2022-02-22 05:21:16

by Oscar Salvador

[permalink] [raw]
Subject: [PATCH v2] arch/x86/mm/numa: Do not initialize nodes twice

On x86, prior to ("mm: handle uninitialized numa nodes gracecully"),
NUMA nodes could be allocated at three different places.

- numa_register_memblks
- init_cpu_to_node
- init_gi_nodes

All these calls happen at setup_arch, and have the following order:

setup_arch
...
x86_numa_init
numa_init
numa_register_memblks
...
init_cpu_to_node
init_memory_less_node
alloc_node_data
free_area_init_memoryless_node
init_gi_nodes
init_memory_less_node
alloc_node_data
free_area_init_memoryless_node

numa_register_memblks() is only interested in those nodes which have memory,
so it skips over any memoryless node it founds.
Later on, when we have read ACPI's SRAT table, we call init_cpu_to_node()
and init_gi_nodes(), which initialize any memoryless node we might have
that have either CPU or Initiator affinity, meaning we allocate pg_data_t
struct for them and we mark them as ONLINE.

So far so good, but the thing is that after ("mm: handle uninitialized numa
nodes gracefully"), we allocate all possible NUMA nodes in free_area_init(),
meaning we have a picture like the following:

setup_arch
x86_numa_init
numa_init
numa_register_memblks <-- allocate non-memoryless node
x86_init.paging.pagetable_init
...
free_area_init
free_area_init_memoryless <-- allocate memoryless node
init_cpu_to_node
alloc_node_data <-- allocate memoryless node with CPU
free_area_init_memoryless_node
init_gi_nodes
alloc_node_data <-- allocate memoryless node with Initiator
free_area_init_memoryless_node

free_area_init() already allocates all possible NUMA nodes, but
init_cpu_to_node() and init_gi_nodes() are clueless about that,
so they go ahead and allocate a new pg_data_t struct without
checking anything, meaning we end up allocating twice.

It should be mad clear that this only happens in the case where
memoryless NUMA node happens to have a CPU/Initiator affinity.

So get rid of init_memory_less_node() and just set the node online.

Note that setting the node online is needed, otherwise we choke
down the chain when bringup_nonboot_cpus() ends up calling
__try_online_node()->register_one_node()->... and we blow up in
bus_add_device(). Like can be seen here:

=========
[ 0.585060] BUG: kernel NULL pointer dereference, address: 0000000000000060
[ 0.586091] #PF: supervisor read access in kernel mode
[ 0.586831] #PF: error_code(0x0000) - not-present page
[ 0.586930] PGD 0 P4D 0
[ 0.586930] Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI
[ 0.586930] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.17.0-rc4-1-default+ #45
[ 0.586930] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/4
[ 0.586930] RIP: 0010:bus_add_device+0x5a/0x140
[ 0.586930] Code: 8b 74 24 20 48 89 df e8 84 96 ff ff 85 c0 89 c5 75 38 48 8b 53 50 48 85 d2 0f 84 bb 00 004
[ 0.586930] RSP: 0000:ffffc9000022bd10 EFLAGS: 00010246
[ 0.586930] RAX: 0000000000000000 RBX: ffff888100987400 RCX: ffff8881003e4e19
[ 0.586930] RDX: ffff8881009a5e00 RSI: ffff888100987400 RDI: ffff888100987400
[ 0.586930] RBP: 0000000000000000 R08: ffff8881003e4e18 R09: ffff8881003e4c98
[ 0.586930] R10: 0000000000000000 R11: ffff888100402bc0 R12: ffffffff822ceba0
[ 0.586930] R13: 0000000000000000 R14: ffff888100987400 R15: 0000000000000000
[ 0.586930] FS: 0000000000000000(0000) GS:ffff88853fc00000(0000) knlGS:0000000000000000
[ 0.586930] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 0.586930] CR2: 0000000000000060 CR3: 000000000200a001 CR4: 00000000001706b0
[ 0.586930] Call Trace:
[ 0.586930] <TASK>
[ 0.586930] device_add+0x4c0/0x910
[ 0.586930] __register_one_node+0x97/0x2d0
[ 0.586930] __try_online_node+0x85/0xc0
[ 0.586930] try_online_node+0x25/0x40
[ 0.586930] cpu_up+0x4f/0x100
[ 0.586930] bringup_nonboot_cpus+0x4f/0x60
[ 0.586930] smp_init+0x26/0x79
[ 0.586930] kernel_init_freeable+0x130/0x2f1
[ 0.586930] ? rest_init+0x100/0x100
[ 0.586930] kernel_init+0x17/0x150
[ 0.586930] ? rest_init+0x100/0x100
[ 0.586930] ret_from_fork+0x22/0x30
[ 0.586930] </TASK>
[ 0.586930] Modules linked in:
[ 0.586930] CR2: 0000000000000060
[ 0.586930] ---[ end trace 0000000000000000 ]---
=========

