Scalar properties shouldn't have array constraints (minItems, maxItems,
items). These constraints can simply be dropped with any constraints under
'items' moved up a level.
Cc: Agathe Porte <[email protected]>
Cc: Guenter Roeck <[email protected]>
Cc: Jean Delvare <[email protected]>
Cc: Krzysztof Kozlowski <[email protected]>
Cc: Olivier Moysan <[email protected]>
Cc: Arnaud Pouliquen <[email protected]>
Cc: Jonathan Cameron <[email protected]>
Cc: Lars-Peter Clausen <[email protected]>
Cc: Philipp Zabel <[email protected]>
Cc: Mauro Carvalho Chehab <[email protected]>
Cc: Bjorn Andersson <[email protected]>
Cc: Mathieu Poirier <[email protected]>
Cc: Mark Brown <[email protected]>
Cc: Fabrice Gasnier <[email protected]>
Cc: Yunfei Dong <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Rob Herring <[email protected]>
---
Documentation/devicetree/bindings/hwmon/ti,tmp464.yaml | 5 ++---
.../devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml | 4 +---
Documentation/devicetree/bindings/media/coda.yaml | 1 -
.../devicetree/bindings/media/mediatek,vcodec-decoder.yaml | 2 --
.../devicetree/bindings/media/mediatek,vcodec-encoder.yaml | 2 --
.../bindings/media/mediatek,vcodec-subdev-decoder.yaml | 1 -
.../devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml | 4 +---
Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml | 2 --
8 files changed, 4 insertions(+), 17 deletions(-)
diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp464.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp464.yaml
index 801ca9ba7d34..e7493e25a7d2 100644
--- a/Documentation/devicetree/bindings/hwmon/ti,tmp464.yaml
+++ b/Documentation/devicetree/bindings/hwmon/ti,tmp464.yaml
@@ -58,9 +58,8 @@ patternProperties:
The value (two's complement) to be programmed in the channel specific N correction register.
For remote channels only.
$ref: /schemas/types.yaml#/definitions/int32
- items:
- minimum: -128
- maximum: 127
+ minimum: -128
+ maximum: 127
required:
- reg
diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
index 7c260f209687..952bc900d0fa 100644
--- a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
@@ -108,9 +108,7 @@ patternProperties:
- [1-5]: order 1 to 5.
For audio purpose it is recommended to use order 3 to 5.
$ref: /schemas/types.yaml#/definitions/uint32
- items:
- minimum: 0
- maximum: 5
+ maximum: 5
"#io-channel-cells":
const: 1
diff --git a/Documentation/devicetree/bindings/media/coda.yaml b/Documentation/devicetree/bindings/media/coda.yaml
index 36781ee4617f..c9d5adbc8c4a 100644
--- a/Documentation/devicetree/bindings/media/coda.yaml
+++ b/Documentation/devicetree/bindings/media/coda.yaml
@@ -65,7 +65,6 @@ properties:
iram:
$ref: /schemas/types.yaml#/definitions/phandle
description: phandle pointing to the SRAM device node
- maxItems: 1
required:
- compatible
diff --git a/Documentation/devicetree/bindings/media/mediatek,vcodec-decoder.yaml b/Documentation/devicetree/bindings/media/mediatek,vcodec-decoder.yaml
index 9b179bb44dfb..aa55ca65d6ed 100644
--- a/Documentation/devicetree/bindings/media/mediatek,vcodec-decoder.yaml
+++ b/Documentation/devicetree/bindings/media/mediatek,vcodec-decoder.yaml
@@ -63,13 +63,11 @@ properties:
mediatek,vpu:
$ref: /schemas/types.yaml#/definitions/phandle
- maxItems: 1
description:
Describes point to vpu.
mediatek,scp:
$ref: /schemas/types.yaml#/definitions/phandle
- maxItems: 1
description:
Describes point to scp.
diff --git a/Documentation/devicetree/bindings/media/mediatek,vcodec-encoder.yaml b/Documentation/devicetree/bindings/media/mediatek,vcodec-encoder.yaml
index e7b65a91c92c..2746dea3ce79 100644
--- a/Documentation/devicetree/bindings/media/mediatek,vcodec-encoder.yaml
+++ b/Documentation/devicetree/bindings/media/mediatek,vcodec-encoder.yaml
@@ -55,13 +55,11 @@ properties:
mediatek,vpu:
$ref: /schemas/types.yaml#/definitions/phandle
- maxItems: 1
description:
Describes point to vpu.
