This is the start of the stable review cycle for the 5.10.110 release.
There are 599 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Thu, 07 Apr 2022 07:01:33 +0000.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.110-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 5.10.110-rc1
Vijay Balakrishna <[email protected]>
arm64: Do not defer reserve_crashkernel() for platforms with no DMA memory zones
Eric W. Biederman <[email protected]>
coredump: Use the vma snapshot in fill_files_note
Eric W. Biederman <[email protected]>
coredump/elf: Pass coredump_params into fill_note_info
Eric W. Biederman <[email protected]>
coredump: Remove the WARN_ON in dump_vma_snapshot
Eric W. Biederman <[email protected]>
coredump: Snapshot the vmas in do_coredump
Hangyu Hua <[email protected]>
can: usb_8dev: usb_8dev_start_xmit(): fix double dev_kfree_skb() in error path
Marc Kleine-Budde <[email protected]>
can: m_can: m_can_tx_handler(): fix use after free of skb
Paolo Bonzini <[email protected]>
KVM: x86/mmu: do compare-and-exchange of gPTE via the user address
Martin Varghese <[email protected]>
openvswitch: Fixed nd target mask field in the flow dump.
Guilherme G. Piccoli <[email protected]>
docs: sysctl/kernel: add missing bit to panic_print
Anton Ivanov <[email protected]>
um: Fix uml_mconsole stop/go
Kuldeep Singh <[email protected]>
ARM: dts: spear13xx: Update SPI dma properties
Kuldeep Singh <[email protected]>
ARM: dts: spear1340: Update serial node properties
Amadeusz Sławiński <[email protected]>
ASoC: topology: Allow TLV control to be either read or write
Zhihao Cheng <[email protected]>
ubi: fastmap: Return error code if memory allocation fails in add_aeb()
Miquel Raynal <[email protected]>
dt-bindings: spi: mxic: The interrupt property is not mandatory
Miquel Raynal <[email protected]>
dt-bindings: mtd: nand-controller: Fix a comment in the examples
Miquel Raynal <[email protected]>
dt-bindings: mtd: nand-controller: Fix the reg property description
Hengqi Chen <[email protected]>
bpf: Fix comment for helper bpf_current_task_under_cgroup()
Namhyung Kim <[email protected]>
bpf: Adjust BPF stack helper functions to accommodate skip > 0
Randy Dunlap <[email protected]>
mm/usercopy: return 1 from hardened_usercopy __setup() handler
Randy Dunlap <[email protected]>
mm/memcontrol: return 1 from cgroup.memory __setup() handler
Randy Dunlap <[email protected]>
ARM: 9187/1: JIVE: fix return value of __setup handler
Randy Dunlap <[email protected]>
mm/mmap: return 1 from stack_guard_gap __setup() handler
Sven Eckelmann <[email protected]>
batman-adv: Check ptr for NULL before reducing its refcnt
Jiasheng Jiang <[email protected]>
ASoC: soc-compress: Change the check for codec_dai
Arınç ÜNAL <[email protected]>
staging: mt7621-dts: fix pinctrl-0 items to be size-1 items on ethernet
Lv Ruyi <[email protected]>
proc: bootconfig: Add null pointer check
Oliver Hartkopp <[email protected]>
can: isotp: restore accidentally removed MSG_PEEK feature
Prashant Malani <[email protected]>
platform/chrome: cros_ec_typec: Check for EC device
Rafael J. Wysocki <[email protected]>
ACPI: CPPC: Avoid out of bounds access when parsing _CPC data
Fangrui Song <[email protected]>
riscv module: remove (NOLOAD)
Pavel Begunkov <[email protected]>
io_uring: fix memory leak of uid in files registration
Arnd Bergmann <[email protected]>
ARM: iop32x: offset IRQ numbers by 1
Baokun Li <[email protected]>
ubi: Fix race condition between ctrl_cdev_ioctl and ubi_cdev_ioctl
Jiaxin Yu <[email protected]>
ASoC: mediatek: mt6358: add missing EXPORT_SYMBOLs
Jonathan Neuschäfer <[email protected]>
pinctrl: nuvoton: npcm7xx: Use %zu printk format for ARRAY_SIZE()
Jonathan Neuschäfer <[email protected]>
pinctrl: nuvoton: npcm7xx: Rename DS() macro to DSTR()
Miaoqian Lin <[email protected]>
watchdog: rti-wdt: Add missing pm_runtime_disable() in probe function
Chen-Yu Tsai <[email protected]>
pinctrl: pinconf-generic: Print arguments for bias-pull-*
Eric Dumazet <[email protected]>
watch_queue: Free the page array when watch_queue is dismantled
Herbert Xu <[email protected]>
crypto: arm/aes-neonbs-cbc - Select generic cbc and aes
Robin Gong <[email protected]>
mailbox: imx: fix wakeup failure from freeze mode
David Howells <[email protected]>
rxrpc: Fix call timer start racing with call destruction
Guangbin Huang <[email protected]>
net: hns3: fix software vlan talbe of vlan 0 inconsistent with hardware
Andrew Price <[email protected]>
gfs2: Make sure FITRIM minlen is rounded up to fs block size
Tom Rix <[email protected]>
rtc: check if __rtc_read_time was successful
Matthew Wilcox (Oracle) <[email protected]>
XArray: Update the LRU list in xas_split()
Tom Rix <[email protected]>
can: mcp251xfd: mcp251xfd_register_get_dev_id(): fix return of error value
Pavel Skripkin <[email protected]>
can: mcba_usb: properly check endpoint type
Hangyu Hua <[email protected]>
can: mcba_usb: mcba_usb_start_xmit(): fix double dev_kfree_skb in error path
Matthew Wilcox (Oracle) <[email protected]>
XArray: Fix xas_create_range() when multi-order entry present
Jason A. Donenfeld <[email protected]>
wireguard: socket: ignore v6 endpoints when ipv6 is disabled
Wang Hai <[email protected]>
wireguard: socket: free skb in send6 when ipv6 is disabled
Jason A. Donenfeld <[email protected]>
wireguard: queueing: use CFI-safe ptr_ring cleanup function
Baokun Li <[email protected]>
ubifs: rename_whiteout: correct old_dir size computing
Zhihao Cheng <[email protected]>
ubifs: Fix to add refcount once page is set private
Zhihao Cheng <[email protected]>
ubifs: Fix read out-of-bounds in ubifs_wbuf_write_nolock()
Zhihao Cheng <[email protected]>
ubifs: setflags: Make dirtied_ino_d 8 bytes aligned
Zhihao Cheng <[email protected]>
ubifs: Add missing iput if do_tmpfile() failed in rename whiteout
Zhihao Cheng <[email protected]>
ubifs: Fix deadlock in concurrent rename whiteout and inode writeback
Zhihao Cheng <[email protected]>
ubifs: rename_whiteout: Fix double free for whiteout_ui->data
Ammar Faizi <[email protected]>
ASoC: SOF: Intel: Fix NULL ptr dereference when ENOMEM
Yi Wang <[email protected]>
KVM: SVM: fix panic on out-of-bounds guest IRQ
Li RongQing <[email protected]>
KVM: x86: fix sending PV IPI
David Matlack <[email protected]>
KVM: Prevent module exit until all VMs are freed
Vitaly Kuznetsov <[email protected]>
KVM: x86: Forbid VMM to set SYNIC/STIMER MSRs when SynIC wasn't activated
Gwendal Grignou <[email protected]>
platform: chrome: Split trace include file
Manish Rangankar <[email protected]>
scsi: qla2xxx: Use correct feature type field during RFF_ID processing
Quinn Tran <[email protected]>
scsi: qla2xxx: Reduce false trigger to login
Quinn Tran <[email protected]>
scsi: qla2xxx: Fix N2N inconsistent PLOGI
Arun Easi <[email protected]>
scsi: qla2xxx: Fix missed DMA unmap for NVMe ls requests
Quinn Tran <[email protected]>
scsi: qla2xxx: Fix hang due to session stuck
Quinn Tran <[email protected]>
scsi: qla2xxx: Fix incorrect reporting of task management failure
Quinn Tran <[email protected]>
scsi: qla2xxx: Fix disk failure to rediscover
Saurav Kashyap <[email protected]>
scsi: qla2xxx: Suppress a kernel complaint in qla_create_qpair()
Joe Carnuccio <[email protected]>
scsi: qla2xxx: Check for firmware dump already collected
Joe Carnuccio <[email protected]>
scsi: qla2xxx: Add devids and conditionals for 28xx
Arun Easi <[email protected]>
scsi: qla2xxx: Fix device reconnect in loop topology
Nilesh Javali <[email protected]>
scsi: qla2xxx: Fix warning for missing error code
Bikash Hazarika <[email protected]>
scsi: qla2xxx: Fix wrong FDMI data for 64G adapter
Quinn Tran <[email protected]>
scsi: qla2xxx: Fix scheduling while atomic
Quinn Tran <[email protected]>
scsi: qla2xxx: Fix stuck session in gpdb
Anders Roxell <[email protected]>
powerpc: Fix build errors with newer binutils
Anders Roxell <[email protected]>
powerpc/lib/sstep: Fix build errors with newer binutils
Anders Roxell <[email protected]>
powerpc/lib/sstep: Fix 'sthcx' instruction
Chen Jingwen <[email protected]>
powerpc/kasan: Fix early region not updated correctly
Sean Christopherson <[email protected]>
KVM: x86/mmu: Check for present SPTE when clearing dirty bit in TDP MMU
Matt Kramer <[email protected]>
ALSA: hda/realtek: Add alc256-samsung-headphone fixup
Mauro Carvalho Chehab <[email protected]>
media: atomisp: fix bad usage at error handling logic
Ulf Hansson <[email protected]>
mmc: host: Return an error when ->enable_sdio_irq() ops is missing
Steven Rostedt (Google) <[email protected]>
tracing: Have TRACE_DEFINE_ENUM affect trace event types as well
Dongliang Mu <[email protected]>
media: hdpvr: initialize dev->worker at hdpvr_register_videodev
Pavel Skripkin <[email protected]>
media: Revert "media: em28xx: add missing em28xx_close_extension"
Zheyu Ma <[email protected]>
video: fbdev: sm712fb: Fix crash in smtcfb_write()
Uwe Kleine-König <[email protected]>
ARM: mmp: Fix failure to remove sram device
Richard Leitner <[email protected]>
ARM: tegra: tamonten: Fix I2C3 pad setting
Arnd Bergmann <[email protected]>
lib/test_lockup: fix kernel pointer check for separate address spaces
Arnd Bergmann <[email protected]>
uaccess: fix type mismatch warnings from access_ok()
Daniel González Cabanelas <[email protected]>
media: cx88-mpeg: clear interrupt status register before streaming video
Shengjiu Wang <[email protected]>
ASoC: soc-core: skip zero num_dai component in searching dai name
Richard Schleich <[email protected]>
ARM: dts: bcm2711: Add the missing L1/L2 cache information
Jing Yao <[email protected]>
video: fbdev: udlfb: replace snprintf in show functions with sysfs_emit
Jing Yao <[email protected]>
video: fbdev: omapfb: panel-tpo-td043mtea1: Use sysfs_emit() instead of snprintf()
Jing Yao <[email protected]>
video: fbdev: omapfb: panel-dsi-cm: Use sysfs_emit() instead of snprintf()
Marcel Ziswiler <[email protected]>
arm64: defconfig: build imx-sdma as a module
Abel Vesa <[email protected]>
ARM: dts: imx7: Use audio_mclk_post_div instead audio_mclk_root_clk
Ard Biesheuvel <[email protected]>
ARM: ftrace: avoid redundant loads or clobbering IP
Tsuchiya Yuto <[email protected]>
media: atomisp: fix dummy_ptr check to avoid duplicate active_bo
Hans de Goede <[email protected]>
media: atomisp_gmin_platform: Add DMI quirk to not turn AXP ELDO2 regulator off on some boards
Charles Keepax <[email protected]>
ASoC: madera: Add dependencies on MFD
Richard Schleich <[email protected]>
ARM: dts: bcm2837: Add the missing L1/L2 cache information
David Heidelberg <[email protected]>
ARM: dts: qcom: fix gic_irq_domain_translate warnings for msm8960
Yang Guang <[email protected]>
video: fbdev: omapfb: acx565akm: replace snprintf with sysfs_emit
George Kennedy <[email protected]>
video: fbdev: cirrusfb: check pixclock to avoid divide by zero
Evgeny Novikov <[email protected]>
video: fbdev: w100fb: Reset global state
Tim Gardner <[email protected]>
video: fbdev: nvidiafb: Use strscpy() to prevent buffer overflow
Ranjani Sridharan <[email protected]>
ASoC: SOF: Intel: hda: Remove link assignment limitation
Peiwei Hu <[email protected]>
media: ir_toy: free before error exiting
Hans Verkuil <[email protected]>
media: staging: media: zoran: fix various V4L2 compliance errors
Corentin Labbe <[email protected]>
media: staging: media: zoran: calculate the right buffer number for zoran_reap_stat_com
Corentin Labbe <[email protected]>
media: staging: media: zoran: move videodev alloc
Dongliang Mu <[email protected]>
ntfs: add sanity check on allocation size
Chao Yu <[email protected]>
f2fs: compress: fix to print raw data size in error path of lz4 decompression
Chuck Lever <[email protected]>
NFSD: Fix nfsd_breaker_owns_lease() return values
Chao Yu <[email protected]>
f2fs: fix to do sanity check on curseg->alloc_type
Theodore Ts'o <[email protected]>
ext4: don't BUG if someone dirty pages without asking ext4 first
Ritesh Harjani <[email protected]>
ext4: fix ext4_mb_mark_bb() with flex_bg with fast_commit
Ritesh Harjani <[email protected]>
ext4: correct cluster len and clusters changed accounting in ext4_mb_mark_bb
Waiman Long <[email protected]>
locking/lockdep: Iterate lock_classes directly when reading lockdep files
Minghao Chi <[email protected]>
spi: tegra20: Use of_device_get_match_data()
Chris Leech <[email protected]>
nvme-tcp: lockdep: annotate in-kernel sockets
John David Anglin <[email protected]>
parisc: Fix handling off probe non-access faults
Dmitry Baryshkov <[email protected]>
PM: core: keep irq flags in device_pm_check_callbacks()
Darren Hart <[email protected]>
ACPI/APEI: Limit printable size of BERT table data
Paolo Valente <[email protected]>
Revert "Revert "block, bfq: honor already-setup queue merges""
Paul Menzel <[email protected]>
lib/raid6/test/Makefile: Use $(pound) instead of \# for Make 4.3
Rafael J. Wysocki <[email protected]>
ACPICA: Avoid walking the ACPI Namespace if it is not there
Zhang Wensheng <[email protected]>
bfq: fix use-after-free in bfq_dispatch_request
Akira Kawata <[email protected]>
fs/binfmt_elf: Fix AT_PHDR for unusual ELF files
Souptick Joarder (HPE) <[email protected]>
irqchip/nvic: Release nvic_base upon failure
Marc Zyngier <[email protected]>
irqchip/qcom-pdc: Fix broken locking
Casey Schaufler <[email protected]>
Fix incorrect type in assignment of ipv6 port for audit
Chaitanya Kulkarni <[email protected]>
loop: use sysfs_emit() in the sysfs xxx show()
Richard Haines <[email protected]>
selinux: allow FIOCLEX and FIONCLEX with policy capability
Christian Göttsche <[email protected]>
selinux: use correct type for context length
Yu Kuai <[email protected]>
block, bfq: don't move oom_bfqq
Marc Zyngier <[email protected]>
pinctrl: npcm: Fix broken references to chip->parent_device
Kees Cook <[email protected]>
gcc-plugins/stackleak: Exactly match strings instead of prefixes
Dave Stevenson <[email protected]>
regulator: rpi-panel: Handle I2C errors/timing to the Atmel
Casey Schaufler <[email protected]>
LSM: general protection fault in legacy_parse_param
Linus Torvalds <[email protected]>
fs: fix fd table size alignment properly
Dan Carpenter <[email protected]>
lib/test: use after free in register_test_dev_kmod()
Linus Torvalds <[email protected]>
fs: fd tables have to be multiples of BITS_PER_LONG
Xiaomeng Tong <[email protected]>
net: dsa: bcm_sf2_cfp: fix an incorrect NULL check on list iterator
Trond Myklebust <[email protected]>
NFSv4/pNFS: Fix another issue with a list iterator pointing to the head
Duoming Zhou <[email protected]>
net/x25: Fix null-ptr-deref caused by x25_disconnect
Tom Rix <[email protected]>
qlcnic: dcb: default to returning -EOPNOTSUPP
Ido Schimmel <[email protected]>
selftests: test_vxlan_under_vrf: Fix broken test case
Florian Fainelli <[email protected]>
net: phy: broadcom: Fix brcm_fet_config_init()
Jian Shen <[email protected]>
net: hns3: fix bug when PF set the duplicate MAC address for VFs
Vladimir Oltean <[email protected]>
net: enetc: report software timestamping via SO_TIMESTAMPING
Juergen Gross <[email protected]>
xen: fix is_xen_pmu()
Maxime Ripard <[email protected]>
clk: Initialize orphan req_rate
Konrad Dybcio <[email protected]>
clk: qcom: gcc-msm8994: Fix gpll4 width
Daniel Thompson <[email protected]>
kdb: Fix the putarea helper function
Olga Kornievskaia <[email protected]>
NFSv4.1: don't retry BIND_CONN_TO_SESSION on session error
Pablo Neira Ayuso <[email protected]>
netfilter: nf_conntrack_tcp: preserve liberal flag in tcp options
Pavel Skripkin <[email protected]>
jfs: fix divide error in dbNextAG
Randy Dunlap <[email protected]>
driver core: dd: fix return value of __setup handler
David Gow <[email protected]>
firmware: google: Properly state IOMEM dependency
Randy Dunlap <[email protected]>
kgdbts: fix return value of __setup handler
Ilpo Järvinen <[email protected]>
serial: 8250: fix XOFF/XON sending when DMA is used
Randy Dunlap <[email protected]>
kgdboc: fix return value of __setup handler
Randy Dunlap <[email protected]>
tty: hvc: fix return value of __setup handler
Miaoqian Lin <[email protected]>
pinctrl/rockchip: Add missing of_node_put() in rockchip_pinctrl_probe
Miaoqian Lin <[email protected]>
pinctrl: nomadik: Add missing of_node_put() in nmk_pinctrl_probe
Chen-Yu Tsai <[email protected]>
pinctrl: mediatek: paris: Skip custom extra pin config dump for virtual GPIOs
Chen-Yu Tsai <[email protected]>
pinctrl: mediatek: paris: Fix pingroup pin config state readback
Chen-Yu Tsai <[email protected]>
pinctrl: mediatek: paris: Fix "argument" argument type for mtk_pinconf_get()
Chen-Yu Tsai <[email protected]>
pinctrl: mediatek: paris: Fix PIN_CONFIG_BIAS_* readback
Miaoqian Lin <[email protected]>
pinctrl: mediatek: Fix missing of_node_put() in mtk_pctrl_init
Arınç ÜNAL <[email protected]>
staging: mt7621-dts: fix GB-PC2 devicetree
Arınç ÜNAL <[email protected]>
staging: mt7621-dts: fix pinctrl properties for ethernet
Arınç ÜNAL <[email protected]>
staging: mt7621-dts: fix formatting
Arınç ÜNAL <[email protected]>
staging: mt7621-dts: fix LEDs and pinctrl on GB-PC1 devicetree
Alexey Khoroshilov <[email protected]>
NFS: remove unneeded check in decode_devicenotify_args()
Miaoqian Lin <[email protected]>
clk: tegra: tegra124-emc: Fix missing put_device() call in emc_ensure_emc_driver
Jonathan Neuschäfer <[email protected]>
clk: clps711x: Terminate clk_div_table with sentinel element
Jonathan Neuschäfer <[email protected]>
clk: loongson1: Terminate clk_div_table with sentinel element
Jonathan Neuschäfer <[email protected]>
clk: actions: Terminate clk_div_table with sentinel element
Dan Williams <[email protected]>
nvdimm/region: Fix default alignment for small regions
Miaoqian Lin <[email protected]>
remoteproc: qcom_q6v5_mss: Fix some leaks in q6v5_alloc_memory_region
Miaoqian Lin <[email protected]>
remoteproc: qcom_wcnss: Add missing of_node_put() in wcnss_alloc_memory_region
Miaoqian Lin <[email protected]>
remoteproc: qcom: Fix missing of_node_put in adsp_alloc_memory_region
Jie Hai <[email protected]>
dmaengine: hisi_dma: fix MSI allocate fail when reload hisi_dma
Taniya Das <[email protected]>
clk: qcom: clk-rcg2: Update the frac table for pixel clock
Taniya Das <[email protected]>
clk: qcom: clk-rcg2: Update logic to calculate D value for RCG
Codrin Ciubotariu <[email protected]>
clk: at91: sama7g5: fix parents of PDMCs' GCLK
Abel Vesa <[email protected]>
clk: imx7d: Remove audio_mclk_root_clk
Randy Dunlap <[email protected]>
dma-debug: fix return value of __setup handlers
Trond Myklebust <[email protected]>
NFS: Return valid errors from nfs2/3_decode_dirent()
Jiasheng Jiang <[email protected]>
habanalabs: Add check for pci_enable_device
Jiasheng Jiang <[email protected]>
iio: adc: Add check for devm_request_threaded_irq
Uwe Kleine-König <[email protected]>
serial: 8250: Fix race condition in RTS-after-send handling
Trond Myklebust <[email protected]>
NFS: Use of mapping_set_error() results in spurious errors
Andy Shevchenko <[email protected]>
serial: 8250_lpss: Balance reference count for PCI DMA device
Andy Shevchenko <[email protected]>
serial: 8250_mid: Balance reference count for PCI DMA device
Liu Ying <[email protected]>
phy: dphy: Correct lpx parameter and its derivatives(ta_{get,go,sure})
Dirk Buchwalder <[email protected]>
clk: qcom: ipq8074: Use floor ops for SDCC1 clock
Geert Uytterhoeven <[email protected]>
pinctrl: renesas: checker: Fix miscalculation of number of states
Geert Uytterhoeven <[email protected]>
pinctrl: renesas: r8a77470: Reduce size for narrow VIN1 channel
Jonathan Cameron <[email protected]>
staging:iio:adc:ad7280a: Fix handing of device address bit reversing.
Hans de Goede <[email protected]>
iio: mma8452: Fix probe failing when an i2c_device_id is used
Robert Marko <[email protected]>
clk: qcom: ipq8074: fix PCI-E clock oops
Libin Yang <[email protected]>
soundwire: intel: fix wrong register name in intel_shim_wake
Luca Weiss <[email protected]>
cpufreq: qcom-cpufreq-nvmem: fix reading of PVS Valid fuse
Christophe JAILLET <[email protected]>
misc: alcor_pci: Fix an error handling path
Christophe JAILLET <[email protected]>
fsi: Aspeed: Fix a potential double free
Yangtao Li <[email protected]>
fsi: aspeed: convert to devm_platform_ioremap_resource
Uwe Kleine-König <[email protected]>
pwm: lpc18xx-sct: Initialize driver data and hardware before pwmchip_add()
Jiri Slaby <[email protected]>
mxser: fix xmit_buf leak in activate when LSR == 0xff
Miaoqian Lin <[email protected]>
mfd: asic3: Add missing iounmap() on error asic3_mfd_probe
Hoang Le <[email protected]>
tipc: fix the timer expires after interval 100ms
Aaron Conole <[email protected]>
openvswitch: always update flow key after nat
Jakub Kicinski <[email protected]>
tcp: ensure PMTU updates are processed during fastopen
Jeremy Linton <[email protected]>
net: bcmgenet: Use stronger register read/writes to assure ordering
Bjorn Helgaas <[email protected]>
PCI: Avoid broken MSI on SB600 USB devices
Hangbin Liu <[email protected]>
selftests/bpf/test_lirc_mode2.sh: Exit with proper code
Peter Rosin <[email protected]>
i2c: mux: demux-pinctrl: do not deactivate a master that is not active
Lucas Tanure <[email protected]>
i2c: meson: Fix wrong speed use from probe
Petr Machata <[email protected]>
af_netlink: Fix shift out of bounds in group mask calculation
Guillaume Nault <[email protected]>
ipv4: Fix route lookups when handling ICMP redirects and PMTU updates
Yake Yang <[email protected]>
Bluetooth: btmtksdio: Fix kernel oops in btmtksdio_interrupt
Niels Dossche <[email protected]>
Bluetooth: call hci_le_conn_failed with hdev lock in hci_le_conn_failed
Jakub Sitnicki <[email protected]>
selftests/bpf: Fix error reporting from sock_fields programs
Hangbin Liu <[email protected]>
bareudp: use ipv6_mod_enabled to check if IPv6 enabled
Oliver Hartkopp <[email protected]>
can: isotp: support MSG_TRUNC flag when reading from socket
Oliver Hartkopp <[email protected]>
can: isotp: return -EADDRNOTAVAIL when reading from unbound socket
Dan Carpenter <[email protected]>
USB: storage: ums-realtek: fix error code in rts51x_read_mem()
Niklas Söderlund <[email protected]>
samples/bpf, xdpsock: Fix race when running for fix duration of time
Wang Yufen <[email protected]>
bpf, sockmap: Fix double uncharge the mem of sk_msg
Wang Yufen <[email protected]>
bpf, sockmap: Fix more uncharged while msg has more_data
Wang Yufen <[email protected]>
bpf, sockmap: Fix memleak in tcp_bpf_sendmsg while sk msg is full
Yongzhi Liu <[email protected]>
RDMA/mlx5: Fix memory leak in error flow for subscribe event routine
Xin Xiong <[email protected]>
mtd: rawnand: atmel: fix refcount issue in atmel_nand_controller_init
Yaliang Wang <[email protected]>
MIPS: pgalloc: fix memory leak caused by pgd_free()
Randy Dunlap <[email protected]>
MIPS: RB532: fix return value of __setup handler
Miaoqian Lin <[email protected]>
mips: cdmm: Fix refcount leak in mips_cdmm_phys_base
Miaoqian Lin <[email protected]>
ath10k: Fix error handling in ath10k_setup_msa_resources
Oliver Hartkopp <[email protected]>
vxcan: enable local echo for sent CAN frames
Hangyu Hua <[email protected]>
powerpc: 8xx: fix a return value error in mpc8xx_pic_init
Jia-Ju Bai <[email protected]>
platform/x86: huawei-wmi: check the return value of device_create_file()
Felix Maurer <[email protected]>
selftests/bpf: Make test_lwt_ip_encap more stable and faster
lic121 <[email protected]>
libbpf: Unmap rings when umem deleted
Jiasheng Jiang <[email protected]>
mfd: mc13xxx: Add check for mc13xxx_irq_request
Jakob Koschel <[email protected]>
powerpc/sysdev: fix incorrect use to determine if list is empty
Randy Dunlap <[email protected]>
mips: DEC: honor CONFIG_MIPS_FP_SUPPORT=n
Robert Hancock <[email protected]>
net: axienet: fix RX ring refill allocation failure handling
Mark Tomlinson <[email protected]>
PCI: Reduce warnings on possible RW1C corruption
Mike Marciniszyn <[email protected]>
IB/hfi1: Allow larger MTU without AIP
Jiasheng Jiang <[email protected]>
power: supply: wm8350-power: Add missing free in free_charger_irq
Jiasheng Jiang <[email protected]>
power: supply: wm8350-power: Handle error for wm8350_register_irq
Robert Hancock <[email protected]>
i2c: xiic: Make bus names unique
Anssi Hannula <[email protected]>
hv_balloon: rate-limit "Unhandled message" warning
Hou Wenlong <[email protected]>
KVM: x86/emulator: Defer not-present segment check in __load_segment_descriptor()
Zhenzhong Duan <[email protected]>
KVM: x86: Fix emulation in writing cr8
Michael Ellerman <[email protected]>
powerpc/Makefile: Don't pass -mcpu=powerpc64 when building 32-bit
Daniel Henrique Barboza <[email protected]>
powerpc/mm/numa: skip NUMA_NO_NODE onlining in parse_numa_properties()
Xu Kuohai <[email protected]>
libbpf: Skip forward declaration when counting duplicated type names
Christophe JAILLET <[email protected]>
gpu: host1x: Fix a memory leak in 'host1x_remove()'
Hou Tao <[email protected]>
bpf, arm64: Feed byte-offset into bpf line info
Hou Tao <[email protected]>
bpf, arm64: Call build_prologue() first in first JIT pass
Nishanth Menon <[email protected]>
drm/bridge: cdns-dsi: Make sure to to create proper aliases for dt
Xiang Chen <[email protected]>
scsi: hisi_sas: Change permission of parameter prot_mask
Hans de Goede <[email protected]>
power: supply: bq24190_charger: Fix bq24190_vbus_is_enabled() wrong false return
Miaoqian Lin <[email protected]>
drm/tegra: Fix reference leak in tegra_dsi_ganged_probe
Zhang Yi <[email protected]>
ext2: correct max file size computing
Randy Dunlap <[email protected]>
TOMOYO: fix __setup handlers return values
Maíra Canal <[email protected]>
drm/amd/display: Remove vupdate_int_entry definition
Aharon Landau <[email protected]>
RDMA/mlx5: Fix the flow of a miss in the allocation of a cache ODP MR
Damien Le Moal <[email protected]>
scsi: pm8001: Fix abort all task initialization
Damien Le Moal <[email protected]>
scsi: pm8001: Fix NCQ NON DATA command completion handling
Damien Le Moal <[email protected]>
scsi: pm8001: Fix NCQ NON DATA command task initialization
Damien Le Moal <[email protected]>
scsi: pm8001: Fix le32 values handling in pm80xx_chip_sata_req()
Damien Le Moal <[email protected]>
scsi: pm8001: Fix le32 values handling in pm80xx_chip_ssp_io_req()
Damien Le Moal <[email protected]>
scsi: pm8001: Fix payload initialization in pm80xx_encrypt_update()
Damien Le Moal <[email protected]>
scsi: pm8001: Fix le32 values handling in pm80xx_set_sas_protocol_timer_config()
Damien Le Moal <[email protected]>
scsi: pm8001: Fix payload initialization in pm80xx_set_thermal_config()
Damien Le Moal <[email protected]>
scsi: pm8001: Fix command initialization in pm8001_chip_ssp_tm_req()
Damien Le Moal <[email protected]>
scsi: pm8001: Fix command initialization in pm80XX_send_read_log()
Aashish Sharma <[email protected]>
dm crypt: fix get_key_size compiler warning if !CONFIG_KEYS
Dmitry Baryshkov <[email protected]>
drm/msm/dpu: fix dp audio condition
Dmitry Baryshkov <[email protected]>
drm/msm/dpu: add DSPP blocks teardown
Kuogee Hsieh <[email protected]>
drm/msm/dp: populate connector of struct dp_panel
Dan Carpenter <[email protected]>
iwlwifi: mvm: Fix an error code in iwl_mvm_up()
Colin Ian King <[email protected]>
iwlwifi: Fix -EIO error code that is never returned
Tong Zhang <[email protected]>
dax: make sure inodes are flushed before destroy cache
Håkon Bugge <[email protected]>
IB/cma: Allow XRC INI QPs to set their local ACK timeout
Roman Li <[email protected]>
drm/amd/display: Add affected crtcs to atomic state for dsc mst unplug
Yiqing Yao <[email protected]>
drm/amd/pm: enable pm sysfs write for one VF mode
Jiasheng Jiang <[email protected]>
iommu/ipmmu-vmsa: Check for error num after setting mask
Dmitry Torokhov <[email protected]>
HID: i2c-hid: fix GET/SET_REPORT for unnumbered reports
Miaoqian Lin <[email protected]>
power: supply: ab8500: Fix memory leak in ab8500_fg_sysfs_init
Neil Armstrong <[email protected]>
drm/bridge: dw-hdmi: use safe format when first in bridge chain
Pali Rohár <[email protected]>
PCI: aardvark: Fix reading PCI_EXP_RTSTA_PME bit on emulated bridge
Christophe Leroy <[email protected]>
livepatch: Fix build failure on 32 bits processors
Thomas Bracht Laumann Jespersen <[email protected]>
scripts/dtc: Call pkg-config POSIXly correct
Tobias Waldekranz <[email protected]>
net: dsa: mv88e6xxx: Enable port policy support on 6097
Lorenzo Bianconi <[email protected]>
mt76: mt7615: check sta_rates pointer in mt7615_sta_rate_tbl_update
Lorenzo Bianconi <[email protected]>
mt76: mt7603: check sta_rates pointer in mt7603_sta_rate_tbl_update
Lorenzo Bianconi <[email protected]>
mt76: mt7915: use proper aid value in mt7915_mcu_sta_basic_tlv
Lorenzo Bianconi <[email protected]>
mt76: mt7915: use proper aid value in mt7915_mcu_wtbl_generic_tlv in sta mode
Athira Rajeev <[email protected]>
powerpc/perf: Don't use perf_hw_context for trace IMC PMU
Fabiano Rosas <[email protected]>
KVM: PPC: Book3S HV: Check return value of kvmppc_radix_init
Maxim Kiselev <[email protected]>
powerpc: dts: t1040rdb: fix ports names for Seville Ethernet switch
Jiasheng Jiang <[email protected]>
ray_cs: Check ioremap return value
Miaoqian Lin <[email protected]>
power: reset: gemini-poweroff: Fix IRQ check in gemini_poweroff_probe
Alexander Lobakin <[email protected]>
i40e: respect metadata on XSK Rx to skb
Alexander Lobakin <[email protected]>
i40e: don't reserve excessive XDP_PACKET_HEADROOM on XSK Rx to skb
Fabiano Rosas <[email protected]>
KVM: PPC: Fix vmx/vsx mixup in mmio emulation
Maor Gottlieb <[email protected]>
RDMA/core: Set MR type in ib_reg_user_mr
Pavel Skripkin <[email protected]>
ath9k_htc: fix uninit value bugs
Tom Rix <[email protected]>
drm/amd/pm: return -ENOTSUPP if there is no get_dpm_ultimate_freq function
Zhou Qingyang <[email protected]>
drm/amd/display: Fix a NULL pointer dereference in amdgpu_dm_connector_add_common_modes()
Zhou Qingyang <[email protected]>
drm/nouveau/acr: Fix undefined behavior in nvkm_acr_hsfw_load_bl()
Shannon Nelson <[email protected]>
ionic: fix type complaint in ionic_dev_cmd_clean()
Maxime Ripard <[email protected]>
drm/edid: Don't clear formats if using deep color
Dario Binacchi <[email protected]>
mtd: rawnand: gpmi: fix controller timings setting
Jiasheng Jiang <[email protected]>
mtd: onenand: Check for error irq
Pavel Skripkin <[email protected]>
Bluetooth: hci_serdev: call init_rwsem() before p->open()
Pavel Skripkin <[email protected]>
udmabuf: validate ubuf->pagecount
Yafang Shao <[email protected]>
libbpf: Fix possible NULL pointer dereference when destroying skeleton
Jiasheng Jiang <[email protected]>
drm/panfrost: Check for error num after setting mask
Wen Gong <[email protected]>
ath10k: fix memory overwrite of the WoWLAN wakeup packet pattern
Jagan Teki <[email protected]>
drm: bridge: adv7511: Fix ADV7535 HPD enablement
Miaoqian Lin <[email protected]>
drm/bridge: nwl-dsi: Fix PM disable depth imbalance in nwl_dsi_probe
Miaoqian Lin <[email protected]>
drm/bridge: Add missing pm_runtime_disable() in __dw_mipi_dsi_probe
Miaoqian Lin <[email protected]>
drm/bridge: Fix free wrong object in sii8620_init_rcp_input_dev
Martin Blumenstingl <[email protected]>
drm/meson: osd_afbcd: Add an exit callback to struct meson_afbcd_ops
Andre Przywara <[email protected]>
ARM: configs: multi_v5_defconfig: re-enable CONFIG_V4L_PLATFORM_DRIVERS
Miaoqian Lin <[email protected]>
ASoC: codecs: wcd934x: Add missing of_node_put() in wcd934x_codec_parse_data
Miaoqian Lin <[email protected]>
ASoC: msm8916-wcd-analog: Fix error handling in pm8916_wcd_analog_spmi_probe
Miaoqian Lin <[email protected]>
ASoC: atmel: Fix error handling in sam9x5_wm8731_driver_probe
Yang Yingliang <[email protected]>
ASoC: atmel: sam9x5_wm8731: use devm_snd_soc_register_card()
Jiasheng Jiang <[email protected]>
mmc: davinci_mmc: Handle error for clk_enable
Miaoqian Lin <[email protected]>
ASoC: msm8916-wcd-digital: Fix missing clk_disable_unprepare() in msm8916_wcd_digital_probe
Wang Wensheng <[email protected]>
ASoC: imx-es8328: Fix error return code in imx_es8328_probe()
Shengjiu Wang <[email protected]>
ASoC: fsl_spdif: Disable TX clock when stop
Miaoqian Lin <[email protected]>
ASoC: mxs: Fix error handling in mxs_sgtl5000_probe
Codrin Ciubotariu <[email protected]>
ASoC: dmaengine: do not use a NULL prepare_slave_config() callback
Miaoqian Lin <[email protected]>
ASoC: SOF: Add missing of_node_put() in imx8m_probe
Miaoqian Lin <[email protected]>
ASoC: rockchip: i2s: Fix missing clk_disable_unprepare() in rockchip_i2s_probe
Yang Yingliang <[email protected]>
ASoC: rockchip: i2s: Use devm_platform_get_and_ioremap_resource()
Hans Verkuil <[email protected]>
ivtv: fix incorrect device_caps for ivtvfb
Jakob Koschel <[email protected]>
media: saa7134: fix incorrect use to determine if list is empty
Yang Yingliang <[email protected]>
media: saa7134: convert list_for_each to entry variant
Miaoqian Lin <[email protected]>
video: fbdev: omapfb: Add missing of_node_put() in dvic_probe_of
Jiasheng Jiang <[email protected]>
ASoC: fsi: Add check for clk_enable
Jiasheng Jiang <[email protected]>
ASoC: wm8350: Handle error for wm8350_register_irq
Miaoqian Lin <[email protected]>
ASoC: atmel: Add missing of_node_put() in at91sam9g20ek_audio_probe
Jiasheng Jiang <[email protected]>
media: vidtv: Check for null return of vzalloc
Dafna Hirschfeld <[email protected]>
media: stk1160: If start stream fails, return buffers with VB2_BUF_STATE_QUEUED
Randy Dunlap <[email protected]>
m68k: coldfire/device.c: only build for MCF_EDMA when h/w macros are defined
Rob Herring <[email protected]>
arm64: dts: rockchip: Fix SDIO regulator supply properties on rk3399-firefly
Takashi Sakamoto <[email protected]>
ALSA: firewire-lib: fix uninitialized flag for AV/C deferred transaction
Jia-Ju Bai <[email protected]>
memory: emif: check the pointer temp in get_device_details()
Jiasheng Jiang <[email protected]>
memory: emif: Add check for setup_interrupts
Jiasheng Jiang <[email protected]>
ASoC: soc-compress: prevent the potentially use of null pointer
Jiasheng Jiang <[email protected]>
ASoC: dwc-i2s: Handle errors for clk_enable
Jiasheng Jiang <[email protected]>
ASoC: atmel_ssc_dai: Handle errors for clk_enable
Jiasheng Jiang <[email protected]>
ASoC: mxs-saif: Handle errors for clk_enable
Randy Dunlap <[email protected]>
printk: fix return value of printk.devkmsg __setup handler
Frank Wunderlich <[email protected]>
arm64: dts: broadcom: Fix sata nodename
Kuldeep Singh <[email protected]>
arm64: dts: ns2: Fix spi-cpol and spi-cpha property
Jiasheng Jiang <[email protected]>
ALSA: spi: Add check for clk_enable()
Jiasheng Jiang <[email protected]>
ASoC: ti: davinci-i2s: Add check for clk_enable()
Jia-Ju Bai <[email protected]>
ASoC: rt5663: check the return value of devm_kzalloc() in rt5663_parse_dp()
Arnd Bergmann <[email protected]>
uaccess: fix nios2 and microblaze get_user_8()
Srinivas Kandagatla <[email protected]>
ASoC: codecs: wcd934x: fix return value of wcd934x_rx_hph_mode_put
Jernej Skrabec <[email protected]>
media: cedrus: h264: Fix neighbour info buffer size
Jernej Skrabec <[email protected]>
media: cedrus: H265: Fix neighbour info buffer size
Dan Carpenter <[email protected]>
media: usb: go7007: s2250-board: fix leak in probe()
Dongliang Mu <[email protected]>
media: em28xx: initialize refcount before kref_get
Tom Rix <[email protected]>
media: video/hdmi: handle short reads of hdmi info frame.
Marek Vasut <[email protected]>
ARM: dts: imx: Add missing LVDS decoder on M53Menlo
Ard Biesheuvel <[email protected]>
ARM: ftrace: ensure that ADR takes the Thumb bit into account
Paul Kocialkowski <[email protected]>
ARM: dts: sun8i: v3s: Move the csi1 block to follow address order
Miaoqian Lin <[email protected]>
soc: ti: wkup_m3_ipc: Fix IRQ check in wkup_m3_ipc_probe
Christophe JAILLET <[email protected]>
firmware: ti_sci: Fix compilation failure when CONFIG_TI_SCI_PROTOCOL is not defined
Maulik Shah <[email protected]>
arm64: dts: qcom: sm8150: Correct TCS configuration for apps rsc
David Heidelberg <[email protected]>
arm64: dts: qcom: sdm845: fix microphone bias properties and values
Daniel Thompson <[email protected]>
soc: qcom: aoss: remove spurious IRQF_ONESHOT flags
Miaoqian Lin <[email protected]>
soc: qcom: ocmem: Fix missing put_device() call in of_get_ocmem
Jiasheng Jiang <[email protected]>
soc: qcom: rpmpd: Check for null return of devm_kcalloc
Pavel Kubelun <[email protected]>
ARM: dts: qcom: ipq4019: fix sleep clock
Marijn Suijten <[email protected]>
firmware: qcom: scm: Remove reassignment to desc following initializer
Dan Carpenter <[email protected]>
video: fbdev: fbcvt.c: fix printing in fb_cvt_print_name()
Dan Carpenter <[email protected]>
video: fbdev: atmel_lcdfb: fix an error code in atmel_lcdfb_probe()
Wang Hai <[email protected]>
video: fbdev: smscufx: Fix null-ptr-deref in ufx_usb_probe()
YueHaibing <[email protected]>
video: fbdev: controlfb: Fix COMPILE_TEST build
Sam Ravnborg <[email protected]>
video: fbdev: controlfb: Fix set but not used warnings
Z. Liu <[email protected]>
video: fbdev: matroxfb: set maxvram of vbG200eW to the same as vbG200 to avoid black screen
Jammy Huang <[email protected]>
media: aspeed: Correct value for h-total-pixels
Chen-Yu Tsai <[email protected]>
media: hantro: Fix overfill bottom register field name
Jiasheng Jiang <[email protected]>
media: meson: vdec: potential dereference of null pointer
Miaoqian Lin <[email protected]>
media: coda: Fix missing put_device() call in coda_get_vdoa_data
Pierre-Louis Bossart <[email protected]>
ASoC: generic: simple-card-utils: remove useless assignment
Robert Hancock <[email protected]>
ASoC: xilinx: xlnx_formatter_pcm: Handle sysclk setting
Ondrej Zary <[email protected]>
media: bttv: fix WARNING regression on tunerless devices
Jiasheng Jiang <[email protected]>
media: mtk-vcodec: potential dereference of null pointer
Chen-Yu Tsai <[email protected]>
media: v4l2-mem2mem: Apply DST_QUEUE_OFF_BASE on MMAP buffers across ioctls
Corentin Labbe <[email protected]>
media: staging: media: zoran: fix usage of vb2_dma_contig_set_max_seg_size
Peng Liu <[email protected]>
kunit: make kunit_test_timeout compatible with comment
Guillaume Tucker <[email protected]>
selftests, x86: fix how check_cc.sh is being invoked
Fengnan Chang <[email protected]>
f2fs: fix compressed file start atomic write may cause data corruption
Fengnan Chang <[email protected]>
f2fs: compress: remove unneeded read when rewrite whole cluster
Filipe Manana <[email protected]>
btrfs: fix unexpected error path when reflinking an inline extent
Chao Yu <[email protected]>
f2fs: fix to avoid potential deadlock
Amir Goldstein <[email protected]>
nfsd: more robust allocation failure handling in nfsd_file_cache_init
Jaegeuk Kim <[email protected]>
f2fs: fix missing free nid in f2fs_handle_failed_inode
Adrian Hunter <[email protected]>
perf/x86/intel/pt: Fix address filter config for 32-bit kernel
Adrian Hunter <[email protected]>
perf/core: Fix address filter parser for multiple filters
Mathieu Desnoyers <[email protected]>
rseq: Remove broken uapi field layout on 32-bit little endian
Eric Dumazet <[email protected]>
rseq: Optimise rseq_get_rseq_cs() and clear_rseq_cs()
Qais Yousef <[email protected]>
sched/core: Export pelt_thermal_tp
Bharata B Rao <[email protected]>
sched/debug: Remove mpol_get/put and task_lock/unlock from sched_show_numa
Chao Yu <[email protected]>
f2fs: fix to enable ATGC correctly via gc_idle sysfs interface
David Howells <[email protected]>
watch_queue: Actually free the watch
David Howells <[email protected]>
watch_queue: Fix NULL dereference in error cleanup
Jens Axboe <[email protected]>
io_uring: terminate manual loop iterator loop correctly for non-vecs
Randy Dunlap <[email protected]>
clocksource: acpi_pm: fix return value of __setup handler
Brandon Wyman <[email protected]>
hwmon: (pmbus) Add Vin unit off handling
Miaoqian Lin <[email protected]>
hwrng: nomadik - Change clk_disable to clk_disable_unprepare
Uwe Kleine-König <[email protected]>
amba: Make the remove callback return void
Uwe Kleine-König <[email protected]>
vfio: platform: simplify device removal
Jianglei Nie <[email protected]>
crypto: ccree - Fix use after free in cc_cipher_exit()
Dāvis Mosāns <[email protected]>
crypto: ccp - ccp_dmaengine_unregister release dma channels
Randy Dunlap <[email protected]>
ACPI: APEI: fix return value of __setup handlers
Guillaume Ranquet <[email protected]>
clocksource/drivers/timer-of: Check return value of of_iomap in timer_of_base_init()
Claudiu Beznea <[email protected]>
clocksource/drivers/timer-microchip-pit64b: Use notrace
Krzysztof Kozlowski <[email protected]>
clocksource/drivers/exynos_mct: Handle DTS with higher number of interrupts
Marek Szyprowski <[email protected]>
clocksource/drivers/exynos_mct: Refactor resources allocation
Drew Fustini <[email protected]>
clocksource/drivers/timer-ti-dm: Fix regression from errata i940 fix
Petr Vorel <[email protected]>
crypto: vmx - add missing dependencies
Corentin Labbe <[email protected]>
crypto: amlogic - call finalize with bh disabled
Corentin Labbe <[email protected]>
crypto: sun8i-ce - call finalize with bh disabled
Corentin Labbe <[email protected]>
crypto: sun8i-ss - call finalize with bh disabled
Claudiu Beznea <[email protected]>
hwrng: atmel - disable trng on failure path
Jiasheng Jiang <[email protected]>
spi: spi-zynqmp-gqspi: Handle error for dma_set_mask
Randy Dunlap <[email protected]>
PM: suspend: fix return value of __setup handler
Randy Dunlap <[email protected]>
PM: hibernate: fix __setup handler error handling
Eric Biggers <[email protected]>
block: don't delete queue kobject before its children
Christoph Hellwig <[email protected]>
nvme: cleanup __nvme_check_ids
Armin Wolf <[email protected]>
hwmon: (sch56xx-common) Replace WDOG_ACTIVE with WDOG_HW_RUNNING
Patrick Rudolph <[email protected]>
hwmon: (pmbus) Add mutex to regulator ops
Andy Shevchenko <[email protected]>
spi: pxa2xx-pci: Balance reference count for PCI DMA device
Gilad Ben-Yossef <[email protected]>
crypto: ccree - don't attempt 0 len DMA mappings
Randy Dunlap <[email protected]>
EVM: fix the evm= __setup handler return value
Richard Guy Briggs <[email protected]>
audit: log AUDIT_TIME_* records only from rules
Corentin Labbe <[email protected]>
crypto: rockchip - ECB does not need IV
Muhammad Usama Anjum <[email protected]>
selftests/x86: Add validity check and allow field splitting
Jianyong Wu <[email protected]>
arm64/mm: avoid fixmap race condition when create pud mapping
Miaoqian Lin <[email protected]>
spi: tegra114: Add missing IRQ check in tegra_spi_probe
Jiasheng Jiang <[email protected]>
thermal: int340x: Check for NULL after calling kmemdup()
Tomas Paukrt <[email protected]>
crypto: mxs-dcp - Fix scatterlist processing
Herbert Xu <[email protected]>
crypto: authenc - Fix sleep in atomic context in decrypt_tail
Corentin Labbe <[email protected]>
crypto: sun8i-ss - really disable hash on A80
Geert Uytterhoeven <[email protected]>
hwrng: cavium - HW_RANDOM_CAVIUM should depend on ARCH_THUNDER
Sunil Goutham <[email protected]>
hwrng: cavium - Check health status while reading random data
Christian Göttsche <[email protected]>
selinux: check return value of sel_make_avc_files
kernel test robot <[email protected]>
regulator: qcom_smd: fix for_each_child.cocci warnings
Marc Zyngier <[email protected]>
PCI: xgene: Revert "PCI: xgene: Fix IB window setup"
Liguang Zhang <[email protected]>
PCI: pciehp: Clear cmd_busy bit in polling mode
Mastan Katragadda <[email protected]>
drm/i915/gem: add missing boundary check in vm_access
Jani Nikula <[email protected]>
drm/i915/opregion: check port number bounds for SWSCI display power state
Hector Martin <[email protected]>
brcmfmac: pcie: Fix crashes due to early IRQs
Hector Martin <[email protected]>
brcmfmac: pcie: Replace brcmf_pcie_copy_mem_todev with memcpy_toio
Hector Martin <[email protected]>
brcmfmac: pcie: Release firmwares in the brcmf_pcie_setup error path
Hector Martin <[email protected]>
brcmfmac: firmware: Allocate space for default boardrev in nvram
Max Filippov <[email protected]>
xtensa: fix xtensa_wsr always writing 0
Max Filippov <[email protected]>
xtensa: fix stop_machine_cpuslocked call in patch_text
Johan Hovold <[email protected]>
media: davinci: vpif: fix unbalanced runtime PM enable
Johan Hovold <[email protected]>
media: davinci: vpif: fix unbalanced runtime PM get
Sean Young <[email protected]>
media: gpio-ir-tx: fix transmit with long spaces on Orange Pi PC
Maciej W. Rozycki <[email protected]>
DEC: Limit PMAX memory probing to R3k systems
Mingzhe Zou <[email protected]>
bcache: fixup multiple threads crash
Eric Biggers <[email protected]>
crypto: rsa-pkcs1pad - fix buffer overread in pkcs1pad_verify_complete()
Eric Biggers <[email protected]>
crypto: rsa-pkcs1pad - restore signature length check
Eric Biggers <[email protected]>
crypto: rsa-pkcs1pad - correctly get hash from source scatterlist
Eric Biggers <[email protected]>
crypto: rsa-pkcs1pad - only allow with rsa
Kees Cook <[email protected]>
exec: Force single empty string when argv is empty
Dirk Müller <[email protected]>
lib/raid6/test: fix multiple definition linking error
Srinivas Pandruvada <[email protected]>
thermal: int340x: Increase bitmap size
Jann Horn <[email protected]>
pstore: Don't use semaphores in always-atomic-context code
Colin Ian King <[email protected]>
carl9170: fix missing bit-wise or operator for tx_params
Jocelyn Falempe <[email protected]>
mgag200 fix memmapsl configuration in GCTL6 register
Krzysztof Kozlowski <[email protected]>
ARM: dts: exynos: add missing HDMI supplies on SMDK5420
Krzysztof Kozlowski <[email protected]>
ARM: dts: exynos: add missing HDMI supplies on SMDK5250
Krzysztof Kozlowski <[email protected]>
ARM: dts: exynos: fix UART3 pins configuration in Exynos5250
Tudor Ambarus <[email protected]>
ARM: dts: at91: sama5d2: Fix PMERRLOC resource size
Michael Schmitz <[email protected]>
video: fbdev: atari: Atari 2 bpp (STe) palette bugfix
Helge Deller <[email protected]>
video: fbdev: sm712fb: Fix crash in smtcfb_read()
Cooper Chiou <[email protected]>
drm/edid: check basic audio support on CEA extension block
Tejun Heo <[email protected]>
block: don't merge across cgroup boundaries if blkcg is enabled
Shin'ichiro Kawasaki <[email protected]>
block: limit request dispatch loop duration
Pekka Pessi <[email protected]>
mailbox: tegra-hsp: Flush whole channel
Duoming Zhou <[email protected]>
drivers: hamradio: 6pack: fix UAF bug caused by mod_timer()
Ye Bin <[email protected]>
ext4: fix fs corruption when tring to remove a non-empty directory with IO error
Ritesh Harjani <[email protected]>
ext4: fix ext4_fc_stats trace point
Jann Horn <[email protected]>
coredump: Also dump first pages of non-executable ELF libraries
Sakari Ailus <[email protected]>
ACPI: properties: Consistently return -ENOENT if there are no more references
Nishanth Menon <[email protected]>
arm64: dts: ti: k3-j7200: Fix gic-v3 compatible regs
Nishanth Menon <[email protected]>
arm64: dts: ti: k3-j721e: Fix gic-v3 compatible regs
Nishanth Menon <[email protected]>
arm64: dts: ti: k3-am65: Fix gic-v3 compatible regs
David Engraf <[email protected]>
arm64: signal: nofpsimd: Do not allocate fp/simd context when not available
Xin Long <[email protected]>
udp: call udp_encap_enable for v6 sockets when enabling encap
Andreas Gruenbacher <[email protected]>
powerpc/kvm: Fix kvm_use_magic_page
Oliver Hartkopp <[email protected]>
can: isotp: sanitize CAN ID checks in isotp_bind()
Lars Ellenberg <[email protected]>
drbd: fix potential silent data corruption
Mikulas Patocka <[email protected]>
dm integrity: set journal entry unused when shrinking device
Kuan-Ying Lee <[email protected]>
mm/kmemleak: reset tag when compare object pointer
Rik van Riel <[email protected]>
mm,hwpoison: unmap poisoned page before invalidation
Charan Teja Kalla <[email protected]>
Revert "mm: madvise: skip unmapped vma holes passed to process_madvise"
Charan Teja Kalla <[email protected]>
mm: madvise: return correct bytes advised with process_madvise
Charan Teja Kalla <[email protected]>
mm: madvise: skip unmapped vma holes passed to process_madvise
Kai-Heng Feng <[email protected]>
ALSA: hda/realtek: Fix audio regression on Mi Notebook Pro 2020
Takashi Iwai <[email protected]>
ALSA: pcm: Fix potential AB/BA lock with buffer_mutex and mmap_lock
Mohan Kumar <[email protected]>
ALSA: hda: Avoid unsol event during RPM suspending
Xiaomeng Tong <[email protected]>
ALSA: cs4236: fix an incorrect NULL check on list iterator
Paulo Alcantara <[email protected]>
cifs: fix NULL ptr dereference in smb2_ioctl_query_info()
Paulo Alcantara <[email protected]>
cifs: prevent bad output lengths in smb2_ioctl_query_info()
José Expósito <[email protected]>
Revert "Input: clear BTN_RIGHT/MIDDLE on buttonpads"
Dmitry Vyukov <[email protected]>
riscv: Increase stack size under KASAN
Nikita Shubin <[email protected]>
riscv: Fix fill_callchain return value
Manish Chopra <[email protected]>
qed: validate and restrict untrusted VFs vlan promisc mode
Manish Chopra <[email protected]>
qed: display VF trust config
Damien Le Moal <[email protected]>
scsi: libsas: Fix sas_ata_qc_issue() handling of NCQ NON DATA commands
Hugh Dickins <[email protected]>
mempolicy: mbind_range() set_policy() after vma_merge()
Rik van Riel <[email protected]>
mm: invalidate hwpoison page cache page in fault path
Alistair Popple <[email protected]>
mm/pages_alloc.c: don't create ZONE_MOVABLE beyond the end of a node
Baokun Li <[email protected]>
jffs2: fix memory leak in jffs2_scan_medium
Baokun Li <[email protected]>
jffs2: fix memory leak in jffs2_do_mount_fs
Baokun Li <[email protected]>
jffs2: fix use-after-free in jffs2_clear_xattr_subsystem
Hangyu Hua <[email protected]>
can: ems_usb: ems_usb_start_xmit(): fix double dev_kfree_skb() in error path
Sean Nyekjaer <[email protected]>
mtd: rawnand: protect access to rawnand devices while in suspend
Miquel Raynal <[email protected]>
spi: mxic: Fix the transmit path
Krzysztof Kozlowski <[email protected]>
pinctrl: samsung: drop pin banks references on error paths
Alistair Delva <[email protected]>
remoteproc: Fix count check in rproc_coredump_write()
Chao Yu <[email protected]>
f2fs: fix to do sanity check on .cp_pack_total_block_count
Juhyung Park <[email protected]>
f2fs: quota: fix loop condition at f2fs_quota_sync()
Chao Yu <[email protected]>
f2fs: fix to unlock page correctly in error path of is_alive()
Dan Carpenter <[email protected]>
NFSD: prevent integer overflow on 32 bit systems
Dan Carpenter <[email protected]>
NFSD: prevent underflow in nfssvc_decode_writeargs()
NeilBrown <[email protected]>
SUNRPC: avoid race between mod_timer() and del_timer_sync()
Gwendal Grignou <[email protected]>
HID: intel-ish-hid: Use dma_alloc_coherent for firmware update
Ang Tien Sung <[email protected]>
firmware: stratix10-svc: add missing callback parameter on RSU
Bagas Sanjaya <[email protected]>
Documentation: update stable tree link
Bagas Sanjaya <[email protected]>
Documentation: add link to stable release candidate tree
Eric Biggers <[email protected]>
KEYS: fix length validation in keyctl_pkey_params_get_2()
Jann Horn <[email protected]>
ptrace: Check PTRACE_O_SUSPEND_SECCOMP permission on PTRACE_SEIZE
Kunihiko Hayashi <[email protected]>
clk: uniphier: Fix fixed-rate initialization
Dan Carpenter <[email protected]>
greybus: svc: fix an error handling bug in gb_svc_hello()
Liam Beguin <[email protected]>
iio: inkern: make a best effort on offset calculation
Liam Beguin <[email protected]>
iio: inkern: apply consumer scale when no channel scale is available
Liam Beguin <[email protected]>
iio: inkern: apply consumer scale on IIO_VAL_INT cases
Liam Beguin <[email protected]>
iio: afe: rescale: use s64 for temporary scale calculations
James Clark <[email protected]>
coresight: Fix TRCCONFIGR.QE sysfs interface
Alexander Usyskin <[email protected]>
mei: avoid iterator usage outside of list_for_each_entry
Alexander Usyskin <[email protected]>
mei: me: add Alder Lake N device id.
Anssi Hannula <[email protected]>
xhci: fix uninitialized string returned by xhci_decode_ctrl_ctx()
Mathias Nyman <[email protected]>
xhci: make xhci_handshake timeout for xhci_reset() adjustable
Henry Lin <[email protected]>
xhci: fix runtime PM imbalance in USB2 resume
Anssi Hannula <[email protected]>
xhci: fix garbage USBSTS being logged in some cases
Alan Stern <[email protected]>
USB: usb-storage: Fix use of bitfields for hardware data in ene_ub6250.c
Xie Yongji <[email protected]>
virtio-blk: Use blk_validate_block_size() to validate block size
Lino Sanfilippo <[email protected]>
tpm: fix reference counting for struct tpm_chip
Robin Murphy <[email protected]>
iommu/iova: Improve 32-bit free space estimate
Waiman Long <[email protected]>
locking/lockdep: Avoid potential access of invalid memory in lock_class
Claudiu Beznea <[email protected]>
net: dsa: microchip: add spi_device_id tables
Haimin Zhang <[email protected]>
af_key: add __GFP_ZERO flag for compose_sadb_supported in function pfkey_register
Linus Walleij <[email protected]>
Input: zinitix - do not report shadow fingers
Biju Das <[email protected]>
spi: Fix erroneous sgs value with min_t()
Bartosz Golaszewski <[email protected]>
Revert "gpio: Revert regression in sysfs-gpio (gpiolib.c)"
Minghao Chi (CGEL ZTE) <[email protected]>
net:mcf8390: Use platform_get_irq() to get the interrupt
Biju Das <[email protected]>
spi: Fix invalid sgs value
Marcelo Roberto Jimenez <[email protected]>
gpio: Revert regression in sysfs-gpio (gpiolib.c)
Zheyu Ma <[email protected]>
ethernet: sun: Free the coherent when failing in probing
Stefano Garzarella <[email protected]>
tools/virtio: fix virtio_test execution
Si-Wei Liu <[email protected]>
vdpa/mlx5: should verify CTRL_VQ feature exists for MQ
Michael S. Tsirkin <[email protected]>
virtio_console: break out of buf poll on remove
Daniel Palmer <[email protected]>
ARM: mstar: Select HAVE_ARM_ARCH_TIMER
Lina Wang <[email protected]>
xfrm: fix tunnel model fragmentation behavior
Lucas Zampieri <[email protected]>
HID: logitech-dj: add new lightspeed receiver id
Yajun Deng <[email protected]>
netdevice: add the case if dev is NULL
Randy Dunlap <[email protected]>
hv: utils: add PTP_1588_CLOCK to Kconfig to fix build
Johan Hovold <[email protected]>
USB: serial: simple: add Nokia phone driver
Eddie James <[email protected]>
USB: serial: pl2303: add IBM device IDs
Halil Pasic <[email protected]>
swiotlb: fix info leak with DMA_FROM_DEVICE
-------------
Diffstat:
Documentation/admin-guide/sysctl/kernel.rst | 1 +
Documentation/core-api/dma-attributes.rst | 8 +
.../devicetree/bindings/mtd/nand-controller.yaml | 4 +-
Documentation/devicetree/bindings/spi/spi-mxic.txt | 4 +-
Documentation/process/stable-kernel-rules.rst | 11 +-
Documentation/sound/hd-audio/models.rst | 4 +
Makefile | 4 +-
arch/arc/kernel/process.c | 2 +-
arch/arm/boot/dts/bcm2711.dtsi | 50 +++++
arch/arm/boot/dts/bcm2837.dtsi | 49 +++++
arch/arm/boot/dts/dra7-l4.dtsi | 5 +-
arch/arm/boot/dts/dra7.dtsi | 8 +-
arch/arm/boot/dts/exynos5250-pinctrl.dtsi | 2 +-
arch/arm/boot/dts/exynos5250-smdk5250.dts | 3 +
arch/arm/boot/dts/exynos5420-smdk5420.dts | 3 +
arch/arm/boot/dts/imx53-m53menlo.dts | 29 ++-
arch/arm/boot/dts/imx7-colibri.dtsi | 4 +-
arch/arm/boot/dts/imx7-mba7.dtsi | 2 +-
arch/arm/boot/dts/imx7d-nitrogen7.dts | 2 +-
arch/arm/boot/dts/imx7d-pico-hobbit.dts | 4 +-
arch/arm/boot/dts/imx7d-pico-pi.dts | 4 +-
arch/arm/boot/dts/imx7d-sdb.dts | 4 +-
arch/arm/boot/dts/imx7s-warp.dts | 4 +-
arch/arm/boot/dts/qcom-ipq4019.dtsi | 3 +-
arch/arm/boot/dts/qcom-msm8960.dtsi | 8 +-
arch/arm/boot/dts/sama5d2.dtsi | 2 +-
arch/arm/boot/dts/spear1340.dtsi | 6 +-
arch/arm/boot/dts/spear13xx.dtsi | 6 +-
arch/arm/boot/dts/sun8i-v3s.dtsi | 22 +--
arch/arm/boot/dts/tegra20-tamonten.dtsi | 6 +-
arch/arm/configs/multi_v5_defconfig | 1 +
arch/arm/crypto/Kconfig | 2 +
arch/arm/kernel/entry-ftrace.S | 53 +++---
arch/arm/kernel/swp_emulate.c | 2 +-
arch/arm/kernel/traps.c | 2 +-
arch/arm/mach-iop32x/include/mach/entry-macro.S | 2 +-
arch/arm/mach-iop32x/include/mach/irqs.h | 2 +-
arch/arm/mach-iop32x/irq.c | 6 +-
arch/arm/mach-iop32x/irqs.h | 60 +++---
arch/arm/mach-mmp/sram.c | 22 ++-
arch/arm/mach-mstar/Kconfig | 1 +
arch/arm/mach-s3c/mach-jive.c | 6 +-
.../arm64/boot/dts/broadcom/northstar2/ns2-svk.dts | 8 +-
arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi | 2 +-
arch/arm64/boot/dts/qcom/sdm845.dtsi | 8 +-
arch/arm64/boot/dts/qcom/sm8150.dtsi | 6 +-
arch/arm64/boot/dts/rockchip/rk3399-firefly.dts | 4 +-
arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 5 +-
arch/arm64/boot/dts/ti/k3-am65.dtsi | 1 +
arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 5 +-
arch/arm64/boot/dts/ti/k3-j7200.dtsi | 1 +
arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 5 +-
arch/arm64/boot/dts/ti/k3-j721e.dtsi | 1 +
arch/arm64/configs/defconfig | 2 +-
arch/arm64/kernel/signal.c | 10 +-
arch/arm64/mm/init.c | 36 +++-
arch/arm64/mm/mmu.c | 41 +++-
arch/arm64/net/bpf_jit_comp.c | 18 +-
arch/csky/kernel/perf_callchain.c | 2 +-
arch/csky/kernel/signal.c | 2 +-
arch/m68k/coldfire/device.c | 6 +-
arch/microblaze/include/asm/uaccess.h | 18 +-
arch/mips/dec/int-handler.S | 6 +-
arch/mips/dec/prom/Makefile | 2 +-
arch/mips/dec/setup.c | 3 +-
arch/mips/include/asm/dec/prom.h | 15 +-
arch/mips/include/asm/pgalloc.h | 6 +
arch/mips/rb532/devices.c | 6 +-
arch/nios2/include/asm/uaccess.h | 26 ++-
arch/nios2/kernel/signal.c | 20 +-
arch/parisc/include/asm/traps.h | 1 +
arch/parisc/kernel/traps.c | 2 +
arch/parisc/mm/fault.c | 89 +++++++++
arch/powerpc/Makefile | 2 +-
arch/powerpc/boot/dts/fsl/t1040rdb-rev-a.dts | 30 +++
arch/powerpc/boot/dts/fsl/t1040rdb.dts | 8 +-
arch/powerpc/include/asm/io.h | 40 +++-
arch/powerpc/include/asm/uaccess.h | 3 +
arch/powerpc/kernel/kvm.c | 2 +-
arch/powerpc/kvm/book3s_hv.c | 5 +-
arch/powerpc/kvm/powerpc.c | 4 +-
arch/powerpc/lib/sstep.c | 12 +-
arch/powerpc/mm/kasan/kasan_init_32.c | 3 +-
arch/powerpc/mm/numa.c | 4 +-
arch/powerpc/perf/imc-pmu.c | 6 +-
arch/powerpc/platforms/8xx/pic.c | 1 +
arch/powerpc/platforms/powernv/rng.c | 6 +-
arch/powerpc/sysdev/fsl_gtm.c | 4 +-
arch/riscv/include/asm/module.lds.h | 6 +-
arch/riscv/include/asm/thread_info.h | 10 +-
arch/riscv/kernel/perf_callchain.c | 6 +-
arch/sparc/kernel/signal_32.c | 2 +-
arch/um/drivers/mconsole_kern.c | 3 +-
arch/x86/events/intel/pt.c | 2 +-
arch/x86/kernel/kvm.c | 2 +-
arch/x86/kvm/emulate.c | 14 +-
arch/x86/kvm/hyperv.c | 9 +-
arch/x86/kvm/lapic.c | 5 +-
arch/x86/kvm/mmu/paging_tmpl.h | 77 ++++----
arch/x86/kvm/mmu/tdp_mmu.c | 3 +
arch/x86/kvm/svm/avic.c | 10 +-
arch/x86/xen/pmu.c | 10 +-
arch/x86/xen/pmu.h | 3 +-
arch/x86/xen/smp_pv.c | 2 +-
arch/xtensa/include/asm/processor.h | 4 +-
arch/xtensa/kernel/jump_label.c | 2 +-
block/bfq-cgroup.c | 6 +
block/bfq-iosched.c | 31 ++-
block/blk-merge.c | 11 ++
block/blk-mq-sched.c | 9 +-
block/blk-sysfs.c | 8 +-
crypto/authenc.c | 2 +-
crypto/rsa-pkcs1pad.c | 11 +-
drivers/acpi/acpica/nswalk.c | 3 +
drivers/acpi/apei/bert.c | 10 +-
drivers/acpi/apei/erst.c | 2 +-
drivers/acpi/apei/hest.c | 2 +-
drivers/acpi/cppc_acpi.c | 5 +
drivers/acpi/property.c | 2 +-
drivers/amba/bus.c | 5 +-
drivers/base/dd.c | 2 +-
drivers/base/power/main.c | 6 +-
drivers/block/drbd/drbd_req.c | 3 +-
drivers/block/loop.c | 10 +-
drivers/block/virtio_blk.c | 12 +-
drivers/bluetooth/btmtksdio.c | 4 +-
drivers/bluetooth/hci_serdev.c | 3 +-
drivers/bus/mips_cdmm.c | 1 +
drivers/char/hw_random/Kconfig | 2 +-
drivers/char/hw_random/atmel-rng.c | 1 +
drivers/char/hw_random/cavium-rng-vf.c | 194 ++++++++++++++++++-
drivers/char/hw_random/cavium-rng.c | 11 +-
drivers/char/hw_random/nomadik-rng.c | 7 +-
drivers/char/tpm/tpm-chip.c | 46 +----
drivers/char/tpm/tpm.h | 2 +
drivers/char/tpm/tpm2-space.c | 65 +++++++
drivers/char/virtio_console.c | 7 +
drivers/clk/actions/owl-s700.c | 1 +
drivers/clk/actions/owl-s900.c | 2 +-
drivers/clk/at91/sama7g5.c | 8 +-
drivers/clk/clk-clps711x.c | 2 +
drivers/clk/clk.c | 13 ++
drivers/clk/imx/clk-imx7d.c | 1 -
drivers/clk/loongson1/clk-loongson1c.c | 1 +
drivers/clk/qcom/clk-rcg2.c | 14 +-
drivers/clk/qcom/gcc-ipq8074.c | 21 +--
drivers/clk/qcom/gcc-msm8994.c | 1 +
drivers/clk/tegra/clk-tegra124-emc.c | 1 +
drivers/clk/uniphier/clk-uniphier-fixed-rate.c | 1 +
drivers/clocksource/acpi_pm.c | 6 +-
drivers/clocksource/exynos_mct.c | 60 +++---
drivers/clocksource/timer-microchip-pit64b.c | 2 +-
drivers/clocksource/timer-of.c | 6 +-
drivers/clocksource/timer-ti-dm-systimer.c | 4 +-
drivers/cpufreq/qcom-cpufreq-nvmem.c | 2 +-
.../crypto/allwinner/sun8i-ce/sun8i-ce-cipher.c | 3 +
drivers/crypto/allwinner/sun8i-ce/sun8i-ce-hash.c | 3 +
.../crypto/allwinner/sun8i-ss/sun8i-ss-cipher.c | 3 +
drivers/crypto/allwinner/sun8i-ss/sun8i-ss-core.c | 2 +
drivers/crypto/allwinner/sun8i-ss/sun8i-ss-hash.c | 3 +
drivers/crypto/amlogic/amlogic-gxl-cipher.c | 2 +
drivers/crypto/ccp/ccp-dmaengine.c | 16 ++
drivers/crypto/ccree/cc_buffer_mgr.c | 7 +
drivers/crypto/ccree/cc_cipher.c | 2 +-
drivers/crypto/mxs-dcp.c | 2 +-
drivers/crypto/rockchip/rk3288_crypto_skcipher.c | 1 -
drivers/crypto/vmx/Kconfig | 4 +
drivers/dax/super.c | 1 +
drivers/dma-buf/udmabuf.c | 4 +
drivers/dma/hisi_dma.c | 2 +-
drivers/dma/pl330.c | 3 +-
drivers/firmware/efi/efi-pstore.c | 2 +-
drivers/firmware/google/Kconfig | 2 +-
drivers/firmware/qcom_scm.c | 6 -
drivers/firmware/stratix10-svc.c | 2 +-
drivers/fsi/fsi-master-aspeed.c | 21 ++-
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 10 +-
.../amd/display/dc/irq/dcn21/irq_service_dcn21.c | 14 --
drivers/gpu/drm/amd/pm/amdgpu_pm.c | 4 +-
drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c | 2 +-
drivers/gpu/drm/bridge/adv7511/adv7511.h | 1 +
drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 29 ++-
drivers/gpu/drm/bridge/cdns-dsi.c | 1 +
drivers/gpu/drm/bridge/nwl-dsi.c | 1 +
drivers/gpu/drm/bridge/sil-sii8620.c | 2 +-
drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 5 +-
drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c | 1 +
drivers/gpu/drm/drm_edid.c | 11 +-
drivers/gpu/drm/i915/display/intel_opregion.c | 15 ++
drivers/gpu/drm/i915/gem/i915_gem_mman.c | 2 +-
drivers/gpu/drm/meson/meson_drv.c | 6 +-
drivers/gpu/drm/meson/meson_osd_afbcd.c | 41 ++--
drivers/gpu/drm/meson/meson_osd_afbcd.h | 1 +
drivers/gpu/drm/mgag200/mgag200_mode.c | 5 +-
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 2 +-
drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c | 8 +
drivers/gpu/drm/msm/dp/dp_display.c | 5 +
drivers/gpu/drm/nouveau/nvkm/subdev/acr/hsfw.c | 9 +-
drivers/gpu/drm/panfrost/panfrost_gpu.c | 5 +-
drivers/gpu/drm/pl111/pl111_drv.c | 4 +-
drivers/gpu/drm/tegra/dsi.c | 4 +-
drivers/gpu/host1x/dev.c | 1 +
drivers/greybus/svc.c | 8 +-
drivers/hid/hid-logitech-dj.c | 1 +
drivers/hid/i2c-hid/i2c-hid-core.c | 32 +++-
drivers/hid/intel-ish-hid/ishtp-fw-loader.c | 29 +--
drivers/hv/Kconfig | 1 +
drivers/hv/hv_balloon.c | 2 +-
drivers/hwmon/pmbus/pmbus.h | 1 +
drivers/hwmon/pmbus/pmbus_core.c | 18 +-
drivers/hwmon/sch56xx-common.c | 2 +-
drivers/hwtracing/coresight/coresight-catu.c | 3 +-
drivers/hwtracing/coresight/coresight-cpu-debug.c | 4 +-
drivers/hwtracing/coresight/coresight-cti-core.c | 4 +-
drivers/hwtracing/coresight/coresight-etb10.c | 4 +-
drivers/hwtracing/coresight/coresight-etm3x-core.c | 4 +-
drivers/hwtracing/coresight/coresight-etm4x-core.c | 4 +-
.../hwtracing/coresight/coresight-etm4x-sysfs.c | 8 +-
drivers/hwtracing/coresight/coresight-funnel.c | 4 +-
drivers/hwtracing/coresight/coresight-replicator.c | 4 +-
drivers/hwtracing/coresight/coresight-stm.c | 4 +-
drivers/hwtracing/coresight/coresight-tmc-core.c | 4 +-
drivers/hwtracing/coresight/coresight-tpiu.c | 4 +-
drivers/i2c/busses/i2c-meson.c | 12 +-
drivers/i2c/busses/i2c-nomadik.c | 4 +-
drivers/i2c/busses/i2c-xiic.c | 3 +-
drivers/i2c/muxes/i2c-demux-pinctrl.c | 5 +-
drivers/iio/accel/mma8452.c | 29 +--
drivers/iio/adc/twl6030-gpadc.c | 2 +
drivers/iio/afe/iio-rescale.c | 8 +-
drivers/iio/inkern.c | 40 +++-
drivers/infiniband/core/cma.c | 2 +-
drivers/infiniband/core/verbs.c | 1 +
drivers/infiniband/hw/hfi1/verbs.c | 3 +-
drivers/infiniband/hw/mlx5/devx.c | 4 +-
drivers/infiniband/hw/mlx5/mr.c | 2 +
drivers/input/input.c | 6 -
drivers/input/serio/ambakmi.c | 3 +-
drivers/input/touchscreen/zinitix.c | 44 ++++-
drivers/iommu/iova.c | 5 +-
drivers/iommu/ipmmu-vmsa.c | 4 +-
drivers/irqchip/irq-nvic.c | 2 +
drivers/irqchip/qcom-pdc.c | 5 +-
drivers/mailbox/imx-mailbox.c | 9 +
drivers/mailbox/tegra-hsp.c | 5 +
drivers/md/bcache/btree.c | 6 +-
drivers/md/bcache/writeback.c | 6 +-
drivers/md/dm-crypt.c | 2 +-
drivers/md/dm-integrity.c | 6 +-
drivers/media/i2c/adv7511-v4l2.c | 2 +-
drivers/media/i2c/adv7604.c | 2 +-
drivers/media/i2c/adv7842.c | 2 +-
drivers/media/pci/bt8xx/bttv-driver.c | 4 +-
drivers/media/pci/cx88/cx88-mpeg.c | 3 +
drivers/media/pci/ivtv/ivtv-driver.h | 1 -
drivers/media/pci/ivtv/ivtv-ioctl.c | 10 +-
drivers/media/pci/ivtv/ivtv-streams.c | 11 +-
drivers/media/pci/saa7134/saa7134-alsa.c | 8 +-
drivers/media/platform/aspeed-video.c | 9 +-
drivers/media/platform/coda/coda-common.c | 1 +
drivers/media/platform/davinci/vpif.c | 12 +-
.../media/platform/mtk-vcodec/mtk_vcodec_fw_vpu.c | 2 +
drivers/media/rc/gpio-ir-tx.c | 28 ++-
drivers/media/rc/ir_toy.c | 2 +-
drivers/media/test-drivers/vidtv/vidtv_s302m.c | 17 +-
drivers/media/usb/em28xx/em28xx-cards.c | 13 +-
drivers/media/usb/go7007/s2250-board.c | 10 +-
drivers/media/usb/hdpvr/hdpvr-video.c | 4 +-
drivers/media/usb/stk1160/stk1160-core.c | 2 +-
drivers/media/usb/stk1160/stk1160-v4l.c | 10 +-
drivers/media/usb/stk1160/stk1160.h | 2 +-
drivers/media/v4l2-core/v4l2-mem2mem.c | 53 ++++--
drivers/memory/emif.c | 8 +-
drivers/memory/pl172.c | 4 +-
drivers/memory/pl353-smc.c | 4 +-
drivers/mfd/asic3.c | 10 +-
drivers/mfd/mc13xxx-core.c | 4 +-
drivers/misc/cardreader/alcor_pci.c | 9 +-
drivers/misc/habanalabs/common/debugfs.c | 2 +
drivers/misc/kgdbts.c | 4 +-
drivers/misc/mei/hw-me-regs.h | 1 +
drivers/misc/mei/interrupt.c | 35 ++--
drivers/misc/mei/pci-me.c | 1 +
drivers/mmc/core/host.c | 15 +-
drivers/mmc/host/davinci_mmc.c | 6 +-
drivers/mmc/host/mmci.c | 4 +-
drivers/mtd/nand/onenand/generic.c | 7 +-
drivers/mtd/nand/raw/atmel/nand-controller.c | 14 +-
drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c | 3 +
drivers/mtd/nand/raw/nand_base.c | 44 ++---
drivers/mtd/ubi/build.c | 9 +-
drivers/mtd/ubi/fastmap.c | 28 ++-
drivers/mtd/ubi/vmt.c | 8 +-
drivers/net/bareudp.c | 25 +--
drivers/net/can/m_can/m_can.c | 5 +-
drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c | 2 +-
drivers/net/can/usb/ems_usb.c | 1 -
drivers/net/can/usb/mcba_usb.c | 27 +--
drivers/net/can/usb/usb_8dev.c | 30 ++-
drivers/net/can/vxcan.c | 2 +-
drivers/net/dsa/bcm_sf2_cfp.c | 6 +-
drivers/net/dsa/microchip/ksz8795_spi.c | 11 ++
drivers/net/dsa/microchip/ksz9477_spi.c | 12 ++
drivers/net/dsa/mv88e6xxx/chip.c | 1 +
drivers/net/ethernet/8390/mcf8390.c | 10 +-
drivers/net/ethernet/broadcom/genet/bcmgenet.c | 4 +-
.../net/ethernet/freescale/enetc/enetc_ethtool.c | 5 +-
.../ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 11 +-
drivers/net/ethernet/intel/i40e/i40e_xsk.c | 16 +-
drivers/net/ethernet/pensando/ionic/ionic_main.c | 6 +-
drivers/net/ethernet/qlogic/qed/qed_sriov.c | 29 ++-
drivers/net/ethernet/qlogic/qed/qed_sriov.h | 1 +
drivers/net/ethernet/qlogic/qlcnic/qlcnic_dcb.h | 10 +-
drivers/net/ethernet/sun/sunhme.c | 6 +-
drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 72 ++++---
drivers/net/hamradio/6pack.c | 4 +-
drivers/net/phy/broadcom.c | 21 +++
drivers/net/wireguard/queueing.c | 3 +-
drivers/net/wireguard/socket.c | 5 +-
drivers/net/wireless/ath/ath10k/snoc.c | 2 +-
drivers/net/wireless/ath/ath10k/wow.c | 7 +-
drivers/net/wireless/ath/ath9k/htc_hst.c | 5 +
drivers/net/wireless/ath/carl9170/main.c | 2 +-
.../broadcom/brcm80211/brcmfmac/firmware.c | 2 +
.../wireless/broadcom/brcm80211/brcmfmac/pcie.c | 66 ++-----
drivers/net/wireless/intel/iwlwifi/dvm/mac80211.c | 2 +-
drivers/net/wireless/intel/iwlwifi/mvm/fw.c | 4 +-
drivers/net/wireless/mediatek/mt76/mt7603/main.c | 3 +
drivers/net/wireless/mediatek/mt76/mt7615/main.c | 3 +
drivers/net/wireless/mediatek/mt76/mt7915/mcu.c | 9 +-
drivers/net/wireless/ray_cs.c | 6 +
drivers/nvdimm/region_devs.c | 3 +
drivers/nvme/host/core.c | 9 +-
drivers/nvme/host/tcp.c | 40 ++++
drivers/pci/access.c | 9 +-
drivers/pci/controller/pci-aardvark.c | 4 +-
drivers/pci/controller/pci-xgene.c | 2 +-
drivers/pci/hotplug/pciehp_hpc.c | 2 +
drivers/pci/quirks.c | 12 ++
drivers/phy/phy-core-mipi-dphy.c | 4 +-
drivers/pinctrl/mediatek/pinctrl-mtk-common.c | 2 +
drivers/pinctrl/mediatek/pinctrl-paris.c | 30 ++-
drivers/pinctrl/nomadik/pinctrl-nomadik.c | 4 +-
drivers/pinctrl/nuvoton/pinctrl-npcm7xx.c | 185 +++++++++---------
drivers/pinctrl/pinconf-generic.c | 6 +-
drivers/pinctrl/pinctrl-rockchip.c | 2 +
drivers/pinctrl/renesas/core.c | 5 +-
drivers/pinctrl/renesas/pfc-r8a77470.c | 4 +-
drivers/pinctrl/samsung/pinctrl-samsung.c | 30 ++-
drivers/platform/chrome/Makefile | 3 +-
drivers/platform/chrome/cros_ec_sensorhub_ring.c | 3 +-
drivers/platform/chrome/cros_ec_sensorhub_trace.h | 123 ++++++++++++
drivers/platform/chrome/cros_ec_trace.h | 95 ----------
drivers/platform/chrome/cros_ec_typec.c | 6 +
drivers/platform/x86/huawei-wmi.c | 13 +-
drivers/power/reset/gemini-poweroff.c | 4 +-
drivers/power/supply/ab8500_fg.c | 4 +-
drivers/power/supply/bq24190_charger.c | 7 +-
drivers/power/supply/wm8350_power.c | 97 ++++++++--
drivers/pwm/pwm-lpc18xx-sct.c | 20 +-
drivers/regulator/qcom_smd-regulator.c | 4 +-
drivers/regulator/rpi-panel-attiny-regulator.c | 56 +++++-
drivers/remoteproc/qcom_q6v5_adsp.c | 1 +
drivers/remoteproc/qcom_q6v5_mss.c | 11 +-
drivers/remoteproc/qcom_wcnss.c | 1 +
drivers/remoteproc/remoteproc_debugfs.c | 2 +-
drivers/rtc/interface.c | 7 +-
drivers/rtc/rtc-pl030.c | 4 +-
drivers/rtc/rtc-pl031.c | 4 +-
drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 2 +-
drivers/scsi/libsas/sas_ata.c | 2 +-
drivers/scsi/pm8001/pm8001_hwi.c | 23 ++-
drivers/scsi/pm8001/pm80xx_hwi.c | 209 +++++++++++----------
drivers/scsi/qla2xxx/qla_attr.c | 7 +-
drivers/scsi/qla2xxx/qla_def.h | 10 +-
drivers/scsi/qla2xxx/qla_gs.c | 5 +-
drivers/scsi/qla2xxx/qla_init.c | 73 +++++--
drivers/scsi/qla2xxx/qla_iocb.c | 8 +-
drivers/scsi/qla2xxx/qla_isr.c | 1 +
drivers/scsi/qla2xxx/qla_mbx.c | 14 +-
drivers/scsi/qla2xxx/qla_nvme.c | 22 +++
drivers/scsi/qla2xxx/qla_os.c | 8 +-
drivers/scsi/qla2xxx/qla_sup.c | 4 +-
drivers/scsi/qla2xxx/qla_target.c | 4 +-
drivers/soc/qcom/ocmem.c | 1 +
drivers/soc/qcom/qcom_aoss.c | 2 +-
drivers/soc/qcom/rpmpd.c | 3 +
drivers/soc/ti/wkup_m3_ipc.c | 4 +-
drivers/soundwire/intel.c | 4 +-
drivers/spi/spi-mxic.c | 28 ++-
drivers/spi/spi-pl022.c | 5 +-
drivers/spi/spi-pxa2xx-pci.c | 17 +-
drivers/spi/spi-tegra114.c | 4 +
drivers/spi/spi-tegra20-slink.c | 8 +-
drivers/spi/spi-zynqmp-gqspi.c | 5 +-
drivers/spi/spi.c | 4 +-
drivers/staging/iio/adc/ad7280a.c | 4 +-
drivers/staging/media/atomisp/pci/atomisp_acc.c | 28 ++-
.../media/atomisp/pci/atomisp_gmin_platform.c | 18 ++
drivers/staging/media/atomisp/pci/hmm/hmm.c | 7 +-
drivers/staging/media/hantro/hantro_h1_jpeg_enc.c | 2 +-
drivers/staging/media/hantro/hantro_h1_regs.h | 2 +-
drivers/staging/media/meson/vdec/esparser.c | 7 +-
drivers/staging/media/meson/vdec/vdec_helpers.c | 8 +-
drivers/staging/media/meson/vdec/vdec_helpers.h | 4 +-
drivers/staging/media/sunxi/cedrus/cedrus_h264.c | 2 +-
drivers/staging/media/sunxi/cedrus/cedrus_h265.c | 2 +-
drivers/staging/media/zoran/zoran.h | 2 +-
drivers/staging/media/zoran/zoran_card.c | 86 +++++----
drivers/staging/media/zoran/zoran_device.c | 7 +-
drivers/staging/media/zoran/zoran_driver.c | 18 +-
drivers/staging/mt7621-dts/gbpc1.dts | 40 ++--
drivers/staging/mt7621-dts/gbpc2.dts | 116 +++++++++++-
drivers/staging/mt7621-dts/mt7621.dtsi | 26 +--
.../intel/int340x_thermal/int3400_thermal.c | 7 +-
drivers/tty/hvc/hvc_iucv.c | 4 +-
drivers/tty/mxser.c | 15 +-
drivers/tty/serial/8250/8250_dma.c | 11 +-
drivers/tty/serial/8250/8250_lpss.c | 28 ++-
drivers/tty/serial/8250/8250_mid.c | 19 +-
drivers/tty/serial/8250/8250_port.c | 16 +-
drivers/tty/serial/amba-pl010.c | 4 +-
drivers/tty/serial/amba-pl011.c | 3 +-
drivers/tty/serial/kgdboc.c | 6 +-
drivers/tty/serial/serial_core.c | 14 ++
drivers/usb/host/xhci-hub.c | 5 +-
drivers/usb/host/xhci-mem.c | 2 +-
drivers/usb/host/xhci.c | 20 +-
drivers/usb/host/xhci.h | 14 +-
drivers/usb/serial/Kconfig | 1 +
drivers/usb/serial/pl2303.c | 1 +
drivers/usb/serial/pl2303.h | 3 +
drivers/usb/serial/usb-serial-simple.c | 7 +
drivers/usb/storage/ene_ub6250.c | 155 ++++++++-------
drivers/usb/storage/realtek_cr.c | 2 +-
drivers/vdpa/mlx5/net/mlx5_vnet.c | 18 +-
drivers/vfio/platform/vfio_amba.c | 15 +-
drivers/video/fbdev/amba-clcd.c | 4 +-
drivers/video/fbdev/atafb.c | 12 +-
drivers/video/fbdev/atmel_lcdfb.c | 11 +-
drivers/video/fbdev/cirrusfb.c | 16 +-
drivers/video/fbdev/controlfb.c | 6 +-
drivers/video/fbdev/core/fbcvt.c | 53 +++---
drivers/video/fbdev/matrox/matroxfb_base.c | 2 +-
drivers/video/fbdev/nvidia/nv_i2c.c | 2 +-
.../fbdev/omap2/omapfb/displays/connector-dvi.c | 1 +
.../fbdev/omap2/omapfb/displays/panel-dsi-cm.c | 8 +-
.../omap2/omapfb/displays/panel-sony-acx565akm.c | 2 +-
.../omap2/omapfb/displays/panel-tpo-td043mtea1.c | 4 +-
drivers/video/fbdev/sm712fb.c | 46 ++---
drivers/video/fbdev/smscufx.c | 3 +-
drivers/video/fbdev/udlfb.c | 8 +-
drivers/video/fbdev/w100fb.c | 15 +-
drivers/watchdog/rti_wdt.c | 1 +
drivers/watchdog/sp805_wdt.c | 4 +-
fs/binfmt_elf.c | 84 +++++----
fs/binfmt_elf_fdpic.c | 18 +-
fs/btrfs/reflink.c | 7 +-
fs/cifs/smb2ops.c | 130 +++++++------
fs/coredump.c | 86 +++++++--
fs/exec.c | 26 ++-
fs/ext2/super.c | 6 +-
fs/ext4/inline.c | 9 +-
fs/ext4/inode.c | 25 +++
fs/ext4/mballoc.c | 126 ++++++++-----
fs/ext4/namei.c | 10 +-
fs/f2fs/checkpoint.c | 8 +-
fs/f2fs/compress.c | 5 +-
fs/f2fs/data.c | 9 +-
fs/f2fs/file.c | 5 +-
fs/f2fs/gc.c | 4 +-
fs/f2fs/inode.c | 1 +
fs/f2fs/node.c | 6 +-
fs/f2fs/segment.c | 7 +
fs/f2fs/super.c | 6 +-
fs/f2fs/sysfs.c | 2 +-
fs/file.c | 31 ++-
fs/gfs2/rgrp.c | 3 +-
fs/io_uring.c | 7 +-
fs/jffs2/build.c | 4 +-
fs/jffs2/fs.c | 2 +-
fs/jffs2/scan.c | 6 +-
fs/jfs/jfs_dmap.c | 7 +
fs/nfs/callback_proc.c | 27 +--
fs/nfs/callback_xdr.c | 4 -
fs/nfs/nfs2xdr.c | 2 +-
fs/nfs/nfs3xdr.c | 21 +--
fs/nfs/nfs4proc.c | 1 +
fs/nfs/pnfs.c | 11 ++
fs/nfs/pnfs.h | 2 +
fs/nfs/write.c | 5 +-
fs/nfsd/filecache.c | 6 +-
fs/nfsd/nfs4state.c | 12 +-
fs/nfsd/nfsproc.c | 2 +-
fs/nfsd/xdr.h | 2 +-
fs/ntfs/inode.c | 4 +
fs/proc/bootconfig.c | 2 +
fs/pstore/platform.c | 38 ++--
fs/ubifs/dir.c | 32 ++--
fs/ubifs/file.c | 14 +-
fs/ubifs/io.c | 34 +++-
fs/ubifs/ioctl.c | 2 +-
include/linux/amba/bus.h | 2 +-
include/linux/binfmts.h | 3 +
include/linux/blk-cgroup.h | 17 ++
include/linux/coredump.h | 5 +-
include/linux/dma-mapping.h | 8 +
include/linux/mtd/rawnand.h | 2 +
include/linux/netdevice.h | 6 +-
include/linux/pci.h | 1 +
include/linux/pstore.h | 6 +-
include/linux/serial_core.h | 2 +
include/linux/soc/ti/ti_sci_protocol.h | 2 +-
include/linux/sunrpc/xdr.h | 2 +
include/net/udp.h | 1 +
include/net/udp_tunnel.h | 3 +-
include/sound/pcm.h | 1 +
include/trace/events/ext4.h | 78 +++++---
include/trace/events/rxrpc.h | 8 +-
include/uapi/linux/bpf.h | 12 +-
include/uapi/linux/rseq.h | 20 +-
kernel/audit.h | 4 +
kernel/auditsc.c | 87 +++++++--
kernel/bpf/stackmap.c | 56 +++---
kernel/debug/kdb/kdb_support.c | 2 +-
kernel/dma/debug.c | 4 +-
kernel/dma/swiotlb.c | 3 +-
kernel/events/core.c | 3 +
kernel/livepatch/core.c | 4 +-
kernel/locking/lockdep.c | 38 ++--
kernel/locking/lockdep_internals.h | 6 +-
kernel/locking/lockdep_proc.c | 51 ++++-
kernel/power/hibernate.c | 2 +-
kernel/power/suspend_test.c | 8 +-
kernel/printk/printk.c | 6 +-
kernel/ptrace.c | 47 +++--
kernel/rseq.c | 13 +-
kernel/sched/core.c | 1 +
kernel/sched/debug.c | 10 -
kernel/trace/trace_events.c | 28 +++
kernel/watch_queue.c | 4 +-
lib/kunit/try-catch.c | 2 +-
lib/raid6/test/Makefile | 4 +-
lib/raid6/test/test.c | 1 -
lib/test_kmod.c | 1 +
lib/test_lockup.c | 11 +-
lib/test_xarray.c | 22 +++
lib/xarray.c | 4 +
mm/kmemleak.c | 9 +-
mm/madvise.c | 3 +-
mm/memcontrol.c | 2 +-
mm/memory.c | 17 +-
mm/mempolicy.c | 8 +-
mm/mmap.c | 2 +-
mm/page_alloc.c | 9 +-
mm/usercopy.c | 5 +-
net/batman-adv/bridge_loop_avoidance.c | 6 +
net/batman-adv/distributed-arp-table.c | 3 +
net/batman-adv/gateway_client.c | 12 +-
net/batman-adv/gateway_client.h | 16 +-
net/batman-adv/hard-interface.h | 3 +
net/batman-adv/network-coding.c | 6 +
net/batman-adv/originator.c | 72 +------
net/batman-adv/originator.h | 96 +++++++++-
net/batman-adv/soft-interface.c | 15 +-
net/batman-adv/soft-interface.h | 16 +-
net/batman-adv/tp_meter.c | 3 +
net/batman-adv/translation-table.c | 22 +--
net/batman-adv/translation-table.h | 18 +-
net/batman-adv/tvlv.c | 6 +
net/bluetooth/hci_conn.c | 2 +
net/can/isotp.c | 69 ++++---
net/core/skmsg.c | 17 +-
net/ipv4/route.c | 18 +-
net/ipv4/tcp_bpf.c | 14 +-
net/ipv4/tcp_output.c | 5 +-
net/ipv4/udp.c | 6 +
net/ipv6/udp.c | 4 +-
net/ipv6/xfrm6_output.c | 16 ++
net/key/af_key.c | 2 +-
net/netfilter/nf_conntrack_proto_tcp.c | 17 +-
net/netlink/af_netlink.c | 2 +
net/openvswitch/conntrack.c | 118 ++++++------
net/openvswitch/flow_netlink.c | 4 +-
net/rxrpc/ar-internal.h | 15 +-
net/rxrpc/call_event.c | 2 +-
net/rxrpc/call_object.c | 40 +++-
net/sunrpc/xprt.c | 7 +
net/tipc/socket.c | 3 +-
net/x25/af_x25.c | 11 +-
net/xfrm/xfrm_interface.c | 5 +-
samples/bpf/xdpsock_user.c | 5 +-
scripts/dtc/Makefile | 2 +-
scripts/gcc-plugins/stackleak_plugin.c | 25 ++-
security/integrity/evm/evm_main.c | 2 +-
security/keys/keyctl_pkey.c | 14 +-
security/security.c | 17 +-
security/selinux/hooks.c | 11 +-
security/selinux/include/policycap.h | 1 +
security/selinux/include/policycap_names.h | 3 +-
security/selinux/include/security.h | 7 +
security/selinux/selinuxfs.c | 2 +
security/selinux/xfrm.c | 2 +-
security/smack/smack_lsm.c | 2 +-
security/tomoyo/load_policy.c | 4 +-
sound/arm/aaci.c | 4 +-
sound/core/pcm.c | 1 +
sound/core/pcm_lib.c | 9 +-
sound/core/pcm_native.c | 39 +++-
sound/firewire/fcp.c | 4 +-
sound/isa/cs423x/cs4236.c | 8 +-
sound/pci/hda/patch_hdmi.c | 8 +-
sound/pci/hda/patch_realtek.c | 15 +-
sound/soc/atmel/atmel_ssc_dai.c | 5 +-
sound/soc/atmel/sam9g20_wm8731.c | 1 +
sound/soc/atmel/sam9x5_wm8731.c | 16 +-
sound/soc/codecs/Kconfig | 5 +
sound/soc/codecs/msm8916-wcd-analog.c | 22 ++-
sound/soc/codecs/msm8916-wcd-digital.c | 5 +-
sound/soc/codecs/mt6358.c | 4 +
sound/soc/codecs/rt5663.c | 2 +
sound/soc/codecs/wcd934x.c | 6 +-
sound/soc/codecs/wm8350.c | 28 ++-
sound/soc/dwc/dwc-i2s.c | 17 +-
sound/soc/fsl/fsl_spdif.c | 2 +
sound/soc/fsl/imx-es8328.c | 1 +
sound/soc/generic/simple-card-utils.c | 2 +-
sound/soc/mxs/mxs-saif.c | 5 +-
sound/soc/mxs/mxs-sgtl5000.c | 3 +
sound/soc/rockchip/rockchip_i2s.c | 18 +-
sound/soc/sh/fsi.c | 19 +-
sound/soc/soc-compress.c | 5 +
sound/soc/soc-core.c | 2 +-
sound/soc/soc-generic-dmaengine-pcm.c | 6 +-
sound/soc/soc-topology.c | 3 +-
sound/soc/sof/imx/imx8m.c | 1 +
sound/soc/sof/intel/hda-dai.c | 13 ++
sound/soc/sof/intel/hda-loader.c | 11 +-
sound/soc/ti/davinci-i2s.c | 5 +-
sound/soc/xilinx/xlnx_formatter_pcm.c | 25 +++
sound/spi/at73c213.c | 27 ++-
tools/include/uapi/linux/bpf.h | 4 +-
tools/lib/bpf/btf_dump.c | 5 +
tools/lib/bpf/libbpf.c | 3 +
tools/lib/bpf/xsk.c | 11 ++
.../testing/selftests/bpf/progs/test_sock_fields.c | 2 +-
tools/testing/selftests/bpf/test_lirc_mode2.sh | 5 +-
tools/testing/selftests/bpf/test_lwt_ip_encap.sh | 10 +-
.../testing/selftests/net/test_vxlan_under_vrf.sh | 8 +-
tools/testing/selftests/vm/Makefile | 6 +-
tools/testing/selftests/x86/Makefile | 6 +-
tools/testing/selftests/x86/check_cc.sh | 2 +-
tools/virtio/virtio_test.c | 1 +
virt/kvm/kvm_main.c | 13 ++
654 files changed, 5424 insertions(+), 2742 deletions(-)
From: Kees Cook <[email protected]>
commit dcd46d897adb70d63e025f175a00a89797d31a43 upstream.
Quoting[1] Ariadne Conill:
"In several other operating systems, it is a hard requirement that the
second argument to execve(2) be the name of a program, thus prohibiting
a scenario where argc < 1. POSIX 2017 also recommends this behaviour,
but it is not an explicit requirement[2]:
The argument arg0 should point to a filename string that is
associated with the process being started by one of the exec
functions.
...
Interestingly, Michael Kerrisk opened an issue about this in 2008[3],
but there was no consensus to support fixing this issue then.
Hopefully now that CVE-2021-4034 shows practical exploitative use[4]
of this bug in a shellcode, we can reconsider.
This issue is being tracked in the KSPP issue tracker[5]."
While the initial code searches[6][7] turned up what appeared to be
mostly corner case tests, trying to that just reject argv == NULL
(or an immediately terminated pointer list) quickly started tripping[8]
existing userspace programs.
The next best approach is forcing a single empty string into argv and
adjusting argc to match. The number of programs depending on argc == 0
seems a smaller set than those calling execve with a NULL argv.
Account for the additional stack space in bprm_stack_limits(). Inject an
empty string when argc == 0 (and set argc = 1). Warn about the case so
userspace has some notice about the change:
process './argc0' launched './argc0' with NULL argv: empty string added
Additionally WARN() and reject NULL argv usage for kernel threads.
[1] https://lore.kernel.org/lkml/[email protected]/
[2] https://pubs.opengroup.org/onlinepubs/9699919799/functions/exec.html
[3] https://bugzilla.kernel.org/show_bug.cgi?id=8408
[4] https://www.qualys.com/2022/01/25/cve-2021-4034/pwnkit.txt
[5] https://github.com/KSPP/linux/issues/176
[6] https://codesearch.debian.net/search?q=execve%5C+*%5C%28%5B%5E%2C%5D%2B%2C+*NULL&literal=0
[7] https://codesearch.debian.net/search?q=execlp%3F%5Cs*%5C%28%5B%5E%2C%5D%2B%2C%5Cs*NULL&literal=0
[8] https://lore.kernel.org/lkml/20220131144352.GE16385@xsang-OptiPlex-9020/
Reported-by: Ariadne Conill <[email protected]>
Reported-by: Michael Kerrisk <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Christian Brauner <[email protected]>
Cc: Rich Felker <[email protected]>
Cc: Eric Biederman <[email protected]>
Cc: Alexander Viro <[email protected]>
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Kees Cook <[email protected]>
Acked-by: Christian Brauner <[email protected]>
Acked-by: Ariadne Conill <[email protected]>
Acked-by: Andy Lutomirski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/exec.c | 26 +++++++++++++++++++++++++-
1 file changed, 25 insertions(+), 1 deletion(-)
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -494,8 +494,14 @@ static int bprm_stack_limits(struct linu
* the stack. They aren't stored until much later when we can't
* signal to the parent that the child has run out of stack space.
* Instead, calculate it here so it's possible to fail gracefully.
+ *
+ * In the case of argc = 0, make sure there is space for adding a
+ * empty string (which will bump argc to 1), to ensure confused
+ * userspace programs don't start processing from argv[1], thinking
+ * argc can never be 0, to keep them from walking envp by accident.
+ * See do_execveat_common().
*/
- ptr_size = (bprm->argc + bprm->envc) * sizeof(void *);
+ ptr_size = (max(bprm->argc, 1) + bprm->envc) * sizeof(void *);
if (limit <= ptr_size)
return -E2BIG;
limit -= ptr_size;
@@ -1886,6 +1892,9 @@ static int do_execveat_common(int fd, st
}
retval = count(argv, MAX_ARG_STRINGS);
+ if (retval == 0)
+ pr_warn_once("process '%s' launched '%s' with NULL argv: empty string added\n",
+ current->comm, bprm->filename);
if (retval < 0)
goto out_free;
bprm->argc = retval;
@@ -1912,6 +1921,19 @@ static int do_execveat_common(int fd, st
if (retval < 0)
goto out_free;
+ /*
+ * When argv is empty, add an empty string ("") as argv[0] to
+ * ensure confused userspace programs that start processing
+ * from argv[1] won't end up walking envp. See also
+ * bprm_stack_limits().
+ */
+ if (bprm->argc == 0) {
+ retval = copy_string_kernel("", bprm);
+ if (retval < 0)
+ goto out_free;
+ bprm->argc = 1;
+ }
+
retval = bprm_execve(bprm, fd, filename, flags);
out_free:
free_bprm(bprm);
@@ -1940,6 +1962,8 @@ int kernel_execve(const char *kernel_fil
}
retval = count_strings_kernel(argv);
+ if (WARN_ON_ONCE(retval == 0))
+ retval = -EINVAL;
if (retval < 0)
goto out_free;
bprm->argc = retval;
From: Yafang Shao <[email protected]>
[ Upstream commit a32ea51a3f17ce6524c9fc19d311e708331c8b5f ]
When I checked the code in skeleton header file generated with my own
bpf prog, I found there may be possible NULL pointer dereference when
destroying skeleton. Then I checked the in-tree bpf progs, finding that is
a common issue. Let's take the generated samples/bpf/xdp_redirect_cpu.skel.h
for example. Below is the generated code in
xdp_redirect_cpu__create_skeleton():
xdp_redirect_cpu__create_skeleton
struct bpf_object_skeleton *s;
s = (struct bpf_object_skeleton *)calloc(1, sizeof(*s));
if (!s)
goto error;
...
error:
bpf_object__destroy_skeleton(s);
return -ENOMEM;
After goto error, the NULL 's' will be deferenced in
bpf_object__destroy_skeleton().
We can simply fix this issue by just adding a NULL check in
bpf_object__destroy_skeleton().
Fixes: d66562fba1ce ("libbpf: Add BPF object skeleton support")
Signed-off-by: Yafang Shao <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
tools/lib/bpf/libbpf.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/tools/lib/bpf/libbpf.c b/tools/lib/bpf/libbpf.c
index b337d6f29098..61df26f048d9 100644
--- a/tools/lib/bpf/libbpf.c
+++ b/tools/lib/bpf/libbpf.c
@@ -10923,6 +10923,9 @@ void bpf_object__detach_skeleton(struct bpf_object_skeleton *s)
void bpf_object__destroy_skeleton(struct bpf_object_skeleton *s)
{
+ if (!s)
+ return;
+
if (s->progs)
bpf_object__detach_skeleton(s);
if (s->obj)
--
2.34.1
From: Vladimir Oltean <[email protected]>
[ Upstream commit feb13dcb1818b775fbd9191f797be67cd605f03e ]
Let user space properly determine that the enetc driver provides
software timestamps.
Fixes: 4caefbce06d1 ("enetc: add software timestamping")
Signed-off-by: Vladimir Oltean <[email protected]>
Reviewed-by: Claudiu Manoil <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/freescale/enetc/enetc_ethtool.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/freescale/enetc/enetc_ethtool.c b/drivers/net/ethernet/freescale/enetc/enetc_ethtool.c
index 9c1690f64a02..cf98a00296ed 100644
--- a/drivers/net/ethernet/freescale/enetc/enetc_ethtool.c
+++ b/drivers/net/ethernet/freescale/enetc/enetc_ethtool.c
@@ -651,7 +651,10 @@ static int enetc_get_ts_info(struct net_device *ndev,
#ifdef CONFIG_FSL_ENETC_PTP_CLOCK
info->so_timestamping = SOF_TIMESTAMPING_TX_HARDWARE |
SOF_TIMESTAMPING_RX_HARDWARE |
- SOF_TIMESTAMPING_RAW_HARDWARE;
+ SOF_TIMESTAMPING_RAW_HARDWARE |
+ SOF_TIMESTAMPING_TX_SOFTWARE |
+ SOF_TIMESTAMPING_RX_SOFTWARE |
+ SOF_TIMESTAMPING_SOFTWARE;
info->tx_types = (1 << HWTSTAMP_TX_OFF) |
(1 << HWTSTAMP_TX_ON);
--
2.34.1
From: Henry Lin <[email protected]>
commit 70c05e4cf63054cd755ca66c1819327b22cb085f upstream.
A race between system resume and device-initiated resume may result in
runtime PM imbalance on USB2 root hub. If a device-initiated resume
starts and system resume xhci_bus_resume() directs U0 before hub driver
sees the resuming device in RESUME state, device-initiated resume will
not be finished in xhci_handle_usb2_port_link_resume(). In this case,
usb_hcd_end_port_resume() call is missing.
This changes calls usb_hcd_end_port_resume() if resuming device reaches
U0 to keep runtime PM balance.
Fixes: a231ec41e6f6 ("xhci: refactor U0 link state handling in get_port_status")
Cc: [email protected]
Signed-off-by: Henry Lin <[email protected]>
Signed-off-by: Mathias Nyman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/host/xhci-hub.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -1002,6 +1002,9 @@ static void xhci_get_usb2_port_status(st
if (link_state == XDEV_U2)
*status |= USB_PORT_STAT_L1;
if (link_state == XDEV_U0) {
+ if (bus_state->resume_done[portnum])
+ usb_hcd_end_port_resume(&port->rhub->hcd->self,
+ portnum);
bus_state->resume_done[portnum] = 0;
clear_bit(portnum, &bus_state->resuming_ports);
if (bus_state->suspended_ports & (1 << portnum)) {
From: Pavel Skripkin <[email protected]>
commit 136bed0bfd3bc9c95c88aafff2d22ecb3a919f23 upstream.
Syzbot reported warning in usb_submit_urb() which is caused by wrong
endpoint type. We should check that in endpoint is actually present to
prevent this warning.
Found pipes are now saved to struct mcba_priv and code uses them
directly instead of making pipes in place.
Fail log:
| usb 5-1: BOGUS urb xfer, pipe 3 != type 1
| WARNING: CPU: 1 PID: 49 at drivers/usb/core/urb.c:502 usb_submit_urb+0xed2/0x18a0 drivers/usb/core/urb.c:502
| Modules linked in:
| CPU: 1 PID: 49 Comm: kworker/1:2 Not tainted 5.17.0-rc6-syzkaller-00184-g38f80f42147f #0
| Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014
| Workqueue: usb_hub_wq hub_event
| RIP: 0010:usb_submit_urb+0xed2/0x18a0 drivers/usb/core/urb.c:502
| ...
| Call Trace:
| <TASK>
| mcba_usb_start drivers/net/can/usb/mcba_usb.c:662 [inline]
| mcba_usb_probe+0x8a3/0xc50 drivers/net/can/usb/mcba_usb.c:858
| usb_probe_interface+0x315/0x7f0 drivers/usb/core/driver.c:396
| call_driver_probe drivers/base/dd.c:517 [inline]
Fixes: 51f3baad7de9 ("can: mcba_usb: Add support for Microchip CAN BUS Analyzer")
Link: https://lore.kernel.org/all/[email protected]
Reported-and-tested-by: [email protected]
Signed-off-by: Pavel Skripkin <[email protected]>
Reviewed-by: Vincent Mailhol <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/can/usb/mcba_usb.c | 26 ++++++++++++++++----------
1 file changed, 16 insertions(+), 10 deletions(-)
--- a/drivers/net/can/usb/mcba_usb.c
+++ b/drivers/net/can/usb/mcba_usb.c
@@ -33,10 +33,6 @@
#define MCBA_USB_RX_BUFF_SIZE 64
#define MCBA_USB_TX_BUFF_SIZE (sizeof(struct mcba_usb_msg))
-/* MCBA endpoint numbers */
-#define MCBA_USB_EP_IN 1
-#define MCBA_USB_EP_OUT 1
-
/* Microchip command id */
#define MBCA_CMD_RECEIVE_MESSAGE 0xE3
#define MBCA_CMD_I_AM_ALIVE_FROM_CAN 0xF5
@@ -84,6 +80,8 @@ struct mcba_priv {
atomic_t free_ctx_cnt;
void *rxbuf[MCBA_MAX_RX_URBS];
dma_addr_t rxbuf_dma[MCBA_MAX_RX_URBS];
+ int rx_pipe;
+ int tx_pipe;
};
/* CAN frame */
@@ -272,10 +270,8 @@ static netdev_tx_t mcba_usb_xmit(struct
memcpy(buf, usb_msg, MCBA_USB_TX_BUFF_SIZE);
- usb_fill_bulk_urb(urb, priv->udev,
- usb_sndbulkpipe(priv->udev, MCBA_USB_EP_OUT), buf,
- MCBA_USB_TX_BUFF_SIZE, mcba_usb_write_bulk_callback,
- ctx);
+ usb_fill_bulk_urb(urb, priv->udev, priv->tx_pipe, buf, MCBA_USB_TX_BUFF_SIZE,
+ mcba_usb_write_bulk_callback, ctx);
urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
usb_anchor_urb(urb, &priv->tx_submitted);
@@ -610,7 +606,7 @@ static void mcba_usb_read_bulk_callback(
resubmit_urb:
usb_fill_bulk_urb(urb, priv->udev,
- usb_rcvbulkpipe(priv->udev, MCBA_USB_EP_OUT),
+ priv->rx_pipe,
urb->transfer_buffer, MCBA_USB_RX_BUFF_SIZE,
mcba_usb_read_bulk_callback, priv);
@@ -655,7 +651,7 @@ static int mcba_usb_start(struct mcba_pr
urb->transfer_dma = buf_dma;
usb_fill_bulk_urb(urb, priv->udev,
- usb_rcvbulkpipe(priv->udev, MCBA_USB_EP_IN),
+ priv->rx_pipe,
buf, MCBA_USB_RX_BUFF_SIZE,
mcba_usb_read_bulk_callback, priv);
urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
@@ -809,6 +805,13 @@ static int mcba_usb_probe(struct usb_int
struct mcba_priv *priv;
int err;
struct usb_device *usbdev = interface_to_usbdev(intf);
+ struct usb_endpoint_descriptor *in, *out;
+
+ err = usb_find_common_endpoints(intf->cur_altsetting, &in, &out, NULL, NULL);
+ if (err) {
+ dev_err(&intf->dev, "Can't find endpoints\n");
+ return err;
+ }
netdev = alloc_candev(sizeof(struct mcba_priv), MCBA_MAX_TX_URBS);
if (!netdev) {
@@ -854,6 +857,9 @@ static int mcba_usb_probe(struct usb_int
goto cleanup_free_candev;
}
+ priv->rx_pipe = usb_rcvbulkpipe(priv->udev, in->bEndpointAddress);
+ priv->tx_pipe = usb_sndbulkpipe(priv->udev, out->bEndpointAddress);
+
devm_can_led_init(netdev);
/* Start USB dev only if we have successfully registered CAN device */
From: Jian Shen <[email protected]>
[ Upstream commit ccb18f05535c96d26e2d559d402acb87700fc5a7 ]
If the MAC address A is configured to vport A and then vport B. The MAC
address of vport A in the hardware becomes invalid. If the address of
vport A is changed to MAC address B, the driver needs to delete the MAC
address A of vport A. Due to the MAC address A of vport A has become
invalid in the hardware entry, so "-ENOENT" is returned. In this case, the
"used_umv_size" value recorded in driver is not updated. As a result, the
MAC entry status of the software is inconsistent with that of the hardware.
Therefore, the driver updates the umv size even if the MAC entry cannot be
found. Ensure that the software and hardware status is consistent.
Fixes: ee4bcd3b7ae4 ("net: hns3: refactor the MAC address configure")
Signed-off-by: Jian Shen <[email protected]>
Signed-off-by: Guangbin Huang <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index 7b94764b4f5d..49129e8002fc 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -7616,12 +7616,11 @@ int hclge_rm_uc_addr_common(struct hclge_vport *vport,
hnae3_set_bit(req.entry_type, HCLGE_MAC_VLAN_BIT0_EN_B, 0);
hclge_prepare_mac_addr(&req, addr, false);
ret = hclge_remove_mac_vlan_tbl(vport, &req);
- if (!ret) {
+ if (!ret || ret == -ENOENT) {
mutex_lock(&hdev->vport_lock);
hclge_update_umv_space(vport, true);
mutex_unlock(&hdev->vport_lock);
- } else if (ret == -ENOENT) {
- ret = 0;
+ return 0;
}
return ret;
--
2.34.1
From: Takashi Iwai <[email protected]>
commit bc55cfd5718c7c23e5524582e9fa70b4d10f2433 upstream.
syzbot caught a potential deadlock between the PCM
runtime->buffer_mutex and the mm->mmap_lock. It was brought by the
recent fix to cover the racy read/write and other ioctls, and in that
commit, I overlooked a (hopefully only) corner case that may take the
revert lock, namely, the OSS mmap. The OSS mmap operation
exceptionally allows to re-configure the parameters inside the OSS
mmap syscall, where mm->mmap_mutex is already held. Meanwhile, the
copy_from/to_user calls at read/write operations also take the
mm->mmap_lock internally, hence it may lead to a AB/BA deadlock.
A similar problem was already seen in the past and we fixed it with a
refcount (in commit b248371628aa). The former fix covered only the
call paths with OSS read/write and OSS ioctls, while we need to cover
the concurrent access via both ALSA and OSS APIs now.
This patch addresses the problem above by replacing the buffer_mutex
lock in the read/write operations with a refcount similar as we've
used for OSS. The new field, runtime->buffer_accessing, keeps the
number of concurrent read/write operations. Unlike the former
buffer_mutex protection, this protects only around the
copy_from/to_user() calls; the other codes are basically protected by
the PCM stream lock. The refcount can be a negative, meaning blocked
by the ioctls. If a negative value is seen, the read/write aborts
with -EBUSY. In the ioctl side, OTOH, they check this refcount, too,
and set to a negative value for blocking unless it's already being
accessed.
Reported-by: [email protected]
Fixes: dca947d4d26d ("ALSA: pcm: Fix races among concurrent read/write and buffer changes")
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/sound/pcm.h | 1 +
sound/core/pcm.c | 1 +
sound/core/pcm_lib.c | 9 +++++----
sound/core/pcm_native.c | 39 ++++++++++++++++++++++++++++++++-------
4 files changed, 39 insertions(+), 11 deletions(-)
--- a/include/sound/pcm.h
+++ b/include/sound/pcm.h
@@ -399,6 +399,7 @@ struct snd_pcm_runtime {
struct fasync_struct *fasync;
bool stop_operating; /* sync_stop will be called */
struct mutex buffer_mutex; /* protect for buffer changes */
+ atomic_t buffer_accessing; /* >0: in r/w operation, <0: blocked */
/* -- private section -- */
void *private_data;
--- a/sound/core/pcm.c
+++ b/sound/core/pcm.c
@@ -970,6 +970,7 @@ int snd_pcm_attach_substream(struct snd_
runtime->status->state = SNDRV_PCM_STATE_OPEN;
mutex_init(&runtime->buffer_mutex);
+ atomic_set(&runtime->buffer_accessing, 0);
substream->runtime = runtime;
substream->private_data = pcm->private_data;
--- a/sound/core/pcm_lib.c
+++ b/sound/core/pcm_lib.c
@@ -1871,11 +1871,9 @@ static int wait_for_avail(struct snd_pcm
if (avail >= runtime->twake)
break;
snd_pcm_stream_unlock_irq(substream);
- mutex_unlock(&runtime->buffer_mutex);
tout = schedule_timeout(wait_time);
- mutex_lock(&runtime->buffer_mutex);
snd_pcm_stream_lock_irq(substream);
set_current_state(TASK_INTERRUPTIBLE);
switch (runtime->status->state) {
@@ -2169,7 +2167,6 @@ snd_pcm_sframes_t __snd_pcm_lib_xfer(str
nonblock = !!(substream->f_flags & O_NONBLOCK);
- mutex_lock(&runtime->buffer_mutex);
snd_pcm_stream_lock_irq(substream);
err = pcm_accessible_state(runtime);
if (err < 0)
@@ -2224,10 +2221,15 @@ snd_pcm_sframes_t __snd_pcm_lib_xfer(str
err = -EINVAL;
goto _end_unlock;
}
+ if (!atomic_inc_unless_negative(&runtime->buffer_accessing)) {
+ err = -EBUSY;
+ goto _end_unlock;
+ }
snd_pcm_stream_unlock_irq(substream);
err = writer(substream, appl_ofs, data, offset, frames,
transfer);
snd_pcm_stream_lock_irq(substream);
+ atomic_dec(&runtime->buffer_accessing);
if (err < 0)
goto _end_unlock;
err = pcm_accessible_state(runtime);
@@ -2257,7 +2259,6 @@ snd_pcm_sframes_t __snd_pcm_lib_xfer(str
if (xfer > 0 && err >= 0)
snd_pcm_update_state(substream, runtime);
snd_pcm_stream_unlock_irq(substream);
- mutex_unlock(&runtime->buffer_mutex);
return xfer > 0 ? (snd_pcm_sframes_t)xfer : err;
}
EXPORT_SYMBOL(__snd_pcm_lib_xfer);
--- a/sound/core/pcm_native.c
+++ b/sound/core/pcm_native.c
@@ -667,6 +667,24 @@ static int snd_pcm_hw_params_choose(stru
return 0;
}
+/* acquire buffer_mutex; if it's in r/w operation, return -EBUSY, otherwise
+ * block the further r/w operations
+ */
+static int snd_pcm_buffer_access_lock(struct snd_pcm_runtime *runtime)
+{
+ if (!atomic_dec_unless_positive(&runtime->buffer_accessing))
+ return -EBUSY;
+ mutex_lock(&runtime->buffer_mutex);
+ return 0; /* keep buffer_mutex, unlocked by below */
+}
+
+/* release buffer_mutex and clear r/w access flag */
+static void snd_pcm_buffer_access_unlock(struct snd_pcm_runtime *runtime)
+{
+ mutex_unlock(&runtime->buffer_mutex);
+ atomic_inc(&runtime->buffer_accessing);
+}
+
#if IS_ENABLED(CONFIG_SND_PCM_OSS)
#define is_oss_stream(substream) ((substream)->oss.oss)
#else
@@ -677,14 +695,16 @@ static int snd_pcm_hw_params(struct snd_
struct snd_pcm_hw_params *params)
{
struct snd_pcm_runtime *runtime;
- int err = 0, usecs;
+ int err, usecs;
unsigned int bits;
snd_pcm_uframes_t frames;
if (PCM_RUNTIME_CHECK(substream))
return -ENXIO;
runtime = substream->runtime;
- mutex_lock(&runtime->buffer_mutex);
+ err = snd_pcm_buffer_access_lock(runtime);
+ if (err < 0)
+ return err;
snd_pcm_stream_lock_irq(substream);
switch (runtime->status->state) {
case SNDRV_PCM_STATE_OPEN:
@@ -801,7 +821,7 @@ static int snd_pcm_hw_params(struct snd_
snd_pcm_lib_free_pages(substream);
}
unlock:
- mutex_unlock(&runtime->buffer_mutex);
+ snd_pcm_buffer_access_unlock(runtime);
return err;
}
@@ -846,7 +866,9 @@ static int snd_pcm_hw_free(struct snd_pc
if (PCM_RUNTIME_CHECK(substream))
return -ENXIO;
runtime = substream->runtime;
- mutex_lock(&runtime->buffer_mutex);
+ result = snd_pcm_buffer_access_lock(runtime);
+ if (result < 0)
+ return result;
snd_pcm_stream_lock_irq(substream);
switch (runtime->status->state) {
case SNDRV_PCM_STATE_SETUP:
@@ -865,7 +887,7 @@ static int snd_pcm_hw_free(struct snd_pc
snd_pcm_set_state(substream, SNDRV_PCM_STATE_OPEN);
cpu_latency_qos_remove_request(&substream->latency_pm_qos_req);
unlock:
- mutex_unlock(&runtime->buffer_mutex);
+ snd_pcm_buffer_access_unlock(runtime);
return result;
}
@@ -1350,12 +1372,15 @@ static int snd_pcm_action_nonatomic(cons
/* Guarantee the group members won't change during non-atomic action */
down_read(&snd_pcm_link_rwsem);
- mutex_lock(&substream->runtime->buffer_mutex);
+ res = snd_pcm_buffer_access_lock(substream->runtime);
+ if (res < 0)
+ goto unlock;
if (snd_pcm_stream_linked(substream))
res = snd_pcm_action_group(ops, substream, state, false);
else
res = snd_pcm_action_single(ops, substream, state);
- mutex_unlock(&substream->runtime->buffer_mutex);
+ snd_pcm_buffer_access_unlock(substream->runtime);
+ unlock:
up_read(&snd_pcm_link_rwsem);
return res;
}
From: Alexander Usyskin <[email protected]>
commit 7bbbd0845818cffa9fa8ccfe52fa1cad58e7e4f2 upstream.
Add Alder Lake N device ID.
Cc: <[email protected]>
Signed-off-by: Alexander Usyskin <[email protected]>
Signed-off-by: Tomas Winkler <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/misc/mei/hw-me-regs.h | 1 +
drivers/misc/mei/pci-me.c | 1 +
2 files changed, 2 insertions(+)
--- a/drivers/misc/mei/hw-me-regs.h
+++ b/drivers/misc/mei/hw-me-regs.h
@@ -107,6 +107,7 @@
#define MEI_DEV_ID_ADP_S 0x7AE8 /* Alder Lake Point S */
#define MEI_DEV_ID_ADP_LP 0x7A60 /* Alder Lake Point LP */
#define MEI_DEV_ID_ADP_P 0x51E0 /* Alder Lake Point P */
+#define MEI_DEV_ID_ADP_N 0x54E0 /* Alder Lake Point N */
/*
* MEI HW Section
--- a/drivers/misc/mei/pci-me.c
+++ b/drivers/misc/mei/pci-me.c
@@ -113,6 +113,7 @@ static const struct pci_device_id mei_me
{MEI_PCI_DEVICE(MEI_DEV_ID_ADP_S, MEI_ME_PCH15_CFG)},
{MEI_PCI_DEVICE(MEI_DEV_ID_ADP_LP, MEI_ME_PCH15_CFG)},
{MEI_PCI_DEVICE(MEI_DEV_ID_ADP_P, MEI_ME_PCH15_CFG)},
+ {MEI_PCI_DEVICE(MEI_DEV_ID_ADP_N, MEI_ME_PCH15_CFG)},
/* required last entry */
{0, }
From: Xiang Chen <[email protected]>
[ Upstream commit c4e070457a93705e56ed06b3910d9e5fe56d3be3 ]
Currently the permission of parameter prot_mask is 0x0, which means that
the member does not appear in sysfs. Change it as other module parameters
to 0444 for world-readable.
[mkp: s/v3/v2/]
Link: https://lore.kernel.org/r/[email protected]
Fixes: d6a9000b81be ("scsi: hisi_sas: Add support for DIF feature for v2 hw")
Reported-by: Yihang Li <[email protected]>
Signed-off-by: Xiang Chen <[email protected]>
Signed-off-by: John Garry <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index 50a1c3478a6e..a8998b016b86 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -514,7 +514,7 @@ MODULE_PARM_DESC(intr_conv, "interrupt converge enable (0-1)");
/* permit overriding the host protection capabilities mask (EEDP/T10 PI) */
static int prot_mask;
-module_param(prot_mask, int, 0);
+module_param(prot_mask, int, 0444);
MODULE_PARM_DESC(prot_mask, " host protection capabilities mask, def=0x0 ");
static bool auto_affine_msi_experimental;
--
2.34.1
From: Randy Dunlap <[email protected]>
commit 460a79e18842caca6fa0c415de4a3ac1e671ac50 upstream.
__setup() handlers should return 1 if the command line option is handled
and 0 if not (or maybe never return 0; it just pollutes init's
environment).
The only reason that this particular __setup handler does not pollute
init's environment is that the setup string contains a '.', as in
"cgroup.memory". This causes init/main.c::unknown_boottoption() to
consider it to be an "Unused module parameter" and ignore it. (This is
for parsing of loadable module parameters any time after kernel init.)
Otherwise the string "cgroup.memory=whatever" would be added to init's
environment strings.
Instead of relying on this '.' quirk, just return 1 to indicate that the
boot option has been handled.
Note that there is no warning message if someone enters:
cgroup.memory=anything_invalid
Link: https://lkml.kernel.org/r/[email protected]
Fixes: f7e1cb6ec51b0 ("mm: memcontrol: account socket memory in unified hierarchy memory controller")
Signed-off-by: Randy Dunlap <[email protected]>
Reported-by: Igor Zhbanov <[email protected]>
Link: lore.kernel.org/r/[email protected]
Reviewed-by: Michal Koutný <[email protected]>
Cc: Johannes Weiner <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Vladimir Davydov <[email protected]>
Cc: Roman Gushchin <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/memcontrol.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -7124,7 +7124,7 @@ static int __init cgroup_memory(char *s)
if (!strcmp(token, "nokmem"))
cgroup_memory_nokmem = true;
}
- return 0;
+ return 1;
}
__setup("cgroup.memory=", cgroup_memory);
From: Biju Das <[email protected]>
[ Upstream commit ebc4cb43ea5ada3db46c80156fca58a54b9bbca8 ]
While computing sgs in spi_map_buf(), the data type
used in min_t() for max_seg_size is 'unsigned int' where
as that of ctlr->max_dma_len is 'size_t'.
min_t(unsigned int,x,y) gives wrong results if one of x/y is
'size_t'
Consider the below examples on a 64-bit machine (ie size_t is
64-bits, and unsigned int is 32-bit).
case 1) min_t(unsigned int, 5, 0x100000001);
case 2) min_t(size_t, 5, 0x100000001);
Case 1 returns '1', where as case 2 returns '5'. As you can see
the result from case 1 is wrong.
This patch fixes the above issue by using the data type of the
parameters that are used in min_t with maximum data length.
Fixes: commit 1a4e53d2fc4f68aa ("spi: Fix invalid sgs value")
Reported-by: Linus Torvalds <[email protected]>
Suggested-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Biju Das <[email protected]>
Reviewed-by: Lad Prabhakar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/spi/spi.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 2396565fc91b..6ea7b286c80c 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -881,10 +881,10 @@ int spi_map_buf(struct spi_controller *ctlr, struct device *dev,
int i, ret;
if (vmalloced_buf || kmap_buf) {
- desc_len = min_t(unsigned int, max_seg_size, PAGE_SIZE);
+ desc_len = min_t(unsigned long, max_seg_size, PAGE_SIZE);
sgs = DIV_ROUND_UP(len + offset_in_page(buf), desc_len);
} else if (virt_addr_valid(buf)) {
- desc_len = min_t(unsigned int, max_seg_size, ctlr->max_dma_len);
+ desc_len = min_t(size_t, max_seg_size, ctlr->max_dma_len);
sgs = DIV_ROUND_UP(len, desc_len);
} else {
return -EINVAL;
--
2.34.1
From: Hangbin Liu <[email protected]>
[ Upstream commit e077ed58c243afc197bc2a2ba0e1ff61135e4ec2 ]
bareudp_create_sock() use AF_INET6 by default if IPv6 CONFIG enabled.