The reason is simple, by the time bringup_nonboot_cpus() gets called,
we did not register the node_subsys bus yet, so we crash when bus_add_device()
tries to dereference bus()->p.

The following shows the order of the calls:

kernel_init_freeable
smp_init
bringup_nonboot_cpus
...
bus_add_device() <- we did not register node_subsys yet
do_basic_setup
do_initcalls
postcore_initcall(register_node_type);
register_node_type
subsys_system_register
subsys_register
bus_register <- register node_subsys bus

Why setting the node online saves us then? Well, simply because
__try_online_node() backs off when the node is online, meaning
we do not end up calling register_one_node() in the first place.

This is subtle, broken and deserves a deep analysis and thought
about how to put this into shape, but for now let us have this
easy fix for the leaking memory issue.

Signed-off-by: Oscar Salvador <[email protected]>
Acked-by: Michal Hocko <[email protected]>
---
arch/x86/mm/numa.c | 33 ++++++++++++++++++++-------------
include/linux/mm.h | 1 -
mm/page_alloc.c | 2 +-
3 files changed, 21 insertions(+), 15 deletions(-)

diff --git a/arch/x86/mm/numa.c b/arch/x86/mm/numa.c
index c6b1213086d6..e8b061557887 100644
--- a/arch/x86/mm/numa.c
+++ b/arch/x86/mm/numa.c
@@ -738,17 +738,6 @@ void __init x86_numa_init(void)
numa_init(dummy_numa_init);
}

-static void __init init_memory_less_node(int nid)
-{
- /* Allocate and initialize node data. Memory-less node is now online.*/
- alloc_node_data(nid);
- free_area_init_memoryless_node(nid);
-
- /*
- * All zonelists will be built later in start_kernel() after per cpu
- * areas are initialized.
- */
-}

/*
* A node may exist which has one or more Generic Initiators but no CPUs and no
@@ -766,9 +755,18 @@ void __init init_gi_nodes(void)
{
int nid;

+ /*
+ * Exclude this node from
+ * bringup_nonboot_cpus
+ * cpu_up
+ * __try_online_node
+ * register_one_node
+ * because node_subsys is not initialized yet.
+ * TODO remove dependency on node_online
+ */
for_each_node_state(nid, N_GENERIC_INITIATOR)
if (!node_online(nid))
- init_memory_less_node(nid);
+ node_set_online(nid);
}

/*
@@ -798,8 +796,17 @@ void __init init_cpu_to_node(void)
if (node == NUMA_NO_NODE)
continue;

+ /*
+ * Exclude this node from
+ * bringup_nonboot_cpus
+ * cpu_up
+ * __try_online_node
+ * register_one_node
+ * because node_subsys is not initialized yet.
+ * TODO remove dependency on node_online
+ */
if (!node_online(node))
- init_memory_less_node(node);
+ node_set_online(node);

numa_set_node(cpu, node);
}
diff --git a/include/linux/mm.h b/include/linux/mm.h
index 213cc569b192..9ff1c4c8449e 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -2453,7 +2453,6 @@ static inline spinlock_t *pud_lock(struct mm_struct *mm, pud_t *pud)
}

extern void __init pagecache_init(void);
-extern void __init free_area_init_memoryless_node(int nid);
extern void free_initmem(void);

/*
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 83da2279be72..967085c1c78a 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -7698,7 +7698,7 @@ static void __init free_area_init_node(int nid)
free_area_init_core(pgdat);
}

-void __init free_area_init_memoryless_node(int nid)
+static void __init free_area_init_memoryless_node(int nid)
{
free_area_init_node(nid);
}
--
2.34.1