_req, channel 2
- ...
- start_scan_req, channel 165
- end_scan_req, channel 165
- finish_scan_req
Note that upstream will not do batching of 3 active-probe scans before
returning to the operating channel, and this patch does not change that.
To match downstream in this aspect, adjust IEEE80211_PROBE_DELAY and/or
the 125ms max off-channel time in ieee80211_scan_state_decision.
[1]: commit d195d7aac09b ("wcn36xx: Ensure finish scan is not requested
before start scan") addressed one case of finish_scan_req being sent
without a preceding init_scan_req (the case of the operating channel
coinciding with the first scan channel); two other cases are:
1) if SW scan is started and aborted immediately, without scanning any
channels, we send a finish_scan_req without ever sending init_scan_req,
and
2) as SW scan logic always returns us to the operating channel before
calling wcn36xx_sw_scan_complete, finish_scan_req is always sent twice
at the end of a SW scan
Fixes: 8e84c2582169 ("wcn36xx: mac80211 driver for Qualcomm WCN3660/WCN3680 hardware")
Signed-off-by: Benjamin Li <[email protected]>
Tested-by: Bryan O'Donoghue <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/wcn36xx/main.c | 34 +++++++++++++++++-----
drivers/net/wireless/ath/wcn36xx/smd.c | 4 +++
drivers/net/wireless/ath/wcn36xx/wcn36xx.h | 1 +
3 files changed, 32 insertions(+), 7 deletions(-)
diff --git a/drivers/net/wireless/ath/wcn36xx/main.c b/drivers/net/wireless/ath/wcn36xx/main.c
index 629ddfd74da1a..9aaf6f7473333 100644
--- a/drivers/net/wireless/ath/wcn36xx/main.c
+++ b/drivers/net/wireless/ath/wcn36xx/main.c
@@ -397,6 +397,7 @@ static void wcn36xx_change_opchannel(struct wcn36xx *wcn, int ch)
static int wcn36xx_config(struct ieee80211_hw *hw, u32 changed)
{
struct wcn36xx *wcn = hw->priv;
+ int ret;
wcn36xx_dbg(WCN36XX_DBG_MAC, "mac config changed 0x%08x\n", changed);
@@ -412,17 +413,31 @@ static int wcn36xx_config(struct ieee80211_hw *hw, u32 changed)
* want to receive/transmit regular data packets, then
* simply stop the scan session and exit PS mode.
*/
- wcn36xx_smd_finish_scan(wcn, HAL_SYS_MODE_SCAN,
- wcn->sw_scan_vif);
- wcn->sw_scan_channel = 0;
+ if (wcn->sw_scan_channel)
+ wcn36xx_smd_end_scan(wcn, wcn->sw_scan_channel);
+ if (wcn->sw_scan_init) {
+ wcn36xx_smd_finish_scan(wcn, HAL_SYS_MODE_SCAN,
+ wcn->sw_scan_vif);
+ }
} else if (wcn->sw_scan) {
/* A scan is ongoing, do not change the operating
* channel, but start a scan session on the channel.
*/
- wcn36xx_smd_init_scan(wcn, HAL_SYS_MODE_SCAN,
- wcn->sw_scan_vif);
+ if (wcn->sw_scan_channel)
+ wcn36xx_smd_end_scan(wcn, wcn->sw_scan_channel);
+ if (!wcn->sw_scan_init) {
+ /* This can fail if we are unable to notify the
+ * operating channel.
+ */
+ ret = wcn36xx_smd_init_scan(wcn,
+ HAL_SYS_MODE_SCAN,
+ wcn->sw_scan_vif);
+ if (ret) {
+ mutex_unlock(&wcn->conf_mutex);
+ return -EIO;
+ }
+ }
wcn36xx_smd_start_scan(wcn, ch);
- wcn->sw_scan_channel = ch;
} else {
wcn36xx_change_opchannel(wcn, ch);
}
@@ -709,7 +724,12 @@ static void wcn36xx_sw_scan_complete(struct ieee80211_hw *hw,
struct wcn36xx *wcn = hw->priv;
/* ensure that any scan session is finished */
- wcn36xx_smd_finish_scan(wcn, HAL_SYS_MODE_SCAN, wcn->sw_scan_vif);
+ if (wcn->sw_scan_channel)
+ wcn36xx_smd_end_scan(wcn, wcn->sw_scan_channel);
+ if (wcn->sw_scan_init) {
+ wcn36xx_smd_finish_scan(wcn, HAL_SYS_MODE_SCAN,
+ wcn->sw_scan_vif);
+ }
wcn->sw_scan = false;
wcn->sw_scan_opchannel = 0;
}
diff --git a/drivers/net/wireless/ath/wcn36xx/smd.c b/drivers/net/wireless/ath/wcn36xx/smd.c
index 3793907ace92e..ad312e17f7a3c 100644
--- a/drivers/net/wireless/ath/wcn36xx/smd.c
+++ b/drivers/net/wireless/ath/wcn36xx/smd.c
@@ -730,6 +730,7 @@ int wcn36xx_smd_init_scan(struct wcn36xx *wcn, enum wcn36xx_hal_sys_mode mode,
wcn36xx_err("hal_init_scan response failed err=%d\n", ret);
goto out;
}
+ wcn->sw_scan_init = true;
out:
mutex_unlock(&wcn->hal_mutex);
return ret;
@@ -760,6 +761,7 @@ int wcn36xx_smd_start_scan(struct wcn36xx *wcn, u8 scan_channel)
wcn36xx_err("hal_start_scan response failed err=%d\n", ret);
goto out;
}
+ wcn->sw_scan_channel = scan_channel;
out:
mutex_unlock(&wcn->hal_mutex);
return ret;
@@ -790,6 +792,7 @@ int wcn36xx_smd_end_scan(struct wcn36xx *wcn, u8 scan_channel)
wcn36xx_err("hal_end_scan response failed err=%d\n", ret);
goto out;
}
+ wcn->sw_scan_channel = 0;
out:
mutex_unlock(&wcn->hal_mutex);
return ret;
@@ -831,6 +834,7 @@ int wcn36xx_smd_finish_scan(struct wcn36xx *wcn,
wcn36xx_err("hal_finish_scan response failed err=%d\n", ret);
goto out;
}
+ wcn->sw_scan_init = false;
out:
mutex_unlock(&wcn->hal_mutex);
return ret;
diff --git a/drivers/net/wireless/ath/wcn36xx/wcn36xx.h b/drivers/net/wireless/ath/wcn36xx/wcn36xx.h
index 9b4dee2fc6483..5c40d0bdee245 100644
--- a/drivers/net/wireless/ath/wcn36xx/wcn36xx.h
+++ b/drivers/net/wireless/ath/wcn36xx/wcn36xx.h
@@ -231,6 +231,7 @@ struct wcn36xx {
struct cfg80211_scan_request *scan_req;
bool sw_scan;
u8 sw_scan_opchannel;
+ bool sw_scan_init;
u8 sw_scan_channel;
struct ieee80211_vif *sw_scan_vif;
struct mutex scan_lock;
--
2.34.1
From: Bryan O'Donoghue <[email protected]>
[ Upstream commit ed04ea76e69e7194f7489cebe23a32a68f39218d ]
When deiniting the DXE hardware we should reset the block to ensure there
is no spurious DMA write transaction from the downstream WCNSS to upstream
MSM at a skbuff address we will have released.
Fixes: 8e84c2582169 ("wcn36xx: mac80211 driver for Qualcomm WCN3660/WCN3680 hardware")
Signed-off-by: Bryan O'Donoghue <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/wcn36xx/dxe.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/net/wireless/ath/wcn36xx/dxe.c b/drivers/net/wireless/ath/wcn36xx/dxe.c
index b117d8a0f446f..6c62ffc799a2b 100644
--- a/drivers/net/wireless/ath/wcn36xx/dxe.c
+++ b/drivers/net/wireless/ath/wcn36xx/dxe.c
@@ -997,6 +997,8 @@ out_err_txh_ch:
void wcn36xx_dxe_deinit(struct wcn36xx *wcn)
{
+ int reg_data = 0;
+
/* Disable channel interrupts */
wcn36xx_dxe_disable_ch_int(wcn, WCN36XX_INT_MASK_CHAN_RX_H);
wcn36xx_dxe_disable_ch_int(wcn, WCN36XX_INT_MASK_CHAN_RX_L);
@@ -1012,6 +1014,10 @@ void wcn36xx_dxe_deinit(struct wcn36xx *wcn)
wcn->tx_ack_skb = NULL;
}
+ /* Put the DXE block into reset before freeing memory */
+ reg_data = WCN36XX_DXE_REG_RESET;
+ wcn36xx_dxe_write_register(wcn, WCN36XX_DXE_REG_CSR_RESET, reg_data);
+
wcn36xx_dxe_ch_free_skbs(wcn, &wcn->dxe_rx_l_ch);
wcn36xx_dxe_ch_free_skbs(wcn, &wcn->dxe_rx_h_ch);
--
2.34.1
From: Sven Eckelmann <[email protected]>
[ Upstream commit 086c921a354089f209318501038d43c98d3f409f ]
Some ETSI countries have a small overlap in the wireless-regdb with an ETSI
channel (5590-5650). A good example is Australia:
country AU: DFS-ETSI
(2400 - 2483.5 @ 40), (36)
(5150 - 5250 @ 80), (23), NO-OUTDOOR, AUTO-BW
(5250 - 5350 @ 80), (20), NO-OUTDOOR, AUTO-BW, DFS
(5470 - 5600 @ 80), (27), DFS
(5650 - 5730 @ 80), (27), DFS
(5730 - 5850 @ 80), (36)
(57000 - 66000 @ 2160), (43), NO-OUTDOOR
If the firmware (or the BDF) is shipped with these rules then there is only
a 10 MHz overlap with the weather radar:
* below: 5470 - 5590
* weather radar: 5590 - 5600
* above: (none for the rule "5470 - 5600 @ 80")
There are several wrong assumption in the ath11k code:
* there is always a valid range below the weather radar
(actually: there could be no range below the weather radar range OR range
could be smaller than 20 MHz)
* intersected range in the weather radar range is valid
(actually: the range could be smaller than 20 MHz)
* range above weather radar is either empty or valid
(actually: the range could be smaller than 20 MHz)
These wrong assumption will lead in this example to a rule
(5590 - 5600 @ 20), (N/A, 27), (600000 ms), DFS, AUTO-BW
which is invalid according to is_valid_reg_rule() because the freq_diff is
only 10 MHz but the max_bandwidth is set to 20 MHz. Which results in a
rejection like:
WARNING: at backports-20210222_001-4.4.60-b157d2276/net/wireless/reg.c:3984
[...]
Call trace:
[<ffffffbffc3d2e50>] reg_get_max_bandwidth+0x300/0x3a8 [cfg80211]
[<ffffffbffc3d3d0c>] regulatory_set_wiphy_regd_sync+0x3c/0x98 [cfg80211]
[<ffffffbffc651598>] ath11k_regd_update+0x1a8/0x210 [ath11k]
[<ffffffbffc652108>] ath11k_regd_update_work+0x18/0x20 [ath11k]
[<ffffffc0000a93e0>] process_one_work+0x1f8/0x340
[<ffffffc0000a9784>] worker_thread+0x25c/0x448
[<ffffffc0000aedc8>] kthread+0xd0/0xd8
[<ffffffc000085550>] ret_from_fork+0x10/0x40
ath11k c000000.wifi: failed to perform regd update : -22
Invalid regulatory domain detected
To avoid this, the algorithm has to be changed slightly. Instead of
splitting a rule which overlaps with the weather radar range into 3 pieces
and accepting the first two parts blindly, it must actually be checked for
each piece whether it is a valid range. And only if it is valid, add it to
the output array.
When these checks are in place, the processed rules for AU would end up as
country AU: DFS-ETSI
(2400 - 2483 @ 40), (N/A, 36), (N/A)
(5150 - 5250 @ 80), (6, 23), (N/A), NO-OUTDOOR, AUTO-BW
(5250 - 5350 @ 80), (6, 20), (0 ms), NO-OUTDOOR, DFS, AUTO-BW
(5470 - 5590 @ 80), (6, 27), (0 ms), DFS, AUTO-BW
(5650 - 5730 @ 80), (6, 27), (0 ms), DFS, AUTO-BW
(5730 - 5850 @ 80), (6, 36), (N/A), AUTO-BW
and will be accepted by the wireless regulatory code.
Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Signed-off-by: Sven Eckelmann <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/ath11k/reg.c | 103 ++++++++++++++------------
1 file changed, 56 insertions(+), 47 deletions(-)
diff --git a/drivers/net/wireless/ath/ath11k/reg.c b/drivers/net/wireless/ath/ath11k/reg.c
index b8f9f34408879..e34311516b958 100644
--- a/drivers/net/wireless/ath/ath11k/reg.c
+++ b/drivers/net/wireless/ath/ath11k/reg.c
@@ -456,6 +456,9 @@ ath11k_reg_adjust_bw(u16 start_freq, u16 end_freq, u16 max_bw)
{
u16 bw;
+ if (end_freq <= start_freq)
+ return 0;
+
bw = end_freq - start_freq;
bw = min_t(u16, bw, max_bw);
@@ -463,8 +466,10 @@ ath11k_reg_adjust_bw(u16 start_freq, u16 end_freq, u16 max_bw)
bw = 80;
else if (bw >= 40 && bw < 80)
bw = 40;
- else if (bw < 40)
+ else if (bw >= 20 && bw < 40)
bw = 20;
+ else
+ bw = 0;
return bw;
}
@@ -488,73 +493,77 @@ ath11k_reg_update_weather_radar_band(struct ath11k_base *ab,
struct cur_reg_rule *reg_rule,
u8 *rule_idx, u32 flags, u16 max_bw)
{
+ u32 start_freq;
u32 end_freq;
u16 bw;
u8 i;
i = *rule_idx;
+ /* there might be situations when even the input rule must be dropped */
+ i--;
+
+ /* frequencies below weather radar */
bw = ath11k_reg_adjust_bw(reg_rule->start_freq,
ETSI_WEATHER_RADAR_BAND_LOW, max_bw);
+ if (bw > 0) {
+ i++;
- ath11k_reg_update_rule(regd->reg_rules + i, reg_rule->start_freq,
- ETSI_WEATHER_RADAR_BAND_LOW, bw,
- reg_rule->ant_gain, reg_rule->reg_power,
- flags);
+ ath11k_reg_update_rule(regd->reg_rules + i,
+ reg_rule->start_freq,
+ ETSI_WEATHER_RADAR_BAND_LOW, bw,
+ reg_rule->ant_gain, reg_rule->reg_power,
+ flags);
- ath11k_dbg(ab, ATH11K_DBG_REG,
- "\t%d. (%d - %d @ %d) (%d, %d) (%d ms) (FLAGS %d)\n",
- i + 1, reg_rule->start_freq, ETSI_WEATHER_RADAR_BAND_LOW,
- bw, reg_rule->ant_gain, reg_rule->reg_power,
- regd->reg_rules[i].dfs_cac_ms,
- flags);
-
- if (reg_rule->end_freq > ETSI_WEATHER_RADAR_BAND_HIGH)
- end_freq = ETSI_WEATHER_RADAR_BAND_HIGH;
- else
- end_freq = reg_rule->end_freq;
+ ath11k_dbg(ab, ATH11K_DBG_REG,
+ "\t%d. (%d - %d @ %d) (%d, %d) (%d ms) (FLAGS %d)\n",
+ i + 1, reg_rule->start_freq,
+ ETSI_WEATHER_RADAR_BAND_LOW, bw, reg_rule->ant_gain,
+ reg_rule->reg_power, regd->reg_rules[i].dfs_cac_ms,
+ flags);
+ }
- bw = ath11k_reg_adjust_bw(ETSI_WEATHER_RADAR_BAND_LOW, end_freq,
- max_bw);
+ /* weather radar frequencies */
+ start_freq = max_t(u32, reg_rule->start_freq,
+ ETSI_WEATHER_RADAR_BAND_LOW);
+ end_freq = min_t(u32, reg_rule->end_freq, ETSI_WEATHER_RADAR_BAND_HIGH);
- i++;
+ bw = ath11k_reg_adjust_bw(start_freq, end_freq, max_bw);
+ if (bw > 0) {
+ i++;
- ath11k_reg_update_rule(regd->reg_rules + i,
- ETSI_WEATHER_RADAR_BAND_LOW, end_freq, bw,
- reg_rule->ant_gain, reg_rule->reg_power,
- flags);
+ ath11k_reg_update_rule(regd->reg_rules + i, start_freq,
+ end_freq, bw, reg_rule->ant_gain,
+ reg_rule->reg_power, flags);
- regd->reg_rules[i].dfs_cac_ms = ETSI_WEATHER_RADAR_BAND_CAC_TIMEOUT;
+ regd->reg_rules[i].dfs_cac_ms = ETSI_WEATHER_RADAR_BAND_CAC_TIMEOUT;
- ath11k_dbg(ab, ATH11K_DBG_REG,
- "\t%d. (%d - %d @ %d) (%d, %d) (%d ms) (FLAGS %d)\n",
- i + 1, ETSI_WEATHER_RADAR_BAND_LOW, end_freq,
- bw, reg_rule->ant_gain, reg_rule->reg_power,
- regd->reg_rules[i].dfs_cac_ms,
- flags);
-
- if (end_freq == reg_rule->end_freq) {
- regd->n_reg_rules--;
- *rule_idx = i;
- return;
+ ath11k_dbg(ab, ATH11K_DBG_REG,
+ "\t%d. (%d - %d @ %d) (%d, %d) (%d ms) (FLAGS %d)\n",
+ i + 1, start_freq, end_freq, bw,
+ reg_rule->ant_gain, reg_rule->reg_power,
+ regd->reg_rules[i].dfs_cac_ms, flags);
}
+ /* frequencies above weather radar */
bw = ath11k_reg_adjust_bw(ETSI_WEATHER_RADAR_BAND_HIGH,
reg_rule->end_freq, max_bw);
+ if (bw > 0) {
+ i++;
- i++;
-
- ath11k_reg_update_rule(regd->reg_rules + i, ETSI_WEATHER_RADAR_BAND_HIGH,
- reg_rule->end_freq, bw,
- reg_rule->ant_gain, reg_rule->reg_power,
- flags);
+ ath11k_reg_update_rule(regd->reg_rules + i,
+ ETSI_WEATHER_RADAR_BAND_HIGH,
+ reg_rule->end_freq, bw,
+ reg_rule->ant_gain, reg_rule->reg_power,
+ flags);
- ath11k_dbg(ab, ATH11K_DBG_REG,
- "\t%d. (%d - %d @ %d) (%d, %d) (%d ms) (FLAGS %d)\n",
- i + 1, ETSI_WEATHER_RADAR_BAND_HIGH, reg_rule->end_freq,
- bw, reg_rule->ant_gain, reg_rule->reg_power,
- regd->reg_rules[i].dfs_cac_ms,
- flags);
+ ath11k_dbg(ab, ATH11K_DBG_REG,
+ "\t%d. (%d - %d @ %d) (%d, %d) (%d ms) (FLAGS %d)\n",
+ i + 1, ETSI_WEATHER_RADAR_BAND_HIGH,
+ reg_rule->end_freq, bw, reg_rule->ant_gain,
+ reg_rule->reg_power, regd->reg_rules[i].dfs_cac_ms,
+ flags);
+ }
*rule_idx = i;
}
--
2.34.1
From: Tsuchiya Yuto <[email protected]>
[ Upstream commit c10bcb13462e9cf43111d17f1e08b4bb4d4401b0 ]
This is almost a BUG report with RFC patch that just avoids kernel
oopses. Thus, prefixed with [BUG][RFC].
Here is the kernel log after running `v4l2-compliance -d /dev/video4`
with this patch applied:
kern :err : [25507.580392] atomisp-isp2 0000:00:03.0: can't change power state from D3cold to D0 (config space inaccessible)
kern :warn : [25507.592343] isys dma store at addr(0xcd408) val(0)
kern :err : [25507.592995] atomisp-isp2 0000:00:03.0: atomisp_queryctl(): asd is NULL, device is ATOMISP ISP ACC
kern :err : [25507.593685] atomisp-isp2 0000:00:03.0: atomisp_g_input(): asd is NULL, device is ATOMISP ISP ACC
kern :err : [25507.593719] atomisp-isp2 0000:00:03.0: atomisp_g_parm(): asd is NULL, device is ATOMISP ISP ACC
kern :err : [25507.593727] atomisp-isp2 0000:00:03.0: atomisp_queryctl(): asd is NULL, device is ATOMISP ISP ACC
[omitting 42 same messages]
kern :err : [25507.593976] atomisp-isp2 0000:00:03.0: atomisp_queryctl(): asd is NULL, device is ATOMISP ISP ACC
kern :err : [25507.594191] atomisp-isp2 0000:00:03.0: atomisp_g_input(): asd is NULL, device is ATOMISP ISP ACC
kern :err : [25507.594449] atomisp-isp2 0000:00:03.0: atomisp_queryctl(): asd is NULL, device is ATOMISP ISP ACC
[omitting 43 same messages]
kern :err : [25507.594756] atomisp-isp2 0000:00:03.0: atomisp_queryctl(): asd is NULL, device is ATOMISP ISP ACC
kern :err : [25507.594779] atomisp-isp2 0000:00:03.0: atomisp_g_ctrl(): asd is NULL, device is ATOMISP ISP ACC
kern :err : [25507.594787] atomisp-isp2 0000:00:03.0: atomisp_s_ctrl(): asd is NULL, device is ATOMISP ISP ACC
kern :err : [25507.594803] atomisp-isp2 0000:00:03.0: atomisp_camera_g_ext_ctrls(): asd is NULL, device is ATOMISP ISP ACC
kern :err : [25507.594880] atomisp-isp2 0000:00:03.0: atomisp_enum_fmt_cap(): asd is NULL, device is ATOMISP ISP ACC
kern :err : [25507.594915] atomisp-isp2 0000:00:03.0: atomisp_g_parm(): asd is NULL, device is ATOMISP ISP ACC
kern :err : [25507.595058] atomisp-isp2 0000:00:03.0: atomisp_try_fmt(): asd is NULL, device is ATOMISP ISP ACC
kern :err : [25507.595089] atomisp-isp2 0000:00:03.0: atomisp_set_fmt(): asd is NULL, device is ATOMISP ISP ACC
kern :err : [25507.595124] atomisp-isp2 0000:00:03.0: atomisp_set_fmt(): asd is NULL, device is ATOMISP ISP ACC
kern :err : [25507.595221] atomisp-isp2 0000:00:03.0: atomisp_set_fmt(): asd is NULL, device is ATOMISP ISP ACC
kern :err : [25507.595241] atomisp-isp2 0000:00:03.0: atomisp_set_fmt(): asd is NULL, device is ATOMISP ISP ACC
kern :err : [25507.601571] atomisp-isp2 0000:00:03.0: can't change power state from D3cold to D0 (config space inaccessible)
kern :warn : [25507.607496] isys dma store at addr(0xcd408) val(0)
kern :err : [25507.608604] atomisp-isp2 0000:00:03.0: atomisp_queryctl(): asd is NULL, device is ATOMISP ISP ACC
kern :err : [25507.611988] atomisp-isp2 0000:00:03.0: can't change power state from D3cold to D0 (config space inaccessible)
kern :warn : [25507.617420] isys dma store at addr(0xcd408) val(0)
kern :err : [25507.618429] atomisp-isp2 0000:00:03.0: atomisp_queryctl(): asd is NULL, device is ATOMISP ISP ACC
kern :err : [25507.618811] atomisp-isp2 0000:00:03.0: atomisp_g_parm(): asd is NULL, device is ATOMISP ISP ACC
kern :err : [25507.622193] atomisp-isp2 0000:00:03.0: can't change power state from D3cold to D0 (config space inaccessible)
kern :warn : [25507.627355] isys dma store at addr(0xcd408) val(0)
kern :err : [25507.628391] atomisp-isp2 0000:00:03.0: atomisp_queryctl(): asd is NULL, device is ATOMISP ISP ACC
kern :err : [25507.631143] atomisp-isp2 0000:00:03.0: can't change power state from D3cold to D0 (config space inaccessible)
kern :warn : [25507.635813] isys dma store at addr(0xcd408) val(0)
kern :err : [25507.636489] atomisp-isp2 0000:00:03.0: atomisp_queryctl(): asd is NULL, device is ATOMISP ISP ACC
kern :err : [25507.636504] atomisp-isp2 0000:00:03.0: atomisp_s_input(): asd is NULL, device is ATOMISP ISP ACC
kern :err : [25507.636516] atomisp-isp2 0000:00:03.0: atomisp_set_fmt(): asd is NULL, device is ATOMISP ISP ACC
kern :err : [25507.639111] atomisp-isp2 0000:00:03.0: can't change power state from D3cold to D0 (config space inaccessible)
kern :warn : [25507.646152] isys dma store at addr(0xcd408) val(0)
kern :err : [25507.646831] atomisp-isp2 0000:00:03.0: atomisp_queryctl(): asd is NULL, device is ATOMISP ISP ACC
kern :err : [25507.646847] atomisp-isp2 0000:00:03.0: atomisp_s_input(): asd is NULL, device is ATOMISP ISP ACC
kern :err : [25507.650079] atomisp-isp2 0000:00:03.0: can't change power state from D3cold to D0 (config space inaccessible)
kern :warn : [25507.657476] isys dma store at addr(0xcd408) val(0)
kern :err : [25507.658741] atomisp-isp2 0000:00:03.0: atomisp_queryctl(): asd is NULL, device is ATOMISP ISP ACC
kern :err : [25507.658759] atomisp-isp2 0000:00:03.0: atomisp_s_input(): asd is NULL, device is ATOMISP ISP ACC
kern :err : [25507.658771] atomisp-isp2 0000:00:03.0: atomisp_set_fmt(): asd is NULL, device is ATOMISP ISP ACC
kern :err : [25507.660959] atomisp-isp2 0000:00:03.0: can't change power state from D3cold to D0 (config space inaccessible)
kern :warn : [25507.666665] isys dma store at addr(0xcd408) val(0)
kern :err : [25507.667397] atomisp-isp2 0000:00:03.0: atomisp_queryctl(): asd is NULL, device is ATOMISP ISP ACC
[mchehab: fix coding style]
Signed-off-by: Tsuchiya Yuto <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../staging/media/atomisp/pci/atomisp_cmd.c | 73 +++++++++++++++
.../staging/media/atomisp/pci/atomisp_fops.c | 6 ++
.../staging/media/atomisp/pci/atomisp_ioctl.c | 90 +++++++++++++++++++
3 files changed, 169 insertions(+)
diff --git a/drivers/staging/media/atomisp/pci/atomisp_cmd.c b/drivers/staging/media/atomisp/pci/atomisp_cmd.c
index 21cd03f06291d..90d50a693ce57 100644
--- a/drivers/staging/media/atomisp/pci/atomisp_cmd.c
+++ b/drivers/staging/media/atomisp/pci/atomisp_cmd.c
@@ -1715,6 +1715,12 @@ void atomisp_wdt_refresh_pipe(struct atomisp_video_pipe *pipe,
{
unsigned long next;
+ if (!pipe->asd) {
+ dev_err(pipe->isp->dev, "%s(): asd is NULL, device is %s\n",
+ __func__, pipe->vdev.name);
+ return;
+ }
+
if (delay != ATOMISP_WDT_KEEP_CURRENT_DELAY)
pipe->wdt_duration = delay;
@@ -1777,6 +1783,12 @@ void atomisp_wdt_refresh(struct atomisp_sub_device *asd, unsigned int delay)
/* ISP2401 */
void atomisp_wdt_stop_pipe(struct atomisp_video_pipe *pipe, bool sync)
{
+ if (!pipe->asd) {
+ dev_err(pipe->isp->dev, "%s(): asd is NULL, device is %s\n",
+ __func__, pipe->vdev.name);
+ return;
+ }
+
if (!atomisp_is_wdt_running(pipe))
return;
@@ -4109,6 +4121,12 @@ void atomisp_handle_parameter_and_buffer(struct atomisp_video_pipe *pipe)
unsigned long irqflags;
bool need_to_enqueue_buffer = false;
+ if (!asd) {
+ dev_err(pipe->isp->dev, "%s(): asd is NULL, device is %s\n",
+ __func__, pipe->vdev.name);
+ return;
+ }
+
if (atomisp_is_vf_pipe(pipe))
return;
@@ -4196,6 +4214,12 @@ int atomisp_set_parameters(struct video_device *vdev,
struct atomisp_css_params *css_param = &asd->params.css_param;
int ret;
+ if (!asd) {
+ dev_err(pipe->isp->dev, "%s(): asd is NULL, device is %s\n",
+ __func__, vdev->name);
+ return -EINVAL;
+ }
+
if (!asd->stream_env[ATOMISP_INPUT_STREAM_GENERAL].stream) {
dev_err(asd->isp->dev, "%s: internal error!\n", __func__);
return -EINVAL;
@@ -4856,6 +4880,12 @@ int atomisp_try_fmt(struct video_device *vdev, struct v4l2_format *f,
int source_pad = atomisp_subdev_source_pad(vdev);
int ret;
+ if (!asd) {
+ dev_err(isp->dev, "%s(): asd is NULL, device is %s\n",
+ __func__, vdev->name);
+ return -EINVAL;
+ }
+
if (!isp->inputs[asd->input_curr].camera)
return -EINVAL;
@@ -5202,6 +5232,12 @@ static int atomisp_set_fmt_to_isp(struct video_device *vdev,
const struct atomisp_in_fmt_conv *fc;
int ret, i;
+ if (!asd) {
+ dev_err(isp->dev, "%s(): asd is NULL, device is %s\n",
+ __func__, vdev->name);
+ return -EINVAL;
+ }
+
v4l2_fh_init(&fh.vfh, vdev);
isp_sink_crop = atomisp_subdev_get_rect(
@@ -5513,6 +5549,7 @@ static int atomisp_set_fmt_to_snr(struct video_device *vdev,
unsigned int dvs_env_w, unsigned int dvs_env_h)
{
struct atomisp_sub_device *asd = atomisp_to_video_pipe(vdev)->asd;
+ struct atomisp_video_pipe *pipe = atomisp_to_video_pipe(vdev);
const struct atomisp_format_bridge *format;
struct v4l2_subdev_pad_config pad_cfg;
struct v4l2_subdev_format vformat = {
@@ -5528,6 +5565,12 @@ static int atomisp_set_fmt_to_snr(struct video_device *vdev,
struct v4l2_subdev_fh fh;
int ret;
+ if (!asd) {
+ dev_err(pipe->isp->dev, "%s(): asd is NULL, device is %s\n",
+ __func__, vdev->name);
+ return -EINVAL;
+ }
+
v4l2_fh_init(&fh.vfh, vdev);
stream_index = atomisp_source_pad_to_stream_id(asd, source_pad);
@@ -5618,6 +5661,12 @@ int atomisp_set_fmt(struct video_device *vdev, struct v4l2_format *f)
struct v4l2_subdev_fh fh;
int ret;
+ if (!asd) {
+ dev_err(isp->dev, "%s(): asd is NULL, device is %s\n",
+ __func__, vdev->name);
+ return -EINVAL;
+ }
+
if (source_pad >= ATOMISP_SUBDEV_PADS_NUM)
return -EINVAL;
@@ -6051,6 +6100,12 @@ int atomisp_set_fmt_file(struct video_device *vdev, struct v4l2_format *f)
struct v4l2_subdev_fh fh;
int ret;
+ if (!asd) {
+ dev_err(isp->dev, "%s(): asd is NULL, device is %s\n",
+ __func__, vdev->name);
+ return -EINVAL;
+ }
+
v4l2_fh_init(&fh.vfh, vdev);
dev_dbg(isp->dev, "setting fmt %ux%u 0x%x for file inject\n",
@@ -6375,6 +6430,12 @@ bool atomisp_is_vf_pipe(struct atomisp_video_pipe *pipe)
{
struct atomisp_sub_device *asd = pipe->asd;
+ if (!asd) {
+ dev_err(pipe->isp->dev, "%s(): asd is NULL, device is %s\n",
+ __func__, pipe->vdev.name);
+ return false;
+ }
+
if (pipe == &asd->video_out_vf)
return true;
@@ -6588,6 +6649,12 @@ static int atomisp_get_pipe_id(struct atomisp_video_pipe *pipe)
{
struct atomisp_sub_device *asd = pipe->asd;
+ if (!asd) {
+ dev_err(pipe->isp->dev, "%s(): asd is NULL, device is %s\n",
+ __func__, pipe->vdev.name);
+ return -EINVAL;
+ }
+
if (ATOMISP_USE_YUVPP(asd)) {
return IA_CSS_PIPE_ID_YUVPP;
} else if (asd->vfpp->val == ATOMISP_VFPP_DISABLE_SCALER) {
@@ -6625,6 +6692,12 @@ int atomisp_get_invalid_frame_num(struct video_device *vdev,
struct ia_css_pipe_info p_info;
int ret;
+ if (!asd) {
+ dev_err(pipe->isp->dev, "%s(): asd is NULL, device is %s\n",
+ __func__, vdev->name);
+ return -EINVAL;
+ }
+
if (asd->isp->inputs[asd->input_curr].camera_caps->
sensor[asd->sensor_curr].stream_num > 1) {
/* External ISP */
diff --git a/drivers/staging/media/atomisp/pci/atomisp_fops.c b/drivers/staging/media/atomisp/pci/atomisp_fops.c
index f1e6b25978534..52d24c1ca0d64 100644
--- a/drivers/staging/media/atomisp/pci/atomisp_fops.c
+++ b/drivers/staging/media/atomisp/pci/atomisp_fops.c
@@ -1171,6 +1171,12 @@ static int atomisp_mmap(struct file *file, struct vm_area_struct *vma)
u32 origin_size, new_size;
int ret;
+ if (!asd) {
+ dev_err(isp->dev, "%s(): asd is NULL, device is %s\n",
+ __func__, vdev->name);
+ return -EINVAL;
+ }
+
if (!(vma->vm_flags & (VM_WRITE | VM_READ)))
return -EACCES;
diff --git a/drivers/staging/media/atomisp/pci/atomisp_ioctl.c b/drivers/staging/media/atomisp/pci/atomisp_ioctl.c
index 9da82855552de..35717a91cbd15 100644
--- a/drivers/staging/media/atomisp/pci/atomisp_ioctl.c
+++ b/drivers/staging/media/atomisp/pci/atomisp_ioctl.c
@@ -646,6 +646,12 @@ static int atomisp_g_input(struct file *file, void *fh, unsigned int *input)
struct atomisp_device *isp = video_get_drvdata(vdev);
struct atomisp_sub_device *asd = atomisp_to_video_pipe(vdev)->asd;
+ if (!asd) {
+ dev_err(isp->dev, "%s(): asd is NULL, device is %s\n",
+ __func__, vdev->name);
+ return -EINVAL;
+ }
+
rt_mutex_lock(&isp->mutex);
*input = asd->input_curr;
rt_mutex_unlock(&isp->mutex);
@@ -665,6 +671,12 @@ static int atomisp_s_input(struct file *file, void *fh, unsigned int input)
struct v4l2_subdev *motor;
int ret;
+ if (!asd) {
+ dev_err(isp->dev, "%s(): asd is NULL, device is %s\n",
+ __func__, vdev->name);
+ return -EINVAL;
+ }
+
rt_mutex_lock(&isp->mutex);
if (input >= ATOM_ISP_MAX_INPUTS || input >= isp->input_cnt) {
dev_dbg(isp->dev, "input_cnt: %d\n", isp->input_cnt);
@@ -765,6 +777,12 @@ static int atomisp_enum_fmt_cap(struct file *file, void *fh,
unsigned int i, fi = 0;
int rval;
+ if (!asd) {
+ dev_err(isp->dev, "%s(): asd is NULL, device is %s\n",
+ __func__, vdev->name);
+ return -EINVAL;
+ }
+
rt_mutex_lock(&isp->mutex);
rval = v4l2_subdev_call(isp->inputs[asd->input_curr].camera, pad,
enum_mbus_code, NULL, &code);
@@ -1027,6 +1045,12 @@ int __atomisp_reqbufs(struct file *file, void *fh,
u16 stream_id = atomisp_source_pad_to_stream_id(asd, source_pad);
int ret = 0, i = 0;
+ if (!asd) {
+ dev_err(pipe->isp->dev, "%s(): asd is NULL, device is %s\n",
+ __func__, vdev->name);
+ return -EINVAL;
+ }
+
if (req->count == 0) {
mutex_lock(&pipe->capq.vb_lock);
if (!list_empty(&pipe->capq.stream))
@@ -1154,6 +1178,12 @@ static int atomisp_qbuf(struct file *file, void *fh, struct v4l2_buffer *buf)
u32 pgnr;
int ret = 0;
+ if (!asd) {
+ dev_err(isp->dev, "%s(): asd is NULL, device is %s\n",
+ __func__, vdev->name);
+ return -EINVAL;
+ }
+
rt_mutex_lock(&isp->mutex);
if (isp->isp_fatal_error) {
ret = -EIO;
@@ -1389,6 +1419,12 @@ static int atomisp_dqbuf(struct file *file, void *fh, struct v4l2_buffer *buf)
struct atomisp_device *isp = video_get_drvdata(vdev);
int ret = 0;
+ if (!asd) {
+ dev_err(isp->dev, "%s(): asd is NULL, device is %s\n",
+ __func__, vdev->name);
+ return -EINVAL;
+ }
+
rt_mutex_lock(&isp->mutex);
if (isp->isp_fatal_error) {
@@ -1640,6 +1676,12 @@ static int atomisp_streamon(struct file *file, void *fh,
int ret = 0;
unsigned long irqflags;
+ if (!asd) {
+ dev_err(isp->dev, "%s(): asd is NULL, device is %s\n",
+ __func__, vdev->name);
+ return -EINVAL;
+ }
+
dev_dbg(isp->dev, "Start stream on pad %d for asd%d\n",
atomisp_subdev_source_pad(vdev), asd->index);
@@ -1901,6 +1943,12 @@ int __atomisp_streamoff(struct file *file, void *fh, enum v4l2_buf_type type)
unsigned long flags;
bool first_streamoff = false;
+ if (!asd) {
+ dev_err(isp->dev, "%s(): asd is NULL, device is %s\n",
+ __func__, vdev->name);
+ return -EINVAL;
+ }
+
dev_dbg(isp->dev, "Stop stream on pad %d for asd%d\n",
atomisp_subdev_source_pad(vdev), asd->index);
@@ -2150,6 +2198,12 @@ static int atomisp_g_ctrl(struct file *file, void *fh,
struct atomisp_device *isp = video_get_drvdata(vdev);
int i, ret = -EINVAL;
+ if (!asd) {
+ dev_err(isp->dev, "%s(): asd is NULL, device is %s\n",
+ __func__, vdev->name);
+ return -EINVAL;
+ }
+
for (i = 0; i < ctrls_num; i++) {
if (ci_v4l2_controls[i].id == control->id) {
ret = 0;
@@ -2229,6 +2283,12 @@ static int atomisp_s_ctrl(struct file *file, void *fh,
struct atomisp_device *isp = video_get_drvdata(vdev);
int i, ret = -EINVAL;
+ if (!asd) {
+ dev_err(isp->dev, "%s(): asd is NULL, device is %s\n",
+ __func__, vdev->name);
+ return -EINVAL;
+ }
+
for (i = 0; i < ctrls_num; i++) {
if (ci_v4l2_controls[i].id == control->id) {
ret = 0;
@@ -2310,6 +2370,12 @@ static int atomisp_queryctl(struct file *file, void *fh,
struct atomisp_sub_device *asd = atomisp_to_video_pipe(vdev)->asd;
struct atomisp_device *isp = video_get_drvdata(vdev);
+ if (!asd) {
+ dev_err(isp->dev, "%s(): asd is NULL, device is %s\n",
+ __func__, vdev->name);
+ return -EINVAL;
+ }
+
switch (qc->id) {
case V4L2_CID_FOCUS_ABSOLUTE:
case V4L2_CID_FOCUS_RELATIVE:
@@ -2355,6 +2421,12 @@ static int atomisp_camera_g_ext_ctrls(struct file *file, void *fh,
int i;
int ret = 0;
+ if (!asd) {
+ dev_err(isp->dev, "%s(): asd is NULL, device is %s\n",
+ __func__, vdev->name);
+ return -EINVAL;
+ }
+
if (!IS_ISP2401)
motor = isp->inputs[asd->input_curr].motor;
else
@@ -2466,6 +2538,12 @@ static int atomisp_camera_s_ext_ctrls(struct file *file, void *fh,
int i;
int ret = 0;
+ if (!asd) {
+ dev_err(isp->dev, "%s(): asd is NULL, device is %s\n",
+ __func__, vdev->name);
+ return -EINVAL;
+ }
+
if (!IS_ISP2401)
motor = isp->inputs[asd->input_curr].motor;
else
@@ -2591,6 +2669,12 @@ static int atomisp_g_parm(struct file *file, void *fh,
struct atomisp_sub_device *asd = atomisp_to_video_pipe(vdev)->asd;
struct atomisp_device *isp = video_get_drvdata(vdev);
+ if (!asd) {
+ dev_err(isp->dev, "%s(): asd is NULL, device is %s\n",
+ __func__, vdev->name);
+ return -EINVAL;
+ }
+
if (parm->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) {
dev_err(isp->dev, "unsupported v4l2 buf type\n");
return -EINVAL;
@@ -2613,6 +2697,12 @@ static int atomisp_s_parm(struct file *file, void *fh,
int rval;
int fps;
+ if (!asd) {
+ dev_err(isp->dev, "%s(): asd is NULL, device is %s\n",
+ __func__, vdev->name);
+ return -EINVAL;
+ }
+
if (parm->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) {
dev_err(isp->dev, "unsupported v4l2 buf type\n");
return -EINVAL;
--
2.34.1
From: Hou Tao <[email protected]>
[ Upstream commit 866de407444398bc8140ea70de1dba5f91cc34ac ]
BPF_LOG_KERNEL is only used internally, so disallow bpf_btf_load()
to set log level as BPF_LOG_KERNEL. The same checking has already
been done in bpf_check(), so factor out a helper to check the
validity of log attributes and use it in both places.
Fixes: 8580ac9404f6 ("bpf: Process in-kernel BTF")
Signed-off-by: Hou Tao <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Acked-by: Martin KaFai Lau <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
include/linux/bpf_verifier.h | 7 +++++++
kernel/bpf/btf.c | 3 +--
kernel/bpf/verifier.c | 6 +++---
3 files changed, 11 insertions(+), 5 deletions(-)
diff --git a/include/linux/bpf_verifier.h b/include/linux/bpf_verifier.h
index 6e330ff2f28df..391bc1480dfb1 100644
--- a/include/linux/bpf_verifier.h
+++ b/include/linux/bpf_verifier.h
@@ -367,6 +367,13 @@ static inline bool bpf_verifier_log_needed(const struct bpf_verifier_log *log)
log->level == BPF_LOG_KERNEL);
}
+static inline bool
+bpf_verifier_log_attr_valid(const struct bpf_verifier_log *log)
+{
+ return log->len_total >= 128 && log->len_total <= UINT_MAX >> 2 &&
+ log->level && log->ubuf && !(log->level & ~BPF_LOG_MASK);
+}
+
#define BPF_MAX_SUBPROGS 256
struct bpf_subprog_info {
diff --git a/kernel/bpf/btf.c b/kernel/bpf/btf.c
index 72534a6f4b96e..dc497eaf22663 100644
--- a/kernel/bpf/btf.c
+++ b/kernel/bpf/btf.c
@@ -4135,8 +4135,7 @@ static struct btf *btf_parse(void __user *btf_data, u32 btf_data_size,
log->len_total = log_size;
/* log attributes have to be sane */
- if (log->len_total < 128 || log->len_total > UINT_MAX >> 2 ||
- !log->level || !log->ubuf) {
+ if (!bpf_verifier_log_attr_valid(log)) {
err = -EINVAL;
goto errout;
}
diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c
index b43c9de34a2c2..c623c3e549210 100644
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -12349,11 +12349,11 @@ int bpf_check(struct bpf_prog **prog, union bpf_attr *attr,
log->ubuf = (char __user *) (unsigned long) attr->log_buf;
log->len_total = attr->log_size;
- ret = -EINVAL;
/* log attributes have to be sane */
- if (log->len_total < 128 || log->len_total > UINT_MAX >> 2 ||
- !log->level || !log->ubuf || log->level & ~BPF_LOG_MASK)
+ if (!bpf_verifier_log_attr_valid(log)) {
+ ret = -EINVAL;
goto err_unlock;
+ }
}
if (IS_ERR(btf_vmlinux)) {
--
2.34.1
From: Bryan O'Donoghue <[email protected]>
[ Upstream commit 588b45c88ae130fe373a8c50edaf54735c3f4fe3 ]
Firmware can trigger a missed beacon indication, this is not the same as a
lost signal.
Flag to Linux the missed beacon and let the WiFi stack decide for itself if
the link is up or down by sending its own probe to determine this.