But if user start kernel with ipv6.disable=1, the bareudp sock will
created failed, which cause the interface open failed even with ethertype
ip. e.g.
# ip link add bareudp1 type bareudp dstport 2 ethertype ip
# ip link set bareudp1 up
RTNETLINK answers: Address family not supported by protocol
Fix it by using ipv6_mod_enabled() to check if IPv6 enabled. There is
no need to check IS_ENABLED(CONFIG_IPV6) as ipv6_mod_enabled() will
return false when CONFIG_IPV6 no enabled in include/linux/ipv6.h.
Reported-by: Jianlin Shi <[email protected]>
Fixes: 571912c69f0e ("net: UDP tunnel encapsulation module for tunnelling different protocols like MPLS, IP, NSH etc.")
Signed-off-by: Hangbin Liu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/bareudp.c | 19 ++++++++++---------
1 file changed, 10 insertions(+), 9 deletions(-)
--- a/drivers/net/bareudp.c
+++ b/drivers/net/bareudp.c
@@ -140,14 +140,14 @@ static int bareudp_udp_encap_recv(struct
oiph = skb_network_header(skb);
skb_reset_network_header(skb);
- if (!IS_ENABLED(CONFIG_IPV6) || family == AF_INET)
+ if (!ipv6_mod_enabled() || family == AF_INET)
err = IP_ECN_decapsulate(oiph, skb);
else
err = IP6_ECN_decapsulate(oiph, skb);
if (unlikely(err)) {
if (log_ecn_error) {
- if (!IS_ENABLED(CONFIG_IPV6) || family == AF_INET)
+ if (!ipv6_mod_enabled() || family == AF_INET)
net_info_ratelimited("non-ECT from %pI4 "
"with TOS=%#x\n",
&((struct iphdr *)oiph)->saddr,
@@ -213,11 +213,12 @@ static struct socket *bareudp_create_soc
int err;
memset(&udp_conf, 0, sizeof(udp_conf));
-#if IS_ENABLED(CONFIG_IPV6)
- udp_conf.family = AF_INET6;
-#else
- udp_conf.family = AF_INET;
-#endif
+
+ if (ipv6_mod_enabled())
+ udp_conf.family = AF_INET6;
+ else
+ udp_conf.family = AF_INET;
+
udp_conf.local_udp_port = port;
/* Open UDP socket */
err = udp_sock_create(net, &udp_conf, &sock);
@@ -439,7 +440,7 @@ static netdev_tx_t bareudp_xmit(struct s
}
rcu_read_lock();
- if (IS_ENABLED(CONFIG_IPV6) && info->mode & IP_TUNNEL_INFO_IPV6)
+ if (ipv6_mod_enabled() && info->mode & IP_TUNNEL_INFO_IPV6)
err = bareudp6_xmit_skb(skb, dev, bareudp, info);
else
err = bareudp_xmit_skb(skb, dev, bareudp, info);
@@ -469,7 +470,7 @@ static int bareudp_fill_metadata_dst(str
use_cache = ip_tunnel_dst_cache_usable(skb, info);
- if (!IS_ENABLED(CONFIG_IPV6) || ip_tunnel_info_af(info) == AF_INET) {
+ if (!ipv6_mod_enabled() || ip_tunnel_info_af(info) == AF_INET) {
struct rtable *rt;
__be32 saddr;
From: Yang Guang <[email protected]>
[ Upstream commit 24565bc4115961db7ee64fcc7ad2a7437c0d0a49 ]
coccinelle report:
./drivers/video/fbdev/omap2/omapfb/displays/panel-sony-acx565akm.c:
479:9-17: WARNING: use scnprintf or sprintf
Use sysfs_emit instead of scnprintf or sprintf makes more sense.
Reported-by: Zeal Robot <[email protected]>
Signed-off-by: Yang Guang <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../video/fbdev/omap2/omapfb/displays/panel-sony-acx565akm.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/video/fbdev/omap2/omapfb/displays/panel-sony-acx565akm.c b/drivers/video/fbdev/omap2/omapfb/displays/panel-sony-acx565akm.c
index 1293515e4b16..0cbc5b9183f8 100644
--- a/drivers/video/fbdev/omap2/omapfb/displays/panel-sony-acx565akm.c
+++ b/drivers/video/fbdev/omap2/omapfb/displays/panel-sony-acx565akm.c
@@ -476,7 +476,7 @@ static ssize_t show_cabc_available_modes(struct device *dev,
int i;
if (!ddata->has_cabc)
- return snprintf(buf, PAGE_SIZE, "%s\n", cabc_modes[0]);
+ return sysfs_emit(buf, "%s\n", cabc_modes[0]);
for (i = 0, len = 0;
len < PAGE_SIZE && i < ARRAY_SIZE(cabc_modes); i++)
--
2.34.1
From: Liam Beguin <[email protected]>
commit 51593106b608ae4247cc8da928813347da16d025 upstream.
All four scaling coefficients can take signed values.
Make tmp a signed 64-bit integer and switch to div_s64() to preserve
signs during 64-bit divisions.
Fixes: 8b74816b5a9a ("iio: afe: rescale: new driver")
Signed-off-by: Liam Beguin <[email protected]>
Reviewed-by: Peter Rosin <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/iio/afe/iio-rescale.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/drivers/iio/afe/iio-rescale.c
+++ b/drivers/iio/afe/iio-rescale.c
@@ -38,7 +38,7 @@ static int rescale_read_raw(struct iio_d
int *val, int *val2, long mask)
{
struct rescale *rescale = iio_priv(indio_dev);
- unsigned long long tmp;
+ s64 tmp;
int ret;
switch (mask) {
@@ -59,10 +59,10 @@ static int rescale_read_raw(struct iio_d
*val2 = rescale->denominator;
return IIO_VAL_FRACTIONAL;
case IIO_VAL_FRACTIONAL_LOG2:
- tmp = *val * 1000000000LL;
- do_div(tmp, rescale->denominator);
+ tmp = (s64)*val * 1000000000LL;
+ tmp = div_s64(tmp, rescale->denominator);
tmp *= rescale->numerator;
- do_div(tmp, 1000000000LL);
+ tmp = div_s64(tmp, 1000000000LL);
*val = tmp;
return ret;
default:
From: Damien Le Moal <[email protected]>
commit 8454563e4c2aafbfb81a383ab423ea8b9b430a25 upstream.
To detect for the DMA_NONE (no data transfer) DMA direction,
sas_ata_qc_issue() tests if the command protocol is ATA_PROT_NODATA. This
test does not include the ATA_CMD_NCQ_NON_DATA command as this command
protocol is defined as ATA_PROT_NCQ_NODATA (equal to ATA_PROT_FLAG_NCQ) and
not as ATA_PROT_NODATA.
To include both NCQ and non-NCQ commands when testing for the DMA_NONE DMA
direction, use "!ata_is_data()".
Link: https://lore.kernel.org/r/[email protected]
Fixes: 176ddd89171d ("scsi: libsas: Reset num_scatter if libata marks qc as NODATA")
Cc: [email protected]
Reviewed-by: John Garry <[email protected]>
Reviewed-by: Jack Wang <[email protected]>
Signed-off-by: Damien Le Moal <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/libsas/sas_ata.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/scsi/libsas/sas_ata.c
+++ b/drivers/scsi/libsas/sas_ata.c
@@ -202,7 +202,7 @@ static unsigned int sas_ata_qc_issue(str
task->total_xfer_len = qc->nbytes;
task->num_scatter = qc->n_elem;
task->data_dir = qc->dma_dir;
- } else if (qc->tf.protocol == ATA_PROT_NODATA) {
+ } else if (!ata_is_data(qc->tf.protocol)) {
task->data_dir = DMA_NONE;
} else {
for_each_sg(qc->sg, sg, qc->n_elem, si)
From: Miaoqian Lin <[email protected]>
[ Upstream commit ca85d271531a1e1c86f24b892f57b7d0a3ddb5a6 ]
The reference taken by 'of_find_device_by_node()' must be released when
not needed anymore.
Add the corresponding 'put_device()' in the error handling path.
Fixes: e7f3c5481035 ("[media] coda: use VDOA for un-tiling custom macroblock format")
Signed-off-by: Miaoqian Lin <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/platform/coda/coda-common.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/media/platform/coda/coda-common.c b/drivers/media/platform/coda/coda-common.c
index 1eed69d29149..2333079a83c7 100644
--- a/drivers/media/platform/coda/coda-common.c
+++ b/drivers/media/platform/coda/coda-common.c
@@ -408,6 +408,7 @@ static struct vdoa_data *coda_get_vdoa_data(void)
if (!vdoa_data)
vdoa_data = ERR_PTR(-EPROBE_DEFER);
+ put_device(&vdoa_pdev->dev);
out:
of_node_put(vdoa_node);
--
2.34.1
From: Fabiano Rosas <[email protected]>
[ Upstream commit 69ab6ac380a00244575de02c406dcb9491bf3368 ]
The return of the function is being shadowed by the call to
kvmppc_uvmem_init.
Fixes: ca9f4942670c ("KVM: PPC: Book3S HV: Support for running secure guests")
Signed-off-by: Fabiano Rosas <[email protected]>
Reviewed-by: Nicholas Piggin <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/kvm/book3s_hv.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c
index 527c205d5a5f..38b7a3491aac 100644
--- a/arch/powerpc/kvm/book3s_hv.c
+++ b/arch/powerpc/kvm/book3s_hv.c
@@ -5752,8 +5752,11 @@ static int kvmppc_book3s_init_hv(void)
if (r)
return r;
- if (kvmppc_radix_possible())
+ if (kvmppc_radix_possible()) {
r = kvmppc_radix_init();
+ if (r)
+ return r;
+ }
/*
* POWER9 chips before version 2.02 can't have some threads in
--
2.34.1
From: Chao Yu <[email protected]>
commit 5b5b4f85b01604389f7a0f11ef180a725bf0e2d4 upstream.
As bughunter reported in bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=215709
f2fs may hang when mounting a fuzzed image, the dmesg shows as below:
__filemap_get_folio+0x3a9/0x590
pagecache_get_page+0x18/0x60
__get_meta_page+0x95/0x460 [f2fs]
get_checkpoint_version+0x2a/0x1e0 [f2fs]
validate_checkpoint+0x8e/0x2a0 [f2fs]
f2fs_get_valid_checkpoint+0xd0/0x620 [f2fs]
f2fs_fill_super+0xc01/0x1d40 [f2fs]
mount_bdev+0x18a/0x1c0
f2fs_mount+0x15/0x20 [f2fs]
legacy_get_tree+0x28/0x50
vfs_get_tree+0x27/0xc0
path_mount+0x480/0xaa0
do_mount+0x7c/0xa0
__x64_sys_mount+0x8b/0xe0
do_syscall_64+0x38/0xc0
entry_SYSCALL_64_after_hwframe+0x44/0xae
The root cause is cp_pack_total_block_count field in checkpoint was fuzzed
to one, as calcuated, two cp pack block locates in the same block address,
so then read latter cp pack block, it will block on the page lock due to
the lock has already held when reading previous cp pack block, fix it by
adding sanity check for cp_pack_total_block_count.
Cc: [email protected]
Signed-off-by: Chao Yu <[email protected]>
Signed-off-by: Jaegeuk Kim <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/f2fs/checkpoint.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
--- a/fs/f2fs/checkpoint.c
+++ b/fs/f2fs/checkpoint.c
@@ -851,6 +851,7 @@ static struct page *validate_checkpoint(
struct page *cp_page_1 = NULL, *cp_page_2 = NULL;
struct f2fs_checkpoint *cp_block = NULL;
unsigned long long cur_version = 0, pre_version = 0;
+ unsigned int cp_blocks;
int err;
err = get_checkpoint_version(sbi, cp_addr, &cp_block,
@@ -858,15 +859,16 @@ static struct page *validate_checkpoint(
if (err)
return NULL;
- if (le32_to_cpu(cp_block->cp_pack_total_block_count) >
- sbi->blocks_per_seg) {
+ cp_blocks = le32_to_cpu(cp_block->cp_pack_total_block_count);
+
+ if (cp_blocks > sbi->blocks_per_seg || cp_blocks <= F2FS_CP_PACKS) {
f2fs_warn(sbi, "invalid cp_pack_total_block_count:%u",
le32_to_cpu(cp_block->cp_pack_total_block_count));
goto invalid_cp;
}
pre_version = *version;
- cp_addr += le32_to_cpu(cp_block->cp_pack_total_block_count) - 1;
+ cp_addr += cp_blocks - 1;
err = get_checkpoint_version(sbi, cp_addr, &cp_block,
&cp_page_2, version);
if (err)
From: Marcelo Roberto Jimenez <[email protected]>
[ Upstream commit fc328a7d1fcce263db0b046917a66f3aa6e68719 ]
Some GPIO lines have stopped working after the patch
commit 2ab73c6d8323f ("gpio: Support GPIO controllers without pin-ranges")
And this has supposedly been fixed in the following patches
commit 89ad556b7f96a ("gpio: Avoid using pin ranges with !PINCTRL")
commit 6dbbf84603961 ("gpiolib: Don't free if pin ranges are not defined")
But an erratic behavior where some GPIO lines work while others do not work
has been introduced.
This patch reverts those changes so that the sysfs-gpio interface works
properly again.
Signed-off-by: Marcelo Roberto Jimenez <[email protected]>
Signed-off-by: Bartosz Golaszewski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpio/gpiolib.c | 10 ----------
1 file changed, 10 deletions(-)
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 00526fdd7691..bbf34d84636d 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -1804,11 +1804,6 @@ static inline void gpiochip_irqchip_free_valid_mask(struct gpio_chip *gc)
*/
int gpiochip_generic_request(struct gpio_chip *gc, unsigned offset)
{
-#ifdef CONFIG_PINCTRL
- if (list_empty(&gc->gpiodev->pin_ranges))
- return 0;
-#endif
-
return pinctrl_gpio_request(gc->gpiodev->base + offset);
}
EXPORT_SYMBOL_GPL(gpiochip_generic_request);
@@ -1820,11 +1815,6 @@ EXPORT_SYMBOL_GPL(gpiochip_generic_request);
*/
void gpiochip_generic_free(struct gpio_chip *gc, unsigned offset)
{
-#ifdef CONFIG_PINCTRL
- if (list_empty(&gc->gpiodev->pin_ranges))
- return;
-#endif
-
pinctrl_gpio_free(gc->gpiodev->base + offset);
}
EXPORT_SYMBOL_GPL(gpiochip_generic_free);
--
2.34.1
From: Jiaxin Yu <[email protected]>
commit a7663c89f4193dbf717572e46e5a3251940dbdc8 upstream.
Fixes the following build errors when mt6358 is configured as module:
>> ERROR: modpost: "mt6358_set_mtkaif_protocol"
>> [sound/soc/mediatek/mt8186/mt8186-mt6366-rt1019-rt5682s.ko] undefined!
>> ERROR: modpost: "mt6358_set_mtkaif_protocol"
>> [sound/soc/mediatek/mt8186/mt8186-mt6366-da7219-max98357.ko] undefined!
Fixes: 6a8d4198ca80 ("ASoC: mediatek: mt6358: add codec driver")
Signed-off-by: Jiaxin Yu <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/soc/codecs/mt6358.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/sound/soc/codecs/mt6358.c
+++ b/sound/soc/codecs/mt6358.c
@@ -107,6 +107,7 @@ int mt6358_set_mtkaif_protocol(struct sn
priv->mtkaif_protocol = mtkaif_protocol;
return 0;
}
+EXPORT_SYMBOL_GPL(mt6358_set_mtkaif_protocol);
static void playback_gpio_set(struct mt6358_priv *priv)
{
@@ -273,6 +274,7 @@ int mt6358_mtkaif_calibration_enable(str
1 << RG_AUD_PAD_TOP_DAT_MISO_LOOPBACK_SFT);
return 0;
}
+EXPORT_SYMBOL_GPL(mt6358_mtkaif_calibration_enable);
int mt6358_mtkaif_calibration_disable(struct snd_soc_component *cmpnt)
{
@@ -296,6 +298,7 @@ int mt6358_mtkaif_calibration_disable(st
capture_gpio_reset(priv);
return 0;
}
+EXPORT_SYMBOL_GPL(mt6358_mtkaif_calibration_disable);
int mt6358_set_mtkaif_calibration_phase(struct snd_soc_component *cmpnt,
int phase_1, int phase_2)
@@ -310,6 +313,7 @@ int mt6358_set_mtkaif_calibration_phase(
phase_2 << RG_AUD_PAD_TOP_PHASE_MODE2_SFT);
return 0;
}
+EXPORT_SYMBOL_GPL(mt6358_set_mtkaif_calibration_phase);
/* dl pga gain */
enum {
From: Jonathan Neuschäfer <[email protected]>
[ Upstream commit 3eb00f89162e80083dfcaa842468b510462cfeaa ]
In order that the end of a clk_div_table can be detected, it must be
terminated with a sentinel element (.div = 0).
Fixes: b4626a7f4892 ("CLK: Add Loongson1C clock support")
Signed-off-by: Jonathan Neuschäfer <[email protected]>
Reviewed-by: Philippe Mathieu-Daudé <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/loongson1/clk-loongson1c.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/clk/loongson1/clk-loongson1c.c b/drivers/clk/loongson1/clk-loongson1c.c
index 703f87622cf5..1ebf740380ef 100644
--- a/drivers/clk/loongson1/clk-loongson1c.c
+++ b/drivers/clk/loongson1/clk-loongson1c.c
@@ -37,6 +37,7 @@ static const struct clk_div_table ahb_div_table[] = {
[1] = { .val = 1, .div = 4 },
[2] = { .val = 2, .div = 3 },
[3] = { .val = 3, .div = 3 },
+ [4] = { /* sentinel */ }
};
void __init ls1x_clk_init(void)
--
2.34.1
From: Kuldeep Singh <[email protected]>
[ Upstream commit c953c764e505428f59ffe6afb1c73b89b5b1ac35 ]
Broadcom ns2 platform has spi-cpol and spi-cpho properties set
incorrectly. As per spi-slave-peripheral-prop.yaml, these properties are
of flag or boolean type and not integer type. Fix the values.
Fixes: d69dbd9f41a7c (arm64: dts: Add ARM PL022 SPI DT nodes for NS2)
Signed-off-by: Kuldeep Singh <[email protected]>
CC: Ray Jui <[email protected]>
CC: Scott Branden <[email protected]>
CC: Florian Fainelli <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts b/arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts
index ec19fbf928a1..12a4b1c03390 100644
--- a/arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts
+++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts
@@ -111,8 +111,8 @@
compatible = "silabs,si3226x";
reg = <0>;
spi-max-frequency = <5000000>;
- spi-cpha = <1>;
- spi-cpol = <1>;
+ spi-cpha;
+ spi-cpol;
pl022,hierarchy = <0>;
pl022,interface = <0>;
pl022,slave-tx-disable = <0>;
@@ -135,8 +135,8 @@
at25,byte-len = <0x8000>;
at25,addr-mode = <2>;
at25,page-size = <64>;
- spi-cpha = <1>;
- spi-cpol = <1>;
+ spi-cpha;
+ spi-cpol;
pl022,hierarchy = <0>;
pl022,interface = <0>;
pl022,slave-tx-disable = <0>;
--
2.34.1
From: Namhyung Kim <[email protected]>
commit ee2a098851bfbe8bcdd964c0121f4246f00ff41e upstream.
Let's say that the caller has storage for num_elem stack frames. Then,
the BPF stack helper functions walk the stack for only num_elem frames.
This means that if skip > 0, one keeps only 'num_elem - skip' frames.
This is because it sets init_nr in the perf_callchain_entry to the end
of the buffer to save num_elem entries only. I believe it was because
the perf callchain code unwound the stack frames until it reached the
global max size (sysctl_perf_event_max_stack).
However it now has perf_callchain_entry_ctx.max_stack to limit the
iteration locally. This simplifies the code to handle init_nr in the
BPF callstack entries and removes the confusion with the perf_event's
__PERF_SAMPLE_CALLCHAIN_EARLY which sets init_nr to 0.
Also change the comment on bpf_get_stack() in the header file to be
more explicit what the return value means.
Fixes: c195651e565a ("bpf: add bpf_get_stack helper")
Signed-off-by: Namhyung Kim <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Based-on-patch-by: Eugene Loh <[email protected]>
---
include/uapi/linux/bpf.h | 8 +++---
kernel/bpf/stackmap.c | 56 ++++++++++++++++++++---------------------------
2 files changed, 28 insertions(+), 36 deletions(-)
--- a/include/uapi/linux/bpf.h
+++ b/include/uapi/linux/bpf.h
@@ -2163,8 +2163,8 @@ union bpf_attr {
*
* # sysctl kernel.perf_event_max_stack=<new value>
* Return
- * A non-negative value equal to or less than *size* on success,
- * or a negative error in case of failure.
+ * The non-negative copied *buf* length equal to or less than
+ * *size* on success, or a negative error in case of failure.
*
* long bpf_skb_load_bytes_relative(const void *skb, u32 offset, void *to, u32 len, u32 start_header)
* Description
@@ -3448,8 +3448,8 @@ union bpf_attr {
*
* # sysctl kernel.perf_event_max_stack=<new value>
* Return
- * A non-negative value equal to or less than *size* on success,
- * or a negative error in case of failure.
+ * The non-negative copied *buf* length equal to or less than
+ * *size* on success, or a negative error in case of failure.
*
* long bpf_load_hdr_opt(struct bpf_sock_ops *skops, void *searchby_res, u32 len, u64 flags)
* Description
--- a/kernel/bpf/stackmap.c
+++ b/kernel/bpf/stackmap.c
@@ -358,7 +358,7 @@ static void stack_map_get_build_id_offse
}
static struct perf_callchain_entry *
-get_callchain_entry_for_task(struct task_struct *task, u32 init_nr)
+get_callchain_entry_for_task(struct task_struct *task, u32 max_depth)
{
#ifdef CONFIG_STACKTRACE
struct perf_callchain_entry *entry;
@@ -369,9 +369,8 @@ get_callchain_entry_for_task(struct task
if (!entry)
return NULL;
- entry->nr = init_nr +
- stack_trace_save_tsk(task, (unsigned long *)(entry->ip + init_nr),
- sysctl_perf_event_max_stack - init_nr, 0);
+ entry->nr = stack_trace_save_tsk(task, (unsigned long *)entry->ip,
+ max_depth, 0);
/* stack_trace_save_tsk() works on unsigned long array, while
* perf_callchain_entry uses u64 array. For 32-bit systems, it is
@@ -383,7 +382,7 @@ get_callchain_entry_for_task(struct task
int i;
/* copy data from the end to avoid using extra buffer */
- for (i = entry->nr - 1; i >= (int)init_nr; i--)
+ for (i = entry->nr - 1; i >= 0; i--)
to[i] = (u64)(from[i]);
}
@@ -400,27 +399,19 @@ static long __bpf_get_stackid(struct bpf
{
struct bpf_stack_map *smap = container_of(map, struct bpf_stack_map, map);
struct stack_map_bucket *bucket, *new_bucket, *old_bucket;
- u32 max_depth = map->value_size / stack_map_data_size(map);
- /* stack_map_alloc() checks that max_depth <= sysctl_perf_event_max_stack */
- u32 init_nr = sysctl_perf_event_max_stack - max_depth;
u32 skip = flags & BPF_F_SKIP_FIELD_MASK;
u32 hash, id, trace_nr, trace_len;
bool user = flags & BPF_F_USER_STACK;
u64 *ips;
bool hash_matches;
- /* get_perf_callchain() guarantees that trace->nr >= init_nr
- * and trace-nr <= sysctl_perf_event_max_stack, so trace_nr <= max_depth
- */
- trace_nr = trace->nr - init_nr;
-
- if (trace_nr <= skip)
+ if (trace->nr <= skip)
/* skipping more than usable stack trace */
return -EFAULT;
- trace_nr -= skip;
+ trace_nr = trace->nr - skip;
trace_len = trace_nr * sizeof(u64);
- ips = trace->ip + skip + init_nr;
+ ips = trace->ip + skip;
hash = jhash2((u32 *)ips, trace_len / sizeof(u32), 0);
id = hash & (smap->n_buckets - 1);
bucket = READ_ONCE(smap->buckets[id]);
@@ -477,8 +468,7 @@ BPF_CALL_3(bpf_get_stackid, struct pt_re
u64, flags)
{
u32 max_depth = map->value_size / stack_map_data_size(map);
- /* stack_map_alloc() checks that max_depth <= sysctl_perf_event_max_stack */
- u32 init_nr = sysctl_perf_event_max_stack - max_depth;
+ u32 skip = flags & BPF_F_SKIP_FIELD_MASK;
bool user = flags & BPF_F_USER_STACK;
struct perf_callchain_entry *trace;
bool kernel = !user;
@@ -487,8 +477,12 @@ BPF_CALL_3(bpf_get_stackid, struct pt_re
BPF_F_FAST_STACK_CMP | BPF_F_REUSE_STACKID)))
return -EINVAL;
- trace = get_perf_callchain(regs, init_nr, kernel, user,
- sysctl_perf_event_max_stack, false, false);
+ max_depth += skip;
+ if (max_depth > sysctl_perf_event_max_stack)
+ max_depth = sysctl_perf_event_max_stack;
+
+ trace = get_perf_callchain(regs, 0, kernel, user, max_depth,
+ false, false);
if (unlikely(!trace))
/* couldn't fetch the stack trace */
@@ -579,7 +573,7 @@ static long __bpf_get_stack(struct pt_re
struct perf_callchain_entry *trace_in,
void *buf, u32 size, u64 flags)
{
- u32 init_nr, trace_nr, copy_len, elem_size, num_elem;
+ u32 trace_nr, copy_len, elem_size, num_elem, max_depth;
bool user_build_id = flags & BPF_F_USER_BUILD_ID;
u32 skip = flags & BPF_F_SKIP_FIELD_MASK;
bool user = flags & BPF_F_USER_STACK;
@@ -604,30 +598,28 @@ static long __bpf_get_stack(struct pt_re
goto err_fault;
num_elem = size / elem_size;
- if (sysctl_perf_event_max_stack < num_elem)
- init_nr = 0;
- else
- init_nr = sysctl_perf_event_max_stack - num_elem;
+ max_depth = num_elem + skip;
+ if (sysctl_perf_event_max_stack < max_depth)
+ max_depth = sysctl_perf_event_max_stack;
if (trace_in)
trace = trace_in;
else if (kernel && task)
- trace = get_callchain_entry_for_task(task, init_nr);
+ trace = get_callchain_entry_for_task(task, max_depth);
else
- trace = get_perf_callchain(regs, init_nr, kernel, user,
- sysctl_perf_event_max_stack,
+ trace = get_perf_callchain(regs, 0, kernel, user, max_depth,
false, false);
if (unlikely(!trace))
goto err_fault;
- trace_nr = trace->nr - init_nr;
- if (trace_nr < skip)
+ if (trace->nr < skip)
goto err_fault;
- trace_nr -= skip;
+ trace_nr = trace->nr - skip;
trace_nr = (trace_nr <= num_elem) ? trace_nr : num_elem;
copy_len = trace_nr * elem_size;
- ips = trace->ip + skip + init_nr;
+
+ ips = trace->ip + skip;
if (user && user_build_id)
stack_map_get_build_id_offset(buf, ips, trace_nr, user);
else
From: Jammy Huang <[email protected]>
[ Upstream commit 4b732a0016853eaff35944f900b0db66f3914374 ]
Previous reg-field, 0x98[11:0], stands for the period of the detected
hsync signal.
Use the correct reg, 0xa0, to get h-total in pixels.
Fixes: d2b4387f3bdf ("media: platform: Add Aspeed Video Engine driver")
Signed-off-by: Jammy Huang <[email protected]>
Reviewed-by: Joel Stanley <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/platform/aspeed-video.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/media/platform/aspeed-video.c b/drivers/media/platform/aspeed-video.c
index debc7509c173..757a58829a51 100644
--- a/drivers/media/platform/aspeed-video.c
+++ b/drivers/media/platform/aspeed-video.c
@@ -151,7 +151,7 @@
#define VE_SRC_TB_EDGE_DET_BOT GENMASK(28, VE_SRC_TB_EDGE_DET_BOT_SHF)
#define VE_MODE_DETECT_STATUS 0x098
-#define VE_MODE_DETECT_H_PIXELS GENMASK(11, 0)
+#define VE_MODE_DETECT_H_PERIOD GENMASK(11, 0)
#define VE_MODE_DETECT_V_LINES_SHF 16
#define VE_MODE_DETECT_V_LINES GENMASK(27, VE_MODE_DETECT_V_LINES_SHF)
#define VE_MODE_DETECT_STATUS_VSYNC BIT(28)
@@ -162,6 +162,8 @@
#define VE_SYNC_STATUS_VSYNC_SHF 16
#define VE_SYNC_STATUS_VSYNC GENMASK(27, VE_SYNC_STATUS_VSYNC_SHF)
+#define VE_H_TOTAL_PIXELS 0x0A0
+
#define VE_INTERRUPT_CTRL 0x304
#define VE_INTERRUPT_STATUS 0x308
#define VE_INTERRUPT_MODE_DETECT_WD BIT(0)
@@ -765,6 +767,7 @@ static void aspeed_video_get_resolution(struct aspeed_video *video)
u32 src_lr_edge;
u32 src_tb_edge;
u32 sync;
+ u32 htotal;
struct v4l2_bt_timings *det = &video->detected_timings;
det->width = MIN_WIDTH;
@@ -809,6 +812,7 @@ static void aspeed_video_get_resolution(struct aspeed_video *video)
src_tb_edge = aspeed_video_read(video, VE_SRC_TB_EDGE_DET);
mds = aspeed_video_read(video, VE_MODE_DETECT_STATUS);
sync = aspeed_video_read(video, VE_SYNC_STATUS);
+ htotal = aspeed_video_read(video, VE_H_TOTAL_PIXELS);
video->frame_bottom = (src_tb_edge & VE_SRC_TB_EDGE_DET_BOT) >>
VE_SRC_TB_EDGE_DET_BOT_SHF;
@@ -825,8 +829,7 @@ static void aspeed_video_get_resolution(struct aspeed_video *video)
VE_SRC_LR_EDGE_DET_RT_SHF;
video->frame_left = src_lr_edge & VE_SRC_LR_EDGE_DET_LEFT;
det->hfrontporch = video->frame_left;
- det->hbackporch = (mds & VE_MODE_DETECT_H_PIXELS) -
- video->frame_right;
+ det->hbackporch = htotal - video->frame_right;
det->hsync = sync & VE_SYNC_STATUS_HSYNC;
if (video->frame_left > video->frame_right)
continue;
--
2.34.1
From: Chao Yu <[email protected]>
[ Upstream commit f41ee8b91c00770d718be2ff4852a80017ae9ab3 ]
As Wenqing Liu reported in bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=215657
- Overview
UBSAN: array-index-out-of-bounds in fs/f2fs/segment.c:3460:2 when mount and operate a corrupted image
- Reproduce
tested on kernel 5.17-rc4, 5.17-rc6
1. mkdir test_crash
2. cd test_crash
3. unzip tmp2.zip
4. mkdir mnt
5. ./single_test.sh f2fs 2
- Kernel dump
[ 46.434454] loop0: detected capacity change from 0 to 131072
[ 46.529839] F2FS-fs (loop0): Mounted with checkpoint version = 7548c2d9
[ 46.738319] ================================================================================
[ 46.738412] UBSAN: array-index-out-of-bounds in fs/f2fs/segment.c:3460:2
[ 46.738475] index 231 is out of range for type 'unsigned int [2]'
[ 46.738539] CPU: 2 PID: 939 Comm: umount Not tainted 5.17.0-rc6 #1
[ 46.738547] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-1ubuntu1.1 04/01/2014
[ 46.738551] Call Trace:
[ 46.738556] <TASK>
[ 46.738563] dump_stack_lvl+0x47/0x5c
[ 46.738581] ubsan_epilogue+0x5/0x50
[ 46.738592] __ubsan_handle_out_of_bounds+0x68/0x80
[ 46.738604] f2fs_allocate_data_block+0xdff/0xe60 [f2fs]
[ 46.738819] do_write_page+0xef/0x210 [f2fs]
[ 46.738934] f2fs_do_write_node_page+0x3f/0x80 [f2fs]
[ 46.739038] __write_node_page+0x2b7/0x920 [f2fs]
[ 46.739162] f2fs_sync_node_pages+0x943/0xb00 [f2fs]
[ 46.739293] f2fs_write_checkpoint+0x7bb/0x1030 [f2fs]
[ 46.739405] kill_f2fs_super+0x125/0x150 [f2fs]
[ 46.739507] deactivate_locked_super+0x60/0xc0
[ 46.739517] deactivate_super+0x70/0xb0
[ 46.739524] cleanup_mnt+0x11a/0x200
[ 46.739532] __cleanup_mnt+0x16/0x20
[ 46.739538] task_work_run+0x67/0xa0
[ 46.739547] exit_to_user_mode_prepare+0x18c/0x1a0
[ 46.739559] syscall_exit_to_user_mode+0x26/0x40
[ 46.739568] do_syscall_64+0x46/0xb0
[ 46.739584] entry_SYSCALL_64_after_hwframe+0x44/0xae
The root cause is we missed to do sanity check on curseg->alloc_type,
result in out-of-bound accessing on sbi->block_count[] array, fix it.
Signed-off-by: Chao Yu <[email protected]>
Signed-off-by: Jaegeuk Kim <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/f2fs/segment.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/fs/f2fs/segment.c b/fs/f2fs/segment.c
index d04b449978aa..49f5cb532738 100644
--- a/fs/f2fs/segment.c
+++ b/fs/f2fs/segment.c
@@ -4650,6 +4650,13 @@ static int sanity_check_curseg(struct f2fs_sb_info *sbi)
sanity_check_seg_type(sbi, curseg->seg_type);
+ if (curseg->alloc_type != LFS && curseg->alloc_type != SSR) {
+ f2fs_err(sbi,
+ "Current segment has invalid alloc_type:%d",
+ curseg->alloc_type);
+ return -EFSCORRUPTED;
+ }
+
if (f2fs_test_bit(blkofs, se->cur_valid_map))
goto out;
--
2.34.1
From: Marcel Ziswiler <[email protected]>
[ Upstream commit e95622289f263662240544a9f0009b25c19e64d4 ]
This avoids firmware load error and sysfs fallback reported as follows:
[ 0.199448] imx-sdma 302c0000.dma-controller: Direct firmware load
for imx/sdma/sdma-imx7d.bin failed with error -2
[ 0.199487] imx-sdma 302c0000.dma-controller: Falling back to sysfs
fallback for: imx/sdma/sdma-imx7d.bin
Signed-off-by: Marcel Ziswiler <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/configs/defconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 5cfe3cf6f2ac..2bdf38d05fa5 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -837,7 +837,7 @@ CONFIG_DMADEVICES=y
CONFIG_DMA_BCM2835=y
CONFIG_DMA_SUN6I=m
CONFIG_FSL_EDMA=y
-CONFIG_IMX_SDMA=y
+CONFIG_IMX_SDMA=m
CONFIG_K3_DMA=y
CONFIG_MV_XOR=y
CONFIG_MV_XOR_V2=y
--
2.34.1
From: Chen-Yu Tsai <[email protected]>
commit 188e5834b930acd03ad3cf7c5e7aa24db9665a29 upstream.
The bias-pull-* properties, or PIN_CONFIG_BIAS_PULL_* pin config
parameters, accept optional arguments in ohms denoting the strength of
the pin bias.
Print these values out in debugfs as well.
Fixes: eec450713e5c ("pinctrl: pinconf-generic: Add flag to print arguments")
Signed-off-by: Chen-Yu Tsai <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Tested-by: AngeloGioacchino Del Regno <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pinctrl/pinconf-generic.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/pinctrl/pinconf-generic.c
+++ b/drivers/pinctrl/pinconf-generic.c
@@ -30,10 +30,10 @@ static const struct pin_config_item conf
PCONFDUMP(PIN_CONFIG_BIAS_BUS_HOLD, "input bias bus hold", NULL, false),
PCONFDUMP(PIN_CONFIG_BIAS_DISABLE, "input bias disabled", NULL, false),
PCONFDUMP(PIN_CONFIG_BIAS_HIGH_IMPEDANCE, "input bias high impedance", NULL, false),
- PCONFDUMP(PIN_CONFIG_BIAS_PULL_DOWN, "input bias pull down", NULL, false),
+ PCONFDUMP(PIN_CONFIG_BIAS_PULL_DOWN, "input bias pull down", "ohms", true),
PCONFDUMP(PIN_CONFIG_BIAS_PULL_PIN_DEFAULT,
- "input bias pull to pin specific state", NULL, false),
- PCONFDUMP(PIN_CONFIG_BIAS_PULL_UP, "input bias pull up", NULL, false),
+ "input bias pull to pin specific state", "ohms", true),
+ PCONFDUMP(PIN_CONFIG_BIAS_PULL_UP, "input bias pull up", "ohms", true),
PCONFDUMP(PIN_CONFIG_DRIVE_OPEN_DRAIN, "output drive open drain", NULL, false),
PCONFDUMP(PIN_CONFIG_DRIVE_OPEN_SOURCE, "output drive open source", NULL, false),
PCONFDUMP(PIN_CONFIG_DRIVE_PUSH_PULL, "output drive push pull", NULL, false),
From: Dan Carpenter <[email protected]>
[ Upstream commit 67e4550ecd6164bfbdff54c169e5bbf9ccfaf14d ]
Call i2c_unregister_device(audio) on this error path.
Fixes: d3b2ccd9e307 ("[media] s2250: convert to the control framework")
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/usb/go7007/s2250-board.c | 10 ++++------
1 file changed, 4 insertions(+), 6 deletions(-)
diff --git a/drivers/media/usb/go7007/s2250-board.c b/drivers/media/usb/go7007/s2250-board.c
index b9e45124673b..2e5913bccb38 100644
--- a/drivers/media/usb/go7007/s2250-board.c
+++ b/drivers/media/usb/go7007/s2250-board.c
@@ -504,6 +504,7 @@ static int s2250_probe(struct i2c_client *client,
u8 *data;
struct go7007 *go = i2c_get_adapdata(adapter);
struct go7007_usb *usb = go->hpi_context;
+ int err = -EIO;
audio = i2c_new_dummy_device(adapter, TLV320_ADDRESS >> 1);
if (IS_ERR(audio))
@@ -532,11 +533,8 @@ static int s2250_probe(struct i2c_client *client,
V4L2_CID_HUE, -512, 511, 1, 0);
sd->ctrl_handler = &state->hdl;
if (state->hdl.error) {
- int err = state->hdl.error;
-
- v4l2_ctrl_handler_free(&state->hdl);
- kfree(state);
- return err;
+ err = state->hdl.error;
+ goto fail;
}
state->std = V4L2_STD_NTSC;
@@ -600,7 +598,7 @@ static int s2250_probe(struct i2c_client *client,
i2c_unregister_device(audio);
v4l2_ctrl_handler_free(&state->hdl);
kfree(state);
- return -EIO;
+ return err;
}
static int s2250_remove(struct i2c_client *client)
--
2.34.1
From: Yu Kuai <[email protected]>
[ Upstream commit 8410f70977734f21b8ed45c37e925d311dfda2e7 ]
Our test report a UAF:
[ 2073.019181] ==================================================================
[ 2073.019188] BUG: KASAN: use-after-free in __bfq_put_async_bfqq+0xa0/0x168
[ 2073.019191] Write of size 8 at addr ffff8000ccf64128 by task rmmod/72584
[ 2073.019192]
[ 2073.019196] CPU: 0 PID: 72584 Comm: rmmod Kdump: loaded Not tainted 4.19.90-yk #5
[ 2073.019198] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
[ 2073.019200] Call trace:
[ 2073.019203] dump_backtrace+0x0/0x310
[ 2073.019206] show_stack+0x28/0x38
[ 2073.019210] dump_stack+0xec/0x15c
[ 2073.019216] print_address_description+0x68/0x2d0
[ 2073.019220] kasan_report+0x238/0x2f0
[ 2073.019224] __asan_store8+0x88/0xb0
[ 2073.019229] __bfq_put_async_bfqq+0xa0/0x168
[ 2073.019233] bfq_put_async_queues+0xbc/0x208
[ 2073.019236] bfq_pd_offline+0x178/0x238
[ 2073.019240] blkcg_deactivate_policy+0x1f0/0x420
[ 2073.019244] bfq_exit_queue+0x128/0x178
[ 2073.019249] blk_mq_exit_sched+0x12c/0x160
[ 2073.019252] elevator_exit+0xc8/0xd0
[ 2073.019256] blk_exit_queue+0x50/0x88
[ 2073.019259] blk_cleanup_queue+0x228/0x3d8
[ 2073.019267] null_del_dev+0xfc/0x1e0 [null_blk]
[ 2073.019274] null_exit+0x90/0x114 [null_blk]
[ 2073.019278] __arm64_sys_delete_module+0x358/0x5a0
[ 2073.019282] el0_svc_common+0xc8/0x320
[ 2073.019287] el0_svc_handler+0xf8/0x160
[ 2073.019290] el0_svc+0x10/0x218
[ 2073.019291]
[ 2073.019294] Allocated by task 14163:
[ 2073.019301] kasan_kmalloc+0xe0/0x190
[ 2073.019305] kmem_cache_alloc_node_trace+0x1cc/0x418
[ 2073.019308] bfq_pd_alloc+0x54/0x118
[ 2073.019313] blkcg_activate_policy+0x250/0x460
[ 2073.019317] bfq_create_group_hierarchy+0x38/0x110
[ 2073.019321] bfq_init_queue+0x6d0/0x948
[ 2073.019325] blk_mq_init_sched+0x1d8/0x390
[ 2073.019330] elevator_switch_mq+0x88/0x170
[ 2073.019334] elevator_switch+0x140/0x270
[ 2073.019338] elv_iosched_store+0x1a4/0x2a0
[ 2073.019342] queue_attr_store+0x90/0xe0
[ 2073.019348] sysfs_kf_write+0xa8/0xe8
[ 2073.019351] kernfs_fop_write+0x1f8/0x378
[ 2073.019359] __vfs_write+0xe0/0x360
[ 2073.019363] vfs_write+0xf0/0x270
[ 2073.019367] ksys_write+0xdc/0x1b8
[ 2073.019371] __arm64_sys_write+0x50/0x60
[ 2073.019375] el0_svc_common+0xc8/0x320
[ 2073.019380] el0_svc_handler+0xf8/0x160
[ 2073.019383] el0_svc+0x10/0x218
[ 2073.019385]
[ 2073.019387] Freed by task 72584:
[ 2073.019391] __kasan_slab_free+0x120/0x228
[ 2073.019394] kasan_slab_free+0x10/0x18
[ 2073.019397] kfree+0x94/0x368
[ 2073.019400] bfqg_put+0x64/0xb0
[ 2073.019404] bfqg_and_blkg_put+0x90/0xb0
[ 2073.019408] bfq_put_queue+0x220/0x228
[ 2073.019413] __bfq_put_async_bfqq+0x98/0x168
[ 2073.019416] bfq_put_async_queues+0xbc/0x208
[ 2073.019420] bfq_pd_offline+0x178/0x238
[ 2073.019424] blkcg_deactivate_policy+0x1f0/0x420
[ 2073.019429] bfq_exit_queue+0x128/0x178
[ 2073.019433] blk_mq_exit_sched+0x12c/0x160
[ 2073.019437] elevator_exit+0xc8/0xd0
[ 2073.019440] blk_exit_queue+0x50/0x88
[ 2073.019443] blk_cleanup_queue+0x228/0x3d8
[ 2073.019451] null_del_dev+0xfc/0x1e0 [null_blk]
[ 2073.019459] null_exit+0x90/0x114 [null_blk]
[ 2073.019462] __arm64_sys_delete_module+0x358/0x5a0
[ 2073.019467] el0_svc_common+0xc8/0x320
[ 2073.019471] el0_svc_handler+0xf8/0x160
[ 2073.019474] el0_svc+0x10/0x218
[ 2073.019475]
[ 2073.019479] The buggy address belongs to the object at ffff8000ccf63f00
which belongs to the cache kmalloc-1024 of size 1024
[ 2073.019484] The buggy address is located 552 bytes inside of
1024-byte region [ffff8000ccf63f00, ffff8000ccf64300)
[ 2073.019486] The buggy address belongs to the page:
[ 2073.019492] page:ffff7e000333d800 count:1 mapcount:0 mapping:ffff8000c0003a00 index:0x0 compound_mapcount: 0
[ 2073.020123] flags: 0x7ffff0000008100(slab|head)
[ 2073.020403] raw: 07ffff0000008100 ffff7e0003334c08 ffff7e00001f5a08 ffff8000c0003a00
[ 2073.020409] raw: 0000000000000000 00000000001c001c 00000001ffffffff 0000000000000000
[ 2073.020411] page dumped because: kasan: bad access detected
[ 2073.020412]
[ 2073.020414] Memory state around the buggy address:
[ 2073.020420] ffff8000ccf64000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 2073.020424] ffff8000ccf64080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 2073.020428] >ffff8000ccf64100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 2073.020430] ^
[ 2073.020434] ffff8000ccf64180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 2073.020438] ffff8000ccf64200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 2073.020439] ==================================================================
The same problem exist in mainline as well.
This is because oom_bfqq is moved to a non-root group, thus root_group
is freed earlier.
Thus fix the problem by don't move oom_bfqq.
Signed-off-by: Yu Kuai <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Acked-by: Paolo Valente <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
block/bfq-cgroup.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/block/bfq-cgroup.c b/block/bfq-cgroup.c
index b791e2041e49..c2fdd6fcdaee 100644
--- a/block/bfq-cgroup.c
+++ b/block/bfq-cgroup.c
@@ -642,6 +642,12 @@ void bfq_bfqq_move(struct bfq_data *bfqd, struct bfq_queue *bfqq,
{
struct bfq_entity *entity = &bfqq->entity;
+ /*
+ * oom_bfqq is not allowed to move, oom_bfqq will hold ref to root_group
+ * until elevator exit.
+ */
+ if (bfqq == &bfqd->oom_bfqq)
+ return;
/*
* Get extra reference to prevent bfqq from being freed in
* next possible expire or deactivate.
--
2.34.1
From: Oliver Hartkopp <[email protected]>
[ Upstream commit e382fea8ae54f5bb62869c6b69b33993d43adeca ]
In commit 42bf50a1795a ("can: isotp: support MSG_TRUNC flag when
reading from socket") a new check for recvmsg flags has been
introduced that only checked for the flags that are handled in
isotp_recvmsg() itself.
This accidentally removed the MSG_PEEK feature flag which is processed
later in the call chain in __skb_try_recv_from_queue().
Add MSG_PEEK to the set of valid flags to restore the feature.
Fixes: 42bf50a1795a ("can: isotp: support MSG_TRUNC flag when reading from socket")
Link: https://github.com/linux-can/can-utils/issues/347#issuecomment-1079554254
Link: https://lore.kernel.org/all/[email protected]
Reported-by: Derek Will <[email protected]>
Suggested-by: Derek Will <[email protected]>
Tested-by: Derek Will <[email protected]>
Signed-off-by: Oliver Hartkopp <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/can/isotp.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/can/isotp.c b/net/can/isotp.c
index 671c3673b7ea..63e6e8923200 100644
--- a/net/can/isotp.c
+++ b/net/can/isotp.c
@@ -1007,7 +1007,7 @@ static int isotp_recvmsg(struct socket *sock, struct msghdr *msg, size_t size,
int noblock = flags & MSG_DONTWAIT;
int ret = 0;
- if (flags & ~(MSG_DONTWAIT | MSG_TRUNC))
+ if (flags & ~(MSG_DONTWAIT | MSG_TRUNC | MSG_PEEK))
return -EINVAL;
if (!so->bound)
--
2.34.1
From: Christophe JAILLET <[email protected]>
[ Upstream commit 83ba7e895debc529803a7a258653f2fe9bf3bf40 ]
A struct device can never be devm_alloc()'ed.
Here, it is embedded in "struct fsi_master", and "struct fsi_master" is
embedded in "struct fsi_master_aspeed".
Since "struct device" is embedded, the data structure embedding it must be
released with the release function, as is already done here.
So use kzalloc() instead of devm_kzalloc() when allocating "aspeed" and
update all error handling branches accordingly.
This prevent a potential double free().
This also fix another issue if opb_readl() fails. Instead of a direct
return, it now jumps in the error handling path.
Fixes: 606397d67f41 ("fsi: Add ast2600 master driver")
Suggested-by: Greg KH <[email protected]>
Suggested-by: Guenter Roeck <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Signed-off-by: Christophe JAILLET <[email protected]>
Link: https://lore.kernel.org/r/2c123f8b0a40dc1a061fae982169fe030b4f47e6.1641765339.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/fsi/fsi-master-aspeed.c | 17 +++++++++++------
1 file changed, 11 insertions(+), 6 deletions(-)
diff --git a/drivers/fsi/fsi-master-aspeed.c b/drivers/fsi/fsi-master-aspeed.c
index 5d2469d44607..87edc77260d2 100644
--- a/drivers/fsi/fsi-master-aspeed.c
+++ b/drivers/fsi/fsi-master-aspeed.c
@@ -534,25 +534,28 @@ static int fsi_master_aspeed_probe(struct platform_device *pdev)
return rc;
}
- aspeed = devm_kzalloc(&pdev->dev, sizeof(*aspeed), GFP_KERNEL);
+ aspeed = kzalloc(sizeof(*aspeed), GFP_KERNEL);
if (!aspeed)
return -ENOMEM;
aspeed->dev = &pdev->dev;
aspeed->base = devm_platform_ioremap_resource(pdev, 0);
- if (IS_ERR(aspeed->base))
- return PTR_ERR(aspeed->base);
+ if (IS_ERR(aspeed->base)) {
+ rc = PTR_ERR(aspeed->base);
+ goto err_free_aspeed;
+ }
aspeed->clk = devm_clk_get(aspeed->dev, NULL);
if (IS_ERR(aspeed->clk)) {
dev_err(aspeed->dev, "couldn't get clock\n");
- return PTR_ERR(aspeed->clk);
+ rc = PTR_ERR(aspeed->clk);
+ goto err_free_aspeed;
}
rc = clk_prepare_enable(aspeed->clk);
if (rc) {
dev_err(aspeed->dev, "couldn't enable clock\n");
- return rc;
+ goto err_free_aspeed;
}
rc = setup_cfam_reset(aspeed);
@@ -587,7 +590,7 @@ static int fsi_master_aspeed_probe(struct platform_device *pdev)
rc = opb_readl(aspeed, ctrl_base + FSI_MVER, &raw);
if (rc) {
dev_err(&pdev->dev, "failed to read hub version\n");
- return rc;
+ goto err_release;
}
reg = be32_to_cpu(raw);
@@ -626,6 +629,8 @@ static int fsi_master_aspeed_probe(struct platform_device *pdev)
err_release:
clk_disable_unprepare(aspeed->clk);
+err_free_aspeed:
+ kfree(aspeed);
return rc;
}
--
2.34.1
From: Liguang Zhang <[email protected]>
commit 92912b175178c7e895f5e5e9f1e30ac30319162b upstream.
Writes to a Downstream Port's Slot Control register are PCIe hotplug
"commands." If the Port supports Command Completed events, software must
wait for a command to complete before writing to Slot Control again.
pcie_do_write_cmd() sets ctrl->cmd_busy when it writes to Slot Control. If
software notification is enabled, i.e., PCI_EXP_SLTCTL_HPIE and
PCI_EXP_SLTCTL_CCIE are set, ctrl->cmd_busy is cleared by pciehp_isr().
But when software notification is disabled, as it is when pcie_init()
powers off an empty slot, pcie_wait_cmd() uses pcie_poll_cmd() to poll for
command completion, and it neglects to clear ctrl->cmd_busy, which leads to
spurious timeouts:
pcieport 0000:00:03.0: pciehp: Timeout on hotplug command 0x01c0 (issued 2264 msec ago)
pcieport 0000:00:03.0: pciehp: Timeout on hotplug command 0x05c0 (issued 2288 msec ago)
Clear ctrl->cmd_busy in pcie_poll_cmd() when it detects a Command Completed
event (PCI_EXP_SLTSTA_CC).
[bhelgaas: commit log]
Fixes: a5dd4b4b0570 ("PCI: pciehp: Wait for hotplug command completion where necessary")
Link: https://lore.kernel.org/r/[email protected]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215143
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Liguang Zhang <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Reviewed-by: Lukas Wunner <[email protected]>
Cc: [email protected] # v4.19+
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/hotplug/pciehp_hpc.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -98,6 +98,8 @@ static int pcie_poll_cmd(struct controll
if (slot_status & PCI_EXP_SLTSTA_CC) {
pcie_capability_write_word(pdev, PCI_EXP_SLTSTA,
PCI_EXP_SLTSTA_CC);
+ ctrl->cmd_busy = 0;
+ smp_mb();
return 1;
}
msleep(10);
From: Jia-Ju Bai <[email protected]>
[ Upstream commit 4d06f92f38b799295ae22c98be7a20cac3e2a1a7 ]
The function devm_kzalloc() in rt5663_parse_dp() can fail, so its return
value should be checked.
Fixes: 457c25efc592 ("ASoC: rt5663: Add the function of impedance sensing")
Reported-by: TOTE Robot <[email protected]>
Signed-off-by: Jia-Ju Bai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/codecs/rt5663.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/sound/soc/codecs/rt5663.c b/sound/soc/codecs/rt5663.c
index db8a41aaa385..4423e61bf1ab 100644
--- a/sound/soc/codecs/rt5663.c
+++ b/sound/soc/codecs/rt5663.c
@@ -3478,6 +3478,8 @@ static int rt5663_parse_dp(struct rt5663_priv *rt5663, struct device *dev)
table_size = sizeof(struct impedance_mapping_table) *
rt5663->pdata.impedance_sensing_num;
rt5663->imp_table = devm_kzalloc(dev, table_size, GFP_KERNEL);
+ if (!rt5663->imp_table)
+ return -ENOMEM;
ret = device_property_read_u32_array(dev,
"realtek,impedance_sensing_table",
(u32 *)rt5663->imp_table, table_size);
--
2.34.1
From: Andrew Price <[email protected]>
commit 27ca8273fda398638ca994a207323a85b6d81190 upstream.
Per fstrim(8) we must round up the minlen argument to the fs block size.
The current calculation doesn't take into account devices that have a
discard granularity and requested minlen less than 1 fs block, so the
value can get shifted away to zero in the translation to fs blocks.
The zero minlen passed to gfs2_rgrp_send_discards() then allows
sb_issue_discard() to be called with nr_sects == 0 which returns -EINVAL
and results in gfs2_rgrp_send_discards() returning -EIO.
Make sure minlen is never < 1 fs block by taking the max of the
requested minlen and the fs block size before comparing to the device's
discard granularity and shifting to fs blocks.
Fixes: 076f0faa764ab ("GFS2: Fix FITRIM argument handling")
Signed-off-by: Andrew Price <[email protected]>
Signed-off-by: Andreas Gruenbacher <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/gfs2/rgrp.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/fs/gfs2/rgrp.c
+++ b/fs/gfs2/rgrp.c
@@ -1389,7 +1389,8 @@ int gfs2_fitrim(struct file *filp, void
start = r.start >> bs_shift;
end = start + (r.len >> bs_shift);
- minlen = max_t(u64, r.minlen,
+ minlen = max_t(u64, r.minlen, sdp->sd_sb.sb_bsize);
+ minlen = max_t(u64, minlen,
q->limits.discard_granularity) >> bs_shift;
if (end <= start || minlen > sdp->sd_max_rg_data)
From: Amadeusz Sławiński <[email protected]>
commit feb00b736af64875560f371fe7f58b0b7f239046 upstream.
There is no reason to force readwrite access on TLV controls. It can be
either read, write or both. This is further evidenced in code where it
performs following checks:
if ((k->access & SNDRV_CTL_ELEM_ACCESS_TLV_READ) && !sbe->get)
return -EINVAL;
if ((k->access & SNDRV_CTL_ELEM_ACCESS_TLV_WRITE) && !sbe->put)
return -EINVAL;
Fixes: 1a3232d2f61d ("ASoC: topology: Add support for TLV bytes controls")
Signed-off-by: Amadeusz Sławiński <[email protected]>
Reviewed-by: Cezary Rojewski <[email protected]>
Reviewed-by: Pierre-Louis Bossart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/soc/soc-topology.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/sound/soc/soc-topology.c
+++ b/sound/soc/soc-topology.c
@@ -578,7 +578,8 @@ static int soc_tplg_kcontrol_bind_io(str
if (le32_to_cpu(hdr->ops.info) == SND_SOC_TPLG_CTL_BYTES
&& k->iface & SNDRV_CTL_ELEM_IFACE_MIXER
- && k->access & SNDRV_CTL_ELEM_ACCESS_TLV_READWRITE
+ && (k->access & SNDRV_CTL_ELEM_ACCESS_TLV_READ
+ || k->access & SNDRV_CTL_ELEM_ACCESS_TLV_WRITE)
&& k->access & SNDRV_CTL_ELEM_ACCESS_TLV_CALLBACK) {
struct soc_bytes_ext *sbe;
struct snd_soc_tplg_bytes_control *be;
From: Paolo Valente <[email protected]>
[ Upstream commit 15729ff8143f8135b03988a100a19e66d7cb7ecd ]
A crash [1] happened to be triggered in conjunction with commit
2d52c58b9c9b ("block, bfq: honor already-setup queue merges"). The
latter was then reverted by commit ebc69e897e17 ("Revert "block, bfq:
honor already-setup queue merges""). Yet, the reverted commit was not
the one introducing the bug. In fact, it actually triggered a UAF
introduced by a different commit, and now fixed by commit d29bd41428cf
("block, bfq: reset last_bfqq_created on group change").
So, there is no point in keeping commit 2d52c58b9c9b ("block, bfq:
honor already-setup queue merges") out. This commit restores it.
[1] https://bugzilla.kernel.org/show_bug.cgi?id=214503
Reported-by: Holger Hoffstätte <[email protected]>
Signed-off-by: Paolo Valente <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
block/bfq-iosched.c | 16 +++++++++++++---
1 file changed, 13 insertions(+), 3 deletions(-)
diff --git a/block/bfq-iosched.c b/block/bfq-iosched.c
index 138541996dd5..de2cd4bd602f 100644
--- a/block/bfq-iosched.c
+++ b/block/bfq-iosched.c
@@ -2526,6 +2526,15 @@ bfq_setup_merge(struct bfq_queue *bfqq, struct bfq_queue *new_bfqq)
* are likely to increase the throughput.
*/
bfqq->new_bfqq = new_bfqq;
+ /*
+ * The above assignment schedules the following redirections:
+ * each time some I/O for bfqq arrives, the process that
+ * generated that I/O is disassociated from bfqq and
+ * associated with new_bfqq. Here we increases new_bfqq->ref
+ * in advance, adding the number of processes that are
+ * expected to be associated with new_bfqq as they happen to
+ * issue I/O.
+ */
new_bfqq->ref += process_refs;
return new_bfqq;
}
@@ -2585,6 +2594,10 @@ bfq_setup_cooperator(struct bfq_data *bfqd, struct bfq_queue *bfqq,
{
struct bfq_queue *in_service_bfqq, *new_bfqq;
+ /* if a merge has already been setup, then proceed with that first */
+ if (bfqq->new_bfqq)
+ return bfqq->new_bfqq;
+
/*
* Do not perform queue merging if the device is non
* rotational and performs internal queueing. In fact, such a
@@ -2639,9 +2652,6 @@ bfq_setup_cooperator(struct bfq_data *bfqd, struct bfq_queue *bfqq,
if (bfq_too_late_for_merging(bfqq))
return NULL;
- if (bfqq->new_bfqq)
- return bfqq->new_bfqq;
-
if (!io_struct || unlikely(bfqq == &bfqd->oom_bfqq))
return NULL;
--
2.34.1
From: Richard Guy Briggs <[email protected]>
[ Upstream commit 272ceeaea355214b301530e262a0df8600bfca95 ]
AUDIT_TIME_* events are generated when there are syscall rules present
that are not related to time keeping. This will produce noisy log
entries that could flood the logs and hide events we really care about.
Rather than immediately produce the AUDIT_TIME_* records, store the data
in the context and log it at syscall exit time respecting the filter
rules.
Note: This eats the audit_buffer, unlike any others in show_special().
Please see https://bugzilla.redhat.com/show_bug.cgi?id=1991919
Fixes: 7e8eda734d30 ("ntp: Audit NTP parameters adjustment")
Fixes: 2d87a0674bd6 ("timekeeping: Audit clock adjustments")
Signed-off-by: Richard Guy Briggs <[email protected]>
[PM: fixed style/whitespace issues]
Signed-off-by: Paul Moore <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/audit.h | 4 +++
kernel/auditsc.c | 87 +++++++++++++++++++++++++++++++++++++-----------
2 files changed, 71 insertions(+), 20 deletions(-)
diff --git a/kernel/audit.h b/kernel/audit.h
index 3b9c0945225a..1918019e6aaf 100644
--- a/kernel/audit.h
+++ b/kernel/audit.h
@@ -191,6 +191,10 @@ struct audit_context {
struct {
char *name;
} module;
+ struct {
+ struct audit_ntp_data ntp_data;
+ struct timespec64 tk_injoffset;
+ } time;
};
int fds[2];
struct audit_proctitle proctitle;
diff --git a/kernel/auditsc.c b/kernel/auditsc.c
index 638f424859ed..07e2788bbbf1 100644
--- a/kernel/auditsc.c
+++ b/kernel/auditsc.c
@@ -1214,6 +1214,53 @@ static void audit_log_fcaps(struct audit_buffer *ab, struct audit_names *name)
from_kuid(&init_user_ns, name->fcap.rootid));
}
+static void audit_log_time(struct audit_context *context, struct audit_buffer **ab)
+{
+ const struct audit_ntp_data *ntp = &context->time.ntp_data;
+ const struct timespec64 *tk = &context->time.tk_injoffset;
+ static const char * const ntp_name[] = {
+ "offset",
+ "freq",
+ "status",
+ "tai",
+ "tick",
+ "adjust",
+ };
+ int type;
+
+ if (context->type == AUDIT_TIME_ADJNTPVAL) {
+ for (type = 0; type < AUDIT_NTP_NVALS; type++) {
+ if (ntp->vals[type].newval != ntp->vals[type].oldval) {
+ if (!*ab) {
+ *ab = audit_log_start(context,
+ GFP_KERNEL,
+ AUDIT_TIME_ADJNTPVAL);
+ if (!*ab)
+ return;
+ }
+ audit_log_format(*ab, "op=%s old=%lli new=%lli",
+ ntp_name[type],
+ ntp->vals[type].oldval,
+ ntp->vals[type].newval);
+ audit_log_end(*ab);
+ *ab = NULL;
+ }
+ }
+ }
+ if (tk->tv_sec != 0 || tk->tv_nsec != 0) {
+ if (!*ab) {
+ *ab = audit_log_start(context, GFP_KERNEL,
+ AUDIT_TIME_INJOFFSET);
+ if (!*ab)
+ return;
+ }
+ audit_log_format(*ab, "sec=%lli nsec=%li",
+ (long long)tk->tv_sec, tk->tv_nsec);
+ audit_log_end(*ab);
+ *ab = NULL;
+ }
+}
+
static void show_special(struct audit_context *context, int *call_panic)
{
struct audit_buffer *ab;
@@ -1319,6 +1366,11 @@ static void show_special(struct audit_context *context, int *call_panic)
audit_log_format(ab, "(null)");
break;
+ case AUDIT_TIME_ADJNTPVAL:
+ case AUDIT_TIME_INJOFFSET:
+ /* this call deviates from the rest, eating the buffer */
+ audit_log_time(context, &ab);
+ break;
}
audit_log_end(ab);
}
@@ -2560,31 +2612,26 @@ void __audit_fanotify(unsigned int response)
void __audit_tk_injoffset(struct timespec64 offset)
{
- audit_log(audit_context(), GFP_KERNEL, AUDIT_TIME_INJOFFSET,
- "sec=%lli nsec=%li",
- (long long)offset.tv_sec, offset.tv_nsec);
-}
-
-static void audit_log_ntp_val(const struct audit_ntp_data *ad,
- const char *op, enum audit_ntp_type type)
-{
- const struct audit_ntp_val *val = &ad->vals[type];
-
- if (val->newval == val->oldval)
- return;
+ struct audit_context *context = audit_context();
- audit_log(audit_context(), GFP_KERNEL, AUDIT_TIME_ADJNTPVAL,
- "op=%s old=%lli new=%lli", op, val->oldval, val->newval);
+ /* only set type if not already set by NTP */
+ if (!context->type)
+ context->type = AUDIT_TIME_INJOFFSET;
+ memcpy(&context->time.tk_injoffset, &offset, sizeof(offset));
}
void __audit_ntp_log(const struct audit_ntp_data *ad)
{
- audit_log_ntp_val(ad, "offset", AUDIT_NTP_OFFSET);
- audit_log_ntp_val(ad, "freq", AUDIT_NTP_FREQ);
- audit_log_ntp_val(ad, "status", AUDIT_NTP_STATUS);
- audit_log_ntp_val(ad, "tai", AUDIT_NTP_TAI);
- audit_log_ntp_val(ad, "tick", AUDIT_NTP_TICK);
- audit_log_ntp_val(ad, "adjust", AUDIT_NTP_ADJUST);
+ struct audit_context *context = audit_context();
+ int type;
+
+ for (type = 0; type < AUDIT_NTP_NVALS; type++)
+ if (ad->vals[type].newval != ad->vals[type].oldval) {
+ /* unconditionally set type, overwriting TK */
+ context->type = AUDIT_TIME_ADJNTPVAL;
+ memcpy(&context->time.ntp_data, ad, sizeof(*ad));
+ break;
+ }
}
void __audit_log_nfcfg(const char *name, u8 af, unsigned int nentries,
--
2.34.1
From: Luca Weiss <[email protected]>
[ Upstream commit 4a8a77abf0e2b6468ba0281e33384cbec5fb476a ]
The fuse consists of 64 bits, with this statement we're supposed to get
the upper 32 bits but it actually read out of bounds and got 0 instead
of the desired value which lead to the "PVS bin not set." codepath being
run resetting our pvs value.
Fixes: a8811ec764f9 ("cpufreq: qcom: Add support for krait based socs")
Signed-off-by: Luca Weiss <[email protected]>
Signed-off-by: Viresh Kumar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/cpufreq/qcom-cpufreq-nvmem.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/cpufreq/qcom-cpufreq-nvmem.c b/drivers/cpufreq/qcom-cpufreq-nvmem.c
index fba9937a406b..7fdd30e92e42 100644
--- a/drivers/cpufreq/qcom-cpufreq-nvmem.c
+++ b/drivers/cpufreq/qcom-cpufreq-nvmem.c
@@ -130,7 +130,7 @@ static void get_krait_bin_format_b(struct device *cpu_dev,
}
/* Check PVS_BLOW_STATUS */
- pte_efuse = *(((u32 *)buf) + 4);
+ pte_efuse = *(((u32 *)buf) + 1);
pte_efuse &= BIT(21);
if (pte_efuse) {
dev_dbg(cpu_dev, "PVS bin: %d\n", *pvs);
--
2.34.1
From: Gwendal Grignou <[email protected]>
commit f97ec5d75e9261a5da78dc28a8955b7cc0c4468b upstream.
Allocating memory with kmalloc and GPF_DMA32 is not allowed, the
allocator will ignore the attribute.
Instead, use dma_alloc_coherent() API as we allocate a small amount of
memory to transfer firmware fragment to the ISH.
On Arcada chromebook, after the patch the warning:
"Unexpected gfp: 0x4 (GFP_DMA32). Fixing up to gfp: 0xcc0 (GFP_KERNEL). Fix your code!"
is gone. The ISH firmware is loaded properly and we can interact with
the ISH:
> ectool --name cros_ish version
...
Build info: arcada_ish_v2.0.3661+3c1a1c1ae0 2022-02-08 05:37:47 @localhost
Tool version: v2.0.12300-900b03ec7f 2022-02-08 10:01:48 @localhost
Fixes: commit 91b228107da3 ("HID: intel-ish-hid: ISH firmware loader client driver")
Signed-off-by: Gwendal Grignou <[email protected]>
Acked-by: Srinivas Pandruvada <[email protected]>
Cc: [email protected]
Signed-off-by: Jiri Kosina <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/hid/intel-ish-hid/ishtp-fw-loader.c | 29 ++--------------------------
1 file changed, 3 insertions(+), 26 deletions(-)
--- a/drivers/hid/intel-ish-hid/ishtp-fw-loader.c
+++ b/drivers/hid/intel-ish-hid/ishtp-fw-loader.c
@@ -656,21 +656,12 @@ static int ish_fw_xfer_direct_dma(struct
*/
payload_max_size &= ~(L1_CACHE_BYTES - 1);
- dma_buf = kmalloc(payload_max_size, GFP_KERNEL | GFP_DMA32);
+ dma_buf = dma_alloc_coherent(devc, payload_max_size, &dma_buf_phy, GFP_KERNEL);
if (!dma_buf) {
client_data->flag_retry = true;
return -ENOMEM;
}
- dma_buf_phy = dma_map_single(devc, dma_buf, payload_max_size,
- DMA_TO_DEVICE);
- if (dma_mapping_error(devc, dma_buf_phy)) {
- dev_err(cl_data_to_dev(client_data), "DMA map failed\n");
- client_data->flag_retry = true;
- rv = -ENOMEM;
- goto end_err_dma_buf_release;
- }
-
ldr_xfer_dma_frag.fragment.hdr.command = LOADER_CMD_XFER_FRAGMENT;
ldr_xfer_dma_frag.fragment.xfer_mode = LOADER_XFER_MODE_DIRECT_DMA;
ldr_xfer_dma_frag.ddr_phys_addr = (u64)dma_buf_phy;
@@ -690,14 +681,7 @@ static int ish_fw_xfer_direct_dma(struct
ldr_xfer_dma_frag.fragment.size = fragment_size;
memcpy(dma_buf, &fw->data[fragment_offset], fragment_size);
- dma_sync_single_for_device(devc, dma_buf_phy,
- payload_max_size,
- DMA_TO_DEVICE);
-
- /*
- * Flush cache here because the dma_sync_single_for_device()
- * does not do for x86.
- */
+ /* Flush cache to be sure the data is in main memory. */
clflush_cache_range(dma_buf, payload_max_size);
dev_dbg(cl_data_to_dev(client_data),
@@ -720,15 +704,8 @@ static int ish_fw_xfer_direct_dma(struct
fragment_offset += fragment_size;
}
- dma_unmap_single(devc, dma_buf_phy, payload_max_size, DMA_TO_DEVICE);
- kfree(dma_buf);
- return 0;
-
end_err_resp_buf_release:
- /* Free ISH buffer if not done already, in error case */
- dma_unmap_single(devc, dma_buf_phy, payload_max_size, DMA_TO_DEVICE);
-end_err_dma_buf_release:
- kfree(dma_buf);
+ dma_free_coherent(devc, payload_max_size, dma_buf, dma_buf_phy);
return rv;
}
From: Eric Biggers <[email protected]>
[ Upstream commit 0f69288253e9fc7c495047720e523b9f1aba5712 ]
kobjects aren't supposed to be deleted before their child kobjects are
deleted. Apparently this is usually benign; however, a WARN will be
triggered if one of the child kobjects has a named attribute group:
sysfs group 'modes' not found for kobject 'crypto'
WARNING: CPU: 0 PID: 1 at fs/sysfs/group.c:278 sysfs_remove_group+0x72/0x80
...
Call Trace:
sysfs_remove_groups+0x29/0x40 fs/sysfs/group.c:312
__kobject_del+0x20/0x80 lib/kobject.c:611
kobject_cleanup+0xa4/0x140 lib/kobject.c:696
kobject_release lib/kobject.c:736 [inline]
kref_put include/linux/kref.h:65 [inline]
kobject_put+0x53/0x70 lib/kobject.c:753
blk_crypto_sysfs_unregister+0x10/0x20 block/blk-crypto-sysfs.c:159
blk_unregister_queue+0xb0/0x110 block/blk-sysfs.c:962
del_gendisk+0x117/0x250 block/genhd.c:610
Fix this by moving the kobject_del() and the corresponding
kobject_uevent() to the correct place.
Fixes: 2c2086afc2b8 ("block: Protect less code with sysfs_lock in blk_{un,}register_queue()")
Reviewed-by: Hannes Reinecke <[email protected]>
Reviewed-by: Greg Kroah-Hartman <[email protected]>
Reviewed-by: Bart Van Assche <[email protected]>
Signed-off-by: Eric Biggers <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
block/blk-sysfs.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c
index b513f1683af0..8c5816364dd1 100644
--- a/block/blk-sysfs.c
+++ b/block/blk-sysfs.c
@@ -958,15 +958,17 @@ void blk_unregister_queue(struct gendisk *disk)
*/
if (queue_is_mq(q))
blk_mq_unregister_dev(disk_to_dev(disk), q);
-
- kobject_uevent(&q->kobj, KOBJ_REMOVE);
- kobject_del(&q->kobj);
blk_trace_remove_sysfs(disk_to_dev(disk));
mutex_lock(&q->sysfs_lock);
if (q->elevator)
elv_unregister_queue(q);
mutex_unlock(&q->sysfs_lock);
+
+ /* Now that we've deleted all child objects, we can delete the queue. */
+ kobject_uevent(&q->kobj, KOBJ_REMOVE);
+ kobject_del(&q->kobj);
+
mutex_unlock(&q->sysfs_dir_lock);
kobject_put(&disk_to_dev(disk)->kobj);
--
2.34.1
From: Damien Le Moal <[email protected]>
[ Upstream commit fd6d0e376211d7ed759db96b0fbd9a1cee67d462 ]
Make sure that the __le32 fields of struct sata_cmd are manipulated after
applying the correct endian conversion. That is, use cpu_to_le32() for
assigning values and le32_to_cpu() for consulting a field value. In
particular, make sure that the calculations for the 4G boundary check are
done using CPU endianness and *not* little endian values. With these fixes,
many sparse warnings are removed.
While at it, fix some code identation and add blank lines after variable
declarations and in some other places to make this code more readable.
Link: https://lore.kernel.org/r/[email protected]
Fixes: 0ecdf00ba6e5 ("[SCSI] pm80xx: 4G boundary fix.")
Reviewed-by: Jack Wang <[email protected]>
Signed-off-by: Damien Le Moal <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/pm8001/pm80xx_hwi.c | 82 ++++++++++++++++++--------------
1 file changed, 45 insertions(+), 37 deletions(-)
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c
index 33b5172d55cf..d620bb747a5b 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.c
+++ b/drivers/scsi/pm8001/pm80xx_hwi.c
@@ -4467,7 +4467,7 @@ static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
u32 q_index, cpu_id;
struct sata_start_req sata_cmd;
u32 hdr_tag, ncg_tag = 0;
- u64 phys_addr, start_addr, end_addr;
+ u64 phys_addr, end_addr;
u32 end_addr_high, end_addr_low;
u32 ATAP = 0x0;
u32 dir;
@@ -4528,32 +4528,38 @@ static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
pm8001_chip_make_sg(task->scatter,
ccb->n_elem, ccb->buf_prd);
phys_addr = ccb->ccb_dma_handle;
- sata_cmd.enc_addr_low = lower_32_bits(phys_addr);
- sata_cmd.enc_addr_high = upper_32_bits(phys_addr);
+ sata_cmd.enc_addr_low =
+ cpu_to_le32(lower_32_bits(phys_addr));
+ sata_cmd.enc_addr_high =
+ cpu_to_le32(upper_32_bits(phys_addr));
sata_cmd.enc_esgl = cpu_to_le32(1 << 31);
} else if (task->num_scatter == 1) {
u64 dma_addr = sg_dma_address(task->scatter);
- sata_cmd.enc_addr_low = lower_32_bits(dma_addr);
- sata_cmd.enc_addr_high = upper_32_bits(dma_addr);
+
+ sata_cmd.enc_addr_low =
+ cpu_to_le32(lower_32_bits(dma_addr));
+ sata_cmd.enc_addr_high =
+ cpu_to_le32(upper_32_bits(dma_addr));
sata_cmd.enc_len = cpu_to_le32(task->total_xfer_len);
sata_cmd.enc_esgl = 0;
+
/* Check 4G Boundary */
- start_addr = cpu_to_le64(dma_addr);
- end_addr = (start_addr + sata_cmd.enc_len) - 1;
- end_addr_low = cpu_to_le32(lower_32_bits(end_addr));
- end_addr_high = cpu_to_le32(upper_32_bits(end_addr));
- if (end_addr_high != sata_cmd.enc_addr_high) {
+ end_addr = dma_addr + le32_to_cpu(sata_cmd.enc_len) - 1;
+ end_addr_low = lower_32_bits(end_addr);
+ end_addr_high = upper_32_bits(end_addr);
+ if (end_addr_high != le32_to_cpu(sata_cmd.enc_addr_high)) {
pm8001_dbg(pm8001_ha, FAIL,
"The sg list address start_addr=0x%016llx data_len=0x%x end_addr_high=0x%08x end_addr_low=0x%08x has crossed 4G boundary\n",
- start_addr, sata_cmd.enc_len,
+ dma_addr,
+ le32_to_cpu(sata_cmd.enc_len),
end_addr_high, end_addr_low);
pm8001_chip_make_sg(task->scatter, 1,
ccb->buf_prd);
phys_addr = ccb->ccb_dma_handle;
sata_cmd.enc_addr_low =
- lower_32_bits(phys_addr);
+ cpu_to_le32(lower_32_bits(phys_addr));
sata_cmd.enc_addr_high =
- upper_32_bits(phys_addr);
+ cpu_to_le32(upper_32_bits(phys_addr));
sata_cmd.enc_esgl =
cpu_to_le32(1 << 31);
}
@@ -4564,7 +4570,8 @@ static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
sata_cmd.enc_esgl = 0;
}
/* XTS mode. All other fields are 0 */
- sata_cmd.key_index_mode = 0x6 << 4;
+ sata_cmd.key_index_mode = cpu_to_le32(0x6 << 4);
+
/* set tweak values. Should be the start lba */
sata_cmd.twk_val0 =
cpu_to_le32((sata_cmd.sata_fis.lbal_exp << 24) |
@@ -4590,31 +4597,31 @@ static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
phys_addr = ccb->ccb_dma_handle;
sata_cmd.addr_low = lower_32_bits(phys_addr);
sata_cmd.addr_high = upper_32_bits(phys_addr);
- sata_cmd.esgl = cpu_to_le32(1 << 31);
+ sata_cmd.esgl = cpu_to_le32(1U << 31);
} else if (task->num_scatter == 1) {
u64 dma_addr = sg_dma_address(task->scatter);
+
sata_cmd.addr_low = lower_32_bits(dma_addr);
sata_cmd.addr_high = upper_32_bits(dma_addr);
sata_cmd.len = cpu_to_le32(task->total_xfer_len);
sata_cmd.esgl = 0;
+
/* Check 4G Boundary */
- start_addr = cpu_to_le64(dma_addr);
- end_addr = (start_addr + sata_cmd.len) - 1;
- end_addr_low = cpu_to_le32(lower_32_bits(end_addr));
- end_addr_high = cpu_to_le32(upper_32_bits(end_addr));
+ end_addr = dma_addr + le32_to_cpu(sata_cmd.len) - 1;
+ end_addr_low = lower_32_bits(end_addr);
+ end_addr_high = upper_32_bits(end_addr);
if (end_addr_high != sata_cmd.addr_high) {
pm8001_dbg(pm8001_ha, FAIL,
"The sg list address start_addr=0x%016llx data_len=0x%xend_addr_high=0x%08x end_addr_low=0x%08x has crossed 4G boundary\n",
- start_addr, sata_cmd.len,
+ dma_addr,
+ le32_to_cpu(sata_cmd.len),
end_addr_high, end_addr_low);
pm8001_chip_make_sg(task->scatter, 1,
ccb->buf_prd);
phys_addr = ccb->ccb_dma_handle;
- sata_cmd.addr_low =
- lower_32_bits(phys_addr);
- sata_cmd.addr_high =
- upper_32_bits(phys_addr);
- sata_cmd.esgl = cpu_to_le32(1 << 31);
+ sata_cmd.addr_low = lower_32_bits(phys_addr);
+ sata_cmd.addr_high = upper_32_bits(phys_addr);
+ sata_cmd.esgl = cpu_to_le32(1U << 31);
}
} else if (task->num_scatter == 0) {
sata_cmd.addr_low = 0;
@@ -4622,27 +4629,28 @@ static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
sata_cmd.len = cpu_to_le32(task->total_xfer_len);
sata_cmd.esgl = 0;
}
+
/* scsi cdb */
sata_cmd.atapi_scsi_cdb[0] =
cpu_to_le32(((task->ata_task.atapi_packet[0]) |
- (task->ata_task.atapi_packet[1] << 8) |
- (task->ata_task.atapi_packet[2] << 16) |
- (task->ata_task.atapi_packet[3] << 24)));
+ (task->ata_task.atapi_packet[1] << 8) |
+ (task->ata_task.atapi_packet[2] << 16) |
+ (task->ata_task.atapi_packet[3] << 24)));
sata_cmd.atapi_scsi_cdb[1] =
cpu_to_le32(((task->ata_task.atapi_packet[4]) |
- (task->ata_task.atapi_packet[5] << 8) |
- (task->ata_task.atapi_packet[6] << 16) |
- (task->ata_task.atapi_packet[7] << 24)));
+ (task->ata_task.atapi_packet[5] << 8) |
+ (task->ata_task.atapi_packet[6] << 16) |
+ (task->ata_task.atapi_packet[7] << 24)));
sata_cmd.atapi_scsi_cdb[2] =
cpu_to_le32(((task->ata_task.atapi_packet[8]) |
- (task->ata_task.atapi_packet[9] << 8) |
- (task->ata_task.atapi_packet[10] << 16) |
- (task->ata_task.atapi_packet[11] << 24)));
+ (task->ata_task.atapi_packet[9] << 8) |
+ (task->ata_task.atapi_packet[10] << 16) |
+ (task->ata_task.atapi_packet[11] << 24)));
sata_cmd.atapi_scsi_cdb[3] =
cpu_to_le32(((task->ata_task.atapi_packet[12]) |
- (task->ata_task.atapi_packet[13] << 8) |
- (task->ata_task.atapi_packet[14] << 16) |
- (task->ata_task.atapi_packet[15] << 24)));
+ (task->ata_task.atapi_packet[13] << 8) |
+ (task->ata_task.atapi_packet[14] << 16) |
+ (task->ata_task.atapi_packet[15] << 24)));
}
/* Check for read log for failed drive and return */
--
2.34.1
From: Baokun Li <[email protected]>
commit d051cef784de4d54835f6b6836d98a8f6935772c upstream.
If jffs2_build_filesystem() in jffs2_do_mount_fs() returns an error,
we can observe the following kmemleak report:
--------------------------------------------
unreferenced object 0xffff88811b25a640 (size 64):
comm "mount", pid 691, jiffies 4294957728 (age 71.952s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffffa493be24>] kmem_cache_alloc_trace+0x584/0x880
[<ffffffffa5423a06>] jffs2_sum_init+0x86/0x130
[<ffffffffa5400e58>] jffs2_do_mount_fs+0x798/0xac0
[<ffffffffa540acf3>] jffs2_do_fill_super+0x383/0xc30
[<ffffffffa540c00a>] jffs2_fill_super+0x2ea/0x4c0
[...]
unreferenced object 0xffff88812c760000 (size 65536):
comm "mount", pid 691, jiffies 4294957728 (age 71.952s)
hex dump (first 32 bytes):
bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................
bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................
backtrace:
[<ffffffffa493a449>] __kmalloc+0x6b9/0x910
[<ffffffffa5423a57>] jffs2_sum_init+0xd7/0x130
[<ffffffffa5400e58>] jffs2_do_mount_fs+0x798/0xac0
[<ffffffffa540acf3>] jffs2_do_fill_super+0x383/0xc30
[<ffffffffa540c00a>] jffs2_fill_super+0x2ea/0x4c0
[...]
--------------------------------------------
This is because the resources allocated in jffs2_sum_init() are not
released. Call jffs2_sum_exit() to release these resources to solve
the problem.
Fixes: e631ddba5887 ("[JFFS2] Add erase block summary support (mount time improvement)")
Cc: [email protected]
Signed-off-by: Baokun Li <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/jffs2/build.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/fs/jffs2/build.c
+++ b/fs/jffs2/build.c
@@ -415,13 +415,15 @@ int jffs2_do_mount_fs(struct jffs2_sb_in
jffs2_free_ino_caches(c);
jffs2_free_raw_node_refs(c);
ret = -EIO;
- goto out_free;
+ goto out_sum_exit;
}
jffs2_calc_trigger_levels(c);
return 0;
+ out_sum_exit:
+ jffs2_sum_exit(c);
out_free:
kvfree(c->blocks);
From: Gilad Ben-Yossef <[email protected]>
[ Upstream commit 1fb37b5692c915edcc2448a6b37255738c7c77e0 ]
Refuse to try mapping zero bytes as this may cause a fault
on some configurations / platforms and it seems the prev.
attempt is not enough and we need to be more explicit.
Signed-off-by: Gilad Ben-Yossef <[email protected]>
Reported-by: Corentin Labbe <[email protected]>
Fixes: ce0fc6db38de ("crypto: ccree - protect against empty or NULL
scatterlists")
Tested-by: Corentin Labbe <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/crypto/ccree/cc_buffer_mgr.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/crypto/ccree/cc_buffer_mgr.c b/drivers/crypto/ccree/cc_buffer_mgr.c
index a5e041d9d2cf..11e0278c8631 100644
--- a/drivers/crypto/ccree/cc_buffer_mgr.c
+++ b/drivers/crypto/ccree/cc_buffer_mgr.c
@@ -258,6 +258,13 @@ static int cc_map_sg(struct device *dev, struct scatterlist *sg,
{
int ret = 0;
+ if (!nbytes) {
+ *mapped_nents = 0;
+ *lbytes = 0;
+ *nents = 0;
+ return 0;
+ }
+
*nents = cc_get_sgl_nents(dev, sg, nbytes, lbytes);
if (*nents > max_sg_nents) {
*nents = 0;
--
2.34.1
From: Arnd Bergmann <[email protected]>
[ Upstream commit 5a06fcb15b43d1f7bf740c672950122331cb5655 ]
test_kernel_ptr() uses access_ok() to figure out if a given address
points to user space instead of kernel space. However on architectures
that set CONFIG_ALTERNATE_USER_ADDRESS_SPACE, a pointer can be valid
for both, and the check always fails because access_ok() returns true.
Make the check for user space pointers conditional on the type of
address space layout.
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
lib/test_lockup.c | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
diff --git a/lib/test_lockup.c b/lib/test_lockup.c
index 07f476317187..78a630bbd03d 100644
--- a/lib/test_lockup.c
+++ b/lib/test_lockup.c
@@ -417,9 +417,14 @@ static bool test_kernel_ptr(unsigned long addr, int size)
return false;
/* should be at least readable kernel address */
- if (access_ok((void __user *)ptr, 1) ||
- access_ok((void __user *)ptr + size - 1, 1) ||
- get_kernel_nofault(buf, ptr) ||
+ if (!IS_ENABLED(CONFIG_ALTERNATE_USER_ADDRESS_SPACE) &&
+ (access_ok((void __user *)ptr, 1) ||
+ access_ok((void __user *)ptr + size - 1, 1))) {
+ pr_err("user space ptr invalid in kernel: %#lx\n", addr);
+ return true;
+ }
+
+ if (get_kernel_nofault(buf, ptr) ||
get_kernel_nofault(buf, ptr + size - 1)) {
pr_err("invalid kernel ptr: %#lx\n", addr);
return true;
--
2.34.1
From: John David Anglin <[email protected]>
[ Upstream commit e00b0a2ab8ec019c344e53bfc76e31c18bb587b7 ]
Currently, the parisc kernel does not fully support non-access TLB
fault handling for probe instructions. In the fast path, we set the
target register to zero if it is not a shadowed register. The slow
path is not implemented, so we call do_page_fault. The architecture
indicates that non-access faults should not cause a page fault from
disk.
This change adds to code to provide non-access fault support for
probe instructions. It also modifies the handling of faults on
userspace so that if the address lies in a valid VMA and the access
type matches that for the VMA, the probe target register is set to
one. Otherwise, the target register is set to zero.
This was done to make probe instructions more useful for userspace.
Probe instructions are not very useful if they set the target register
to zero whenever a page is not present in memory. Nominally, the
purpose of the probe instruction is determine whether read or write
access to a given address is allowed.
This fixes a problem in function pointer comparison noticed in the
glibc testsuite (stdio-common/tst-vfprintf-user-type). The same
problem is likely in glibc (_dl_lookup_address).
V2 adds flush and lpa instruction support to handle_nadtlb_fault.
Signed-off-by: John David Anglin <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/parisc/include/asm/traps.h | 1 +
arch/parisc/kernel/traps.c | 2 +
arch/parisc/mm/fault.c | 89 +++++++++++++++++++++++++++++++++
3 files changed, 92 insertions(+)
diff --git a/arch/parisc/include/asm/traps.h b/arch/parisc/include/asm/traps.h
index 8ecc1f0c0483..d0e090a2c000 100644
--- a/arch/parisc/include/asm/traps.h
+++ b/arch/parisc/include/asm/traps.h
@@ -17,6 +17,7 @@ void die_if_kernel(char *str, struct pt_regs *regs, long err);
const char *trap_name(unsigned long code);
void do_page_fault(struct pt_regs *regs, unsigned long code,
unsigned long address);
+int handle_nadtlb_fault(struct pt_regs *regs);
#endif
#endif
diff --git a/arch/parisc/kernel/traps.c b/arch/parisc/kernel/traps.c
index 269b737d2629..bce47e0fb692 100644
--- a/arch/parisc/kernel/traps.c
+++ b/arch/parisc/kernel/traps.c
@@ -661,6 +661,8 @@ void notrace handle_interruption(int code, struct pt_regs *regs)
by hand. Technically we need to emulate:
fdc,fdce,pdc,"fic,4f",prober,probeir,probew, probeiw
*/
+ if (code == 17 && handle_nadtlb_fault(regs))
+ return;
fault_address = regs->ior;
fault_space = regs->isr;
break;
diff --git a/arch/parisc/mm/fault.c b/arch/parisc/mm/fault.c
index 716960f5d92e..5faa3cff4738 100644
--- a/arch/parisc/mm/fault.c
+++ b/arch/parisc/mm/fault.c
@@ -424,3 +424,92 @@ void do_page_fault(struct pt_regs *regs, unsigned long code,
goto no_context;
pagefault_out_of_memory();
}
+
+/* Handle non-access data TLB miss faults.
+ *
+ * For probe instructions, accesses to userspace are considered allowed
+ * if they lie in a valid VMA and the access type matches. We are not
+ * allowed to handle MM faults here so there may be situations where an
+ * actual access would fail even though a probe was successful.
+ */
+int
+handle_nadtlb_fault(struct pt_regs *regs)
+{
+ unsigned long insn = regs->iir;
+ int breg, treg, xreg, val = 0;
+ struct vm_area_struct *vma, *prev_vma;
+ struct task_struct *tsk;
+ struct mm_struct *mm;
+ unsigned long address;
+ unsigned long acc_type;
+
+ switch (insn & 0x380) {
+ case 0x280:
+ /* FDC instruction */
+ fallthrough;
+ case 0x380:
+ /* PDC and FIC instructions */
+ if (printk_ratelimit()) {
+ pr_warn("BUG: nullifying cache flush/purge instruction\n");
+ show_regs(regs);
+ }
+ if (insn & 0x20) {
+ /* Base modification */
+ breg = (insn >> 21) & 0x1f;
+ xreg = (insn >> 16) & 0x1f;
+ if (breg && xreg)
+ regs->gr[breg] += regs->gr[xreg];
+ }
+ regs->gr[0] |= PSW_N;
+ return 1;
+
+ case 0x180:
+ /* PROBE instruction */
+ treg = insn & 0x1f;
+ if (regs->isr) {
+ tsk = current;
+ mm = tsk->mm;
+ if (mm) {
+ /* Search for VMA */
+ address = regs->ior;
+ mmap_read_lock(mm);
+ vma = find_vma_prev(mm, address, &prev_vma);
+ mmap_read_unlock(mm);
+
+ /*
+ * Check if access to the VMA is okay.
+ * We don't allow for stack expansion.
+ */
+ acc_type = (insn & 0x40) ? VM_WRITE : VM_READ;
+ if (vma
+ && address >= vma->vm_start
+ && (vma->vm_flags & acc_type) == acc_type)
+ val = 1;
+ }
+ }
+ if (treg)
+ regs->gr[treg] = val;
+ regs->gr[0] |= PSW_N;
+ return 1;
+
+ case 0x300:
+ /* LPA instruction */
+ if (insn & 0x20) {
+ /* Base modification */
+ breg = (insn >> 21) & 0x1f;
+ xreg = (insn >> 16) & 0x1f;
+ if (breg && xreg)
+ regs->gr[breg] += regs->gr[xreg];
+ }
+ treg = insn & 0x1f;
+ if (treg)
+ regs->gr[treg] = 0;
+ regs->gr[0] |= PSW_N;
+ return 1;
+
+ default:
+ break;
+ }
+
+ return 0;
+}
--
2.34.1
From: Pavel Skripkin <[email protected]>
[ Upstream commit 2b6dd600dd72573c23ea180b5b0b2f1813405882 ]
Syzbot has reported GPF in sg_alloc_append_table_from_pages(). The
problem was in ubuf->pages == ZERO_PTR.
ubuf->pagecount is calculated from arguments passed from user-space. If
user creates udmabuf with list.size == 0 then ubuf->pagecount will be
also equal to zero; it causes kmalloc_array() to return ZERO_PTR.
Fix it by validating ubuf->pagecount before passing it to
kmalloc_array().
Fixes: fbb0de795078 ("Add udmabuf misc device")
Reported-and-tested-by: [email protected]
Signed-off-by: Pavel Skripkin <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Gerd Hoffmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/dma-buf/udmabuf.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/dma-buf/udmabuf.c b/drivers/dma-buf/udmabuf.c
index db732f71e59a..cfbf10128aae 100644
--- a/drivers/dma-buf/udmabuf.c
+++ b/drivers/dma-buf/udmabuf.c
@@ -181,6 +181,10 @@ static long udmabuf_create(struct miscdevice *device,
if (ubuf->pagecount > pglimit)
goto err;
}
+
+ if (!ubuf->pagecount)
+ goto err;
+
ubuf->pages = kmalloc_array(ubuf->pagecount, sizeof(*ubuf->pages),
GFP_KERNEL);
if (!ubuf->pages) {
--
2.34.1
From: Dongliang Mu <[email protected]>
[ Upstream commit 714fbf2647b1a33d914edd695d4da92029c7e7c0 ]
ntfs_read_inode_mount invokes ntfs_malloc_nofs with zero allocation
size. It triggers one BUG in the __ntfs_malloc function.
Fix this by adding sanity check on ni->attr_list_size.
Link: https://lkml.kernel.org/r/[email protected]
Reported-by: [email protected]
Signed-off-by: Dongliang Mu <[email protected]>
Acked-by: Anton Altaparmakov <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/ntfs/inode.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/fs/ntfs/inode.c b/fs/ntfs/inode.c
index ea18e4a2a691..cf222c9225d6 100644
--- a/fs/ntfs/inode.c
+++ b/fs/ntfs/inode.c
@@ -1881,6 +1881,10 @@ int ntfs_read_inode_mount(struct inode *vi)
}
/* Now allocate memory for the attribute list. */
ni->attr_list_size = (u32)ntfs_attr_size(a);
+ if (!ni->attr_list_size) {
+ ntfs_error(sb, "Attr_list_size is zero");
+ goto put_err_out;
+ }
ni->attr_list = ntfs_malloc_nofs(ni->attr_list_size);
if (!ni->attr_list) {
ntfs_error(sb, "Not enough memory to allocate buffer "
--
2.34.1
From: Chen-Yu Tsai <[email protected]>
[ Upstream commit 3e8c6bc608480010f360c4a59578d7841726137d ]
When reading back pin bias settings, if the pin is not in the
corresponding bias state, the function should return -EINVAL.
Fix this in the mediatek-paris pinctrl library so that the read back
state is not littered with bogus a "input bias disabled" combined with
"pull up" or "pull down" states.
Fixes: 805250982bb5 ("pinctrl: mediatek: add pinctrl-paris that implements the vendor dt-bindings")
Signed-off-by: Chen-Yu Tsai <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pinctrl/mediatek/pinctrl-paris.c | 16 ++++++----------
1 file changed, 6 insertions(+), 10 deletions(-)
diff --git a/drivers/pinctrl/mediatek/pinctrl-paris.c b/drivers/pinctrl/mediatek/pinctrl-paris.c
index 623af4410b07..4dd5bd2f135e 100644
--- a/drivers/pinctrl/mediatek/pinctrl-paris.c
+++ b/drivers/pinctrl/mediatek/pinctrl-paris.c
@@ -96,20 +96,16 @@ static int mtk_pinconf_get(struct pinctrl_dev *pctldev,
err = hw->soc->bias_get_combo(hw, desc, &pullup, &ret);
if (err)
goto out;
+ if (ret == MTK_PUPD_SET_R1R0_00)
+ ret = MTK_DISABLE;
if (param == PIN_CONFIG_BIAS_DISABLE) {
- if (ret == MTK_PUPD_SET_R1R0_00)
- ret = MTK_DISABLE;
+ if (ret != MTK_DISABLE)
+ err = -EINVAL;
} else if (param == PIN_CONFIG_BIAS_PULL_UP) {
- /* When desire to get pull-up value, return
- * error if current setting is pull-down
- */
- if (!pullup)
+ if (!pullup || ret == MTK_DISABLE)
err = -EINVAL;
} else if (param == PIN_CONFIG_BIAS_PULL_DOWN) {
- /* When desire to get pull-down value, return
- * error if current setting is pull-up
- */
- if (pullup)
+ if (pullup || ret == MTK_DISABLE)
err = -EINVAL;
}
} else {
--
2.34.1
From: Randy Dunlap <[email protected]>
[ Upstream commit 80e4390981618e290616dbd06ea190d4576f219d ]
When valid kernel command line parameters
dma_debug=off dma_debug_entries=100
are used, they are reported as Unknown parameters and added to init's
environment strings, polluting it.
Unknown kernel command line parameters "BOOT_IMAGE=/boot/bzImage-517rc5
dma_debug=off dma_debug_entries=100", will be passed to user space.
and
Run /sbin/init as init process
with arguments:
/sbin/init
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/boot/bzImage-517rc5
dma_debug=off
dma_debug_entries=100
Return 1 from these __setup handlers to indicate that the command line
option has been handled.
Fixes: 59d3daafa1726 ("dma-debug: add kernel command line parameters")
Signed-off-by: Randy Dunlap <[email protected]>
Reported-by: Igor Zhbanov <[email protected]>
Link: lore.kernel.org/r/[email protected]
Cc: Joerg Roedel <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Marek Szyprowski <[email protected]>
Cc: [email protected]
Cc: Robin Murphy <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/dma/debug.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/kernel/dma/debug.c b/kernel/dma/debug.c
index 10d07ace46c1..f8ae54679865 100644
--- a/kernel/dma/debug.c
+++ b/kernel/dma/debug.c
@@ -928,7 +928,7 @@ static __init int dma_debug_cmdline(char *str)
global_disable = true;
}
- return 0;
+ return 1;
}
static __init int dma_debug_entries_cmdline(char *str)
@@ -937,7 +937,7 @@ static __init int dma_debug_entries_cmdline(char *str)
return -EINVAL;
if (!get_option(&str, &nr_prealloc_entries))
nr_prealloc_entries = PREALLOC_DMA_DEBUG_ENTRIES;
- return 0;
+ return 1;
}
__setup("dma_debug=", dma_debug_cmdline);
--
2.34.1
From: Armin Wolf <[email protected]>
[ Upstream commit 647d6f09bea7dacf4cdb6d4ea7e3051883955297 ]
If the watchdog was already enabled by the BIOS after booting, the
watchdog infrastructure needs to regularly send keepalives to
prevent a unexpected reset.
WDOG_ACTIVE only serves as an status indicator for userspace,
we want to use WDOG_HW_RUNNING instead.
Since my Fujitsu Esprimo P720 does not support the watchdog,
this change is compile-tested only.
Suggested-by: Guenter Roeck <[email protected]>
Fixes: fb551405c0f8 (watchdog: sch56xx: Use watchdog core)
Signed-off-by: Armin Wolf <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Hans de Goede <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hwmon/sch56xx-common.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/hwmon/sch56xx-common.c b/drivers/hwmon/sch56xx-common.c
index 6c84780e358e..066b12990fbf 100644
--- a/drivers/hwmon/sch56xx-common.c
+++ b/drivers/hwmon/sch56xx-common.c
@@ -424,7 +424,7 @@ struct sch56xx_watchdog_data *sch56xx_watchdog_register(struct device *parent,
if (nowayout)
set_bit(WDOG_NO_WAY_OUT, &data->wddev.status);
if (output_enable & SCH56XX_WDOG_OUTPUT_ENABLE)
- set_bit(WDOG_ACTIVE, &data->wddev.status);
+ set_bit(WDOG_HW_RUNNING, &data->wddev.status);
/* Since the watchdog uses a downcounter there is no register to read
the BIOS set timeout from (if any was set at all) ->
--
2.34.1
From: Arnd Bergmann <[email protected]>
[ Upstream commit 23fc539e81295b14b50c6ccc5baeb4f3d59d822d ]
On some architectures, access_ok() does not do any argument type
checking, so replacing the definition with a generic one causes
a few warnings for harmless issues that were never caught before.
Fix the ones that I found either through my own test builds or
that were reported by the 0-day bot.
Reported-by: kernel test robot <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Acked-by: Dinh Nguyen <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arc/kernel/process.c | 2 +-
arch/arm/kernel/swp_emulate.c | 2 +-
arch/arm/kernel/traps.c | 2 +-
arch/csky/kernel/perf_callchain.c | 2 +-
arch/csky/kernel/signal.c | 2 +-
arch/nios2/kernel/signal.c | 20 +++++++++++---------
arch/powerpc/lib/sstep.c | 4 ++--
arch/riscv/kernel/perf_callchain.c | 4 ++--
arch/sparc/kernel/signal_32.c | 2 +-
lib/test_lockup.c | 4 ++--
10 files changed, 23 insertions(+), 21 deletions(-)
diff --git a/arch/arc/kernel/process.c b/arch/arc/kernel/process.c
index 37f724ad5e39..a85e9c625ab5 100644
--- a/arch/arc/kernel/process.c
+++ b/arch/arc/kernel/process.c
@@ -43,7 +43,7 @@ SYSCALL_DEFINE0(arc_gettls)
return task_thread_info(current)->thr_ptr;
}
-SYSCALL_DEFINE3(arc_usr_cmpxchg, int *, uaddr, int, expected, int, new)
+SYSCALL_DEFINE3(arc_usr_cmpxchg, int __user *, uaddr, int, expected, int, new)
{
struct pt_regs *regs = current_pt_regs();
u32 uval;
diff --git a/arch/arm/kernel/swp_emulate.c b/arch/arm/kernel/swp_emulate.c
index 6166ba38bf99..b74bfcf94fb1 100644
--- a/arch/arm/kernel/swp_emulate.c
+++ b/arch/arm/kernel/swp_emulate.c
@@ -195,7 +195,7 @@ static int swp_handler(struct pt_regs *regs, unsigned int instr)
destreg, EXTRACT_REG_NUM(instr, RT2_OFFSET), data);
/* Check access in reasonable access range for both SWP and SWPB */
- if (!access_ok((address & ~3), 4)) {
+ if (!access_ok((void __user *)(address & ~3), 4)) {
pr_debug("SWP{B} emulation: access to %p not allowed!\n",
(void *)address);
res = -EFAULT;
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index 2d9e72ad1b0f..a531afad87fd 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -589,7 +589,7 @@ do_cache_op(unsigned long start, unsigned long end, int flags)
if (end < start || flags)
return -EINVAL;
- if (!access_ok(start, end - start))
+ if (!access_ok((void __user *)start, end - start))
return -EFAULT;
return __do_cache_op(start, end);
diff --git a/arch/csky/kernel/perf_callchain.c b/arch/csky/kernel/perf_callchain.c
index 35318a635a5f..75e1f9df5f60 100644
--- a/arch/csky/kernel/perf_callchain.c
+++ b/arch/csky/kernel/perf_callchain.c
@@ -49,7 +49,7 @@ static unsigned long user_backtrace(struct perf_callchain_entry_ctx *entry,
{
struct stackframe buftail;
unsigned long lr = 0;
- unsigned long *user_frame_tail = (unsigned long *)fp;
+ unsigned long __user *user_frame_tail = (unsigned long __user *)fp;
/* Check accessibility of one struct frame_tail beyond */
if (!access_ok(user_frame_tail, sizeof(buftail)))
diff --git a/arch/csky/kernel/signal.c b/arch/csky/kernel/signal.c
index 0ca49b5e3dd3..243228b0aa07 100644
--- a/arch/csky/kernel/signal.c
+++ b/arch/csky/kernel/signal.c
@@ -136,7 +136,7 @@ static inline void __user *get_sigframe(struct ksignal *ksig,
static int
setup_rt_frame(struct ksignal *ksig, sigset_t *set, struct pt_regs *regs)
{
- struct rt_sigframe *frame;
+ struct rt_sigframe __user *frame;
int err = 0;
struct csky_vdso *vdso = current->mm->context.vdso;
diff --git a/arch/nios2/kernel/signal.c b/arch/nios2/kernel/signal.c
index cf2dca2ac7c3..e45491d1d3e4 100644
--- a/arch/nios2/kernel/signal.c
+++ b/arch/nios2/kernel/signal.c
@@ -36,10 +36,10 @@ struct rt_sigframe {
static inline int rt_restore_ucontext(struct pt_regs *regs,
struct switch_stack *sw,
- struct ucontext *uc, int *pr2)
+ struct ucontext __user *uc, int *pr2)
{
int temp;
- unsigned long *gregs = uc->uc_mcontext.gregs;
+ unsigned long __user *gregs = uc->uc_mcontext.gregs;
int err;
/* Always make any pending restarted system calls return -EINTR */
@@ -102,10 +102,11 @@ asmlinkage int do_rt_sigreturn(struct switch_stack *sw)
{
struct pt_regs *regs = (struct pt_regs *)(sw + 1);
/* Verify, can we follow the stack back */
- struct rt_sigframe *frame = (struct rt_sigframe *) regs->sp;
+ struct rt_sigframe __user *frame;
sigset_t set;
int rval;
+ frame = (struct rt_sigframe __user *) regs->sp;
if (!access_ok(frame, sizeof(*frame)))
goto badframe;
@@ -124,10 +125,10 @@ asmlinkage int do_rt_sigreturn(struct switch_stack *sw)
return 0;
}
-static inline int rt_setup_ucontext(struct ucontext *uc, struct pt_regs *regs)
+static inline int rt_setup_ucontext(struct ucontext __user *uc, struct pt_regs *regs)
{
struct switch_stack *sw = (struct switch_stack *)regs - 1;
- unsigned long *gregs = uc->uc_mcontext.gregs;
+ unsigned long __user *gregs = uc->uc_mcontext.gregs;
int err = 0;
err |= __put_user(MCONTEXT_VERSION, &uc->uc_mcontext.version);
@@ -162,8 +163,9 @@ static inline int rt_setup_ucontext(struct ucontext *uc, struct pt_regs *regs)
return err;
}
-static inline void *get_sigframe(struct ksignal *ksig, struct pt_regs *regs,
- size_t frame_size)
+static inline void __user *get_sigframe(struct ksignal *ksig,
+ struct pt_regs *regs,
+ size_t frame_size)
{
unsigned long usp;
@@ -174,13 +176,13 @@ static inline void *get_sigframe(struct ksignal *ksig, struct pt_regs *regs,
usp = sigsp(usp, ksig);
/* Verify, is it 32 or 64 bit aligned */
- return (void *)((usp - frame_size) & -8UL);
+ return (void __user *)((usp - frame_size) & -8UL);
}
static int setup_rt_frame(struct ksignal *ksig, sigset_t *set,
struct pt_regs *regs)
{
- struct rt_sigframe *frame;
+ struct rt_sigframe __user *frame;
int err = 0;
frame = get_sigframe(ksig, regs, sizeof(*frame));
diff --git a/arch/powerpc/lib/sstep.c b/arch/powerpc/lib/sstep.c
index 0edebbbffcdc..42701b2f2474 100644
--- a/arch/powerpc/lib/sstep.c
+++ b/arch/powerpc/lib/sstep.c
@@ -108,9 +108,9 @@ static nokprobe_inline long address_ok(struct pt_regs *regs,
{
if (!user_mode(regs))
return 1;
- if (__access_ok(ea, nb))
+ if (access_ok((void __user *)ea, nb))
return 1;
- if (__access_ok(ea, 1))
+ if (access_ok((void __user *)ea, 1))
/* Access overlaps the end of the user region */
regs->dar = TASK_SIZE_MAX - 1;
else
diff --git a/arch/riscv/kernel/perf_callchain.c b/arch/riscv/kernel/perf_callchain.c
index 20af8ecbb7e4..fb02811df714 100644
--- a/arch/riscv/kernel/perf_callchain.c
+++ b/arch/riscv/kernel/perf_callchain.c
@@ -19,8 +19,8 @@ static unsigned long user_backtrace(struct perf_callchain_entry_ctx *entry,
{
struct stackframe buftail;
unsigned long ra = 0;
- unsigned long *user_frame_tail =
- (unsigned long *)(fp - sizeof(struct stackframe));
+ unsigned long __user *user_frame_tail =
+ (unsigned long __user *)(fp - sizeof(struct stackframe));
/* Check accessibility of one struct frame_tail beyond */
if (!access_ok(user_frame_tail, sizeof(buftail)))
diff --git a/arch/sparc/kernel/signal_32.c b/arch/sparc/kernel/signal_32.c
index 741d0701003a..1da36dd34990 100644
--- a/arch/sparc/kernel/signal_32.c
+++ b/arch/sparc/kernel/signal_32.c
@@ -65,7 +65,7 @@ struct rt_signal_frame {
*/
static inline bool invalid_frame_pointer(void __user *fp, int fplen)
{
- if ((((unsigned long) fp) & 15) || !__access_ok((unsigned long)fp, fplen))
+ if ((((unsigned long) fp) & 15) || !access_ok(fp, fplen))
return true;
return false;
diff --git a/lib/test_lockup.c b/lib/test_lockup.c
index f1a020bcc763..07f476317187 100644
--- a/lib/test_lockup.c
+++ b/lib/test_lockup.c
@@ -417,8 +417,8 @@ static bool test_kernel_ptr(unsigned long addr, int size)
return false;
/* should be at least readable kernel address */
- if (access_ok(ptr, 1) ||
- access_ok(ptr + size - 1, 1) ||
+ if (access_ok((void __user *)ptr, 1) ||
+ access_ok((void __user *)ptr + size - 1, 1) ||
get_kernel_nofault(buf, ptr) ||
get_kernel_nofault(buf, ptr + size - 1)) {
pr_err("invalid kernel ptr: %#lx\n", addr);
--
2.34.1
From: Miaoqian Lin <[email protected]>
[ Upstream commit f725d20579807a68afbe5dba69e78b8fa05f5ef0 ]
Fix the missing clk_disable_unprepare() before return
from rockchip_i2s_probe() in the error handling case.
Fixes: 01605ad12875 ("ASoC: rockchip-i2s: enable "hclk" for rockchip I2S controller")
Signed-off-by: Miaoqian Lin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/rockchip/rockchip_i2s.c | 15 ++++++++++-----
1 file changed, 10 insertions(+), 5 deletions(-)
diff --git a/sound/soc/rockchip/rockchip_i2s.c b/sound/soc/rockchip/rockchip_i2s.c
index 18f13bf1021c..785baf98f9da 100644
--- a/sound/soc/rockchip/rockchip_i2s.c
+++ b/sound/soc/rockchip/rockchip_i2s.c
@@ -624,19 +624,23 @@ static int rockchip_i2s_probe(struct platform_device *pdev)
i2s->mclk = devm_clk_get(&pdev->dev, "i2s_clk");
if (IS_ERR(i2s->mclk)) {
dev_err(&pdev->dev, "Can't retrieve i2s master clock\n");
- return PTR_ERR(i2s->mclk);
+ ret = PTR_ERR(i2s->mclk);
+ goto err_clk;
}
regs = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
- if (IS_ERR(regs))
- return PTR_ERR(regs);
+ if (IS_ERR(regs)) {
+ ret = PTR_ERR(regs);
+ goto err_clk;
+ }
i2s->regmap = devm_regmap_init_mmio(&pdev->dev, regs,
&rockchip_i2s_regmap_config);
if (IS_ERR(i2s->regmap)) {
dev_err(&pdev->dev,
"Failed to initialise managed register map\n");
- return PTR_ERR(i2s->regmap);
+ ret = PTR_ERR(i2s->regmap);
+ goto err_clk;
}
i2s->playback_dma_data.addr = res->start + I2S_TXDR;
@@ -695,7 +699,8 @@ static int rockchip_i2s_probe(struct platform_device *pdev)
i2s_runtime_suspend(&pdev->dev);
err_pm_disable:
pm_runtime_disable(&pdev->dev);
-
+err_clk:
+ clk_disable_unprepare(i2s->hclk);
return ret;
}
--
2.34.1
From: Zhang Wensheng <[email protected]>
[ Upstream commit ab552fcb17cc9e4afe0e4ac4df95fc7b30e8490a ]
KASAN reports a use-after-free report when doing normal scsi-mq test
[69832.239032] ==================================================================
[69832.241810] BUG: KASAN: use-after-free in bfq_dispatch_request+0x1045/0x44b0
[69832.243267] Read of size 8 at addr ffff88802622ba88 by task kworker/3:1H/155
[69832.244656]
[69832.245007] CPU: 3 PID: 155 Comm: kworker/3:1H Not tainted 5.10.0-10295-g576c6382529e #8
[69832.246626] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[69832.249069] Workqueue: kblockd blk_mq_run_work_fn
[69832.250022] Call Trace:
[69832.250541] dump_stack+0x9b/0xce
[69832.251232] ? bfq_dispatch_request+0x1045/0x44b0
[69832.252243] print_address_description.constprop.6+0x3e/0x60
[69832.253381] ? __cpuidle_text_end+0x5/0x5
[69832.254211] ? vprintk_func+0x6b/0x120
[69832.254994] ? bfq_dispatch_request+0x1045/0x44b0
[69832.255952] ? bfq_dispatch_request+0x1045/0x44b0
[69832.256914] kasan_report.cold.9+0x22/0x3a
[69832.257753] ? bfq_dispatch_request+0x1045/0x44b0
[69832.258755] check_memory_region+0x1c1/0x1e0
[69832.260248] bfq_dispatch_request+0x1045/0x44b0
[69832.261181] ? bfq_bfqq_expire+0x2440/0x2440
[69832.262032] ? blk_mq_delay_run_hw_queues+0xf9/0x170
[69832.263022] __blk_mq_do_dispatch_sched+0x52f/0x830
[69832.264011] ? blk_mq_sched_request_inserted+0x100/0x100
[69832.265101] __blk_mq_sched_dispatch_requests+0x398/0x4f0
[69832.266206] ? blk_mq_do_dispatch_ctx+0x570/0x570
[69832.267147] ? __switch_to+0x5f4/0xee0
[69832.267898] blk_mq_sched_dispatch_requests+0xdf/0x140
[69832.268946] __blk_mq_run_hw_queue+0xc0/0x270
[69832.269840] blk_mq_run_work_fn+0x51/0x60
[69832.278170] process_one_work+0x6d4/0xfe0
[69832.278984] worker_thread+0x91/0xc80
[69832.279726] ? __kthread_parkme+0xb0/0x110
[69832.280554] ? process_one_work+0xfe0/0xfe0
[69832.281414] kthread+0x32d/0x3f0
[69832.282082] ? kthread_park+0x170/0x170
[69832.282849] ret_from_fork+0x1f/0x30
[69832.283573]
[69832.283886] Allocated by task 7725:
[69832.284599] kasan_save_stack+0x19/0x40
[69832.285385] __kasan_kmalloc.constprop.2+0xc1/0xd0
[69832.286350] kmem_cache_alloc_node+0x13f/0x460
[69832.287237] bfq_get_queue+0x3d4/0x1140
[69832.287993] bfq_get_bfqq_handle_split+0x103/0x510
[69832.289015] bfq_init_rq+0x337/0x2d50
[69832.289749] bfq_insert_requests+0x304/0x4e10
[69832.290634] blk_mq_sched_insert_requests+0x13e/0x390
[69832.291629] blk_mq_flush_plug_list+0x4b4/0x760
[69832.292538] blk_flush_plug_list+0x2c5/0x480
[69832.293392] io_schedule_prepare+0xb2/0xd0
[69832.294209] io_schedule_timeout+0x13/0x80
[69832.295014] wait_for_common_io.constprop.1+0x13c/0x270
[69832.296137] submit_bio_wait+0x103/0x1a0
[69832.296932] blkdev_issue_discard+0xe6/0x160
[69832.297794] blk_ioctl_discard+0x219/0x290
[69832.298614] blkdev_common_ioctl+0x50a/0x1750
[69832.304715] blkdev_ioctl+0x470/0x600
[69832.305474] block_ioctl+0xde/0x120
[69832.306232] vfs_ioctl+0x6c/0xc0
[69832.306877] __se_sys_ioctl+0x90/0xa0
[69832.307629] do_syscall_64+0x2d/0x40
[69832.308362] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[69832.309382]
[69832.309701] Freed by task 155:
[69832.310328] kasan_save_stack+0x19/0x40
[69832.311121] kasan_set_track+0x1c/0x30
[69832.311868] kasan_set_free_info+0x1b/0x30
[69832.312699] __kasan_slab_free+0x111/0x160
[69832.313524] kmem_cache_free+0x94/0x460
[69832.314367] bfq_put_queue+0x582/0x940
[69832.315112] __bfq_bfqd_reset_in_service+0x166/0x1d0
[69832.317275] bfq_bfqq_expire+0xb27/0x2440
[69832.318084] bfq_dispatch_request+0x697/0x44b0
[69832.318991] __blk_mq_do_dispatch_sched+0x52f/0x830
[69832.319984] __blk_mq_sched_dispatch_requests+0x398/0x4f0
[69832.321087] blk_mq_sched_dispatch_requests+0xdf/0x140
[69832.322225] __blk_mq_run_hw_queue+0xc0/0x270
[69832.323114] blk_mq_run_work_fn+0x51/0x60
[69832.323942] process_one_work+0x6d4/0xfe0
[69832.324772] worker_thread+0x91/0xc80
[69832.325518] kthread+0x32d/0x3f0
[69832.326205] ret_from_fork+0x1f/0x30
[69832.326932]
[69832.338297] The buggy address belongs to the object at ffff88802622b968
[69832.338297] which belongs to the cache bfq_queue of size 512
[69832.340766] The buggy address is located 288 bytes inside of
[69832.340766] 512-byte region [ffff88802622b968, ffff88802622bb68)
[69832.343091] The buggy address belongs to the page:
[69832.344097] page:ffffea0000988a00 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88802622a528 pfn:0x26228
[69832.346214] head:ffffea0000988a00 order:2 compound_mapcount:0 compound_pincount:0
[69832.347719] flags: 0x1fffff80010200(slab|head)
[69832.348625] raw: 001fffff80010200 ffffea0000dbac08 ffff888017a57650 ffff8880179fe840
[69832.354972] raw: ffff88802622a528 0000000000120008 00000001ffffffff 0000000000000000
[69832.356547] page dumped because: kasan: bad access detected
[69832.357652]
[69832.357970] Memory state around the buggy address:
[69832.358926] ffff88802622b980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[69832.360358] ffff88802622ba00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[69832.361810] >ffff88802622ba80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[69832.363273] ^
[69832.363975] ffff88802622bb00: fb fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc
[69832.375960] ffff88802622bb80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[69832.377405] ==================================================================
In bfq_dispatch_requestfunction, it may have function call:
bfq_dispatch_request
__bfq_dispatch_request
bfq_select_queue
bfq_bfqq_expire
__bfq_bfqd_reset_in_service
bfq_put_queue
kmem_cache_free
In this function call, in_serv_queue has beed expired and meet the
conditions to free. In the function bfq_dispatch_request, the address
of in_serv_queue pointing to has been released. For getting the value
of idle_timer_disabled, it will get flags value from the address which
in_serv_queue pointing to, then the problem of use-after-free happens;
Fix the problem by check in_serv_queue == bfqd->in_service_queue, to
get the value of idle_timer_disabled if in_serve_queue is equel to
bfqd->in_service_queue. If the space of in_serv_queue pointing has
been released, this judge will aviod use-after-free problem.
And if in_serv_queue may be expired or finished, the idle_timer_disabled
will be false which would not give effects to bfq_update_dispatch_stats.
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Zhang Wensheng <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
block/bfq-iosched.c | 15 ++++++++-------
1 file changed, 8 insertions(+), 7 deletions(-)
diff --git a/block/bfq-iosched.c b/block/bfq-iosched.c
index 8d95bf7765b1..138541996dd5 100644
--- a/block/bfq-iosched.c
+++ b/block/bfq-iosched.c
@@ -4799,7 +4799,7 @@ static struct request *bfq_dispatch_request(struct blk_mq_hw_ctx *hctx)
struct bfq_data *bfqd = hctx->queue->elevator->elevator_data;
struct request *rq;
struct bfq_queue *in_serv_queue;
- bool waiting_rq, idle_timer_disabled;
+ bool waiting_rq, idle_timer_disabled = false;
spin_lock_irq(&bfqd->lock);
@@ -4807,14 +4807,15 @@ static struct request *bfq_dispatch_request(struct blk_mq_hw_ctx *hctx)
waiting_rq = in_serv_queue && bfq_bfqq_wait_request(in_serv_queue);
rq = __bfq_dispatch_request(hctx);
-
- idle_timer_disabled =
- waiting_rq && !bfq_bfqq_wait_request(in_serv_queue);
+ if (in_serv_queue == bfqd->in_service_queue) {
+ idle_timer_disabled =
+ waiting_rq && !bfq_bfqq_wait_request(in_serv_queue);
+ }
spin_unlock_irq(&bfqd->lock);
-
- bfq_update_dispatch_stats(hctx->queue, rq, in_serv_queue,
- idle_timer_disabled);
+ bfq_update_dispatch_stats(hctx->queue, rq,
+ idle_timer_disabled ? in_serv_queue : NULL,
+ idle_timer_disabled);
return rq;
}
--
2.34.1
From: Baokun Li <[email protected]>
commit 3cbf0e392f173ba0ce425968c8374a6aa3e90f2e upstream.
Hulk Robot reported a KASAN report about use-after-free:
==================================================================
BUG: KASAN: use-after-free in __list_del_entry_valid+0x13d/0x160
Read of size 8 at addr ffff888035e37d98 by task ubiattach/1385
[...]
Call Trace:
klist_dec_and_del+0xa7/0x4a0
klist_put+0xc7/0x1a0
device_del+0x4d4/0xed0
cdev_device_del+0x1a/0x80
ubi_attach_mtd_dev+0x2951/0x34b0 [ubi]
ctrl_cdev_ioctl+0x286/0x2f0 [ubi]
Allocated by task 1414:
device_add+0x60a/0x18b0
cdev_device_add+0x103/0x170
ubi_create_volume+0x1118/0x1a10 [ubi]
ubi_cdev_ioctl+0xb7f/0x1ba0 [ubi]
Freed by task 1385:
cdev_device_del+0x1a/0x80
ubi_remove_volume+0x438/0x6c0 [ubi]
ubi_cdev_ioctl+0xbf4/0x1ba0 [ubi]
[...]
==================================================================
The lock held by ctrl_cdev_ioctl is ubi_devices_mutex, but the lock held
by ubi_cdev_ioctl is ubi->device_mutex. Therefore, the two locks can be
concurrent.
ctrl_cdev_ioctl contains two operations: ubi_attach and ubi_detach.
ubi_detach is bug-free because it uses reference counting to prevent
concurrency. However, uif_init and uif_close in ubi_attach may race with
ubi_cdev_ioctl.
uif_init will race with ubi_cdev_ioctl as in the following stack.
cpu1 cpu2 cpu3
_______________________|________________________|______________________
ctrl_cdev_ioctl
ubi_attach_mtd_dev
uif_init
ubi_cdev_ioctl
ubi_create_volume
cdev_device_add
ubi_add_volume
// sysfs exist
kill_volumes
ubi_cdev_ioctl
ubi_remove_volume
cdev_device_del
// first free
ubi_free_volume
cdev_del
// double free
cdev_device_del
And uif_close will race with ubi_cdev_ioctl as in the following stack.
cpu1 cpu2 cpu3
_______________________|________________________|______________________
ctrl_cdev_ioctl
ubi_attach_mtd_dev
uif_init
ubi_cdev_ioctl
ubi_create_volume
cdev_device_add
ubi_debugfs_init_dev
//error goto out_uif;
uif_close
kill_volumes
ubi_cdev_ioctl
ubi_remove_volume
cdev_device_del
// first free
ubi_free_volume
// double free
The cause of this problem is that commit 714fb87e8bc0 make device
"available" before it becomes accessible via sysfs. Therefore, we
roll back the modification. We will fix the race condition between
ubi device creation and udev by removing ubi_get_device in
vol_attribute_show and dev_attribute_show.This avoids accessing
uninitialized ubi_devices[ubi_num].
ubi_get_device is used to prevent devices from being deleted during
sysfs execution. However, now kernfs ensures that devices will not
be deleted before all reference counting are released.
The key process is shown in the following stack.
device_del
device_remove_attrs
device_remove_groups
sysfs_remove_groups
sysfs_remove_group
remove_files
kernfs_remove_by_name
kernfs_remove_by_name_ns
__kernfs_remove
kernfs_drain
Fixes: 714fb87e8bc0 ("ubi: Fix race condition between ubi device creation and udev")
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Baokun Li <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mtd/ubi/build.c | 9 +--------
drivers/mtd/ubi/vmt.c | 8 +-------
2 files changed, 2 insertions(+), 15 deletions(-)
--- a/drivers/mtd/ubi/build.c
+++ b/drivers/mtd/ubi/build.c
@@ -350,9 +350,6 @@ static ssize_t dev_attribute_show(struct
* we still can use 'ubi->ubi_num'.
*/
ubi = container_of(dev, struct ubi_device, dev);
- ubi = ubi_get_device(ubi->ubi_num);
- if (!ubi)
- return -ENODEV;
if (attr == &dev_eraseblock_size)
ret = sprintf(buf, "%d\n", ubi->leb_size);
@@ -381,7 +378,6 @@ static ssize_t dev_attribute_show(struct
else
ret = -EINVAL;
- ubi_put_device(ubi);
return ret;
}
@@ -980,9 +976,6 @@ int ubi_attach_mtd_dev(struct mtd_info *
goto out_detach;
}
- /* Make device "available" before it becomes accessible via sysfs */
- ubi_devices[ubi_num] = ubi;
-
err = uif_init(ubi);
if (err)
goto out_detach;
@@ -1027,6 +1020,7 @@ int ubi_attach_mtd_dev(struct mtd_info *
wake_up_process(ubi->bgt_thread);
spin_unlock(&ubi->wl_lock);
+ ubi_devices[ubi_num] = ubi;
ubi_notify_all(ubi, UBI_VOLUME_ADDED, NULL);
return ubi_num;
@@ -1035,7 +1029,6 @@ out_debugfs:
out_uif:
uif_close(ubi);
out_detach:
- ubi_devices[ubi_num] = NULL;
ubi_wl_close(ubi);
ubi_free_all_volumes(ubi);
vfree(ubi->vtbl);
--- a/drivers/mtd/ubi/vmt.c
+++ b/drivers/mtd/ubi/vmt.c
@@ -56,16 +56,11 @@ static ssize_t vol_attribute_show(struct
{
int ret;
struct ubi_volume *vol = container_of(dev, struct ubi_volume, dev);
- struct ubi_device *ubi;
-
- ubi = ubi_get_device(vol->ubi->ubi_num);
- if (!ubi)
- return -ENODEV;
+ struct ubi_device *ubi = vol->ubi;
spin_lock(&ubi->volumes_lock);
if (!ubi->volumes[vol->vol_id]) {
spin_unlock(&ubi->volumes_lock);
- ubi_put_device(ubi);
return -ENODEV;
}
/* Take a reference to prevent volume removal */
@@ -103,7 +98,6 @@ static ssize_t vol_attribute_show(struct
vol->ref_count -= 1;
ubi_assert(vol->ref_count >= 0);
spin_unlock(&ubi->volumes_lock);
- ubi_put_device(ubi);
return ret;
}
From: Mohan Kumar <[email protected]>
commit 6ddc2f749621d5d45ca03edc9f0616bcda136d29 upstream.
There is a corner case with unsol event handling during codec runtime
suspending state. When the codec runtime suspend call initiated, the
codec->in_pm atomic variable would be 0, currently the codec runtime
suspend function calls snd_hdac_enter_pm() which will just increments
the codec->in_pm atomic variable. Consider unsol event happened just
after this step and before snd_hdac_leave_pm() in the codec runtime
suspend function. The snd_hdac_power_up_pm() in the unsol event
flow in hdmi_present_sense_via_verbs() function would just increment
the codec->in_pm atomic variable without calling pm_runtime_get_sync
function.
As codec runtime suspend flow is already in progress and in parallel
unsol event is also accessing the codec verbs, as soon as codec
suspend flow completes and clocks are switched off before completing
the unsol event handling as both functions doesn't wait for each other.
This will result in below errors
[ 589.428020] tegra-hda 3510000.hda: azx_get_response timeout, switching
to polling mode: last cmd=0x505f2f57
[ 589.428344] tegra-hda 3510000.hda: spurious response 0x80000074:0x5,
last cmd=0x505f2f57
[ 589.428547] tegra-hda 3510000.hda: spurious response 0x80000065:0x5,
last cmd=0x505f2f57
To avoid this, the unsol event flow should not perform any codec verb
related operations during RPM_SUSPENDING state.
Signed-off-by: Mohan Kumar <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/pci/hda/patch_hdmi.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
--- a/sound/pci/hda/patch_hdmi.c
+++ b/sound/pci/hda/patch_hdmi.c
@@ -1608,6 +1608,7 @@ static void hdmi_present_sense_via_verbs
struct hda_codec *codec = per_pin->codec;
struct hdmi_spec *spec = codec->spec;
struct hdmi_eld *eld = &spec->temp_eld;
+ struct device *dev = hda_codec_dev(codec);
hda_nid_t pin_nid = per_pin->pin_nid;
int dev_id = per_pin->dev_id;
/*
@@ -1621,8 +1622,13 @@ static void hdmi_present_sense_via_verbs
int present;
int ret;
+#ifdef CONFIG_PM
+ if (dev->power.runtime_status == RPM_SUSPENDING)
+ return;
+#endif
+
ret = snd_hda_power_up_pm(codec);
- if (ret < 0 && pm_runtime_suspended(hda_codec_dev(codec)))
+ if (ret < 0 && pm_runtime_suspended(dev))
goto out;
present = snd_hda_jack_pin_sense(codec, pin_nid, dev_id);
From: Corentin Labbe <[email protected]>
[ Upstream commit 881fc7fba6c3e7d77d608b9a50b01a89d5e0c61b ]
When adding hashes support to sun8i-ss, I have added them only on A83T.