mediatek,scp:
$ref: /schemas/types.yaml#/definitions/phandle
- maxItems: 1
description:
Describes point to scp.
diff --git a/Documentation/devicetree/bindings/media/mediatek,vcodec-subdev-decoder.yaml b/Documentation/devicetree/bindings/media/mediatek,vcodec-subdev-decoder.yaml
index 7687be0f50aa..c73bf2352aca 100644
--- a/Documentation/devicetree/bindings/media/mediatek,vcodec-subdev-decoder.yaml
+++ b/Documentation/devicetree/bindings/media/mediatek,vcodec-subdev-decoder.yaml
@@ -61,7 +61,6 @@ properties:
mediatek,scp:
$ref: /schemas/types.yaml#/definitions/phandle
- maxItems: 1
description: |
The node of system control processor (SCP), using
the remoteproc & rpmsg framework.
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml
index 2424de733ee4..d99a729d2710 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml
@@ -104,8 +104,7 @@ properties:
qcom,smem-state-names:
$ref: /schemas/types.yaml#/definitions/string
description: The names of the state bits used for SMP2P output
- items:
- - const: stop
+ const: stop
glink-edge:
type: object
@@ -130,7 +129,6 @@ properties:
qcom,remote-pid:
$ref: /schemas/types.yaml#/definitions/uint32
description: ID of the shared memory used by GLINK for communication with WPSS
- maxItems: 1
required:
- interrupts
diff --git a/Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml b/Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml
index b104899205f6..5de710adfa63 100644
--- a/Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml
+++ b/Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml
@@ -124,7 +124,6 @@ properties:
description: |
Override the default TX fifo size. Unit is words. Ignored if 0.
$ref: /schemas/types.yaml#/definitions/uint32
- maxItems: 1
default: 64
renesas,rx-fifo-size:
@@ -132,7 +131,6 @@ properties:
description: |
Override the default RX fifo size. Unit is words. Ignored if 0.
$ref: /schemas/types.yaml#/definitions/uint32
- maxItems: 1
default: 64
required:
--
2.32.0
On Wed, Apr 13, 2022 at 09:01:21AM -0500, Rob Herring wrote:
> Scalar properties shouldn't have array constraints (minItems, maxItems,
> items). These constraints can simply be dropped with any constraints under
> 'items' moved up a level.
>
> Cc: Agathe Porte <[email protected]>
> Cc: Guenter Roeck <[email protected]>
> Cc: Jean Delvare <[email protected]>
> Cc: Krzysztof Kozlowski <[email protected]>
> Cc: Olivier Moysan <[email protected]>
> Cc: Arnaud Pouliquen <[email protected]>
> Cc: Jonathan Cameron <[email protected]>
> Cc: Lars-Peter Clausen <[email protected]>
> Cc: Philipp Zabel <[email protected]>
> Cc: Mauro Carvalho Chehab <[email protected]>
> Cc: Bjorn Andersson <[email protected]>
> Cc: Mathieu Poirier <[email protected]>
> Cc: Mark Brown <[email protected]>
> Cc: Fabrice Gasnier <[email protected]>
> Cc: Yunfei Dong <[email protected]>
> Cc: Geert Uytterhoeven <[email protected]>
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Signed-off-by: Rob Herring <[email protected]>
> ---
> Documentation/devicetree/bindings/hwmon/ti,tmp464.yaml | 5 ++---
Acked-by: Guenter Roeck <[email protected]>
> .../devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml | 4 +---
> Documentation/devicetree/bindings/media/coda.yaml | 1 -
> .../devicetree/bindings/media/mediatek,vcodec-decoder.yaml | 2 --
> .../devicetree/bindings/media/mediatek,vcodec-encoder.yaml | 2 --
> .../bindings/media/mediatek,vcodec-subdev-decoder.yaml | 1 -
> .../devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml | 4 +---
> Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml | 2 --
> 8 files changed, 4 insertions(+), 17 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp464.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp464.yaml
> index 801ca9ba7d34..e7493e25a7d2 100644
> --- a/Documentation/devicetree/bindings/hwmon/ti,tmp464.yaml
> +++ b/Documentation/devicetree/bindings/hwmon/ti,tmp464.yaml
> @@ -58,9 +58,8 @@ patternProperties:
> The value (two's complement) to be programmed in the channel specific N correction register.