We should only be signalling the link is lost when the firmware indicates
Fixes: 8e84c2582169 ("wcn36xx: mac80211 driver for Qualcomm WCN3660/WCN3680 hardware")
Signed-off-by: Bryan O'Donoghue <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/wcn36xx/smd.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ath/wcn36xx/smd.c b/drivers/net/wireless/ath/wcn36xx/smd.c
index ad312e17f7a3c..7f00cb6f5e16b 100644
--- a/drivers/net/wireless/ath/wcn36xx/smd.c
+++ b/drivers/net/wireless/ath/wcn36xx/smd.c
@@ -2607,7 +2607,7 @@ static int wcn36xx_smd_missed_beacon_ind(struct wcn36xx *wcn,
wcn36xx_dbg(WCN36XX_DBG_HAL, "beacon missed bss_index %d\n",
tmp->bss_index);
vif = wcn36xx_priv_to_vif(tmp);
- ieee80211_connection_loss(vif);
+ ieee80211_beacon_loss(vif);
}
return 0;
}
@@ -2622,7 +2622,7 @@ static int wcn36xx_smd_missed_beacon_ind(struct wcn36xx *wcn,
wcn36xx_dbg(WCN36XX_DBG_HAL, "beacon missed bss_index %d\n",
rsp->bss_index);
vif = wcn36xx_priv_to_vif(tmp);
- ieee80211_connection_loss(vif);
+ ieee80211_beacon_loss(vif);
return 0;
}
}
--
2.34.1
From: Dillon Min <[email protected]>
[ Upstream commit b046049e59dca5e5830dc75ed16acf7657a95161 ]
Since the compatible string defined from ilitek,ili9341.yaml is
"st,sf-tc240t-9370-t", "ilitek,ili9341"
so, append "ilitek,ili9341" to avoid the below dtbs_check warning.
arch/arm/boot/dts/stm32f429-disco.dt.yaml: display@1: compatible:
['st,sf-tc240t-9370-t'] is too short
Fixes: a726e2f000ec ("ARM: dts: stm32: enable ltdc binding with ili9341, gyro l3gd20 on stm32429-disco board")
Signed-off-by: Dillon Min <[email protected]>
Reported-by: kernel test robot <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Signed-off-by: Alexandre Torgue <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/stm32f429-disco.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/stm32f429-disco.dts b/arch/arm/boot/dts/stm32f429-disco.dts
index 075ac57d0bf4a..6435e099c6326 100644
--- a/arch/arm/boot/dts/stm32f429-disco.dts
+++ b/arch/arm/boot/dts/stm32f429-disco.dts
@@ -192,7 +192,7 @@
display: display@1{
/* Connect panel-ilitek-9341 to ltdc */
- compatible = "st,sf-tc240t-9370-t";
+ compatible = "st,sf-tc240t-9370-t", "ilitek,ili9341";
reg = <1>;
spi-3wire;
spi-max-frequency = <10000000>;
--
2.34.1
From: Daniel Borkmann <[email protected]>
[ Upstream commit e60b0d12a95dcf16a63225cead4541567f5cb517 ]
If we ever get to a point again where we convert a bogus looking <ptr>_or_null
typed register containing a non-zero fixed or variable offset, then lets not
reset these bounds to zero since they are not and also don't promote the register
to a <ptr> type, but instead leave it as <ptr>_or_null. Converting to a unknown
register could be an avenue as well, but then if we run into this case it would
allow to leak a kernel pointer this way.
Fixes: f1174f77b50c ("bpf/verifier: rework value tracking")
Signed-off-by: Daniel Borkmann <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/bpf/verifier.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c
index c623c3e549210..015bf2ba4a0b6 100644
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -7725,15 +7725,15 @@ static void mark_ptr_or_null_reg(struct bpf_func_state *state,
{
if (reg_type_may_be_null(reg->type) && reg->id == id &&
!WARN_ON_ONCE(!reg->id)) {
- /* Old offset (both fixed and variable parts) should
- * have been known-zero, because we don't allow pointer
- * arithmetic on pointers that might be NULL.
- */
if (WARN_ON_ONCE(reg->smin_value || reg->smax_value ||
!tnum_equals_const(reg->var_off, 0) ||
reg->off)) {
- __mark_reg_known_zero(reg);
- reg->off = 0;
+ /* Old offset (both fixed and variable parts) should
+ * have been known-zero, because we don't allow pointer
+ * arithmetic on pointers that might be NULL. If we
+ * see this happening, don't convert the register.
+ */
+ return;
}
if (is_null) {
reg->type = SCALAR_VALUE;
--
2.34.1
From: Dan Carpenter <[email protected]>
[ Upstream commit 9371937092d5fd502032c1bb4475b36b39b1f1b3 ]
The "opt" variable is unsigned long but we only copy 4 bytes from
the user so the lower 4 bytes are uninitialized.
I have changed the integer overflow checks from ULONG to UINT as well.
This is a slight API change but I don't expect it to break anything.
Fixes: a7b75c5a8c41 ("net: pass a sockptr_t into ->setsockopt")
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/ax25/af_ax25.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/net/ax25/af_ax25.c b/net/ax25/af_ax25.c
index 22278807b3f36..5e84dce5ff7ae 100644
--- a/net/ax25/af_ax25.c
+++ b/net/ax25/af_ax25.c
@@ -536,7 +536,7 @@ static int ax25_setsockopt(struct socket *sock, int level, int optname,
ax25_cb *ax25;
struct net_device *dev;
char devname[IFNAMSIZ];
- unsigned long opt;
+ unsigned int opt;
int res = 0;
if (level != SOL_AX25)
@@ -568,7 +568,7 @@ static int ax25_setsockopt(struct socket *sock, int level, int optname,
break;
case AX25_T1:
- if (opt < 1 || opt > ULONG_MAX / HZ) {
+ if (opt < 1 || opt > UINT_MAX / HZ) {
res = -EINVAL;
break;
}
@@ -577,7 +577,7 @@ static int ax25_setsockopt(struct socket *sock, int level, int optname,
break;
case AX25_T2:
- if (opt < 1 || opt > ULONG_MAX / HZ) {
+ if (opt < 1 || opt > UINT_MAX / HZ) {
res = -EINVAL;
break;
}
@@ -593,7 +593,7 @@ static int ax25_setsockopt(struct socket *sock, int level, int optname,
break;
case AX25_T3:
- if (opt < 1 || opt > ULONG_MAX / HZ) {
+ if (opt < 1 || opt > UINT_MAX / HZ) {
res = -EINVAL;
break;
}
@@ -601,7 +601,7 @@ static int ax25_setsockopt(struct socket *sock, int level, int optname,
break;
case AX25_IDLE:
- if (opt > ULONG_MAX / (60 * HZ)) {
+ if (opt > UINT_MAX / (60 * HZ)) {
res = -EINVAL;
break;
}
--
2.34.1
From: Lukas Bulwahn <[email protected]>
[ Upstream commit 49f893253ab43566e34332a969324531fea463f6 ]
Commit f37fe2f9987b ("ASoC: uniphier: add support for UniPhier AIO common
driver") adds configs SND_SOC_UNIPHIER_{LD11,PXS2}, which select the
non-existing config SND_SOC_UNIPHIER_AIO_DMA.
Hence, ./scripts/checkkconfigsymbols.py warns:
SND_SOC_UNIPHIER_AIO_DMA
Referencing files: sound/soc/uniphier/Kconfig
Probably, there is actually no further config intended to be selected
here. So, just drop selecting the non-existing config.
Fixes: f37fe2f9987b ("ASoC: uniphier: add support for UniPhier AIO common driver")
Signed-off-by: Lukas Bulwahn <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/uniphier/Kconfig | 2 --
1 file changed, 2 deletions(-)
diff --git a/sound/soc/uniphier/Kconfig b/sound/soc/uniphier/Kconfig
index aa3592ee1358b..ddfa6424c656b 100644
--- a/sound/soc/uniphier/Kconfig
+++ b/sound/soc/uniphier/Kconfig
@@ -23,7 +23,6 @@ config SND_SOC_UNIPHIER_LD11
tristate "UniPhier LD11/LD20 Device Driver"
depends on SND_SOC_UNIPHIER
select SND_SOC_UNIPHIER_AIO
- select SND_SOC_UNIPHIER_AIO_DMA
help
This adds ASoC driver for Socionext UniPhier LD11/LD20
input and output that can be used with other codecs.
@@ -34,7 +33,6 @@ config SND_SOC_UNIPHIER_PXS2
tristate "UniPhier PXs2 Device Driver"
depends on SND_SOC_UNIPHIER
select SND_SOC_UNIPHIER_AIO
- select SND_SOC_UNIPHIER_AIO_DMA
help
This adds ASoC driver for Socionext UniPhier PXs2
input and output that can be used with other codecs.
--
2.34.1
From: José Expósito <[email protected]>
[ Upstream commit aa320fdbbbb482c19100f51461bd0069753ce3d7 ]
The function performs a check on the hdev input parameters, however, it
is used before the check.
Initialize the udev variable after the sanity check to avoid a
possible NULL pointer dereference.
Fixes: 9614219e9310e ("HID: uclogic: Extract tablet parameter discovery into a module")
Addresses-Coverity-ID: 1443763 ("Null pointer dereference")
Signed-off-by: José Expósito <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hid/hid-uclogic-params.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/hid/hid-uclogic-params.c b/drivers/hid/hid-uclogic-params.c
index df12178a80da5..38f9bbad81c17 100644
--- a/drivers/hid/hid-uclogic-params.c
+++ b/drivers/hid/hid-uclogic-params.c
@@ -451,7 +451,7 @@ static int uclogic_params_frame_init_v1_buttonpad(
{
int rc;
bool found = false;
- struct usb_device *usb_dev = hid_to_usb_dev(hdev);
+ struct usb_device *usb_dev;
char *str_buf = NULL;
const size_t str_len = 16;
@@ -461,6 +461,8 @@ static int uclogic_params_frame_init_v1_buttonpad(
goto cleanup;
}
+ usb_dev = hid_to_usb_dev(hdev);
+
/*
* Enable generic button mode
*/
--
2.34.1
From: Dan Carpenter <[email protected]>
[ Upstream commit 2b70d4f9b20635ac328836e50d183632e1930f94 ]
The "opt" variable is a u32, but on some paths only the top bytes
were initialized and the others contained random stack data.
Fixes: a7b75c5a8c41 ("net: pass a sockptr_t into ->setsockopt")
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/bluetooth/l2cap_sock.c | 14 ++++++++------
1 file changed, 8 insertions(+), 6 deletions(-)
diff --git a/net/bluetooth/l2cap_sock.c b/net/bluetooth/l2cap_sock.c
index 251017c69ab7f..d2c6785205992 100644
--- a/net/bluetooth/l2cap_sock.c
+++ b/net/bluetooth/l2cap_sock.c
@@ -903,6 +903,8 @@ static int l2cap_sock_setsockopt(struct socket *sock, int level, int optname,
struct l2cap_conn *conn;
int len, err = 0;
u32 opt;
+ u16 mtu;
+ u8 mode;
BT_DBG("sk %p", sk);
@@ -1085,16 +1087,16 @@ static int l2cap_sock_setsockopt(struct socket *sock, int level, int optname,
break;
}
- if (copy_from_sockptr(&opt, optval, sizeof(u16))) {
+ if (copy_from_sockptr(&mtu, optval, sizeof(u16))) {
err = -EFAULT;
break;
}
if (chan->mode == L2CAP_MODE_EXT_FLOWCTL &&
sk->sk_state == BT_CONNECTED)
- err = l2cap_chan_reconfigure(chan, opt);
+ err = l2cap_chan_reconfigure(chan, mtu);
else
- chan->imtu = opt;
+ chan->imtu = mtu;
break;
@@ -1116,14 +1118,14 @@ static int l2cap_sock_setsockopt(struct socket *sock, int level, int optname,
break;
}
- if (copy_from_sockptr(&opt, optval, sizeof(u8))) {
+ if (copy_from_sockptr(&mode, optval, sizeof(u8))) {
err = -EFAULT;
break;
}
- BT_DBG("opt %u", opt);
+ BT_DBG("mode %u", mode);
- err = l2cap_set_mode(chan, opt);
+ err = l2cap_set_mode(chan, mode);
if (err)
break;
--
2.34.1
From: Marc Kleine-Budde <[email protected]>
[ Upstream commit 370d988cc529598ebaec6487d4f84c2115dc696b ]
In the function softing_startstop() the variable error_reporting is
assigned but not used. The code that uses this variable is commented
out. Its stated that the functionality is not finally verified.
To fix the warning:
| drivers/net/can/softing/softing_fw.c:424:9: error: variable 'error_reporting' set but not used [-Werror,-Wunused-but-set-variable]
remove the comment, activate the code, but add a "0 &&" to the if
expression and rely on the optimizer rather than the preprocessor to
remove the code.
Link: https://lore.kernel.org/all/[email protected]
Fixes: 03fd3cf5a179 ("can: add driver for Softing card")
Cc: Kurt Van Dijck <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/can/softing/softing_fw.c | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/drivers/net/can/softing/softing_fw.c b/drivers/net/can/softing/softing_fw.c
index ccd649a8e37bd..bad69a4abec10 100644
--- a/drivers/net/can/softing/softing_fw.c
+++ b/drivers/net/can/softing/softing_fw.c
@@ -565,18 +565,19 @@ int softing_startstop(struct net_device *dev, int up)
if (ret < 0)
goto failed;
}
- /* enable_error_frame */
- /*
+
+ /* enable_error_frame
+ *
* Error reporting is switched off at the moment since
* the receiving of them is not yet 100% verified
* This should be enabled sooner or later
- *
- if (error_reporting) {
+ */
+ if (0 && error_reporting) {
ret = softing_fct_cmd(card, 51, "enable_error_frame");
if (ret < 0)
goto failed;
}
- */
+
/* initialize interface */
iowrite16(1, &card->dpram[DPRAM_FCT_PARAM + 2]);
iowrite16(1, &card->dpram[DPRAM_FCT_PARAM + 4]);
--
2.34.1
From: Jiasheng Jiang <[email protected]>
[ Upstream commit eec91694f927d1026974444eb6a3adccd4f1cbc2 ]
The return value of dma_set_coherent_mask() is not always 0.
To catch the exception in case that dma is not support the mask.
Fixes: 0a0c3b5a24bd ("Add new uio device for dynamic memory allocation")
Signed-off-by: Jiasheng Jiang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/uio/uio_dmem_genirq.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/uio/uio_dmem_genirq.c b/drivers/uio/uio_dmem_genirq.c
index ec7f66f4555a6..bf39a424ea77d 100644
--- a/drivers/uio/uio_dmem_genirq.c
+++ b/drivers/uio/uio_dmem_genirq.c
@@ -183,7 +183,11 @@ static int uio_dmem_genirq_probe(struct platform_device *pdev)
goto bad0;
}
- dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
+ ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
+ if (ret) {
+ dev_err(&pdev->dev, "DMA enable failed\n");
+ return ret;
+ }
priv->uioinfo = uioinfo;
spin_lock_init(&priv->lock);
--
2.34.1
From: Dominik Brodowski <[email protected]>
[ Upstream commit fbb3485f1f931102d8ba606f1c28123f5b48afa3 ]
We need to set TASK_INTERRUPTIBLE before calling kthread_should_stop().
Otherwise, kthread_stop() might see that the pccardd thread is still
in TASK_RUNNING state and fail to wake it up.
Additionally, we only need to set the state back to TASK_RUNNING if
kthread_should_stop() breaks the loop.
Cc: Greg Kroah-Hartman <[email protected]>
Reported-by: Al Viro <[email protected]>
Reviewed-by: Matthew Wilcox (Oracle) <[email protected]>
Fixes: d3046ba809ce ("pcmcia: fix a boot time warning in pcmcia cs code")
Signed-off-by: Dominik Brodowski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pcmcia/cs.c | 8 +++-----
1 file changed, 3 insertions(+), 5 deletions(-)
diff --git a/drivers/pcmcia/cs.c b/drivers/pcmcia/cs.c
index e211e2619680c..f70197154a362 100644
--- a/drivers/pcmcia/cs.c
+++ b/drivers/pcmcia/cs.c
@@ -666,18 +666,16 @@ static int pccardd(void *__skt)
if (events || sysfs_events)
continue;
+ set_current_state(TASK_INTERRUPTIBLE);
if (kthread_should_stop())
break;
- set_current_state(TASK_INTERRUPTIBLE);
-
schedule();
- /* make sure we are running */
- __set_current_state(TASK_RUNNING);
-
try_to_freeze();
}
+ /* make sure we are running before we exit */
+ __set_current_state(TASK_RUNNING);
/* shut down socket, if a device is still present */
if (skt->state & SOCKET_PRESENT) {
--
2.34.1
From: Robert Hancock <[email protected]>
commit 70f5817deddbc6ef3faa35841cab83c280cc653a upstream.
The driver will not work properly if the TX ring size is set to below
MAX_SKB_FRAGS + 1 since it needs to hold at least one full maximally
fragmented packet in the TX ring. Limit setting the ring size to below
this value.
Fixes: 8b09ca823ffb4 ("net: axienet: Make RX/TX ring sizes configurable")
Signed-off-by: Robert Hancock <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -43,6 +43,7 @@
/* Descriptors defines for Tx and Rx DMA */
#define TX_BD_NUM_DEFAULT 64
#define RX_BD_NUM_DEFAULT 1024
+#define TX_BD_NUM_MIN (MAX_SKB_FRAGS + 1)
#define TX_BD_NUM_MAX 4096
#define RX_BD_NUM_MAX 4096
@@ -1373,7 +1374,8 @@ static int axienet_ethtools_set_ringpara
if (ering->rx_pending > RX_BD_NUM_MAX ||
ering->rx_mini_pending ||
ering->rx_jumbo_pending ||
- ering->rx_pending > TX_BD_NUM_MAX)
+ ering->tx_pending < TX_BD_NUM_MIN ||
+ ering->tx_pending > TX_BD_NUM_MAX)
return -EINVAL;
if (netif_running(ndev))
From: Reiji Watanabe <[email protected]>
[ Upstream commit f0616abd4e67143b45b04b565839148458857347 ]
Currently, clear_page() uses DC ZVA instruction unconditionally. But it
should make sure that DCZID_EL0.DZP, which indicates whether or not use
of DC ZVA instruction is prohibited, is zero when using the instruction.
Use STNP instead when DCZID_EL0.DZP == 1.
Fixes: f27bb139c387 ("arm64: Miscellaneous library functions")
Signed-off-by: Reiji Watanabe <[email protected]>
Reviewed-by: Robin Murphy <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/lib/clear_page.S | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm64/lib/clear_page.S b/arch/arm64/lib/clear_page.S
index b84b179edba3a..1fd5d790ab800 100644
--- a/arch/arm64/lib/clear_page.S
+++ b/arch/arm64/lib/clear_page.S
@@ -16,6 +16,7 @@
*/
SYM_FUNC_START_PI(clear_page)
mrs x1, dczid_el0
+ tbnz x1, #4, 2f /* Branch if DC ZVA is prohibited */
and w1, w1, #0xf
mov x2, #4
lsl x1, x2, x1
@@ -25,5 +26,14 @@ SYM_FUNC_START_PI(clear_page)
tst x0, #(PAGE_SIZE - 1)
b.ne 1b
ret
+
+2: stnp xzr, xzr, [x0]
+ stnp xzr, xzr, [x0, #16]
+ stnp xzr, xzr, [x0, #32]
+ stnp xzr, xzr, [x0, #48]
+ add x0, x0, #64
+ tst x0, #(PAGE_SIZE - 1)
+ b.ne 2b
+ ret
SYM_FUNC_END_PI(clear_page)
EXPORT_SYMBOL(clear_page)
--
2.34.1
From: Nicolas Toromanoff <[email protected]>
[ Upstream commit d703c7a994ee34b7fa89baf21631fca0aa9f17fc ]
Don't erase key:
If key is erased before the crypto_finalize_.*_request() call, some
pending process will run with a key={ 0 }.
Moreover if the key is reset at end of request, it breaks xts chaining
mode, as for last xts block (in case input len is not a multiple of
block) a new AES request is started without calling again set_key().
Fixes: 9e054ec21ef8 ("crypto: stm32 - Support for STM32 CRYP crypto module")
Signed-off-by: Nicolas Toromanoff <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/crypto/stm32/stm32-cryp.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/crypto/stm32/stm32-cryp.c b/drivers/crypto/stm32/stm32-cryp.c
index d13b262b36252..e2bcc4f98b0ae 100644
--- a/drivers/crypto/stm32/stm32-cryp.c
+++ b/drivers/crypto/stm32/stm32-cryp.c
@@ -674,8 +674,6 @@ static void stm32_cryp_finish_req(struct stm32_cryp *cryp, int err)
else
crypto_finalize_skcipher_request(cryp->engine, cryp->req,
err);
-
- memset(cryp->ctx->key, 0, cryp->ctx->keylen);
}
static int stm32_cryp_cpu_start(struct stm32_cryp *cryp)
--
2.34.1
From: Robert Hancock <[email protected]>
commit 95978df6fa328df619c15312e65ece469c2be2d2 upstream.
This driver was missing some required memory barriers:
Use dma_rmb to ensure we see all updates to the descriptor after we see
that an entry has been completed.
Use wmb and rmb to avoid stale descriptor status between the TX path and
TX complete IRQ path.
Fixes: 8a3b7a252dca9 ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Robert Hancock <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -632,6 +632,8 @@ static int axienet_free_tx_chain(struct
if (nr_bds == -1 && !(status & XAXIDMA_BD_STS_COMPLETE_MASK))
break;
+ /* Ensure we see complete descriptor update */
+ dma_rmb();
phys = desc_get_phys_addr(lp, cur_p);
dma_unmap_single(ndev->dev.parent, phys,
(cur_p->cntrl & XAXIDMA_BD_CTRL_LENGTH_MASK),
@@ -645,8 +647,10 @@ static int axienet_free_tx_chain(struct
cur_p->app1 = 0;
cur_p->app2 = 0;
cur_p->app4 = 0;
- cur_p->status = 0;
cur_p->skb = NULL;
+ /* ensure our transmit path and device don't prematurely see status cleared */
+ wmb();
+ cur_p->status = 0;
if (sizep)
*sizep += status & XAXIDMA_BD_STS_ACTUAL_LEN_MASK;
@@ -704,6 +708,9 @@ static inline int axienet_check_tx_bd_sp
int num_frag)
{
struct axidma_bd *cur_p;
+
+ /* Ensure we see all descriptor updates from device or TX IRQ path */
+ rmb();
cur_p = &lp->tx_bd_v[(lp->tx_bd_tail + num_frag) % lp->tx_bd_num];
if (cur_p->status & XAXIDMA_BD_STS_ALL_MASK)
return NETDEV_TX_BUSY;
@@ -843,6 +850,8 @@ static void axienet_recv(struct net_devi
tail_p = lp->rx_bd_p + sizeof(*lp->rx_bd_v) * lp->rx_bd_ci;
+ /* Ensure we see complete descriptor update */
+ dma_rmb();
phys = desc_get_phys_addr(lp, cur_p);
dma_unmap_single(ndev->dev.parent, phys, lp->max_frm_size,
DMA_FROM_DEVICE);
From: Rameshkumar Sundaram <[email protected]>
[ Upstream commit ba53ee7f7f38cf0592b8be1dcdabaf8f7535f8c1 ]
frag_timer will be created & initialized for stations when
they associate and will be deleted during every key installation
while flushing old fragments.
For AP interface self peer will be created and Group keys
will be installed for this peer, but there will be no real
Station entry & hence frag_timer won't be created and
initialized, deleting such uninitialized kernel timers causes below
warnings and backtraces printed with CONFIG_DEBUG_OBJECTS_TIMERS
enabled.
[ 177.828008] ODEBUG: assert_init not available (active state 0) object type: timer_list hint: 0x0
[ 177.836833] WARNING: CPU: 3 PID: 188 at lib/debugobjects.c:508 debug_print_object+0xb0/0xf0
[ 177.845185] Modules linked in: ath11k_pci ath11k qmi_helpers qrtr_mhi qrtr ns mhi
[ 177.852679] CPU: 3 PID: 188 Comm: hostapd Not tainted 5.14.0-rc3-32919-g4034139e1838-dirty #14
[ 177.865805] pstate: 60000005 (nZCv daif -PAN -UAO -TCO BTYPE=--)
[ 177.871804] pc : debug_print_object+0xb0/0xf0
[ 177.876155] lr : debug_print_object+0xb0/0xf0
[ 177.880505] sp : ffffffc01169b5a0
[ 177.883810] x29: ffffffc01169b5a0 x28: ffffff80081c2320 x27: ffffff80081c4078
[ 177.890942] x26: ffffff8003fe8f28 x25: ffffff8003de9890 x24: ffffffc01134d738
[ 177.898075] x23: ffffffc010948f20 x22: ffffffc010b2d2e0 x21: ffffffc01169b628
[ 177.905206] x20: ffffffc01134d700 x19: ffffffc010c80d98 x18: 00000000000003f6
[ 177.912339] x17: 203a657079742074 x16: 63656a626f202930 x15: 0000000000000152
[ 177.919471] x14: 0000000000000152 x13: 00000000ffffffea x12: ffffffc010d732e0
[ 177.926603] x11: 0000000000000003 x10: ffffffc010d432a0 x9 : ffffffc010d432f8
[ 177.933735] x8 : 000000000002ffe8 x7 : c0000000ffffdfff x6 : 0000000000000001
[ 177.940866] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 00000000ffffffff
[ 177.947997] x2 : ffffffc010c93240 x1 : ffffff80023624c0 x0 : 0000000000000054
[ 177.955130] Call trace:
[ 177.957567] debug_print_object+0xb0/0xf0
[ 177.961570] debug_object_assert_init+0x124/0x178
[ 177.966269] try_to_del_timer_sync+0x1c/0x70
[ 177.970536] del_timer_sync+0x30/0x50
[ 177.974192] ath11k_peer_frags_flush+0x34/0x68 [ath11k]
[ 177.979439] ath11k_mac_op_set_key+0x1e4/0x338 [ath11k]
[ 177.984673] ieee80211_key_enable_hw_accel+0xc8/0x3d0
[ 177.989722] ieee80211_key_replace+0x360/0x740
[ 177.994160] ieee80211_key_link+0x16c/0x210
[ 177.998337] ieee80211_add_key+0x138/0x338
[ 178.002426] nl80211_new_key+0xfc/0x258
[ 178.006257] genl_family_rcv_msg_doit.isra.17+0xd8/0x120
[ 178.011565] genl_rcv_msg+0xd8/0x1c8
[ 178.015134] netlink_rcv_skb+0x38/0xf8
[ 178.018877] genl_rcv+0x34/0x48
[ 178.022012] netlink_unicast+0x174/0x230
[ 178.025928] netlink_sendmsg+0x188/0x388
[ 178.029845] ____sys_sendmsg+0x218/0x250
[ 178.033763] ___sys_sendmsg+0x68/0x90
[ 178.037418] __sys_sendmsg+0x44/0x88
[ 178.040988] __arm64_sys_sendmsg+0x20/0x28
[ 178.045077] invoke_syscall.constprop.5+0x54/0xe0
[ 178.049776] do_el0_svc+0x74/0xc0
[ 178.053084] el0_svc+0x10/0x18
[ 178.056133] el0t_64_sync_handler+0x88/0xb0
[ 178.060310] el0t_64_sync+0x148/0x14c
[ 178.063966] ---[ end trace 8a5cf0bf9d34a058 ]---
Add changes to not to delete frag timer for peers during
group key installation.
Tested on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-01092-QCAHKSWPL_SILICONZ-1
Fixes: c3944a562102 ("ath11k: Clear the fragment cache during key install")
Signed-off-by: Rameshkumar Sundaram <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/ath11k/mac.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
index b4f8494e3c707..835ce805b63ec 100644
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -2531,7 +2531,7 @@ static int ath11k_mac_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
/* flush the fragments cache during key (re)install to
* ensure all frags in the new frag list belong to the same key.
*/
- if (peer && cmd == SET_KEY)
+ if (peer && sta && cmd == SET_KEY)
ath11k_peer_frags_flush(ar, peer);
spin_unlock_bh(&ab->base_lock);
--
2.34.1
From: Robert Hancock <[email protected]>
commit 04cc2da39698efd7eb2e30c112538922d26f848e upstream.
In some cases where the Xilinx Ethernet core was used in 1000Base-X or
SGMII modes, which use the internal PCS/PMA PHY, and the MGT
transceiver clock source for the PCS was not running at the time the
FPGA logic was loaded, the core would come up in a state where the
PCS could not be found on the MDIO bus. To fix this, the Ethernet core
(including the PCS) should be reset after enabling the clocks, prior to
attempting to access the PCS using of_mdio_find_device.
Fixes: 1a02556086fc (net: axienet: Properly handle PCS/PMA PHY for 1000BaseX mode)
Signed-off-by: Robert Hancock <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -2024,6 +2024,11 @@ static int axienet_probe(struct platform
lp->coalesce_count_rx = XAXIDMA_DFT_RX_THRESHOLD;
lp->coalesce_count_tx = XAXIDMA_DFT_TX_THRESHOLD;
+ /* Reset core now that clocks are enabled, prior to accessing MDIO */
+ ret = __axienet_device_reset(lp);
+ if (ret)
+ goto cleanup_clk;
+
lp->phy_node = of_parse_phandle(pdev->dev.of_node, "phy-handle", 0);
if (lp->phy_node) {
ret = axienet_mdio_setup(lp);
From: Luiz Augusto von Dentz <[email protected]>
[ Upstream commit 30d57722732d9736554f85f75f9d7ad5402d192e ]
If user has a set to use SOCK_STREAM the socket would default to
L2CAP_MODE_ERTM which later needs to be adjusted if the destination
address is LE which doesn't support such mode.
Fixes: 15f02b9105625 ("Bluetooth: L2CAP: Add initial code for Enhanced Credit Based Mode")
Signed-off-by: Luiz Augusto von Dentz <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/bluetooth/l2cap_sock.c | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
diff --git a/net/bluetooth/l2cap_sock.c b/net/bluetooth/l2cap_sock.c
index 4574c5cb1b596..251017c69ab7f 100644
--- a/net/bluetooth/l2cap_sock.c
+++ b/net/bluetooth/l2cap_sock.c
@@ -161,7 +161,11 @@ static int l2cap_sock_bind(struct socket *sock, struct sockaddr *addr, int alen)
break;
}
- if (chan->psm && bdaddr_type_is_le(chan->src_type))
+ /* Use L2CAP_MODE_LE_FLOWCTL (CoC) in case of LE address and
+ * L2CAP_MODE_EXT_FLOWCTL (ECRED) has not been set.
+ */
+ if (chan->psm && bdaddr_type_is_le(chan->src_type) &&
+ chan->mode != L2CAP_MODE_EXT_FLOWCTL)
chan->mode = L2CAP_MODE_LE_FLOWCTL;
chan->state = BT_BOUND;
@@ -255,7 +259,11 @@ static int l2cap_sock_connect(struct socket *sock, struct sockaddr *addr,
return -EINVAL;
}
- if (chan->psm && bdaddr_type_is_le(chan->src_type) && !chan->mode)
+ /* Use L2CAP_MODE_LE_FLOWCTL (CoC) in case of LE address and
+ * L2CAP_MODE_EXT_FLOWCTL (ECRED) has not been set.
+ */
+ if (chan->psm && bdaddr_type_is_le(chan->src_type) &&
+ chan->mode != L2CAP_MODE_EXT_FLOWCTL)
chan->mode = L2CAP_MODE_LE_FLOWCTL;
l2cap_sock_init_pid(sk);
--
2.34.1
From: Marijn Suijten <[email protected]>
[ Upstream commit 0a139358548968b2ff308257b4fbeec7badcc3e1 ]
The kernel already provides appropriate primitives to perform endianness
conversion which should be used in favour of manual bit-wrangling.
Signed-off-by: Marijn Suijten <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Reviewed-by: Daniel Thompson <[email protected]>
Signed-off-by: Lee Jones <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/video/backlight/qcom-wled.c | 23 +++++++++++------------
1 file changed, 11 insertions(+), 12 deletions(-)
diff --git a/drivers/video/backlight/qcom-wled.c b/drivers/video/backlight/qcom-wled.c
index 70fcee74866a5..13368044d0a75 100644
--- a/drivers/video/backlight/qcom-wled.c
+++ b/drivers/video/backlight/qcom-wled.c
@@ -231,14 +231,14 @@ struct wled {
static int wled3_set_brightness(struct wled *wled, u16 brightness)
{
int rc, i;
- u8 v[2];
+ __le16 v;
- v[0] = brightness & 0xff;
- v[1] = (brightness >> 8) & 0xf;
+ v = cpu_to_le16(brightness & WLED3_SINK_REG_BRIGHT_MAX);
for (i = 0; i < wled->cfg.num_strings; ++i) {
rc = regmap_bulk_write(wled->regmap, wled->ctrl_addr +
- WLED3_SINK_REG_BRIGHT(i), v, 2);
+ WLED3_SINK_REG_BRIGHT(i),
+ &v, sizeof(v));
if (rc < 0)
return rc;
}
@@ -250,18 +250,18 @@ static int wled4_set_brightness(struct wled *wled, u16 brightness)
{
int rc, i;
u16 low_limit = wled->max_brightness * 4 / 1000;
- u8 v[2];
+ __le16 v;
/* WLED4's lower limit of operation is 0.4% */
if (brightness > 0 && brightness < low_limit)
brightness = low_limit;
- v[0] = brightness & 0xff;
- v[1] = (brightness >> 8) & 0xf;
+ v = cpu_to_le16(brightness & WLED3_SINK_REG_BRIGHT_MAX);
for (i = 0; i < wled->cfg.num_strings; ++i) {
rc = regmap_bulk_write(wled->regmap, wled->sink_addr +
- WLED4_SINK_REG_BRIGHT(i), v, 2);
+ WLED4_SINK_REG_BRIGHT(i),
+ &v, sizeof(v));
if (rc < 0)
return rc;
}
@@ -273,21 +273,20 @@ static int wled5_set_brightness(struct wled *wled, u16 brightness)
{
int rc, offset;
u16 low_limit = wled->max_brightness * 1 / 1000;
- u8 v[2];
+ __le16 v;
/* WLED5's lower limit is 0.1% */
if (brightness < low_limit)
brightness = low_limit;
- v[0] = brightness & 0xff;
- v[1] = (brightness >> 8) & 0x7f;
+ v = cpu_to_le16(brightness & WLED5_SINK_REG_BRIGHT_MAX_15B);
offset = (wled->cfg.mod_sel == MOD_A) ?
WLED5_SINK_REG_MOD_A_BRIGHTNESS_LSB :
WLED5_SINK_REG_MOD_B_BRIGHTNESS_LSB;
rc = regmap_bulk_write(wled->regmap, wled->sink_addr + offset,
- v, 2);
+ &v, sizeof(v));
return rc;
}
--
2.34.1
From: Paul Chaignon <[email protected]>
[ Upstream commit 1a1a0b0364ad291bd8e509da104ac8b5b1afec5d ]
The output of bpftool prog tracelog is currently buffered, which is
inconvenient when piping the output into other commands. A simple
tracelog | grep will typically not display anything. This patch fixes it
by enabling line buffering on stdout for the whole bpftool binary.
Fixes: 30da46b5dc3a ("tools: bpftool: add a command to dump the trace pipe")
Signed-off-by: Quentin Monnet <[email protected]>
Signed-off-by: Paul Chaignon <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/bpf/20211220214528.GA11706@Mem
Signed-off-by: Sasha Levin <[email protected]>
---
tools/bpf/bpftool/main.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/tools/bpf/bpftool/main.c b/tools/bpf/bpftool/main.c
index c58a135dc355e..1854d6b978604 100644
--- a/tools/bpf/bpftool/main.c
+++ b/tools/bpf/bpftool/main.c
@@ -396,6 +396,8 @@ int main(int argc, char **argv)
};
int opt, ret;
+ setlinebuf(stdout);
+
last_do_help = do_help;
pretty_output = false;
json_output = false;
--
2.34.1
From: Nathan Chancellor <[email protected]>
[ Upstream commit 5fe392ff9d1f7254a1fbb3f72d9893088e4d23eb ]
When cross compiling i386_defconfig on an arm64 host with clang, there
are a few instances of '-Waddress-of-packed-member' and
'-Wgnu-variable-sized-type-not-at-end' in arch/x86/boot/compressed/,
which should both be disabled with the cc-disable-warning calls in that
directory's Makefile, which indicates that cc-disable-warning is failing
at the point of testing these flags.
The cc-disable-warning calls fail because at the point that the flags
are tested, KBUILD_CFLAGS has '-march=i386' without $(CLANG_FLAGS),
which has the '--target=' flag to tell clang what architecture it is
targeting. Without the '--target=' flag, the host architecture (arm64)
is used and i386 is not a valid value for '-march=' in that case. This
error can be seen by adding some logging to try-run:
clang-14: error: the clang compiler does not support '-march=i386'
Invoking the compiler has to succeed prior to calling cc-option or
cc-disable-warning in order to accurately test whether or not the flag
is supported; if it doesn't, the requested flag can never be added to
the compiler flags. Move $(CLANG_FLAGS) to the beginning of KBUILD_FLAGS
so that any new flags that might be added in the future can be
accurately tested.
Fixes: d5cbd80e302d ("x86/boot: Add $(CLANG_FLAGS) to compressed KBUILD_CFLAGS")
Signed-off-by: Nathan Chancellor <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/boot/compressed/Makefile | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/arch/x86/boot/compressed/Makefile b/arch/x86/boot/compressed/Makefile
index 6004047d25fdd..bf91e0a36d77f 100644
--- a/arch/x86/boot/compressed/Makefile
+++ b/arch/x86/boot/compressed/Makefile
@@ -28,7 +28,11 @@ KCOV_INSTRUMENT := n
targets := vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma \
vmlinux.bin.xz vmlinux.bin.lzo vmlinux.bin.lz4 vmlinux.bin.zst
-KBUILD_CFLAGS := -m$(BITS) -O2
+# CLANG_FLAGS must come before any cc-disable-warning or cc-option calls in
+# case of cross compiling, as it has the '--target=' flag, which is needed to
+# avoid errors with '-march=i386', and future flags may depend on the target to
+# be valid.
+KBUILD_CFLAGS := -m$(BITS) -O2 $(CLANG_FLAGS)
KBUILD_CFLAGS += -fno-strict-aliasing -fPIE
KBUILD_CFLAGS += -DDISABLE_BRANCH_PROFILING
cflags-$(CONFIG_X86_32) := -march=i386
@@ -46,7 +50,6 @@ KBUILD_CFLAGS += -D__DISABLE_EXPORTS
# Disable relocation relaxation in case the link is not PIE.
KBUILD_CFLAGS += $(call as-option,-Wa$(comma)-mrelax-relocations=no)
KBUILD_CFLAGS += -include $(srctree)/include/linux/hidden.h
-KBUILD_CFLAGS += $(CLANG_FLAGS)
# sev-es.c indirectly inludes inat-table.h which is generated during
# compilation and stored in $(objtree). Add the directory to the includes so
--
2.34.1
From: Panicker Harish <[email protected]>
[ Upstream commit df1e5c51492fd93ffc293acdcc6f00698d19fedc ]
The IBS timers are not stopped properly once BT OFF is triggered.
we could see IBS commands being sent along with version command,
so stopped IBS timers while Bluetooth is off.
Fixes: 3e4be65eb82c ("Bluetooth: hci_qca: Add poweroff support during hci down for wcn3990")
Signed-off-by: Panicker Harish <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/bluetooth/hci_qca.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index 4184faef9f169..4f8a32601c1b6 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -1844,6 +1844,9 @@ static int qca_power_off(struct hci_dev *hdev)
hu->hdev->hw_error = NULL;
hu->hdev->cmd_timeout = NULL;
+ del_timer_sync(&qca->wake_retrans_timer);
+ del_timer_sync(&qca->tx_idle_timer);
+
/* Stop sending shutdown command if soc crashes. */
if (soc_type != QCA_ROME
&& qca->memdump_state == QCA_MEMDUMP_IDLE) {
--
2.34.1
From: Stephen Boyd <[email protected]>
[ Upstream commit 0b665d4af35837f0a0ae63135b84a3c187c1db3b ]
Set the maximum register to 0xff so we can dump the registers for this
device in debugfs.
Fixes: a095f15c00e2 ("drm/bridge: add support for sn65dsi86 bridge driver")
Cc: Rob Clark <[email protected]>
Cc: Douglas Anderson <[email protected]>
Cc: Laurent Pinchart <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
Reviewed-by: Robert Foss <[email protected]>
Signed-off-by: Robert Foss <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/bridge/ti-sn65dsi86.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/gpu/drm/bridge/ti-sn65dsi86.c b/drivers/gpu/drm/bridge/ti-sn65dsi86.c
index ecdf9b01340f5..1a58481037b3f 100644
--- a/drivers/gpu/drm/bridge/ti-sn65dsi86.c
+++ b/drivers/gpu/drm/bridge/ti-sn65dsi86.c
@@ -171,6 +171,7 @@ static const struct regmap_config ti_sn_bridge_regmap_config = {
.val_bits = 8,
.volatile_table = &ti_sn_bridge_volatile_table,
.cache_type = REGCACHE_NONE,
+ .max_register = 0xFF,
};
static void ti_sn_bridge_write_u16(struct ti_sn_bridge *pdata,
--
2.34.1
From: Chengguang Xu <[email protected]>
commit 8d1cfb884e881efd69a3be4ef10772c71cb22216 upstream.
There is a redundant ']' in the name of opcode IB_OPCODE_RC_SEND_MIDDLE,
so just fix it.
Fixes: 8700e3e7c485 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Chengguang Xu <[email protected]>
Acked-by: Zhu Yanjun <[email protected]>
Reviewed-by: Bob Pearson <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/infiniband/sw/rxe/rxe_opcode.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/infiniband/sw/rxe/rxe_opcode.c
+++ b/drivers/infiniband/sw/rxe/rxe_opcode.c
@@ -110,7 +110,7 @@ struct rxe_opcode_info rxe_opcode[RXE_NU
}
},
[IB_OPCODE_RC_SEND_MIDDLE] = {
- .name = "IB_OPCODE_RC_SEND_MIDDLE]",
+ .name = "IB_OPCODE_RC_SEND_MIDDLE",
.mask = RXE_PAYLOAD_MASK | RXE_REQ_MASK | RXE_SEND_MASK
| RXE_MIDDLE_MASK,
.length = RXE_BTH_BYTES,
From: Robert Hancock <[email protected]>
commit 2d19c3fd80178160dd505ccd7fed1643831227a5 upstream.
With previous changes to make the driver handle the TX ring size more
correctly, the default TX ring size of 64 appears to significantly
bottleneck TX performance to around 600 Mbps on a 1 Gbps link on ZynqMP.
Increasing this to 128 seems to bring performance up to near line rate and
shouldn't cause excess bufferbloat (this driver doesn't yet support modern
byte-based queue management).
Fixes: 8a3b7a252dca9 ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Robert Hancock <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -41,7 +41,7 @@
#include "xilinx_axienet.h"
/* Descriptors defines for Tx and Rx DMA */
-#define TX_BD_NUM_DEFAULT 64
+#define TX_BD_NUM_DEFAULT 128
#define RX_BD_NUM_DEFAULT 1024
#define TX_BD_NUM_MIN (MAX_SKB_FRAGS + 1)
#define TX_BD_NUM_MAX 4096
From: Tobias Waldekranz <[email protected]>
commit 3f7c239c7844d2044ed399399d97a5f1c6008e1b upstream.
As reported by sparse: In the remove path, the driver would attempt to
unmap its own priv pointer - instead of the io memory that it mapped
in probe.
Fixes: 9f35a7342cff ("net/fsl: introduce Freescale 10G MDIO driver")
Signed-off-by: Tobias Waldekranz <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/freescale/xgmac_mdio.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/net/ethernet/freescale/xgmac_mdio.c
+++ b/drivers/net/ethernet/freescale/xgmac_mdio.c
@@ -320,9 +320,10 @@ err_ioremap:
static int xgmac_mdio_remove(struct platform_device *pdev)
{
struct mii_bus *bus = platform_get_drvdata(pdev);
+ struct mdio_fsl_priv *priv = bus->priv;
mdiobus_unregister(bus);
- iounmap(bus->priv);
+ iounmap(priv->mdio_base);
mdiobus_free(bus);
return 0;
From: Bart Van Assche <[email protected]>
commit 3369046e54ca8f82e0cb17740643da2d80d3cfa8 upstream.
The SCSI debugfs code supports showing information about pending commands,
including translating SCSI command flags from numeric into text format.
Also convert the SCMD_LAST flag from numeric into text form.
Link: https://lore.kernel.org/r/[email protected]
Fixes: 8930a6c20791 ("scsi: core: add support for request batching")
Signed-off-by: Bart Van Assche <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/scsi_debugfs.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/scsi/scsi_debugfs.c
+++ b/drivers/scsi/scsi_debugfs.c
@@ -10,6 +10,7 @@ static const char *const scsi_cmd_flags[
SCSI_CMD_FLAG_NAME(TAGGED),
SCSI_CMD_FLAG_NAME(UNCHECKED_ISA_DMA),
SCSI_CMD_FLAG_NAME(INITIALIZED),
+ SCSI_CMD_FLAG_NAME(LAST),
};
#undef SCSI_CMD_FLAG_NAME
From: Leon Romanovsky <[email protected]>
commit e9538f8270db24d272659e15841854c7ea11119e upstream.