But I forgot that 0 is a valid algorithm ID, so hashes are enabled on A80 but
with an incorrect ID.
Anyway, even with correct IDs, hashes do not work on A80 and I cannot
find why.
So let's disable all of them on A80.
Fixes: d9b45418a917 ("crypto: sun8i-ss - support hash algorithms")
Signed-off-by: Corentin Labbe <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/crypto/allwinner/sun8i-ss/sun8i-ss-core.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/crypto/allwinner/sun8i-ss/sun8i-ss-core.c b/drivers/crypto/allwinner/sun8i-ss/sun8i-ss-core.c
index 80e89066dbd1..319fe3279a71 100644
--- a/drivers/crypto/allwinner/sun8i-ss/sun8i-ss-core.c
+++ b/drivers/crypto/allwinner/sun8i-ss/sun8i-ss-core.c
@@ -30,6 +30,8 @@
static const struct ss_variant ss_a80_variant = {
.alg_cipher = { SS_ALG_AES, SS_ALG_DES, SS_ALG_3DES,
},
+ .alg_hash = { SS_ID_NOTSUPP, SS_ID_NOTSUPP, SS_ID_NOTSUPP, SS_ID_NOTSUPP,
+ },
.op_mode = { SS_OP_ECB, SS_OP_CBC,
},
.ss_clks = {
--
2.34.1
From: Geert Uytterhoeven <[email protected]>
[ Upstream commit ab7d88549e2f7ae116afd303f32e1950cb790a1d ]
The Cavium ThunderX Random Number Generator is only present on Cavium
ThunderX SoCs, and not available as an independent PCIe endpoint. Hence
add a dependency on ARCH_THUNDER, to prevent asking the user about this
driver when configuring a kernel without Cavium Thunder SoC support.
Fixes: cc2f1908c6b8f625 ("hwrng: cavium - Add Cavium HWRNG driver for ThunderX SoC.")
Signed-off-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/char/hw_random/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig
index 31d367949fad..a7d9e4600d40 100644
--- a/drivers/char/hw_random/Kconfig
+++ b/drivers/char/hw_random/Kconfig
@@ -427,7 +427,7 @@ config HW_RANDOM_MESON
config HW_RANDOM_CAVIUM
tristate "Cavium ThunderX Random Number Generator support"
- depends on HW_RANDOM && PCI && ARM64
+ depends on HW_RANDOM && PCI && ARCH_THUNDER
default HW_RANDOM
help
This driver provides kernel-side support for the Random Number
--
2.34.1
From: Drew Fustini <[email protected]>
[ Upstream commit bceaae3bac0ce27c549bb050336d8d08abc2ee54 ]
The existing fix for errata i940 causes a conflict for IPU2 which is
using timer 3 and 4. From arch/arm/boot/dts/dra7-ipu-dsp-common.dtsi:
&ipu2 {
mboxes = <&mailbox6 &mbox_ipu2_ipc3x>;
ti,timers = <&timer3>;
ti,watchdog-timers = <&timer4>, <&timer9>;
};
The conflict was noticed when booting mainline on the BeagleBoard X15
which has a TI AM5728 SoC:
remoteproc remoteproc1: 55020000.ipu is available
remoteproc remoteproc1: powering up 55020000.ipu
remoteproc remoteproc1: Booting fw image dra7-ipu2-fw.xem4
omap-rproc 55020000.ipu: could not get timer platform device
omap-rproc 55020000.ipu: omap_rproc_enable_timers failed: -19
remoteproc remoteproc1: can't start rproc 55020000.ipu: -19
This change modifies the errata fix to instead use timer 15 and 16 which
resolves the timer conflict.
It does not appear to introduce any latency regression. Results from
cyclictest with original errata fix using dmtimer 3 and 4:
# cyclictest --mlockall --smp --priority=80 --interval=200 --distance=0
policy: fifo: loadavg: 0.02 0.03 0.05
T: 0 ( 1449) P:80 I:200 C: 800368 Min: 0 Act: 32 Avg: 22 Max: 128
T: 1 ( 1450) P:80 I:200 C: 800301 Min: 0 Act: 12 Avg: 23 Max: 70
The results after the change to dmtimer 15 and 16:
# cyclictest --mlockall --smp --priority=80 --interval=200 --distance=0
policy: fifo: loadavg: 0.36 0.19 0.07
T: 0 ( 1711) P:80 I:200 C: 759599 Min: 0 Act: 6 Avg: 22 Max: 108
T: 1 ( 1712) P:80 I:200 C: 759539 Min: 0 Act: 19 Avg: 23 Max: 79
Fixes: 25de4ce5ed02 ("clocksource/drivers/timer-ti-dm: Handle dra7 timer wrap errata i940")
Link: https://lore.kernel.org/linux-omap/YfWsG0p6to3IJuvE@x1/
Suggested-by: Suman Anna <[email protected]>
Reviewed-by: Tony Lindgren <[email protected]>
Signed-off-by: Drew Fustini <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Daniel Lezcano <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/dra7-l4.dtsi | 5 ++---
arch/arm/boot/dts/dra7.dtsi | 8 ++++----
drivers/clocksource/timer-ti-dm-systimer.c | 4 ++--
3 files changed, 8 insertions(+), 9 deletions(-)
diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi
index 30b72f431850..f8c0eee7a62b 100644
--- a/arch/arm/boot/dts/dra7-l4.dtsi
+++ b/arch/arm/boot/dts/dra7-l4.dtsi
@@ -3448,8 +3448,7 @@
ti,timer-pwm;
};
};
-
- target-module@2c000 { /* 0x4882c000, ap 17 02.0 */
+ timer15_target: target-module@2c000 { /* 0x4882c000, ap 17 02.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
reg = <0x2c000 0x4>,
<0x2c010 0x4>;
@@ -3477,7 +3476,7 @@
};
};
- target-module@2e000 { /* 0x4882e000, ap 19 14.0 */
+ timer16_target: target-module@2e000 { /* 0x4882e000, ap 19 14.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
reg = <0x2e000 0x4>,
<0x2e010 0x4>;
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 7ecf8f86ac74..998932136656 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -1093,20 +1093,20 @@
};
/* Local timers, see ARM architected timer wrap erratum i940 */
-&timer3_target {
+&timer15_target {
ti,no-reset-on-init;
ti,no-idle;
timer@0 {
- assigned-clocks = <&l4per_clkctrl DRA7_L4PER_TIMER3_CLKCTRL 24>;
+ assigned-clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER15_CLKCTRL 24>;
assigned-clock-parents = <&timer_sys_clk_div>;
};
};
-&timer4_target {
+&timer16_target {
ti,no-reset-on-init;
ti,no-idle;
timer@0 {
- assigned-clocks = <&l4per_clkctrl DRA7_L4PER_TIMER4_CLKCTRL 24>;
+ assigned-clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER16_CLKCTRL 24>;
assigned-clock-parents = <&timer_sys_clk_div>;
};
};
diff --git a/drivers/clocksource/timer-ti-dm-systimer.c b/drivers/clocksource/timer-ti-dm-systimer.c
index 1fccb457fcc5..2737407ff069 100644
--- a/drivers/clocksource/timer-ti-dm-systimer.c
+++ b/drivers/clocksource/timer-ti-dm-systimer.c
@@ -694,9 +694,9 @@ static int __init dmtimer_percpu_quirk_init(struct device_node *np, u32 pa)
return 0;
}
- if (pa == 0x48034000) /* dra7 dmtimer3 */
+ if (pa == 0x4882c000) /* dra7 dmtimer15 */
return dmtimer_percpu_timer_init(np, 0);
- else if (pa == 0x48036000) /* dra7 dmtimer4 */
+ else if (pa == 0x4882e000) /* dra7 dmtimer16 */
return dmtimer_percpu_timer_init(np, 1);
return 0;
--
2.34.1
From: Chen-Yu Tsai <[email protected]>
[ Upstream commit 1763933d377ecb05454f8d20e3c8922480db2ac0 ]
Virtual GPIOs do not have any hardware state associated with them. Any
attempt to read back hardware state for these pins result in error
codes.
Skip dumping extra pin config information for these virtual GPIOs.
Fixes: 184d8e13f9b1 ("pinctrl: mediatek: Add support for pin configuration dump via debugfs.")
Signed-off-by: Chen-Yu Tsai <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pinctrl/mediatek/pinctrl-paris.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/pinctrl/mediatek/pinctrl-paris.c b/drivers/pinctrl/mediatek/pinctrl-paris.c
index 2f3c65265e23..d0a4ebbe1e7e 100644
--- a/drivers/pinctrl/mediatek/pinctrl-paris.c
+++ b/drivers/pinctrl/mediatek/pinctrl-paris.c
@@ -580,6 +580,9 @@ ssize_t mtk_pctrl_show_one_pin(struct mtk_pinctrl *hw,
if (gpio >= hw->soc->npins)
return -EINVAL;
+ if (mtk_is_virt_gpio(hw, gpio))
+ return -EINVAL;
+
desc = (const struct mtk_pin_desc *)&hw->soc->pins[gpio];
pinmux = mtk_pctrl_get_pinmux(hw, gpio);
if (pinmux >= hw->soc->nfuncs)
--
2.34.1
From: Damien Le Moal <[email protected]>
[ Upstream commit cd2268a180117aa8ebb23e090ba204324b2d0e93 ]
The ds_ads_m field of struct ssp_ini_tm_start_req has the type __le32.
Assigning a value to it should thus use cpu_to_le32(). This fixes the
sparse warning:
warning: incorrect type in assignment (different base types)
expected restricted __le32 [addressable] [assigned] [usertype] ds_ads_m
got int
Link: https://lore.kernel.org/r/[email protected]
Fixes: dbf9bfe61571 ("[SCSI] pm8001: add SAS/SATA HBA driver")
Reviewed-by: Jack Wang <[email protected]>
Signed-off-by: Damien Le Moal <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/pm8001/pm8001_hwi.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index eb63f8c5a6f9..0e6a0b50bfb9 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -4575,7 +4575,7 @@ int pm8001_chip_ssp_tm_req(struct pm8001_hba_info *pm8001_ha,
memcpy(sspTMCmd.lun, task->ssp_task.LUN, 8);
sspTMCmd.tag = cpu_to_le32(ccb->ccb_tag);
if (pm8001_ha->chip_id != chip_8001)
- sspTMCmd.ds_ads_m = 0x08;
+ sspTMCmd.ds_ads_m = cpu_to_le32(0x08);
circularQ = &pm8001_ha->inbnd_q_tbl[0];
ret = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &sspTMCmd,
sizeof(sspTMCmd), 0);
--
2.34.1
From: Qais Yousef <[email protected]>
[ Upstream commit 77cf151b7bbdfa3577b3c3f3a5e267a6c60a263b ]
We can't use this tracepoint in modules without having the symbol
exported first, fix that.
Fixes: 765047932f15 ("sched/pelt: Add support to track thermal pressure")
Signed-off-by: Qais Yousef <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/sched/core.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index 0a5f9fad45e4..e437d946b27b 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -36,6 +36,7 @@ EXPORT_TRACEPOINT_SYMBOL_GPL(pelt_rt_tp);
EXPORT_TRACEPOINT_SYMBOL_GPL(pelt_dl_tp);
EXPORT_TRACEPOINT_SYMBOL_GPL(pelt_irq_tp);
EXPORT_TRACEPOINT_SYMBOL_GPL(pelt_se_tp);
+EXPORT_TRACEPOINT_SYMBOL_GPL(pelt_thermal_tp);
EXPORT_TRACEPOINT_SYMBOL_GPL(sched_cpu_capacity_tp);
EXPORT_TRACEPOINT_SYMBOL_GPL(sched_overutilized_tp);
EXPORT_TRACEPOINT_SYMBOL_GPL(sched_util_est_cfs_tp);
--
2.34.1
From: Zhihao Cheng <[email protected]>
commit 716b4573026bcbfa7b58ed19fe15554bac66b082 upstream.
whiteout inode should be put when do_tmpfile() failed if inode has been
initialized. Otherwise we will get following warning during umount:
UBIFS error (ubi0:0 pid 1494): ubifs_assert_failed [ubifs]: UBIFS
assert failed: c->bi.dd_growth == 0, in fs/ubifs/super.c:1930
VFS: Busy inodes after unmount of ubifs. Self-destruct in 5 seconds.
Fixes: 9e0a1fff8db56ea ("ubifs: Implement RENAME_WHITEOUT")
Signed-off-by: Zhihao Cheng <[email protected]>
Suggested-by: Sascha Hauer <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ubifs/dir.c | 2 ++
1 file changed, 2 insertions(+)
--- a/fs/ubifs/dir.c
+++ b/fs/ubifs/dir.c
@@ -431,6 +431,8 @@ out_inode:
make_bad_inode(inode);
if (!instantiated)
iput(inode);
+ else if (whiteout)
+ iput(*whiteout);
out_budg:
ubifs_release_budget(c, &req);
if (!instantiated)
From: Krzysztof Kozlowski <[email protected]>
commit 60a9914cb2061ba612a3f14f6ad329912b486360 upstream.
Add required VDD supplies to HDMI block on SMDK5250. Without them, the
HDMI driver won't probe. Because of lack of schematics, use same
supplies as on Arndale 5250 board (voltage matches).
Cc: <[email protected]> # v3.15+
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Alim Akhtar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/boot/dts/exynos5250-smdk5250.dts | 3 +++
1 file changed, 3 insertions(+)
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -118,6 +118,9 @@
status = "okay";
ddc = <&i2c_2>;
hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+ vdd-supply = <&ldo8_reg>;
+ vdd_osc-supply = <&ldo10_reg>;
+ vdd_pll-supply = <&ldo8_reg>;
};
&i2c_0 {
From: Chen-Yu Tsai <[email protected]>
[ Upstream commit 19bce7ce0a593c7024030a0cda9e23facea3c93d ]
For mtk_pinconf_get(), the "argument" argument is typically returned by
pinconf_to_config_argument(), which holds the value for a given pinconf
parameter. It certainly should not have the type of "enum pin_config_param",
which describes the type of the pinconf parameter itself.
Change the type to u32, which matches the return type of
pinconf_to_config_argument().
Fixes: 805250982bb5 ("pinctrl: mediatek: add pinctrl-paris that implements the vendor dt-bindings")
Signed-off-by: Chen-Yu Tsai <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pinctrl/mediatek/pinctrl-paris.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/pinctrl/mediatek/pinctrl-paris.c b/drivers/pinctrl/mediatek/pinctrl-paris.c
index 4dd5bd2f135e..9b268ad4e1b8 100644
--- a/drivers/pinctrl/mediatek/pinctrl-paris.c
+++ b/drivers/pinctrl/mediatek/pinctrl-paris.c
@@ -184,8 +184,7 @@ static int mtk_pinconf_get(struct pinctrl_dev *pctldev,
}
static int mtk_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
- enum pin_config_param param,
- enum pin_config_param arg)
+ enum pin_config_param param, u32 arg)
{
struct mtk_pinctrl *hw = pinctrl_dev_get_drvdata(pctldev);
const struct mtk_pin_desc *desc;
--
2.34.1
From: Srinivas Kandagatla <[email protected]>
[ Upstream commit 4b0bec6088588a120d33db85b1f0d9f096d1df71 ]
wcd934x_rx_hph_mode_put currently returns zero eventhough it changes the value.
Fix this, so that change notifications are sent correctly.
Fixes: 1cde8b822332 ("ASoC: wcd934x: add basic controls")
Signed-off-by: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/codecs/wcd934x.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/sound/soc/codecs/wcd934x.c b/sound/soc/codecs/wcd934x.c
index 01df3f4e045a..f07dea0bc27e 100644
--- a/sound/soc/codecs/wcd934x.c
+++ b/sound/soc/codecs/wcd934x.c
@@ -2522,13 +2522,16 @@ static int wcd934x_rx_hph_mode_put(struct snd_kcontrol *kc,
mode_val = ucontrol->value.enumerated.item[0];
+ if (mode_val == wcd->hph_mode)
+ return 0;
+
if (mode_val == 0) {
dev_err(wcd->dev, "Invalid HPH Mode, default to ClSH HiFi\n");
mode_val = CLS_H_LOHIFI;
}
wcd->hph_mode = mode_val;
- return 0;
+ return 1;
}
static int slim_rx_mux_get(struct snd_kcontrol *kc,
--
2.34.1
From: Yangtao Li <[email protected]>
[ Upstream commit a3469912f4caeea32ecbe0bf472b14634fecb38e ]
Use devm_platform_ioremap_resource() to simplify code.
Signed-off-by: Yangtao Li <[email protected]>
Reviewed-by: Andrew Jeffery <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joel Stanley <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/fsi/fsi-master-aspeed.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/fsi/fsi-master-aspeed.c b/drivers/fsi/fsi-master-aspeed.c
index dbad73162c83..5d2469d44607 100644
--- a/drivers/fsi/fsi-master-aspeed.c
+++ b/drivers/fsi/fsi-master-aspeed.c
@@ -525,7 +525,6 @@ static int tacoma_cabled_fsi_fixup(struct device *dev)
static int fsi_master_aspeed_probe(struct platform_device *pdev)
{
struct fsi_master_aspeed *aspeed;
- struct resource *res;
int rc, links, reg;
__be32 raw;
@@ -541,8 +540,7 @@ static int fsi_master_aspeed_probe(struct platform_device *pdev)
aspeed->dev = &pdev->dev;
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- aspeed->base = devm_ioremap_resource(&pdev->dev, res);
+ aspeed->base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(aspeed->base))
return PTR_ERR(aspeed->base);
--
2.34.1
From: Adrian Hunter <[email protected]>
[ Upstream commit d680ff24e9e14444c63945b43a37ede7cd6958f9 ]
Reset appropriate variables in the parser loop between parsing separate
filters, so that they do not interfere with parsing the next filter.
Fixes: 375637bc524952 ("perf/core: Introduce address range filtering")
Signed-off-by: Adrian Hunter <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/events/core.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/kernel/events/core.c b/kernel/events/core.c
index c8b3f94f0dbb..79d8b27cf2fc 100644
--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -10265,8 +10265,11 @@ perf_event_parse_addr_filter(struct perf_event *event, char *fstr,
}
/* ready to consume more filters */
+ kfree(filename);
+ filename = NULL;
state = IF_STATE_ACTION;
filter = NULL;
+ kernel = 0;
}
}
--
2.34.1
From: Richard Schleich <[email protected]>
[ Upstream commit bdf8762da268d2a34abf517c36528413906e9cd5 ]
This patch fixes the kernel warning
"cacheinfo: Unable to detect cache hierarchy for CPU 0"
for the bcm2837 on newer kernel versions.
Signed-off-by: Richard Schleich <[email protected]>
Tested-by: Stefan Wahren <[email protected]>
[florian: Align and remove comments matching property values]
Signed-off-by: Florian Fainelli <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/bcm2837.dtsi | 49 ++++++++++++++++++++++++++++++++++
1 file changed, 49 insertions(+)
diff --git a/arch/arm/boot/dts/bcm2837.dtsi b/arch/arm/boot/dts/bcm2837.dtsi
index 0199ec98cd61..5dbdebc46259 100644
--- a/arch/arm/boot/dts/bcm2837.dtsi
+++ b/arch/arm/boot/dts/bcm2837.dtsi
@@ -40,12 +40,26 @@
#size-cells = <0>;
enable-method = "brcm,bcm2836-smp"; // for ARM 32-bit
+ /* Source for d/i-cache-line-size and d/i-cache-sets
+ * https://developer.arm.com/documentation/ddi0500/e/level-1-memory-system
+ * /about-the-l1-memory-system?lang=en
+ *
+ * Source for d/i-cache-size
+ * https://magpi.raspberrypi.com/articles/raspberry-pi-3-specs-benchmarks
+ */
cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0>;
enable-method = "spin-table";
cpu-release-addr = <0x0 0x000000d8>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+ i-cache-size = <0x8000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+ next-level-cache = <&l2>;
};
cpu1: cpu@1 {
@@ -54,6 +68,13 @@
reg = <1>;
enable-method = "spin-table";
cpu-release-addr = <0x0 0x000000e0>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+ i-cache-size = <0x8000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+ next-level-cache = <&l2>;
};
cpu2: cpu@2 {
@@ -62,6 +83,13 @@
reg = <2>;
enable-method = "spin-table";
cpu-release-addr = <0x0 0x000000e8>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+ i-cache-size = <0x8000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+ next-level-cache = <&l2>;
};
cpu3: cpu@3 {
@@ -70,6 +98,27 @@
reg = <3>;
enable-method = "spin-table";
cpu-release-addr = <0x0 0x000000f0>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+ i-cache-size = <0x8000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+ next-level-cache = <&l2>;
+ };
+
+ /* Source for cache-line-size + cache-sets
+ * https://developer.arm.com/documentation/ddi0500
+ * /e/level-2-memory-system/about-the-l2-memory-system?lang=en
+ * Source for cache-size
+ * https://datasheets.raspberrypi.com/cm/cm1-and-cm3-datasheet.pdf
+ */
+ l2: l2-cache0 {
+ compatible = "cache";
+ cache-size = <0x80000>;
+ cache-line-size = <64>;
+ cache-sets = <512>; // 512KiB(size)/64(line-size)=8192ways/16-way set
+ cache-level = <2>;
};
};
};
--
2.34.1
From: Duoming Zhou <[email protected]>
commit efe4186e6a1b54bf38b9e05450d43b0da1fd7739 upstream.
When a 6pack device is detaching, the sixpack_close() will act to cleanup
necessary resources. Although del_timer_sync() in sixpack_close()
won't return if there is an active timer, one could use mod_timer() in
sp_xmit_on_air() to wake up timer again by calling userspace syscall such
as ax25_sendmsg(), ax25_connect() and ax25_ioctl().
This unexpected waked handler, sp_xmit_on_air(), realizes nothing about
the undergoing cleanup and may still call pty_write() to use driver layer
resources that have already been released.
One of the possible race conditions is shown below:
(USE) | (FREE)
ax25_sendmsg() |
ax25_queue_xmit() |
... |
sp_xmit() |
sp_encaps() | sixpack_close()
sp_xmit_on_air() | del_timer_sync(&sp->tx_t)
mod_timer(&sp->tx_t,...) | ...
| unregister_netdev()
| ...
(wait a while) | tty_release()
| tty_release_struct()
| release_tty()
sp_xmit_on_air() | tty_kref_put(tty_struct) //FREE
pty_write(tty_struct) //USE | ...
The corresponding fail log is shown below:
===============================================================
BUG: KASAN: use-after-free in __run_timers.part.0+0x170/0x470
Write of size 8 at addr ffff88800a652ab8 by task swapper/2/0
...
Call Trace:
...
queue_work_on+0x3f/0x50
pty_write+0xcd/0xe0pty_write+0xcd/0xe0
sp_xmit_on_air+0xb2/0x1f0
call_timer_fn+0x28/0x150
__run_timers.part.0+0x3c2/0x470
run_timer_softirq+0x3b/0x80
__do_softirq+0xf1/0x380
...
This patch reorders the del_timer_sync() after the unregister_netdev()
to avoid UAF bugs. Because the unregister_netdev() is well synchronized,
it flushs out any pending queues, waits the refcount of net_device
decreases to zero and removes net_device from kernel. There is not any
running routines after executing unregister_netdev(). Therefore, we could
not arouse timer from userspace again.
Signed-off-by: Duoming Zhou <[email protected]>
Reviewed-by: Lin Ma <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/hamradio/6pack.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/net/hamradio/6pack.c
+++ b/drivers/net/hamradio/6pack.c
@@ -674,14 +674,14 @@ static void sixpack_close(struct tty_str
*/
netif_stop_queue(sp->dev);
+ unregister_netdev(sp->dev);
+
del_timer_sync(&sp->tx_t);
del_timer_sync(&sp->resync_t);
/* Free all 6pack frame buffers. */
kfree(sp->rbuff);
kfree(sp->xbuff);
-
- unregister_netdev(sp->dev);
}
/* Perform I/O control on an active 6pack channel. */
From: Charan Teja Kalla <[email protected]>
commit 5bd009c7c9a9e888077c07535dc0c70aeab242c3 upstream.
Patch series "mm: madvise: return correct bytes processed with
process_madvise", v2. With the process_madvise(), always choose to return
non zero processed bytes over an error. This can help the user to know on
which VMA, passed in the 'struct iovec' vector list, is failed to advise
thus can take the decission of retrying/skipping on that VMA.
This patch (of 2):
The process_madvise() system call returns error even after processing some
VMA's passed in the 'struct iovec' vector list which leaves the user
confused to know where to restart the advise next. It is also against
this syscall man page[1] documentation where it mentions that "return
value may be less than the total number of requested bytes, if an error
occurred after some iovec elements were already processed.".
Consider a user passed 10 VMA's in the 'struct iovec' vector list of which
9 are processed but one. Then it just returns the error caused on that
failed VMA despite the first 9 VMA's processed, leaving the user confused
about on which VMA it is failed. Returning the number of bytes processed
here can help the user to know which VMA it is failed on and thus can
retry/skip the advise on that VMA.
[1]https://man7.org/linux/man-pages/man2/process_madvise.2.html.
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/125b61a0edcee5c2db8658aed9d06a43a19ccafc.1647008754.git.quic_charante@quicinc.com
Fixes: ecb8ac8b1f14("mm/madvise: introduce process_madvise() syscall: an external memory hinting API")
Signed-off-by: Charan Teja Kalla <[email protected]>
Cc: Suren Baghdasaryan <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Cc: David Rientjes <[email protected]>
Cc: Stephen Rothwell <[email protected]>
Cc: Minchan Kim <[email protected]>
Cc: Nadav Amit <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/madvise.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
--- a/mm/madvise.c
+++ b/mm/madvise.c
@@ -1236,8 +1236,7 @@ SYSCALL_DEFINE5(process_madvise, int, pi
iov_iter_advance(&iter, iovec.iov_len);
}
- if (ret == 0)
- ret = total_len - iov_iter_count(&iter);
+ ret = (total_len - iov_iter_count(&iter)) ? : ret;
release_mm:
mmput(mm);
From: Jiasheng Jiang <[email protected]>
[ Upstream commit 2ecf362d220317debf5da376e0390e9f7a3f7b29 ]
As the potential failure of the clk_enable(),
it should be better to check it, like mxs_saif_trigger().
Fixes: d0ba4c014934 ("ASoC: mxs-saif: set a base clock rate for EXTMASTER mode work")
Signed-off-by: Jiasheng Jiang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/mxs/mxs-saif.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/sound/soc/mxs/mxs-saif.c b/sound/soc/mxs/mxs-saif.c
index 07f8cf9980e3..f2eda81985e2 100644
--- a/sound/soc/mxs/mxs-saif.c
+++ b/sound/soc/mxs/mxs-saif.c
@@ -455,7 +455,10 @@ static int mxs_saif_hw_params(struct snd_pcm_substream *substream,
* basic clock which should be fast enough for the internal
* logic.
*/
- clk_enable(saif->clk);
+ ret = clk_enable(saif->clk);
+ if (ret)
+ return ret;
+
ret = clk_set_rate(saif->clk, 24000000);
clk_disable(saif->clk);
if (ret)
--
2.34.1
From: Oliver Hartkopp <[email protected]>
commit 3ea566422cbde9610c2734980d1286ab681bb40e upstream.
Syzbot created an environment that lead to a state machine status that
can not be reached with a compliant CAN ID address configuration.
The provided address information consisted of CAN ID 0x6000001 and 0xC28001
which both boil down to 11 bit CAN IDs 0x001 in sending and receiving.
Sanitize the SFF/EFF CAN ID values before performing the address checks.
Fixes: e057dd3fc20f ("can: add ISO 15765-2:2016 transport protocol")
Link: https://lore.kernel.org/all/[email protected]
Reported-by: [email protected]
Signed-off-by: Oliver Hartkopp <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/can/isotp.c | 38 ++++++++++++++++++++------------------
1 file changed, 20 insertions(+), 18 deletions(-)
--- a/net/can/isotp.c
+++ b/net/can/isotp.c
@@ -1102,6 +1102,7 @@ static int isotp_bind(struct socket *soc
struct net *net = sock_net(sk);
int ifindex;
struct net_device *dev;
+ canid_t tx_id, rx_id;
int err = 0;
int notify_enetdown = 0;
int do_rx_reg = 1;
@@ -1109,8 +1110,18 @@ static int isotp_bind(struct socket *soc
if (len < ISOTP_MIN_NAMELEN)
return -EINVAL;
- if (addr->can_addr.tp.tx_id & (CAN_ERR_FLAG | CAN_RTR_FLAG))
- return -EADDRNOTAVAIL;
+ /* sanitize tx/rx CAN identifiers */
+ tx_id = addr->can_addr.tp.tx_id;
+ if (tx_id & CAN_EFF_FLAG)
+ tx_id &= (CAN_EFF_FLAG | CAN_EFF_MASK);
+ else
+ tx_id &= CAN_SFF_MASK;
+
+ rx_id = addr->can_addr.tp.rx_id;
+ if (rx_id & CAN_EFF_FLAG)
+ rx_id &= (CAN_EFF_FLAG | CAN_EFF_MASK);
+ else
+ rx_id &= CAN_SFF_MASK;
if (!addr->can_ifindex)
return -ENODEV;
@@ -1122,21 +1133,13 @@ static int isotp_bind(struct socket *soc
do_rx_reg = 0;
/* do not validate rx address for functional addressing */
- if (do_rx_reg) {
- if (addr->can_addr.tp.rx_id == addr->can_addr.tp.tx_id) {
- err = -EADDRNOTAVAIL;
- goto out;
- }
-
- if (addr->can_addr.tp.rx_id & (CAN_ERR_FLAG | CAN_RTR_FLAG)) {
- err = -EADDRNOTAVAIL;
- goto out;
- }
+ if (do_rx_reg && rx_id == tx_id) {
+ err = -EADDRNOTAVAIL;
+ goto out;
}
if (so->bound && addr->can_ifindex == so->ifindex &&
- addr->can_addr.tp.rx_id == so->rxid &&
- addr->can_addr.tp.tx_id == so->txid)
+ rx_id == so->rxid && tx_id == so->txid)
goto out;
dev = dev_get_by_index(net, addr->can_ifindex);
@@ -1160,8 +1163,7 @@ static int isotp_bind(struct socket *soc
ifindex = dev->ifindex;
if (do_rx_reg)
- can_rx_register(net, dev, addr->can_addr.tp.rx_id,
- SINGLE_MASK(addr->can_addr.tp.rx_id),
+ can_rx_register(net, dev, rx_id, SINGLE_MASK(rx_id),
isotp_rcv, sk, "isotp", sk);
dev_put(dev);
@@ -1181,8 +1183,8 @@ static int isotp_bind(struct socket *soc
/* switch to new settings */
so->ifindex = ifindex;
- so->rxid = addr->can_addr.tp.rx_id;
- so->txid = addr->can_addr.tp.tx_id;
+ so->rxid = rx_id;
+ so->txid = tx_id;
so->bound = 1;
out:
From: Sean Young <[email protected]>
commit 5ad05ecad4326ddaa26a83ba2233a67be24c1aaa upstream.
Calling udelay for than 1000us does not always yield the correct
results.
Cc: [email protected]
Reported-by: Михаил <[email protected]>
Signed-off-by: Sean Young <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/rc/gpio-ir-tx.c | 28 +++++++++++++++++++++-------
1 file changed, 21 insertions(+), 7 deletions(-)
--- a/drivers/media/rc/gpio-ir-tx.c
+++ b/drivers/media/rc/gpio-ir-tx.c
@@ -48,11 +48,29 @@ static int gpio_ir_tx_set_carrier(struct
return 0;
}
+static void delay_until(ktime_t until)
+{
+ /*
+ * delta should never exceed 0.5 seconds (IR_MAX_DURATION) and on
+ * m68k ndelay(s64) does not compile; so use s32 rather than s64.
+ */
+ s32 delta;
+
+ while (true) {
+ delta = ktime_us_delta(until, ktime_get());
+ if (delta <= 0)
+ return;
+
+ /* udelay more than 1ms may not work */
+ delta = min(delta, 1000);
+ udelay(delta);
+ }
+}
+
static void gpio_ir_tx_unmodulated(struct gpio_ir *gpio_ir, uint *txbuf,
uint count)
{
ktime_t edge;
- s32 delta;
int i;
local_irq_disable();
@@ -63,9 +81,7 @@ static void gpio_ir_tx_unmodulated(struc
gpiod_set_value(gpio_ir->gpio, !(i % 2));
edge = ktime_add_us(edge, txbuf[i]);
- delta = ktime_us_delta(edge, ktime_get());
- if (delta > 0)
- udelay(delta);
+ delay_until(edge);
}
gpiod_set_value(gpio_ir->gpio, 0);
@@ -97,9 +113,7 @@ static void gpio_ir_tx_modulated(struct
if (i % 2) {
// space
edge = ktime_add_us(edge, txbuf[i]);
- delta = ktime_us_delta(edge, ktime_get());
- if (delta > 0)
- udelay(delta);
+ delay_until(edge);
} else {
// pulse
ktime_t last = ktime_add_us(edge, txbuf[i]);
From: Arnd Bergmann <[email protected]>
[ Upstream commit a97b693c3712f040c5802f32b2d685352e08cefa ]
These two architectures implement 8-byte get_user() through
a memcpy() into a four-byte variable, which won't fit.
Use a temporary 64-bit variable instead here, and use a double
cast the way that risc-v and openrisc do to avoid compile-time
warnings.
Fixes: 6a090e97972d ("arch/microblaze: support get_user() of size 8 bytes")
Fixes: 5ccc6af5e88e ("nios2: Memory management")
Reviewed-by: Christoph Hellwig <[email protected]>
Acked-by: Dinh Nguyen <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/microblaze/include/asm/uaccess.h | 18 +++++++++---------
arch/nios2/include/asm/uaccess.h | 26 ++++++++++++++++----------
2 files changed, 25 insertions(+), 19 deletions(-)
diff --git a/arch/microblaze/include/asm/uaccess.h b/arch/microblaze/include/asm/uaccess.h
index 304b04ffea2f..7c5d92e2915c 100644
--- a/arch/microblaze/include/asm/uaccess.h
+++ b/arch/microblaze/include/asm/uaccess.h
@@ -167,27 +167,27 @@ extern long __user_bad(void);
#define __get_user(x, ptr) \
({ \
- unsigned long __gu_val = 0; \
long __gu_err; \
switch (sizeof(*(ptr))) { \
case 1: \
- __get_user_asm("lbu", (ptr), __gu_val, __gu_err); \
+ __get_user_asm("lbu", (ptr), x, __gu_err); \
break; \
case 2: \
- __get_user_asm("lhu", (ptr), __gu_val, __gu_err); \
+ __get_user_asm("lhu", (ptr), x, __gu_err); \
break; \
case 4: \
- __get_user_asm("lw", (ptr), __gu_val, __gu_err); \
+ __get_user_asm("lw", (ptr), x, __gu_err); \
break; \
- case 8: \
- __gu_err = __copy_from_user(&__gu_val, ptr, 8); \
- if (__gu_err) \
- __gu_err = -EFAULT; \
+ case 8: { \
+ __u64 __x = 0; \
+ __gu_err = raw_copy_from_user(&__x, ptr, 8) ? \
+ -EFAULT : 0; \
+ (x) = (typeof(x))(typeof((x) - (x)))__x; \
break; \
+ } \
default: \
/* __gu_val = 0; __gu_err = -EINVAL;*/ __gu_err = __user_bad();\
} \
- x = (__force __typeof__(*(ptr))) __gu_val; \
__gu_err; \
})
diff --git a/arch/nios2/include/asm/uaccess.h b/arch/nios2/include/asm/uaccess.h
index a741abbed6fb..8a386e6c07df 100644
--- a/arch/nios2/include/asm/uaccess.h
+++ b/arch/nios2/include/asm/uaccess.h
@@ -89,6 +89,7 @@ extern __must_check long strnlen_user(const char __user *s, long n);
/* Optimized macros */
#define __get_user_asm(val, insn, addr, err) \
{ \
+ unsigned long __gu_val; \
__asm__ __volatile__( \
" movi %0, %3\n" \
"1: " insn " %1, 0(%2)\n" \
@@ -97,14 +98,20 @@ extern __must_check long strnlen_user(const char __user *s, long n);
" .section __ex_table,\"a\"\n" \
" .word 1b, 2b\n" \
" .previous" \
- : "=&r" (err), "=r" (val) \
+ : "=&r" (err), "=r" (__gu_val) \
: "r" (addr), "i" (-EFAULT)); \
+ val = (__force __typeof__(*(addr)))__gu_val; \
}
-#define __get_user_unknown(val, size, ptr, err) do { \
+extern void __get_user_unknown(void);
+
+#define __get_user_8(val, ptr, err) do { \
+ u64 __val = 0; \
err = 0; \
- if (__copy_from_user(&(val), ptr, size)) { \
+ if (raw_copy_from_user(&(__val), ptr, sizeof(val))) { \
err = -EFAULT; \
+ } else { \
+ val = (typeof(val))(typeof((val) - (val)))__val; \
} \
} while (0)
@@ -120,8 +127,11 @@ do { \
case 4: \
__get_user_asm(val, "ldw", ptr, err); \
break; \
+ case 8: \
+ __get_user_8(val, ptr, err); \
+ break; \
default: \
- __get_user_unknown(val, size, ptr, err); \
+ __get_user_unknown(); \
break; \
} \
} while (0)
@@ -130,9 +140,7 @@ do { \
({ \
long __gu_err = -EFAULT; \
const __typeof__(*(ptr)) __user *__gu_ptr = (ptr); \
- unsigned long __gu_val = 0; \
- __get_user_common(__gu_val, sizeof(*(ptr)), __gu_ptr, __gu_err);\
- (x) = (__force __typeof__(x))__gu_val; \
+ __get_user_common(x, sizeof(*(ptr)), __gu_ptr, __gu_err); \
__gu_err; \
})
@@ -140,11 +148,9 @@ do { \
({ \
long __gu_err = -EFAULT; \
const __typeof__(*(ptr)) __user *__gu_ptr = (ptr); \
- unsigned long __gu_val = 0; \
if (access_ok( __gu_ptr, sizeof(*__gu_ptr))) \
- __get_user_common(__gu_val, sizeof(*__gu_ptr), \
+ __get_user_common(x, sizeof(*__gu_ptr), \
__gu_ptr, __gu_err); \
- (x) = (__force __typeof__(x))__gu_val; \
__gu_err; \
})
--
2.34.1
From: Peng Liu <[email protected]>
[ Upstream commit bdd015f7b71b92c2e4ecabac689642cc72553e04 ]
In function kunit_test_timeout, it is declared "300 * MSEC_PER_SEC"
represent 5min. However, it is wrong when dealing with arm64 whose
default HZ = 250, or some other situations. Use msecs_to_jiffies to fix
this, and kunit_test_timeout will work as desired.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 5f3e06208920 ("kunit: test: add support for test abort")
Signed-off-by: Peng Liu <[email protected]>
Reviewed-by: Marco Elver <[email protected]>
Reviewed-by: Daniel Latypov <[email protected]>
Reviewed-by: Brendan Higgins <[email protected]>
Tested-by: Brendan Higgins <[email protected]>
Cc: Alexander Potapenko <[email protected]>
Cc: Dmitry Vyukov <[email protected]>
Cc: Wang Kefeng <[email protected]>
Cc: David Gow <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
lib/kunit/try-catch.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/lib/kunit/try-catch.c b/lib/kunit/try-catch.c
index 0dd434e40487..71e5c5853099 100644
--- a/lib/kunit/try-catch.c
+++ b/lib/kunit/try-catch.c
@@ -52,7 +52,7 @@ static unsigned long kunit_test_timeout(void)
* If tests timeout due to exceeding sysctl_hung_task_timeout_secs,
* the task will be killed and an oops generated.
*/
- return 300 * MSEC_PER_SEC; /* 5 min */
+ return 300 * msecs_to_jiffies(MSEC_PER_SEC); /* 5 min */
}
void kunit_try_catch_run(struct kunit_try_catch *try_catch, void *context)
--
2.34.1
From: David Heidelberg <[email protected]>
[ Upstream commit 625c24460dbbc3b6c9a148c0a30f0830893fc909 ]
replace millivolt with correct microvolt and adjust value to
the minimal value allowed by documentation.
Found with `make qcom/sdm845-oneplus-fajita.dtb`.
Fixes:
arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dt.yaml: codec@1: 'qcom,micbias1-microvolt' is a required property
From schema: Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml
arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dt.yaml: codec@1: 'qcom,micbias2-microvolt' is a required property
From schema: Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml
arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dt.yaml: codec@1: 'qcom,micbias3-microvolt' is a required property
From schema: Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml
arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dt.yaml: codec@1: 'qcom,micbias4-microvolt' is a required property
From schema: Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml
arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dt.yaml: codec@1: 'qcom,micbias1-millivolt', 'qcom,micbias2-millivolt', 'qcom,micbias3-millivolt', 'qcom,micbias4-millivolt' do not match any of the regexes: '^.*@[0-9a-f]+$', 'pinctrl-[0-9]+'
Fixes: 27ca1de07dc3 ("arm64: dts: qcom: sdm845: add slimbus nodes")
Signed-off-by: David Heidelberg <[email protected]>
Tested-by: Steev Klimaszewski <[email protected]>
Signed-off-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/qcom/sdm845.dtsi | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index ea6e3a11e641..9beb3c34fcdb 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -3406,10 +3406,10 @@
#clock-cells = <0>;
clock-frequency = <9600000>;
clock-output-names = "mclk";
- qcom,micbias1-millivolt = <1800>;
- qcom,micbias2-millivolt = <1800>;
- qcom,micbias3-millivolt = <1800>;
- qcom,micbias4-millivolt = <1800>;
+ qcom,micbias1-microvolt = <1800000>;
+ qcom,micbias2-microvolt = <1800000>;
+ qcom,micbias3-microvolt = <1800000>;
+ qcom,micbias4-microvolt = <1800000>;
#address-cells = <1>;
#size-cells = <1>;
--
2.34.1
Hi Greg,
On Tue, Apr 05, 2022 at 09:24:54AM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.110 release.
> There are 599 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 07 Apr 2022 07:01:33 +0000.
> Anything received after that time might be too late.
My tests are still running, but it failed to boot on my test laptop.
The trace is:
[ 2.194098] BUG: unable to handle page fault for address: ffffffffc0778fb5
[ 2.194791] #PF: supervisor write access in kernel mode
[ 2.195166] #PF: error_code(0x0003) - permissions violation
[ 2.195558] PGD 1bac14067 P4D 1bac14067 PUD 1bac16067 PMD 10aab8067 PTE 8000000110976061
[ 2.196124] Oops: 0003 [#1] SMP PTI
[ 2.196374] CPU: 5 PID: 217 Comm: modprobe Not tainted 5.10.110-rc1+ #33
[ 2.196846] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[ 2.197712] RIP: 0010:number+0x1d6/0x340
[ 2.198025] Code: 83 c3 01 89 c8 44 29 d8 39 c2 7e ea 45 85 c9 0f 88 72 01 00 00 4d 63 c9 4a 8d 54 0c 18 4b 8d 44 0b 01 4c 39 db 76 06 0f b6 0a <41> 88 0b 49 83 c3 01 48 83 ea 01 49 39 c3 75 e8 83 ed 01 0f 88 3c
[ 2.199654] RSP: 0018:ffffb61a4030fb08 EFLAGS: 00010206
[ 2.200126] RAX: ffffffffc0778fb7 RBX: ffffffffc0778fb8 RCX: 0000000000000031
[ 2.200630] RDX: ffffb61a4030fb21 RSI: 000000000000000a RDI: 0000000000000000
[ 2.201131] RBP: 00000000fffffffb R08: 0000000000ffff0a R09: 0000000000000001
[ 2.201635] R10: 3e2d434552202c29 R11: ffffffffc0778fb5 R12: 0000000000000020
[ 2.202140] R13: 0000000000000000 R14: 000000000000000a R15: 0000000000000000
[ 2.202641] FS: 00007fad7aa99580(0000) GS:ffff8c9537d40000(0000) knlGS:0000000000000000
[ 2.203212] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 2.203618] CR2: ffffffffc0778fb5 CR3: 000000011060c001 CR4: 0000000000370ee0
[ 2.204149] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 2.204682] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 2.205182] Call Trace:
[ 2.205371] ? cpumask_next+0x17/0x20
[ 2.205636] ? kvm_smp_send_call_func_ipi+0x1e/0x60
[ 2.205986] vsnprintf+0x363/0x560
[ 2.206233] snprintf+0x49/0x60
[ 2.206461] eval_replace+0x46/0x80
[ 2.206712] trace_event_eval_update+0x263/0x360
[ 2.207057] trace_module_notify+0x44/0x50
[ 2.207352] blocking_notifier_call_chain_robust+0x64/0xd0
[ 2.207774] ? mutex_lock+0xe/0x30
[ 2.208020] load_module+0x209c/0x28e0
[ 2.208291] ? __do_sys_finit_module+0xb1/0x110
[ 2.208613] __do_sys_finit_module+0xb1/0x110
[ 2.208926] do_syscall_64+0x33/0x80
[ 2.209184] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 2.209552] RIP: 0033:0x7fad7abb4f79
[ 2.209810] Code: 48 8d 3d da db 0d 00 0f 05 eb a5 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d c7 9e 0d 00 f7 d8 64 89 01 48
[ 2.211162] RSP: 002b:00007ffd607603c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[ 2.212293] RAX: ffffffffffffffda RBX: 0000557e2325bc20 RCX: 00007fad7abb4f79
[ 2.213374] RDX: 0000000000000000 RSI: 0000557e2193c260 RDI: 0000000000000004
[ 2.214495] RBP: 0000000000040000 R08: 0000000000000000 R09: 0000557e2325c620
[ 2.215743] R10: 0000000000000004 R11: 0000000000000246 R12: 0000557e2193c260
[ 2.216994] R13: 0000000000000000 R14: 0000557e2325bcb0 R15: 0000557e2325bc20
[ 2.218219] Modules linked in: ext4(+) crc32c_generic crc16 mbcache jbd2 sd_mod bochs_drm t10_pi drm_vram_helper crc_t10dif drm_ttm_helper sr_mod crct10dif_generic cdrom ttm xhci_pci ata_generic drm_kms_helper xhci_hcd cec ata_piix libata rc_core usbcore crct10dif_pclmul crct10dif_common crc32_pclmul psmouse drm crc32c_intel usb_common i2c_piix4 e1000 scsi_mod floppy button
[ 2.222206] CR2: ffffffffc0778fb5
[ 2.223103] ---[ end trace 036356107aad6aa1 ]---
Did a bisect and the bisect log is:
# bad: [45fdcc9dc72a44448666a2bcff4030a659e29e46] Linux 5.10.110-rc1
# good: [d9c5818a0bc09e4cc9fe663edb69e4d6cdae4f70] Linux 5.10.109
git bisect start 'HEAD' 'v5.10.109'
# good: [93a35ab24592dfddafdb9f184e9399aad6d88a18] drm/amd/display: Add affected crtcs to atomic state for dsc mst unplug
git bisect good 93a35ab24592dfddafdb9f184e9399aad6d88a18
# good: [c8816508edf3558f597bd20a01403b060d690700] regulator: rpi-panel: Handle I2C errors/timing to the Atmel
git bisect good c8816508edf3558f597bd20a01403b060d690700
# bad: [5e7fb97064ee7794db7ac938583c3d095980e55f] scsi: qla2xxx: Fix disk failure to rediscover
git bisect bad 5e7fb97064ee7794db7ac938583c3d095980e55f
# good: [3d65639a786b4587e64fb813a79a8f27b83dcaab] ARM: dts: qcom: fix gic_irq_domain_translate warnings for msm8960
git bisect good 3d65639a786b4587e64fb813a79a8f27b83dcaab
# good: [8bb857ae514a06d96a6ca81ff306acf5783d6cc6] media: Revert "media: em28xx: add missing em28xx_close_extension"
git bisect good 8bb857ae514a06d96a6ca81ff306acf5783d6cc6
# bad: [0042f52f784f847927f1ff234b3f97dd97ad8e48] powerpc/lib/sstep: Fix build errors with newer binutils
git bisect bad 0042f52f784f847927f1ff234b3f97dd97ad8e48
# bad: [690ee20444960ce5592465bce043ac5cd4ef8028] media: atomisp: fix bad usage at error handling logic
git bisect bad 690ee20444960ce5592465bce043ac5cd4ef8028
# bad: [93fe2389e6fd4c545920f6bd013b36f9328b636e] tracing: Have TRACE_DEFINE_ENUM affect trace event types as well
git bisect bad 93fe2389e6fd4c545920f6bd013b36f9328b636e
# good: [1fe212d441b683685c2900bd4353f53f7f608db9] media: hdpvr: initialize dev->worker at hdpvr_register_videodev
git bisect good 1fe212d441b683685c2900bd4353f53f7f608db9
# first bad commit: [93fe2389e6fd4c545920f6bd013b36f9328b636e] tracing: Have TRACE_DEFINE_ENUM affect trace event types as well
And, reverting 93fe2389e6fd4c545920f6bd013b36f9328b636e on top of v5.10.110-rc1
fixed the problem.
--
Regards
Sudip
From: Miaoqian Lin <[email protected]>
[ Upstream commit 221e3638feb8bc42143833c9a704fa89b6c366bb ]
The reference taken by 'of_find_device_by_node()' must be released when
not needed anymore. Add put_device() call to fix this.
Fixes: e94236cde4d5 ("drm/tegra: dsi: Add ganged mode support")
Signed-off-by: Miaoqian Lin <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/tegra/dsi.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/tegra/dsi.c b/drivers/gpu/drm/tegra/dsi.c
index f46d377f0c30..de1333dc0d86 100644
--- a/drivers/gpu/drm/tegra/dsi.c
+++ b/drivers/gpu/drm/tegra/dsi.c
@@ -1538,8 +1538,10 @@ static int tegra_dsi_ganged_probe(struct tegra_dsi *dsi)
dsi->slave = platform_get_drvdata(gangster);
of_node_put(np);
- if (!dsi->slave)
+ if (!dsi->slave) {
+ put_device(&gangster->dev);
return -EPROBE_DEFER;
+ }
dsi->slave->master = dsi;
}
--
2.34.1
From: Max Filippov <[email protected]>
commit a3d0245c58f962ee99d4440ea0eaf45fb7f5a5cc upstream.
The commit cad6fade6e78 ("xtensa: clean up WSR*/RSR*/get_sr/set_sr")
replaced 'WSR' macro in the function xtensa_wsr with 'xtensa_set_sr',
but variable 'v' in the xtensa_set_sr body shadowed the argument 'v'
passed to it, resulting in wrong value written to debug registers.
Fix that by removing intermediate variable from the xtensa_set_sr
macro body.
Cc: [email protected]
Fixes: cad6fade6e78 ("xtensa: clean up WSR*/RSR*/get_sr/set_sr")
Signed-off-by: Max Filippov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/xtensa/include/asm/processor.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/arch/xtensa/include/asm/processor.h
+++ b/arch/xtensa/include/asm/processor.h
@@ -226,8 +226,8 @@ extern unsigned long get_wchan(struct ta
#define xtensa_set_sr(x, sr) \
({ \
- unsigned int v = (unsigned int)(x); \
- __asm__ __volatile__ ("wsr %0, "__stringify(sr) :: "a"(v)); \
+ __asm__ __volatile__ ("wsr %0, "__stringify(sr) :: \
+ "a"((unsigned int)(x))); \
})
#define xtensa_get_sr(sr) \
From: Codrin Ciubotariu <[email protected]>
[ Upstream commit 9a1e13440a4f2e7566fd4c5eae6a53e6400e08a4 ]
Even if struct snd_dmaengine_pcm_config is used, prepare_slave_config()
callback might not be set. Check if this callback is set before using it.
Fixes: fa654e085300 ("ASoC: dmaengine-pcm: Provide default config")
Signed-off-by: Codrin Ciubotariu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/soc-generic-dmaengine-pcm.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/sound/soc/soc-generic-dmaengine-pcm.c b/sound/soc/soc-generic-dmaengine-pcm.c
index 9ef80a48707e..0d100b4e43f7 100644
--- a/sound/soc/soc-generic-dmaengine-pcm.c
+++ b/sound/soc/soc-generic-dmaengine-pcm.c
@@ -83,10 +83,10 @@ static int dmaengine_pcm_hw_params(struct snd_soc_component *component,
memset(&slave_config, 0, sizeof(slave_config));
- if (!pcm->config)
- prepare_slave_config = snd_dmaengine_pcm_prepare_slave_config;
- else
+ if (pcm->config && pcm->config->prepare_slave_config)
prepare_slave_config = pcm->config->prepare_slave_config;
+ else
+ prepare_slave_config = snd_dmaengine_pcm_prepare_slave_config;
if (prepare_slave_config) {
ret = prepare_slave_config(substream, params, &slave_config);
--
2.34.1
From: Miaoqian Lin <[email protected]>
[ Upstream commit e84ee1a75f944a0fe3c277aaa10c426603d2b0bc ]
Add the missing iounmap() before return from asic3_mfd_probe
in the error handling case.
Fixes: 64e8867ba809 ("mfd: tmio_mmc hardware abstraction for CNF area")
Signed-off-by: Miaoqian Lin <[email protected]>
Signed-off-by: Lee Jones <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mfd/asic3.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/drivers/mfd/asic3.c b/drivers/mfd/asic3.c
index a6bd2134cea2..14e4bbe6a9da 100644
--- a/drivers/mfd/asic3.c
+++ b/drivers/mfd/asic3.c
@@ -914,14 +914,14 @@ static int __init asic3_mfd_probe(struct platform_device *pdev,
ret = mfd_add_devices(&pdev->dev, pdev->id,
&asic3_cell_ds1wm, 1, mem, asic->irq_base, NULL);
if (ret < 0)
- goto out;
+ goto out_unmap;
}
if (mem_sdio && (irq >= 0)) {
ret = mfd_add_devices(&pdev->dev, pdev->id,
&asic3_cell_mmc, 1, mem_sdio, irq, NULL);
if (ret < 0)
- goto out;
+ goto out_unmap;
}
ret = 0;
@@ -935,8 +935,12 @@ static int __init asic3_mfd_probe(struct platform_device *pdev,
ret = mfd_add_devices(&pdev->dev, 0,
asic3_cell_leds, ASIC3_NUM_LEDS, NULL, 0, NULL);
}
+ return ret;
- out:
+out_unmap:
+ if (asic->tmio_cnf)
+ iounmap(asic->tmio_cnf);
+out:
return ret;
}
--
2.34.1
From: Arınç ÜNAL <[email protected]>
[ Upstream commit 6256e18686158fa49e019297f990f1c1817aabf1 ]
Fix LED and pinctrl definitions on the GB-PC1 devicetree. Refer to the
schematics of the device for more information.
LED fixes:
- Change GPIO6 LED label from system to power as GPIO6 is connected to
PLED.
- Add default-on default-trigger to power LED.
- Change GPIO8 LED label from status to system as GPIO8 is connected to
SYS_LED.
- Add disk-activity default-trigger to system LED.
- Switch to the color:function naming scheme.
- Remove lan1 and lan2 LEDs as they don't exist.
Pinctrl fixes:
- Claim state_default node under pinctrl node.
- Change pinctrl0 node name to state-default.
- Change gpio node name to gpio-pinmux to respect
Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinmux.yaml.
- Sort pin groups alphabetically.
Misc fixes:
- Fix formatting.
- Use the status value "okay".
- Define hexadecimal addresses in lower case.
- Make hexadecimal addresses for memory easier to read.
Link: https://github.com/ngiger/GnuBee_Docs/blob/master/GB-PCx/Documents/GB-PC1_V1.0_Schematic.pdf
Tested-by: Sergio Paracuellos <[email protected]>
Signed-off-by: Arınç ÜNAL <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/staging/mt7621-dts/gbpc1.dts | 40 +++++++++++++---------------
1 file changed, 18 insertions(+), 22 deletions(-)
diff --git a/drivers/staging/mt7621-dts/gbpc1.dts b/drivers/staging/mt7621-dts/gbpc1.dts
index a7c0d3115d72..d48ca5a25c2c 100644
--- a/drivers/staging/mt7621-dts/gbpc1.dts
+++ b/drivers/staging/mt7621-dts/gbpc1.dts
@@ -11,7 +11,8 @@
memory@0 {
device_type = "memory";
- reg = <0x0 0x1c000000>, <0x20000000 0x4000000>;
+ reg = <0x00000000 0x1c000000>,
+ <0x20000000 0x04000000>;
};
chosen {
@@ -37,24 +38,16 @@
gpio-leds {
compatible = "gpio-leds";
- system {
- label = "gb-pc1:green:system";
+ power {
+ label = "green:power";
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-on";
};
- status {
- label = "gb-pc1:green:status";
+ system {
+ label = "green:system";
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
- };
-
- lan1 {
- label = "gb-pc1:green:lan1";
- gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
- };
-
- lan2 {
- label = "gb-pc1:green:lan2";
- gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "disk-activity";
};
};
};
@@ -94,9 +87,8 @@
partition@50000 {
label = "firmware";
- reg = <0x50000 0x1FB0000>;
+ reg = <0x50000 0x1fb0000>;
};
-
};
};
@@ -122,9 +114,12 @@
};
&pinctrl {
- state_default: pinctrl0 {
- default_gpio: gpio {
- groups = "wdt", "rgmii2", "uart3";
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: state-default {
+ gpio-pinmux {
+ groups = "rgmii2", "uart3", "wdt";
function = "gpio";
};
};
@@ -133,12 +128,13 @@
&switch0 {
ports {
port@0 {
+ status = "okay";
label = "ethblack";
- status = "ok";
};
+
port@4 {
+ status = "okay";
label = "ethblue";
- status = "ok";
};
};
};
--
2.34.1
From: Miaoqian Lin <[email protected]>
[ Upstream commit 07a5dcc4bed9d7cae54adf5aa10ff9f037a3204b ]
The device_node pointer is returned by of_parse_phandle() or
of_get_child_by_name() with refcount incremented.
We should use of_node_put() on it when done.
This function only call of_node_put(node) when of_address_to_resource
succeeds, missing error cases.
Fixes: 278d744c46fd ("remoteproc: qcom: Fix potential device node leaks")
Fixes: 051fb70fd4ea ("remoteproc: qcom: Driver for the self-authenticating Hexagon v5")
Signed-off-by: Miaoqian Lin <[email protected]>
Signed-off-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/remoteproc/qcom_q6v5_mss.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
diff --git a/drivers/remoteproc/qcom_q6v5_mss.c b/drivers/remoteproc/qcom_q6v5_mss.c
index ebc3e755bcbc..1b3aa84e36e7 100644
--- a/drivers/remoteproc/qcom_q6v5_mss.c
+++ b/drivers/remoteproc/qcom_q6v5_mss.c
@@ -1594,18 +1594,20 @@ static int q6v5_alloc_memory_region(struct q6v5 *qproc)
* reserved memory regions from device's memory-region property.
*/
child = of_get_child_by_name(qproc->dev->of_node, "mba");
- if (!child)
+ if (!child) {
node = of_parse_phandle(qproc->dev->of_node,
"memory-region", 0);
- else
+ } else {
node = of_parse_phandle(child, "memory-region", 0);
+ of_node_put(child);
+ }
ret = of_address_to_resource(node, 0, &r);
+ of_node_put(node);
if (ret) {
dev_err(qproc->dev, "unable to resolve mba region\n");
return ret;
}
- of_node_put(node);
qproc->mba_phys = r.start;
qproc->mba_size = resource_size(&r);
@@ -1622,14 +1624,15 @@ static int q6v5_alloc_memory_region(struct q6v5 *qproc)
} else {
child = of_get_child_by_name(qproc->dev->of_node, "mpss");
node = of_parse_phandle(child, "memory-region", 0);
+ of_node_put(child);
}
ret = of_address_to_resource(node, 0, &r);
+ of_node_put(node);
if (ret) {
dev_err(qproc->dev, "unable to resolve mpss region\n");
return ret;
}
- of_node_put(node);
qproc->mpss_phys = qproc->mpss_reloc = r.start;
qproc->mpss_size = resource_size(&r);
--
2.34.1
From: Jernej Skrabec <[email protected]>
[ Upstream commit ee8b887329c78971967506f3ac79b9302c9f83c1 ]
Neighbour info buffer size needs to be 794 kiB in H6. This is actually
already indirectly mentioned in the comment, but smaller size is used
nevertheless.
Increase buffer size to cover H6 needs. Since increase is not that big
in absolute numbers, it doesn't make sense to complicate logic for older
generations.
Bug was discovered using iommu, which reported access error when trying
to play H265 video.
Fixes: 86caab29da78 ("media: cedrus: Add HEVC/H.265 decoding support")
Signed-off-by: Jernej Skrabec <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/staging/media/sunxi/cedrus/cedrus_h265.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/staging/media/sunxi/cedrus/cedrus_h265.c b/drivers/staging/media/sunxi/cedrus/cedrus_h265.c
index 10744fab7cea..368439cf5e17 100644
--- a/drivers/staging/media/sunxi/cedrus/cedrus_h265.c
+++ b/drivers/staging/media/sunxi/cedrus/cedrus_h265.c
@@ -23,7 +23,7 @@
* Subsequent BSP implementations seem to double the neighbor info buffer size
* for the H6 SoC, which may be related to 10 bit H265 support.
*/
-#define CEDRUS_H265_NEIGHBOR_INFO_BUF_SIZE (397 * SZ_1K)
+#define CEDRUS_H265_NEIGHBOR_INFO_BUF_SIZE (794 * SZ_1K)
#define CEDRUS_H265_ENTRY_POINTS_BUF_SIZE (4 * SZ_1K)
#define CEDRUS_H265_MV_COL_BUF_UNIT_CTB_SIZE 160
--
2.34.1
From: Ye Bin <[email protected]>
commit 7aab5c84a0f6ec2290e2ba4a6b245178b1bf949a upstream.
We inject IO error when rmdir non empty direcory, then got issue as follows:
step1: mkfs.ext4 -F /dev/sda
step2: mount /dev/sda test
step3: cd test
step4: mkdir -p 1/2
step5: rmdir 1
[ 110.920551] ext4_empty_dir: inject fault
[ 110.921926] EXT4-fs warning (device sda): ext4_rmdir:3113: inode #12:
comm rmdir: empty directory '1' has too many links (3)
step6: cd ..
step7: umount test
step8: fsck.ext4 -f /dev/sda
e2fsck 1.42.9 (28-Dec-2013)
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Entry '..' in .../??? (13) has deleted/unused inode 12. Clear<y>? yes
Pass 3: Checking directory connectivity
Unconnected directory inode 13 (...)
Connect to /lost+found<y>? yes
Pass 4: Checking reference counts
Inode 13 ref count is 3, should be 2. Fix<y>? yes
Pass 5: Checking group summary information
/dev/sda: ***** FILE SYSTEM WAS MODIFIED *****
/dev/sda: 12/131072 files (0.0% non-contiguous), 26157/524288 blocks
ext4_rmdir
if (!ext4_empty_dir(inode))
goto end_rmdir;
ext4_empty_dir
bh = ext4_read_dirblock(inode, 0, DIRENT_HTREE);
if (IS_ERR(bh))
return true;
Now if read directory block failed, 'ext4_empty_dir' will return true, assume
directory is empty. Obviously, it will lead to above issue.
To solve this issue, if read directory block failed 'ext4_empty_dir' just
return false. To avoid making things worse when file system is already
corrupted, 'ext4_empty_dir' also return false.
Signed-off-by: Ye Bin <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/inline.c | 9 ++++-----
fs/ext4/namei.c | 10 +++++-----
2 files changed, 9 insertions(+), 10 deletions(-)
--- a/fs/ext4/inline.c
+++ b/fs/ext4/inline.c
@@ -1768,19 +1768,20 @@ bool empty_inline_dir(struct inode *dir,
void *inline_pos;
unsigned int offset;
struct ext4_dir_entry_2 *de;
- bool ret = true;
+ bool ret = false;
err = ext4_get_inode_loc(dir, &iloc);
if (err) {
EXT4_ERROR_INODE_ERR(dir, -err,
"error %d getting inode %lu block",
err, dir->i_ino);
- return true;
+ return false;
}
down_read(&EXT4_I(dir)->xattr_sem);
if (!ext4_has_inline_data(dir)) {
*has_inline_data = 0;
+ ret = true;
goto out;
}
@@ -1789,7 +1790,6 @@ bool empty_inline_dir(struct inode *dir,
ext4_warning(dir->i_sb,
"bad inline directory (dir #%lu) - no `..'",
dir->i_ino);
- ret = true;
goto out;
}
@@ -1808,16 +1808,15 @@ bool empty_inline_dir(struct inode *dir,
dir->i_ino, le32_to_cpu(de->inode),
le16_to_cpu(de->rec_len), de->name_len,
inline_size);
- ret = true;
goto out;
}
if (le32_to_cpu(de->inode)) {
- ret = false;
goto out;
}
offset += ext4_rec_len_from_disk(de->rec_len, inline_size);
}
+ ret = true;
out:
up_read(&EXT4_I(dir)->xattr_sem);
brelse(iloc.bh);
--- a/fs/ext4/namei.c
+++ b/fs/ext4/namei.c
@@ -2868,14 +2868,14 @@ bool ext4_empty_dir(struct inode *inode)
sb = inode->i_sb;
if (inode->i_size < EXT4_DIR_REC_LEN(1) + EXT4_DIR_REC_LEN(2)) {
EXT4_ERROR_INODE(inode, "invalid size");
- return true;
+ return false;
}
/* The first directory block must not be a hole,
* so treat it as DIRENT_HTREE
*/
bh = ext4_read_dirblock(inode, 0, DIRENT_HTREE);
if (IS_ERR(bh))
- return true;
+ return false;
de = (struct ext4_dir_entry_2 *) bh->b_data;
if (ext4_check_dir_entry(inode, NULL, de, bh, bh->b_data, bh->b_size,
@@ -2883,7 +2883,7 @@ bool ext4_empty_dir(struct inode *inode)
le32_to_cpu(de->inode) != inode->i_ino || strcmp(".", de->name)) {
ext4_warning_inode(inode, "directory missing '.'");
brelse(bh);
- return true;
+ return false;
}
offset = ext4_rec_len_from_disk(de->rec_len, sb->s_blocksize);
de = ext4_next_entry(de, sb->s_blocksize);
@@ -2892,7 +2892,7 @@ bool ext4_empty_dir(struct inode *inode)
le32_to_cpu(de->inode) == 0 || strcmp("..", de->name)) {
ext4_warning_inode(inode, "directory missing '..'");
brelse(bh);
- return true;
+ return false;
}
offset += ext4_rec_len_from_disk(de->rec_len, sb->s_blocksize);
while (offset < inode->i_size) {
@@ -2906,7 +2906,7 @@ bool ext4_empty_dir(struct inode *inode)
continue;
}
if (IS_ERR(bh))
- return true;
+ return false;
}
de = (struct ext4_dir_entry_2 *) (bh->b_data +
(offset & (sb->s_blocksize - 1)));
From: Guillaume Nault <[email protected]>
[ Upstream commit 544b4dd568e3b09c1ab38a759d3187e7abda11a0 ]
The PMTU update and ICMP redirect helper functions initialise their fl4
variable with either __build_flow_key() or build_sk_flow_key(). These
initialisation functions always set ->flowi4_scope with
RT_SCOPE_UNIVERSE and might set the ECN bits of ->flowi4_tos. This is
not a problem when the route lookup is later done via
ip_route_output_key_hash(), which properly clears the ECN bits from
->flowi4_tos and initialises ->flowi4_scope based on the RTO_ONLINK
flag. However, some helpers call fib_lookup() directly, without
sanitising the tos and scope fields, so the route lookup can fail and,
as a result, the ICMP redirect or PMTU update aren't taken into
account.
Fix this by extracting the ->flowi4_tos and ->flowi4_scope sanitisation
code into ip_rt_fix_tos(), then use this function in handlers that call
fib_lookup() directly.
Note 1: We can't sanitise ->flowi4_tos and ->flowi4_scope in a central
place (like __build_flow_key() or flowi4_init_output()), because
ip_route_output_key_hash() expects non-sanitised values. When called
with sanitised values, it can erroneously overwrite RT_SCOPE_LINK with
RT_SCOPE_UNIVERSE in ->flowi4_scope. Therefore we have to be careful to
sanitise the values only for those paths that don't call
ip_route_output_key_hash().
Note 2: The problem is mostly about sanitising ->flowi4_tos. Having
->flowi4_scope initialised with RT_SCOPE_UNIVERSE instead of
RT_SCOPE_LINK probably wasn't really a problem: sockets with the
SOCK_LOCALROUTE flag set (those that'd result in RTO_ONLINK being set)
normally shouldn't receive ICMP redirects or PMTU updates.
Fixes: 4895c771c7f0 ("ipv4: Add FIB nexthop exceptions.")
Signed-off-by: Guillaume Nault <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/ipv4/route.c | 18 ++++++++++++++----
1 file changed, 14 insertions(+), 4 deletions(-)
diff --git a/net/ipv4/route.c b/net/ipv4/route.c
index ce787c386793..c72d0de8bf71 100644
--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -529,6 +529,15 @@ void __ip_select_ident(struct net *net, struct iphdr *iph, int segs)
}
EXPORT_SYMBOL(__ip_select_ident);
+static void ip_rt_fix_tos(struct flowi4 *fl4)
+{
+ __u8 tos = RT_FL_TOS(fl4);
+
+ fl4->flowi4_tos = tos & IPTOS_RT_MASK;
+ fl4->flowi4_scope = tos & RTO_ONLINK ?
+ RT_SCOPE_LINK : RT_SCOPE_UNIVERSE;
+}
+
static void __build_flow_key(const struct net *net, struct flowi4 *fl4,
const struct sock *sk,
const struct iphdr *iph,
@@ -853,6 +862,7 @@ static void ip_do_redirect(struct dst_entry *dst, struct sock *sk, struct sk_buf
rt = (struct rtable *) dst;
__build_flow_key(net, &fl4, sk, iph, oif, tos, prot, mark, 0);
+ ip_rt_fix_tos(&fl4);
__ip_do_redirect(rt, skb, &fl4, true);
}
@@ -1077,6 +1087,7 @@ static void ip_rt_update_pmtu(struct dst_entry *dst, struct sock *sk,
struct flowi4 fl4;
ip_rt_build_flow_key(&fl4, sk, skb);
+ ip_rt_fix_tos(&fl4);
/* Don't make lookup fail for bridged encapsulations */
if (skb && netif_is_any_bridge_port(skb->dev))
@@ -1151,6 +1162,8 @@ void ipv4_sk_update_pmtu(struct sk_buff *skb, struct sock *sk, u32 mtu)
goto out;
new = true;
+ } else {
+ ip_rt_fix_tos(&fl4);
}
__ip_rt_update_pmtu((struct rtable *)xfrm_dst_path(&rt->dst), &fl4, mtu);
@@ -2524,7 +2537,6 @@ static struct rtable *__mkroute_output(const struct fib_result *res,
struct rtable *ip_route_output_key_hash(struct net *net, struct flowi4 *fl4,
const struct sk_buff *skb)
{
- __u8 tos = RT_FL_TOS(fl4);
struct fib_result res = {
.type = RTN_UNSPEC,
.fi = NULL,
@@ -2534,9 +2546,7 @@ struct rtable *ip_route_output_key_hash(struct net *net, struct flowi4 *fl4,
struct rtable *rth;
fl4->flowi4_iif = LOOPBACK_IFINDEX;
- fl4->flowi4_tos = tos & IPTOS_RT_MASK;
- fl4->flowi4_scope = ((tos & RTO_ONLINK) ?
- RT_SCOPE_LINK : RT_SCOPE_UNIVERSE);
+ ip_rt_fix_tos(fl4);
rcu_read_lock();
rth = ip_route_output_key_hash_rcu(net, fl4, &res, skb);
--
2.34.1
From: Miquel Raynal <[email protected]>
commit 0e7f1b557974ce297e5e4c9d4245720fbb489886 upstream.
The controller properties should be in the controller 'parent' node,
while properties in the children nodes are specific to the NAND
*chip*. This error was already present during the yaml conversion.
Fixes: 2d472aba15ff ("mtd: nand: document the NAND controller/NAND chip DT representation")
Signed-off-by: Miquel Raynal <[email protected]>
Acked-by: Rob Herring <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
Documentation/devicetree/bindings/mtd/nand-controller.yaml | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/Documentation/devicetree/bindings/mtd/nand-controller.yaml
+++ b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
@@ -174,6 +174,6 @@ examples:
nand-ecc-mode = "soft";
nand-ecc-algo = "bch";
- /* controller specific properties */
+ /* NAND chip specific properties */
};
};
From: Jiasheng Jiang <[email protected]>
[ Upstream commit 9c27896ac1bb83ea5c461ce6f7089d02102a2b21 ]
As the potential failure of the pci_enable_device(),
it should be better to check the return value and return
error if fails.
Fixes: 70b2f993ea4a ("habanalabs: create common folder")
Signed-off-by: Jiasheng Jiang <[email protected]>
Reviewed-by: Oded Gabbay <[email protected]>
Signed-off-by: Oded Gabbay <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/misc/habanalabs/common/debugfs.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/misc/habanalabs/common/debugfs.c b/drivers/misc/habanalabs/common/debugfs.c
index 912ddfa360b1..9716b0728b30 100644
--- a/drivers/misc/habanalabs/common/debugfs.c
+++ b/drivers/misc/habanalabs/common/debugfs.c
@@ -859,6 +859,8 @@ static ssize_t hl_set_power_state(struct file *f, const char __user *buf,
pci_set_power_state(hdev->pdev, PCI_D0);
pci_restore_state(hdev->pdev);
rc = pci_enable_device(hdev->pdev);
+ if (rc < 0)
+ return rc;
} else if (value == 2) {
pci_save_state(hdev->pdev);
pci_disable_device(hdev->pdev);
--
2.34.1
From: Alistair Delva <[email protected]>
commit f89672cc3681952f2d06314981a6b45f8b0045d1 upstream.
Check count for 0, to avoid a potential underflow. Make the check the
same as the one in rproc_recovery_write().
Fixes: 3afdc59e4390 ("remoteproc: Add coredump debugfs entry")
Signed-off-by: Alistair Delva <[email protected]>
Cc: Rishabh Bhatnagar <[email protected]>
Cc: [email protected]
Cc: Ohad Ben-Cohen <[email protected]>
Cc: Bjorn Andersson <[email protected]>
Cc: Mathieu Poirier <[email protected]>
Cc: Sibi Sankar <[email protected]>
Cc: [email protected]
Cc: [email protected]
Reviewed-by: Bjorn Andersson <[email protected]>
Signed-off-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/remoteproc/remoteproc_debugfs.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/remoteproc/remoteproc_debugfs.c
+++ b/drivers/remoteproc/remoteproc_debugfs.c
@@ -76,7 +76,7 @@ static ssize_t rproc_coredump_write(stru
int ret, err = 0;
char buf[20];
- if (count > sizeof(buf))
+ if (count < 1 || count > sizeof(buf))
return -EINVAL;
ret = copy_from_user(buf, user_buf, count);
From: Casey Schaufler <[email protected]>
[ Upstream commit a5cd1ab7ab679d252a6d2f483eee7d45ebf2040c ]
Remove inappropriate use of ntohs() and assign the
port value directly.
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Casey Schaufler <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
security/smack/smack_lsm.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/security/smack/smack_lsm.c b/security/smack/smack_lsm.c
index 5c90b9fa4d40..b36b8668f1f4 100644
--- a/security/smack/smack_lsm.c
+++ b/security/smack/smack_lsm.c
@@ -2506,7 +2506,7 @@ static int smk_ipv6_check(struct smack_known *subject,
#ifdef CONFIG_AUDIT
smk_ad_init_net(&ad, __func__, LSM_AUDIT_DATA_NET, &net);
ad.a.u.net->family = PF_INET6;
- ad.a.u.net->dport = ntohs(address->sin6_port);
+ ad.a.u.net->dport = address->sin6_port;
if (act == SMK_RECEIVING)
ad.a.u.net->v6info.saddr = address->sin6_addr;
else
--
2.34.1
From: Randy Dunlap <[email protected]>
commit 05fe3c103f7e6b8b4fca8a7001dfc9ed4628085b upstream.
__setup() handlers should return 1 if the command line option is handled
and 0 if not (or maybe never return 0; it just pollutes init's
environment). This prevents:
Unknown kernel command line parameters \
"BOOT_IMAGE=/boot/bzImage-517rc5 hardened_usercopy=off", will be \
passed to user space.
Run /sbin/init as init process
with arguments:
/sbin/init
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/boot/bzImage-517rc5
hardened_usercopy=off
or
hardened_usercopy=on
but when "hardened_usercopy=foo" is used, there is no Unknown kernel
command line parameter.
Return 1 to indicate that the boot option has been handled.
Print a warning if strtobool() returns an error on the option string,
but do not mark this as in unknown command line option and do not cause
init's environment to be polluted with this string.
Link: https://lkml.kernel.org/r/[email protected]
Link: lore.kernel.org/r/[email protected]
Fixes: b5cb15d9372ab ("usercopy: Allow boot cmdline disabling of hardening")
Signed-off-by: Randy Dunlap <[email protected]>
Reported-by: Igor Zhbanov <[email protected]>
Acked-by: Chris von Recklinghausen <[email protected]>
Cc: Kees Cook <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/usercopy.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/mm/usercopy.c
+++ b/mm/usercopy.c
@@ -294,7 +294,10 @@ static bool enable_checks __initdata = t
static int __init parse_hardened_usercopy(char *str)
{
- return strtobool(str, &enable_checks);
+ if (strtobool(str, &enable_checks))
+ pr_warn("Invalid option string for hardened_usercopy: '%s'\n",
+ str);
+ return 1;
}
__setup("hardened_usercopy=", parse_hardened_usercopy);
From: Kuogee Hsieh <[email protected]>
[ Upstream commit 5e602f5156910c7b19661699896cb6e3fb94fab9 ]
DP CTS test case 4.2.2.6 has valid edid with bad checksum on purpose
and expect DP source return correct checksum. During drm edid read,
correct edid checksum is calculated and stored at
connector::real_edid_checksum.
The problem is struct dp_panel::connector never be assigned, instead the
connector is stored in struct msm_dp::connector. When we run compliance
testing test case 4.2.2.6 dp_panel_handle_sink_request() won't have a valid
edid set in struct dp_panel::edid so we'll try to use the connectors
real_edid_checksum and hit a NULL pointer dereference error because the
connector pointer is never assigned.
Changes in V2:
-- populate panel connector at msm_dp_modeset_init() instead of at dp_panel_read_sink_caps()
Changes in V3:
-- remove unhelpful kernel crash trace commit text
-- remove renaming dp_display parameter to dp
Changes in V4:
-- add more details to commit text
Changes in v10:
-- group into one series
Changes in v11:
-- drop drm/msm/dp: dp_link_parse_sink_count() return immediately if aux read
Fixes: 7948fe12d47 ("drm/msm/dp: return correct edid checksum after corrupted edid checksum read")
Signee-off-by: Kuogee Hsieh <[email protected]>
Reviewed-by: Bjorn Andersson <[email protected]>
Reviewed-by: Stephen Boyd <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Baryshkov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/msm/dp/dp_display.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
index 66f2ea3d42fc..6cd6934c8c9f 100644
--- a/drivers/gpu/drm/msm/dp/dp_display.c
+++ b/drivers/gpu/drm/msm/dp/dp_display.c
@@ -1336,6 +1336,7 @@ int msm_dp_modeset_init(struct msm_dp *dp_display, struct drm_device *dev,
struct drm_encoder *encoder)
{
struct msm_drm_private *priv;
+ struct dp_display_private *dp_priv;
int ret;
if (WARN_ON(!encoder) || WARN_ON(!dp_display) || WARN_ON(!dev))
@@ -1344,6 +1345,8 @@ int msm_dp_modeset_init(struct msm_dp *dp_display, struct drm_device *dev,
priv = dev->dev_private;
dp_display->drm_dev = dev;
+ dp_priv = container_of(dp_display, struct dp_display_private, dp_display);
+
ret = dp_display_request_irq(dp_display);
if (ret) {
DRM_ERROR("request_irq failed, ret=%d\n", ret);
@@ -1361,6 +1364,8 @@ int msm_dp_modeset_init(struct msm_dp *dp_display, struct drm_device *dev,
return ret;
}
+ dp_priv->panel->connector = dp_display->connector;
+
priv->connectors[priv->num_connectors++] = dp_display->connector;
return 0;
}
--
2.34.1
From: Jernej Skrabec <[email protected]>
[ Upstream commit fecd363ae2d5042553370b0adf60c47e35c34a83 ]
According to BSP library source, H264 neighbour info buffer size needs
to be 32 kiB for H6. This is similar to H265 decoding, which also needs
double buffer size in comparison to older Cedrus core generations.
Increase buffer size to cover H6 needs. Since increase is not that big
in absolute numbers, it doesn't make sense to complicate logic for older
generations.
Issue was discovered using iommu and cross checked with BSP library
source.
Fixes: 6eb9b758e307 ("media: cedrus: Add H264 decoding support")
Signed-off-by: Jernej Skrabec <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/staging/media/sunxi/cedrus/cedrus_h264.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/staging/media/sunxi/cedrus/cedrus_h264.c b/drivers/staging/media/sunxi/cedrus/cedrus_h264.c
index de7442d4834d..d3e26bfe6c90 100644
--- a/drivers/staging/media/sunxi/cedrus/cedrus_h264.c
+++ b/drivers/staging/media/sunxi/cedrus/cedrus_h264.c
@@ -38,7 +38,7 @@ struct cedrus_h264_sram_ref_pic {
#define CEDRUS_H264_FRAME_NUM 18
-#define CEDRUS_NEIGHBOR_INFO_BUF_SIZE (16 * SZ_1K)
+#define CEDRUS_NEIGHBOR_INFO_BUF_SIZE (32 * SZ_1K)
#define CEDRUS_MIN_PIC_INFO_BUF_SIZE (130 * SZ_1K)
static void cedrus_h264_write_sram(struct cedrus_dev *dev,
--
2.34.1
From: Jie Hai <[email protected]>
[ Upstream commit b95044b38425f563404234d96bbb20cc6360c7e1 ]
Remove the loaded hisi_dma driver and reload it, the driver fails
to work properly. The following error is reported in the kernel log:
[ 1475.597609] hisi_dma 0000:7b:00.0: Failed to allocate MSI vectors!
[ 1475.604915] hisi_dma: probe of 0000:7b:00.0 failed with error -28
As noted in "The MSI Driver Guide HOWTO"[1], the number of MSI
interrupt must be a power of two. The Kunpeng DMA driver allocates 30
MSI interrupts. As a result, no space left on device is reported
when the driver is reloaded and allocates interrupt vectors from the
interrupt domain.
This patch changes the number of interrupt vectors allocated by
hisi_dma driver to 32 to avoid this problem.
[1] https://www.kernel.org/doc/html/latest/PCI/msi-howto.html
Fixes: e9f08b65250d ("dmaengine: hisilicon: Add Kunpeng DMA engine support")
Signed-off-by: Jie Hai <[email protected]>
Acked-by: Zhou Wang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/dma/hisi_dma.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/dma/hisi_dma.c b/drivers/dma/hisi_dma.c
index e1a958ae7925..3e83769615d1 100644
--- a/drivers/dma/hisi_dma.c
+++ b/drivers/dma/hisi_dma.c
@@ -30,7 +30,7 @@
#define HISI_DMA_MODE 0x217c
#define HISI_DMA_OFFSET 0x100
-#define HISI_DMA_MSI_NUM 30
+#define HISI_DMA_MSI_NUM 32
#define HISI_DMA_CHAN_NUM 30
#define HISI_DMA_Q_DEPTH_VAL 1024
--
2.34.1
From: Quinn Tran <[email protected]>
commit 58ca5999e0367d131de82a75257fbfd5aed0195d upstream.
User experienced no task management error while target device is responding
with error. The RSP_CODE field in the status IOCB is in little endian.
Driver assumes it's big endian and it picked up erroneous data.
Convert the data back to big endian as is on the wire.
Link: https://lore.kernel.org/r/[email protected]
Fixes: faef62d13463 ("[SCSI] qla2xxx: Fix Task Management command asynchronous handling")
Cc: [email protected]
Reviewed-by: Himanshu Madhani <[email protected]>
Signed-off-by: Quinn Tran <[email protected]>
Signed-off-by: Nilesh Javali <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/qla2xxx/qla_isr.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -2248,6 +2248,7 @@ qla24xx_tm_iocb_entry(scsi_qla_host_t *v
iocb->u.tmf.data = QLA_FUNCTION_FAILED;
} else if ((le16_to_cpu(sts->scsi_status) &
SS_RESPONSE_INFO_LEN_VALID)) {
+ host_to_fcp_swap(sts->data, sizeof(sts->data));
if (le32_to_cpu(sts->rsp_data_len) < 4) {
ql_log(ql_log_warn, fcport->vha, 0x503b,
"Async-%s error - hdl=%x not enough response(%d).\n",
From: Hector Martin <[email protected]>
commit 9466987f246758eb7e9071ae58005253f631271e upstream.
The alignment check was wrong (e.g. & 4 instead of & 3), and the logic
was also inefficient if the length was not a multiple of 4, since it
would needlessly fall back to copying the entire buffer bytewise.
We already have a perfectly good memcpy_toio function, so just call that
instead of rolling our own copy logic here. brcmf_pcie_init_ringbuffers
was already using it anyway.
Fixes: 9e37f045d5e7 ("brcmfmac: Adding PCIe bus layer support.")
Reviewed-by: Linus Walleij <[email protected]>
Reviewed-by: Arend van Spriel <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Cc: [email protected]
Signed-off-by: Hector Martin <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c | 48 +---------------
1 file changed, 4 insertions(+), 44 deletions(-)
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
@@ -12,6 +12,7 @@
#include <linux/interrupt.h>
#include <linux/bcma/bcma.h>
#include <linux/sched.h>
+#include <linux/io.h>
#include <asm/unaligned.h>
#include <soc.h>
@@ -447,47 +448,6 @@ brcmf_pcie_write_ram32(struct brcmf_pcie
static void
-brcmf_pcie_copy_mem_todev(struct brcmf_pciedev_info *devinfo, u32 mem_offset,
- void *srcaddr, u32 len)
-{
- void __iomem *address = devinfo->tcm + mem_offset;
- __le32 *src32;
- __le16 *src16;
- u8 *src8;
-
- if (((ulong)address & 4) || ((ulong)srcaddr & 4) || (len & 4)) {
- if (((ulong)address & 2) || ((ulong)srcaddr & 2) || (len & 2)) {
- src8 = (u8 *)srcaddr;
- while (len) {
- iowrite8(*src8, address);
- address++;
- src8++;
- len--;
- }
- } else {
- len = len / 2;
- src16 = (__le16 *)srcaddr;
- while (len) {
- iowrite16(le16_to_cpu(*src16), address);
- address += 2;
- src16++;
- len--;
- }
- }
- } else {
- len = len / 4;
- src32 = (__le32 *)srcaddr;
- while (len) {
- iowrite32(le32_to_cpu(*src32), address);
- address += 4;
- src32++;
- len--;
- }
- }
-}
-
-
-static void
brcmf_pcie_copy_dev_tomem(struct brcmf_pciedev_info *devinfo, u32 mem_offset,
void *dstaddr, u32 len)
{
@@ -1561,8 +1521,8 @@ static int brcmf_pcie_download_fw_nvram(
return err;
brcmf_dbg(PCIE, "Download FW %s\n", devinfo->fw_name);
- brcmf_pcie_copy_mem_todev(devinfo, devinfo->ci->rambase,
- (void *)fw->data, fw->size);
+ memcpy_toio(devinfo->tcm + devinfo->ci->rambase,
+ (void *)fw->data, fw->size);
resetintr = get_unaligned_le32(fw->data);
release_firmware(fw);
@@ -1576,7 +1536,7 @@ static int brcmf_pcie_download_fw_nvram(
brcmf_dbg(PCIE, "Download NVRAM %s\n", devinfo->nvram_name);
address = devinfo->ci->rambase + devinfo->ci->ramsize -
nvram_len;
- brcmf_pcie_copy_mem_todev(devinfo, address, nvram, nvram_len);
+ memcpy_toio(devinfo->tcm + address, nvram, nvram_len);
brcmf_fw_nvram_free(nvram);
} else {
brcmf_dbg(PCIE, "No matching NVRAM file found %s\n",
On 4/5/22 00:24, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.110 release.
> There are 599 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 07 Apr 2022 07:01:33 +0000.
> Anything received after that time might be too late.
>
Building um:defconfig ... failed
Building csky:defconfig ... failed
Building microblaze:mmu_defconfig ... failed
------
Error log:
fs/binfmt_elf.c: In function 'fill_note_info':
fs/binfmt_elf.c:2050:45: error: 'siginfo' undeclared (first use in this function)
2050 | sz = elf_dump_thread_status(siginfo->si_signo, ets);
| ^~~~~~~
fs/binfmt_elf.c:2050:45: note: each undeclared identifier is reported only once for each function it appears in
fs/binfmt_elf.c:2056:53: error: 'regs' undeclared (first use in this function)
2056 | elf_core_copy_regs(&info->prstatus->pr_reg, regs);
| ^~~~
Build just started, so there are likely going to be more failures.
Guenter
From: Eric W. Biederman <[email protected]>
commit 9ec7d3230717b4fe9b6c7afeb4811909c23fa1d7 upstream.
Instead of individually passing cprm->siginfo and cprm->regs
into fill_note_info pass all of struct coredump_params.
This is preparation to allow fill_files_note to use the existing
vma snapshot.
Reviewed-by: Jann Horn <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Signed-off-by: "Eric W. Biederman" <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/binfmt_elf.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
--- a/fs/binfmt_elf.c
+++ b/fs/binfmt_elf.c
@@ -1797,7 +1797,7 @@ static int fill_thread_core_info(struct
static int fill_note_info(struct elfhdr *elf, int phdrs,
struct elf_note_info *info,
- const kernel_siginfo_t *siginfo, struct pt_regs *regs)
+ struct coredump_params *cprm)
{
struct task_struct *dump_task = current;
const struct user_regset_view *view = task_user_regset_view(dump_task);
@@ -1869,7 +1869,7 @@ static int fill_note_info(struct elfhdr
* Now fill in each thread's information.
*/
for (t = info->thread; t != NULL; t = t->next)
- if (!fill_thread_core_info(t, view, siginfo->si_signo, &info->size))
+ if (!fill_thread_core_info(t, view, cprm->siginfo->si_signo, &info->size))
return 0;
/*
@@ -1878,7 +1878,7 @@ static int fill_note_info(struct elfhdr
fill_psinfo(psinfo, dump_task->group_leader, dump_task->mm);
info->size += notesize(&info->psinfo);
- fill_siginfo_note(&info->signote, &info->csigdata, siginfo);
+ fill_siginfo_note(&info->signote, &info->csigdata, cprm->siginfo);
info->size += notesize(&info->signote);
fill_auxv_note(&info->auxv, current->mm);
@@ -2026,7 +2026,7 @@ static int elf_note_info_init(struct elf
static int fill_note_info(struct elfhdr *elf, int phdrs,
struct elf_note_info *info,
- const kernel_siginfo_t *siginfo, struct pt_regs *regs)
+ struct coredump_params *cprm)
{
struct core_thread *ct;
struct elf_thread_status *ets;
@@ -2069,7 +2069,7 @@ static int fill_note_info(struct elfhdr
fill_note(info->notes + 1, "CORE", NT_PRPSINFO,
sizeof(*info->psinfo), info->psinfo);
- fill_siginfo_note(info->notes + 2, &info->csigdata, siginfo);
+ fill_siginfo_note(info->notes + 2, &info->csigdata, cprm->siginfo);
fill_auxv_note(info->notes + 3, current->mm);
info->numnote = 4;
@@ -2079,8 +2079,8 @@ static int fill_note_info(struct elfhdr
}
/* Try to dump the FPU. */
- info->prstatus->pr_fpvalid = elf_core_copy_task_fpregs(current, regs,
- info->fpu);
+ info->prstatus->pr_fpvalid =
+ elf_core_copy_task_fpregs(current, cprm->regs, info->fpu);
if (info->prstatus->pr_fpvalid)
fill_note(info->notes + info->numnote++,
"CORE", NT_PRFPREG, sizeof(*info->fpu), info->fpu);
@@ -2193,7 +2193,7 @@ static int elf_core_dump(struct coredump
* Collect all the non-memory information about the process for the
* notes. This also sets up the file header.
*/
- if (!fill_note_info(&elf, e_phnum, &info, cprm->siginfo, cprm->regs))
+ if (!fill_note_info(&elf, e_phnum, &info, cprm))
goto end_coredump;
has_dumped = 1;
From: Ondrej Zary <[email protected]>
[ Upstream commit ef058cc8b7193d15a771272359c7454839ae74ee ]
Commit 2161536516ed ("media: media/pci: set device_caps in struct video_device")
introduced a regression: V4L2_CAP_TUNER is always present in device_caps,
even when the device has no tuner.
This causes a warning:
WARNING: CPU: 0 PID: 249 at drivers/media/v4l2-core/v4l2-ioctl.c:1102 v4l_querycap+0xa0/0xb0 [videodev]
Fixes: 2161536516ed ("media: media/pci: set device_caps in struct video_device")
Signed-off-by: Ondrej Zary <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/pci/bt8xx/bttv-driver.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/media/pci/bt8xx/bttv-driver.c b/drivers/media/pci/bt8xx/bttv-driver.c
index 35a51e9b539d..1f0e4b913a05 100644
--- a/drivers/media/pci/bt8xx/bttv-driver.c
+++ b/drivers/media/pci/bt8xx/bttv-driver.c
@@ -3898,7 +3898,7 @@ static int bttv_register_video(struct bttv *btv)
/* video */
vdev_init(btv, &btv->video_dev, &bttv_video_template, "video");
- btv->video_dev.device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_TUNER |
+ btv->video_dev.device_caps = V4L2_CAP_VIDEO_CAPTURE |
V4L2_CAP_READWRITE | V4L2_CAP_STREAMING;
if (btv->tuner_type != TUNER_ABSENT)
btv->video_dev.device_caps |= V4L2_CAP_TUNER;
@@ -3919,7 +3919,7 @@ static int bttv_register_video(struct bttv *btv)
/* vbi */
vdev_init(btv, &btv->vbi_dev, &bttv_video_template, "vbi");
btv->vbi_dev.device_caps = V4L2_CAP_VBI_CAPTURE | V4L2_CAP_READWRITE |
- V4L2_CAP_STREAMING | V4L2_CAP_TUNER;
+ V4L2_CAP_STREAMING;
if (btv->tuner_type != TUNER_ABSENT)
btv->vbi_dev.device_caps |= V4L2_CAP_TUNER;
--
2.34.1
From: Roman Li <[email protected]>
[ Upstream commit 128f8ed5902a287a6bb4afe0ffdae8a80b2a64ec ]
[Why]
When display topology changed on DSC hub we add all crtcs with dsc support to
atomic state.
Refer to patch:"drm/amd/display: Trigger modesets on MST DSC connectors"
However the original implementation may skip crtc if the topology change
caused by unplug.
That potentially could lead to no-lightup or corruption on DSC hub after
unplug event on one of the connectors.
[How]
Update add_affected_mst_dsc_crtcs() to use old connector state
if new connector state has no crtc (undergoes modeset due to unplug)
Fixes: 44be939ff7ac58 ("drm/amd/display: Trigger modesets on MST DSC connectors")
Reviewed-by: Hersen Wu <[email protected]>
Acked-by: Jasdeep Dhillon <[email protected]>
Signed-off-by: Roman Li <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index b65364695219..e828f9414ba2 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -8615,10 +8615,13 @@ static int dm_update_plane_state(struct dc *dc,
static int add_affected_mst_dsc_crtcs(struct drm_atomic_state *state, struct drm_crtc *crtc)
{
struct drm_connector *connector;
- struct drm_connector_state *conn_state;
+ struct drm_connector_state *conn_state, *old_conn_state;
struct amdgpu_dm_connector *aconnector = NULL;
int i;
- for_each_new_connector_in_state(state, connector, conn_state, i) {
+ for_each_oldnew_connector_in_state(state, connector, old_conn_state, conn_state, i) {
+ if (!conn_state->crtc)
+ conn_state = old_conn_state;
+
if (conn_state->crtc != crtc)
continue;
--
2.34.1
From: Alan Stern <[email protected]>
commit 1892bf90677abcad7f06e897e308f5c3e3618dd4 upstream.
The kernel test robot found a problem with the ene_ub6250 subdriver in
usb-storage: It uses structures containing bitfields to represent
hardware bits in its SD_STATUS, MS_STATUS, and SM_STATUS bytes. This
is not safe; it presumes a particular bit ordering and it assumes the
compiler will not insert padding, neither of which is guaranteed.
This patch fixes the problem by changing the structures to simple u8
values, with the bitfields replaced by bitmask constants.
CC: <[email protected]>
Signed-off-by: Alan Stern <[email protected]>
Link: https://lore.kernel.org/r/YjOcbuU106UpJ/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/storage/ene_ub6250.c | 153 +++++++++++++++++++--------------------
1 file changed, 75 insertions(+), 78 deletions(-)
--- a/drivers/usb/storage/ene_ub6250.c
+++ b/drivers/usb/storage/ene_ub6250.c
@@ -237,36 +237,33 @@ static struct us_unusual_dev ene_ub6250_
#define memstick_logaddr(logadr1, logadr0) ((((u16)(logadr1)) << 8) | (logadr0))
-struct SD_STATUS {
- u8 Insert:1;
- u8 Ready:1;
- u8 MediaChange:1;
- u8 IsMMC:1;
- u8 HiCapacity:1;
- u8 HiSpeed:1;
- u8 WtP:1;
- u8 Reserved:1;
-};
-
-struct MS_STATUS {
- u8 Insert:1;
- u8 Ready:1;
- u8 MediaChange:1;
- u8 IsMSPro:1;
- u8 IsMSPHG:1;
- u8 Reserved1:1;
- u8 WtP:1;
- u8 Reserved2:1;
-};
-
-struct SM_STATUS {
- u8 Insert:1;
- u8 Ready:1;
- u8 MediaChange:1;
- u8 Reserved:3;
- u8 WtP:1;
- u8 IsMS:1;
-};
+/* SD_STATUS bits */
+#define SD_Insert BIT(0)
+#define SD_Ready BIT(1)
+#define SD_MediaChange BIT(2)
+#define SD_IsMMC BIT(3)
+#define SD_HiCapacity BIT(4)
+#define SD_HiSpeed BIT(5)
+#define SD_WtP BIT(6)
+ /* Bit 7 reserved */
+
+/* MS_STATUS bits */
+#define MS_Insert BIT(0)
+#define MS_Ready BIT(1)
+#define MS_MediaChange BIT(2)
+#define MS_IsMSPro BIT(3)
+#define MS_IsMSPHG BIT(4)
+ /* Bit 5 reserved */
+#define MS_WtP BIT(6)
+ /* Bit 7 reserved */
+
+/* SM_STATUS bits */
+#define SM_Insert BIT(0)
+#define SM_Ready BIT(1)
+#define SM_MediaChange BIT(2)
+ /* Bits 3-5 reserved */
+#define SM_WtP BIT(6)
+#define SM_IsMS BIT(7)
struct ms_bootblock_cis {
u8 bCistplDEVICE[6]; /* 0 */
@@ -437,9 +434,9 @@ struct ene_ub6250_info {
u8 *bbuf;
/* for 6250 code */
- struct SD_STATUS SD_Status;
- struct MS_STATUS MS_Status;
- struct SM_STATUS SM_Status;
+ u8 SD_Status;
+ u8 MS_Status;
+ u8 SM_Status;
/* ----- SD Control Data ---------------- */
/*SD_REGISTER SD_Regs; */
@@ -602,7 +599,7 @@ static int sd_scsi_test_unit_ready(struc
{
struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
- if (info->SD_Status.Insert && info->SD_Status.Ready)
+ if ((info->SD_Status & SD_Insert) && (info->SD_Status & SD_Ready))
return USB_STOR_TRANSPORT_GOOD;
else {
ene_sd_init(us);
@@ -622,7 +619,7 @@ static int sd_scsi_mode_sense(struct us_
0x0b, 0x00, 0x80, 0x08, 0x00, 0x00,
0x71, 0xc0, 0x00, 0x00, 0x02, 0x00 };
- if (info->SD_Status.WtP)
+ if (info->SD_Status & SD_WtP)
usb_stor_set_xfer_buf(mediaWP, 12, srb);
else
usb_stor_set_xfer_buf(mediaNoWP, 12, srb);
@@ -641,9 +638,9 @@ static int sd_scsi_read_capacity(struct
struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
usb_stor_dbg(us, "sd_scsi_read_capacity\n");
- if (info->SD_Status.HiCapacity) {
+ if (info->SD_Status & SD_HiCapacity) {
bl_len = 0x200;
- if (info->SD_Status.IsMMC)
+ if (info->SD_Status & SD_IsMMC)
bl_num = info->HC_C_SIZE-1;
else
bl_num = (info->HC_C_SIZE + 1) * 1024 - 1;
@@ -693,7 +690,7 @@ static int sd_scsi_read(struct us_data *
return USB_STOR_TRANSPORT_ERROR;
}
- if (info->SD_Status.HiCapacity)
+ if (info->SD_Status & SD_HiCapacity)
bnByte = bn;
/* set up the command wrapper */
@@ -733,7 +730,7 @@ static int sd_scsi_write(struct us_data
return USB_STOR_TRANSPORT_ERROR;
}
- if (info->SD_Status.HiCapacity)
+ if (info->SD_Status & SD_HiCapacity)
bnByte = bn;
/* set up the command wrapper */
@@ -1455,7 +1452,7 @@ static int ms_scsi_test_unit_ready(struc
struct ene_ub6250_info *info = (struct ene_ub6250_info *)(us->extra);
/* pr_info("MS_SCSI_Test_Unit_Ready\n"); */
- if (info->MS_Status.Insert && info->MS_Status.Ready) {
+ if ((info->MS_Status & MS_Insert) && (info->MS_Status & MS_Ready)) {
return USB_STOR_TRANSPORT_GOOD;
} else {
ene_ms_init(us);
@@ -1475,7 +1472,7 @@ static int ms_scsi_mode_sense(struct us_
0x0b, 0x00, 0x80, 0x08, 0x00, 0x00,
0x71, 0xc0, 0x00, 0x00, 0x02, 0x00 };
- if (info->MS_Status.WtP)
+ if (info->MS_Status & MS_WtP)
usb_stor_set_xfer_buf(mediaWP, 12, srb);
else
usb_stor_set_xfer_buf(mediaNoWP, 12, srb);
@@ -1494,7 +1491,7 @@ static int ms_scsi_read_capacity(struct
usb_stor_dbg(us, "ms_scsi_read_capacity\n");
bl_len = 0x200;
- if (info->MS_Status.IsMSPro)
+ if (info->MS_Status & MS_IsMSPro)
bl_num = info->MSP_TotalBlock - 1;
else
bl_num = info->MS_Lib.NumberOfLogBlock * info->MS_Lib.blockSize * 2 - 1;
@@ -1649,7 +1646,7 @@ static int ms_scsi_read(struct us_data *
if (bn > info->bl_num)
return USB_STOR_TRANSPORT_ERROR;
- if (info->MS_Status.IsMSPro) {
+ if (info->MS_Status & MS_IsMSPro) {
result = ene_load_bincode(us, MSP_RW_PATTERN);
if (result != USB_STOR_XFER_GOOD) {
usb_stor_dbg(us, "Load MPS RW pattern Fail !!\n");
@@ -1750,7 +1747,7 @@ static int ms_scsi_write(struct us_data
if (bn > info->bl_num)
return USB_STOR_TRANSPORT_ERROR;
- if (info->MS_Status.IsMSPro) {
+ if (info->MS_Status & MS_IsMSPro) {
result = ene_load_bincode(us, MSP_RW_PATTERN);
if (result != USB_STOR_XFER_GOOD) {
pr_info("Load MSP RW pattern Fail !!\n");
@@ -1858,12 +1855,12 @@ static int ene_get_card_status(struct us
tmpreg = (u16) reg4b;
reg4b = *(u32 *)(&buf[0x14]);
- if (info->SD_Status.HiCapacity && !info->SD_Status.IsMMC)
+ if ((info->SD_Status & SD_HiCapacity) && !(info->SD_Status & SD_IsMMC))
info->HC_C_SIZE = (reg4b >> 8) & 0x3fffff;
info->SD_C_SIZE = ((tmpreg & 0x03) << 10) | (u16)(reg4b >> 22);
info->SD_C_SIZE_MULT = (u8)(reg4b >> 7) & 0x07;
- if (info->SD_Status.HiCapacity && info->SD_Status.IsMMC)
+ if ((info->SD_Status & SD_HiCapacity) && (info->SD_Status & SD_IsMMC))
info->HC_C_SIZE = *(u32 *)(&buf[0x100]);
if (info->SD_READ_BL_LEN > SD_BLOCK_LEN) {
@@ -2075,6 +2072,7 @@ static int ene_ms_init(struct us_data *u
u16 MSP_BlockSize, MSP_UserAreaBlocks;
struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
u8 *bbuf = info->bbuf;
+ unsigned int s;
printk(KERN_INFO "transport --- ENE_MSInit\n");
@@ -2099,15 +2097,16 @@ static int ene_ms_init(struct us_data *u
return USB_STOR_TRANSPORT_ERROR;
}
/* the same part to test ENE */
- info->MS_Status = *(struct MS_STATUS *) bbuf;
+ info->MS_Status = bbuf[0];
- if (info->MS_Status.Insert && info->MS_Status.Ready) {
- printk(KERN_INFO "Insert = %x\n", info->MS_Status.Insert);
- printk(KERN_INFO "Ready = %x\n", info->MS_Status.Ready);
- printk(KERN_INFO "IsMSPro = %x\n", info->MS_Status.IsMSPro);
- printk(KERN_INFO "IsMSPHG = %x\n", info->MS_Status.IsMSPHG);
- printk(KERN_INFO "WtP= %x\n", info->MS_Status.WtP);
- if (info->MS_Status.IsMSPro) {
+ s = info->MS_Status;
+ if ((s & MS_Insert) && (s & MS_Ready)) {
+ printk(KERN_INFO "Insert = %x\n", !!(s & MS_Insert));
+ printk(KERN_INFO "Ready = %x\n", !!(s & MS_Ready));
+ printk(KERN_INFO "IsMSPro = %x\n", !!(s & MS_IsMSPro));
+ printk(KERN_INFO "IsMSPHG = %x\n", !!(s & MS_IsMSPHG));
+ printk(KERN_INFO "WtP= %x\n", !!(s & MS_WtP));
+ if (s & MS_IsMSPro) {
MSP_BlockSize = (bbuf[6] << 8) | bbuf[7];
MSP_UserAreaBlocks = (bbuf[10] << 8) | bbuf[11];
info->MSP_TotalBlock = MSP_BlockSize * MSP_UserAreaBlocks;
@@ -2168,17 +2167,17 @@ static int ene_sd_init(struct us_data *u
return USB_STOR_TRANSPORT_ERROR;
}
- info->SD_Status = *(struct SD_STATUS *) bbuf;
- if (info->SD_Status.Insert && info->SD_Status.Ready) {
- struct SD_STATUS *s = &info->SD_Status;
+ info->SD_Status = bbuf[0];
+ if ((info->SD_Status & SD_Insert) && (info->SD_Status & SD_Ready)) {
+ unsigned int s = info->SD_Status;
ene_get_card_status(us, bbuf);
- usb_stor_dbg(us, "Insert = %x\n", s->Insert);
- usb_stor_dbg(us, "Ready = %x\n", s->Ready);
- usb_stor_dbg(us, "IsMMC = %x\n", s->IsMMC);
- usb_stor_dbg(us, "HiCapacity = %x\n", s->HiCapacity);
- usb_stor_dbg(us, "HiSpeed = %x\n", s->HiSpeed);
- usb_stor_dbg(us, "WtP = %x\n", s->WtP);
+ usb_stor_dbg(us, "Insert = %x\n", !!(s & SD_Insert));
+ usb_stor_dbg(us, "Ready = %x\n", !!(s & SD_Ready));
+ usb_stor_dbg(us, "IsMMC = %x\n", !!(s & SD_IsMMC));
+ usb_stor_dbg(us, "HiCapacity = %x\n", !!(s & SD_HiCapacity));
+ usb_stor_dbg(us, "HiSpeed = %x\n", !!(s & SD_HiSpeed));
+ usb_stor_dbg(us, "WtP = %x\n", !!(s & SD_WtP));
} else {
usb_stor_dbg(us, "SD Card Not Ready --- %x\n", bbuf[0]);
return USB_STOR_TRANSPORT_ERROR;
@@ -2200,14 +2199,14 @@ static int ene_init(struct us_data *us)
misc_reg03 = bbuf[0];
if (misc_reg03 & 0x01) {
- if (!info->SD_Status.Ready) {
+ if (!(info->SD_Status & SD_Ready)) {
result = ene_sd_init(us);
if (result != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
}
}
if (misc_reg03 & 0x02) {
- if (!info->MS_Status.Ready) {
+ if (!(info->MS_Status & MS_Ready)) {
result = ene_ms_init(us);
if (result != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
@@ -2306,14 +2305,14 @@ static int ene_transport(struct scsi_cmn
/*US_DEBUG(usb_stor_show_command(us, srb)); */
scsi_set_resid(srb, 0);
- if (unlikely(!(info->SD_Status.Ready || info->MS_Status.Ready)))
+ if (unlikely(!(info->SD_Status & SD_Ready) || (info->MS_Status & MS_Ready)))
result = ene_init(us);
if (result == USB_STOR_XFER_GOOD) {
result = USB_STOR_TRANSPORT_ERROR;
- if (info->SD_Status.Ready)
+ if (info->SD_Status & SD_Ready)
result = sd_scsi_irp(us, srb);
- if (info->MS_Status.Ready)
+ if (info->MS_Status & MS_Ready)
result = ms_scsi_irp(us, srb);
}
return result;
@@ -2377,7 +2376,6 @@ static int ene_ub6250_probe(struct usb_i
static int ene_ub6250_resume(struct usb_interface *iface)
{
- u8 tmp = 0;
struct us_data *us = usb_get_intfdata(iface);
struct ene_ub6250_info *info = (struct ene_ub6250_info *)(us->extra);
@@ -2389,17 +2387,16 @@ static int ene_ub6250_resume(struct usb_
mutex_unlock(&us->dev_mutex);
info->Power_IsResum = true;
- /*info->SD_Status.Ready = 0; */
- info->SD_Status = *(struct SD_STATUS *)&tmp;
- info->MS_Status = *(struct MS_STATUS *)&tmp;
- info->SM_Status = *(struct SM_STATUS *)&tmp;
+ /* info->SD_Status &= ~SD_Ready; */
+ info->SD_Status = 0;
+ info->MS_Status = 0;
+ info->SM_Status = 0;
return 0;
}
static int ene_ub6250_reset_resume(struct usb_interface *iface)
{
- u8 tmp = 0;
struct us_data *us = usb_get_intfdata(iface);
struct ene_ub6250_info *info = (struct ene_ub6250_info *)(us->extra);
@@ -2411,10 +2408,10 @@ static int ene_ub6250_reset_resume(struc
* the device
*/
info->Power_IsResum = true;
- /*info->SD_Status.Ready = 0; */
- info->SD_Status = *(struct SD_STATUS *)&tmp;
- info->MS_Status = *(struct MS_STATUS *)&tmp;
- info->SM_Status = *(struct SM_STATUS *)&tmp;
+ /* info->SD_Status &= ~SD_Ready; */
+ info->SD_Status = 0;
+ info->MS_Status = 0;
+ info->SM_Status = 0;
return 0;
}
From: Ilpo Järvinen <[email protected]>
[ Upstream commit f58c252e30cf74f68b0054293adc03b5923b9f0e ]
When 8250 UART is using DMA, x_char (XON/XOFF) is never sent
to the wire. After this change, x_char is injected correctly.
Create uart_xchar_out() helper for sending the x_char out and
accounting related to it. It seems that almost every driver
does these same steps with x_char. Except for 8250, however,
almost all currently lack .serial_out so they cannot immediately
take advantage of this new helper.
The downside of this patch is that it might reintroduce
the problems some devices faced with mixed DMA/non-DMA transfer
which caused revert f967fc8f165f (Revert "serial: 8250_dma:
don't bother DMA with small transfers"). However, the impact
should be limited to cases with XON/XOFF (that didn't work
with DMA capable devices to begin with so this problem is not
very likely to cause a major issue, if any at all).
Fixes: 9ee4b83e51f74 ("serial: 8250: Add support for dmaengine")
Reported-by: Gilles Buloz <[email protected]>
Tested-by: Gilles Buloz <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Signed-off-by: Ilpo Järvinen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/tty/serial/8250/8250_dma.c | 11 ++++++++++-
drivers/tty/serial/8250/8250_port.c | 4 +---
drivers/tty/serial/serial_core.c | 14 ++++++++++++++
include/linux/serial_core.h | 2 ++
4 files changed, 27 insertions(+), 4 deletions(-)
diff --git a/drivers/tty/serial/8250/8250_dma.c b/drivers/tty/serial/8250/8250_dma.c
index 890fa7ddaa7f..b3c3f7e5851a 100644
--- a/drivers/tty/serial/8250/8250_dma.c
+++ b/drivers/tty/serial/8250/8250_dma.c
@@ -64,10 +64,19 @@ int serial8250_tx_dma(struct uart_8250_port *p)
struct uart_8250_dma *dma = p->dma;
struct circ_buf *xmit = &p->port.state->xmit;
struct dma_async_tx_descriptor *desc;
+ struct uart_port *up = &p->port;
int ret;
- if (dma->tx_running)
+ if (dma->tx_running) {
+ if (up->x_char) {
+ dmaengine_pause(dma->txchan);
+ uart_xchar_out(up, UART_TX);
+ dmaengine_resume(dma->txchan);
+ }
return 0;
+ } else if (up->x_char) {
+ uart_xchar_out(up, UART_TX);
+ }
if (uart_tx_stopped(&p->port) || uart_circ_empty(xmit)) {
/* We have been called from __dma_tx_complete() */
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 1733f03a7da7..3055353514e1 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -1817,9 +1817,7 @@ void serial8250_tx_chars(struct uart_8250_port *up)
int count;
if (port->x_char) {
- serial_out(up, UART_TX, port->x_char);
- port->icount.tx++;
- port->x_char = 0;
+ uart_xchar_out(port, UART_TX);
return;
}
if (uart_tx_stopped(port)) {
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index be0d9922e320..19f0c5db11e3 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -676,6 +676,20 @@ static void uart_flush_buffer(struct tty_struct *tty)
tty_port_tty_wakeup(&state->port);
}
+/*
+ * This function performs low-level write of high-priority XON/XOFF
+ * character and accounting for it.
+ *
+ * Requires uart_port to implement .serial_out().
+ */
+void uart_xchar_out(struct uart_port *uport, int offset)
+{
+ serial_port_out(uport, offset, uport->x_char);
+ uport->icount.tx++;
+ uport->x_char = 0;
+}
+EXPORT_SYMBOL_GPL(uart_xchar_out);
+
/*
* This function is used to send a high-priority XON/XOFF character to
* the device
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index ff63c2963359..35b26743dbb2 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -463,6 +463,8 @@ extern void uart_handle_cts_change(struct uart_port *uport,
extern void uart_insert_char(struct uart_port *port, unsigned int status,
unsigned int overrun, unsigned int ch, unsigned int flag);
+void uart_xchar_out(struct uart_port *uport, int offset);
+
#ifdef CONFIG_MAGIC_SYSRQ_SERIAL
#define SYSRQ_TIMEOUT (HZ * 5)
--
2.34.1
From: Liam Beguin <[email protected]>
commit ca85123354e1a65a22170286387b4791997fe864 upstream.
iio_convert_raw_to_processed_unlocked() assumes the offset is an
integer. Make a best effort to get a valid offset value for fractional
cases without breaking implicit truncations.
Fixes: 48e44ce0f881 ("iio:inkern: Add function to read the processed value")
Signed-off-by: Liam Beguin <[email protected]>
Reviewed-by: Peter Rosin <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/iio/inkern.c | 32 +++++++++++++++++++++++++++-----
1 file changed, 27 insertions(+), 5 deletions(-)
--- a/drivers/iio/inkern.c
+++ b/drivers/iio/inkern.c
@@ -561,13 +561,35 @@ EXPORT_SYMBOL_GPL(iio_read_channel_avera
static int iio_convert_raw_to_processed_unlocked(struct iio_channel *chan,
int raw, int *processed, unsigned int scale)
{
- int scale_type, scale_val, scale_val2, offset;
+ int scale_type, scale_val, scale_val2;
+ int offset_type, offset_val, offset_val2;
s64 raw64 = raw;
- int ret;
- ret = iio_channel_read(chan, &offset, NULL, IIO_CHAN_INFO_OFFSET);
- if (ret >= 0)
- raw64 += offset;
+ offset_type = iio_channel_read(chan, &offset_val, &offset_val2,
+ IIO_CHAN_INFO_OFFSET);
+ if (offset_type >= 0) {
+ switch (offset_type) {
+ case IIO_VAL_INT:
+ break;
+ case IIO_VAL_INT_PLUS_MICRO:
+ case IIO_VAL_INT_PLUS_NANO:
+ /*
+ * Both IIO_VAL_INT_PLUS_MICRO and IIO_VAL_INT_PLUS_NANO
+ * implicitely truncate the offset to it's integer form.
+ */
+ break;
+ case IIO_VAL_FRACTIONAL:
+ offset_val /= offset_val2;
+ break;
+ case IIO_VAL_FRACTIONAL_LOG2:
+ offset_val >>= offset_val2;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ raw64 += offset_val;
+ }
scale_type = iio_channel_read(chan, &scale_val, &scale_val2,
IIO_CHAN_INFO_SCALE);
From: Eric Biggers <[email protected]>
commit d3481accd974541e6a5d6a1fb588924a3519c36e upstream.
RSA PKCS#1 v1.5 signatures are required to be the same length as the RSA
key size. RFC8017 specifically requires the verifier to check this
(https://datatracker.ietf.org/doc/html/rfc8017#section-8.2.2).
Commit a49de377e051 ("crypto: Add hash param to pkcs1pad") changed the
kernel to allow longer signatures, but didn't explain this part of the
change; it seems to be unrelated to the rest of the commit.
Revert this change, since it doesn't appear to be correct.
We can be pretty sure that no one is relying on overly-long signatures
(which would have to be front-padded with zeroes) being supported, given
that they would have been broken since commit c7381b012872
("crypto: akcipher - new verify API for public key algorithms").
Fixes: a49de377e051 ("crypto: Add hash param to pkcs1pad")
Cc: <[email protected]> # v4.6+
Cc: Tadeusz Struk <[email protected]>
Suggested-by: Vitaly Chikunov <[email protected]>
Signed-off-by: Eric Biggers <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
crypto/rsa-pkcs1pad.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/crypto/rsa-pkcs1pad.c
+++ b/crypto/rsa-pkcs1pad.c
@@ -538,7 +538,7 @@ static int pkcs1pad_verify(struct akciph
if (WARN_ON(req->dst) ||
WARN_ON(!req->dst_len) ||
- !ctx->key_size || req->src_len < ctx->key_size)
+ !ctx->key_size || req->src_len != ctx->key_size)
return -EINVAL;
req_ctx->out_buf = kmalloc(ctx->key_size + req->dst_len, GFP_KERNEL);
From: Jiasheng Jiang <[email protected]>
[ Upstream commit b0b14b5ba11bec56fad344a4a0b2e16449cc8b94 ]
As the potential failure of the wm8350_register_irq(),
it should be better to check it and return error if fails.
Also, use 'free_' in order to avoid same code.
Fixes: 14431aa0c5a4 ("power_supply: Add support for WM8350 PMU")
Signed-off-by: Jiasheng Jiang <[email protected]>
Acked-by: Charles Keepax <[email protected]>
Signed-off-by: Sebastian Reichel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/power/supply/wm8350_power.c | 96 ++++++++++++++++++++++++-----
1 file changed, 82 insertions(+), 14 deletions(-)
diff --git a/drivers/power/supply/wm8350_power.c b/drivers/power/supply/wm8350_power.c
index e05cee457471..9c46c48dccb1 100644
--- a/drivers/power/supply/wm8350_power.c
+++ b/drivers/power/supply/wm8350_power.c
@@ -408,44 +408,112 @@ static const struct power_supply_desc wm8350_usb_desc = {
* Initialisation
*********************************************************************/
-static void wm8350_init_charger(struct wm8350 *wm8350)
+static int wm8350_init_charger(struct wm8350 *wm8350)
{
+ int ret;
+
/* register our interest in charger events */
- wm8350_register_irq(wm8350, WM8350_IRQ_CHG_BAT_HOT,
+ ret = wm8350_register_irq(wm8350, WM8350_IRQ_CHG_BAT_HOT,
wm8350_charger_handler, 0, "Battery hot", wm8350);
- wm8350_register_irq(wm8350, WM8350_IRQ_CHG_BAT_COLD,
+ if (ret)
+ goto err;
+
+ ret = wm8350_register_irq(wm8350, WM8350_IRQ_CHG_BAT_COLD,
wm8350_charger_handler, 0, "Battery cold", wm8350);
- wm8350_register_irq(wm8350, WM8350_IRQ_CHG_BAT_FAIL,
+ if (ret)
+ goto free_chg_bat_hot;
+
+ ret = wm8350_register_irq(wm8350, WM8350_IRQ_CHG_BAT_FAIL,
wm8350_charger_handler, 0, "Battery fail", wm8350);
- wm8350_register_irq(wm8350, WM8350_IRQ_CHG_TO,
+ if (ret)
+ goto free_chg_bat_cold;
+
+ ret = wm8350_register_irq(wm8350, WM8350_IRQ_CHG_TO,
wm8350_charger_handler, 0,
"Charger timeout", wm8350);
- wm8350_register_irq(wm8350, WM8350_IRQ_CHG_END,
+ if (ret)
+ goto free_chg_bat_fail;
+
+ ret = wm8350_register_irq(wm8350, WM8350_IRQ_CHG_END,
wm8350_charger_handler, 0,
"Charge end", wm8350);
- wm8350_register_irq(wm8350, WM8350_IRQ_CHG_START,
+ if (ret)
+ goto free_chg_to;
+
+ ret = wm8350_register_irq(wm8350, WM8350_IRQ_CHG_START,
wm8350_charger_handler, 0,
"Charge start", wm8350);
- wm8350_register_irq(wm8350, WM8350_IRQ_CHG_FAST_RDY,
+ if (ret)
+ goto free_chg_end;
+
+ ret = wm8350_register_irq(wm8350, WM8350_IRQ_CHG_FAST_RDY,
wm8350_charger_handler, 0,
"Fast charge ready", wm8350);
- wm8350_register_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P9,
+ if (ret)
+ goto free_chg_start;
+
+ ret = wm8350_register_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P9,
wm8350_charger_handler, 0,
"Battery <3.9V", wm8350);
- wm8350_register_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P1,
+ if (ret)
+ goto free_chg_fast_rdy;
+
+ ret = wm8350_register_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P1,
wm8350_charger_handler, 0,
"Battery <3.1V", wm8350);
- wm8350_register_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_2P85,
+ if (ret)
+ goto free_chg_vbatt_lt_3p9;
+
+ ret = wm8350_register_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_2P85,
wm8350_charger_handler, 0,
"Battery <2.85V", wm8350);
+ if (ret)
+ goto free_chg_vbatt_lt_3p1;
/* and supply change events */
- wm8350_register_irq(wm8350, WM8350_IRQ_EXT_USB_FB,
+ ret = wm8350_register_irq(wm8350, WM8350_IRQ_EXT_USB_FB,
wm8350_charger_handler, 0, "USB", wm8350);
- wm8350_register_irq(wm8350, WM8350_IRQ_EXT_WALL_FB,
+ if (ret)
+ goto free_chg_vbatt_lt_2p85;
+
+ ret = wm8350_register_irq(wm8350, WM8350_IRQ_EXT_WALL_FB,
wm8350_charger_handler, 0, "Wall", wm8350);
- wm8350_register_irq(wm8350, WM8350_IRQ_EXT_BAT_FB,
+ if (ret)
+ goto free_ext_usb_fb;
+
+ ret = wm8350_register_irq(wm8350, WM8350_IRQ_EXT_BAT_FB,
wm8350_charger_handler, 0, "Battery", wm8350);
+ if (ret)
+ goto free_ext_wall_fb;
+
+ return 0;
+
+free_ext_wall_fb:
+ wm8350_free_irq(wm8350, WM8350_IRQ_EXT_WALL_FB, wm8350);
+free_ext_usb_fb:
+ wm8350_free_irq(wm8350, WM8350_IRQ_EXT_USB_FB, wm8350);
+free_chg_vbatt_lt_2p85:
+ wm8350_free_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_2P85, wm8350);
+free_chg_vbatt_lt_3p1:
+ wm8350_free_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P1, wm8350);
+free_chg_vbatt_lt_3p9:
+ wm8350_free_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P9, wm8350);
+free_chg_fast_rdy:
+ wm8350_free_irq(wm8350, WM8350_IRQ_CHG_FAST_RDY, wm8350);
+free_chg_start:
+ wm8350_free_irq(wm8350, WM8350_IRQ_CHG_START, wm8350);
+free_chg_end:
+ wm8350_free_irq(wm8350, WM8350_IRQ_CHG_END, wm8350);
+free_chg_to:
+ wm8350_free_irq(wm8350, WM8350_IRQ_CHG_TO, wm8350);
+free_chg_bat_fail:
+ wm8350_free_irq(wm8350, WM8350_IRQ_CHG_BAT_FAIL, wm8350);
+free_chg_bat_cold:
+ wm8350_free_irq(wm8350, WM8350_IRQ_CHG_BAT_COLD, wm8350);
+free_chg_bat_hot:
+ wm8350_free_irq(wm8350, WM8350_IRQ_CHG_BAT_HOT, wm8350);
+err:
+ return ret;
}
static void free_charger_irq(struct wm8350 *wm8350)
--
2.34.1
From: Prashant Malani <[email protected]>
commit ffebd90532728086007038986900426544e3df4e upstream.
The Type C ACPI device on older Chromebooks is not generated correctly
(since their EC firmware doesn't support the new commands required). In
such cases, the crafted ACPI device doesn't have an EC parent, and it is
therefore not useful (it shouldn't be generated in the first place since
the EC firmware doesn't support any of the Type C commands).
To handle devices which use these older firmware revisions, check for
the parent EC device handle, and fail the probe if it's not found.
Fixes: fdc6b21e2444 ("platform/chrome: Add Type C connector class driver")
Reported-by: Alyssa Ross <[email protected]>
Reviewed-by: Tzung-Bi Shih <[email protected]>
Signed-off-by: Prashant Malani <[email protected]>
Acked-by: Heikki Krogerus <[email protected]>
Reviewed-by: Alyssa Ross <[email protected]>
Tested-by: Alyssa Ross <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Benson Leung <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/platform/chrome/cros_ec_typec.c | 6 ++++++
1 file changed, 6 insertions(+)
--- a/drivers/platform/chrome/cros_ec_typec.c
+++ b/drivers/platform/chrome/cros_ec_typec.c
@@ -712,7 +712,13 @@ static int cros_typec_probe(struct platf
return -ENOMEM;
typec->dev = dev;
+
typec->ec = dev_get_drvdata(pdev->dev.parent);
+ if (!typec->ec) {
+ dev_err(dev, "couldn't find parent EC device\n");
+ return -ENODEV;
+ }
+
platform_set_drvdata(pdev, typec);
ret = cros_typec_get_cmd_version(typec);
From: Si-Wei Liu <[email protected]>
[ Upstream commit 30c22f3816ffef8aa21a000e93c4ee1402a6ea65 ]
Per VIRTIO v1.1 specification, section 5.1.3.1 Feature bit requirements:
"VIRTIO_NET_F_MQ Requires VIRTIO_NET_F_CTRL_VQ".
There's assumption in the mlx5_vdpa multiqueue code that MQ must come
together with CTRL_VQ. However, there's nowhere in the upper layer to
guarantee this assumption would hold. Were there an untrusted driver
sending down MQ without CTRL_VQ, it would compromise various spots for
e.g. is_index_valid() and is_ctrl_vq_idx(). Although this doesn't end
up with immediate panic or security loophole as of today's code, the
chance for this to be taken advantage of due to future code change is
not zero.
Harden the crispy assumption by failing the set_driver_features() call
when seeing (MQ && !CTRL_VQ). For that end, verify_min_features() is
renamed to verify_driver_features() to reflect the fact that it now does
more than just validate the minimum features. verify_driver_features()
is now used to accommodate various checks against the driver features
for set_driver_features().
Signed-off-by: Si-Wei Liu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Michael S. Tsirkin <[email protected]>
Reviewed-by: Eli Cohen <[email protected]>
Acked-by: Jason Wang <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/vdpa/mlx5/net/mlx5_vnet.c | 18 ++++++++++++++++--
1 file changed, 16 insertions(+), 2 deletions(-)
diff --git a/drivers/vdpa/mlx5/net/mlx5_vnet.c b/drivers/vdpa/mlx5/net/mlx5_vnet.c
index 65d6f8fd81e7..577ff786f11b 100644
--- a/drivers/vdpa/mlx5/net/mlx5_vnet.c
+++ b/drivers/vdpa/mlx5/net/mlx5_vnet.c
@@ -1482,11 +1482,25 @@ static u64 mlx5_vdpa_get_features(struct vdpa_device *vdev)
return ndev->mvdev.mlx_features;
}
-static int verify_min_features(struct mlx5_vdpa_dev *mvdev, u64 features)
+static int verify_driver_features(struct mlx5_vdpa_dev *mvdev, u64 features)
{
+ /* Minimum features to expect */
if (!(features & BIT_ULL(VIRTIO_F_ACCESS_PLATFORM)))
return -EOPNOTSUPP;
+ /* Double check features combination sent down by the driver.
+ * Fail invalid features due to absence of the depended feature.
+ *
+ * Per VIRTIO v1.1 specification, section 5.1.3.1 Feature bit
+ * requirements: "VIRTIO_NET_F_MQ Requires VIRTIO_NET_F_CTRL_VQ".
+ * By failing the invalid features sent down by untrusted drivers,
+ * we're assured the assumption made upon is_index_valid() and
+ * is_ctrl_vq_idx() will not be compromised.
+ */
+ if ((features & (BIT_ULL(VIRTIO_NET_F_MQ) | BIT_ULL(VIRTIO_NET_F_CTRL_VQ))) ==
+ BIT_ULL(VIRTIO_NET_F_MQ))
+ return -EINVAL;
+
return 0;
}
@@ -1544,7 +1558,7 @@ static int mlx5_vdpa_set_features(struct vdpa_device *vdev, u64 features)
print_features(mvdev, features, true);
- err = verify_min_features(mvdev, features);
+ err = verify_driver_features(mvdev, features);
if (err)
return err;
--
2.34.1
From: Quinn Tran <[email protected]>
commit afd438ff874ca40b74321b3fa19bd61adfd7ca0c upstream.
