2022-02-19 18:06:09

by Nikita Travkin

Subject: [PATCH] arm64: dts: qcom: msm8916-longcheer-l8150: Add light and proximity sensor

L8150 uses LTR559 as a light and proximity sensor. Add it to the
devicetree.

Reviewed-by: Stephan Gerhold <[email protected]>
Signed-off-by: Nikita Travkin <[email protected]>
---
.../boot/dts/qcom/msm8916-longcheer-l8150.dts | 23 +++++++++++++++++++
1 file changed, 23 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
index 852de624f5af..b3836dde8a54 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
@@ -151,6 +151,21 @@ magnetometer@12 {
vddio-supply = <&pm8916_l6>;
};

+ light-sensor@23 {
+ compatible = "liteon,ltr559";
+ reg = <0x23>;
+ proximity-near-level = <75>;
+
+ interrupt-parent = <&msmgpio>;
+ interrupts = <115 IRQ_TYPE_EDGE_FALLING>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&light_int_default>;
+
+ vdd-supply = <&pm8916_l17>;
+ vio-supply = <&pm8916_l6>;
+ };
+
gyroscope@68 {
compatible = "bosch,bmg160";
reg = <0x68>;
@@ -392,6 +407,14 @@ gyro_int_default: gyro-int-default {
bias-disable;
};

+ light_int_default: light-int-default {
+ pins = "gpio115";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
magn_int_default: magn-int-default {
pins = "gpio113";
function = "gpio";
--
2.34.1

2022-02-24 21:10:27

by Bjorn Andersson

Subject: Re: [PATCH] arm64: dts: qcom: msm8916-longcheer-l8150: Add light and proximity sensor

On Sat, 19 Feb 2022 19:51:40 +0500, Nikita Travkin wrote:
> L8150 uses LTR559 as a light and proximity sensor. Add it to the
> devicetree.
>
>

Applied, thanks!

[1/1] arm64: dts: qcom: msm8916-longcheer-l8150: Add light and proximity sensor
commit: 3016af34ef8d3e3b802693c8d3878906c886621c

Best regards,
--
Bjorn Andersson <[email protected]>