DEVLINK_CMD_HEALTH_REPORTER_DUMP_GET command doesn't have .doit callback
and has no use in internal_flags at all. Remove this misleading assignment.
Fixes: e44ef4e4516c ("devlink: Hang reporter's dump method on a dumpit cb")
Signed-off-by: Leon Romanovsky <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/core/devlink.c | 2 --
1 file changed, 2 deletions(-)
--- a/net/core/devlink.c
+++ b/net/core/devlink.c
@@ -7852,8 +7852,6 @@ static const struct genl_small_ops devli
GENL_DONT_VALIDATE_DUMP_STRICT,
.dumpit = devlink_nl_cmd_health_reporter_dump_get_dumpit,
.flags = GENL_ADMIN_PERM,
- .internal_flags = DEVLINK_NL_FLAG_NEED_DEVLINK_OR_PORT |
- DEVLINK_NL_FLAG_NO_LOCK,
},
{
.cmd = DEVLINK_CMD_HEALTH_REPORTER_DUMP_CLEAR,
From: Herbert Xu <[email protected]>
[ Upstream commit 3d6b661330a7954d8136df98160d525eb04dcd6a ]
We should not call pm_runtime_resume_and_get where the reference
count is expected to be incremented unconditionally. This patch
reverts these calls to the original unconditional get_sync call.
Reported-by: Heiner Kallweit <[email protected]>
Fixes: 747bf30fd944 ("crypto: stm32/cryp - Fix PM reference leak...")
Fixes: 1cb3ad701970 ("crypto: stm32/hash - Fix PM reference leak...")
Signed-off-by: Herbert Xu <[email protected]>
Acked-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/crypto/stm32/stm32-cryp.c | 3 ++-
drivers/crypto/stm32/stm32-hash.c | 6 +++---
2 files changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/crypto/stm32/stm32-cryp.c b/drivers/crypto/stm32/stm32-cryp.c
index cd57c5bae3ce9..81eb136b6c11d 100644
--- a/drivers/crypto/stm32/stm32-cryp.c
+++ b/drivers/crypto/stm32/stm32-cryp.c
@@ -529,7 +529,8 @@ static int stm32_cryp_hw_init(struct stm32_cryp *cryp)
{
int ret;
u32 cfg, hw_mode;
- pm_runtime_resume_and_get(cryp->dev);
+
+ pm_runtime_get_sync(cryp->dev);
/* Disable interrupt */
stm32_cryp_write(cryp, CRYP_IMSCR, 0);
diff --git a/drivers/crypto/stm32/stm32-hash.c b/drivers/crypto/stm32/stm32-hash.c
index ff5362da118d8..16bb52836b28d 100644
--- a/drivers/crypto/stm32/stm32-hash.c
+++ b/drivers/crypto/stm32/stm32-hash.c
@@ -812,7 +812,7 @@ static void stm32_hash_finish_req(struct ahash_request *req, int err)
static int stm32_hash_hw_init(struct stm32_hash_dev *hdev,
struct stm32_hash_request_ctx *rctx)
{
- pm_runtime_resume_and_get(hdev->dev);
+ pm_runtime_get_sync(hdev->dev);
if (!(HASH_FLAGS_INIT & hdev->flags)) {
stm32_hash_write(hdev, HASH_CR, HASH_CR_INIT);
@@ -961,7 +961,7 @@ static int stm32_hash_export(struct ahash_request *req, void *out)
u32 *preg;
unsigned int i;
- pm_runtime_resume_and_get(hdev->dev);
+ pm_runtime_get_sync(hdev->dev);
while ((stm32_hash_read(hdev, HASH_SR) & HASH_SR_BUSY))
cpu_relax();
@@ -999,7 +999,7 @@ static int stm32_hash_import(struct ahash_request *req, const void *in)
preg = rctx->hw_context;
- pm_runtime_resume_and_get(hdev->dev);
+ pm_runtime_get_sync(hdev->dev);
stm32_hash_write(hdev, HASH_IMR, *preg++);
stm32_hash_write(hdev, HASH_STR, *preg++);
--
2.34.1
From: Jernej Skrabec <[email protected]>
[ Upstream commit 37af43b250fda6162005d47bf7c959c70d52b107 ]
If clocks for some reason couldn't be enabled, probe function returns
immediately, without disabling PM. This obviously leaves PM ref counters
unbalanced.
Fix that by jumping to appropriate error path, so effects of PM functions
are reversed.
Fixes: 775fec69008d ("media: add Rockchip VPU JPEG encoder driver")
Signed-off-by: Jernej Skrabec <[email protected]>
Acked-by: Andrzej Pietrasiewicz <[email protected]>
Reviewed-by: Ezequiel Garcia <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/staging/media/hantro/hantro_drv.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/staging/media/hantro/hantro_drv.c b/drivers/staging/media/hantro/hantro_drv.c
index 7749ca9a8ebbf..bc97ec0a7e4af 100644
--- a/drivers/staging/media/hantro/hantro_drv.c
+++ b/drivers/staging/media/hantro/hantro_drv.c
@@ -829,7 +829,7 @@ static int hantro_probe(struct platform_device *pdev)
ret = clk_bulk_prepare(vpu->variant->num_clocks, vpu->clocks);
if (ret) {
dev_err(&pdev->dev, "Failed to prepare clocks\n");
- return ret;
+ goto err_pm_disable;
}
ret = v4l2_device_register(&pdev->dev, &vpu->v4l2_dev);
@@ -885,6 +885,7 @@ err_v4l2_unreg:
v4l2_device_unregister(&vpu->v4l2_dev);
err_clk_unprepare:
clk_bulk_unprepare(vpu->variant->num_clocks, vpu->clocks);
+err_pm_disable:
pm_runtime_dont_use_autosuspend(vpu->dev);
pm_runtime_disable(vpu->dev);
return ret;
--
2.34.1
From: Robert Hancock <[email protected]>
commit bb193e3db8b86a63f26889c99e14fd30c9ebd72a upstream.
Network driver documentation indicates we should be avoiding returning
NETDEV_TX_BUSY from ndo_start_xmit in normal cases, since it requires
the packets to be requeued. Instead the queue should be stopped after
a packet is added to the TX ring when there may not be enough room for an
additional one. Also, when TX ring entries are completed, we should only
wake the queue if we know there is room for another full maximally
fragmented packet.
Print a warning if there is insufficient space at the start of start_xmit,
since this should no longer happen.
Combined with increasing the default TX ring size (in a subsequent
patch), this appears to recover the TX performance lost by previous changes
to actually manage the TX ring state properly.
Fixes: 8a3b7a252dca9 ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Robert Hancock <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 86 ++++++++++++----------
1 file changed, 47 insertions(+), 39 deletions(-)
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -661,6 +661,32 @@ static int axienet_free_tx_chain(struct
}
/**
+ * axienet_check_tx_bd_space - Checks if a BD/group of BDs are currently busy
+ * @lp: Pointer to the axienet_local structure
+ * @num_frag: The number of BDs to check for
+ *
+ * Return: 0, on success
+ * NETDEV_TX_BUSY, if any of the descriptors are not free
+ *
+ * This function is invoked before BDs are allocated and transmission starts.
+ * This function returns 0 if a BD or group of BDs can be allocated for
+ * transmission. If the BD or any of the BDs are not free the function
+ * returns a busy status. This is invoked from axienet_start_xmit.
+ */
+static inline int axienet_check_tx_bd_space(struct axienet_local *lp,
+ int num_frag)
+{
+ struct axidma_bd *cur_p;
+
+ /* Ensure we see all descriptor updates from device or TX IRQ path */
+ rmb();
+ cur_p = &lp->tx_bd_v[(lp->tx_bd_tail + num_frag) % lp->tx_bd_num];
+ if (cur_p->cntrl)
+ return NETDEV_TX_BUSY;
+ return 0;
+}
+
+/**
* axienet_start_xmit_done - Invoked once a transmit is completed by the
* Axi DMA Tx channel.
* @ndev: Pointer to the net_device structure
@@ -689,33 +715,8 @@ static void axienet_start_xmit_done(stru
/* Matches barrier in axienet_start_xmit */
smp_mb();
- netif_wake_queue(ndev);
-}
-
-/**
- * axienet_check_tx_bd_space - Checks if a BD/group of BDs are currently busy
- * @lp: Pointer to the axienet_local structure
- * @num_frag: The number of BDs to check for
- *
- * Return: 0, on success
- * NETDEV_TX_BUSY, if any of the descriptors are not free
- *
- * This function is invoked before BDs are allocated and transmission starts.
- * This function returns 0 if a BD or group of BDs can be allocated for
- * transmission. If the BD or any of the BDs are not free the function
- * returns a busy status. This is invoked from axienet_start_xmit.
- */
-static inline int axienet_check_tx_bd_space(struct axienet_local *lp,
- int num_frag)
-{
- struct axidma_bd *cur_p;
-
- /* Ensure we see all descriptor updates from device or TX IRQ path */
- rmb();
- cur_p = &lp->tx_bd_v[(lp->tx_bd_tail + num_frag) % lp->tx_bd_num];
- if (cur_p->cntrl)
- return NETDEV_TX_BUSY;
- return 0;
+ if (!axienet_check_tx_bd_space(lp, MAX_SKB_FRAGS + 1))
+ netif_wake_queue(ndev);
}
/**
@@ -748,19 +749,14 @@ axienet_start_xmit(struct sk_buff *skb,
cur_p = &lp->tx_bd_v[lp->tx_bd_tail];
if (axienet_check_tx_bd_space(lp, num_frag + 1)) {
- if (netif_queue_stopped(ndev))
- return NETDEV_TX_BUSY;
-
+ /* Should not happen as last start_xmit call should have
+ * checked for sufficient space and queue should only be
+ * woken when sufficient space is available.
+ */
netif_stop_queue(ndev);
-
- /* Matches barrier in axienet_start_xmit_done */
- smp_mb();
-
- /* Space might have just been freed - check again */
- if (axienet_check_tx_bd_space(lp, num_frag + 1))
- return NETDEV_TX_BUSY;
-
- netif_wake_queue(ndev);
+ if (net_ratelimit())
+ netdev_warn(ndev, "TX ring unexpectedly full\n");
+ return NETDEV_TX_BUSY;
}
if (skb->ip_summed == CHECKSUM_PARTIAL) {
@@ -821,6 +817,18 @@ axienet_start_xmit(struct sk_buff *skb,
if (++lp->tx_bd_tail >= lp->tx_bd_num)
lp->tx_bd_tail = 0;
+ /* Stop queue if next transmit may not have space */
+ if (axienet_check_tx_bd_space(lp, MAX_SKB_FRAGS + 1)) {
+ netif_stop_queue(ndev);
+
+ /* Matches barrier in axienet_start_xmit_done */
+ smp_mb();
+
+ /* Space might have just been freed - check again */
+ if (!axienet_check_tx_bd_space(lp, MAX_SKB_FRAGS + 1))
+ netif_wake_queue(ndev);
+ }
+
return NETDEV_TX_OK;
}
From: Amelie Delaunay <[email protected]>
commit e7f110889a87307fb0fed408a5dee1707796ca04 upstream.
This patch fixes STM32_MDMA_CTBR_TSEL_MASK, which is [5:0], not [7:0].
Fixes: a4ffb13c8946 ("dmaengine: Add STM32 MDMA driver")
Signed-off-by: Amelie Delaunay <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/dma/stm32-mdma.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/dma/stm32-mdma.c
+++ b/drivers/dma/stm32-mdma.c
@@ -184,7 +184,7 @@
#define STM32_MDMA_CTBR(x) (0x68 + 0x40 * (x))
#define STM32_MDMA_CTBR_DBUS BIT(17)
#define STM32_MDMA_CTBR_SBUS BIT(16)
-#define STM32_MDMA_CTBR_TSEL_MASK GENMASK(7, 0)
+#define STM32_MDMA_CTBR_TSEL_MASK GENMASK(5, 0)
#define STM32_MDMA_CTBR_TSEL(n) STM32_MDMA_SET(n, \
STM32_MDMA_CTBR_TSEL_MASK)
From: Sergey Shtylyov <[email protected]>
commit 9deb48b53e7f4056c2eaa2dc2ee3338df619e4f6 upstream.
The driver neglects to check the result of platform_get_irq_optional()'s
call and blithely passes the negative error codes to devm_request_irq()
(which takes *unsigned* IRQ #), causing it to fail with -EINVAL.
Stop calling devm_request_irq() with the invalid IRQ #s.
Fixes: 8562056f267d ("net: bcmgenet: request Wake-on-LAN interrupt")
Signed-off-by: Sergey Shtylyov <[email protected]>
Acked-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/broadcom/genet/bcmgenet.c | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -3962,10 +3962,12 @@ static int bcmgenet_probe(struct platfor
/* Request the WOL interrupt and advertise suspend if available */
priv->wol_irq_disabled = true;
- err = devm_request_irq(&pdev->dev, priv->wol_irq, bcmgenet_wol_isr, 0,
- dev->name, priv);
- if (!err)
- device_set_wakeup_capable(&pdev->dev, 1);
+ if (priv->wol_irq > 0) {
+ err = devm_request_irq(&pdev->dev, priv->wol_irq,
+ bcmgenet_wol_isr, 0, dev->name, priv);
+ if (!err)
+ device_set_wakeup_capable(&pdev->dev, 1);
+ }
/* Set the needed headroom to account for any possible
* features enabling/disabling at runtime
From: Matthias Schiffer <[email protected]>
commit d8adf5b92a9d2205620874d498c39923ecea8749 upstream.
dtx_diff suggests to use <(...) syntax to pipe two inputs into it, but
this has never worked: The /proc/self/fds/... paths passed by the shell
will fail the `[ -f "${dtx}" ] && [ -r "${dtx}" ]` check in compile_to_dts,
but even with this check removed, the function cannot work: hexdump will
eat up the DTB magic, making the subsequent dtc call fail, as a pipe
cannot be rewound.
Simply remove this broken example, as there is already an alternative one
that works fine.
Fixes: 10eadc253ddf ("dtc: create tool to diff device trees")
Signed-off-by: Matthias Schiffer <[email protected]>
Reviewed-by: Frank Rowand <[email protected]>
Signed-off-by: Rob Herring <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
scripts/dtc/dtx_diff | 8 ++------
1 file changed, 2 insertions(+), 6 deletions(-)
--- a/scripts/dtc/dtx_diff
+++ b/scripts/dtc/dtx_diff
@@ -59,12 +59,8 @@ Otherwise DTx is treated as a dts source
or '/include/' to be processed.
If DTx_1 and DTx_2 are in different architectures, then this script
- may not work since \${ARCH} is part of the include path. Two possible
- workarounds:
-
- `basename $0` \\
- <(ARCH=arch_of_dtx_1 `basename $0` DTx_1) \\
- <(ARCH=arch_of_dtx_2 `basename $0` DTx_2)
+ may not work since \${ARCH} is part of the include path. The following
+ workaround can be used:
`basename $0` ARCH=arch_of_dtx_1 DTx_1 >tmp_dtx_1.dts
`basename $0` ARCH=arch_of_dtx_2 DTx_2 >tmp_dtx_2.dts
From: Ye Bin <[email protected]>
commit 8a7518931baa8ea023700987f3db31cb0a80610b upstream.
We do test with inject error fault base on v4.19, after test some time we found
sync /dev/sda always failed.
[root@localhost] sync /dev/sda
sync: error syncing '/dev/sda': Input/output error
scsi log as follows:
[19069.812296] sd 0:0:0:0: [sda] tag#64 Send: scmd 0x00000000d03a0b6b
[19069.812302] sd 0:0:0:0: [sda] tag#64 CDB: Synchronize Cache(10) 35 00 00 00 00 00 00 00 00 00
[19069.812533] sd 0:0:0:0: [sda] tag#64 Done: SUCCESS Result: hostbyte=DID_OK driverbyte=DRIVER_OK
[19069.812536] sd 0:0:0:0: [sda] tag#64 CDB: Synchronize Cache(10) 35 00 00 00 00 00 00 00 00 00
[19069.812539] sd 0:0:0:0: [sda] tag#64 scsi host busy 1 failed 0
[19069.812542] sd 0:0:0:0: Notifying upper driver of completion (result 0)
[19069.812546] sd 0:0:0:0: [sda] tag#64 sd_done: completed 0 of 0 bytes
[19069.812549] sd 0:0:0:0: [sda] tag#64 0 sectors total, 0 bytes done.
[19069.812564] print_req_error: I/O error, dev sda, sector 0
ftrace log as follows:
rep-306069 [007] .... 19654.923315: block_bio_queue: 8,0 FWS 0 + 0 [rep]
rep-306069 [007] .... 19654.923333: block_getrq: 8,0 FWS 0 + 0 [rep]
kworker/7:1H-250 [007] .... 19654.923352: block_rq_issue: 8,0 FF 0 () 0 + 0 [kworker/7:1H]
<idle>-0 [007] ..s. 19654.923562: block_rq_complete: 8,0 FF () 18446744073709551615 + 0 [0]
<idle>-0 [007] d.s. 19654.923576: block_rq_complete: 8,0 WS () 0 + 0 [-5]
As 8d6996630c03 introduce 'fq->rq_status', this data only update when 'flush_rq'
reference count isn't zero. If flush request once failed and record error code
in 'fq->rq_status'. If there is no chance to update 'fq->rq_status',then do fsync
will always failed.
To address this issue reset 'fq->rq_status' after return error code to upper layer.
Fixes: 8d6996630c03("block: fix null pointer dereference in blk_mq_rq_timed_out()")
Signed-off-by: Ye Bin <[email protected]>
Reviewed-by: Ming Lei <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
block/blk-flush.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/block/blk-flush.c
+++ b/block/blk-flush.c
@@ -236,8 +236,10 @@ static void flush_end_io(struct request
* avoiding use-after-free.
*/
WRITE_ONCE(flush_rq->state, MQ_RQ_IDLE);
- if (fq->rq_status != BLK_STS_OK)
+ if (fq->rq_status != BLK_STS_OK) {
error = fq->rq_status;
+ fq->rq_status = BLK_STS_OK;
+ }
if (!q->elevator) {
flush_rq->tag = BLK_MQ_NO_TAG;
From: Wang Hai <[email protected]>
[ Upstream commit 3d5831a40d3464eea158180eb12cbd81c5edfb6a ]
I got a null-ptr-deref report:
BUG: kernel NULL pointer dereference, address: 0000000000000060
...
RIP: 0010:v4l2_ctrl_auto_cluster+0x57/0x270
...
Call Trace:
msi001_probe+0x13b/0x24b [msi001]
spi_probe+0xeb/0x130
...
do_syscall_64+0x35/0xb0
In msi001_probe(), if the creation of control for bandwidth_auto
fails, there will be a null-ptr-deref issue when it is used in
v4l2_ctrl_auto_cluster().
Check dev->hdl.error before v4l2_ctrl_auto_cluster() to fix this bug.
Link: https://lore.kernel.org/linux-media/[email protected]
Fixes: 93203dd6c7c4 ("[media] msi001: Mirics MSi001 silicon tuner driver")
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Wang Hai <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/tuners/msi001.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/media/tuners/msi001.c b/drivers/media/tuners/msi001.c
index 78e6fd600d8ef..44247049a3190 100644
--- a/drivers/media/tuners/msi001.c
+++ b/drivers/media/tuners/msi001.c
@@ -442,6 +442,13 @@ static int msi001_probe(struct spi_device *spi)
V4L2_CID_RF_TUNER_BANDWIDTH_AUTO, 0, 1, 1, 1);
dev->bandwidth = v4l2_ctrl_new_std(&dev->hdl, &msi001_ctrl_ops,
V4L2_CID_RF_TUNER_BANDWIDTH, 200000, 8000000, 1, 200000);
+ if (dev->hdl.error) {
+ ret = dev->hdl.error;
+ dev_err(&spi->dev, "Could not initialize controls\n");
+ /* control init failed, free handler */
+ goto err_ctrl_handler_free;
+ }
+
v4l2_ctrl_auto_cluster(2, &dev->bandwidth_auto, 0, false);
dev->lna_gain = v4l2_ctrl_new_std(&dev->hdl, &msi001_ctrl_ops,
V4L2_CID_RF_TUNER_LNA_GAIN, 0, 1, 1, 1);
--
2.34.1
From: Robert Hancock <[email protected]>
commit 49a8f2bc8d88702783c7e163ec84374e9a022f71 upstream.
The call to of_clk_add_hw_provider was not undone on remove or on probe
failure, which could cause an oops on a subsequent attempt to retrieve
clocks for the removed device. Switch to the devm version of the
function to avoid this issue.
Fixes: 3044a860fd09 ("clk: Add Si5341/Si5340 driver")
Signed-off-by: Robert Hancock <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/clk/clk-si5341.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/clk/clk-si5341.c
+++ b/drivers/clk/clk-si5341.c
@@ -1576,7 +1576,7 @@ static int si5341_probe(struct i2c_clien
clk_prepare(data->clk[i].hw.clk);
}
- err = of_clk_add_hw_provider(client->dev.of_node, of_clk_si5341_get,
+ err = devm_of_clk_add_hw_provider(&client->dev, of_clk_si5341_get,
data);
if (err) {
dev_err(&client->dev, "unable to add clk provider\n");
From: Nicolas Toromanoff <[email protected]>
[ Upstream commit 6c12e742785bf9333faf60bfb96575bdd763448e ]
Delete extraneous lines in probe error handling code: pm was
disabled twice.
Fixes: 65f9aa36ee47 ("crypto: stm32/cryp - Add power management support")
Reported-by: Marek Vasut <[email protected]>
Signed-off-by: Nicolas Toromanoff <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/crypto/stm32/stm32-cryp.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/crypto/stm32/stm32-cryp.c b/drivers/crypto/stm32/stm32-cryp.c
index fd7fb73a4d450..061db567908ae 100644
--- a/drivers/crypto/stm32/stm32-cryp.c
+++ b/drivers/crypto/stm32/stm32-cryp.c
@@ -2134,8 +2134,6 @@ err_engine1:
list_del(&cryp->list);
spin_unlock(&cryp_list.lock);
- pm_runtime_disable(dev);
- pm_runtime_put_noidle(dev);
pm_runtime_disable(dev);
pm_runtime_put_noidle(dev);
--
2.34.1
From: Anders Roxell <[email protected]>
[ Upstream commit a531b0c23c0fc68ad758cc31a74cf612a4dafeb0 ]
Building selftests/clone3 with clang warns about enumeration not handled
in switch case:
clone3.c:54:10: warning: enumeration value 'CLONE3_ARGS_NO_TEST' not handled in switch [-Wswitch]
switch (test_mode) {
^
Add the missing switch case with a comment.
Fixes: 17a810699c18 ("selftests: add tests for clone3()")
Signed-off-by: Anders Roxell <[email protected]>
Acked-by: Christian Brauner <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/clone3/clone3.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/tools/testing/selftests/clone3/clone3.c b/tools/testing/selftests/clone3/clone3.c
index 42be3b9258301..076cf4325f783 100644
--- a/tools/testing/selftests/clone3/clone3.c
+++ b/tools/testing/selftests/clone3/clone3.c
@@ -52,6 +52,12 @@ static int call_clone3(uint64_t flags, size_t size, enum test_mode test_mode)
size = sizeof(struct __clone_args);
switch (test_mode) {
+ case CLONE3_ARGS_NO_TEST:
+ /*
+ * Uses default 'flags' and 'SIGCHLD'
+ * assignment.
+ */
+ break;
case CLONE3_ARGS_ALL_0:
args.flags = 0;
args.exit_signal = 0;
--
2.34.1
From: Robert Hancock <[email protected]>
commit b400c2f4f4c53c86594dd57098970d97d488bfde upstream.
When resetting the device, wait for the PhyRstCmplt bit to be set
in the interrupt status register before continuing initialization, to
ensure that the core is actually ready. When using an external PHY, this
also ensures we do not start trying to access the PHY while it is still
in reset. The PHY reset is initiated by the core reset which is
triggered just above, but remains asserted for 5ms after the core is
reset according to the documentation.
The MgtRdy bit could also be waited for, but unfortunately when using
7-series devices, the bit does not appear to work as documented (it
seems to behave as some sort of link state indication and not just an
indication the transceiver is ready) so it can't really be relied on for
this purpose.
Fixes: 8a3b7a252dca9 ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Robert Hancock <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 10 ++++++++++
1 file changed, 10 insertions(+)
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -516,6 +516,16 @@ static int __axienet_device_reset(struct
return ret;
}
+ /* Wait for PhyRstCmplt bit to be set, indicating the PHY reset has finished */
+ ret = read_poll_timeout(axienet_ior, value,
+ value & XAE_INT_PHYRSTCMPLT_MASK,
+ DELAY_OF_ONE_MILLISEC, 50000, false, lp,
+ XAE_IS_OFFSET);
+ if (ret) {
+ dev_err(lp->dev, "%s: timeout waiting for PhyRstCmplt\n", __func__);
+ return ret;
+ }
+
return 0;
}
From: Tobias Waldekranz <[email protected]>
commit 0d375d610fa96524e2ee2b46830a46a7bfa92a9f upstream.
This block is used in (at least) T1024 and T1040, including their
variants like T1023 etc.
Fixes: d55ad2967d89 ("powerpc/mpc85xx: Create dts components for the FSL QorIQ DPAA FMan")
Signed-off-by: Tobias Waldekranz <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/boot/dts/fsl/qoriq-fman3l-0.dtsi | 2 ++
1 file changed, 2 insertions(+)
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3l-0.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3l-0.dtsi
@@ -79,6 +79,7 @@ fman0: fman@400000 {
#size-cells = <0>;
compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
reg = <0xfc000 0x1000>;
+ fsl,erratum-a009885;
};
xmdio0: mdio@fd000 {
@@ -86,6 +87,7 @@ fman0: fman@400000 {
#size-cells = <0>;
compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
reg = <0xfd000 0x1000>;
+ fsl,erratum-a009885;
};
};
From: Philipp Zabel <[email protected]>
[ Upstream commit 1a59cd88f55068710f6549bee548846661673780 ]
Stop the CODA960 JPEG encoder from overflowing capture buffers.
The bitstream buffer overflow interrupt doesn't seem to be connected,
so this has to be handled via timeout instead.
Reported-by: Martin Weber <[email protected]>
Fixes: 96f6f62c4656 ("media: coda: jpeg: add CODA960 JPEG encoder support")
Tested-by: Martin Weber <[email protected]>
Signed-off-by: Philipp Zabel <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/platform/coda/coda-common.c | 8 +++++---
drivers/media/platform/coda/coda-jpeg.c | 21 ++++++++++++++++++++-
2 files changed, 25 insertions(+), 4 deletions(-)
diff --git a/drivers/media/platform/coda/coda-common.c b/drivers/media/platform/coda/coda-common.c
index 87a2c706f7477..1eed69d29149f 100644
--- a/drivers/media/platform/coda/coda-common.c
+++ b/drivers/media/platform/coda/coda-common.c
@@ -1537,11 +1537,13 @@ static void coda_pic_run_work(struct work_struct *work)
if (!wait_for_completion_timeout(&ctx->completion,
msecs_to_jiffies(1000))) {
- dev_err(dev->dev, "CODA PIC_RUN timeout\n");
+ if (ctx->use_bit) {
+ dev_err(dev->dev, "CODA PIC_RUN timeout\n");
- ctx->hold = true;
+ ctx->hold = true;
- coda_hw_reset(ctx);
+ coda_hw_reset(ctx);
+ }
if (ctx->ops->run_timeout)
ctx->ops->run_timeout(ctx);
diff --git a/drivers/media/platform/coda/coda-jpeg.c b/drivers/media/platform/coda/coda-jpeg.c
index b11cfbe166dd3..a72f4655e5ad5 100644
--- a/drivers/media/platform/coda/coda-jpeg.c
+++ b/drivers/media/platform/coda/coda-jpeg.c
@@ -1127,7 +1127,8 @@ static int coda9_jpeg_prepare_encode(struct coda_ctx *ctx)
coda_write(dev, 0, CODA9_REG_JPEG_GBU_BT_PTR);
coda_write(dev, 0, CODA9_REG_JPEG_GBU_WD_PTR);
coda_write(dev, 0, CODA9_REG_JPEG_GBU_BBSR);
- coda_write(dev, 0, CODA9_REG_JPEG_BBC_STRM_CTRL);
+ coda_write(dev, BIT(31) | ((end_addr - start_addr - header_len) / 256),
+ CODA9_REG_JPEG_BBC_STRM_CTRL);
coda_write(dev, 0, CODA9_REG_JPEG_GBU_CTRL);
coda_write(dev, 0, CODA9_REG_JPEG_GBU_FF_RPTR);
coda_write(dev, 127, CODA9_REG_JPEG_GBU_BBER);
@@ -1257,6 +1258,23 @@ static void coda9_jpeg_finish_encode(struct coda_ctx *ctx)
coda_hw_reset(ctx);
}
+static void coda9_jpeg_encode_timeout(struct coda_ctx *ctx)
+{
+ struct coda_dev *dev = ctx->dev;
+ u32 end_addr, wr_ptr;
+
+ /* Handle missing BBC overflow interrupt via timeout */
+ end_addr = coda_read(dev, CODA9_REG_JPEG_BBC_END_ADDR);
+ wr_ptr = coda_read(dev, CODA9_REG_JPEG_BBC_WR_PTR);
+ if (wr_ptr >= end_addr - 256) {
+ v4l2_err(&dev->v4l2_dev, "JPEG too large for capture buffer\n");
+ coda9_jpeg_finish_encode(ctx);
+ return;
+ }
+
+ coda_hw_reset(ctx);
+}
+
static void coda9_jpeg_release(struct coda_ctx *ctx)
{
int i;
@@ -1276,6 +1294,7 @@ const struct coda_context_ops coda9_jpeg_encode_ops = {
.start_streaming = coda9_jpeg_start_encoding,
.prepare_run = coda9_jpeg_prepare_encode,
.finish_run = coda9_jpeg_finish_encode,
+ .run_timeout = coda9_jpeg_encode_timeout,
.release = coda9_jpeg_release,
};
--
2.34.1
From: Nicolas Toromanoff <[email protected]>
[ Upstream commit 4b898d5cfa4d9a0ad5bc82cb5eafdc092394c6a9 ]
Extra crypto manager auto test were crashing or failling due
to 2 reasons:
- block in a dead loop (dues to issues in cipher end process management)
- crash due to read/write unmapped memory (this crash was also reported
when using openssl afalg engine)
Rework interrupt management, interrupts are masked as soon as they are
no more used: if input buffer is fully consumed, "Input FIFO not full"
interrupt is masked and if output buffer is full, "Output FIFO not
empty" interrupt is masked.
And crypto request finish when input *and* outpout buffer are fully
read/write.
About the crash due to unmapped memory, using scatterwalk_copychunks()
that will map and copy each block fix the issue.
Using this api and copying full block will also fix unaligned data
access, avoid early copy of in/out buffer, and make useless the extra
alignment constraint.
Fixes: 9e054ec21ef8 ("crypto: stm32 - Support for STM32 CRYP crypto module")
Reported-by: Marek Vasut <[email protected]>
Signed-off-by: Nicolas Toromanoff <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/crypto/stm32/stm32-cryp.c | 790 +++++++++---------------------
1 file changed, 243 insertions(+), 547 deletions(-)
diff --git a/drivers/crypto/stm32/stm32-cryp.c b/drivers/crypto/stm32/stm32-cryp.c
index 9943836a5c25c..cd57c5bae3ce9 100644
--- a/drivers/crypto/stm32/stm32-cryp.c
+++ b/drivers/crypto/stm32/stm32-cryp.c
@@ -37,7 +37,6 @@
/* Mode mask = bits [15..0] */
#define FLG_MODE_MASK GENMASK(15, 0)
/* Bit [31..16] status */
-#define FLG_CCM_PADDED_WA BIT(16)
/* Registers */
#define CRYP_CR 0x00000000
@@ -105,8 +104,6 @@
/* Misc */
#define AES_BLOCK_32 (AES_BLOCK_SIZE / sizeof(u32))
#define GCM_CTR_INIT 2
-#define _walked_in (cryp->in_walk.offset - cryp->in_sg->offset)
-#define _walked_out (cryp->out_walk.offset - cryp->out_sg->offset)
#define CRYP_AUTOSUSPEND_DELAY 50
struct stm32_cryp_caps {
@@ -144,21 +141,11 @@ struct stm32_cryp {
size_t authsize;
size_t hw_blocksize;
- size_t total_in;
- size_t total_in_save;
- size_t total_out;
- size_t total_out_save;
+ size_t payload_in;
+ size_t header_in;
+ size_t payload_out;
- struct scatterlist *in_sg;
struct scatterlist *out_sg;
- struct scatterlist *out_sg_save;
-
- struct scatterlist in_sgl;
- struct scatterlist out_sgl;
- bool sgs_copied;
-
- int in_sg_len;
- int out_sg_len;
struct scatter_walk in_walk;
struct scatter_walk out_walk;
@@ -262,6 +249,7 @@ static inline int stm32_cryp_wait_output(struct stm32_cryp *cryp)
}
static int stm32_cryp_read_auth_tag(struct stm32_cryp *cryp);
+static void stm32_cryp_finish_req(struct stm32_cryp *cryp, int err);
static struct stm32_cryp *stm32_cryp_find_dev(struct stm32_cryp_ctx *ctx)
{
@@ -283,103 +271,6 @@ static struct stm32_cryp *stm32_cryp_find_dev(struct stm32_cryp_ctx *ctx)
return cryp;
}
-static int stm32_cryp_check_aligned(struct scatterlist *sg, size_t total,
- size_t align)
-{
- int len = 0;
-
- if (!total)
- return 0;
-
- if (!IS_ALIGNED(total, align))
- return -EINVAL;
-
- while (sg) {
- if (!IS_ALIGNED(sg->offset, sizeof(u32)))
- return -EINVAL;
-
- if (!IS_ALIGNED(sg->length, align))
- return -EINVAL;
-
- len += sg->length;
- sg = sg_next(sg);
- }
-
- if (len != total)
- return -EINVAL;
-
- return 0;
-}
-
-static int stm32_cryp_check_io_aligned(struct stm32_cryp *cryp)
-{
- int ret;
-
- ret = stm32_cryp_check_aligned(cryp->in_sg, cryp->total_in,
- cryp->hw_blocksize);
- if (ret)
- return ret;
-
- ret = stm32_cryp_check_aligned(cryp->out_sg, cryp->total_out,
- cryp->hw_blocksize);
-
- return ret;
-}
-
-static void sg_copy_buf(void *buf, struct scatterlist *sg,
- unsigned int start, unsigned int nbytes, int out)
-{
- struct scatter_walk walk;
-
- if (!nbytes)
- return;
-
- scatterwalk_start(&walk, sg);
- scatterwalk_advance(&walk, start);
- scatterwalk_copychunks(buf, &walk, nbytes, out);
- scatterwalk_done(&walk, out, 0);
-}
-
-static int stm32_cryp_copy_sgs(struct stm32_cryp *cryp)
-{
- void *buf_in, *buf_out;
- int pages, total_in, total_out;
-
- if (!stm32_cryp_check_io_aligned(cryp)) {
- cryp->sgs_copied = 0;
- return 0;
- }
-
- total_in = ALIGN(cryp->total_in, cryp->hw_blocksize);
- pages = total_in ? get_order(total_in) : 1;
- buf_in = (void *)__get_free_pages(GFP_ATOMIC, pages);
-
- total_out = ALIGN(cryp->total_out, cryp->hw_blocksize);
- pages = total_out ? get_order(total_out) : 1;
- buf_out = (void *)__get_free_pages(GFP_ATOMIC, pages);
-
- if (!buf_in || !buf_out) {
- dev_err(cryp->dev, "Can't allocate pages when unaligned\n");
- cryp->sgs_copied = 0;
- return -EFAULT;
- }
-
- sg_copy_buf(buf_in, cryp->in_sg, 0, cryp->total_in, 0);
-
- sg_init_one(&cryp->in_sgl, buf_in, total_in);
- cryp->in_sg = &cryp->in_sgl;
- cryp->in_sg_len = 1;
-
- sg_init_one(&cryp->out_sgl, buf_out, total_out);
- cryp->out_sg_save = cryp->out_sg;
- cryp->out_sg = &cryp->out_sgl;
- cryp->out_sg_len = 1;
-
- cryp->sgs_copied = 1;
-
- return 0;
-}
-
static void stm32_cryp_hw_write_iv(struct stm32_cryp *cryp, __be32 *iv)
{
if (!iv)
@@ -481,16 +372,99 @@ static int stm32_cryp_gcm_init(struct stm32_cryp *cryp, u32 cfg)
/* Wait for end of processing */
ret = stm32_cryp_wait_enable(cryp);
- if (ret)
+ if (ret) {
dev_err(cryp->dev, "Timeout (gcm init)\n");
+ return ret;
+ }
- return ret;
+ /* Prepare next phase */
+ if (cryp->areq->assoclen) {
+ cfg |= CR_PH_HEADER;
+ stm32_cryp_write(cryp, CRYP_CR, cfg);
+ } else if (stm32_cryp_get_input_text_len(cryp)) {
+ cfg |= CR_PH_PAYLOAD;
+ stm32_cryp_write(cryp, CRYP_CR, cfg);
+ }
+
+ return 0;
+}
+
+static void stm32_crypt_gcmccm_end_header(struct stm32_cryp *cryp)
+{
+ u32 cfg;
+ int err;
+
+ /* Check if whole header written */
+ if (!cryp->header_in) {
+ /* Wait for completion */
+ err = stm32_cryp_wait_busy(cryp);
+ if (err) {
+ dev_err(cryp->dev, "Timeout (gcm/ccm header)\n");
+ stm32_cryp_write(cryp, CRYP_IMSCR, 0);
+ stm32_cryp_finish_req(cryp, err);
+ return;
+ }
+
+ if (stm32_cryp_get_input_text_len(cryp)) {
+ /* Phase 3 : payload */
+ cfg = stm32_cryp_read(cryp, CRYP_CR);
+ cfg &= ~CR_CRYPEN;
+ stm32_cryp_write(cryp, CRYP_CR, cfg);
+
+ cfg &= ~CR_PH_MASK;
+ cfg |= CR_PH_PAYLOAD | CR_CRYPEN;
+ stm32_cryp_write(cryp, CRYP_CR, cfg);
+ } else {
+ /*
+ * Phase 4 : tag.