The driver makes a call into midlayer (fc_remote_port_delete) which can put
the thread to sleep. The thread that originates the call is in interrupt
context. The combination of the two trigger a crash. Schedule the call in
non-interrupt context where it is more safe.
kernel: BUG: scheduling while atomic: swapper/7/0/0x00010000
kernel: Call Trace:
kernel: <IRQ>
kernel: dump_stack+0x66/0x81
kernel: __schedule_bug.cold.90+0x5/0x1d
kernel: __schedule+0x7af/0x960
kernel: schedule+0x28/0x80
kernel: schedule_timeout+0x26d/0x3b0
kernel: wait_for_completion+0xb4/0x140
kernel: ? wake_up_q+0x70/0x70
kernel: __wait_rcu_gp+0x12c/0x160
kernel: ? sdev_evt_alloc+0xc0/0x180 [scsi_mod]
kernel: synchronize_sched+0x6c/0x80
kernel: ? call_rcu_bh+0x20/0x20
kernel: ? __bpf_trace_rcu_invoke_callback+0x10/0x10
kernel: sdev_evt_alloc+0xfd/0x180 [scsi_mod]
kernel: starget_for_each_device+0x85/0xb0 [scsi_mod]
kernel: ? scsi_init_io+0x360/0x3d0 [scsi_mod]
kernel: scsi_init_io+0x388/0x3d0 [scsi_mod]
kernel: device_for_each_child+0x54/0x90
kernel: fc_remote_port_delete+0x70/0xe0 [scsi_transport_fc]
kernel: qla2x00_schedule_rport_del+0x62/0xf0 [qla2xxx]
kernel: qla2x00_mark_device_lost+0x9c/0xd0 [qla2xxx]
kernel: qla24xx_handle_plogi_done_event+0x55f/0x570 [qla2xxx]
kernel: qla2x00_async_login_sp_done+0xd2/0x100 [qla2xxx]
kernel: qla24xx_logio_entry+0x13a/0x3c0 [qla2xxx]
kernel: qla24xx_process_response_queue+0x306/0x400 [qla2xxx]
kernel: qla24xx_msix_rsp_q+0x3f/0xb0 [qla2xxx]
kernel: __handle_irq_event_percpu+0x40/0x180
kernel: handle_irq_event_percpu+0x30/0x80
kernel: handle_irq_event+0x36/0x60
Link: https://lore.kernel.org/r/[email protected]
Cc: [email protected]
Reviewed-by: Himanshu Madhani <[email protected]>
Signed-off-by: Quinn Tran <[email protected]>
Signed-off-by: Nilesh Javali <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/qla2xxx/qla_init.c | 7 +------
1 file changed, 1 insertion(+), 6 deletions(-)
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -2114,12 +2114,7 @@ qla24xx_handle_plogi_done_event(struct s
ql_dbg(ql_dbg_disc, vha, 0x20eb, "%s %d %8phC cmd error %x\n",
__func__, __LINE__, ea->fcport->port_name, ea->data[1]);
- ea->fcport->flags &= ~FCF_ASYNC_SENT;
- qla2x00_set_fcport_disc_state(ea->fcport, DSC_LOGIN_FAILED);
- if (ea->data[1] & QLA_LOGIO_LOGIN_RETRIED)
- set_bit(RELOGIN_NEEDED, &vha->dpc_flags);
- else
- qla2x00_mark_device_lost(vha, ea->fcport, 1);
+ qlt_schedule_sess_for_deletion(ea->fcport);
break;
case MBS_LOOP_ID_USED:
/* data[1] = IO PARAM 1 = nport ID */
From: kernel test robot <[email protected]>
[ Upstream commit 6390d42c21efff0b4c10956a38e341f4e84ecd3d ]
drivers/regulator/qcom_smd-regulator.c:1318:1-33: WARNING: Function "for_each_available_child_of_node" should have of_node_put() before return around line 1321.
Semantic patch information:
False positives can be due to function calls within the for_each
loop that may encapsulate an of_node_put.
Generated by: scripts/coccinelle/iterators/for_each_child.cocci
Fixes: 14e2976fbabd ("regulator: qcom_smd: Align probe function with rpmh-regulator")
CC: Konrad Dybcio <[email protected]>
Reported-by: kernel test robot <[email protected]>
Signed-off-by: kernel test robot <[email protected]>
Signed-off-by: Julia Lawall <[email protected]>
Link: https://lore.kernel.org/r/alpine.DEB.2.22.394.2201151210170.3051@hadrien
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/regulator/qcom_smd-regulator.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/regulator/qcom_smd-regulator.c b/drivers/regulator/qcom_smd-regulator.c
index 03e146e98abd..8d784a2a09d8 100644
--- a/drivers/regulator/qcom_smd-regulator.c
+++ b/drivers/regulator/qcom_smd-regulator.c
@@ -1185,8 +1185,10 @@ static int rpm_reg_probe(struct platform_device *pdev)
for_each_available_child_of_node(dev->of_node, node) {
vreg = devm_kzalloc(&pdev->dev, sizeof(*vreg), GFP_KERNEL);
- if (!vreg)
+ if (!vreg) {
+ of_node_put(node);
return -ENOMEM;
+ }
ret = rpm_regulator_init_vreg(vreg, dev, node, rpm, vreg_data);
--
2.34.1
From: Miaoqian Lin <[email protected]>
[ Upstream commit 9531a631379169d57756b2411178c6238655df88 ]
The device_node pointer is returned by of_parse_phandle() with refcount
incremented. We should use of_node_put() on it when done.
This is similar to commit 64b92de9603f
("ASoC: wcd9335: fix a leaked reference by adding missing of_node_put")
Fixes: a61f3b4f476e ("ASoC: wcd934x: add support to wcd9340/wcd9341 codec")
Signed-off-by: Miaoqian Lin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/codecs/wcd934x.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/sound/soc/codecs/wcd934x.c b/sound/soc/codecs/wcd934x.c
index f07dea0bc27e..8540ac230d0e 100644
--- a/sound/soc/codecs/wcd934x.c
+++ b/sound/soc/codecs/wcd934x.c
@@ -5047,6 +5047,7 @@ static int wcd934x_codec_parse_data(struct wcd934x_codec *wcd)
}
wcd->sidev = of_slim_get_device(wcd->sdev->ctrl, ifc_dev_np);
+ of_node_put(ifc_dev_np);
if (!wcd->sidev) {
dev_err(dev, "Unable to get SLIM Interface device\n");
return -EINVAL;
--
2.34.1
From: Corentin Labbe <[email protected]>
[ Upstream commit 82e3a496eb56da0b9f29fdc5b63cedb3289e91de ]
Move some code out of zr36057_init() and create new functions for handling
zr->video_dev. This permit to ease code reading and fix a zr->video_dev
memory leak.
Signed-off-by: Corentin Labbe <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/staging/media/zoran/zoran.h | 2 +-
drivers/staging/media/zoran/zoran_card.c | 80 ++++++++++++++--------
drivers/staging/media/zoran/zoran_driver.c | 5 +-
3 files changed, 54 insertions(+), 33 deletions(-)
diff --git a/drivers/staging/media/zoran/zoran.h b/drivers/staging/media/zoran/zoran.h
index e7fe8da7732c..3f223e5b1872 100644
--- a/drivers/staging/media/zoran/zoran.h
+++ b/drivers/staging/media/zoran/zoran.h
@@ -314,6 +314,6 @@ static inline struct zoran *to_zoran(struct v4l2_device *v4l2_dev)
#endif
-int zoran_queue_init(struct zoran *zr, struct vb2_queue *vq);
+int zoran_queue_init(struct zoran *zr, struct vb2_queue *vq, int dir);
void zoran_queue_exit(struct zoran *zr);
int zr_set_buf(struct zoran *zr);
diff --git a/drivers/staging/media/zoran/zoran_card.c b/drivers/staging/media/zoran/zoran_card.c
index 721f1decb0a7..782bb4443fc1 100644
--- a/drivers/staging/media/zoran/zoran_card.c
+++ b/drivers/staging/media/zoran/zoran_card.c
@@ -802,6 +802,52 @@ int zoran_check_jpg_settings(struct zoran *zr,
return 0;
}
+static int zoran_init_video_device(struct zoran *zr, struct video_device *video_dev, int dir)
+{
+ int err;
+
+ /* Now add the template and register the device unit. */
+ *video_dev = zoran_template;
+ video_dev->v4l2_dev = &zr->v4l2_dev;
+ video_dev->lock = &zr->lock;
+ video_dev->device_caps = V4L2_CAP_STREAMING | dir;
+
+ strscpy(video_dev->name, ZR_DEVNAME(zr), sizeof(video_dev->name));
+ /*
+ * It's not a mem2mem device, but you can both capture and output from one and the same
+ * device. This should really be split up into two device nodes, but that's a job for
+ * another day.
+ */
+ video_dev->vfl_dir = VFL_DIR_M2M;
+ zoran_queue_init(zr, &zr->vq, V4L2_BUF_TYPE_VIDEO_CAPTURE);
+
+ err = video_register_device(video_dev, VFL_TYPE_VIDEO, video_nr[zr->id]);
+ if (err < 0)
+ return err;
+ video_set_drvdata(video_dev, zr);
+ return 0;
+}
+
+static void zoran_exit_video_devices(struct zoran *zr)
+{
+ video_unregister_device(zr->video_dev);
+ kfree(zr->video_dev);
+}
+
+static int zoran_init_video_devices(struct zoran *zr)
+{
+ int err;
+
+ zr->video_dev = video_device_alloc();
+ if (!zr->video_dev)
+ return -ENOMEM;
+
+ err = zoran_init_video_device(zr, zr->video_dev, V4L2_CAP_VIDEO_CAPTURE);
+ if (err)
+ kfree(zr->video_dev);
+ return err;
+}
+
void zoran_open_init_params(struct zoran *zr)
{
int i;
@@ -873,17 +919,11 @@ static int zr36057_init(struct zoran *zr)
zoran_open_init_params(zr);
/* allocate memory *before* doing anything to the hardware in case allocation fails */
- zr->video_dev = video_device_alloc();
- if (!zr->video_dev) {
- err = -ENOMEM;
- goto exit;
- }
zr->stat_com = dma_alloc_coherent(&zr->pci_dev->dev,
BUZ_NUM_STAT_COM * sizeof(u32),
&zr->p_sc, GFP_KERNEL);
if (!zr->stat_com) {
- err = -ENOMEM;
- goto exit_video;
+ return -ENOMEM;
}
for (j = 0; j < BUZ_NUM_STAT_COM; j++)
zr->stat_com[j] = cpu_to_le32(1); /* mark as unavailable to zr36057 */
@@ -896,26 +936,9 @@ static int zr36057_init(struct zoran *zr)
goto exit_statcom;
}
- /* Now add the template and register the device unit. */
- *zr->video_dev = zoran_template;
- zr->video_dev->v4l2_dev = &zr->v4l2_dev;
- zr->video_dev->lock = &zr->lock;
- zr->video_dev->device_caps = V4L2_CAP_STREAMING | V4L2_CAP_VIDEO_CAPTURE;
-
- strscpy(zr->video_dev->name, ZR_DEVNAME(zr), sizeof(zr->video_dev->name));
- /*
- * It's not a mem2mem device, but you can both capture and output from one and the same
- * device. This should really be split up into two device nodes, but that's a job for
- * another day.
- */
- zr->video_dev->vfl_dir = VFL_DIR_M2M;
-
- zoran_queue_init(zr, &zr->vq);
-
- err = video_register_device(zr->video_dev, VFL_TYPE_VIDEO, video_nr[zr->id]);
- if (err < 0)
+ err = zoran_init_video_devices(zr);
+ if (err)
goto exit_statcomb;
- video_set_drvdata(zr->video_dev, zr);
zoran_init_hardware(zr);
if (!pass_through) {
@@ -930,9 +953,6 @@ static int zr36057_init(struct zoran *zr)
dma_free_coherent(&zr->pci_dev->dev, BUZ_NUM_STAT_COM * sizeof(u32) * 2, zr->stat_comb, zr->p_scb);
exit_statcom:
dma_free_coherent(&zr->pci_dev->dev, BUZ_NUM_STAT_COM * sizeof(u32), zr->stat_com, zr->p_sc);
-exit_video:
- kfree(zr->video_dev);
-exit:
return err;
}
@@ -964,7 +984,7 @@ static void zoran_remove(struct pci_dev *pdev)
dma_free_coherent(&zr->pci_dev->dev, BUZ_NUM_STAT_COM * sizeof(u32) * 2, zr->stat_comb, zr->p_scb);
pci_release_regions(pdev);
pci_disable_device(zr->pci_dev);
- video_unregister_device(zr->video_dev);
+ zoran_exit_video_devices(zr);
exit_free:
v4l2_ctrl_handler_free(&zr->hdl);
v4l2_device_unregister(&zr->v4l2_dev);
diff --git a/drivers/staging/media/zoran/zoran_driver.c b/drivers/staging/media/zoran/zoran_driver.c
index 808196ea5b81..7f22596cc630 100644
--- a/drivers/staging/media/zoran/zoran_driver.c
+++ b/drivers/staging/media/zoran/zoran_driver.c
@@ -1006,7 +1006,7 @@ static const struct vb2_ops zr_video_qops = {
.wait_finish = vb2_ops_wait_finish,
};
-int zoran_queue_init(struct zoran *zr, struct vb2_queue *vq)
+int zoran_queue_init(struct zoran *zr, struct vb2_queue *vq, int dir)
{
int err;
@@ -1014,7 +1014,8 @@ int zoran_queue_init(struct zoran *zr, struct vb2_queue *vq)
INIT_LIST_HEAD(&zr->queued_bufs);
vq->dev = &zr->pci_dev->dev;
- vq->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+ vq->type = dir;
+
vq->io_modes = VB2_USERPTR | VB2_DMABUF | VB2_MMAP | VB2_READ | VB2_WRITE;
vq->drv_priv = zr;
vq->buf_struct_size = sizeof(struct zr_buffer);
--
2.34.1
From: Daniel Henrique Barboza <[email protected]>
[ Upstream commit 749ed4a20657bcea66a6e082ca3dc0d228cbec80 ]
Executing node_set_online() when nid = NUMA_NO_NODE results in an
undefined behavior. node_set_online() will call node_set_state(), into
__node_set(), into set_bit(), and since NUMA_NO_NODE is -1 we'll end up
doing a negative shift operation inside
arch/powerpc/include/asm/bitops.h. This potential UB was detected
running a kernel with CONFIG_UBSAN.
The behavior was introduced by commit 10f78fd0dabb ("powerpc/numa: Fix a
regression on memoryless node 0"), where the check for nid > 0 was
removed to fix a problem that was happening with nid = 0, but the result
is that now we're trying to online NUMA_NO_NODE nids as well.
Checking for nid >= 0 will allow node 0 to be onlined while avoiding
this UB with NUMA_NO_NODE.
Fixes: 10f78fd0dabb ("powerpc/numa: Fix a regression on memoryless node 0")
Reported-by: Ping Fang <[email protected]>
Signed-off-by: Daniel Henrique Barboza <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/mm/numa.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index 094a1076fd1f..275c60f92a7c 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -742,7 +742,9 @@ static int __init parse_numa_properties(void)
of_node_put(cpu);
}
- node_set_online(nid);
+ /* node_set_online() is an UB if 'nid' is negative */
+ if (likely(nid >= 0))
+ node_set_online(nid);
}
get_n_mem_cells(&n_mem_addr_cells, &n_mem_size_cells);
--
2.34.1
From: Marc Kleine-Budde <[email protected]>
commit 2e8e79c416aae1de224c0f1860f2e3350fa171f8 upstream.
can_put_echo_skb() will clone skb then free the skb. Move the
can_put_echo_skb() for the m_can version 3.0.x directly before the
start of the xmit in hardware, similar to the 3.1.x branch.
Fixes: 80646733f11c ("can: m_can: update to support CAN FD features")
Link: https://lore.kernel.org/all/[email protected]
Cc: [email protected]
Reported-by: Hangyu Hua <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/can/m_can/m_can.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/drivers/net/can/m_can/m_can.c
+++ b/drivers/net/can/m_can/m_can.c
@@ -1491,8 +1491,6 @@ static netdev_tx_t m_can_tx_handler(stru
M_CAN_FIFO_DATA(i / 4),
*(u32 *)(cf->data + i));
- can_put_echo_skb(skb, dev, 0);
-
if (cdev->can.ctrlmode & CAN_CTRLMODE_FD) {
cccr = m_can_read(cdev, M_CAN_CCCR);
cccr &= ~(CCCR_CMR_MASK << CCCR_CMR_SHIFT);
@@ -1509,6 +1507,9 @@ static netdev_tx_t m_can_tx_handler(stru
m_can_write(cdev, M_CAN_CCCR, cccr);
}
m_can_write(cdev, M_CAN_TXBTIE, 0x1);
+
+ can_put_echo_skb(skb, dev, 0);
+
m_can_write(cdev, M_CAN_TXBAR, 0x1);
/* End of xmit function for version 3.0.x */
} else {
From: Eddie James <[email protected]>
commit e1d15646565b284e9ef2433234d6cfdaf66695f1 upstream.
IBM manufactures a PL2303 device for UPS communications. Add the vendor
and product IDs so that the PL2303 driver binds to the device.
Signed-off-by: Eddie James <[email protected]>
Signed-off-by: Joel Stanley <[email protected]>
Signed-off-by: Eddie James <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: [email protected]
[ johan: amend the SoB chain ]
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/serial/pl2303.c | 1 +
drivers/usb/serial/pl2303.h | 3 +++
2 files changed, 4 insertions(+)
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -116,6 +116,7 @@ static const struct usb_device_id id_tab
{ USB_DEVICE(ADLINK_VENDOR_ID, ADLINK_ND6530GC_PRODUCT_ID) },
{ USB_DEVICE(SMART_VENDOR_ID, SMART_PRODUCT_ID) },
{ USB_DEVICE(AT_VENDOR_ID, AT_VTKIT3_PRODUCT_ID) },
+ { USB_DEVICE(IBM_VENDOR_ID, IBM_PRODUCT_ID) },
{ } /* Terminating entry */
};
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -35,6 +35,9 @@
#define ATEN_PRODUCT_UC232B 0x2022
#define ATEN_PRODUCT_ID2 0x2118
+#define IBM_VENDOR_ID 0x04b3
+#define IBM_PRODUCT_ID 0x4016
+
#define IODATA_VENDOR_ID 0x04bb
#define IODATA_PRODUCT_ID 0x0a03
#define IODATA_PRODUCT_ID_RSAQ5 0x0a0e
From: Athira Rajeev <[email protected]>
[ Upstream commit 0198322379c25215b2778482bf1221743a76e2b5 ]
Trace IMC (In-Memory collection counters) in powerpc is useful for
application level profiling.
For trace_imc, presently task context (task_ctx_nr) is set to
perf_hw_context. But perf_hw_context should only be used for CPU PMU.
See commit 26657848502b ("perf/core: Verify we have a single
perf_hw_context PMU").
So for trace_imc, even though it is per thread PMU, it is preferred to
use sw_context in order to be able to do application level monitoring.
Hence change the task_ctx_nr to use perf_sw_context.
Fixes: 012ae244845f ("powerpc/perf: Trace imc PMU functions")
Signed-off-by: Athira Rajeev <[email protected]>
Reviewed-by: Madhavan Srinivasan <[email protected]>
[mpe: Update subject & incorporate notes into change log, reflow comment]
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/perf/imc-pmu.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/arch/powerpc/perf/imc-pmu.c b/arch/powerpc/perf/imc-pmu.c
index 7b25548ec42b..e8074d7f2401 100644
--- a/arch/powerpc/perf/imc-pmu.c
+++ b/arch/powerpc/perf/imc-pmu.c
@@ -1457,7 +1457,11 @@ static int trace_imc_event_init(struct perf_event *event)
event->hw.idx = -1;
- event->pmu->task_ctx_nr = perf_hw_context;
+ /*
+ * There can only be a single PMU for perf_hw_context events which is assigned to
+ * core PMU. Hence use "perf_sw_context" for trace_imc.
+ */
+ event->pmu->task_ctx_nr = perf_sw_context;
event->destroy = reset_global_refc;
return 0;
}
--
2.34.1
From: Randy Dunlap <[email protected]>
[ Upstream commit 6a861abceecb68497dd82a324fee45a5332dcece ]
__setup() handlers should return 1 to obsolete_checksetup() in
init/main.c to indicate that the boot option has been handled.
A return of 0 causes the boot option/value to be listed as an Unknown
kernel parameter and added to init's (limited) environment strings.
The __setup() handler interface isn't meant to handle negative return
values -- they are non-zero, so they mean "handled" (like a return
value of 1 does), but that's just a quirk. So return 1 from
parse_pmtmr(). Also print a warning message if kstrtouint() returns
an error.
Fixes: 6b148507d3d0 ("pmtmr: allow command line override of ioport")
Signed-off-by: Randy Dunlap <[email protected]>
Reported-by: Igor Zhbanov <[email protected]>
Link: lore.kernel.org/r/[email protected]
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clocksource/acpi_pm.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/clocksource/acpi_pm.c b/drivers/clocksource/acpi_pm.c
index eb596ff9e7bb..279ddff81ab4 100644
--- a/drivers/clocksource/acpi_pm.c
+++ b/drivers/clocksource/acpi_pm.c
@@ -229,8 +229,10 @@ static int __init parse_pmtmr(char *arg)
int ret;
ret = kstrtouint(arg, 16, &base);
- if (ret)
- return ret;
+ if (ret) {
+ pr_warn("PMTMR: invalid 'pmtmr=' value: '%s'\n", arg);
+ return 1;
+ }
pr_info("PMTMR IOPort override: 0x%04x -> 0x%04x\n", pmtmr_ioport,
base);
--
2.34.1
From: Colin Ian King <[email protected]>
[ Upstream commit c305c94bdc18e45b5ad1db54da4269f8cbfdff6b ]
Currently the error -EIO is being assinged to variable ret when
the READY_BIT is not set but the function iwlagn_mac_start returns
0 rather than ret. Fix this by returning ret instead of 0.
Addresses-Coverity: ("Unused value")
Fixes: 7335613ae27a ("iwlwifi: move all mac80211 related functions to one place")
Signed-off-by: Colin Ian King <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Luca Coelho <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/intel/iwlwifi/dvm/mac80211.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/intel/iwlwifi/dvm/mac80211.c b/drivers/net/wireless/intel/iwlwifi/dvm/mac80211.c
index 423d3c396b2d..1e21cdbb7313 100644
--- a/drivers/net/wireless/intel/iwlwifi/dvm/mac80211.c
+++ b/drivers/net/wireless/intel/iwlwifi/dvm/mac80211.c
@@ -304,7 +304,7 @@ static int iwlagn_mac_start(struct ieee80211_hw *hw)
priv->is_open = 1;
IWL_DEBUG_MAC80211(priv, "leave\n");
- return 0;
+ return ret;
}
static void iwlagn_mac_stop(struct ieee80211_hw *hw)
--
2.34.1
From: Jocelyn Falempe <[email protected]>
commit 028a73e10705af1ffd51f2537460f616dc58680e upstream.
On some servers with MGA G200_SE_A (rev 42), booting with Legacy BIOS,
the hardware hangs when using kdump and kexec into the kdump kernel.
This happens when the uncompress code tries to write "Decompressing Linux"
to the VGA Console.
It can be reproduced by writing to the VGA console (0xB8000) after
booting to graphic mode, it generates the following error:
kernel:NMI: PCI system error (SERR) for reason a0 on CPU 0.
kernel:Dazed and confused, but trying to continue
The root cause is the configuration of the MGA GCTL6 register
According to the GCTL6 register documentation:
bit 0 is gcgrmode:
0: Enables alpha mode, and the character generator addressing system is
activated.
1: Enables graphics mode, and the character addressing system is not
used.
bit 1 is chainodd even:
0: The A0 signal of the memory address bus is used during system memory
addressing.
1: Allows A0 to be replaced by either the A16 signal of the system
address (ifmemmapsl is ‘00’), or by the hpgoddev (MISC<5>, odd/even
page select) field, described on page 3-294).
bit 3-2 are memmapsl:
Memory map select bits 1 and 0. VGA.
These bits select where the video memory is mapped, as shown below:
00 => A0000h - BFFFFh
01 => A0000h - AFFFFh
10 => B0000h - B7FFFh
11 => B8000h - BFFFFh
bit 7-4 are reserved.
Current code set it to 0x05 => memmapsl to b01 => 0xa0000 (graphic mode)
But on x86, the VGA console is at 0xb8000 (text mode)
In arch/x86/boot/compressed/misc.c debug strings are written to 0xb8000
As the driver doesn't use this mapping at 0xa0000, it is safe to set it to
0xb8000 instead, to avoid kernel hang on G200_SE_A rev42, with kexec/kdump.
Thus changing the value 0x05 to 0x0d
Signed-off-by: Jocelyn Falempe <[email protected]>
Reviewed-by: Javier Martinez Canillas <[email protected]>
Acked-by: Lyude Paul <[email protected]>
Cc: [email protected]
Signed-off-by: Thomas Zimmermann <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/mgag200/mgag200_mode.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/drivers/gpu/drm/mgag200/mgag200_mode.c
+++ b/drivers/gpu/drm/mgag200/mgag200_mode.c
@@ -1243,7 +1243,10 @@ static void mgag200_set_format_regs(stru
WREG_GFX(3, 0x00);
WREG_GFX(4, 0x00);
WREG_GFX(5, 0x40);
- WREG_GFX(6, 0x05);
+ /* GCTL6 should be 0x05, but we configure memmapsl to 0xb8000 (text mode),
+ * so that it doesn't hang when running kexec/kdump on G200_SE rev42.
+ */
+ WREG_GFX(6, 0x0d);
WREG_GFX(7, 0x0f);
WREG_GFX(8, 0x0f);
From: Kuan-Ying Lee <[email protected]>
commit bfc8089f00fa526dea983844c880fa8106c33ac4 upstream.
When we use HW-tag based kasan and enable vmalloc support, we hit the
following bug. It is due to comparison between tagged object and
non-tagged pointer.
We need to reset the kasan tag when we need to compare tagged object and
non-tagged pointer.
kmemleak: [name:kmemleak&]Scan area larger than object 0xffffffe77076f440
CPU: 4 PID: 1 Comm: init Tainted: G S W 5.15.25-android13-0-g5cacf919c2bc #1
Hardware name: MT6983(ENG) (DT)
Call trace:
add_scan_area+0xc4/0x244
kmemleak_scan_area+0x40/0x9c
layout_and_allocate+0x1e8/0x288
load_module+0x2c8/0xf00
__se_sys_finit_module+0x190/0x1d0
__arm64_sys_finit_module+0x20/0x30
invoke_syscall+0x60/0x170
el0_svc_common+0xc8/0x114
do_el0_svc+0x28/0xa0
el0_svc+0x60/0xf8
el0t_64_sync_handler+0x88/0xec
el0t_64_sync+0x1b4/0x1b8
kmemleak: [name:kmemleak&]Object 0xf5ffffe77076b000 (size 32768):
kmemleak: [name:kmemleak&] comm "init", pid 1, jiffies 4294894197
kmemleak: [name:kmemleak&] min_count = 0
kmemleak: [name:kmemleak&] count = 0
kmemleak: [name:kmemleak&] flags = 0x1
kmemleak: [name:kmemleak&] checksum = 0
kmemleak: [name:kmemleak&] backtrace:
module_alloc+0x9c/0x120
move_module+0x34/0x19c
layout_and_allocate+0x1c4/0x288
load_module+0x2c8/0xf00
__se_sys_finit_module+0x190/0x1d0
__arm64_sys_finit_module+0x20/0x30
invoke_syscall+0x60/0x170
el0_svc_common+0xc8/0x114
do_el0_svc+0x28/0xa0
el0_svc+0x60/0xf8
el0t_64_sync_handler+0x88/0xec
el0t_64_sync+0x1b4/0x1b8
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Kuan-Ying Lee <[email protected]>
Reviewed-by: Catalin Marinas <[email protected]>
Cc: Matthias Brugger <[email protected]>
Cc: Chinwen Chang <[email protected]>
Cc: Nicholas Tang <[email protected]>
Cc: Yee Lee <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/kmemleak.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
--- a/mm/kmemleak.c
+++ b/mm/kmemleak.c
@@ -787,6 +787,8 @@ static void add_scan_area(unsigned long
unsigned long flags;
struct kmemleak_object *object;
struct kmemleak_scan_area *area = NULL;
+ unsigned long untagged_ptr;
+ unsigned long untagged_objp;
object = find_and_get_object(ptr, 1);
if (!object) {
@@ -795,6 +797,9 @@ static void add_scan_area(unsigned long
return;
}
+ untagged_ptr = (unsigned long)kasan_reset_tag((void *)ptr);
+ untagged_objp = (unsigned long)kasan_reset_tag((void *)object->pointer);
+
if (scan_area_cache)
area = kmem_cache_alloc(scan_area_cache, gfp_kmemleak_mask(gfp));
@@ -806,8 +811,8 @@ static void add_scan_area(unsigned long
goto out_unlock;
}
if (size == SIZE_MAX) {
- size = object->pointer + object->size - ptr;
- } else if (ptr + size > object->pointer + object->size) {
+ size = untagged_objp + object->size - untagged_ptr;
+ } else if (untagged_ptr + size > untagged_objp + object->size) {
kmemleak_warn("Scan area larger than object 0x%08lx\n", ptr);
dump_object_info(object);
kmem_cache_free(scan_area_cache, area);
From: Vitaly Kuznetsov <[email protected]>
commit b1e34d325397a33d97d845e312d7cf2a8b646b44 upstream.
Setting non-zero values to SYNIC/STIMER MSRs activates certain features,
this should not happen when KVM_CAP_HYPERV_SYNIC{,2} was not activated.
Note, it would've been better to forbid writing anything to SYNIC/STIMER
MSRs, including zeroes, however, at least QEMU tries clearing
HV_X64_MSR_STIMER0_CONFIG without SynIC. HV_X64_MSR_EOM MSR is somewhat
'special' as writing zero there triggers an action, this also should not
happen when SynIC wasn't activated.
Signed-off-by: Vitaly Kuznetsov <[email protected]>
Message-Id: <[email protected]>
Cc: [email protected]
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kvm/hyperv.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
--- a/arch/x86/kvm/hyperv.c
+++ b/arch/x86/kvm/hyperv.c
@@ -207,7 +207,7 @@ static int synic_set_msr(struct kvm_vcpu
struct kvm_vcpu *vcpu = synic_to_vcpu(synic);
int ret;
- if (!synic->active && !host)
+ if (!synic->active && (!host || data))
return 1;
trace_kvm_hv_synic_set_msr(vcpu->vcpu_id, msr, data, host);
@@ -253,6 +253,9 @@ static int synic_set_msr(struct kvm_vcpu
case HV_X64_MSR_EOM: {
int i;
+ if (!synic->active)
+ break;
+
for (i = 0; i < ARRAY_SIZE(synic->sint); i++)
kvm_hv_notify_acked_sint(vcpu, i);
break;
@@ -636,7 +639,7 @@ static int stimer_set_config(struct kvm_
struct kvm_vcpu *vcpu = stimer_to_vcpu(stimer);
struct kvm_vcpu_hv_synic *synic = vcpu_to_synic(vcpu);
- if (!synic->active && !host)
+ if (!synic->active && (!host || config))
return 1;
trace_kvm_hv_stimer_set_config(stimer_to_vcpu(stimer)->vcpu_id,
@@ -660,7 +663,7 @@ static int stimer_set_count(struct kvm_v
struct kvm_vcpu *vcpu = stimer_to_vcpu(stimer);
struct kvm_vcpu_hv_synic *synic = vcpu_to_synic(vcpu);
- if (!synic->active && !host)
+ if (!synic->active && (!host || count))
return 1;
trace_kvm_hv_stimer_set_count(stimer_to_vcpu(stimer)->vcpu_id,
From: Arun Easi <[email protected]>
commit c85ab7d9e27a80e48d5b7d7fb2fe2b0fdb2de523 upstream.
At NVMe ELS request time, request structure is DMA mapped and never
unmapped. Fix this by calling the unmap on ELS completion.
Link: https://lore.kernel.org/r/[email protected]
Fixes: e84067d74301 ("scsi: qla2xxx: Add FC-NVMe F/W initialization and transport registration")
Cc: [email protected]
Reviewed-by: Himanshu Madhani <[email protected]>
Signed-off-by: Arun Easi <[email protected]>
Signed-off-by: Nilesh Javali <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/qla2xxx/qla_nvme.c | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
--- a/drivers/scsi/qla2xxx/qla_nvme.c
+++ b/drivers/scsi/qla2xxx/qla_nvme.c
@@ -170,6 +170,18 @@ out:
qla2xxx_rel_qpair_sp(sp->qpair, sp);
}
+static void qla_nvme_ls_unmap(struct srb *sp, struct nvmefc_ls_req *fd)
+{
+ if (sp->flags & SRB_DMA_VALID) {
+ struct srb_iocb *nvme = &sp->u.iocb_cmd;
+ struct qla_hw_data *ha = sp->fcport->vha->hw;
+
+ dma_unmap_single(&ha->pdev->dev, nvme->u.nvme.cmd_dma,
+ fd->rqstlen, DMA_TO_DEVICE);
+ sp->flags &= ~SRB_DMA_VALID;
+ }
+}
+
static void qla_nvme_release_ls_cmd_kref(struct kref *kref)
{
struct srb *sp = container_of(kref, struct srb, cmd_kref);
@@ -186,6 +198,8 @@ static void qla_nvme_release_ls_cmd_kref
spin_unlock_irqrestore(&priv->cmd_lock, flags);
fd = priv->fd;
+
+ qla_nvme_ls_unmap(sp, fd);
fd->done(fd, priv->comp_status);
out:
qla2x00_rel_sp(sp);
@@ -332,6 +346,8 @@ static int qla_nvme_ls_req(struct nvme_f
dma_sync_single_for_device(&ha->pdev->dev, nvme->u.nvme.cmd_dma,
fd->rqstlen, DMA_TO_DEVICE);
+ sp->flags |= SRB_DMA_VALID;
+
rval = qla2x00_start_sp(sp);
if (rval != QLA_SUCCESS) {
ql_log(ql_log_warn, vha, 0x700e,
@@ -339,6 +355,7 @@ static int qla_nvme_ls_req(struct nvme_f
wake_up(&sp->nvme_ls_waitq);
sp->priv = NULL;
priv->sp = NULL;
+ qla_nvme_ls_unmap(sp, fd);
qla2x00_rel_sp(sp);
return rval;
}
From: Abel Vesa <[email protected]>
[ Upstream commit 4cb7df64c732b2b9918424095c11660c2a8c4a33 ]
The audio_mclk_root_clk was added as a gate with the CCGR121 (0x4790),
but according to the reference manual, there is no such gate. Moreover,
the consumer driver of the mentioned clock might gate it and leave
the ECSPI2 (the true owner of that gate) hanging. So lets use the
audio_mclk_post_div, which is the parent.
Signed-off-by: Abel Vesa <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/imx7-colibri.dtsi | 4 ++--
arch/arm/boot/dts/imx7-mba7.dtsi | 2 +-
arch/arm/boot/dts/imx7d-nitrogen7.dts | 2 +-
arch/arm/boot/dts/imx7d-pico-hobbit.dts | 4 ++--
arch/arm/boot/dts/imx7d-pico-pi.dts | 4 ++--
arch/arm/boot/dts/imx7d-sdb.dts | 4 ++--
arch/arm/boot/dts/imx7s-warp.dts | 4 ++--
7 files changed, 12 insertions(+), 12 deletions(-)
diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi
index 62b771c1d5a9..f1c60b0cb143 100644
--- a/arch/arm/boot/dts/imx7-colibri.dtsi
+++ b/arch/arm/boot/dts/imx7-colibri.dtsi
@@ -40,7 +40,7 @@
dailink_master: simple-audio-card,codec {
sound-dai = <&codec>;
- clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+ clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
};
};
};
@@ -293,7 +293,7 @@
compatible = "fsl,sgtl5000";
#sound-dai-cells = <0>;
reg = <0x0a>;
- clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+ clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sai1_mclk>;
VDDA-supply = <®_module_3v3_avdd>;
diff --git a/arch/arm/boot/dts/imx7-mba7.dtsi b/arch/arm/boot/dts/imx7-mba7.dtsi
index 50abf18ad30b..887497e3bb4b 100644
--- a/arch/arm/boot/dts/imx7-mba7.dtsi
+++ b/arch/arm/boot/dts/imx7-mba7.dtsi
@@ -250,7 +250,7 @@
tlv320aic32x4: audio-codec@18 {
compatible = "ti,tlv320aic32x4";
reg = <0x18>;
- clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+ clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
clock-names = "mclk";
ldoin-supply = <®_audio_3v3>;
iov-supply = <®_audio_3v3>;
diff --git a/arch/arm/boot/dts/imx7d-nitrogen7.dts b/arch/arm/boot/dts/imx7d-nitrogen7.dts
index e0751e6ba3c0..a31de900139d 100644
--- a/arch/arm/boot/dts/imx7d-nitrogen7.dts
+++ b/arch/arm/boot/dts/imx7d-nitrogen7.dts
@@ -288,7 +288,7 @@
codec: wm8960@1a {
compatible = "wlf,wm8960";
reg = <0x1a>;
- clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+ clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
clock-names = "mclk";
wlf,shared-lrclk;
};
diff --git a/arch/arm/boot/dts/imx7d-pico-hobbit.dts b/arch/arm/boot/dts/imx7d-pico-hobbit.dts
index 7b2198a9372c..d917dc4f2f22 100644
--- a/arch/arm/boot/dts/imx7d-pico-hobbit.dts
+++ b/arch/arm/boot/dts/imx7d-pico-hobbit.dts
@@ -31,7 +31,7 @@
dailink_master: simple-audio-card,codec {
sound-dai = <&sgtl5000>;
- clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+ clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
};
};
};
@@ -41,7 +41,7 @@
#sound-dai-cells = <0>;
reg = <0x0a>;
compatible = "fsl,sgtl5000";
- clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+ clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
VDDA-supply = <®_2p5v>;
VDDIO-supply = <®_vref_1v8>;
};
diff --git a/arch/arm/boot/dts/imx7d-pico-pi.dts b/arch/arm/boot/dts/imx7d-pico-pi.dts
index 70bea95c06d8..f263e391e24c 100644
--- a/arch/arm/boot/dts/imx7d-pico-pi.dts
+++ b/arch/arm/boot/dts/imx7d-pico-pi.dts
@@ -31,7 +31,7 @@
dailink_master: simple-audio-card,codec {
sound-dai = <&sgtl5000>;
- clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+ clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
};
};
};
@@ -41,7 +41,7 @@
#sound-dai-cells = <0>;
reg = <0x0a>;
compatible = "fsl,sgtl5000";
- clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+ clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
VDDA-supply = <®_2p5v>;
VDDIO-supply = <®_vref_1v8>;
};
diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts
index ac0751bc1177..6823b9f1a2a3 100644
--- a/arch/arm/boot/dts/imx7d-sdb.dts
+++ b/arch/arm/boot/dts/imx7d-sdb.dts
@@ -378,14 +378,14 @@
codec: wm8960@1a {
compatible = "wlf,wm8960";
reg = <0x1a>;
- clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+ clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
clock-names = "mclk";
wlf,shared-lrclk;
wlf,hp-cfg = <2 2 3>;
wlf,gpio-cfg = <1 3>;
assigned-clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_SRC>,
<&clks IMX7D_PLL_AUDIO_POST_DIV>,
- <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+ <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
assigned-clock-rates = <0>, <884736000>, <12288000>;
};
diff --git a/arch/arm/boot/dts/imx7s-warp.dts b/arch/arm/boot/dts/imx7s-warp.dts
index d6b4888fa686..e035dd5bf4f6 100644
--- a/arch/arm/boot/dts/imx7s-warp.dts
+++ b/arch/arm/boot/dts/imx7s-warp.dts
@@ -75,7 +75,7 @@
dailink_master: simple-audio-card,codec {
sound-dai = <&codec>;
- clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+ clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
};
};
};
@@ -232,7 +232,7 @@
#sound-dai-cells = <0>;
reg = <0x0a>;
compatible = "fsl,sgtl5000";
- clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+ clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sai1_mclk>;
VDDA-supply = <&vgen4_reg>;
--
2.34.1
From: Anton Ivanov <[email protected]>
commit 1a3a6a2a035bb6c3a7ef4c788d8fd69a7b2d6284 upstream.
Moving to an EPOLL based IRQ controller broke uml_mconsole stop/go
commands. This fixes it and restores stop/go functionality.
Fixes: ff6a17989c08 ("Epoll based IRQ controller")
Signed-off-by: Anton Ivanov <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/um/drivers/mconsole_kern.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/arch/um/drivers/mconsole_kern.c
+++ b/arch/um/drivers/mconsole_kern.c
@@ -223,7 +223,7 @@ void mconsole_go(struct mc_request *req)
void mconsole_stop(struct mc_request *req)
{
- deactivate_fd(req->originating_fd, MCONSOLE_IRQ);
+ block_signals();
os_set_fd_block(req->originating_fd, 1);
mconsole_reply(req, "stopped", 0, 0);
for (;;) {
@@ -246,6 +246,7 @@ void mconsole_stop(struct mc_request *re
}
os_set_fd_block(req->originating_fd, 0);
mconsole_reply(req, "", 0, 0);
+ unblock_signals();
}
static DEFINE_SPINLOCK(mc_devices_lock);
From: Darren Hart <[email protected]>
[ Upstream commit 3f8dec116210ca649163574ed5f8df1e3b837d07 ]
Platforms with large BERT table data can trigger soft lockup errors
while attempting to print the entire BERT table data to the console at
boot:
watchdog: BUG: soft lockup - CPU#160 stuck for 23s! [swapper/0:1]
Observed on Ampere Altra systems with a single BERT record of ~250KB.
The original bert driver appears to have assumed relatively small table
data. Since it is impractical to reassemble large table data from
interwoven console messages, and the table data is available in
/sys/firmware/acpi/tables/data/BERT
limit the size for tables printed to the console to 1024 (for no reason
other than it seemed like a good place to kick off the discussion, would
appreciate feedback from existing users in terms of what size would
maintain their current usage model).
Alternatively, we could make printing a CONFIG option, use the
bert_disable boot arg (or something similar), or use a debug log level.
However, all those solutions require extra steps or change the existing
behavior for small table data. Limiting the size preserves existing
behavior on existing platforms with small table data, and eliminates the
soft lockups for platforms with large table data, while still making it
available.
Signed-off-by: Darren Hart <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/acpi/apei/bert.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/acpi/apei/bert.c b/drivers/acpi/apei/bert.c
index 86211422f4ee..598fd19b65fa 100644
--- a/drivers/acpi/apei/bert.c
+++ b/drivers/acpi/apei/bert.c
@@ -29,6 +29,7 @@
#undef pr_fmt
#define pr_fmt(fmt) "BERT: " fmt
+#define ACPI_BERT_PRINT_MAX_LEN 1024
static int bert_disable;
@@ -58,8 +59,11 @@ static void __init bert_print_all(struct acpi_bert_region *region,
}
pr_info_once("Error records from previous boot:\n");
-
- cper_estatus_print(KERN_INFO HW_ERR, estatus);
+ if (region_len < ACPI_BERT_PRINT_MAX_LEN)
+ cper_estatus_print(KERN_INFO HW_ERR, estatus);
+ else
+ pr_info_once("Max print length exceeded, table data is available at:\n"
+ "/sys/firmware/acpi/tables/data/BERT");
/*
* Because the boot error source is "one-time polled" type,
--
2.34.1
From: Jiasheng Jiang <[email protected]>
[ Upstream commit 13262fc26c1837c51a5131dbbdd67a2387f8bfc7 ]
As the potential failure of the dma_set_mask(),
it should be better to check it and return error
if fails.
Fixes: 126bdb606fd2 ("spi: spi-zynqmp-gqspi: return -ENOMEM if dma_map_single fails")
Signed-off-by: Jiasheng Jiang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/spi/spi-zynqmp-gqspi.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/spi/spi-zynqmp-gqspi.c b/drivers/spi/spi-zynqmp-gqspi.c
index 1dd2af9cc237..3d3ac48243eb 100644
--- a/drivers/spi/spi-zynqmp-gqspi.c
+++ b/drivers/spi/spi-zynqmp-gqspi.c
@@ -1165,7 +1165,10 @@ static int zynqmp_qspi_probe(struct platform_device *pdev)
goto clk_dis_all;
}
- dma_set_mask(&pdev->dev, DMA_BIT_MASK(44));
+ ret = dma_set_mask(&pdev->dev, DMA_BIT_MASK(44));
+ if (ret)
+ goto clk_dis_all;
+
ctlr->bits_per_word_mask = SPI_BPW_MASK(8);
ctlr->num_chipselect = GQSPI_DEFAULT_NUM_CS;
ctlr->mem_ops = &zynqmp_qspi_mem_ops;
--
2.34.1
From: Shannon Nelson <[email protected]>
[ Upstream commit bc0bf9de6f48268f4ee59e57fb42ac751be3ecda ]
Sparse seems to have gotten a little more picky lately and
we need to revisit this bit of code to make sparse happy.
warning: incorrect type in initializer (different address spaces)
expected union ionic_dev_cmd_regs *regs
got union ionic_dev_cmd_regs [noderef] __iomem *dev_cmd_regs
warning: incorrect type in argument 2 (different address spaces)
expected void [noderef] __iomem *
got unsigned int *
warning: incorrect type in argument 1 (different address spaces)
expected void volatile [noderef] __iomem *
got union ionic_dev_cmd *
Fixes: d701ec326a31 ("ionic: clean up sparse complaints")
Signed-off-by: Shannon Nelson <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/pensando/ionic/ionic_main.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/pensando/ionic/ionic_main.c b/drivers/net/ethernet/pensando/ionic/ionic_main.c
index d355676f6c16..e14869a2e24a 100644
--- a/drivers/net/ethernet/pensando/ionic/ionic_main.c
+++ b/drivers/net/ethernet/pensando/ionic/ionic_main.c
@@ -311,10 +311,10 @@ int ionic_adminq_post_wait(struct ionic_lif *lif, struct ionic_admin_ctx *ctx)
static void ionic_dev_cmd_clean(struct ionic *ionic)
{
- union __iomem ionic_dev_cmd_regs *regs = ionic->idev.dev_cmd_regs;
+ struct ionic_dev *idev = &ionic->idev;
- iowrite32(0, ®s->doorbell);
- memset_io(®s->cmd, 0, sizeof(regs->cmd));
+ iowrite32(0, &idev->dev_cmd_regs->doorbell);
+ memset_io(&idev->dev_cmd_regs->cmd, 0, sizeof(idev->dev_cmd_regs->cmd));
}
int ionic_dev_cmd_wait(struct ionic *ionic, unsigned long max_seconds)
--
2.34.1
From: Pavel Begunkov <[email protected]>
commit c86d18f4aa93e0e66cda0e55827cd03eea6bc5f8 upstream.
When there are no files for __io_sqe_files_scm() to process in the
range, it'll free everything and return. However, it forgets to put uid.
Fixes: 08a451739a9b5 ("io_uring: allow sparse fixed file sets")
Signed-off-by: Pavel Begunkov <[email protected]>
Link: https://lore.kernel.org/r/accee442376f33ce8aaebb099d04967533efde92.1648226048.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/io_uring.c | 1 +
1 file changed, 1 insertion(+)
--- a/fs/io_uring.c
+++ b/fs/io_uring.c
@@ -7350,6 +7350,7 @@ static int __io_sqe_files_scm(struct io_
fput(fpl->fp[i]);
} else {
kfree_skb(skb);
+ free_uid(fpl->user);
kfree(fpl);
}
From: Paulo Alcantara <[email protected]>
commit b92e358757b91c2827af112cae9af513f26a3f34 upstream.
When calling smb2_ioctl_query_info() with
smb_query_info::flags=PASSTHRU_FSCTL and
smb_query_info::output_buffer_length=0, the following would return
0x10
buffer = memdup_user(arg + sizeof(struct smb_query_info),
qi.output_buffer_length);
if (IS_ERR(buffer)) {
kfree(vars);
return PTR_ERR(buffer);
}
rather than a valid pointer thus making IS_ERR() check fail. This
would then cause a NULL ptr deference in @buffer when accessing it
later in smb2_ioctl_query_ioctl(). While at it, prevent having a
@buffer smaller than 8 bytes to correctly handle SMB2_SET_INFO
FileEndOfFileInformation requests when
smb_query_info::flags=PASSTHRU_SET_INFO.
Here is a small C reproducer which triggers a NULL ptr in @buffer when
passing an invalid smb_query_info::flags
#include <stdio.h>
#include <stdlib.h>
#include <stdint.h>
#include <unistd.h>
#include <fcntl.h>
#include <sys/ioctl.h>
#define die(s) perror(s), exit(1)
#define QUERY_INFO 0xc018cf07
int main(int argc, char *argv[])
{
int fd;
if (argc < 2)
exit(1);
fd = open(argv[1], O_RDONLY);
if (fd == -1)
die("open");
if (ioctl(fd, QUERY_INFO, (uint32_t[]) { 0, 0, 0, 4, 0, 0}) == -1)
die("ioctl");
close(fd);
return 0;
}
mount.cifs //srv/share /mnt -o ...
gcc repro.c && ./a.out /mnt/f0
[ 114.138620] general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN NOPTI
[ 114.139310] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
[ 114.139775] CPU: 2 PID: 995 Comm: a.out Not tainted 5.17.0-rc8 #1
[ 114.140148] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.15.0-0-g2dd4b9b-rebuilt.opensuse.org 04/01/2014
[ 114.140818] RIP: 0010:smb2_ioctl_query_info+0x206/0x410 [cifs]
[ 114.141221] Code: 00 00 00 00 fc ff df 48 c1 ea 03 80 3c 02 00 0f 85 c8 01 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8b 7b 28 4c 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 9c 01 00 00 49 8b 3f e8 58 02 fb ff 48 8b 14 24
[ 114.142348] RSP: 0018:ffffc90000b47b00 EFLAGS: 00010256
[ 114.142692] RAX: dffffc0000000000 RBX: ffff888115503200 RCX: ffffffffa020580d
[ 114.143119] RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffffa043a380
[ 114.143544] RBP: ffff888115503278 R08: 0000000000000001 R09: 0000000000000003
[ 114.143983] R10: fffffbfff4087470 R11: 0000000000000001 R12: ffff888115503288
[ 114.144424] R13: 00000000ffffffea R14: ffff888115503228 R15: 0000000000000000
[ 114.144852] FS: 00007f7aeabdf740(0000) GS:ffff888151600000(0000) knlGS:0000000000000000
[ 114.145338] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 114.145692] CR2: 00007f7aeacfdf5e CR3: 000000012000e000 CR4: 0000000000350ee0
[ 114.146131] Call Trace:
[ 114.146291] <TASK>
[ 114.146432] ? smb2_query_reparse_tag+0x890/0x890 [cifs]
[ 114.146800] ? cifs_mapchar+0x460/0x460 [cifs]
[ 114.147121] ? rcu_read_lock_sched_held+0x3f/0x70
[ 114.147412] ? cifs_strndup_to_utf16+0x15b/0x250 [cifs]
[ 114.147775] ? dentry_path_raw+0xa6/0xf0
[ 114.148024] ? cifs_convert_path_to_utf16+0x198/0x220 [cifs]
[ 114.148413] ? smb2_check_message+0x1080/0x1080 [cifs]
[ 114.148766] ? rcu_read_lock_sched_held+0x3f/0x70
[ 114.149065] cifs_ioctl+0x1577/0x3320 [cifs]
[ 114.149371] ? lock_downgrade+0x6f0/0x6f0
[ 114.149631] ? cifs_readdir+0x2e60/0x2e60 [cifs]
[ 114.149956] ? rcu_read_lock_sched_held+0x3f/0x70
[ 114.150250] ? __rseq_handle_notify_resume+0x80b/0xbe0
[ 114.150562] ? __up_read+0x192/0x710
[ 114.150791] ? __ia32_sys_rseq+0xf0/0xf0
[ 114.151025] ? __x64_sys_openat+0x11f/0x1d0
[ 114.151296] __x64_sys_ioctl+0x127/0x190
[ 114.151549] do_syscall_64+0x3b/0x90
[ 114.151768] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 114.152079] RIP: 0033:0x7f7aead043df
[ 114.152306] Code: 00 48 89 44 24 18 31 c0 48 8d 44 24 60 c7 04 24 10 00 00 00 48 89 44 24 08 48 8d 44 24 20 48 89 44 24 10 b8 10 00 00 00 0f 05 <41> 89 c0 3d 00 f0 ff ff 77 1f 48 8b 44 24 18 64 48 2b 04 25 28 00
[ 114.153431] RSP: 002b:00007ffc2e0c1f80 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[ 114.153890] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f7aead043df
[ 114.154315] RDX: 00007ffc2e0c1ff0 RSI: 00000000c018cf07 RDI: 0000000000000003
[ 114.154747] RBP: 00007ffc2e0c2010 R08: 00007f7aeae03db0 R09: 00007f7aeae24c4e
[ 114.155192] R10: 00007f7aeabf7d40 R11: 0000000000000246 R12: 00007ffc2e0c2128
[ 114.155642] R13: 0000000000401176 R14: 0000000000403df8 R15: 00007f7aeae57000
[ 114.156071] </TASK>
[ 114.156218] Modules linked in: cifs cifs_arc4 cifs_md4 bpf_preload
[ 114.156608] ---[ end trace 0000000000000000 ]---
[ 114.156898] RIP: 0010:smb2_ioctl_query_info+0x206/0x410 [cifs]
[ 114.157792] Code: 00 00 00 00 fc ff df 48 c1 ea 03 80 3c 02 00 0f 85 c8 01 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8b 7b 28 4c 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 9c 01 00 00 49 8b 3f e8 58 02 fb ff 48 8b 14 24
[ 114.159293] RSP: 0018:ffffc90000b47b00 EFLAGS: 00010256
[ 114.159641] RAX: dffffc0000000000 RBX: ffff888115503200 RCX: ffffffffa020580d
[ 114.160093] RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffffa043a380
[ 114.160699] RBP: ffff888115503278 R08: 0000000000000001 R09: 0000000000000003
[ 114.161196] R10: fffffbfff4087470 R11: 0000000000000001 R12: ffff888115503288
[ 114.155642] R13: 0000000000401176 R14: 0000000000403df8 R15: 00007f7aeae57000
[ 114.156071] </TASK>
[ 114.156218] Modules linked in: cifs cifs_arc4 cifs_md4 bpf_preload
[ 114.156608] ---[ end trace 0000000000000000 ]---
[ 114.156898] RIP: 0010:smb2_ioctl_query_info+0x206/0x410 [cifs]
[ 114.157792] Code: 00 00 00 00 fc ff df 48 c1 ea 03 80 3c 02 00 0f 85 c8 01 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8b 7b 28 4c 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 9c 01 00 00 49 8b 3f e8 58 02 fb ff 48 8b 14 24
[ 114.159293] RSP: 0018:ffffc90000b47b00 EFLAGS: 00010256
[ 114.159641] RAX: dffffc0000000000 RBX: ffff888115503200 RCX: ffffffffa020580d
[ 114.160093] RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffffa043a380
[ 114.160699] RBP: ffff888115503278 R08: 0000000000000001 R09: 0000000000000003
[ 114.161196] R10: fffffbfff4087470 R11: 0000000000000001 R12: ffff888115503288
[ 114.161823] R13: 00000000ffffffea R14: ffff888115503228 R15: 0000000000000000
[ 114.162274] FS: 00007f7aeabdf740(0000) GS:ffff888151600000(0000) knlGS:0000000000000000
[ 114.162853] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 114.163218] CR2: 00007f7aeacfdf5e CR3: 000000012000e000 CR4: 0000000000350ee0
[ 114.163691] Kernel panic - not syncing: Fatal exception
[ 114.164087] Kernel Offset: disabled
[ 114.164316] ---[ end Kernel panic - not syncing: Fatal exception ]---
Cc: [email protected]
Signed-off-by: Paulo Alcantara (SUSE) <[email protected]>
Signed-off-by: Steve French <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/cifs/smb2ops.c | 16 ++++++++++------
1 file changed, 10 insertions(+), 6 deletions(-)
--- a/fs/cifs/smb2ops.c
+++ b/fs/cifs/smb2ops.c
@@ -1551,11 +1551,12 @@ smb2_ioctl_query_info(const unsigned int
if (smb3_encryption_required(tcon))
flags |= CIFS_TRANSFORM_REQ;
- buffer = memdup_user(arg + sizeof(struct smb_query_info),
- qi.output_buffer_length);
- if (IS_ERR(buffer)) {
- kfree(vars);
- return PTR_ERR(buffer);
+ if (qi.output_buffer_length) {
+ buffer = memdup_user(arg + sizeof(struct smb_query_info), qi.output_buffer_length);
+ if (IS_ERR(buffer)) {
+ kfree(vars);
+ return PTR_ERR(buffer);
+ }
}
/* Open */
@@ -1618,10 +1619,13 @@ smb2_ioctl_query_info(const unsigned int
/* Can eventually relax perm check since server enforces too */
if (!capable(CAP_SYS_ADMIN))
rc = -EPERM;
- else {
+ else if (qi.output_buffer_length < 8)
+ rc = -EINVAL;
+ else {
rqst[1].rq_iov = &vars->si_iov[0];
rqst[1].rq_nvec = 1;
+ /* MS-FSCC 2.4.13 FileEndOfFileInformation */
size[0] = 8;
data[0] = buffer;
From: Tudor Ambarus <[email protected]>
commit 0fb578a529ac7aca326a9fa475b4a6f58a756fda upstream.
PMERRLOC resource size was set to 0x100, which resulted in HSMC_ERRLOCx
register being truncated to offset x = 21, causing error correction to
fail if more than 22 bit errors and if 24 or 32 bit error correction
was supported.
Fixes: d9c41bf30cf8 ("ARM: dts: at91: Declare EBI/NAND controllers")
Signed-off-by: Tudor Ambarus <[email protected]>
Cc: <[email protected]> # 4.13.x
Acked-by: Alexander Dahl <[email protected]>
Signed-off-by: Nicolas Ferre <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/boot/dts/sama5d2.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/sama5d2.dtsi
@@ -413,7 +413,7 @@
pmecc: ecc-engine@f8014070 {
compatible = "atmel,sama5d2-pmecc";
reg = <0xf8014070 0x490>,
- <0xf8014500 0x100>;
+ <0xf8014500 0x200>;
};
};
From: Lino Sanfilippo <[email protected]>
commit 7e0438f83dc769465ee663bb5dcf8cc154940712 upstream.
The following sequence of operations results in a refcount warning:
1. Open device /dev/tpmrm.
2. Remove module tpm_tis_spi.
3. Write a TPM command to the file descriptor opened at step 1.
------------[ cut here ]------------
WARNING: CPU: 3 PID: 1161 at lib/refcount.c:25 kobject_get+0xa0/0xa4
refcount_t: addition on 0; use-after-free.
Modules linked in: tpm_tis_spi tpm_tis_core tpm mdio_bcm_unimac brcmfmac
sha256_generic libsha256 sha256_arm hci_uart btbcm bluetooth cfg80211 vc4
brcmutil ecdh_generic ecc snd_soc_core crc32_arm_ce libaes
raspberrypi_hwmon ac97_bus snd_pcm_dmaengine bcm2711_thermal snd_pcm
snd_timer genet snd phy_generic soundcore [last unloaded: spi_bcm2835]
CPU: 3 PID: 1161 Comm: hold_open Not tainted 5.10.0ls-main-dirty #2
Hardware name: BCM2711
[<c0410c3c>] (unwind_backtrace) from [<c040b580>] (show_stack+0x10/0x14)
[<c040b580>] (show_stack) from [<c1092174>] (dump_stack+0xc4/0xd8)
[<c1092174>] (dump_stack) from [<c0445a30>] (__warn+0x104/0x108)
[<c0445a30>] (__warn) from [<c0445aa8>] (warn_slowpath_fmt+0x74/0xb8)
[<c0445aa8>] (warn_slowpath_fmt) from [<c08435d0>] (kobject_get+0xa0/0xa4)
[<c08435d0>] (kobject_get) from [<bf0a715c>] (tpm_try_get_ops+0x14/0x54 [tpm])
[<bf0a715c>] (tpm_try_get_ops [tpm]) from [<bf0a7d6c>] (tpm_common_write+0x38/0x60 [tpm])
[<bf0a7d6c>] (tpm_common_write [tpm]) from [<c05a7ac0>] (vfs_write+0xc4/0x3c0)
[<c05a7ac0>] (vfs_write) from [<c05a7ee4>] (ksys_write+0x58/0xcc)
[<c05a7ee4>] (ksys_write) from [<c04001a0>] (ret_fast_syscall+0x0/0x4c)
Exception stack(0xc226bfa8 to 0xc226bff0)
bfa0: 00000000 000105b4 00000003 beafe664 00000014 00000000
bfc0: 00000000 000105b4 000103f8 00000004 00000000 00000000 b6f9c000 beafe684
bfe0: 0000006c beafe648 0001056c b6eb6944
---[ end trace d4b8409def9b8b1f ]---
The reason for this warning is the attempt to get the chip->dev reference
in tpm_common_write() although the reference counter is already zero.
Since commit 8979b02aaf1d ("tpm: Fix reference count to main device") the
extra reference used to prevent a premature zero counter is never taken,
because the required TPM_CHIP_FLAG_TPM2 flag is never set.
Fix this by moving the TPM 2 character device handling from
tpm_chip_alloc() to tpm_add_char_device() which is called at a later point
in time when the flag has been set in case of TPM2.
Commit fdc915f7f719 ("tpm: expose spaces via a device link /dev/tpmrm<n>")
already introduced function tpm_devs_release() to release the extra
reference but did not implement the required put on chip->devs that results
in the call of this function.
Fix this by putting chip->devs in tpm_chip_unregister().
Finally move the new implementation for the TPM 2 handling into a new
function to avoid multiple checks for the TPM_CHIP_FLAG_TPM2 flag in the
good case and error cases.
Cc: [email protected]
Fixes: fdc915f7f719 ("tpm: expose spaces via a device link /dev/tpmrm<n>")
Fixes: 8979b02aaf1d ("tpm: Fix reference count to main device")
Co-developed-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Lino Sanfilippo <[email protected]>
Tested-by: Stefan Berger <[email protected]>
Reviewed-by: Jason Gunthorpe <[email protected]>
Reviewed-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/char/tpm/tpm-chip.c | 46 +++++------------------------
drivers/char/tpm/tpm.h | 2 +
drivers/char/tpm/tpm2-space.c | 65 ++++++++++++++++++++++++++++++++++++++++++
3 files changed, 75 insertions(+), 38 deletions(-)
--- a/drivers/char/tpm/tpm-chip.c
+++ b/drivers/char/tpm/tpm-chip.c
@@ -274,14 +274,6 @@ static void tpm_dev_release(struct devic
kfree(chip);
}
-static void tpm_devs_release(struct device *dev)
-{
- struct tpm_chip *chip = container_of(dev, struct tpm_chip, devs);
-
- /* release the master device reference */
- put_device(&chip->dev);
-}
-
/**
* tpm_class_shutdown() - prepare the TPM device for loss of power.
* @dev: device to which the chip is associated.
@@ -344,7 +336,6 @@ struct tpm_chip *tpm_chip_alloc(struct d
chip->dev_num = rc;
device_initialize(&chip->dev);
- device_initialize(&chip->devs);
chip->dev.class = tpm_class;
chip->dev.class->shutdown_pre = tpm_class_shutdown;
@@ -352,39 +343,20 @@ struct tpm_chip *tpm_chip_alloc(struct d
chip->dev.parent = pdev;
chip->dev.groups = chip->groups;
- chip->devs.parent = pdev;
- chip->devs.class = tpmrm_class;
- chip->devs.release = tpm_devs_release;
- /* get extra reference on main device to hold on
- * behalf of devs. This holds the chip structure
- * while cdevs is in use. The corresponding put
- * is in the tpm_devs_release (TPM2 only)
- */
- if (chip->flags & TPM_CHIP_FLAG_TPM2)
- get_device(&chip->dev);
-
if (chip->dev_num == 0)
chip->dev.devt = MKDEV(MISC_MAJOR, TPM_MINOR);
else
chip->dev.devt = MKDEV(MAJOR(tpm_devt), chip->dev_num);
- chip->devs.devt =
- MKDEV(MAJOR(tpm_devt), chip->dev_num + TPM_NUM_DEVICES);
-
rc = dev_set_name(&chip->dev, "tpm%d", chip->dev_num);
if (rc)
goto out;
- rc = dev_set_name(&chip->devs, "tpmrm%d", chip->dev_num);
- if (rc)
- goto out;
if (!pdev)
chip->flags |= TPM_CHIP_FLAG_VIRTUAL;
cdev_init(&chip->cdev, &tpm_fops);
- cdev_init(&chip->cdevs, &tpmrm_fops);
chip->cdev.owner = THIS_MODULE;
- chip->cdevs.owner = THIS_MODULE;
rc = tpm2_init_space(&chip->work_space, TPM2_SPACE_BUFFER_SIZE);
if (rc) {
@@ -396,7 +368,6 @@ struct tpm_chip *tpm_chip_alloc(struct d
return chip;
out:
- put_device(&chip->devs);
put_device(&chip->dev);
return ERR_PTR(rc);
}
@@ -445,14 +416,9 @@ static int tpm_add_char_device(struct tp
}
if (chip->flags & TPM_CHIP_FLAG_TPM2) {
- rc = cdev_device_add(&chip->cdevs, &chip->devs);
- if (rc) {
- dev_err(&chip->devs,
- "unable to cdev_device_add() %s, major %d, minor %d, err=%d\n",
- dev_name(&chip->devs), MAJOR(chip->devs.devt),
- MINOR(chip->devs.devt), rc);
- return rc;
- }
+ rc = tpm_devs_add(chip);
+ if (rc)
+ goto err_del_cdev;
}
/* Make the chip available. */
@@ -460,6 +426,10 @@ static int tpm_add_char_device(struct tp
idr_replace(&dev_nums_idr, chip, chip->dev_num);
mutex_unlock(&idr_lock);
+ return 0;
+
+err_del_cdev:
+ cdev_device_del(&chip->cdev, &chip->dev);
return rc;
}
@@ -641,7 +611,7 @@ void tpm_chip_unregister(struct tpm_chip
hwrng_unregister(&chip->hwrng);
tpm_bios_log_teardown(chip);
if (chip->flags & TPM_CHIP_FLAG_TPM2)
- cdev_device_del(&chip->cdevs, &chip->devs);
+ tpm_devs_remove(chip);
tpm_del_char_device(chip);
}
EXPORT_SYMBOL_GPL(tpm_chip_unregister);
--- a/drivers/char/tpm/tpm.h
+++ b/drivers/char/tpm/tpm.h
@@ -234,6 +234,8 @@ int tpm2_prepare_space(struct tpm_chip *
size_t cmdsiz);
int tpm2_commit_space(struct tpm_chip *chip, struct tpm_space *space, void *buf,
size_t *bufsiz);
+int tpm_devs_add(struct tpm_chip *chip);
+void tpm_devs_remove(struct tpm_chip *chip);
void tpm_bios_log_setup(struct tpm_chip *chip);
void tpm_bios_log_teardown(struct tpm_chip *chip);
--- a/drivers/char/tpm/tpm2-space.c
+++ b/drivers/char/tpm/tpm2-space.c
@@ -574,3 +574,68 @@ out:
dev_err(&chip->dev, "%s: error %d\n", __func__, rc);
return rc;
}
+
+/*
+ * Put the reference to the main device.
+ */
+static void tpm_devs_release(struct device *dev)
+{
+ struct tpm_chip *chip = container_of(dev, struct tpm_chip, devs);
+
+ /* release the master device reference */
+ put_device(&chip->dev);
+}
+
+/*
+ * Remove the device file for exposed TPM spaces and release the device
+ * reference. This may also release the reference to the master device.
+ */
+void tpm_devs_remove(struct tpm_chip *chip)
+{
+ cdev_device_del(&chip->cdevs, &chip->devs);
+ put_device(&chip->devs);
+}
+
+/*
+ * Add a device file to expose TPM spaces. Also take a reference to the
+ * main device.
+ */
+int tpm_devs_add(struct tpm_chip *chip)
+{
+ int rc;
+
+ device_initialize(&chip->devs);
+ chip->devs.parent = chip->dev.parent;
+ chip->devs.class = tpmrm_class;
+
+ /*
+ * Get extra reference on main device to hold on behalf of devs.
+ * This holds the chip structure while cdevs is in use. The
+ * corresponding put is in the tpm_devs_release.
+ */
+ get_device(&chip->dev);
+ chip->devs.release = tpm_devs_release;
+ chip->devs.devt = MKDEV(MAJOR(tpm_devt), chip->dev_num + TPM_NUM_DEVICES);
+ cdev_init(&chip->cdevs, &tpmrm_fops);
+ chip->cdevs.owner = THIS_MODULE;
+
+ rc = dev_set_name(&chip->devs, "tpmrm%d", chip->dev_num);
+ if (rc)
+ goto err_put_devs;
+
+ rc = cdev_device_add(&chip->cdevs, &chip->devs);
+ if (rc) {
+ dev_err(&chip->devs,
+ "unable to cdev_device_add() %s, major %d, minor %d, err=%d\n",
+ dev_name(&chip->devs), MAJOR(chip->devs.devt),
+ MINOR(chip->devs.devt), rc);
+ goto err_put_devs;
+ }
+
+ return 0;
+
+err_put_devs:
+ put_device(&chip->devs);
+
+ return rc;
+}
From: Wang Yufen <[email protected]>
[ Upstream commit 9c34e38c4a870eb30b13f42f5b44f42e9d19ccb8 ]
If tcp_bpf_sendmsg() is running while sk msg is full. When sk_msg_alloc()
returns -ENOMEM error, tcp_bpf_sendmsg() goes to wait_for_memory. If partial
memory has been alloced by sk_msg_alloc(), that is, msg_tx->sg.size is
greater than osize after sk_msg_alloc(), memleak occurs. To fix we use
sk_msg_trim() to release the allocated memory, then goto wait for memory.
Other call paths of sk_msg_alloc() have the similar issue, such as
tls_sw_sendmsg(), so handle sk_msg_trim logic inside sk_msg_alloc(),
as Cong Wang suggested.
This issue can cause the following info:
WARNING: CPU: 3 PID: 7950 at net/core/stream.c:208 sk_stream_kill_queues+0xd4/0x1a0
Call Trace:
<TASK>
inet_csk_destroy_sock+0x55/0x110
__tcp_close+0x279/0x470
tcp_close+0x1f/0x60
inet_release+0x3f/0x80
__sock_release+0x3d/0xb0
sock_close+0x11/0x20
__fput+0x92/0x250
task_work_run+0x6a/0xa0
do_exit+0x33b/0xb60
do_group_exit+0x2f/0xa0
get_signal+0xb6/0x950
arch_do_signal_or_restart+0xac/0x2a0
exit_to_user_mode_prepare+0xa9/0x200
syscall_exit_to_user_mode+0x12/0x30
do_syscall_64+0x46/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
</TASK>
WARNING: CPU: 3 PID: 2094 at net/ipv4/af_inet.c:155 inet_sock_destruct+0x13c/0x260
Call Trace:
<TASK>
__sk_destruct+0x24/0x1f0
sk_psock_destroy+0x19b/0x1c0
process_one_work+0x1b3/0x3c0
kthread+0xe6/0x110
ret_from_fork+0x22/0x30
</TASK>
Fixes: 604326b41a6f ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: Wang Yufen <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: John Fastabend <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
net/core/skmsg.c | 17 +++++++++++++----
1 file changed, 13 insertions(+), 4 deletions(-)
diff --git a/net/core/skmsg.c b/net/core/skmsg.c
index e4bb89599b44..545181a1ae04 100644
--- a/net/core/skmsg.c
+++ b/net/core/skmsg.c
@@ -27,6 +27,7 @@ int sk_msg_alloc(struct sock *sk, struct sk_msg *msg, int len,
int elem_first_coalesce)
{
struct page_frag *pfrag = sk_page_frag(sk);
+ u32 osize = msg->sg.size;
int ret = 0;
len -= msg->sg.size;
@@ -35,13 +36,17 @@ int sk_msg_alloc(struct sock *sk, struct sk_msg *msg, int len,
u32 orig_offset;
int use, i;
- if (!sk_page_frag_refill(sk, pfrag))
- return -ENOMEM;
+ if (!sk_page_frag_refill(sk, pfrag)) {
+ ret = -ENOMEM;
+ goto msg_trim;
+ }
orig_offset = pfrag->offset;
use = min_t(int, len, pfrag->size - orig_offset);
- if (!sk_wmem_schedule(sk, use))
- return -ENOMEM;
+ if (!sk_wmem_schedule(sk, use)) {
+ ret = -ENOMEM;
+ goto msg_trim;
+ }
i = msg->sg.end;
sk_msg_iter_var_prev(i);
@@ -71,6 +76,10 @@ int sk_msg_alloc(struct sock *sk, struct sk_msg *msg, int len,
}
return ret;
+
+msg_trim:
+ sk_msg_trim(sk, msg, osize);
+ return ret;
}
EXPORT_SYMBOL_GPL(sk_msg_alloc);
--
2.34.1
From: Jiasheng Jiang <[email protected]>
[ Upstream commit 6dee930f6f6776d1e5a7edf542c6863b47d9f078 ]
In free_charger_irq(), there is no free for 'WM8350_IRQ_CHG_FAST_RDY'.
Therefore, it should be better to add it in order to avoid the memory leak.
Fixes: 14431aa0c5a4 ("power_supply: Add support for WM8350 PMU")
Signed-off-by: Jiasheng Jiang <[email protected]>
Acked-by: Charles Keepax <[email protected]>
Signed-off-by: Sebastian Reichel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/power/supply/wm8350_power.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/power/supply/wm8350_power.c b/drivers/power/supply/wm8350_power.c
index 9c46c48dccb1..908cfd45d262 100644
--- a/drivers/power/supply/wm8350_power.c
+++ b/drivers/power/supply/wm8350_power.c
@@ -524,6 +524,7 @@ static void free_charger_irq(struct wm8350 *wm8350)
wm8350_free_irq(wm8350, WM8350_IRQ_CHG_TO, wm8350);
wm8350_free_irq(wm8350, WM8350_IRQ_CHG_END, wm8350);
wm8350_free_irq(wm8350, WM8350_IRQ_CHG_START, wm8350);
+ wm8350_free_irq(wm8350, WM8350_IRQ_CHG_FAST_RDY, wm8350);
wm8350_free_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P9, wm8350);
wm8350_free_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P1, wm8350);
wm8350_free_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_2P85, wm8350);
--
2.34.1
From: Linus Walleij <[email protected]>
[ Upstream commit e941dc13fd3717122207d74539ab95da07ef797f ]
I observed the following problem with the BT404 touch pad
running the Phosh UI:
When e.g. typing on the virtual keyboard pressing "g" would
produce "ggg".
After some analysis it turns out the firmware reports that three
fingers hit that coordinate at the same time, finger 0, 2 and
4 (of the five available 0,1,2,3,4).
DOWN
Zinitix-TS 3-0020: finger 0 down (246, 395)
Zinitix-TS 3-0020: finger 1 up (0, 0)
Zinitix-TS 3-0020: finger 2 down (246, 395)
Zinitix-TS 3-0020: finger 3 up (0, 0)
Zinitix-TS 3-0020: finger 4 down (246, 395)
UP
Zinitix-TS 3-0020: finger 0 up (246, 395)
Zinitix-TS 3-0020: finger 2 up (246, 395)
Zinitix-TS 3-0020: finger 4 up (246, 395)
This is one touch and release: i.e. this is all reported on
touch (down) and release.
There is a field in the struct touch_event called finger_cnt
which is actually a bitmask of the fingers active in the
event.
Rename this field finger_mask as this matches the use contents
better, then use for_each_set_bit() to iterate over just the
fingers that are actally active.
Factor out a finger reporting function zinitix_report_fingers()
to handle all fingers.
Also be more careful in reporting finger down/up: we were
reporting every event with input_mt_report_slot_state(..., true);
but this should only be reported on finger down or move,
not on finger up, so also add code to check p->sub_status
to see what is happening and report correctly.
After this my Zinitix BT404 touchscreen report fingers
flawlessly.
The vendor drive I have notably does not use the "finger_cnt"
and contains obviously incorrect code like this:
if (touch_dev->touch_info.finger_cnt > MAX_SUPPORTED_FINGER_NUM)
touch_dev->touch_info.finger_cnt = MAX_SUPPORTED_FINGER_NUM;
As MAX_SUPPORTED_FINGER_NUM is an ordinal and the field is
a bitmask this seems quite confused.
Signed-off-by: Linus Walleij <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/input/touchscreen/zinitix.c | 44 +++++++++++++++++++++++------
1 file changed, 35 insertions(+), 9 deletions(-)
diff --git a/drivers/input/touchscreen/zinitix.c b/drivers/input/touchscreen/zinitix.c
index 6df6f07f1ac6..17b10b81c713 100644
--- a/drivers/input/touchscreen/zinitix.c
+++ b/drivers/input/touchscreen/zinitix.c
@@ -135,7 +135,7 @@ struct point_coord {
struct touch_event {
__le16 status;
- u8 finger_cnt;
+ u8 finger_mask;
u8 time_stamp;
struct point_coord point_coord[MAX_SUPPORTED_FINGER_NUM];
};
@@ -311,11 +311,32 @@ static int zinitix_send_power_on_sequence(struct bt541_ts_data *bt541)
static void zinitix_report_finger(struct bt541_ts_data *bt541, int slot,
const struct point_coord *p)
{
+ u16 x, y;
+
+ if (unlikely(!(p->sub_status &
+ (SUB_BIT_UP | SUB_BIT_DOWN | SUB_BIT_MOVE)))) {
+ dev_dbg(&bt541->client->dev, "unknown finger event %#02x\n",
+ p->sub_status);
+ return;
+ }
+
+ x = le16_to_cpu(p->x);
+ y = le16_to_cpu(p->y);
+
input_mt_slot(bt541->input_dev, slot);
- input_mt_report_slot_state(bt541->input_dev, MT_TOOL_FINGER, true);
- touchscreen_report_pos(bt541->input_dev, &bt541->prop,
- le16_to_cpu(p->x), le16_to_cpu(p->y), true);
- input_report_abs(bt541->input_dev, ABS_MT_TOUCH_MAJOR, p->width);
+ if (input_mt_report_slot_state(bt541->input_dev, MT_TOOL_FINGER,
+ !(p->sub_status & SUB_BIT_UP))) {
+ touchscreen_report_pos(bt541->input_dev,
+ &bt541->prop, x, y, true);
+ input_report_abs(bt541->input_dev,
+ ABS_MT_TOUCH_MAJOR, p->width);
+ dev_dbg(&bt541->client->dev, "finger %d %s (%u, %u)\n",
+ slot, p->sub_status & SUB_BIT_DOWN ? "down" : "move",
+ x, y);
+ } else {
+ dev_dbg(&bt541->client->dev, "finger %d up (%u, %u)\n",
+ slot, x, y);
+ }
}
static irqreturn_t zinitix_ts_irq_handler(int irq, void *bt541_handler)
@@ -323,6 +344,7 @@ static irqreturn_t zinitix_ts_irq_handler(int irq, void *bt541_handler)
struct bt541_ts_data *bt541 = bt541_handler;
struct i2c_client *client = bt541->client;
struct touch_event touch_event;
+ unsigned long finger_mask;
int error;
int i;
@@ -335,10 +357,14 @@ static irqreturn_t zinitix_ts_irq_handler(int irq, void *bt541_handler)
goto out;
}
- for (i = 0; i < MAX_SUPPORTED_FINGER_NUM; i++)
- if (touch_event.point_coord[i].sub_status & SUB_BIT_EXIST)
- zinitix_report_finger(bt541, i,
- &touch_event.point_coord[i]);
+ finger_mask = touch_event.finger_mask;
+ for_each_set_bit(i, &finger_mask, MAX_SUPPORTED_FINGER_NUM) {
+ const struct point_coord *p = &touch_event.point_coord[i];
+
+ /* Only process contacts that are actually reported */
+ if (p->sub_status & SUB_BIT_EXIST)
+ zinitix_report_finger(bt541, i, p);
+ }
input_mt_sync_frame(bt541->input_dev);
input_sync(bt541->input_dev);
--
2.34.1
From: Zhihao Cheng <[email protected]>
commit afd427048047e8efdedab30e8888044e2be5aa9c upstream.
Following hung tasks:
[ 77.028764] task:kworker/u8:4 state:D stack: 0 pid: 132
[ 77.028820] Call Trace:
[ 77.029027] schedule+0x8c/0x1b0
[ 77.029067] mutex_lock+0x50/0x60
[ 77.029074] ubifs_write_inode+0x68/0x1f0 [ubifs]
[ 77.029117] __writeback_single_inode+0x43c/0x570
[ 77.029128] writeback_sb_inodes+0x259/0x740
[ 77.029148] wb_writeback+0x107/0x4d0
[ 77.029163] wb_workfn+0x162/0x7b0
[ 92.390442] task:aa state:D stack: 0 pid: 1506
[ 92.390448] Call Trace:
[ 92.390458] schedule+0x8c/0x1b0
[ 92.390461] wb_wait_for_completion+0x82/0xd0
[ 92.390469] __writeback_inodes_sb_nr+0xb2/0x110
[ 92.390472] writeback_inodes_sb_nr+0x14/0x20
[ 92.390476] ubifs_budget_space+0x705/0xdd0 [ubifs]
[ 92.390503] do_rename.cold+0x7f/0x187 [ubifs]
[ 92.390549] ubifs_rename+0x8b/0x180 [ubifs]
[ 92.390571] vfs_rename+0xdb2/0x1170
[ 92.390580] do_renameat2+0x554/0x770
, are caused by concurrent rename whiteout and inode writeback processes:
rename_whiteout(Thread 1) wb_workfn(Thread2)
ubifs_rename
do_rename
lock_4_inodes (Hold ui_mutex)
ubifs_budget_space
make_free_space
shrink_liability
__writeback_inodes_sb_nr
bdi_split_work_to_wbs (Queue new wb work)
wb_do_writeback(wb work)
__writeback_single_inode
ubifs_write_inode
LOCK(ui_mutex)
↑
wb_wait_for_completion (Wait wb work) <-- deadlock!
Reproducer (Detail program in [Link]):
1. SYS_renameat2("/mp/dir/file", "/mp/dir/whiteout", RENAME_WHITEOUT)
2. Consume out of space before kernel(mdelay) doing budget for whiteout
Fix it by doing whiteout space budget before locking ubifs inodes.
BTW, it also fixes wrong goto tag 'out_release' in whiteout budget
error handling path(It should at least recover dir i_size and unlock
4 ubifs inodes).
Fixes: 9e0a1fff8db56ea ("ubifs: Implement RENAME_WHITEOUT")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=214733
Signed-off-by: Zhihao Cheng <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ubifs/dir.c | 25 +++++++++++++++----------
1 file changed, 15 insertions(+), 10 deletions(-)
--- a/fs/ubifs/dir.c
+++ b/fs/ubifs/dir.c
@@ -1322,6 +1322,7 @@ static int do_rename(struct inode *old_d
if (flags & RENAME_WHITEOUT) {
union ubifs_dev_desc *dev = NULL;
+ struct ubifs_budget_req wht_req;
dev = kmalloc(sizeof(union ubifs_dev_desc), GFP_NOFS);
if (!dev) {
@@ -1343,6 +1344,20 @@ static int do_rename(struct inode *old_d
whiteout_ui->data = dev;
whiteout_ui->data_len = ubifs_encode_dev(dev, MKDEV(0, 0));
ubifs_assert(c, !whiteout_ui->dirty);
+
+ memset(&wht_req, 0, sizeof(struct ubifs_budget_req));
+ wht_req.dirtied_ino = 1;
+ wht_req.dirtied_ino_d = ALIGN(whiteout_ui->data_len, 8);
+ /*
+ * To avoid deadlock between space budget (holds ui_mutex and
+ * waits wb work) and writeback work(waits ui_mutex), do space
+ * budget before ubifs inodes locked.
+ */
+ err = ubifs_budget_space(c, &wht_req);
+ if (err) {
+ iput(whiteout);
+ goto out_release;
+ }
}
lock_4_inodes(old_dir, new_dir, new_inode, whiteout);
@@ -1417,16 +1432,6 @@ static int do_rename(struct inode *old_d
}
if (whiteout) {
- struct ubifs_budget_req wht_req = { .dirtied_ino = 1,
- .dirtied_ino_d = \
- ALIGN(ubifs_inode(whiteout)->data_len, 8) };
-
- err = ubifs_budget_space(c, &wht_req);
- if (err) {
- iput(whiteout);
- goto out_release;
- }
-
inc_nlink(whiteout);
mark_inode_dirty(whiteout);
From: Mike Marciniszyn <[email protected]>
[ Upstream commit b135e324d7a2e7fa0a7ef925076136e799b79f44 ]
The AIP code signals the phys_mtu in the following query_port()
fragment:
props->phys_mtu = HFI1_CAP_IS_KSET(AIP) ? hfi1_max_mtu :
ib_mtu_enum_to_int(props->max_mtu);
Using the largest MTU possible should not depend on AIP.
Fix by unconditionally using the hfi1_max_mtu value.
Fixes: 6d72344cf6c4 ("IB/ipoib: Increase ipoib Datagram mode MTU's upper limit")
Link: https://lore.kernel.org/r/1644348309-174874-1-git-send-email-mike.marciniszyn@cornelisnetworks.com
Reviewed-by: Dennis Dalessandro <[email protected]>
Signed-off-by: Mike Marciniszyn <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/hw/hfi1/verbs.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/infiniband/hw/hfi1/verbs.c b/drivers/infiniband/hw/hfi1/verbs.c
index 3591923abebb..5f3edd255ca3 100644
--- a/drivers/infiniband/hw/hfi1/verbs.c
+++ b/drivers/infiniband/hw/hfi1/verbs.c
@@ -1439,8 +1439,7 @@ static int query_port(struct rvt_dev_info *rdi, u8 port_num,
4096 : hfi1_max_mtu), IB_MTU_4096);
props->active_mtu = !valid_ib_mtu(ppd->ibmtu) ? props->max_mtu :
mtu_to_enum(ppd->ibmtu, IB_MTU_4096);
- props->phys_mtu = HFI1_CAP_IS_KSET(AIP) ? hfi1_max_mtu :
- ib_mtu_enum_to_int(props->max_mtu);
+ props->phys_mtu = hfi1_max_mtu;
return 0;
}
--
2.34.1
From: Krzysztof Kozlowski <[email protected]>
[ Upstream commit ab8da93dc06d82f464c47ab30e6c75190702f369 ]
The driver statically defines maximum number of interrupts it can
handle, however it does not respect that limit when configuring them.
When provided with a DTS with more interrupts than assumed, the driver
will overwrite static array mct_irqs leading to silent memory
corruption.
Validate the interrupts coming from DTS to avoid this. This does not
change the fact that such DTS might not boot at all, because it is
simply incompatible, however at least some warning will be printed.
Fixes: 36ba5d527e95 ("ARM: EXYNOS: add device tree support for MCT controller driver")
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Alim Akhtar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Daniel Lezcano <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clocksource/exynos_mct.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/drivers/clocksource/exynos_mct.c b/drivers/clocksource/exynos_mct.c
index 5533c9afc088..df194b05e944 100644
--- a/drivers/clocksource/exynos_mct.c
+++ b/drivers/clocksource/exynos_mct.c
@@ -531,6 +531,11 @@ static int __init exynos4_timer_interrupts(struct device_node *np,
* irqs are specified.
*/
nr_irqs = of_irq_count(np);
+ if (nr_irqs > ARRAY_SIZE(mct_irqs)) {
+ pr_err("exynos-mct: too many (%d) interrupts configured in DT\n",
+ nr_irqs);
+ nr_irqs = ARRAY_SIZE(mct_irqs);
+ }
for (i = MCT_L0_IRQ; i < nr_irqs; i++)
mct_irqs[i] = irq_of_parse_and_map(np, i);
@@ -543,11 +548,14 @@ static int __init exynos4_timer_interrupts(struct device_node *np,
mct_irqs[MCT_L0_IRQ], err);
} else {
for_each_possible_cpu(cpu) {
- int mct_irq = mct_irqs[MCT_L0_IRQ + cpu];
+ int mct_irq;
struct mct_clock_event_device *pcpu_mevt =
per_cpu_ptr(&percpu_mct_tick, cpu);
pcpu_mevt->evt.irq = -1;
+ if (MCT_L0_IRQ + cpu >= ARRAY_SIZE(mct_irqs))
+ break;
+ mct_irq = mct_irqs[MCT_L0_IRQ + cpu];
irq_set_status_flags(mct_irq, IRQ_NOAUTOEN);
if (request_irq(mct_irq,
--
2.34.1
From: Damien Le Moal <[email protected]>
[ Upstream commit 970404cc5744b1033b6ee601be4ef0e2d1fbcf72 ]
Make sure that the __le32 fields of struct ssp_ini_io_start_req are
manipulated after applying the correct endian conversion. That is, use
cpu_to_le32() for assigning values and le32_to_cpu() for consulting a field
value. In particular, make sure that the calculations for the 4G boundary
check are done using CPU endianness and *not* little endian values. With
these fixes, many sparse warnings are removed.
While at it, add blank lines after variable declarations and in some other
places to make this code more readable.
Link: https://lore.kernel.org/r/[email protected]
Fixes: 0ecdf00ba6e5 ("[SCSI] pm80xx: 4G boundary fix.")
Reviewed-by: Jack Wang <[email protected]>
Signed-off-by: Damien Le Moal <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/pm8001/pm80xx_hwi.c | 41 +++++++++++++++++++-------------
1 file changed, 25 insertions(+), 16 deletions(-)
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c
index ac6334f8d791..33b5172d55cf 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.c
+++ b/drivers/scsi/pm8001/pm80xx_hwi.c
@@ -4308,13 +4308,15 @@ static int pm80xx_chip_ssp_io_req(struct pm8001_hba_info *pm8001_ha,
struct ssp_ini_io_start_req ssp_cmd;
u32 tag = ccb->ccb_tag;
int ret;
- u64 phys_addr, start_addr, end_addr;
+ u64 phys_addr, end_addr;
u32 end_addr_high, end_addr_low;
struct inbound_queue_table *circularQ;
u32 q_index, cpu_id;
u32 opc = OPC_INB_SSPINIIOSTART;
+
memset(&ssp_cmd, 0, sizeof(ssp_cmd));
memcpy(ssp_cmd.ssp_iu.lun, task->ssp_task.LUN, 8);
+
/* data address domain added for spcv; set to 0 by host,
* used internally by controller
* 0 for SAS 1.1 and SAS 2.0 compatible TLR
@@ -4325,7 +4327,7 @@ static int pm80xx_chip_ssp_io_req(struct pm8001_hba_info *pm8001_ha,
ssp_cmd.device_id = cpu_to_le32(pm8001_dev->device_id);
ssp_cmd.tag = cpu_to_le32(tag);
if (task->ssp_task.enable_first_burst)
- ssp_cmd.ssp_iu.efb_prio_attr |= 0x80;
+ ssp_cmd.ssp_iu.efb_prio_attr = 0x80;
ssp_cmd.ssp_iu.efb_prio_attr |= (task->ssp_task.task_prio << 3);
ssp_cmd.ssp_iu.efb_prio_attr |= (task->ssp_task.task_attr & 7);
memcpy(ssp_cmd.ssp_iu.cdb, task->ssp_task.cmd->cmnd,
@@ -4357,21 +4359,24 @@ static int pm80xx_chip_ssp_io_req(struct pm8001_hba_info *pm8001_ha,
ssp_cmd.enc_esgl = cpu_to_le32(1<<31);
} else if (task->num_scatter == 1) {
u64 dma_addr = sg_dma_address(task->scatter);
+
ssp_cmd.enc_addr_low =
cpu_to_le32(lower_32_bits(dma_addr));
ssp_cmd.enc_addr_high =
cpu_to_le32(upper_32_bits(dma_addr));
ssp_cmd.enc_len = cpu_to_le32(task->total_xfer_len);
ssp_cmd.enc_esgl = 0;
+
/* Check 4G Boundary */
- start_addr = cpu_to_le64(dma_addr);
- end_addr = (start_addr + ssp_cmd.enc_len) - 1;
- end_addr_low = cpu_to_le32(lower_32_bits(end_addr));
- end_addr_high = cpu_to_le32(upper_32_bits(end_addr));
- if (end_addr_high != ssp_cmd.enc_addr_high) {
+ end_addr = dma_addr + le32_to_cpu(ssp_cmd.enc_len) - 1;
+ end_addr_low = lower_32_bits(end_addr);
+ end_addr_high = upper_32_bits(end_addr);
+
+ if (end_addr_high != le32_to_cpu(ssp_cmd.enc_addr_high)) {
pm8001_dbg(pm8001_ha, FAIL,
"The sg list address start_addr=0x%016llx data_len=0x%x end_addr_high=0x%08x end_addr_low=0x%08x has crossed 4G boundary\n",
- start_addr, ssp_cmd.enc_len,
+ dma_addr,
+ le32_to_cpu(ssp_cmd.enc_len),
end_addr_high, end_addr_low);
pm8001_chip_make_sg(task->scatter, 1,
ccb->buf_prd);
@@ -4380,7 +4385,7 @@ static int pm80xx_chip_ssp_io_req(struct pm8001_hba_info *pm8001_ha,
cpu_to_le32(lower_32_bits(phys_addr));
ssp_cmd.enc_addr_high =
cpu_to_le32(upper_32_bits(phys_addr));
- ssp_cmd.enc_esgl = cpu_to_le32(1<<31);
+ ssp_cmd.enc_esgl = cpu_to_le32(1U<<31);
}
} else if (task->num_scatter == 0) {
ssp_cmd.enc_addr_low = 0;
@@ -4388,8 +4393,10 @@ static int pm80xx_chip_ssp_io_req(struct pm8001_hba_info *pm8001_ha,
ssp_cmd.enc_len = cpu_to_le32(task->total_xfer_len);
ssp_cmd.enc_esgl = 0;
}
+
/* XTS mode. All other fields are 0 */
- ssp_cmd.key_cmode = 0x6 << 4;
+ ssp_cmd.key_cmode = cpu_to_le32(0x6 << 4);
+
/* set tweak values. Should be the start lba */
ssp_cmd.twk_val0 = cpu_to_le32((task->ssp_task.cmd->cmnd[2] << 24) |
(task->ssp_task.cmd->cmnd[3] << 16) |
@@ -4411,20 +4418,22 @@ static int pm80xx_chip_ssp_io_req(struct pm8001_hba_info *pm8001_ha,
ssp_cmd.esgl = cpu_to_le32(1<<31);
} else if (task->num_scatter == 1) {
u64 dma_addr = sg_dma_address(task->scatter);
+
ssp_cmd.addr_low = cpu_to_le32(lower_32_bits(dma_addr));
ssp_cmd.addr_high =
cpu_to_le32(upper_32_bits(dma_addr));
ssp_cmd.len = cpu_to_le32(task->total_xfer_len);
ssp_cmd.esgl = 0;
+
/* Check 4G Boundary */
- start_addr = cpu_to_le64(dma_addr);
- end_addr = (start_addr + ssp_cmd.len) - 1;
- end_addr_low = cpu_to_le32(lower_32_bits(end_addr));
- end_addr_high = cpu_to_le32(upper_32_bits(end_addr));
- if (end_addr_high != ssp_cmd.addr_high) {
+ end_addr = dma_addr + le32_to_cpu(ssp_cmd.len) - 1;
+ end_addr_low = lower_32_bits(end_addr);
+ end_addr_high = upper_32_bits(end_addr);
+ if (end_addr_high != le32_to_cpu(ssp_cmd.addr_high)) {
pm8001_dbg(pm8001_ha, FAIL,
"The sg list address start_addr=0x%016llx data_len=0x%x end_addr_high=0x%08x end_addr_low=0x%08x has crossed 4G boundary\n",
- start_addr, ssp_cmd.len,
+ dma_addr,
+ le32_to_cpu(ssp_cmd.len),
end_addr_high, end_addr_low);
pm8001_chip_make_sg(task->scatter, 1,
ccb->buf_prd);
--
2.34.1
From: Robin Gong <[email protected]>
commit 892cb524ae8a27bf5e42f711318371acd9a9f74a upstream.
Since IRQF_NO_SUSPEND used for imx mailbox driver, that means this irq
can't be used for wakeup source so that can't wakeup from freeze mode.
Add pm_system_wakeup() to wakeup from freeze mode.
Fixes: b7b2796b9b31e("mailbox: imx: ONLY IPC MU needs IRQF_NO_SUSPEND flag")
Reviewed-by: Jacky Bai <[email protected]>
Reviewed-by: Peng Fan <[email protected]>
Signed-off-by: Robin Gong <[email protected]>
Signed-off-by: Peng Fan <[email protected]>
Signed-off-by: Jassi Brar <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mailbox/imx-mailbox.c | 9 +++++++++
1 file changed, 9 insertions(+)
--- a/drivers/mailbox/imx-mailbox.c
+++ b/drivers/mailbox/imx-mailbox.c
@@ -13,6 +13,7 @@
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/pm_runtime.h>
+#include <linux/suspend.h>
#include <linux/slab.h>
#define IMX_MU_xSR_GIPn(x) BIT(28 + (3 - (x)))
@@ -66,6 +67,7 @@ struct imx_mu_priv {
const struct imx_mu_dcfg *dcfg;
struct clk *clk;
int irq;
+ bool suspend;
u32 xcr;
@@ -277,6 +279,9 @@ static irqreturn_t imx_mu_isr(int irq, v
return IRQ_NONE;
}
+ if (priv->suspend)
+ pm_system_wakeup();
+
return IRQ_HANDLED;
}
@@ -326,6 +331,8 @@ static int imx_mu_startup(struct mbox_ch
break;
}
+ priv->suspend = true;
+
return 0;
}
@@ -543,6 +550,8 @@ static int imx_mu_probe(struct platform_
clk_disable_unprepare(priv->clk);
+ priv->suspend = false;
+
return 0;
disable_runtime_pm:
From: Ranjani Sridharan <[email protected]>
[ Upstream commit 2ce0d008dcc59f9c01f43277b9f9743af7b01dad ]
The limitation to assign a link DMA channel for a BE iff the
corresponding host DMA channel is assigned to a connected FE is only
applicable if the PROCEN_FMT_QUIRK is set. So, remove it for platforms
that do not enable the quirk.
Complements: a792bfc1c2bc ("ASoC: SOF: Intel: hda-stream: limit PROCEN workaround")
Signed-off-by: Ranjani Sridharan <[email protected]>
Reviewed-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Rander Wang <[email protected]>
Reviewed-by: Kai Vehmanen <[email protected]>
Reviewed-by: Peter Ujfalusi <[email protected]>
Signed-off-by: Peter Ujfalusi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/sof/intel/hda-dai.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/sound/soc/sof/intel/hda-dai.c b/sound/soc/sof/intel/hda-dai.c
index ef316311e959..99e62cb3a051 100644
--- a/sound/soc/sof/intel/hda-dai.c
+++ b/sound/soc/sof/intel/hda-dai.c
@@ -58,6 +58,8 @@ static struct hdac_ext_stream *
{
struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream);
struct sof_intel_hda_stream *hda_stream;
+ const struct sof_intel_dsp_desc *chip;
+ struct snd_sof_dev *sdev;
struct hdac_ext_stream *res = NULL;
struct hdac_stream *stream = NULL;
@@ -76,9 +78,20 @@ static struct hdac_ext_stream *
continue;
hda_stream = hstream_to_sof_hda_stream(hstream);
+ sdev = hda_stream->sdev;
+ chip = get_chip_info(sdev->pdata);
/* check if link is available */
if (!hstream->link_locked) {
+ /*
+ * choose the first available link for platforms that do not have the
+ * PROCEN_FMT_QUIRK set.
+ */
+ if (!(chip->quirks & SOF_INTEL_PROCEN_FMT_QUIRK)) {
+ res = hstream;
+ break;
+ }
+
if (stream->opened) {
/*
* check if the stream tag matches the stream
--
2.34.1
From: Liam Beguin <[email protected]>
commit 14b457fdde38de594a4bc4bd9075019319d978da upstream.
When a consumer calls iio_read_channel_processed() and no channel scale
is available, it's assumed that the scale is one and the raw value is
returned as expected.
On the other hand, if the consumer calls iio_convert_raw_to_processed()
the scaling factor requested by the consumer is not applied.
This for example causes the consumer to process mV when expecting uV.
Make sure to always apply the scaling factor requested by the consumer.
Fixes: adc8ec5ff183 ("iio: inkern: pass through raw values if no scaling")
Signed-off-by: Liam Beguin <[email protected]>
Reviewed-by: Peter Rosin <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/iio/inkern.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/iio/inkern.c
+++ b/drivers/iio/inkern.c
@@ -573,10 +573,10 @@ static int iio_convert_raw_to_processed_
IIO_CHAN_INFO_SCALE);
if (scale_type < 0) {
/*
- * Just pass raw values as processed if no scaling is
- * available.
+ * If no channel scaling is available apply consumer scale to
+ * raw value and return.
*/
- *processed = raw;
+ *processed = raw * scale;
return 0;
}
From: Jiasheng Jiang <[email protected]>
[ Upstream commit f9e2ca0640e59d19af0ff285ee5591ed39069b09 ]
As the potential failure of the clk_enable(),
it should be better to check it and return error if fals.
Fixes: cbaadf0f90d6 ("ASoC: atmel_ssc_dai: refactor the startup and shutdown")
Signed-off-by: Jiasheng Jiang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/atmel/atmel_ssc_dai.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/sound/soc/atmel/atmel_ssc_dai.c b/sound/soc/atmel/atmel_ssc_dai.c
index 6a63e8797a0b..97533412ce11 100644
--- a/sound/soc/atmel/atmel_ssc_dai.c
+++ b/sound/soc/atmel/atmel_ssc_dai.c
@@ -280,7 +280,10 @@ static int atmel_ssc_startup(struct snd_pcm_substream *substream,
/* Enable PMC peripheral clock for this SSC */
pr_debug("atmel_ssc_dai: Starting clock\n");
- clk_enable(ssc_p->ssc->clk);
+ ret = clk_enable(ssc_p->ssc->clk);
+ if (ret)
+ return ret;
+
ssc_p->mck_rate = clk_get_rate(ssc_p->ssc->clk);
/* Reset the SSC unless initialized to keep it in a clean state */
--
2.34.1
From: Dave Stevenson <[email protected]>
[ Upstream commit 5665eee7a3800430e7dc3ef6f25722476b603186 ]
The Atmel is doing some things in the I2C ISR, during which
period it will not respond to further commands. This is
particularly true of the POWERON command.
Increase delays appropriately, and retry should I2C errors be
reported.
Signed-off-by: Dave Stevenson <[email protected]>
Signed-off-by: Detlev Casanova <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../regulator/rpi-panel-attiny-regulator.c | 56 +++++++++++++++----
1 file changed, 46 insertions(+), 10 deletions(-)
diff --git a/drivers/regulator/rpi-panel-attiny-regulator.c b/drivers/regulator/rpi-panel-attiny-regulator.c
index ee46bfbf5eee..991b4730d768 100644
--- a/drivers/regulator/rpi-panel-attiny-regulator.c
+++ b/drivers/regulator/rpi-panel-attiny-regulator.c
@@ -37,11 +37,24 @@ static const struct regmap_config attiny_regmap_config = {
static int attiny_lcd_power_enable(struct regulator_dev *rdev)
{
unsigned int data;
+ int ret, i;
regmap_write(rdev->regmap, REG_POWERON, 1);
+ msleep(80);
+
/* Wait for nPWRDWN to go low to indicate poweron is done. */
- regmap_read_poll_timeout(rdev->regmap, REG_PORTB, data,
- data & BIT(0), 10, 1000000);
+ for (i = 0; i < 20; i++) {
+ ret = regmap_read(rdev->regmap, REG_PORTB, &data);
+ if (!ret) {
+ if (data & BIT(0))
+ break;
+ }
+ usleep_range(10000, 12000);
+ }
+ usleep_range(10000, 12000);
+
+ if (ret)
+ pr_err("%s: regmap_read_poll_timeout failed %d\n", __func__, ret);
/* Default to the same orientation as the closed source
* firmware used for the panel. Runtime rotation
@@ -57,23 +70,34 @@ static int attiny_lcd_power_disable(struct regulator_dev *rdev)
{
regmap_write(rdev->regmap, REG_PWM, 0);
regmap_write(rdev->regmap, REG_POWERON, 0);
- udelay(1);
+ msleep(30);
return 0;
}
static int attiny_lcd_power_is_enabled(struct regulator_dev *rdev)
{
unsigned int data;
- int ret;
+ int ret, i;
- ret = regmap_read(rdev->regmap, REG_POWERON, &data);
+ for (i = 0; i < 10; i++) {
+ ret = regmap_read(rdev->regmap, REG_POWERON, &data);
+ if (!ret)
+ break;
+ usleep_range(10000, 12000);
+ }
if (ret < 0)
return ret;
if (!(data & BIT(0)))
return 0;
- ret = regmap_read(rdev->regmap, REG_PORTB, &data);
+ for (i = 0; i < 10; i++) {
+ ret = regmap_read(rdev->regmap, REG_PORTB, &data);
+ if (!ret)
+ break;
+ usleep_range(10000, 12000);
+ }
+
if (ret < 0)
return ret;
@@ -103,20 +127,32 @@ static int attiny_update_status(struct backlight_device *bl)
{
struct regmap *regmap = bl_get_data(bl);
int brightness = bl->props.brightness;
+ int ret, i;
if (bl->props.power != FB_BLANK_UNBLANK ||
bl->props.fb_blank != FB_BLANK_UNBLANK)
brightness = 0;
- return regmap_write(regmap, REG_PWM, brightness);
+ for (i = 0; i < 10; i++) {
+ ret = regmap_write(regmap, REG_PWM, brightness);
+ if (!ret)
+ break;
+ }
+
+ return ret;
}
static int attiny_get_brightness(struct backlight_device *bl)
{
struct regmap *regmap = bl_get_data(bl);
- int ret, brightness;
+ int ret, brightness, i;
+
+ for (i = 0; i < 10; i++) {
+ ret = regmap_read(regmap, REG_PWM, &brightness);
+ if (!ret)
+ break;
+ }
- ret = regmap_read(regmap, REG_PWM, &brightness);
if (ret)
return ret;
@@ -166,7 +202,7 @@ static int attiny_i2c_probe(struct i2c_client *i2c,
}
regmap_write(regmap, REG_POWERON, 0);
- mdelay(1);
+ msleep(30);
config.dev = &i2c->dev;
config.regmap = regmap;
--
2.34.1
From: Johan Hovold <[email protected]>
commit c4b9c570965f75d0d55e639747f1e5ccdad2fae0 upstream.
Add a new "simple" driver for certain Nokia phones, including Nokia 130
(RM-1035) which exposes two serial ports in "charging only" mode:
Bus 001 Device 009: ID 0421:069a Nokia Mobile Phones 130 [RM-1035] (Charging only)
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x0421 Nokia Mobile Phones
idProduct 0x069a 130 [RM-1035] (Charging only)
bcdDevice 1.00
iManufacturer 1 Nokia
iProduct 2 Nokia 130 (RM-1035)
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x0037
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Device Status: 0x0000
(Bus Powered)
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/serial/Kconfig | 1 +
drivers/usb/serial/usb-serial-simple.c | 7 +++++++
2 files changed, 8 insertions(+)
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -66,6 +66,7 @@ config USB_SERIAL_SIMPLE
- Libtransistor USB console
- a number of Motorola phones
- Motorola Tetra devices
+ - Nokia mobile phones
- Novatel Wireless GPS receivers
- Siemens USB/MPI adapter.
- ViVOtech ViVOpay USB device.
--- a/drivers/usb/serial/usb-serial-simple.c
+++ b/drivers/usb/serial/usb-serial-simple.c
@@ -91,6 +91,11 @@ DEVICE(moto_modem, MOTO_IDS);
{ USB_DEVICE(0x0cad, 0x9016) } /* TPG2200 */
DEVICE(motorola_tetra, MOTOROLA_TETRA_IDS);
+/* Nokia mobile phone driver */
+#define NOKIA_IDS() \
+ { USB_DEVICE(0x0421, 0x069a) } /* Nokia 130 (RM-1035) */
+DEVICE(nokia, NOKIA_IDS);
+
/* Novatel Wireless GPS driver */
#define NOVATEL_IDS() \
{ USB_DEVICE(0x09d7, 0x0100) } /* NovAtel FlexPack GPS */
@@ -123,6 +128,7 @@ static struct usb_serial_driver * const
&vivopay_device,
&moto_modem_device,
&motorola_tetra_device,
+ &nokia_device,
&novatel_gps_device,
&hp4x_device,
&suunto_device,
@@ -140,6 +146,7 @@ static const struct usb_device_id id_tab
VIVOPAY_IDS(),
MOTO_IDS(),
MOTOROLA_TETRA_IDS(),
+ NOKIA_IDS(),
NOVATEL_IDS(),
HP4X_IDS(),
SUUNTO_IDS(),
From: Mark Tomlinson <[email protected]>
[ Upstream commit 92c45b63ce22c8898aa41806e8d6692bcd577510 ]
For hardware that only supports 32-bit writes to PCI there is the
possibility of clearing RW1C (write-one-to-clear) bits. A rate-limited
messages was introduced by fb2659230120, but rate-limiting is not the best
choice here. Some devices may not show the warnings they should if another
device has just produced a bunch of warnings. Also, the number of messages
can be a nuisance on devices which are otherwise working fine.
Change the ratelimit to a single warning per bus. This ensures no bus is
'starved' of emitting a warning and also that there isn't a continuous
stream of warnings. It would be preferable to have a warning per device,
but the pci_dev structure is not available here, and a lookup from devfn
would be far too slow.
Suggested-by: Bjorn Helgaas <[email protected]>
Fixes: fb2659230120 ("PCI: Warn on possible RW1C corruption for sub-32 bit config writes")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Tomlinson <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Acked-by: Scott Branden <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pci/access.c | 9 ++++++---
include/linux/pci.h | 1 +
2 files changed, 7 insertions(+), 3 deletions(-)
diff --git a/drivers/pci/access.c b/drivers/pci/access.c
index 46935695cfb9..8d0d1f61c650 100644
--- a/drivers/pci/access.c
+++ b/drivers/pci/access.c
@@ -160,9 +160,12 @@ int pci_generic_config_write32(struct pci_bus *bus, unsigned int devfn,
* write happen to have any RW1C (write-one-to-clear) bits set, we
* just inadvertently cleared something we shouldn't have.
*/
- dev_warn_ratelimited(&bus->dev, "%d-byte config write to %04x:%02x:%02x.%d offset %#x may corrupt adjacent RW1C bits\n",
- size, pci_domain_nr(bus), bus->number,
- PCI_SLOT(devfn), PCI_FUNC(devfn), where);
+ if (!bus->unsafe_warn) {
+ dev_warn(&bus->dev, "%d-byte config write to %04x:%02x:%02x.%d offset %#x may corrupt adjacent RW1C bits\n",
+ size, pci_domain_nr(bus), bus->number,
+ PCI_SLOT(devfn), PCI_FUNC(devfn), where);
+ bus->unsafe_warn = 1;
+ }
mask = ~(((1 << (size * 8)) - 1) << ((where & 0x3) * 8));
tmp = readl(addr) & mask;
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 4519bd12643f..bc5a1150f072 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -638,6 +638,7 @@ struct pci_bus {
struct bin_attribute *legacy_io; /* Legacy I/O for this bus */
struct bin_attribute *legacy_mem; /* Legacy mem */
unsigned int is_added:1;
+ unsigned int unsafe_warn:1; /* warned about RW1C config write */
};
#define to_pci_bus(n) container_of(n, struct pci_bus, dev)
--
2.34.1
From: Marek Vasut <[email protected]>
[ Upstream commit 0c6f71176ea43d6f4003a4d57f7bb518c5ad6145 ]
The M53Menlo display unit uses an LVDS-to-DPI bridge, TI DS90CF364A.
Describe this bridge in DT, otherwise the DT incorrectly describes
DPI panel attached directly to LVDS source.
Fixes: 716be61d1869 ("ARM: dts: imx53: Add Menlosystems M53 board")
Signed-off-by: Marek Vasut <[email protected]>
Cc: Shawn Guo <[email protected]>
Cc: Fabio Estevam <[email protected]>
Cc: NXP Linux Team <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/imx53-m53menlo.dts | 29 ++++++++++++++++++++++++++--
1 file changed, 27 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/imx53-m53menlo.dts b/arch/arm/boot/dts/imx53-m53menlo.dts
index 4f88e96d81dd..d5c68d1ea707 100644
--- a/arch/arm/boot/dts/imx53-m53menlo.dts
+++ b/arch/arm/boot/dts/imx53-m53menlo.dts
@@ -53,6 +53,31 @@
};
};
+ lvds-decoder {
+ compatible = "ti,ds90cf364a", "lvds-decoder";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ lvds_decoder_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ lvds_decoder_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+ };
+
panel {
compatible = "edt,etm0700g0dh6";
pinctrl-0 = <&pinctrl_display_gpio>;
@@ -61,7 +86,7 @@
port {
panel_in: endpoint {
- remote-endpoint = <&lvds0_out>;
+ remote-endpoint = <&lvds_decoder_out>;
};
};
};
@@ -450,7 +475,7 @@
reg = <2>;
lvds0_out: endpoint {
- remote-endpoint = <&panel_in>;
+ remote-endpoint = <&lvds_decoder_in>;
};
};
};
--
2.34.1
From: David Gow <[email protected]>
[ Upstream commit 37fd83916da2e4cae03d350015c82a67b1b334c4 ]
The Google Coreboot implementation requires IOMEM functions
(memmremap, memunmap, devm_memremap), but does not specify this is its
Kconfig. This results in build errors when HAS_IOMEM is not set, such as
on some UML configurations:
/usr/bin/ld: drivers/firmware/google/coreboot_table.o: in function `coreboot_table_probe':
coreboot_table.c:(.text+0x311): undefined reference to `memremap'
/usr/bin/ld: coreboot_table.c:(.text+0x34e): undefined reference to `memunmap'
/usr/bin/ld: drivers/firmware/google/memconsole-coreboot.o: in function `memconsole_probe':
memconsole-coreboot.c:(.text+0x12d): undefined reference to `memremap'
/usr/bin/ld: memconsole-coreboot.c:(.text+0x17e): undefined reference to `devm_memremap'
/usr/bin/ld: memconsole-coreboot.c:(.text+0x191): undefined reference to `memunmap'
/usr/bin/ld: drivers/firmware/google/vpd.o: in function `vpd_section_destroy.isra.0':
vpd.c:(.text+0x300): undefined reference to `memunmap'
/usr/bin/ld: drivers/firmware/google/vpd.o: in function `vpd_section_init':
vpd.c:(.text+0x382): undefined reference to `memremap'
/usr/bin/ld: vpd.c:(.text+0x459): undefined reference to `memunmap'
/usr/bin/ld: drivers/firmware/google/vpd.o: in function `vpd_probe':
vpd.c:(.text+0x59d): undefined reference to `memremap'
/usr/bin/ld: vpd.c:(.text+0x5d3): undefined reference to `memunmap'
collect2: error: ld returned 1 exit status
Fixes: a28aad66da8b ("firmware: coreboot: Collapse platform drivers into bus core")
Acked-By: anton ivanov <[email protected]>
Acked-By: Julius Werner <[email protected]>
Signed-off-by: David Gow <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/firmware/google/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/firmware/google/Kconfig b/drivers/firmware/google/Kconfig
index 931544c9f63d..983e07dc022e 100644
--- a/drivers/firmware/google/Kconfig
+++ b/drivers/firmware/google/Kconfig
@@ -21,7 +21,7 @@ config GOOGLE_SMI
config GOOGLE_COREBOOT_TABLE
tristate "Coreboot Table Access"
- depends on ACPI || OF
+ depends on HAS_IOMEM && (ACPI || OF)
help
This option enables the coreboot_table module, which provides other
firmware modules access to the coreboot table. The coreboot table
--
2.34.1
From: Krzysztof Kozlowski <[email protected]>
commit 372d7027fed43c8570018e124cf78b89523a1f8e upstream.
The gpa1-4 pin was put twice in UART3 pin configuration of Exynos5250,
instead of proper pin gpa1-5.
Fixes: f8bfe2b050f3 ("ARM: dts: add pin state information in client nodes for Exynos5 platforms")
Cc: <[email protected]>
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Tested-by: Marek Szyprowski <[email protected]>
Reviewed-by: Alim Akhtar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/boot/dts/exynos5250-pinctrl.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
@@ -260,7 +260,7 @@
};
uart3_data: uart3-data {
- samsung,pins = "gpa1-4", "gpa1-4";
+ samsung,pins = "gpa1-4", "gpa1-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
From: Hans de Goede <[email protected]>
[ Upstream commit 2c39a01154ea57d596470afa1d278e3be3b37f6a ]
The TrekStor SurfTab duo W1 10.1 has a hw bug where turning eldo2 back on
after having turned it off causes the CPLM3218 ambient-light-sensor on
the front camera sensor's I2C bus to crash, hanging the bus.
Add a DMI quirk table for systems on which to leave eldo2 on.
Note an alternative fix is to turn off the CPLM3218 ambient-light-sensor
as long as the camera sensor is being used, this is what Windows seems
to do as a workaround (based on analyzing the DSDT). But that is not
easy to do cleanly under Linux.
Link: https://lore.kernel.org/linux-media/[email protected]
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../media/atomisp/pci/atomisp_gmin_platform.c | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c b/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c
index 34480ca16474..c9ee85037644 100644
--- a/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c
+++ b/drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c
@@ -729,6 +729,21 @@ static int axp_regulator_set(struct device *dev, struct gmin_subdev *gs,
return 0;
}
+/*
+ * Some boards contain a hw-bug where turning eldo2 back on after having turned
+ * it off causes the CPLM3218 ambient-light-sensor on the image-sensor's I2C bus
+ * to crash, hanging the bus. Do not turn eldo2 off on these systems.
+ */
+static const struct dmi_system_id axp_leave_eldo2_on_ids[] = {
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TrekStor"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "SurfTab duo W1 10.1 (VT4)"),
+ },
+ },
+ { }
+};
+
static int axp_v1p8_on(struct device *dev, struct gmin_subdev *gs)
{
int ret;
@@ -763,6 +778,9 @@ static int axp_v1p8_off(struct device *dev, struct gmin_subdev *gs)
if (ret)
return ret;
+ if (dmi_check_system(axp_leave_eldo2_on_ids))
+ return 0;
+
ret = axp_regulator_set(dev, gs, gs->eldo2_sel_reg, gs->eldo2_1p8v,
ELDO_CTRL_REG, gs->eldo2_ctrl_shift, false);
return ret;
--
2.34.1
From: Jiasheng Jiang <[email protected]>
[ Upstream commit b30537a4cedcacf0ade2f33ebb7610178ed1e7d7 ]
As the potential failure of the devm_request_threaded_irq(),
it should be better to check the return value and return
error if fails.
Fixes: fa659a40b80b ("iio: adc: twl6030-gpadc: Use devm_* API family")
Signed-off-by: Jiasheng Jiang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/iio/adc/twl6030-gpadc.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/iio/adc/twl6030-gpadc.c b/drivers/iio/adc/twl6030-gpadc.c
index c6416ad795ca..256177b15c51 100644
--- a/drivers/iio/adc/twl6030-gpadc.c
+++ b/drivers/iio/adc/twl6030-gpadc.c
@@ -911,6 +911,8 @@ static int twl6030_gpadc_probe(struct platform_device *pdev)
ret = devm_request_threaded_irq(dev, irq, NULL,
twl6030_gpadc_irq_handler,
IRQF_ONESHOT, "twl6030_gpadc", indio_dev);
+ if (ret)
+ return ret;
ret = twl6030_gpadc_enable_irq(TWL6030_GPADC_RT_SW1_EOC_MASK);
if (ret < 0) {
--
2.34.1
From: Nishanth Menon <[email protected]>
commit 1a307cc299430dd7139d351a3b8941f493dfa885 upstream.
Though GIC ARE option is disabled for no GIC-v2 compatibility,
Cortex-A72 is free to implement the CPU interface as long as it
communicates with the GIC using the stream protocol. This requires
that the SoC integration mark out the PERIPHBASE[1] as reserved area
within the SoC. See longer discussion in [2] for further information.
Update the GIC register map to indicate offsets from PERIPHBASE based
on [3]. Without doing this, systems like kvm will not function with
gic-v2 emulation.
[1] https://developer.arm.com/documentation/100095/0002/system-control/aarch64-register-descriptions/configuration-base-address-register--el1
[2] https://lore.kernel.org/all/[email protected]/
[3] https://developer.arm.com/documentation/100095/0002/way1382452674438
Cc: [email protected]
Fixes: d361ed88455f ("arm64: dts: ti: Add support for J7200 SoC")
Reported-by: Marc Zyngier <[email protected]>
Signed-off-by: Nishanth Menon <[email protected]>
Acked-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 5 ++++-
arch/arm64/boot/dts/ti/k3-j7200.dtsi | 1 +
2 files changed, 5 insertions(+), 1 deletion(-)
--- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
@@ -47,7 +47,10 @@
#interrupt-cells = <3>;
interrupt-controller;
reg = <0x00 0x01800000 0x00 0x10000>, /* GICD */
- <0x00 0x01900000 0x00 0x100000>; /* GICR */
+ <0x00 0x01900000 0x00 0x100000>, /* GICR */
+ <0x00 0x6f000000 0x00 0x2000>, /* GICC */
+ <0x00 0x6f010000 0x00 0x1000>, /* GICH */
+ <0x00 0x6f020000 0x00 0x2000>; /* GICV */
/* vcpumntirq: virtual CPU interface maintenance interrupt */
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
--- a/arch/arm64/boot/dts/ti/k3-j7200.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200.dtsi
@@ -127,6 +127,7 @@
<0x00 0x00a40000 0x00 0x00a40000 0x00 0x00000800>, /* timesync router */
<0x00 0x01000000 0x00 0x01000000 0x00 0x0d000000>, /* Most peripherals */
<0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>, /* MAIN NAVSS */
+ <0x00 0x6f000000 0x00 0x6f000000 0x00 0x00310000>, /* A72 PERIPHBASE */
<0x00 0x70000000 0x00 0x70000000 0x00 0x00800000>, /* MSMC RAM */
<0x00 0x18000000 0x00 0x18000000 0x00 0x08000000>, /* PCIe1 DAT0 */
<0x41 0x00000000 0x41 0x00000000 0x01 0x00000000>, /* PCIe1 DAT1 */
From: Trond Myklebust <[email protected]>
[ Upstream commit 6c984083ec2453dfd3fcf98f392f34500c73e3f2 ]
The use of mapping_set_error() in conjunction with calls to
filemap_check_errors() is problematic because every error gets reported
as either an EIO or an ENOSPC by filemap_check_errors() in functions
such as filemap_write_and_wait() or filemap_write_and_wait_range().
In almost all cases, we prefer to use the more nuanced wb errors.
Fixes: b8946d7bfb94 ("NFS: Revalidate the file mapping on all fatal writeback errors")
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/nfs/write.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/fs/nfs/write.c b/fs/nfs/write.c
index bde4c362841f..cc926e69ee9b 100644
--- a/fs/nfs/write.c
+++ b/fs/nfs/write.c
@@ -314,7 +314,10 @@ static void nfs_mapping_set_error(struct page *page, int error)
struct address_space *mapping = page_file_mapping(page);
SetPageError(page);
- mapping_set_error(mapping, error);
+ filemap_set_wb_err(mapping, error);
+ if (mapping->host)
+ errseq_set(&mapping->host->i_sb->s_wb_err,
+ error == -ENOSPC ? -ENOSPC : -EIO);
nfs_set_pageerror(mapping);
}
--
2.34.1
From: Jonathan Neuschäfer <[email protected]>
[ Upstream commit 8bed4ed5aa3431085d9d27afc35d684856460eda ]
In order that the end of a clk_div_table can be detected, it must be
terminated with a sentinel element (.div = 0).
Fixes: 631c53478973d ("clk: Add CLPS711X clk driver")
Signed-off-by: Jonathan Neuschäfer <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/clk-clps711x.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/clk/clk-clps711x.c b/drivers/clk/clk-clps711x.c
index a2c6486ef170..f8417ee2961a 100644
--- a/drivers/clk/clk-clps711x.c
+++ b/drivers/clk/clk-clps711x.c
@@ -28,11 +28,13 @@ static const struct clk_div_table spi_div_table[] = {
{ .val = 1, .div = 8, },
{ .val = 2, .div = 2, },
{ .val = 3, .div = 1, },
+ { /* sentinel */ }
};
static const struct clk_div_table timer_div_table[] = {
{ .val = 0, .div = 256, },
{ .val = 1, .div = 1, },
+ { /* sentinel */ }
};
struct clps711x_clk {
--
2.34.1
From: Chao Yu <[email protected]>
commit 6d18762ed5cd549fde74fd0e05d4d87bac5a3beb upstream.
As Pavel Machek reported in below link [1]:
After commit 77900c45ee5c ("f2fs: fix to do sanity check in is_alive()"),
node page should be unlock via calling f2fs_put_page() in the error path
of is_alive(), otherwise, f2fs may hang when it tries to lock the node
page, fix it.
[1] https://lore.kernel.org/stable/[email protected]/
Fixes: 77900c45ee5c ("f2fs: fix to do sanity check in is_alive()")
Cc: <[email protected]>
Reported-by: Pavel Machek <[email protected]>
Signed-off-by: Pavel Machek <[email protected]>
Signed-off-by: Chao Yu <[email protected]>
Signed-off-by: Jaegeuk Kim <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/f2fs/gc.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/fs/f2fs/gc.c
+++ b/fs/f2fs/gc.c
@@ -998,8 +998,10 @@ static bool is_alive(struct f2fs_sb_info
set_sbi_flag(sbi, SBI_NEED_FSCK);
}
- if (f2fs_check_nid_range(sbi, dni->ino))
+ if (f2fs_check_nid_range(sbi, dni->ino)) {
+ f2fs_put_page(node_page, 1);
return false;
+ }
*nofs = ofs_of_node(node_page);
source_blkaddr = data_blkaddr(NULL, node_page, ofs_in_node);
From: Dario Binacchi <[email protected]>
[ Upstream commit 2970bf5a32f079e1e9197411db4fe9faccb1503a ]
Set the controller registers according to the real clock rate. The
controller registers configuration (setup, hold, timeout, ... cycles)
depends on the clock rate of the GPMI. Using the real rate instead of
the ideal one, avoids that this inaccuracy (required_rate - real_rate)
affects the registers setting.
This patch has been tested on two custom boards with i.MX28 and i.MX6
SOCs:
- i.MX28:
required rate 100MHz, real rate 99.3MHz
- i.MX6
required rate 100MHz, real rate 99MHz
Fixes: b1206122069a ("mtd: rawnand: gpmi: use core timings instead of an empirical derivation")
Co-developed-by: Michael Trimarchi <[email protected]>
Signed-off-by: Michael Trimarchi <[email protected]>
Signed-off-by: Dario Binacchi <[email protected]>
Tested-by: Sascha Hauer <[email protected]>
Reviewed-by: Sascha Hauer <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
index cb7631145700..92e8ca56f566 100644
--- a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
@@ -646,6 +646,7 @@ static void gpmi_nfc_compute_timings(struct gpmi_nand_data *this,
const struct nand_sdr_timings *sdr)
{
struct gpmi_nfc_hardware_timing *hw = &this->hw;
+ struct resources *r = &this->resources;
unsigned int dll_threshold_ps = this->devdata->max_chain_delay;
unsigned int period_ps, reference_period_ps;
unsigned int data_setup_cycles, data_hold_cycles, addr_setup_cycles;
@@ -669,6 +670,8 @@ static void gpmi_nfc_compute_timings(struct gpmi_nand_data *this,
wrn_dly_sel = BV_GPMI_CTRL1_WRN_DLY_SEL_NO_DELAY;
}
+ hw->clk_rate = clk_round_rate(r->clock[0], hw->clk_rate);
+
/* SDR core timings are given in picoseconds */
period_ps = div_u64((u64)NSEC_PER_SEC * 1000, hw->clk_rate);
--
2.34.1
From: Guangbin Huang <[email protected]>
commit 7ed258f12ec5ce855f15cdfb5710361dc82fe899 upstream.
When user delete vlan 0, as driver will not delete vlan 0 for hardware in
function hclge_set_vlan_filter_hw(), so vlan 0 in software vlan talbe should
not be deleted.
Fixes: fe4144d47eef ("net: hns3: sync VLAN filter entries when kill VLAN ID failed")
Signed-off-by: Guangbin Huang <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -9197,11 +9197,11 @@ int hclge_set_vlan_filter(struct hnae3_h
}
if (!ret) {
- if (is_kill)
- hclge_rm_vport_vlan_table(vport, vlan_id, false);
- else
+ if (!is_kill)
hclge_add_vport_vlan_table(vport, vlan_id,
writen_to_tbl);
+ else if (is_kill && vlan_id != 0)
+ hclge_rm_vport_vlan_table(vport, vlan_id, false);
} else if (is_kill) {
/* when remove hw vlan filter failed, record the vlan id,
* and try to remove it from hw later, to be consistence
From: Mingzhe Zou <[email protected]>
commit 887554ab96588de2917b6c8c73e552da082e5368 upstream.
When multiple threads to check btree nodes in parallel, the main
thread wait for all threads to stop or CACHE_SET_IO_DISABLE flag:
wait_event_interruptible(check_state->wait,
atomic_read(&check_state->started) == 0 ||
test_bit(CACHE_SET_IO_DISABLE, &c->flags));
However, the bch_btree_node_read and bch_btree_node_read_done
maybe call bch_cache_set_error, then the CACHE_SET_IO_DISABLE
will be set. If the flag already set, the main thread return
error. At the same time, maybe some threads still running and
read NULL pointer, the kernel will crash.
This patch change the event wait condition, the main thread must
wait for all threads to stop.
Fixes: 8e7102273f597 ("bcache: make bch_btree_check() to be multithreaded")
Signed-off-by: Mingzhe Zou <[email protected]>
Cc: [email protected] # v5.7+
Signed-off-by: Coly Li <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/md/bcache/btree.c | 6 ++++--
drivers/md/bcache/writeback.c | 6 ++++--
2 files changed, 8 insertions(+), 4 deletions(-)
--- a/drivers/md/bcache/btree.c
+++ b/drivers/md/bcache/btree.c
@@ -2060,9 +2060,11 @@ int bch_btree_check(struct cache_set *c)
}
}
+ /*
+ * Must wait for all threads to stop.