> For remote channels only.
> $ref: /schemas/types.yaml#/definitions/int32
> - items:
> - minimum: -128
> - maximum: 127
> + minimum: -128
> + maximum: 127
>
> required:
> - reg
> diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
> index 7c260f209687..952bc900d0fa 100644
> --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
> +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
> @@ -108,9 +108,7 @@ patternProperties:
> - [1-5]: order 1 to 5.
> For audio purpose it is recommended to use order 3 to 5.
> $ref: /schemas/types.yaml#/definitions/uint32
> - items:
> - minimum: 0
> - maximum: 5
> + maximum: 5
>
> "#io-channel-cells":
> const: 1
> diff --git a/Documentation/devicetree/bindings/media/coda.yaml b/Documentation/devicetree/bindings/media/coda.yaml
> index 36781ee4617f..c9d5adbc8c4a 100644
> --- a/Documentation/devicetree/bindings/media/coda.yaml
> +++ b/Documentation/devicetree/bindings/media/coda.yaml
> @@ -65,7 +65,6 @@ properties:
> iram:
> $ref: /schemas/types.yaml#/definitions/phandle
> description: phandle pointing to the SRAM device node
> - maxItems: 1
>
> required:
> - compatible
> diff --git a/Documentation/devicetree/bindings/media/mediatek,vcodec-decoder.yaml b/Documentation/devicetree/bindings/media/mediatek,vcodec-decoder.yaml
> index 9b179bb44dfb..aa55ca65d6ed 100644
> --- a/Documentation/devicetree/bindings/media/mediatek,vcodec-decoder.yaml
> +++ b/Documentation/devicetree/bindings/media/mediatek,vcodec-decoder.yaml
> @@ -63,13 +63,11 @@ properties:
>
> mediatek,vpu:
> $ref: /schemas/types.yaml#/definitions/phandle
> - maxItems: 1
> description:
> Describes point to vpu.
>
> mediatek,scp:
> $ref: /schemas/types.yaml#/definitions/phandle
> - maxItems: 1
> description:
> Describes point to scp.
>
> diff --git a/Documentation/devicetree/bindings/media/mediatek,vcodec-encoder.yaml b/Documentation/devicetree/bindings/media/mediatek,vcodec-encoder.yaml
> index e7b65a91c92c..2746dea3ce79 100644
> --- a/Documentation/devicetree/bindings/media/mediatek,vcodec-encoder.yaml
> +++ b/Documentation/devicetree/bindings/media/mediatek,vcodec-encoder.yaml
> @@ -55,13 +55,11 @@ properties:
>
> mediatek,vpu:
> $ref: /schemas/types.yaml#/definitions/phandle
> - maxItems: 1
> description:
> Describes point to vpu.
>
> mediatek,scp:
> $ref: /schemas/types.yaml#/definitions/phandle
> - maxItems: 1
> description:
> Describes point to scp.
>
> diff --git a/Documentation/devicetree/bindings/media/mediatek,vcodec-subdev-decoder.yaml b/Documentation/devicetree/bindings/media/mediatek,vcodec-subdev-decoder.yaml
> index 7687be0f50aa..c73bf2352aca 100644
> --- a/Documentation/devicetree/bindings/media/mediatek,vcodec-subdev-decoder.yaml
> +++ b/Documentation/devicetree/bindings/media/mediatek,vcodec-subdev-decoder.yaml
> @@ -61,7 +61,6 @@ properties:
>
> mediatek,scp:
> $ref: /schemas/types.yaml#/definitions/phandle
> - maxItems: 1
> description: |
> The node of system control processor (SCP), using
> the remoteproc & rpmsg framework.
> diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml
> index 2424de733ee4..d99a729d2710 100644
> --- a/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml
> +++ b/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml
> @@ -104,8 +104,7 @@ properties:
> qcom,smem-state-names:
> $ref: /schemas/types.yaml#/definitions/string
> description: The names of the state bits used for SMP2P output
> - items:
> - - const: stop
> + const: stop
>
> glink-edge:
> type: object
> @@ -130,7 +129,6 @@ properties:
> qcom,remote-pid:
> $ref: /schemas/types.yaml#/definitions/uint32
> description: ID of the shared memory used by GLINK for communication with WPSS
> - maxItems: 1
>
> required:
> - interrupts
> diff --git a/Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml b/Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml
> index b104899205f6..5de710adfa63 100644
> --- a/Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml
> +++ b/Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml
> @@ -124,7 +124,6 @@ properties:
> description: |
> Override the default TX fifo size. Unit is words. Ignored if 0.