+ * Nothing to read, nothing to write, caller have to
+ * end request
+ */
+ }
+ }
+}
+
+static void stm32_cryp_write_ccm_first_header(struct stm32_cryp *cryp)
+{
+ unsigned int i;
+ size_t written;
+ size_t len;
+ u32 alen = cryp->areq->assoclen;
+ u32 block[AES_BLOCK_32] = {0};
+ u8 *b8 = (u8 *)block;
+
+ if (alen <= 65280) {
+ /* Write first u32 of B1 */
+ b8[0] = (alen >> 8) & 0xFF;
+ b8[1] = alen & 0xFF;
+ len = 2;
+ } else {
+ /* Build the two first u32 of B1 */
+ b8[0] = 0xFF;
+ b8[1] = 0xFE;
+ b8[2] = (alen & 0xFF000000) >> 24;
+ b8[3] = (alen & 0x00FF0000) >> 16;
+ b8[4] = (alen & 0x0000FF00) >> 8;
+ b8[5] = alen & 0x000000FF;
+ len = 6;
+ }
+
+ written = min_t(size_t, AES_BLOCK_SIZE - len, alen);
+
+ scatterwalk_copychunks((char *)block + len, &cryp->in_walk, written, 0);
+ for (i = 0; i < AES_BLOCK_32; i++)
+ stm32_cryp_write(cryp, CRYP_DIN, block[i]);
+
+ cryp->header_in -= written;
+
+ stm32_crypt_gcmccm_end_header(cryp);
}
static int stm32_cryp_ccm_init(struct stm32_cryp *cryp, u32 cfg)
{
int ret;
- u8 iv[AES_BLOCK_SIZE], b0[AES_BLOCK_SIZE];
+ u32 iv_32[AES_BLOCK_32], b0_32[AES_BLOCK_32];
+ u8 *iv = (u8 *)iv_32, *b0 = (u8 *)b0_32;
__be32 *bd;
u32 *d;
unsigned int i, textlen;
@@ -531,17 +505,30 @@ static int stm32_cryp_ccm_init(struct stm32_cryp *cryp, u32 cfg)
/* Wait for end of processing */
ret = stm32_cryp_wait_enable(cryp);
- if (ret)
+ if (ret) {
dev_err(cryp->dev, "Timeout (ccm init)\n");
+ return ret;
+ }
- return ret;
+ /* Prepare next phase */
+ if (cryp->areq->assoclen) {
+ cfg |= CR_PH_HEADER | CR_CRYPEN;
+ stm32_cryp_write(cryp, CRYP_CR, cfg);
+
+ /* Write first (special) block (may move to next phase [payload]) */
+ stm32_cryp_write_ccm_first_header(cryp);
+ } else if (stm32_cryp_get_input_text_len(cryp)) {
+ cfg |= CR_PH_PAYLOAD;
+ stm32_cryp_write(cryp, CRYP_CR, cfg);
+ }
+
+ return 0;
}
static int stm32_cryp_hw_init(struct stm32_cryp *cryp)
{
int ret;
u32 cfg, hw_mode;
-
pm_runtime_resume_and_get(cryp->dev);
/* Disable interrupt */
@@ -605,16 +592,6 @@ static int stm32_cryp_hw_init(struct stm32_cryp *cryp)
if (ret)
return ret;
- /* Phase 2 : header (authenticated data) */
- if (cryp->areq->assoclen) {
- cfg |= CR_PH_HEADER;
- } else if (stm32_cryp_get_input_text_len(cryp)) {
- cfg |= CR_PH_PAYLOAD;
- stm32_cryp_write(cryp, CRYP_CR, cfg);
- } else {
- cfg |= CR_PH_INIT;
- }
-
break;
case CR_DES_CBC:
@@ -633,8 +610,6 @@ static int stm32_cryp_hw_init(struct stm32_cryp *cryp)
stm32_cryp_write(cryp, CRYP_CR, cfg);
- cryp->flags &= ~FLG_CCM_PADDED_WA;
-
return 0;
}
@@ -647,25 +622,6 @@ static void stm32_cryp_finish_req(struct stm32_cryp *cryp, int err)
if (!err && (!(is_gcm(cryp) || is_ccm(cryp) || is_ecb(cryp))))
stm32_cryp_get_iv(cryp);
- if (cryp->sgs_copied) {
- void *buf_in, *buf_out;
- int pages, len;
-
- buf_in = sg_virt(&cryp->in_sgl);
- buf_out = sg_virt(&cryp->out_sgl);
-
- sg_copy_buf(buf_out, cryp->out_sg_save, 0,
- cryp->total_out_save, 1);
-
- len = ALIGN(cryp->total_in_save, cryp->hw_blocksize);
- pages = len ? get_order(len) : 1;
- free_pages((unsigned long)buf_in, pages);
-
- len = ALIGN(cryp->total_out_save, cryp->hw_blocksize);
- pages = len ? get_order(len) : 1;
- free_pages((unsigned long)buf_out, pages);
- }
-
pm_runtime_mark_last_busy(cryp->dev);
pm_runtime_put_autosuspend(cryp->dev);
@@ -1029,6 +985,7 @@ static int stm32_cryp_prepare_req(struct skcipher_request *req,
struct stm32_cryp_ctx *ctx;
struct stm32_cryp *cryp;
struct stm32_cryp_reqctx *rctx;
+ struct scatterlist *in_sg;
int ret;
if (!req && !areq)
@@ -1054,76 +1011,55 @@ static int stm32_cryp_prepare_req(struct skcipher_request *req,
if (req) {
cryp->req = req;
cryp->areq = NULL;
- cryp->total_in = req->cryptlen;
- cryp->total_out = cryp->total_in;
+ cryp->header_in = 0;
+ cryp->payload_in = req->cryptlen;
+ cryp->payload_out = req->cryptlen;
+ cryp->authsize = 0;
} else {
/*
* Length of input and output data:
* Encryption case:
- * INPUT = AssocData || PlainText
+ * INPUT = AssocData || PlainText
* <- assoclen -> <- cryptlen ->
- * <------- total_in ----------->
*
- * OUTPUT = AssocData || CipherText || AuthTag
- * <- assoclen -> <- cryptlen -> <- authsize ->
- * <---------------- total_out ----------------->
+ * OUTPUT = AssocData || CipherText || AuthTag
+ * <- assoclen -> <-- cryptlen --> <- authsize ->
*
* Decryption case:
- * INPUT = AssocData || CipherText || AuthTag
- * <- assoclen -> <--------- cryptlen --------->
- * <- authsize ->
- * <---------------- total_in ------------------>
+ * INPUT = AssocData || CipherTex || AuthTag
+ * <- assoclen ---> <---------- cryptlen ---------->
*
- * OUTPUT = AssocData || PlainText
- * <- assoclen -> <- crypten - authsize ->
- * <---------- total_out ----------------->
+ * OUTPUT = AssocData || PlainText
+ * <- assoclen -> <- cryptlen - authsize ->
*/
cryp->areq = areq;
cryp->req = NULL;
cryp->authsize = crypto_aead_authsize(crypto_aead_reqtfm(areq));
- cryp->total_in = areq->assoclen + areq->cryptlen;
- if (is_encrypt(cryp))
- /* Append auth tag to output */
- cryp->total_out = cryp->total_in + cryp->authsize;
- else
- /* No auth tag in output */
- cryp->total_out = cryp->total_in - cryp->authsize;
+ if (is_encrypt(cryp)) {
+ cryp->payload_in = areq->cryptlen;
+ cryp->header_in = areq->assoclen;
+ cryp->payload_out = areq->cryptlen;
+ } else {
+ cryp->payload_in = areq->cryptlen - cryp->authsize;
+ cryp->header_in = areq->assoclen;
+ cryp->payload_out = cryp->payload_in;
+ }
}
- cryp->total_in_save = cryp->total_in;
- cryp->total_out_save = cryp->total_out;
+ in_sg = req ? req->src : areq->src;
+ scatterwalk_start(&cryp->in_walk, in_sg);
- cryp->in_sg = req ? req->src : areq->src;
cryp->out_sg = req ? req->dst : areq->dst;
- cryp->out_sg_save = cryp->out_sg;
-
- cryp->in_sg_len = sg_nents_for_len(cryp->in_sg, cryp->total_in);
- if (cryp->in_sg_len < 0) {
- dev_err(cryp->dev, "Cannot get in_sg_len\n");
- ret = cryp->in_sg_len;
- return ret;
- }
-
- cryp->out_sg_len = sg_nents_for_len(cryp->out_sg, cryp->total_out);
- if (cryp->out_sg_len < 0) {
- dev_err(cryp->dev, "Cannot get out_sg_len\n");
- ret = cryp->out_sg_len;
- return ret;
- }
-
- ret = stm32_cryp_copy_sgs(cryp);
- if (ret)
- return ret;
-
- scatterwalk_start(&cryp->in_walk, cryp->in_sg);
scatterwalk_start(&cryp->out_walk, cryp->out_sg);
if (is_gcm(cryp) || is_ccm(cryp)) {
/* In output, jump after assoc data */
- scatterwalk_advance(&cryp->out_walk, cryp->areq->assoclen);
- cryp->total_out -= cryp->areq->assoclen;
+ scatterwalk_copychunks(NULL, &cryp->out_walk, cryp->areq->assoclen, 2);
}
+ if (is_ctr(cryp))
+ memset(cryp->last_ctr, 0, sizeof(cryp->last_ctr));
+
ret = stm32_cryp_hw_init(cryp);
return ret;
}
@@ -1171,8 +1107,7 @@ static int stm32_cryp_aead_one_req(struct crypto_engine *engine, void *areq)
if (!cryp)
return -ENODEV;
- if (unlikely(!cryp->areq->assoclen &&
- !stm32_cryp_get_input_text_len(cryp))) {
+ if (unlikely(!cryp->payload_in && !cryp->header_in)) {
/* No input data to process: get tag and finish */
stm32_cryp_finish_req(cryp, 0);
return 0;
@@ -1181,43 +1116,10 @@ static int stm32_cryp_aead_one_req(struct crypto_engine *engine, void *areq)
return stm32_cryp_cpu_start(cryp);
}
-static u32 *stm32_cryp_next_out(struct stm32_cryp *cryp, u32 *dst,
- unsigned int n)
-{
- scatterwalk_advance(&cryp->out_walk, n);
-
- if (unlikely(cryp->out_sg->length == _walked_out)) {
- cryp->out_sg = sg_next(cryp->out_sg);
- if (cryp->out_sg) {
- scatterwalk_start(&cryp->out_walk, cryp->out_sg);
- return (sg_virt(cryp->out_sg) + _walked_out);
- }
- }
-
- return (u32 *)((u8 *)dst + n);
-}
-
-static u32 *stm32_cryp_next_in(struct stm32_cryp *cryp, u32 *src,
- unsigned int n)
-{
- scatterwalk_advance(&cryp->in_walk, n);
-
- if (unlikely(cryp->in_sg->length == _walked_in)) {
- cryp->in_sg = sg_next(cryp->in_sg);
- if (cryp->in_sg) {
- scatterwalk_start(&cryp->in_walk, cryp->in_sg);
- return (sg_virt(cryp->in_sg) + _walked_in);
- }
- }
-
- return (u32 *)((u8 *)src + n);
-}
-
static int stm32_cryp_read_auth_tag(struct stm32_cryp *cryp)
{
- u32 cfg, size_bit, *dst, d32;
- u8 *d8;
- unsigned int i, j;
+ u32 cfg, size_bit;
+ unsigned int i;
int ret = 0;
/* Update Config */
@@ -1240,7 +1142,7 @@ static int stm32_cryp_read_auth_tag(struct stm32_cryp *cryp)
stm32_cryp_write(cryp, CRYP_DIN, size_bit);
size_bit = is_encrypt(cryp) ? cryp->areq->cryptlen :
- cryp->areq->cryptlen - AES_BLOCK_SIZE;
+ cryp->areq->cryptlen - cryp->authsize;
size_bit *= 8;
if (cryp->caps->swap_final)
size_bit = (__force u32)cpu_to_be32(size_bit);
@@ -1249,11 +1151,9 @@ static int stm32_cryp_read_auth_tag(struct stm32_cryp *cryp)
stm32_cryp_write(cryp, CRYP_DIN, size_bit);
} else {
/* CCM: write CTR0 */
- u8 iv[AES_BLOCK_SIZE];
- u32 *iv32 = (u32 *)iv;
- __be32 *biv;
-
- biv = (void *)iv;
+ u32 iv32[AES_BLOCK_32];
+ u8 *iv = (u8 *)iv32;
+ __be32 *biv = (__be32 *)iv32;
memcpy(iv, cryp->areq->iv, AES_BLOCK_SIZE);
memset(iv + AES_BLOCK_SIZE - 1 - iv[0], 0, iv[0] + 1);
@@ -1275,39 +1175,18 @@ static int stm32_cryp_read_auth_tag(struct stm32_cryp *cryp)
}
if (is_encrypt(cryp)) {
+ u32 out_tag[AES_BLOCK_32];
+
/* Get and write tag */
- dst = sg_virt(cryp->out_sg) + _walked_out;
+ for (i = 0; i < AES_BLOCK_32; i++)
+ out_tag[i] = stm32_cryp_read(cryp, CRYP_DOUT);
- for (i = 0; i < AES_BLOCK_32; i++) {
- if (cryp->total_out >= sizeof(u32)) {
- /* Read a full u32 */
- *dst = stm32_cryp_read(cryp, CRYP_DOUT);
-
- dst = stm32_cryp_next_out(cryp, dst,
- sizeof(u32));
- cryp->total_out -= sizeof(u32);
- } else if (!cryp->total_out) {
- /* Empty fifo out (data from input padding) */
- stm32_cryp_read(cryp, CRYP_DOUT);
- } else {
- /* Read less than an u32 */
- d32 = stm32_cryp_read(cryp, CRYP_DOUT);
- d8 = (u8 *)&d32;
-
- for (j = 0; j < cryp->total_out; j++) {
- *((u8 *)dst) = *(d8++);
- dst = stm32_cryp_next_out(cryp, dst, 1);
- }
- cryp->total_out = 0;
- }
- }
+ scatterwalk_copychunks(out_tag, &cryp->out_walk, cryp->authsize, 1);
} else {
/* Get and check tag */
u32 in_tag[AES_BLOCK_32], out_tag[AES_BLOCK_32];
- scatterwalk_map_and_copy(in_tag, cryp->in_sg,
- cryp->total_in_save - cryp->authsize,
- cryp->authsize, 0);
+ scatterwalk_copychunks(in_tag, &cryp->in_walk, cryp->authsize, 0);
for (i = 0; i < AES_BLOCK_32; i++)
out_tag[i] = stm32_cryp_read(cryp, CRYP_DOUT);
@@ -1349,92 +1228,37 @@ static void stm32_cryp_check_ctr_counter(struct stm32_cryp *cryp)
cryp->last_ctr[3] = cpu_to_be32(stm32_cryp_read(cryp, CRYP_IV1RR));
}
-static bool stm32_cryp_irq_read_data(struct stm32_cryp *cryp)
+static void stm32_cryp_irq_read_data(struct stm32_cryp *cryp)
{
- unsigned int i, j;
- u32 d32, *dst;
- u8 *d8;
- size_t tag_size;
-
- /* Do no read tag now (if any) */
- if (is_encrypt(cryp) && (is_gcm(cryp) || is_ccm(cryp)))
- tag_size = cryp->authsize;
- else
- tag_size = 0;
-
- dst = sg_virt(cryp->out_sg) + _walked_out;
-
- for (i = 0; i < cryp->hw_blocksize / sizeof(u32); i++) {
- if (likely(cryp->total_out - tag_size >= sizeof(u32))) {
- /* Read a full u32 */
- *dst = stm32_cryp_read(cryp, CRYP_DOUT);
+ unsigned int i;
+ u32 block[AES_BLOCK_32];
- dst = stm32_cryp_next_out(cryp, dst, sizeof(u32));
- cryp->total_out -= sizeof(u32);
- } else if (cryp->total_out == tag_size) {
- /* Empty fifo out (data from input padding) */
- d32 = stm32_cryp_read(cryp, CRYP_DOUT);
- } else {
- /* Read less than an u32 */
- d32 = stm32_cryp_read(cryp, CRYP_DOUT);
- d8 = (u8 *)&d32;
-
- for (j = 0; j < cryp->total_out - tag_size; j++) {
- *((u8 *)dst) = *(d8++);
- dst = stm32_cryp_next_out(cryp, dst, 1);
- }
- cryp->total_out = tag_size;
- }
- }
+ for (i = 0; i < cryp->hw_blocksize / sizeof(u32); i++)
+ block[i] = stm32_cryp_read(cryp, CRYP_DOUT);
- return !(cryp->total_out - tag_size) || !cryp->total_in;
+ scatterwalk_copychunks(block, &cryp->out_walk, min_t(size_t, cryp->hw_blocksize,
+ cryp->payload_out), 1);
+ cryp->payload_out -= min_t(size_t, cryp->hw_blocksize,
+ cryp->payload_out);
}
static void stm32_cryp_irq_write_block(struct stm32_cryp *cryp)
{
- unsigned int i, j;
- u32 *src;
- u8 d8[4];
- size_t tag_size;
-
- /* Do no write tag (if any) */
- if (is_decrypt(cryp) && (is_gcm(cryp) || is_ccm(cryp)))
- tag_size = cryp->authsize;
- else
- tag_size = 0;
-
- src = sg_virt(cryp->in_sg) + _walked_in;
+ unsigned int i;
+ u32 block[AES_BLOCK_32] = {0};
- for (i = 0; i < cryp->hw_blocksize / sizeof(u32); i++) {
- if (likely(cryp->total_in - tag_size >= sizeof(u32))) {
- /* Write a full u32 */
- stm32_cryp_write(cryp, CRYP_DIN, *src);
+ scatterwalk_copychunks(block, &cryp->in_walk, min_t(size_t, cryp->hw_blocksize,
+ cryp->payload_in), 0);
+ for (i = 0; i < cryp->hw_blocksize / sizeof(u32); i++)
+ stm32_cryp_write(cryp, CRYP_DIN, block[i]);
- src = stm32_cryp_next_in(cryp, src, sizeof(u32));
- cryp->total_in -= sizeof(u32);
- } else if (cryp->total_in == tag_size) {
- /* Write padding data */
- stm32_cryp_write(cryp, CRYP_DIN, 0);
- } else {
- /* Write less than an u32 */
- memset(d8, 0, sizeof(u32));
- for (j = 0; j < cryp->total_in - tag_size; j++) {
- d8[j] = *((u8 *)src);
- src = stm32_cryp_next_in(cryp, src, 1);
- }
-
- stm32_cryp_write(cryp, CRYP_DIN, *(u32 *)d8);
- cryp->total_in = tag_size;
- }
- }
+ cryp->payload_in -= min_t(size_t, cryp->hw_blocksize, cryp->payload_in);
}
static void stm32_cryp_irq_write_gcm_padded_data(struct stm32_cryp *cryp)
{
int err;
- u32 cfg, tmp[AES_BLOCK_32];
- size_t total_in_ori = cryp->total_in;
- struct scatterlist *out_sg_ori = cryp->out_sg;
+ u32 cfg, block[AES_BLOCK_32] = {0};
unsigned int i;
/* 'Special workaround' procedure described in the datasheet */
@@ -1459,18 +1283,25 @@ static void stm32_cryp_irq_write_gcm_padded_data(struct stm32_cryp *cryp)
/* b) pad and write the last block */
stm32_cryp_irq_write_block(cryp);
- cryp->total_in = total_in_ori;
+ /* wait end of process */
err = stm32_cryp_wait_output(cryp);
if (err) {
- dev_err(cryp->dev, "Timeout (write gcm header)\n");
+ dev_err(cryp->dev, "Timeout (write gcm last data)\n");
return stm32_cryp_finish_req(cryp, err);
}
/* c) get and store encrypted data */
- stm32_cryp_irq_read_data(cryp);
- scatterwalk_map_and_copy(tmp, out_sg_ori,
- cryp->total_in_save - total_in_ori,
- total_in_ori, 0);
+ /*
+ * Same code as stm32_cryp_irq_read_data(), but we want to store
+ * block value
+ */
+ for (i = 0; i < cryp->hw_blocksize / sizeof(u32); i++)
+ block[i] = stm32_cryp_read(cryp, CRYP_DOUT);
+
+ scatterwalk_copychunks(block, &cryp->out_walk, min_t(size_t, cryp->hw_blocksize,
+ cryp->payload_out), 1);
+ cryp->payload_out -= min_t(size_t, cryp->hw_blocksize,
+ cryp->payload_out);
/* d) change mode back to AES GCM */
cfg &= ~CR_ALGO_MASK;
@@ -1483,19 +1314,13 @@ static void stm32_cryp_irq_write_gcm_padded_data(struct stm32_cryp *cryp)
stm32_cryp_write(cryp, CRYP_CR, cfg);
/* f) write padded data */
- for (i = 0; i < AES_BLOCK_32; i++) {
- if (cryp->total_in)
- stm32_cryp_write(cryp, CRYP_DIN, tmp[i]);
- else
- stm32_cryp_write(cryp, CRYP_DIN, 0);
-
- cryp->total_in -= min_t(size_t, sizeof(u32), cryp->total_in);
- }
+ for (i = 0; i < AES_BLOCK_32; i++)
+ stm32_cryp_write(cryp, CRYP_DIN, block[i]);
/* g) Empty fifo out */
err = stm32_cryp_wait_output(cryp);
if (err) {
- dev_err(cryp->dev, "Timeout (write gcm header)\n");
+ dev_err(cryp->dev, "Timeout (write gcm padded data)\n");
return stm32_cryp_finish_req(cryp, err);
}
@@ -1508,16 +1333,14 @@ static void stm32_cryp_irq_write_gcm_padded_data(struct stm32_cryp *cryp)
static void stm32_cryp_irq_set_npblb(struct stm32_cryp *cryp)
{
- u32 cfg, payload_bytes;
+ u32 cfg;
/* disable ip, set NPBLB and reneable ip */
cfg = stm32_cryp_read(cryp, CRYP_CR);
cfg &= ~CR_CRYPEN;
stm32_cryp_write(cryp, CRYP_CR, cfg);
- payload_bytes = is_decrypt(cryp) ? cryp->total_in - cryp->authsize :
- cryp->total_in;
- cfg |= (cryp->hw_blocksize - payload_bytes) << CR_NBPBL_SHIFT;
+ cfg |= (cryp->hw_blocksize - cryp->payload_in) << CR_NBPBL_SHIFT;
cfg |= CR_CRYPEN;
stm32_cryp_write(cryp, CRYP_CR, cfg);
}
@@ -1526,13 +1349,11 @@ static void stm32_cryp_irq_write_ccm_padded_data(struct stm32_cryp *cryp)
{
int err = 0;
u32 cfg, iv1tmp;
- u32 cstmp1[AES_BLOCK_32], cstmp2[AES_BLOCK_32], tmp[AES_BLOCK_32];
- size_t last_total_out, total_in_ori = cryp->total_in;
- struct scatterlist *out_sg_ori = cryp->out_sg;
+ u32 cstmp1[AES_BLOCK_32], cstmp2[AES_BLOCK_32];
+ u32 block[AES_BLOCK_32] = {0};
unsigned int i;
/* 'Special workaround' procedure described in the datasheet */
- cryp->flags |= FLG_CCM_PADDED_WA;
/* a) disable ip */
stm32_cryp_write(cryp, CRYP_IMSCR, 0);
@@ -1562,7 +1383,7 @@ static void stm32_cryp_irq_write_ccm_padded_data(struct stm32_cryp *cryp)
/* b) pad and write the last block */
stm32_cryp_irq_write_block(cryp);
- cryp->total_in = total_in_ori;
+ /* wait end of process */
err = stm32_cryp_wait_output(cryp);
if (err) {
dev_err(cryp->dev, "Timeout (wite ccm padded data)\n");
@@ -1570,13 +1391,16 @@ static void stm32_cryp_irq_write_ccm_padded_data(struct stm32_cryp *cryp)
}
/* c) get and store decrypted data */
- last_total_out = cryp->total_out;
- stm32_cryp_irq_read_data(cryp);
+ /*
+ * Same code as stm32_cryp_irq_read_data(), but we want to store
+ * block value
+ */
+ for (i = 0; i < cryp->hw_blocksize / sizeof(u32); i++)
+ block[i] = stm32_cryp_read(cryp, CRYP_DOUT);
- memset(tmp, 0, sizeof(tmp));
- scatterwalk_map_and_copy(tmp, out_sg_ori,
- cryp->total_out_save - last_total_out,
- last_total_out, 0);
+ scatterwalk_copychunks(block, &cryp->out_walk, min_t(size_t, cryp->hw_blocksize,
+ cryp->payload_out), 1);
+ cryp->payload_out -= min_t(size_t, cryp->hw_blocksize, cryp->payload_out);
/* d) Load again CRYP_CSGCMCCMxR */
for (i = 0; i < ARRAY_SIZE(cstmp2); i++)
@@ -1593,10 +1417,10 @@ static void stm32_cryp_irq_write_ccm_padded_data(struct stm32_cryp *cryp)
stm32_cryp_write(cryp, CRYP_CR, cfg);
/* g) XOR and write padded data */
- for (i = 0; i < ARRAY_SIZE(tmp); i++) {
- tmp[i] ^= cstmp1[i];
- tmp[i] ^= cstmp2[i];
- stm32_cryp_write(cryp, CRYP_DIN, tmp[i]);
+ for (i = 0; i < ARRAY_SIZE(block); i++) {
+ block[i] ^= cstmp1[i];
+ block[i] ^= cstmp2[i];
+ stm32_cryp_write(cryp, CRYP_DIN, block[i]);
}
/* h) wait for completion */
@@ -1610,30 +1434,34 @@ static void stm32_cryp_irq_write_ccm_padded_data(struct stm32_cryp *cryp)
static void stm32_cryp_irq_write_data(struct stm32_cryp *cryp)
{
- if (unlikely(!cryp->total_in)) {
+ if (unlikely(!cryp->payload_in)) {
dev_warn(cryp->dev, "No more data to process\n");
return;
}
- if (unlikely(cryp->total_in < AES_BLOCK_SIZE &&
+ if (unlikely(cryp->payload_in < AES_BLOCK_SIZE &&
(stm32_cryp_get_hw_mode(cryp) == CR_AES_GCM) &&
is_encrypt(cryp))) {
/* Padding for AES GCM encryption */
- if (cryp->caps->padding_wa)
+ if (cryp->caps->padding_wa) {
/* Special case 1 */
- return stm32_cryp_irq_write_gcm_padded_data(cryp);
+ stm32_cryp_irq_write_gcm_padded_data(cryp);
+ return;
+ }
/* Setting padding bytes (NBBLB) */
stm32_cryp_irq_set_npblb(cryp);
}
- if (unlikely((cryp->total_in - cryp->authsize < AES_BLOCK_SIZE) &&
+ if (unlikely((cryp->payload_in < AES_BLOCK_SIZE) &&
(stm32_cryp_get_hw_mode(cryp) == CR_AES_CCM) &&
is_decrypt(cryp))) {
/* Padding for AES CCM decryption */
- if (cryp->caps->padding_wa)
+ if (cryp->caps->padding_wa) {
/* Special case 2 */
- return stm32_cryp_irq_write_ccm_padded_data(cryp);
+ stm32_cryp_irq_write_ccm_padded_data(cryp);
+ return;
+ }
/* Setting padding bytes (NBBLB) */
stm32_cryp_irq_set_npblb(cryp);
@@ -1645,192 +1473,60 @@ static void stm32_cryp_irq_write_data(struct stm32_cryp *cryp)
stm32_cryp_irq_write_block(cryp);
}
-static void stm32_cryp_irq_write_gcm_header(struct stm32_cryp *cryp)
+static void stm32_cryp_irq_write_gcmccm_header(struct stm32_cryp *cryp)
{
- int err;
- unsigned int i, j;
- u32 cfg, *src;
-
- src = sg_virt(cryp->in_sg) + _walked_in;
-
- for (i = 0; i < AES_BLOCK_32; i++) {
- stm32_cryp_write(cryp, CRYP_DIN, *src);
-
- src = stm32_cryp_next_in(cryp, src, sizeof(u32));
- cryp->total_in -= min_t(size_t, sizeof(u32), cryp->total_in);
-
- /* Check if whole header written */
- if ((cryp->total_in_save - cryp->total_in) ==
- cryp->areq->assoclen) {
- /* Write padding if needed */
- for (j = i + 1; j < AES_BLOCK_32; j++)
- stm32_cryp_write(cryp, CRYP_DIN, 0);
-
- /* Wait for completion */
- err = stm32_cryp_wait_busy(cryp);
- if (err) {
- dev_err(cryp->dev, "Timeout (gcm header)\n");
- return stm32_cryp_finish_req(cryp, err);
- }
-
- if (stm32_cryp_get_input_text_len(cryp)) {
- /* Phase 3 : payload */
- cfg = stm32_cryp_read(cryp, CRYP_CR);
- cfg &= ~CR_CRYPEN;
- stm32_cryp_write(cryp, CRYP_CR, cfg);
-
- cfg &= ~CR_PH_MASK;
- cfg |= CR_PH_PAYLOAD;
- cfg |= CR_CRYPEN;
- stm32_cryp_write(cryp, CRYP_CR, cfg);
- } else {
- /* Phase 4 : tag */
- stm32_cryp_write(cryp, CRYP_IMSCR, 0);
- stm32_cryp_finish_req(cryp, 0);
- }
-
- break;
- }
-
- if (!cryp->total_in)
- break;
- }
-}
+ unsigned int i;
+ u32 block[AES_BLOCK_32] = {0};
+ size_t written;
-static void stm32_cryp_irq_write_ccm_header(struct stm32_cryp *cryp)
-{
- int err;
- unsigned int i = 0, j, k;
- u32 alen, cfg, *src;
- u8 d8[4];
-
- src = sg_virt(cryp->in_sg) + _walked_in;
- alen = cryp->areq->assoclen;
-
- if (!_walked_in) {
- if (cryp->areq->assoclen <= 65280) {
- /* Write first u32 of B1 */
- d8[0] = (alen >> 8) & 0xFF;
- d8[1] = alen & 0xFF;
- d8[2] = *((u8 *)src);
- src = stm32_cryp_next_in(cryp, src, 1);
- d8[3] = *((u8 *)src);
- src = stm32_cryp_next_in(cryp, src, 1);
-
- stm32_cryp_write(cryp, CRYP_DIN, *(u32 *)d8);
- i++;
-
- cryp->total_in -= min_t(size_t, 2, cryp->total_in);
- } else {
- /* Build the two first u32 of B1 */
- d8[0] = 0xFF;
- d8[1] = 0xFE;
- d8[2] = alen & 0xFF000000;
- d8[3] = alen & 0x00FF0000;
-
- stm32_cryp_write(cryp, CRYP_DIN, *(u32 *)d8);
- i++;
-
- d8[0] = alen & 0x0000FF00;
- d8[1] = alen & 0x000000FF;
- d8[2] = *((u8 *)src);
- src = stm32_cryp_next_in(cryp, src, 1);
- d8[3] = *((u8 *)src);
- src = stm32_cryp_next_in(cryp, src, 1);
-
- stm32_cryp_write(cryp, CRYP_DIN, *(u32 *)d8);
- i++;
-
- cryp->total_in -= min_t(size_t, 2, cryp->total_in);
- }
- }
+ written = min_t(size_t, AES_BLOCK_SIZE, cryp->header_in);
- /* Write next u32 */
- for (; i < AES_BLOCK_32; i++) {
- /* Build an u32 */
- memset(d8, 0, sizeof(u32));
- for (k = 0; k < sizeof(u32); k++) {
- d8[k] = *((u8 *)src);
- src = stm32_cryp_next_in(cryp, src, 1);
-
- cryp->total_in -= min_t(size_t, 1, cryp->total_in);
- if ((cryp->total_in_save - cryp->total_in) == alen)
- break;
- }
+ scatterwalk_copychunks(block, &cryp->in_walk, written, 0);
+ for (i = 0; i < AES_BLOCK_32; i++)
+ stm32_cryp_write(cryp, CRYP_DIN, block[i]);
- stm32_cryp_write(cryp, CRYP_DIN, *(u32 *)d8);
-
- if ((cryp->total_in_save - cryp->total_in) == alen) {
- /* Write padding if needed */
- for (j = i + 1; j < AES_BLOCK_32; j++)
- stm32_cryp_write(cryp, CRYP_DIN, 0);
-
- /* Wait for completion */
- err = stm32_cryp_wait_busy(cryp);
- if (err) {
- dev_err(cryp->dev, "Timeout (ccm header)\n");
- return stm32_cryp_finish_req(cryp, err);
- }
-
- if (stm32_cryp_get_input_text_len(cryp)) {
- /* Phase 3 : payload */
- cfg = stm32_cryp_read(cryp, CRYP_CR);
- cfg &= ~CR_CRYPEN;
- stm32_cryp_write(cryp, CRYP_CR, cfg);
-
- cfg &= ~CR_PH_MASK;
- cfg |= CR_PH_PAYLOAD;
- cfg |= CR_CRYPEN;
- stm32_cryp_write(cryp, CRYP_CR, cfg);
- } else {
- /* Phase 4 : tag */
- stm32_cryp_write(cryp, CRYP_IMSCR, 0);
- stm32_cryp_finish_req(cryp, 0);
- }
+ cryp->header_in -= written;
- break;
- }
- }
+ stm32_crypt_gcmccm_end_header(cryp);
}
static irqreturn_t stm32_cryp_irq_thread(int irq, void *arg)
{
struct stm32_cryp *cryp = arg;
u32 ph;
+ u32 it_mask = stm32_cryp_read(cryp, CRYP_IMSCR);
if (cryp->irq_status & MISR_OUT)
/* Output FIFO IRQ: read data */
- if (unlikely(stm32_cryp_irq_read_data(cryp))) {
- /* All bytes processed, finish */
- stm32_cryp_write(cryp, CRYP_IMSCR, 0);
- stm32_cryp_finish_req(cryp, 0);
- return IRQ_HANDLED;
- }
+ stm32_cryp_irq_read_data(cryp);
if (cryp->irq_status & MISR_IN) {
- if (is_gcm(cryp)) {
- ph = stm32_cryp_read(cryp, CRYP_CR) & CR_PH_MASK;
- if (unlikely(ph == CR_PH_HEADER))
- /* Write Header */
- stm32_cryp_irq_write_gcm_header(cryp);
- else
- /* Input FIFO IRQ: write data */
- stm32_cryp_irq_write_data(cryp);
- cryp->gcm_ctr++;
- } else if (is_ccm(cryp)) {
+ if (is_gcm(cryp) || is_ccm(cryp)) {
ph = stm32_cryp_read(cryp, CRYP_CR) & CR_PH_MASK;
if (unlikely(ph == CR_PH_HEADER))
/* Write Header */
- stm32_cryp_irq_write_ccm_header(cryp);
+ stm32_cryp_irq_write_gcmccm_header(cryp);
else
/* Input FIFO IRQ: write data */
stm32_cryp_irq_write_data(cryp);
+ if (is_gcm(cryp))
+ cryp->gcm_ctr++;
} else {
/* Input FIFO IRQ: write data */
stm32_cryp_irq_write_data(cryp);
}
}
+ /* Mask useless interrupts */
+ if (!cryp->payload_in && !cryp->header_in)
+ it_mask &= ~IMSCR_IN;
+ if (!cryp->payload_out)
+ it_mask &= ~IMSCR_OUT;
+ stm32_cryp_write(cryp, CRYP_IMSCR, it_mask);
+
+ if (!cryp->payload_in && !cryp->header_in && !cryp->payload_out)
+ stm32_cryp_finish_req(cryp, 0);
+
return IRQ_HANDLED;
}
@@ -1851,7 +1547,7 @@ static struct skcipher_alg crypto_algs[] = {
.base.cra_flags = CRYPTO_ALG_ASYNC,
.base.cra_blocksize = AES_BLOCK_SIZE,
.base.cra_ctxsize = sizeof(struct stm32_cryp_ctx),
- .base.cra_alignmask = 0xf,
+ .base.cra_alignmask = 0,
.base.cra_module = THIS_MODULE,
.init = stm32_cryp_init_tfm,
@@ -1868,7 +1564,7 @@ static struct skcipher_alg crypto_algs[] = {
.base.cra_flags = CRYPTO_ALG_ASYNC,
.base.cra_blocksize = AES_BLOCK_SIZE,
.base.cra_ctxsize = sizeof(struct stm32_cryp_ctx),
- .base.cra_alignmask = 0xf,
+ .base.cra_alignmask = 0,
.base.cra_module = THIS_MODULE,
.init = stm32_cryp_init_tfm,
@@ -1886,7 +1582,7 @@ static struct skcipher_alg crypto_algs[] = {
.base.cra_flags = CRYPTO_ALG_ASYNC,
.base.cra_blocksize = 1,
.base.cra_ctxsize = sizeof(struct stm32_cryp_ctx),
- .base.cra_alignmask = 0xf,
+ .base.cra_alignmask = 0,
.base.cra_module = THIS_MODULE,
.init = stm32_cryp_init_tfm,
@@ -1904,7 +1600,7 @@ static struct skcipher_alg crypto_algs[] = {
.base.cra_flags = CRYPTO_ALG_ASYNC,
.base.cra_blocksize = DES_BLOCK_SIZE,
.base.cra_ctxsize = sizeof(struct stm32_cryp_ctx),
- .base.cra_alignmask = 0xf,
+ .base.cra_alignmask = 0,
.base.cra_module = THIS_MODULE,
.init = stm32_cryp_init_tfm,
@@ -1921,7 +1617,7 @@ static struct skcipher_alg crypto_algs[] = {
.base.cra_flags = CRYPTO_ALG_ASYNC,
.base.cra_blocksize = DES_BLOCK_SIZE,
.base.cra_ctxsize = sizeof(struct stm32_cryp_ctx),
- .base.cra_alignmask = 0xf,
+ .base.cra_alignmask = 0,
.base.cra_module = THIS_MODULE,
.init = stm32_cryp_init_tfm,
@@ -1939,7 +1635,7 @@ static struct skcipher_alg crypto_algs[] = {
.base.cra_flags = CRYPTO_ALG_ASYNC,
.base.cra_blocksize = DES_BLOCK_SIZE,
.base.cra_ctxsize = sizeof(struct stm32_cryp_ctx),
- .base.cra_alignmask = 0xf,
+ .base.cra_alignmask = 0,
.base.cra_module = THIS_MODULE,
.init = stm32_cryp_init_tfm,
@@ -1956,7 +1652,7 @@ static struct skcipher_alg crypto_algs[] = {
.base.cra_flags = CRYPTO_ALG_ASYNC,
.base.cra_blocksize = DES_BLOCK_SIZE,
.base.cra_ctxsize = sizeof(struct stm32_cryp_ctx),
- .base.cra_alignmask = 0xf,
+ .base.cra_alignmask = 0,
.base.cra_module = THIS_MODULE,
.init = stm32_cryp_init_tfm,
@@ -1986,7 +1682,7 @@ static struct aead_alg aead_algs[] = {
.cra_flags = CRYPTO_ALG_ASYNC,
.cra_blocksize = 1,
.cra_ctxsize = sizeof(struct stm32_cryp_ctx),
- .cra_alignmask = 0xf,
+ .cra_alignmask = 0,
.cra_module = THIS_MODULE,
},
},
@@ -2006,7 +1702,7 @@ static struct aead_alg aead_algs[] = {
.cra_flags = CRYPTO_ALG_ASYNC,
.cra_blocksize = 1,
.cra_ctxsize = sizeof(struct stm32_cryp_ctx),
- .cra_alignmask = 0xf,
+ .cra_alignmask = 0,
.cra_module = THIS_MODULE,
},
},
--
2.34.1
From: Tom Rix <[email protected]>
commit 214b3369ab9b0a6f28d6c970220c209417edbc65 upstream.
Clang static analysis reports this problem
mtk_eth_soc.c:394:7: warning: Branch condition evaluates
to a garbage value
if (err)
^~~
err is not initialized and only conditionally set.
So intitialize err.
Fixes: 7e538372694b ("net: ethernet: mediatek: Re-add support SGMII")
Signed-off-by: Tom Rix <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/mediatek/mtk_eth_soc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
@@ -215,7 +215,7 @@ static void mtk_mac_config(struct phylin
phylink_config);
struct mtk_eth *eth = mac->hw;
u32 mcr_cur, mcr_new, sid, i;
- int val, ge_mode, err;
+ int val, ge_mode, err = 0;
/* MT76x8 has no hardware settings between for the MAC */
if (!MTK_HAS_CAPS(eth->soc->caps, MTK_SOC_MT7628) &&
From: Stephen Boyd <[email protected]>
commit 489a71964f9d74e697a12cd0ace20ed829eb1f93 upstream.
We don't want vendors to be enabling this part of the clk code and
shipping it to customers. Exposing the ability to change clk frequencies
and parents via debugfs is potentially damaging to the system if folks
don't know what they're doing. Emit a strong warning so that the message
is clear: don't enable this outside of development systems.
Fixes: 37215da5553e ("clk: Add support for setting clk_rate via debugfs")
Cc: Geert Uytterhoeven <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/clk/clk.c | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -3314,6 +3314,24 @@ static int __init clk_debug_init(void)
{
struct clk_core *core;
+#ifdef CLOCK_ALLOW_WRITE_DEBUGFS
+ pr_warn("\n");
+ pr_warn("********************************************************************\n");
+ pr_warn("** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **\n");
+ pr_warn("** **\n");
+ pr_warn("** WRITEABLE clk DebugFS SUPPORT HAS BEEN ENABLED IN THIS KERNEL **\n");
+ pr_warn("** **\n");
+ pr_warn("** This means that this kernel is built to expose clk operations **\n");
+ pr_warn("** such as parent or rate setting, enabling, disabling, etc. **\n");
+ pr_warn("** to userspace, which may compromise security on your system. **\n");
+ pr_warn("** **\n");
+ pr_warn("** If you see this message and you are not debugging the **\n");
+ pr_warn("** kernel, report this immediately to your vendor! **\n");
+ pr_warn("** **\n");
+ pr_warn("** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **\n");
+ pr_warn("********************************************************************\n");
+#endif
+
rootdir = debugfs_create_dir("clk", NULL);
debugfs_create_file("clk_summary", 0444, rootdir, &all_lists,
From: Johan Hovold <[email protected]>
commit 16394e998cbb050730536bdf7e89f5a70efbd974 upstream.
USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.
Fixes: 66e89522aff7 ("V4L/DVB: IR: add mceusb IR receiver driver")
Cc: [email protected] # 2.6.36
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/rc/mceusb.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/drivers/media/rc/mceusb.c
+++ b/drivers/media/rc/mceusb.c
@@ -1430,7 +1430,7 @@ static void mceusb_gen1_init(struct mceu
*/
ret = usb_control_msg(ir->usbdev, usb_rcvctrlpipe(ir->usbdev, 0),
USB_REQ_SET_ADDRESS, USB_TYPE_VENDOR, 0, 0,
- data, USB_CTRL_MSG_SZ, HZ * 3);
+ data, USB_CTRL_MSG_SZ, 3000);
dev_dbg(dev, "set address - ret = %d", ret);
dev_dbg(dev, "set address - data[0] = %d, data[1] = %d",
data[0], data[1]);
@@ -1438,20 +1438,20 @@ static void mceusb_gen1_init(struct mceu
/* set feature: bit rate 38400 bps */
ret = usb_control_msg(ir->usbdev, usb_sndctrlpipe(ir->usbdev, 0),
USB_REQ_SET_FEATURE, USB_TYPE_VENDOR,
- 0xc04e, 0x0000, NULL, 0, HZ * 3);
+ 0xc04e, 0x0000, NULL, 0, 3000);
dev_dbg(dev, "set feature - ret = %d", ret);
/* bRequest 4: set char length to 8 bits */
ret = usb_control_msg(ir->usbdev, usb_sndctrlpipe(ir->usbdev, 0),
4, USB_TYPE_VENDOR,
- 0x0808, 0x0000, NULL, 0, HZ * 3);
+ 0x0808, 0x0000, NULL, 0, 3000);
dev_dbg(dev, "set char length - retB = %d", ret);
/* bRequest 2: set handshaking to use DTR/DSR */
ret = usb_control_msg(ir->usbdev, usb_sndctrlpipe(ir->usbdev, 0),
2, USB_TYPE_VENDOR,
- 0x0000, 0x0100, NULL, 0, HZ * 3);
+ 0x0000, 0x0100, NULL, 0, 3000);
dev_dbg(dev, "set handshake - retC = %d", ret);
/* device resume */
From: Adrian Hunter <[email protected]>
commit 62942e9fda9fd1def10ffcbd5e1c025b3c9eec17 upstream.
Using grep -C with perf script -D can give erroneous results as grep loses
lines due to non-printable characters, for example, below the 0020, 0060
and 0070 lines are missing:
$ perf script -D | grep -C10 AUX | head
. 0010: 08 00 00 00 00 00 00 00 1f 00 00 00 00 00 00 00 ................
. 0030: 01 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 ................
. 0040: 00 08 00 00 00 00 00 00 02 00 00 00 00 00 00 00 ................
. 0050: 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 ................
. 0080: 02 00 00 00 00 00 00 00 1b 00 00 00 00 00 00 00 ................
. 0090: 00 00 00 00 00 00 00 00 ........
0 0 0x450 [0x98]: PERF_RECORD_AUXTRACE_INFO type: 1
PMU Type 8
Time Shift 31
perf's isprint() is a custom implementation from the kernel, but the
kernel's _ctype appears to include characters from Latin-1 Supplement which
is not compatible with, for example, UTF-8. Fix by checking also isascii().
After:
$ tools/perf/perf script -D | grep -C10 AUX | head
. 0010: 08 00 00 00 00 00 00 00 1f 00 00 00 00 00 00 00 ................
. 0020: 03 84 32 2f 00 00 00 00 63 7c 4f d2 fa ff ff ff ..2/....c|O.....
. 0030: 01 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 ................
. 0040: 00 08 00 00 00 00 00 00 02 00 00 00 00 00 00 00 ................
. 0050: 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 ................
. 0060: 00 02 00 00 00 00 00 00 00 c0 03 00 00 00 00 00 ................
. 0070: e2 00 00 00 00 00 00 00 02 00 00 00 00 00 00 00 ................
. 0080: 02 00 00 00 00 00 00 00 1b 00 00 00 00 00 00 00 ................
. 0090: 00 00 00 00 00 00 00 00 ........
Fixes: 3052ba56bcb58904 ("tools perf: Move from sane_ctype.h obtained from git to the Linux's original")
Signed-off-by: Adrian Hunter <[email protected]>
Cc: Jiri Olsa <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/perf/util/debug.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/tools/perf/util/debug.c
+++ b/tools/perf/util/debug.c
@@ -145,7 +145,7 @@ static int trace_event_printer(enum bina
break;
case BINARY_PRINT_CHAR_DATA:
printed += color_fprintf(fp, color, "%c",
- isprint(ch) ? ch : '.');
+ isprint(ch) && isascii(ch) ? ch : '.');
break;
case BINARY_PRINT_CHAR_PAD:
printed += color_fprintf(fp, color, " ");
From: Thomas Hellström <[email protected]>
commit 95d35838880fb040ccb9fe4a48816bd0c8b62df5 upstream.
If a dma_fence_array is reported signaled by a call to
dma_fence_is_signaled(), it may leak the PENDING_ERROR status.
Fix this by clearing the PENDING_ERROR status if we return true in
dma_fence_array_signaled().
v2:
- Update Cc list, and add R-b.
Fixes: 1f70b8b812f3 ("dma-fence: Propagate errors to dma-fence-array container")
Cc: Chris Wilson <[email protected]>
Cc: Sumit Semwal <[email protected]>
Cc: Gustavo Padovan <[email protected]>
Cc: Christian König <[email protected]>
Cc: "Christian König" <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: <[email protected]> # v5.4+
Signed-off-by: Thomas Hellström <[email protected]>
Reviewed-by: Christian König <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/dma-buf/dma-fence-array.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
--- a/drivers/dma-buf/dma-fence-array.c
+++ b/drivers/dma-buf/dma-fence-array.c
@@ -104,7 +104,11 @@ static bool dma_fence_array_signaled(str
{
struct dma_fence_array *array = to_dma_fence_array(fence);
- return atomic_read(&array->num_pending) <= 0;
+ if (atomic_read(&array->num_pending) > 0)
+ return false;
+
+ dma_fence_array_clear_pending_error(array);
+ return true;
}
static void dma_fence_array_release(struct dma_fence *fence)
From: Krzysztof Kozlowski <[email protected]>
commit dded08927ca3c31a5c37f8e7f95fe98770475dd4 upstream.
Syzbot detected a NULL pointer dereference of nfc_llcp_sock->dev pointer
(which is a 'struct nfc_dev *') with calls to llcp_sock_sendmsg() after
a failed llcp_sock_bind(). The message being sent is a SOCK_DGRAM.
KASAN report:
BUG: KASAN: null-ptr-deref in nfc_alloc_send_skb+0x2d/0xc0
Read of size 4 at addr 00000000000005c8 by task llcp_sock_nfc_a/899
CPU: 5 PID: 899 Comm: llcp_sock_nfc_a Not tainted 5.16.0-rc6-next-20211224-00001-gc6437fbf18b0 #125
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x45/0x59
? nfc_alloc_send_skb+0x2d/0xc0
__kasan_report.cold+0x117/0x11c
? mark_lock+0x480/0x4f0
? nfc_alloc_send_skb+0x2d/0xc0
kasan_report+0x38/0x50
nfc_alloc_send_skb+0x2d/0xc0
nfc_llcp_send_ui_frame+0x18c/0x2a0
? nfc_llcp_send_i_frame+0x230/0x230
? __local_bh_enable_ip+0x86/0xe0
? llcp_sock_connect+0x470/0x470
? llcp_sock_connect+0x470/0x470
sock_sendmsg+0x8e/0xa0
____sys_sendmsg+0x253/0x3f0
...
The issue was visible only with multiple simultaneous calls to bind() and
sendmsg(), which resulted in most of the bind() calls to fail. The
bind() was failing on checking if there is available WKS/SDP/SAP
(respective bit in 'struct nfc_llcp_local' fields). When there was no
available WKS/SDP/SAP, the bind returned error but the sendmsg() to such
socket was able to trigger mentioned NULL pointer dereference of
nfc_llcp_sock->dev.
The code looks simply racy and currently it protects several paths
against race with checks for (!nfc_llcp_sock->local) which is NULL-ified
in error paths of bind(). The llcp_sock_sendmsg() did not have such
check but called function nfc_llcp_send_ui_frame() had, although not
protected with lock_sock().
Therefore the race could look like (same socket is used all the time):
CPU0 CPU1
==== ====
llcp_sock_bind()
- lock_sock()
- success
- release_sock()
- return 0
llcp_sock_sendmsg()
- lock_sock()
- release_sock()
llcp_sock_bind(), same socket
- lock_sock()
- error
- nfc_llcp_send_ui_frame()
- if (!llcp_sock->local)
- llcp_sock->local = NULL
- nfc_put_device(dev)
- dereference llcp_sock->dev
- release_sock()
- return -ERRNO
The nfc_llcp_send_ui_frame() checked llcp_sock->local outside of the
lock, which is racy and ineffective check. Instead, its caller
llcp_sock_sendmsg(), should perform the check inside lock_sock().
Reported-and-tested-by: [email protected]
Fixes: b874dec21d1c ("NFC: Implement LLCP connection less Tx path")
Cc: <[email protected]>
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/nfc/llcp_sock.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/net/nfc/llcp_sock.c
+++ b/net/nfc/llcp_sock.c
@@ -789,6 +789,11 @@ static int llcp_sock_sendmsg(struct sock
lock_sock(sk);
+ if (!llcp_sock->local) {
+ release_sock(sk);
+ return -ENODEV;
+ }
+
if (sk->sk_type == SOCK_DGRAM) {
DECLARE_SOCKADDR(struct sockaddr_nfc_llcp *, addr,
msg->msg_name);
From: Christian Eggers <[email protected]>
commit f53d4c109a666bf1a4883b45d546fba079258717 upstream.
gpmi_io clock needs to be gated off when changing the parent/dividers of
enfc_clk_root (i.MX6Q/i.MX6UL) respectively qspi2_clk_root (i.MX6SX).