+ */
wait_event_interruptible(check_state->wait,
- atomic_read(&check_state->started) == 0 ||
- test_bit(CACHE_SET_IO_DISABLE, &c->flags));
+ atomic_read(&check_state->started) == 0);
for (i = 0; i < check_state->total_threads; i++) {
if (check_state->infos[i].result) {
--- a/drivers/md/bcache/writeback.c
+++ b/drivers/md/bcache/writeback.c
@@ -952,9 +952,11 @@ void bch_sectors_dirty_init(struct bcach
}
}
+ /*
+ * Must wait for all threads to stop.
+ */
wait_event_interruptible(state->wait,
- atomic_read(&state->started) == 0 ||
- test_bit(CACHE_SET_IO_DISABLE, &c->flags));
+ atomic_read(&state->started) == 0);
out:
kfree(state);
From: Miaoqian Lin <[email protected]>
[ Upstream commit f590797fa3c1bccdd19e55441592a23b46aef449 ]
This node pointer is returned by of_parse_phandle() with refcount
incremented in this function.
Calling of_node_put() to avoid the refcount leak.
Fixes: 531f67e41dcd ("ASoC: at91sam9g20ek-wm8731: convert to dt support")
Signed-off-by: Miaoqian Lin <[email protected]>
Reviewed-by: Codrin Ciubotariu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/atmel/sam9g20_wm8731.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/sound/soc/atmel/sam9g20_wm8731.c b/sound/soc/atmel/sam9g20_wm8731.c
index ed1f69b57024..8a55d59a6c2a 100644
--- a/sound/soc/atmel/sam9g20_wm8731.c
+++ b/sound/soc/atmel/sam9g20_wm8731.c
@@ -214,6 +214,7 @@ static int at91sam9g20ek_audio_probe(struct platform_device *pdev)
cpu_np = of_parse_phandle(np, "atmel,ssc-controller", 0);
if (!cpu_np) {
dev_err(&pdev->dev, "dai and pcm info missing\n");
+ of_node_put(codec_np);
return -EINVAL;
}
at91sam9g20ek_dai.cpus->of_node = cpu_np;
--
2.34.1
From: Miaoqian Lin <[email protected]>
[ Upstream commit a58c22cfbbf62fefca090334bbd35fd132e92a23 ]
The device_node pointer is returned by of_parse_phandle() with refcount
incremented. We should use of_node_put() on it when done.
Fixes: f76ee892a99e ("omapfb: copy omapdss & displays for omapfb")
Signed-off-by: Miaoqian Lin <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/video/fbdev/omap2/omapfb/displays/connector-dvi.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/video/fbdev/omap2/omapfb/displays/connector-dvi.c b/drivers/video/fbdev/omap2/omapfb/displays/connector-dvi.c
index b4a1aefff766..777f6d66c28c 100644
--- a/drivers/video/fbdev/omap2/omapfb/displays/connector-dvi.c
+++ b/drivers/video/fbdev/omap2/omapfb/displays/connector-dvi.c
@@ -251,6 +251,7 @@ static int dvic_probe_of(struct platform_device *pdev)
adapter_node = of_parse_phandle(node, "ddc-i2c-bus", 0);
if (adapter_node) {
adapter = of_get_i2c_adapter_by_node(adapter_node);
+ of_node_put(adapter_node);
if (adapter == NULL) {
dev_err(&pdev->dev, "failed to parse ddc-i2c-bus\n");
omap_dss_put_device(ddata->in);
--
2.34.1
From: Alistair Popple <[email protected]>
commit ddbc84f3f595cf1fc8234a191193b5d20ad43938 upstream.
ZONE_MOVABLE uses the remaining memory in each node. Its starting pfn
is also aligned to MAX_ORDER_NR_PAGES. It is possible for the remaining
memory in a node to be less than MAX_ORDER_NR_PAGES, meaning there is
not enough room for ZONE_MOVABLE on that node.
Unfortunately this condition is not checked for. This leads to
zone_movable_pfn[] getting set to a pfn greater than the last pfn in a
node.
calculate_node_totalpages() then sets zone->present_pages to be greater
than zone->spanned_pages which is invalid, as spanned_pages represents
the maximum number of pages in a zone assuming no holes.
Subsequently it is possible free_area_init_core() will observe a zone of
size zero with present pages. In this case it will skip setting up the
zone, including the initialisation of free_lists[].
However populated_zone() checks zone->present_pages to see if a zone has
memory available. This is used by iterators such as
walk_zones_in_node(). pagetypeinfo_showfree() uses this to walk the
free_list of each zone in each node, which are assumed to be initialised
due to the zone not being empty.
As free_area_init_core() never initialised the free_lists[] this results
in the following kernel crash when trying to read /proc/pagetypeinfo:
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC NOPTI
CPU: 0 PID: 456 Comm: cat Not tainted 5.16.0 #461
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014
RIP: 0010:pagetypeinfo_show+0x163/0x460
Code: 9e 82 e8 80 57 0e 00 49 8b 06 b9 01 00 00 00 4c 39 f0 75 16 e9 65 02 00 00 48 83 c1 01 48 81 f9 a0 86 01 00 0f 84 48 02 00 00 <48> 8b 00 4c 39 f0 75 e7 48 c7 c2 80 a2 e2 82 48 c7 c6 79 ef e3 82
RSP: 0018:ffffc90001c4bd10 EFLAGS: 00010003
RAX: 0000000000000000 RBX: ffff88801105f638 RCX: 0000000000000001
RDX: 0000000000000001 RSI: 000000000000068b RDI: ffff8880163dc68b
RBP: ffffc90001c4bd90 R08: 0000000000000001 R09: ffff8880163dc67e
R10: 656c6261766f6d6e R11: 6c6261766f6d6e55 R12: ffff88807ffb4a00
R13: ffff88807ffb49f8 R14: ffff88807ffb4580 R15: ffff88807ffb3000
FS: 00007f9c83eff5c0(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 0000000013c8e000 CR4: 0000000000350ef0
Call Trace:
seq_read_iter+0x128/0x460
proc_reg_read_iter+0x51/0x80
new_sync_read+0x113/0x1a0
vfs_read+0x136/0x1d0
ksys_read+0x70/0xf0
__x64_sys_read+0x1a/0x20
do_syscall_64+0x3b/0xc0
entry_SYSCALL_64_after_hwframe+0x44/0xae
Fix this by checking that the aligned zone_movable_pfn[] does not exceed
the end of the node, and if it does skip creating a movable zone on this
node.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 2a1e274acf0b ("Create the ZONE_MOVABLE zone")
Signed-off-by: Alistair Popple <[email protected]>
Acked-by: David Hildenbrand <[email protected]>
Acked-by: Mel Gorman <[email protected]>
Cc: John Hubbard <[email protected]>
Cc: Zi Yan <[email protected]>
Cc: Anshuman Khandual <[email protected]>
Cc: Oscar Salvador <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/page_alloc.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -7402,10 +7402,17 @@ restart:
out2:
/* Align start of ZONE_MOVABLE on all nids to MAX_ORDER_NR_PAGES */
- for (nid = 0; nid < MAX_NUMNODES; nid++)
+ for (nid = 0; nid < MAX_NUMNODES; nid++) {
+ unsigned long start_pfn, end_pfn;
+
zone_movable_pfn[nid] =
roundup(zone_movable_pfn[nid], MAX_ORDER_NR_PAGES);
+ get_pfn_range_for_nid(nid, &start_pfn, &end_pfn);
+ if (zone_movable_pfn[nid] >= end_pfn)
+ zone_movable_pfn[nid] = 0;
+ }
+
out:
/* restore the node_state */
node_states[N_MEMORY] = saved_node_state;
From: Christophe JAILLET <[email protected]>
[ Upstream commit 043cfff99a18933fda2fb2e163daee73cc07910b ]
Remove an extra ";" which breaks compilation.
Fixes: 53bf2b0e4e4c ("firmware: ti_sci: Add support for getting resource with subtype")
Signed-off-by: Christophe JAILLET <[email protected]>
Signed-off-by: Nishanth Menon <[email protected]>
Link: https://lore.kernel.org/r/e6c3cb793e1a6a2a0ae2528d5a5650dfe6a4b6ff.1640276505.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <[email protected]>
---
include/linux/soc/ti/ti_sci_protocol.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/linux/soc/ti/ti_sci_protocol.h b/include/linux/soc/ti/ti_sci_protocol.h
index cf27b080e148..b1af87330f86 100644
--- a/include/linux/soc/ti/ti_sci_protocol.h
+++ b/include/linux/soc/ti/ti_sci_protocol.h
@@ -618,7 +618,7 @@ devm_ti_sci_get_of_resource(const struct ti_sci_handle *handle,
static inline struct ti_sci_resource *
devm_ti_sci_get_resource(const struct ti_sci_handle *handle, struct device *dev,
- u32 dev_id, u32 sub_type);
+ u32 dev_id, u32 sub_type)
{
return ERR_PTR(-EINVAL);
}
--
2.34.1
From: Miaoqian Lin <[email protected]>
[ Upstream commit 505b5b1616e200042999de715dbe7c1e2735cd65 ]
The device_node pointer is returned by of_parse_phandle() with refcount
incremented. We should use of_node_put() on it when done.
Fixes: dc160e449122 ("remoteproc: qcom: Introduce Non-PAS ADSP PIL driver")
Signed-off-by: Miaoqian Lin <[email protected]>
Signed-off-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/remoteproc/qcom_q6v5_adsp.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/remoteproc/qcom_q6v5_adsp.c b/drivers/remoteproc/qcom_q6v5_adsp.c
index 9eb599701f9b..c39138d39cf0 100644
--- a/drivers/remoteproc/qcom_q6v5_adsp.c
+++ b/drivers/remoteproc/qcom_q6v5_adsp.c
@@ -406,6 +406,7 @@ static int adsp_alloc_memory_region(struct qcom_adsp *adsp)
}
ret = of_address_to_resource(node, 0, &r);
+ of_node_put(node);
if (ret)
return ret;
--
2.34.1
From: Wen Gong <[email protected]>
[ Upstream commit e3fb3d4418fce5484dfe7995fcd94c18b10a431a ]
In function ath10k_wow_convert_8023_to_80211(), it will do memcpy for
the new->pattern, and currently the new->pattern and new->mask is same
with the old, then the memcpy of new->pattern will also overwrite the
old->pattern, because the header format of new->pattern is 802.11,
its length is larger than the old->pattern which is 802.3. Then the
operation of "Copy frame body" will copy a mistake value because the
body memory has been overwrite when memcpy the new->pattern.
Assign another empty value to new_pattern to avoid the overwrite issue.
Tested-on: QCA6174 hw3.2 SDIO WLAN.RMH.4.4.1-00049
Fixes: fa3440fa2fa1 ("ath10k: convert wow pattern from 802.3 to 802.11")
Signed-off-by: Wen Gong <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/ath10k/wow.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/wow.c b/drivers/net/wireless/ath/ath10k/wow.c
index 7d65c115669f..20b9aa8ddf7d 100644
--- a/drivers/net/wireless/ath/ath10k/wow.c
+++ b/drivers/net/wireless/ath/ath10k/wow.c
@@ -337,14 +337,15 @@ static int ath10k_vif_wow_set_wakeups(struct ath10k_vif *arvif,
if (patterns[i].mask[j / 8] & BIT(j % 8))
bitmask[j] = 0xff;
old_pattern.mask = bitmask;
- new_pattern = old_pattern;
if (ar->wmi.rx_decap_mode == ATH10K_HW_TXRX_NATIVE_WIFI) {
- if (patterns[i].pkt_offset < ETH_HLEN)
+ if (patterns[i].pkt_offset < ETH_HLEN) {
ath10k_wow_convert_8023_to_80211(&new_pattern,
&old_pattern);
- else
+ } else {
+ new_pattern = old_pattern;
new_pattern.pkt_offset += WOW_HDR_LEN - ETH_HLEN;
+ }
}
if (WARN_ON(new_pattern.pattern_len > WOW_MAX_PATTERN_SIZE))
--
2.34.1
From: Randy Dunlap <[email protected]>
[ Upstream commit e6e1e7b19fa132d23d09c465942aab4c110d3da9 ]
When CONFIG_MCF_EDMA is set (due to COMPILE_TEST, not due to
CONFIG_M5441x), coldfire/device.c has compile errors due to
missing MCFEDMA_* symbols. In the .config file that was provided,
CONFIG_M5206=y, not CONFIG_M5441x, so <asm/m5441xsim.h> is not
included in coldfire/device.c.
Only build the MCF_EDMA code in coldfire/device.c if the MCFEDMA_*
hardware macros are defined.
Fixes these build errors:
../arch/m68k/coldfire/device.c:512:35: error: 'MCFEDMA_BASE' undeclared here (not in a function); did you mean 'MCFDMA_BASE1'?
512 | .start = MCFEDMA_BASE,
../arch/m68k/coldfire/device.c:513:50: error: 'MCFEDMA_SIZE' undeclared here (not in a function)
513 | .end = MCFEDMA_BASE + MCFEDMA_SIZE - 1,
../arch/m68k/coldfire/device.c:517:35: error: 'MCFEDMA_IRQ_INTR0' undeclared here (not in a function)
517 | .start = MCFEDMA_IRQ_INTR0,
../arch/m68k/coldfire/device.c:523:35: error: 'MCFEDMA_IRQ_INTR16' undeclared here (not in a function)
523 | .start = MCFEDMA_IRQ_INTR16,
../arch/m68k/coldfire/device.c:529:35: error: 'MCFEDMA_IRQ_INTR56' undeclared here (not in a function)
529 | .start = MCFEDMA_IRQ_INTR56,
../arch/m68k/coldfire/device.c:535:35: error: 'MCFEDMA_IRQ_ERR' undeclared here (not in a function)
535 | .start = MCFEDMA_IRQ_ERR,
Fixes: d7e9d01ac292 ("m68k: add ColdFire mcf5441x eDMA platform support")
Signed-off-by: Randy Dunlap <[email protected]>
Reported-by: kernel test robot <[email protected]>
Link: lore.kernel.org/r/[email protected]
Cc: Angelo Dureghello <[email protected]>
Cc: Greg Ungerer <[email protected]>
Cc: Greg Ungerer <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Greg Ungerer <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/m68k/coldfire/device.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/m68k/coldfire/device.c b/arch/m68k/coldfire/device.c
index 59f7dfe50a4d..a055616942a1 100644
--- a/arch/m68k/coldfire/device.c
+++ b/arch/m68k/coldfire/device.c
@@ -480,7 +480,7 @@ static struct platform_device mcf_i2c5 = {
#endif /* MCFI2C_BASE5 */
#endif /* IS_ENABLED(CONFIG_I2C_IMX) */
-#if IS_ENABLED(CONFIG_MCF_EDMA)
+#ifdef MCFEDMA_BASE
static const struct dma_slave_map mcf_edma_map[] = {
{ "dreq0", "rx-tx", MCF_EDMA_FILTER_PARAM(0) },
@@ -552,7 +552,7 @@ static struct platform_device mcf_edma = {
.platform_data = &mcf_edma_data,
}
};
-#endif /* IS_ENABLED(CONFIG_MCF_EDMA) */
+#endif /* MCFEDMA_BASE */
#ifdef MCFSDHC_BASE
static struct mcf_esdhc_platform_data mcf_esdhc_data = {
@@ -610,7 +610,7 @@ static struct platform_device *mcf_devices[] __initdata = {
&mcf_i2c5,
#endif
#endif
-#if IS_ENABLED(CONFIG_MCF_EDMA)
+#ifdef MCFEDMA_BASE
&mcf_edma,
#endif
#ifdef MCFSDHC_BASE
--
2.34.1
From: Zhenzhong Duan <[email protected]>
[ Upstream commit f66af9f222f08d5b11ea41c1bd6c07a0f12daa07 ]
In emulation of writing to cr8, one of the lowest four bits in TPR[3:0]
is kept.
According to Intel SDM 10.8.6.1(baremetal scenario):
"APIC.TPR[bits 7:4] = CR8[bits 3:0], APIC.TPR[bits 3:0] = 0";
and SDM 28.3(use TPR shadow):
"MOV to CR8. The instruction stores bits 3:0 of its source operand into
bits 7:4 of VTPR; the remainder of VTPR (bits 3:0 and bits 31:8) are
cleared.";
and AMD's APM 16.6.4:
"Task Priority Sub-class (TPS)-Bits 3 : 0. The TPS field indicates the
current sub-priority to be used when arbitrating lowest-priority messages.
This field is written with zero when TPR is written using the architectural
CR8 register.";
so in KVM emulated scenario, clear TPR[3:0] to make a consistent behavior
as in other scenarios.
This doesn't impact evaluation and delivery of pending virtual interrupts
because processor does not use the processor-priority sub-class to
determine which interrupts to delivery and which to inhibit.
Sub-class is used by hardware to arbitrate lowest priority interrupts,
but KVM just does a round-robin style delivery.
Fixes: b93463aa59d6 ("KVM: Accelerated apic support")
Signed-off-by: Zhenzhong Duan <[email protected]>
Reviewed-by: Sean Christopherson <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/kvm/lapic.c | 5 +----
1 file changed, 1 insertion(+), 4 deletions(-)
diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index 677d21082454..de11149e28e0 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -2227,10 +2227,7 @@ void kvm_set_lapic_tscdeadline_msr(struct kvm_vcpu *vcpu, u64 data)
void kvm_lapic_set_tpr(struct kvm_vcpu *vcpu, unsigned long cr8)
{
- struct kvm_lapic *apic = vcpu->arch.apic;
-
- apic_set_tpr(apic, ((cr8 & 0x0f) << 4)
- | (kvm_lapic_get_reg(apic, APIC_TASKPRI) & 4));
+ apic_set_tpr(vcpu->arch.apic, (cr8 & 0x0f) << 4);
}
u64 kvm_lapic_get_cr8(struct kvm_vcpu *vcpu)
--
2.34.1
From: Shin'ichiro Kawasaki <[email protected]>
commit 572299f03afd676dd4e20669cdaf5ed0fe1379d4 upstream.
When IO requests are made continuously and the target block device
handles requests faster than request arrival, the request dispatch loop
keeps on repeating to dispatch the arriving requests very long time,
more than a minute. Since the loop runs as a workqueue worker task, the
very long loop duration triggers workqueue watchdog timeout and BUG [1].
To avoid the very long loop duration, break the loop periodically. When
opportunity to dispatch requests still exists, check need_resched(). If
need_resched() returns true, the dispatch loop already consumed its time
slice, then reschedule the dispatch work and break the loop. With heavy
IO load, need_resched() does not return true for 20~30 seconds. To cover
such case, check time spent in the dispatch loop with jiffies. If more
than 1 second is spent, reschedule the dispatch work and break the loop.
[1]
[ 609.691437] BUG: workqueue lockup - pool cpus=10 node=1 flags=0x0 nice=-20 stuck for 35s!
[ 609.701820] Showing busy workqueues and worker pools:
[ 609.707915] workqueue events: flags=0x0
[ 609.712615] pwq 0: cpus=0 node=0 flags=0x0 nice=0 active=1/256 refcnt=2
[ 609.712626] pending: drm_fb_helper_damage_work [drm_kms_helper]
[ 609.712687] workqueue events_freezable: flags=0x4
[ 609.732943] pwq 0: cpus=0 node=0 flags=0x0 nice=0 active=1/256 refcnt=2
[ 609.732952] pending: pci_pme_list_scan
[ 609.732968] workqueue events_power_efficient: flags=0x80
[ 609.751947] pwq 0: cpus=0 node=0 flags=0x0 nice=0 active=1/256 refcnt=2
[ 609.751955] pending: neigh_managed_work
[ 609.752018] workqueue kblockd: flags=0x18
[ 609.769480] pwq 21: cpus=10 node=1 flags=0x0 nice=-20 active=3/256 refcnt=4
[ 609.769488] in-flight: 1020:blk_mq_run_work_fn
[ 609.769498] pending: blk_mq_timeout_work, blk_mq_run_work_fn
[ 609.769744] pool 21: cpus=10 node=1 flags=0x0 nice=-20 hung=35s workers=2 idle: 67
[ 639.899730] BUG: workqueue lockup - pool cpus=10 node=1 flags=0x0 nice=-20 stuck for 66s!
[ 639.909513] Showing busy workqueues and worker pools:
[ 639.915404] workqueue events: flags=0x0
[ 639.920197] pwq 0: cpus=0 node=0 flags=0x0 nice=0 active=1/256 refcnt=2
[ 639.920215] pending: drm_fb_helper_damage_work [drm_kms_helper]
[ 639.920365] workqueue kblockd: flags=0x18
[ 639.939932] pwq 21: cpus=10 node=1 flags=0x0 nice=-20 active=3/256 refcnt=4
[ 639.939942] in-flight: 1020:blk_mq_run_work_fn
[ 639.939955] pending: blk_mq_timeout_work, blk_mq_run_work_fn
[ 639.940212] pool 21: cpus=10 node=1 flags=0x0 nice=-20 hung=66s workers=2 idle: 67
Fixes: 6e6fcbc27e778 ("blk-mq: support batching dispatch in case of io")
Signed-off-by: Shin'ichiro Kawasaki <[email protected]>
Cc: [email protected] # v5.10+
Link: https://lore.kernel.org/linux-block/20220310091649.zypaem5lkyfadymg@shindev/
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
block/blk-mq-sched.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
--- a/block/blk-mq-sched.c
+++ b/block/blk-mq-sched.c
@@ -194,11 +194,18 @@ static int __blk_mq_do_dispatch_sched(st
static int blk_mq_do_dispatch_sched(struct blk_mq_hw_ctx *hctx)
{
+ unsigned long end = jiffies + HZ;
int ret;
do {
ret = __blk_mq_do_dispatch_sched(hctx);
- } while (ret == 1);
+ if (ret != 1)
+ break;
+ if (need_resched() || time_is_before_jiffies(end)) {
+ blk_mq_delay_run_hw_queue(hctx, 0);
+ break;
+ }
+ } while (1);
return ret;
}
From: Nilesh Javali <[email protected]>
commit 14cb838d245ae0d523b2f7804af5a02c22e79f5a upstream.
Fix smatch-reported warning message:
drivers/scsi/qla2xxx/qla_target.c:3324 qlt_xmit_response() warn: missing error
code 'res'
Link: https://lore.kernel.org/r/[email protected]
Fixes: 4a8f71014b4d ("scsi: qla2xxx: Fix unmap of already freed sgl")
Cc: [email protected]
Reviewed-by: Himanshu Madhani <[email protected]>
Signed-off-by: Nilesh Javali <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/qla2xxx/qla_target.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/scsi/qla2xxx/qla_target.c
+++ b/drivers/scsi/qla2xxx/qla_target.c
@@ -3256,6 +3256,7 @@ int qlt_xmit_response(struct qla_tgt_cmd
"RESET-RSP online/active/old-count/new-count = %d/%d/%d/%d.\n",
vha->flags.online, qla2x00_reset_active(vha),
cmd->reset_count, qpair->chip_reset);
+ res = 0;
goto out_unmap_unlock;
}
From: Damien Le Moal <[email protected]>
[ Upstream commit f8b12dfb476dad38ce755aaf5e2df46f06f1822e ]
All fields of the kek_mgmt_req structure have the type __le32. So make sure
to use cpu_to_le32() to initialize them. This suppresses the sparse
warning:
warning: incorrect type in assignment (different base types)
expected restricted __le32 [addressable] [assigned] [usertype] new_curidx_ksop
got int
Link: https://lore.kernel.org/r/[email protected]
Fixes: f5860992db55 ("[SCSI] pm80xx: Added SPCv/ve specific hardware functionalities and relevant changes in common files")
Reviewed-by: Jack Wang <[email protected]>
Signed-off-by: Damien Le Moal <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/pm8001/pm80xx_hwi.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c
index f9736e02010d..ac6334f8d791 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.c
+++ b/drivers/scsi/pm8001/pm80xx_hwi.c
@@ -1403,12 +1403,13 @@ static int pm80xx_encrypt_update(struct pm8001_hba_info *pm8001_ha)
/* Currently only one key is used. New KEK index is 1.
* Current KEK index is 1. Store KEK to NVRAM is 1.
*/
- payload.new_curidx_ksop = ((1 << 24) | (1 << 16) | (1 << 8) |
- KEK_MGMT_SUBOP_KEYCARDUPDATE);
+ payload.new_curidx_ksop =
+ cpu_to_le32(((1 << 24) | (1 << 16) | (1 << 8) |
+ KEK_MGMT_SUBOP_KEYCARDUPDATE));
pm8001_dbg(pm8001_ha, DEV,
"Saving Encryption info to flash. payload 0x%x\n",
- payload.new_curidx_ksop);
+ le32_to_cpu(payload.new_curidx_ksop));
rc = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &payload,
sizeof(payload), 0);
--
2.34.1
From: Tejun Heo <[email protected]>
commit 6b2b04590b51aa4cf395fcd185ce439cab5961dc upstream.
blk-iocost and iolatency are cgroup aware rq-qos policies but they didn't
disable merges across different cgroups. This obviously can lead to
accounting and control errors but more importantly to priority inversions -
e.g. an IO which belongs to a higher priority cgroup or IO class may end up
getting throttled incorrectly because it gets merged to an IO issued from a
low priority cgroup.
Fix it by adding blk_cgroup_mergeable() which is called from merge paths and
rejects cross-cgroup and cross-issue_as_root merges.
Signed-off-by: Tejun Heo <[email protected]>
Fixes: d70675121546 ("block: introduce blk-iolatency io controller")
Cc: [email protected] # v4.19+
Cc: Josef Bacik <[email protected]>
Link: https://lore.kernel.org/r/Yi/eE/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
block/blk-merge.c | 11 +++++++++++
include/linux/blk-cgroup.h | 17 +++++++++++++++++
2 files changed, 28 insertions(+)
--- a/block/blk-merge.c
+++ b/block/blk-merge.c
@@ -7,6 +7,7 @@
#include <linux/bio.h>
#include <linux/blkdev.h>
#include <linux/scatterlist.h>
+#include <linux/blk-cgroup.h>
#include <trace/events/block.h>
@@ -554,6 +555,9 @@ static inline unsigned int blk_rq_get_ma
static inline int ll_new_hw_segment(struct request *req, struct bio *bio,
unsigned int nr_phys_segs)
{
+ if (!blk_cgroup_mergeable(req, bio))
+ goto no_merge;
+
if (blk_integrity_merge_bio(req->q, req, bio) == false)
goto no_merge;
@@ -650,6 +654,9 @@ static int ll_merge_requests_fn(struct r
if (total_phys_segments > blk_rq_get_max_segments(req))
return 0;
+ if (!blk_cgroup_mergeable(req, next->bio))
+ return 0;
+
if (blk_integrity_merge_rq(q, req, next) == false)
return 0;
@@ -861,6 +868,10 @@ bool blk_rq_merge_ok(struct request *rq,
if (rq->rq_disk != bio->bi_disk)
return false;
+ /* don't merge across cgroup boundaries */
+ if (!blk_cgroup_mergeable(rq, bio))
+ return false;
+
/* only merge integrity protected bio into ditto rq */
if (blk_integrity_merge_bio(rq->q, rq, bio) == false)
return false;
--- a/include/linux/blk-cgroup.h
+++ b/include/linux/blk-cgroup.h
@@ -24,6 +24,7 @@
#include <linux/atomic.h>
#include <linux/kthread.h>
#include <linux/fs.h>
+#include <linux/blk-mq.h>
/* percpu_counter batch for blkg_[rw]stats, per-cpu drift doesn't matter */
#define BLKG_STAT_CPU_BATCH (INT_MAX / 2)
@@ -599,6 +600,21 @@ static inline void blkcg_clear_delay(str
atomic_dec(&blkg->blkcg->css.cgroup->congestion_count);
}
+/**
+ * blk_cgroup_mergeable - Determine whether to allow or disallow merges
+ * @rq: request to merge into
+ * @bio: bio to merge
+ *
+ * @bio and @rq should belong to the same cgroup and their issue_as_root should
+ * match. The latter is necessary as we don't want to throttle e.g. a metadata
+ * update because it happens to be next to a regular IO.
+ */
+static inline bool blk_cgroup_mergeable(struct request *rq, struct bio *bio)
+{
+ return rq->bio->bi_blkg == bio->bi_blkg &&
+ bio_issue_as_root_blkg(rq->bio) == bio_issue_as_root_blkg(bio);
+}
+
void blk_cgroup_bio_start(struct bio *bio);
void blkcg_add_delay(struct blkcg_gq *blkg, u64 now, u64 delta);
void blkcg_schedule_throttle(struct request_queue *q, bool use_memdelay);
@@ -654,6 +670,7 @@ static inline void blkg_put(struct blkcg
static inline bool blkcg_punt_bio_submit(struct bio *bio) { return false; }
static inline void blkcg_bio_issue_init(struct bio *bio) { }
static inline void blk_cgroup_bio_start(struct bio *bio) { }
+static inline bool blk_cgroup_mergeable(struct request *rq, struct bio *bio) { return true; }
#define blk_queue_for_each_rl(rl, q) \
for ((rl) = &(q)->root_rl; (rl); (rl) = NULL)
From: Zhou Qingyang <[email protected]>
[ Upstream commit 2343bcdb4747d4f418a4daf2e898b94f86c24a59 ]
In nvkm_acr_hsfw_load_bl(), the return value of kmalloc() is directly
passed to memcpy(), which could lead to undefined behavior on failure
of kmalloc().
Fix this bug by using kmemdup() instead of kmalloc()+memcpy().
This bug was found by a static analyzer.
Builds with 'make allyesconfig' show no new warnings,
and our static analyzer no longer warns about this code.
Fixes: 22dcda45a3d1 ("drm/nouveau/acr: implement new subdev to replace "secure boot"")
Signed-off-by: Zhou Qingyang <[email protected]>
Reviewed-by: Lyude Paul <[email protected]>
Signed-off-by: Lyude Paul <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/nouveau/nvkm/subdev/acr/hsfw.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/acr/hsfw.c b/drivers/gpu/drm/nouveau/nvkm/subdev/acr/hsfw.c
index 667fa016496e..a6ea89a5d51a 100644
--- a/drivers/gpu/drm/nouveau/nvkm/subdev/acr/hsfw.c
+++ b/drivers/gpu/drm/nouveau/nvkm/subdev/acr/hsfw.c
@@ -142,11 +142,12 @@ nvkm_acr_hsfw_load_bl(struct nvkm_acr *acr, const char *name, int ver,
hsfw->imem_size = desc->code_size;
hsfw->imem_tag = desc->start_tag;
- hsfw->imem = kmalloc(desc->code_size, GFP_KERNEL);
- memcpy(hsfw->imem, data + desc->code_off, desc->code_size);
-
+ hsfw->imem = kmemdup(data + desc->code_off, desc->code_size, GFP_KERNEL);
nvkm_firmware_put(fw);
- return 0;
+ if (!hsfw->imem)
+ return -ENOMEM;
+ else
+ return 0;
}
int
--
2.34.1
From: Jason A. Donenfeld <[email protected]>
commit 77fc73ac89be96ec8f39e8efa53885caa7cb3645 upstream.
The previous commit fixed a memory leak on the send path in the event
that IPv6 is disabled at compile time, but how did a packet even arrive
there to begin with? It turns out we have previously allowed IPv6
endpoints even when IPv6 support is disabled at compile time. This is
awkward and inconsistent. Instead, let's just ignore all things IPv6,
the same way we do other malformed endpoints, in the case where IPv6 is
disabled.
Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
Signed-off-by: Jason A. Donenfeld <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireguard/socket.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/net/wireguard/socket.c
+++ b/drivers/net/wireguard/socket.c
@@ -242,7 +242,7 @@ int wg_socket_endpoint_from_skb(struct e
endpoint->addr4.sin_addr.s_addr = ip_hdr(skb)->saddr;
endpoint->src4.s_addr = ip_hdr(skb)->daddr;
endpoint->src_if4 = skb->skb_iif;
- } else if (skb->protocol == htons(ETH_P_IPV6)) {
+ } else if (IS_ENABLED(CONFIG_IPV6) && skb->protocol == htons(ETH_P_IPV6)) {
endpoint->addr6.sin6_family = AF_INET6;
endpoint->addr6.sin6_port = udp_hdr(skb)->source;
endpoint->addr6.sin6_addr = ipv6_hdr(skb)->saddr;
@@ -285,7 +285,7 @@ void wg_socket_set_peer_endpoint(struct
peer->endpoint.addr4 = endpoint->addr4;
peer->endpoint.src4 = endpoint->src4;
peer->endpoint.src_if4 = endpoint->src_if4;
- } else if (endpoint->addr.sa_family == AF_INET6) {
+ } else if (IS_ENABLED(CONFIG_IPV6) && endpoint->addr.sa_family == AF_INET6) {
peer->endpoint.addr6 = endpoint->addr6;
peer->endpoint.src6 = endpoint->src6;
} else {
From: Li RongQing <[email protected]>
commit c15e0ae42c8e5a61e9aca8aac920517cf7b3e94e upstream.
If apic_id is less than min, and (max - apic_id) is greater than
KVM_IPI_CLUSTER_SIZE, then the third check condition is satisfied but
the new apic_id does not fit the bitmask. In this case __send_ipi_mask
should send the IPI.
This is mostly theoretical, but it can happen if the apic_ids on three
iterations of the loop are for example 1, KVM_IPI_CLUSTER_SIZE, 0.
Fixes: aaffcfd1e82 ("KVM: X86: Implement PV IPIs in linux guest")
Signed-off-by: Li RongQing <[email protected]>
Message-Id: <[email protected]>
Cc: [email protected]
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kernel/kvm.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/x86/kernel/kvm.c
+++ b/arch/x86/kernel/kvm.c
@@ -532,7 +532,7 @@ static void __send_ipi_mask(const struct
} else if (apic_id < min && max - apic_id < KVM_IPI_CLUSTER_SIZE) {
ipi_bitmap <<= min - apic_id;
min = apic_id;
- } else if (apic_id < min + KVM_IPI_CLUSTER_SIZE) {
+ } else if (apic_id > min && apic_id < min + KVM_IPI_CLUSTER_SIZE) {
max = apic_id < max ? max : apic_id;
} else {
ret = kvm_hypercall4(KVM_HC_SEND_IPI, (unsigned long)ipi_bitmap,
From: Dafna Hirschfeld <[email protected]>
[ Upstream commit fbe04b49a54e31f4321d632270207f0e6304cd16 ]
If the callback 'start_streaming' fails, then all
queued buffers in the driver should be returned with
state 'VB2_BUF_STATE_QUEUED'. Currently, they are
returned with 'VB2_BUF_STATE_ERROR' which is wrong.
Fix this. This also fixes the warning:
[ 65.583633] WARNING: CPU: 5 PID: 593 at drivers/media/common/videobuf2/videobuf2-core.c:1612 vb2_start_streaming+0xd4/0x160 [videobuf2_common]
[ 65.585027] Modules linked in: snd_usb_audio snd_hwdep snd_usbmidi_lib snd_rawmidi snd_soc_hdmi_codec dw_hdmi_i2s_audio saa7115 stk1160 videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_common videodev mc crct10dif_ce panfrost snd_soc_simple_card snd_soc_audio_graph_card snd_soc_spdif_tx snd_soc_simple_card_utils gpu_sched phy_rockchip_pcie snd_soc_rockchip_i2s rockchipdrm analogix_dp dw_mipi_dsi dw_hdmi cec drm_kms_helper drm rtc_rk808 rockchip_saradc industrialio_triggered_buffer kfifo_buf rockchip_thermal pcie_rockchip_host ip_tables x_tables ipv6
[ 65.589383] CPU: 5 PID: 593 Comm: v4l2src0:src Tainted: G W 5.16.0-rc4-62408-g32447129cb30-dirty #14
[ 65.590293] Hardware name: Radxa ROCK Pi 4B (DT)
[ 65.590696] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 65.591304] pc : vb2_start_streaming+0xd4/0x160 [videobuf2_common]
[ 65.591850] lr : vb2_start_streaming+0x6c/0x160 [videobuf2_common]
[ 65.592395] sp : ffff800012bc3ad0
[ 65.592685] x29: ffff800012bc3ad0 x28: 0000000000000000 x27: ffff800012bc3cd8
[ 65.593312] x26: 0000000000000000 x25: ffff00000d8a7800 x24: 0000000040045612
[ 65.593938] x23: ffff800011323000 x22: ffff800012bc3cd8 x21: ffff00000908a8b0
[ 65.594562] x20: ffff00000908a8c8 x19: 00000000fffffff4 x18: ffffffffffffffff
[ 65.595188] x17: 000000040044ffff x16: 00400034b5503510 x15: ffff800011323f78
[ 65.595813] x14: ffff000013163886 x13: ffff000013163885 x12: 00000000000002ce
[ 65.596439] x11: 0000000000000028 x10: 0000000000000001 x9 : 0000000000000228
[ 65.597064] x8 : 0101010101010101 x7 : 7f7f7f7f7f7f7f7f x6 : fefefeff726c5e78
[ 65.597690] x5 : ffff800012bc3990 x4 : 0000000000000000 x3 : ffff000009a34880
[ 65.598315] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000007cd99f0
[ 65.598940] Call trace:
[ 65.599155] vb2_start_streaming+0xd4/0x160 [videobuf2_common]
[ 65.599672] vb2_core_streamon+0x17c/0x1a8 [videobuf2_common]
[ 65.600179] vb2_streamon+0x54/0x88 [videobuf2_v4l2]
[ 65.600619] vb2_ioctl_streamon+0x54/0x60 [videobuf2_v4l2]
[ 65.601103] v4l_streamon+0x3c/0x50 [videodev]
[ 65.601521] __video_do_ioctl+0x1a4/0x428 [videodev]
[ 65.601977] video_usercopy+0x320/0x828 [videodev]
[ 65.602419] video_ioctl2+0x3c/0x58 [videodev]
[ 65.602830] v4l2_ioctl+0x60/0x90 [videodev]
[ 65.603227] __arm64_sys_ioctl+0xa8/0xe0
[ 65.603576] invoke_syscall+0x54/0x118
[ 65.603911] el0_svc_common.constprop.3+0x84/0x100
[ 65.604332] do_el0_svc+0x34/0xa0
[ 65.604625] el0_svc+0x1c/0x50
[ 65.604897] el0t_64_sync_handler+0x88/0xb0
[ 65.605264] el0t_64_sync+0x16c/0x170
[ 65.605587] ---[ end trace 578e0ba07742170d ]---
Fixes: 8ac456495a33d ("[media] stk1160: Stop device and unqueue buffers when start_streaming() fails")
Signed-off-by: Dafna Hirschfeld <[email protected]>
Reviewed-by: Ezequiel Garcia <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/usb/stk1160/stk1160-core.c | 2 +-
drivers/media/usb/stk1160/stk1160-v4l.c | 10 +++++-----
drivers/media/usb/stk1160/stk1160.h | 2 +-
3 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/media/usb/stk1160/stk1160-core.c b/drivers/media/usb/stk1160/stk1160-core.c
index 4e1698f78818..ce717502ea4c 100644
--- a/drivers/media/usb/stk1160/stk1160-core.c
+++ b/drivers/media/usb/stk1160/stk1160-core.c
@@ -403,7 +403,7 @@ static void stk1160_disconnect(struct usb_interface *interface)
/* Here is the only place where isoc get released */
stk1160_uninit_isoc(dev);
- stk1160_clear_queue(dev);
+ stk1160_clear_queue(dev, VB2_BUF_STATE_ERROR);
video_unregister_device(&dev->vdev);
v4l2_device_disconnect(&dev->v4l2_dev);
diff --git a/drivers/media/usb/stk1160/stk1160-v4l.c b/drivers/media/usb/stk1160/stk1160-v4l.c
index 6a4eb616d516..1aa953469402 100644
--- a/drivers/media/usb/stk1160/stk1160-v4l.c
+++ b/drivers/media/usb/stk1160/stk1160-v4l.c
@@ -258,7 +258,7 @@ static int stk1160_start_streaming(struct stk1160 *dev)
stk1160_uninit_isoc(dev);
out_stop_hw:
usb_set_interface(dev->udev, 0, 0);
- stk1160_clear_queue(dev);
+ stk1160_clear_queue(dev, VB2_BUF_STATE_QUEUED);
mutex_unlock(&dev->v4l_lock);
@@ -306,7 +306,7 @@ static int stk1160_stop_streaming(struct stk1160 *dev)
stk1160_stop_hw(dev);
- stk1160_clear_queue(dev);
+ stk1160_clear_queue(dev, VB2_BUF_STATE_ERROR);
stk1160_dbg("streaming stopped\n");
@@ -745,7 +745,7 @@ static const struct video_device v4l_template = {
/********************************************************************/
/* Must be called with both v4l_lock and vb_queue_lock hold */
-void stk1160_clear_queue(struct stk1160 *dev)
+void stk1160_clear_queue(struct stk1160 *dev, enum vb2_buffer_state vb2_state)
{
struct stk1160_buffer *buf;
unsigned long flags;
@@ -756,7 +756,7 @@ void stk1160_clear_queue(struct stk1160 *dev)
buf = list_first_entry(&dev->avail_bufs,
struct stk1160_buffer, list);
list_del(&buf->list);
- vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
+ vb2_buffer_done(&buf->vb.vb2_buf, vb2_state);
stk1160_dbg("buffer [%p/%d] aborted\n",
buf, buf->vb.vb2_buf.index);
}
@@ -766,7 +766,7 @@ void stk1160_clear_queue(struct stk1160 *dev)
buf = dev->isoc_ctl.buf;
dev->isoc_ctl.buf = NULL;
- vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
+ vb2_buffer_done(&buf->vb.vb2_buf, vb2_state);
stk1160_dbg("buffer [%p/%d] aborted\n",
buf, buf->vb.vb2_buf.index);
}
diff --git a/drivers/media/usb/stk1160/stk1160.h b/drivers/media/usb/stk1160/stk1160.h
index a31ea1c80f25..a70963ce8753 100644
--- a/drivers/media/usb/stk1160/stk1160.h
+++ b/drivers/media/usb/stk1160/stk1160.h
@@ -166,7 +166,7 @@ struct regval {
int stk1160_vb2_setup(struct stk1160 *dev);
int stk1160_video_register(struct stk1160 *dev);
void stk1160_video_unregister(struct stk1160 *dev);
-void stk1160_clear_queue(struct stk1160 *dev);
+void stk1160_clear_queue(struct stk1160 *dev, enum vb2_buffer_state vb2_state);
/* Provided by stk1160-video.c */
int stk1160_alloc_isoc(struct stk1160 *dev);
--
2.34.1
From: Quinn Tran <[email protected]>
commit d2646eed7b19a206912f49101178cbbaa507256c upstream.
While a session is in the middle of a relogin, a late RSCN can be delivered
from switch. RSCN trigger fabric scan where the scan logic can trigger
another session login while a login is in progress. Reduce the extra
trigger to prevent multiple logins to the same session.
Link: https://lore.kernel.org/r/[email protected]
Fixes: bee8b84686c4 ("scsi: qla2xxx: Reduce redundant ADISC command for RSCNs")
Cc: [email protected]
Reviewed-by: Himanshu Madhani <[email protected]>
Signed-off-by: Quinn Tran <[email protected]>
Signed-off-by: Nilesh Javali <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/qla2xxx/qla_init.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -1560,7 +1560,8 @@ int qla24xx_fcport_handle_login(struct s
fcport->conflict, fcport->last_rscn_gen, fcport->rscn_gen,
fcport->login_gen, fcport->loop_id, fcport->scan_state);
- if (fcport->scan_state != QLA_FCPORT_FOUND)
+ if (fcport->scan_state != QLA_FCPORT_FOUND ||
+ fcport->disc_state == DSC_DELETE_PEND)
return 0;
if ((fcport->loop_id != FC_NO_LOOP_ID) &&
@@ -1581,7 +1582,7 @@ int qla24xx_fcport_handle_login(struct s
if (vha->host->active_mode == MODE_TARGET && !N2N_TOPO(vha->hw))
return 0;
- if (fcport->flags & FCF_ASYNC_SENT) {
+ if (fcport->flags & (FCF_ASYNC_SENT | FCF_ASYNC_ACTIVE)) {
set_bit(RELOGIN_NEEDED, &vha->dpc_flags);
return 0;
}
From: Chuck Lever <[email protected]>
[ Upstream commit 50719bf3442dd6cd05159e9c98d020b3919ce978 ]
These have been incorrect since the function was introduced.
A proper kerneldoc comment is added since this function, though
static, is part of an external interface.
Reported-by: Dai Ngo <[email protected]>
Signed-off-by: Chuck Lever <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/nfsd/nfs4state.c | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
diff --git a/fs/nfsd/nfs4state.c b/fs/nfsd/nfs4state.c
index d01d7929753e..84dd68091f42 100644
--- a/fs/nfsd/nfs4state.c
+++ b/fs/nfsd/nfs4state.c
@@ -4607,6 +4607,14 @@ nfsd_break_deleg_cb(struct file_lock *fl)
return ret;
}
+/**
+ * nfsd_breaker_owns_lease - Check if lease conflict was resolved
+ * @fl: Lock state to check
+ *
+ * Return values:
+ * %true: Lease conflict was resolved
+ * %false: Lease conflict was not resolved.
+ */
static bool nfsd_breaker_owns_lease(struct file_lock *fl)
{
struct nfs4_delegation *dl = fl->fl_owner;
@@ -4614,11 +4622,11 @@ static bool nfsd_breaker_owns_lease(struct file_lock *fl)
struct nfs4_client *clp;
if (!i_am_nfsd())
- return NULL;
+ return false;
rqst = kthread_data(current);
/* Note rq_prog == NFS_ACL_PROGRAM is also possible: */
if (rqst->rq_prog != NFS_PROGRAM || rqst->rq_vers < 4)
- return NULL;
+ return false;
clp = *(rqst->rq_lease_breaker);
return dl->dl_stid.sc_client == clp;
}
--
2.34.1
From: Vijay Balakrishna <[email protected]>
commit 031495635b4668f94e964e037ca93d0d38bfde58 upstream.
The following patches resulted in deferring crash kernel reservation to
mem_init(), mainly aimed at platforms with DMA memory zones (no IOMMU),
in particular Raspberry Pi 4.
commit 1a8e1cef7603 ("arm64: use both ZONE_DMA and ZONE_DMA32")
commit 8424ecdde7df ("arm64: mm: Set ZONE_DMA size based on devicetree's dma-ranges")
commit 0a30c53573b0 ("arm64: mm: Move reserve_crashkernel() into mem_init()")
commit 2687275a5843 ("arm64: Force NO_BLOCK_MAPPINGS if crashkernel reservation is required")
Above changes introduced boot slowdown due to linear map creation for
all the memory banks with NO_BLOCK_MAPPINGS, see discussion[1]. The proposed
changes restore crash kernel reservation to earlier behavior thus avoids
slow boot, particularly for platforms with IOMMU (no DMA memory zones).
Tested changes to confirm no ~150ms boot slowdown on our SoC with IOMMU
and 8GB memory. Also tested with ZONE_DMA and/or ZONE_DMA32 configs to confirm
no regression to deferring scheme of crash kernel memory reservation.
In both cases successfully collected kernel crash dump.
[1] https://lore.kernel.org/all/[email protected]/
Signed-off-by: Vijay Balakrishna <[email protected]>
Cc: [email protected]
Reviewed-by: Pasha Tatashin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
[will: Add #ifdef CONFIG_KEXEC_CORE guards to fix 'crashk_res' references in allnoconfig build]
Signed-off-by: Will Deacon <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm64/mm/init.c | 36 ++++++++++++++++++++++++++++++++----
arch/arm64/mm/mmu.c | 32 +++++++++++++++++++++++++++++++-
2 files changed, 63 insertions(+), 5 deletions(-)
--- a/arch/arm64/mm/init.c
+++ b/arch/arm64/mm/init.c
@@ -58,8 +58,34 @@ EXPORT_SYMBOL(memstart_addr);
* unless restricted on specific platforms (e.g. 30-bit on Raspberry Pi 4).
* In such case, ZONE_DMA32 covers the rest of the 32-bit addressable memory,
* otherwise it is empty.
+ *
+ * Memory reservation for crash kernel either done early or deferred
+ * depending on DMA memory zones configs (ZONE_DMA) --
+ *
+ * In absence of ZONE_DMA configs arm64_dma_phys_limit initialized
+ * here instead of max_zone_phys(). This lets early reservation of
+ * crash kernel memory which has a dependency on arm64_dma_phys_limit.
+ * Reserving memory early for crash kernel allows linear creation of block
+ * mappings (greater than page-granularity) for all the memory bank rangs.
+ * In this scheme a comparatively quicker boot is observed.
+ *
+ * If ZONE_DMA configs are defined, crash kernel memory reservation
+ * is delayed until DMA zone memory range size initilazation performed in
+ * zone_sizes_init(). The defer is necessary to steer clear of DMA zone
+ * memory range to avoid overlap allocation. So crash kernel memory boundaries
+ * are not known when mapping all bank memory ranges, which otherwise means
+ * not possible to exclude crash kernel range from creating block mappings
+ * so page-granularity mappings are created for the entire memory range.
+ * Hence a slightly slower boot is observed.
+ *
+ * Note: Page-granularity mapppings are necessary for crash kernel memory
+ * range for shrinking its size via /sys/kernel/kexec_crash_size interface.
*/
-phys_addr_t arm64_dma_phys_limit __ro_after_init;
+#if IS_ENABLED(CONFIG_ZONE_DMA) || IS_ENABLED(CONFIG_ZONE_DMA32)
+phys_addr_t __ro_after_init arm64_dma_phys_limit;
+#else
+phys_addr_t __ro_after_init arm64_dma_phys_limit = PHYS_MASK + 1;
+#endif
#ifdef CONFIG_KEXEC_CORE
/*
@@ -210,8 +236,6 @@ static void __init zone_sizes_init(unsig
if (!arm64_dma_phys_limit)
arm64_dma_phys_limit = dma32_phys_limit;
#endif
- if (!arm64_dma_phys_limit)
- arm64_dma_phys_limit = PHYS_MASK + 1;
max_zone_pfns[ZONE_NORMAL] = max;
free_area_init(max_zone_pfns);
@@ -407,6 +431,9 @@ void __init arm64_memblock_init(void)
reserve_elfcorehdr();
+ if (!IS_ENABLED(CONFIG_ZONE_DMA) && !IS_ENABLED(CONFIG_ZONE_DMA32))
+ reserve_crashkernel();
+
high_memory = __va(memblock_end_of_DRAM() - 1) + 1;
}
@@ -451,7 +478,8 @@ void __init bootmem_init(void)
* request_standard_resources() depends on crashkernel's memory being
* reserved, so do it here.
*/
- reserve_crashkernel();
+ if (IS_ENABLED(CONFIG_ZONE_DMA) || IS_ENABLED(CONFIG_ZONE_DMA32))
+ reserve_crashkernel();
memblock_dump_all();
}
--- a/arch/arm64/mm/mmu.c
+++ b/arch/arm64/mm/mmu.c
@@ -501,7 +501,7 @@ static void __init map_mem(pgd_t *pgdp)
int flags = 0;
u64 i;
- if (rodata_full || crash_mem_map || debug_pagealloc_enabled())
+ if (rodata_full || debug_pagealloc_enabled())
flags = NO_BLOCK_MAPPINGS | NO_CONT_MAPPINGS;
/*
@@ -512,6 +512,17 @@ static void __init map_mem(pgd_t *pgdp)
*/
memblock_mark_nomap(kernel_start, kernel_end - kernel_start);
+#ifdef CONFIG_KEXEC_CORE
+ if (crash_mem_map) {
+ if (IS_ENABLED(CONFIG_ZONE_DMA) ||
+ IS_ENABLED(CONFIG_ZONE_DMA32))
+ flags |= NO_BLOCK_MAPPINGS | NO_CONT_MAPPINGS;
+ else if (crashk_res.end)
+ memblock_mark_nomap(crashk_res.start,
+ resource_size(&crashk_res));
+ }
+#endif
+
/* map all the memory banks */
for_each_mem_range(i, &start, &end) {
if (start >= end)
@@ -538,6 +549,25 @@ static void __init map_mem(pgd_t *pgdp)
__map_memblock(pgdp, kernel_start, kernel_end,
PAGE_KERNEL, NO_CONT_MAPPINGS);
memblock_clear_nomap(kernel_start, kernel_end - kernel_start);
+
+ /*
+ * Use page-level mappings here so that we can shrink the region
+ * in page granularity and put back unused memory to buddy system
+ * through /sys/kernel/kexec_crash_size interface.
+ */
+#ifdef CONFIG_KEXEC_CORE
+ if (crash_mem_map &&
+ !IS_ENABLED(CONFIG_ZONE_DMA) && !IS_ENABLED(CONFIG_ZONE_DMA32)) {
+ if (crashk_res.end) {
+ __map_memblock(pgdp, crashk_res.start,
+ crashk_res.end + 1,
+ PAGE_KERNEL,
+ NO_BLOCK_MAPPINGS | NO_CONT_MAPPINGS);
+ memblock_clear_nomap(crashk_res.start,
+ resource_size(&crashk_res));
+ }
+ }
+#endif
}
void mark_rodata_ro(void)
From: Kai-Heng Feng <[email protected]>
commit f30741cded62f87bb4b1cc58bc627f076abcaba8 upstream.
Commit 5aec98913095 ("ALSA: hda/realtek - ALC236 headset MIC recording
issue") is to solve recording issue met on AL236, by matching codec
variant ALC269_TYPE_ALC257 and ALC269_TYPE_ALC256.
This match can be too broad and Mi Notebook Pro 2020 is broken by the
patch.
Instead, use codec ID to be narrow down the scope, in order to make
ALC256 unaffected.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=215484
Fixes: 5aec98913095 ("ALSA: hda/realtek - ALC236 headset MIC recording issue")
Reported-by: kernel test robot <[email protected]>
Reported-by: Dan Carpenter <[email protected]>
Cc: <[email protected]>
Signed-off-by: Kai-Heng Feng <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/pci/hda/patch_realtek.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -3615,8 +3615,8 @@ static void alc256_shutup(struct hda_cod
/* If disable 3k pulldown control for alc257, the Mic detection will not work correctly
* when booting with headset plugged. So skip setting it for the codec alc257
*/
- if (spec->codec_variant != ALC269_TYPE_ALC257 &&
- spec->codec_variant != ALC269_TYPE_ALC256)
+ if (codec->core.vendor_id != 0x10ec0236 &&
+ codec->core.vendor_id != 0x10ec0257)
alc_update_coef_idx(codec, 0x46, 0, 3 << 12);
if (!spec->no_shutup_pins)
From: Paulo Alcantara <[email protected]>
commit d6f5e358452479fa8a773b5c6ccc9e4ec5a20880 upstream.
When calling smb2_ioctl_query_info() with invalid
smb_query_info::flags, a NULL ptr dereference is triggered when trying
to kfree() uninitialised rqst[n].rq_iov array.
This also fixes leaked paths that are created in SMB2_open_init()
which required SMB2_open_free() to properly free them.
Here is a small C reproducer that triggers it
#include <stdio.h>
#include <stdlib.h>
#include <stdint.h>
#include <unistd.h>
#include <fcntl.h>
#include <sys/ioctl.h>
#define die(s) perror(s), exit(1)
#define QUERY_INFO 0xc018cf07
int main(int argc, char *argv[])
{
int fd;
if (argc < 2)
exit(1);
fd = open(argv[1], O_RDONLY);
if (fd == -1)
die("open");
if (ioctl(fd, QUERY_INFO, (uint32_t[]) { 0, 0, 0, 4, 0, 0}) == -1)
die("ioctl");
close(fd);
return 0;
}
mount.cifs //srv/share /mnt -o ...
gcc repro.c && ./a.out /mnt/f0
[ 1832.124468] CIFS: VFS: \\w22-dc.zelda.test\test Invalid passthru query flags: 0x4
[ 1832.125043] general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN NOPTI
[ 1832.125764] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
[ 1832.126241] CPU: 3 PID: 1133 Comm: a.out Not tainted 5.17.0-rc8 #2
[ 1832.126630] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.15.0-0-g2dd4b9b-rebuilt.opensuse.org 04/01/2014
[ 1832.127322] RIP: 0010:smb2_ioctl_query_info+0x7a3/0xe30 [cifs]
[ 1832.127749] Code: 00 00 00 fc ff df 48 c1 ea 03 80 3c 02 00 0f 85 6c 05 00 00 48 b8 00 00 00 00 00 fc ff df 4d 8b 74 24 28 4c 89 f2 48 c1 ea 03 <80> 3c 02 00 0f 85 cb 04 00 00 49 8b 3e e8 bb fc fa ff 48 89 da 48
[ 1832.128911] RSP: 0018:ffffc90000957b08 EFLAGS: 00010256
[ 1832.129243] RAX: dffffc0000000000 RBX: ffff888117e9b850 RCX: ffffffffa020580d
[ 1832.129691] RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffffa043a2c0
[ 1832.130137] RBP: ffff888117e9b878 R08: 0000000000000001 R09: 0000000000000003
[ 1832.130585] R10: fffffbfff4087458 R11: 0000000000000001 R12: ffff888117e9b800
[ 1832.131037] R13: 00000000ffffffea R14: 0000000000000000 R15: ffff888117e9b8a8
[ 1832.131485] FS: 00007fcee9900740(0000) GS:ffff888151a00000(0000) knlGS:0000000000000000
[ 1832.131993] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1832.132354] CR2: 00007fcee9a1ef5e CR3: 0000000114cd2000 CR4: 0000000000350ee0
[ 1832.132801] Call Trace:
[ 1832.132962] <TASK>
[ 1832.133104] ? smb2_query_reparse_tag+0x890/0x890 [cifs]
[ 1832.133489] ? cifs_mapchar+0x460/0x460 [cifs]
[ 1832.133822] ? rcu_read_lock_sched_held+0x3f/0x70
[ 1832.134125] ? cifs_strndup_to_utf16+0x15b/0x250 [cifs]
[ 1832.134502] ? lock_downgrade+0x6f0/0x6f0
[ 1832.134760] ? cifs_convert_path_to_utf16+0x198/0x220 [cifs]
[ 1832.135170] ? smb2_check_message+0x1080/0x1080 [cifs]
[ 1832.135545] cifs_ioctl+0x1577/0x3320 [cifs]
[ 1832.135864] ? lock_downgrade+0x6f0/0x6f0
[ 1832.136125] ? cifs_readdir+0x2e60/0x2e60 [cifs]
[ 1832.136468] ? rcu_read_lock_sched_held+0x3f/0x70
[ 1832.136769] ? __rseq_handle_notify_resume+0x80b/0xbe0
[ 1832.137096] ? __up_read+0x192/0x710
[ 1832.137327] ? __ia32_sys_rseq+0xf0/0xf0
[ 1832.137578] ? __x64_sys_openat+0x11f/0x1d0
[ 1832.137850] __x64_sys_ioctl+0x127/0x190
[ 1832.138103] do_syscall_64+0x3b/0x90
[ 1832.138378] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 1832.138702] RIP: 0033:0x7fcee9a253df
[ 1832.138937] Code: 00 48 89 44 24 18 31 c0 48 8d 44 24 60 c7 04 24 10 00 00 00 48 89 44 24 08 48 8d 44 24 20 48 89 44 24 10 b8 10 00 00 00 0f 05 <41> 89 c0 3d 00 f0 ff ff 77 1f 48 8b 44 24 18 64 48 2b 04 25 28 00
[ 1832.140107] RSP: 002b:00007ffeba94a8a0 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[ 1832.140606] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fcee9a253df
[ 1832.141058] RDX: 00007ffeba94a910 RSI: 00000000c018cf07 RDI: 0000000000000003
[ 1832.141503] RBP: 00007ffeba94a930 R08: 00007fcee9b24db0 R09: 00007fcee9b45c4e
[ 1832.141948] R10: 00007fcee9918d40 R11: 0000000000000246 R12: 00007ffeba94aa48
[ 1832.142396] R13: 0000000000401176 R14: 0000000000403df8 R15: 00007fcee9b78000
[ 1832.142851] </TASK>
[ 1832.142994] Modules linked in: cifs cifs_arc4 cifs_md4 bpf_preload [last unloaded: cifs]
Cc: [email protected]
Signed-off-by: Paulo Alcantara (SUSE) <[email protected]>
Signed-off-by: Steve French <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/cifs/smb2ops.c | 124 ++++++++++++++++++++++++++++--------------------------
1 file changed, 65 insertions(+), 59 deletions(-)
--- a/fs/cifs/smb2ops.c
+++ b/fs/cifs/smb2ops.c
@@ -1526,6 +1526,7 @@ smb2_ioctl_query_info(const unsigned int
unsigned int size[2];
void *data[2];
int create_options = is_dir ? CREATE_NOT_FILE : CREATE_NOT_DIR;
+ void (*free_req1_func)(struct smb_rqst *r);
vars = kzalloc(sizeof(*vars), GFP_ATOMIC);
if (vars == NULL)
@@ -1535,17 +1536,18 @@ smb2_ioctl_query_info(const unsigned int
resp_buftype[0] = resp_buftype[1] = resp_buftype[2] = CIFS_NO_BUFFER;
- if (copy_from_user(&qi, arg, sizeof(struct smb_query_info)))
- goto e_fault;
-
+ if (copy_from_user(&qi, arg, sizeof(struct smb_query_info))) {
+ rc = -EFAULT;
+ goto free_vars;
+ }
if (qi.output_buffer_length > 1024) {
- kfree(vars);
- return -EINVAL;
+ rc = -EINVAL;
+ goto free_vars;
}
if (!ses || !server) {
- kfree(vars);
- return -EIO;
+ rc = -EIO;
+ goto free_vars;
}
if (smb3_encryption_required(tcon))
@@ -1554,8 +1556,8 @@ smb2_ioctl_query_info(const unsigned int
if (qi.output_buffer_length) {
buffer = memdup_user(arg + sizeof(struct smb_query_info), qi.output_buffer_length);
if (IS_ERR(buffer)) {
- kfree(vars);
- return PTR_ERR(buffer);
+ rc = PTR_ERR(buffer);
+ goto free_vars;
}
}
@@ -1594,48 +1596,45 @@ smb2_ioctl_query_info(const unsigned int
rc = SMB2_open_init(tcon, server,
&rqst[0], &oplock, &oparms, path);
if (rc)
- goto iqinf_exit;
+ goto free_output_buffer;
smb2_set_next_command(tcon, &rqst[0]);
/* Query */
if (qi.flags & PASSTHRU_FSCTL) {
/* Can eventually relax perm check since server enforces too */
- if (!capable(CAP_SYS_ADMIN))
+ if (!capable(CAP_SYS_ADMIN)) {
rc = -EPERM;
- else {
- rqst[1].rq_iov = &vars->io_iov[0];
- rqst[1].rq_nvec = SMB2_IOCTL_IOV_SIZE;
-
- rc = SMB2_ioctl_init(tcon, server,
- &rqst[1],
- COMPOUND_FID, COMPOUND_FID,
- qi.info_type, true, buffer,
- qi.output_buffer_length,
- CIFSMaxBufSize -
- MAX_SMB2_CREATE_RESPONSE_SIZE -
- MAX_SMB2_CLOSE_RESPONSE_SIZE);
+ goto free_open_req;
}
+ rqst[1].rq_iov = &vars->io_iov[0];
+ rqst[1].rq_nvec = SMB2_IOCTL_IOV_SIZE;
+
+ rc = SMB2_ioctl_init(tcon, server, &rqst[1], COMPOUND_FID, COMPOUND_FID,
+ qi.info_type, true, buffer, qi.output_buffer_length,
+ CIFSMaxBufSize - MAX_SMB2_CREATE_RESPONSE_SIZE -
+ MAX_SMB2_CLOSE_RESPONSE_SIZE);
+ free_req1_func = SMB2_ioctl_free;
} else if (qi.flags == PASSTHRU_SET_INFO) {
/* Can eventually relax perm check since server enforces too */
- if (!capable(CAP_SYS_ADMIN))
+ if (!capable(CAP_SYS_ADMIN)) {
rc = -EPERM;
- else if (qi.output_buffer_length < 8)
+ goto free_open_req;
+ }
+ if (qi.output_buffer_length < 8) {
rc = -EINVAL;
- else {
- rqst[1].rq_iov = &vars->si_iov[0];
- rqst[1].rq_nvec = 1;
-
- /* MS-FSCC 2.4.13 FileEndOfFileInformation */
- size[0] = 8;
- data[0] = buffer;
-
- rc = SMB2_set_info_init(tcon, server,
- &rqst[1],
- COMPOUND_FID, COMPOUND_FID,
- current->tgid,
- FILE_END_OF_FILE_INFORMATION,
- SMB2_O_INFO_FILE, 0, data, size);
+ goto free_open_req;
}
+ rqst[1].rq_iov = &vars->si_iov[0];
+ rqst[1].rq_nvec = 1;
+
+ /* MS-FSCC 2.4.13 FileEndOfFileInformation */
+ size[0] = 8;
+ data[0] = buffer;
+
+ rc = SMB2_set_info_init(tcon, server, &rqst[1], COMPOUND_FID, COMPOUND_FID,
+ current->tgid, FILE_END_OF_FILE_INFORMATION,
+ SMB2_O_INFO_FILE, 0, data, size);
+ free_req1_func = SMB2_set_info_free;
} else if (qi.flags == PASSTHRU_QUERY_INFO) {
rqst[1].rq_iov = &vars->qi_iov[0];
rqst[1].rq_nvec = 1;
@@ -1646,6 +1645,7 @@ smb2_ioctl_query_info(const unsigned int
qi.info_type, qi.additional_information,
qi.input_buffer_length,
qi.output_buffer_length, buffer);
+ free_req1_func = SMB2_query_info_free;
} else { /* unknown flags */
cifs_tcon_dbg(VFS, "Invalid passthru query flags: 0x%x\n",
qi.flags);
@@ -1653,7 +1653,7 @@ smb2_ioctl_query_info(const unsigned int
}
if (rc)
- goto iqinf_exit;
+ goto free_open_req;
smb2_set_next_command(tcon, &rqst[1]);
smb2_set_related(&rqst[1]);
@@ -1664,14 +1664,14 @@ smb2_ioctl_query_info(const unsigned int
rc = SMB2_close_init(tcon, server,
&rqst[2], COMPOUND_FID, COMPOUND_FID, false);
if (rc)
- goto iqinf_exit;
+ goto free_req_1;
smb2_set_related(&rqst[2]);
rc = compound_send_recv(xid, ses, server,
flags, 3, rqst,
resp_buftype, rsp_iov);
if (rc)
- goto iqinf_exit;
+ goto out;
/* No need to bump num_remote_opens since handle immediately closed */
if (qi.flags & PASSTHRU_FSCTL) {
@@ -1681,18 +1681,22 @@ smb2_ioctl_query_info(const unsigned int
qi.input_buffer_length = le32_to_cpu(io_rsp->OutputCount);
if (qi.input_buffer_length > 0 &&
le32_to_cpu(io_rsp->OutputOffset) + qi.input_buffer_length
- > rsp_iov[1].iov_len)
- goto e_fault;
+ > rsp_iov[1].iov_len) {
+ rc = -EFAULT;
+ goto out;
+ }
if (copy_to_user(&pqi->input_buffer_length,
&qi.input_buffer_length,
- sizeof(qi.input_buffer_length)))
- goto e_fault;
+ sizeof(qi.input_buffer_length))) {
+ rc = -EFAULT;
+ goto out;
+ }
if (copy_to_user((void __user *)pqi + sizeof(struct smb_query_info),
(const void *)io_rsp + le32_to_cpu(io_rsp->OutputOffset),
qi.input_buffer_length))
- goto e_fault;
+ rc = -EFAULT;
} else {
pqi = (struct smb_query_info __user *)arg;
qi_rsp = (struct smb2_query_info_rsp *)rsp_iov[1].iov_base;
@@ -1700,28 +1704,30 @@ smb2_ioctl_query_info(const unsigned int
qi.input_buffer_length = le32_to_cpu(qi_rsp->OutputBufferLength);
if (copy_to_user(&pqi->input_buffer_length,
&qi.input_buffer_length,
- sizeof(qi.input_buffer_length)))
- goto e_fault;
+ sizeof(qi.input_buffer_length))) {
+ rc = -EFAULT;
+ goto out;
+ }
if (copy_to_user(pqi + 1, qi_rsp->Buffer,
qi.input_buffer_length))
- goto e_fault;
+ rc = -EFAULT;
}
- iqinf_exit:
- cifs_small_buf_release(rqst[0].rq_iov[0].iov_base);
- cifs_small_buf_release(rqst[1].rq_iov[0].iov_base);
- cifs_small_buf_release(rqst[2].rq_iov[0].iov_base);
+out:
free_rsp_buf(resp_buftype[0], rsp_iov[0].iov_base);
free_rsp_buf(resp_buftype[1], rsp_iov[1].iov_base);
free_rsp_buf(resp_buftype[2], rsp_iov[2].iov_base);
- kfree(vars);
+ SMB2_close_free(&rqst[2]);
+free_req_1:
+ free_req1_func(&rqst[1]);
+free_open_req:
+ SMB2_open_free(&rqst[0]);
+free_output_buffer:
kfree(buffer);
+free_vars:
+ kfree(vars);
return rc;
-
-e_fault:
- rc = -EFAULT;
- goto iqinf_exit;
}
static ssize_t
From: Quinn Tran <[email protected]>
commit 6a45c8e137d4e2c72eecf1ac7cf64f2fdfcead99 upstream.
User experienced some of the LUN failed to get rediscovered after long
cable pull test. The issue is triggered by a race condition between driver
setting session online state vs starting the LUN scan process at the same
time. Current code set the online state after notifying the session is
available. In this case, trigger to start the LUN scan process happened
before driver could set the session in online state. LUN scan ends up with
failure due to the session online check was failing.
Set the online state before reporting of the availability of the session.
Link: https://lore.kernel.org/r/[email protected]
Fixes: aecf043443d3 ("scsi: qla2xxx: Fix Remote port registration")
Cc: [email protected]
Reviewed-by: Himanshu Madhani <[email protected]>
Signed-off-by: Quinn Tran <[email protected]>
Signed-off-by: Nilesh Javali <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/qla2xxx/qla_init.c | 5 +++--
drivers/scsi/qla2xxx/qla_nvme.c | 5 +++++
2 files changed, 8 insertions(+), 2 deletions(-)
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -5531,6 +5531,8 @@ qla2x00_reg_remote_port(scsi_qla_host_t
if (atomic_read(&fcport->state) == FCS_ONLINE)
return;
+ qla2x00_set_fcport_state(fcport, FCS_ONLINE);
+
rport_ids.node_name = wwn_to_u64(fcport->node_name);
rport_ids.port_name = wwn_to_u64(fcport->port_name);
rport_ids.port_id = fcport->d_id.b.domain << 16 |
@@ -5631,6 +5633,7 @@ qla2x00_update_fcport(scsi_qla_host_t *v
qla2x00_reg_remote_port(vha, fcport);
break;
case MODE_TARGET:
+ qla2x00_set_fcport_state(fcport, FCS_ONLINE);
if (!vha->vha_tgt.qla_tgt->tgt_stop &&
!vha->vha_tgt.qla_tgt->tgt_stopped)
qlt_fc_port_added(vha, fcport);
@@ -5645,8 +5648,6 @@ qla2x00_update_fcport(scsi_qla_host_t *v
break;
}
- qla2x00_set_fcport_state(fcport, FCS_ONLINE);
-
if (IS_IIDMA_CAPABLE(vha->hw) && vha->hw->flags.gpsc_supported) {
if (fcport->id_changed) {
fcport->id_changed = 0;
--- a/drivers/scsi/qla2xxx/qla_nvme.c
+++ b/drivers/scsi/qla2xxx/qla_nvme.c
@@ -35,6 +35,11 @@ int qla_nvme_register_remote(struct scsi
(fcport->nvme_flag & NVME_FLAG_REGISTERED))
return 0;
+ if (atomic_read(&fcport->state) == FCS_ONLINE)
+ return 0;
+
+ qla2x00_set_fcport_state(fcport, FCS_ONLINE);
+
fcport->nvme_flag &= ~NVME_FLAG_RESETTING;
memset(&req, 0, sizeof(struct nvme_fc_port_info));
On Tue, Apr 5, 2022, at 3:24 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.110 release.
> There are 599 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 07 Apr 2022 07:01:33 +0000.
> Anything received after that time might be too late.
5.10.110-rc1 compiled and booted with no errors or regressions on my x86_64 test system.
Tested-by: Slade Watkins <[email protected]>
Cheers,
Slade
From: Jiasheng Jiang <[email protected]>
[ Upstream commit 38b16d6cfe54c820848bcfc999bc5e8a7da1cefb ]
As the potential failure of the allocation, kmemdup() may return NULL.
Then, 'bin_attr_data_vault.private' will be NULL, but
'bin_attr_data_vault.size' is not 0, which is not consistent.
Therefore, it is better to check the return value of kmemdup() to
avoid the confusion.
Fixes: 0ba13c763aac ("thermal/int340x_thermal: Export GDDV")
Signed-off-by: Jiasheng Jiang <[email protected]>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/thermal/intel/int340x_thermal/int3400_thermal.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/thermal/intel/int340x_thermal/int3400_thermal.c b/drivers/thermal/intel/int340x_thermal/int3400_thermal.c
index 793d7b58fc65..55f5bc7cd20b 100644
--- a/drivers/thermal/intel/int340x_thermal/int3400_thermal.c
+++ b/drivers/thermal/intel/int340x_thermal/int3400_thermal.c
@@ -466,6 +466,11 @@ static void int3400_setup_gddv(struct int3400_thermal_priv *priv)
priv->data_vault = kmemdup(obj->package.elements[0].buffer.pointer,
obj->package.elements[0].buffer.length,
GFP_KERNEL);
+ if (!priv->data_vault) {
+ kfree(buffer.pointer);
+ return;
+ }
+
bin_attr_data_vault.private = priv->data_vault;
bin_attr_data_vault.size = obj->package.elements[0].buffer.length;
kfree(buffer.pointer);
--
2.34.1
From: Petr Vorel <[email protected]>
[ Upstream commit 647d41d3952d726d4ae49e853a9eff68ebad3b3f ]
vmx-crypto module depends on CRYPTO_AES, CRYPTO_CBC, CRYPTO_CTR or
CRYPTO_XTS, thus add them.
These dependencies are likely to be enabled, but if
CRYPTO_DEV_VMX=y && !CRYPTO_MANAGER_DISABLE_TESTS
and either of CRYPTO_AES, CRYPTO_CBC, CRYPTO_CTR or CRYPTO_XTS is built
as module or disabled, alg_test() from crypto/testmgr.c complains during
boot about failing to allocate the generic fallback implementations
(2 == ENOENT):
[ 0.540953] Failed to allocate xts(aes) fallback: -2
[ 0.541014] alg: skcipher: failed to allocate transform for p8_aes_xts: -2
[ 0.541120] alg: self-tests for p8_aes_xts (xts(aes)) failed (rc=-2)
[ 0.544440] Failed to allocate ctr(aes) fallback: -2
[ 0.544497] alg: skcipher: failed to allocate transform for p8_aes_ctr: -2
[ 0.544603] alg: self-tests for p8_aes_ctr (ctr(aes)) failed (rc=-2)
[ 0.547992] Failed to allocate cbc(aes) fallback: -2
[ 0.548052] alg: skcipher: failed to allocate transform for p8_aes_cbc: -2
[ 0.548156] alg: self-tests for p8_aes_cbc (cbc(aes)) failed (rc=-2)
[ 0.550745] Failed to allocate transformation for 'aes': -2
[ 0.550801] alg: cipher: Failed to load transform for p8_aes: -2
[ 0.550892] alg: self-tests for p8_aes (aes) failed (rc=-2)
Fixes: c07f5d3da643 ("crypto: vmx - Adding support for XTS")
Fixes: d2e3ae6f3aba ("crypto: vmx - Enabling VMX module for PPC64")
Suggested-by: Nicolai Stange <[email protected]>
Signed-off-by: Petr Vorel <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/crypto/vmx/Kconfig | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/crypto/vmx/Kconfig b/drivers/crypto/vmx/Kconfig
index c85fab7ef0bd..b2c28b87f14b 100644
--- a/drivers/crypto/vmx/Kconfig
+++ b/drivers/crypto/vmx/Kconfig
@@ -2,7 +2,11 @@
config CRYPTO_DEV_VMX_ENCRYPT
tristate "Encryption acceleration support on P8 CPU"
depends on CRYPTO_DEV_VMX
+ select CRYPTO_AES
+ select CRYPTO_CBC
+ select CRYPTO_CTR
select CRYPTO_GHASH
+ select CRYPTO_XTS
default m
help
Support for VMX cryptographic acceleration instructions on Power8 CPU.
--
2.34.1
From: Randy Dunlap <[email protected]>
[ Upstream commit f3303ff649dbf7dcdc6a6e1a922235b12b3028f4 ]
__setup() handlers should return 1 to indicate that the boot option
has been handled. Returning 0 causes a boot option to be listed in
the Unknown kernel command line parameters and also added to init's
arg list (if no '=' sign) or environment list (if of the form 'a=b').
Unknown kernel command line parameters "erst_disable
bert_disable hest_disable BOOT_IMAGE=/boot/bzImage-517rc6", will be
passed to user space.
Run /sbin/init as init process
with arguments:
/sbin/init
erst_disable
bert_disable
hest_disable
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/boot/bzImage-517rc6
Fixes: a3e2acc5e37b ("ACPI / APEI: Add Boot Error Record Table (BERT) support")
Fixes: a08f82d08053 ("ACPI, APEI, Error Record Serialization Table (ERST) support")
Fixes: 9dc966641677 ("ACPI, APEI, HEST table parsing")
Signed-off-by: Randy Dunlap <[email protected]>
Reported-by: Igor Zhbanov <[email protected]>
Link: lore.kernel.org/r/[email protected]
Reviewed-by: "Huang, Ying" <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/acpi/apei/bert.c | 2 +-
drivers/acpi/apei/erst.c | 2 +-
drivers/acpi/apei/hest.c | 2 +-
3 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/acpi/apei/bert.c b/drivers/acpi/apei/bert.c
index 19e50fcbf4d6..86211422f4ee 100644
--- a/drivers/acpi/apei/bert.c
+++ b/drivers/acpi/apei/bert.c
@@ -77,7 +77,7 @@ static int __init setup_bert_disable(char *str)
{
bert_disable = 1;
- return 0;
+ return 1;
}
__setup("bert_disable", setup_bert_disable);
diff --git a/drivers/acpi/apei/erst.c b/drivers/acpi/apei/erst.c
index 2e0b0fcad960..83efb52a3f31 100644
--- a/drivers/acpi/apei/erst.c
+++ b/drivers/acpi/apei/erst.c
@@ -891,7 +891,7 @@ EXPORT_SYMBOL_GPL(erst_clear);
static int __init setup_erst_disable(char *str)
{
erst_disable = 1;
- return 0;
+ return 1;
}
__setup("erst_disable", setup_erst_disable);
diff --git a/drivers/acpi/apei/hest.c b/drivers/acpi/apei/hest.c
index 6e980fe16772..7bf48c2776fb 100644
--- a/drivers/acpi/apei/hest.c
+++ b/drivers/acpi/apei/hest.c
@@ -219,7 +219,7 @@ static int __init hest_ghes_dev_register(unsigned int ghes_count)
static int __init setup_hest_disable(char *str)
{
hest_disable = HEST_DISABLED;
- return 0;
+ return 1;
}
__setup("hest_disable", setup_hest_disable);
--
2.34.1
From: Zhou Qingyang <[email protected]>
[ Upstream commit 588a70177df3b1777484267584ef38ab2ca899a2 ]
In amdgpu_dm_connector_add_common_modes(), amdgpu_dm_create_common_mode()
is assigned to mode and is passed to drm_mode_probed_add() directly after
that. drm_mode_probed_add() passes &mode->head to list_add_tail(), and
there is a dereference of it in list_add_tail() without recoveries, which
could lead to NULL pointer dereference on failure of
amdgpu_dm_create_common_mode().
Fix this by adding a NULL check of mode.
This bug was found by a static analyzer.
Builds with 'make allyesconfig' show no new warnings,
and our static analyzer no longer warns about this code.
Fixes: e7b07ceef2a6 ("drm/amd/display: Merge amdgpu_dm_types and amdgpu_dm")
Signed-off-by: Zhou Qingyang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index 6c8f141103da..b65364695219 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -6396,6 +6396,9 @@ static void amdgpu_dm_connector_add_common_modes(struct drm_encoder *encoder,
mode = amdgpu_dm_create_common_mode(encoder,
common_modes[i].name, common_modes[i].w,
common_modes[i].h);
+ if (!mode)
+ continue;
+
drm_mode_probed_add(connector, mode);
amdgpu_dm_connector->num_modes++;
}
--
2.34.1
From: Miquel Raynal <[email protected]>
commit 90c204d3195a795f77f5bce767e311dd1c59ca17 upstream.
The interrupt property is not mandatory at all, this property should not
be part of the required properties list, so move it into the optional
properties list.
Fixes: 326e5c8d4a87 ("dt-binding: spi: Document Macronix controller bindings")
Signed-off-by: Miquel Raynal <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Reviewed-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
Documentation/devicetree/bindings/spi/spi-mxic.txt | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/Documentation/devicetree/bindings/spi/spi-mxic.txt
+++ b/Documentation/devicetree/bindings/spi/spi-mxic.txt
@@ -8,11 +8,13 @@ Required properties:
- reg: should contain 2 entries, one for the registers and one for the direct
mapping area
- reg-names: should contain "regs" and "dirmap"
-- interrupts: interrupt line connected to the SPI controller
- clock-names: should contain "ps_clk", "send_clk" and "send_dly_clk"
- clocks: should contain 3 entries for the "ps_clk", "send_clk" and
"send_dly_clk" clocks
+Optional properties:
+- interrupts: interrupt line connected to the SPI controller
+
Example:
spi@43c30000 {
From: Jiasheng Jiang <[email protected]>
[ Upstream commit de2c6f98817fa5decb9b7d3b3a8a3ab864c10588 ]
There is one call trace that snd_soc_register_card()
->snd_soc_bind_card()->soc_init_pcm_runtime()
->snd_soc_dai_compress_new()->snd_soc_new_compress().
In the trace the 'codec_dai' transfers from card->dai_link,
and we can see from the snd_soc_add_pcm_runtime() in
snd_soc_bind_card() that, if value of card->dai_link->num_codecs
is 0, then 'codec_dai' could be null pointer caused
by index out of bound in 'asoc_rtd_to_codec(rtd, 0)'.
And snd_soc_register_card() is called by various platforms.
Therefore, it is better to add the check in the case of misusing.
And because 'cpu_dai' has already checked in soc_init_pcm_runtime(),
there is no need to check again.
Adding the check as follow, then if 'codec_dai' is null,
snd_soc_new_compress() will not pass through the check
'if (playback + capture != 1)', avoiding the leftover use of
'codec_dai'.
Fixes: 467fece ("ASoC: soc-dai: move snd_soc_dai_stream_valid() to soc-dai.c")
Signed-off-by: Jiasheng Jiang <[email protected]>
Reported-by: kernel test robot <[email protected]>
Reported-by: Dan Carpenter <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/soc-compress.c | 14 ++++++++------
1 file changed, 8 insertions(+), 6 deletions(-)
diff --git a/sound/soc/soc-compress.c b/sound/soc/soc-compress.c
index 3a6a60215e81..5a1702d926ae 100644
--- a/sound/soc/soc-compress.c
+++ b/sound/soc/soc-compress.c
@@ -767,12 +767,14 @@ int snd_soc_new_compress(struct snd_soc_pcm_runtime *rtd, int num)
}
/* check client and interface hw capabilities */
- if (snd_soc_dai_stream_valid(codec_dai, SNDRV_PCM_STREAM_PLAYBACK) &&
- snd_soc_dai_stream_valid(cpu_dai, SNDRV_PCM_STREAM_PLAYBACK))
- playback = 1;
- if (snd_soc_dai_stream_valid(codec_dai, SNDRV_PCM_STREAM_CAPTURE) &&
- snd_soc_dai_stream_valid(cpu_dai, SNDRV_PCM_STREAM_CAPTURE))
- capture = 1;
+ if (codec_dai) {
+ if (snd_soc_dai_stream_valid(codec_dai, SNDRV_PCM_STREAM_PLAYBACK) &&
+ snd_soc_dai_stream_valid(cpu_dai, SNDRV_PCM_STREAM_PLAYBACK))
+ playback = 1;
+ if (snd_soc_dai_stream_valid(codec_dai, SNDRV_PCM_STREAM_CAPTURE) &&
+ snd_soc_dai_stream_valid(cpu_dai, SNDRV_PCM_STREAM_CAPTURE))
+ capture = 1;
+ }
/*
* Compress devices are unidirectional so only one of the directions
--
2.34.1
From: Eric Biggers <[email protected]>
commit 9b30430ea356f237945e52f8a3a42158877bd5a9 upstream.
The pkcs1pad template can be instantiated with an arbitrary akcipher
algorithm, which doesn't make sense; it is specifically an RSA padding
scheme. Make it check that the underlying algorithm really is RSA.
Fixes: 3d5b1ecdea6f ("crypto: rsa - RSA padding algorithm")
Cc: <[email protected]> # v4.5+
Signed-off-by: Eric Biggers <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
crypto/rsa-pkcs1pad.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/crypto/rsa-pkcs1pad.c
+++ b/crypto/rsa-pkcs1pad.c
@@ -621,6 +621,11 @@ static int pkcs1pad_create(struct crypto
rsa_alg = crypto_spawn_akcipher_alg(&ctx->spawn);
+ if (strcmp(rsa_alg->base.cra_name, "rsa") != 0) {
+ err = -EINVAL;
+ goto err_free_inst;
+ }
+
err = -ENAMETOOLONG;
hash_name = crypto_attr_alg_name(tb[2]);
if (IS_ERR(hash_name)) {
From: Eric Biggers <[email protected]>
commit e316f7179be22912281ce6331d96d7c121fb2b17 upstream.
Commit c7381b012872 ("crypto: akcipher - new verify API for public key
algorithms") changed akcipher_alg::verify to take in both the signature
and the actual hash and do the signature verification, rather than just
return the hash expected by the signature as was the case before. To do
this, it implemented a hack where the signature and hash are
concatenated with each other in one scatterlist.
Obviously, for this to work correctly, akcipher_alg::verify needs to
correctly extract the two items from the scatterlist it is given.
Unfortunately, it doesn't correctly extract the hash in the case where
the signature is longer than the RSA key size, as it assumes that the
signature's length is equal to the RSA key size. This causes a prefix
of the hash, or even the entire hash, to be taken from the *signature*.
(Note, the case of a signature longer than the RSA key size should not
be allowed in the first place; a separate patch will fix that.)
It is unclear whether the resulting scheme has any useful security
properties.
Fix this by correctly extracting the hash from the scatterlist.
Fixes: c7381b012872 ("crypto: akcipher - new verify API for public key algorithms")
Cc: <[email protected]> # v5.2+
Reviewed-by: Vitaly Chikunov <[email protected]>
Signed-off-by: Eric Biggers <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
crypto/rsa-pkcs1pad.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/crypto/rsa-pkcs1pad.c
+++ b/crypto/rsa-pkcs1pad.c
@@ -495,7 +495,7 @@ static int pkcs1pad_verify_complete(stru
sg_nents_for_len(req->src,
req->src_len + req->dst_len),
req_ctx->out_buf + ctx->key_size,
- req->dst_len, ctx->key_size);
+ req->dst_len, req->src_len);
/* Do the actual verification step. */
if (memcmp(req_ctx->out_buf + ctx->key_size, out_buf + pos,
req->dst_len) != 0)
From: Jiasheng Jiang <[email protected]>
[ Upstream commit c8c80c996182239ff9b05eda4db50184cf3b2e99 ]
As the possible failure of the kzalloc(), the 'new_ts' could be NULL
pointer.
Therefore, it should be better to check it in order to avoid the
dereference of the NULL pointer.
Also, the caller esparser_queue() needs to deal with the return value of
the amvdec_add_ts().
Fixes: 876f123b8956 ("media: meson: vdec: bring up to compliance")
Signed-off-by: Jiasheng Jiang <[email protected]>
Suggested-by: Neil Armstrong <[email protected]>
Reviewed-by: Neil Armstrong <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/staging/media/meson/vdec/esparser.c | 7 ++++++-
drivers/staging/media/meson/vdec/vdec_helpers.c | 8 ++++++--
drivers/staging/media/meson/vdec/vdec_helpers.h | 4 ++--
3 files changed, 14 insertions(+), 5 deletions(-)
diff --git a/drivers/staging/media/meson/vdec/esparser.c b/drivers/staging/media/meson/vdec/esparser.c
index db7022707ff8..86ccc8937afc 100644
--- a/drivers/staging/media/meson/vdec/esparser.c
+++ b/drivers/staging/media/meson/vdec/esparser.c
@@ -328,7 +328,12 @@ esparser_queue(struct amvdec_session *sess, struct vb2_v4l2_buffer *vbuf)
offset = esparser_get_offset(sess);
- amvdec_add_ts(sess, vb->timestamp, vbuf->timecode, offset, vbuf->flags);
+ ret = amvdec_add_ts(sess, vb->timestamp, vbuf->timecode, offset, vbuf->flags);
+ if (ret) {
+ v4l2_m2m_buf_done(vbuf, VB2_BUF_STATE_ERROR);
+ return ret;
+ }
+
dev_dbg(core->dev, "esparser: ts = %llu pld_size = %u offset = %08X flags = %08X\n",
vb->timestamp, payload_size, offset, vbuf->flags);
diff --git a/drivers/staging/media/meson/vdec/vdec_helpers.c b/drivers/staging/media/meson/vdec/vdec_helpers.c
index 7f07a9175815..db4a854e59a3 100644
--- a/drivers/staging/media/meson/vdec/vdec_helpers.c
+++ b/drivers/staging/media/meson/vdec/vdec_helpers.c
@@ -227,13 +227,16 @@ int amvdec_set_canvases(struct amvdec_session *sess,
}
EXPORT_SYMBOL_GPL(amvdec_set_canvases);
-void amvdec_add_ts(struct amvdec_session *sess, u64 ts,
- struct v4l2_timecode tc, u32 offset, u32 vbuf_flags)
+int amvdec_add_ts(struct amvdec_session *sess, u64 ts,
+ struct v4l2_timecode tc, u32 offset, u32 vbuf_flags)
{
struct amvdec_timestamp *new_ts;
unsigned long flags;
new_ts = kzalloc(sizeof(*new_ts), GFP_KERNEL);
+ if (!new_ts)
+ return -ENOMEM;
+
new_ts->ts = ts;
new_ts->tc = tc;
new_ts->offset = offset;
@@ -242,6 +245,7 @@ void amvdec_add_ts(struct amvdec_session *sess, u64 ts,
spin_lock_irqsave(&sess->ts_spinlock, flags);
list_add_tail(&new_ts->list, &sess->timestamps);
spin_unlock_irqrestore(&sess->ts_spinlock, flags);
+ return 0;
}
EXPORT_SYMBOL_GPL(amvdec_add_ts);
diff --git a/drivers/staging/media/meson/vdec/vdec_helpers.h b/drivers/staging/media/meson/vdec/vdec_helpers.h
index cfaed52ab526..798e5a8a9b3f 100644
--- a/drivers/staging/media/meson/vdec/vdec_helpers.h
+++ b/drivers/staging/media/meson/vdec/vdec_helpers.h
@@ -55,8 +55,8 @@ void amvdec_dst_buf_done_offset(struct amvdec_session *sess,
* @offset: offset in the VIFIFO where the associated packet was written
* @flags the vb2_v4l2_buffer flags
*/
-void amvdec_add_ts(struct amvdec_session *sess, u64 ts,
- struct v4l2_timecode tc, u32 offset, u32 flags);
+int amvdec_add_ts(struct amvdec_session *sess, u64 ts,
+ struct v4l2_timecode tc, u32 offset, u32 flags);
void amvdec_remove_ts(struct amvdec_session *sess, u64 ts);
/**
--
2.34.1
From: Florian Fainelli <[email protected]>
[ Upstream commit bf8bfc4336f7a34e48b3bbd19b1542bf085bdc3d ]
A Broadcom AC201 PHY (same entry as 5241) would be flagged by the
Broadcom UniMAC MDIO controller as not completing the turn around
properly since the PHY expects 65 MDC clock cycles to complete a write
cycle, and the MDIO controller was only sending 64 MDC clock cycles as
determined by looking at a scope shot.
This would make the subsequent read fail with the UniMAC MDIO controller
command field having MDIO_READ_FAIL set and we would abort the
brcm_fet_config_init() function and thus not probe the PHY at all.
After issuing a software reset, wait for at least 1ms which is well
above the 1us reset delay advertised by the datasheet and issue a dummy
read to let the PHY turn around the line properly. This read
specifically ignores -EIO which would be returned by MDIO controllers
checking for the line being turned around.
If we have a genuine reaad failure, the next read of the interrupt
status register would pick it up anyway.
Fixes: d7a2ed9248a3 ("broadcom: Add AC131 phy support")
Signed-off-by: Florian Fainelli <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/phy/broadcom.c | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c
index 644861366d54..0cde17bd743f 100644
--- a/drivers/net/phy/broadcom.c
+++ b/drivers/net/phy/broadcom.c
@@ -11,6 +11,7 @@
*/
#include "bcm-phy-lib.h"
+#include <linux/delay.h>
#include <linux/module.h>
#include <linux/phy.h>
#include <linux/brcmphy.h>
@@ -622,6 +623,26 @@ static int brcm_fet_config_init(struct phy_device *phydev)
if (err < 0)
return err;
+ /* The datasheet indicates the PHY needs up to 1us to complete a reset,
+ * build some slack here.
+ */
+ usleep_range(1000, 2000);
+
+ /* The PHY requires 65 MDC clock cycles to complete a write operation
+ * and turnaround the line properly.
+ *
+ * We ignore -EIO here as the MDIO controller (e.g.: mdio-bcm-unimac)
+ * may flag the lack of turn-around as a read failure. This is
+ * particularly true with this combination since the MDIO controller
+ * only used 64 MDC cycles. This is not a critical failure in this
+ * specific case and it has no functional impact otherwise, so we let
+ * that one go through. If there is a genuine bus error, the next read
+ * of MII_BRCM_FET_INTREG will error out.
+ */
+ err = phy_read(phydev, MII_BMCR);
+ if (err < 0 && err != -EIO)
+ return err;
+
reg = phy_read(phydev, MII_BRCM_FET_INTREG);
if (reg < 0)
return reg;
--
2.34.1
From: Jakub Kicinski <[email protected]>
[ Upstream commit ed0c99dc0f499ff8b6e75b5ae6092ab42be1ad39 ]
tp->rx_opt.mss_clamp is not populated, yet, during TFO send so we
rise it to the local MSS. tp->mss_cache is not updated, however:
tcp_v6_connect():
tp->rx_opt.mss_clamp = IPV6_MIN_MTU - headers;
tcp_connect():
tcp_connect_init():
tp->mss_cache = min(mtu, tp->rx_opt.mss_clamp)
tcp_send_syn_data():
tp->rx_opt.mss_clamp = tp->advmss
After recent fixes to ICMPv6 PTB handling we started dropping
PMTU updates higher than tp->mss_cache. Because of the stale
tp->mss_cache value PMTU updates during TFO are always dropped.
Thanks to Wei for helping zero in on the problem and the fix!
Fixes: c7bb4b89033b ("ipv6: tcp: drop silly ICMPv6 packet too big messages")
Reported-by: Andre Nash <[email protected]>
Reported-by: Neil Spring <[email protected]>
Reviewed-by: Wei Wang <[email protected]>
Acked-by: Yuchung Cheng <[email protected]>
Acked-by: Martin KaFai Lau <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/ipv4/tcp_output.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c
index 19ef4577b70d..ce9987e6ff25 100644
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -3733,6 +3733,7 @@ static void tcp_connect_queue_skb(struct sock *sk, struct sk_buff *skb)
*/
static int tcp_send_syn_data(struct sock *sk, struct sk_buff *syn)
{
+ struct inet_connection_sock *icsk = inet_csk(sk);
struct tcp_sock *tp = tcp_sk(sk);
struct tcp_fastopen_request *fo = tp->fastopen_req;
int space, err = 0;
@@ -3747,8 +3748,10 @@ static int tcp_send_syn_data(struct sock *sk, struct sk_buff *syn)
* private TCP options. The cost is reduced data space in SYN :(
*/
tp->rx_opt.mss_clamp = tcp_mss_clamp(tp, tp->rx_opt.mss_clamp);
+ /* Sync mss_cache after updating the mss_clamp */
+ tcp_sync_mss(sk, icsk->icsk_pmtu_cookie);
- space = __tcp_mtu_to_mss(sk, inet_csk(sk)->icsk_pmtu_cookie) -
+ space = __tcp_mtu_to_mss(sk, icsk->icsk_pmtu_cookie) -
MAX_TCP_OPTION_SPACE;
space = min_t(size_t, space, fo->size);
--
2.34.1
From: Randy Dunlap <[email protected]>
[ Upstream commit 39844b7e3084baecef52d1498b5fa81afa2cefa9 ]
__setup() handlers should return 1 if the parameter is handled.
Returning 0 causes the entire string to be added to init's
environment strings (limited to 32 strings), unnecessarily polluting it.
Using the documented strings "TOMOYO_loader=string1" and
"TOMOYO_trigger=string2" causes an Unknown parameter message:
Unknown kernel command line parameters
"BOOT_IMAGE=/boot/bzImage-517rc5 TOMOYO_loader=string1 \
TOMOYO_trigger=string2", will be passed to user space.
and these strings are added to init's environment string space:
Run /sbin/init as init process
with arguments:
/sbin/init
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/boot/bzImage-517rc5
TOMOYO_loader=string1
TOMOYO_trigger=string2
With this change, these __setup handlers act as expected,
and init's environment is not polluted with these strings.
Fixes: 0e4ae0e0dec63 ("TOMOYO: Make several options configurable.")
Signed-off-by: Randy Dunlap <[email protected]>
Reported-by: Igor Zhbanov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: James Morris <[email protected]>
Cc: Kentaro Takeda <[email protected]>
Cc: [email protected]
Cc: "Serge E. Hallyn" <[email protected]>
Signed-off-by: Tetsuo Handa <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
security/tomoyo/load_policy.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/security/tomoyo/load_policy.c b/security/tomoyo/load_policy.c
index 3445ae6fd479..363b65be87ab 100644
--- a/security/tomoyo/load_policy.c
+++ b/security/tomoyo/load_policy.c
@@ -24,7 +24,7 @@ static const char *tomoyo_loader;
static int __init tomoyo_loader_setup(char *str)
{
tomoyo_loader = str;
- return 0;
+ return 1;
}
__setup("TOMOYO_loader=", tomoyo_loader_setup);
@@ -64,7 +64,7 @@ static const char *tomoyo_trigger;
static int __init tomoyo_trigger_setup(char *str)
{
tomoyo_trigger = str;
- return 0;
+ return 1;
}
__setup("TOMOYO_trigger=", tomoyo_trigger_setup);
--
2.34.1
From: Maciej W. Rozycki <[email protected]>
commit 244eae91a94c6dab82b3232967d10eeb9dfa21c6 upstream.
Recent tightening of the opcode table in binutils so as to consistently
disallow the assembly or disassembly of CP0 instructions not supported
by the processor architecture chosen has caused a regression like below:
arch/mips/dec/prom/locore.S: Assembler messages:
arch/mips/dec/prom/locore.S:29: Error: opcode not supported on this processor: r4600 (mips3) `rfe'
in a piece of code used to probe for memory with PMAX DECstation models,
which have non-REX firmware. Those computers always have an R2000 CPU
and consequently the exception handler used in memory probing uses the
RFE instruction, which those processors use.
While adding 64-bit support this code was correctly excluded for 64-bit
configurations, however it should have also been excluded for irrelevant
32-bit configurations. Do this now then, and only enable PMAX memory
probing for R3k systems.
Reported-by: Jan-Benedict Glaw <[email protected]>
Reported-by: Sudip Mukherjee <[email protected]>
Signed-off-by: Maciej W. Rozycki <[email protected]>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: [email protected] # v2.6.12+
Signed-off-by: Thomas Bogendoerfer <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/mips/dec/prom/Makefile | 2 +-
arch/mips/include/asm/dec/prom.h | 15 +++++----------
2 files changed, 6 insertions(+), 11 deletions(-)
--- a/arch/mips/dec/prom/Makefile
+++ b/arch/mips/dec/prom/Makefile
@@ -6,4 +6,4 @@
lib-y += init.o memory.o cmdline.o identify.o console.o
-lib-$(CONFIG_32BIT) += locore.o
+lib-$(CONFIG_CPU_R3000) += locore.o
--- a/arch/mips/include/asm/dec/prom.h
+++ b/arch/mips/include/asm/dec/prom.h
@@ -43,16 +43,11 @@
*/
#define REX_PROM_MAGIC 0x30464354
-#ifdef CONFIG_64BIT
-
-#define prom_is_rex(magic) 1 /* KN04 and KN05 are REX PROMs. */
-
-#else /* !CONFIG_64BIT */
-
-#define prom_is_rex(magic) ((magic) == REX_PROM_MAGIC)
-
-#endif /* !CONFIG_64BIT */
-
+/* KN04 and KN05 are REX PROMs, so only do the check for R3k systems. */
+static inline bool prom_is_rex(u32 magic)
+{
+ return !IS_ENABLED(CONFIG_CPU_R3000) || magic == REX_PROM_MAGIC;
+}
/*
* 3MIN/MAXINE PROM entry points for DS5000/1xx's, DS5000/xx's and
From: Maxime Ripard <[email protected]>
[ Upstream commit 5f7e2af00807f2117650e711a58b7f0e986ce1df ]
When registering a clock that doesn't have a recalc_rate implementation,
and doesn't have its parent registered yet, we initialize the clk_core
rate and 'req_rate' fields to 0.
The rate field is later updated when the parent is registered in
clk_core_reparent_orphans_nolock() using __clk_recalc_rates(), but the
'req_rate' field is never updated.
This leads to an issue in clk_set_rate_range() and clk_put(), since
those functions will call clk_set_rate() with the content of 'req_rate'
to provide drivers with the opportunity to change the rate based on the
new boundaries. In this case, we would call clk_set_rate() with a rate
of 0, effectively enforcing the minimum allowed for this clock whenever
we would call one of those two functions, even though the actual rate
might be within range.
Let's fix this by setting 'req_rate' in
clk_core_reparent_orphans_nolock() with the rate field content just
updated by the call to __clk_recalc_rates().
Fixes: 1c8e600440c7 ("clk: Add rate constraints to clocks")
Reported-by: Dmitry Osipenko <[email protected]>
Tested-by: Dmitry Osipenko <[email protected]> # T30 Nexus7
Signed-off-by: Maxime Ripard <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
[[email protected]: Reword comment]
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/clk.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index b8a0e3d23698..92fc084203b7 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -3384,6 +3384,19 @@ static void clk_core_reparent_orphans_nolock(void)
__clk_set_parent_after(orphan, parent, NULL);
__clk_recalc_accuracies(orphan);
__clk_recalc_rates(orphan, 0);
+
+ /*
+ * __clk_init_parent() will set the initial req_rate to
+ * 0 if the clock doesn't have clk_ops::recalc_rate and
+ * is an orphan when it's registered.
+ *
+ * 'req_rate' is used by clk_set_rate_range() and
+ * clk_put() to trigger a clk_set_rate() call whenever
+ * the boundaries are modified. Let's make sure
+ * 'req_rate' is set to something non-zero so that
+ * clk_set_rate_range() doesn't drop the frequency.
+ */
+ orphan->req_rate = orphan->rate;
}
}
}
--
2.34.1
From: Yang Yingliang <[email protected]>
[ Upstream commit 4ffbcd4ab0b6f77d29acde69dc25bd95318fae5e ]
Use devm_platform_get_and_ioremap_resource() to simplify
code.
Signed-off-by: Yang Yingliang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/rockchip/rockchip_i2s.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/sound/soc/rockchip/rockchip_i2s.c b/sound/soc/rockchip/rockchip_i2s.c
index fa84ec695b52..18f13bf1021c 100644
--- a/sound/soc/rockchip/rockchip_i2s.c
+++ b/sound/soc/rockchip/rockchip_i2s.c
@@ -627,8 +627,7 @@ static int rockchip_i2s_probe(struct platform_device *pdev)
return PTR_ERR(i2s->mclk);
}
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- regs = devm_ioremap_resource(&pdev->dev, res);
+ regs = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
if (IS_ERR(regs))
return PTR_ERR(regs);
--
2.34.1
From: Corentin Labbe <[email protected]>
[ Upstream commit e3b86f4e558cea9eed71d894df2f19b10d60a207 ]
On the case tmp_dcim=1, the index of buffer is miscalculated.
This generate a NULL pointer dereference later.
So let's fix the calcul and add a check to prevent this to reappear.
Signed-off-by: Corentin Labbe <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/staging/media/zoran/zoran_device.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/staging/media/zoran/zoran_device.c b/drivers/staging/media/zoran/zoran_device.c
index e569a1341d01..913f5a3c5bfc 100644
--- a/drivers/staging/media/zoran/zoran_device.c
+++ b/drivers/staging/media/zoran/zoran_device.c
@@ -879,7 +879,7 @@ static void zoran_reap_stat_com(struct zoran *zr)
if (zr->jpg_settings.tmp_dcm == 1)
i = (zr->jpg_dma_tail - zr->jpg_err_shift) & BUZ_MASK_STAT_COM;
else
- i = ((zr->jpg_dma_tail - zr->jpg_err_shift) & 1) * 2 + 1;
+ i = ((zr->jpg_dma_tail - zr->jpg_err_shift) & 1) * 2;
stat_com = le32_to_cpu(zr->stat_com[i]);
if ((stat_com & 1) == 0) {
@@ -891,6 +891,11 @@ static void zoran_reap_stat_com(struct zoran *zr)
size = (stat_com & GENMASK(22, 1)) >> 1;
buf = zr->inuse[i];
+ if (!buf) {
+ spin_unlock_irqrestore(&zr->queued_bufs_lock, flags);
+ pci_err(zr->pci_dev, "No buffer at slot %d\n", i);
+ return;
+ }
buf->vbuf.vb2_buf.timestamp = ktime_get_ns();
if (zr->codec_mode == BUZ_MODE_MOTION_COMPRESS) {
--
2.34.1
From: Daniel González Cabanelas <[email protected]>
[ Upstream commit 56cb61f70e547e1b0cdfe6ff5a1f1ce6242e6d96 ]
Some cx88 video cards may have transport stream status interrupts set
to 1 from cold start, causing errors like this:
cx88xx: cx88_print_irqbits: core:irq mpeg [0x100000] ts_err?*
cx8802: cx8802_mpeg_irq: mpeg:general errors: 0x00100000
According to CX2388x datasheet, the interrupt status register should be
cleared before enabling IRQs to stream video.
Fix it by clearing the Transport Stream Interrupt Status register.
Signed-off-by: Daniel González Cabanelas <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/pci/cx88/cx88-mpeg.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/media/pci/cx88/cx88-mpeg.c b/drivers/media/pci/cx88/cx88-mpeg.c
index a57c991b165b..10d2971ef062 100644
--- a/drivers/media/pci/cx88/cx88-mpeg.c
+++ b/drivers/media/pci/cx88/cx88-mpeg.c
@@ -162,6 +162,9 @@ int cx8802_start_dma(struct cx8802_dev *dev,
cx_write(MO_TS_GPCNTRL, GP_COUNT_CONTROL_RESET);
q->count = 0;
+ /* clear interrupt status register */
+ cx_write(MO_TS_INTSTAT, 0x1f1111);
+
/* enable irqs */
dprintk(1, "setting the interrupt mask\n");
cx_set(MO_PCI_INTMSK, core->pci_irqmask | PCI_INT_TSINT);
--
2.34.1
From: Geert Uytterhoeven <[email protected]>
[ Upstream commit de9b861018d46af27a5edff8b6baef35c0c0ad4f ]
The checker failed to validate all enum IDs in the description of a
register with fixed-width register fields, due to a miscalculation of
the number of described states: each register field of n bits can have
"1 << n" possible states, not "1".
Increase SH_PFC_MAX_ENUMS accordingly, now more enum IDs are checked
(SH-Mobile AG5 has more than 4000 enum IDs defined).
Fixes: 12d057bad683b1c6 ("pinctrl: sh-pfc: checker: Add check for enum ID conflicts")
Signed-off-by: Geert Uytterhoeven <[email protected]>
Link: https://lore.kernel.org/r/6d8a6a05564f38f9d20464c1c17f96e52740cf6a.1645460429.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pinctrl/renesas/core.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/pinctrl/renesas/core.c b/drivers/pinctrl/renesas/core.c
index 9d168b90cd28..258972672eda 100644
--- a/drivers/pinctrl/renesas/core.c
+++ b/drivers/pinctrl/renesas/core.c
@@ -739,7 +739,7 @@ static int sh_pfc_suspend_init(struct sh_pfc *pfc) { return 0; }
#ifdef DEBUG
#define SH_PFC_MAX_REGS 300
-#define SH_PFC_MAX_ENUMS 3000
+#define SH_PFC_MAX_ENUMS 5000
static unsigned int sh_pfc_errors __initdata = 0;
static unsigned int sh_pfc_warnings __initdata = 0;
@@ -851,7 +851,8 @@ static void __init sh_pfc_check_cfg_reg(const char *drvname,
sh_pfc_check_reg(drvname, cfg_reg->reg);
if (cfg_reg->field_width) {
- n = cfg_reg->reg_width / cfg_reg->field_width;
+ fw = cfg_reg->field_width;
+ n = (cfg_reg->reg_width / fw) << fw;
/* Skip field checks (done at build time) */
goto check_enum_ids;
}
--
2.34.1
From: Corentin Labbe <[email protected]>
[ Upstream commit 241f5b67fb48def58643f279dfb8468bdd54b443 ]
vb2_dma_contig_set_max_seg_size need to have a size in parameter and not
a DMA_BIT_MASK().
While fixing this issue, also fix error handling of all DMA size
setting.
Reported-by: kernel test robot <[email protected]>
Fixes: d4ae3689226e5 ("media: zoran: device support only 32bit DMA address")
Signed-off-by: Corentin Labbe <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/staging/media/zoran/zoran_card.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/staging/media/zoran/zoran_card.c b/drivers/staging/media/zoran/zoran_card.c
index dfc60e2e9dd7..721f1decb0a7 100644
--- a/drivers/staging/media/zoran/zoran_card.c
+++ b/drivers/staging/media/zoran/zoran_card.c
@@ -1068,8 +1068,10 @@ static int zoran_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
if (err)
- return -ENODEV;
- vb2_dma_contig_set_max_seg_size(&pdev->dev, DMA_BIT_MASK(32));
+ return err;
+ err = vb2_dma_contig_set_max_seg_size(&pdev->dev, U32_MAX);
+ if (err)
+ return err;
nr = zoran_num++;
if (nr >= BUZ_MAX) {
--
2.34.1
From: Randy Dunlap <[email protected]>
commit 1dc2f2b81a6a9895da59f3915760f6c0c3074492 upstream.
The hyperv utilities use PTP clock interfaces and should depend a
a kconfig symbol such that they will be built as a loadable module or
builtin so that linker errors do not happen.
Prevents these build errors:
ld: drivers/hv/hv_util.o: in function `hv_timesync_deinit':
hv_util.c:(.text+0x37d): undefined reference to `ptp_clock_unregister'
ld: drivers/hv/hv_util.o: in function `hv_timesync_init':
hv_util.c:(.text+0x738): undefined reference to `ptp_clock_register'
Fixes: 3716a49a81ba ("hv_utils: implement Hyper-V PTP source")
Signed-off-by: Randy Dunlap <[email protected]>
Reported-by: kernel test robot <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: "K. Y. Srinivasan" <[email protected]>
Cc: Haiyang Zhang <[email protected]>
Cc: Stephen Hemminger <[email protected]>
Cc: Wei Liu <[email protected]>
Cc: Dexuan Cui <[email protected]>
Cc: [email protected]
Cc: Greg Kroah-Hartman <[email protected]>
Reviewed-by: Michael Kelley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Wei Liu <[email protected]>
Cc: Petr Štetiar <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/hv/Kconfig | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/hv/Kconfig
+++ b/drivers/hv/Kconfig
@@ -17,6 +17,7 @@ config HYPERV_TIMER
config HYPERV_UTILS
tristate "Microsoft Hyper-V Utilities driver"
depends on HYPERV && CONNECTOR && NLS
+ depends on PTP_1588_CLOCK_OPTIONAL
help
Select this option to enable the Hyper-V Utilities.
From: Miaoqian Lin <[email protected]>
[ Upstream commit 89388f8730699c259f8090ec435fb43569efe4ac ]
The device_node pointer is returned by of_parse_phandle() with refcount
incremented. We should use of_node_put() on it when done.
Fixes: 1e747e59cc4d ("pinctrl: rockchip: base regmap supplied by a syscon")
Fixes: 14dee8677e19 ("pinctrl: rockchip: let pmu registers be supplied by a syscon")
Signed-off-by: Miaoqian Lin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pinctrl/pinctrl-rockchip.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/pinctrl/pinctrl-rockchip.c b/drivers/pinctrl/pinctrl-rockchip.c
index 53a0badc6b03..9df48e0cf4cb 100644
--- a/drivers/pinctrl/pinctrl-rockchip.c
+++ b/drivers/pinctrl/pinctrl-rockchip.c
@@ -3774,6 +3774,7 @@ static int rockchip_pinctrl_probe(struct platform_device *pdev)
node = of_parse_phandle(np, "rockchip,grf", 0);
if (node) {
info->regmap_base = syscon_node_to_regmap(node);
+ of_node_put(node);
if (IS_ERR(info->regmap_base))
return PTR_ERR(info->regmap_base);
} else {
@@ -3810,6 +3811,7 @@ static int rockchip_pinctrl_probe(struct platform_device *pdev)
node = of_parse_phandle(np, "rockchip,pmu", 0);
if (node) {
info->regmap_pmu = syscon_node_to_regmap(node);
+ of_node_put(node);
if (IS_ERR(info->regmap_pmu))
return PTR_ERR(info->regmap_pmu);
}
--
2.34.1
From: Hector Martin <[email protected]>
commit b50255c83b914defd61a57fbc81d452334b63f4c upstream.
The driver was enabling IRQs before the message processing was
initialized. This could cause IRQs to come in too early and crash the
driver. Instead, move the IRQ enable and hostready to a bus preinit
function, at which point everything is properly initialized.
Fixes: 9e37f045d5e7 ("brcmfmac: Adding PCIe bus layer support.")
Reviewed-by: Linus Walleij <[email protected]>
Reviewed-by: Arend van Spriel <[email protected]>
Cc: [email protected]
Signed-off-by: Hector Martin <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c | 16 +++++++++++++---
1 file changed, 13 insertions(+), 3 deletions(-)
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
@@ -1306,6 +1306,18 @@ static void brcmf_pcie_down(struct devic
{
}
+static int brcmf_pcie_preinit(struct device *dev)
+{
+ struct brcmf_bus *bus_if = dev_get_drvdata(dev);
+ struct brcmf_pciedev *buspub = bus_if->bus_priv.pcie;
+
+ brcmf_dbg(PCIE, "Enter\n");
+
+ brcmf_pcie_intr_enable(buspub->devinfo);
+ brcmf_pcie_hostready(buspub->devinfo);
+
+ return 0;
+}
static int brcmf_pcie_tx(struct device *dev, struct sk_buff *skb)
{
@@ -1414,6 +1426,7 @@ static int brcmf_pcie_reset(struct devic
}
static const struct brcmf_bus_ops brcmf_pcie_bus_ops = {
+ .preinit = brcmf_pcie_preinit,
.txdata = brcmf_pcie_tx,
.stop = brcmf_pcie_down,
.txctl = brcmf_pcie_tx_ctlpkt,
@@ -1786,9 +1799,6 @@ static void brcmf_pcie_setup(struct devi
init_waitqueue_head(&devinfo->mbdata_resp_wait);
- brcmf_pcie_intr_enable(devinfo);
- brcmf_pcie_hostready(devinfo);
-
ret = brcmf_attach(&devinfo->pdev->dev);
if (ret)
goto fail;
From: Mastan Katragadda <[email protected]>
commit 3886a86e7e6cc6ce2ce93c440fecd8f42aed0ce7 upstream.
A missing bounds check in vm_access() can lead to an out-of-bounds read
or write in the adjacent memory area, since the len attribute is not
validated before the memcpy later in the function, potentially hitting:
[ 183.637831] BUG: unable to handle page fault for address: ffffc90000c86000
[ 183.637934] #PF: supervisor read access in kernel mode
[ 183.637997] #PF: error_code(0x0000) - not-present page
[ 183.638059] PGD 100000067 P4D 100000067 PUD 100258067 PMD 106341067 PTE 0
[ 183.638144] Oops: 0000 [#2] PREEMPT SMP NOPTI
[ 183.638201] CPU: 3 PID: 1790 Comm: poc Tainted: G D 5.17.0-rc6-ci-drm-11296+ #1
[ 183.638298] Hardware name: Intel Corporation CoffeeLake Client Platform/CoffeeLake H DDR4 RVP, BIOS CNLSFWR1.R00.X208.B00.1905301319 05/30/2019
[ 183.638430] RIP: 0010:memcpy_erms+0x6/0x10
[ 183.640213] RSP: 0018:ffffc90001763d48 EFLAGS: 00010246
[ 183.641117] RAX: ffff888109c14000 RBX: ffff888111bece40 RCX: 0000000000000ffc
[ 183.642029] RDX: 0000000000001000 RSI: ffffc90000c86000 RDI: ffff888109c14004
[ 183.642946] RBP: 0000000000000ffc R08: 800000000000016b R09: 0000000000000000
[ 183.643848] R10: ffffc90000c85000 R11: 0000000000000048 R12: 0000000000001000
[ 183.644742] R13: ffff888111bed190 R14: ffff888109c14000 R15: 0000000000001000
[ 183.645653] FS: 00007fe5ef807540(0000) GS:ffff88845b380000(0000) knlGS:0000000000000000
[ 183.646570] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 183.647481] CR2: ffffc90000c86000 CR3: 000000010ff02006 CR4: 00000000003706e0
[ 183.648384] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 183.649271] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 183.650142] Call Trace:
[ 183.650988] <TASK>
[ 183.651793] vm_access+0x1f0/0x2a0 [i915]
[ 183.652726] __access_remote_vm+0x224/0x380
[ 183.653561] mem_rw.isra.0+0xf9/0x190
[ 183.654402] vfs_read+0x9d/0x1b0
[ 183.655238] ksys_read+0x63/0xe0
[ 183.656065] do_syscall_64+0x38/0xc0
[ 183.656882] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 183.657663] RIP: 0033:0x7fe5ef725142
[ 183.659351] RSP: 002b:00007ffe1e81c7e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
[ 183.660227] RAX: ffffffffffffffda RBX: 0000557055dfb780 RCX: 00007fe5ef725142
[ 183.661104] RDX: 0000000000001000 RSI: 00007ffe1e81d880 RDI: 0000000000000005
[ 183.661972] RBP: 00007ffe1e81e890 R08: 0000000000000030 R09: 0000000000000046
[ 183.662832] R10: 0000557055dfc2e0 R11: 0000000000000246 R12: 0000557055dfb1c0
[ 183.663691] R13: 00007ffe1e81e980 R14: 0000000000000000 R15: 0000000000000000
Changes since v1:
- Updated if condition with range_overflows_t [Chris Wilson]
Fixes: 9f909e215fea ("drm/i915: Implement vm_ops->access for gdb access into mmaps")
Signed-off-by: Mastan Katragadda <[email protected]>
Suggested-by: Adam Zabrocki <[email protected]>
Reported-by: Jackson Cody <[email protected]>
Cc: Chris Wilson <[email protected]>
Cc: Jon Bloomfield <[email protected]>
Cc: Sudeep Dutt <[email protected]>
Cc: <[email protected]> # v5.8+
Reviewed-by: Matthew Auld <[email protected]>
[mauld: tidy up the commit message and add Cc: stable]
Signed-off-by: Matthew Auld <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 661412e301e2ca86799aa4f400d1cf0bd38c57c6)
Signed-off-by: Joonas Lahtinen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/i915/gem/i915_gem_mman.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/gpu/drm/i915/gem/i915_gem_mman.c
+++ b/drivers/gpu/drm/i915/gem/i915_gem_mman.c
@@ -423,7 +423,7 @@ vm_access(struct vm_area_struct *area, u
return -EACCES;
addr -= area->vm_start;
- if (addr >= obj->base.size)
+ if (range_overflows_t(u64, addr, len, obj->base.size))
return -EINVAL;
/* As this is primarily for debugging, let's focus on simplicity */
From: Andre Przywara <[email protected]>
[ Upstream commit f5eb04d7a0e419d61f784de3ced708259ddb71d7 ]
Commit 06b93644f4d1 ("media: Kconfig: add an option to filter in/out
platform drivers") introduced CONFIG_MEDIA_PLATFORM_SUPPORT, to allow
more fine grained control over the inclusion of certain Kconfig files.
multi_v5_defconfig was selecting some drivers described in
drivers/media/platform/Kconfig, which now wasn't included anymore.
Explicitly set the new symbol in multi_v5_defconfig to bring those
drivers back.
This enables some new V4L2 and VIDEOBUF2 features, but as modules only.
Fixes: 06b93644f4d1 ("media: Kconfig: add an option to filter in/out platform drivers")
Signed-off-by: Andre Przywara <[email protected]>
Link: https://lore.kernel.org/r/[email protected]'
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/configs/multi_v5_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/configs/multi_v5_defconfig b/arch/arm/configs/multi_v5_defconfig
index e00be9faa23b..4393e689f235 100644
--- a/arch/arm/configs/multi_v5_defconfig
+++ b/arch/arm/configs/multi_v5_defconfig
@@ -187,6 +187,7 @@ CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_MEDIA_SUPPORT=y
CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_MEDIA_PLATFORM_SUPPORT=y
CONFIG_V4L_PLATFORM_DRIVERS=y
CONFIG_VIDEO_ASPEED=m
CONFIG_VIDEO_ATMEL_ISI=m
--
2.34.1
From: Alexey Khoroshilov <[email protected]>
[ Upstream commit cb8fac6d2727f79f211e745b16c9abbf4d8be652 ]
[You don't often get email from [email protected]. Learn why this is important at http://aka.ms/LearnAboutSenderIdentification.]
Overflow check in not needed anymore after we switch to kmalloc_array().
Signed-off-by: Alexey Khoroshilov <[email protected]>
Fixes: a4f743a6bb20 ("NFSv4.1: Convert open-coded array allocation calls to kmalloc_array()")
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/nfs/callback_xdr.c | 4 ----
1 file changed, 4 deletions(-)
diff --git a/fs/nfs/callback_xdr.c b/fs/nfs/callback_xdr.c
index 1725079a0527..ca8a4aa351dc 100644
--- a/fs/nfs/callback_xdr.c
+++ b/fs/nfs/callback_xdr.c
@@ -272,10 +272,6 @@ __be32 decode_devicenotify_args(struct svc_rqst *rqstp,
n = ntohl(*p++);
if (n == 0)
goto out;
- if (n > ULONG_MAX / sizeof(*args->devs)) {
- status = htonl(NFS4ERR_BADXDR);
- goto out;
- }
args->devs = kmalloc_array(n, sizeof(*args->devs), GFP_KERNEL);
if (!args->devs) {
--
2.34.1
From: Maíra Canal <[email protected]>
[ Upstream commit 3679b8518cd213c25d555553ef212e233faf698c ]
Remove the vupdate_int_entry definition and utilization to avoid the
following warning by Clang:
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:410:2:
warning: initializer overrides prior initialization of this subobject
[-Winitializer-overrides]
vupdate_no_lock_int_entry(0),
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:280:39:
note: expanded from macro 'vupdate_no_lock_int_entry'
[DC_IRQ_SOURCE_VUPDATE1 + reg_num] = {\
^~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:404:2:
note: previous initialization is here
vupdate_int_entry(0),
^~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:269:39:
note: expanded from macro 'vupdate_int_entry'
[DC_IRQ_SOURCE_VUPDATE1 + reg_num] = {\
^~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:411:2:
warning: initializer overrides prior initialization of this subobject
[-Winitializer-overrides]
vupdate_no_lock_int_entry(1),
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:280:39:
note: expanded from macro 'vupdate_no_lock_int_entry'
[DC_IRQ_SOURCE_VUPDATE1 + reg_num] = {\
^~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:405:2:
note: previous initialization is here
vupdate_int_entry(1),
^~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:269:39:
note: expanded from macro 'vupdate_int_entry'
[DC_IRQ_SOURCE_VUPDATE1 + reg_num] = {\
^~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:412:2:
warning: initializer overrides prior initialization of this subobject
[-Winitializer-overrides]
vupdate_no_lock_int_entry(2),
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:280:39:
note: expanded from macro 'vupdate_no_lock_int_entry'
[DC_IRQ_SOURCE_VUPDATE1 + reg_num] = {\
^~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:406:2:
note: previous initialization is here
vupdate_int_entry(2),
^~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:269:39:
note: expanded from macro 'vupdate_int_entry'
[DC_IRQ_SOURCE_VUPDATE1 + reg_num] = {\
^~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:413:2:
warning: initializer overrides prior initialization of this subobject
[-Winitializer-overrides]
vupdate_no_lock_int_entry(3),
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:280:39:
note: expanded from macro 'vupdate_no_lock_int_entry'
[DC_IRQ_SOURCE_VUPDATE1 + reg_num] = {\
^~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:407:2:
note: previous initialization is here
vupdate_int_entry(3),
^~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:269:39:
note: expanded from macro 'vupdate_int_entry'
[DC_IRQ_SOURCE_VUPDATE1 + reg_num] = {\
^~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:414:2:
warning: initializer overrides prior initialization of this subobject
[-Winitializer-overrides]
vupdate_no_lock_int_entry(4),
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:280:39:
note: expanded from macro 'vupdate_no_lock_int_entry'
[DC_IRQ_SOURCE_VUPDATE1 + reg_num] = {\
^~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:408:2:
note: previous initialization is here
vupdate_int_entry(4),
^~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:269:39:
note: expanded from macro 'vupdate_int_entry'
[DC_IRQ_SOURCE_VUPDATE1 + reg_num] = {\
^~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:415:2:
warning: initializer overrides prior initialization of this subobject
[-Winitializer-overrides]
vupdate_no_lock_int_entry(5),
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:280:39:
note: expanded from macro 'vupdate_no_lock_int_entry'
[DC_IRQ_SOURCE_VUPDATE1 + reg_num] = {\
^~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:409:2:
note: previous initialization is here
vupdate_int_entry(5),
^~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:269:39:
note: expanded from macro 'vupdate_int_entry'
[DC_IRQ_SOURCE_VUPDATE1 + reg_num] = {\
^~
6 warnings generated.
Fixes: 688f97ed3f5e ("drm/amd/display: Add vupdate_no_lock interrupts for DCN2.1")
Signed-off-by: Maíra Canal <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../amd/display/dc/irq/dcn21/irq_service_dcn21.c | 14 --------------
1 file changed, 14 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/irq/dcn21/irq_service_dcn21.c b/drivers/gpu/drm/amd/display/dc/irq/dcn21/irq_service_dcn21.c
index 0e0f494fbb5e..b037fd57fd36 100644
--- a/drivers/gpu/drm/amd/display/dc/irq/dcn21/irq_service_dcn21.c
+++ b/drivers/gpu/drm/amd/display/dc/irq/dcn21/irq_service_dcn21.c
@@ -227,14 +227,6 @@ static const struct irq_source_info_funcs vupdate_no_lock_irq_info_funcs = {
.funcs = &pflip_irq_info_funcs\
}
-#define vupdate_int_entry(reg_num)\
- [DC_IRQ_SOURCE_VUPDATE1 + reg_num] = {\
- IRQ_REG_ENTRY(OTG, reg_num,\
- OTG_GLOBAL_SYNC_STATUS, VUPDATE_INT_EN,\
- OTG_GLOBAL_SYNC_STATUS, VUPDATE_EVENT_CLEAR),\
- .funcs = &vblank_irq_info_funcs\
- }
-
/* vupdate_no_lock_int_entry maps to DC_IRQ_SOURCE_VUPDATEx, to match semantic
* of DCE's DC_IRQ_SOURCE_VUPDATEx.
*/
@@ -348,12 +340,6 @@ irq_source_info_dcn21[DAL_IRQ_SOURCES_NUMBER] = {
dc_underflow_int_entry(6),
[DC_IRQ_SOURCE_DMCU_SCP] = dummy_irq_entry(),
[DC_IRQ_SOURCE_VBIOS_SW] = dummy_irq_entry(),
- vupdate_int_entry(0),
- vupdate_int_entry(1),
- vupdate_int_entry(2),
- vupdate_int_entry(3),
- vupdate_int_entry(4),
- vupdate_int_entry(5),
vupdate_no_lock_int_entry(0),
vupdate_no_lock_int_entry(1),
vupdate_no_lock_int_entry(2),
--
2.34.1
From: Marc Zyngier <[email protected]>
[ Upstream commit f7e53e2255808ca3abcc8f38d18ad0823425e771 ]
The npcm driver has a bunch of references to the irq_chip parent_device
field, but never sets it.
Fix it by fishing that reference from somewhere else, but it is
obvious that these debug statements were never used. Also remove
an unused field in a local data structure.