> $ref: /schemas/types.yaml#/definitions/uint32
> - maxItems: 1
> default: 64
>
> renesas,rx-fifo-size:
> @@ -132,7 +131,6 @@ properties:
> description: |
> Override the default RX fifo size. Unit is words. Ignored if 0.
> $ref: /schemas/types.yaml#/definitions/uint32
> - maxItems: 1
> default: 64
>
> required:
On Wed, 13 Apr 2022 09:01:21 -0500
Rob Herring <[email protected]> wrote:
> Scalar properties shouldn't have array constraints (minItems, maxItems,
> items). These constraints can simply be dropped with any constraints under
> 'items' moved up a level.
>
> Cc: Agathe Porte <[email protected]>
> Cc: Guenter Roeck <[email protected]>
> Cc: Jean Delvare <[email protected]>
> Cc: Krzysztof Kozlowski <[email protected]>
> Cc: Olivier Moysan <[email protected]>
> Cc: Arnaud Pouliquen <[email protected]>
> Cc: Jonathan Cameron <[email protected]>
> Cc: Lars-Peter Clausen <[email protected]>
> Cc: Philipp Zabel <[email protected]>
> Cc: Mauro Carvalho Chehab <[email protected]>
> Cc: Bjorn Andersson <[email protected]>
> Cc: Mathieu Poirier <[email protected]>
> Cc: Mark Brown <[email protected]>
> Cc: Fabrice Gasnier <[email protected]>
> Cc: Yunfei Dong <[email protected]>
> Cc: Geert Uytterhoeven <[email protected]>
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Signed-off-by: Rob Herring <[email protected]>
> ---
> Documentation/devicetree/bindings/hwmon/ti,tmp464.yaml | 5 ++---
> .../devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml | 4 +---
Acked-by: Jonathan Cameron <[email protected]>
> Documentation/devicetree/bindings/media/coda.yaml | 1 -
> .../devicetree/bindings/media/mediatek,vcodec-decoder.yaml | 2 --
> .../devicetree/bindings/media/mediatek,vcodec-encoder.yaml | 2 --
> .../bindings/media/mediatek,vcodec-subdev-decoder.yaml | 1 -
> .../devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml | 4 +---
> Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml | 2 --
> 8 files changed, 4 insertions(+), 17 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp464.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp464.yaml
> index 801ca9ba7d34..e7493e25a7d2 100644
> --- a/Documentation/devicetree/bindings/hwmon/ti,tmp464.yaml
> +++ b/Documentation/devicetree/bindings/hwmon/ti,tmp464.yaml
> @@ -58,9 +58,8 @@ patternProperties:
> The value (two's complement) to be programmed in the channel specific N correction register.
> For remote channels only.
> $ref: /schemas/types.yaml#/definitions/int32
> - items:
> - minimum: -128
> - maximum: 127
> + minimum: -128
> + maximum: 127
>
> required:
> - reg
> diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
> index 7c260f209687..952bc900d0fa 100644
> --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
> +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
> @@ -108,9 +108,7 @@ patternProperties:
> - [1-5]: order 1 to 5.
> For audio purpose it is recommended to use order 3 to 5.
> $ref: /schemas/types.yaml#/definitions/uint32
> - items:
> - minimum: 0
> - maximum: 5
> + maximum: 5
>
> "#io-channel-cells":
> const: 1
> diff --git a/Documentation/devicetree/bindings/media/coda.yaml b/Documentation/devicetree/bindings/media/coda.yaml
> index 36781ee4617f..c9d5adbc8c4a 100644
> --- a/Documentation/devicetree/bindings/media/coda.yaml
> +++ b/Documentation/devicetree/bindings/media/coda.yaml
> @@ -65,7 +65,6 @@ properties:
> iram:
> $ref: /schemas/types.yaml#/definitions/phandle
> description: phandle pointing to the SRAM device node
> - maxItems: 1
>
> required:
> - compatible
> diff --git a/Documentation/devicetree/bindings/media/mediatek,vcodec-decoder.yaml b/Documentation/devicetree/bindings/media/mediatek,vcodec-decoder.yaml
> index 9b179bb44dfb..aa55ca65d6ed 100644
> --- a/Documentation/devicetree/bindings/media/mediatek,vcodec-decoder.yaml
> +++ b/Documentation/devicetree/bindings/media/mediatek,vcodec-decoder.yaml
> @@ -63,13 +63,11 @@ properties:
>
> mediatek,vpu:
> $ref: /schemas/types.yaml#/definitions/phandle
> - maxItems: 1
> description:
> Describes point to vpu.