Otherwise this rate change can lead to an unresponsive GPMI core which
results in DMA timeouts and failed driver probe:
[ 4.072318] gpmi-nand 112000.gpmi-nand: DMA timeout, last DMA
...
[ 4.370355] gpmi-nand 112000.gpmi-nand: Chip: 0, Error -110
...
[ 4.375988] gpmi-nand 112000.gpmi-nand: Chip: 0, Error -22
[ 4.381524] gpmi-nand 112000.gpmi-nand: Error in ECC-based read: -22
[ 4.387988] gpmi-nand 112000.gpmi-nand: Chip: 0, Error -22
[ 4.393535] gpmi-nand 112000.gpmi-nand: Chip: 0, Error -22
...
Other than stated in i.MX 6 erratum ERR007117, it should be sufficient
to gate only gpmi_io because all other bch/nand clocks are derived from
different clock roots.
The i.MX6 reference manuals state that changing clock muxers can cause
glitches but are silent about changing dividers. But tests showed that
these glitches can definitely happen on i.MX6ULL. For i.MX7D/8MM in turn,
the manual guarantees that no glitches can happen when changing
dividers.
Co-developed-by: Stefan Riedmueller <[email protected]>
Signed-off-by: Stefan Riedmueller <[email protected]>
Signed-off-by: Christian Eggers <[email protected]>
Cc: [email protected]
Acked-by: Han Xu <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c | 28 +++++++++++++++++++++++++---
1 file changed, 25 insertions(+), 3 deletions(-)
--- a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
@@ -711,14 +711,32 @@ static void gpmi_nfc_compute_timings(str
(use_half_period ? BM_GPMI_CTRL1_HALF_PERIOD : 0);
}
-static void gpmi_nfc_apply_timings(struct gpmi_nand_data *this)
+static int gpmi_nfc_apply_timings(struct gpmi_nand_data *this)
{
struct gpmi_nfc_hardware_timing *hw = &this->hw;
struct resources *r = &this->resources;
void __iomem *gpmi_regs = r->gpmi_regs;
unsigned int dll_wait_time_us;
+ int ret;
+
+ /* Clock dividers do NOT guarantee a clean clock signal on its output
+ * during the change of the divide factor on i.MX6Q/UL/SX. On i.MX7/8,
+ * all clock dividers provide these guarantee.
+ */
+ if (GPMI_IS_MX6Q(this) || GPMI_IS_MX6SX(this))
+ clk_disable_unprepare(r->clock[0]);
+
+ ret = clk_set_rate(r->clock[0], hw->clk_rate);
+ if (ret) {
+ dev_err(this->dev, "cannot set clock rate to %lu Hz: %d\n", hw->clk_rate, ret);
+ return ret;
+ }
- clk_set_rate(r->clock[0], hw->clk_rate);
+ if (GPMI_IS_MX6Q(this) || GPMI_IS_MX6SX(this)) {
+ ret = clk_prepare_enable(r->clock[0]);
+ if (ret)
+ return ret;
+ }
writel(hw->timing0, gpmi_regs + HW_GPMI_TIMING0);
writel(hw->timing1, gpmi_regs + HW_GPMI_TIMING1);
@@ -737,6 +755,8 @@ static void gpmi_nfc_apply_timings(struc
/* Wait for the DLL to settle. */
udelay(dll_wait_time_us);
+
+ return 0;
}
static int gpmi_setup_interface(struct nand_chip *chip, int chipnr,
@@ -2278,7 +2298,9 @@ static int gpmi_nfc_exec_op(struct nand_
*/
if (this->hw.must_apply_timings) {
this->hw.must_apply_timings = false;
- gpmi_nfc_apply_timings(this);
+ ret = gpmi_nfc_apply_timings(this);
+ if (ret)
+ return ret;
}
dev_dbg(this->dev, "%s: %d instructions\n", __func__, op->ninstrs);
From: Stefan Riedmueller <[email protected]>
commit aa1baa0e6c1aa4872e481dce4fc7fd6f3dd8496b upstream.
There is no need to explicitly set the default gpmi clock rate during
boot for the i.MX 6 since this is done during nand_detect anyway.
Signed-off-by: Stefan Riedmueller <[email protected]>
Cc: [email protected]
Acked-by: Han Xu <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c | 9 ---------
1 file changed, 9 deletions(-)
--- a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
@@ -1052,15 +1052,6 @@ static int gpmi_get_clks(struct gpmi_nan
r->clock[i] = clk;
}
- if (GPMI_IS_MX6(this))
- /*
- * Set the default value for the gpmi clock.
- *
- * If you want to use the ONFI nand which is in the
- * Synchronous Mode, you should change the clock as you need.
- */
- clk_set_rate(r->clock[0], 22000000);
-
return 0;
err_clock:
From: Jonathan Cameron <[email protected]>
commit c9791a94384af07592d29504004d2255dbaf8663 upstream.
Unfortuanately a non standards compliant ACPI ID is known to be
in the wild on some AAEON boards.
Partly revert the removal of these IDs so that ADC081C will again
work + add a comment to that affect for future reference.
Whilst here use generic firmware properties rather than the ACPI
specific handling previously found in this driver.
Reported-by: Kunyang Fan <[email protected]>
Fixes: c458b7ca3fd0 ("iio:adc:ti-adc081c: Drop ACPI ids that seem very unlikely to be official.")
Signed-off-by: Jonathan Cameron <[email protected]>
Cc: Andy Shevchenko <[email protected]>
Tested-by: Kunyang Fan <[email protected]> #UP-extremei11
Link: https://lore.kernel.org/r/[email protected]
Cc: <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/iio/adc/ti-adc081c.c | 22 +++++++++++++++++-----
1 file changed, 17 insertions(+), 5 deletions(-)
--- a/drivers/iio/adc/ti-adc081c.c
+++ b/drivers/iio/adc/ti-adc081c.c
@@ -19,6 +19,7 @@
#include <linux/i2c.h>
#include <linux/module.h>
#include <linux/mod_devicetable.h>
+#include <linux/property.h>
#include <linux/iio/iio.h>
#include <linux/iio/buffer.h>
@@ -151,13 +152,16 @@ static int adc081c_probe(struct i2c_clie
{
struct iio_dev *iio;
struct adc081c *adc;
- struct adcxx1c_model *model;
+ const struct adcxx1c_model *model;
int err;
if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA))
return -EOPNOTSUPP;
- model = &adcxx1c_models[id->driver_data];
+ if (dev_fwnode(&client->dev))
+ model = device_get_match_data(&client->dev);
+ else
+ model = &adcxx1c_models[id->driver_data];
iio = devm_iio_device_alloc(&client->dev, sizeof(*adc));
if (!iio)
@@ -224,10 +228,17 @@ static const struct i2c_device_id adc081
};
MODULE_DEVICE_TABLE(i2c, adc081c_id);
+static const struct acpi_device_id adc081c_acpi_match[] = {
+ /* Used on some AAEON boards */
+ { "ADC081C", (kernel_ulong_t)&adcxx1c_models[ADC081C] },
+ { }
+};
+MODULE_DEVICE_TABLE(acpi, adc081c_acpi_match);
+
static const struct of_device_id adc081c_of_match[] = {
- { .compatible = "ti,adc081c" },
- { .compatible = "ti,adc101c" },
- { .compatible = "ti,adc121c" },
+ { .compatible = "ti,adc081c", .data = &adcxx1c_models[ADC081C] },
+ { .compatible = "ti,adc101c", .data = &adcxx1c_models[ADC101C] },
+ { .compatible = "ti,adc121c", .data = &adcxx1c_models[ADC121C] },
{ }
};
MODULE_DEVICE_TABLE(of, adc081c_of_match);
@@ -236,6 +247,7 @@ static struct i2c_driver adc081c_driver
.driver = {
.name = "adc081c",
.of_match_table = adc081c_of_match,
+ .acpi_match_table = adc081c_acpi_match,
},
.probe = adc081c_probe,
.remove = adc081c_remove,
From: Benjamin Li <[email protected]>
[ Upstream commit cfdf6b19e750f7de8ae71a26932f63b52e3bf74c ]
The linear mapping between the BD rate field and the driver's 5GHz
legacy rates table (wcn_5ghz_rates) does not only apply for the latter
four rates -- it applies to all eight rates.
Fixes: 6ea131acea98 ("wcn36xx: Fix warning due to bad rate_idx")
Signed-off-by: Benjamin Li <[email protected]>
Tested-by: Loic Poulain <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/wcn36xx/txrx.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/net/wireless/ath/wcn36xx/txrx.c b/drivers/net/wireless/ath/wcn36xx/txrx.c
index f76de106570d2..f33e7228a1010 100644
--- a/drivers/net/wireless/ath/wcn36xx/txrx.c
+++ b/drivers/net/wireless/ath/wcn36xx/txrx.c
@@ -237,7 +237,6 @@ int wcn36xx_rx_skb(struct wcn36xx *wcn, struct sk_buff *skb)
const struct wcn36xx_rate *rate;
struct ieee80211_hdr *hdr;
struct wcn36xx_rx_bd *bd;
- struct ieee80211_supported_band *sband;
u16 fc, sn;
/*
@@ -295,12 +294,11 @@ int wcn36xx_rx_skb(struct wcn36xx *wcn, struct sk_buff *skb)
status.enc_flags = rate->encoding_flags;
status.bw = rate->bw;
status.rate_idx = rate->mcs_or_legacy_index;
- sband = wcn->hw->wiphy->bands[status.band];
status.nss = 1;
if (status.band == NL80211_BAND_5GHZ &&
status.encoding == RX_ENC_LEGACY &&
- status.rate_idx >= sband->n_bitrates) {
+ status.rate_idx >= 4) {
/* no dsss rates in 5Ghz rates table */
status.rate_idx -= 4;
}
--
2.34.1
From: Tsuchiya Yuto <[email protected]>
[ Upstream commit 5bfbf65fcca7325e4d89d289b3c286e11220e386 ]
When comparing with intel-aero atomisp [1], it looks like
punit_ddr_dvfs_enable() should take `false` as an argument on mrfld_power
up case.
Code from the intel-aero kernel [1]:
int atomisp_mrfld_power_down(struct atomisp_device *isp)
{
[...]
/*WA:Enable DVFS*/
if (IS_CHT)
punit_ddr_dvfs_enable(true);
int atomisp_mrfld_power_up(struct atomisp_device *isp)
{
[...]
/*WA for PUNIT, if DVFS enabled, ISP timeout observed*/
if (IS_CHT)
punit_ddr_dvfs_enable(false);
This patch fixes the inverted argument as per the intel-aero code, as
well as its comment. While here, fix space issues for comments in
atomisp_mrfld_power().
Note that it does not seem to be possible to unify the up/down cases for
punit_ddr_dvfs_enable(), i.e., we can't do something like the following:
if (IS_CHT)
punit_ddr_dvfs_enable(!enable);
because according to the intel-aero code [1], the DVFS is disabled
before "writing 0x0 to ISPSSPM0 bit[1:0]" and the DVFS is enabled after
"writing 0x3 to ISPSSPM0 bit[1:0]".
[1] https://github.com/intel-aero/linux-kernel/blob/a1b673258feb915268377275130c5c5df0eafc82/drivers/media/pci/atomisp/atomisp_driver/atomisp_v4l2.c#L431-L514
Fixes: 0f441fd70b1e ("media: atomisp: simplify the power down/up code")
Signed-off-by: Tsuchiya Yuto <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/staging/media/atomisp/pci/atomisp_v4l2.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/staging/media/atomisp/pci/atomisp_v4l2.c b/drivers/staging/media/atomisp/pci/atomisp_v4l2.c
index d35506f643609..687e94e8b6ce5 100644
--- a/drivers/staging/media/atomisp/pci/atomisp_v4l2.c
+++ b/drivers/staging/media/atomisp/pci/atomisp_v4l2.c
@@ -711,15 +711,15 @@ static int atomisp_mrfld_power(struct atomisp_device *isp, bool enable)
dev_dbg(isp->dev, "IUNIT power-%s.\n", enable ? "on" : "off");
- /*WA:Enable DVFS*/
+ /* WA for P-Unit, if DVFS enabled, ISP timeout observed */
if (IS_CHT && enable)
- punit_ddr_dvfs_enable(true);
+ punit_ddr_dvfs_enable(false);
/*
* FIXME:WA for ECS28A, with this sleep, CTS
* android.hardware.camera2.cts.CameraDeviceTest#testCameraDeviceAbort
* PASS, no impact on other platforms
- */
+ */
if (IS_BYT && enable)
msleep(10);
@@ -727,7 +727,7 @@ static int atomisp_mrfld_power(struct atomisp_device *isp, bool enable)
iosf_mbi_modify(BT_MBI_UNIT_PMC, MBI_REG_READ, MRFLD_ISPSSPM0,
val, MRFLD_ISPSSPM0_ISPSSC_MASK);
- /*WA:Enable DVFS*/
+ /* WA:Enable DVFS */
if (IS_CHT && !enable)
punit_ddr_dvfs_enable(true);
--
2.34.1
From: Bryan O'Donoghue <[email protected]>
[ Upstream commit 89dcb1da611d9b3ff0728502d58372fdaae9ebff ]
Right now we have a broken sequence where we enable DMA channel interrupts
which can be left enabled and never disabled if we hit an error path.
Worse still when we unload the driver, the DMA channel interrupt bits are
left intact. About the only saving grace here is that we do remember to
disable the wcnss interrupt when unload the driver.
Fixes: 8e84c2582169 ("wcn36xx: mac80211 driver for Qualcomm WCN3660/WCN3680 hardware")
Signed-off-by: Bryan O'Donoghue <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/wcn36xx/dxe.c | 38 ++++++++++++++++++--------
1 file changed, 27 insertions(+), 11 deletions(-)
diff --git a/drivers/net/wireless/ath/wcn36xx/dxe.c b/drivers/net/wireless/ath/wcn36xx/dxe.c
index cf4eb0fb28151..0909d0c423cbb 100644
--- a/drivers/net/wireless/ath/wcn36xx/dxe.c
+++ b/drivers/net/wireless/ath/wcn36xx/dxe.c
@@ -272,6 +272,21 @@ static int wcn36xx_dxe_enable_ch_int(struct wcn36xx *wcn, u16 wcn_ch)
return 0;
}
+static void wcn36xx_dxe_disable_ch_int(struct wcn36xx *wcn, u16 wcn_ch)
+{
+ int reg_data = 0;
+
+ wcn36xx_dxe_read_register(wcn,
+ WCN36XX_DXE_INT_MASK_REG,
+ ®_data);
+
+ reg_data &= ~wcn_ch;
+
+ wcn36xx_dxe_write_register(wcn,
+ WCN36XX_DXE_INT_MASK_REG,
+ (int)reg_data);
+}
+
static int wcn36xx_dxe_fill_skb(struct device *dev,
struct wcn36xx_dxe_ctl *ctl,
gfp_t gfp)
@@ -869,7 +884,6 @@ int wcn36xx_dxe_init(struct wcn36xx *wcn)
WCN36XX_DXE_WQ_TX_L);
wcn36xx_dxe_read_register(wcn, WCN36XX_DXE_REG_CH_EN, ®_data);
- wcn36xx_dxe_enable_ch_int(wcn, WCN36XX_INT_MASK_CHAN_TX_L);
/***************************************/
/* Init descriptors for TX HIGH channel */
@@ -893,9 +907,6 @@ int wcn36xx_dxe_init(struct wcn36xx *wcn)
wcn36xx_dxe_read_register(wcn, WCN36XX_DXE_REG_CH_EN, ®_data);
- /* Enable channel interrupts */
- wcn36xx_dxe_enable_ch_int(wcn, WCN36XX_INT_MASK_CHAN_TX_H);
-
/***************************************/
/* Init descriptors for RX LOW channel */
/***************************************/
@@ -905,7 +916,6 @@ int wcn36xx_dxe_init(struct wcn36xx *wcn)
goto out_err_rxl_ch;
}
-
/* For RX we need to preallocated buffers */
wcn36xx_dxe_ch_alloc_skb(wcn, &wcn->dxe_rx_l_ch);
@@ -928,9 +938,6 @@ int wcn36xx_dxe_init(struct wcn36xx *wcn)
WCN36XX_DXE_REG_CTL_RX_L,
WCN36XX_DXE_CH_DEFAULT_CTL_RX_L);
- /* Enable channel interrupts */
- wcn36xx_dxe_enable_ch_int(wcn, WCN36XX_INT_MASK_CHAN_RX_L);
-
/***************************************/
/* Init descriptors for RX HIGH channel */
/***************************************/
@@ -962,15 +969,18 @@ int wcn36xx_dxe_init(struct wcn36xx *wcn)
WCN36XX_DXE_REG_CTL_RX_H,
WCN36XX_DXE_CH_DEFAULT_CTL_RX_H);
- /* Enable channel interrupts */
- wcn36xx_dxe_enable_ch_int(wcn, WCN36XX_INT_MASK_CHAN_RX_H);
-
ret = wcn36xx_dxe_request_irqs(wcn);
if (ret < 0)
goto out_err_irq;
timer_setup(&wcn->tx_ack_timer, wcn36xx_dxe_tx_timer, 0);
+ /* Enable channel interrupts */
+ wcn36xx_dxe_enable_ch_int(wcn, WCN36XX_INT_MASK_CHAN_TX_L);
+ wcn36xx_dxe_enable_ch_int(wcn, WCN36XX_INT_MASK_CHAN_TX_H);
+ wcn36xx_dxe_enable_ch_int(wcn, WCN36XX_INT_MASK_CHAN_RX_L);
+ wcn36xx_dxe_enable_ch_int(wcn, WCN36XX_INT_MASK_CHAN_RX_H);
+
return 0;
out_err_irq:
@@ -987,6 +997,12 @@ out_err_txh_ch:
void wcn36xx_dxe_deinit(struct wcn36xx *wcn)
{
+ /* Disable channel interrupts */
+ wcn36xx_dxe_disable_ch_int(wcn, WCN36XX_INT_MASK_CHAN_RX_H);
+ wcn36xx_dxe_disable_ch_int(wcn, WCN36XX_INT_MASK_CHAN_RX_L);
+ wcn36xx_dxe_disable_ch_int(wcn, WCN36XX_INT_MASK_CHAN_TX_H);
+ wcn36xx_dxe_disable_ch_int(wcn, WCN36XX_INT_MASK_CHAN_TX_L);
+
free_irq(wcn->tx_irq, wcn);
free_irq(wcn->rx_irq, wcn);
del_timer(&wcn->tx_ack_timer);
--
2.34.1
From: Baoquan He <[email protected]>
commit a674e48c5443d12a8a43c3ac42367aa39505d506 upstream.
Currently three dma atomic pools are initialized as long as the relevant
kernel codes are built in. While in kdump kernel of x86_64, this is not
right when trying to create atomic_pool_dma, because there's no managed
pages in DMA zone. In the case, DMA zone only has low 1M memory
presented and locked down by memblock allocator. So no pages are added
into buddy of DMA zone. Please check commit f1d4d47c5851 ("x86/setup:
Always reserve the first 1M of RAM").
Then in kdump kernel of x86_64, it always prints below failure message:
DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations
swapper/0: page allocation failure: order:5, mode:0xcc1(GFP_KERNEL|GFP_DMA), nodemask=(null),cpuset=/,mems_allowed=0
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.13.0-0.rc5.20210611git929d931f2b40.42.fc35.x86_64 #1
Hardware name: Dell Inc. PowerEdge R910/0P658H, BIOS 2.12.0 06/04/2018
Call Trace:
dump_stack+0x7f/0xa1
warn_alloc.cold+0x72/0xd6
__alloc_pages_slowpath.constprop.0+0xf29/0xf50
__alloc_pages+0x24d/0x2c0
alloc_page_interleave+0x13/0xb0
atomic_pool_expand+0x118/0x210
__dma_atomic_pool_init+0x45/0x93
dma_atomic_pool_init+0xdb/0x176
do_one_initcall+0x67/0x320
kernel_init_freeable+0x290/0x2dc
kernel_init+0xa/0x111
ret_from_fork+0x22/0x30
Mem-Info:
......
DMA: failed to allocate 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocation
DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
Here, let's check if DMA zone has managed pages, then create
atomic_pool_dma if yes. Otherwise just skip it.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 6f599d84231f ("x86/kdump: Always reserve the low 1M when the crashkernel option is specified")
Signed-off-by: Baoquan He <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Acked-by: John Donnelly <[email protected]>
Reviewed-by: David Hildenbrand <[email protected]>
Cc: Marek Szyprowski <[email protected]>
Cc: Robin Murphy <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Christoph Lameter <[email protected]>
Cc: David Laight <[email protected]>
Cc: David Rientjes <[email protected]>
Cc: Hyeonggon Yoo <[email protected]>
Cc: Joonsoo Kim <[email protected]>
Cc: Pekka Enberg <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/dma/pool.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/kernel/dma/pool.c
+++ b/kernel/dma/pool.c
@@ -206,7 +206,7 @@ static int __init dma_atomic_pool_init(v
GFP_KERNEL);
if (!atomic_pool_kernel)
ret = -ENOMEM;
- if (IS_ENABLED(CONFIG_ZONE_DMA)) {
+ if (has_managed_dma()) {
atomic_pool_dma = __dma_atomic_pool_init(atomic_pool_size,
GFP_KERNEL | GFP_DMA);
if (!atomic_pool_dma)
@@ -229,7 +229,7 @@ static inline struct gen_pool *dma_guess
if (prev == NULL) {
if (IS_ENABLED(CONFIG_ZONE_DMA32) && (gfp & GFP_DMA32))
return atomic_pool_dma32;
- if (IS_ENABLED(CONFIG_ZONE_DMA) && (gfp & GFP_DMA))
+ if (atomic_pool_dma && (gfp & GFP_DMA))
return atomic_pool_dma;
return atomic_pool_kernel;
}
From: Brian Norris <[email protected]>
commit e584cdc1549932f87a2707b56bc588cfac5d89e0 upstream.
Since commit 43c2de1002d2 ("drm/rockchip: dsi: move all lane config except
LCDC mux to bind()"), we perform most HW configuration in the bind()
function. This configuration may be lost on suspend/resume, so we
need to call it again. That may lead to errors like this after system
suspend/resume:
dw-mipi-dsi-rockchip ff968000.mipi: failed to write command FIFO
panel-kingdisplay-kd097d04 ff960000.mipi.0: failed write init cmds: -110
Tested on Acer Chromebook Tab 10 (RK3399 Gru-Scarlet).
Note that early mailing list versions of this driver borrowed Rockchip's
downstream/BSP solution, to do HW configuration in mode_set() (which
*is* called at the appropriate pre-enable() times), but that was
discarded along the way. I've avoided that still, because mode_set()
documentation doesn't suggest this kind of purpose as far as I can tell.
Fixes: 43c2de1002d2 ("drm/rockchip: dsi: move all lane config except LCDC mux to bind()")
Cc: <[email protected]>
Signed-off-by: Brian Norris <[email protected]>
Reviewed-by: Chen-Yu Tsai <[email protected]>
Tested-by: Nícolas F. R. A. Prado <[email protected]>
Signed-off-by: Heiko Stuebner <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20210928143413.v3.2.I4e9d93aadb00b1ffc7d506e3186a25492bf0b732@changeid
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c | 37 ++++++++++++++++++++++++
1 file changed, 37 insertions(+)
--- a/drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c
+++ b/drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c
@@ -243,6 +243,8 @@ struct dw_mipi_dsi_rockchip {
struct dw_mipi_dsi *dmd;
const struct rockchip_dw_dsi_chip_data *cdata;
struct dw_mipi_dsi_plat_data pdata;
+
+ bool dsi_bound;
};
struct dphy_pll_parameter_map {
@@ -944,6 +946,8 @@ static int dw_mipi_dsi_rockchip_bind(str
goto out_pll_clk;
}
+ dsi->dsi_bound = true;
+
return 0;
out_pll_clk:
@@ -965,6 +969,8 @@ static void dw_mipi_dsi_rockchip_unbind(
if (dsi->is_slave)
return;
+ dsi->dsi_bound = false;
+
dw_mipi_dsi_unbind(dsi->dmd);
clk_disable_unprepare(dsi->pllref_clk);
@@ -1029,6 +1035,36 @@ static const struct dw_mipi_dsi_host_ops
.detach = dw_mipi_dsi_rockchip_host_detach,
};
+static int __maybe_unused dw_mipi_dsi_rockchip_resume(struct device *dev)
+{
+ struct dw_mipi_dsi_rockchip *dsi = dev_get_drvdata(dev);
+ int ret;
+
+ /*
+ * Re-configure DSI state, if we were previously initialized. We need
+ * to do this before rockchip_drm_drv tries to re-enable() any panels.
+ */
+ if (dsi->dsi_bound) {
+ ret = clk_prepare_enable(dsi->grf_clk);
+ if (ret) {
+ DRM_DEV_ERROR(dsi->dev, "Failed to enable grf_clk: %d\n", ret);
+ return ret;
+ }
+
+ dw_mipi_dsi_rockchip_config(dsi);
+ if (dsi->slave)
+ dw_mipi_dsi_rockchip_config(dsi->slave);
+
+ clk_disable_unprepare(dsi->grf_clk);
+ }
+
+ return 0;
+}
+
+static const struct dev_pm_ops dw_mipi_dsi_rockchip_pm_ops = {
+ SET_LATE_SYSTEM_SLEEP_PM_OPS(NULL, dw_mipi_dsi_rockchip_resume)
+};
+
static int dw_mipi_dsi_rockchip_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -1248,6 +1284,7 @@ struct platform_driver dw_mipi_dsi_rockc
.remove = dw_mipi_dsi_rockchip_remove,
.driver = {
.of_match_table = dw_mipi_dsi_rockchip_dt_ids,
+ .pm = &dw_mipi_dsi_rockchip_pm_ops,
.name = "dw-mipi-dsi-rockchip",
},
};
From: Srinivas Kandagatla <[email protected]>
[ Upstream commit c02b360ca67ebeb9de07b47b2fe53f964c2561d1 ]
Currently Soundcard has 1 rx device for headset and SoundWire Speaker Playback.
This setup has issues, ex if we try to play on headset the audio stream is
also sent to SoundWire Speakers and we will hear sound in both headsets and speakers.
Make a separate device for Speakers and Headset so that the streams are
different and handled properly.
Fixes: 45021d35fcb2 ("arm64: dts: qcom: c630: Enable audio support")
Signed-off-by: Srinivas Kandagatla <[email protected]>
Tested-by: Steev Klimaszewski <[email protected]>
Signed-off-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
.../boot/dts/qcom/sdm850-lenovo-yoga-c630.dts | 27 +++++++++++++++++++
1 file changed, 27 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
index ad6561843ba28..e080c317b5e3d 100644
--- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
+++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
@@ -365,6 +365,10 @@
dai@1 {
reg = <1>;
};
+
+ dai@2 {
+ reg = <2>;
+ };
};
&sound {
@@ -377,6 +381,7 @@
"SpkrLeft IN", "SPK1 OUT",
"SpkrRight IN", "SPK2 OUT",
"MM_DL1", "MultiMedia1 Playback",
+ "MM_DL3", "MultiMedia3 Playback",
"MultiMedia2 Capture", "MM_UL2";
mm1-dai-link {
@@ -393,6 +398,13 @@
};
};
+ mm3-dai-link {
+ link-name = "MultiMedia3";
+ cpu {
+ sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>;
+ };
+ };
+
slim-dai-link {
link-name = "SLIM Playback";
cpu {
@@ -422,6 +434,21 @@
sound-dai = <&wcd9340 1>;
};
};
+
+ slim-wcd-dai-link {
+ link-name = "SLIM WCD Playback";
+ cpu {
+ sound-dai = <&q6afedai SLIMBUS_1_RX>;
+ };
+
+ platform {
+ sound-dai = <&q6routing>;
+ };
+
+ codec {
+ sound-dai = <&wcd9340 2>;
+ };
+ };
};
&tlmm {
--
2.34.1
From: Maxime Ripard <[email protected]>
[ Upstream commit 5517357a4733d7cf7c17fc79d0530cfa47add372 ]
The driver currently tries to pick the closest rate that is lower than
the rate being requested.
This causes an issue with clk_set_min_rate() since it actively checks
for the rounded rate to be above the minimum that was just set.
Let's change the logic a bit to pick the closest rate to the requested
rate, no matter if it's actually higher or lower.
Fixes: 6d18b8adbe67 ("clk: bcm2835: Support for clock parent selection")
Signed-off-by: Maxime Ripard <[email protected]>
Acked-by: Stephen Boyd <[email protected]>
Reviewed-by: Nicolas Saenz Julienne <[email protected]>
Tested-by: Nicolas Saenz Julienne <[email protected]> # boot and basic functionality
Tested-by: Michael Stapelberg <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/bcm/clk-bcm2835.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/clk/bcm/clk-bcm2835.c b/drivers/clk/bcm/clk-bcm2835.c
index 1ac803e14fa3e..a919ee9c3fcb8 100644
--- a/drivers/clk/bcm/clk-bcm2835.c
+++ b/drivers/clk/bcm/clk-bcm2835.c
@@ -1217,7 +1217,7 @@ static int bcm2835_clock_determine_rate(struct clk_hw *hw,
rate = bcm2835_clock_choose_div_and_prate(hw, i, req->rate,
&div, &prate,
&avgrate);
- if (rate > best_rate && rate <= req->rate) {
+ if (abs(req->rate - rate) < abs(req->rate - best_rate)) {
best_parent = parent;
best_prate = prate;
best_rate = rate;
--
2.34.1
From: Brian Norris <[email protected]>
[ Upstream commit 5a614570172e1c9f59035d259dd735acd4f1c01b ]
Fix some error handling here noticed in review of other changes.
Fixes: 2d4f7bdafd70 ("drm/rockchip: dsi: migrate to use dw-mipi-dsi bridge driver")
Signed-off-by: Brian Norris <[email protected]>
Reported-by: Chen-Yu Tsai <[email protected]>
Reviewed-by: Chen-Yu Tsai <[email protected]>
Tested-by: Nícolas F. R. A. Prado <[email protected]>
Signed-off-by: Heiko Stuebner <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20210928143413.v3.4.I8bb7a91ecc411d56bc155763faa15f289d7fc074@changeid
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c b/drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c
index d3cea42dde436..6691e45230126 100644
--- a/drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c
+++ b/drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c
@@ -923,7 +923,7 @@ static int dw_mipi_dsi_rockchip_bind(struct device *dev,
ret = clk_prepare_enable(dsi->grf_clk);
if (ret) {
DRM_DEV_ERROR(dsi->dev, "Failed to enable grf_clk: %d\n", ret);
- goto out_pm_runtime;
+ goto out_pll_clk;
}
dw_mipi_dsi_rockchip_config(dsi);
@@ -935,17 +935,19 @@ static int dw_mipi_dsi_rockchip_bind(struct device *dev,
ret = rockchip_dsi_drm_create_encoder(dsi, drm_dev);
if (ret) {
DRM_DEV_ERROR(dev, "Failed to create drm encoder\n");
- goto out_pm_runtime;
+ goto out_pll_clk;
}
ret = dw_mipi_dsi_bind(dsi->dmd, &dsi->encoder);
if (ret) {
DRM_DEV_ERROR(dev, "Failed to bind: %d\n", ret);
- goto out_pm_runtime;
+ goto out_pll_clk;
}
return 0;
+out_pll_clk:
+ clk_disable_unprepare(dsi->pllref_clk);
out_pm_runtime:
pm_runtime_put(dsi->dev);
if (dsi->slave)
--
2.34.1
From: Baoquan He <[email protected]>
commit 62b3107073646e0946bd97ff926832bafb846d17 upstream.
Patch series "Handle warning of allocation failure on DMA zone w/o
managed pages", v4.
**Problem observed:
On x86_64, when crash is triggered and entering into kdump kernel, page
allocation failure can always be seen.
---------------------------------
DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations
swapper/0: page allocation failure: order:5, mode:0xcc1(GFP_KERNEL|GFP_DMA), nodemask=(null),cpuset=/,mems_allowed=0
CPU: 0 PID: 1 Comm: swapper/0
Call Trace:
dump_stack+0x7f/0xa1
warn_alloc.cold+0x72/0xd6
......
__alloc_pages+0x24d/0x2c0
......
dma_atomic_pool_init+0xdb/0x176
do_one_initcall+0x67/0x320
? rcu_read_lock_sched_held+0x3f/0x80
kernel_init_freeable+0x290/0x2dc
? rest_init+0x24f/0x24f
kernel_init+0xa/0x111
ret_from_fork+0x22/0x30
Mem-Info:
------------------------------------
***Root cause:
In the current kernel, it assumes that DMA zone must have managed pages
and try to request pages if CONFIG_ZONE_DMA is enabled. While this is not
always true. E.g in kdump kernel of x86_64, only low 1M is presented and
locked down at very early stage of boot, so that this low 1M won't be
added into buddy allocator to become managed pages of DMA zone. This
exception will always cause page allocation failure if page is requested
from DMA zone.
***Investigation:
This failure happens since below commit merged into linus's tree.
1a6a9044b967 x86/setup: Remove CONFIG_X86_RESERVE_LOW and reservelow= options
23721c8e92f7 x86/crash: Remove crash_reserve_low_1M()
f1d4d47c5851 x86/setup: Always reserve the first 1M of RAM
7c321eb2b843 x86/kdump: Remove the backup region handling
6f599d84231f x86/kdump: Always reserve the low 1M when the crashkernel option is specified
Before them, on x86_64, the low 640K area will be reused by kdump kernel.
So in kdump kernel, the content of low 640K area is copied into a backup
region for dumping before jumping into kdump. Then except of those firmware
reserved region in [0, 640K], the left area will be added into buddy
allocator to become available managed pages of DMA zone.
However, after above commits applied, in kdump kernel of x86_64, the low
1M is reserved by memblock, but not released to buddy allocator. So any
later page allocation requested from DMA zone will fail.
At the beginning, if crashkernel is reserved, the low 1M need be locked
down because AMD SME encrypts memory making the old backup region
mechanims impossible when switching into kdump kernel.
Later, it was also observed that there are BIOSes corrupting memory
under 1M. To solve this, in commit f1d4d47c5851, the entire region of
low 1M is always reserved after the real mode trampoline is allocated.
Besides, recently, Intel engineer mentioned their TDX (Trusted domain
extensions) which is under development in kernel also needs to lock down
the low 1M. So we can't simply revert above commits to fix the page allocation
failure from DMA zone as someone suggested.
***Solution:
Currently, only DMA atomic pool and dma-kmalloc will initialize and
request page allocation with GFP_DMA during bootup.
So only initializ DMA atomic pool when DMA zone has available managed
pages, otherwise just skip the initialization.
For dma-kmalloc(), for the time being, let's mute the warning of
allocation failure if requesting pages from DMA zone while no manged
pages. Meanwhile, change code to use dma_alloc_xx/dma_map_xx API to
replace kmalloc(GFP_DMA), or do not use GFP_DMA when calling kmalloc() if
not necessary. Christoph is posting patches to fix those under
drivers/scsi/. Finally, we can remove the need of dma-kmalloc() as people
suggested.
This patch (of 3):
In some places of the current kernel, it assumes that dma zone must have
managed pages if CONFIG_ZONE_DMA is enabled. While this is not always
true. E.g in kdump kernel of x86_64, only low 1M is presented and locked
down at very early stage of boot, so that there's no managed pages at all
in DMA zone. This exception will always cause page allocation failure if
page is requested from DMA zone.
Here add function has_managed_dma() and the relevant helper functions to
check if there's DMA zone with managed pages. It will be used in later
patches.
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 6f599d84231f ("x86/kdump: Always reserve the low 1M when the crashkernel option is specified")
Signed-off-by: Baoquan He <[email protected]>
Reviewed-by: David Hildenbrand <[email protected]>
Acked-by: John Donnelly <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Christoph Lameter <[email protected]>
Cc: Hyeonggon Yoo <[email protected]>
Cc: Pekka Enberg <[email protected]>
Cc: David Rientjes <[email protected]>
Cc: Joonsoo Kim <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Cc: David Laight <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Marek Szyprowski <[email protected]>
Cc: Robin Murphy <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/linux/mmzone.h | 9 +++++++++
mm/page_alloc.c | 15 +++++++++++++++
2 files changed, 24 insertions(+)
--- a/include/linux/mmzone.h
+++ b/include/linux/mmzone.h
@@ -938,6 +938,15 @@ static inline int is_highmem_idx(enum zo
#endif
}
+#ifdef CONFIG_ZONE_DMA
+bool has_managed_dma(void);
+#else
+static inline bool has_managed_dma(void)
+{
+ return false;
+}
+#endif
+
/**
* is_highmem - helper function to quickly check if a struct zone is a
* highmem zone or not. This is an attempt to keep references
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -8903,3 +8903,18 @@ bool take_page_off_buddy(struct page *pa
return ret;
}
#endif
+
+#ifdef CONFIG_ZONE_DMA
+bool has_managed_dma(void)
+{
+ struct pglist_data *pgdat;
+
+ for_each_online_pgdat(pgdat) {
+ struct zone *zone = &pgdat->node_zones[ZONE_DMA];
+
+ if (managed_zone(zone))
+ return true;
+ }
+ return false;
+}
+#endif /* CONFIG_ZONE_DMA */
From: Johan Hovold <[email protected]>
commit 6aa6e70cdb5b863a57bad61310bf89b6617a5d2d upstream.
USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.
Fixes: 9cb2173e6ea8 ("[media] media: Add stk1160 new driver (easycap replacement)")
Cc: [email protected] # 3.7
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/usb/stk1160/stk1160-core.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/media/usb/stk1160/stk1160-core.c
+++ b/drivers/media/usb/stk1160/stk1160-core.c
@@ -65,7 +65,7 @@ int stk1160_read_reg(struct stk1160 *dev
return -ENOMEM;
ret = usb_control_msg(dev->udev, pipe, 0x00,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
- 0x00, reg, buf, sizeof(u8), HZ);
+ 0x00, reg, buf, sizeof(u8), 1000);
if (ret < 0) {
stk1160_err("read failed on reg 0x%x (%d)\n",
reg, ret);
@@ -85,7 +85,7 @@ int stk1160_write_reg(struct stk1160 *de
ret = usb_control_msg(dev->udev, pipe, 0x01,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
- value, reg, NULL, 0, HZ);
+ value, reg, NULL, 0, 1000);
if (ret < 0) {
stk1160_err("write failed on reg 0x%x (%d)\n",
reg, ret);
From: Christophe Leroy <[email protected]>
[ Upstream commit 33dc3e3e99e626ce51f462d883b05856c6c30b1d ]
sparse warnings: (new ones prefixed by >>)
>> drivers/w1/slaves/w1_ds28e04.c:342:13: sparse: sparse: incorrect type in initializer (different address spaces) @@ expected char [noderef] __user *_pu_addr @@ got char *buf @@
drivers/w1/slaves/w1_ds28e04.c:342:13: sparse: expected char [noderef] __user *_pu_addr
drivers/w1/slaves/w1_ds28e04.c:342:13: sparse: got char *buf
>> drivers/w1/slaves/w1_ds28e04.c:356:13: sparse: sparse: incorrect type in initializer (different address spaces) @@ expected char const [noderef] __user *_gu_addr @@ got char const *buf @@
drivers/w1/slaves/w1_ds28e04.c:356:13: sparse: expected char const [noderef] __user *_gu_addr
drivers/w1/slaves/w1_ds28e04.c:356:13: sparse: got char const *buf
The buffer buf is a failsafe buffer in kernel space, it's not user
memory hence doesn't deserve the use of get_user() or put_user().
Access 'buf' content directly.
Link: https://lore.kernel.org/lkml/[email protected]/T/
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Christophe Leroy <[email protected]>
Link: https://lore.kernel.org/r/d14ed8d71ad4372e6839ae427f91441d3ba0e94d.1637946316.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/w1/slaves/w1_ds28e04.c | 26 ++++++--------------------
1 file changed, 6 insertions(+), 20 deletions(-)
diff --git a/drivers/w1/slaves/w1_ds28e04.c b/drivers/w1/slaves/w1_ds28e04.c
index e4f336111edc6..6cef6e2edb892 100644
--- a/drivers/w1/slaves/w1_ds28e04.c
+++ b/drivers/w1/slaves/w1_ds28e04.c
@@ -32,7 +32,7 @@ static int w1_strong_pullup = 1;
module_param_named(strong_pullup, w1_strong_pullup, int, 0);
/* enable/disable CRC checking on DS28E04-100 memory accesses */
-static char w1_enable_crccheck = 1;
+static bool w1_enable_crccheck = true;
#define W1_EEPROM_SIZE 512
#define W1_PAGE_COUNT 16
@@ -339,32 +339,18 @@ static BIN_ATTR_RW(pio, 1);
static ssize_t crccheck_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
- if (put_user(w1_enable_crccheck + 0x30, buf))
- return -EFAULT;
-
- return sizeof(w1_enable_crccheck);
+ return sysfs_emit(buf, "%d\n", w1_enable_crccheck);
}
static ssize_t crccheck_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
- char val;
-
- if (count != 1 || !buf)
- return -EINVAL;
+ int err = kstrtobool(buf, &w1_enable_crccheck);
- if (get_user(val, buf))
- return -EFAULT;
+ if (err)
+ return err;
- /* convert to decimal */
- val = val - 0x30;
- if (val != 0 && val != 1)
- return -EINVAL;
-
- /* set the new value */
- w1_enable_crccheck = val;
-
- return sizeof(w1_enable_crccheck);
+ return count;
}
static DEVICE_ATTR_RW(crccheck);
--
2.34.1
From: Robert Schlabbach <[email protected]>
[ Upstream commit a6441ea29cb2c9314654e093a1cd8020b9b851c8 ]
Commit e955f959ac52 ("media: si2157: Better check for running tuner in
init") completely broke the "warm" tuner detection of the si2157 driver
due to a simple endian error: The Si2157 CRYSTAL_TRIM property code is
0x0402 and needs to be transmitted LSB first. However, it was inserted
MSB first, causing the warm detection to always fail and spam the kernel
log with tuner initialization messages each time the DVB frontend
device was closed and reopened:
[ 312.215682] si2157 16-0060: found a 'Silicon Labs Si2157-A30'
[ 312.264334] si2157 16-0060: firmware version: 3.0.5
[ 342.248593] si2157 16-0060: found a 'Silicon Labs Si2157-A30'
[ 342.295743] si2157 16-0060: firmware version: 3.0.5
[ 372.328574] si2157 16-0060: found a 'Silicon Labs Si2157-A30'
[ 372.385035] si2157 16-0060: firmware version: 3.0.5
Also, the reinitializations were observed disturb _other_ tuners on
multi-tuner cards such as the Hauppauge WinTV-QuadHD, leading to missed
or errored packets when one of the other DVB frontend devices on that
card was opened.
Fix the order of the property code bytes to make the warm detection work
again, also reducing the tuner initialization message in the kernel log
to once per power-on, as well as fixing the interference with other
tuners.
Link: https://lore.kernel.org/linux-media/trinity-2a86eb9d-6264-4387-95e1-ba7b79a4050f-1638392923493@3c-app-gmx-bap03
Fixes: e955f959ac52 ("media: si2157: Better check for running tuner in init")
Reported-by: Robert Schlabbach <[email protected]>
Signed-off-by: Robert Schlabbach <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/tuners/si2157.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/media/tuners/si2157.c b/drivers/media/tuners/si2157.c
index fefb2625f6558..75ddf7ed1faff 100644
--- a/drivers/media/tuners/si2157.c
+++ b/drivers/media/tuners/si2157.c
@@ -90,7 +90,7 @@ static int si2157_init(struct dvb_frontend *fe)
dev_dbg(&client->dev, "\n");
/* Try to get Xtal trim property, to verify tuner still running */
- memcpy(cmd.args, "\x15\x00\x04\x02", 4);
+ memcpy(cmd.args, "\x15\x00\x02\x04", 4);
cmd.wlen = 4;
cmd.rlen = 4;
ret = si2157_cmd_execute(client, &cmd);
--
2.34.1
From: Li Hua <[email protected]>
[ Upstream commit 9b58e976b3b391c0cf02e038d53dd0478ed3013c ]
When rt_runtime is modified from -1 to a valid control value, it may
cause the task to be throttled all the time. Operations like the following
will trigger the bug. E.g:
1. echo -1 > /proc/sys/kernel/sched_rt_runtime_us
2. Run a FIFO task named A that executes while(1)
3. echo 950000 > /proc/sys/kernel/sched_rt_runtime_us
When rt_runtime is -1, The rt period timer will not be activated when task
A enqueued. And then the task will be throttled after setting rt_runtime to
950,000. The task will always be throttled because the rt period timer is
not activated.