Signed-off-by: Marc Zyngier <[email protected]>
Acked-by: Bartosz Golaszewski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pinctrl/nuvoton/pinctrl-npcm7xx.c | 25 +++++++++++------------
1 file changed, 12 insertions(+), 13 deletions(-)
diff --git a/drivers/pinctrl/nuvoton/pinctrl-npcm7xx.c b/drivers/pinctrl/nuvoton/pinctrl-npcm7xx.c
index 6de31b5ee358..c359e25519f8 100644
--- a/drivers/pinctrl/nuvoton/pinctrl-npcm7xx.c
+++ b/drivers/pinctrl/nuvoton/pinctrl-npcm7xx.c
@@ -78,7 +78,6 @@ struct npcm7xx_gpio {
struct gpio_chip gc;
int irqbase;
int irq;
- void *priv;
struct irq_chip irq_chip;
u32 pinctrl_id;
int (*direction_input)(struct gpio_chip *chip, unsigned offset);
@@ -226,7 +225,7 @@ static void npcmgpio_irq_handler(struct irq_desc *desc)
chained_irq_enter(chip, desc);
sts = ioread32(bank->base + NPCM7XX_GP_N_EVST);
en = ioread32(bank->base + NPCM7XX_GP_N_EVEN);
- dev_dbg(chip->parent_device, "==> got irq sts %.8x %.8x\n", sts,
+ dev_dbg(bank->gc.parent, "==> got irq sts %.8x %.8x\n", sts,
en);
sts &= en;
@@ -241,33 +240,33 @@ static int npcmgpio_set_irq_type(struct irq_data *d, unsigned int type)
gpiochip_get_data(irq_data_get_irq_chip_data(d));
unsigned int gpio = BIT(d->hwirq);
- dev_dbg(d->chip->parent_device, "setirqtype: %u.%u = %u\n", gpio,
+ dev_dbg(bank->gc.parent, "setirqtype: %u.%u = %u\n", gpio,
d->irq, type);
switch (type) {
case IRQ_TYPE_EDGE_RISING:
- dev_dbg(d->chip->parent_device, "edge.rising\n");
+ dev_dbg(bank->gc.parent, "edge.rising\n");
npcm_gpio_clr(&bank->gc, bank->base + NPCM7XX_GP_N_EVBE, gpio);
npcm_gpio_clr(&bank->gc, bank->base + NPCM7XX_GP_N_POL, gpio);
break;
case IRQ_TYPE_EDGE_FALLING:
- dev_dbg(d->chip->parent_device, "edge.falling\n");
+ dev_dbg(bank->gc.parent, "edge.falling\n");
npcm_gpio_clr(&bank->gc, bank->base + NPCM7XX_GP_N_EVBE, gpio);
npcm_gpio_set(&bank->gc, bank->base + NPCM7XX_GP_N_POL, gpio);
break;
case IRQ_TYPE_EDGE_BOTH:
- dev_dbg(d->chip->parent_device, "edge.both\n");
+ dev_dbg(bank->gc.parent, "edge.both\n");
npcm_gpio_set(&bank->gc, bank->base + NPCM7XX_GP_N_EVBE, gpio);
break;
case IRQ_TYPE_LEVEL_LOW:
- dev_dbg(d->chip->parent_device, "level.low\n");
+ dev_dbg(bank->gc.parent, "level.low\n");
npcm_gpio_set(&bank->gc, bank->base + NPCM7XX_GP_N_POL, gpio);
break;
case IRQ_TYPE_LEVEL_HIGH:
- dev_dbg(d->chip->parent_device, "level.high\n");
+ dev_dbg(bank->gc.parent, "level.high\n");
npcm_gpio_clr(&bank->gc, bank->base + NPCM7XX_GP_N_POL, gpio);
break;
default:
- dev_dbg(d->chip->parent_device, "invalid irq type\n");
+ dev_dbg(bank->gc.parent, "invalid irq type\n");
return -EINVAL;
}
@@ -289,7 +288,7 @@ static void npcmgpio_irq_ack(struct irq_data *d)
gpiochip_get_data(irq_data_get_irq_chip_data(d));
unsigned int gpio = d->hwirq;
- dev_dbg(d->chip->parent_device, "irq_ack: %u.%u\n", gpio, d->irq);
+ dev_dbg(bank->gc.parent, "irq_ack: %u.%u\n", gpio, d->irq);
iowrite32(BIT(gpio), bank->base + NPCM7XX_GP_N_EVST);
}
@@ -301,7 +300,7 @@ static void npcmgpio_irq_mask(struct irq_data *d)
unsigned int gpio = d->hwirq;
/* Clear events */
- dev_dbg(d->chip->parent_device, "irq_mask: %u.%u\n", gpio, d->irq);
+ dev_dbg(bank->gc.parent, "irq_mask: %u.%u\n", gpio, d->irq);
iowrite32(BIT(gpio), bank->base + NPCM7XX_GP_N_EVENC);
}
@@ -313,7 +312,7 @@ static void npcmgpio_irq_unmask(struct irq_data *d)
unsigned int gpio = d->hwirq;
/* Enable events */
- dev_dbg(d->chip->parent_device, "irq_unmask: %u.%u\n", gpio, d->irq);
+ dev_dbg(bank->gc.parent, "irq_unmask: %u.%u\n", gpio, d->irq);
iowrite32(BIT(gpio), bank->base + NPCM7XX_GP_N_EVENS);
}
@@ -323,7 +322,7 @@ static unsigned int npcmgpio_irq_startup(struct irq_data *d)
unsigned int gpio = d->hwirq;
/* active-high, input, clear interrupt, enable interrupt */
- dev_dbg(d->chip->parent_device, "startup: %u.%u\n", gpio, d->irq);
+ dev_dbg(gc->parent, "startup: %u.%u\n", gpio, d->irq);
npcmgpio_direction_input(gc, gpio);
npcmgpio_irq_ack(d);
npcmgpio_irq_unmask(d);
--
2.34.1
From: Niels Dossche <[email protected]>
[ Upstream commit 9fa6b4cda3b414e990f008f45f9bcecbcb54d4d1 ]
hci_le_conn_failed function's documentation says that the caller must
hold hdev->lock. The only callsite that does not hold that lock is
hci_le_conn_failed. The other 3 callsites hold the hdev->lock very
locally. The solution is to hold the lock during the call to
hci_le_conn_failed.
Fixes: 3c857757ef6e ("Bluetooth: Add directed advertising support through connect()")
Signed-off-by: Niels Dossche <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/bluetooth/hci_conn.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c
index 1c5a0a60292d..ecd2ffcf2ba2 100644
--- a/net/bluetooth/hci_conn.c
+++ b/net/bluetooth/hci_conn.c
@@ -508,7 +508,9 @@ static void le_conn_timeout(struct work_struct *work)
if (conn->role == HCI_ROLE_SLAVE) {
/* Disable LE Advertising */
le_disable_advertising(hdev);
+ hci_dev_lock(hdev);
hci_le_conn_failed(conn, HCI_ERROR_ADVERTISING_TIMEOUT);
+ hci_dev_unlock(hdev);
return;
}
--
2.34.1
From: Pavel Kubelun <[email protected]>
[ Upstream commit 3d7e7980993d2c1ae42d3d314040fc2de6a9c45f ]
It seems like sleep_clk was copied from ipq806x.
Fix ipq40xx sleep_clk to the value QSDK defines.
Link: https://source.codeaurora.org/quic/qsdk/oss/kernel/linux-msm/commit/?id=d92ec59973484acc86dd24b67f10f8911b4b4b7d
Link: https://patchwork.kernel.org/comment/22721613/
Fixes: bec6ba4cdf2a ("qcom: ipq4019: Add basic board/dts support for IPQ4019 SoC")
Suggested-by: Bjorn Andersson <[email protected]> (clock-output-names)
Signed-off-by: Pavel Kubelun <[email protected]>
Signed-off-by: Christian Lamparter <[email protected]> (removed clock rename)
Signed-off-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/qcom-ipq4019.dtsi | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
index 74d8e2c8e4b3..3defd47fd8fa 100644
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -142,7 +142,8 @@
clocks {
sleep_clk: sleep_clk {
compatible = "fixed-clock";
- clock-frequency = <32768>;
+ clock-frequency = <32000>;
+ clock-output-names = "gcc_sleep_clk_src";
#clock-cells = <0>;
};
--
2.34.1
From: Hans de Goede <[email protected]>
[ Upstream commit f7731754fdce33dad19be746f647d6ac47c5d695 ]
The datasheet says that the BQ24190_REG_POC_CHG_CONFIG bits can
have a value of either 10(0x2) or 11(0x3) for OTG (5V boost regulator)
mode.
Sofar bq24190_vbus_is_enabled() was only checking for 10 but some BIOS-es
uses 11 when enabling the regulator at boot.
Make bq24190_vbus_is_enabled() also check for 11 so that it does not
wrongly returns false when the bits are set to 11.
Fixes: 66b6bef2c4e0 ("power: supply: bq24190_charger: Export 5V boost converter as regulator")
Cc: Bastien Nocera <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Signed-off-by: Sebastian Reichel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/power/supply/bq24190_charger.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/power/supply/bq24190_charger.c b/drivers/power/supply/bq24190_charger.c
index 845af0f44c02..8c3c378dce0d 100644
--- a/drivers/power/supply/bq24190_charger.c
+++ b/drivers/power/supply/bq24190_charger.c
@@ -41,6 +41,7 @@
#define BQ24190_REG_POC_CHG_CONFIG_DISABLE 0x0
#define BQ24190_REG_POC_CHG_CONFIG_CHARGE 0x1
#define BQ24190_REG_POC_CHG_CONFIG_OTG 0x2
+#define BQ24190_REG_POC_CHG_CONFIG_OTG_ALT 0x3
#define BQ24190_REG_POC_SYS_MIN_MASK (BIT(3) | BIT(2) | BIT(1))
#define BQ24190_REG_POC_SYS_MIN_SHIFT 1
#define BQ24190_REG_POC_SYS_MIN_MIN 3000
@@ -552,7 +553,11 @@ static int bq24190_vbus_is_enabled(struct regulator_dev *dev)
pm_runtime_mark_last_busy(bdi->dev);
pm_runtime_put_autosuspend(bdi->dev);
- return ret ? ret : val == BQ24190_REG_POC_CHG_CONFIG_OTG;
+ if (ret)
+ return ret;
+
+ return (val == BQ24190_REG_POC_CHG_CONFIG_OTG ||
+ val == BQ24190_REG_POC_CHG_CONFIG_OTG_ALT);
}
static const struct regulator_ops bq24190_vbus_ops = {
--
2.34.1
From: Krzysztof Kozlowski <[email protected]>
commit 453a24ded415f7fce0499c6b0a2c7b28f84911f2 upstream.
Add required VDD supplies to HDMI block on SMDK5420. Without them, the
HDMI driver won't probe. Because of lack of schematics, use same
supplies as on Arndale Octa and Odroid XU3 boards (voltage matches).
Cc: <[email protected]> # v3.15+
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Alim Akhtar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/boot/dts/exynos5420-smdk5420.dts | 3 +++
1 file changed, 3 insertions(+)
--- a/arch/arm/boot/dts/exynos5420-smdk5420.dts
+++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts
@@ -124,6 +124,9 @@
hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&hdmi_hpd_irq>;
+ vdd-supply = <&ldo6_reg>;
+ vdd_osc-supply = <&ldo7_reg>;
+ vdd_pll-supply = <&ldo6_reg>;
};
&hsi2c_4 {
From: Jakob Koschel <[email protected]>
[ Upstream commit fa1321b11bd01752f5be2415e74a0e1a7c378262 ]
'gtm' will *always* be set by list_for_each_entry().
It is incorrect to assume that the iterator value will be NULL if the
list is empty.
Instead of checking the pointer it should be checked if
the list is empty.
Fixes: 83ff9dcf375c ("powerpc/sysdev: implement FSL GTM support")
Signed-off-by: Jakob Koschel <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/sysdev/fsl_gtm.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/sysdev/fsl_gtm.c b/arch/powerpc/sysdev/fsl_gtm.c
index 8963eaffb1b7..39186ad6b3c3 100644
--- a/arch/powerpc/sysdev/fsl_gtm.c
+++ b/arch/powerpc/sysdev/fsl_gtm.c
@@ -86,7 +86,7 @@ static LIST_HEAD(gtms);
*/
struct gtm_timer *gtm_get_timer16(void)
{
- struct gtm *gtm = NULL;
+ struct gtm *gtm;
int i;
list_for_each_entry(gtm, >ms, list_node) {
@@ -103,7 +103,7 @@ struct gtm_timer *gtm_get_timer16(void)
spin_unlock_irq(>m->lock);
}
- if (gtm)
+ if (!list_empty(>ms))
return ERR_PTR(-EBUSY);
return ERR_PTR(-ENODEV);
}
--
2.34.1
From: Jaegeuk Kim <[email protected]>
[ Upstream commit 2fef99b8372c1ae3d8445ab570e888b5a358dbe9 ]
This patch fixes xfstests/generic/475 failure.
[ 293.680694] F2FS-fs (dm-1): May loss orphan inode, run fsck to fix.
[ 293.685358] Buffer I/O error on dev dm-1, logical block 8388592, async page read
[ 293.691527] Buffer I/O error on dev dm-1, logical block 8388592, async page read
[ 293.691764] sh (7615): drop_caches: 3
[ 293.691819] sh (7616): drop_caches: 3
[ 293.694017] Buffer I/O error on dev dm-1, logical block 1, async page read
[ 293.695659] sh (7618): drop_caches: 3
[ 293.696979] sh (7617): drop_caches: 3
[ 293.700290] sh (7623): drop_caches: 3
[ 293.708621] sh (7626): drop_caches: 3
[ 293.711386] sh (7628): drop_caches: 3
[ 293.711825] sh (7627): drop_caches: 3
[ 293.716738] sh (7630): drop_caches: 3
[ 293.719613] sh (7632): drop_caches: 3
[ 293.720971] sh (7633): drop_caches: 3
[ 293.727741] sh (7634): drop_caches: 3
[ 293.730783] sh (7636): drop_caches: 3
[ 293.732681] sh (7635): drop_caches: 3
[ 293.732988] sh (7637): drop_caches: 3
[ 293.738836] sh (7639): drop_caches: 3
[ 293.740568] sh (7641): drop_caches: 3
[ 293.743053] sh (7640): drop_caches: 3
[ 293.821889] ------------[ cut here ]------------
[ 293.824654] kernel BUG at fs/f2fs/node.c:3334!
[ 293.826226] invalid opcode: 0000 [#1] PREEMPT SMP PTI
[ 293.828713] CPU: 0 PID: 7653 Comm: umount Tainted: G OE 5.17.0-rc1-custom #1
[ 293.830946] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
[ 293.832526] RIP: 0010:f2fs_destroy_node_manager+0x33f/0x350 [f2fs]
[ 293.833905] Code: e8 d6 3d f9 f9 48 8b 45 d0 65 48 2b 04 25 28 00 00 00 75 1a 48 81 c4 28 03 00 00 5b 41 5c 41 5d 41 5e 41 5f 5d c3 0f 0b
[ 293.837783] RSP: 0018:ffffb04ec31e7a20 EFLAGS: 00010202
[ 293.839062] RAX: 0000000000000001 RBX: ffff9df947db2eb8 RCX: 0000000080aa0072
[ 293.840666] RDX: 0000000000000000 RSI: ffffe86c0432a140 RDI: ffffffffc0b72a21
[ 293.842261] RBP: ffffb04ec31e7d70 R08: ffff9df94ca85780 R09: 0000000080aa0072
[ 293.843909] R10: ffff9df94ca85700 R11: ffff9df94e1ccf58 R12: ffff9df947db2e00
[ 293.845594] R13: ffff9df947db2ed0 R14: ffff9df947db2eb8 R15: ffff9df947db2eb8
[ 293.847855] FS: 00007f5a97379800(0000) GS:ffff9dfa77c00000(0000) knlGS:0000000000000000
[ 293.850647] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 293.852940] CR2: 00007f5a97528730 CR3: 000000010bc76005 CR4: 0000000000370ef0
[ 293.854680] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 293.856423] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 293.858380] Call Trace:
[ 293.859302] <TASK>
[ 293.860311] ? ttwu_do_wakeup+0x1c/0x170
[ 293.861800] ? ttwu_do_activate+0x6d/0xb0
[ 293.863057] ? _raw_spin_unlock_irqrestore+0x29/0x40
[ 293.864411] ? try_to_wake_up+0x9d/0x5e0
[ 293.865618] ? debug_smp_processor_id+0x17/0x20
[ 293.866934] ? debug_smp_processor_id+0x17/0x20
[ 293.868223] ? free_unref_page+0xbf/0x120
[ 293.869470] ? __free_slab+0xcb/0x1c0
[ 293.870614] ? preempt_count_add+0x7a/0xc0
[ 293.871811] ? __slab_free+0xa0/0x2d0
[ 293.872918] ? __wake_up_common_lock+0x8a/0xc0
[ 293.874186] ? __slab_free+0xa0/0x2d0
[ 293.875305] ? free_inode_nonrcu+0x20/0x20
[ 293.876466] ? free_inode_nonrcu+0x20/0x20
[ 293.877650] ? debug_smp_processor_id+0x17/0x20
[ 293.878949] ? call_rcu+0x11a/0x240
[ 293.880060] ? f2fs_destroy_stats+0x59/0x60 [f2fs]
[ 293.881437] ? kfree+0x1fe/0x230
[ 293.882674] f2fs_put_super+0x160/0x390 [f2fs]
[ 293.883978] generic_shutdown_super+0x7a/0x120
[ 293.885274] kill_block_super+0x27/0x50
[ 293.886496] kill_f2fs_super+0x7f/0x100 [f2fs]
[ 293.887806] deactivate_locked_super+0x35/0xa0
[ 293.889271] deactivate_super+0x40/0x50
[ 293.890513] cleanup_mnt+0x139/0x190
[ 293.891689] __cleanup_mnt+0x12/0x20
[ 293.892850] task_work_run+0x64/0xa0
[ 293.894035] exit_to_user_mode_prepare+0x1b7/0x1c0
[ 293.895409] syscall_exit_to_user_mode+0x27/0x50
[ 293.896872] do_syscall_64+0x48/0xc0
[ 293.898090] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 293.899517] RIP: 0033:0x7f5a975cd25b
Fixes: 7735730d39d7 ("f2fs: fix to propagate error from __get_meta_page()")
Reviewed-by: Chao Yu <[email protected]>
Signed-off-by: Jaegeuk Kim <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/f2fs/inode.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/fs/f2fs/inode.c b/fs/f2fs/inode.c
index a35fcf43ad5a..98483f50e5e9 100644
--- a/fs/f2fs/inode.c
+++ b/fs/f2fs/inode.c
@@ -848,6 +848,7 @@ void f2fs_handle_failed_inode(struct inode *inode)
err = f2fs_get_node_info(sbi, inode->i_ino, &ni);
if (err) {
set_sbi_flag(sbi, SBI_NEED_FSCK);
+ set_inode_flag(inode, FI_FREE_NID);
f2fs_warn(sbi, "May loss orphan inode, run fsck to fix.");
goto out;
}
--
2.34.1
From: Paolo Bonzini <[email protected]>
commit 2a8859f373b0a86f0ece8ec8312607eacf12485d upstream.
FNAME(cmpxchg_gpte) is an inefficient mess. It is at least decent if it
can go through get_user_pages_fast(), but if it cannot then it tries to
use memremap(); that is not just terribly slow, it is also wrong because
it assumes that the VM_PFNMAP VMA is contiguous.
The right way to do it would be to do the same thing as
hva_to_pfn_remapped() does since commit add6a0cd1c5b ("KVM: MMU: try to
fix up page faults before giving up", 2016-07-05), using follow_pte()
and fixup_user_fault() to determine the correct address to use for
memremap(). To do this, one could for example extract hva_to_pfn()
for use outside virt/kvm/kvm_main.c. But really there is no reason to
do that either, because there is already a perfectly valid address to
do the cmpxchg() on, only it is a userspace address. That means doing
user_access_begin()/user_access_end() and writing the code in assembly
to handle exceptions correctly. Worse, the guest PTE can be 8-byte
even on i686 so there is the extra complication of using cmpxchg8b to
account for. But at least it is an efficient mess.
(Thanks to Linus for suggesting improvement on the inline assembly).
Reported-by: Qiuhao Li <[email protected]>
Reported-by: Gaoning Pan <[email protected]>
Reported-by: Yongkang Jia <[email protected]>
Reported-by: [email protected]
Debugged-by: Tadeusz Struk <[email protected]>
Tested-by: Maxim Levitsky <[email protected]>
Cc: [email protected]
Fixes: bd53cb35a3e9 ("X86/KVM: Handle PFNs outside of kernel reach when touching GPTEs")
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kvm/mmu/paging_tmpl.h | 77 +++++++++++++++++++----------------------
1 file changed, 37 insertions(+), 40 deletions(-)
--- a/arch/x86/kvm/mmu/paging_tmpl.h
+++ b/arch/x86/kvm/mmu/paging_tmpl.h
@@ -34,9 +34,8 @@
#define PT_HAVE_ACCESSED_DIRTY(mmu) true
#ifdef CONFIG_X86_64
#define PT_MAX_FULL_LEVELS PT64_ROOT_MAX_LEVEL
- #define CMPXCHG cmpxchg
+ #define CMPXCHG "cmpxchgq"
#else
- #define CMPXCHG cmpxchg64
#define PT_MAX_FULL_LEVELS 2
#endif
#elif PTTYPE == 32
@@ -52,7 +51,7 @@
#define PT_GUEST_DIRTY_SHIFT PT_DIRTY_SHIFT
#define PT_GUEST_ACCESSED_SHIFT PT_ACCESSED_SHIFT
#define PT_HAVE_ACCESSED_DIRTY(mmu) true
- #define CMPXCHG cmpxchg
+ #define CMPXCHG "cmpxchgl"
#elif PTTYPE == PTTYPE_EPT
#define pt_element_t u64
#define guest_walker guest_walkerEPT
@@ -65,7 +64,9 @@
#define PT_GUEST_DIRTY_SHIFT 9
#define PT_GUEST_ACCESSED_SHIFT 8
#define PT_HAVE_ACCESSED_DIRTY(mmu) ((mmu)->ept_ad)
- #define CMPXCHG cmpxchg64
+ #ifdef CONFIG_X86_64
+ #define CMPXCHG "cmpxchgq"
+ #endif
#define PT_MAX_FULL_LEVELS PT64_ROOT_MAX_LEVEL
#else
#error Invalid PTTYPE value
@@ -147,43 +148,39 @@ static int FNAME(cmpxchg_gpte)(struct kv
pt_element_t __user *ptep_user, unsigned index,
pt_element_t orig_pte, pt_element_t new_pte)
{
- int npages;
- pt_element_t ret;
- pt_element_t *table;
- struct page *page;
-
- npages = get_user_pages_fast((unsigned long)ptep_user, 1, FOLL_WRITE, &page);
- if (likely(npages == 1)) {
- table = kmap_atomic(page);
- ret = CMPXCHG(&table[index], orig_pte, new_pte);
- kunmap_atomic(table);
-
- kvm_release_page_dirty(page);
- } else {
- struct vm_area_struct *vma;
- unsigned long vaddr = (unsigned long)ptep_user & PAGE_MASK;
- unsigned long pfn;
- unsigned long paddr;
-
- mmap_read_lock(current->mm);
- vma = find_vma_intersection(current->mm, vaddr, vaddr + PAGE_SIZE);
- if (!vma || !(vma->vm_flags & VM_PFNMAP)) {
- mmap_read_unlock(current->mm);
- return -EFAULT;
- }
- pfn = ((vaddr - vma->vm_start) >> PAGE_SHIFT) + vma->vm_pgoff;
- paddr = pfn << PAGE_SHIFT;
- table = memremap(paddr, PAGE_SIZE, MEMREMAP_WB);
- if (!table) {
- mmap_read_unlock(current->mm);
- return -EFAULT;
- }
- ret = CMPXCHG(&table[index], orig_pte, new_pte);
- memunmap(table);
- mmap_read_unlock(current->mm);
- }
+ int r = -EFAULT;
+
+ if (!user_access_begin(ptep_user, sizeof(pt_element_t)))
+ return -EFAULT;
+
+#ifdef CMPXCHG
+ asm volatile("1:" LOCK_PREFIX CMPXCHG " %[new], %[ptr]\n"
+ "mov $0, %[r]\n"
+ "setnz %b[r]\n"
+ "2:"
+ _ASM_EXTABLE_UA(1b, 2b)
+ : [ptr] "+m" (*ptep_user),
+ [old] "+a" (orig_pte),
+ [r] "+q" (r)
+ : [new] "r" (new_pte)
+ : "memory");
+#else
+ asm volatile("1:" LOCK_PREFIX "cmpxchg8b %[ptr]\n"
+ "movl $0, %[r]\n"
+ "jz 2f\n"
+ "incl %[r]\n"
+ "2:"
+ _ASM_EXTABLE_UA(1b, 2b)
+ : [ptr] "+m" (*ptep_user),
+ [old] "+A" (orig_pte),
+ [r] "+rm" (r)
+ : [new_lo] "b" ((u32)new_pte),
+ [new_hi] "c" ((u32)(new_pte >> 32))
+ : "memory");
+#endif
- return (ret != orig_pte);
+ user_access_end();
+ return r;
}
static bool FNAME(prefetch_invalid_gpte)(struct kvm_vcpu *vcpu,
From: Andy Shevchenko <[email protected]>
[ Upstream commit 609d7ffdc42199a0ec949db057e3b4be6745d6c5 ]
The pci_get_slot() increases its reference count, the caller
must decrement the reference count by calling pci_dev_put().
Fixes: 743485ea3bee ("spi: pxa2xx-pci: Do a specific setup in a separate function")
Fixes: 25014521603f ("spi: pxa2xx-pci: Enable DMA for Intel Merrifield")
Reported-by: Wang Qing <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/spi/spi-pxa2xx-pci.c | 17 ++++++++++++++++-
1 file changed, 16 insertions(+), 1 deletion(-)
diff --git a/drivers/spi/spi-pxa2xx-pci.c b/drivers/spi/spi-pxa2xx-pci.c
index aafac128bb5f..4eb979a096c7 100644
--- a/drivers/spi/spi-pxa2xx-pci.c
+++ b/drivers/spi/spi-pxa2xx-pci.c
@@ -74,14 +74,23 @@ static bool lpss_dma_filter(struct dma_chan *chan, void *param)
return true;
}
+static void lpss_dma_put_device(void *dma_dev)
+{
+ pci_dev_put(dma_dev);
+}
+
static int lpss_spi_setup(struct pci_dev *dev, struct pxa_spi_info *c)
{
struct pci_dev *dma_dev;
+ int ret;
c->num_chipselect = 1;
c->max_clk_rate = 50000000;
dma_dev = pci_get_slot(dev->bus, PCI_DEVFN(PCI_SLOT(dev->devfn), 0));
+ ret = devm_add_action_or_reset(&dev->dev, lpss_dma_put_device, dma_dev);
+ if (ret)
+ return ret;
if (c->tx_param) {
struct dw_dma_slave *slave = c->tx_param;
@@ -105,8 +114,9 @@ static int lpss_spi_setup(struct pci_dev *dev, struct pxa_spi_info *c)
static int mrfld_spi_setup(struct pci_dev *dev, struct pxa_spi_info *c)
{
- struct pci_dev *dma_dev = pci_get_slot(dev->bus, PCI_DEVFN(21, 0));
struct dw_dma_slave *tx, *rx;
+ struct pci_dev *dma_dev;
+ int ret;
switch (PCI_FUNC(dev->devfn)) {
case 0:
@@ -131,6 +141,11 @@ static int mrfld_spi_setup(struct pci_dev *dev, struct pxa_spi_info *c)
return -ENODEV;
}
+ dma_dev = pci_get_slot(dev->bus, PCI_DEVFN(21, 0));
+ ret = devm_add_action_or_reset(&dev->dev, lpss_dma_put_device, dma_dev);
+ if (ret)
+ return ret;
+
tx = c->tx_param;
tx->dma_dev = &dma_dev->dev;
--
2.34.1
From: Håkon Bugge <[email protected]>
[ Upstream commit 748663c8ccf6b2e5a800de19127c2cc1c4423fd2 ]
XRC INI QPs should be able to adjust their local ACK timeout.
Fixes: 2c1619edef61 ("IB/cma: Define option to set ack timeout and pack tos_set")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Håkon Bugge <[email protected]>
Suggested-by: Avneesh Pant <[email protected]>
Reviewed-by: Leon Romanovsky <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/core/cma.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c
index fbb0efbe25f8..3c40aa50cd60 100644
--- a/drivers/infiniband/core/cma.c
+++ b/drivers/infiniband/core/cma.c
@@ -2635,7 +2635,7 @@ int rdma_set_ack_timeout(struct rdma_cm_id *id, u8 timeout)
{
struct rdma_id_private *id_priv;
- if (id->qp_type != IB_QPT_RC)
+ if (id->qp_type != IB_QPT_RC && id->qp_type != IB_QPT_XRC_INI)
return -EINVAL;
id_priv = container_of(id, struct rdma_id_private, id);
--
2.34.1
From: Eric Biggers <[email protected]>
commit a24611ea356c7f3f0ec926da11b9482ac1f414fd upstream.
Before checking whether the expected digest_info is present, we need to
check that there are enough bytes remaining.
Fixes: a49de377e051 ("crypto: Add hash param to pkcs1pad")
Cc: <[email protected]> # v4.6+
Cc: Tadeusz Struk <[email protected]>
Signed-off-by: Eric Biggers <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
crypto/rsa-pkcs1pad.c | 2 ++
1 file changed, 2 insertions(+)
--- a/crypto/rsa-pkcs1pad.c
+++ b/crypto/rsa-pkcs1pad.c
@@ -476,6 +476,8 @@ static int pkcs1pad_verify_complete(stru
pos++;
if (digest_info) {
+ if (digest_info->size > dst_len - pos)
+ goto done;
if (crypto_memneq(out_buf + pos, digest_info->data,
digest_info->size))
goto done;
From: Chen Jingwen <[email protected]>
commit dd75080aa8409ce10d50fb58981c6b59bf8707d3 upstream.
The shadow's page table is not updated when PTE_RPN_SHIFT is 24
and PAGE_SHIFT is 12. It not only causes false positives but
also false negative as shown the following text.
Fix it by bringing the logic of kasan_early_shadow_page_entry here.
1. False Positive:
==================================================================
BUG: KASAN: vmalloc-out-of-bounds in pcpu_alloc+0x508/0xa50
Write of size 16 at addr f57f3be0 by task swapper/0/1
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.15.0-12267-gdebe436e77c7 #1
Call Trace:
[c80d1c20] [c07fe7b8] dump_stack_lvl+0x4c/0x6c (unreliable)
[c80d1c40] [c02ff668] print_address_description.constprop.0+0x88/0x300
[c80d1c70] [c02ff45c] kasan_report+0x1ec/0x200
[c80d1cb0] [c0300b20] kasan_check_range+0x160/0x2f0
[c80d1cc0] [c03018a4] memset+0x34/0x90
[c80d1ce0] [c0280108] pcpu_alloc+0x508/0xa50
[c80d1d40] [c02fd7bc] __kmem_cache_create+0xfc/0x570
[c80d1d70] [c0283d64] kmem_cache_create_usercopy+0x274/0x3e0
[c80d1db0] [c2036580] init_sd+0xc4/0x1d0
[c80d1de0] [c00044a0] do_one_initcall+0xc0/0x33c
[c80d1eb0] [c2001624] kernel_init_freeable+0x2c8/0x384
[c80d1ef0] [c0004b14] kernel_init+0x24/0x170
[c80d1f10] [c001b26c] ret_from_kernel_thread+0x5c/0x64
Memory state around the buggy address:
f57f3a80: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
f57f3b00: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
>f57f3b80: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
^
f57f3c00: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
f57f3c80: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
==================================================================
2. False Negative (with KASAN tests):
==================================================================
Before fix:
ok 45 - kmalloc_double_kzfree
# vmalloc_oob: EXPECTATION FAILED at lib/test_kasan.c:1039
KASAN failure expected in "((volatile char *)area)[3100]", but none occurred
not ok 46 - vmalloc_oob
not ok 1 - kasan
==================================================================
After fix:
ok 1 - kasan
Fixes: cbd18991e24fe ("powerpc/mm: Fix an Oops in kasan_mmu_init()")
Cc: [email protected] # 5.4.x
Signed-off-by: Chen Jingwen <[email protected]>
Reviewed-by: Christophe Leroy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/mm/kasan/kasan_init_32.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
--- a/arch/powerpc/mm/kasan/kasan_init_32.c
+++ b/arch/powerpc/mm/kasan/kasan_init_32.c
@@ -83,13 +83,12 @@ void __init
kasan_update_early_region(unsigned long k_start, unsigned long k_end, pte_t pte)
{
unsigned long k_cur;
- phys_addr_t pa = __pa(kasan_early_shadow_page);
for (k_cur = k_start; k_cur != k_end; k_cur += PAGE_SIZE) {
pmd_t *pmd = pmd_off_k(k_cur);
pte_t *ptep = pte_offset_kernel(pmd, k_cur);
- if ((pte_val(*ptep) & PTE_RPN_MASK) != pa)
+ if (pte_page(*ptep) != virt_to_page(lm_alias(kasan_early_shadow_page)))
continue;
__set_pte_at(&init_mm, k_cur, ptep, pte, 0);
From: Ido Schimmel <[email protected]>
[ Upstream commit b50d3b46f84282d795ae3076111acb75ae1031f3 ]
The purpose of the last test case is to test VXLAN encapsulation and
decapsulation when the underlay lookup takes place in a non-default VRF.
This is achieved by enslaving the physical device of the tunnel to a
VRF.
The binding of the VXLAN UDP socket to the VRF happens when the VXLAN
device itself is opened, not when its physical device is opened. This
was also mentioned in the cited commit ("tests that moving the underlay
from a VRF to another works when down/up the VXLAN interface"), but the
test did something else.
Fix it by reopening the VXLAN device instead of its physical device.
Before:
# ./test_vxlan_under_vrf.sh
Checking HV connectivity [ OK ]
Check VM connectivity through VXLAN (underlay in the default VRF) [ OK ]
Check VM connectivity through VXLAN (underlay in a VRF) [FAIL]
After:
# ./test_vxlan_under_vrf.sh
Checking HV connectivity [ OK ]
Check VM connectivity through VXLAN (underlay in the default VRF) [ OK ]
Check VM connectivity through VXLAN (underlay in a VRF) [ OK ]
Fixes: 03f1c26b1c56 ("test/net: Add script for VXLAN underlay in a VRF")
Signed-off-by: Ido Schimmel <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/net/test_vxlan_under_vrf.sh | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/tools/testing/selftests/net/test_vxlan_under_vrf.sh b/tools/testing/selftests/net/test_vxlan_under_vrf.sh
index 09f9ed92cbe4..a44b9aca7427 100755
--- a/tools/testing/selftests/net/test_vxlan_under_vrf.sh
+++ b/tools/testing/selftests/net/test_vxlan_under_vrf.sh
@@ -118,11 +118,11 @@ echo "[ OK ]"
# Move the underlay to a non-default VRF
ip -netns hv-1 link set veth0 vrf vrf-underlay
-ip -netns hv-1 link set veth0 down
-ip -netns hv-1 link set veth0 up
+ip -netns hv-1 link set vxlan0 down
+ip -netns hv-1 link set vxlan0 up
ip -netns hv-2 link set veth0 vrf vrf-underlay
-ip -netns hv-2 link set veth0 down
-ip -netns hv-2 link set veth0 up
+ip -netns hv-2 link set vxlan0 down
+ip -netns hv-2 link set vxlan0 up
echo -n "Check VM connectivity through VXLAN (underlay in a VRF) "
ip netns exec vm-1 ping -c 1 -W 1 10.0.0.2 &> /dev/null || (echo "[FAIL]"; false)
--
2.34.1
From: Chen-Yu Tsai <[email protected]>
[ Upstream commit 54fe55fb384ade630ef20b9a8b8f3b2a89ad97f2 ]
mtk_pconf_group_get(), used to read back pingroup pin config state,
simply returns a set of configs saved from a previous invocation of
mtk_pconf_group_set(). This is an unfiltered, unvalidated set passed
in from the pinconf core, which does not match the current hardware
state.
Since the driver library is designed to have one pin per group, pass
through mtk_pconf_group_get() to mtk_pinconf_get(), to read back the
current pin config state of the only pin in the group.
Also drop the assignment of pin config state to the group.
Fixes: 805250982bb5 ("pinctrl: mediatek: add pinctrl-paris that implements the vendor dt-bindings")
Signed-off-by: Chen-Yu Tsai <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pinctrl/mediatek/pinctrl-paris.c | 8 +++-----
1 file changed, 3 insertions(+), 5 deletions(-)
diff --git a/drivers/pinctrl/mediatek/pinctrl-paris.c b/drivers/pinctrl/mediatek/pinctrl-paris.c
index 9b268ad4e1b8..2f3c65265e23 100644
--- a/drivers/pinctrl/mediatek/pinctrl-paris.c
+++ b/drivers/pinctrl/mediatek/pinctrl-paris.c
@@ -714,10 +714,10 @@ static int mtk_pconf_group_get(struct pinctrl_dev *pctldev, unsigned group,
unsigned long *config)
{
struct mtk_pinctrl *hw = pinctrl_dev_get_drvdata(pctldev);
+ struct mtk_pinctrl_group *grp = &hw->groups[group];
- *config = hw->groups[group].config;
-
- return 0;
+ /* One pin per group only */
+ return mtk_pinconf_get(pctldev, grp->pin, config);
}
static int mtk_pconf_group_set(struct pinctrl_dev *pctldev, unsigned group,
@@ -733,8 +733,6 @@ static int mtk_pconf_group_set(struct pinctrl_dev *pctldev, unsigned group,
pinconf_to_config_argument(configs[i]));
if (ret < 0)
return ret;
-
- grp->config = configs[i];
}
return 0;
--
2.34.1
From: Konrad Dybcio <[email protected]>
[ Upstream commit 71021db1c532c2545ae53b9ee85b37b7154f51d4 ]
The gpll4 postdiv is actually a div4, so make sure that Linux is aware of
this.
This fixes the following error messages:
mmc1: Card appears overclocked; req 200000000 Hz, actual 343999999 Hz
mmc1: Card appears overclocked; req 400000000 Hz, actual 687999999 Hz
Fixes: aec89f78cf01 ("clk: qcom: Add support for msm8994 global clock controller")
Signed-off-by: Konrad Dybcio <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Tested-by: Petr Vorel <[email protected]>
Reviewed-by: Petr Vorel <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/qcom/gcc-msm8994.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/clk/qcom/gcc-msm8994.c b/drivers/clk/qcom/gcc-msm8994.c
index 144d2ba7a9be..463a444c8a7e 100644
--- a/drivers/clk/qcom/gcc-msm8994.c
+++ b/drivers/clk/qcom/gcc-msm8994.c
@@ -108,6 +108,7 @@ static struct clk_alpha_pll gpll4_early = {
static struct clk_alpha_pll_postdiv gpll4 = {
.offset = 0x1dc0,
+ .width = 4,
.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_DEFAULT],
.clkr.hw.init = &(struct clk_init_data)
{
--
2.34.1
From: Miaoqian Lin <[email protected]>
[ Upstream commit 0ff027027e05a866491bbb53494f0e2a61354c85 ]
The reference taken by 'of_find_device_by_node()' must be released when
not needed anymore.
Add the corresponding 'put_device()' in the error handling path.
Fixes: 01f937ffc468 ("soc: qcom: ocmem: don't return NULL in of_get_ocmem")
Signed-off-by: Miaoqian Lin <[email protected]>
Signed-off-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/soc/qcom/ocmem.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/soc/qcom/ocmem.c b/drivers/soc/qcom/ocmem.c
index f1875dc31ae2..85f82e195ef8 100644
--- a/drivers/soc/qcom/ocmem.c
+++ b/drivers/soc/qcom/ocmem.c
@@ -206,6 +206,7 @@ struct ocmem *of_get_ocmem(struct device *dev)
ocmem = platform_get_drvdata(pdev);
if (!ocmem) {
dev_err(dev, "Cannot get ocmem\n");
+ put_device(&pdev->dev);
return ERR_PTR(-ENODEV);
}
return ocmem;
--
2.34.1
From: Miaoqian Lin <[email protected]>
[ Upstream commit 6ae0a4d8fec551ec581d620f0eb1fe31f755551c ]
This function only calls of_node_put() in the regular path.
And it will cause refcount leak in error paths.
For example, when codec_np is NULL, saif_np[0] and saif_np[1]
are not NULL, it will cause leaks.
of_node_put() will check if the node pointer is NULL, so we can
call it directly to release the refcount of regular pointers.
Fixes: e968194b45c4 ("ASoC: mxs: add device tree support for mxs-sgtl5000")
Signed-off-by: Miaoqian Lin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/mxs/mxs-sgtl5000.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/sound/soc/mxs/mxs-sgtl5000.c b/sound/soc/mxs/mxs-sgtl5000.c
index a6407f4388de..fb721bc49949 100644
--- a/sound/soc/mxs/mxs-sgtl5000.c
+++ b/sound/soc/mxs/mxs-sgtl5000.c
@@ -118,6 +118,9 @@ static int mxs_sgtl5000_probe(struct platform_device *pdev)
codec_np = of_parse_phandle(np, "audio-codec", 0);
if (!saif_np[0] || !saif_np[1] || !codec_np) {
dev_err(&pdev->dev, "phandle missing or invalid\n");
+ of_node_put(codec_np);
+ of_node_put(saif_np[0]);
+ of_node_put(saif_np[1]);
return -EINVAL;
}
--
2.34.1
From: Marijn Suijten <[email protected]>
[ Upstream commit 7823e5aa5d1dd9ed5849923c165eb8f29ad23c54 ]
Member assignments to qcom_scm_desc were moved into struct initializers
in 57d3b816718c ("firmware: qcom_scm: Remove thin wrappers") including
the case in qcom_scm_iommu_secure_ptbl_init, except that the - now
duplicate - assignment to desc was left in place. While not harmful,
remove this unnecessary extra reassignment.
Fixes: 57d3b816718c ("firmware: qcom_scm: Remove thin wrappers")
Signed-off-by: Marijn Suijten <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Reviewed-by: Alex Elder <[email protected]>
Signed-off-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/firmware/qcom_scm.c | 6 ------
1 file changed, 6 deletions(-)
diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c
index e10a99860ca4..d417199f8fe9 100644
--- a/drivers/firmware/qcom_scm.c
+++ b/drivers/firmware/qcom_scm.c
@@ -749,12 +749,6 @@ int qcom_scm_iommu_secure_ptbl_init(u64 addr, u32 size, u32 spare)
};
int ret;
- desc.args[0] = addr;
- desc.args[1] = size;
- desc.args[2] = spare;
- desc.arginfo = QCOM_SCM_ARGS(3, QCOM_SCM_RW, QCOM_SCM_VAL,
- QCOM_SCM_VAL);
-
ret = qcom_scm_call(__scm->dev, &desc, NULL);
/* the pg table has been initialized already, ignore the error */
--
2.34.1
From: Jing Yao <[email protected]>
[ Upstream commit f63658a59c3d439c8ad7b290f8ec270980e0f384 ]
Use sysfs_emit instead of scnprintf, snprintf or sprintf.
Reported-by: Zeal Robot <[email protected]>
Signed-off-by: Jing Yao <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/video/fbdev/omap2/omapfb/displays/panel-dsi-cm.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/video/fbdev/omap2/omapfb/displays/panel-dsi-cm.c b/drivers/video/fbdev/omap2/omapfb/displays/panel-dsi-cm.c
index 4b0793abdd84..a2c7c5cb1523 100644
--- a/drivers/video/fbdev/omap2/omapfb/displays/panel-dsi-cm.c
+++ b/drivers/video/fbdev/omap2/omapfb/displays/panel-dsi-cm.c
@@ -409,7 +409,7 @@ static ssize_t dsicm_num_errors_show(struct device *dev,
if (r)
return r;
- return snprintf(buf, PAGE_SIZE, "%d\n", errors);
+ return sysfs_emit(buf, "%d\n", errors);
}
static ssize_t dsicm_hw_revision_show(struct device *dev,
@@ -439,7 +439,7 @@ static ssize_t dsicm_hw_revision_show(struct device *dev,
if (r)
return r;
- return snprintf(buf, PAGE_SIZE, "%02x.%02x.%02x\n", id1, id2, id3);
+ return sysfs_emit(buf, "%02x.%02x.%02x\n", id1, id2, id3);
}
static ssize_t dsicm_store_ulps(struct device *dev,
@@ -487,7 +487,7 @@ static ssize_t dsicm_show_ulps(struct device *dev,
t = ddata->ulps_enabled;
mutex_unlock(&ddata->lock);
- return snprintf(buf, PAGE_SIZE, "%u\n", t);
+ return sysfs_emit(buf, "%u\n", t);
}
static ssize_t dsicm_store_ulps_timeout(struct device *dev,
@@ -532,7 +532,7 @@ static ssize_t dsicm_show_ulps_timeout(struct device *dev,
t = ddata->ulps_timeout;
mutex_unlock(&ddata->lock);
- return snprintf(buf, PAGE_SIZE, "%u\n", t);
+ return sysfs_emit(buf, "%u\n", t);
}
static DEVICE_ATTR(num_dsi_errors, S_IRUGO, dsicm_num_errors_show, NULL);
--
2.34.1
From: Oliver Hartkopp <[email protected]>
[ Upstream commit 42bf50a1795a1854d48717b7361dbdbce496b16b ]
When providing the MSG_TRUNC flag via recvmsg() syscall the return value
provides the real length of the packet or datagram, even when it was longer
than the passed buffer.
Fixes: e057dd3fc20f ("can: add ISO 15765-2:2016 transport protocol")
Link: https://github.com/linux-can/can-utils/issues/347#issuecomment-1065932671
Link: https://lore.kernel.org/all/[email protected]
Suggested-by: Derek Will <[email protected]>
Signed-off-by: Oliver Hartkopp <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/can/isotp.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/net/can/isotp.c b/net/can/isotp.c
index cb5546c186bc..518014506fff 100644
--- a/net/can/isotp.c
+++ b/net/can/isotp.c
@@ -1004,29 +1004,28 @@ static int isotp_recvmsg(struct socket *sock, struct msghdr *msg, size_t size,
struct sock *sk = sock->sk;
struct sk_buff *skb;
struct isotp_sock *so = isotp_sk(sk);
- int err = 0;
- int noblock;
+ int noblock = flags & MSG_DONTWAIT;
+ int ret = 0;
- noblock = flags & MSG_DONTWAIT;
- flags &= ~MSG_DONTWAIT;
+ if (flags & ~(MSG_DONTWAIT | MSG_TRUNC))
+ return -EINVAL;
if (!so->bound)
return -EADDRNOTAVAIL;
- skb = skb_recv_datagram(sk, flags, noblock, &err);
+ flags &= ~MSG_DONTWAIT;
+ skb = skb_recv_datagram(sk, flags, noblock, &ret);
if (!skb)
- return err;
+ return ret;
if (size < skb->len)
msg->msg_flags |= MSG_TRUNC;
else
size = skb->len;
- err = memcpy_to_msg(msg, skb->data, size);
- if (err < 0) {
- skb_free_datagram(sk, skb);
- return err;
- }
+ ret = memcpy_to_msg(msg, skb->data, size);
+ if (ret < 0)
+ goto out_err;
sock_recv_timestamp(msg, sk, skb);
@@ -1036,9 +1035,13 @@ static int isotp_recvmsg(struct socket *sock, struct msghdr *msg, size_t size,
memcpy(msg->msg_name, skb->cb, msg->msg_namelen);
}
+ /* set length of return value */
+ ret = (flags & MSG_TRUNC) ? skb->len : size;
+
+out_err:
skb_free_datagram(sk, skb);
- return size;
+ return ret;
}
static int isotp_release(struct socket *sock)
--
2.34.1
From: Pavel Skripkin <[email protected]>
[ Upstream commit 9d7cbe2b9cf5f650067df4f402fdd799d4bbb4e1 ]
kvartet reported, that hci_uart_tx_wakeup() uses uninitialized rwsem.
The problem was in wrong place for percpu_init_rwsem() call.
hci_uart_proto::open() may register a timer whose callback may call
hci_uart_tx_wakeup(). There is a chance, that hci_uart_register_device()
thread won't be fast enough to call percpu_init_rwsem().
Fix it my moving percpu_init_rwsem() call before p->open().
INFO: trying to register non-static key.
The code is fine but needs lockdep annotation, or maybe
you didn't initialize this object before use?
turning off the locking correctness validator.
CPU: 2 PID: 18524 Comm: syz-executor.5 Not tainted 5.16.0-rc6 #9
...
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
assign_lock_key kernel/locking/lockdep.c:951 [inline]
register_lock_class+0x148d/0x1950 kernel/locking/lockdep.c:1263
__lock_acquire+0x106/0x57e0 kernel/locking/lockdep.c:4906
lock_acquire kernel/locking/lockdep.c:5637 [inline]
lock_acquire+0x1ab/0x520 kernel/locking/lockdep.c:5602
percpu_down_read_trylock include/linux/percpu-rwsem.h:92 [inline]
hci_uart_tx_wakeup+0x12e/0x490 drivers/bluetooth/hci_ldisc.c:124
h5_timed_event+0x32f/0x6a0 drivers/bluetooth/hci_h5.c:188
call_timer_fn+0x1a5/0x6b0 kernel/time/timer.c:1421
Fixes: d73e17281665 ("Bluetooth: hci_serdev: Init hci_uart proto_lock to avoid oops")
Reported-by: Yiru Xu <[email protected]>
Signed-off-by: Pavel Skripkin <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/bluetooth/hci_serdev.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/bluetooth/hci_serdev.c b/drivers/bluetooth/hci_serdev.c
index 9e03402ef1b3..e9a44ab3812d 100644
--- a/drivers/bluetooth/hci_serdev.c
+++ b/drivers/bluetooth/hci_serdev.c
@@ -305,6 +305,8 @@ int hci_uart_register_device(struct hci_uart *hu,
if (err)
return err;
+ percpu_init_rwsem(&hu->proto_lock);
+
err = p->open(hu);
if (err)
goto err_open;
@@ -327,7 +329,6 @@ int hci_uart_register_device(struct hci_uart *hu,
INIT_WORK(&hu->init_ready, hci_uart_init_work);
INIT_WORK(&hu->write_work, hci_uart_write_work);
- percpu_init_rwsem(&hu->proto_lock);
/* Only when vendor specific setup callback is provided, consider
* the manufacturer information valid. This avoids filling in the
--
2.34.1
From: Shengjiu Wang <[email protected]>
[ Upstream commit f7d344a2bd5ec81fbd1ce76928fd059e57ec9bea ]
In the case like dmaengine which's not a dai but as a component, the
num_dai is zero, dmaengine component has the same component_of_node
as cpu dai, when cpu dai component is not ready, but dmaengine component
is ready, try to get cpu dai name, the snd_soc_get_dai_name() return
-EINVAL, not -EPROBE_DEFER, that cause below error:
asoc-simple-card <card name>: parse error -22
asoc-simple-card: probe of <card name> failed with error -22
The sound card failed to probe.
So this patch fixes the issue above by skipping the zero num_dai
component in searching dai name.
Signed-off-by: Shengjiu Wang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/soc-core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c
index 133296596864..a6d6d10cd471 100644
--- a/sound/soc/soc-core.c
+++ b/sound/soc/soc-core.c
@@ -3020,7 +3020,7 @@ int snd_soc_get_dai_name(struct of_phandle_args *args,
for_each_component(pos) {
component_of_node = soc_component_to_node(pos);
- if (component_of_node != args->np)
+ if (component_of_node != args->np || !pos->num_dai)
continue;
ret = snd_soc_component_of_xlate_dai_name(pos, args, dai_name);
--
2.34.1
From: Miaoqian Lin <[email protected]>
[ Upstream commit 7c442e76c06cb1bef16a6c523487438175584eea ]
rc_dev is allocated by rc_allocate_device(), and doesn't assigned to
ctx->rc_dev before calling rc_free_device(ctx->rc_dev).
So it should call rc_free_device(rc_dev);
Fixes: e25f1f7c94e1 ("drm/bridge/sii8620: add remote control support")
Signed-off-by: Miaoqian Lin <[email protected]>
Reviewed-by: Robert Foss <[email protected]>
Signed-off-by: Robert Foss <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/bridge/sil-sii8620.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/bridge/sil-sii8620.c b/drivers/gpu/drm/bridge/sil-sii8620.c
index 843265d7f1b1..ec7745c31da0 100644
--- a/drivers/gpu/drm/bridge/sil-sii8620.c
+++ b/drivers/gpu/drm/bridge/sil-sii8620.c
@@ -2120,7 +2120,7 @@ static void sii8620_init_rcp_input_dev(struct sii8620 *ctx)
if (ret) {
dev_err(ctx->dev, "Failed to register RC device\n");
ctx->error = ret;
- rc_free_device(ctx->rc_dev);
+ rc_free_device(rc_dev);
return;
}
ctx->rc_dev = rc_dev;
--
2.34.1
From: Hector Martin <[email protected]>
commit 5e90f0f3ead014867dade7a22f93958119f5efab upstream.
This avoids leaking memory if brcmf_chip_get_raminfo fails. Note that
the CLM blob is released in the device remove path.
Fixes: 82f93cf46d60 ("brcmfmac: get chip's default RAM info during PCIe setup")
Reviewed-by: Linus Walleij <[email protected]>
Reviewed-by: Arend van Spriel <[email protected]>
Cc: [email protected]
Signed-off-by: Hector Martin <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
@@ -1775,6 +1775,8 @@ static void brcmf_pcie_setup(struct devi
ret = brcmf_chip_get_raminfo(devinfo->ci);
if (ret) {
brcmf_err(bus, "Failed to get RAM info\n");
+ release_firmware(fw);
+ brcmf_fw_nvram_free(nvram);
goto fail;
}
From: Trond Myklebust <[email protected]>
[ Upstream commit 7c9d845f0612e5bcd23456a2ec43be8ac43458f1 ]
In nfs4_callback_devicenotify(), if we don't find a matching entry for
the deviceid, we're left with a pointer to 'struct nfs_server' that
actually points to the list of super blocks associated with our struct
nfs_client.
Furthermore, even if we have a valid pointer, nothing pins the super
block, and so the struct nfs_server could end up getting freed while
we're using it.
Since all we want is a pointer to the struct pnfs_layoutdriver_type,
let's skip all the iteration over super blocks, and just use APIs to
find the layout driver directly.
Reported-by: Xiaomeng Tong <[email protected]>
Fixes: 1be5683b03a7 ("pnfs: CB_NOTIFY_DEVICEID")
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/nfs/callback_proc.c | 27 +++++++++------------------
fs/nfs/pnfs.c | 11 +++++++++++
fs/nfs/pnfs.h | 2 ++
3 files changed, 22 insertions(+), 18 deletions(-)
diff --git a/fs/nfs/callback_proc.c b/fs/nfs/callback_proc.c
index b44219ce60b8..a5209643ac36 100644
--- a/fs/nfs/callback_proc.c
+++ b/fs/nfs/callback_proc.c
@@ -353,12 +353,11 @@ __be32 nfs4_callback_devicenotify(void *argp, void *resp,
struct cb_process_state *cps)
{
struct cb_devicenotifyargs *args = argp;
+ const struct pnfs_layoutdriver_type *ld = NULL;
uint32_t i;
__be32 res = 0;
- struct nfs_client *clp = cps->clp;
- struct nfs_server *server = NULL;
- if (!clp) {
+ if (!cps->clp) {
res = cpu_to_be32(NFS4ERR_OP_NOT_IN_SESSION);
goto out;
}
@@ -366,23 +365,15 @@ __be32 nfs4_callback_devicenotify(void *argp, void *resp,
for (i = 0; i < args->ndevs; i++) {
struct cb_devicenotifyitem *dev = &args->devs[i];
- if (!server ||
- server->pnfs_curr_ld->id != dev->cbd_layout_type) {
- rcu_read_lock();
- list_for_each_entry_rcu(server, &clp->cl_superblocks, client_link)
- if (server->pnfs_curr_ld &&
- server->pnfs_curr_ld->id == dev->cbd_layout_type) {
- rcu_read_unlock();
- goto found;
- }
- rcu_read_unlock();
- continue;
+ if (!ld || ld->id != dev->cbd_layout_type) {
+ pnfs_put_layoutdriver(ld);
+ ld = pnfs_find_layoutdriver(dev->cbd_layout_type);
+ if (!ld)
+ continue;
}
-
- found:
- nfs4_delete_deviceid(server->pnfs_curr_ld, clp, &dev->cbd_dev_id);
+ nfs4_delete_deviceid(ld, cps->clp, &dev->cbd_dev_id);
}
-
+ pnfs_put_layoutdriver(ld);
out:
kfree(args->devs);
return res;
diff --git a/fs/nfs/pnfs.c b/fs/nfs/pnfs.c
index 5370e082aded..b3b9eff5d572 100644
--- a/fs/nfs/pnfs.c
+++ b/fs/nfs/pnfs.c
@@ -92,6 +92,17 @@ find_pnfs_driver(u32 id)
return local;
}
+const struct pnfs_layoutdriver_type *pnfs_find_layoutdriver(u32 id)
+{
+ return find_pnfs_driver(id);
+}
+
+void pnfs_put_layoutdriver(const struct pnfs_layoutdriver_type *ld)
+{
+ if (ld)
+ module_put(ld->owner);
+}
+
void
unset_pnfs_layoutdriver(struct nfs_server *nfss)
{
diff --git a/fs/nfs/pnfs.h b/fs/nfs/pnfs.h
index 0212fe32e63a..11d9ed9addc0 100644
--- a/fs/nfs/pnfs.h
+++ b/fs/nfs/pnfs.h
@@ -236,6 +236,8 @@ struct pnfs_devicelist {
extern int pnfs_register_layoutdriver(struct pnfs_layoutdriver_type *);
extern void pnfs_unregister_layoutdriver(struct pnfs_layoutdriver_type *);
+extern const struct pnfs_layoutdriver_type *pnfs_find_layoutdriver(u32 id);
+extern void pnfs_put_layoutdriver(const struct pnfs_layoutdriver_type *ld);
/* nfs4proc.c */
extern size_t max_response_pages(struct nfs_server *server);
--
2.34.1
From: Nishanth Menon <[email protected]>
commit a06ed27f3bc63ab9e10007dc0118d910908eb045 upstream.
Though GIC ARE option is disabled for no GIC-v2 compatibility,
Cortex-A72 is free to implement the CPU interface as long as it
communicates with the GIC using the stream protocol. This requires
that the SoC integration mark out the PERIPHBASE[1] as reserved area
within the SoC. See longer discussion in [2] for further information.
Update the GIC register map to indicate offsets from PERIPHBASE based
on [3]. Without doing this, systems like kvm will not function with
gic-v2 emulation.
[1] https://developer.arm.com/documentation/100095/0002/system-control/aarch64-register-descriptions/configuration-base-address-register--el1
[2] https://lore.kernel.org/all/[email protected]/
[3] https://developer.arm.com/documentation/100095/0002/way1382452674438
Cc: [email protected] # 5.10+
Fixes: 2d87061e70de ("arm64: dts: ti: Add Support for J721E SoC")
Reported-by: Marc Zyngier <[email protected]>
Signed-off-by: Nishanth Menon <[email protected]>
Acked-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 5 ++++-
arch/arm64/boot/dts/ti/k3-j721e.dtsi | 1 +
2 files changed, 5 insertions(+), 1 deletion(-)
--- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -108,7 +108,10 @@
#interrupt-cells = <3>;
interrupt-controller;
reg = <0x00 0x01800000 0x00 0x10000>, /* GICD */
- <0x00 0x01900000 0x00 0x100000>; /* GICR */
+ <0x00 0x01900000 0x00 0x100000>, /* GICR */
+ <0x00 0x6f000000 0x00 0x2000>, /* GICC */
+ <0x00 0x6f010000 0x00 0x1000>, /* GICH */
+ <0x00 0x6f020000 0x00 0x2000>; /* GICV */
/* vcpumntirq: virtual CPU interface maintenance interrupt */
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
--- a/arch/arm64/boot/dts/ti/k3-j721e.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e.dtsi
@@ -136,6 +136,7 @@
<0x00 0x0e000000 0x00 0x0e000000 0x00 0x01800000>, /* PCIe Core*/
<0x00 0x10000000 0x00 0x10000000 0x00 0x10000000>, /* PCIe DAT */
<0x00 0x64800000 0x00 0x64800000 0x00 0x00800000>, /* C71 */
+ <0x00 0x6f000000 0x00 0x6f000000 0x00 0x00310000>, /* A72 PERIPHBASE */
<0x44 0x00000000 0x44 0x00000000 0x00 0x08000000>, /* PCIe2 DAT */
<0x44 0x10000000 0x44 0x10000000 0x00 0x08000000>, /* PCIe3 DAT */
<0x4d 0x80800000 0x4d 0x80800000 0x00 0x00800000>, /* C66_0 */
From: Alexander Lobakin <[email protected]>
[ Upstream commit bc97f9c6f988b31b728eb47a94ca825401dbeffe ]
{__,}napi_alloc_skb() allocates and reserves additional NET_SKB_PAD
+ NET_IP_ALIGN for any skb.
OTOH, i40e_construct_skb_zc() currently allocates and reserves
additional `xdp->data - xdp->data_hard_start`, which is
XDP_PACKET_HEADROOM for XSK frames.
There's no need for that at all as the frame is post-XDP and will
go only to the networking stack core.
Pass the size of the actual data only to __napi_alloc_skb() and
don't reserve anything. This will give enough headroom for stack
processing.
Fixes: 0a714186d3c0 ("i40e: add AF_XDP zero-copy Rx support")
Signed-off-by: Alexander Lobakin <[email protected]>
Reviewed-by: Michal Swiatkowski <[email protected]>
Acked-by: Jesper Dangaard Brouer <[email protected]>
Tested-by: Kiran Bhandare <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/i40e/i40e_xsk.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/intel/i40e/i40e_xsk.c b/drivers/net/ethernet/intel/i40e/i40e_xsk.c
index 86c79f71c685..d444e38360c1 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_xsk.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_xsk.c
@@ -252,13 +252,11 @@ static struct sk_buff *i40e_construct_skb_zc(struct i40e_ring *rx_ring,
struct sk_buff *skb;
/* allocate a skb to store the frags */
- skb = __napi_alloc_skb(&rx_ring->q_vector->napi,
- xdp->data_end - xdp->data_hard_start,
+ skb = __napi_alloc_skb(&rx_ring->q_vector->napi, datasize,
GFP_ATOMIC | __GFP_NOWARN);
if (unlikely(!skb))
return NULL;
- skb_reserve(skb, xdp->data - xdp->data_hard_start);
memcpy(__skb_put(skb, datasize), xdp->data, datasize);
if (metasize)
skb_metadata_set(skb, metasize);
--
2.34.1
From: Linus Torvalds <[email protected]>
[ Upstream commit d888c83fcec75194a8a48ccd283953bdba7b2550 ]
Jason Donenfeld reports that my commit 1c24a186398f ("fs: fd tables have
to be multiples of BITS_PER_LONG") doesn't work, and the reason is an
embarrassing brown-paper-bag bug.
Yes, we want to align the number of fds to BITS_PER_LONG, and yes, the
reason they might not be aligned is because the incoming 'max_fd'
argument might not be aligned.
But aligining the argument - while simple - will cause a "infinitely
big" maxfd (eg NR_OPEN_MAX) to just overflow to zero. Which most
definitely isn't what we want either.
The obvious fix was always just to do the alignment last, but I had
moved it earlier just to make the patch smaller and the code look
simpler. Duh. It certainly made _me_ look simple.
Fixes: 1c24a186398f ("fs: fd tables have to be multiples of BITS_PER_LONG")
Reported-and-tested-by: Jason A. Donenfeld <[email protected]>
Cc: Fedor Pchelkin <[email protected]>
Cc: Alexey Khoroshilov <[email protected]>
Cc: Christian Brauner <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/file.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/fs/file.c b/fs/file.c
index a47a1edb9404..8431dfde036c 100644
--- a/fs/file.c
+++ b/fs/file.c
@@ -301,10 +301,9 @@ static unsigned int sane_fdtable_size(struct fdtable *fdt, unsigned int max_fds)
unsigned int count;
count = count_open_files(fdt);
- max_fds = ALIGN(max_fds, BITS_PER_LONG);
if (max_fds < NR_OPEN_DEFAULT)
max_fds = NR_OPEN_DEFAULT;
- return min(count, max_fds);
+ return ALIGN(min(count, max_fds), BITS_PER_LONG);
}
/*
--
2.34.1
From: Eric Dumazet <[email protected]>
[ Upstream commit 5e0ccd4a3b01c5a71732a13186ca110a138516ea ]
Commit ec9c82e03a74 ("rseq: uapi: Declare rseq_cs field as union,
update includes") added regressions for our servers.
Using copy_from_user() and clear_user() for 64bit values
is suboptimal.
We can use faster put_user() and get_user() on 64bit arches.
Signed-off-by: Eric Dumazet <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Mathieu Desnoyers <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/rseq.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/kernel/rseq.c b/kernel/rseq.c
index 0077713bf240..1b4547e0d841 100644
--- a/kernel/rseq.c
+++ b/kernel/rseq.c
@@ -120,8 +120,13 @@ static int rseq_get_rseq_cs(struct task_struct *t, struct rseq_cs *rseq_cs)
u32 sig;
int ret;
+#ifdef CONFIG_64BIT
+ if (get_user(ptr, &t->rseq->rseq_cs.ptr64))
+ return -EFAULT;
+#else
if (copy_from_user(&ptr, &t->rseq->rseq_cs.ptr64, sizeof(ptr)))
return -EFAULT;
+#endif
if (!ptr) {
memset(rseq_cs, 0, sizeof(*rseq_cs));
return 0;
@@ -204,9 +209,13 @@ static int clear_rseq_cs(struct task_struct *t)
*
* Set rseq_cs to NULL.
*/
+#ifdef CONFIG_64BIT
+ return put_user(0UL, &t->rseq->rseq_cs.ptr64);
+#else
if (clear_user(&t->rseq->rseq_cs.ptr64, sizeof(t->rseq->rseq_cs.ptr64)))
return -EFAULT;
return 0;
+#endif
}
/*
--
2.34.1
From: Charles Keepax <[email protected]>
[ Upstream commit ec29170c724ca30305fc3a19ba2ee73ecac65509 ]
The Madera CODECs use regmap_irq functions but nothing ensures that
regmap_irq is built into the kernel. Add dependencies on the ASoC
symbols for the relevant MFD component. There is no point in building
the ASoC driver if the MFD doesn't support it and the MFD part contains
the necessary dependencies to ensure everything is built into the
kernel.
Reported-by: Mark Brown <[email protected]>
Signed-off-by: Charles Keepax <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/codecs/Kconfig | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
index 34c6dd04b85a..52c89a6f54e9 100644
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -659,6 +659,7 @@ config SND_SOC_CS4349
config SND_SOC_CS47L15
tristate
+ depends on MFD_CS47L15
config SND_SOC_CS47L24
tristate
@@ -666,15 +667,19 @@ config SND_SOC_CS47L24
config SND_SOC_CS47L35
tristate
+ depends on MFD_CS47L35
config SND_SOC_CS47L85
tristate
+ depends on MFD_CS47L85
config SND_SOC_CS47L90
tristate
+ depends on MFD_CS47L90
config SND_SOC_CS47L92
tristate
+ depends on MFD_CS47L92
# Cirrus Logic Quad-Channel ADC
config SND_SOC_CS53L30
--
2.34.1
From: Manish Rangankar <[email protected]>
commit a7e05f7a1bcbe4ee055479242de46c5c16ab03b1 upstream.
During SNS Register FC-4 Features (RFF_ID) the initiator driver was sending
incorrect type field for NVMe supported device. Use correct feature type
field.
Link: https://lore.kernel.org/r/[email protected]
Fixes: e374f9f59281 ("scsi: qla2xxx: Migrate switch registration commands away from mailbox interface")
Cc: [email protected]
Reviewed-by: Himanshu Madhani <[email protected]>
Signed-off-by: Manish Rangankar <[email protected]>
Signed-off-by: Nilesh Javali <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/qla2xxx/qla_gs.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
--- a/drivers/scsi/qla2xxx/qla_gs.c
+++ b/drivers/scsi/qla2xxx/qla_gs.c
@@ -676,8 +676,7 @@ qla2x00_rff_id(scsi_qla_host_t *vha, u8
return (QLA_SUCCESS);
}
- return qla_async_rffid(vha, &vha->d_id, qlt_rff_id(vha),
- FC4_TYPE_FCP_SCSI);
+ return qla_async_rffid(vha, &vha->d_id, qlt_rff_id(vha), type);
}
static int qla_async_rffid(scsi_qla_host_t *vha, port_id_t *d_id,
@@ -727,7 +726,7 @@ static int qla_async_rffid(scsi_qla_host
/* Prepare CT arguments -- port_id, FC-4 feature, FC-4 type */
ct_req->req.rff_id.port_id = port_id_to_be_id(*d_id);
ct_req->req.rff_id.fc4_feature = fc4feature;
- ct_req->req.rff_id.fc4_type = fc4type; /* SCSI - FCP */
+ ct_req->req.rff_id.fc4_type = fc4type; /* SCSI-FCP or FC-NVMe */
sp->u.iocb_cmd.u.ctarg.req_size = RFF_ID_REQ_SIZE;
sp->u.iocb_cmd.u.ctarg.rsp_size = RFF_ID_RSP_SIZE;
From: Saurav Kashyap <[email protected]>
commit a60447e7d451df42c7bde43af53b34f10f34f469 upstream.
[ 12.323788] BUG: using smp_processor_id() in preemptible [00000000] code: systemd-udevd/1020
[ 12.332297] caller is qla2xxx_create_qpair+0x32a/0x5d0 [qla2xxx]
[ 12.338417] CPU: 7 PID: 1020 Comm: systemd-udevd Tainted: G I --------- --- 5.14.0-29.el9.x86_64 #1
[ 12.348827] Hardware name: Dell Inc. PowerEdge R610/0F0XJ6, BIOS 6.6.0 05/22/2018
[ 12.356356] Call Trace:
[ 12.358821] dump_stack_lvl+0x34/0x44
[ 12.362514] check_preemption_disabled+0xd9/0xe0
[ 12.367164] qla2xxx_create_qpair+0x32a/0x5d0 [qla2xxx]
[ 12.372481] qla2x00_probe_one+0xa3a/0x1b80 [qla2xxx]
[ 12.377617] ? _raw_spin_lock_irqsave+0x19/0x40
[ 12.384284] local_pci_probe+0x42/0x80
[ 12.390162] ? pci_match_device+0xd7/0x110
[ 12.396366] pci_device_probe+0xfd/0x1b0
[ 12.402372] really_probe+0x1e7/0x3e0
[ 12.408114] __driver_probe_device+0xfe/0x180
[ 12.414544] driver_probe_device+0x1e/0x90
[ 12.420685] __driver_attach+0xc0/0x1c0
[ 12.426536] ? __device_attach_driver+0xe0/0xe0
[ 12.433061] ? __device_attach_driver+0xe0/0xe0
[ 12.439538] bus_for_each_dev+0x78/0xc0
[ 12.445294] bus_add_driver+0x12b/0x1e0
[ 12.451021] driver_register+0x8f/0xe0
[ 12.456631] ? 0xffffffffc07bc000
[ 12.461773] qla2x00_module_init+0x1be/0x229 [qla2xxx]
[ 12.468776] do_one_initcall+0x44/0x200
[ 12.474401] ? load_module+0xad3/0xba0
[ 12.479908] ? kmem_cache_alloc_trace+0x45/0x410
[ 12.486268] do_init_module+0x5c/0x280
[ 12.491730] __do_sys_init_module+0x12e/0x1b0
[ 12.497785] do_syscall_64+0x3b/0x90
[ 12.503029] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 12.509764] RIP: 0033:0x7f554f73ab2e
Link: https://lore.kernel.org/r/[email protected]
Cc: [email protected]
Reviewed-by: Himanshu Madhani <[email protected]>
Signed-off-by: Saurav Kashyap <[email protected]>
Signed-off-by: Nilesh Javali <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/qla2xxx/qla_init.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -9143,7 +9143,7 @@ struct qla_qpair *qla2xxx_create_qpair(s
qpair->rsp->req = qpair->req;
qpair->rsp->qpair = qpair;
/* init qpair to this cpu. Will adjust at run time. */
- qla_cpu_update(qpair, smp_processor_id());
+ qla_cpu_update(qpair, raw_smp_processor_id());
if (IS_T10_PI_CAPABLE(ha) && ql2xenabledif) {
if (ha->fw_attributes & BIT_4)
From: Corentin Labbe <[email protected]>
[ Upstream commit 973d74e93820d99d8ea203882631c76edab699c9 ]
When loading rockchip crypto module, testmgr complains that ivsize of ecb-des3-ede-rk
is not the same than generic implementation.
In fact ECB does not use an IV.
Fixes: ce0183cb6464b ("crypto: rockchip - switch to skcipher API")
Signed-off-by: Corentin Labbe <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/crypto/rockchip/rk3288_crypto_skcipher.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/crypto/rockchip/rk3288_crypto_skcipher.c b/drivers/crypto/rockchip/rk3288_crypto_skcipher.c
index 1cece1a7d3f0..5bbf0d2722e1 100644
--- a/drivers/crypto/rockchip/rk3288_crypto_skcipher.c
+++ b/drivers/crypto/rockchip/rk3288_crypto_skcipher.c
@@ -506,7 +506,6 @@ struct rk_crypto_tmp rk_ecb_des3_ede_alg = {
.exit = rk_ablk_exit_tfm,
.min_keysize = DES3_EDE_KEY_SIZE,
.max_keysize = DES3_EDE_KEY_SIZE,
- .ivsize = DES_BLOCK_SIZE,
.setkey = rk_tdes_setkey,
.encrypt = rk_des3_ede_ecb_encrypt,
.decrypt = rk_des3_ede_ecb_decrypt,
--
2.34.1
From: Jiasheng Jiang <[email protected]>
commit ccb4214f7f2a8b75acf493f31128e464ee1a3536 upstream.
It should be better to reverse the check on codec_dai
and returned early in order to be easier to understand.
Fixes: de2c6f98817f ("ASoC: soc-compress: prevent the potentially use of null pointer")
Reported-by: kernel test robot <[email protected]>
Reported-by: Dan Carpenter <[email protected]>
Signed-off-by: Jiasheng Jiang <[email protected]>
Reviewed-by: Charles Keepax <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/soc/soc-compress.c | 19 +++++++++++--------
1 file changed, 11 insertions(+), 8 deletions(-)
--- a/sound/soc/soc-compress.c
+++ b/sound/soc/soc-compress.c
@@ -766,16 +766,19 @@ int snd_soc_new_compress(struct snd_soc_
return -EINVAL;
}
- /* check client and interface hw capabilities */
- if (codec_dai) {
- if (snd_soc_dai_stream_valid(codec_dai, SNDRV_PCM_STREAM_PLAYBACK) &&
- snd_soc_dai_stream_valid(cpu_dai, SNDRV_PCM_STREAM_PLAYBACK))
- playback = 1;
- if (snd_soc_dai_stream_valid(codec_dai, SNDRV_PCM_STREAM_CAPTURE) &&
- snd_soc_dai_stream_valid(cpu_dai, SNDRV_PCM_STREAM_CAPTURE))
- capture = 1;
+ if (!codec_dai) {
+ dev_err(rtd->card->dev, "Missing codec\n");
+ return -EINVAL;
}
+ /* check client and interface hw capabilities */
+ if (snd_soc_dai_stream_valid(codec_dai, SNDRV_PCM_STREAM_PLAYBACK) &&
+ snd_soc_dai_stream_valid(cpu_dai, SNDRV_PCM_STREAM_PLAYBACK))
+ playback = 1;
+ if (snd_soc_dai_stream_valid(codec_dai, SNDRV_PCM_STREAM_CAPTURE) &&
+ snd_soc_dai_stream_valid(cpu_dai, SNDRV_PCM_STREAM_CAPTURE))
+ capture = 1;
+
/*
* Compress devices are unidirectional so only one of the directions
* should be set, check for that (xor)
From: Nishanth Menon <[email protected]>
commit 8cae268b70f387ff9e697ccd62fb2384079124e7 upstream.
Though GIC ARE option is disabled for no GIC-v2 compatibility,
Cortex-A53 is free to implement the CPU interface as long as it
communicates with the GIC using the stream protocol. This requires
that the SoC integration mark out the PERIPHBASE[1] as reserved area
within the SoC. See longer discussion in [2] for further information.
Update the GIC register map to indicate offsets from PERIPHBASE based
on [3]. Without doing this, systems like kvm will not function with
gic-v2 emulation.
[1] https://developer.arm.com/documentation/ddi0500/e/system-control/aarch64-register-descriptions/configuration-base-address-register--el1
[2] https://lore.kernel.org/all/[email protected]/
[3] https://developer.arm.com/documentation/ddi0500/e/generic-interrupt-controller-cpu-interface/gic-programmers-model/memory-map
Cc: [email protected] # 5.10+
Fixes: ea47eed33a3f ("arm64: dts: ti: Add Support for AM654 SoC")
Reported-by: Marc Zyngier <[email protected]>
Signed-off-by: Nishanth Menon <[email protected]>
Acked-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 5 ++++-
arch/arm64/boot/dts/ti/k3-am65.dtsi | 1 +
2 files changed, 5 insertions(+), 1 deletion(-)
--- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -35,7 +35,10 @@
#interrupt-cells = <3>;
interrupt-controller;
reg = <0x00 0x01800000 0x00 0x10000>, /* GICD */
- <0x00 0x01880000 0x00 0x90000>; /* GICR */
+ <0x00 0x01880000 0x00 0x90000>, /* GICR */
+ <0x00 0x6f000000 0x00 0x2000>, /* GICC */
+ <0x00 0x6f010000 0x00 0x1000>, /* GICH */
+ <0x00 0x6f020000 0x00 0x2000>; /* GICV */
/*
* vcpumntirq:
* virtual CPU interface maintenance interrupt
--- a/arch/arm64/boot/dts/ti/k3-am65.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65.dtsi
@@ -84,6 +84,7 @@
<0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>,
<0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>,
<0x00 0x50000000 0x00 0x50000000 0x00 0x8000000>,
+ <0x00 0x6f000000 0x00 0x6f000000 0x00 0x00310000>, /* A53 PERIPHBASE */
<0x00 0x70000000 0x00 0x70000000 0x00 0x200000>,
<0x05 0x00000000 0x05 0x00000000 0x01 0x0000000>,
<0x07 0x00000000 0x07 0x00000000 0x01 0x0000000>;
From: Jiasheng Jiang <[email protected]>
[ Upstream commit e25a89f743b18c029bfbe5e1663ae0c7190912b0 ]
The return value of devm_kzalloc() needs to be checked.
To avoid use of null pointer in case of thefailure of alloc.
Fixes: 46233e91fa24 ("media: mtk-vcodec: move firmware implementations into their own files")
Signed-off-by: Jiasheng Jiang <[email protected]>
Reviewed-by: Tzung-Bi Shih <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/platform/mtk-vcodec/mtk_vcodec_fw_vpu.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_fw_vpu.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_fw_vpu.c
index cd27f637dbe7..cfc7ebed8fb7 100644
--- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_fw_vpu.c
+++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_fw_vpu.c
@@ -102,6 +102,8 @@ struct mtk_vcodec_fw *mtk_vcodec_fw_vpu_init(struct mtk_vcodec_dev *dev,
vpu_wdt_reg_handler(fw_pdev, mtk_vcodec_vpu_reset_handler, dev, rst_id);
fw = devm_kzalloc(&dev->plat_dev->dev, sizeof(*fw), GFP_KERNEL);
+ if (!fw)
+ return ERR_PTR(-ENOMEM);
fw->type = VPU;
fw->ops = &mtk_vcodec_vpu_msg;
fw->pdev = fw_pdev;
--
2.34.1
From: Pekka Pessi <[email protected]>
commit 60de2d2dc284e0dd1c2c897d08625bde24ef3454 upstream.
The txdone can re-fill the mailbox. Keep polling the mailbox during the
flush until all the messages have been delivered.
This fixes an issue with the Tegra Combined UART (TCU) where output can
get truncated under high traffic load.
Signed-off-by: Pekka Pessi <[email protected]>
Tested-by: Jon Hunter <[email protected]>
Fixes: 91b1b1c3da8a ("mailbox: tegra-hsp: Add support for shared mailboxes")
Cc: [email protected]
Signed-off-by: Thierry Reding <[email protected]>
Reviewed-by: Jon Hunter <[email protected]>
Signed-off-by: Jassi Brar <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mailbox/tegra-hsp.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/drivers/mailbox/tegra-hsp.c
+++ b/drivers/mailbox/tegra-hsp.c
@@ -410,6 +410,11 @@ static int tegra_hsp_mailbox_flush(struc
value = tegra_hsp_channel_readl(ch, HSP_SM_SHRD_MBOX);
if ((value & HSP_SM_SHRD_MBOX_FULL) == 0) {
mbox_chan_txdone(chan, 0);
+
+ /* Wait until channel is empty */
+ if (chan->active_req != NULL)
+ continue;
+
return 0;
}
From: Miaoqian Lin <[email protected]>
[ Upstream commit 9747a78d5f758a5284751a10aee13c30d02bd5f1 ]
The device_node pointer is returned by of_parse_phandle() with refcount
incremented. We should use of_node_put() on it when done.
This function only calls of_node_put() in the regular path.
And it will cause refcount leak in error path.
Fixes: 727fec790ead ("ath10k: Setup the msa resources before qmi init")
Signed-off-by: Miaoqian Lin <[email protected]>
Reviewed-by: Jeff Johnson <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/ath10k/snoc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath10k/snoc.c b/drivers/net/wireless/ath/ath10k/snoc.c
index daae470ecf5a..e5a296039f71 100644
--- a/drivers/net/wireless/ath/ath10k/snoc.c
+++ b/drivers/net/wireless/ath/ath10k/snoc.c
@@ -1477,11 +1477,11 @@ static int ath10k_setup_msa_resources(struct ath10k *ar, u32 msa_size)
node = of_parse_phandle(dev->of_node, "memory-region", 0);
if (node) {
ret = of_address_to_resource(node, 0, &r);
+ of_node_put(node);
if (ret) {
dev_err(dev, "failed to resolve msa fixed region\n");
return ret;
}
- of_node_put(node);
ar->msa.paddr = r.start;
ar->msa.mem_size = resource_size(&r);
--
2.34.1
From: Jann Horn <[email protected]>
commit 8126b1c73108bc691f5643df19071a59a69d0bc6 upstream.
pstore_dump() is *always* invoked in atomic context (nowadays in an RCU
read-side critical section, before that under a spinlock).
It doesn't make sense to try to use semaphores here.
This is mostly a revert of commit ea84b580b955 ("pstore: Convert buf_lock
to semaphore"), except that two parts aren't restored back exactly as they
were:
- keep the lock initialization in pstore_register
- in efi_pstore_write(), always set the "block" flag to false
- omit "is_locked", that was unnecessary since
commit 959217c84c27 ("pstore: Actually give up during locking failure")
- fix the bailout message
The actual problem that the buggy commit was trying to address may have
been that the use of preemptible() in efi_pstore_write() was wrong - it
only looks at preempt_count() and the state of IRQs, but __rcu_read_lock()
doesn't touch either of those under CONFIG_PREEMPT_RCU.
(Sidenote: CONFIG_PREEMPT_RCU means that the scheduler can preempt tasks in
RCU read-side critical sections, but you're not allowed to actively
block/reschedule.)
Lockdep probably never caught the problem because it's very rare that you
actually hit the contended case, so lockdep always just sees the
down_trylock(), not the down_interruptible(), and so it can't tell that
there's a problem.
Fixes: ea84b580b955 ("pstore: Convert buf_lock to semaphore")
Cc: [email protected]
Acked-by: Sebastian Andrzej Siewior <[email protected]>
Signed-off-by: Jann Horn <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/firmware/efi/efi-pstore.c | 2 +-
fs/pstore/platform.c | 38 ++++++++++++++++++--------------------
include/linux/pstore.h | 6 +++---
3 files changed, 22 insertions(+), 24 deletions(-)
--- a/drivers/firmware/efi/efi-pstore.c
+++ b/drivers/firmware/efi/efi-pstore.c
@@ -266,7 +266,7 @@ static int efi_pstore_write(struct pstor
efi_name[i] = name[i];
ret = efivar_entry_set_safe(efi_name, vendor, PSTORE_EFI_ATTRIBUTES,
- preemptible(), record->size, record->psi->buf);
+ false, record->size, record->psi->buf);
if (record->reason == KMSG_DUMP_OOPS && try_module_get(THIS_MODULE))
if (!schedule_work(&efivar_work))
--- a/fs/pstore/platform.c
+++ b/fs/pstore/platform.c
@@ -143,21 +143,22 @@ static void pstore_timer_kick(void)
mod_timer(&pstore_timer, jiffies + msecs_to_jiffies(pstore_update_ms));
}
-/*
- * Should pstore_dump() wait for a concurrent pstore_dump()? If
- * not, the current pstore_dump() will report a failure to dump
- * and return.
- */
-static bool pstore_cannot_wait(enum kmsg_dump_reason reason)
+static bool pstore_cannot_block_path(enum kmsg_dump_reason reason)
{
- /* In NMI path, pstore shouldn't block regardless of reason. */
+ /*
+ * In case of NMI path, pstore shouldn't be blocked
+ * regardless of reason.
+ */
if (in_nmi())
return true;
switch (reason) {
/* In panic case, other cpus are stopped by smp_send_stop(). */
case KMSG_DUMP_PANIC:
- /* Emergency restart shouldn't be blocked. */
+ /*
+ * Emergency restart shouldn't be blocked by spinning on
+ * pstore_info::buf_lock.
+ */
case KMSG_DUMP_EMERG:
return true;
default:
@@ -388,21 +389,19 @@ static void pstore_dump(struct kmsg_dump
unsigned long total = 0;
const char *why;
unsigned int part = 1;
+ unsigned long flags = 0;
int ret;
why = kmsg_dump_reason_str(reason);
- if (down_trylock(&psinfo->buf_lock)) {
- /* Failed to acquire lock: give up if we cannot wait. */
- if (pstore_cannot_wait(reason)) {
- pr_err("dump skipped in %s path: may corrupt error record\n",
- in_nmi() ? "NMI" : why);
- return;
- }
- if (down_interruptible(&psinfo->buf_lock)) {
- pr_err("could not grab semaphore?!\n");
+ if (pstore_cannot_block_path(reason)) {
+ if (!spin_trylock_irqsave(&psinfo->buf_lock, flags)) {
+ pr_err("dump skipped in %s path because of concurrent dump\n",
+ in_nmi() ? "NMI" : why);
return;
}
+ } else {
+ spin_lock_irqsave(&psinfo->buf_lock, flags);
}
oopscount++;
@@ -464,8 +463,7 @@ static void pstore_dump(struct kmsg_dump
total += record.size;
part++;
}
-
- up(&psinfo->buf_lock);
+ spin_unlock_irqrestore(&psinfo->buf_lock, flags);
}
static struct kmsg_dumper pstore_dumper = {
@@ -591,7 +589,7 @@ int pstore_register(struct pstore_info *
psi->write_user = pstore_write_user_compat;
psinfo = psi;
mutex_init(&psinfo->read_mutex);
- sema_init(&psinfo->buf_lock, 1);
+ spin_lock_init(&psinfo->buf_lock);
if (psi->flags & PSTORE_FLAGS_DMESG)
allocate_buf_for_compression();
--- a/include/linux/pstore.h
+++ b/include/linux/pstore.h
@@ -14,7 +14,7 @@
#include <linux/errno.h>
#include <linux/kmsg_dump.h>
#include <linux/mutex.h>
-#include <linux/semaphore.h>
+#include <linux/spinlock.h>
#include <linux/time.h>
#include <linux/types.h>
@@ -87,7 +87,7 @@ struct pstore_record {
* @owner: module which is responsible for this backend driver
* @name: name of the backend driver
*
- * @buf_lock: semaphore to serialize access to @buf
+ * @buf_lock: spinlock to serialize access to @buf
* @buf: preallocated crash dump buffer
* @bufsize: size of @buf available for crash dump bytes (must match
* smallest number of bytes available for writing to a
@@ -178,7 +178,7 @@ struct pstore_info {
struct module *owner;
const char *name;
- struct semaphore buf_lock;
+ spinlock_t buf_lock;
char *buf;
size_t bufsize;
From: Dan Carpenter <[email protected]>
commit 23a9dbbe0faf124fc4c139615633b9d12a3a89ef upstream.
On a 32 bit system, the "len * sizeof(*p)" operation can have an
integer overflow.
Cc: [email protected]
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Chuck Lever <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/linux/sunrpc/xdr.h | 2 ++
1 file changed, 2 insertions(+)
--- a/include/linux/sunrpc/xdr.h
+++ b/include/linux/sunrpc/xdr.h
@@ -603,6 +603,8 @@ xdr_stream_decode_uint32_array(struct xd
if (unlikely(xdr_stream_decode_u32(xdr, &len) < 0))
return -EBADMSG;
+ if (len > SIZE_MAX / sizeof(*p))
+ return -EBADMSG;
p = xdr_inline_decode(xdr, len * sizeof(*p));
if (unlikely(!p))
return -EBADMSG;
From: Chao Yu <[email protected]>
[ Upstream commit d284af43f703760e261b1601378a0c13a19d5f1f ]
In lz4_decompress_pages(), if size of decompressed data is not equal to
expected one, we should print the size rather than size of target buffer
for decompressed data, fix it.
Signed-off-by: Chao Yu <[email protected]>
Signed-off-by: Jaegeuk Kim <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/f2fs/compress.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/fs/f2fs/compress.c b/fs/f2fs/compress.c
index ec542e8c46cc..1541da5ace85 100644
--- a/fs/f2fs/compress.c
+++ b/fs/f2fs/compress.c
@@ -286,10 +286,9 @@ static int lz4_decompress_pages(struct decompress_io_ctx *dic)
}
if (ret != PAGE_SIZE << dic->log_cluster_size) {
- printk_ratelimited("%sF2FS-fs (%s): lz4 invalid rlen:%zu, "
+ printk_ratelimited("%sF2FS-fs (%s): lz4 invalid ret:%d, "
"expected:%lu\n", KERN_ERR,
- F2FS_I_SB(dic->inode)->sb->s_id,
- dic->rlen,
+ F2FS_I_SB(dic->inode)->sb->s_id, ret,
PAGE_SIZE << dic->log_cluster_size);
return -EIO;
}
--
2.34.1
From: Amir Goldstein <[email protected]>
[ Upstream commit 4d2eeafecd6c83b4444db3dc0ada201c89b1aa44 ]
The nfsd file cache table can be pretty large and its allocation
may require as many as 80 contigious pages.
Employ the same fix that was employed for similar issue that was
reported for the reply cache hash table allocation several years ago
by commit 8f97514b423a ("nfsd: more robust allocation failure handling
in nfsd_reply_cache_init").
Fixes: 65294c1f2c5e ("nfsd: add a new struct file caching facility to nfsd")
Link: https://lore.kernel.org/linux-nfs/[email protected]/
Suggested-by: Jeff Layton <[email protected]>
Signed-off-by: Amir Goldstein <[email protected]>
Reviewed-by: Jeff Layton <[email protected]>
Signed-off-by: Chuck Lever <[email protected]>
Tested-by: Amir Goldstein <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/nfsd/filecache.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/fs/nfsd/filecache.c b/fs/nfsd/filecache.c
index e5aad1c10ea3..acd0898e3866 100644
--- a/fs/nfsd/filecache.c
+++ b/fs/nfsd/filecache.c
@@ -641,7 +641,7 @@ nfsd_file_cache_init(void)
if (!nfsd_filecache_wq)
goto out;
- nfsd_file_hashtbl = kcalloc(NFSD_FILE_HASH_SIZE,
+ nfsd_file_hashtbl = kvcalloc(NFSD_FILE_HASH_SIZE,
sizeof(*nfsd_file_hashtbl), GFP_KERNEL);
if (!nfsd_file_hashtbl) {
pr_err("nfsd: unable to allocate nfsd_file_hashtbl\n");
@@ -708,7 +708,7 @@ nfsd_file_cache_init(void)
nfsd_file_slab = NULL;
kmem_cache_destroy(nfsd_file_mark_slab);
nfsd_file_mark_slab = NULL;
- kfree(nfsd_file_hashtbl);
+ kvfree(nfsd_file_hashtbl);
nfsd_file_hashtbl = NULL;
destroy_workqueue(nfsd_filecache_wq);
nfsd_filecache_wq = NULL;
@@ -854,7 +854,7 @@ nfsd_file_cache_shutdown(void)
fsnotify_wait_marks_destroyed();
kmem_cache_destroy(nfsd_file_mark_slab);
nfsd_file_mark_slab = NULL;
- kfree(nfsd_file_hashtbl);
+ kvfree(nfsd_file_hashtbl);
nfsd_file_hashtbl = NULL;
destroy_workqueue(nfsd_filecache_wq);
nfsd_filecache_wq = NULL;
--
2.34.1
From: Biju Das <[email protected]>
[ Upstream commit 1a4e53d2fc4f68aa654ad96d13ad042e1a8e8a7d ]
max_seg_size is unsigned int and it can have a value up to 2^32
(for eg:-RZ_DMAC driver sets dma_set_max_seg_size as U32_MAX)
When this value is used in min_t() as an integer type, it becomes
-1 and the value of sgs becomes 0.
Fix this issue by replacing the 'int' data type with 'unsigned int'
in min_t().
Signed-off-by: Biju Das <[email protected]>
Reviewed-by: Lad Prabhakar <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/spi/spi.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 8c261eac2cee..2396565fc91b 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -881,10 +881,10 @@ int spi_map_buf(struct spi_controller *ctlr, struct device *dev,
int i, ret;
if (vmalloced_buf || kmap_buf) {
- desc_len = min_t(int, max_seg_size, PAGE_SIZE);
+ desc_len = min_t(unsigned int, max_seg_size, PAGE_SIZE);
sgs = DIV_ROUND_UP(len + offset_in_page(buf), desc_len);
} else if (virt_addr_valid(buf)) {
- desc_len = min_t(int, max_seg_size, ctlr->max_dma_len);
+ desc_len = min_t(unsigned int, max_seg_size, ctlr->max_dma_len);
sgs = DIV_ROUND_UP(len, desc_len);
} else {
return -EINVAL;
--
2.34.1
From: Bikash Hazarika <[email protected]>
commit 1cfbbacbee2d6ea3816386a483e3c7a96e5bd657 upstream.
Corrected transmission speed mask values for FC.
Supported Speed: 16 32 20 Gb/s ===> Should be 64 instead of 20
Supported Speed: 16G 32G 48G ===> Should be 64G instead of 48G
Link: https://lore.kernel.org/r/[email protected]
Cc: [email protected]
Reviewed-by: Himanshu Madhani <[email protected]>
Signed-off-by: Bikash Hazarika <[email protected]>
Signed-off-by: Nilesh Javali <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/qla2xxx/qla_def.h | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -2796,7 +2796,11 @@ struct ct_fdmi2_hba_attributes {
#define FDMI_PORT_SPEED_8GB 0x10
#define FDMI_PORT_SPEED_16GB 0x20
#define FDMI_PORT_SPEED_32GB 0x40
-#define FDMI_PORT_SPEED_64GB 0x80
+#define FDMI_PORT_SPEED_20GB 0x80
+#define FDMI_PORT_SPEED_40GB 0x100
+#define FDMI_PORT_SPEED_128GB 0x200
+#define FDMI_PORT_SPEED_64GB 0x400
+#define FDMI_PORT_SPEED_256GB 0x800
#define FDMI_PORT_SPEED_UNKNOWN 0x8000
#define FC_CLASS_2 0x04
From: Bagas Sanjaya <[email protected]>
commit 587d39b260c4d090166314d64be70b1f6a26b0b5 upstream.
There is also stable release candidate tree. Mention it, however with a
warning that the tree is for testing purposes.
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Sasha Levin <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Bagas Sanjaya <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
Documentation/process/stable-kernel-rules.rst | 9 +++++++++
1 file changed, 9 insertions(+)
--- a/Documentation/process/stable-kernel-rules.rst
+++ b/Documentation/process/stable-kernel-rules.rst
@@ -170,6 +170,15 @@ Trees
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git
+ - The release candidate of all stable kernel versions can be found at:
+
+ https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git/
+
+ .. warning::
+ The -stable-rc tree is a snapshot in time of the stable-queue tree and
+ will change frequently, hence will be rebased often. It should only be
+ used for testing purposes (e.g. to be consumed by CI systems).
+
Review committee
----------------
From: Randy Dunlap <[email protected]>
[ Upstream commit ab818c7aa7544bf8d2dd4bdf68878b17a02eb332 ]
__setup() handlers should return 1 to obsolete_checksetup() in
init/main.c to indicate that the boot option has been handled.
A return of 0 causes the boot option/value to be listed as an Unknown
kernel parameter and added to init's (limited) environment strings.
So return 1 from kgdboc_option_setup().
Unknown kernel command line parameters "BOOT_IMAGE=/boot/bzImage-517rc7
kgdboc=kbd kgdbts=", will be passed to user space.
Run /sbin/init as init process
with arguments:
/sbin/init
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/boot/bzImage-517rc7
kgdboc=kbd
kgdbts=
Link: lore.kernel.org/r/[email protected]
Fixes: 1bd54d851f50 ("kgdboc: Passing ekgdboc to command line causes panic")
Fixes: f2d937f3bf00 ("consoles: polling support, kgdboc")
Cc: He Zhe <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Jiri Slaby <[email protected]>
Cc: [email protected]
Cc: Jason Wessel <[email protected]>
Cc: Daniel Thompson <[email protected]>
Cc: Douglas Anderson <[email protected]>
Cc: [email protected]
Reported-by: Igor Zhbanov <[email protected]>
Reviewed-by: Douglas Anderson <[email protected]>
Signed-off-by: Randy Dunlap <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/tty/serial/kgdboc.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/tty/serial/kgdboc.c b/drivers/tty/serial/kgdboc.c
index 49d0c7f2b29b..79b7db8580e0 100644
--- a/drivers/tty/serial/kgdboc.c
+++ b/drivers/tty/serial/kgdboc.c
@@ -403,16 +403,16 @@ static int kgdboc_option_setup(char *opt)
{
if (!opt) {
pr_err("config string not provided\n");
- return -EINVAL;
+ return 1;
}
if (strlen(opt) >= MAX_CONFIG_LEN) {
pr_err("config string too long\n");
- return -ENOSPC;
+ return 1;
}
strcpy(config, opt);
- return 0;
+ return 1;
}
__setup("kgdboc=", kgdboc_option_setup);
--
2.34.1
From: Randy Dunlap <[email protected]>
[ Upstream commit 96c9e802c64014a7716865332d732cc9c7f24593 ]
__setup() handlers should return 1 to indicate that the boot option
has been handled. A return of 0 causes the boot option/value to be
listed as an Unknown kernel parameter and added to init's (limited)
environment strings. So return 1 from kgdbts_option_setup().
Unknown kernel command line parameters "BOOT_IMAGE=/boot/bzImage-517rc7
kgdboc=kbd kgdbts=", will be passed to user space.
Run /sbin/init as init process
with arguments:
/sbin/init
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/boot/bzImage-517rc7
kgdboc=kbd
kgdbts=
Link: lore.kernel.org/r/[email protected]
Fixes: e8d31c204e36 ("kgdb: add kgdb internal test suite")
Cc: [email protected]
Cc: Jason Wessel <[email protected]>
Cc: Daniel Thompson <[email protected]>
Cc: Douglas Anderson <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Reported-by: Igor Zhbanov <[email protected]>
Reviewed-by: Douglas Anderson <[email protected]>
Signed-off-by: Randy Dunlap <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/misc/kgdbts.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/misc/kgdbts.c b/drivers/misc/kgdbts.c
index 49489153cd16..3e4d89471938 100644
--- a/drivers/misc/kgdbts.c
+++ b/drivers/misc/kgdbts.c
@@ -1060,10 +1060,10 @@ static int kgdbts_option_setup(char *opt)
{
if (strlen(opt) >= MAX_CONFIG_LEN) {
printk(KERN_ERR "kgdbts: config string too long\n");
- return -ENOSPC;
+ return 1;
}
strcpy(config, opt);
- return 0;
+ return 1;
}
__setup("kgdbts=", kgdbts_option_setup);
--
2.34.1
From: Quinn Tran <[email protected]>
commit 725d3a0d31a51c0debf970011e05f585e805165b upstream.
Fix stuck sessions in get port database. When a thread is in the process of
re-establishing a session, a flag is set to prevent multiple threads /
triggers from doing the same task. This flag was left on, where any attempt
to relogin was locked out. Clear this flag, if the attempt has failed.
Link: https://lore.kernel.org/r/[email protected]
Cc: [email protected]
Reviewed-by: Himanshu Madhani <[email protected]>
Signed-off-by: Quinn Tran <[email protected]>
Signed-off-by: Nilesh Javali <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/qla2xxx/qla_init.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -1316,9 +1316,9 @@ int qla24xx_async_gpdb(struct scsi_qla_h
if (!vha->flags.online || (fcport->flags & FCF_ASYNC_SENT) ||
fcport->loop_id == FC_NO_LOOP_ID) {
ql_log(ql_log_warn, vha, 0xffff,
- "%s: %8phC - not sending command.\n",
- __func__, fcport->port_name);
- return rval;
+ "%s: %8phC online %d flags %x - not sending command.\n",
+ __func__, fcport->port_name, vha->flags.online, fcport->flags);
+ goto done;
}
sp = qla2x00_get_sp(vha, fcport, GFP_KERNEL);
From: Michael Ellerman <[email protected]>
[ Upstream commit 2863dd2db23e0407f6c50b8ba5c0e55abef894f1 ]
When CONFIG_GENERIC_CPU=y (true for all our defconfigs) we pass
-mcpu=powerpc64 to the compiler, even when we're building a 32-bit
kernel.
This happens because we have an ifdef CONFIG_PPC_BOOK3S_64/else block in
the Makefile that was written before 32-bit supported GENERIC_CPU. Prior
to that the else block only applied to 64-bit Book3E.
The GCC man page says -mcpu=powerpc64 "[specifies] a pure ... 64-bit big
endian PowerPC ... architecture machine [type], with an appropriate,
generic processor model assumed for scheduling purposes."
It's unclear how that interacts with -m32, which we are also passing,
although obviously -m32 is taking precedence in some sense, as the
32-bit kernel only contains 32-bit instructions.
This was noticed by inspection, not via any bug reports, but it does
affect code generation. Comparing before/after code generation, there
are some changes to instruction scheduling, and the after case (with
-mcpu=powerpc64 removed) the compiler seems more keen to use r8.
Fix it by making the else case only apply to Book3E 64, which excludes
32-bit.
Fixes: 0e00a8c9fd92 ("powerpc: Allow CPU selection also on PPC32")
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index 5c8c06215dd4..7a96cdefbd4e 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -172,7 +172,7 @@ else
CFLAGS-$(CONFIG_GENERIC_CPU) += $(call cc-option,-mtune=power7,$(call cc-option,-mtune=power5))
CFLAGS-$(CONFIG_GENERIC_CPU) += $(call cc-option,-mcpu=power5,-mcpu=power4)
endif
-else
+else ifdef CONFIG_PPC_BOOK3E_64
CFLAGS-$(CONFIG_GENERIC_CPU) += -mcpu=powerpc64
endif
--
2.34.1
From: Uwe Kleine-König <[email protected]>
[ Upstream commit 5b495ac8fe03b9e0d2e775f9064c3e2a340ff440 ]
vfio_platform_remove_common() cannot return non-NULL in
vfio_amba_remove() as the latter is only called if vfio_amba_probe()
returned success.
Diagnosed-by: Arnd Bergmann <[email protected]>
Acked-by: Eric Auger <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Uwe Kleine-König <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/vfio/platform/vfio_amba.c | 14 +++++---------
1 file changed, 5 insertions(+), 9 deletions(-)
diff --git a/drivers/vfio/platform/vfio_amba.c b/drivers/vfio/platform/vfio_amba.c
index 9636a2afaecd..7b3ebf1558e1 100644
--- a/drivers/vfio/platform/vfio_amba.c
+++ b/drivers/vfio/platform/vfio_amba.c
@@ -73,16 +73,12 @@ static int vfio_amba_probe(struct amba_device *adev, const struct amba_id *id)
static int vfio_amba_remove(struct amba_device *adev)
{
- struct vfio_platform_device *vdev;
-
- vdev = vfio_platform_remove_common(&adev->dev);
- if (vdev) {
- kfree(vdev->name);
- kfree(vdev);
- return 0;
- }
+ struct vfio_platform_device *vdev =
+ vfio_platform_remove_common(&adev->dev);
- return -EINVAL;
+ kfree(vdev->name);
+ kfree(vdev);
+ return 0;
}
static const struct amba_id pl330_ids[] = {
--
2.34.1
From: Mathieu Desnoyers <[email protected]>
[ Upstream commit bfdf4e6208051ed7165b2e92035b4bf11f43eb63 ]
The rseq rseq_cs.ptr.{ptr32,padding} uapi endianness handling is
entirely wrong on 32-bit little endian: a preprocessor logic mistake
wrongly uses the big endian field layout on 32-bit little endian
architectures.
Fortunately, those ptr32 accessors were never used within the kernel,
and only meant as a convenience for user-space.
Remove those and replace the whole rseq_cs union by a __u64 type, as
this is the only thing really needed to express the ABI. Document how
32-bit architectures are meant to interact with this field.
Fixes: ec9c82e03a74 ("rseq: uapi: Declare rseq_cs field as union, update includes")
Signed-off-by: Mathieu Desnoyers <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
include/uapi/linux/rseq.h | 20 ++++----------------
kernel/rseq.c | 8 ++++----
2 files changed, 8 insertions(+), 20 deletions(-)
diff --git a/include/uapi/linux/rseq.h b/include/uapi/linux/rseq.h
index 9a402fdb60e9..77ee207623a9 100644
--- a/include/uapi/linux/rseq.h
+++ b/include/uapi/linux/rseq.h
@@ -105,23 +105,11 @@ struct rseq {
* Read and set by the kernel. Set by user-space with single-copy
* atomicity semantics. This field should only be updated by the
* thread which registered this data structure. Aligned on 64-bit.
+ *
+ * 32-bit architectures should update the low order bits of the
+ * rseq_cs field, leaving the high order bits initialized to 0.
*/
- union {
- __u64 ptr64;
-#ifdef __LP64__
- __u64 ptr;
-#else
- struct {
-#if (defined(__BYTE_ORDER) && (__BYTE_ORDER == __BIG_ENDIAN)) || defined(__BIG_ENDIAN)
- __u32 padding; /* Initialized to zero. */
- __u32 ptr32;
-#else /* LITTLE */
- __u32 ptr32;
- __u32 padding; /* Initialized to zero. */
-#endif /* ENDIAN */
- } ptr;
-#endif
- } rseq_cs;
+ __u64 rseq_cs;
/*
* Restartable sequences flags field.
diff --git a/kernel/rseq.c b/kernel/rseq.c
index 1b4547e0d841..6ca29dddceab 100644
--- a/kernel/rseq.c
+++ b/kernel/rseq.c
@@ -121,10 +121,10 @@ static int rseq_get_rseq_cs(struct task_struct *t, struct rseq_cs *rseq_cs)
int ret;
#ifdef CONFIG_64BIT
- if (get_user(ptr, &t->rseq->rseq_cs.ptr64))
+ if (get_user(ptr, &t->rseq->rseq_cs))
return -EFAULT;
#else
- if (copy_from_user(&ptr, &t->rseq->rseq_cs.ptr64, sizeof(ptr)))
+ if (copy_from_user(&ptr, &t->rseq->rseq_cs, sizeof(ptr)))
return -EFAULT;
#endif
if (!ptr) {
@@ -210,9 +210,9 @@ static int clear_rseq_cs(struct task_struct *t)
* Set rseq_cs to NULL.
*/
#ifdef CONFIG_64BIT
- return put_user(0UL, &t->rseq->rseq_cs.ptr64);
+ return put_user(0UL, &t->rseq->rseq_cs);
#else
- if (clear_user(&t->rseq->rseq_cs.ptr64, sizeof(t->rseq->rseq_cs.ptr64)))
+ if (clear_user(&t->rseq->rseq_cs, sizeof(t->rseq->rseq_cs)))
return -EFAULT;
return 0;
#endif
--
2.34.1
From: Damien Le Moal <[email protected]>
[ Upstream commit bb225b12dbcc82d53d637d10b8d70b64494f8c16 ]
The fields of the set_ctrl_cfg_req structure have the __le32 type, so use
cpu_to_le32() to assign them. This removes the sparse warnings:
warning: incorrect type in assignment (different base types)
expected restricted __le32
got unsigned int
Link: https://lore.kernel.org/r/[email protected]
Fixes: 842784e0d15b ("pm80xx: Update For Thermal Page Code")
Fixes: f5860992db55 ("[SCSI] pm80xx: Added SPCv/ve specific hardware functionalities and relevant changes in common files")
Reviewed-by: John Garry <[email protected]>
Reviewed-by: Jack Wang <[email protected]>
Signed-off-by: Damien Le Moal <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/pm8001/pm80xx_hwi.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c
index 9f0ce8668113..1b1033b4e310 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.c
+++ b/drivers/scsi/pm8001/pm80xx_hwi.c
@@ -1199,9 +1199,11 @@ pm80xx_set_thermal_config(struct pm8001_hba_info *pm8001_ha)
else
page_code = THERMAL_PAGE_CODE_8H;
- payload.cfg_pg[0] = (THERMAL_LOG_ENABLE << 9) |
- (THERMAL_ENABLE << 8) | page_code;
- payload.cfg_pg[1] = (LTEMPHIL << 24) | (RTEMPHIL << 8);
+ payload.cfg_pg[0] =
+ cpu_to_le32((THERMAL_LOG_ENABLE << 9) |
+ (THERMAL_ENABLE << 8) | page_code);
+ payload.cfg_pg[1] =
+ cpu_to_le32((LTEMPHIL << 24) | (RTEMPHIL << 8));
pm8001_dbg(pm8001_ha, DEV,
"Setting up thermal config. cfg_pg 0 0x%x cfg_pg 1 0x%x\n",
--
2.34.1
From: Tsuchiya Yuto <[email protected]>
[ Upstream commit 127efdbc51fe6064336c0452ce9c910b3e107cf0 ]
The dummy_ptr check in hmm_init() [1] results in the following
"hmm_init Failed to create sysfs" error exactly once every
two times on atomisp reload by rmmod/insmod (although atomisp module
loads and works fine regardless of this error):
[ 140.230662] sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:03.0/active_bo'
[ 140.230668] CPU: 1 PID: 2502 Comm: insmod Tainted: G C OE 5.15.0-rc4-1-surface-mainline #1 b8acf6eb64994414b2e20bad312a7a2c45f748f9
[ 140.230675] Hardware name: OEMB OEMB/OEMB, BIOS 1.51116.238 03/09/2015
[ 140.230678] Call Trace:
[ 140.230687] dump_stack_lvl+0x46/0x5a
[ 140.230702] sysfs_warn_dup.cold+0x17/0x24
[ 140.230710] sysfs_add_file_mode_ns+0x160/0x170
[ 140.230717] internal_create_group+0x126/0x390
[ 140.230723] hmm_init+0x5c/0x70 [atomisp 7a6a680bf400629363d2a6f58fd10e7299678b99]
[ 140.230811] atomisp_pci_probe.cold+0x1136/0x148e [atomisp 7a6a680bf400629363d2a6f58fd10e7299678b99]
[ 140.230875] local_pci_probe+0x45/0x80
[ 140.230882] ? pci_match_device+0xd7/0x130
[ 140.230887] pci_device_probe+0xfa/0x1b0
[ 140.230892] really_probe+0x1f5/0x3f0
[ 140.230899] __driver_probe_device+0xfe/0x180
[ 140.230903] driver_probe_device+0x1e/0x90
[ 140.230908] __driver_attach+0xc0/0x1c0
[ 140.230912] ? __device_attach_driver+0xe0/0xe0
[ 140.230915] ? __device_attach_driver+0xe0/0xe0
[ 140.230919] bus_for_each_dev+0x89/0xd0
[ 140.230924] bus_add_driver+0x12b/0x1e0
[ 140.230929] driver_register+0x8f/0xe0
[ 140.230933] ? 0xffffffffc153f000
[ 140.230937] do_one_initcall+0x57/0x220
[ 140.230945] do_init_module+0x5c/0x260
[ 140.230952] load_module+0x24bd/0x26a0
[ 140.230962] ? __do_sys_finit_module+0xae/0x110
[ 140.230966] __do_sys_finit_module+0xae/0x110
[ 140.230972] do_syscall_64+0x5c/0x80
[ 140.230979] ? syscall_exit_to_user_mode+0x23/0x40
[ 140.230983] ? do_syscall_64+0x69/0x80
[ 140.230988] ? exc_page_fault+0x72/0x170
[ 140.230991] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 140.230997] RIP: 0033:0x7f7fd5d8718d
[ 140.231003] Code: b4 0c 00 0f 05 eb a9 66 0f 1f 44 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d b3 6c 0c 00 f7 d8 64 89 01 48
[ 140.231006] RSP: 002b:00007ffefc25f0e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[ 140.231012] RAX: ffffffffffffffda RBX: 000055ac3edcd7f0 RCX: 00007f7fd5d8718d
[ 140.231015] RDX: 0000000000000000 RSI: 000055ac3d723270 RDI: 0000000000000003
[ 140.231017] RBP: 0000000000000000 R08: 0000000000000000 R09: 00007f7fd5e52380
[ 140.231019] R10: 0000000000000003 R11: 0000000000000246 R12: 000055ac3d723270
[ 140.231021] R13: 0000000000000000 R14: 000055ac3edd06e0 R15: 0000000000000000
[ 140.231038] atomisp-isp2 0000:00:03.0: hmm_init Failed to create sysfs
The problem is that dummy_ptr == 0 is a valid value. So, change the logic
which checks if dummy_ptr was allocated.
At this point, atomisp now gives WARN_ON() in hmm_free() [2] on atomisp
reload by rmmod/insmod. Again, the check is wrong there.
So, change both checks for mmgr_EXCEPTION, which is the error value when
HMM allocation fails, and initialize dummy_ptr with such value.
[1] added on commit
d9ab83953fa7 ("media: atomisp: don't cause a warn if probe failed")
[2] added on commit
b83cc378dfc4 ("atomisp: clean up the hmm init/cleanup indirections")
Link: https://lore.kernel.org/linux-media/[email protected]
Signed-off-by: Tsuchiya Yuto <[email protected]>
Co-developed-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/staging/media/atomisp/pci/hmm/hmm.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/staging/media/atomisp/pci/hmm/hmm.c b/drivers/staging/media/atomisp/pci/hmm/hmm.c
index 6a5ee4607089..c1cda16f2dc0 100644
--- a/drivers/staging/media/atomisp/pci/hmm/hmm.c
+++ b/drivers/staging/media/atomisp/pci/hmm/hmm.c
@@ -39,7 +39,7 @@
struct hmm_bo_device bo_device;
struct hmm_pool dynamic_pool;
struct hmm_pool reserved_pool;
-static ia_css_ptr dummy_ptr;
+static ia_css_ptr dummy_ptr = mmgr_EXCEPTION;
static bool hmm_initialized;
struct _hmm_mem_stat hmm_mem_stat;
@@ -209,7 +209,7 @@ int hmm_init(void)
void hmm_cleanup(void)
{
- if (!dummy_ptr)
+ if (dummy_ptr == mmgr_EXCEPTION)
return;
sysfs_remove_group(&atomisp_dev->kobj, atomisp_attribute_group);
@@ -288,7 +288,8 @@ void hmm_free(ia_css_ptr virt)
dev_dbg(atomisp_dev, "%s: free 0x%08x\n", __func__, virt);
- WARN_ON(!virt);
+ if (WARN_ON(virt == mmgr_EXCEPTION))
+ return;
bo = hmm_bo_device_search_start(&bo_device, (unsigned int)virt);
--
2.34.1
From: Zheyu Ma <[email protected]>
[ Upstream commit bb77bd31c281f70ec77c9c4f584950a779e05cf8 ]
When the driver fails to register net device, it should free the DMA
region first, and then do other cleanup.
Signed-off-by: Zheyu Ma <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/sun/sunhme.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/sun/sunhme.c b/drivers/net/ethernet/sun/sunhme.c
index 54b53dbdb33c..69fc47089e62 100644
--- a/drivers/net/ethernet/sun/sunhme.c
+++ b/drivers/net/ethernet/sun/sunhme.c
@@ -3163,7 +3163,7 @@ static int happy_meal_pci_probe(struct pci_dev *pdev,
if (err) {
printk(KERN_ERR "happymeal(PCI): Cannot register net device, "
"aborting.\n");
- goto err_out_iounmap;
+ goto err_out_free_coherent;
}
pci_set_drvdata(pdev, hp);
@@ -3196,6 +3196,10 @@ static int happy_meal_pci_probe(struct pci_dev *pdev,
return 0;
+err_out_free_coherent:
+ dma_free_coherent(hp->dma_dev, PAGE_SIZE,
+ hp->happy_block, hp->hblock_dvma);
+
err_out_iounmap:
iounmap(hp->gregs);
--
2.34.1
From: Filipe Manana <[email protected]>
[ Upstream commit 1f4613cdbe7739ce291554b316bff8e551383389 ]
When reflinking an inline extent, we assert that its file offset is 0 and
that its uncompressed length is not greater than the sector size. We then
return an error if one of those conditions is not satisfied. However we
use a return statement, which results in returning from btrfs_clone()
without freeing the path and buffer that were allocated before, as well as
not clearing the flag BTRFS_INODE_NO_DELALLOC_FLUSH for the destination
inode.
Fix that by jumping to the 'out' label instead, and also add a WARN_ON()
for each condition so that in case assertions are disabled, we get to
known which of the unexpected conditions triggered the error.
Fixes: a61e1e0df9f321 ("Btrfs: simplify inline extent handling when doing reflinks")
Signed-off-by: Filipe Manana <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/btrfs/reflink.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/fs/btrfs/reflink.c b/fs/btrfs/reflink.c
index 3a3102bc15a0..4b3ae0faf548 100644
--- a/fs/btrfs/reflink.c
+++ b/fs/btrfs/reflink.c
@@ -503,8 +503,11 @@ static int btrfs_clone(struct inode *src, struct inode *inode,
*/
ASSERT(key.offset == 0);
ASSERT(datal <= fs_info->sectorsize);
- if (key.offset != 0 || datal > fs_info->sectorsize)
- return -EUCLEAN;
+ if (WARN_ON(key.offset != 0) ||
+ WARN_ON(datal > fs_info->sectorsize)) {
+ ret = -EUCLEAN;
+ goto out;
+ }
ret = clone_copy_inline_extent(inode, path, &new_key,
drop_start, datal, size,
--
2.34.1
From: Herbert Xu <[email protected]>
commit c8bd296cca3434b13b28b074eaeb78a23284de77 upstream.
The algorithm __cbc-aes-neonbs requires a fallback so we need
to select the config options for them or otherwise it will fail
to register on boot-up.
Fixes: 00b99ad2bac2 ("crypto: arm/aes-neonbs - Use generic cbc...")
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/crypto/Kconfig | 2 ++
1 file changed, 2 insertions(+)
--- a/arch/arm/crypto/Kconfig
+++ b/arch/arm/crypto/Kconfig
@@ -83,6 +83,8 @@ config CRYPTO_AES_ARM_BS
depends on KERNEL_MODE_NEON
select CRYPTO_SKCIPHER
select CRYPTO_LIB_AES
+ select CRYPTO_AES
+ select CRYPTO_CBC
select CRYPTO_SIMD
help
Use a faster and more secure NEON based implementation of AES in CBC,
From: Shengjiu Wang <[email protected]>
[ Upstream commit 6ddf611219ba8f7c8fa0d26b39710a641e7d37a5 ]
The TX clock source may be changed in next case, need to
disable it when stop, otherwise the TX may not work after
changing the clock source, error log is:
aplay: pcm_write:2058: write error: Input/output error
Fixes: a2388a498ad2 ("ASoC: fsl: Add S/PDIF CPU DAI driver")
Signed-off-by: Shengjiu Wang <[email protected]>
Reviewed-by: Fabio Estevam <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/fsl/fsl_spdif.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/sound/soc/fsl/fsl_spdif.c b/sound/soc/fsl/fsl_spdif.c
index 15bcb0f38ec9..d01e8d516df1 100644
--- a/sound/soc/fsl/fsl_spdif.c
+++ b/sound/soc/fsl/fsl_spdif.c
@@ -544,6 +544,8 @@ static void fsl_spdif_shutdown(struct snd_pcm_substream *substream,
mask = SCR_TXFIFO_AUTOSYNC_MASK | SCR_TXFIFO_CTRL_MASK |
SCR_TXSEL_MASK | SCR_USRC_SEL_MASK |
SCR_TXFIFO_FSEL_MASK;
+ /* Disable TX clock */
+ regmap_update_bits(regmap, REG_SPDIF_STC, STC_TXCLK_ALL_EN_MASK, 0);
} else {
scr = SCR_RXFIFO_OFF | SCR_RXFIFO_CTL_ZERO;
mask = SCR_RXFIFO_FSEL_MASK | SCR_RXFIFO_AUTOSYNC_MASK|
--
2.34.1
From: Claudiu Beznea <[email protected]>
[ Upstream commit ff10ee97cb203262e88d9c8bc87369cbd4004a0c ]
Use notrace for mchp_pit64b_sched_read_clk() to avoid recursive call of
prepare_ftrace_return() when issuing:
echo function_graph > /sys/kernel/debug/tracing/current_tracer
Fixes: 625022a5f160 ("clocksource/drivers/timer-microchip-pit64b: Add Microchip PIT64B support")
Signed-off-by: Claudiu Beznea <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Daniel Lezcano <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clocksource/timer-microchip-pit64b.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/clocksource/timer-microchip-pit64b.c b/drivers/clocksource/timer-microchip-pit64b.c
index 59e11ca8ee73..5c9485cb4e05 100644
--- a/drivers/clocksource/timer-microchip-pit64b.c
+++ b/drivers/clocksource/timer-microchip-pit64b.c
@@ -121,7 +121,7 @@ static u64 mchp_pit64b_clksrc_read(struct clocksource *cs)
return mchp_pit64b_cnt_read(mchp_pit64b_cs_base);
}
-static u64 mchp_pit64b_sched_read_clk(void)
+static u64 notrace mchp_pit64b_sched_read_clk(void)
{
return mchp_pit64b_cnt_read(mchp_pit64b_cs_base);
}
--
2.34.1
From: Jonathan Cameron <[email protected]>
[ Upstream commit f281e4ddbbc0b60f061bc18a2834e9363ba85f9f ]
The bit reversal was wrong for bits 1 and 3 of the 5 bits.
Result is driver failure to probe if you have more than 2 daisy-chained
devices. Discovered via QEMU based device emulation.
Fixes tag is for when this moved from a macro to a function, but it
was broken before that.
Signed-off-by: Jonathan Cameron <[email protected]>
Fixes: 065a7c0b1fec ("Staging: iio: adc: ad7280a.c: Fixed Macro argument reuse")
Reviewed-by: Marcelo Schmitt <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/staging/iio/adc/ad7280a.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/staging/iio/adc/ad7280a.c b/drivers/staging/iio/adc/ad7280a.c
index fef0055b8990..20183b2ea127 100644
--- a/drivers/staging/iio/adc/ad7280a.c
+++ b/drivers/staging/iio/adc/ad7280a.c
@@ -107,9 +107,9 @@
static unsigned int ad7280a_devaddr(unsigned int addr)
{
return ((addr & 0x1) << 4) |
- ((addr & 0x2) << 3) |
+ ((addr & 0x2) << 2) |
(addr & 0x4) |
- ((addr & 0x8) >> 3) |
+ ((addr & 0x8) >> 2) |
((addr & 0x10) >> 4);
}
--
2.34.1
From: Jens Axboe <[email protected]>
[ Upstream commit 5e929367468c8f97cd1ffb0417316cecfebef94b ]
The fix for not advancing the iterator if we're using fixed buffers is
broken in that it can hit a condition where we don't terminate the loop.
This results in io-wq looping forever, asking to read (or write) 0 bytes
for every subsequent loop.
Reported-by: Joel Jaeschke <[email protected]>
Link: https://github.com/axboe/liburing/issues/549
Fixes: 16c8d2df7ec0 ("io_uring: ensure symmetry in handling iter types in loop_rw_iter()")
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/io_uring.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/fs/io_uring.c b/fs/io_uring.c
index fd188b972151..82f1311dab8e 100644
--- a/fs/io_uring.c
+++ b/fs/io_uring.c
@@ -3220,13 +3220,15 @@ static ssize_t loop_rw_iter(int rw, struct io_kiocb *req, struct iov_iter *iter)
ret = nr;
break;
}
+ ret += nr;
if (!iov_iter_is_bvec(iter)) {
iov_iter_advance(iter, nr);
} else {
- req->rw.len -= nr;
req->rw.addr += nr;
+ req->rw.len -= nr;
+ if (!req->rw.len)
+ break;
}
- ret += nr;
if (nr != iovec.iov_len)
break;
}
--
2.34.1
From: Rob Herring <[email protected]>
[ Upstream commit 37cbd3c522869247ed4525b5042ff4c6a276c813 ]
A label reference without brackets is a path string, not a phandle as
intended. Add the missing brackets.
Fixes: a5002c41c383 ("arm64: dts: rockchip: add WiFi module support for Firefly-RK3399")
Signed-off-by: Rob Herring <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Heiko Stuebner <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/rockchip/rk3399-firefly.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts
index 6db18808b9c5..dc45ec372ada 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts
@@ -665,8 +665,8 @@
sd-uhs-sdr104;
/* Power supply */
- vqmmc-supply = &vcc1v8_s3; /* IO line */
- vmmc-supply = &vcc_sdio; /* card's power */
+ vqmmc-supply = <&vcc1v8_s3>; /* IO line */
+ vmmc-supply = <&vcc_sdio>; /* card's power */
#address-cells = <1>;
#size-cells = <0>;
--
2.34.1
From: Sven Eckelmann <[email protected]>
commit 6340dcbd619450c1bb55eb999e554e4f0e6dab0a upstream.
The commit b37a46683739 ("netdevice: add the case if dev is NULL") changed
the way how the NULL check for net_devices have to be handled when trying
to reduce its reference counter. Before this commit, it was the
responsibility of the caller to check whether the object is NULL or not.
But it was changed to behave more like kfree. Now the callee has to handle
the NULL-case.
The batman-adv code was scanned via cocinelle for similar places. These
were changed to use the paradigm
@@
identifier E, T, R, C;
identifier put;
@@
void put(struct T *E)
{
+ if (!E)
+ return;
kref_put(&E->C, R);
}
Functions which were used in other sources files were moved to the header
to allow the compiler to inline the NULL check and the kref_put call.
