This series adds support for the UART hardware on the ARTPEC-8 chip. This
block is already supported by an existing driver so only a small patch to
describe the properties of the variant is required.
Vincent Whitchurch (2):
dt-bindings: serial: samsung: Add ARTPEC-8 UART
tty: serial: samsung: Add ARTPEC-8 support
.../bindings/serial/samsung_uart.yaml | 1 +
drivers/tty/serial/Kconfig | 2 +-
drivers/tty/serial/samsung_tty.c | 38 +++++++++++++++++++
3 files changed, 40 insertions(+), 1 deletion(-)
--
2.34.1