Fixes: d0b27fa77854 ("sched: rt-group: synchonised bandwidth period")
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Li Hua <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/sched/rt.c | 23 ++++++++++++++++++-----
1 file changed, 18 insertions(+), 5 deletions(-)
diff --git a/kernel/sched/rt.c b/kernel/sched/rt.c
index b5cf418e2e3fe..41b14d9242039 100644
--- a/kernel/sched/rt.c
+++ b/kernel/sched/rt.c
@@ -52,11 +52,8 @@ void init_rt_bandwidth(struct rt_bandwidth *rt_b, u64 period, u64 runtime)
rt_b->rt_period_timer.function = sched_rt_period_timer;
}
-static void start_rt_bandwidth(struct rt_bandwidth *rt_b)
+static inline void do_start_rt_bandwidth(struct rt_bandwidth *rt_b)
{
- if (!rt_bandwidth_enabled() || rt_b->rt_runtime == RUNTIME_INF)
- return;
-
raw_spin_lock(&rt_b->rt_runtime_lock);
if (!rt_b->rt_period_active) {
rt_b->rt_period_active = 1;
@@ -75,6 +72,14 @@ static void start_rt_bandwidth(struct rt_bandwidth *rt_b)
raw_spin_unlock(&rt_b->rt_runtime_lock);
}
+static void start_rt_bandwidth(struct rt_bandwidth *rt_b)
+{
+ if (!rt_bandwidth_enabled() || rt_b->rt_runtime == RUNTIME_INF)
+ return;
+
+ do_start_rt_bandwidth(rt_b);
+}
+
void init_rt_rq(struct rt_rq *rt_rq)
{
struct rt_prio_array *array;
@@ -1022,13 +1027,17 @@ static void update_curr_rt(struct rq *rq)
for_each_sched_rt_entity(rt_se) {
struct rt_rq *rt_rq = rt_rq_of_se(rt_se);
+ int exceeded;
if (sched_rt_runtime(rt_rq) != RUNTIME_INF) {
raw_spin_lock(&rt_rq->rt_runtime_lock);
rt_rq->rt_time += delta_exec;
- if (sched_rt_runtime_exceeded(rt_rq))
+ exceeded = sched_rt_runtime_exceeded(rt_rq);
+ if (exceeded)
resched_curr(rq);
raw_spin_unlock(&rt_rq->rt_runtime_lock);
+ if (exceeded)
+ do_start_rt_bandwidth(sched_rt_bandwidth(rt_rq));
}
}
}
@@ -2727,8 +2736,12 @@ static int sched_rt_global_validate(void)
static void sched_rt_do_global(void)
{
+ unsigned long flags;
+
+ raw_spin_lock_irqsave(&def_rt_bandwidth.rt_runtime_lock, flags);
def_rt_bandwidth.rt_runtime = global_rt_runtime();
def_rt_bandwidth.rt_period = ns_to_ktime(global_rt_period());
+ raw_spin_unlock_irqrestore(&def_rt_bandwidth.rt_runtime_lock, flags);
}
int sched_rt_handler(struct ctl_table *table, int write, void *buffer,
--
2.34.1
From: Jason Gerecke <[email protected]>
commit 20f3cf5f860f9f267a6a6e5642d3d0525edb1814 upstream.
If we ever see a touch report with contact count data we initialize
several variables used to read the contact count in the pre-report
phase. These variables are never reset if we process a report which
doesn't contain a contact count, however. This can cause the pre-
report function to trigger a read of arbitrary memory (e.g. NULL
if we're lucky) and potentially crash the driver.
This commit restores resetting of the variables back to default
"none" values that were used prior to the commit mentioned
below.
Link: https://github.com/linuxwacom/input-wacom/issues/276
Fixes: 003f50ab673c (HID: wacom: Update last_slot_field during pre_report phase)
CC: [email protected]
Signed-off-by: Jason Gerecke <[email protected]>
Reviewed-by: Ping Cheng <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/hid/wacom_wac.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/hid/wacom_wac.c
+++ b/drivers/hid/wacom_wac.c
@@ -2654,6 +2654,10 @@ static void wacom_wac_finger_pre_report(
hid_data->confidence = true;
+ hid_data->cc_report = 0;
+ hid_data->cc_index = -1;
+ hid_data->cc_value_index = -1;
+
for (i = 0; i < report->maxfield; i++) {
struct hid_field *field = report->field[i];
int j;
From: Christophe Leroy <[email protected]>
[ Upstream commit df1f679d19edb9eeb67cc2f96b29375f21991945 ]
KeyWest i2c @0xf8001003 irq 42 /uni-n@f8000000/i2c@f8001000
BUG: key c2d00cbc has not been registered!
------------[ cut here ]------------
DEBUG_LOCKS_WARN_ON(1)
WARNING: CPU: 0 PID: 1 at kernel/locking/lockdep.c:4801 lockdep_init_map_type+0x4c0/0xb4c
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.15.5-gentoo-PowerMacG4 #9
NIP: c01a9428 LR: c01a9428 CTR: 00000000
REGS: e1033cf0 TRAP: 0700 Not tainted (5.15.5-gentoo-PowerMacG4)
MSR: 00029032 <EE,ME,IR,DR,RI> CR: 24002002 XER: 00000000
GPR00: c01a9428 e1033db0 c2d1cf20 00000016 00000004 00000001 c01c0630 e1033a73
GPR08: 00000000 00000000 00000000 e1033db0 24002004 00000000 f8729377 00000003
GPR16: c1829a9c 00000000 18305357 c1416fc0 c1416f80 c006ac60 c2d00ca8 c1416f00
GPR24: 00000000 c21586f0 c2160000 00000000 c2d00cbc c2170000 c216e1a0 c2160000
NIP [c01a9428] lockdep_init_map_type+0x4c0/0xb4c
LR [c01a9428] lockdep_init_map_type+0x4c0/0xb4c
Call Trace:
[e1033db0] [c01a9428] lockdep_init_map_type+0x4c0/0xb4c (unreliable)
[e1033df0] [c1c177b8] kw_i2c_add+0x334/0x424
[e1033e20] [c1c18294] pmac_i2c_init+0x9ec/0xa9c
[e1033e80] [c1c1a790] smp_core99_probe+0xbc/0x35c
[e1033eb0] [c1c03cb0] kernel_init_freeable+0x190/0x5a4
[e1033f10] [c000946c] kernel_init+0x28/0x154
[e1033f30] [c0035148] ret_from_kernel_thread+0x14/0x1c
Add missing lockdep_register_key()
Reported-by: Erhard Furtner <[email protected]>
Signed-off-by: Christophe Leroy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/69e4f55565bb45ebb0843977801b245af0c666fe.1638264741.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/platforms/powermac/low_i2c.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/powerpc/platforms/powermac/low_i2c.c b/arch/powerpc/platforms/powermac/low_i2c.c
index 09bfe4b8f25aa..df89d916236d9 100644
--- a/arch/powerpc/platforms/powermac/low_i2c.c
+++ b/arch/powerpc/platforms/powermac/low_i2c.c
@@ -582,6 +582,7 @@ static void __init kw_i2c_add(struct pmac_i2c_host_kw *host,
bus->close = kw_i2c_close;
bus->xfer = kw_i2c_xfer;
mutex_init(&bus->mutex);
+ lockdep_register_key(&bus->lock_key);
lockdep_set_class(&bus->mutex, &bus->lock_key);
if (controller == busnode)
bus->flags = pmac_i2c_multibus;
--
2.34.1
From: Alexey Kardashevskiy <[email protected]>
[ Upstream commit 511d25d6b789fffcb20a3eb71899cf974a31bd9d ]
The userspace can trigger "vmalloc size %lu allocation failure: exceeds
total pages" via the KVM_SET_USER_MEMORY_REGION ioctl.
This silences the warning by checking the limit before calling vzalloc()
and returns ENOMEM if failed.
This does not call underlying valloc helpers as __vmalloc_node() is only
exported when CONFIG_TEST_VMALLOC_MODULE and __vmalloc_node_range() is
not exported at all.
Spotted by syzkaller.
Signed-off-by: Alexey Kardashevskiy <[email protected]>
[mpe: Use 'size' for the variable rather than 'cb']
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/kvm/book3s_hv.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c
index 175967a195c44..527c205d5a5f5 100644
--- a/arch/powerpc/kvm/book3s_hv.c
+++ b/arch/powerpc/kvm/book3s_hv.c
@@ -4557,8 +4557,12 @@ static int kvmppc_core_prepare_memory_region_hv(struct kvm *kvm,
unsigned long npages = mem->memory_size >> PAGE_SHIFT;
if (change == KVM_MR_CREATE) {
- slot->arch.rmap = vzalloc(array_size(npages,
- sizeof(*slot->arch.rmap)));
+ unsigned long size = array_size(npages, sizeof(*slot->arch.rmap));
+
+ if ((size >> PAGE_SHIFT) > totalram_pages())
+ return -ENOMEM;
+
+ slot->arch.rmap = vzalloc(size);
if (!slot->arch.rmap)
return -ENOMEM;
}
--
2.34.1
From: Srinivas Kandagatla <[email protected]>
[ Upstream commit 86192251033308bb42f1e9813c962989d8ed07ec ]
For some reason we never set the size for nvmem sysfs binary file.
Set this.
Reported-by: Gilles BULOZ <[email protected]>
Signed-off-by: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/nvmem/core.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/nvmem/core.c b/drivers/nvmem/core.c
index 6b170083cd248..21d89d80d0838 100644
--- a/drivers/nvmem/core.c
+++ b/drivers/nvmem/core.c
@@ -222,6 +222,8 @@ static umode_t nvmem_bin_attr_is_visible(struct kobject *kobj,
struct device *dev = kobj_to_dev(kobj);
struct nvmem_device *nvmem = to_nvmem_device(dev);
+ attr->size = nvmem->size;
+
return nvmem_bin_attr_get_umode(nvmem);
}
--
2.34.1
From: Christoph Hellwig <[email protected]>
[ Upstream commit d94d94969a4ba07a43d62429c60372320519c391 ]
The allocated buffers are used as a command payload, for which the block
layer and/or DMA API do the proper bounce buffering if needed.
Link: https://lore.kernel.org/r/[email protected]
Reported-by: Baoquan He <[email protected]>
Reviewed-by: Baoquan He <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/sr.c | 2 +-
drivers/scsi/sr_vendor.c | 4 ++--
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/scsi/sr.c b/drivers/scsi/sr.c
index 4cb4ab9c6137e..464418413ced0 100644
--- a/drivers/scsi/sr.c
+++ b/drivers/scsi/sr.c
@@ -917,7 +917,7 @@ static void get_capabilities(struct scsi_cd *cd)
/* allocate transfer buffer */
- buffer = kmalloc(512, GFP_KERNEL | GFP_DMA);
+ buffer = kmalloc(512, GFP_KERNEL);
if (!buffer) {
sr_printk(KERN_ERR, cd, "out of memory.\n");
return;
diff --git a/drivers/scsi/sr_vendor.c b/drivers/scsi/sr_vendor.c
index 1f988a1b9166f..a61635326ae0a 100644
--- a/drivers/scsi/sr_vendor.c
+++ b/drivers/scsi/sr_vendor.c
@@ -131,7 +131,7 @@ int sr_set_blocklength(Scsi_CD *cd, int blocklength)
if (cd->vendor == VENDOR_TOSHIBA)
density = (blocklength > 2048) ? 0x81 : 0x83;
- buffer = kmalloc(512, GFP_KERNEL | GFP_DMA);
+ buffer = kmalloc(512, GFP_KERNEL);
if (!buffer)
return -ENOMEM;
@@ -179,7 +179,7 @@ int sr_cd_check(struct cdrom_device_info *cdi)
if (cd->cdi.mask & CDC_MULTI_SESSION)
return 0;
- buffer = kmalloc(512, GFP_KERNEL | GFP_DMA);
+ buffer = kmalloc(512, GFP_KERNEL);
if (!buffer)
return -ENOMEM;
--
2.34.1
From: Meng Li <[email protected]>
commit efd21e10fc3bf4c6da122470a5ae89ec4ed8d180 upstream.
When enable the kernel debug config, there is below calltrace detected:
BUG: using smp_processor_id() in preemptible [00000000] code: cryptomgr_test/339
caller is debug_smp_processor_id+0x20/0x30
CPU: 9 PID: 339 Comm: cryptomgr_test Not tainted 5.10.63-yocto-standard #1
Hardware name: NXP Layerscape LX2160ARDB (DT)
Call trace:
dump_backtrace+0x0/0x1a0
show_stack+0x24/0x30
dump_stack+0xf0/0x13c
check_preemption_disabled+0x100/0x110
debug_smp_processor_id+0x20/0x30
dpaa2_caam_enqueue+0x10c/0x25c
......
cryptomgr_test+0x38/0x60
kthread+0x158/0x164
ret_from_fork+0x10/0x38
According to the comment in commit ac5d15b4519f("crypto: caam/qi2
- use affine DPIOs "), because preemption is no longer disabled
while trying to enqueue an FQID, it might be possible to run the
enqueue on a different CPU(due to migration, when in process context),
however this wouldn't be a functionality issue. But there will be
above calltrace when enable kernel debug config. So, replace this_cpu_ptr
with raw_cpu_ptr to avoid above call trace.
Fixes: ac5d15b4519f ("crypto: caam/qi2 - use affine DPIOs")
Cc: [email protected]
Signed-off-by: Meng Li <[email protected]>
Reviewed-by: Horia Geantă <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/crypto/caam/caamalg_qi2.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/crypto/caam/caamalg_qi2.c
+++ b/drivers/crypto/caam/caamalg_qi2.c
@@ -5467,7 +5467,7 @@ int dpaa2_caam_enqueue(struct device *de
dpaa2_fd_set_len(&fd, dpaa2_fl_get_len(&req->fd_flt[1]));
dpaa2_fd_set_flc(&fd, req->flc_dma);
- ppriv = this_cpu_ptr(priv->ppriv);
+ ppriv = raw_cpu_ptr(priv->ppriv);
for (i = 0; i < (priv->dpseci_attr.num_tx_queues << 1); i++) {
err = dpaa2_io_service_enqueue_fq(ppriv->dpio, ppriv->req_fqid,
&fd);
From: Gang Li <[email protected]>
commit 62c9827cbb996c2c04f615ecd783ce28bcea894b upstream.
Fix a data race in commit 779750d20b93 ("shmem: split huge pages beyond
i_size under memory pressure").
Here are call traces causing race:
Call Trace 1:
shmem_unused_huge_shrink+0x3ae/0x410
? __list_lru_walk_one.isra.5+0x33/0x160
super_cache_scan+0x17c/0x190
shrink_slab.part.55+0x1ef/0x3f0
shrink_node+0x10e/0x330
kswapd+0x380/0x740
kthread+0xfc/0x130
? mem_cgroup_shrink_node+0x170/0x170
? kthread_create_on_node+0x70/0x70
ret_from_fork+0x1f/0x30
Call Trace 2:
shmem_evict_inode+0xd8/0x190
evict+0xbe/0x1c0
do_unlinkat+0x137/0x330
do_syscall_64+0x76/0x120
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
A simple explanation:
Image there are 3 items in the local list (@list). In the first
traversal, A is not deleted from @list.
1) A->B->C
^
|
pos (leave)
In the second traversal, B is deleted from @list. Concurrently, A is
deleted from @list through shmem_evict_inode() since last reference
counter of inode is dropped by other thread. Then the @list is corrupted.
2) A->B->C
^ ^
| |
evict pos (drop)
We should make sure the inode is either on the global list or deleted from
any local list before iput().
Fixed by moving inodes back to global list before we put them.
[[email protected]: coding style fixes]
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 779750d20b93 ("shmem: split huge pages beyond i_size under memory pressure")
Signed-off-by: Gang Li <[email protected]>
Reviewed-by: Muchun Song <[email protected]>
Acked-by: Kirill A. Shutemov <[email protected]>
Cc: Hugh Dickins <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/shmem.c | 37 +++++++++++++++++++++----------------
1 file changed, 21 insertions(+), 16 deletions(-)
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -527,7 +527,7 @@ static unsigned long shmem_unused_huge_s
struct shmem_inode_info *info;
struct page *page;
unsigned long batch = sc ? sc->nr_to_scan : 128;
- int removed = 0, split = 0;
+ int split = 0;
if (list_empty(&sbinfo->shrinklist))
return SHRINK_STOP;
@@ -542,7 +542,6 @@ static unsigned long shmem_unused_huge_s
/* inode is about to be evicted */
if (!inode) {
list_del_init(&info->shrinklist);
- removed++;
goto next;
}
@@ -550,12 +549,12 @@ static unsigned long shmem_unused_huge_s
if (round_up(inode->i_size, PAGE_SIZE) ==
round_up(inode->i_size, HPAGE_PMD_SIZE)) {
list_move(&info->shrinklist, &to_remove);
- removed++;
goto next;
}
list_move(&info->shrinklist, &list);
next:
+ sbinfo->shrinklist_len--;
if (!--batch)
break;
}
@@ -575,7 +574,7 @@ next:
inode = &info->vfs_inode;
if (nr_to_split && split >= nr_to_split)
- goto leave;
+ goto move_back;
page = find_get_page(inode->i_mapping,
(inode->i_size & HPAGE_PMD_MASK) >> PAGE_SHIFT);
@@ -589,38 +588,44 @@ next:
}
/*
- * Leave the inode on the list if we failed to lock
- * the page at this time.
+ * Move the inode on the list back to shrinklist if we failed
+ * to lock the page at this time.
*
* Waiting for the lock may lead to deadlock in the
* reclaim path.
*/
if (!trylock_page(page)) {
put_page(page);
- goto leave;
+ goto move_back;
}
ret = split_huge_page(page);
unlock_page(page);
put_page(page);
- /* If split failed leave the inode on the list */
+ /* If split failed move the inode on the list back to shrinklist */
if (ret)
- goto leave;
+ goto move_back;
split++;
drop:
list_del_init(&info->shrinklist);
- removed++;
-leave:
+ goto put;
+move_back:
+ /*
+ * Make sure the inode is either on the global list or deleted
+ * from any local list before iput() since it could be deleted
+ * in another thread once we put the inode (then the local list
+ * is corrupted).
+ */
+ spin_lock(&sbinfo->shrinklist_lock);
+ list_move(&info->shrinklist, &sbinfo->shrinklist);
+ sbinfo->shrinklist_len++;
+ spin_unlock(&sbinfo->shrinklist_lock);
+put:
iput(inode);
}
- spin_lock(&sbinfo->shrinklist_lock);
- list_splice_tail(&list, &sbinfo->shrinklist);
- sbinfo->shrinklist_len -= removed;
- spin_unlock(&sbinfo->shrinklist_lock);
-
return split;
}
From: Miaoqian Lin <[email protected]>
[ Upstream commit 399c91c3f30531593e5ff6ca7b53f47092128669 ]
The of_device_get_match_data() function may return NULL.
Add check to prevent potential null dereference.
Signed-off-by: Miaoqian Lin <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/mediatek/mtk_mipi_tx.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/gpu/drm/mediatek/mtk_mipi_tx.c b/drivers/gpu/drm/mediatek/mtk_mipi_tx.c
index 8cee2591e7284..ccc742dc78bd9 100644
--- a/drivers/gpu/drm/mediatek/mtk_mipi_tx.c
+++ b/drivers/gpu/drm/mediatek/mtk_mipi_tx.c
@@ -147,6 +147,8 @@ static int mtk_mipi_tx_probe(struct platform_device *pdev)
return -ENOMEM;
mipi_tx->driver_data = of_device_get_match_data(dev);
+ if (!mipi_tx->driver_data)
+ return -ENODEV;
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
mipi_tx->regs = devm_ioremap_resource(dev, mem);
--
2.34.1
From: Tzung-Bi Shih <[email protected]>
[ Upstream commit cb006006fe6221f092fadaffd3f219288304c9ad ]
Fixes the device_node leak.
Signed-off-by: Tzung-Bi Shih <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/mediatek/mt8183/mt8183-da7219-max98357.c | 6 +++++-
sound/soc/mediatek/mt8183/mt8183-mt6358-ts3a227-max98357.c | 7 ++++++-
2 files changed, 11 insertions(+), 2 deletions(-)
diff --git a/sound/soc/mediatek/mt8183/mt8183-da7219-max98357.c b/sound/soc/mediatek/mt8183/mt8183-da7219-max98357.c
index 20d31b69a5c00..9cc0f26b08fbc 100644
--- a/sound/soc/mediatek/mt8183/mt8183-da7219-max98357.c
+++ b/sound/soc/mediatek/mt8183/mt8183-da7219-max98357.c
@@ -787,7 +787,11 @@ static int mt8183_da7219_max98357_dev_probe(struct platform_device *pdev)
return ret;
}
- return devm_snd_soc_register_card(&pdev->dev, card);
+ ret = devm_snd_soc_register_card(&pdev->dev, card);
+
+ of_node_put(platform_node);
+ of_node_put(hdmi_codec);
+ return ret;
}
#ifdef CONFIG_OF
diff --git a/sound/soc/mediatek/mt8183/mt8183-mt6358-ts3a227-max98357.c b/sound/soc/mediatek/mt8183/mt8183-mt6358-ts3a227-max98357.c
index 79ba2f2d84522..14ce8b93597f3 100644
--- a/sound/soc/mediatek/mt8183/mt8183-mt6358-ts3a227-max98357.c
+++ b/sound/soc/mediatek/mt8183/mt8183-mt6358-ts3a227-max98357.c
@@ -720,7 +720,12 @@ mt8183_mt6358_ts3a227_max98357_dev_probe(struct platform_device *pdev)
__func__, ret);
}
- return devm_snd_soc_register_card(&pdev->dev, card);
+ ret = devm_snd_soc_register_card(&pdev->dev, card);
+
+ of_node_put(platform_node);
+ of_node_put(ec_codec);
+ of_node_put(hdmi_codec);
+ return ret;
}
#ifdef CONFIG_OF
--
2.34.1
From: Xiangyang Zhang <[email protected]>
commit dfea08a2116fe327f79d8f4d4b2cf6e0c88be11f upstream.
The 'nmissed' column of the 'kprobe_profile' file for kretprobe is
not showed correctly, kretprobe can be skipped by two reasons,
shortage of kretprobe_instance which is counted by tk->rp.nmissed,
and kprobe itself is missed by some reason, so to show the sum.
Link: https://lkml.kernel.org/r/[email protected]
Cc: [email protected]
Fixes: 4a846b443b4e ("tracing/kprobes: Cleanup kprobe tracer code")
Acked-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Xiangyang Zhang <[email protected]>
Signed-off-by: Steven Rostedt <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/trace/trace_kprobe.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/kernel/trace/trace_kprobe.c
+++ b/kernel/trace/trace_kprobe.c
@@ -1183,15 +1183,18 @@ static int probes_profile_seq_show(struc
{
struct dyn_event *ev = v;
struct trace_kprobe *tk;
+ unsigned long nmissed;
if (!is_trace_kprobe(ev))
return 0;
tk = to_trace_kprobe(ev);
+ nmissed = trace_kprobe_is_return(tk) ?
+ tk->rp.kp.nmissed + tk->rp.nmissed : tk->rp.kp.nmissed;
seq_printf(m, " %-44s %15lu %15lu\n",
trace_probe_name(&tk->tp),
trace_kprobe_nhit(tk),
- tk->rp.kp.nmissed);
+ nmissed);
return 0;
}
From: Will Deacon <[email protected]>
[ Upstream commit 8d9902055c57548bb342dc3ca78caa21e9643024 ]
clear_page() and copy_page() are suitable for use outside of the kernel
address space, so annotate them as position-independent code.
Signed-off-by: Will Deacon <[email protected]>
Signed-off-by: Quentin Perret <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/lib/clear_page.S | 4 ++--
arch/arm64/lib/copy_page.S | 4 ++--
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/lib/clear_page.S b/arch/arm64/lib/clear_page.S
index 073acbf02a7c8..b84b179edba3a 100644
--- a/arch/arm64/lib/clear_page.S
+++ b/arch/arm64/lib/clear_page.S
@@ -14,7 +14,7 @@
* Parameters:
* x0 - dest
*/
-SYM_FUNC_START(clear_page)
+SYM_FUNC_START_PI(clear_page)
mrs x1, dczid_el0
and w1, w1, #0xf
mov x2, #4
@@ -25,5 +25,5 @@ SYM_FUNC_START(clear_page)
tst x0, #(PAGE_SIZE - 1)
b.ne 1b
ret
-SYM_FUNC_END(clear_page)
+SYM_FUNC_END_PI(clear_page)
EXPORT_SYMBOL(clear_page)
diff --git a/arch/arm64/lib/copy_page.S b/arch/arm64/lib/copy_page.S
index e7a793961408d..29144f4cd4492 100644
--- a/arch/arm64/lib/copy_page.S
+++ b/arch/arm64/lib/copy_page.S
@@ -17,7 +17,7 @@
* x0 - dest
* x1 - src
*/
-SYM_FUNC_START(copy_page)
+SYM_FUNC_START_PI(copy_page)
alternative_if ARM64_HAS_NO_HW_PREFETCH
// Prefetch three cache lines ahead.
prfm pldl1strm, [x1, #128]
@@ -75,5 +75,5 @@ alternative_else_nop_endif
stnp x16, x17, [x0, #112 - 256]
ret
-SYM_FUNC_END(copy_page)
+SYM_FUNC_END_PI(copy_page)
EXPORT_SYMBOL(copy_page)
--
2.34.1
From: John David Anglin <[email protected]>
commit db19c6f1a2a353cc8dec35b4789733a3cf6e2838 upstream.
While working on the rewrite to the light-weight syscall and futex code, I
experimented with using a hash index based on the user physical address of
atomic variable. This exposed two problems with the lpa and lpa_user defines.
Because of the copy instruction, the pa argument needs to be an early clobber
argument. This prevents gcc from allocating the va and pa arguments to the same
register.
Secondly, the lpa instruction can cause a page fault so we need to catch
exceptions.
Signed-off-by: John David Anglin <[email protected]>
Fixes: 116d753308cf ("parisc: Use lpa instruction to load physical addresses in driver code")
Signed-off-by: Helge Deller <[email protected]>
Cc: [email protected] # v5.2+
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/parisc/include/asm/special_insns.h | 44 +++++++++++++++++---------------
1 file changed, 24 insertions(+), 20 deletions(-)
--- a/arch/parisc/include/asm/special_insns.h
+++ b/arch/parisc/include/asm/special_insns.h
@@ -2,28 +2,32 @@
#ifndef __PARISC_SPECIAL_INSNS_H
#define __PARISC_SPECIAL_INSNS_H
-#define lpa(va) ({ \
- unsigned long pa; \
- __asm__ __volatile__( \
- "copy %%r0,%0\n\t" \
- "lpa %%r0(%1),%0" \
- : "=r" (pa) \
- : "r" (va) \
- : "memory" \
- ); \
- pa; \
+#define lpa(va) ({ \
+ unsigned long pa; \
+ __asm__ __volatile__( \
+ "copy %%r0,%0\n" \
+ "8:\tlpa %%r0(%1),%0\n" \
+ "9:\n" \
+ ASM_EXCEPTIONTABLE_ENTRY(8b, 9b) \
+ : "=&r" (pa) \
+ : "r" (va) \
+ : "memory" \
+ ); \
+ pa; \
})
-#define lpa_user(va) ({ \
- unsigned long pa; \
- __asm__ __volatile__( \
- "copy %%r0,%0\n\t" \
- "lpa %%r0(%%sr3,%1),%0" \
- : "=r" (pa) \
- : "r" (va) \
- : "memory" \
- ); \
- pa; \
+#define lpa_user(va) ({ \
+ unsigned long pa; \
+ __asm__ __volatile__( \
+ "copy %%r0,%0\n" \
+ "8:\tlpa %%r0(%%sr3,%1),%0\n" \
+ "9:\n" \
+ ASM_EXCEPTIONTABLE_ENTRY(8b, 9b) \
+ : "=&r" (pa) \
+ : "r" (va) \
+ : "memory" \
+ ); \
+ pa; \
})
#define mfctl(reg) ({ \
From: Brian Norris <[email protected]>
commit c4c6ef229593366ab593d4d424addc7025b54a76 upstream.
Prior to commit 6c836d965bad ("drm/rockchip: Use the helpers for PSR"),
"PSR exit" used non-blocking analogix_dp_send_psr_spd(). The refactor
started using the blocking variant, for a variety of reasons -- quoting
Sean Paul's potentially-faulty memory:
"""
- To avoid racing a subsequent PSR entry (if exit takes a long time)
- To avoid racing disable/modeset
- We're not displaying new content while exiting PSR anyways, so there
is minimal utility in allowing frames to be submitted
- We're lying to userspace telling them frames are on the screen when
we're just dropping them on the floor
"""
However, I'm finding that this blocking transition is causing upwards of
60+ ms of unneeded latency on PSR-exit, to the point that initial cursor
movements when leaving PSR are unbearably jumpy.
It turns out that we need to meet in the middle somewhere: Sean is right
that we were "lying to userspace" with a non-blocking PSR-exit, but the
new blocking behavior is also waiting too long:
According to the eDP specification, the sink device must support PSR
entry transitions from both state 4 (ACTIVE_RESYNC) and state 0
(INACTIVE). It also states that in ACTIVE_RESYNC, "the Sink device must
display the incoming active frames from the Source device with no
visible glitches and/or artifacts."
Thus, for our purposes, we only need to wait for ACTIVE_RESYNC before
moving on; we are ready to display video, and subsequent PSR-entry is
safe.
Tested on a Samsung Chromebook Plus (i.e., Rockchip RK3399 Gru Kevin),
where this saves about 60ms of latency, for PSR-exit that used to
take about 80ms.
Fixes: 6c836d965bad ("drm/rockchip: Use the helpers for PSR")
Cc: <[email protected]>
Cc: Zain Wang <[email protected]>
Cc: Tomasz Figa <[email protected]>
Cc: Heiko Stuebner <[email protected]>
Cc: Sean Paul <[email protected]>
Signed-off-by: Brian Norris <[email protected]>
Reviewed-by: Sean Paul <[email protected]>
Signed-off-by: Robert Foss <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20211103135112.v3.1.I67612ea073c3306c71b46a87be894f79707082df@changeid
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c | 14 ++++++++++++--
1 file changed, 12 insertions(+), 2 deletions(-)
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
@@ -1086,11 +1086,21 @@ int analogix_dp_send_psr_spd(struct anal
if (!blocking)
return 0;
+ /*
+ * db[1]!=0: entering PSR, wait for fully active remote frame buffer.
+ * db[1]==0: exiting PSR, wait for either
+ * (a) ACTIVE_RESYNC - the sink "must display the
+ * incoming active frames from the Source device with no visible
+ * glitches and/or artifacts", even though timings may still be
+ * re-synchronizing; or
+ * (b) INACTIVE - the transition is fully complete.
+ */
ret = readx_poll_timeout(analogix_dp_get_psr_status, dp, psr_status,
psr_status >= 0 &&
((vsc->db[1] && psr_status == DP_PSR_SINK_ACTIVE_RFB) ||
- (!vsc->db[1] && psr_status == DP_PSR_SINK_INACTIVE)), 1500,
- DP_TIMEOUT_PSR_LOOP_MS * 1000);
+ (!vsc->db[1] && (psr_status == DP_PSR_SINK_ACTIVE_RESYNC ||
+ psr_status == DP_PSR_SINK_INACTIVE))),
+ 1500, DP_TIMEOUT_PSR_LOOP_MS * 1000);
if (ret) {
dev_warn(dp->dev, "Failed to apply PSR %d\n", ret);
return ret;
From: Hari Bathini <[email protected]>
[ Upstream commit 219572d2fc4135b5ce65c735d881787d48b10e71 ]
Kdump can be triggered after panic_notifers since commit f06e5153f4ae2
("kernel/panic.c: add "crash_kexec_post_notifiers" option for kdump
after panic_notifers") introduced crash_kexec_post_notifiers option.
But using this option would mean smp_send_stop(), that marks all other
CPUs as offline, gets called before kdump is triggered. As a result,
kdump routines fail to save other CPUs' registers. To fix this, kdump
friendly crash_smp_send_stop() function was introduced with kernel
commit 0ee59413c967 ("x86/panic: replace smp_send_stop() with kdump
friendly version in panic path"). Override this kdump friendly weak
function to handle crash_kexec_post_notifiers option appropriately
on powerpc.
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Hari Bathini <[email protected]>
[Fixed signature of crash_stop_this_cpu() - reported by [email protected]]
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/kernel/smp.c | 30 ++++++++++++++++++++++++++++++
1 file changed, 30 insertions(+)
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index 50aeef08aa470..d993f28107afa 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -594,6 +594,36 @@ void crash_send_ipi(void (*crash_ipi_callback)(struct pt_regs *))
}
#endif
+#ifdef CONFIG_NMI_IPI
+static void crash_stop_this_cpu(struct pt_regs *regs)
+#else
+static void crash_stop_this_cpu(void *dummy)
+#endif
+{
+ /*
+ * Just busy wait here and avoid marking CPU as offline to ensure
+ * register data is captured appropriately.
+ */
+ while (1)
+ cpu_relax();
+}
+
+void crash_smp_send_stop(void)
+{
+ static bool stopped = false;
+
+ if (stopped)
+ return;
+
+ stopped = true;
+
+#ifdef CONFIG_NMI_IPI
+ smp_send_nmi_ipi(NMI_IPI_ALL_OTHERS, crash_stop_this_cpu, 1000000);
+#else
+ smp_call_function(crash_stop_this_cpu, NULL, 0);
+#endif /* CONFIG_NMI_IPI */
+}
+
#ifdef CONFIG_NMI_IPI
static void nmi_stop_this_cpu(struct pt_regs *regs)
{
--
2.34.1
From: Joe Thornber <[email protected]>
[ Upstream commit 85bca3c05b6cca31625437eedf2060e846c4bbad ]
Corrupt metadata could trigger an out of bounds write.
Signed-off-by: Joe Thornber <[email protected]>
Signed-off-by: Mike Snitzer <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/md/persistent-data/dm-btree.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/drivers/md/persistent-data/dm-btree.c b/drivers/md/persistent-data/dm-btree.c
index ef6e78d45d5b8..ee3e63aa864bf 100644
--- a/drivers/md/persistent-data/dm-btree.c
+++ b/drivers/md/persistent-data/dm-btree.c
@@ -83,14 +83,16 @@ void inc_children(struct dm_transaction_manager *tm, struct btree_node *n,
}
static int insert_at(size_t value_size, struct btree_node *node, unsigned index,
- uint64_t key, void *value)
- __dm_written_to_disk(value)
+ uint64_t key, void *value)
+ __dm_written_to_disk(value)
{
uint32_t nr_entries = le32_to_cpu(node->header.nr_entries);
+ uint32_t max_entries = le32_to_cpu(node->header.max_entries);
__le64 key_le = cpu_to_le64(key);
if (index > nr_entries ||
- index >= le32_to_cpu(node->header.max_entries)) {
+ index >= max_entries ||
+ nr_entries >= max_entries) {
DMERR("too many entries in btree node for insert");
__dm_unbless_for_disk(value);
return -ENOMEM;
--
2.34.1
From: Rameshkumar Sundaram <[email protected]>
[ Upstream commit 16a2c3d5406f95ef6139de52669c60a39443f5f7 ]
HTT_PPDU_STATS_CFG_PDEV_ID bit mask for target FW PPDU stats request message
was set as bit 8 to 15. Bit 8 is reserved for soc stats and pdev id starts from
bit 9. Hence change the bitmask as bit 9 to 15 and fill the proper pdev id in
the request message.
In commit 701e48a43e15 ("ath11k: add packet log support for QCA6390"), both
HTT_PPDU_STATS_CFG_PDEV_ID and pdev_mask were changed, but this pdev_mask
calculation is not valid for platforms which has multiple pdevs with 1 rxdma
per pdev, as this is writing same value(i.e. 2) for all pdevs. Hence fixed it
to consider pdev_idx as well, to make it compatible for both single and multi
pd cases.
Tested on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-01092-QCAHKSWPL_SILICONZ-1
Tested on: IPQ6018 hw1.0 WLAN.HK.2.5.0.1-01067-QCAHKSWPL_SILICONZ-1
Fixes: 701e48a43e15 ("ath11k: add packet log support for QCA6390")
Co-developed-by: Sathishkumar Muruganandam <[email protected]>
Signed-off-by: Sathishkumar Muruganandam <[email protected]>
Signed-off-by: Rameshkumar Sundaram <[email protected]>
Signed-off-by: Jouni Malinen <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/ath11k/dp.h | 3 ++-
drivers/net/wireless/ath/ath11k/dp_tx.c | 2 +-
2 files changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ath/ath11k/dp.h b/drivers/net/wireless/ath/ath11k/dp.h
index ee8db812589b3..c4972233149f4 100644
--- a/drivers/net/wireless/ath/ath11k/dp.h
+++ b/drivers/net/wireless/ath/ath11k/dp.h
@@ -514,7 +514,8 @@ struct htt_ppdu_stats_cfg_cmd {
} __packed;
#define HTT_PPDU_STATS_CFG_MSG_TYPE GENMASK(7, 0)
-#define HTT_PPDU_STATS_CFG_PDEV_ID GENMASK(15, 8)
+#define HTT_PPDU_STATS_CFG_SOC_STATS BIT(8)
+#define HTT_PPDU_STATS_CFG_PDEV_ID GENMASK(15, 9)
#define HTT_PPDU_STATS_CFG_TLV_TYPE_BITMASK GENMASK(31, 16)
enum htt_ppdu_stats_tag_type {
diff --git a/drivers/net/wireless/ath/ath11k/dp_tx.c b/drivers/net/wireless/ath/ath11k/dp_tx.c
index 21dfd08d3debb..092eee735da29 100644
--- a/drivers/net/wireless/ath/ath11k/dp_tx.c
+++ b/drivers/net/wireless/ath/ath11k/dp_tx.c
@@ -894,7 +894,7 @@ int ath11k_dp_tx_htt_h2t_ppdu_stats_req(struct ath11k *ar, u32 mask)
cmd->msg = FIELD_PREP(HTT_PPDU_STATS_CFG_MSG_TYPE,
HTT_H2T_MSG_TYPE_PPDU_STATS_CFG);
- pdev_mask = 1 << (i + 1);
+ pdev_mask = 1 << (ar->pdev_idx + i);
cmd->msg |= FIELD_PREP(HTT_PPDU_STATS_CFG_PDEV_ID, pdev_mask);
cmd->msg |= FIELD_PREP(HTT_PPDU_STATS_CFG_TLV_TYPE_BITMASK, mask);
--
2.34.1
From: Oleksandr Andrushchenko <[email protected]>
commit ce2f46f3531a03781181b7f4bd1ff9f8c5086e7e upstream.
While working with Xen's libxenvchan library I have faced an issue with
unmap notifications sent in wrong order if both UNMAP_NOTIFY_SEND_EVENT
and UNMAP_NOTIFY_CLEAR_BYTE were requested: first we send an event channel
notification and then clear the notification byte which renders in the below
inconsistency (cli_live is the byte which was requested to be cleared on unmap):
[ 444.514243] gntdev_put_map UNMAP_NOTIFY_SEND_EVENT map->notify.event 6
libxenvchan_is_open cli_live 1
[ 444.515239] __unmap_grant_pages UNMAP_NOTIFY_CLEAR_BYTE at 14
Thus it is not possible to reliably implement the checks like
- wait for the notification (UNMAP_NOTIFY_SEND_EVENT)
- check the variable (UNMAP_NOTIFY_CLEAR_BYTE)
because it is possible that the variable gets checked before it is cleared
by the kernel.
To fix that we need to re-order the notifications, so the variable is first
gets cleared and then the event channel notification is sent.
With this fix I can see the correct order of execution:
[ 54.522611] __unmap_grant_pages UNMAP_NOTIFY_CLEAR_BYTE at 14
[ 54.537966] gntdev_put_map UNMAP_NOTIFY_SEND_EVENT map->notify.event 6
libxenvchan_is_open cli_live 0
Cc: [email protected]
Signed-off-by: Oleksandr Andrushchenko <[email protected]>
Reviewed-by: Boris Ostrovsky <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Juergen Gross <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/xen/gntdev.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/xen/gntdev.c
+++ b/drivers/xen/gntdev.c
@@ -240,13 +240,13 @@ void gntdev_put_map(struct gntdev_priv *
if (!refcount_dec_and_test(&map->users))
return;
+ if (map->pages && !use_ptemod)
+ unmap_grant_pages(map, 0, map->count);
+
if (map->notify.flags & UNMAP_NOTIFY_SEND_EVENT) {
notify_remote_via_evtchn(map->notify.event);
evtchn_put(map->notify.event);
}
-
- if (map->pages && !use_ptemod)
- unmap_grant_pages(map, 0, map->count);
gntdev_free_map(map);
}
From: Lakshmi Sowjanya D <[email protected]>
[ Upstream commit d52097010078c1844348dc0e467305e5f90fd317 ]
The data type of hcnt and lcnt in the struct dw_i2c_dev is of type u16.
It's better to have same data type in struct dw_scl_sda_cfg as well.
Reported-by: Wolfram Sang <[email protected]>
Signed-off-by: Lakshmi Sowjanya D <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
Signed-off-by: Jarkko Nikula <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/i2c/busses/i2c-designware-pcidrv.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c
index 55c83a7a24f36..56c87ade0e89d 100644
--- a/drivers/i2c/busses/i2c-designware-pcidrv.c
+++ b/drivers/i2c/busses/i2c-designware-pcidrv.c
@@ -37,10 +37,10 @@ enum dw_pci_ctl_id_t {
};
struct dw_scl_sda_cfg {
- u32 ss_hcnt;
- u32 fs_hcnt;
- u32 ss_lcnt;
- u32 fs_lcnt;
+ u16 ss_hcnt;
+ u16 fs_hcnt;
+ u16 ss_lcnt;
+ u16 fs_lcnt;
u32 sda_hold;
};
--
2.34.1
From: Maxime Ripard <[email protected]>
commit 20b0dfa86bef0e80b41b0e5ac38b92f23b6f27f9 upstream.
Similarly to what we encountered with the detect hook with DRM, nothing
actually prevents any of the CEC callback from being run while the HDMI
output is disabled.
However, this is an issue since any register access to the controller
when it's powered down will result in a silent hang.
Let's make sure we run the runtime_pm hooks when the CEC adapter is
opened and closed by the userspace to avoid that issue.
Fixes: 15b4511a4af6 ("drm/vc4: add HDMI CEC support")
Reviewed-by: Dave Stevenson <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/vc4/vc4_hdmi.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -1399,8 +1399,14 @@ static int vc4_hdmi_cec_adap_enable(stru
struct vc4_hdmi *vc4_hdmi = cec_get_drvdata(adap);
/* clock period in microseconds */
const u32 usecs = 1000000 / CEC_CLOCK_FREQ;
- u32 val = HDMI_READ(HDMI_CEC_CNTRL_5);
+ u32 val;
+ int ret;
+
+ ret = pm_runtime_resume_and_get(&vc4_hdmi->pdev->dev);
+ if (ret)
+ return ret;
+ val = HDMI_READ(HDMI_CEC_CNTRL_5);
val &= ~(VC4_HDMI_CEC_TX_SW_RESET | VC4_HDMI_CEC_RX_SW_RESET |
VC4_HDMI_CEC_CNT_TO_4700_US_MASK |
VC4_HDMI_CEC_CNT_TO_4500_US_MASK);
@@ -1525,6 +1531,8 @@ static int vc4_hdmi_cec_init(struct vc4_
if (ret < 0)
goto err_delete_cec_adap;
+ pm_runtime_put(&vc4_hdmi->pdev->dev);
+
return 0;
err_delete_cec_adap:
From: Pali Rohár <[email protected]>
commit 1c1a3b4d3e86b997a313ffb297c1129540882859 upstream.
If expansion ROM is unsupported (which is the case of pci-bridge-emul.c
driver) then ROM Base Address register must be implemented as read-only
register that return 0 when read, same as for unused Base Address
registers.
Link: https://lore.kernel.org/r/[email protected]
Fixes: 23a5fba4d941 ("PCI: Introduce PCI bridge emulated config space common logic")
Signed-off-by: Pali Rohár <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/pci-bridge-emul.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
--- a/drivers/pci/pci-bridge-emul.c
+++ b/drivers/pci/pci-bridge-emul.c
@@ -139,8 +139,13 @@ struct pci_bridge_reg_behavior pci_regs_
.ro = GENMASK(7, 0),
},
+ /*
+ * If expansion ROM is unsupported then ROM Base Address register must
+ * be implemented as read-only register that return 0 when read, same
+ * as for unused Base Address registers.
+ */
[PCI_ROM_ADDRESS1 / 4] = {
- .rw = GENMASK(31, 11) | BIT(0),
+ .ro = ~0,
},
/*
From: Lukas Wunner <[email protected]>
commit 23584c1ed3e15a6f4bfab8dc5a88d94ab929ee12 upstream.
The Power Fault Detected bit in the Slot Status register differs from
all other hotplug events in that it is sticky: It can only be cleared
after turning off slot power. Per PCIe r5.0, sec. 6.7.1.8:
If a power controller detects a main power fault on the hot-plug slot,
it must automatically set its internal main power fault latch [...].
The main power fault latch is cleared when software turns off power to
the hot-plug slot.
The stickiness used to cause interrupt storms and infinite loops which
were fixed in 2009 by commits 5651c48cfafe ("PCI pciehp: fix power fault
interrupt storm problem") and 99f0169c17f3 ("PCI: pciehp: enable
software notification on empty slots").