Signed-off-by: Sven Eckelmann <[email protected]>
Signed-off-by: Simon Wunderlich <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/batman-adv/bridge_loop_avoidance.c | 6 ++
net/batman-adv/distributed-arp-table.c | 3 +
net/batman-adv/gateway_client.c | 12 ----
net/batman-adv/gateway_client.h | 16 +++++
net/batman-adv/hard-interface.h | 3 +
net/batman-adv/network-coding.c | 6 ++
net/batman-adv/originator.c | 72 ++----------------------
net/batman-adv/originator.h | 96 ++++++++++++++++++++++++++++++---
net/batman-adv/soft-interface.c | 15 -----
net/batman-adv/soft-interface.h | 16 +++++
net/batman-adv/tp_meter.c | 3 +
net/batman-adv/translation-table.c | 22 +++----
net/batman-adv/translation-table.h | 18 +++++-
net/batman-adv/tvlv.c | 6 ++
14 files changed, 181 insertions(+), 113 deletions(-)
--- a/net/batman-adv/bridge_loop_avoidance.c
+++ b/net/batman-adv/bridge_loop_avoidance.c
@@ -164,6 +164,9 @@ static void batadv_backbone_gw_release(s
*/
static void batadv_backbone_gw_put(struct batadv_bla_backbone_gw *backbone_gw)
{
+ if (!backbone_gw)
+ return;
+
kref_put(&backbone_gw->refcount, batadv_backbone_gw_release);
}
@@ -199,6 +202,9 @@ static void batadv_claim_release(struct
*/
static void batadv_claim_put(struct batadv_bla_claim *claim)
{
+ if (!claim)
+ return;
+
kref_put(&claim->refcount, batadv_claim_release);
}
--- a/net/batman-adv/distributed-arp-table.c
+++ b/net/batman-adv/distributed-arp-table.c
@@ -128,6 +128,9 @@ static void batadv_dat_entry_release(str
*/
static void batadv_dat_entry_put(struct batadv_dat_entry *dat_entry)
{
+ if (!dat_entry)
+ return;
+
kref_put(&dat_entry->refcount, batadv_dat_entry_release);
}
--- a/net/batman-adv/gateway_client.c
+++ b/net/batman-adv/gateway_client.c
@@ -60,7 +60,7 @@
* after rcu grace period
* @ref: kref pointer of the gw_node
*/
-static void batadv_gw_node_release(struct kref *ref)
+void batadv_gw_node_release(struct kref *ref)
{
struct batadv_gw_node *gw_node;
@@ -71,16 +71,6 @@ static void batadv_gw_node_release(struc
}
/**
- * batadv_gw_node_put() - decrement the gw_node refcounter and possibly release
- * it
- * @gw_node: gateway node to free
- */
-void batadv_gw_node_put(struct batadv_gw_node *gw_node)
-{
- kref_put(&gw_node->refcount, batadv_gw_node_release);
-}
-
-/**
* batadv_gw_get_selected_gw_node() - Get currently selected gateway
* @bat_priv: the bat priv with all the soft interface information
*
--- a/net/batman-adv/gateway_client.h
+++ b/net/batman-adv/gateway_client.h
@@ -9,6 +9,7 @@
#include "main.h"
+#include <linux/kref.h>
#include <linux/netlink.h>
#include <linux/seq_file.h>
#include <linux/skbuff.h>
@@ -28,7 +29,7 @@ void batadv_gw_node_update(struct batadv
void batadv_gw_node_delete(struct batadv_priv *bat_priv,
struct batadv_orig_node *orig_node);
void batadv_gw_node_free(struct batadv_priv *bat_priv);
-void batadv_gw_node_put(struct batadv_gw_node *gw_node);
+void batadv_gw_node_release(struct kref *ref);
struct batadv_gw_node *
batadv_gw_get_selected_gw_node(struct batadv_priv *bat_priv);
int batadv_gw_client_seq_print_text(struct seq_file *seq, void *offset);
@@ -40,4 +41,17 @@ batadv_gw_dhcp_recipient_get(struct sk_b
struct batadv_gw_node *batadv_gw_node_get(struct batadv_priv *bat_priv,
struct batadv_orig_node *orig_node);
+/**
+ * batadv_gw_node_put() - decrement the gw_node refcounter and possibly release
+ * it
+ * @gw_node: gateway node to free
+ */
+static inline void batadv_gw_node_put(struct batadv_gw_node *gw_node)
+{
+ if (!gw_node)
+ return;
+
+ kref_put(&gw_node->refcount, batadv_gw_node_release);
+}
+
#endif /* _NET_BATMAN_ADV_GATEWAY_CLIENT_H_ */
--- a/net/batman-adv/hard-interface.h
+++ b/net/batman-adv/hard-interface.h
@@ -113,6 +113,9 @@ int batadv_hardif_no_broadcast(struct ba
*/
static inline void batadv_hardif_put(struct batadv_hard_iface *hard_iface)
{
+ if (!hard_iface)
+ return;
+
kref_put(&hard_iface->refcount, batadv_hardif_release);
}
--- a/net/batman-adv/network-coding.c
+++ b/net/batman-adv/network-coding.c
@@ -222,6 +222,9 @@ static void batadv_nc_node_release(struc
*/
static void batadv_nc_node_put(struct batadv_nc_node *nc_node)
{
+ if (!nc_node)
+ return;
+
kref_put(&nc_node->refcount, batadv_nc_node_release);
}
@@ -246,6 +249,9 @@ static void batadv_nc_path_release(struc
*/
static void batadv_nc_path_put(struct batadv_nc_path *nc_path)
{
+ if (!nc_path)
+ return;
+
kref_put(&nc_path->refcount, batadv_nc_path_release);
}
--- a/net/batman-adv/originator.c
+++ b/net/batman-adv/originator.c
@@ -178,7 +178,7 @@ out:
* and queue for free after rcu grace period
* @ref: kref pointer of the originator-vlan object
*/
-static void batadv_orig_node_vlan_release(struct kref *ref)
+void batadv_orig_node_vlan_release(struct kref *ref)
{
struct batadv_orig_node_vlan *orig_vlan;
@@ -188,16 +188,6 @@ static void batadv_orig_node_vlan_releas
}
/**
- * batadv_orig_node_vlan_put() - decrement the refcounter and possibly release
- * the originator-vlan object
- * @orig_vlan: the originator-vlan object to release
- */
-void batadv_orig_node_vlan_put(struct batadv_orig_node_vlan *orig_vlan)
-{
- kref_put(&orig_vlan->refcount, batadv_orig_node_vlan_release);
-}
-
-/**
* batadv_originator_init() - Initialize all originator structures
* @bat_priv: the bat priv with all the soft interface information
*
@@ -232,7 +222,7 @@ err:
* free after rcu grace period
* @ref: kref pointer of the neigh_ifinfo
*/
-static void batadv_neigh_ifinfo_release(struct kref *ref)
+void batadv_neigh_ifinfo_release(struct kref *ref)
{
struct batadv_neigh_ifinfo *neigh_ifinfo;
@@ -245,21 +235,11 @@ static void batadv_neigh_ifinfo_release(
}
/**
- * batadv_neigh_ifinfo_put() - decrement the refcounter and possibly release
- * the neigh_ifinfo
- * @neigh_ifinfo: the neigh_ifinfo object to release
- */
-void batadv_neigh_ifinfo_put(struct batadv_neigh_ifinfo *neigh_ifinfo)
-{
- kref_put(&neigh_ifinfo->refcount, batadv_neigh_ifinfo_release);
-}
-
-/**
* batadv_hardif_neigh_release() - release hardif neigh node from lists and
* queue for free after rcu grace period
* @ref: kref pointer of the neigh_node
*/
-static void batadv_hardif_neigh_release(struct kref *ref)
+void batadv_hardif_neigh_release(struct kref *ref)
{
struct batadv_hardif_neigh_node *hardif_neigh;
@@ -275,21 +255,11 @@ static void batadv_hardif_neigh_release(
}
/**
- * batadv_hardif_neigh_put() - decrement the hardif neighbors refcounter
- * and possibly release it
- * @hardif_neigh: hardif neigh neighbor to free
- */
-void batadv_hardif_neigh_put(struct batadv_hardif_neigh_node *hardif_neigh)
-{
- kref_put(&hardif_neigh->refcount, batadv_hardif_neigh_release);
-}
-
-/**
* batadv_neigh_node_release() - release neigh_node from lists and queue for
* free after rcu grace period
* @ref: kref pointer of the neigh_node
*/
-static void batadv_neigh_node_release(struct kref *ref)
+void batadv_neigh_node_release(struct kref *ref)
{
struct hlist_node *node_tmp;
struct batadv_neigh_node *neigh_node;
@@ -310,16 +280,6 @@ static void batadv_neigh_node_release(st
}
/**
- * batadv_neigh_node_put() - decrement the neighbors refcounter and possibly
- * release it
- * @neigh_node: neigh neighbor to free
- */
-void batadv_neigh_node_put(struct batadv_neigh_node *neigh_node)
-{
- kref_put(&neigh_node->refcount, batadv_neigh_node_release);
-}
-
-/**
* batadv_orig_router_get() - router to the originator depending on iface
* @orig_node: the orig node for the router
* @if_outgoing: the interface where the payload packet has been received or
@@ -851,7 +811,7 @@ int batadv_hardif_neigh_dump(struct sk_b
* free after rcu grace period
* @ref: kref pointer of the orig_ifinfo
*/
-static void batadv_orig_ifinfo_release(struct kref *ref)
+void batadv_orig_ifinfo_release(struct kref *ref)
{
struct batadv_orig_ifinfo *orig_ifinfo;
struct batadv_neigh_node *router;
@@ -870,16 +830,6 @@ static void batadv_orig_ifinfo_release(s
}
/**
- * batadv_orig_ifinfo_put() - decrement the refcounter and possibly release
- * the orig_ifinfo
- * @orig_ifinfo: the orig_ifinfo object to release
- */
-void batadv_orig_ifinfo_put(struct batadv_orig_ifinfo *orig_ifinfo)
-{
- kref_put(&orig_ifinfo->refcount, batadv_orig_ifinfo_release);
-}
-
-/**
* batadv_orig_node_free_rcu() - free the orig_node
* @rcu: rcu pointer of the orig_node
*/
@@ -902,7 +852,7 @@ static void batadv_orig_node_free_rcu(st
* free after rcu grace period
* @ref: kref pointer of the orig_node
*/
-static void batadv_orig_node_release(struct kref *ref)
+void batadv_orig_node_release(struct kref *ref)
{
struct hlist_node *node_tmp;
struct batadv_neigh_node *neigh_node;
@@ -949,16 +899,6 @@ static void batadv_orig_node_release(str
}
/**
- * batadv_orig_node_put() - decrement the orig node refcounter and possibly
- * release it
- * @orig_node: the orig node to free
- */
-void batadv_orig_node_put(struct batadv_orig_node *orig_node)
-{
- kref_put(&orig_node->refcount, batadv_orig_node_release);
-}
-
-/**
* batadv_originator_free() - Free all originator structures
* @bat_priv: the bat priv with all the soft interface information
*/
--- a/net/batman-adv/originator.h
+++ b/net/batman-adv/originator.h
@@ -12,6 +12,7 @@
#include <linux/compiler.h>
#include <linux/if_ether.h>
#include <linux/jhash.h>
+#include <linux/kref.h>
#include <linux/netlink.h>
#include <linux/seq_file.h>
#include <linux/skbuff.h>
@@ -21,19 +22,18 @@ bool batadv_compare_orig(const struct hl
int batadv_originator_init(struct batadv_priv *bat_priv);
void batadv_originator_free(struct batadv_priv *bat_priv);
void batadv_purge_orig_ref(struct batadv_priv *bat_priv);
-void batadv_orig_node_put(struct batadv_orig_node *orig_node);
+void batadv_orig_node_release(struct kref *ref);
struct batadv_orig_node *batadv_orig_node_new(struct batadv_priv *bat_priv,
const u8 *addr);
struct batadv_hardif_neigh_node *
batadv_hardif_neigh_get(const struct batadv_hard_iface *hard_iface,
const u8 *neigh_addr);
-void
-batadv_hardif_neigh_put(struct batadv_hardif_neigh_node *hardif_neigh);
+void batadv_hardif_neigh_release(struct kref *ref);
struct batadv_neigh_node *
batadv_neigh_node_get_or_create(struct batadv_orig_node *orig_node,
struct batadv_hard_iface *hard_iface,
const u8 *neigh_addr);
-void batadv_neigh_node_put(struct batadv_neigh_node *neigh_node);
+void batadv_neigh_node_release(struct kref *ref);
struct batadv_neigh_node *
batadv_orig_router_get(struct batadv_orig_node *orig_node,
const struct batadv_hard_iface *if_outgoing);
@@ -43,7 +43,7 @@ batadv_neigh_ifinfo_new(struct batadv_ne
struct batadv_neigh_ifinfo *
batadv_neigh_ifinfo_get(struct batadv_neigh_node *neigh,
struct batadv_hard_iface *if_outgoing);
-void batadv_neigh_ifinfo_put(struct batadv_neigh_ifinfo *neigh_ifinfo);
+void batadv_neigh_ifinfo_release(struct kref *ref);
int batadv_hardif_neigh_dump(struct sk_buff *msg, struct netlink_callback *cb);
int batadv_hardif_neigh_seq_print_text(struct seq_file *seq, void *offset);
@@ -54,7 +54,7 @@ batadv_orig_ifinfo_get(struct batadv_ori
struct batadv_orig_ifinfo *
batadv_orig_ifinfo_new(struct batadv_orig_node *orig_node,
struct batadv_hard_iface *if_outgoing);
-void batadv_orig_ifinfo_put(struct batadv_orig_ifinfo *orig_ifinfo);
+void batadv_orig_ifinfo_release(struct kref *ref);
int batadv_orig_seq_print_text(struct seq_file *seq, void *offset);
int batadv_orig_dump(struct sk_buff *msg, struct netlink_callback *cb);
@@ -65,7 +65,7 @@ batadv_orig_node_vlan_new(struct batadv_
struct batadv_orig_node_vlan *
batadv_orig_node_vlan_get(struct batadv_orig_node *orig_node,
unsigned short vid);
-void batadv_orig_node_vlan_put(struct batadv_orig_node_vlan *orig_vlan);
+void batadv_orig_node_vlan_release(struct kref *ref);
/**
* batadv_choose_orig() - Return the index of the orig entry in the hash table
@@ -86,4 +86,86 @@ static inline u32 batadv_choose_orig(con
struct batadv_orig_node *
batadv_orig_hash_find(struct batadv_priv *bat_priv, const void *data);
+/**
+ * batadv_orig_node_vlan_put() - decrement the refcounter and possibly release
+ * the originator-vlan object
+ * @orig_vlan: the originator-vlan object to release
+ */
+static inline void
+batadv_orig_node_vlan_put(struct batadv_orig_node_vlan *orig_vlan)
+{
+ if (!orig_vlan)
+ return;
+
+ kref_put(&orig_vlan->refcount, batadv_orig_node_vlan_release);
+}
+
+/**
+ * batadv_neigh_ifinfo_put() - decrement the refcounter and possibly release
+ * the neigh_ifinfo
+ * @neigh_ifinfo: the neigh_ifinfo object to release
+ */
+static inline void
+batadv_neigh_ifinfo_put(struct batadv_neigh_ifinfo *neigh_ifinfo)
+{
+ if (!neigh_ifinfo)
+ return;
+
+ kref_put(&neigh_ifinfo->refcount, batadv_neigh_ifinfo_release);
+}
+
+/**
+ * batadv_hardif_neigh_put() - decrement the hardif neighbors refcounter
+ * and possibly release it
+ * @hardif_neigh: hardif neigh neighbor to free
+ */
+static inline void
+batadv_hardif_neigh_put(struct batadv_hardif_neigh_node *hardif_neigh)
+{
+ if (!hardif_neigh)
+ return;
+
+ kref_put(&hardif_neigh->refcount, batadv_hardif_neigh_release);
+}
+
+/**
+ * batadv_neigh_node_put() - decrement the neighbors refcounter and possibly
+ * release it
+ * @neigh_node: neigh neighbor to free
+ */
+static inline void batadv_neigh_node_put(struct batadv_neigh_node *neigh_node)
+{
+ if (!neigh_node)
+ return;
+
+ kref_put(&neigh_node->refcount, batadv_neigh_node_release);
+}
+
+/**
+ * batadv_orig_ifinfo_put() - decrement the refcounter and possibly release
+ * the orig_ifinfo
+ * @orig_ifinfo: the orig_ifinfo object to release
+ */
+static inline void
+batadv_orig_ifinfo_put(struct batadv_orig_ifinfo *orig_ifinfo)
+{
+ if (!orig_ifinfo)
+ return;
+
+ kref_put(&orig_ifinfo->refcount, batadv_orig_ifinfo_release);
+}
+
+/**
+ * batadv_orig_node_put() - decrement the orig node refcounter and possibly
+ * release it
+ * @orig_node: the orig node to free
+ */
+static inline void batadv_orig_node_put(struct batadv_orig_node *orig_node)
+{
+ if (!orig_node)
+ return;
+
+ kref_put(&orig_node->refcount, batadv_orig_node_release);
+}
+
#endif /* _NET_BATMAN_ADV_ORIGINATOR_H_ */
--- a/net/batman-adv/soft-interface.c
+++ b/net/batman-adv/soft-interface.c
@@ -512,7 +512,7 @@ out:
* after rcu grace period
* @ref: kref pointer of the vlan object
*/
-static void batadv_softif_vlan_release(struct kref *ref)
+void batadv_softif_vlan_release(struct kref *ref)
{
struct batadv_softif_vlan *vlan;
@@ -526,19 +526,6 @@ static void batadv_softif_vlan_release(s
}
/**
- * batadv_softif_vlan_put() - decrease the vlan object refcounter and
- * possibly release it
- * @vlan: the vlan object to release
- */
-void batadv_softif_vlan_put(struct batadv_softif_vlan *vlan)
-{
- if (!vlan)
- return;
-
- kref_put(&vlan->refcount, batadv_softif_vlan_release);
-}
-
-/**
* batadv_softif_vlan_get() - get the vlan object for a specific vid
* @bat_priv: the bat priv with all the soft interface information
* @vid: the identifier of the vlan object to retrieve
--- a/net/batman-adv/soft-interface.h
+++ b/net/batman-adv/soft-interface.h
@@ -9,6 +9,7 @@
#include "main.h"
+#include <linux/kref.h>
#include <linux/netdevice.h>
#include <linux/skbuff.h>
#include <linux/types.h>
@@ -24,8 +25,21 @@ void batadv_softif_destroy_sysfs(struct
bool batadv_softif_is_valid(const struct net_device *net_dev);
extern struct rtnl_link_ops batadv_link_ops;
int batadv_softif_create_vlan(struct batadv_priv *bat_priv, unsigned short vid);
-void batadv_softif_vlan_put(struct batadv_softif_vlan *softif_vlan);
+void batadv_softif_vlan_release(struct kref *ref);
struct batadv_softif_vlan *batadv_softif_vlan_get(struct batadv_priv *bat_priv,
unsigned short vid);
+/**
+ * batadv_softif_vlan_put() - decrease the vlan object refcounter and
+ * possibly release it
+ * @vlan: the vlan object to release
+ */
+static inline void batadv_softif_vlan_put(struct batadv_softif_vlan *vlan)
+{
+ if (!vlan)
+ return;
+
+ kref_put(&vlan->refcount, batadv_softif_vlan_release);
+}
+
#endif /* _NET_BATMAN_ADV_SOFT_INTERFACE_H_ */
--- a/net/batman-adv/tp_meter.c
+++ b/net/batman-adv/tp_meter.c
@@ -357,6 +357,9 @@ static void batadv_tp_vars_release(struc
*/
static void batadv_tp_vars_put(struct batadv_tp_vars *tp_vars)
{
+ if (!tp_vars)
+ return;
+
kref_put(&tp_vars->refcount, batadv_tp_vars_release);
}
--- a/net/batman-adv/translation-table.c
+++ b/net/batman-adv/translation-table.c
@@ -248,6 +248,9 @@ static void batadv_tt_local_entry_releas
static void
batadv_tt_local_entry_put(struct batadv_tt_local_entry *tt_local_entry)
{
+ if (!tt_local_entry)
+ return;
+
kref_put(&tt_local_entry->common.refcount,
batadv_tt_local_entry_release);
}
@@ -271,7 +274,7 @@ static void batadv_tt_global_entry_free_
* queue for free after rcu grace period
* @ref: kref pointer of the nc_node
*/
-static void batadv_tt_global_entry_release(struct kref *ref)
+void batadv_tt_global_entry_release(struct kref *ref)
{
struct batadv_tt_global_entry *tt_global_entry;
@@ -284,17 +287,6 @@ static void batadv_tt_global_entry_relea
}
/**
- * batadv_tt_global_entry_put() - decrement the tt_global_entry refcounter and
- * possibly release it
- * @tt_global_entry: tt_global_entry to be free'd
- */
-void batadv_tt_global_entry_put(struct batadv_tt_global_entry *tt_global_entry)
-{
- kref_put(&tt_global_entry->common.refcount,
- batadv_tt_global_entry_release);
-}
-
-/**
* batadv_tt_global_hash_count() - count the number of orig entries
* @bat_priv: the bat priv with all the soft interface information
* @addr: the mac address of the client to count entries for
@@ -453,6 +445,9 @@ static void batadv_tt_orig_list_entry_re
static void
batadv_tt_orig_list_entry_put(struct batadv_tt_orig_list_entry *orig_entry)
{
+ if (!orig_entry)
+ return;
+
kref_put(&orig_entry->refcount, batadv_tt_orig_list_entry_release);
}
@@ -2818,6 +2813,9 @@ static void batadv_tt_req_node_release(s
*/
static void batadv_tt_req_node_put(struct batadv_tt_req_node *tt_req_node)
{
+ if (!tt_req_node)
+ return;
+
kref_put(&tt_req_node->refcount, batadv_tt_req_node_release);
}
--- a/net/batman-adv/translation-table.h
+++ b/net/batman-adv/translation-table.h
@@ -9,6 +9,7 @@
#include "main.h"
+#include <linux/kref.h>
#include <linux/netdevice.h>
#include <linux/netlink.h>
#include <linux/seq_file.h>
@@ -31,7 +32,7 @@ void batadv_tt_global_del_orig(struct ba
struct batadv_tt_global_entry *
batadv_tt_global_hash_find(struct batadv_priv *bat_priv, const u8 *addr,
unsigned short vid);
-void batadv_tt_global_entry_put(struct batadv_tt_global_entry *tt_global_entry);
+void batadv_tt_global_entry_release(struct kref *ref);
int batadv_tt_global_hash_count(struct batadv_priv *bat_priv,
const u8 *addr, unsigned short vid);
struct batadv_orig_node *batadv_transtable_search(struct batadv_priv *bat_priv,
@@ -58,4 +59,19 @@ bool batadv_tt_global_is_isolated(struct
int batadv_tt_cache_init(void);
void batadv_tt_cache_destroy(void);
+/**
+ * batadv_tt_global_entry_put() - decrement the tt_global_entry refcounter and
+ * possibly release it
+ * @tt_global_entry: tt_global_entry to be free'd
+ */
+static inline void
+batadv_tt_global_entry_put(struct batadv_tt_global_entry *tt_global_entry)
+{
+ if (!tt_global_entry)
+ return;
+
+ kref_put(&tt_global_entry->common.refcount,
+ batadv_tt_global_entry_release);
+}
+
#endif /* _NET_BATMAN_ADV_TRANSLATION_TABLE_H_ */
--- a/net/batman-adv/tvlv.c
+++ b/net/batman-adv/tvlv.c
@@ -50,6 +50,9 @@ static void batadv_tvlv_handler_release(
*/
static void batadv_tvlv_handler_put(struct batadv_tvlv_handler *tvlv_handler)
{
+ if (!tvlv_handler)
+ return;
+
kref_put(&tvlv_handler->refcount, batadv_tvlv_handler_release);
}
@@ -106,6 +109,9 @@ static void batadv_tvlv_container_releas
*/
static void batadv_tvlv_container_put(struct batadv_tvlv_container *tvlv)
{
+ if (!tvlv)
+ return;
+
kref_put(&tvlv->refcount, batadv_tvlv_container_release);
}
From: Fabiano Rosas <[email protected]>
[ Upstream commit b99234b918c6e36b9aa0a5b2981e86b6bd11f8e2 ]
The MMIO emulation code for vector instructions is duplicated between
VSX and VMX. When emulating VMX we should check the VMX copy size
instead of the VSX one.
Fixes: acc9eb9305fe ("KVM: PPC: Reimplement LOAD_VMX/STORE_VMX instruction ...")
Signed-off-by: Fabiano Rosas <[email protected]>
Reviewed-by: Nicholas Piggin <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/kvm/powerpc.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/kvm/powerpc.c b/arch/powerpc/kvm/powerpc.c
index 543db9157f3b..ef8077a739b8 100644
--- a/arch/powerpc/kvm/powerpc.c
+++ b/arch/powerpc/kvm/powerpc.c
@@ -1500,7 +1500,7 @@ int kvmppc_handle_vmx_load(struct kvm_vcpu *vcpu,
{
enum emulation_result emulated = EMULATE_DONE;
- if (vcpu->arch.mmio_vsx_copy_nums > 2)
+ if (vcpu->arch.mmio_vmx_copy_nums > 2)
return EMULATE_FAIL;
while (vcpu->arch.mmio_vmx_copy_nums) {
@@ -1597,7 +1597,7 @@ int kvmppc_handle_vmx_store(struct kvm_vcpu *vcpu,
unsigned int index = rs & KVM_MMIO_REG_MASK;
enum emulation_result emulated = EMULATE_DONE;
- if (vcpu->arch.mmio_vsx_copy_nums > 2)
+ if (vcpu->arch.mmio_vmx_copy_nums > 2)
return EMULATE_FAIL;
vcpu->arch.io_gpr = rs;
--
2.34.1
From: Michael S. Tsirkin <[email protected]>
[ Upstream commit 0e7174b9d5877130fec41fb4a16e0c2ee4958d44 ]
A common pattern for device reset is currently:
vdev->config->reset(vdev);
.. cleanup ..
reset prevents new interrupts from arriving and waits for interrupt
handlers to finish.
However if - as is common - the handler queues a work request which is
flushed during the cleanup stage, we have code adding buffers / trying
to get buffers while device is reset. Not good.
This was reproduced by running
modprobe virtio_console
modprobe -r virtio_console
in a loop.
Fix this up by calling virtio_break_device + flush before reset.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1786239
Signed-off-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/char/virtio_console.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/char/virtio_console.c b/drivers/char/virtio_console.c
index 673522874cec..3dd4deb60adb 100644
--- a/drivers/char/virtio_console.c
+++ b/drivers/char/virtio_console.c
@@ -1959,6 +1959,13 @@ static void virtcons_remove(struct virtio_device *vdev)
list_del(&portdev->list);
spin_unlock_irq(&pdrvdata_lock);
+ /* Device is going away, exit any polling for buffers */
+ virtio_break_device(vdev);
+ if (use_multiport(portdev))
+ flush_work(&portdev->control_work);
+ else
+ flush_work(&portdev->config_work);
+
/* Disable interrupts for vqs */
vdev->config->reset(vdev);
/* Finish up work that's lined up */
--
2.34.1
From: Jiasheng Jiang <[email protected]>
[ Upstream commit fd7bd80b46373887b390852f490f21b07e209498 ]
As the potential failure of the devm_request_threaded_irq(),
it should be better to check the return value of the
setup_interrupts() and return error if fails.
Fixes: 68b4aee35d1f ("memory: emif: add interrupt and temperature handling")
Signed-off-by: Jiasheng Jiang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/memory/emif.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/memory/emif.c b/drivers/memory/emif.c
index ddb1879f07d3..55d4c842fcd9 100644
--- a/drivers/memory/emif.c
+++ b/drivers/memory/emif.c
@@ -1495,7 +1495,7 @@ static int __init_or_module emif_probe(struct platform_device *pdev)
{
struct emif_data *emif;
struct resource *res;
- int irq;
+ int irq, ret;
if (pdev->dev.of_node)
emif = of_get_memory_device_details(pdev->dev.of_node, &pdev->dev);
@@ -1526,7 +1526,9 @@ static int __init_or_module emif_probe(struct platform_device *pdev)
emif_onetime_settings(emif);
emif_debugfs_init(emif);
disable_and_clear_all_interrupts(emif);
- setup_interrupts(emif, irq);
+ ret = setup_interrupts(emif, irq);
+ if (ret)
+ goto error;
/* One-time actions taken on probing the first device */
if (!emif1) {
--
2.34.1
From: Ritesh Harjani <[email protected]>
[ Upstream commit a5c0e2fdf7cea535ba03259894dc184e5a4c2800 ]
ext4_mb_mark_bb() currently wrongly calculates cluster len (clen) and
flex_group->free_clusters. This patch fixes that.
Identified based on code review of ext4_mb_mark_bb() function.
Signed-off-by: Ritesh Harjani <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Link: https://lore.kernel.org/r/a0b035d536bafa88110b74456853774b64c8ac40.1644992609.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/ext4/mballoc.c | 19 ++++++++++++-------
1 file changed, 12 insertions(+), 7 deletions(-)
diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c
index 110c25824a67..41a115c53bf6 100644
--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -3320,10 +3320,11 @@ void ext4_mb_mark_bb(struct super_block *sb, ext4_fsblk_t block,
struct ext4_sb_info *sbi = EXT4_SB(sb);
ext4_group_t group;
ext4_grpblk_t blkoff;
- int i, clen, err;
+ int i, err;
int already;
+ unsigned int clen, clen_changed;
- clen = EXT4_B2C(sbi, len);
+ clen = EXT4_NUM_B2C(sbi, len);
ext4_get_group_no_and_offset(sb, block, &group, &blkoff);
bitmap_bh = ext4_read_block_bitmap(sb, group);
@@ -3344,6 +3345,7 @@ void ext4_mb_mark_bb(struct super_block *sb, ext4_fsblk_t block,
if (!mb_test_bit(blkoff + i, bitmap_bh->b_data) == !state)
already++;
+ clen_changed = clen - already;
if (state)
ext4_set_bits(bitmap_bh->b_data, blkoff, clen);
else
@@ -3356,9 +3358,9 @@ void ext4_mb_mark_bb(struct super_block *sb, ext4_fsblk_t block,
group, gdp));
}
if (state)
- clen = ext4_free_group_clusters(sb, gdp) - clen + already;
+ clen = ext4_free_group_clusters(sb, gdp) - clen_changed;
else
- clen = ext4_free_group_clusters(sb, gdp) + clen - already;
+ clen = ext4_free_group_clusters(sb, gdp) + clen_changed;
ext4_free_group_clusters_set(sb, gdp, clen);
ext4_block_bitmap_csum_set(sb, group, gdp, bitmap_bh);
@@ -3368,10 +3370,13 @@ void ext4_mb_mark_bb(struct super_block *sb, ext4_fsblk_t block,
if (sbi->s_log_groups_per_flex) {
ext4_group_t flex_group = ext4_flex_group(sbi, group);
+ struct flex_groups *fg = sbi_array_rcu_deref(sbi,
+ s_flex_groups, flex_group);
- atomic64_sub(len,
- &sbi_array_rcu_deref(sbi, s_flex_groups,
- flex_group)->free_clusters);
+ if (state)
+ atomic64_sub(clen_changed, &fg->free_clusters);
+ else
+ atomic64_add(clen_changed, &fg->free_clusters);
}
err = ext4_handle_dirty_metadata(NULL, NULL, bitmap_bh);
--
2.34.1
From: Martin Blumenstingl <[email protected]>
[ Upstream commit 04b8a5d9cfd171f65df75f444b5617a372649edd ]
Use this to simplify the driver shutdown. It will also come handy when
fixing the error handling in meson_drv_bind_master().
Signed-off-by: Martin Blumenstingl <[email protected]>
Fixes: d1b5e41e13a7e9 ("drm/meson: Add AFBCD module driver")
Acked-by: Neil Armstrong <[email protected]>
Signed-off-by: Neil Armstrong <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/meson/meson_drv.c | 6 ++--
drivers/gpu/drm/meson/meson_osd_afbcd.c | 41 ++++++++++++++++---------
drivers/gpu/drm/meson/meson_osd_afbcd.h | 1 +
3 files changed, 30 insertions(+), 18 deletions(-)
diff --git a/drivers/gpu/drm/meson/meson_drv.c b/drivers/gpu/drm/meson/meson_drv.c
index 2753067c08e6..728fea509412 100644
--- a/drivers/gpu/drm/meson/meson_drv.c
+++ b/drivers/gpu/drm/meson/meson_drv.c
@@ -396,10 +396,8 @@ static void meson_drv_unbind(struct device *dev)
drm_irq_uninstall(drm);
drm_dev_put(drm);
- if (priv->afbcd.ops) {
- priv->afbcd.ops->reset(priv);
- meson_rdma_free(priv);
- }
+ if (priv->afbcd.ops)
+ priv->afbcd.ops->exit(priv);
}
static const struct component_master_ops meson_drv_master_ops = {
diff --git a/drivers/gpu/drm/meson/meson_osd_afbcd.c b/drivers/gpu/drm/meson/meson_osd_afbcd.c
index ffc6b584dbf8..0cdbe899402f 100644
--- a/drivers/gpu/drm/meson/meson_osd_afbcd.c
+++ b/drivers/gpu/drm/meson/meson_osd_afbcd.c
@@ -79,11 +79,6 @@ static bool meson_gxm_afbcd_supported_fmt(u64 modifier, uint32_t format)
return meson_gxm_afbcd_pixel_fmt(modifier, format) >= 0;
}
-static int meson_gxm_afbcd_init(struct meson_drm *priv)
-{
- return 0;
-}
-
static int meson_gxm_afbcd_reset(struct meson_drm *priv)
{
writel_relaxed(VIU_SW_RESET_OSD1_AFBCD,
@@ -93,6 +88,16 @@ static int meson_gxm_afbcd_reset(struct meson_drm *priv)
return 0;
}
+static int meson_gxm_afbcd_init(struct meson_drm *priv)
+{
+ return 0;
+}
+
+static void meson_gxm_afbcd_exit(struct meson_drm *priv)
+{
+ meson_gxm_afbcd_reset(priv);
+}
+
static int meson_gxm_afbcd_enable(struct meson_drm *priv)
{
writel_relaxed(FIELD_PREP(OSD1_AFBCD_ID_FIFO_THRD, 0x40) |
@@ -172,6 +177,7 @@ static int meson_gxm_afbcd_setup(struct meson_drm *priv)
struct meson_afbcd_ops meson_afbcd_gxm_ops = {
.init = meson_gxm_afbcd_init,
+ .exit = meson_gxm_afbcd_exit,
.reset = meson_gxm_afbcd_reset,
.enable = meson_gxm_afbcd_enable,
.disable = meson_gxm_afbcd_disable,
@@ -269,6 +275,18 @@ static bool meson_g12a_afbcd_supported_fmt(u64 modifier, uint32_t format)
return meson_g12a_afbcd_pixel_fmt(modifier, format) >= 0;
}
+static int meson_g12a_afbcd_reset(struct meson_drm *priv)
+{
+ meson_rdma_reset(priv);
+
+ meson_rdma_writel_sync(priv, VIU_SW_RESET_G12A_AFBC_ARB |
+ VIU_SW_RESET_G12A_OSD1_AFBCD,
+ VIU_SW_RESET);
+ meson_rdma_writel_sync(priv, 0, VIU_SW_RESET);
+
+ return 0;
+}
+
static int meson_g12a_afbcd_init(struct meson_drm *priv)
{
int ret;
@@ -286,16 +304,10 @@ static int meson_g12a_afbcd_init(struct meson_drm *priv)
return 0;
}
-static int meson_g12a_afbcd_reset(struct meson_drm *priv)
+static void meson_g12a_afbcd_exit(struct meson_drm *priv)
{
- meson_rdma_reset(priv);
-
- meson_rdma_writel_sync(priv, VIU_SW_RESET_G12A_AFBC_ARB |
- VIU_SW_RESET_G12A_OSD1_AFBCD,
- VIU_SW_RESET);
- meson_rdma_writel_sync(priv, 0, VIU_SW_RESET);
-
- return 0;
+ meson_g12a_afbcd_reset(priv);
+ meson_rdma_free(priv);
}
static int meson_g12a_afbcd_enable(struct meson_drm *priv)
@@ -380,6 +392,7 @@ static int meson_g12a_afbcd_setup(struct meson_drm *priv)
struct meson_afbcd_ops meson_afbcd_g12a_ops = {
.init = meson_g12a_afbcd_init,
+ .exit = meson_g12a_afbcd_exit,
.reset = meson_g12a_afbcd_reset,
.enable = meson_g12a_afbcd_enable,
.disable = meson_g12a_afbcd_disable,
diff --git a/drivers/gpu/drm/meson/meson_osd_afbcd.h b/drivers/gpu/drm/meson/meson_osd_afbcd.h
index 5e5523304f42..e77ddeb6416f 100644
--- a/drivers/gpu/drm/meson/meson_osd_afbcd.h
+++ b/drivers/gpu/drm/meson/meson_osd_afbcd.h
@@ -14,6 +14,7 @@
struct meson_afbcd_ops {
int (*init)(struct meson_drm *priv);
+ void (*exit)(struct meson_drm *priv);
int (*reset)(struct meson_drm *priv);
int (*enable)(struct meson_drm *priv);
int (*disable)(struct meson_drm *priv);
--
2.34.1
From: Juergen Gross <[email protected]>
[ Upstream commit de2ae403b4c0e79a3410e63bc448542fbb9f9bfc ]
is_xen_pmu() is taking the cpu number as parameter, but it is not using
it. Instead it just tests whether the Xen PMU initialization on the
current cpu did succeed. As this test is done by checking a percpu
pointer, preemption needs to be disabled in order to avoid switching
the cpu while doing the test. While resuming from suspend() this seems
not to be the case:
[ 88.082751] ACPI: PM: Low-level resume complete
[ 88.087933] ACPI: EC: EC started
[ 88.091464] ACPI: PM: Restoring platform NVS memory
[ 88.097166] xen_acpi_processor: Uploading Xen processor PM info
[ 88.103850] Enabling non-boot CPUs ...
[ 88.108128] installing Xen timer for CPU 1
[ 88.112763] BUG: using smp_processor_id() in preemptible [00000000] code: systemd-sleep/7138
[ 88.122256] caller is is_xen_pmu+0x12/0x30
[ 88.126937] CPU: 0 PID: 7138 Comm: systemd-sleep Tainted: G W 5.16.13-2.fc32.qubes.x86_64 #1
[ 88.137939] Hardware name: Star Labs StarBook/StarBook, BIOS 7.97 03/21/2022
[ 88.145930] Call Trace:
[ 88.148757] <TASK>
[ 88.151193] dump_stack_lvl+0x48/0x5e
[ 88.155381] check_preemption_disabled+0xde/0xe0
[ 88.160641] is_xen_pmu+0x12/0x30
[ 88.164441] xen_smp_intr_init_pv+0x75/0x100
Fix that by replacing is_xen_pmu() by a simple boolean variable which
reflects the Xen PMU initialization state on cpu 0.
Modify xen_pmu_init() to return early in case it is being called for a
cpu other than cpu 0 and the boolean variable not being set.
Fixes: bf6dfb154d93 ("xen/PMU: PMU emulation code")
Reported-by: Marek Marczykowski-Górecki <[email protected]>
Signed-off-by: Juergen Gross <[email protected]>
Reviewed-by: Boris Ostrovsky <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Boris Ostrovsky <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/xen/pmu.c | 10 ++++------
arch/x86/xen/pmu.h | 3 ++-
arch/x86/xen/smp_pv.c | 2 +-
3 files changed, 7 insertions(+), 8 deletions(-)
diff --git a/arch/x86/xen/pmu.c b/arch/x86/xen/pmu.c
index e13b0b49fcdf..d7249f4c90f1 100644
--- a/arch/x86/xen/pmu.c
+++ b/arch/x86/xen/pmu.c
@@ -512,10 +512,7 @@ irqreturn_t xen_pmu_irq_handler(int irq, void *dev_id)
return ret;
}
-bool is_xen_pmu(int cpu)
-{
- return (get_xenpmu_data() != NULL);
-}
+bool is_xen_pmu;
void xen_pmu_init(int cpu)
{
@@ -526,7 +523,7 @@ void xen_pmu_init(int cpu)
BUILD_BUG_ON(sizeof(struct xen_pmu_data) > PAGE_SIZE);
- if (xen_hvm_domain())
+ if (xen_hvm_domain() || (cpu != 0 && !is_xen_pmu))
return;
xenpmu_data = (struct xen_pmu_data *)get_zeroed_page(GFP_KERNEL);
@@ -547,7 +544,8 @@ void xen_pmu_init(int cpu)
per_cpu(xenpmu_shared, cpu).xenpmu_data = xenpmu_data;
per_cpu(xenpmu_shared, cpu).flags = 0;
- if (cpu == 0) {
+ if (!is_xen_pmu) {
+ is_xen_pmu = true;
perf_register_guest_info_callbacks(&xen_guest_cbs);
xen_pmu_arch_init();
}
diff --git a/arch/x86/xen/pmu.h b/arch/x86/xen/pmu.h
index 0e83a160589b..65c58894fc79 100644
--- a/arch/x86/xen/pmu.h
+++ b/arch/x86/xen/pmu.h
@@ -4,6 +4,8 @@
#include <xen/interface/xenpmu.h>
+extern bool is_xen_pmu;
+
irqreturn_t xen_pmu_irq_handler(int irq, void *dev_id);
#ifdef CONFIG_XEN_HAVE_VPMU
void xen_pmu_init(int cpu);
@@ -12,7 +14,6 @@ void xen_pmu_finish(int cpu);
static inline void xen_pmu_init(int cpu) {}
static inline void xen_pmu_finish(int cpu) {}
#endif
-bool is_xen_pmu(int cpu);
bool pmu_msr_read(unsigned int msr, uint64_t *val, int *err);
bool pmu_msr_write(unsigned int msr, uint32_t low, uint32_t high, int *err);
int pmu_apic_update(uint32_t reg);
diff --git a/arch/x86/xen/smp_pv.c b/arch/x86/xen/smp_pv.c
index 8f9e7e2407c8..35b6d15d874d 100644
--- a/arch/x86/xen/smp_pv.c
+++ b/arch/x86/xen/smp_pv.c
@@ -130,7 +130,7 @@ int xen_smp_intr_init_pv(unsigned int cpu)
per_cpu(xen_irq_work, cpu).irq = rc;
per_cpu(xen_irq_work, cpu).name = callfunc_name;
- if (is_xen_pmu(cpu)) {
+ if (is_xen_pmu) {
pmu_name = kasprintf(GFP_KERNEL, "pmu%d", cpu);
rc = bind_virq_to_irqhandler(VIRQ_XENPMU, cpu,
xen_pmu_irq_handler,
--
2.34.1
From: Eric Dumazet <[email protected]>
commit b490207017ba237d97b735b2aa66dc241ccd18f5 upstream.
Commit 7ea1a0124b6d ("watch_queue: Free the alloc bitmap when the
watch_queue is torn down") took care of the bitmap, but not the page
array.
BUG: memory leak
unreferenced object 0xffff88810d9bc140 (size 32):
comm "syz-executor335", pid 3603, jiffies 4294946994 (age 12.840s)
hex dump (first 32 bytes):
40 a7 40 04 00 ea ff ff 00 00 00 00 00 00 00 00 @.@.............
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
kmalloc_array include/linux/slab.h:621 [inline]
kcalloc include/linux/slab.h:652 [inline]
watch_queue_set_size+0x12f/0x2e0 kernel/watch_queue.c:251
pipe_ioctl+0x82/0x140 fs/pipe.c:632
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:874 [inline]
__se_sys_ioctl fs/ioctl.c:860 [inline]
__x64_sys_ioctl+0xfc/0x140 fs/ioctl.c:860
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
Reported-by: [email protected]
Fixes: c73be61cede5 ("pipe: Add general notification queue support")
Signed-off-by: Eric Dumazet <[email protected]>
Signed-off-by: David Howells <[email protected]>
Cc: Jann Horn <[email protected]>
Link: https://lore.kernel.org/r/[email protected]/
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/watch_queue.c | 1 +
1 file changed, 1 insertion(+)
--- a/kernel/watch_queue.c
+++ b/kernel/watch_queue.c
@@ -373,6 +373,7 @@ static void __put_watch_queue(struct kre
for (i = 0; i < wqueue->nr_pages; i++)
__free_page(wqueue->notes[i]);
+ kfree(wqueue->notes);
bitmap_free(wqueue->notes_bitmap);
wfilter = rcu_access_pointer(wqueue->filter);
From: Dmitry Baryshkov <[email protected]>
[ Upstream commit 524bb1da785a7ae43dd413cd392b5071c6c367f8 ]
The function device_pm_check_callbacks() can be called under the spin
lock (in the reported case it happens from genpd_add_device() ->
dev_pm_domain_set(), when the genpd uses spinlocks rather than mutexes.
However this function uncoditionally uses spin_lock_irq() /
spin_unlock_irq(), thus not preserving the CPU flags. Use the
irqsave/irqrestore instead.
The backtrace for the reference:
[ 2.752010] ------------[ cut here ]------------
[ 2.756769] raw_local_irq_restore() called with IRQs enabled
[ 2.762596] WARNING: CPU: 4 PID: 1 at kernel/locking/irqflag-debug.c:10 warn_bogus_irq_restore+0x34/0x50
[ 2.772338] Modules linked in:
[ 2.775487] CPU: 4 PID: 1 Comm: swapper/0 Tainted: G S 5.17.0-rc6-00384-ge330d0d82eff-dirty #684
[ 2.781384] Freeing initrd memory: 46024K
[ 2.785839] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 2.785841] pc : warn_bogus_irq_restore+0x34/0x50
[ 2.785844] lr : warn_bogus_irq_restore+0x34/0x50
[ 2.785846] sp : ffff80000805b7d0
[ 2.785847] x29: ffff80000805b7d0 x28: 0000000000000000 x27: 0000000000000002
[ 2.785850] x26: ffffd40e80930b18 x25: ffff7ee2329192b8 x24: ffff7edfc9f60800
[ 2.785853] x23: ffffd40e80930b18 x22: ffffd40e80930d30 x21: ffff7edfc0dffa00
[ 2.785856] x20: ffff7edfc09e3768 x19: 0000000000000000 x18: ffffffffffffffff
[ 2.845775] x17: 6572206f74206465 x16: 6c696166203a3030 x15: ffff80008805b4f7
[ 2.853108] x14: 0000000000000000 x13: ffffd40e809550b0 x12: 00000000000003d8
[ 2.860441] x11: 0000000000000148 x10: ffffd40e809550b0 x9 : ffffd40e809550b0
[ 2.867774] x8 : 00000000ffffefff x7 : ffffd40e809ad0b0 x6 : ffffd40e809ad0b0
[ 2.875107] x5 : 000000000000bff4 x4 : 0000000000000000 x3 : 0000000000000000
[ 2.882440] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff7edfc03a8000
[ 2.889774] Call trace:
[ 2.892290] warn_bogus_irq_restore+0x34/0x50
[ 2.896770] _raw_spin_unlock_irqrestore+0x94/0xa0
[ 2.901690] genpd_unlock_spin+0x20/0x30
[ 2.905724] genpd_add_device+0x100/0x2d0
[ 2.909850] __genpd_dev_pm_attach+0xa8/0x23c
[ 2.914329] genpd_dev_pm_attach_by_id+0xc4/0x190
[ 2.919167] genpd_dev_pm_attach_by_name+0x3c/0xd0
[ 2.924086] dev_pm_domain_attach_by_name+0x24/0x30
[ 2.929102] psci_dt_attach_cpu+0x24/0x90
[ 2.933230] psci_cpuidle_probe+0x2d4/0x46c
[ 2.937534] platform_probe+0x68/0xe0
[ 2.941304] really_probe.part.0+0x9c/0x2fc
[ 2.945605] __driver_probe_device+0x98/0x144
[ 2.950085] driver_probe_device+0x44/0x15c
[ 2.954385] __device_attach_driver+0xb8/0x120
[ 2.958950] bus_for_each_drv+0x78/0xd0
[ 2.962896] __device_attach+0xd8/0x180
[ 2.966843] device_initial_probe+0x14/0x20
[ 2.971144] bus_probe_device+0x9c/0xa4
[ 2.975092] device_add+0x380/0x88c
[ 2.978679] platform_device_add+0x114/0x234
[ 2.983067] platform_device_register_full+0x100/0x190
[ 2.988344] psci_idle_init+0x6c/0xb0
[ 2.992113] do_one_initcall+0x74/0x3a0
[ 2.996060] kernel_init_freeable+0x2fc/0x384
[ 3.000543] kernel_init+0x28/0x130
[ 3.004132] ret_from_fork+0x10/0x20
[ 3.007817] irq event stamp: 319826
[ 3.011404] hardirqs last enabled at (319825): [<ffffd40e7eda0268>] __up_console_sem+0x78/0x84
[ 3.020332] hardirqs last disabled at (319826): [<ffffd40e7fd6d9d8>] el1_dbg+0x24/0x8c
[ 3.028458] softirqs last enabled at (318312): [<ffffd40e7ec90410>] _stext+0x410/0x588
[ 3.036678] softirqs last disabled at (318299): [<ffffd40e7ed1bf68>] __irq_exit_rcu+0x158/0x174
[ 3.045607] ---[ end trace 0000000000000000 ]---
Signed-off-by: Dmitry Baryshkov <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/base/power/main.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c
index 4167e2aef397..1dbaaddf540e 100644
--- a/drivers/base/power/main.c
+++ b/drivers/base/power/main.c
@@ -1994,7 +1994,9 @@ static bool pm_ops_is_empty(const struct dev_pm_ops *ops)
void device_pm_check_callbacks(struct device *dev)
{
- spin_lock_irq(&dev->power.lock);
+ unsigned long flags;
+
+ spin_lock_irqsave(&dev->power.lock, flags);
dev->power.no_pm_callbacks =
(!dev->bus || (pm_ops_is_empty(dev->bus->pm) &&
!dev->bus->suspend && !dev->bus->resume)) &&
@@ -2003,7 +2005,7 @@ void device_pm_check_callbacks(struct device *dev)
(!dev->pm_domain || pm_ops_is_empty(&dev->pm_domain->ops)) &&
(!dev->driver || (pm_ops_is_empty(dev->driver->pm) &&
!dev->driver->suspend && !dev->driver->resume));
- spin_unlock_irq(&dev->power.lock);
+ spin_unlock_irqrestore(&dev->power.lock, flags);
}
bool dev_pm_skip_suspend(struct device *dev)
--
2.34.1
From: Jiasheng Jiang <[email protected]>
[ Upstream commit 09e7af76db02c74f2a339b3cb2d95460fa2ddbe4 ]
As the potential failure of the clk_enable(),
it should be better to check it and return error
if fails.
Fixes: bbce5802afc5 ("davinci: mmc: updates to suspend/resume implementation")
Signed-off-by: Jiasheng Jiang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mmc/host/davinci_mmc.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/host/davinci_mmc.c b/drivers/mmc/host/davinci_mmc.c
index 90cd179625fc..647928ab00a3 100644
--- a/drivers/mmc/host/davinci_mmc.c
+++ b/drivers/mmc/host/davinci_mmc.c
@@ -1375,8 +1375,12 @@ static int davinci_mmcsd_suspend(struct device *dev)
static int davinci_mmcsd_resume(struct device *dev)
{
struct mmc_davinci_host *host = dev_get_drvdata(dev);
+ int ret;
+
+ ret = clk_enable(host->clk);
+ if (ret)
+ return ret;
- clk_enable(host->clk);
mmc_davinci_reset_ctrl(host, 0);
return 0;
--
2.34.1
From: Brandon Wyman <[email protected]>
[ Upstream commit a5436af598779219b375c1977555c82def1c35d0 ]
If there is an input undervoltage fault, reported in STATUS_INPUT
command response, there is quite likely a "Unit Off For Insufficient
Input Voltage" condition as well.
Add a constant for bit 3 of STATUS_INPUT. Update the Vin limit
attributes to include both bits in the mask for clearing faults.
If an input undervoltage fault occurs, causing a unit off for
insufficient input voltage, but the unit is off bit is not cleared, the
STATUS_WORD will not be updated to clear the input fault condition.
Including the unit is off bit (bit 3) allows for the input fault
condition to completely clear.
Signed-off-by: Brandon Wyman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Fixes: b4ce237b7f7d3 ("hwmon: (pmbus) Introduce infrastructure to detect sensors and limit registers")
[groeck: Dropped unnecessary ()]
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hwmon/pmbus/pmbus.h | 1 +
drivers/hwmon/pmbus/pmbus_core.c | 2 +-
2 files changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/hwmon/pmbus/pmbus.h b/drivers/hwmon/pmbus/pmbus.h
index 88a5df2633fb..de27837e8527 100644
--- a/drivers/hwmon/pmbus/pmbus.h
+++ b/drivers/hwmon/pmbus/pmbus.h
@@ -319,6 +319,7 @@ enum pmbus_fan_mode { percent = 0, rpm };
/*
* STATUS_VOUT, STATUS_INPUT
*/
+#define PB_VOLTAGE_VIN_OFF BIT(3)
#define PB_VOLTAGE_UV_FAULT BIT(4)
#define PB_VOLTAGE_UV_WARNING BIT(5)
#define PB_VOLTAGE_OV_WARNING BIT(6)
diff --git a/drivers/hwmon/pmbus/pmbus_core.c b/drivers/hwmon/pmbus/pmbus_core.c
index 7a13057007d9..117e3ce9c76a 100644
--- a/drivers/hwmon/pmbus/pmbus_core.c
+++ b/drivers/hwmon/pmbus/pmbus_core.c
@@ -1360,7 +1360,7 @@ static const struct pmbus_limit_attr vin_limit_attrs[] = {
.reg = PMBUS_VIN_UV_FAULT_LIMIT,
.attr = "lcrit",
.alarm = "lcrit_alarm",
- .sbit = PB_VOLTAGE_UV_FAULT,
+ .sbit = PB_VOLTAGE_UV_FAULT | PB_VOLTAGE_VIN_OFF,
}, {
.reg = PMBUS_VIN_OV_WARN_LIMIT,
.attr = "max",
--
2.34.1
From: Ard Biesheuvel <[email protected]>
[ Upstream commit dd88b03ff0c84f4bcbe1419b93a4bed429fed3be ]
Using ADR to take the address of 'ftrace_stub' via a local label
produces an address that has the Thumb bit cleared, which means the
subsequent comparison is guaranteed to fail. Instead, use the badr
macro, which forces the Thumb bit to be set.
Fixes: a3ba87a61499 ("ARM: 6316/1: ftrace: add Thumb-2 support")
Signed-off-by: Ard Biesheuvel <[email protected]>
Reviewed-by: Nick Desaulniers <[email protected]>
Reviewed-by: Steven Rostedt (Google) <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/kernel/entry-ftrace.S | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/kernel/entry-ftrace.S b/arch/arm/kernel/entry-ftrace.S
index a74289ebc803..f4886fb6e9ba 100644
--- a/arch/arm/kernel/entry-ftrace.S
+++ b/arch/arm/kernel/entry-ftrace.S
@@ -40,7 +40,7 @@
mcount_enter
ldr r0, =ftrace_trace_function
ldr r2, [r0]
- adr r0, .Lftrace_stub
+ badr r0, .Lftrace_stub
cmp r0, r2
bne 1f
--
2.34.1
From: Waiman Long <[email protected]>
commit 61cc4534b6550997c97a03759ab46b29d44c0017 upstream.
It was found that reading /proc/lockdep after a lockdep splat may
potentially cause an access to freed memory if lockdep_unregister_key()
is called after the splat but before access to /proc/lockdep [1]. This
is due to the fact that graph_lock() call in lockdep_unregister_key()
fails after the clearing of debug_locks by the splat process.
After lockdep_unregister_key() is called, the lock_name may be freed
but the corresponding lock_class structure still have a reference to
it. That invalid memory pointer will then be accessed when /proc/lockdep
is read by a user and a use-after-free (UAF) error will be reported if
KASAN is enabled.
To fix this problem, lockdep_unregister_key() is now modified to always
search for a matching key irrespective of the debug_locks state and
zap the corresponding lock class if a matching one is found.
[1] https://lore.kernel.org/lkml/[email protected]/
Fixes: 8b39adbee805 ("locking/lockdep: Make lockdep_unregister_key() honor 'debug_locks' again")
Reported-by: Tetsuo Handa <[email protected]>
Signed-off-by: Waiman Long <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Bart Van Assche <[email protected]>
Cc: Cheng-Jui Wang <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/locking/lockdep.c | 24 +++++++++++++++---------
1 file changed, 15 insertions(+), 9 deletions(-)
--- a/kernel/locking/lockdep.c
+++ b/kernel/locking/lockdep.c
@@ -6209,7 +6209,13 @@ void lockdep_reset_lock(struct lockdep_m
lockdep_reset_lock_reg(lock);
}
-/* Unregister a dynamically allocated key. */
+/*
+ * Unregister a dynamically allocated key.
+ *
+ * Unlike lockdep_register_key(), a search is always done to find a matching
+ * key irrespective of debug_locks to avoid potential invalid access to freed
+ * memory in lock_class entry.
+ */
void lockdep_unregister_key(struct lock_class_key *key)
{
struct hlist_head *hash_head = keyhashentry(key);
@@ -6224,10 +6230,8 @@ void lockdep_unregister_key(struct lock_
return;
raw_local_irq_save(flags);
- if (!graph_lock())
- goto out_irq;
+ lockdep_lock();
- pf = get_pending_free();
hlist_for_each_entry_rcu(k, hash_head, hash_entry) {
if (k == key) {
hlist_del_rcu(&k->hash_entry);
@@ -6235,11 +6239,13 @@ void lockdep_unregister_key(struct lock_
break;
}
}
- WARN_ON_ONCE(!found);
- __lockdep_free_key_range(pf, key, 1);
- call_rcu_zapped(pf);
- graph_unlock();
-out_irq:
+ WARN_ON_ONCE(!found && debug_locks);
+ if (found) {
+ pf = get_pending_free();
+ __lockdep_free_key_range(pf, key, 1);
+ call_rcu_zapped(pf);
+ }
+ lockdep_unlock();
raw_local_irq_restore(flags);
/* Wait until is_dynamic_key() has finished accessing k->hash_entry. */
From: Kunihiko Hayashi <[email protected]>
commit ca85a66710a8a1f6b0719397225c3e9ee0abb692 upstream.
Fixed-rate clocks in UniPhier don't have any parent clocks, however,
initial data "init.flags" isn't initialized, so it might be determined
that there is a parent clock for fixed-rate clock.
This sets init.flags to zero as initialization.
Cc: <[email protected]>
Fixes: 734d82f4a678 ("clk: uniphier: add core support code for UniPhier clock driver")
Signed-off-by: Kunihiko Hayashi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/clk/uniphier/clk-uniphier-fixed-rate.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/clk/uniphier/clk-uniphier-fixed-rate.c
+++ b/drivers/clk/uniphier/clk-uniphier-fixed-rate.c
@@ -24,6 +24,7 @@ struct clk_hw *uniphier_clk_register_fix
init.name = name;
init.ops = &clk_fixed_rate_ops;
+ init.flags = 0;
init.parent_names = NULL;
init.num_parents = 0;
From: Zhihao Cheng <[email protected]>
commit 1b83ec057db16b4d0697dc21ef7a9743b6041f72 upstream.
Make 'ui->data_len' aligned with 8 bytes before it is assigned to
dirtied_ino_d. Since 8871d84c8f8b0c6b("ubifs: convert to fileattr")
applied, 'setflags()' only affects regular files and directories, only
xattr inode, symlink inode and special inode(pipe/char_dev/block_dev)
have none- zero 'ui->data_len' field, so assertion
'!(req->dirtied_ino_d & 7)' cannot fail in ubifs_budget_space().
To avoid assertion fails in future evolution(eg. setflags can operate
special inodes), it's better to make dirtied_ino_d 8 bytes aligned,
after all aligned size is still zero for regular files.
Fixes: 1e51764a3c2ac05a ("UBIFS: add new flash file system")
Signed-off-by: Zhihao Cheng <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ubifs/ioctl.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/ubifs/ioctl.c
+++ b/fs/ubifs/ioctl.c
@@ -107,7 +107,7 @@ static int setflags(struct inode *inode,
struct ubifs_inode *ui = ubifs_inode(inode);
struct ubifs_info *c = inode->i_sb->s_fs_info;
struct ubifs_budget_req req = { .dirtied_ino = 1,
- .dirtied_ino_d = ui->data_len };
+ .dirtied_ino_d = ALIGN(ui->data_len, 8) };
err = ubifs_budget_space(c, &req);
if (err)
From: Maulik Shah <[email protected]>
[ Upstream commit 17ac8af678b6da6a8f1df7da8ebf2c5198741827 ]
Correct the TCS config by updating the number of TCSes for each type.
Cc: [email protected]
Fixes: d8cf9372b654 ("arm64: dts: qcom: sm8150: Add apps shared nodes")
Signed-off-by: Maulik Shah <[email protected]>
Signed-off-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/qcom/sm8150.dtsi | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index 1aec54590a11..a8a47378ba68 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -1114,9 +1114,9 @@
qcom,tcs-offset = <0xd00>;
qcom,drv-id = <2>;
qcom,tcs-config = <ACTIVE_TCS 2>,
- <SLEEP_TCS 1>,
- <WAKE_TCS 1>,
- <CONTROL_TCS 0>;
+ <SLEEP_TCS 3>,
+ <WAKE_TCS 3>,
+ <CONTROL_TCS 1>;
rpmhcc: clock-controller {
compatible = "qcom,sm8150-rpmh-clk";
--
2.34.1
From: Gwendal Grignou <[email protected]>
commit eabd9a3807e17e211690e6c40f1405b427b64c48 upstream.
cros_ec_trace.h defined 5 tracing events, 2 for cros_ec_proto and
3 for cros_ec_sensorhub_ring.
These 2 files are in different kernel modules, the traces are defined
twice in the kernel which leads to problem enabling only some traces.
Move sensorhub traces from cros_ec_trace.h to cros_ec_sensorhub_trace.h
and enable them only in cros_ec_sensorhub kernel module.
Check we can now enable any single traces: without this patch,
we can only enable all sensorhub traces or none.
Fixes: d453ceb6549a ("platform/chrome: sensorhub: Add trace events for sample")
Signed-off-by: Gwendal Grignou <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Benson Leung <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/platform/chrome/Makefile | 3
drivers/platform/chrome/cros_ec_sensorhub_ring.c | 3
drivers/platform/chrome/cros_ec_sensorhub_trace.h | 123 ++++++++++++++++++++++
drivers/platform/chrome/cros_ec_trace.h | 95 ----------------
4 files changed, 127 insertions(+), 97 deletions(-)
create mode 100644 drivers/platform/chrome/cros_ec_sensorhub_trace.h
--- a/drivers/platform/chrome/Makefile
+++ b/drivers/platform/chrome/Makefile
@@ -2,6 +2,7 @@
# tell define_trace.h where to find the cros ec trace header
CFLAGS_cros_ec_trace.o:= -I$(src)
+CFLAGS_cros_ec_sensorhub_ring.o:= -I$(src)
obj-$(CONFIG_CHROMEOS_LAPTOP) += chromeos_laptop.o
obj-$(CONFIG_CHROMEOS_PSTORE) += chromeos_pstore.o
@@ -20,7 +21,7 @@ obj-$(CONFIG_CROS_EC_CHARDEV) += cros_e
obj-$(CONFIG_CROS_EC_LIGHTBAR) += cros_ec_lightbar.o
obj-$(CONFIG_CROS_EC_VBC) += cros_ec_vbc.o
obj-$(CONFIG_CROS_EC_DEBUGFS) += cros_ec_debugfs.o
-cros-ec-sensorhub-objs := cros_ec_sensorhub.o cros_ec_sensorhub_ring.o cros_ec_trace.o
+cros-ec-sensorhub-objs := cros_ec_sensorhub.o cros_ec_sensorhub_ring.o
obj-$(CONFIG_CROS_EC_SENSORHUB) += cros-ec-sensorhub.o
obj-$(CONFIG_CROS_EC_SYSFS) += cros_ec_sysfs.o
obj-$(CONFIG_CROS_USBPD_LOGGER) += cros_usbpd_logger.o
--- a/drivers/platform/chrome/cros_ec_sensorhub_ring.c
+++ b/drivers/platform/chrome/cros_ec_sensorhub_ring.c
@@ -17,7 +17,8 @@
#include <linux/sort.h>
#include <linux/slab.h>
-#include "cros_ec_trace.h"
+#define CREATE_TRACE_POINTS
+#include "cros_ec_sensorhub_trace.h"
/* Precision of fixed point for the m values from the filter */
#define M_PRECISION BIT(23)
--- /dev/null
+++ b/drivers/platform/chrome/cros_ec_sensorhub_trace.h
@@ -0,0 +1,123 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Trace events for the ChromeOS Sensorhub kernel module
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM cros_ec
+
+#if !defined(_CROS_EC_SENSORHUB_TRACE_H_) || defined(TRACE_HEADER_MULTI_READ)
+#define _CROS_EC_SENSORHUB_TRACE_H_
+
+#include <linux/types.h>
+#include <linux/platform_data/cros_ec_sensorhub.h>
+
+#include <linux/tracepoint.h>
+
+TRACE_EVENT(cros_ec_sensorhub_timestamp,
+ TP_PROTO(u32 ec_sample_timestamp, u32 ec_fifo_timestamp, s64 fifo_timestamp,
+ s64 current_timestamp, s64 current_time),
+ TP_ARGS(ec_sample_timestamp, ec_fifo_timestamp, fifo_timestamp, current_timestamp,
+ current_time),
+ TP_STRUCT__entry(
+ __field(u32, ec_sample_timestamp)
+ __field(u32, ec_fifo_timestamp)
+ __field(s64, fifo_timestamp)
+ __field(s64, current_timestamp)
+ __field(s64, current_time)
+ __field(s64, delta)
+ ),
+ TP_fast_assign(
+ __entry->ec_sample_timestamp = ec_sample_timestamp;
+ __entry->ec_fifo_timestamp = ec_fifo_timestamp;
+ __entry->fifo_timestamp = fifo_timestamp;
+ __entry->current_timestamp = current_timestamp;
+ __entry->current_time = current_time;
+ __entry->delta = current_timestamp - current_time;
+ ),
+ TP_printk("ec_ts: %9u, ec_fifo_ts: %9u, fifo_ts: %12lld, curr_ts: %12lld, curr_time: %12lld, delta %12lld",
+ __entry->ec_sample_timestamp,
+ __entry->ec_fifo_timestamp,
+ __entry->fifo_timestamp,
+ __entry->current_timestamp,
+ __entry->current_time,
+ __entry->delta
+ )
+);
+
+TRACE_EVENT(cros_ec_sensorhub_data,
+ TP_PROTO(u32 ec_sensor_num, u32 ec_fifo_timestamp, s64 fifo_timestamp,
+ s64 current_timestamp, s64 current_time),
+ TP_ARGS(ec_sensor_num, ec_fifo_timestamp, fifo_timestamp, current_timestamp, current_time),
+ TP_STRUCT__entry(
+ __field(u32, ec_sensor_num)
+ __field(u32, ec_fifo_timestamp)
+ __field(s64, fifo_timestamp)
+ __field(s64, current_timestamp)
+ __field(s64, current_time)
+ __field(s64, delta)
+ ),
+ TP_fast_assign(
+ __entry->ec_sensor_num = ec_sensor_num;
+ __entry->ec_fifo_timestamp = ec_fifo_timestamp;
+ __entry->fifo_timestamp = fifo_timestamp;
+ __entry->current_timestamp = current_timestamp;
+ __entry->current_time = current_time;
+ __entry->delta = current_timestamp - current_time;
+ ),
+ TP_printk("ec_num: %4u, ec_fifo_ts: %9u, fifo_ts: %12lld, curr_ts: %12lld, curr_time: %12lld, delta %12lld",
+ __entry->ec_sensor_num,
+ __entry->ec_fifo_timestamp,
+ __entry->fifo_timestamp,
+ __entry->current_timestamp,
+ __entry->current_time,
+ __entry->delta
+ )
+);
+
+TRACE_EVENT(cros_ec_sensorhub_filter,
+ TP_PROTO(struct cros_ec_sensors_ts_filter_state *state, s64 dx, s64 dy),
+ TP_ARGS(state, dx, dy),
+ TP_STRUCT__entry(
+ __field(s64, dx)
+ __field(s64, dy)
+ __field(s64, median_m)
+ __field(s64, median_error)
+ __field(s64, history_len)
+ __field(s64, x)
+ __field(s64, y)
+ ),
+ TP_fast_assign(
+ __entry->dx = dx;
+ __entry->dy = dy;
+ __entry->median_m = state->median_m;
+ __entry->median_error = state->median_error;
+ __entry->history_len = state->history_len;
+ __entry->x = state->x_offset;
+ __entry->y = state->y_offset;
+ ),
+ TP_printk("dx: %12lld. dy: %12lld median_m: %12lld median_error: %12lld len: %lld x: %12lld y: %12lld",
+ __entry->dx,
+ __entry->dy,
+ __entry->median_m,
+ __entry->median_error,
+ __entry->history_len,
+ __entry->x,
+ __entry->y
+ )
+);
+
+
+#endif /* _CROS_EC_SENSORHUB_TRACE_H_ */
+
+/* this part must be outside header guard */
+
+#undef TRACE_INCLUDE_PATH
+#define TRACE_INCLUDE_PATH .
+
+#undef TRACE_INCLUDE_FILE
+#define TRACE_INCLUDE_FILE cros_ec_sensorhub_trace
+
+#include <trace/define_trace.h>
--- a/drivers/platform/chrome/cros_ec_trace.h
+++ b/drivers/platform/chrome/cros_ec_trace.h
@@ -15,7 +15,6 @@
#include <linux/types.h>
#include <linux/platform_data/cros_ec_commands.h>
#include <linux/platform_data/cros_ec_proto.h>
-#include <linux/platform_data/cros_ec_sensorhub.h>
#include <linux/tracepoint.h>
@@ -71,100 +70,6 @@ TRACE_EVENT(cros_ec_request_done,
__entry->retval)
);
-TRACE_EVENT(cros_ec_sensorhub_timestamp,
- TP_PROTO(u32 ec_sample_timestamp, u32 ec_fifo_timestamp, s64 fifo_timestamp,
- s64 current_timestamp, s64 current_time),
- TP_ARGS(ec_sample_timestamp, ec_fifo_timestamp, fifo_timestamp, current_timestamp,
- current_time),
- TP_STRUCT__entry(
- __field(u32, ec_sample_timestamp)
- __field(u32, ec_fifo_timestamp)
- __field(s64, fifo_timestamp)
- __field(s64, current_timestamp)
- __field(s64, current_time)
- __field(s64, delta)
- ),
- TP_fast_assign(
- __entry->ec_sample_timestamp = ec_sample_timestamp;
- __entry->ec_fifo_timestamp = ec_fifo_timestamp;
- __entry->fifo_timestamp = fifo_timestamp;
- __entry->current_timestamp = current_timestamp;
- __entry->current_time = current_time;
- __entry->delta = current_timestamp - current_time;
- ),
- TP_printk("ec_ts: %9u, ec_fifo_ts: %9u, fifo_ts: %12lld, curr_ts: %12lld, curr_time: %12lld, delta %12lld",
- __entry->ec_sample_timestamp,
- __entry->ec_fifo_timestamp,
- __entry->fifo_timestamp,
- __entry->current_timestamp,
- __entry->current_time,
- __entry->delta
- )
-);
-
-TRACE_EVENT(cros_ec_sensorhub_data,
- TP_PROTO(u32 ec_sensor_num, u32 ec_fifo_timestamp, s64 fifo_timestamp,
- s64 current_timestamp, s64 current_time),
- TP_ARGS(ec_sensor_num, ec_fifo_timestamp, fifo_timestamp, current_timestamp, current_time),
- TP_STRUCT__entry(
- __field(u32, ec_sensor_num)
- __field(u32, ec_fifo_timestamp)
- __field(s64, fifo_timestamp)
- __field(s64, current_timestamp)
- __field(s64, current_time)
- __field(s64, delta)
- ),
- TP_fast_assign(
- __entry->ec_sensor_num = ec_sensor_num;
- __entry->ec_fifo_timestamp = ec_fifo_timestamp;
- __entry->fifo_timestamp = fifo_timestamp;
- __entry->current_timestamp = current_timestamp;
- __entry->current_time = current_time;
- __entry->delta = current_timestamp - current_time;
- ),
- TP_printk("ec_num: %4u, ec_fifo_ts: %9u, fifo_ts: %12lld, curr_ts: %12lld, curr_time: %12lld, delta %12lld",
- __entry->ec_sensor_num,
- __entry->ec_fifo_timestamp,
- __entry->fifo_timestamp,
- __entry->current_timestamp,
- __entry->current_time,
- __entry->delta
- )
-);
-
-TRACE_EVENT(cros_ec_sensorhub_filter,
- TP_PROTO(struct cros_ec_sensors_ts_filter_state *state, s64 dx, s64 dy),
- TP_ARGS(state, dx, dy),
- TP_STRUCT__entry(
- __field(s64, dx)
- __field(s64, dy)
- __field(s64, median_m)
- __field(s64, median_error)
- __field(s64, history_len)
- __field(s64, x)
- __field(s64, y)
- ),
- TP_fast_assign(
- __entry->dx = dx;
- __entry->dy = dy;
- __entry->median_m = state->median_m;
- __entry->median_error = state->median_error;
- __entry->history_len = state->history_len;
- __entry->x = state->x_offset;
- __entry->y = state->y_offset;
- ),
- TP_printk("dx: %12lld. dy: %12lld median_m: %12lld median_error: %12lld len: %lld x: %12lld y: %12lld",
- __entry->dx,
- __entry->dy,
- __entry->median_m,
- __entry->median_error,
- __entry->history_len,
- __entry->x,
- __entry->y
- )
-);
-
-
#endif /* _CROS_EC_TRACE_H_ */
/* this part must be outside header guard */
From: Andy Shevchenko <[email protected]>
[ Upstream commit 5318f70da7e82649d794fc27d8a127c22aa3566e ]
The pci_get_slot() increases its reference count, the caller
must decrement the reference count by calling pci_dev_put().
Fixes: 9a1870ce812e ("serial: 8250: don't use slave_id of dma_slave_config")
Depends-on: a13e19cf3dc1 ("serial: 8250_lpss: split LPSS driver to separate module")
Reported-by: Qing Wang <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/tty/serial/8250/8250_lpss.c | 28 ++++++++++++++++++++++------
1 file changed, 22 insertions(+), 6 deletions(-)
diff --git a/drivers/tty/serial/8250/8250_lpss.c b/drivers/tty/serial/8250/8250_lpss.c
index 4dee8a9e0c95..dfb730b7ea2a 100644
--- a/drivers/tty/serial/8250/8250_lpss.c
+++ b/drivers/tty/serial/8250/8250_lpss.c
@@ -121,8 +121,7 @@ static int byt_serial_setup(struct lpss8250 *lpss, struct uart_port *port)
{
struct dw_dma_slave *param = &lpss->dma_param;
struct pci_dev *pdev = to_pci_dev(port->dev);
- unsigned int dma_devfn = PCI_DEVFN(PCI_SLOT(pdev->devfn), 0);
- struct pci_dev *dma_dev = pci_get_slot(pdev->bus, dma_devfn);
+ struct pci_dev *dma_dev;
switch (pdev->device) {
case PCI_DEVICE_ID_INTEL_BYT_UART1:
@@ -141,6 +140,8 @@ static int byt_serial_setup(struct lpss8250 *lpss, struct uart_port *port)
return -EINVAL;
}
+ dma_dev = pci_get_slot(pdev->bus, PCI_DEVFN(PCI_SLOT(pdev->devfn), 0));
+
param->dma_dev = &dma_dev->dev;
param->m_master = 0;
param->p_master = 1;
@@ -156,11 +157,26 @@ static int byt_serial_setup(struct lpss8250 *lpss, struct uart_port *port)
return 0;
}
+static void byt_serial_exit(struct lpss8250 *lpss)
+{
+ struct dw_dma_slave *param = &lpss->dma_param;
+
+ /* Paired with pci_get_slot() in the byt_serial_setup() above */
+ put_device(param->dma_dev);
+}
+
static int ehl_serial_setup(struct lpss8250 *lpss, struct uart_port *port)
{
return 0;
}
+static void ehl_serial_exit(struct lpss8250 *lpss)
+{
+ struct uart_8250_port *up = serial8250_get_port(lpss->data.line);
+
+ up->dma = NULL;
+}
+
#ifdef CONFIG_SERIAL_8250_DMA
static const struct dw_dma_platform_data qrk_serial_dma_pdata = {
.nr_channels = 2,
@@ -335,8 +351,7 @@ static int lpss8250_probe(struct pci_dev *pdev, const struct pci_device_id *id)
return 0;
err_exit:
- if (lpss->board->exit)
- lpss->board->exit(lpss);
+ lpss->board->exit(lpss);
pci_free_irq_vectors(pdev);
return ret;
}
@@ -347,8 +362,7 @@ static void lpss8250_remove(struct pci_dev *pdev)
serial8250_unregister_port(lpss->data.line);
- if (lpss->board->exit)
- lpss->board->exit(lpss);
+ lpss->board->exit(lpss);
pci_free_irq_vectors(pdev);
}
@@ -356,12 +370,14 @@ static const struct lpss8250_board byt_board = {
.freq = 100000000,
.base_baud = 2764800,
.setup = byt_serial_setup,
+ .exit = byt_serial_exit,
};
static const struct lpss8250_board ehl_board = {
.freq = 200000000,
.base_baud = 12500000,
.setup = ehl_serial_setup,
+ .exit = ehl_serial_exit,
};
static const struct lpss8250_board qrk_board = {
--
2.34.1
From: Miaoqian Lin <[email protected]>
[ Upstream commit b146e343a9e05605b491b1bf4a2b62a39d5638d8 ]
The pm_runtime_enable will increase power disable depth.
Thus a pairing decrement is needed on the error handling
path to keep it balanced according to context.
Fixes: 44cfc6233447 ("drm/bridge: Add NWL MIPI DSI host controller support")
Signed-off-by: Miaoqian Lin <[email protected]>
Signed-off-by: Robert Foss <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Robert Foss <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/bridge/nwl-dsi.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/gpu/drm/bridge/nwl-dsi.c b/drivers/gpu/drm/bridge/nwl-dsi.c
index 6cac2e58cd15..b68d33598158 100644
--- a/drivers/gpu/drm/bridge/nwl-dsi.c
+++ b/drivers/gpu/drm/bridge/nwl-dsi.c
@@ -1188,6 +1188,7 @@ static int nwl_dsi_probe(struct platform_device *pdev)
ret = nwl_dsi_select_input(dsi);
if (ret < 0) {
+ pm_runtime_disable(dev);
mipi_dsi_host_unregister(&dsi->dsi_host);
return ret;
}
--
2.34.1
From: Marc Zyngier <[email protected]>
commit 825da4e9cec68713fbb02dc6f71fe1bf65fe8050 upstream.
Commit c7a75d07827a ("PCI: xgene: Fix IB window setup") tried to
fix the damages that 6dce5aa59e0b ("PCI: xgene: Use inbound resources
for setup") caused, but actually didn't improve anything for some
plarforms (at least Mustang and m400 are still broken).
Given that 6dce5aa59e0b has been reverted, revert this patch as well,
restoring the PCIe support on XGene to its pre-5.5, working state.
Link: https://lore.kernel.org/r/YjN8pT5e6/[email protected]
Link: https://lore.kernel.org/r/[email protected]
Fixes: c7a75d07827a ("PCI: xgene: Fix IB window setup")
Signed-off-by: Marc Zyngier <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Cc: [email protected]
Cc: Rob Herring <[email protected]>
Cc: Toan Le <[email protected]>
Cc: Lorenzo Pieralisi <[email protected]>
Cc: Krzysztof Wilczyński <[email protected]>
Cc: Bjorn Helgaas <[email protected]>
Cc: Stéphane Graber <[email protected]>
Cc: dann frazier <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/controller/pci-xgene.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/pci/controller/pci-xgene.c
+++ b/drivers/pci/controller/pci-xgene.c
@@ -467,7 +467,7 @@ static int xgene_pcie_select_ib_reg(u8 *
return 1;
}
- if ((size > SZ_1K) && (size < SZ_4G) && !(*ib_reg_mask & (1 << 0))) {
+ if ((size > SZ_1K) && (size < SZ_1T) && !(*ib_reg_mask & (1 << 0))) {
*ib_reg_mask |= (1 << 0);
return 0;
}
From: Z. Liu <[email protected]>
[ Upstream commit 62d89a7d49afe46e6b9bbe9e23b004ad848dbde4 ]
Start from commit 11be60bd66d54 "matroxfb: add Matrox MGA-G200eW board
support", when maxvram is 0x800000, monitor become black w/ error message
said: "The current input timing is not supported by the monitor display.
Please change your input timing to 1920x1080@60Hz ...".
Fixes: 11be60bd66d5 ("matroxfb: add Matrox MGA-G200eW board support")
Signed-off-by: Z. Liu <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/video/fbdev/matrox/matroxfb_base.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/video/fbdev/matrox/matroxfb_base.c b/drivers/video/fbdev/matrox/matroxfb_base.c
index 570439b32655..daaa99818d3b 100644
--- a/drivers/video/fbdev/matrox/matroxfb_base.c
+++ b/drivers/video/fbdev/matrox/matroxfb_base.c
@@ -1377,7 +1377,7 @@ static struct video_board vbG200 = {
.lowlevel = &matrox_G100
};
static struct video_board vbG200eW = {
- .maxvram = 0x800000,
+ .maxvram = 0x100000,
.maxdisplayable = 0x800000,
.accelID = FB_ACCEL_MATROX_MGAG200,
.lowlevel = &matrox_G100
--
2.34.1
From: Jiasheng Jiang <[email protected]>
[ Upstream commit 5a811126d38f9767a20cc271b34db7c8efc5a46c ]
Because of the possible failure of the allocation, data->domains might
be NULL pointer and will cause the dereference of the NULL pointer
later.
Therefore, it might be better to check it and directly return -ENOMEM
without releasing data manually if fails, because the comment of the
devm_kmalloc() says "Memory allocated with this function is
automatically freed on driver detach.".
Fixes: bbe3a66c3f5a ("soc: qcom: rpmpd: Add a Power domain driver to model corners")
Signed-off-by: Jiasheng Jiang <[email protected]>
Signed-off-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/soc/qcom/rpmpd.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/soc/qcom/rpmpd.c b/drivers/soc/qcom/rpmpd.c
index f2168e4259b2..c6084c0d3530 100644
--- a/drivers/soc/qcom/rpmpd.c
+++ b/drivers/soc/qcom/rpmpd.c
@@ -387,6 +387,9 @@ static int rpmpd_probe(struct platform_device *pdev)
data->domains = devm_kcalloc(&pdev->dev, num, sizeof(*data->domains),
GFP_KERNEL);
+ if (!data->domains)
+ return -ENOMEM;
+
data->num_domains = num;
for (i = 0; i < num; i++) {
--
2.34.1
From: David Heidelberg <[email protected]>
[ Upstream commit 6f7e221e7a5cfc3299616543fce42b36e631497b ]
IRQ types blindly copied from very similar APQ8064.
Fixes warnings as:
WARNING: CPU: 0 PID: 1 at drivers/irqchip/irq-gic.c:1080 gic_irq_domain_translate+0x118/0x120
...
Tested-by: LogicalErzor <[email protected]> # boot-tested on Samsung S3
Signed-off-by: David Heidelberg <[email protected]>
Signed-off-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/qcom-msm8960.dtsi | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi
index 172ea3c70eac..c197927e7435 100644
--- a/arch/arm/boot/dts/qcom-msm8960.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8960.dtsi
@@ -146,7 +146,9 @@
reg = <0x108000 0x1000>;
qcom,ipc = <&l2cc 0x8 2>;
- interrupts = <0 19 0>, <0 21 0>, <0 22 0>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "ack", "err", "wakeup";
regulators {
@@ -192,7 +194,7 @@
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
reg = <0x16440000 0x1000>,
<0x16400000 0x1000>;
- interrupts = <0 154 0x0>;
+ interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
clock-names = "core", "iface";
status = "disabled";
@@ -318,7 +320,7 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <0x16080000 0x1000>;
- interrupts = <0 147 0>;
+ interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
spi-max-frequency = <24000000>;
cs-gpios = <&msmgpio 8 0>;
--
2.34.1
From: Uwe Kleine-König <[email protected]>
[ Upstream commit dedab69fd650ea74710b2e626e63fd35584ef773 ]
Set em485->active_timer = NULL isn't always enough to take out the stop
timer. While there is a check that it acts in the right state (i.e.
waiting for RTS-after-send to pass after sending some chars) but the
following might happen:
- CPU1: some chars send, shifter becomes empty, stop tx timer armed
- CPU0: more chars send before RTS-after-send expired
- CPU0: shifter empty irq, port lock taken
- CPU1: tx timer triggers, waits for port lock
- CPU0: em485->active_timer = &em485->stop_tx_timer, hrtimer_start(),
releases lock()
- CPU1: get lock, see em485->active_timer == &em485->stop_tx_timer,
tear down RTS too early
This fix bases on research done by Steffen Trumtrar.
Fixes: b86f86e8e7c5 ("serial: 8250: fix potential deadlock in rs485-mode")
Signed-off-by: Uwe Kleine-König <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/tty/serial/8250/8250_port.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 7c07ebb37b1b..1733f03a7da7 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -1620,6 +1620,18 @@ static inline void start_tx_rs485(struct uart_port *port)
struct uart_8250_port *up = up_to_u8250p(port);
struct uart_8250_em485 *em485 = up->em485;
+ /*
+ * While serial8250_em485_handle_stop_tx() is a noop if
+ * em485->active_timer != &em485->stop_tx_timer, it might happen that
+ * the timer is still armed and triggers only after the current bunch of
+ * chars is send and em485->active_timer == &em485->stop_tx_timer again.
+ * So cancel the timer. There is still a theoretical race condition if
+ * the timer is already running and only comes around to check for
+ * em485->active_timer when &em485->stop_tx_timer is armed again.
+ */
+ if (em485->active_timer == &em485->stop_tx_timer)
+ hrtimer_try_to_cancel(&em485->stop_tx_timer);
+
em485->active_timer = NULL;
if (em485->tx_stopped) {
--
2.34.1
From: Libin Yang <[email protected]>
[ Upstream commit 3957db3ae3dae6f8b8168791f154567fe49e1fd7 ]
When clearing the sdw wakests status, we should use SDW_SHIM_WAKESTS.
Fixes: 4a17c441c7cb ("soundwire: intel: revisit SHIM programming sequences.")
Signed-off-by: Libin Yang <[email protected]>
Reviewed-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Rander Wang <[email protected]>
Signed-off-by: Bard Liao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/soundwire/intel.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/soundwire/intel.c b/drivers/soundwire/intel.c
index dad4326a2a71..824d9f900aca 100644
--- a/drivers/soundwire/intel.c
+++ b/drivers/soundwire/intel.c
@@ -521,8 +521,8 @@ static void intel_shim_wake(struct sdw_intel *sdw, bool wake_enable)
/* Clear wake status */
wake_sts = intel_readw(shim, SDW_SHIM_WAKESTS);
- wake_sts |= (SDW_SHIM_WAKEEN_ENABLE << link_id);
- intel_writew(shim, SDW_SHIM_WAKESTS_STATUS, wake_sts);
+ wake_sts |= (SDW_SHIM_WAKESTS_STATUS << link_id);
+ intel_writew(shim, SDW_SHIM_WAKESTS, wake_sts);
}
mutex_unlock(sdw->link_res->shim_lock);
}
--
2.34.1
From: Jianyong Wu <[email protected]>
[ Upstream commit ee017ee353506fcec58e481673e4331ff198a80e ]
The 'fixmap' is a global resource and is used recursively by
create pud mapping(), leading to a potential race condition in the
presence of a concurrent call to alloc_init_pud():
kernel_init thread virtio-mem workqueue thread
================== ===========================
alloc_init_pud(...) alloc_init_pud(...)
pudp = pud_set_fixmap_offset(...) pudp = pud_set_fixmap_offset(...)
READ_ONCE(*pudp)
pud_clear_fixmap(...)
READ_ONCE(*pudp) // CRASH!
As kernel may sleep during creating pud mapping, introduce a mutex lock to
serialise use of the fixmap entries by alloc_init_pud(). However, there is
no need for locking in early boot stage and it doesn't work well with
KASLR enabled when early boot. So, enable lock when system_state doesn't
equal to "SYSTEM_BOOTING".
Signed-off-by: Jianyong Wu <[email protected]>
Reviewed-by: Catalin Marinas <[email protected]>
Fixes: f4710445458c ("arm64: mm: use fixmap when creating page tables")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/mm/mmu.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/arm64/mm/mmu.c b/arch/arm64/mm/mmu.c
index 991e599f7057..a9ec8c739d37 100644
--- a/arch/arm64/mm/mmu.c
+++ b/arch/arm64/mm/mmu.c
@@ -61,6 +61,7 @@ static pmd_t bm_pmd[PTRS_PER_PMD] __page_aligned_bss __maybe_unused;
static pud_t bm_pud[PTRS_PER_PUD] __page_aligned_bss __maybe_unused;
static DEFINE_SPINLOCK(swapper_pgdir_lock);
+static DEFINE_MUTEX(fixmap_lock);
void set_swapper_pgd(pgd_t *pgdp, pgd_t pgd)
{
@@ -314,6 +315,12 @@ static void alloc_init_pud(pgd_t *pgdp, unsigned long addr, unsigned long end,
}
BUG_ON(p4d_bad(p4d));
+ /*
+ * No need for locking during early boot. And it doesn't work as
+ * expected with KASLR enabled.
+ */
+ if (system_state != SYSTEM_BOOTING)
+ mutex_lock(&fixmap_lock);
pudp = pud_set_fixmap_offset(p4dp, addr);
do {
pud_t old_pud = READ_ONCE(*pudp);
@@ -344,6 +351,8 @@ static void alloc_init_pud(pgd_t *pgdp, unsigned long addr, unsigned long end,
} while (pudp++, addr = next, addr != end);
pud_clear_fixmap();
+ if (system_state != SYSTEM_BOOTING)
+ mutex_unlock(&fixmap_lock);
}
static void __create_pgd_mapping(pgd_t *pgdir, phys_addr_t phys,
--
2.34.1
From: Miquel Raynal <[email protected]>
commit 5fd6739e0df7e320bcac103dfb95fe75941fea17 upstream.
By working with external hardware ECC engines, we figured out that
Under certain circumstances, it is needed for the SPI controller to
check INT_TX_EMPTY and INT_RX_NOT_EMPTY in both receive and transmit
path (not only in the receive path). The delay penalty being
negligible, move this code in the common path.
Fixes: b942d80b0a39 ("spi: Add MXIC controller driver")
Cc: [email protected]
Suggested-by: Mason Yang <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>
Reviewed-by: Zhengxun Li <[email protected]>
Reviewed-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/spi/spi-mxic.c | 26 +++++++++++---------------
1 file changed, 11 insertions(+), 15 deletions(-)
--- a/drivers/spi/spi-mxic.c
+++ b/drivers/spi/spi-mxic.c
@@ -304,25 +304,21 @@ static int mxic_spi_data_xfer(struct mxi
writel(data, mxic->regs + TXD(nbytes % 4));
- if (rxbuf) {
- ret = readl_poll_timeout(mxic->regs + INT_STS, sts,
- sts & INT_TX_EMPTY, 0,
- USEC_PER_SEC);
- if (ret)
- return ret;
+ ret = readl_poll_timeout(mxic->regs + INT_STS, sts,
+ sts & INT_TX_EMPTY, 0, USEC_PER_SEC);
+ if (ret)
+ return ret;
- ret = readl_poll_timeout(mxic->regs + INT_STS, sts,
- sts & INT_RX_NOT_EMPTY, 0,
- USEC_PER_SEC);
- if (ret)
- return ret;
+ ret = readl_poll_timeout(mxic->regs + INT_STS, sts,
+ sts & INT_RX_NOT_EMPTY, 0,
+ USEC_PER_SEC);
+ if (ret)
+ return ret;
- data = readl(mxic->regs + RXD);
+ data = readl(mxic->regs + RXD);
+ if (rxbuf) {
data >>= (8 * (4 - nbytes));
memcpy(rxbuf + pos, &data, nbytes);
- WARN_ON(readl(mxic->regs + INT_STS) & INT_RX_NOT_EMPTY);
- } else {
- readl(mxic->regs + RXD);
}
WARN_ON(readl(mxic->regs + INT_STS) & INT_RX_NOT_EMPTY);
From: Hou Wenlong <[email protected]>
[ Upstream commit ca85f002258fdac3762c57d12d5e6e401b6a41af ]
Per Intel's SDM on the "Instruction Set Reference", when
loading segment descriptor, not-present segment check should
be after all type and privilege checks. But the emulator checks
it first, then #NP is triggered instead of #GP if privilege fails
and segment is not present. Put not-present segment check after
type and privilege checks in __load_segment_descriptor().
Fixes: 38ba30ba51a00 (KVM: x86 emulator: Emulate task switch in emulator.c)
Reviewed-by: Sean Christopherson <[email protected]>
Signed-off-by: Hou Wenlong <[email protected]>
Message-Id: <52573c01d369f506cadcf7233812427cf7db81a7.1644292363.git.houwenlong.hwl@antgroup.com>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/kvm/emulate.c | 14 +++++++++-----
1 file changed, 9 insertions(+), 5 deletions(-)
diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c
index e82151ba95c0..a63df19ef4da 100644
--- a/arch/x86/kvm/emulate.c
+++ b/arch/x86/kvm/emulate.c
@@ -1718,11 +1718,6 @@ static int __load_segment_descriptor(struct x86_emulate_ctxt *ctxt,
goto exception;
}
- if (!seg_desc.p) {
- err_vec = (seg == VCPU_SREG_SS) ? SS_VECTOR : NP_VECTOR;
- goto exception;
- }
-
dpl = seg_desc.dpl;
switch (seg) {
@@ -1762,6 +1757,10 @@ static int __load_segment_descriptor(struct x86_emulate_ctxt *ctxt,
case VCPU_SREG_TR:
if (seg_desc.s || (seg_desc.type != 1 && seg_desc.type != 9))
goto exception;
+ if (!seg_desc.p) {
+ err_vec = NP_VECTOR;
+ goto exception;
+ }
old_desc = seg_desc;
seg_desc.type |= 2; /* busy */
ret = ctxt->ops->cmpxchg_emulated(ctxt, desc_addr, &old_desc, &seg_desc,
@@ -1786,6 +1785,11 @@ static int __load_segment_descriptor(struct x86_emulate_ctxt *ctxt,
break;
}
+ if (!seg_desc.p) {
+ err_vec = (seg == VCPU_SREG_SS) ? SS_VECTOR : NP_VECTOR;
+ goto exception;
+ }
+
if (seg_desc.s) {
/* mark segment as accessed */
if (!(seg_desc.type & 1)) {
--
2.34.1
From: Christophe Leroy <[email protected]>
[ Upstream commit 2f293651eca3eacaeb56747dede31edace7329d2 ]
Trying to build livepatch on powerpc/32 results in:
kernel/livepatch/core.c: In function 'klp_resolve_symbols':
kernel/livepatch/core.c:221:23: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
221 | sym = (Elf64_Sym *)sechdrs[symndx].sh_addr + ELF_R_SYM(relas[i].r_info);
| ^
kernel/livepatch/core.c:221:21: error: assignment to 'Elf32_Sym *' {aka 'struct elf32_sym *'} from incompatible pointer type 'Elf64_Sym *' {aka 'struct elf64_sym *'} [-Werror=incompatible-pointer-types]
221 | sym = (Elf64_Sym *)sechdrs[symndx].sh_addr + ELF_R_SYM(relas[i].r_info);
| ^
kernel/livepatch/core.c: In function 'klp_apply_section_relocs':
kernel/livepatch/core.c:312:35: error: passing argument 1 of 'klp_resolve_symbols' from incompatible pointer type [-Werror=incompatible-pointer-types]
312 | ret = klp_resolve_symbols(sechdrs, strtab, symndx, sec, sec_objname);
| ^~~~~~~
| |
| Elf32_Shdr * {aka struct elf32_shdr *}
kernel/livepatch/core.c:193:44: note: expected 'Elf64_Shdr *' {aka 'struct elf64_shdr *'} but argument is of type 'Elf32_Shdr *' {aka 'struct elf32_shdr *'}
193 | static int klp_resolve_symbols(Elf64_Shdr *sechdrs, const char *strtab,
| ~~~~~~~~~~~~^~~~~~~
Fix it by using the right types instead of forcing 64 bits types.
Fixes: 7c8e2bdd5f0d ("livepatch: Apply vmlinux-specific KLP relocations early")
Signed-off-by: Christophe Leroy <[email protected]>
Acked-by: Petr Mladek <[email protected]>
Acked-by: Joe Lawrence <[email protected]>
Acked-by: Miroslav Benes <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/5288e11b018a762ea3351cc8fb2d4f15093a4457.1640017960.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/livepatch/core.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/kernel/livepatch/core.c b/kernel/livepatch/core.c
index f76fdb925532..e8bdce6fdd64 100644
--- a/kernel/livepatch/core.c
+++ b/kernel/livepatch/core.c
@@ -191,7 +191,7 @@ static int klp_find_object_symbol(const char *objname, const char *name,
return -EINVAL;
}
-static int klp_resolve_symbols(Elf64_Shdr *sechdrs, const char *strtab,
+static int klp_resolve_symbols(Elf_Shdr *sechdrs, const char *strtab,
unsigned int symndx, Elf_Shdr *relasec,
const char *sec_objname)
{
@@ -219,7 +219,7 @@ static int klp_resolve_symbols(Elf64_Shdr *sechdrs, const char *strtab,
relas = (Elf_Rela *) relasec->sh_addr;
/* For each rela in this klp relocation section */
for (i = 0; i < relasec->sh_size / sizeof(Elf_Rela); i++) {
- sym = (Elf64_Sym *)sechdrs[symndx].sh_addr + ELF_R_SYM(relas[i].r_info);
+ sym = (Elf_Sym *)sechdrs[symndx].sh_addr + ELF_R_SYM(relas[i].r_info);
if (sym->st_shndx != SHN_LIVEPATCH) {
pr_err("symbol %s is not marked as a livepatch symbol\n",
strtab + sym->st_name);
--
2.34.1
From: Christoph Hellwig <[email protected]>
[ Upstream commit fd8099e7918cd2df39ef306dd1d1af7178a15b81 ]
Pass the actual nvme_ns_ids used for the comparison instead of the
ns_head that isn't needed and use a more descriptive function name.
Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Keith Busch <[email protected]>
Reviewed-by: Chaitanya Kulkarni <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/nvme/host/core.c | 9 ++++-----
1 file changed, 4 insertions(+), 5 deletions(-)
diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index 71c85c99e86c..853b9a24f744 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -3681,16 +3681,15 @@ static struct nvme_ns_head *nvme_find_ns_head(struct nvme_subsystem *subsys,
return NULL;
}
-static int __nvme_check_ids(struct nvme_subsystem *subsys,
- struct nvme_ns_head *new)
+static int nvme_subsys_check_duplicate_ids(struct nvme_subsystem *subsys,
+ struct nvme_ns_ids *ids)
{
struct nvme_ns_head *h;
lockdep_assert_held(&subsys->lock);
list_for_each_entry(h, &subsys->nsheads, entry) {
- if (nvme_ns_ids_valid(&new->ids) &&
- nvme_ns_ids_equal(&new->ids, &h->ids))
+ if (nvme_ns_ids_valid(ids) && nvme_ns_ids_equal(ids, &h->ids))
return -EINVAL;
}
@@ -3724,7 +3723,7 @@ static struct nvme_ns_head *nvme_alloc_ns_head(struct nvme_ctrl *ctrl,
head->ids = *ids;
kref_init(&head->ref);
- ret = __nvme_check_ids(ctrl->subsys, head);
+ ret = nvme_subsys_check_duplicate_ids(ctrl->subsys, &head->ids);
if (ret) {
dev_err(ctrl->device,
"duplicate IDs for nsid %d\n", nsid);
--
2.34.1
From: Corentin Labbe <[email protected]>
[ Upstream commit b169b3766242b6f3336e24a6c8ee1522978b57a7 ]
Doing ipsec produces a spinlock recursion warning.
This is due to not disabling BH during crypto completion function.
Fixes: f08fcced6d00 ("crypto: allwinner - Add sun8i-ss cryptographic offloader")
Signed-off-by: Corentin Labbe <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/crypto/allwinner/sun8i-ss/sun8i-ss-cipher.c | 3 +++
drivers/crypto/allwinner/sun8i-ss/sun8i-ss-hash.c | 3 +++
2 files changed, 6 insertions(+)
diff --git a/drivers/crypto/allwinner/sun8i-ss/sun8i-ss-cipher.c b/drivers/crypto/allwinner/sun8i-ss/sun8i-ss-cipher.c
index 7c355bc2fb06..f783748462f9 100644
--- a/drivers/crypto/allwinner/sun8i-ss/sun8i-ss-cipher.c
+++ b/drivers/crypto/allwinner/sun8i-ss/sun8i-ss-cipher.c
@@ -11,6 +11,7 @@
* You could find a link for the datasheet in Documentation/arm/sunxi.rst
*/
+#include <linux/bottom_half.h>
#include <linux/crypto.h>
#include <linux/dma-mapping.h>
#include <linux/io.h>
@@ -271,7 +272,9 @@ static int sun8i_ss_handle_cipher_request(struct crypto_engine *engine, void *ar
struct skcipher_request *breq = container_of(areq, struct skcipher_request, base);
err = sun8i_ss_cipher(breq);
+ local_bh_disable();
crypto_finalize_skcipher_request(engine, breq, err);
+ local_bh_enable();
return 0;
}
diff --git a/drivers/crypto/allwinner/sun8i-ss/sun8i-ss-hash.c b/drivers/crypto/allwinner/sun8i-ss/sun8i-ss-hash.c
index 756d5a783548..c9edecd43ef9 100644
--- a/drivers/crypto/allwinner/sun8i-ss/sun8i-ss-hash.c
+++ b/drivers/crypto/allwinner/sun8i-ss/sun8i-ss-hash.c
@@ -9,6 +9,7 @@
*
* You could find the datasheet in Documentation/arm/sunxi.rst
*/
+#include <linux/bottom_half.h>
#include <linux/dma-mapping.h>
#include <linux/pm_runtime.h>
#include <linux/scatterlist.h>
@@ -440,6 +441,8 @@ int sun8i_ss_hash_run(struct crypto_engine *engine, void *breq)
theend:
kfree(pad);
kfree(result);
+ local_bh_disable();
crypto_finalize_hash_request(engine, breq, err);
+ local_bh_enable();
return 0;
}
--
2.34.1
From: Dan Carpenter <[email protected]>
[ Upstream commit 583d18336abdfb1b355270289ff8f6a2608ba905 ]
Return -ENODEV instead of success on this error path.
Fixes: dd36a507c806 ("iwlwifi: mvm: look for the first supported channel when add/remove phy ctxt")
Signed-off-by: Dan Carpenter <[email protected]>
Link: https://lore.kernel.org/r/20210816183930.GA2068@kili
Signed-off-by: Luca Coelho <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/intel/iwlwifi/mvm/fw.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/fw.c b/drivers/net/wireless/intel/iwlwifi/mvm/fw.c
index 6348dfa61724..54b28f0932e2 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/fw.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/fw.c
@@ -1495,8 +1495,10 @@ int iwl_mvm_up(struct iwl_mvm *mvm)
while (!sband && i < NUM_NL80211_BANDS)
sband = mvm->hw->wiphy->bands[i++];
- if (WARN_ON_ONCE(!sband))
+ if (WARN_ON_ONCE(!sband)) {
+ ret = -ENODEV;
goto error;
+ }
chan = &sband->channels[0];
--
2.34.1
From: Jani Nikula <[email protected]>
commit 24a644ebbfd3b13cda702f98907f9dd123e34bf9 upstream.
The mapping from enum port to whatever port numbering scheme is used by
the SWSCI Display Power State Notification is odd, and the memory of it
has faded. In any case, the parameter only has space for ports numbered
[0..4], and UBSAN reports bit shift beyond it when the platform has port
F or more.
Since the SWSCI functionality is supposed to be obsolete for new
platforms (i.e. ones that might have port F or more), just bail out
early if the mapped and mangled port number is beyond what the Display
Power State Notification can support.
Fixes: 9c4b0a683193 ("drm/i915: add opregion function to notify bios of encoder enable/disable")
Cc: <[email protected]> # v3.13+
Cc: Ville Syrjälä <[email protected]>
Cc: Lucas De Marchi <[email protected]>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/4800
Signed-off-by: Jani Nikula <[email protected]>
Reviewed-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/cc363f42d6b5a5932b6d218fefcc8bdfb15dbbe5.1644489329.git.jani.nikula@intel.com
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/i915/display/intel_opregion.c | 15 +++++++++++++++
1 file changed, 15 insertions(+)
--- a/drivers/gpu/drm/i915/display/intel_opregion.c
+++ b/drivers/gpu/drm/i915/display/intel_opregion.c
@@ -376,6 +376,21 @@ int intel_opregion_notify_encoder(struct
return -EINVAL;
}
+ /*
+ * The port numbering and mapping here is bizarre. The now-obsolete
+ * swsci spec supports ports numbered [0..4]. Port E is handled as a
+ * special case, but port F and beyond are not. The functionality is
+ * supposed to be obsolete for new platforms. Just bail out if the port
+ * number is out of bounds after mapping.
+ */
+ if (port > 4) {
+ drm_dbg_kms(&dev_priv->drm,
+ "[ENCODER:%d:%s] port %c (index %u) out of bounds for display power state notification\n",
+ intel_encoder->base.base.id, intel_encoder->base.name,
+ port_name(intel_encoder->port), port);
+ return -EINVAL;
+ }
+
if (!enable)
parm |= 4 << 8;
From: Mathias Nyman <[email protected]>
commit 14073ce951b5919da450022c050772902f24f054 upstream.
xhci_reset() timeout was increased from 250ms to 10 seconds in order to
give Renesas 720201 xHC enough time to get ready in probe.
xhci_reset() is called with interrupts disabled in other places, and
waiting for 10 seconds there is not acceptable.
Add a timeout parameter to xhci_reset(), and adjust it back to 250ms
when called from xhci_stop() or xhci_shutdown() where interrupts are
disabled, and successful reset isn't that critical.
This solves issues when deactivating host mode on platforms like SM8450.
For now don't change the timeout if xHC is reset in xhci_resume().
No issues are reported for it, and we need the reset to succeed.
Locking around that reset needs to be revisited later.
Additionally change the signed integer timeout parameter in
xhci_handshake() to a u64 to match the timeout value we pass to
readl_poll_timeout_atomic()
Fixes: 22ceac191211 ("xhci: Increase reset timeout for Renesas 720201 host.")
Cc: [email protected]
Reported-by: Sergey Shtylyov <[email protected]>
Reported-by: Pavan Kondeti <[email protected]>
Tested-by: Pavan Kondeti <[email protected]>
Signed-off-by: Mathias Nyman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/host/xhci-hub.c | 2 +-
drivers/usb/host/xhci-mem.c | 2 +-
drivers/usb/host/xhci.c | 20 +++++++++-----------
drivers/usb/host/xhci.h | 7 +++++--
4 files changed, 16 insertions(+), 15 deletions(-)
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -676,7 +676,7 @@ static int xhci_exit_test_mode(struct xh
}
pm_runtime_allow(xhci_to_hcd(xhci)->self.controller);
xhci->test_mode = 0;
- return xhci_reset(xhci);
+ return xhci_reset(xhci, XHCI_RESET_SHORT_USEC);
}
void xhci_set_link_state(struct xhci_hcd *xhci, struct xhci_port *port,
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -2595,7 +2595,7 @@ int xhci_mem_init(struct xhci_hcd *xhci,
fail:
xhci_halt(xhci);
- xhci_reset(xhci);
+ xhci_reset(xhci, XHCI_RESET_SHORT_USEC);
xhci_mem_cleanup(xhci);
return -ENOMEM;
}
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -66,7 +66,7 @@ static bool td_on_ring(struct xhci_td *t
* handshake done). There are two failure modes: "usec" have passed (major
* hardware flakeout), or the register reads as all-ones (hardware removed).
*/
-int xhci_handshake(void __iomem *ptr, u32 mask, u32 done, int usec)
+int xhci_handshake(void __iomem *ptr, u32 mask, u32 done, u64 timeout_us)
{
u32 result;
int ret;
@@ -74,7 +74,7 @@ int xhci_handshake(void __iomem *ptr, u3
ret = readl_poll_timeout_atomic(ptr, result,
(result & mask) == done ||
result == U32_MAX,
- 1, usec);
+ 1, timeout_us);
if (result == U32_MAX) /* card removed */
return -ENODEV;
@@ -163,7 +163,7 @@ int xhci_start(struct xhci_hcd *xhci)
* Transactions will be terminated immediately, and operational registers
* will be set to their defaults.
*/
-int xhci_reset(struct xhci_hcd *xhci)
+int xhci_reset(struct xhci_hcd *xhci, u64 timeout_us)
{
u32 command;
u32 state;
@@ -196,8 +196,7 @@ int xhci_reset(struct xhci_hcd *xhci)
if (xhci->quirks & XHCI_INTEL_HOST)
udelay(1000);
- ret = xhci_handshake(&xhci->op_regs->command,
- CMD_RESET, 0, 10 * 1000 * 1000);
+ ret = xhci_handshake(&xhci->op_regs->command, CMD_RESET, 0, timeout_us);
if (ret)
return ret;
@@ -210,8 +209,7 @@ int xhci_reset(struct xhci_hcd *xhci)
* xHCI cannot write to any doorbells or operational registers other
* than status until the "Controller Not Ready" flag is cleared.
*/
- ret = xhci_handshake(&xhci->op_regs->status,
- STS_CNR, 0, 10 * 1000 * 1000);
+ ret = xhci_handshake(&xhci->op_regs->status, STS_CNR, 0, timeout_us);
xhci->usb2_rhub.bus_state.port_c_suspend = 0;
xhci->usb2_rhub.bus_state.suspended_ports = 0;
@@ -732,7 +730,7 @@ static void xhci_stop(struct usb_hcd *hc
xhci->xhc_state |= XHCI_STATE_HALTED;
xhci->cmd_ring_state = CMD_RING_STATE_STOPPED;
xhci_halt(xhci);
- xhci_reset(xhci);
+ xhci_reset(xhci, XHCI_RESET_SHORT_USEC);
spin_unlock_irq(&xhci->lock);
xhci_cleanup_msix(xhci);
@@ -785,7 +783,7 @@ void xhci_shutdown(struct usb_hcd *hcd)
xhci_halt(xhci);
/* Workaround for spurious wakeups at shutdown with HSW */
if (xhci->quirks & XHCI_SPURIOUS_WAKEUP)
- xhci_reset(xhci);
+ xhci_reset(xhci, XHCI_RESET_SHORT_USEC);
spin_unlock_irq(&xhci->lock);
xhci_cleanup_msix(xhci);
@@ -1170,7 +1168,7 @@ int xhci_resume(struct xhci_hcd *xhci, b
xhci_dbg(xhci, "Stop HCD\n");
xhci_halt(xhci);
xhci_zero_64b_regs(xhci);
- retval = xhci_reset(xhci);
+ retval = xhci_reset(xhci, XHCI_RESET_LONG_USEC);
spin_unlock_irq(&xhci->lock);
if (retval)
return retval;
@@ -5276,7 +5274,7 @@ int xhci_gen_setup(struct usb_hcd *hcd,
xhci_dbg(xhci, "Resetting HCD\n");
/* Reset the internal HC memory state and registers. */
- retval = xhci_reset(xhci);
+ retval = xhci_reset(xhci, XHCI_RESET_LONG_USEC);
if (retval)
return retval;
xhci_dbg(xhci, "Reset complete\n");
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -229,6 +229,9 @@ struct xhci_op_regs {
#define CMD_ETE (1 << 14)
/* bits 15:31 are reserved (and should be preserved on writes). */
+#define XHCI_RESET_LONG_USEC (10 * 1000 * 1000)
+#define XHCI_RESET_SHORT_USEC (250 * 1000)
+
/* IMAN - Interrupt Management Register */
#define IMAN_IE (1 << 1)
#define IMAN_IP (1 << 0)
@@ -2068,11 +2071,11 @@ void xhci_free_container_ctx(struct xhci
/* xHCI host controller glue */
typedef void (*xhci_get_quirks_t)(struct device *, struct xhci_hcd *);
-int xhci_handshake(void __iomem *ptr, u32 mask, u32 done, int usec);
+int xhci_handshake(void __iomem *ptr, u32 mask, u32 done, u64 timeout_us);
void xhci_quiesce(struct xhci_hcd *xhci);
int xhci_halt(struct xhci_hcd *xhci);
int xhci_start(struct xhci_hcd *xhci);
-int xhci_reset(struct xhci_hcd *xhci);
+int xhci_reset(struct xhci_hcd *xhci, u64 timeout_us);
int xhci_run(struct usb_hcd *hcd);
int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks);
void xhci_shutdown(struct usb_hcd *hcd);
From: Chen-Yu Tsai <[email protected]>
[ Upstream commit 89d78e0133e71ba324fb67ca776223fba4353418 ]
The Hantro H1 hardware can crop off pixels from the right and bottom of
the source frame. These are controlled with the H1_REG_IN_IMG_CTRL_OVRFLB
and H1_REG_IN_IMG_CTRL_OVRFLR in the H1_REG_IN_IMG_CTRL register.
The ChromeOS kernel driver that this was based on incorrectly added the
_D4 suffix H1_REG_IN_IMG_CTRL_OVRFLB. This field crops the bottom of the
input frame, and the number is _not_ divided by 4. [1]
Correct the name to avoid confusion when crop support with the selection
API is added.
[1] https://chromium.googlesource.com/chromiumos/third_party/kernel/+/refs/ \
heads/chromeos-4.19/drivers/staging/media/hantro/hantro_h1_vp8_enc.c#377
Fixes: 775fec69008d ("media: add Rockchip VPU JPEG encoder driver")
Fixes: a29add8c9bb2 ("media: rockchip/vpu: rename from rockchip to hantro")
Signed-off-by: Chen-Yu Tsai <[email protected]>
Reviewed-by: Ezequiel Garcia <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/staging/media/hantro/hantro_h1_jpeg_enc.c | 2 +-
drivers/staging/media/hantro/hantro_h1_regs.h | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/staging/media/hantro/hantro_h1_jpeg_enc.c b/drivers/staging/media/hantro/hantro_h1_jpeg_enc.c
index b88dc4ed06db..ed244aee196c 100644
--- a/drivers/staging/media/hantro/hantro_h1_jpeg_enc.c
+++ b/drivers/staging/media/hantro/hantro_h1_jpeg_enc.c
@@ -23,7 +23,7 @@ static void hantro_h1_set_src_img_ctrl(struct hantro_dev *vpu,
reg = H1_REG_IN_IMG_CTRL_ROW_LEN(pix_fmt->width)
| H1_REG_IN_IMG_CTRL_OVRFLR_D4(0)
- | H1_REG_IN_IMG_CTRL_OVRFLB_D4(0)
+ | H1_REG_IN_IMG_CTRL_OVRFLB(0)
| H1_REG_IN_IMG_CTRL_FMT(ctx->vpu_src_fmt->enc_fmt);
vepu_write_relaxed(vpu, reg, H1_REG_IN_IMG_CTRL);
}
diff --git a/drivers/staging/media/hantro/hantro_h1_regs.h b/drivers/staging/media/hantro/hantro_h1_regs.h
index d6e9825bb5c7..30e7e7b920b5 100644
--- a/drivers/staging/media/hantro/hantro_h1_regs.h
+++ b/drivers/staging/media/hantro/hantro_h1_regs.h
@@ -47,7 +47,7 @@
#define H1_REG_IN_IMG_CTRL 0x03c
#define H1_REG_IN_IMG_CTRL_ROW_LEN(x) ((x) << 12)
#define H1_REG_IN_IMG_CTRL_OVRFLR_D4(x) ((x) << 10)
-#define H1_REG_IN_IMG_CTRL_OVRFLB_D4(x) ((x) << 6)
+#define H1_REG_IN_IMG_CTRL_OVRFLB(x) ((x) << 6)
#define H1_REG_IN_IMG_CTRL_FMT(x) ((x) << 2)
#define H1_REG_ENC_CTRL0 0x040
#define H1_REG_ENC_CTRL0_INIT_QP(x) ((x) << 26)
--
2.34.1
From: Uwe Kleine-König <[email protected]>
[ Upstream commit 3fd269e74f2feec973f45ee11d822faeda4fe284 ]
All amba drivers return 0 in their remove callback. Together with the
driver core ignoring the return value anyhow, it doesn't make sense to
return a value here.
Change the remove prototype to return void, which makes it explicit that
returning an error value doesn't work as expected. This simplifies changing
the core remove callback to return void, too.
Reviewed-by: Ulf Hansson <[email protected]>
Reviewed-by: Arnd Bergmann <[email protected]>
Acked-by: Alexandre Belloni <[email protected]>
Acked-by: Dmitry Torokhov <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]> # for drivers/memory
Acked-by: Mark Brown <[email protected]>
Acked-by: Linus Walleij <[email protected]>
Acked-by: Suzuki K Poulose <[email protected]> # for hwtracing/coresight
Acked-By: Vinod Koul <[email protected]> # for dmaengine
Acked-by: Guenter Roeck <[email protected]> # for watchdog
Acked-by: Wolfram Sang <[email protected]> # for I2C
Acked-by: Takashi Iwai <[email protected]> # for sound
Acked-by: Vladimir Zapolskiy <[email protected]> # for memory/pl172
Acked-by: Greg Kroah-Hartman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Uwe Kleine-König <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/amba/bus.c | 5 ++---
drivers/char/hw_random/nomadik-rng.c | 3 +--
drivers/dma/pl330.c | 3 +--
drivers/gpu/drm/pl111/pl111_drv.c | 4 +---
drivers/hwtracing/coresight/coresight-catu.c | 3 +--
drivers/hwtracing/coresight/coresight-cpu-debug.c | 4 +---
drivers/hwtracing/coresight/coresight-cti-core.c | 4 +---
drivers/hwtracing/coresight/coresight-etb10.c | 4 +---
drivers/hwtracing/coresight/coresight-etm3x-core.c | 4 +---
drivers/hwtracing/coresight/coresight-etm4x-core.c | 4 +---
drivers/hwtracing/coresight/coresight-funnel.c | 4 ++--
drivers/hwtracing/coresight/coresight-replicator.c | 4 ++--
drivers/hwtracing/coresight/coresight-stm.c | 4 +---
drivers/hwtracing/coresight/coresight-tmc-core.c | 4 +---
drivers/hwtracing/coresight/coresight-tpiu.c | 4 +---
drivers/i2c/busses/i2c-nomadik.c | 4 +---
drivers/input/serio/ambakmi.c | 3 +--
drivers/memory/pl172.c | 4 +---
drivers/memory/pl353-smc.c | 4 +---
drivers/mmc/host/mmci.c | 4 +---
drivers/rtc/rtc-pl030.c | 4 +---
drivers/rtc/rtc-pl031.c | 4 +---
drivers/spi/spi-pl022.c | 5 ++---
drivers/tty/serial/amba-pl010.c | 4 +---
drivers/tty/serial/amba-pl011.c | 3 +--
drivers/vfio/platform/vfio_amba.c | 3 +--
drivers/video/fbdev/amba-clcd.c | 4 +---
drivers/watchdog/sp805_wdt.c | 4 +---
include/linux/amba/bus.h | 2 +-
sound/arm/aaci.c | 4 +---
30 files changed, 34 insertions(+), 80 deletions(-)
diff --git a/drivers/amba/bus.c b/drivers/amba/bus.c
index 8f4ae6e967e3..47c72447ccd5 100644
--- a/drivers/amba/bus.c
+++ b/drivers/amba/bus.c
@@ -299,11 +299,10 @@ static int amba_remove(struct device *dev)
{
struct amba_device *pcdev = to_amba_device(dev);
struct amba_driver *drv = to_amba_driver(dev->driver);
- int ret = 0;
pm_runtime_get_sync(dev);
if (drv->remove)
- ret = drv->remove(pcdev);
+ drv->remove(pcdev);
pm_runtime_put_noidle(dev);
/* Undo the runtime PM settings in amba_probe() */
@@ -314,7 +313,7 @@ static int amba_remove(struct device *dev)
amba_put_disable_pclk(pcdev);
dev_pm_domain_detach(dev, true);
- return ret;
+ return 0;
}
static void amba_shutdown(struct device *dev)
diff --git a/drivers/char/hw_random/nomadik-rng.c b/drivers/char/hw_random/nomadik-rng.c
index b0ded41eb865..67947a19aa22 100644
--- a/drivers/char/hw_random/nomadik-rng.c
+++ b/drivers/char/hw_random/nomadik-rng.c
@@ -69,11 +69,10 @@ static int nmk_rng_probe(struct amba_device *dev, const struct amba_id *id)
return ret;
}
-static int nmk_rng_remove(struct amba_device *dev)
+static void nmk_rng_remove(struct amba_device *dev)
{
amba_release_regions(dev);
clk_disable(rng_clk);
- return 0;
}
static const struct amba_id nmk_rng_ids[] = {
diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c
index dfbf514188f3..6dca548f4dab 100644
--- a/drivers/dma/pl330.c
+++ b/drivers/dma/pl330.c
@@ -3199,7 +3199,7 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id)
return ret;
}
-static int pl330_remove(struct amba_device *adev)
+static void pl330_remove(struct amba_device *adev)
{
struct pl330_dmac *pl330 = amba_get_drvdata(adev);
struct dma_pl330_chan *pch, *_p;
@@ -3239,7 +3239,6 @@ static int pl330_remove(struct amba_device *adev)
if (pl330->rstc)
reset_control_assert(pl330->rstc);
- return 0;
}
static const struct amba_id pl330_ids[] = {
diff --git a/drivers/gpu/drm/pl111/pl111_drv.c b/drivers/gpu/drm/pl111/pl111_drv.c
index 46b0d1c4a16c..d5e8e3a8bff3 100644
--- a/drivers/gpu/drm/pl111/pl111_drv.c
+++ b/drivers/gpu/drm/pl111/pl111_drv.c
@@ -324,7 +324,7 @@ static int pl111_amba_probe(struct amba_device *amba_dev,
return ret;
}
-static int pl111_amba_remove(struct amba_device *amba_dev)
+static void pl111_amba_remove(struct amba_device *amba_dev)
{
struct device *dev = &amba_dev->dev;
struct drm_device *drm = amba_get_drvdata(amba_dev);
@@ -335,8 +335,6 @@ static int pl111_amba_remove(struct amba_device *amba_dev)
drm_panel_bridge_remove(priv->bridge);
drm_dev_put(drm);
of_reserved_mem_device_release(dev);
-
- return 0;
}
/*
diff --git a/drivers/hwtracing/coresight/coresight-catu.c b/drivers/hwtracing/coresight/coresight-catu.c
index a61313f320bd..8e19e8cdcce5 100644
--- a/drivers/hwtracing/coresight/coresight-catu.c
+++ b/drivers/hwtracing/coresight/coresight-catu.c
@@ -567,12 +567,11 @@ static int catu_probe(struct amba_device *adev, const struct amba_id *id)
return ret;
}
-static int catu_remove(struct amba_device *adev)
+static void catu_remove(struct amba_device *adev)
{
struct catu_drvdata *drvdata = dev_get_drvdata(&adev->dev);
coresight_unregister(drvdata->csdev);
- return 0;
}
static struct amba_id catu_ids[] = {
diff --git a/drivers/hwtracing/coresight/coresight-cpu-debug.c b/drivers/hwtracing/coresight/coresight-cpu-debug.c
index e1d232411d8d..2dcf13de751f 100644
--- a/drivers/hwtracing/coresight/coresight-cpu-debug.c
+++ b/drivers/hwtracing/coresight/coresight-cpu-debug.c
@@ -627,7 +627,7 @@ static int debug_probe(struct amba_device *adev, const struct amba_id *id)
return ret;
}
-static int debug_remove(struct amba_device *adev)
+static void debug_remove(struct amba_device *adev)
{
struct device *dev = &adev->dev;
struct debug_drvdata *drvdata = amba_get_drvdata(adev);
@@ -642,8 +642,6 @@ static int debug_remove(struct amba_device *adev)
if (!--debug_count)
debug_func_exit();
-
- return 0;
}
static const struct amba_cs_uci_id uci_id_debug[] = {
diff --git a/drivers/hwtracing/coresight/coresight-cti-core.c b/drivers/hwtracing/coresight/coresight-cti-core.c
index 7ea93598f0ee..0276700c246d 100644
--- a/drivers/hwtracing/coresight/coresight-cti-core.c
+++ b/drivers/hwtracing/coresight/coresight-cti-core.c
@@ -836,7 +836,7 @@ static void cti_device_release(struct device *dev)
if (drvdata->csdev_release)
drvdata->csdev_release(dev);
}
-static int cti_remove(struct amba_device *adev)
+static void cti_remove(struct amba_device *adev)
{
struct cti_drvdata *drvdata = dev_get_drvdata(&adev->dev);
@@ -845,8 +845,6 @@ static int cti_remove(struct amba_device *adev)
mutex_unlock(&ect_mutex);
coresight_unregister(drvdata->csdev);
-
- return 0;
}
static int cti_probe(struct amba_device *adev, const struct amba_id *id)
diff --git a/drivers/hwtracing/coresight/coresight-etb10.c b/drivers/hwtracing/coresight/coresight-etb10.c
index 0cf6f0b947b6..51c801c05e5c 100644
--- a/drivers/hwtracing/coresight/coresight-etb10.c
+++ b/drivers/hwtracing/coresight/coresight-etb10.c
@@ -803,7 +803,7 @@ static int etb_probe(struct amba_device *adev, const struct amba_id *id)
return ret;
}
-static int etb_remove(struct amba_device *adev)
+static void etb_remove(struct amba_device *adev)
{
struct etb_drvdata *drvdata = dev_get_drvdata(&adev->dev);
@@ -814,8 +814,6 @@ static int etb_remove(struct amba_device *adev)
*/
misc_deregister(&drvdata->miscdev);
coresight_unregister(drvdata->csdev);
-
- return 0;
}
#ifdef CONFIG_PM
diff --git a/drivers/hwtracing/coresight/coresight-etm3x-core.c b/drivers/hwtracing/coresight/coresight-etm3x-core.c
index 5bf5a5a4ce6d..683a69e88efd 100644
--- a/drivers/hwtracing/coresight/coresight-etm3x-core.c
+++ b/drivers/hwtracing/coresight/coresight-etm3x-core.c
@@ -909,7 +909,7 @@ static void clear_etmdrvdata(void *info)
etmdrvdata[cpu] = NULL;
}
-static int etm_remove(struct amba_device *adev)
+static void etm_remove(struct amba_device *adev)
{
struct etm_drvdata *drvdata = dev_get_drvdata(&adev->dev);
@@ -932,8 +932,6 @@ static int etm_remove(struct amba_device *adev)
cpus_read_unlock();
coresight_unregister(drvdata->csdev);
-
- return 0;
}
#ifdef CONFIG_PM
diff --git a/drivers/hwtracing/coresight/coresight-etm4x-core.c b/drivers/hwtracing/coresight/coresight-etm4x-core.c
index 74d3e2fe43d4..99df453575f5 100644
--- a/drivers/hwtracing/coresight/coresight-etm4x-core.c
+++ b/drivers/hwtracing/coresight/coresight-etm4x-core.c
@@ -1582,7 +1582,7 @@ static void clear_etmdrvdata(void *info)
etmdrvdata[cpu] = NULL;
}
-static int etm4_remove(struct amba_device *adev)
+static void etm4_remove(struct amba_device *adev)
{
struct etmv4_drvdata *drvdata = dev_get_drvdata(&adev->dev);
@@ -1605,8 +1605,6 @@ static int etm4_remove(struct amba_device *adev)
cpus_read_unlock();
coresight_unregister(drvdata->csdev);
-
- return 0;
}
static const struct amba_id etm4_ids[] = {
diff --git a/drivers/hwtracing/coresight/coresight-funnel.c b/drivers/hwtracing/coresight/coresight-funnel.c
index 3fc6c678b51d..b2fb853776d7 100644
--- a/drivers/hwtracing/coresight/coresight-funnel.c
+++ b/drivers/hwtracing/coresight/coresight-funnel.c
@@ -370,9 +370,9 @@ static int dynamic_funnel_probe(struct amba_device *adev,
return funnel_probe(&adev->dev, &adev->res);
}
-static int dynamic_funnel_remove(struct amba_device *adev)
+static void dynamic_funnel_remove(struct amba_device *adev)
{
- return funnel_remove(&adev->dev);
+ funnel_remove(&adev->dev);
}
static const struct amba_id dynamic_funnel_ids[] = {
diff --git a/drivers/hwtracing/coresight/coresight-replicator.c b/drivers/hwtracing/coresight/coresight-replicator.c
index 38008aca2c0f..da2bfeeabc1b 100644
--- a/drivers/hwtracing/coresight/coresight-replicator.c
+++ b/drivers/hwtracing/coresight/coresight-replicator.c
@@ -388,9 +388,9 @@ static int dynamic_replicator_probe(struct amba_device *adev,
return replicator_probe(&adev->dev, &adev->res);
}
-static int dynamic_replicator_remove(struct amba_device *adev)
+static void dynamic_replicator_remove(struct amba_device *adev)
{
- return replicator_remove(&adev->dev);
+ replicator_remove(&adev->dev);
}
static const struct amba_id dynamic_replicator_ids[] = {
diff --git a/drivers/hwtracing/coresight/coresight-stm.c b/drivers/hwtracing/coresight/coresight-stm.c
index 587c1d7f2520..0ecca9f93f3a 100644
--- a/drivers/hwtracing/coresight/coresight-stm.c
+++ b/drivers/hwtracing/coresight/coresight-stm.c
@@ -951,15 +951,13 @@ static int stm_probe(struct amba_device *adev, const struct amba_id *id)
return ret;
}
-static int stm_remove(struct amba_device *adev)
+static void stm_remove(struct amba_device *adev)
{
struct stm_drvdata *drvdata = dev_get_drvdata(&adev->dev);
coresight_unregister(drvdata->csdev);
stm_unregister_device(&drvdata->stm);
-
- return 0;
}
#ifdef CONFIG_PM
diff --git a/drivers/hwtracing/coresight/coresight-tmc-core.c b/drivers/hwtracing/coresight/coresight-tmc-core.c
index 8169dff5a9f6..e29b3914fc0f 100644
--- a/drivers/hwtracing/coresight/coresight-tmc-core.c
+++ b/drivers/hwtracing/coresight/coresight-tmc-core.c
@@ -559,7 +559,7 @@ static void tmc_shutdown(struct amba_device *adev)
spin_unlock_irqrestore(&drvdata->spinlock, flags);
}
-static int tmc_remove(struct amba_device *adev)
+static void tmc_remove(struct amba_device *adev)
{
struct tmc_drvdata *drvdata = dev_get_drvdata(&adev->dev);
@@ -570,8 +570,6 @@ static int tmc_remove(struct amba_device *adev)
*/
misc_deregister(&drvdata->miscdev);
coresight_unregister(drvdata->csdev);
-
- return 0;
}
static const struct amba_id tmc_ids[] = {
diff --git a/drivers/hwtracing/coresight/coresight-tpiu.c b/drivers/hwtracing/coresight/coresight-tpiu.c
index 5b35029461a0..0ca39d905d0b 100644
--- a/drivers/hwtracing/coresight/coresight-tpiu.c
+++ b/drivers/hwtracing/coresight/coresight-tpiu.c
@@ -173,13 +173,11 @@ static int tpiu_probe(struct amba_device *adev, const struct amba_id *id)
return PTR_ERR(drvdata->csdev);
}
-static int tpiu_remove(struct amba_device *adev)
+static void tpiu_remove(struct amba_device *adev)
{
struct tpiu_drvdata *drvdata = dev_get_drvdata(&adev->dev);
coresight_unregister(drvdata->csdev);
-
- return 0;
}
#ifdef CONFIG_PM
diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c
index d4b1b0865f67..a3363b20f168 100644
--- a/drivers/i2c/busses/i2c-nomadik.c
+++ b/drivers/i2c/busses/i2c-nomadik.c
@@ -1055,7 +1055,7 @@ static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id)
return ret;
}
-static int nmk_i2c_remove(struct amba_device *adev)
+static void nmk_i2c_remove(struct amba_device *adev)
{
struct resource *res = &adev->res;
struct nmk_i2c_dev *dev = amba_get_drvdata(adev);
@@ -1068,8 +1068,6 @@ static int nmk_i2c_remove(struct amba_device *adev)
i2c_clr_bit(dev->virtbase + I2C_CR, I2C_CR_PE);
clk_disable_unprepare(dev->clk);
release_mem_region(res->start, resource_size(res));
-
- return 0;
}
static struct i2c_vendor_data vendor_stn8815 = {
diff --git a/drivers/input/serio/ambakmi.c b/drivers/input/serio/ambakmi.c
index ecdeca147ed7..4408245b61d2 100644
--- a/drivers/input/serio/ambakmi.c
+++ b/drivers/input/serio/ambakmi.c
@@ -159,7 +159,7 @@ static int amba_kmi_probe(struct amba_device *dev,
return ret;
}
-static int amba_kmi_remove(struct amba_device *dev)
+static void amba_kmi_remove(struct amba_device *dev)
{
struct amba_kmi_port *kmi = amba_get_drvdata(dev);
@@ -168,7 +168,6 @@ static int amba_kmi_remove(struct amba_device *dev)
iounmap(kmi->base);
kfree(kmi);
amba_release_regions(dev);
- return 0;
}
static int __maybe_unused amba_kmi_resume(struct device *dev)
diff --git a/drivers/memory/pl172.c b/drivers/memory/pl172.c
index 575fadbffa30..9eb8cc7de494 100644
--- a/drivers/memory/pl172.c
+++ b/drivers/memory/pl172.c
@@ -273,14 +273,12 @@ static int pl172_probe(struct amba_device *adev, const struct amba_id *id)
return ret;
}
-static int pl172_remove(struct amba_device *adev)
+static void pl172_remove(struct amba_device *adev)
{
struct pl172_data *pl172 = amba_get_drvdata(adev);
clk_disable_unprepare(pl172->clk);
amba_release_regions(adev);
-
- return 0;
}
static const struct amba_id pl172_ids[] = {
diff --git a/drivers/memory/pl353-smc.c b/drivers/memory/pl353-smc.c
index cc01979780d8..b0b251bb207f 100644
--- a/drivers/memory/pl353-smc.c
+++ b/drivers/memory/pl353-smc.c
@@ -427,14 +427,12 @@ static int pl353_smc_probe(struct amba_device *adev, const struct amba_id *id)
return err;
}
-static int pl353_smc_remove(struct amba_device *adev)
+static void pl353_smc_remove(struct amba_device *adev)
{
struct pl353_smc_data *pl353_smc = amba_get_drvdata(adev);
clk_disable_unprepare(pl353_smc->memclk);
clk_disable_unprepare(pl353_smc->aclk);
-
- return 0;
}
static const struct amba_id pl353_ids[] = {
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 9bde0def114b..b5684e5d79e6 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -2203,7 +2203,7 @@ static int mmci_probe(struct amba_device *dev,
return ret;
}
-static int mmci_remove(struct amba_device *dev)
+static void mmci_remove(struct amba_device *dev)
{
struct mmc_host *mmc = amba_get_drvdata(dev);
@@ -2231,8 +2231,6 @@ static int mmci_remove(struct amba_device *dev)
clk_disable_unprepare(host->clk);
mmc_free_host(mmc);
}
-
- return 0;
}
#ifdef CONFIG_PM
diff --git a/drivers/rtc/rtc-pl030.c b/drivers/rtc/rtc-pl030.c
index ebe03eba8f5f..87c93843d62a 100644
--- a/drivers/rtc/rtc-pl030.c
+++ b/drivers/rtc/rtc-pl030.c
@@ -137,7 +137,7 @@ static int pl030_probe(struct amba_device *dev, const struct amba_id *id)
return ret;
}
-static int pl030_remove(struct amba_device *dev)
+static void pl030_remove(struct amba_device *dev)
{
struct pl030_rtc *rtc = amba_get_drvdata(dev);
@@ -146,8 +146,6 @@ static int pl030_remove(struct amba_device *dev)
free_irq(dev->irq[0], rtc);
iounmap(rtc->base);
amba_release_regions(dev);
-
- return 0;
}
static struct amba_id pl030_ids[] = {
diff --git a/drivers/rtc/rtc-pl031.c b/drivers/rtc/rtc-pl031.c
index d4b2ab786126..2f5581ea26fe 100644
--- a/drivers/rtc/rtc-pl031.c
+++ b/drivers/rtc/rtc-pl031.c
@@ -280,7 +280,7 @@ static int pl031_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
return 0;
}
-static int pl031_remove(struct amba_device *adev)
+static void pl031_remove(struct amba_device *adev)
{
struct pl031_local *ldata = dev_get_drvdata(&adev->dev);
@@ -289,8 +289,6 @@ static int pl031_remove(struct amba_device *adev)
if (adev->irq[0])
free_irq(adev->irq[0], ldata);
amba_release_regions(adev);
-
- return 0;
}
static int pl031_probe(struct amba_device *adev, const struct amba_id *id)
diff --git a/drivers/spi/spi-pl022.c b/drivers/spi/spi-pl022.c
index e4ee8b084799..f7603c209e9d 100644
--- a/drivers/spi/spi-pl022.c
+++ b/drivers/spi/spi-pl022.c
@@ -2315,13 +2315,13 @@ static int pl022_probe(struct amba_device *adev, const struct amba_id *id)
return status;
}
-static int
+static void
pl022_remove(struct amba_device *adev)
{
struct pl022 *pl022 = amba_get_drvdata(adev);
if (!pl022)
- return 0;
+ return;
/*
* undo pm_runtime_put() in probe. I assume that we're not
@@ -2336,7 +2336,6 @@ pl022_remove(struct amba_device *adev)
clk_disable_unprepare(pl022->clk);
amba_release_regions(adev);
tasklet_disable(&pl022->pump_transfers);
- return 0;
}
#ifdef CONFIG_PM_SLEEP
diff --git a/drivers/tty/serial/amba-pl010.c b/drivers/tty/serial/amba-pl010.c
index 75d61e038a77..e538d6d75155 100644
--- a/drivers/tty/serial/amba-pl010.c
+++ b/drivers/tty/serial/amba-pl010.c
@@ -751,7 +751,7 @@ static int pl010_probe(struct amba_device *dev, const struct amba_id *id)
return ret;
}
-static int pl010_remove(struct amba_device *dev)
+static void pl010_remove(struct amba_device *dev)
{
struct uart_amba_port *uap = amba_get_drvdata(dev);
int i;
@@ -767,8 +767,6 @@ static int pl010_remove(struct amba_device *dev)
if (!busy)
uart_unregister_driver(&amba_reg);
-
- return 0;
}
#ifdef CONFIG_PM_SLEEP
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 61183e7ff009..07b19e97f850 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -2658,13 +2658,12 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id)
return pl011_register_port(uap);
}
-static int pl011_remove(struct amba_device *dev)
+static void pl011_remove(struct amba_device *dev)
{
struct uart_amba_port *uap = amba_get_drvdata(dev);
uart_remove_one_port(&amba_reg, &uap->port);
pl011_unregister_port(uap);
- return 0;
}
#ifdef CONFIG_PM_SLEEP
diff --git a/drivers/vfio/platform/vfio_amba.c b/drivers/vfio/platform/vfio_amba.c
index 7b3ebf1558e1..3626c2150101 100644
--- a/drivers/vfio/platform/vfio_amba.c
+++ b/drivers/vfio/platform/vfio_amba.c
@@ -71,14 +71,13 @@ static int vfio_amba_probe(struct amba_device *adev, const struct amba_id *id)
return ret;
}
-static int vfio_amba_remove(struct amba_device *adev)
+static void vfio_amba_remove(struct amba_device *adev)
{
struct vfio_platform_device *vdev =
vfio_platform_remove_common(&adev->dev);
kfree(vdev->name);
kfree(vdev);
- return 0;
}
static const struct amba_id pl330_ids[] = {
diff --git a/drivers/video/fbdev/amba-clcd.c b/drivers/video/fbdev/amba-clcd.c
index b7682de412d8..33595cc4778e 100644
--- a/drivers/video/fbdev/amba-clcd.c
+++ b/drivers/video/fbdev/amba-clcd.c
@@ -925,7 +925,7 @@ static int clcdfb_probe(struct amba_device *dev, const struct amba_id *id)
return ret;
}
-static int clcdfb_remove(struct amba_device *dev)
+static void clcdfb_remove(struct amba_device *dev)
{
struct clcd_fb *fb = amba_get_drvdata(dev);
@@ -942,8 +942,6 @@ static int clcdfb_remove(struct amba_device *dev)
kfree(fb);
amba_release_regions(dev);
-
- return 0;
}
static const struct amba_id clcdfb_id_table[] = {
diff --git a/drivers/watchdog/sp805_wdt.c b/drivers/watchdog/sp805_wdt.c
index 190d26e2e75f..2815f78d22bb 100644
--- a/drivers/watchdog/sp805_wdt.c
+++ b/drivers/watchdog/sp805_wdt.c
@@ -304,14 +304,12 @@ sp805_wdt_probe(struct amba_device *adev, const struct amba_id *id)
return ret;
}
-static int sp805_wdt_remove(struct amba_device *adev)
+static void sp805_wdt_remove(struct amba_device *adev)
{
struct sp805_wdt *wdt = amba_get_drvdata(adev);
watchdog_unregister_device(&wdt->wdd);
watchdog_set_drvdata(&wdt->wdd, NULL);
-
- return 0;
}
static int __maybe_unused sp805_wdt_suspend(struct device *dev)
diff --git a/include/linux/amba/bus.h b/include/linux/amba/bus.h
index 0bbfd647f5c6..6cc93ab5b809 100644
--- a/include/linux/amba/bus.h
+++ b/include/linux/amba/bus.h
@@ -76,7 +76,7 @@ struct amba_device {
struct amba_driver {
struct device_driver drv;
int (*probe)(struct amba_device *, const struct amba_id *);
- int (*remove)(struct amba_device *);
+ void (*remove)(struct amba_device *);
void (*shutdown)(struct amba_device *);
const struct amba_id *id_table;
};
diff --git a/sound/arm/aaci.c b/sound/arm/aaci.c
index a0996c47e58f..b326a5f5f0d5 100644
--- a/sound/arm/aaci.c
+++ b/sound/arm/aaci.c
@@ -1055,7 +1055,7 @@ static int aaci_probe(struct amba_device *dev,
return ret;
}
-static int aaci_remove(struct amba_device *dev)
+static void aaci_remove(struct amba_device *dev)
{
struct snd_card *card = amba_get_drvdata(dev);
@@ -1066,8 +1066,6 @@ static int aaci_remove(struct amba_device *dev)
snd_card_free(card);
amba_release_regions(dev);
}
-
- return 0;
}
static struct amba_id aaci_ids[] = {
--
2.34.1
From: Andy Shevchenko <[email protected]>
[ Upstream commit 67ec6dd0b257bd81b4e9fcac89b29da72f6265e5 ]
The pci_get_slot() increases its reference count, the caller
must decrement the reference count by calling pci_dev_put().