>
> mediatek,scp:
> $ref: /schemas/types.yaml#/definitions/phandle
> - maxItems: 1
> description:
> Describes point to scp.
>
> diff --git a/Documentation/devicetree/bindings/media/mediatek,vcodec-encoder.yaml b/Documentation/devicetree/bindings/media/mediatek,vcodec-encoder.yaml
> index e7b65a91c92c..2746dea3ce79 100644
> --- a/Documentation/devicetree/bindings/media/mediatek,vcodec-encoder.yaml
> +++ b/Documentation/devicetree/bindings/media/mediatek,vcodec-encoder.yaml
> @@ -55,13 +55,11 @@ properties:
>
> mediatek,vpu:
> $ref: /schemas/types.yaml#/definitions/phandle
> - maxItems: 1
> description:
> Describes point to vpu.
>
> mediatek,scp:
> $ref: /schemas/types.yaml#/definitions/phandle
> - maxItems: 1
> description:
> Describes point to scp.
>
> diff --git a/Documentation/devicetree/bindings/media/mediatek,vcodec-subdev-decoder.yaml b/Documentation/devicetree/bindings/media/mediatek,vcodec-subdev-decoder.yaml
> index 7687be0f50aa..c73bf2352aca 100644
> --- a/Documentation/devicetree/bindings/media/mediatek,vcodec-subdev-decoder.yaml
> +++ b/Documentation/devicetree/bindings/media/mediatek,vcodec-subdev-decoder.yaml
> @@ -61,7 +61,6 @@ properties:
>
> mediatek,scp:
> $ref: /schemas/types.yaml#/definitions/phandle
> - maxItems: 1
> description: |
> The node of system control processor (SCP), using
> the remoteproc & rpmsg framework.
> diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml
> index 2424de733ee4..d99a729d2710 100644
> --- a/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml
> +++ b/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml
> @@ -104,8 +104,7 @@ properties:
> qcom,smem-state-names:
> $ref: /schemas/types.yaml#/definitions/string
> description: The names of the state bits used for SMP2P output
> - items:
> - - const: stop
> + const: stop
>
> glink-edge:
> type: object
> @@ -130,7 +129,6 @@ properties:
> qcom,remote-pid:
> $ref: /schemas/types.yaml#/definitions/uint32
> description: ID of the shared memory used by GLINK for communication with WPSS
> - maxItems: 1
>
> required:
> - interrupts
> diff --git a/Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml b/Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml
> index b104899205f6..5de710adfa63 100644
> --- a/Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml
> +++ b/Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml
> @@ -124,7 +124,6 @@ properties:
> description: |
> Override the default TX fifo size. Unit is words. Ignored if 0.
> $ref: /schemas/types.yaml#/definitions/uint32
> - maxItems: 1
> default: 64
>
> renesas,rx-fifo-size:
> @@ -132,7 +131,6 @@ properties:
> description: |
> Override the default RX fifo size. Unit is words. Ignored if 0.
> $ref: /schemas/types.yaml#/definitions/uint32
> - maxItems: 1
> default: 64
>
> required:
On Mi, 2022-04-13 at 09:01 -0500, Rob Herring wrote:
> Scalar properties shouldn't have array constraints (minItems, maxItems,
> items). These constraints can simply be dropped with any constraints under
> 'items' moved up a level.