Unfortunately in 2020 the infinite loop issue was inadvertently
reintroduced by commit 8edf5332c393 ("PCI: pciehp: Fix MSI interrupt
race"): The hardirq handler pciehp_isr() clears the PFD bit until
pciehp's power_fault_detected flag is set. That happens in the IRQ
thread pciehp_ist(), which never learns of the event because the hardirq
handler is stuck in an infinite loop. Fix by setting the
power_fault_detected flag already in the hardirq handler.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=214989
Link: https://lore.kernel.org/linux-pci/DM8PR11MB5702255A6A92F735D90A4446868B9@DM8PR11MB5702.namprd11.prod.outlook.com
Fixes: 8edf5332c393 ("PCI: pciehp: Fix MSI interrupt race")
Link: https://lore.kernel.org/r/66eaeef31d4997ceea357ad93259f290ededecfd.1637187226.git.lukas@wunner.de
Reported-by: Joseph Bao <[email protected]>
Tested-by: Joseph Bao <[email protected]>
Signed-off-by: Lukas Wunner <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Cc: [email protected] # v4.19+
Cc: Stuart Hayes <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/hotplug/pciehp_hpc.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -642,6 +642,8 @@ read_status:
*/
if (ctrl->power_fault_detected)
status &= ~PCI_EXP_SLTSTA_PFD;
+ else if (status & PCI_EXP_SLTSTA_PFD)
+ ctrl->power_fault_detected = true;
events |= status;
if (!events) {
@@ -651,7 +653,7 @@ read_status:
}
if (status) {
- pcie_capability_write_word(pdev, PCI_EXP_SLTSTA, events);
+ pcie_capability_write_word(pdev, PCI_EXP_SLTSTA, status);
/*
* In MSI mode, all event bits must be zero before the port
@@ -725,8 +727,7 @@ static irqreturn_t pciehp_ist(int irq, v
}
/* Check Power Fault Detected */
- if ((events & PCI_EXP_SLTSTA_PFD) && !ctrl->power_fault_detected) {
- ctrl->power_fault_detected = 1;
+ if (events & PCI_EXP_SLTSTA_PFD) {
ctrl_err(ctrl, "Slot(%s): Power fault\n", slot_name(ctrl));
pciehp_set_indicators(ctrl, PCI_EXP_SLTCTL_PWR_IND_OFF,
PCI_EXP_SLTCTL_ATTN_IND_ON);
From: Takashi Iwai <[email protected]>
[ Upstream commit 6fadb494a638d8b8a55864ecc6ac58194f03f327 ]
Currently ALSA sequencer core tries to process the queued events as
much as possible when they become dispatchable. If applications try
to queue too massive events to be processed at the very same timing,
the sequencer core would still try to process such all events, either
in the interrupt context or via some notifier; in either away, it
might be a cause of RCU stall or such problems.
As a potential workaround for those problems, this patch adds the
upper limit of the amount of events to be processed. The remaining
events are processed in the next batch, so they won't be lost.
For the time being, it's limited up to 1000 events per queue, which
should be high enough for any normal usages.
Reported-by: Zqiang <[email protected]>
Reported-by: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/core/seq/seq_queue.c | 14 ++++++++++++--
1 file changed, 12 insertions(+), 2 deletions(-)
diff --git a/sound/core/seq/seq_queue.c b/sound/core/seq/seq_queue.c
index 71a6ea62c3be7..4ff0b927230c2 100644
--- a/sound/core/seq/seq_queue.c
+++ b/sound/core/seq/seq_queue.c
@@ -234,12 +234,15 @@ struct snd_seq_queue *snd_seq_queue_find_name(char *name)
/* -------------------------------------------------------- */
+#define MAX_CELL_PROCESSES_IN_QUEUE 1000
+
void snd_seq_check_queue(struct snd_seq_queue *q, int atomic, int hop)
{
unsigned long flags;
struct snd_seq_event_cell *cell;
snd_seq_tick_time_t cur_tick;
snd_seq_real_time_t cur_time;
+ int processed = 0;
if (q == NULL)
return;
@@ -262,6 +265,8 @@ void snd_seq_check_queue(struct snd_seq_queue *q, int atomic, int hop)
if (!cell)
break;
snd_seq_dispatch_event(cell, atomic, hop);
+ if (++processed >= MAX_CELL_PROCESSES_IN_QUEUE)
+ goto out; /* the rest processed at the next batch */
}
/* Process time queue... */
@@ -271,14 +276,19 @@ void snd_seq_check_queue(struct snd_seq_queue *q, int atomic, int hop)
if (!cell)
break;
snd_seq_dispatch_event(cell, atomic, hop);
+ if (++processed >= MAX_CELL_PROCESSES_IN_QUEUE)
+ goto out; /* the rest processed at the next batch */
}
+ out:
/* free lock */
spin_lock_irqsave(&q->check_lock, flags);
if (q->check_again) {
q->check_again = 0;
- spin_unlock_irqrestore(&q->check_lock, flags);
- goto __again;
+ if (processed < MAX_CELL_PROCESSES_IN_QUEUE) {
+ spin_unlock_irqrestore(&q->check_lock, flags);
+ goto __again;
+ }
}
q->check_blocked = 0;
spin_unlock_irqrestore(&q->check_lock, flags);
--
2.34.1
From: Ben Hutchings <[email protected]>
commit d185a3466f0cd5af8f1c5c782c53bc0e6f2e7136 upstream.
The help text for GOOGLE_FIRMWARE states that it should only be
enabled when building a kernel for Google's own servers. However,
many of the drivers dependent on it are also useful on Chromebooks or
on any platform using coreboot.
Update the help text to reflect this double duty.
Fixes: d384d6f43d1e ("firmware: google memconsole: Add coreboot support")
Reviewed-by: Julius Werner <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/firmware/google/Kconfig | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/firmware/google/Kconfig
+++ b/drivers/firmware/google/Kconfig
@@ -3,9 +3,9 @@ menuconfig GOOGLE_FIRMWARE
bool "Google Firmware Drivers"
default n
help
- These firmware drivers are used by Google's servers. They are
- only useful if you are working directly on one of their
- proprietary servers. If in doubt, say "N".
+ These firmware drivers are used by Google servers,
+ Chromebooks and other devices using coreboot firmware.
+ If in doubt, say "N".
if GOOGLE_FIRMWARE
From: Marc Zyngier <[email protected]>
[ Upstream commit 79a7f77b9b154d572bd9d2f1eecf58c4d018d8e2 ]
Jay Chen reported that using a kdump kernel on a GICv4.1 system
results in a RAS error being delivered when the secondary kernel
configures the ITS's view of the new VPE table.
As it turns out, that's because each RD still has a pointer to
the previous instance of the VPE table, and that particular
implementation is very upset by seeing two bits of the HW that
should point to the same table with different values.
To solve this, let's invalidate any reference that any RD has to
the VPE table when discovering the RDs. The ITS can then be
programmed as expected.
Reported-by: Jay Chen <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Cc: Lorenzo Pieralisi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/irqchip/irq-gic-v3.c | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/drivers/irqchip/irq-gic-v3.c b/drivers/irqchip/irq-gic-v3.c
index 1bdb7acf445f4..04d1b3963b6ba 100644
--- a/drivers/irqchip/irq-gic-v3.c
+++ b/drivers/irqchip/irq-gic-v3.c
@@ -915,6 +915,22 @@ static int __gic_update_rdist_properties(struct redist_region *region,
{
u64 typer = gic_read_typer(ptr + GICR_TYPER);
+ /* Boot-time cleanip */
+ if ((typer & GICR_TYPER_VLPIS) && (typer & GICR_TYPER_RVPEID)) {
+ u64 val;
+
+ /* Deactivate any present vPE */
+ val = gicr_read_vpendbaser(ptr + SZ_128K + GICR_VPENDBASER);
+ if (val & GICR_VPENDBASER_Valid)
+ gicr_write_vpendbaser(GICR_VPENDBASER_PendingLast,
+ ptr + SZ_128K + GICR_VPENDBASER);
+
+ /* Mark the VPE table as invalid */
+ val = gicr_read_vpropbaser(ptr + SZ_128K + GICR_VPROPBASER);
+ val &= ~GICR_VPROPBASER_4_1_VALID;
+ gicr_write_vpropbaser(val, ptr + SZ_128K + GICR_VPROPBASER);
+ }
+
gic_data.rdists.has_vlpis &= !!(typer & GICR_TYPER_VLPIS);
/* RVPEID implies some form of DirectLPI, no matter what the doc says... :-/ */
--
2.34.1
From: Rob Herring <[email protected]>
commit c7a75d07827a1f33d566e18e6098379cc2a0c2b2 upstream.
Commit 6dce5aa59e0b ("PCI: xgene: Use inbound resources for setup")
broke PCI support on XGene. The cause is the IB resources are now sorted
in address order instead of being in DT dma-ranges order. The result is
which inbound registers are used for each region are swapped. I don't
know the details about this h/w, but it appears that IB region 0
registers can't handle a size greater than 4GB. In any case, limiting
the size for region 0 is enough to get back to the original assignment
of dma-ranges to regions.
Link: https://lore.kernel.org/all/CA+enf=v9rY_xnZML01oEgKLmvY1NGBUUhnSJaETmXtDtXfaczA@mail.gmail.com/
Link: https://lore.kernel.org/r/[email protected]
Fixes: 6dce5aa59e0b ("PCI: xgene: Use inbound resources for setup")
Reported-by: Stéphane Graber <[email protected]>
Tested-by: Stéphane Graber <[email protected]>
Signed-off-by: Rob Herring <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Reviewed-by: Krzysztof Wilczyński <[email protected]>
Cc: [email protected] # v5.5+
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/controller/pci-xgene.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/pci/controller/pci-xgene.c
+++ b/drivers/pci/controller/pci-xgene.c
@@ -467,7 +467,7 @@ static int xgene_pcie_select_ib_reg(u8 *
return 1;
}
- if ((size > SZ_1K) && (size < SZ_1T) && !(*ib_reg_mask & (1 << 0))) {
+ if ((size > SZ_1K) && (size < SZ_4G) && !(*ib_reg_mask & (1 << 0))) {
*ib_reg_mask |= (1 << 0);
return 0;
}
From: Miaoqian Lin <[email protected]>
commit d24846a4246b6e61ecbd036880a4adf61681d241 upstream.
kobject_init_and_add() takes reference even when it fails.
According to the doc of kobject_init_and_add()：
If this function returns an error, kobject_put() must be called to
properly clean up the memory associated with the object.
Fix memory leak by calling kobject_put().
Fixes: 73f368cf679b ("Kobject: change drivers/parisc/pdc_stable.c to use kobject_init_and_add")
Signed-off-by: Miaoqian Lin <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/parisc/pdc_stable.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/parisc/pdc_stable.c
+++ b/drivers/parisc/pdc_stable.c
@@ -979,8 +979,10 @@ pdcs_register_pathentries(void)
entry->kobj.kset = paths_kset;
err = kobject_init_and_add(&entry->kobj, &ktype_pdcspath, NULL,
"%s", entry->name);
- if (err)
+ if (err) {
+ kobject_put(&entry->kobj);
return err;
+ }
/* kobject is now registered */
write_lock(&entry->rw_lock);
From: Eric Dumazet <[email protected]>
commit 9d6d7f1cb67cdee15f1a0e85aacfb924e0e02435 upstream.
wait_for_unix_gc() reads unix_tot_inflight & gc_in_progress
without synchronization.
Adds READ_ONCE()/WRITE_ONCE() and their associated comments
to better document the intent.
BUG: KCSAN: data-race in unix_inflight / wait_for_unix_gc
write to 0xffffffff86e2b7c0 of 4 bytes by task 9380 on cpu 0:
unix_inflight+0x1e8/0x260 net/unix/scm.c:63
unix_attach_fds+0x10c/0x1e0 net/unix/scm.c:121
unix_scm_to_skb net/unix/af_unix.c:1674 [inline]
unix_dgram_sendmsg+0x679/0x16b0 net/unix/af_unix.c:1817
unix_seqpacket_sendmsg+0xcc/0x110 net/unix/af_unix.c:2258
sock_sendmsg_nosec net/socket.c:704 [inline]
sock_sendmsg net/socket.c:724 [inline]
____sys_sendmsg+0x39a/0x510 net/socket.c:2409
___sys_sendmsg net/socket.c:2463 [inline]
__sys_sendmmsg+0x267/0x4c0 net/socket.c:2549
__do_sys_sendmmsg net/socket.c:2578 [inline]
__se_sys_sendmmsg net/socket.c:2575 [inline]
__x64_sys_sendmmsg+0x53/0x60 net/socket.c:2575
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
read to 0xffffffff86e2b7c0 of 4 bytes by task 9375 on cpu 1:
wait_for_unix_gc+0x24/0x160 net/unix/garbage.c:196
unix_dgram_sendmsg+0x8e/0x16b0 net/unix/af_unix.c:1772
unix_seqpacket_sendmsg+0xcc/0x110 net/unix/af_unix.c:2258
sock_sendmsg_nosec net/socket.c:704 [inline]
sock_sendmsg net/socket.c:724 [inline]
____sys_sendmsg+0x39a/0x510 net/socket.c:2409
___sys_sendmsg net/socket.c:2463 [inline]
__sys_sendmmsg+0x267/0x4c0 net/socket.c:2549
__do_sys_sendmmsg net/socket.c:2578 [inline]
__se_sys_sendmmsg net/socket.c:2575 [inline]
__x64_sys_sendmmsg+0x53/0x60 net/socket.c:2575
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
value changed: 0x00000002 -> 0x00000004
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 9375 Comm: syz-executor.1 Not tainted 5.16.0-rc7-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Fixes: 9915672d4127 ("af_unix: limit unix_tot_inflight")
Signed-off-by: Eric Dumazet <[email protected]>
Reported-by: syzbot <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/unix/garbage.c | 14 +++++++++++---
net/unix/scm.c | 6 ++++--
2 files changed, 15 insertions(+), 5 deletions(-)
--- a/net/unix/garbage.c
+++ b/net/unix/garbage.c
@@ -192,8 +192,11 @@ void wait_for_unix_gc(void)
{
/* If number of inflight sockets is insane,
* force a garbage collect right now.
+ * Paired with the WRITE_ONCE() in unix_inflight(),
+ * unix_notinflight() and gc_in_progress().
*/
- if (unix_tot_inflight > UNIX_INFLIGHT_TRIGGER_GC && !gc_in_progress)
+ if (READ_ONCE(unix_tot_inflight) > UNIX_INFLIGHT_TRIGGER_GC &&
+ !READ_ONCE(gc_in_progress))
unix_gc();
wait_event(unix_gc_wait, gc_in_progress == false);
}
@@ -213,7 +216,9 @@ void unix_gc(void)
if (gc_in_progress)
goto out;
- gc_in_progress = true;
+ /* Paired with READ_ONCE() in wait_for_unix_gc(). */
+ WRITE_ONCE(gc_in_progress, true);
+
/* First, select candidates for garbage collection. Only
* in-flight sockets are considered, and from those only ones
* which don't have any external reference.
@@ -299,7 +304,10 @@ void unix_gc(void)
/* All candidates should have been detached by now. */
BUG_ON(!list_empty(&gc_candidates));
- gc_in_progress = false;
+
+ /* Paired with READ_ONCE() in wait_for_unix_gc(). */
+ WRITE_ONCE(gc_in_progress, false);
+
wake_up(&unix_gc_wait);
out:
--- a/net/unix/scm.c
+++ b/net/unix/scm.c
@@ -60,7 +60,8 @@ void unix_inflight(struct user_struct *u
} else {
BUG_ON(list_empty(&u->link));
}
- unix_tot_inflight++;
+ /* Paired with READ_ONCE() in wait_for_unix_gc() */
+ WRITE_ONCE(unix_tot_inflight, unix_tot_inflight + 1);
}
user->unix_inflight++;
spin_unlock(&unix_gc_lock);
@@ -80,7 +81,8 @@ void unix_notinflight(struct user_struct
if (atomic_long_dec_and_test(&u->inflight))
list_del_init(&u->link);
- unix_tot_inflight--;
+ /* Paired with READ_ONCE() in wait_for_unix_gc() */
+ WRITE_ONCE(unix_tot_inflight, unix_tot_inflight - 1);
}
user->unix_inflight--;
spin_unlock(&unix_gc_lock);
From: Wen Gu <[email protected]>
commit 56d99e81ecbc997a5f984684d0eeb583992b2072 upstream.
A hung_task is observed when removing SMC-R devices. Suppose that
a link group has two active links(lnk_A, lnk_B) associated with two
different SMC-R devices(dev_A, dev_B). When dev_A is removed, the
link group will be removed from smc_lgr_list and added into
lgr_linkdown_list. lnk_A will be cleared and smcibdev(A)->lnk_cnt
will reach to zero. However, when dev_B is removed then, the link
group can't be found in smc_lgr_list and lnk_B won't be cleared,
making smcibdev->lnk_cnt never reaches zero, which causes a hung_task.
This patch fixes this issue by restoring the implementation of
smc_smcr_terminate_all() to what it was before commit 349d43127dac
("net/smc: fix kernel panic caused by race of smc_sock"). The original
implementation also satisfies the intention that make sure QP destroy
earlier than CQ destroy because we will always wait for smcibdev->lnk_cnt
reaches zero, which guarantees QP has been destroyed.
Fixes: 349d43127dac ("net/smc: fix kernel panic caused by race of smc_sock")
Signed-off-by: Wen Gu <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/smc/smc_core.c | 17 +----------------
1 file changed, 1 insertion(+), 16 deletions(-)
--- a/net/smc/smc_core.c
+++ b/net/smc/smc_core.c
@@ -1002,16 +1002,11 @@ void smc_smcd_terminate_all(struct smcd_
/* Called when an SMCR device is removed or the smc module is unloaded.
* If smcibdev is given, all SMCR link groups using this device are terminated.
* If smcibdev is NULL, all SMCR link groups are terminated.
- *
- * We must wait here for QPs been destroyed before we destroy the CQs,
- * or we won't received any CQEs and cdc_pend_tx_wr cannot reach 0 thus
- * smc_sock cannot be released.
*/
void smc_smcr_terminate_all(struct smc_ib_device *smcibdev)
{
struct smc_link_group *lgr, *lg;
LIST_HEAD(lgr_free_list);
- LIST_HEAD(lgr_linkdown_list);
int i;
spin_lock_bh(&smc_lgr_list.lock);
@@ -1023,7 +1018,7 @@ void smc_smcr_terminate_all(struct smc_i
list_for_each_entry_safe(lgr, lg, &smc_lgr_list.list, list) {
for (i = 0; i < SMC_LINKS_PER_LGR_MAX; i++) {
if (lgr->lnk[i].smcibdev == smcibdev)
- list_move_tail(&lgr->list, &lgr_linkdown_list);
+ smcr_link_down_cond_sched(&lgr->lnk[i]);
}
}
}
@@ -1035,16 +1030,6 @@ void smc_smcr_terminate_all(struct smc_i
__smc_lgr_terminate(lgr, false);
}
- list_for_each_entry_safe(lgr, lg, &lgr_linkdown_list, list) {
- for (i = 0; i < SMC_LINKS_PER_LGR_MAX; i++) {
- if (lgr->lnk[i].smcibdev == smcibdev) {
- mutex_lock(&lgr->llc_conf_mutex);
- smcr_link_down_cond(&lgr->lnk[i]);
- mutex_unlock(&lgr->llc_conf_mutex);
- }
- }
- }
-
if (smcibdev) {
if (atomic_read(&smcibdev->lnk_cnt))
wait_event(smcibdev->lnks_deleted,
From: Xin Yin <[email protected]>
commit 9725958bb75cdfa10f2ec11526fdb23e7485e8e4 upstream.
If use FALLOC_FL_KEEP_SIZE to alloc unwritten range at bottom, the
inode->i_size will not include the unwritten range. When call
ftruncate with fast commit enabled, it will miss to track the
unwritten range.
Change to trace the full range during ftruncate.
Signed-off-by: Xin Yin <[email protected]>
Reviewed-by: Harshad Shirwadkar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/inode.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -5468,8 +5468,7 @@ int ext4_setattr(struct dentry *dentry,
ext4_fc_track_range(handle, inode,
(attr->ia_size > 0 ? attr->ia_size - 1 : 0) >>
inode->i_sb->s_blocksize_bits,
- (oldsize > 0 ? oldsize - 1 : 0) >>
- inode->i_sb->s_blocksize_bits);
+ EXT_MAX_BLOCKS - 1);
else
ext4_fc_track_range(
handle, inode,
From: Ye Guojin <[email protected]>
[ Upstream commit 858779df1c0787d3fec827fb705708df9ebdb15b ]
This was found by coccicheck:
./arch/mips/cavium-octeon/octeon-platform.c, 332, 1-7, ERROR missing
put_device; call of_find_device_by_node on line 324, but without a
corresponding object release within this function.
./arch/mips/cavium-octeon/octeon-platform.c, 395, 1-7, ERROR missing
put_device; call of_find_device_by_node on line 387, but without a
corresponding object release within this function.
./arch/mips/cavium-octeon/octeon-usb.c, 512, 3-9, ERROR missing
put_device; call of_find_device_by_node on line 515, but without a
corresponding object release within this function.
./arch/mips/cavium-octeon/octeon-usb.c, 543, 1-7, ERROR missing
put_device; call of_find_device_by_node on line 515, but without a
corresponding object release within this function.
Reported-by: Zeal Robot <[email protected]>
Signed-off-by: Ye Guojin <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/mips/cavium-octeon/octeon-platform.c | 2 ++
arch/mips/cavium-octeon/octeon-usb.c | 1 +
2 files changed, 3 insertions(+)
diff --git a/arch/mips/cavium-octeon/octeon-platform.c b/arch/mips/cavium-octeon/octeon-platform.c
index d56e9b9d2e434..a994022e32c9f 100644
--- a/arch/mips/cavium-octeon/octeon-platform.c
+++ b/arch/mips/cavium-octeon/octeon-platform.c
@@ -328,6 +328,7 @@ static int __init octeon_ehci_device_init(void)
pd->dev.platform_data = &octeon_ehci_pdata;
octeon_ehci_hw_start(&pd->dev);
+ put_device(&pd->dev);
return ret;
}
@@ -391,6 +392,7 @@ static int __init octeon_ohci_device_init(void)
pd->dev.platform_data = &octeon_ohci_pdata;
octeon_ohci_hw_start(&pd->dev);
+ put_device(&pd->dev);
return ret;
}
diff --git a/arch/mips/cavium-octeon/octeon-usb.c b/arch/mips/cavium-octeon/octeon-usb.c
index 950e6c6e86297..fa87e5aa1811d 100644
--- a/arch/mips/cavium-octeon/octeon-usb.c
+++ b/arch/mips/cavium-octeon/octeon-usb.c
@@ -544,6 +544,7 @@ static int __init dwc3_octeon_device_init(void)
devm_iounmap(&pdev->dev, base);
devm_release_mem_region(&pdev->dev, res->start,
resource_size(res));
+ put_device(&pdev->dev);
}
} while (node != NULL);
--
2.34.1
From: Eric Dumazet <[email protected]>
commit d07418afea8f1d9896aaf9dc5ae47ac4f45b220c upstream.
net/ipv4/fib_semantics.c uses an hash table of 256 slots,
keyed by device ifindexes: fib_info_devhash[DEVINDEX_HASHSIZE]
Problem is that with network namespaces, devices tend
to use the same ifindex.
lo device for instance has a fixed ifindex of one,
for all network namespaces.
This means that hosts with thousands of netns spend
a lot of time looking at some hash buckets with thousands
of elements, notably at netns dismantle.
Simply add a per netns perturbation (net_hash_mix())
to spread elements more uniformely.
Also change fib_devindex_hashfn() to use more entropy.
Fixes: aa79e66eee5d ("net: Make ifindex generation per-net namespace")
Signed-off-by: Eric Dumazet <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv4/fib_semantics.c | 36 +++++++++++++++++-------------------
1 file changed, 17 insertions(+), 19 deletions(-)
--- a/net/ipv4/fib_semantics.c
+++ b/net/ipv4/fib_semantics.c
@@ -29,6 +29,7 @@
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/netlink.h>
+#include <linux/hash.h>
#include <net/arp.h>
#include <net/ip.h>
@@ -321,11 +322,15 @@ static inline int nh_comp(struct fib_inf
static inline unsigned int fib_devindex_hashfn(unsigned int val)
{
- unsigned int mask = DEVINDEX_HASHSIZE - 1;
+ return hash_32(val, DEVINDEX_HASHBITS);
+}
+
+static struct hlist_head *
+fib_info_devhash_bucket(const struct net_device *dev)
+{
+ u32 val = net_hash_mix(dev_net(dev)) ^ dev->ifindex;
- return (val ^
- (val >> DEVINDEX_HASHBITS) ^
- (val >> (DEVINDEX_HASHBITS * 2))) & mask;
+ return &fib_info_devhash[fib_devindex_hashfn(val)];
}
static unsigned int fib_info_hashfn_1(int init_val, u8 protocol, u8 scope,
@@ -435,12 +440,11 @@ int ip_fib_check_default(__be32 gw, stru
{
struct hlist_head *head;
struct fib_nh *nh;
- unsigned int hash;
spin_lock(&fib_info_lock);
- hash = fib_devindex_hashfn(dev->ifindex);
- head = &fib_info_devhash[hash];
+ head = fib_info_devhash_bucket(dev);
+
hlist_for_each_entry(nh, head, nh_hash) {
if (nh->fib_nh_dev == dev &&
nh->fib_nh_gw4 == gw &&
@@ -1608,12 +1612,10 @@ link_it:
} else {
change_nexthops(fi) {
struct hlist_head *head;
- unsigned int hash;
if (!nexthop_nh->fib_nh_dev)
continue;
- hash = fib_devindex_hashfn(nexthop_nh->fib_nh_dev->ifindex);
- head = &fib_info_devhash[hash];
+ head = fib_info_devhash_bucket(nexthop_nh->fib_nh_dev);
hlist_add_head(&nexthop_nh->nh_hash, head);
} endfor_nexthops(fi)
}
@@ -1963,8 +1965,7 @@ void fib_nhc_update_mtu(struct fib_nh_co
void fib_sync_mtu(struct net_device *dev, u32 orig_mtu)
{
- unsigned int hash = fib_devindex_hashfn(dev->ifindex);
- struct hlist_head *head = &fib_info_devhash[hash];
+ struct hlist_head *head = fib_info_devhash_bucket(dev);
struct fib_nh *nh;
hlist_for_each_entry(nh, head, nh_hash) {
@@ -1983,12 +1984,11 @@ void fib_sync_mtu(struct net_device *dev
*/
int fib_sync_down_dev(struct net_device *dev, unsigned long event, bool force)
{
- int ret = 0;
- int scope = RT_SCOPE_NOWHERE;
+ struct hlist_head *head = fib_info_devhash_bucket(dev);
struct fib_info *prev_fi = NULL;
- unsigned int hash = fib_devindex_hashfn(dev->ifindex);
- struct hlist_head *head = &fib_info_devhash[hash];
+ int scope = RT_SCOPE_NOWHERE;
struct fib_nh *nh;
+ int ret = 0;
if (force)
scope = -1;
@@ -2133,7 +2133,6 @@ out:
int fib_sync_up(struct net_device *dev, unsigned char nh_flags)
{
struct fib_info *prev_fi;
- unsigned int hash;
struct hlist_head *head;
struct fib_nh *nh;
int ret;
@@ -2149,8 +2148,7 @@ int fib_sync_up(struct net_device *dev,
}
prev_fi = NULL;
- hash = fib_devindex_hashfn(dev->ifindex);
- head = &fib_info_devhash[hash];
+ head = fib_info_devhash_bucket(dev);
ret = 0;
hlist_for_each_entry(nh, head, nh_hash) {
From: Sakari Ailus <[email protected]>
commit 4a7f4110f79163fd53ea65438041994ed615e3af upstream.
For each endpoint it encounters, fwnode_graph_devcon_match() checks
whether the endpoint's remote port parent device is available. If it is
not, it ignores the endpoint but does not put the reference to the remote
endpoint port parent fwnode. For available devices the fwnode handle
reference is put as expected.
Put the reference for unavailable devices now.
Fixes: 637e9e52b185 ("device connection: Find device connections also from device graphs")
Cc: 5.1+ <[email protected]> # 5.1+
Signed-off-by: Sakari Ailus <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/base/property.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/base/property.c
+++ b/drivers/base/property.c
@@ -1195,8 +1195,10 @@ fwnode_graph_devcon_match(struct fwnode_
fwnode_graph_for_each_endpoint(fwnode, ep) {
node = fwnode_graph_get_remote_port_parent(ep);
- if (!fwnode_device_is_available(node))
+ if (!fwnode_device_is_available(node)) {
+ fwnode_handle_put(node);
continue;
+ }
ret = match(node, con_id, data);
fwnode_handle_put(node);
From: Jan Kara <[email protected]>
commit 4013d47a5307fdb5c13370b5392498b00fedd274 upstream.
When we succeed in enabling some quota type but fail to enable another
one with quota feature, we correctly disable all enabled quota types.
However we forget to reset i_data_sem lockdep class. When the inode gets
freed and reused, it will inherit this lockdep class (i_data_sem is
initialized only when a slab is created) and thus eventually lockdep
barfs about possible deadlocks.
Reported-and-tested-by: [email protected]
Signed-off-by: Jan Kara <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/super.c | 13 ++++++++++++-
1 file changed, 12 insertions(+), 1 deletion(-)
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -6427,8 +6427,19 @@ static int ext4_enable_quotas(struct sup
"Failed to enable quota tracking "
"(type=%d, err=%d). Please run "
"e2fsck to fix.", type, err);
- for (type--; type >= 0; type--)
+ for (type--; type >= 0; type--) {
+ struct inode *inode;
+
+ inode = sb_dqopt(sb)->files[type];
+ if (inode)
+ inode = igrab(inode);
dquot_quota_off(sb, type);
+ if (inode) {
+ lockdep_set_quota_inode(inode,
+ I_DATA_SEM_NORMAL);
+ iput(inode);
+ }
+ }
return err;
}
From: Robert Hancock <[email protected]>
commit 2e5644b1bab2ccea9cfc7a9520af95b94eb0dbf1 upstream.
The previous timeout of 1ms was too short to handle some cases where the
core is reset just after the input clocks were started, which will
be introduced in an upcoming patch. Increase the timeout to 50ms. Also
simplify the reset timeout checking to use read_poll_timeout.
Fixes: 8a3b7a252dca9 ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Robert Hancock <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 19 +++++++++----------
1 file changed, 9 insertions(+), 10 deletions(-)
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -496,7 +496,8 @@ static void axienet_setoptions(struct ne
static int __axienet_device_reset(struct axienet_local *lp)
{
- u32 timeout;
+ u32 value;
+ int ret;
/* Reset Axi DMA. This would reset Axi Ethernet core as well. The reset
* process of Axi DMA takes a while to complete as all pending
@@ -506,15 +507,13 @@ static int __axienet_device_reset(struct
* they both reset the entire DMA core, so only one needs to be used.
*/
axienet_dma_out32(lp, XAXIDMA_TX_CR_OFFSET, XAXIDMA_CR_RESET_MASK);
- timeout = DELAY_OF_ONE_MILLISEC;
- while (axienet_dma_in32(lp, XAXIDMA_TX_CR_OFFSET) &
- XAXIDMA_CR_RESET_MASK) {
- udelay(1);
- if (--timeout == 0) {
- netdev_err(lp->ndev, "%s: DMA reset timeout!\n",
- __func__);
- return -ETIMEDOUT;
- }
+ ret = read_poll_timeout(axienet_dma_in32, value,
+ !(value & XAXIDMA_CR_RESET_MASK),
+ DELAY_OF_ONE_MILLISEC, 50000, false, lp,
+ XAXIDMA_TX_CR_OFFSET);
+ if (ret) {
+ dev_err(lp->dev, "%s: DMA reset timeout!\n", __func__);
+ return ret;
}
return 0;
From: Sebastian Andrzej Siewior <[email protected]>
commit ab047d516dea72f011c15c04a929851e4d053109 upstream.
The kmemcache for ext4_fc_dentry_cachep remains registered after module
removal.
Destroy ext4_fc_dentry_cachep kmemcache on module removal.
Fixes: aa75f4d3daaeb ("ext4: main fast-commit commit path")
Signed-off-by: Sebastian Andrzej Siewior <[email protected]>
Reviewed-by: Lukas Czerner <[email protected]>
Reviewed-by: Harshad Shirwadkar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/ext4.h | 1 +
fs/ext4/fast_commit.c | 5 +++++
fs/ext4/super.c | 2 ++
3 files changed, 8 insertions(+)
--- a/fs/ext4/ext4.h
+++ b/fs/ext4/ext4.h
@@ -2778,6 +2778,7 @@ bool ext4_fc_replay_check_excluded(struc
void ext4_fc_replay_cleanup(struct super_block *sb);
int ext4_fc_commit(journal_t *journal, tid_t commit_tid);
int __init ext4_fc_init_dentry_cache(void);
+void ext4_fc_destroy_dentry_cache(void);
/* mballoc.c */
extern const struct seq_operations ext4_mb_seq_groups_ops;
--- a/fs/ext4/fast_commit.c
+++ b/fs/ext4/fast_commit.c
@@ -2169,3 +2169,8 @@ int __init ext4_fc_init_dentry_cache(voi
return 0;
}
+
+void ext4_fc_destroy_dentry_cache(void)
+{
+ kmem_cache_destroy(ext4_fc_dentry_cachep);
+}
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -6729,6 +6729,7 @@ static int __init ext4_init_fs(void)
out:
unregister_as_ext2();
unregister_as_ext3();
+ ext4_fc_destroy_dentry_cache();
out05:
destroy_inodecache();
out1:
@@ -6755,6 +6756,7 @@ static void __exit ext4_exit_fs(void)
unregister_as_ext2();
unregister_as_ext3();
unregister_filesystem(&ext4_fs_type);
+ ext4_fc_destroy_dentry_cache();
destroy_inodecache();
ext4_exit_mballoc();
ext4_exit_sysfs();
From: Filipe Manana <[email protected]>
commit c2f822635df873c510bda6fb7fd1b10b7c31be2d upstream.
If we extended the size of a swapfile after its header was created (by the
mkswap utility) and then try to activate it, we will map the entire file
when activating the swap file, instead of limiting to the max size defined
in the swap file's header.
Currently test case generic/643 from fstests fails because we do not
respect that size limit defined in the swap file's header.
So fix this by not mapping file ranges beyond the max size defined in the
swap header.
This is the same type of bug that iomap used to have, and was fixed in
commit 36ca7943ac18ae ("mm/swap: consider max pages in
iomap_swapfile_add_extent").
Fixes: ed46ff3d423780 ("Btrfs: support swap files")
CC: [email protected] # 5.4+
Reviewed-and-tested-by: Josef Bacik <[email protected]
Signed-off-by: Filipe Manana <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/btrfs/inode.c | 11 +++++++++++
1 file changed, 11 insertions(+)
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -10094,9 +10094,19 @@ static int btrfs_add_swap_extent(struct
struct btrfs_swap_info *bsi)
{
unsigned long nr_pages;
+ unsigned long max_pages;
u64 first_ppage, first_ppage_reported, next_ppage;
int ret;
+ /*
+ * Our swapfile may have had its size extended after the swap header was
+ * written. In that case activating the swapfile should not go beyond
+ * the max size set in the swap header.
+ */
+ if (bsi->nr_pages >= sis->max)
+ return 0;
+
+ max_pages = sis->max - bsi->nr_pages;
first_ppage = ALIGN(bsi->block_start, PAGE_SIZE) >> PAGE_SHIFT;
next_ppage = ALIGN_DOWN(bsi->block_start + bsi->block_len,
PAGE_SIZE) >> PAGE_SHIFT;
@@ -10104,6 +10114,7 @@ static int btrfs_add_swap_extent(struct
if (first_ppage >= next_ppage)
return 0;
nr_pages = next_ppage - first_ppage;
+ nr_pages = min(nr_pages, max_pages);
first_ppage_reported = first_ppage;
if (bsi->start == 0)
From: Chao Yu <[email protected]>
commit 300a842937fbcfb5a189cea9ba15374fdb0b5c6b upstream.
https://bugzilla.kernel.org/show_bug.cgi?id=204137
With below script, we will hit panic during new segment allocation:
DISK=bingo.img
MOUNT_DIR=/mnt/f2fs
dd if=/dev/zero of=$DISK bs=1M count=105
mkfs.f2fe -a 1 -o 19 -t 1 -z 1 -f -q $DISK
mount -t f2fs $DISK $MOUNT_DIR -o "noinline_dentry,flush_merge,noextent_cache,mode=lfs,io_bits=7,fsync_mode=strict"
for (( i = 0; i < 4096; i++ )); do
name=`head /dev/urandom | tr -dc A-Za-z0-9 | head -c 10`
mkdir $MOUNT_DIR/$name
done
umount $MOUNT_DIR
rm $DISK
---
fs/f2fs/f2fs.h | 11 +++++++++++
fs/f2fs/segment.h | 3 ++-
fs/f2fs/super.c | 44 ++++++++++++++++++++++++++++++++++++++++++++
fs/f2fs/sysfs.c | 4 +++-
4 files changed, 60 insertions(+), 2 deletions(-)
--- a/fs/f2fs/f2fs.h
+++ b/fs/f2fs/f2fs.h
@@ -955,6 +955,7 @@ struct f2fs_sm_info {
unsigned int segment_count; /* total # of segments */
unsigned int main_segments; /* # of segments in main area */
unsigned int reserved_segments; /* # of reserved segments */
+ unsigned int additional_reserved_segments;/* reserved segs for IO align feature */
unsigned int ovp_segments; /* # of overprovision segments */
/* a threshold to reclaim prefree segments */
@@ -1984,6 +1985,11 @@ static inline int inc_valid_block_count(
if (!__allow_reserved_blocks(sbi, inode, true))
avail_user_block_count -= F2FS_OPTION(sbi).root_reserved_blocks;
+
+ if (F2FS_IO_ALIGNED(sbi))
+ avail_user_block_count -= sbi->blocks_per_seg *
+ SM_I(sbi)->additional_reserved_segments;
+
if (unlikely(is_sbi_flag_set(sbi, SBI_CP_DISABLED))) {
if (avail_user_block_count > sbi->unusable_block_count)
avail_user_block_count -= sbi->unusable_block_count;
@@ -2229,6 +2235,11 @@ static inline int inc_valid_node_count(s
if (!__allow_reserved_blocks(sbi, inode, false))
valid_block_count += F2FS_OPTION(sbi).root_reserved_blocks;
+
+ if (F2FS_IO_ALIGNED(sbi))
+ valid_block_count += sbi->blocks_per_seg *
+ SM_I(sbi)->additional_reserved_segments;
+
user_block_count = sbi->user_block_count;
if (unlikely(is_sbi_flag_set(sbi, SBI_CP_DISABLED)))
user_block_count -= sbi->unusable_block_count;
--- a/fs/f2fs/segment.h
+++ b/fs/f2fs/segment.h
@@ -539,7 +539,8 @@ static inline unsigned int free_segments
static inline unsigned int reserved_segments(struct f2fs_sb_info *sbi)
{
- return SM_I(sbi)->reserved_segments;
+ return SM_I(sbi)->reserved_segments +
+ SM_I(sbi)->additional_reserved_segments;
}
static inline unsigned int free_sections(struct f2fs_sb_info *sbi)
--- a/fs/f2fs/super.c
+++ b/fs/f2fs/super.c
@@ -289,6 +289,46 @@ static inline void limit_reserve_root(st
F2FS_OPTION(sbi).s_resgid));
}
+static inline int adjust_reserved_segment(struct f2fs_sb_info *sbi)
+{
+ unsigned int sec_blks = sbi->blocks_per_seg * sbi->segs_per_sec;
+ unsigned int avg_vblocks;
+ unsigned int wanted_reserved_segments;
+ block_t avail_user_block_count;
+
+ if (!F2FS_IO_ALIGNED(sbi))
+ return 0;
+
+ /* average valid block count in section in worst case */
+ avg_vblocks = sec_blks / F2FS_IO_SIZE(sbi);
+
+ /*
+ * we need enough free space when migrating one section in worst case
+ */
+ wanted_reserved_segments = (F2FS_IO_SIZE(sbi) / avg_vblocks) *
+ reserved_segments(sbi);
+ wanted_reserved_segments -= reserved_segments(sbi);
+
+ avail_user_block_count = sbi->user_block_count -
+ sbi->current_reserved_blocks -
+ F2FS_OPTION(sbi).root_reserved_blocks;
+
+ if (wanted_reserved_segments * sbi->blocks_per_seg >
+ avail_user_block_count) {
+ f2fs_err(sbi, "IO align feature can't grab additional reserved segment: %u, available segments: %u",
+ wanted_reserved_segments,
+ avail_user_block_count >> sbi->log_blocks_per_seg);
+ return -ENOSPC;
+ }
+
+ SM_I(sbi)->additional_reserved_segments = wanted_reserved_segments;
+
+ f2fs_info(sbi, "IO align feature needs additional reserved segment: %u",
+ wanted_reserved_segments);
+
+ return 0;
+}
+
static inline void adjust_unusable_cap_perc(struct f2fs_sb_info *sbi)
{
if (!F2FS_OPTION(sbi).unusable_cap_perc)
@@ -3736,6 +3776,10 @@ try_onemore:
goto free_nm;
}
+ err = adjust_reserved_segment(sbi);
+ if (err)
+ goto free_nm;
+
/* For write statistics */
if (sb->s_bdev->bd_part)
sbi->sectors_written_start =
--- a/fs/f2fs/sysfs.c
+++ b/fs/f2fs/sysfs.c
@@ -330,7 +330,9 @@ out:
if (a->struct_type == RESERVED_BLOCKS) {
spin_lock(&sbi->stat_lock);
if (t > (unsigned long)(sbi->user_block_count -
- F2FS_OPTION(sbi).root_reserved_blocks)) {
+ F2FS_OPTION(sbi).root_reserved_blocks -
+ sbi->blocks_per_seg *
+ SM_I(sbi)->additional_reserved_segments)) {
spin_unlock(&sbi->stat_lock);
return -EINVAL;
}
From: Harshad Shirwadkar <[email protected]>
commit c27c29c6af4f3f4ce925a2111c256733c5a5b430 upstream.
It is not guaranteed that __ext4_get_inode_loc will definitely set
err_blk pointer when it returns EIO. To avoid using uninitialized
variables, let's first set err_blk to 0.
Reported-by: Dan Carpenter <[email protected]>
Signed-off-by: Harshad Shirwadkar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/inode.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -4445,7 +4445,7 @@ has_buffer:
static int __ext4_get_inode_loc_noinmem(struct inode *inode,
struct ext4_iloc *iloc)
{
- ext4_fsblk_t err_blk;
+ ext4_fsblk_t err_blk = 0;
int ret;
ret = __ext4_get_inode_loc(inode->i_sb, inode->i_ino, iloc, 0,
@@ -4460,7 +4460,7 @@ static int __ext4_get_inode_loc_noinmem(
int ext4_get_inode_loc(struct inode *inode, struct ext4_iloc *iloc)
{
- ext4_fsblk_t err_blk;
+ ext4_fsblk_t err_blk = 0;
int ret;
/* We have all inode data except xattrs in memory here. */
From: Ye Bin <[email protected]>
commit 298b5c521746d69c07beb2757292fb5ccc1b0f85 upstream.
We got issue as follows when run syzkaller test:
[ 1901.130043] EXT4-fs error (device vda): ext4_remount:5624: comm syz-executor.5: Abort forced by user
[ 1901.130901] Aborting journal on device vda-8.
[ 1901.131437] EXT4-fs error (device vda): ext4_journal_check_start:61: comm syz-executor.16: Detected aborted journal
[ 1901.131566] EXT4-fs error (device vda): ext4_journal_check_start:61: comm syz-executor.11: Detected aborted journal
[ 1901.132586] EXT4-fs error (device vda): ext4_journal_check_start:61: comm syz-executor.18: Detected aborted journal
[ 1901.132751] EXT4-fs error (device vda): ext4_journal_check_start:61: comm syz-executor.9: Detected aborted journal
[ 1901.136149] EXT4-fs error (device vda) in ext4_reserve_inode_write:6035: Journal has aborted
[ 1901.136837] EXT4-fs error (device vda): ext4_journal_check_start:61: comm syz-fuzzer: Detected aborted journal
[ 1901.136915] ==================================================================
[ 1901.138175] BUG: KASAN: null-ptr-deref in __ext4_journal_ensure_credits+0x74/0x140 [ext4]
[ 1901.138343] EXT4-fs error (device vda): ext4_journal_check_start:61: comm syz-executor.13: Detected aborted journal
[ 1901.138398] EXT4-fs error (device vda): ext4_journal_check_start:61: comm syz-executor.1: Detected aborted journal
[ 1901.138808] Read of size 8 at addr 0000000000000000 by task syz-executor.17/968
[ 1901.138817]
[ 1901.138852] EXT4-fs error (device vda): ext4_journal_check_start:61: comm syz-executor.30: Detected aborted journal
[ 1901.144779] CPU: 1 PID: 968 Comm: syz-executor.17 Not tainted 4.19.90-vhulk2111.1.0.h893.eulerosv2r10.aarch64+ #1
[ 1901.146479] Hardware name: linux,dummy-virt (DT)
[ 1901.147317] Call trace:
[ 1901.147552] dump_backtrace+0x0/0x2d8
[ 1901.147898] show_stack+0x28/0x38
[ 1901.148215] dump_stack+0xec/0x15c
[ 1901.148746] kasan_report+0x108/0x338
[ 1901.149207] __asan_load8+0x58/0xb0
[ 1901.149753] __ext4_journal_ensure_credits+0x74/0x140 [ext4]
[ 1901.150579] ext4_xattr_delete_inode+0xe4/0x700 [ext4]
[ 1901.151316] ext4_evict_inode+0x524/0xba8 [ext4]
[ 1901.151985] evict+0x1a4/0x378
[ 1901.152353] iput+0x310/0x428
[ 1901.152733] do_unlinkat+0x260/0x428
[ 1901.153056] __arm64_sys_unlinkat+0x6c/0xc0
[ 1901.153455] el0_svc_common+0xc8/0x320
[ 1901.153799] el0_svc_handler+0xf8/0x160
[ 1901.154265] el0_svc+0x10/0x218
[ 1901.154682] ==================================================================
This issue may happens like this:
Process1 Process2
ext4_evict_inode
ext4_journal_start
ext4_truncate
ext4_ind_truncate
ext4_free_branches
ext4_ind_truncate_ensure_credits
ext4_journal_ensure_credits_fn
ext4_journal_restart
handle->h_transaction = NULL;
mount -o remount,abort /mnt
-> trigger JBD abort
start_this_handle -> will return failed
ext4_xattr_delete_inode
ext4_journal_ensure_credits
ext4_journal_ensure_credits_fn
__ext4_journal_ensure_credits
jbd2_handle_buffer_credits
journal = handle->h_transaction->t_journal; ->null-ptr-deref
Now, indirect truncate process didn't handle error. To solve this issue
maybe simply add check handle is abort in '__ext4_journal_ensure_credits'
is enough, and i also think this is necessary.
Cc: [email protected]
Signed-off-by: Ye Bin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/ext4_jbd2.c | 2 ++
1 file changed, 2 insertions(+)
--- a/fs/ext4/ext4_jbd2.c
+++ b/fs/ext4/ext4_jbd2.c
@@ -162,6 +162,8 @@ int __ext4_journal_ensure_credits(handle
{
if (!ext4_handle_valid(handle))
return 0;
+ if (is_handle_aborted(handle))
+ return -EROFS;
if (jbd2_handle_buffer_credits(handle) >= check_cred &&
handle->h_revoke_credits >= revoke_cred)
return 0;
From: Yixing Liu <[email protected]>
commit 39d5534b1302189c809e90641ffae8cbdc42a8fc upstream.
It is more general for ARM device drivers to use the device attribute to
map PCI BAR spaces.
Fixes: 9a4435375cd1 ("IB/hns: Add driver files for hns RoCE driver")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Yixing Liu <[email protected]>
Signed-off-by: Wenpeng Liang <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/infiniband/hw/hns/hns_roce_main.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/infiniband/hw/hns/hns_roce_main.c
+++ b/drivers/infiniband/hw/hns/hns_roce_main.c
@@ -359,7 +359,7 @@ static int hns_roce_mmap(struct ib_ucont
return rdma_user_mmap_io(context, vma,
to_hr_ucontext(context)->uar.pfn,
PAGE_SIZE,
- pgprot_noncached(vma->vm_page_prot),
+ pgprot_device(vma->vm_page_prot),
NULL);
/* vm_pgoff: 1 -- TPTR */
From: Pali Rohár <[email protected]>
commit 12998087d9f48b66965b97412069c7826502cd7e upstream.
Some bits in PCI_EXP registers are reserved for non-root ports. Driver
pci-bridge-emul.c implements PCIe Root Port device therefore it should not
allow setting reserved bits of registers.
Properly define non-reserved bits for all PCI_EXP registers.
Link: https://lore.kernel.org/r/[email protected]
Fixes: 23a5fba4d941 ("PCI: Introduce PCI bridge emulated config space common logic")
Signed-off-by: Pali Rohár <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/pci-bridge-emul.c | 36 +++++++++++++++++++++++++-----------
1 file changed, 25 insertions(+), 11 deletions(-)
--- a/drivers/pci/pci-bridge-emul.c
+++ b/drivers/pci/pci-bridge-emul.c
@@ -176,41 +176,55 @@ struct pci_bridge_reg_behavior pcie_cap_
[PCI_CAP_LIST_ID / 4] = {
/*
* Capability ID, Next Capability Pointer and
- * Capabilities register are all read-only.
+ * bits [14:0] of Capabilities register are all read-only.
+ * Bit 15 of Capabilities register is reserved.
*/
- .ro = ~0,
+ .ro = GENMASK(30, 0),
},
[PCI_EXP_DEVCAP / 4] = {
- .ro = ~0,
+ /*
+ * Bits [31:29] and [17:16] are reserved.
+ * Bits [27:18] are reserved for non-upstream ports.
+ * Bits 28 and [14:6] are reserved for non-endpoint devices.
+ * Other bits are read-only.
+ */
+ .ro = BIT(15) | GENMASK(5, 0),
},
[PCI_EXP_DEVCTL / 4] = {
- /* Device control register is RW */
- .rw = GENMASK(15, 0),
+ /*
+ * Device control register is RW, except bit 15 which is
+ * reserved for non-endpoints or non-PCIe-to-PCI/X bridges.
+ */
+ .rw = GENMASK(14, 0),
/*
* Device status register has bits 6 and [3:0] W1C, [5:4] RO,
- * the rest is reserved
+ * the rest is reserved. Also bit 6 is reserved for non-upstream
+ * ports.
*/
- .w1c = (BIT(6) | GENMASK(3, 0)) << 16,
+ .w1c = GENMASK(3, 0) << 16,
.ro = GENMASK(5, 4) << 16,
},
[PCI_EXP_LNKCAP / 4] = {
- /* All bits are RO, except bit 23 which is reserved */
- .ro = lower_32_bits(~BIT(23)),
+ /*
+ * All bits are RO, except bit 23 which is reserved and
+ * bit 18 which is reserved for non-upstream ports.
+ */
+ .ro = lower_32_bits(~(BIT(23) | PCI_EXP_LNKCAP_CLKPM)),
},
[PCI_EXP_LNKCTL / 4] = {
/*
* Link control has bits [15:14], [11:3] and [1:0] RW, the
- * rest is reserved.
+ * rest is reserved. Bit 8 is reserved for non-upstream ports.
*
* Link status has bits [13:0] RO, and bits [15:14]
* W1C.
*/
- .rw = GENMASK(15, 14) | GENMASK(11, 3) | GENMASK(1, 0),
+ .rw = GENMASK(15, 14) | GENMASK(11, 9) | GENMASK(7, 3) | GENMASK(1, 0),
.ro = GENMASK(13, 0) << 16,
.w1c = GENMASK(15, 14) << 16,
},
From: Christian König <[email protected]>
commit 4722f463896cc0ef1a6f1c3cb2e171e949831249 upstream.
The return value was never initialized so the cleanup code executed when
it isn't even necessary.
Just add proper error handling.
Fixes: ab50cb9df889 ("drm/radeon/radeon_kms: Fix a NULL pointer dereference in radeon_driver_open_kms()")
Signed-off-by: Christian König <[email protected]>
Tested-by: Jan Stancek <[email protected]>
Tested-by: Borislav Petkov <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/radeon/radeon_kms.c | 22 ++++++++++++----------
1 file changed, 12 insertions(+), 10 deletions(-)
--- a/drivers/gpu/drm/radeon/radeon_kms.c
+++ b/drivers/gpu/drm/radeon/radeon_kms.c
@@ -652,18 +652,18 @@ int radeon_driver_open_kms(struct drm_de
fpriv = kzalloc(sizeof(*fpriv), GFP_KERNEL);
if (unlikely(!fpriv)) {
r = -ENOMEM;
- goto out_suspend;
+ goto err_suspend;
}
if (rdev->accel_working) {
vm = &fpriv->vm;
r = radeon_vm_init(rdev, vm);
if (r)
- goto out_fpriv;
+ goto err_fpriv;
r = radeon_bo_reserve(rdev->ring_tmp_bo.bo, false);
if (r)
- goto out_vm_fini;
+ goto err_vm_fini;
/* map the ib pool buffer read only into
* virtual address space */
@@ -671,7 +671,7 @@ int radeon_driver_open_kms(struct drm_de
rdev->ring_tmp_bo.bo);
if (!vm->ib_bo_va) {
r = -ENOMEM;
- goto out_vm_fini;
+ goto err_vm_fini;
}
r = radeon_vm_bo_set_addr(rdev, vm->ib_bo_va,
@@ -679,19 +679,21 @@ int radeon_driver_open_kms(struct drm_de
RADEON_VM_PAGE_READABLE |
RADEON_VM_PAGE_SNOOPED);
if (r)
- goto out_vm_fini;
+ goto err_vm_fini;
}
file_priv->driver_priv = fpriv;
}
- if (!r)
- goto out_suspend;
+ pm_runtime_mark_last_busy(dev->dev);
+ pm_runtime_put_autosuspend(dev->dev);
+ return 0;
-out_vm_fini:
+err_vm_fini:
radeon_vm_fini(rdev, vm);
-out_fpriv:
+err_fpriv:
kfree(fpriv);
-out_suspend:
+
+err_suspend:
pm_runtime_mark_last_busy(dev->dev);
pm_runtime_put_autosuspend(dev->dev);
return r;
From: Josef Bacik <[email protected]>
commit 120de408e4b97504a2d9b5ca534b383de2c73d49 upstream.
Now that we clear the extent buffer uptodate if we fail to write it out
we need to check to see if our root node is uptodate before we search
down it. Otherwise we could return stale data (or potentially corrupt
data that was caught by the write verification step) and think that the
path is OK to search down.
CC: [email protected] # 5.4+
Reviewed-by: Nikolay Borisov <[email protected]>
Signed-off-by: Josef Bacik <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/btrfs/ctree.c | 19 +++++++++++++++----
1 file changed, 15 insertions(+), 4 deletions(-)
--- a/fs/btrfs/ctree.c
+++ b/fs/btrfs/ctree.c
@@ -2589,12 +2589,9 @@ static struct extent_buffer *btrfs_searc
{
struct btrfs_fs_info *fs_info = root->fs_info;
struct extent_buffer *b;
- int root_lock;
+ int root_lock = 0;
int level = 0;
- /* We try very hard to do read locks on the root */
- root_lock = BTRFS_READ_LOCK;
-
if (p->search_commit_root) {
/*
* The commit roots are read only so we always do read locks,
@@ -2632,6 +2629,9 @@ static struct extent_buffer *btrfs_searc
goto out;
}
+ /* We try very hard to do read locks on the root */
+ root_lock = BTRFS_READ_LOCK;
+
/*
* If the level is set to maximum, we can skip trying to get the read
* lock.
@@ -2658,6 +2658,17 @@ static struct extent_buffer *btrfs_searc
level = btrfs_header_level(b);
out:
+ /*
+ * The root may have failed to write out at some point, and thus is no
+ * longer valid, return an error in this case.
+ */
+ if (!extent_buffer_uptodate(b)) {
+ if (root_lock)
+ btrfs_tree_unlock_rw(b, root_lock);
+ free_extent_buffer(b);
+ return ERR_PTR(-EIO);
+ }
+
p->nodes[level] = b;
if (!p->skip_locking)
p->locks[level] = root_lock;
From: Eric Dumazet <[email protected]>
commit 0a6e6b3c7db6c34e3d149f09cd714972f8753e3f upstream.
In the past, free_fib_info() was supposed to be called
under RTNL protection.
This eventually was no longer the case.
Instead of enforcing RTNL it seems we simply can
move fib_info_cnt changes to occur when fib_info_lock
is held.
v2: David Laight suggested to update fib_info_cnt
only when an entry is added/deleted to/from the hash table,
as fib_info_cnt is used to make sure hash table size
is optimal.
BUG: KCSAN: data-race in fib_create_info / free_fib_info
write to 0xffffffff86e243a0 of 4 bytes by task 26429 on cpu 0:
fib_create_info+0xe78/0x3440 net/ipv4/fib_semantics.c:1428
fib_table_insert+0x148/0x10c0 net/ipv4/fib_trie.c:1224
fib_magic+0x195/0x1e0 net/ipv4/fib_frontend.c:1087
fib_add_ifaddr+0xd0/0x2e0 net/ipv4/fib_frontend.c:1109
fib_netdev_event+0x178/0x510 net/ipv4/fib_frontend.c:1466
notifier_call_chain kernel/notifier.c:83 [inline]
raw_notifier_call_chain+0x53/0xb0 kernel/notifier.c:391
__dev_notify_flags+0x1d3/0x3b0
dev_change_flags+0xa2/0xc0 net/core/dev.c:8872
do_setlink+0x810/0x2410 net/core/rtnetlink.c:2719
rtnl_group_changelink net/core/rtnetlink.c:3242 [inline]
__rtnl_newlink net/core/rtnetlink.c:3396 [inline]
rtnl_newlink+0xb10/0x13b0 net/core/rtnetlink.c:3506
rtnetlink_rcv_msg+0x745/0x7e0 net/core/rtnetlink.c:5571
netlink_rcv_skb+0x14e/0x250 net/netlink/af_netlink.c:2496
rtnetlink_rcv+0x18/0x20 net/core/rtnetlink.c:5589
netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
netlink_unicast+0x5fc/0x6c0 net/netlink/af_netlink.c:1345
netlink_sendmsg+0x726/0x840 net/netlink/af_netlink.c:1921
sock_sendmsg_nosec net/socket.c:704 [inline]
sock_sendmsg net/socket.c:724 [inline]
____sys_sendmsg+0x39a/0x510 net/socket.c:2409
___sys_sendmsg net/socket.c:2463 [inline]
__sys_sendmsg+0x195/0x230 net/socket.c:2492
__do_sys_sendmsg net/socket.c:2501 [inline]
__se_sys_sendmsg net/socket.c:2499 [inline]
__x64_sys_sendmsg+0x42/0x50 net/socket.c:2499
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
read to 0xffffffff86e243a0 of 4 bytes by task 31505 on cpu 1:
free_fib_info+0x35/0x80 net/ipv4/fib_semantics.c:252
fib_info_put include/net/ip_fib.h:575 [inline]
nsim_fib4_rt_destroy drivers/net/netdevsim/fib.c:294 [inline]
nsim_fib4_rt_replace drivers/net/netdevsim/fib.c:403 [inline]
nsim_fib4_rt_insert drivers/net/netdevsim/fib.c:431 [inline]
nsim_fib4_event drivers/net/netdevsim/fib.c:461 [inline]
nsim_fib_event drivers/net/netdevsim/fib.c:881 [inline]
nsim_fib_event_work+0x15ca/0x2cf0 drivers/net/netdevsim/fib.c:1477
process_one_work+0x3fc/0x980 kernel/workqueue.c:2298
process_scheduled_works kernel/workqueue.c:2361 [inline]
worker_thread+0x7df/0xa70 kernel/workqueue.c:2447
kthread+0x2c7/0x2e0 kernel/kthread.c:327
ret_from_fork+0x1f/0x30
value changed: 0x00000d2d -> 0x00000d2e
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 31505 Comm: kworker/1:21 Not tainted 5.16.0-rc6-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: events nsim_fib_event_work
Fixes: 48bb9eb47b27 ("netdevsim: fib: Add dummy implementation for FIB offload")
Signed-off-by: Eric Dumazet <[email protected]>
Reported-by: syzbot <[email protected]>
Cc: David Laight <[email protected]>
Cc: Ido Schimmel <[email protected]>
Cc: Jiri Pirko <[email protected]>
Reviewed-by: Ido Schimmel <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv4/fib_semantics.c | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
--- a/net/ipv4/fib_semantics.c
+++ b/net/ipv4/fib_semantics.c
@@ -251,7 +251,6 @@ void free_fib_info(struct fib_info *fi)
pr_warn("Freeing alive fib_info %p\n", fi);
return;
}
- fib_info_cnt--;
call_rcu(&fi->rcu, free_fib_info_rcu);
}
@@ -262,6 +261,10 @@ void fib_release_info(struct fib_info *f
spin_lock_bh(&fib_info_lock);
if (fi && --fi->fib_treeref == 0) {
hlist_del(&fi->fib_hash);
+
+ /* Paired with READ_ONCE() in fib_create_info(). */
+ WRITE_ONCE(fib_info_cnt, fib_info_cnt - 1);
+
if (fi->fib_prefsrc)
hlist_del(&fi->fib_lhash);
if (fi->nh) {
@@ -1431,7 +1434,9 @@ struct fib_info *fib_create_info(struct
#endif
err = -ENOBUFS;
- if (fib_info_cnt >= fib_info_hash_size) {
+
+ /* Paired with WRITE_ONCE() in fib_release_info() */
+ if (READ_ONCE(fib_info_cnt) >= fib_info_hash_size) {
unsigned int new_size = fib_info_hash_size << 1;
struct hlist_head *new_info_hash;
struct hlist_head *new_laddrhash;
@@ -1463,7 +1468,6 @@ struct fib_info *fib_create_info(struct
return ERR_PTR(err);
}
- fib_info_cnt++;
fi->fib_net = net;
fi->fib_protocol = cfg->fc_protocol;
fi->fib_scope = cfg->fc_scope;
@@ -1590,6 +1594,7 @@ link_it:
fi->fib_treeref++;
refcount_set(&fi->fib_clntref, 1);
spin_lock_bh(&fib_info_lock);
+ fib_info_cnt++;
hlist_add_head(&fi->fib_hash,
&fib_info_hash[fib_info_hashfn(fi)]);
if (fi->fib_prefsrc) {
From: Anders Roxell <[email protected]>
commit e89257e28e844f5d1d39081bb901d9f1183a7705 upstream.
Clang warns:
arch/powerpc/platforms/cell/pervasive.c:81:2: error: unannotated fall-through between switch labels
case SRR1_WAKEEE:
^
arch/powerpc/platforms/cell/pervasive.c:81:2: note: insert 'break;' to avoid fall-through
case SRR1_WAKEEE:
^
break;
1 error generated.
Clang is more pedantic than GCC, which does not warn when failing
through to a case that is just break or return. Clang's version is more
in line with the kernel's own stance in deprecated.rst. Add athe missing
break to silence the warning.
Fixes: 6e83985b0f6e ("powerpc/cbe: Do not process external or decremeter interrupts from sreset")
Reported-by: Naresh Kamboju <[email protected]>
Signed-off-by: Anders Roxell <[email protected]>
Reviewed-by: Nathan Chancellor <[email protected]>
Reviewed-by: Arnd Bergmann <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/platforms/cell/pervasive.c | 1 +
1 file changed, 1 insertion(+)
--- a/arch/powerpc/platforms/cell/pervasive.c
+++ b/arch/powerpc/platforms/cell/pervasive.c
@@ -77,6 +77,7 @@ static int cbe_system_reset_exception(st
switch (regs->msr & SRR1_WAKEMASK) {
case SRR1_WAKEDEC:
set_dec(1);
+ break;
case SRR1_WAKEEE:
/*
* Handle these when interrupts get re-enabled and we take
From: Hans de Goede <[email protected]>
commit 085a9f43433f30cbe8a1ade62d9d7827c3217f4d upstream.
Use down_read_nested() and down_write_nested() when taking the
ctrl->reset_lock rw-sem, passing the number of PCIe hotplug controllers in
the path to the PCI root bus as lock subclass parameter.
This fixes the following false-positive lockdep report when unplugging a
Lenovo X1C8 from a Lenovo 2nd gen TB3 dock:
pcieport 0000:06:01.0: pciehp: Slot(1): Link Down
pcieport 0000:06:01.0: pciehp: Slot(1): Card not present
============================================
WARNING: possible recursive locking detected
5.16.0-rc2+ #621 Not tainted
--------------------------------------------
irq/124-pciehp/86 is trying to acquire lock:
ffff8e5ac4299ef8 (&ctrl->reset_lock){.+.+}-{3:3}, at: pciehp_check_presence+0x23/0x80
but task is already holding lock:
ffff8e5ac4298af8 (&ctrl->reset_lock){.+.+}-{3:3}, at: pciehp_ist+0xf3/0x180
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&ctrl->reset_lock);
lock(&ctrl->reset_lock);
*** DEADLOCK ***
May be due to missing lock nesting notation
3 locks held by irq/124-pciehp/86:
#0: ffff8e5ac4298af8 (&ctrl->reset_lock){.+.+}-{3:3}, at: pciehp_ist+0xf3/0x180
#1: ffffffffa3b024e8 (pci_rescan_remove_lock){+.+.}-{3:3}, at: pciehp_unconfigure_device+0x31/0x110
#2: ffff8e5ac1ee2248 (&dev->mutex){....}-{3:3}, at: device_release_driver+0x1c/0x40
stack backtrace:
CPU: 4 PID: 86 Comm: irq/124-pciehp Not tainted 5.16.0-rc2+ #621
Hardware name: LENOVO 20U90SIT19/20U90SIT19, BIOS N2WET30W (1.20 ) 08/26/2021
Call Trace:
<TASK>
dump_stack_lvl+0x59/0x73
__lock_acquire.cold+0xc5/0x2c6
lock_acquire+0xb5/0x2b0
down_read+0x3e/0x50
pciehp_check_presence+0x23/0x80
pciehp_runtime_resume+0x5c/0xa0
device_for_each_child+0x45/0x70
pcie_port_device_runtime_resume+0x20/0x30
pci_pm_runtime_resume+0xa7/0xc0
__rpm_callback+0x41/0x110
rpm_callback+0x59/0x70
rpm_resume+0x512/0x7b0
__pm_runtime_resume+0x4a/0x90
__device_release_driver+0x28/0x240
device_release_driver+0x26/0x40
pci_stop_bus_device+0x68/0x90
pci_stop_bus_device+0x2c/0x90
pci_stop_and_remove_bus_device+0xe/0x20
pciehp_unconfigure_device+0x6c/0x110
pciehp_disable_slot+0x5b/0xe0
pciehp_handle_presence_or_link_change+0xc3/0x2f0
pciehp_ist+0x179/0x180
This lockdep warning is triggered because with Thunderbolt, hotplug ports
are nested. When removing multiple devices in a daisy-chain, each hotplug
port's reset_lock may be acquired recursively. It's never the same lock, so
the lockdep splat is a false positive.
Because locks at the same hierarchy level are never acquired recursively, a
per-level lockdep class is sufficient to fix the lockdep warning.
The choice to use one lockdep subclass per pcie-hotplug controller in the
path to the root-bus was made to conserve class keys because their number
is limited and the complexity grows quadratically with number of keys
according to Documentation/locking/lockdep-design.rst.
Link: https://lore.kernel.org/linux-pci/[email protected]/
Link: https://lore.kernel.org/linux-pci/[email protected]/
Link: https://lore.kernel.org/r/[email protected]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=208855
Reported-by: "Theodore Ts'o" <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Reviewed-by: Lukas Wunner <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/hotplug/pciehp.h | 3 +++
drivers/pci/hotplug/pciehp_core.c | 2 +-
drivers/pci/hotplug/pciehp_hpc.c | 21 ++++++++++++++++++---
3 files changed, 22 insertions(+), 4 deletions(-)
--- a/drivers/pci/hotplug/pciehp.h
+++ b/drivers/pci/hotplug/pciehp.h
@@ -72,6 +72,8 @@ extern int pciehp_poll_time;
* @reset_lock: prevents access to the Data Link Layer Link Active bit in the
* Link Status register and to the Presence Detect State bit in the Slot
* Status register during a slot reset which may cause them to flap
+ * @depth: Number of additional hotplug ports in the path to the root bus,
+ * used as lock subclass for @reset_lock
* @ist_running: flag to keep user request waiting while IRQ thread is running
* @request_result: result of last user request submitted to the IRQ thread
* @requester: wait queue to wake up on completion of user request,
@@ -103,6 +105,7 @@ struct controller {
struct hotplug_slot hotplug_slot; /* hotplug core interface */
struct rw_semaphore reset_lock;
+ unsigned int depth;
unsigned int ist_running;
int request_result;
wait_queue_head_t requester;
--- a/drivers/pci/hotplug/pciehp_core.c
+++ b/drivers/pci/hotplug/pciehp_core.c
@@ -166,7 +166,7 @@ static void pciehp_check_presence(struct
{
int occupied;
- down_read(&ctrl->reset_lock);
+ down_read_nested(&ctrl->reset_lock, ctrl->depth);
mutex_lock(&ctrl->state_lock);
occupied = pciehp_card_present_or_link_active(ctrl);
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -583,7 +583,7 @@ static void pciehp_ignore_dpc_link_chang
* the corresponding link change may have been ignored above.
* Synthesize it to ensure that it is acted on.
*/
- down_read(&ctrl->reset_lock);
+ down_read_nested(&ctrl->reset_lock, ctrl->depth);
if (!pciehp_check_link_active(ctrl))
pciehp_request(ctrl, PCI_EXP_SLTSTA_DLLSC);
up_read(&ctrl->reset_lock);
@@ -746,7 +746,7 @@ static irqreturn_t pciehp_ist(int irq, v
* Disable requests have higher priority than Presence Detect Changed
* or Data Link Layer State Changed events.
*/
- down_read(&ctrl->reset_lock);
+ down_read_nested(&ctrl->reset_lock, ctrl->depth);
if (events & DISABLE_SLOT)
pciehp_handle_disable_request(ctrl);
else if (events & (PCI_EXP_SLTSTA_PDC | PCI_EXP_SLTSTA_DLLSC))
@@ -880,7 +880,7 @@ int pciehp_reset_slot(struct hotplug_slo
if (probe)
return 0;
- down_write(&ctrl->reset_lock);
+ down_write_nested(&ctrl->reset_lock, ctrl->depth);
if (!ATTN_BUTTN(ctrl)) {
ctrl_mask |= PCI_EXP_SLTCTL_PDCE;
@@ -936,6 +936,20 @@ static inline void dbg_ctrl(struct contr
#define FLAG(x, y) (((x) & (y)) ? '+' : '-')
+static inline int pcie_hotplug_depth(struct pci_dev *dev)
+{
+ struct pci_bus *bus = dev->bus;
+ int depth = 0;
+
+ while (bus->parent) {
+ bus = bus->parent;
+ if (bus->self && bus->self->is_hotplug_bridge)
+ depth++;
+ }
+
+ return depth;
+}
+
struct controller *pcie_init(struct pcie_device *dev)
{
struct controller *ctrl;
@@ -949,6 +963,7 @@ struct controller *pcie_init(struct pcie
return NULL;
ctrl->pcie = dev;
+ ctrl->depth = pcie_hotplug_depth(dev->port);
pcie_capability_read_dword(pdev, PCI_EXP_SLTCAP, &slot_cap);
if (pdev->hotplug_user_indicators)
From: Moshe Shemesh <[email protected]>
commit 4f6626b0e140867fd6d5a2e9d4ceaef97f10f46a upstream.
This reverts commit 410bd754cd73c4a2ac3856d9a03d7b08f9c906bf.
The reverted commit had added a retry mechanism to the command entry
index allocation. The previous patch ensures that there is a free
command entry index once the command work handler holds the command
semaphore. Thus the retry mechanism is not needed.
Fixes: 410bd754cd73 ("net/mlx5: Add retry mechanism to the command entry index allocation")
Signed-off-by: Moshe Shemesh <[email protected]>
Reviewed-by: Eran Ben Elisha <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/mellanox/mlx5/core/cmd.c | 21 +--------------------
1 file changed, 1 insertion(+), 20 deletions(-)
--- a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c
@@ -887,25 +887,6 @@ static bool opcode_allowed(struct mlx5_c
return cmd->allowed_opcode == opcode;
}
-static int cmd_alloc_index_retry(struct mlx5_cmd *cmd)
-{
- unsigned long alloc_end = jiffies + msecs_to_jiffies(1000);
- int idx;
-
-retry:
- idx = cmd_alloc_index(cmd);
- if (idx < 0 && time_before(jiffies, alloc_end)) {
- /* Index allocation can fail on heavy load of commands. This is a temporary
- * situation as the current command already holds the semaphore, meaning that
- * another command completion is being handled and it is expected to release
- * the entry index soon.
- */
- cpu_relax();
- goto retry;
- }
- return idx;
-}
-
bool mlx5_cmd_is_down(struct mlx5_core_dev *dev)
{
return pci_channel_offline(dev->pdev) ||
@@ -930,7 +911,7 @@ static void cmd_work_handler(struct work
sem = ent->page_queue ? &cmd->pages_sem : &cmd->sem;
down(sem);
if (!ent->page_queue) {
- alloc_ret = cmd_alloc_index_retry(cmd);
+ alloc_ret = cmd_alloc_index(cmd);
if (alloc_ret < 0) {
mlx5_core_err_rl(dev, "failed to allocate command entry\n");
if (ent->callback) {
On 1/24/22 11:36 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.94 release.
> There are 563 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 26 Jan 2022 18:39:11 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.94-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Compiled and booted on my test system. No dmesg regressions.
Tested-by: Shuah Khan <[email protected]>
thanks,
-- Shuah
Hello!
On 1/24/22 12:36, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.94 release.
> There are 563 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 26 Jan 2022 18:39:11 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.94-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Regressions detected on arm, arm64, i386, x86.
This is from arm64:
/builds/linux/arch/arm64/mm/extable.c: In function 'fixup_exception':
/builds/linux/arch/arm64/mm/extable.c:17:13: error: implicit declaration of function 'in_bpf_jit' [-Werror=implicit-function-declaration]
17 | if (in_bpf_jit(regs))
| ^~~~~~~~~~
cc1: some warnings being treated as errors
make[3]: *** [/builds/linux/scripts/Makefile.build:280: arch/arm64/mm/extable.o] Error 1
And from Perf on arm, arm64, i386, x86:
libbpf.c: In function 'bpf_object__elf_collect':
libbpf.c:2873:31: error: invalid type argument of '->' (have 'GElf_Shdr' {aka 'Elf64_Shdr'})
2873 | if (sh->sh_type != SHT_PROGBITS)
| ^~
libbpf.c:2877:31: error: invalid type argument of '->' (have 'GElf_Shdr' {aka 'Elf64_Shdr'})
2877 | if (sh->sh_type != SHT_PROGBITS)
| ^~
make[4]: *** [/builds/linux/tools/build/Makefile.build:97: /home/tuxbuild/.cache/tuxmake/builds/current/staticobjs/libbpf.o] Error 1
Reported-by: Linux Kernel Functional Testing <[email protected]>
Greetings!
Daniel Díaz
[email protected]
On 1/24/2022 3:00 PM, Daniel Díaz wrote:
> Hello!
>
> On 1/24/22 12:36, Greg Kroah-Hartman wrote:
>> This is the start of the stable review cycle for the 5.10.94 release.
>> There are 563 patches in this series, all will be posted as a response
>> to this one. If anyone has any issues with these being applied, please
>> let me know.
>>
>> Responses should be made by Wed, 26 Jan 2022 18:39:11 +0000.
>> Anything received after that time might be too late.
>>
>> The whole patch series can be found in one patch at:
>> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.94-rc1.gz
>>
>> or in the git tree and branch at:
>> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
>> linux-5.10.y
>> and the diffstat can be found below.
>>
>> thanks,
>>
>> greg k-h
>
> Regressions detected on arm, arm64, i386, x86.
>
> This is from arm64:
> /builds/linux/arch/arm64/mm/extable.c: In function 'fixup_exception':
> /builds/linux/arch/arm64/mm/extable.c:17:13: error: implicit
> declaration of function 'in_bpf_jit'
> [-Werror=implicit-function-declaration]
> 17 | if (in_bpf_jit(regs))
> | ^~~~~~~~~~
> cc1: some warnings being treated as errors
> make[3]: *** [/builds/linux/scripts/Makefile.build:280:
> arch/arm64/mm/extable.o] Error 1
>
> And from Perf on arm, arm64, i386, x86:
> libbpf.c: In function 'bpf_object__elf_collect':
> libbpf.c:2873:31: error: invalid type argument of '->' (have
> 'GElf_Shdr' {aka 'Elf64_Shdr'})
> 2873 | if (sh->sh_type != SHT_PROGBITS)
> | ^~
> libbpf.c:2877:31: error: invalid type argument of '->' (have
> 'GElf_Shdr' {aka 'Elf64_Shdr'})
> 2877 | if (sh->sh_type != SHT_PROGBITS)
> | ^~
> make[4]: *** [/builds/linux/tools/build/Makefile.build:97:
> /home/tuxbuild/.cache/tuxmake/builds/current/staticobjs/libbpf.o] Error 1
>
> Reported-by: Linux Kernel Functional Testing <[email protected]>
Same here.
--
Florian
On Tue, 25 Jan 2022 at 04:30, Daniel Díaz <[email protected]> wrote:
>
> Hello!
>
> On 1/24/22 12:36, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 5.10.94 release.
> > There are 563 patches in this series, all will be posted as a response
> > to this one. If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Wed, 26 Jan 2022 18:39:11 +0000.
> > Anything received after that time might be too late.
> >
> > The whole patch series can be found in one patch at:
> > https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.94-rc1.gz
> > or in the git tree and branch at:
> > git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> > and the diffstat can be found below.
> >
> > thanks,
> >
> > greg k-h
>
Regressions detected on arm, arm64, i386, x86 on 5.10 and 5.15.
> This is from arm64:
> /builds/linux/arch/arm64/mm/extable.c: In function 'fixup_exception':
> /builds/linux/arch/arm64/mm/extable.c:17:13: error: implicit declaration of function 'in_bpf_jit' [-Werror=implicit-function-declaration]
> 17 | if (in_bpf_jit(regs))
> | ^~~~~~~~~~
> cc1: some warnings being treated as errors
> make[3]: *** [/builds/linux/scripts/Makefile.build:280: arch/arm64/mm/extable.o] Error 1
>
> And from Perf on arm, arm64, i386, x86:
> libbpf.c: In function 'bpf_object__elf_collect':
> libbpf.c:2873:31: error: invalid type argument of '->' (have 'GElf_Shdr' {aka 'Elf64_Shdr'})
> 2873 | if (sh->sh_type != SHT_PROGBITS)
> | ^~
> libbpf.c:2877:31: error: invalid type argument of '->' (have 'GElf_Shdr' {aka 'Elf64_Shdr'})
> 2877 | if (sh->sh_type != SHT_PROGBITS)
> | ^~
> make[4]: *** [/builds/linux/tools/build/Makefile.build:97: /home/tuxbuild/.cache/tuxmake/builds/current/staticobjs/libbpf.o] Error 1
Due to this patch,
arm64/bpf: Remove 128MB limit for BPF JIT programs
commit b89ddf4cca43f1269093942cf5c4e457fd45c335 upstream.
Reported-by: Linux Kernel Functional Testing <[email protected]>
--
Linaro LKFT
https://lkft.linaro.org
Hi!
> From: Jiasheng Jiang <[email protected]>
>
> [ Upstream commit eec91694f927d1026974444eb6a3adccd4f1cbc2 ]
>
> The return value of dma_set_coherent_mask() is not always 0.
> To catch the exception in case that dma is not support the mask.
>
> Fixes: 0a0c3b5a24bd ("Add new uio device for dynamic memory allocation")
> +++ b/drivers/uio/uio_dmem_genirq.c
> @@ -183,7 +183,11 @@ static int uio_dmem_genirq_probe(struct platform_device *pdev)
> goto bad0;
> }
>
> - dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
> + ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
> + if (ret) {
> + dev_err(&pdev->dev, "DMA enable failed\n");
> + return ret;
> + }
Handing errors is good, but you may not directly return here as it
would leak the resources. Something like this?
Signed-off-by: Pavel Machek <[email protected]>
Best regards,
Pavel
diff --git a/drivers/uio/uio_dmem_genirq.c b/drivers/uio/uio_dmem_genirq.c
index bf39a424ea77..7b80d0c02735 100644
--- a/drivers/uio/uio_dmem_genirq.c
+++ b/drivers/uio/uio_dmem_genirq.c
@@ -186,7 +186,7 @@ static int uio_dmem_genirq_probe(struct platform_device *pdev)
ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
if (ret) {
dev_err(&pdev->dev, "DMA enable failed\n");
- return ret;
+ goto bad0;
}
priv->uioinfo = uioinfo;
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
On Tue, Jan 25, 2022 at 11:47:25AM +0100, Pavel Machek wrote:
> Hi!
>
> > From: Jiasheng Jiang <[email protected]>
> >
> > [ Upstream commit eec91694f927d1026974444eb6a3adccd4f1cbc2 ]
> >
> > The return value of dma_set_coherent_mask() is not always 0.
> > To catch the exception in case that dma is not support the mask.
> >
> > Fixes: 0a0c3b5a24bd ("Add new uio device for dynamic memory allocation")
>
>
> > +++ b/drivers/uio/uio_dmem_genirq.c
> > @@ -183,7 +183,11 @@ static int uio_dmem_genirq_probe(struct platform_device *pdev)
> > goto bad0;
> > }
> >
> > - dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
> > + ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
> > + if (ret) {
> > + dev_err(&pdev->dev, "DMA enable failed\n");
> > + return ret;
> > + }
>
> Handing errors is good, but you may not directly return here as it
> would leak the resources. Something like this?
>
> Signed-off-by: Pavel Machek <[email protected]>
>
> Best regards,
> Pavel
>
> diff --git a/drivers/uio/uio_dmem_genirq.c b/drivers/uio/uio_dmem_genirq.c
> index bf39a424ea77..7b80d0c02735 100644
> --- a/drivers/uio/uio_dmem_genirq.c
> +++ b/drivers/uio/uio_dmem_genirq.c
> @@ -186,7 +186,7 @@ static int uio_dmem_genirq_probe(struct platform_device *pdev)
> ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
> if (ret) {
> dev_err(&pdev->dev, "DMA enable failed\n");
> - return ret;
> + goto bad0;
> }
>
> priv->uioinfo = uioinfo;
>
>
>
> --
> DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Yeah, this commit should not be backported, I'll go drop it from
everywhere. But the original commit in Linus's tree is fine as the
error handling is not like this anymore.
thanks,
greg k-h
On Mon, Jan 24, 2022 at 07:54:58PM -0800, Florian Fainelli wrote:
>
>
> On 1/24/2022 3:00 PM, Daniel D?az wrote:
> > Hello!
> >
> > On 1/24/22 12:36, Greg Kroah-Hartman wrote:
> > > This is the start of the stable review cycle for the 5.10.94 release.
> > > There are 563 patches in this series, all will be posted as a response
> > > to this one.? If anyone has any issues with these being applied, please
> > > let me know.
> > >
> > > Responses should be made by Wed, 26 Jan 2022 18:39:11 +0000.
> > > Anything received after that time might be too late.
> > >
> > > The whole patch series can be found in one patch at:
> > > ????https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.94-rc1.gz
> > >
> > > or in the git tree and branch at:
> > > ????git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
> > > linux-5.10.y
> > > and the diffstat can be found below.
> > >
> > > thanks,
> > >
> > > greg k-h
> >
> > Regressions detected on arm, arm64, i386, x86.
> >
> > This is from arm64:
> > ? /builds/linux/arch/arm64/mm/extable.c: In function 'fixup_exception':
> > ? /builds/linux/arch/arm64/mm/extable.c:17:13: error: implicit
> > declaration of function 'in_bpf_jit'
> > [-Werror=implicit-function-declaration]
> > ???? 17 |???????? if (in_bpf_jit(regs))
> > ??????? |???????????? ^~~~~~~~~~
> > ? cc1: some warnings being treated as errors
> > ? make[3]: *** [/builds/linux/scripts/Makefile.build:280:
> > arch/arm64/mm/extable.o] Error 1
> >
> > And from Perf on arm, arm64, i386, x86:
> > ? libbpf.c: In function 'bpf_object__elf_collect':
> > ? libbpf.c:2873:31: error: invalid type argument of '->' (have
> > 'GElf_Shdr' {aka 'Elf64_Shdr'})
> > ?? 2873 |???????????????????????? if (sh->sh_type != SHT_PROGBITS)
> > ??????? |?????????????????????????????? ^~
> > ? libbpf.c:2877:31: error: invalid type argument of '->' (have
> > 'GElf_Shdr' {aka 'Elf64_Shdr'})
> > ?? 2877 |???????????????????????? if (sh->sh_type != SHT_PROGBITS)
> > ??????? |?????????????????????????????? ^~
> > ? make[4]: *** [/builds/linux/tools/build/Makefile.build:97:
> > /home/tuxbuild/.cache/tuxmake/builds/current/staticobjs/libbpf.o] Error
> > 1
> >
> > Reported-by: Linux Kernel Functional Testing <[email protected]>
>
> Same here.
Thanks, I'll go drop this from all 3 trees now.
greg k-h
Hi!
> Branch data available to BPF programs can be very useful to get stack traces
> out of userspace application.
>
> Commit fff7b64355ea ("bpf: Add bpf_read_branch_records() helper") added BPF
> support to capture branch records in x86. Enable this feature also for other
> architectures as well by removing checks specific to x86.
>
> If an architecture doesn't support branch records, bpf_read_branch_records()
> still has appropriate checks and it will return an -EINVAL in that scenario.
> Based on UAPI helper doc in include/uapi/linux/bpf.h, unsupported architectures
> should return -ENOENT in such case. Hence, update the appropriate check to
> return -ENOENT instead.
>
> Selftest 'perf_branches' result on power9 machine which has the branch stacks
> support:
>
> - Before this patch:
>
> [command]# ./test_progs -t perf_branches
> #88/1 perf_branches/perf_branches_hw:FAIL
> #88/2 perf_branches/perf_branches_no_hw:OK
> #88 perf_branches:FAIL
> Summary: 0/1 PASSED, 0 SKIPPED, 1 FAILED
>
> - After this patch:
>
> [command]# ./test_progs -t perf_branches
> #88/1 perf_branches/perf_branches_hw:OK
> #88/2 perf_branches/perf_branches_no_hw:OK
> #88 perf_branches:OK
> Summary: 1/2 PASSED, 0 SKIPPED, 0 FAILED
>
> Selftest 'perf_branches' result on power9 machine which doesn't have branch
> stack report:
>
> - After this patch:
>
> [command]# ./test_progs -t perf_branches
> #88/1 perf_branches/perf_branches_hw:SKIP
> #88/2 perf_branches/perf_branches_no_hw:OK
> #88 perf_branches:OK
> Summary: 1/1 PASSED, 1 SKIPPED, 0 FAILED
This makes me nervous, it is not really a bugfix and probably noone
tested it on the stable branch. It would be safer to keep it disabled.
Best regards,
Pavel
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Hi!
> [ Upstream commit 8dce43919566f06e865f7e8949f5c10d8c2493f5 ]
>
> xfrm interface if_id = 0 would cause xfrm policy lookup errors since
> Commit 9f8550e4bd9d.
>
> Now explicitly fail to create an xfrm interface when if_id = 0
This will break changelink completely, AFAICT.
> @@ -672,7 +677,12 @@ static int xfrmi_changelink(struct net_device *dev, struct nlattr *tb[],
> {
> struct xfrm_if *xi = netdev_priv(dev);
> struct net *net = xi->net;
> - struct xfrm_if_parms p;
> + struct xfrm_if_parms p = {};
> +
> + if (!p.if_id) {
> + NL_SET_ERR_MSG(extack, "if_id must be non zero");
> + return -EINVAL;
> + }
>
> xfrmi_netlink_parms(data, &p);
> xi = xfrmi_locate(net, &p);
if_id will be always 0, because it was not yet initialized.
Best regards,
Pavel
Signed-off-by: Pavel Machek <[email protected]>
diff --git a/net/xfrm/xfrm_interface.c b/net/xfrm/xfrm_interface.c
index 57448fc519fc..eb028b835f70 100644
--- a/net/xfrm/xfrm_interface.c
+++ b/net/xfrm/xfrm_interface.c
@@ -673,12 +673,11 @@ static int xfrmi_changelink(struct net_device *dev, struct nlattr *tb[],
struct net *net = xi->net;
struct xfrm_if_parms p = {};
+ xfrmi_netlink_parms(data, &p);
if (!p.if_id) {
NL_SET_ERR_MSG(extack, "if_id must be non zero");
return -EINVAL;
}
-
- xfrmi_netlink_parms(data, &p);
xi = xfrmi_locate(net, &p);
if (!xi) {
xi = netdev_priv(dev);
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
On Wed, Jan 26, 2022 at 10:59:37PM +0100, Pavel Machek wrote:
> Hi!
>
> > [ Upstream commit 8dce43919566f06e865f7e8949f5c10d8c2493f5 ]
> >
> > xfrm interface if_id = 0 would cause xfrm policy lookup errors since
> > Commit 9f8550e4bd9d.
> >
> > Now explicitly fail to create an xfrm interface when if_id = 0
>
> This will break changelink completely, AFAICT.
>
> > @@ -672,7 +677,12 @@ static int xfrmi_changelink(struct net_device *dev, struct nlattr *tb[],
> > {
> > struct xfrm_if *xi = netdev_priv(dev);
> > struct net *net = xi->net;
> > - struct xfrm_if_parms p;
> > + struct xfrm_if_parms p = {};
> > +
> > + if (!p.if_id) {
> > + NL_SET_ERR_MSG(extack, "if_id must be non zero");
> > + return -EINVAL;
> > + }
> >
> > xfrmi_netlink_parms(data, &p);
> > xi = xfrmi_locate(net, &p);
>
> if_id will be always 0, because it was not yet initialized.
>
> Best regards,
> Pavel
>
> Signed-off-by: Pavel Machek <[email protected]>
Can you please resend this with proper commit message and 'Fixes:' tag?
Thanks!