>
> Cc: Agathe Porte <[email protected]>
> Cc: Guenter Roeck <[email protected]>
> Cc: Jean Delvare <[email protected]>
> Cc: Krzysztof Kozlowski <[email protected]>
> Cc: Olivier Moysan <[email protected]>
> Cc: Arnaud Pouliquen <[email protected]>
> Cc: Jonathan Cameron <[email protected]>
> Cc: Lars-Peter Clausen <[email protected]>
> Cc: Philipp Zabel <[email protected]>
> Cc: Mauro Carvalho Chehab <[email protected]>
> Cc: Bjorn Andersson <[email protected]>
> Cc: Mathieu Poirier <[email protected]>
> Cc: Mark Brown <[email protected]>
> Cc: Fabrice Gasnier <[email protected]>
> Cc: Yunfei Dong <[email protected]>
> Cc: Geert Uytterhoeven <[email protected]>
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Signed-off-by: Rob Herring <[email protected]>
> ---
> Documentation/devicetree/bindings/hwmon/ti,tmp464.yaml | 5 ++---
> .../devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml | 4 +---
> Documentation/devicetree/bindings/media/coda.yaml | 1 -
> .../devicetree/bindings/media/mediatek,vcodec-decoder.yaml | 2 --
> .../devicetree/bindings/media/mediatek,vcodec-encoder.yaml | 2 --
> .../bindings/media/mediatek,vcodec-subdev-decoder.yaml | 1 -
> .../devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml | 4 +---
> Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml | 2 --
> 8 files changed, 4 insertions(+), 17 deletions(-)
>
[...]
> diff --git a/Documentation/devicetree/bindings/media/coda.yaml b/Documentation/devicetree/bindings/media/coda.yaml
> index 36781ee4617f..c9d5adbc8c4a 100644
> --- a/Documentation/devicetree/bindings/media/coda.yaml
> +++ b/Documentation/devicetree/bindings/media/coda.yaml
> @@ -65,7 +65,6 @@ properties:
> iram:
> $ref: /schemas/types.yaml#/definitions/phandle
> description: phandle pointing to the SRAM device node
> - maxItems: 1
Reviewed-by: Philipp Zabel <[email protected]>
regards
Philipp
On Wed, Apr 13, 2022 at 4:01 PM Rob Herring <[email protected]> wrote:
> Scalar properties shouldn't have array constraints (minItems, maxItems,
> items). These constraints can simply be dropped with any constraints under
> 'items' moved up a level.
> Signed-off-by: Rob Herring <[email protected]>
> Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml | 2 --
Reviewed-by: Geert Uytterhoeven <[email protected]>
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
On Wed, Apr 13, 2022 at 09:01:21AM -0500, Rob Herring wrote:
> Scalar properties shouldn't have array constraints (minItems, maxItems,
> items). These constraints can simply be dropped with any constraints under
> 'items' moved up a level.
Acked-by: Mark Brown <[email protected]>
On Wed, 13 Apr 2022 09:01:21 -0500, Rob Herring wrote:
> Scalar properties shouldn't have array constraints (minItems, maxItems,
> items). These constraints can simply be dropped with any constraints under
> 'items' moved up a level.
>
> Cc: Agathe Porte <[email protected]>
> Cc: Guenter Roeck <[email protected]>
> Cc: Jean Delvare <[email protected]>
> Cc: Krzysztof Kozlowski <[email protected]>
> Cc: Olivier Moysan <[email protected]>
> Cc: Arnaud Pouliquen <[email protected]>
> Cc: Jonathan Cameron <[email protected]>
> Cc: Lars-Peter Clausen <[email protected]>
> Cc: Philipp Zabel <[email protected]>
> Cc: Mauro Carvalho Chehab <[email protected]>
> Cc: Bjorn Andersson <[email protected]>
> Cc: Mathieu Poirier <[email protected]>
> Cc: Mark Brown <[email protected]>
> Cc: Fabrice Gasnier <[email protected]>
> Cc: Yunfei Dong <[email protected]>
> Cc: Geert Uytterhoeven <[email protected]>
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Signed-off-by: Rob Herring <[email protected]>
> ---
> Documentation/devicetree/bindings/hwmon/ti,tmp464.yaml | 5 ++---
> .../devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml | 4 +---
> Documentation/devicetree/bindings/media/coda.yaml | 1 -
> .../devicetree/bindings/media/mediatek,vcodec-decoder.yaml | 2 --
> .../devicetree/bindings/media/mediatek,vcodec-encoder.yaml | 2 --
> .../bindings/media/mediatek,vcodec-subdev-decoder.yaml | 1 -
> .../devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml | 4 +---
> Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml | 2 --
> 8 files changed, 4 insertions(+), 17 deletions(-)
>
Applied, thanks!