Fixes: 90b9aacf912a ("serial: 8250_pci: add Intel Tangier support")
Fixes: f549e94effa1 ("serial: 8250_pci: add Intel Penwell ports")
Reported-by: Qing Wang <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
Depends-on: d9eda9bab237 ("serial: 8250_pci: Intel MID UART support to its own driver")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/tty/serial/8250/8250_mid.c | 19 +++++++++++++++----
1 file changed, 15 insertions(+), 4 deletions(-)
diff --git a/drivers/tty/serial/8250/8250_mid.c b/drivers/tty/serial/8250/8250_mid.c
index efa0515139f8..e6c1791609dd 100644
--- a/drivers/tty/serial/8250/8250_mid.c
+++ b/drivers/tty/serial/8250/8250_mid.c
@@ -73,6 +73,11 @@ static int pnw_setup(struct mid8250 *mid, struct uart_port *p)
return 0;
}
+static void pnw_exit(struct mid8250 *mid)
+{
+ pci_dev_put(mid->dma_dev);
+}
+
static int tng_handle_irq(struct uart_port *p)
{
struct mid8250 *mid = p->private_data;
@@ -124,6 +129,11 @@ static int tng_setup(struct mid8250 *mid, struct uart_port *p)
return 0;
}
+static void tng_exit(struct mid8250 *mid)
+{
+ pci_dev_put(mid->dma_dev);
+}
+
static int dnv_handle_irq(struct uart_port *p)
{
struct mid8250 *mid = p->private_data;
@@ -330,9 +340,9 @@ static int mid8250_probe(struct pci_dev *pdev, const struct pci_device_id *id)
pci_set_drvdata(pdev, mid);
return 0;
+
err:
- if (mid->board->exit)
- mid->board->exit(mid);
+ mid->board->exit(mid);
return ret;
}
@@ -342,8 +352,7 @@ static void mid8250_remove(struct pci_dev *pdev)
serial8250_unregister_port(mid->line);
- if (mid->board->exit)
- mid->board->exit(mid);
+ mid->board->exit(mid);
}
static const struct mid8250_board pnw_board = {
@@ -351,6 +360,7 @@ static const struct mid8250_board pnw_board = {
.freq = 50000000,
.base_baud = 115200,
.setup = pnw_setup,
+ .exit = pnw_exit,
};
static const struct mid8250_board tng_board = {
@@ -358,6 +368,7 @@ static const struct mid8250_board tng_board = {
.freq = 38400000,
.base_baud = 1843200,
.setup = tng_setup,
+ .exit = tng_exit,
};
static const struct mid8250_board dnv_board = {
--
2.34.1
From: Tong Zhang <[email protected]>
[ Upstream commit a7e8de822e0b1979f08767c751f6c8a9c1d4ad86 ]
A bug can be triggered by following command
$ modprobe nd_pmem && modprobe -r nd_pmem
[ 10.060014] BUG dax_cache (Not tainted): Objects remaining in dax_cache on __kmem_cache_shutdown()
[ 10.060938] Slab 0x0000000085b729ac objects=9 used=1 fp=0x000000004f5ae469 flags=0x200000000010200(slab|head|node)
[ 10.062433] Call Trace:
[ 10.062673] dump_stack_lvl+0x34/0x44
[ 10.062865] slab_err+0x90/0xd0
[ 10.063619] __kmem_cache_shutdown+0x13b/0x2f0
[ 10.063848] kmem_cache_destroy+0x4a/0x110
[ 10.064058] __x64_sys_delete_module+0x265/0x300
This is caused by dax_fs_exit() not flushing inodes before destroy cache.
To fix this issue, call rcu_barrier() before destroy cache.
Signed-off-by: Tong Zhang <[email protected]>
Reviewed-by: Ira Weiny <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Fixes: 7b6be8444e0f ("dax: refactor dax-fs into a generic provider of 'struct dax_device' instances")
Signed-off-by: Dan Williams <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/dax/super.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/dax/super.c b/drivers/dax/super.c
index cadbd0a1a1ef..260a247c60d2 100644
--- a/drivers/dax/super.c
+++ b/drivers/dax/super.c
@@ -723,6 +723,7 @@ static int dax_fs_init(void)
static void dax_fs_exit(void)
{
kern_unmount(dax_mnt);
+ rcu_barrier();
kmem_cache_destroy(dax_cache);
}
--
2.34.1
From: Hangbin Liu <[email protected]>
[ Upstream commit ec80906b0fbd7be11e3e960813b977b1ffe5f8fe ]
When test_lirc_mode2_user exec failed, the test report failed but still
exit with 0. Fix it by exiting with an error code.
Another issue is for the LIRCDEV checking. With bash -n, we need to quote
the variable, or it will always be true. So if test_lirc_mode2_user was
not run, just exit with skip code.
Fixes: 6bdd533cee9a ("bpf: add selftest for lirc_mode2 type program")
Signed-off-by: Hangbin Liu <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/bpf/test_lirc_mode2.sh | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/tools/testing/selftests/bpf/test_lirc_mode2.sh b/tools/testing/selftests/bpf/test_lirc_mode2.sh
index ec4e15948e40..5252b91f48a1 100755
--- a/tools/testing/selftests/bpf/test_lirc_mode2.sh
+++ b/tools/testing/selftests/bpf/test_lirc_mode2.sh
@@ -3,6 +3,7 @@
# Kselftest framework requirement - SKIP code is 4.
ksft_skip=4
+ret=$ksft_skip
msg="skip all tests:"
if [ $UID != 0 ]; then
@@ -25,7 +26,7 @@ do
fi
done
-if [ -n $LIRCDEV ];
+if [ -n "$LIRCDEV" ];
then
TYPE=lirc_mode2
./test_lirc_mode2_user $LIRCDEV $INPUTDEV
@@ -36,3 +37,5 @@ then
echo -e ${GREEN}"PASS: $TYPE"${NC}
fi
fi
+
+exit $ret
--
2.34.1
From: Jing Yao <[email protected]>
[ Upstream commit c07a039cbb96748f54c02995bae8131cc9a73b0a ]
Use sysfs_emit instead of scnprintf, snprintf or sprintf.
Reported-by: Zeal Robot <[email protected]>
Signed-off-by: Jing Yao <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../video/fbdev/omap2/omapfb/displays/panel-tpo-td043mtea1.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/video/fbdev/omap2/omapfb/displays/panel-tpo-td043mtea1.c b/drivers/video/fbdev/omap2/omapfb/displays/panel-tpo-td043mtea1.c
index bb85b21f0724..9f6ef9e04d9c 100644
--- a/drivers/video/fbdev/omap2/omapfb/displays/panel-tpo-td043mtea1.c
+++ b/drivers/video/fbdev/omap2/omapfb/displays/panel-tpo-td043mtea1.c
@@ -169,7 +169,7 @@ static ssize_t tpo_td043_vmirror_show(struct device *dev,
{
struct panel_drv_data *ddata = dev_get_drvdata(dev);
- return snprintf(buf, PAGE_SIZE, "%d\n", ddata->vmirror);
+ return sysfs_emit(buf, "%d\n", ddata->vmirror);
}
static ssize_t tpo_td043_vmirror_store(struct device *dev,
@@ -199,7 +199,7 @@ static ssize_t tpo_td043_mode_show(struct device *dev,
{
struct panel_drv_data *ddata = dev_get_drvdata(dev);
- return snprintf(buf, PAGE_SIZE, "%d\n", ddata->mode);
+ return sysfs_emit(buf, "%d\n", ddata->mode);
}
static ssize_t tpo_td043_mode_store(struct device *dev,
--
2.34.1
From: Chao Yu <[email protected]>
[ Upstream commit 7d19e3dab0002e527052b0aaf986e8c32e5537bf ]
It needs to assign sbi->gc_mode with GC_IDLE_AT rather than GC_AT when
user tries to enable ATGC via gc_idle sysfs interface, fix it.
Fixes: 093749e296e2 ("f2fs: support age threshold based garbage collection")
Cc: Zhipeng Tan <[email protected]>
Signed-off-by: Jicheng Shao <[email protected]>
Signed-off-by: Chao Yu <[email protected]>
Signed-off-by: Jaegeuk Kim <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/f2fs/sysfs.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/f2fs/sysfs.c b/fs/f2fs/sysfs.c
index 7ffd4bb398b0..a7e7d68256e0 100644
--- a/fs/f2fs/sysfs.c
+++ b/fs/f2fs/sysfs.c
@@ -386,7 +386,7 @@ static ssize_t __sbi_store(struct f2fs_attr *a,
} else if (t == GC_IDLE_AT) {
if (!sbi->am.atgc_enabled)
return -EINVAL;
- sbi->gc_mode = GC_AT;
+ sbi->gc_mode = GC_IDLE_AT;
} else {
sbi->gc_mode = GC_NORMAL;
}
--
2.34.1
From: Miaoqian Lin <[email protected]>
[ Upstream commit 740dc3e846537c3743da98bf106f376023fd085c ]
The device_node pointer is returned by of_parse_phandle() with refcount
incremented. We should use of_node_put() on it when done.
This function only calls of_node_put() in the regular path.
And it will cause refcount leak in error path.
Fixes: fdbcb3cba54b ("ASoC: atmel: machine driver for at91sam9x5-wm8731 boards")
Signed-off-by: Miaoqian Lin <[email protected]>
Reviewed-by: Codrin Ciubotariu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/atmel/sam9x5_wm8731.c | 13 +++++++------
1 file changed, 7 insertions(+), 6 deletions(-)
diff --git a/sound/soc/atmel/sam9x5_wm8731.c b/sound/soc/atmel/sam9x5_wm8731.c
index 7745250fd743..529604a06c53 100644
--- a/sound/soc/atmel/sam9x5_wm8731.c
+++ b/sound/soc/atmel/sam9x5_wm8731.c
@@ -142,7 +142,7 @@ static int sam9x5_wm8731_driver_probe(struct platform_device *pdev)
if (!cpu_np) {
dev_err(&pdev->dev, "atmel,ssc-controller node missing\n");
ret = -EINVAL;
- goto out;
+ goto out_put_codec_np;
}
dai->cpus->of_node = cpu_np;
dai->platforms->of_node = cpu_np;
@@ -153,12 +153,9 @@ static int sam9x5_wm8731_driver_probe(struct platform_device *pdev)
if (ret != 0) {
dev_err(&pdev->dev, "Failed to set SSC %d for audio: %d\n",
ret, priv->ssc_id);
- goto out;
+ goto out_put_cpu_np;
}
- of_node_put(codec_np);
- of_node_put(cpu_np);
-
ret = devm_snd_soc_register_card(&pdev->dev, card);
if (ret) {
dev_err(&pdev->dev, "Platform device allocation failed\n");
@@ -167,10 +164,14 @@ static int sam9x5_wm8731_driver_probe(struct platform_device *pdev)
dev_dbg(&pdev->dev, "%s ok\n", __func__);
- return ret;
+ goto out_put_cpu_np;
out_put_audio:
atmel_ssc_put_audio(priv->ssc_id);
+out_put_cpu_np:
+ of_node_put(cpu_np);
+out_put_codec_np:
+ of_node_put(codec_np);
out:
return ret;
}
--
2.34.1
From: Robert Hancock <[email protected]>
[ Upstream commit 1c5091fbe7e0d0804158200b7feac5123f7b4fbd ]
This driver did not set the MM2S Fs Multiplier Register to the proper
value for playback streams. This needs to be set to the sample rate to
MCLK multiplier, or random stream underflows can occur on the downstream
I2S transmitter.
Store the sysclk value provided via the set_sysclk callback and use that
in conjunction with the sample rate in the hw_params callback to calculate
the proper value to set for this register.
Fixes: 6f6c3c36f091 ("ASoC: xlnx: add pcm formatter platform driver")
Signed-off-by: Robert Hancock <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/xilinx/xlnx_formatter_pcm.c | 25 +++++++++++++++++++++++++
1 file changed, 25 insertions(+)
diff --git a/sound/soc/xilinx/xlnx_formatter_pcm.c b/sound/soc/xilinx/xlnx_formatter_pcm.c
index ce19a6058b27..5c4158069a5a 100644
--- a/sound/soc/xilinx/xlnx_formatter_pcm.c
+++ b/sound/soc/xilinx/xlnx_formatter_pcm.c
@@ -84,6 +84,7 @@ struct xlnx_pcm_drv_data {
struct snd_pcm_substream *play_stream;
struct snd_pcm_substream *capture_stream;
struct clk *axi_clk;
+ unsigned int sysclk;
};
/*
@@ -314,6 +315,15 @@ static irqreturn_t xlnx_s2mm_irq_handler(int irq, void *arg)
return IRQ_NONE;
}
+static int xlnx_formatter_set_sysclk(struct snd_soc_component *component,
+ int clk_id, int source, unsigned int freq, int dir)
+{
+ struct xlnx_pcm_drv_data *adata = dev_get_drvdata(component->dev);
+
+ adata->sysclk = freq;
+ return 0;
+}
+
static int xlnx_formatter_pcm_open(struct snd_soc_component *component,
struct snd_pcm_substream *substream)
{
@@ -450,11 +460,25 @@ static int xlnx_formatter_pcm_hw_params(struct snd_soc_component *component,
u64 size;
struct snd_pcm_runtime *runtime = substream->runtime;
struct xlnx_pcm_stream_param *stream_data = runtime->private_data;
+ struct xlnx_pcm_drv_data *adata = dev_get_drvdata(component->dev);
active_ch = params_channels(params);
if (active_ch > stream_data->ch_limit)
return -EINVAL;
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK &&
+ adata->sysclk) {
+ unsigned int mclk_fs = adata->sysclk / params_rate(params);
+
+ if (adata->sysclk % params_rate(params) != 0) {
+ dev_warn(component->dev, "sysclk %u not divisible by rate %u\n",
+ adata->sysclk, params_rate(params));
+ return -EINVAL;
+ }
+
+ writel(mclk_fs, stream_data->mmio + XLNX_AUD_FS_MULTIPLIER);
+ }
+
if (substream->stream == SNDRV_PCM_STREAM_CAPTURE &&
stream_data->xfer_mode == AES_TO_PCM) {
val = readl(stream_data->mmio + XLNX_AUD_STS);
@@ -552,6 +576,7 @@ static int xlnx_formatter_pcm_new(struct snd_soc_component *component,
static const struct snd_soc_component_driver xlnx_asoc_component = {
.name = DRV_NAME,
+ .set_sysclk = xlnx_formatter_set_sysclk,
.open = xlnx_formatter_pcm_open,
.close = xlnx_formatter_pcm_close,
.hw_params = xlnx_formatter_pcm_hw_params,
--
2.34.1
From: Jonathan Neuschäfer <[email protected]>
commit 603501c16431c56f74eaef1ee1390f60a30c2187 upstream.
The name "DS" is defined in arch/x86/um/shared/sysdep/ptrace_64.h,
which results in a compiler warning when build-testing on ARCH=um.
Rename this driver's "DS" macro to DSTR so avoid this collision.
Reported-by: kernel test robot <[email protected]>
Fixes: 3b588e43ee5c7 ("pinctrl: nuvoton: add NPCM7xx pinctrl and GPIO driver")
Signed-off-by: Jonathan Neuschäfer <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pinctrl/nuvoton/pinctrl-npcm7xx.c | 156 +++++++++++++++---------------
1 file changed, 78 insertions(+), 78 deletions(-)
--- a/drivers/pinctrl/nuvoton/pinctrl-npcm7xx.c
+++ b/drivers/pinctrl/nuvoton/pinctrl-npcm7xx.c
@@ -904,7 +904,7 @@ static struct npcm7xx_func npcm7xx_funcs
#define DRIVE_STRENGTH_HI_SHIFT 12
#define DRIVE_STRENGTH_MASK 0x0000FF00
-#define DS(lo, hi) (((lo) << DRIVE_STRENGTH_LO_SHIFT) | \
+#define DSTR(lo, hi) (((lo) << DRIVE_STRENGTH_LO_SHIFT) | \
((hi) << DRIVE_STRENGTH_HI_SHIFT))
#define DSLO(x) (((x) >> DRIVE_STRENGTH_LO_SHIFT) & 0xF)
#define DSHI(x) (((x) >> DRIVE_STRENGTH_HI_SHIFT) & 0xF)
@@ -924,31 +924,31 @@ struct npcm7xx_pincfg {
static const struct npcm7xx_pincfg pincfg[] = {
/* PIN FUNCTION 1 FUNCTION 2 FUNCTION 3 FLAGS */
NPCM7XX_PINCFG(0, iox1, MFSEL1, 30, none, NONE, 0, none, NONE, 0, 0),
- NPCM7XX_PINCFG(1, iox1, MFSEL1, 30, none, NONE, 0, none, NONE, 0, DS(8, 12)),
- NPCM7XX_PINCFG(2, iox1, MFSEL1, 30, none, NONE, 0, none, NONE, 0, DS(8, 12)),
+ NPCM7XX_PINCFG(1, iox1, MFSEL1, 30, none, NONE, 0, none, NONE, 0, DSTR(8, 12)),
+ NPCM7XX_PINCFG(2, iox1, MFSEL1, 30, none, NONE, 0, none, NONE, 0, DSTR(8, 12)),
NPCM7XX_PINCFG(3, iox1, MFSEL1, 30, none, NONE, 0, none, NONE, 0, 0),
NPCM7XX_PINCFG(4, iox2, MFSEL3, 14, smb1d, I2CSEGSEL, 7, none, NONE, 0, SLEW),
NPCM7XX_PINCFG(5, iox2, MFSEL3, 14, smb1d, I2CSEGSEL, 7, none, NONE, 0, SLEW),
NPCM7XX_PINCFG(6, iox2, MFSEL3, 14, smb2d, I2CSEGSEL, 10, none, NONE, 0, SLEW),
NPCM7XX_PINCFG(7, iox2, MFSEL3, 14, smb2d, I2CSEGSEL, 10, none, NONE, 0, SLEW),
- NPCM7XX_PINCFG(8, lkgpo1, FLOCKR1, 4, none, NONE, 0, none, NONE, 0, DS(8, 12)),
- NPCM7XX_PINCFG(9, lkgpo2, FLOCKR1, 8, none, NONE, 0, none, NONE, 0, DS(8, 12)),
- NPCM7XX_PINCFG(10, ioxh, MFSEL3, 18, none, NONE, 0, none, NONE, 0, DS(8, 12)),
- NPCM7XX_PINCFG(11, ioxh, MFSEL3, 18, none, NONE, 0, none, NONE, 0, DS(8, 12)),
+ NPCM7XX_PINCFG(8, lkgpo1, FLOCKR1, 4, none, NONE, 0, none, NONE, 0, DSTR(8, 12)),
+ NPCM7XX_PINCFG(9, lkgpo2, FLOCKR1, 8, none, NONE, 0, none, NONE, 0, DSTR(8, 12)),
+ NPCM7XX_PINCFG(10, ioxh, MFSEL3, 18, none, NONE, 0, none, NONE, 0, DSTR(8, 12)),
+ NPCM7XX_PINCFG(11, ioxh, MFSEL3, 18, none, NONE, 0, none, NONE, 0, DSTR(8, 12)),
NPCM7XX_PINCFG(12, gspi, MFSEL1, 24, smb5b, I2CSEGSEL, 19, none, NONE, 0, SLEW),
NPCM7XX_PINCFG(13, gspi, MFSEL1, 24, smb5b, I2CSEGSEL, 19, none, NONE, 0, SLEW),
NPCM7XX_PINCFG(14, gspi, MFSEL1, 24, smb5c, I2CSEGSEL, 20, none, NONE, 0, SLEW),
NPCM7XX_PINCFG(15, gspi, MFSEL1, 24, smb5c, I2CSEGSEL, 20, none, NONE, 0, SLEW),
- NPCM7XX_PINCFG(16, lkgpo0, FLOCKR1, 0, none, NONE, 0, none, NONE, 0, DS(8, 12)),
- NPCM7XX_PINCFG(17, pspi2, MFSEL3, 13, smb4den, I2CSEGSEL, 23, none, NONE, 0, DS(8, 12)),
- NPCM7XX_PINCFG(18, pspi2, MFSEL3, 13, smb4b, I2CSEGSEL, 14, none, NONE, 0, DS(8, 12)),
- NPCM7XX_PINCFG(19, pspi2, MFSEL3, 13, smb4b, I2CSEGSEL, 14, none, NONE, 0, DS(8, 12)),
+ NPCM7XX_PINCFG(16, lkgpo0, FLOCKR1, 0, none, NONE, 0, none, NONE, 0, DSTR(8, 12)),
+ NPCM7XX_PINCFG(17, pspi2, MFSEL3, 13, smb4den, I2CSEGSEL, 23, none, NONE, 0, DSTR(8, 12)),
+ NPCM7XX_PINCFG(18, pspi2, MFSEL3, 13, smb4b, I2CSEGSEL, 14, none, NONE, 0, DSTR(8, 12)),
+ NPCM7XX_PINCFG(19, pspi2, MFSEL3, 13, smb4b, I2CSEGSEL, 14, none, NONE, 0, DSTR(8, 12)),
NPCM7XX_PINCFG(20, smb4c, I2CSEGSEL, 15, smb15, MFSEL3, 8, none, NONE, 0, 0),
NPCM7XX_PINCFG(21, smb4c, I2CSEGSEL, 15, smb15, MFSEL3, 8, none, NONE, 0, 0),
NPCM7XX_PINCFG(22, smb4d, I2CSEGSEL, 16, smb14, MFSEL3, 7, none, NONE, 0, 0),
NPCM7XX_PINCFG(23, smb4d, I2CSEGSEL, 16, smb14, MFSEL3, 7, none, NONE, 0, 0),
- NPCM7XX_PINCFG(24, ioxh, MFSEL3, 18, none, NONE, 0, none, NONE, 0, DS(8, 12)),
- NPCM7XX_PINCFG(25, ioxh, MFSEL3, 18, none, NONE, 0, none, NONE, 0, DS(8, 12)),
+ NPCM7XX_PINCFG(24, ioxh, MFSEL3, 18, none, NONE, 0, none, NONE, 0, DSTR(8, 12)),
+ NPCM7XX_PINCFG(25, ioxh, MFSEL3, 18, none, NONE, 0, none, NONE, 0, DSTR(8, 12)),
NPCM7XX_PINCFG(26, smb5, MFSEL1, 2, none, NONE, 0, none, NONE, 0, 0),
NPCM7XX_PINCFG(27, smb5, MFSEL1, 2, none, NONE, 0, none, NONE, 0, 0),
NPCM7XX_PINCFG(28, smb4, MFSEL1, 1, none, NONE, 0, none, NONE, 0, 0),
@@ -964,12 +964,12 @@ static const struct npcm7xx_pincfg pincf
NPCM7XX_PINCFG(39, smb3b, I2CSEGSEL, 11, none, NONE, 0, none, NONE, 0, SLEW),
NPCM7XX_PINCFG(40, smb3b, I2CSEGSEL, 11, none, NONE, 0, none, NONE, 0, SLEW),
NPCM7XX_PINCFG(41, bmcuart0a, MFSEL1, 9, none, NONE, 0, none, NONE, 0, 0),
- NPCM7XX_PINCFG(42, bmcuart0a, MFSEL1, 9, none, NONE, 0, none, NONE, 0, DS(2, 4) | GPO),
+ NPCM7XX_PINCFG(42, bmcuart0a, MFSEL1, 9, none, NONE, 0, none, NONE, 0, DSTR(2, 4) | GPO),
NPCM7XX_PINCFG(43, uart1, MFSEL1, 10, jtag2, MFSEL4, 0, bmcuart1, MFSEL3, 24, 0),
NPCM7XX_PINCFG(44, uart1, MFSEL1, 10, jtag2, MFSEL4, 0, bmcuart1, MFSEL3, 24, 0),
NPCM7XX_PINCFG(45, uart1, MFSEL1, 10, jtag2, MFSEL4, 0, none, NONE, 0, 0),
- NPCM7XX_PINCFG(46, uart1, MFSEL1, 10, jtag2, MFSEL4, 0, none, NONE, 0, DS(2, 8)),
- NPCM7XX_PINCFG(47, uart1, MFSEL1, 10, jtag2, MFSEL4, 0, none, NONE, 0, DS(2, 8)),
+ NPCM7XX_PINCFG(46, uart1, MFSEL1, 10, jtag2, MFSEL4, 0, none, NONE, 0, DSTR(2, 8)),
+ NPCM7XX_PINCFG(47, uart1, MFSEL1, 10, jtag2, MFSEL4, 0, none, NONE, 0, DSTR(2, 8)),
NPCM7XX_PINCFG(48, uart2, MFSEL1, 11, bmcuart0b, MFSEL4, 1, none, NONE, 0, GPO),
NPCM7XX_PINCFG(49, uart2, MFSEL1, 11, bmcuart0b, MFSEL4, 1, none, NONE, 0, 0),
NPCM7XX_PINCFG(50, uart2, MFSEL1, 11, none, NONE, 0, none, NONE, 0, 0),
@@ -979,8 +979,8 @@ static const struct npcm7xx_pincfg pincf
NPCM7XX_PINCFG(54, uart2, MFSEL1, 11, none, NONE, 0, none, NONE, 0, 0),
NPCM7XX_PINCFG(55, uart2, MFSEL1, 11, none, NONE, 0, none, NONE, 0, 0),
NPCM7XX_PINCFG(56, r1err, MFSEL1, 12, none, NONE, 0, none, NONE, 0, 0),
- NPCM7XX_PINCFG(57, r1md, MFSEL1, 13, none, NONE, 0, none, NONE, 0, DS(2, 4)),
- NPCM7XX_PINCFG(58, r1md, MFSEL1, 13, none, NONE, 0, none, NONE, 0, DS(2, 4)),
+ NPCM7XX_PINCFG(57, r1md, MFSEL1, 13, none, NONE, 0, none, NONE, 0, DSTR(2, 4)),
+ NPCM7XX_PINCFG(58, r1md, MFSEL1, 13, none, NONE, 0, none, NONE, 0, DSTR(2, 4)),
NPCM7XX_PINCFG(59, smb3d, I2CSEGSEL, 13, none, NONE, 0, none, NONE, 0, 0),
NPCM7XX_PINCFG(60, smb3d, I2CSEGSEL, 13, none, NONE, 0, none, NONE, 0, 0),
NPCM7XX_PINCFG(61, uart1, MFSEL1, 10, none, NONE, 0, none, NONE, 0, GPO),
@@ -1003,19 +1003,19 @@ static const struct npcm7xx_pincfg pincf
NPCM7XX_PINCFG(77, fanin13, MFSEL2, 13, none, NONE, 0, none, NONE, 0, 0),
NPCM7XX_PINCFG(78, fanin14, MFSEL2, 14, none, NONE, 0, none, NONE, 0, 0),
NPCM7XX_PINCFG(79, fanin15, MFSEL2, 15, none, NONE, 0, none, NONE, 0, 0),
- NPCM7XX_PINCFG(80, pwm0, MFSEL2, 16, none, NONE, 0, none, NONE, 0, DS(4, 8)),
- NPCM7XX_PINCFG(81, pwm1, MFSEL2, 17, none, NONE, 0, none, NONE, 0, DS(4, 8)),
- NPCM7XX_PINCFG(82, pwm2, MFSEL2, 18, none, NONE, 0, none, NONE, 0, DS(4, 8)),
- NPCM7XX_PINCFG(83, pwm3, MFSEL2, 19, none, NONE, 0, none, NONE, 0, DS(4, 8)),
- NPCM7XX_PINCFG(84, r2, MFSEL1, 14, none, NONE, 0, none, NONE, 0, DS(8, 12) | SLEW),
- NPCM7XX_PINCFG(85, r2, MFSEL1, 14, none, NONE, 0, none, NONE, 0, DS(8, 12) | SLEW),
- NPCM7XX_PINCFG(86, r2, MFSEL1, 14, none, NONE, 0, none, NONE, 0, DS(8, 12) | SLEW),
+ NPCM7XX_PINCFG(80, pwm0, MFSEL2, 16, none, NONE, 0, none, NONE, 0, DSTR(4, 8)),
+ NPCM7XX_PINCFG(81, pwm1, MFSEL2, 17, none, NONE, 0, none, NONE, 0, DSTR(4, 8)),
+ NPCM7XX_PINCFG(82, pwm2, MFSEL2, 18, none, NONE, 0, none, NONE, 0, DSTR(4, 8)),
+ NPCM7XX_PINCFG(83, pwm3, MFSEL2, 19, none, NONE, 0, none, NONE, 0, DSTR(4, 8)),
+ NPCM7XX_PINCFG(84, r2, MFSEL1, 14, none, NONE, 0, none, NONE, 0, DSTR(8, 12) | SLEW),
+ NPCM7XX_PINCFG(85, r2, MFSEL1, 14, none, NONE, 0, none, NONE, 0, DSTR(8, 12) | SLEW),
+ NPCM7XX_PINCFG(86, r2, MFSEL1, 14, none, NONE, 0, none, NONE, 0, DSTR(8, 12) | SLEW),
NPCM7XX_PINCFG(87, r2, MFSEL1, 14, none, NONE, 0, none, NONE, 0, 0),
NPCM7XX_PINCFG(88, r2, MFSEL1, 14, none, NONE, 0, none, NONE, 0, 0),
NPCM7XX_PINCFG(89, r2, MFSEL1, 14, none, NONE, 0, none, NONE, 0, 0),
NPCM7XX_PINCFG(90, r2err, MFSEL1, 15, none, NONE, 0, none, NONE, 0, 0),
- NPCM7XX_PINCFG(91, r2md, MFSEL1, 16, none, NONE, 0, none, NONE, 0, DS(2, 4)),
- NPCM7XX_PINCFG(92, r2md, MFSEL1, 16, none, NONE, 0, none, NONE, 0, DS(2, 4)),
+ NPCM7XX_PINCFG(91, r2md, MFSEL1, 16, none, NONE, 0, none, NONE, 0, DSTR(2, 4)),
+ NPCM7XX_PINCFG(92, r2md, MFSEL1, 16, none, NONE, 0, none, NONE, 0, DSTR(2, 4)),
NPCM7XX_PINCFG(93, ga20kbc, MFSEL1, 17, smb5d, I2CSEGSEL, 21, none, NONE, 0, 0),
NPCM7XX_PINCFG(94, ga20kbc, MFSEL1, 17, smb5d, I2CSEGSEL, 21, none, NONE, 0, 0),
NPCM7XX_PINCFG(95, lpc, NONE, 0, espi, MFSEL4, 8, gpio, MFSEL1, 26, 0),
@@ -1061,34 +1061,34 @@ static const struct npcm7xx_pincfg pincf
NPCM7XX_PINCFG(133, smb10, MFSEL4, 13, none, NONE, 0, none, NONE, 0, 0),
NPCM7XX_PINCFG(134, smb11, MFSEL4, 14, none, NONE, 0, none, NONE, 0, 0),
NPCM7XX_PINCFG(135, smb11, MFSEL4, 14, none, NONE, 0, none, NONE, 0, 0),
- NPCM7XX_PINCFG(136, sd1, MFSEL3, 12, none, NONE, 0, none, NONE, 0, DS(8, 12) | SLEW),
- NPCM7XX_PINCFG(137, sd1, MFSEL3, 12, none, NONE, 0, none, NONE, 0, DS(8, 12) | SLEW),
- NPCM7XX_PINCFG(138, sd1, MFSEL3, 12, none, NONE, 0, none, NONE, 0, DS(8, 12) | SLEW),
- NPCM7XX_PINCFG(139, sd1, MFSEL3, 12, none, NONE, 0, none, NONE, 0, DS(8, 12) | SLEW),
- NPCM7XX_PINCFG(140, sd1, MFSEL3, 12, none, NONE, 0, none, NONE, 0, DS(8, 12) | SLEW),
+ NPCM7XX_PINCFG(136, sd1, MFSEL3, 12, none, NONE, 0, none, NONE, 0, DSTR(8, 12) | SLEW),
+ NPCM7XX_PINCFG(137, sd1, MFSEL3, 12, none, NONE, 0, none, NONE, 0, DSTR(8, 12) | SLEW),
+ NPCM7XX_PINCFG(138, sd1, MFSEL3, 12, none, NONE, 0, none, NONE, 0, DSTR(8, 12) | SLEW),
+ NPCM7XX_PINCFG(139, sd1, MFSEL3, 12, none, NONE, 0, none, NONE, 0, DSTR(8, 12) | SLEW),
+ NPCM7XX_PINCFG(140, sd1, MFSEL3, 12, none, NONE, 0, none, NONE, 0, DSTR(8, 12) | SLEW),
NPCM7XX_PINCFG(141, sd1, MFSEL3, 12, none, NONE, 0, none, NONE, 0, 0),
- NPCM7XX_PINCFG(142, sd1, MFSEL3, 12, none, NONE, 0, none, NONE, 0, DS(8, 12) | SLEW),
+ NPCM7XX_PINCFG(142, sd1, MFSEL3, 12, none, NONE, 0, none, NONE, 0, DSTR(8, 12) | SLEW),
NPCM7XX_PINCFG(143, sd1, MFSEL3, 12, sd1pwr, MFSEL4, 5, none, NONE, 0, 0),
- NPCM7XX_PINCFG(144, pwm4, MFSEL2, 20, none, NONE, 0, none, NONE, 0, DS(4, 8)),
- NPCM7XX_PINCFG(145, pwm5, MFSEL2, 21, none, NONE, 0, none, NONE, 0, DS(4, 8)),
- NPCM7XX_PINCFG(146, pwm6, MFSEL2, 22, none, NONE, 0, none, NONE, 0, DS(4, 8)),
- NPCM7XX_PINCFG(147, pwm7, MFSEL2, 23, none, NONE, 0, none, NONE, 0, DS(4, 8)),
- NPCM7XX_PINCFG(148, mmc8, MFSEL3, 11, none, NONE, 0, none, NONE, 0, DS(8, 12) | SLEW),
- NPCM7XX_PINCFG(149, mmc8, MFSEL3, 11, none, NONE, 0, none, NONE, 0, DS(8, 12) | SLEW),
- NPCM7XX_PINCFG(150, mmc8, MFSEL3, 11, none, NONE, 0, none, NONE, 0, DS(8, 12) | SLEW),
- NPCM7XX_PINCFG(151, mmc8, MFSEL3, 11, none, NONE, 0, none, NONE, 0, DS(8, 12) | SLEW),
- NPCM7XX_PINCFG(152, mmc, MFSEL3, 10, none, NONE, 0, none, NONE, 0, DS(8, 12) | SLEW),
+ NPCM7XX_PINCFG(144, pwm4, MFSEL2, 20, none, NONE, 0, none, NONE, 0, DSTR(4, 8)),
+ NPCM7XX_PINCFG(145, pwm5, MFSEL2, 21, none, NONE, 0, none, NONE, 0, DSTR(4, 8)),
+ NPCM7XX_PINCFG(146, pwm6, MFSEL2, 22, none, NONE, 0, none, NONE, 0, DSTR(4, 8)),
+ NPCM7XX_PINCFG(147, pwm7, MFSEL2, 23, none, NONE, 0, none, NONE, 0, DSTR(4, 8)),
+ NPCM7XX_PINCFG(148, mmc8, MFSEL3, 11, none, NONE, 0, none, NONE, 0, DSTR(8, 12) | SLEW),
+ NPCM7XX_PINCFG(149, mmc8, MFSEL3, 11, none, NONE, 0, none, NONE, 0, DSTR(8, 12) | SLEW),
+ NPCM7XX_PINCFG(150, mmc8, MFSEL3, 11, none, NONE, 0, none, NONE, 0, DSTR(8, 12) | SLEW),
+ NPCM7XX_PINCFG(151, mmc8, MFSEL3, 11, none, NONE, 0, none, NONE, 0, DSTR(8, 12) | SLEW),
+ NPCM7XX_PINCFG(152, mmc, MFSEL3, 10, none, NONE, 0, none, NONE, 0, DSTR(8, 12) | SLEW),
NPCM7XX_PINCFG(153, mmcwp, FLOCKR1, 24, none, NONE, 0, none, NONE, 0, 0), /* Z1/A1 */
- NPCM7XX_PINCFG(154, mmc, MFSEL3, 10, none, NONE, 0, none, NONE, 0, DS(8, 12) | SLEW),
+ NPCM7XX_PINCFG(154, mmc, MFSEL3, 10, none, NONE, 0, none, NONE, 0, DSTR(8, 12) | SLEW),
NPCM7XX_PINCFG(155, mmccd, MFSEL3, 25, mmcrst, MFSEL4, 6, none, NONE, 0, 0), /* Z1/A1 */
- NPCM7XX_PINCFG(156, mmc, MFSEL3, 10, none, NONE, 0, none, NONE, 0, DS(8, 12) | SLEW),
- NPCM7XX_PINCFG(157, mmc, MFSEL3, 10, none, NONE, 0, none, NONE, 0, DS(8, 12) | SLEW),
- NPCM7XX_PINCFG(158, mmc, MFSEL3, 10, none, NONE, 0, none, NONE, 0, DS(8, 12) | SLEW),
- NPCM7XX_PINCFG(159, mmc, MFSEL3, 10, none, NONE, 0, none, NONE, 0, DS(8, 12) | SLEW),
-
- NPCM7XX_PINCFG(160, clkout, MFSEL1, 21, none, NONE, 0, none, NONE, 0, DS(8, 12) | SLEW),
- NPCM7XX_PINCFG(161, lpc, NONE, 0, espi, MFSEL4, 8, gpio, MFSEL1, 26, DS(8, 12)),
- NPCM7XX_PINCFG(162, serirq, NONE, 0, gpio, MFSEL1, 31, none, NONE, 0, DS(8, 12)),
+ NPCM7XX_PINCFG(156, mmc, MFSEL3, 10, none, NONE, 0, none, NONE, 0, DSTR(8, 12) | SLEW),
+ NPCM7XX_PINCFG(157, mmc, MFSEL3, 10, none, NONE, 0, none, NONE, 0, DSTR(8, 12) | SLEW),
+ NPCM7XX_PINCFG(158, mmc, MFSEL3, 10, none, NONE, 0, none, NONE, 0, DSTR(8, 12) | SLEW),
+ NPCM7XX_PINCFG(159, mmc, MFSEL3, 10, none, NONE, 0, none, NONE, 0, DSTR(8, 12) | SLEW),
+
+ NPCM7XX_PINCFG(160, clkout, MFSEL1, 21, none, NONE, 0, none, NONE, 0, DSTR(8, 12) | SLEW),
+ NPCM7XX_PINCFG(161, lpc, NONE, 0, espi, MFSEL4, 8, gpio, MFSEL1, 26, DSTR(8, 12)),
+ NPCM7XX_PINCFG(162, serirq, NONE, 0, gpio, MFSEL1, 31, none, NONE, 0, DSTR(8, 12)),
NPCM7XX_PINCFG(163, lpc, NONE, 0, espi, MFSEL4, 8, gpio, MFSEL1, 26, 0),
NPCM7XX_PINCFG(164, lpc, NONE, 0, espi, MFSEL4, 8, gpio, MFSEL1, 26, SLEWLPC),
NPCM7XX_PINCFG(165, lpc, NONE, 0, espi, MFSEL4, 8, gpio, MFSEL1, 26, SLEWLPC),
@@ -1101,25 +1101,25 @@ static const struct npcm7xx_pincfg pincf
NPCM7XX_PINCFG(172, smb6, MFSEL3, 1, none, NONE, 0, none, NONE, 0, 0),
NPCM7XX_PINCFG(173, smb7, MFSEL3, 2, none, NONE, 0, none, NONE, 0, 0),
NPCM7XX_PINCFG(174, smb7, MFSEL3, 2, none, NONE, 0, none, NONE, 0, 0),
- NPCM7XX_PINCFG(175, pspi1, MFSEL3, 4, faninx, MFSEL3, 3, none, NONE, 0, DS(8, 12)),
- NPCM7XX_PINCFG(176, pspi1, MFSEL3, 4, faninx, MFSEL3, 3, none, NONE, 0, DS(8, 12)),
- NPCM7XX_PINCFG(177, pspi1, MFSEL3, 4, faninx, MFSEL3, 3, none, NONE, 0, DS(8, 12)),
- NPCM7XX_PINCFG(178, r1, MFSEL3, 9, none, NONE, 0, none, NONE, 0, DS(8, 12) | SLEW),
- NPCM7XX_PINCFG(179, r1, MFSEL3, 9, none, NONE, 0, none, NONE, 0, DS(8, 12) | SLEW),
- NPCM7XX_PINCFG(180, r1, MFSEL3, 9, none, NONE, 0, none, NONE, 0, DS(8, 12) | SLEW),
+ NPCM7XX_PINCFG(175, pspi1, MFSEL3, 4, faninx, MFSEL3, 3, none, NONE, 0, DSTR(8, 12)),
+ NPCM7XX_PINCFG(176, pspi1, MFSEL3, 4, faninx, MFSEL3, 3, none, NONE, 0, DSTR(8, 12)),
+ NPCM7XX_PINCFG(177, pspi1, MFSEL3, 4, faninx, MFSEL3, 3, none, NONE, 0, DSTR(8, 12)),
+ NPCM7XX_PINCFG(178, r1, MFSEL3, 9, none, NONE, 0, none, NONE, 0, DSTR(8, 12) | SLEW),
+ NPCM7XX_PINCFG(179, r1, MFSEL3, 9, none, NONE, 0, none, NONE, 0, DSTR(8, 12) | SLEW),
+ NPCM7XX_PINCFG(180, r1, MFSEL3, 9, none, NONE, 0, none, NONE, 0, DSTR(8, 12) | SLEW),
NPCM7XX_PINCFG(181, r1, MFSEL3, 9, none, NONE, 0, none, NONE, 0, 0),
NPCM7XX_PINCFG(182, r1, MFSEL3, 9, none, NONE, 0, none, NONE, 0, 0),
- NPCM7XX_PINCFG(183, spi3, MFSEL4, 16, none, NONE, 0, none, NONE, 0, DS(8, 12) | SLEW),
- NPCM7XX_PINCFG(184, spi3, MFSEL4, 16, none, NONE, 0, none, NONE, 0, DS(8, 12) | SLEW | GPO),
- NPCM7XX_PINCFG(185, spi3, MFSEL4, 16, none, NONE, 0, none, NONE, 0, DS(8, 12) | SLEW | GPO),
- NPCM7XX_PINCFG(186, spi3, MFSEL4, 16, none, NONE, 0, none, NONE, 0, DS(8, 12)),
- NPCM7XX_PINCFG(187, spi3cs1, MFSEL4, 17, none, NONE, 0, none, NONE, 0, DS(8, 12)),
- NPCM7XX_PINCFG(188, spi3quad, MFSEL4, 20, spi3cs2, MFSEL4, 18, none, NONE, 0, DS(8, 12) | SLEW),
- NPCM7XX_PINCFG(189, spi3quad, MFSEL4, 20, spi3cs3, MFSEL4, 19, none, NONE, 0, DS(8, 12) | SLEW),
- NPCM7XX_PINCFG(190, gpio, FLOCKR1, 20, nprd_smi, NONE, 0, none, NONE, 0, DS(2, 4)),
- NPCM7XX_PINCFG(191, none, NONE, 0, none, NONE, 0, none, NONE, 0, DS(8, 12)), /* XX */
+ NPCM7XX_PINCFG(183, spi3, MFSEL4, 16, none, NONE, 0, none, NONE, 0, DSTR(8, 12) | SLEW),
+ NPCM7XX_PINCFG(184, spi3, MFSEL4, 16, none, NONE, 0, none, NONE, 0, DSTR(8, 12) | SLEW | GPO),
+ NPCM7XX_PINCFG(185, spi3, MFSEL4, 16, none, NONE, 0, none, NONE, 0, DSTR(8, 12) | SLEW | GPO),
+ NPCM7XX_PINCFG(186, spi3, MFSEL4, 16, none, NONE, 0, none, NONE, 0, DSTR(8, 12)),
+ NPCM7XX_PINCFG(187, spi3cs1, MFSEL4, 17, none, NONE, 0, none, NONE, 0, DSTR(8, 12)),
+ NPCM7XX_PINCFG(188, spi3quad, MFSEL4, 20, spi3cs2, MFSEL4, 18, none, NONE, 0, DSTR(8, 12) | SLEW),
+ NPCM7XX_PINCFG(189, spi3quad, MFSEL4, 20, spi3cs3, MFSEL4, 19, none, NONE, 0, DSTR(8, 12) | SLEW),
+ NPCM7XX_PINCFG(190, gpio, FLOCKR1, 20, nprd_smi, NONE, 0, none, NONE, 0, DSTR(2, 4)),
+ NPCM7XX_PINCFG(191, none, NONE, 0, none, NONE, 0, none, NONE, 0, DSTR(8, 12)), /* XX */
- NPCM7XX_PINCFG(192, none, NONE, 0, none, NONE, 0, none, NONE, 0, DS(8, 12)), /* XX */
+ NPCM7XX_PINCFG(192, none, NONE, 0, none, NONE, 0, none, NONE, 0, DSTR(8, 12)), /* XX */
NPCM7XX_PINCFG(193, r1, MFSEL3, 9, none, NONE, 0, none, NONE, 0, 0),
NPCM7XX_PINCFG(194, smb0b, I2CSEGSEL, 0, none, NONE, 0, none, NONE, 0, 0),
NPCM7XX_PINCFG(195, smb0b, I2CSEGSEL, 0, none, NONE, 0, none, NONE, 0, 0),
@@ -1130,11 +1130,11 @@ static const struct npcm7xx_pincfg pincf
NPCM7XX_PINCFG(200, r2, MFSEL1, 14, none, NONE, 0, none, NONE, 0, 0),
NPCM7XX_PINCFG(201, r1, MFSEL3, 9, none, NONE, 0, none, NONE, 0, 0),
NPCM7XX_PINCFG(202, smb0c, I2CSEGSEL, 1, none, NONE, 0, none, NONE, 0, 0),
- NPCM7XX_PINCFG(203, faninx, MFSEL3, 3, none, NONE, 0, none, NONE, 0, DS(8, 12)),
+ NPCM7XX_PINCFG(203, faninx, MFSEL3, 3, none, NONE, 0, none, NONE, 0, DSTR(8, 12)),
NPCM7XX_PINCFG(204, ddc, NONE, 0, gpio, MFSEL3, 22, none, NONE, 0, SLEW),
NPCM7XX_PINCFG(205, ddc, NONE, 0, gpio, MFSEL3, 22, none, NONE, 0, SLEW),
- NPCM7XX_PINCFG(206, ddc, NONE, 0, gpio, MFSEL3, 22, none, NONE, 0, DS(4, 8)),
- NPCM7XX_PINCFG(207, ddc, NONE, 0, gpio, MFSEL3, 22, none, NONE, 0, DS(4, 8)),
+ NPCM7XX_PINCFG(206, ddc, NONE, 0, gpio, MFSEL3, 22, none, NONE, 0, DSTR(4, 8)),
+ NPCM7XX_PINCFG(207, ddc, NONE, 0, gpio, MFSEL3, 22, none, NONE, 0, DSTR(4, 8)),
NPCM7XX_PINCFG(208, rg2, MFSEL4, 24, ddr, MFSEL3, 26, none, NONE, 0, 0),
NPCM7XX_PINCFG(209, rg2, MFSEL4, 24, ddr, MFSEL3, 26, none, NONE, 0, 0),
NPCM7XX_PINCFG(210, rg2, MFSEL4, 24, ddr, MFSEL3, 26, none, NONE, 0, 0),
@@ -1146,20 +1146,20 @@ static const struct npcm7xx_pincfg pincf
NPCM7XX_PINCFG(216, rg2mdio, MFSEL4, 23, ddr, MFSEL3, 26, none, NONE, 0, 0),
NPCM7XX_PINCFG(217, rg2mdio, MFSEL4, 23, ddr, MFSEL3, 26, none, NONE, 0, 0),
NPCM7XX_PINCFG(218, wdog1, MFSEL3, 19, none, NONE, 0, none, NONE, 0, 0),
- NPCM7XX_PINCFG(219, wdog2, MFSEL3, 20, none, NONE, 0, none, NONE, 0, DS(4, 8)),
+ NPCM7XX_PINCFG(219, wdog2, MFSEL3, 20, none, NONE, 0, none, NONE, 0, DSTR(4, 8)),
NPCM7XX_PINCFG(220, smb12, MFSEL3, 5, none, NONE, 0, none, NONE, 0, 0),
NPCM7XX_PINCFG(221, smb12, MFSEL3, 5, none, NONE, 0, none, NONE, 0, 0),
NPCM7XX_PINCFG(222, smb13, MFSEL3, 6, none, NONE, 0, none, NONE, 0, 0),
NPCM7XX_PINCFG(223, smb13, MFSEL3, 6, none, NONE, 0, none, NONE, 0, 0),
NPCM7XX_PINCFG(224, spix, MFSEL4, 27, none, NONE, 0, none, NONE, 0, SLEW),
- NPCM7XX_PINCFG(225, spix, MFSEL4, 27, none, NONE, 0, none, NONE, 0, DS(8, 12) | SLEW | GPO),
- NPCM7XX_PINCFG(226, spix, MFSEL4, 27, none, NONE, 0, none, NONE, 0, DS(8, 12) | SLEW | GPO),
- NPCM7XX_PINCFG(227, spix, MFSEL4, 27, none, NONE, 0, none, NONE, 0, DS(8, 12) | SLEW),
- NPCM7XX_PINCFG(228, spixcs1, MFSEL4, 28, none, NONE, 0, none, NONE, 0, DS(8, 12) | SLEW),
- NPCM7XX_PINCFG(229, spix, MFSEL4, 27, none, NONE, 0, none, NONE, 0, DS(8, 12) | SLEW),
- NPCM7XX_PINCFG(230, spix, MFSEL4, 27, none, NONE, 0, none, NONE, 0, DS(8, 12) | SLEW),
- NPCM7XX_PINCFG(231, clkreq, MFSEL4, 9, none, NONE, 0, none, NONE, 0, DS(8, 12)),
+ NPCM7XX_PINCFG(225, spix, MFSEL4, 27, none, NONE, 0, none, NONE, 0, DSTR(8, 12) | SLEW | GPO),
+ NPCM7XX_PINCFG(226, spix, MFSEL4, 27, none, NONE, 0, none, NONE, 0, DSTR(8, 12) | SLEW | GPO),
+ NPCM7XX_PINCFG(227, spix, MFSEL4, 27, none, NONE, 0, none, NONE, 0, DSTR(8, 12) | SLEW),
+ NPCM7XX_PINCFG(228, spixcs1, MFSEL4, 28, none, NONE, 0, none, NONE, 0, DSTR(8, 12) | SLEW),
+ NPCM7XX_PINCFG(229, spix, MFSEL4, 27, none, NONE, 0, none, NONE, 0, DSTR(8, 12) | SLEW),
+ NPCM7XX_PINCFG(230, spix, MFSEL4, 27, none, NONE, 0, none, NONE, 0, DSTR(8, 12) | SLEW),
+ NPCM7XX_PINCFG(231, clkreq, MFSEL4, 9, none, NONE, 0, none, NONE, 0, DSTR(8, 12)),
NPCM7XX_PINCFG(253, none, NONE, 0, none, NONE, 0, none, NONE, 0, GPI), /* SDHC1 power */
NPCM7XX_PINCFG(254, none, NONE, 0, none, NONE, 0, none, NONE, 0, GPI), /* SDHC2 power */
NPCM7XX_PINCFG(255, none, NONE, 0, none, NONE, 0, none, NONE, 0, GPI), /* DACOSEL */
From: Chris Leech <[email protected]>
[ Upstream commit 841aee4d75f18fdfb53935080b03de0c65e9b92c ]
Put NVMe/TCP sockets in their own class to avoid some lockdep warnings.
Sockets created by nvme-tcp are not exposed to user-space, and will not
trigger certain code paths that the general socket API exposes.
Lockdep complains about a circular dependency between the socket and
filesystem locks, because setsockopt can trigger a page fault with a
socket lock held, but nvme-tcp sends requests on the socket while file
system locks are held.
======================================================
WARNING: possible circular locking dependency detected
5.15.0-rc3 #1 Not tainted
------------------------------------------------------
fio/1496 is trying to acquire lock:
(sk_lock-AF_INET){+.+.}-{0:0}, at: tcp_sendpage+0x23/0x80
but task is already holding lock:
(&xfs_dir_ilock_class/5){+.+.}-{3:3}, at: xfs_ilock+0xcf/0x290 [xfs]
which lock already depends on the new lock.
other info that might help us debug this:
chain exists of:
sk_lock-AF_INET --> sb_internal --> &xfs_dir_ilock_class/5
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&xfs_dir_ilock_class/5);
lock(sb_internal);
lock(&xfs_dir_ilock_class/5);
lock(sk_lock-AF_INET);
*** DEADLOCK ***
6 locks held by fio/1496:
#0: (sb_writers#13){.+.+}-{0:0}, at: path_openat+0x9fc/0xa20
#1: (&inode->i_sb->s_type->i_mutex_dir_key){++++}-{3:3}, at: path_openat+0x296/0xa20
#2: (sb_internal){.+.+}-{0:0}, at: xfs_trans_alloc_icreate+0x41/0xd0 [xfs]
#3: (&xfs_dir_ilock_class/5){+.+.}-{3:3}, at: xfs_ilock+0xcf/0x290 [xfs]
#4: (hctx->srcu){....}-{0:0}, at: hctx_lock+0x51/0xd0
#5: (&queue->send_mutex){+.+.}-{3:3}, at: nvme_tcp_queue_rq+0x33e/0x380 [nvme_tcp]
This annotation lets lockdep analyze nvme-tcp controlled sockets
independently of what the user-space sockets API does.
Link: https://lore.kernel.org/linux-nvme/CAHj4cs9MDYLJ+q+2_GXUK9HxFizv2pxUryUR0toX974M040z7g@mail.gmail.com/
Signed-off-by: Chris Leech <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/nvme/host/tcp.c | 40 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 40 insertions(+)
diff --git a/drivers/nvme/host/tcp.c b/drivers/nvme/host/tcp.c
index 6105894a218a..7e3932033707 100644
--- a/drivers/nvme/host/tcp.c
+++ b/drivers/nvme/host/tcp.c
@@ -30,6 +30,44 @@ static int so_priority;
module_param(so_priority, int, 0644);
MODULE_PARM_DESC(so_priority, "nvme tcp socket optimize priority");
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+/* lockdep can detect a circular dependency of the form
+ * sk_lock -> mmap_lock (page fault) -> fs locks -> sk_lock
+ * because dependencies are tracked for both nvme-tcp and user contexts. Using
+ * a separate class prevents lockdep from conflating nvme-tcp socket use with
+ * user-space socket API use.
+ */
+static struct lock_class_key nvme_tcp_sk_key[2];
+static struct lock_class_key nvme_tcp_slock_key[2];
+
+static void nvme_tcp_reclassify_socket(struct socket *sock)
+{
+ struct sock *sk = sock->sk;
+
+ if (WARN_ON_ONCE(!sock_allow_reclassification(sk)))
+ return;
+
+ switch (sk->sk_family) {
+ case AF_INET:
+ sock_lock_init_class_and_name(sk, "slock-AF_INET-NVME",
+ &nvme_tcp_slock_key[0],
+ "sk_lock-AF_INET-NVME",
+ &nvme_tcp_sk_key[0]);
+ break;
+ case AF_INET6:
+ sock_lock_init_class_and_name(sk, "slock-AF_INET6-NVME",
+ &nvme_tcp_slock_key[1],
+ "sk_lock-AF_INET6-NVME",
+ &nvme_tcp_sk_key[1]);
+ break;
+ default:
+ WARN_ON_ONCE(1);
+ }
+}
+#else
+static void nvme_tcp_reclassify_socket(struct socket *sock) { }
+#endif
+
enum nvme_tcp_send_state {
NVME_TCP_SEND_CMD_PDU = 0,
NVME_TCP_SEND_H2C_PDU,
@@ -1422,6 +1460,8 @@ static int nvme_tcp_alloc_queue(struct nvme_ctrl *nctrl,
goto err_destroy_mutex;
}
+ nvme_tcp_reclassify_socket(queue->sock);
+
/* Single syn retry */
tcp_sock_set_syncnt(queue->sock->sk, 1);
--
2.34.1
From: Hangyu Hua <[email protected]>
[ Upstream commit 3fd46e551f67f4303c3276a0d6cd20baf2d192c4 ]
mpc8xx_pic_init() should return -ENOMEM instead of 0 when
irq_domain_add_linear() return NULL. This cause mpc8xx_pics_init to continue
executing even if mpc8xx_pic_host is NULL.
Fixes: cc76404feaed ("powerpc/8xx: Fix possible device node reference leak")
Signed-off-by: Hangyu Hua <[email protected]>
Reviewed-by: Christophe Leroy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/platforms/8xx/pic.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/powerpc/platforms/8xx/pic.c b/arch/powerpc/platforms/8xx/pic.c
index f2ba837249d6..04a6abf14c29 100644
--- a/arch/powerpc/platforms/8xx/pic.c
+++ b/arch/powerpc/platforms/8xx/pic.c
@@ -153,6 +153,7 @@ int __init mpc8xx_pic_init(void)
if (mpc8xx_pic_host == NULL) {
printk(KERN_ERR "MPC8xx PIC: failed to allocate irq host!\n");
ret = -ENOMEM;
+ goto out;
}
ret = 0;
--
2.34.1
From: Quinn Tran <[email protected]>
commit c13ce47c64ea8f14e77eecb40d1e7c2ac667f898 upstream.
For N2N topology, ELS Passthrough is used to send PLOGI. On failure of ELS
pass through PLOGI, driver flipped over to using LLIOCB PLOGI for N2N. This
is not consistent. Delete the session to restart the connection where ELS
pass through PLOGI would be used consistently.
Link: https://lore.kernel.org/r/[email protected]
Fixes: c76ae845ea83 ("scsi: qla2xxx: Add error handling for PLOGI ELS passthrough")
Cc: [email protected]
Reviewed-by: Himanshu Madhani <[email protected]>
Signed-off-by: Quinn Tran <[email protected]>
Signed-off-by: Nilesh Javali <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/qla2xxx/qla_iocb.c | 8 +++-----
1 file changed, 3 insertions(+), 5 deletions(-)
--- a/drivers/scsi/qla2xxx/qla_iocb.c
+++ b/drivers/scsi/qla2xxx/qla_iocb.c
@@ -2910,6 +2910,7 @@ static void qla2x00_els_dcmd2_sp_done(sr
set_bit(ISP_ABORT_NEEDED,
&vha->dpc_flags);
qla2xxx_wake_dpc(vha);
+ break;
}
fallthrough;
default:
@@ -2919,9 +2920,7 @@ static void qla2x00_els_dcmd2_sp_done(sr
fw_status[0], fw_status[1], fw_status[2]);
fcport->flags &= ~FCF_ASYNC_SENT;
- qla2x00_set_fcport_disc_state(fcport,
- DSC_LOGIN_FAILED);
- set_bit(RELOGIN_NEEDED, &vha->dpc_flags);
+ qlt_schedule_sess_for_deletion(fcport);
break;
}
break;
@@ -2933,8 +2932,7 @@ static void qla2x00_els_dcmd2_sp_done(sr
fw_status[0], fw_status[1], fw_status[2]);
sp->fcport->flags &= ~FCF_ASYNC_SENT;
- qla2x00_set_fcport_disc_state(fcport, DSC_LOGIN_FAILED);
- set_bit(RELOGIN_NEEDED, &vha->dpc_flags);
+ qlt_schedule_sess_for_deletion(fcport);
break;
}
From: Matt Kramer <[email protected]>
[ Upstream commit ef248d9bd616b04df8be25539a4dc5db4b6c56f4 ]
This fixes the near-silence of the headphone jack on the ALC256-based
Samsung Galaxy Book Flex Alpha (NP730QCJ). The magic verbs were found
through trial and error, using known ALC298 hacks as inspiration. The
fixup is auto-enabled only when the NP730QCJ is detected. It can be
manually enabled using model=alc256-samsung-headphone.
Signed-off-by: Matt Kramer <[email protected]>
Link: https://lore.kernel.org/r/3168355.aeNJFYEL58@linus
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
Documentation/sound/hd-audio/models.rst | 4 ++++
sound/pci/hda/patch_realtek.c | 11 +++++++++++
2 files changed, 15 insertions(+)
diff --git a/Documentation/sound/hd-audio/models.rst b/Documentation/sound/hd-audio/models.rst
index d25335993e55..9b52f50a6854 100644
--- a/Documentation/sound/hd-audio/models.rst
+++ b/Documentation/sound/hd-audio/models.rst
@@ -261,6 +261,10 @@ alc-sense-combo
huawei-mbx-stereo
Enable initialization verbs for Huawei MBX stereo speakers;
might be risky, try this at your own risk
+alc298-samsung-headphone
+ Samsung laptops with ALC298
+alc256-samsung-headphone
+ Samsung laptops with ALC256
ALC66x/67x/892
==============
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 54e56caa0d95..b886326ce9b9 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -6762,6 +6762,7 @@ enum {
ALC236_FIXUP_HP_MUTE_LED,
ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF,
ALC298_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET,
+ ALC256_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET,
ALC295_FIXUP_ASUS_MIC_NO_PRESENCE,
ALC269VC_FIXUP_ACER_VCOPPERBOX_PINS,
ALC269VC_FIXUP_ACER_HEADSET_MIC,
@@ -8083,6 +8084,14 @@ static const struct hda_fixup alc269_fixups[] = {
{ }
},
},
+ [ALC256_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET] = {
+ .type = HDA_FIXUP_VERBS,
+ .v.verbs = (const struct hda_verb[]) {
+ { 0x20, AC_VERB_SET_COEF_INDEX, 0x08},
+ { 0x20, AC_VERB_SET_PROC_COEF, 0x2fcf},
+ { }
+ },
+ },
[ALC295_FIXUP_ASUS_MIC_NO_PRESENCE] = {
.type = HDA_FIXUP_PINS,
.v.pins = (const struct hda_pintbl[]) {
@@ -8835,6 +8844,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = {
SND_PCI_QUIRK(0x144d, 0xc740, "Samsung Ativ book 8 (NP870Z5G)", ALC269_FIXUP_ATIV_BOOK_8),
SND_PCI_QUIRK(0x144d, 0xc812, "Samsung Notebook Pen S (NT950SBE-X58)", ALC298_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET),
SND_PCI_QUIRK(0x144d, 0xc830, "Samsung Galaxy Book Ion (NT950XCJ-X716A)", ALC298_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET),
+ SND_PCI_QUIRK(0x144d, 0xc832, "Samsung Galaxy Book Flex Alpha (NP730QCJ)", ALC256_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET),
SND_PCI_QUIRK(0x1458, 0xfa53, "Gigabyte BXBT-2807", ALC283_FIXUP_HEADSET_MIC),
SND_PCI_QUIRK(0x1462, 0xb120, "MSI Cubi MS-B120", ALC283_FIXUP_HEADSET_MIC),
SND_PCI_QUIRK(0x1462, 0xb171, "Cubi N 8GL (MS-B171)", ALC283_FIXUP_HEADSET_MIC),
@@ -9177,6 +9187,7 @@ static const struct hda_model_fixup alc269_fixup_models[] = {
{.id = ALC298_FIXUP_HUAWEI_MBX_STEREO, .name = "huawei-mbx-stereo"},
{.id = ALC256_FIXUP_MEDION_HEADSET_NO_PRESENCE, .name = "alc256-medion-headset"},
{.id = ALC298_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET, .name = "alc298-samsung-headphone"},
+ {.id = ALC256_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET, .name = "alc256-samsung-headphone"},
{.id = ALC255_FIXUP_XIAOMI_HEADSET_MIC, .name = "alc255-xiaomi-headset"},
{.id = ALC274_FIXUP_HP_MIC, .name = "alc274-hp-mic-detect"},
{.id = ALC245_FIXUP_HP_X360_AMP, .name = "alc245-hp-x360-amp"},
--
2.34.1
From: Souptick Joarder (HPE) <[email protected]>
[ Upstream commit e414c25e3399b2b3d7337dc47abccab5c71b7c8f ]
smatch warning was reported as below ->
smatch warnings:
drivers/irqchip/irq-nvic.c:131 nvic_of_init()
warn: 'nvic_base' not released on lines: 97.
Release nvic_base upon failure.
Reported-by: kernel test robot <[email protected]>
Reported-by: Dan Carpenter <[email protected]>
Signed-off-by: Souptick Joarder (HPE) <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/irqchip/irq-nvic.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/irqchip/irq-nvic.c b/drivers/irqchip/irq-nvic.c
index 21cb31ff2bbf..e903c44edb64 100644
--- a/drivers/irqchip/irq-nvic.c
+++ b/drivers/irqchip/irq-nvic.c
@@ -94,6 +94,7 @@ static int __init nvic_of_init(struct device_node *node,
if (!nvic_irq_domain) {
pr_warn("Failed to allocate irq domain\n");
+ iounmap(nvic_base);
return -ENOMEM;
}
@@ -103,6 +104,7 @@ static int __init nvic_of_init(struct device_node *node,
if (ret) {
pr_warn("Failed to allocate irq chips\n");
irq_domain_remove(nvic_irq_domain);
+ iounmap(nvic_base);
return ret;
}
--
2.34.1
From: Jeremy Linton <[email protected]>
[ Upstream commit 8d3ea3d402db94b61075617e71b67459a714a502 ]
GCC12 appears to be much smarter about its dependency tracking and is
aware that the relaxed variants are just normal loads and stores and
this is causing problems like:
[ 210.074549] ------------[ cut here ]------------
[ 210.079223] NETDEV WATCHDOG: enabcm6e4ei0 (bcmgenet): transmit queue 1 timed out
[ 210.086717] WARNING: CPU: 1 PID: 0 at net/sched/sch_generic.c:529 dev_watchdog+0x234/0x240
[ 210.095044] Modules linked in: genet(E) nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat]
[ 210.146561] ACPI CPPC: PCC check channel failed for ss: 0. ret=-110
[ 210.146927] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G E 5.17.0-rc7G12+ #58
[ 210.153226] CPPC Cpufreq:cppc_scale_freq_workfn: failed to read perf counters
[ 210.161349] Hardware name: Raspberry Pi Foundation Raspberry Pi 4 Model B/Raspberry Pi 4 Model B, BIOS EDK2-DEV 02/08/2022
[ 210.161353] pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 210.161358] pc : dev_watchdog+0x234/0x240
[ 210.161364] lr : dev_watchdog+0x234/0x240
[ 210.161368] sp : ffff8000080a3a40
[ 210.161370] x29: ffff8000080a3a40 x28: ffffcd425af87000 x27: ffff8000080a3b20
[ 210.205150] x26: ffffcd425aa00000 x25: 0000000000000001 x24: ffffcd425af8ec08
[ 210.212321] x23: 0000000000000100 x22: ffffcd425af87000 x21: ffff55b142688000
[ 210.219491] x20: 0000000000000001 x19: ffff55b1426884c8 x18: ffffffffffffffff
[ 210.226661] x17: 64656d6974203120 x16: 0000000000000001 x15: 6d736e617274203a
[ 210.233831] x14: 2974656e65676d63 x13: ffffcd4259c300d8 x12: ffffcd425b07d5f0
[ 210.241001] x11: 00000000ffffffff x10: ffffcd425b07d5f0 x9 : ffffcd4258bdad9c
[ 210.248171] x8 : 00000000ffffdfff x7 : 000000000000003f x6 : 0000000000000000
[ 210.255341] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000001000
[ 210.262511] x2 : 0000000000001000 x1 : 0000000000000005 x0 : 0000000000000044
[ 210.269682] Call trace:
[ 210.272133] dev_watchdog+0x234/0x240
[ 210.275811] call_timer_fn+0x3c/0x15c
[ 210.279489] __run_timers.part.0+0x288/0x310
[ 210.283777] run_timer_softirq+0x48/0x80
[ 210.287716] __do_softirq+0x128/0x360
[ 210.291392] __irq_exit_rcu+0x138/0x140
[ 210.295243] irq_exit_rcu+0x1c/0x30
[ 210.298745] el1_interrupt+0x38/0x54
[ 210.302334] el1h_64_irq_handler+0x18/0x24
[ 210.306445] el1h_64_irq+0x7c/0x80
[ 210.309857] arch_cpu_idle+0x18/0x2c
[ 210.313445] default_idle_call+0x4c/0x140
[ 210.317470] cpuidle_idle_call+0x14c/0x1a0
[ 210.321584] do_idle+0xb0/0x100
[ 210.324737] cpu_startup_entry+0x30/0x8c
[ 210.328675] secondary_start_kernel+0xe4/0x110
[ 210.333138] __secondary_switched+0x94/0x98
The assumption when these were relaxed seems to be that device memory
would be mapped non reordering, and that other constructs
(spinlocks/etc) would provide the barriers to assure that packet data
and in memory rings/queues were ordered with respect to device
register reads/writes. This itself seems a bit sketchy, but the real
problem with GCC12 is that it is moving the actual reads/writes around
at will as though they were independent operations when in truth they
are not, but the compiler can't know that. When looking at the
assembly dumps for many of these routines its possible to see very
clean, but not strictly in program order operations occurring as the
compiler would be free to do if these weren't actually register
reads/write operations.
Its possible to suppress the timeout with a liberal bit of dma_mb()'s
sprinkled around but the device still seems unable to reliably
send/receive data. A better plan is to use the safer readl/writel
everywhere.
Since this partially reverts an older commit, which notes the use of
the relaxed variants for performance reasons. I would suggest that
any performance problems with this commit are targeted at relaxing only
the performance critical code paths after assuring proper barriers.
Fixes: 69d2ea9c79898 ("net: bcmgenet: Use correct I/O accessors")
Reported-by: Peter Robinson <[email protected]>
Signed-off-by: Jeremy Linton <[email protected]>
Acked-by: Peter Robinson <[email protected]>
Tested-by: Peter Robinson <[email protected]>
Acked-by: Florian Fainelli <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/broadcom/genet/bcmgenet.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
index a2062144d7ca..7dcd5613ee56 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -76,7 +76,7 @@ static inline void bcmgenet_writel(u32 value, void __iomem *offset)
if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN))
__raw_writel(value, offset);
else
- writel_relaxed(value, offset);
+ writel(value, offset);
}
static inline u32 bcmgenet_readl(void __iomem *offset)
@@ -84,7 +84,7 @@ static inline u32 bcmgenet_readl(void __iomem *offset)
if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN))
return __raw_readl(offset);
else
- return readl_relaxed(offset);
+ return readl(offset);
}
static inline void dmadesc_set_length_status(struct bcmgenet_priv *priv,
--
2.34.1
From: Arun Easi <[email protected]>
commit 8ad4be3d15cf144b5834bdb00d5bbe4050938dc7 upstream.
A device logout in loop topology initiates a device connection teardown
which loses the FW device handle. In loop topo, the device handle is not
regrabbed leading to device login failures and eventually to loss of the
device. Fix this by taking the main login path that does it.
Link: https://lore.kernel.org/r/[email protected]
Cc: [email protected]
Reviewed-by: Himanshu Madhani <[email protected]>
Signed-off-by: Arun Easi <[email protected]>
Signed-off-by: Nilesh Javali <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/qla2xxx/qla_init.c | 15 +++++++++++++++
drivers/scsi/qla2xxx/qla_os.c | 5 +++++
2 files changed, 20 insertions(+)
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -953,6 +953,9 @@ static void qla24xx_handle_gnl_done_even
set_bit(RELOGIN_NEEDED, &vha->dpc_flags);
}
break;
+ case ISP_CFG_NL:
+ qla24xx_fcport_handle_login(vha, fcport);
+ break;
default:
break;
}
@@ -1480,6 +1483,11 @@ static void qla_chk_n2n_b4_login(struct
u8 login = 0;
int rc;
+ ql_dbg(ql_dbg_disc, vha, 0x307b,
+ "%s %8phC DS %d LS %d lid %d retries=%d\n",
+ __func__, fcport->port_name, fcport->disc_state,
+ fcport->fw_login_state, fcport->loop_id, fcport->login_retry);
+
if (qla_tgt_mode_enabled(vha))
return;
@@ -5377,6 +5385,13 @@ qla2x00_configure_local_loop(scsi_qla_ho
memcpy(fcport->node_name, new_fcport->node_name,
WWN_SIZE);
fcport->scan_state = QLA_FCPORT_FOUND;
+ if (fcport->login_retry == 0) {
+ fcport->login_retry = vha->hw->login_retry_count;
+ ql_dbg(ql_dbg_disc, vha, 0x2135,
+ "Port login retry %8phN, lid 0x%04x retry cnt=%d.\n",
+ fcport->port_name, fcport->loop_id,
+ fcport->login_retry);
+ }
found++;
break;
}
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -5391,6 +5391,11 @@ void qla2x00_relogin(struct scsi_qla_hos
ea.fcport = fcport;
qla24xx_handle_relogin_event(vha, &ea);
} else if (vha->hw->current_topology ==
+ ISP_CFG_NL &&
+ IS_QLA2XXX_MIDTYPE(vha->hw)) {
+ (void)qla24xx_fcport_handle_login(vha,
+ fcport);
+ } else if (vha->hw->current_topology ==
ISP_CFG_NL) {
fcport->login_retry--;
status =
From: Baokun Li <[email protected]>
commit 9cdd3128874f5fe759e2c4e1360ab7fb96a8d1df upstream.
If an error is returned in jffs2_scan_eraseblock() and some memory
has been added to the jffs2_summary *s, we can observe the following
kmemleak report:
--------------------------------------------
unreferenced object 0xffff88812b889c40 (size 64):
comm "mount", pid 692, jiffies 4294838325 (age 34.288s)
hex dump (first 32 bytes):
40 48 b5 14 81 88 ff ff 01 e0 31 00 00 00 50 00 @H........1...P.
00 00 01 00 00 00 01 00 00 00 02 00 00 00 09 08 ................
backtrace:
[<ffffffffae93a3a3>] __kmalloc+0x613/0x910
[<ffffffffaf423b9c>] jffs2_sum_add_dirent_mem+0x5c/0xa0
[<ffffffffb0f3afa8>] jffs2_scan_medium.cold+0x36e5/0x4794
[<ffffffffb0f3dbe1>] jffs2_do_mount_fs.cold+0xa7/0x2267
[<ffffffffaf40acf3>] jffs2_do_fill_super+0x383/0xc30
[<ffffffffaf40c00a>] jffs2_fill_super+0x2ea/0x4c0
[<ffffffffb0315d64>] mtd_get_sb+0x254/0x400
[<ffffffffb0315f5f>] mtd_get_sb_by_nr+0x4f/0xd0
[<ffffffffb0316478>] get_tree_mtd+0x498/0x840
[<ffffffffaf40bd15>] jffs2_get_tree+0x25/0x30
[<ffffffffae9f358d>] vfs_get_tree+0x8d/0x2e0
[<ffffffffaea7a98f>] path_mount+0x50f/0x1e50
[<ffffffffaea7c3d7>] do_mount+0x107/0x130
[<ffffffffaea7c5c5>] __se_sys_mount+0x1c5/0x2f0
[<ffffffffaea7c917>] __x64_sys_mount+0xc7/0x160
[<ffffffffb10142f5>] do_syscall_64+0x45/0x70
unreferenced object 0xffff888114b54840 (size 32):
comm "mount", pid 692, jiffies 4294838325 (age 34.288s)
hex dump (first 32 bytes):
c0 75 b5 14 81 88 ff ff 02 e0 02 00 00 00 02 00 .u..............
00 00 84 00 00 00 44 00 00 00 6b 6b 6b 6b 6b a5 ......D...kkkkk.
backtrace:
[<ffffffffae93be24>] kmem_cache_alloc_trace+0x584/0x880
[<ffffffffaf423b04>] jffs2_sum_add_inode_mem+0x54/0x90
[<ffffffffb0f3bd44>] jffs2_scan_medium.cold+0x4481/0x4794
[...]
unreferenced object 0xffff888114b57280 (size 32):
comm "mount", pid 692, jiffies 4294838393 (age 34.357s)
hex dump (first 32 bytes):
10 d5 6c 11 81 88 ff ff 08 e0 05 00 00 00 01 00 ..l.............
00 00 38 02 00 00 28 00 00 00 6b 6b 6b 6b 6b a5 ..8...(...kkkkk.
backtrace:
[<ffffffffae93be24>] kmem_cache_alloc_trace+0x584/0x880
[<ffffffffaf423c34>] jffs2_sum_add_xattr_mem+0x54/0x90
[<ffffffffb0f3a24f>] jffs2_scan_medium.cold+0x298c/0x4794
[...]
unreferenced object 0xffff8881116cd510 (size 16):
comm "mount", pid 692, jiffies 4294838395 (age 34.355s)
hex dump (first 16 bytes):
00 00 00 00 00 00 00 00 09 e0 60 02 00 00 6b a5 ..........`...k.
backtrace:
[<ffffffffae93be24>] kmem_cache_alloc_trace+0x584/0x880
[<ffffffffaf423cc4>] jffs2_sum_add_xref_mem+0x54/0x90
[<ffffffffb0f3b2e3>] jffs2_scan_medium.cold+0x3a20/0x4794
[...]
--------------------------------------------
Therefore, we should call jffs2_sum_reset_collected(s) on exit to
release the memory added in s. In addition, a new tag "out_buf" is
added to prevent the NULL pointer reference caused by s being NULL.
(thanks to Zhang Yi for this analysis)
Fixes: e631ddba5887 ("[JFFS2] Add erase block summary support (mount time improvement)")
Cc: [email protected]
Co-developed-with: Zhihao Cheng <[email protected]>
Signed-off-by: Baokun Li <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/jffs2/scan.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/fs/jffs2/scan.c
+++ b/fs/jffs2/scan.c
@@ -136,7 +136,7 @@ int jffs2_scan_medium(struct jffs2_sb_in
if (!s) {
JFFS2_WARNING("Can't allocate memory for summary\n");
ret = -ENOMEM;
- goto out;
+ goto out_buf;
}
}
@@ -275,13 +275,15 @@ int jffs2_scan_medium(struct jffs2_sb_in
}
ret = 0;
out:
+ jffs2_sum_reset_collected(s);
+ kfree(s);
+ out_buf:
if (buf_size)
kfree(flashbuf);
#ifndef __ECOS
else
mtd_unpoint(c->mtd, 0, c->mtd->size);
#endif
- kfree(s);
return ret;
}
From: Miaoqian Lin <[email protected]>
[ Upstream commit 7f0f1f3ef62ed7a40e30aff28115bd94c4211d1d ]
The corresponding API for clk_prepare_enable is clk_disable_unprepare,
other than clk_disable_unprepare.
Fix this by changing clk_disable to clk_disable_unprepare.
Fixes: beca35d05cc2 ("hwrng: nomadik - use clk_prepare_enable()")
Signed-off-by: Miaoqian Lin <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/char/hw_random/nomadik-rng.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/char/hw_random/nomadik-rng.c b/drivers/char/hw_random/nomadik-rng.c
index 67947a19aa22..e8f9621e7954 100644
--- a/drivers/char/hw_random/nomadik-rng.c
+++ b/drivers/char/hw_random/nomadik-rng.c
@@ -65,14 +65,14 @@ static int nmk_rng_probe(struct amba_device *dev, const struct amba_id *id)
out_release:
amba_release_regions(dev);
out_clk:
- clk_disable(rng_clk);
+ clk_disable_unprepare(rng_clk);
return ret;
}
static void nmk_rng_remove(struct amba_device *dev)
{
amba_release_regions(dev);
- clk_disable(rng_clk);
+ clk_disable_unprepare(rng_clk);
}
static const struct amba_id nmk_rng_ids[] = {
--
2.34.1
From: Miaoqian Lin <[email protected]>
[ Upstream commit 4528668ca331f7ce5999b7746657b46db5b3b785 ]
The of_find_compatible_node() function returns a node pointer with
refcount incremented, We should use of_node_put() on it when done
Add the missing of_node_put() to release the refcount.
Fixes: 2121aa3e2312 ("mips: cdmm: Add mti,mips-cdmm dtb node support")
Signed-off-by: Miaoqian Lin <[email protected]>
Acked-by: Serge Semin <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/bus/mips_cdmm.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/bus/mips_cdmm.c b/drivers/bus/mips_cdmm.c
index 626dedd110cb..fca0d0669aa9 100644
--- a/drivers/bus/mips_cdmm.c
+++ b/drivers/bus/mips_cdmm.c
@@ -351,6 +351,7 @@ phys_addr_t __weak mips_cdmm_phys_base(void)
np = of_find_compatible_node(NULL, NULL, "mti,mips-cdmm");
if (np) {
err = of_address_to_resource(np, 0, &res);
+ of_node_put(np);
if (!err)
return res.start;
}
--
2.34.1
From: Fengnan Chang <[email protected]>
[ Upstream commit 9b56adcf525522e9ffa52471260298d91fc1d395 ]
When compressed file has blocks, f2fs_ioc_start_atomic_write will succeed,
but compressed flag will be remained in inode. If write partial compreseed
cluster and commit atomic write will cause data corruption.
This is the reproduction process:
Step 1:
create a compressed file ,write 64K data , call fsync(), then the blocks
are write as compressed cluster.
Step2:
iotcl(F2FS_IOC_START_ATOMIC_WRITE) --- this should be fail, but not.
write page 0 and page 3.
iotcl(F2FS_IOC_COMMIT_ATOMIC_WRITE) -- page 0 and 3 write as normal file,
Step3:
drop cache.
read page 0-4 -- Since page 0 has a valid block address, read as
non-compressed cluster, page 1 and 2 will be filled with compressed data
or zero.
The root cause is, after commit 7eab7a696827 ("f2fs: compress: remove
unneeded read when rewrite whole cluster"), in step 2, f2fs_write_begin()
only set target page dirty, and in f2fs_commit_inmem_pages(), we will write
partial raw pages into compressed cluster, result in corrupting compressed
cluster layout.
Fixes: 4c8ff7095bef ("f2fs: support data compression")
Fixes: 7eab7a696827 ("f2fs: compress: remove unneeded read when rewrite whole cluster")
Reported-by: kernel test robot <[email protected]>
Reported-by: Dan Carpenter <[email protected]>
Signed-off-by: Fengnan Chang <[email protected]>
Reviewed-by: Chao Yu <[email protected]>
Signed-off-by: Jaegeuk Kim <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/f2fs/data.c | 2 +-
fs/f2fs/file.c | 5 ++++-
2 files changed, 5 insertions(+), 2 deletions(-)
diff --git a/fs/f2fs/data.c b/fs/f2fs/data.c
index 04e980c58319..b2016fd3a7ca 100644
--- a/fs/f2fs/data.c
+++ b/fs/f2fs/data.c
@@ -3461,7 +3461,7 @@ static int f2fs_write_begin(struct file *file, struct address_space *mapping,
*fsdata = NULL;
- if (len == PAGE_SIZE)
+ if (len == PAGE_SIZE && !(f2fs_is_atomic_file(inode)))
goto repeat;
ret = f2fs_prepare_compress_overwrite(inode, pagep,
diff --git a/fs/f2fs/file.c b/fs/f2fs/file.c
index 1fbaab1f7aba..792f9059d897 100644
--- a/fs/f2fs/file.c
+++ b/fs/f2fs/file.c
@@ -2035,7 +2035,10 @@ static int f2fs_ioc_start_atomic_write(struct file *filp)
inode_lock(inode);
- f2fs_disable_compressed_file(inode);
+ if (!f2fs_disable_compressed_file(inode)) {
+ ret = -EINVAL;
+ goto out;
+ }
if (f2fs_is_atomic_file(inode)) {
if (is_inode_flag_set(inode, FI_ATOMIC_REVOKE_REQUEST))
--
2.34.1
From: Hector Martin <[email protected]>
commit d19d8e3ba256f81ea4a27209dbbd1f0a00ef1903 upstream.
If boardrev is missing from the NVRAM we add a default one, but this
might need more space in the output buffer than was allocated. Ensure
we have enough padding for this in the buffer.
Fixes: 46f2b38a91b0 ("brcmfmac: insert default boardrev in nvram data if missing")
Reviewed-by: Arend van Spriel <[email protected]>
Cc: [email protected]
Signed-off-by: Hector Martin <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
@@ -207,6 +207,8 @@ static int brcmf_init_nvram_parser(struc
size = BRCMF_FW_MAX_NVRAM_SIZE;
else
size = data_len;
+ /* Add space for properties we may add */
+ size += strlen(BRCMF_FW_DEFAULT_BOARDREV) + 1;
/* Alloc for extra 0 byte + roundup by 4 + length field */
size += 1 + 3 + sizeof(u32);
nvp->nvram = kzalloc(size, GFP_KERNEL);
From: Xie Yongji <[email protected]>
commit 57a13a5b8157d9a8606490aaa1b805bafe6c37e1 upstream.
The block layer can't support a block size larger than
page size yet. And a block size that's too small or
not a power of two won't work either. If a misconfigured
device presents an invalid block size in configuration space,
it will result in the kernel crash something like below:
[ 506.154324] BUG: kernel NULL pointer dereference, address: 0000000000000008
[ 506.160416] RIP: 0010:create_empty_buffers+0x24/0x100
[ 506.174302] Call Trace:
[ 506.174651] create_page_buffers+0x4d/0x60
[ 506.175207] block_read_full_page+0x50/0x380
[ 506.175798] ? __mod_lruvec_page_state+0x60/0xa0
[ 506.176412] ? __add_to_page_cache_locked+0x1b2/0x390
[ 506.177085] ? blkdev_direct_IO+0x4a0/0x4a0
[ 506.177644] ? scan_shadow_nodes+0x30/0x30
[ 506.178206] ? lru_cache_add+0x42/0x60
[ 506.178716] do_read_cache_page+0x695/0x740
[ 506.179278] ? read_part_sector+0xe0/0xe0
[ 506.179821] read_part_sector+0x36/0xe0
[ 506.180337] adfspart_check_ICS+0x32/0x320
[ 506.180890] ? snprintf+0x45/0x70
[ 506.181350] ? read_part_sector+0xe0/0xe0
[ 506.181906] bdev_disk_changed+0x229/0x5c0
[ 506.182483] blkdev_get_whole+0x6d/0x90
[ 506.183013] blkdev_get_by_dev+0x122/0x2d0
[ 506.183562] device_add_disk+0x39e/0x3c0
[ 506.184472] virtblk_probe+0x3f8/0x79b [virtio_blk]
[ 506.185461] virtio_dev_probe+0x15e/0x1d0 [virtio]
So let's use a block layer helper to validate the block size.
Signed-off-by: Xie Yongji <[email protected]>
Acked-by: Michael S. Tsirkin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Lee Jones <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/block/virtio_blk.c | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
--- a/drivers/block/virtio_blk.c
+++ b/drivers/block/virtio_blk.c
@@ -825,9 +825,17 @@ static int virtblk_probe(struct virtio_d
err = virtio_cread_feature(vdev, VIRTIO_BLK_F_BLK_SIZE,
struct virtio_blk_config, blk_size,
&blk_size);
- if (!err)
+ if (!err) {
+ err = blk_validate_block_size(blk_size);
+ if (err) {
+ dev_err(&vdev->dev,
+ "virtio_blk: invalid block size: 0x%x\n",
+ blk_size);
+ goto out_free_tags;
+ }
+
blk_queue_logical_block_size(q, blk_size);
- else
+ } else
blk_size = queue_logical_block_size(q);
/* Use topology information if available */
From: Anders Roxell <[email protected]>
commit 8219d31effa7be5dbc7ff915d7970672e028c701 upstream.
Building tinyconfig with gcc (Debian 11.2.0-16) and assembler (Debian
2.37.90.20220207) the following build error shows up:
{standard input}: Assembler messages:
{standard input}:10576: Error: unrecognized opcode: `stbcx.'
{standard input}:10680: Error: unrecognized opcode: `lharx'
{standard input}:10694: Error: unrecognized opcode: `lbarx'
Rework to add assembler directives [1] around the instruction. The
problem with this might be that we can trick a power6 into
single-stepping through an stbcx. for instance, and it will execute that
in kernel mode.
[1] https://sourceware.org/binutils/docs/as/PowerPC_002dPseudo.html#PowerPC_002dPseudo
Fixes: 350779a29f11 ("powerpc: Handle most loads and stores in instruction emulation code")
Cc: [email protected] # v4.14+
Co-developed-by: Arnd Bergmann <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Anders Roxell <[email protected]>
Reviewed-by: Segher Boessenkool <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/lib/sstep.c | 6 ++++++
1 file changed, 6 insertions(+)
--- a/arch/powerpc/lib/sstep.c
+++ b/arch/powerpc/lib/sstep.c
@@ -949,7 +949,10 @@ NOKPROBE_SYMBOL(emulate_dcbz);
#define __put_user_asmx(x, addr, err, op, cr) \
__asm__ __volatile__( \
+ ".machine push\n" \
+ ".machine power8\n" \
"1: " op " %2,0,%3\n" \
+ ".machine pop\n" \
" mfcr %1\n" \
"2:\n" \
".section .fixup,\"ax\"\n" \
@@ -962,7 +965,10 @@ NOKPROBE_SYMBOL(emulate_dcbz);
#define __get_user_asmx(x, addr, err, op) \
__asm__ __volatile__( \
+ ".machine push\n" \
+ ".machine power8\n" \
"1: "op" %1,0,%2\n" \
+ ".machine pop\n" \
"2:\n" \
".section .fixup,\"ax\"\n" \
"3: li %0,%3\n" \
From: Cooper Chiou <[email protected]>
commit 5662abf6e21338be6d085d6375d3732ac6147fd2 upstream.
Tag code stored in bit7:5 for CTA block byte[3] is not the same as
CEA extension block definition. Only check CEA block has
basic audio support.
v3: update commit message.
Cc: [email protected]
Cc: Jani Nikula <[email protected]>
Cc: Shawn C Lee <[email protected]>
Cc: intel-gfx <[email protected]>
Signed-off-by: Cooper Chiou <[email protected]>
Signed-off-by: Lee Shawn C <[email protected]>
Fixes: e28ad544f462 ("drm/edid: parse CEA blocks embedded in DisplayID")
Reviewed-by: Jani Nikula <[email protected]>
Signed-off-by: Jani Nikula <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/drm_edid.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -4806,7 +4806,8 @@ bool drm_detect_monitor_audio(struct edi
if (!edid_ext)
goto end;
- has_audio = ((edid_ext[3] & EDID_BASIC_AUDIO) != 0);
+ has_audio = (edid_ext[0] == CEA_EXT &&
+ (edid_ext[3] & EDID_BASIC_AUDIO) != 0);
if (has_audio) {
DRM_DEBUG_KMS("Monitor has basic audio support\n");
From: George Kennedy <[email protected]>
[ Upstream commit 5c6f402bdcf9e7239c6bc7087eda71ac99b31379 ]
Do a sanity check on pixclock value to avoid divide by zero.
If the pixclock value is zero, the cirrusfb driver will round up
pixclock to get the derived frequency as close to maxclock as
possible.
Syzkaller reported a divide error in cirrusfb_check_pixclock.
divide error: 0000 [#1] SMP KASAN PTI
CPU: 0 PID: 14938 Comm: cirrusfb_test Not tainted 5.15.0-rc6 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2
RIP: 0010:cirrusfb_check_var+0x6f1/0x1260
Call Trace:
fb_set_var+0x398/0xf90
do_fb_ioctl+0x4b8/0x6f0
fb_ioctl+0xeb/0x130
__x64_sys_ioctl+0x19d/0x220
do_syscall_64+0x3a/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
Signed-off-by: George Kennedy <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/video/fbdev/cirrusfb.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/video/fbdev/cirrusfb.c b/drivers/video/fbdev/cirrusfb.c
index 15a9ee7cd734..b4980bc2985e 100644
--- a/drivers/video/fbdev/cirrusfb.c
+++ b/drivers/video/fbdev/cirrusfb.c
@@ -469,7 +469,7 @@ static int cirrusfb_check_mclk(struct fb_info *info, long freq)
return 0;
}
-static int cirrusfb_check_pixclock(const struct fb_var_screeninfo *var,
+static int cirrusfb_check_pixclock(struct fb_var_screeninfo *var,
struct fb_info *info)
{
long freq;
@@ -478,9 +478,7 @@ static int cirrusfb_check_pixclock(const struct fb_var_screeninfo *var,
unsigned maxclockidx = var->bits_per_pixel >> 3;
/* convert from ps to kHz */
- freq = PICOS2KHZ(var->pixclock);
-
- dev_dbg(info->device, "desired pixclock: %ld kHz\n", freq);
+ freq = PICOS2KHZ(var->pixclock ? : 1);
maxclock = cirrusfb_board_info[cinfo->btype].maxclock[maxclockidx];
cinfo->multiplexing = 0;
@@ -488,11 +486,13 @@ static int cirrusfb_check_pixclock(const struct fb_var_screeninfo *var,
/* If the frequency is greater than we can support, we might be able
* to use multiplexing for the video mode */
if (freq > maxclock) {
- dev_err(info->device,
- "Frequency greater than maxclock (%ld kHz)\n",
- maxclock);
- return -EINVAL;
+ var->pixclock = KHZ2PICOS(maxclock);
+
+ while ((freq = PICOS2KHZ(var->pixclock)) > maxclock)
+ var->pixclock++;
}
+ dev_dbg(info->device, "desired pixclock: %ld kHz\n", freq);
+
/*
* Additional constraint: 8bpp uses DAC clock doubling to allow maximum
* pixel clock
--
2.34.1
From: Hengqi Chen <[email protected]>
commit 58617014405ad5c9f94f464444f4972dabb71ca7 upstream.
Fix the descriptions of the return values of helper bpf_current_task_under_cgroup().
Fixes: c6b5fb8690fa ("bpf: add documentation for eBPF helpers (42-50)")
Signed-off-by: Hengqi Chen <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/uapi/linux/bpf.h | 4 ++--
tools/include/uapi/linux/bpf.h | 4 ++--
2 files changed, 4 insertions(+), 4 deletions(-)
--- a/include/uapi/linux/bpf.h
+++ b/include/uapi/linux/bpf.h
@@ -1490,8 +1490,8 @@ union bpf_attr {
* Return
* The return value depends on the result of the test, and can be:
*
- * * 0, if current task belongs to the cgroup2.
- * * 1, if current task does not belong to the cgroup2.
+ * * 1, if current task belongs to the cgroup2.
+ * * 0, if current task does not belong to the cgroup2.
* * A negative error code, if an error occurred.
*
* long bpf_skb_change_tail(struct sk_buff *skb, u32 len, u64 flags)
--- a/tools/include/uapi/linux/bpf.h
+++ b/tools/include/uapi/linux/bpf.h
@@ -1490,8 +1490,8 @@ union bpf_attr {
* Return
* The return value depends on the result of the test, and can be:
*
- * * 0, if current task belongs to the cgroup2.
- * * 1, if current task does not belong to the cgroup2.
+ * * 1, if current task belongs to the cgroup2.
+ * * 0, if current task does not belong to the cgroup2.
* * A negative error code, if an error occurred.
*
* long bpf_skb_change_tail(struct sk_buff *skb, u32 len, u64 flags)
From: Abel Vesa <[email protected]>
[ Upstream commit eccac77ede3946c90143447cdc785dc16aec4b24 ]
The audio_mclk_root_clk was added as a gate with the CCGR121 (0x4790),
but according to the reference manual, there is no such gate. The
CCGR121 belongs to ECSPI2 and it is not shared.
Fixes: 8f6d8094b215b57 ("ARM: imx: add imx7d clk tree support")
Reported-by: David Wolfe <[email protected]>
Signed-off-by: Abel Vesa <[email protected]>
Reviewed-by: Peng Fan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/imx/clk-imx7d.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/clk/imx/clk-imx7d.c b/drivers/clk/imx/clk-imx7d.c
index c4e0f1c07192..3f6fd7ef2a68 100644
--- a/drivers/clk/imx/clk-imx7d.c
+++ b/drivers/clk/imx/clk-imx7d.c
@@ -849,7 +849,6 @@ static void __init imx7d_clocks_init(struct device_node *ccm_node)
hws[IMX7D_WDOG4_ROOT_CLK] = imx_clk_hw_gate4("wdog4_root_clk", "wdog_post_div", base + 0x49f0, 0);
hws[IMX7D_KPP_ROOT_CLK] = imx_clk_hw_gate4("kpp_root_clk", "ipg_root_clk", base + 0x4aa0, 0);
hws[IMX7D_CSI_MCLK_ROOT_CLK] = imx_clk_hw_gate4("csi_mclk_root_clk", "csi_mclk_post_div", base + 0x4490, 0);
- hws[IMX7D_AUDIO_MCLK_ROOT_CLK] = imx_clk_hw_gate4("audio_mclk_root_clk", "audio_mclk_post_div", base + 0x4790, 0);
hws[IMX7D_WRCLK_ROOT_CLK] = imx_clk_hw_gate4("wrclk_root_clk", "wrclk_post_div", base + 0x47a0, 0);
hws[IMX7D_USB_CTRL_CLK] = imx_clk_hw_gate4("usb_ctrl_clk", "ahb_root_clk", base + 0x4680, 0);
hws[IMX7D_USB_PHY1_CLK] = imx_clk_hw_gate4("usb_phy1_clk", "pll_usb1_main_clk", base + 0x46a0, 0);
--
2.34.1
From: Eric W. Biederman <[email protected]>
commit 390031c942116d4733310f0684beb8db19885fe6 upstream.
Matthew Wilcox reported that there is a missing mmap_lock in
file_files_note that could possibly lead to a user after free.
Solve this by using the existing vma snapshot for consistency
and to avoid the need to take the mmap_lock anywhere in the
coredump code except for dump_vma_snapshot.
Update the dump_vma_snapshot to capture vm_pgoff and vm_file
that are neeeded by fill_files_note.
Add free_vma_snapshot to free the captured values of vm_file.
Reported-by: Matthew Wilcox <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Cc: [email protected]
Fixes: a07279c9a8cd ("binfmt_elf, binfmt_elf_fdpic: use a VMA list snapshot")
Fixes: 2aa362c49c31 ("coredump: extend core dump note section to contain file names of mapped files")
Reviewed-by: Kees Cook <[email protected]>
Signed-off-by: "Eric W. Biederman" <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/binfmt_elf.c | 24 ++++++++++++------------
fs/coredump.c | 22 +++++++++++++++++++++-
include/linux/coredump.h | 2 ++
3 files changed, 35 insertions(+), 13 deletions(-)
--- a/fs/binfmt_elf.c
+++ b/fs/binfmt_elf.c
@@ -1613,17 +1613,16 @@ static void fill_siginfo_note(struct mem
* long file_ofs
* followed by COUNT filenames in ASCII: "FILE1" NUL "FILE2" NUL...
*/
-static int fill_files_note(struct memelfnote *note)
+static int fill_files_note(struct memelfnote *note, struct coredump_params *cprm)
{
- struct mm_struct *mm = current->mm;
- struct vm_area_struct *vma;
unsigned count, size, names_ofs, remaining, n;
user_long_t *data;
user_long_t *start_end_ofs;
char *name_base, *name_curpos;
+ int i;
/* *Estimated* file count and total data size needed */
- count = mm->map_count;
+ count = cprm->vma_count;
if (count > UINT_MAX / 64)
return -EINVAL;
size = count * 64;
@@ -1645,11 +1644,12 @@ static int fill_files_note(struct memelf
name_base = name_curpos = ((char *)data) + names_ofs;
remaining = size - names_ofs;
count = 0;
- for (vma = mm->mmap; vma != NULL; vma = vma->vm_next) {
+ for (i = 0; i < cprm->vma_count; i++) {
+ struct core_vma_metadata *m = &cprm->vma_meta[i];
struct file *file;
const char *filename;
- file = vma->vm_file;
+ file = m->file;
if (!file)
continue;
filename = file_path(file, name_curpos, remaining);
@@ -1669,9 +1669,9 @@ static int fill_files_note(struct memelf
memmove(name_curpos, filename, n);
name_curpos += n;
- *start_end_ofs++ = vma->vm_start;
- *start_end_ofs++ = vma->vm_end;
- *start_end_ofs++ = vma->vm_pgoff;
+ *start_end_ofs++ = m->start;
+ *start_end_ofs++ = m->end;
+ *start_end_ofs++ = m->pgoff;
count++;
}
@@ -1682,7 +1682,7 @@ static int fill_files_note(struct memelf
* Count usually is less than mm->map_count,
* we need to move filenames down.
*/
- n = mm->map_count - count;
+ n = cprm->vma_count - count;
if (n != 0) {
unsigned shift_bytes = n * 3 * sizeof(data[0]);
memmove(name_base - shift_bytes, name_base,
@@ -1884,7 +1884,7 @@ static int fill_note_info(struct elfhdr
fill_auxv_note(&info->auxv, current->mm);
info->size += notesize(&info->auxv);
- if (fill_files_note(&info->files) == 0)
+ if (fill_files_note(&info->files, cprm) == 0)
info->size += notesize(&info->files);
return 1;
@@ -2073,7 +2073,7 @@ static int fill_note_info(struct elfhdr
fill_auxv_note(info->notes + 3, current->mm);
info->numnote = 4;
- if (fill_files_note(info->notes + info->numnote) == 0) {
+ if (fill_files_note(info->notes + info->numnote, cprm) == 0) {
info->notes_files = info->notes + info->numnote;
info->numnote++;
}
--- a/fs/coredump.c
+++ b/fs/coredump.c
@@ -54,6 +54,7 @@
#include <trace/events/sched.h>
static bool dump_vma_snapshot(struct coredump_params *cprm);
+static void free_vma_snapshot(struct coredump_params *cprm);
int core_uses_pid;
unsigned int core_pipe_limit;
@@ -816,7 +817,7 @@ void do_coredump(const kernel_siginfo_t
file_start_write(cprm.file);
core_dumped = binfmt->core_dump(&cprm);
file_end_write(cprm.file);
- kvfree(cprm.vma_meta);
+ free_vma_snapshot(&cprm);
}
if (ispipe && core_pipe_limit)
wait_for_dump_helpers(cprm.file);
@@ -1088,6 +1089,20 @@ static struct vm_area_struct *next_vma(s
return gate_vma;
}
+static void free_vma_snapshot(struct coredump_params *cprm)
+{
+ if (cprm->vma_meta) {
+ int i;
+ for (i = 0; i < cprm->vma_count; i++) {
+ struct file *file = cprm->vma_meta[i].file;
+ if (file)
+ fput(file);
+ }
+ kvfree(cprm->vma_meta);
+ cprm->vma_meta = NULL;
+ }
+}
+
/*
* Under the mmap_lock, take a snapshot of relevant information about the task's
* VMAs.
@@ -1124,6 +1139,11 @@ static bool dump_vma_snapshot(struct cor
m->end = vma->vm_end;
m->flags = vma->vm_flags;
m->dump_size = vma_dump_size(vma, cprm->mm_flags);
+ m->pgoff = vma->vm_pgoff;
+
+ m->file = vma->vm_file;
+ if (m->file)
+ get_file(m->file);
}
mmap_write_unlock(mm);
--- a/include/linux/coredump.h
+++ b/include/linux/coredump.h
@@ -11,6 +11,8 @@ struct core_vma_metadata {
unsigned long start, end;
unsigned long flags;
unsigned long dump_size;
+ unsigned long pgoff;
+ struct file *file;
};
/*
From: Pavel Skripkin <[email protected]>
[ Upstream commit d1e0df1c57bd30871dd1c855742a7c346dbca853 ]
Syzbot reported 2 KMSAN bugs in ath9k. All of them are caused by missing
field initialization.
In htc_connect_service() svc_meta_len and pad are not initialized. Based
on code it looks like in current skb there is no service data, so simply
initialize svc_meta_len to 0.
htc_issue_send() does not initialize htc_frame_hdr::control array. Based
on firmware code, it will initialize it by itself, so simply zero whole
array to make KMSAN happy
Fail logs:
BUG: KMSAN: kernel-usb-infoleak in usb_submit_urb+0x6c1/0x2aa0 drivers/usb/core/urb.c:430
usb_submit_urb+0x6c1/0x2aa0 drivers/usb/core/urb.c:430
hif_usb_send_regout drivers/net/wireless/ath/ath9k/hif_usb.c:127 [inline]
hif_usb_send+0x5f0/0x16f0 drivers/net/wireless/ath/ath9k/hif_usb.c:479
htc_issue_send drivers/net/wireless/ath/ath9k/htc_hst.c:34 [inline]
htc_connect_service+0x143e/0x1960 drivers/net/wireless/ath/ath9k/htc_hst.c:275
...
Uninit was created at:
slab_post_alloc_hook mm/slab.h:524 [inline]
slab_alloc_node mm/slub.c:3251 [inline]
__kmalloc_node_track_caller+0xe0c/0x1510 mm/slub.c:4974
kmalloc_reserve net/core/skbuff.c:354 [inline]
__alloc_skb+0x545/0xf90 net/core/skbuff.c:426
alloc_skb include/linux/skbuff.h:1126 [inline]
htc_connect_service+0x1029/0x1960 drivers/net/wireless/ath/ath9k/htc_hst.c:258
...
Bytes 4-7 of 18 are uninitialized
Memory access of size 18 starts at ffff888027377e00
BUG: KMSAN: kernel-usb-infoleak in usb_submit_urb+0x6c1/0x2aa0 drivers/usb/core/urb.c:430
usb_submit_urb+0x6c1/0x2aa0 drivers/usb/core/urb.c:430
hif_usb_send_regout drivers/net/wireless/ath/ath9k/hif_usb.c:127 [inline]
hif_usb_send+0x5f0/0x16f0 drivers/net/wireless/ath/ath9k/hif_usb.c:479
htc_issue_send drivers/net/wireless/ath/ath9k/htc_hst.c:34 [inline]
htc_connect_service+0x143e/0x1960 drivers/net/wireless/ath/ath9k/htc_hst.c:275
...
Uninit was created at:
slab_post_alloc_hook mm/slab.h:524 [inline]
slab_alloc_node mm/slub.c:3251 [inline]
__kmalloc_node_track_caller+0xe0c/0x1510 mm/slub.c:4974
kmalloc_reserve net/core/skbuff.c:354 [inline]
__alloc_skb+0x545/0xf90 net/core/skbuff.c:426
alloc_skb include/linux/skbuff.h:1126 [inline]
htc_connect_service+0x1029/0x1960 drivers/net/wireless/ath/ath9k/htc_hst.c:258
...
Bytes 16-17 of 18 are uninitialized
Memory access of size 18 starts at ffff888027377e00
Fixes: fb9987d0f748 ("ath9k_htc: Support for AR9271 chipset.")
Reported-by: [email protected]
Signed-off-by: Pavel Skripkin <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/ath9k/htc_hst.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/net/wireless/ath/ath9k/htc_hst.c b/drivers/net/wireless/ath/ath9k/htc_hst.c
index 510e61e97dbc..994ec48b2f66 100644
--- a/drivers/net/wireless/ath/ath9k/htc_hst.c
+++ b/drivers/net/wireless/ath/ath9k/htc_hst.c
@@ -30,6 +30,7 @@ static int htc_issue_send(struct htc_target *target, struct sk_buff* skb,
hdr->endpoint_id = epid;
hdr->flags = flags;
hdr->payload_len = cpu_to_be16(len);
+ memset(hdr->control, 0, sizeof(hdr->control));
status = target->hif->send(target->hif_dev, endpoint->ul_pipeid, skb);
@@ -272,6 +273,10 @@ int htc_connect_service(struct htc_target *target,
conn_msg->dl_pipeid = endpoint->dl_pipeid;
conn_msg->ul_pipeid = endpoint->ul_pipeid;
+ /* To prevent infoleak */
+ conn_msg->svc_meta_len = 0;
+ conn_msg->pad = 0;
+
ret = htc_issue_send(target, skb, skb->len, 0, ENDPOINT0);
if (ret)
goto err;
--
2.34.1
From: Wang Hai <[email protected]>
commit bbbf962d9460194993ee1943a793a0a0af4a7fbf upstream.
I got a memory leak report:
unreferenced object 0xffff8881191fc040 (size 232):
comm "kworker/u17:0", pid 23193, jiffies 4295238848 (age 3464.870s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff814c3ef4>] slab_post_alloc_hook+0x84/0x3b0
[<ffffffff814c8977>] kmem_cache_alloc_node+0x167/0x340
[<ffffffff832974fb>] __alloc_skb+0x1db/0x200
[<ffffffff82612b5d>] wg_socket_send_buffer_to_peer+0x3d/0xc0
[<ffffffff8260e94a>] wg_packet_send_handshake_initiation+0xfa/0x110
[<ffffffff8260ec81>] wg_packet_handshake_send_worker+0x21/0x30
[<ffffffff8119c558>] process_one_work+0x2e8/0x770
[<ffffffff8119ca2a>] worker_thread+0x4a/0x4b0
[<ffffffff811a88e0>] kthread+0x120/0x160
[<ffffffff8100242f>] ret_from_fork+0x1f/0x30
In function wg_socket_send_buffer_as_reply_to_skb() or wg_socket_send_
buffer_to_peer(), the semantics of send6() is required to free skb. But
when CONFIG_IPV6 is disable, kfree_skb() is missing. This patch adds it
to fix this bug.
Signed-off-by: Wang Hai <[email protected]>
Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
Signed-off-by: Jason A. Donenfeld <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireguard/socket.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/net/wireguard/socket.c
+++ b/drivers/net/wireguard/socket.c
@@ -160,6 +160,7 @@ out:
rcu_read_unlock_bh();
return ret;
#else
+ kfree_skb(skb);
return -EAFNOSUPPORT;
#endif
}
From: NeilBrown <[email protected]>
commit 3848e96edf4788f772d83990022fa7023a233d83 upstream.
xprt_destory() claims XPRT_LOCKED and then calls del_timer_sync().
Both xprt_unlock_connect() and xprt_release() call
->release_xprt()
which drops XPRT_LOCKED and *then* xprt_schedule_autodisconnect()
which calls mod_timer().
This may result in mod_timer() being called *after* del_timer_sync().
When this happens, the timer may fire long after the xprt has been freed,
and run_timer_softirq() will probably crash.
The pairing of ->release_xprt() and xprt_schedule_autodisconnect() is
always called under ->transport_lock. So if we take ->transport_lock to
call del_timer_sync(), we can be sure that mod_timer() will run first
(if it runs at all).
Cc: [email protected]
Signed-off-by: NeilBrown <[email protected]>
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/sunrpc/xprt.c | 7 +++++++
1 file changed, 7 insertions(+)
--- a/net/sunrpc/xprt.c
+++ b/net/sunrpc/xprt.c
@@ -2037,7 +2037,14 @@ static void xprt_destroy(struct rpc_xprt
*/
wait_on_bit_lock(&xprt->state, XPRT_LOCKED, TASK_UNINTERRUPTIBLE);
+ /*
+ * xprt_schedule_autodisconnect() can run after XPRT_LOCKED
+ * is cleared. We use ->transport_lock to ensure the mod_timer()
+ * can only run *before* del_time_sync(), never after.
+ */
+ spin_lock(&xprt->transport_lock);
del_timer_sync(&xprt->timer);
+ spin_unlock(&xprt->transport_lock);
/*
* Destroy sockets etc from the system workqueue so they can
From: Maxim Kiselev <[email protected]>
[ Upstream commit 5ebb74749202a25da4b3cc2eb15470225a05527c ]
On board rev A, the network interface labels for the switch ports
written on the front panel are different than on rev B and later.
This patch fixes network interface names for the switch ports according
to labels that are written on the front panel of the board rev B.
They start from ETH3 and end at ETH10.
This patch also introduces a separate device tree for rev A.
The main device tree is supposed to cover rev B and later.
Fixes: e69eb0824d8c ("powerpc: dts: t1040rdb: add ports for Seville Ethernet switch")
Signed-off-by: Maxim Kiselev <[email protected]>
Reviewed-by: Maxim Kochetkov <[email protected]>
Reviewed-by: Vladimir Oltean <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/boot/dts/fsl/t1040rdb-rev-a.dts | 30 ++++++++++++++++++++
arch/powerpc/boot/dts/fsl/t1040rdb.dts | 8 +++---
2 files changed, 34 insertions(+), 4 deletions(-)
create mode 100644 arch/powerpc/boot/dts/fsl/t1040rdb-rev-a.dts
diff --git a/arch/powerpc/boot/dts/fsl/t1040rdb-rev-a.dts b/arch/powerpc/boot/dts/fsl/t1040rdb-rev-a.dts
new file mode 100644
index 000000000000..73f8c998c64d
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/t1040rdb-rev-a.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * T1040RDB-REV-A Device Tree Source
+ *
+ * Copyright 2014 - 2015 Freescale Semiconductor Inc.
+ *
+ */
+
+#include "t1040rdb.dts"
+
+/ {
+ model = "fsl,T1040RDB-REV-A";
+ compatible = "fsl,T1040RDB-REV-A";
+};
+
+&seville_port0 {
+ label = "ETH5";
+};
+
+&seville_port2 {
+ label = "ETH7";
+};
+
+&seville_port4 {
+ label = "ETH9";
+};
+
+&seville_port6 {
+ label = "ETH11";
+};
diff --git a/arch/powerpc/boot/dts/fsl/t1040rdb.dts b/arch/powerpc/boot/dts/fsl/t1040rdb.dts
index af0c8a6f5613..b6733e7e6580 100644
--- a/arch/powerpc/boot/dts/fsl/t1040rdb.dts
+++ b/arch/powerpc/boot/dts/fsl/t1040rdb.dts
@@ -119,7 +119,7 @@
managed = "in-band-status";
phy-handle = <&phy_qsgmii_0>;
phy-mode = "qsgmii";
- label = "ETH5";
+ label = "ETH3";
status = "okay";
};
@@ -135,7 +135,7 @@
managed = "in-band-status";
phy-handle = <&phy_qsgmii_2>;
phy-mode = "qsgmii";
- label = "ETH7";
+ label = "ETH5";
status = "okay";
};
@@ -151,7 +151,7 @@
managed = "in-band-status";
phy-handle = <&phy_qsgmii_4>;
phy-mode = "qsgmii";
- label = "ETH9";
+ label = "ETH7";
status = "okay";
};
@@ -167,7 +167,7 @@
managed = "in-band-status";
phy-handle = <&phy_qsgmii_6>;
phy-mode = "qsgmii";
- label = "ETH11";
+ label = "ETH9";
status = "okay";
};
--
2.34.1
From: Yi Wang <[email protected]>
commit a80ced6ea514000d34bf1239d47553de0d1ee89e upstream.
As guest_irq is coming from KVM_IRQFD API call, it may trigger
crash in svm_update_pi_irte() due to out-of-bounds:
crash> bt
PID: 22218 TASK: ffff951a6ad74980 CPU: 73 COMMAND: "vcpu8"
#0 [ffffb1ba6707fa40] machine_kexec at ffffffff8565b397
#1 [ffffb1ba6707fa90] __crash_kexec at ffffffff85788a6d
#2 [ffffb1ba6707fb58] crash_kexec at ffffffff8578995d
#3 [ffffb1ba6707fb70] oops_end at ffffffff85623c0d
#4 [ffffb1ba6707fb90] no_context at ffffffff856692c9
#5 [ffffb1ba6707fbf8] exc_page_fault at ffffffff85f95b51
#6 [ffffb1ba6707fc50] asm_exc_page_fault at ffffffff86000ace
[exception RIP: svm_update_pi_irte+227]
RIP: ffffffffc0761b53 RSP: ffffb1ba6707fd08 RFLAGS: 00010086
RAX: ffffb1ba6707fd78 RBX: ffffb1ba66d91000 RCX: 0000000000000001
RDX: 00003c803f63f1c0 RSI: 000000000000019a RDI: ffffb1ba66db2ab8
RBP: 000000000000019a R8: 0000000000000040 R9: ffff94ca41b82200
R10: ffffffffffffffcf R11: 0000000000000001 R12: 0000000000000001
R13: 0000000000000001 R14: ffffffffffffffcf R15: 000000000000005f
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
#7 [ffffb1ba6707fdb8] kvm_irq_routing_update at ffffffffc09f19a1 [kvm]
#8 [ffffb1ba6707fde0] kvm_set_irq_routing at ffffffffc09f2133 [kvm]
#9 [ffffb1ba6707fe18] kvm_vm_ioctl at ffffffffc09ef544 [kvm]
RIP: 00007f143c36488b RSP: 00007f143a4e04b8 RFLAGS: 00000246
RAX: ffffffffffffffda RBX: 00007f05780041d0 RCX: 00007f143c36488b
RDX: 00007f05780041d0 RSI: 000000004008ae6a RDI: 0000000000000020
RBP: 00000000000004e8 R8: 0000000000000008 R9: 00007f05780041e0
R10: 00007f0578004560 R11: 0000000000000246 R12: 00000000000004e0
R13: 000000000000001a R14: 00007f1424001c60 R15: 00007f0578003bc0
ORIG_RAX: 0000000000000010 CS: 0033 SS: 002b
Vmx have been fix this in commit 3a8b0677fc61 (KVM: VMX: Do not BUG() on
out-of-bounds guest IRQ), so we can just copy source from that to fix
this.
Co-developed-by: Yi Liu <[email protected]>
Signed-off-by: Yi Liu <[email protected]>
Signed-off-by: Yi Wang <[email protected]>
Message-Id: <[email protected]>
Cc: [email protected]
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kvm/svm/avic.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
--- a/arch/x86/kvm/svm/avic.c
+++ b/arch/x86/kvm/svm/avic.c
@@ -806,7 +806,7 @@ int svm_update_pi_irte(struct kvm *kvm,
{
struct kvm_kernel_irq_routing_entry *e;
struct kvm_irq_routing_table *irq_rt;
- int idx, ret = -EINVAL;
+ int idx, ret = 0;
if (!kvm_arch_has_assigned_device(kvm) ||
!irq_remapping_cap(IRQ_POSTING_CAP))
@@ -817,7 +817,13 @@ int svm_update_pi_irte(struct kvm *kvm,
idx = srcu_read_lock(&kvm->irq_srcu);
irq_rt = srcu_dereference(kvm->irq_routing, &kvm->irq_srcu);
- WARN_ON(guest_irq >= irq_rt->nr_rt_entries);
+
+ if (guest_irq >= irq_rt->nr_rt_entries ||
+ hlist_empty(&irq_rt->map[guest_irq])) {
+ pr_warn_once("no route for guest_irq %u/%u (broken user space?)\n",
+ guest_irq, irq_rt->nr_rt_entries);
+ goto out;
+ }
hlist_for_each_entry(e, &irq_rt->map[guest_irq], link) {
struct vcpu_data vcpu_info;
From: Peter Rosin <[email protected]>
[ Upstream commit 1a22aabf20adf89cb216f566913196128766f25b ]
Attempting to rollback the activation of the current master when
the current master has not been activated is bad. priv->cur_chan
and priv->cur_adap are both still zeroed out and the rollback
may result in attempts to revert an of changeset that has not been
applied and do result in calls to both del and put the zeroed out
i2c_adapter. Maybe it crashes, or whatever, but it's bad in any
case.
Fixes: e9d1a0a41d44 ("i2c: mux: demux-pinctrl: Fix an error handling path in 'i2c_demux_pinctrl_probe()'")
Signed-off-by: Peter Rosin <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/i2c/muxes/i2c-demux-pinctrl.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/i2c/muxes/i2c-demux-pinctrl.c b/drivers/i2c/muxes/i2c-demux-pinctrl.c
index 5365199a31f4..f7a7405d4350 100644
--- a/drivers/i2c/muxes/i2c-demux-pinctrl.c
+++ b/drivers/i2c/muxes/i2c-demux-pinctrl.c
@@ -261,7 +261,7 @@ static int i2c_demux_pinctrl_probe(struct platform_device *pdev)
err = device_create_file(&pdev->dev, &dev_attr_available_masters);
if (err)
- goto err_rollback;
+ goto err_rollback_activation;
err = device_create_file(&pdev->dev, &dev_attr_current_master);
if (err)
@@ -271,8 +271,9 @@ static int i2c_demux_pinctrl_probe(struct platform_device *pdev)
err_rollback_available:
device_remove_file(&pdev->dev, &dev_attr_available_masters);
-err_rollback:
+err_rollback_activation:
i2c_demux_deactivate_master(priv);
+err_rollback:
for (j = 0; j < i; j++) {
of_node_put(priv->chan[j].parent_np);
of_changeset_destroy(&priv->chan[j].chgset);
--
2.34.1
From: Nikita Shubin <[email protected]>
commit 2b2b574ac587ec5bd7716a356492a85ab8b0ce9f upstream.
perf_callchain_store return 0 on success, -1 otherwise,
fix fill_callchain to return correct bool value.
Fixes: dbeb90b0c1eb ("riscv: Add perf callchain support")
Signed-off-by: Nikita Shubin <[email protected]>
Cc: [email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/riscv/kernel/perf_callchain.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/riscv/kernel/perf_callchain.c
+++ b/arch/riscv/kernel/perf_callchain.c
@@ -77,7 +77,7 @@ void perf_callchain_user(struct perf_cal
bool fill_callchain(unsigned long pc, void *entry)
{
- return perf_callchain_store(entry, pc);
+ return perf_callchain_store(entry, pc) == 0;
}
void notrace walk_stackframe(struct task_struct *task,
From: Christian Göttsche <[email protected]>
[ Upstream commit b97df7c098c531010e445da88d02b7bf7bf59ef6 ]
security_sid_to_context() expects a pointer to an u32 as the address
where to store the length of the computed context.
Reported by sparse:
security/selinux/xfrm.c:359:39: warning: incorrect type in arg 4
(different signedness)
security/selinux/xfrm.c:359:39: expected unsigned int
[usertype] *scontext_len
security/selinux/xfrm.c:359:39: got int *
Signed-off-by: Christian Göttsche <[email protected]>
[PM: wrapped commit description]
Signed-off-by: Paul Moore <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
security/selinux/xfrm.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/security/selinux/xfrm.c b/security/selinux/xfrm.c
index 7314196185d1..00e95f8bd7c7 100644
--- a/security/selinux/xfrm.c
+++ b/security/selinux/xfrm.c
@@ -346,7 +346,7 @@ int selinux_xfrm_state_alloc_acquire(struct xfrm_state *x,
int rc;
struct xfrm_sec_ctx *ctx;
char *ctx_str = NULL;
- int str_len;
+ u32 str_len;
if (!polsec)
return 0;
--
2.34.1
From: Miaoqian Lin <[email protected]>
[ Upstream commit 9ebd62d60edcd4d9c75485e5ccd0b79581ad3c49 ]
In the error handling path, the clk_prepare_enable() function
call should be balanced by a corresponding 'clk_disable_unprepare()'
call , as already done in the remove function.
Fixes: de66b3455023 ("ASoC: codecs: msm8916-wcd-analog: add MBHC support")
Signed-off-by: Miaoqian Lin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/codecs/msm8916-wcd-analog.c | 22 ++++++++++++++++------
1 file changed, 16 insertions(+), 6 deletions(-)
diff --git a/sound/soc/codecs/msm8916-wcd-analog.c b/sound/soc/codecs/msm8916-wcd-analog.c
index 3ddd822240e3..971b8360b5b1 100644
--- a/sound/soc/codecs/msm8916-wcd-analog.c
+++ b/sound/soc/codecs/msm8916-wcd-analog.c
@@ -1221,8 +1221,10 @@ static int pm8916_wcd_analog_spmi_probe(struct platform_device *pdev)
}
irq = platform_get_irq_byname(pdev, "mbhc_switch_int");
- if (irq < 0)
- return irq;
+ if (irq < 0) {
+ ret = irq;
+ goto err_disable_clk;
+ }
ret = devm_request_threaded_irq(dev, irq, NULL,
pm8916_mbhc_switch_irq_handler,
@@ -1234,8 +1236,10 @@ static int pm8916_wcd_analog_spmi_probe(struct platform_device *pdev)
if (priv->mbhc_btn_enabled) {
irq = platform_get_irq_byname(pdev, "mbhc_but_press_det");
- if (irq < 0)
- return irq;
+ if (irq < 0) {
+ ret = irq;
+ goto err_disable_clk;
+ }
ret = devm_request_threaded_irq(dev, irq, NULL,
mbhc_btn_press_irq_handler,
@@ -1246,8 +1250,10 @@ static int pm8916_wcd_analog_spmi_probe(struct platform_device *pdev)
dev_err(dev, "cannot request mbhc button press irq\n");
irq = platform_get_irq_byname(pdev, "mbhc_but_rel_det");
- if (irq < 0)
- return irq;
+ if (irq < 0) {
+ ret = irq;
+ goto err_disable_clk;
+ }
ret = devm_request_threaded_irq(dev, irq, NULL,
mbhc_btn_release_irq_handler,
@@ -1264,6 +1270,10 @@ static int pm8916_wcd_analog_spmi_probe(struct platform_device *pdev)
return devm_snd_soc_register_component(dev, &pm8916_wcd_analog,
pm8916_wcd_analog_dai,
ARRAY_SIZE(pm8916_wcd_analog_dai));
+
+err_disable_clk:
+ clk_disable_unprepare(priv->mclk);
+ return ret;
}
static int pm8916_wcd_analog_spmi_remove(struct platform_device *pdev)
--
2.34.1
From: Dongliang Mu <[email protected]>
[ Upstream commit 07922937e9a580825f9965c46fd15e23ba5754b6 ]
hdpvr_register_videodev is responsible to initialize a worker in
hdpvr_device. However, the worker is only initialized at
hdpvr_start_streaming other than hdpvr_register_videodev.
When hdpvr_probe does not initialize its worker, the hdpvr_disconnect
will encounter one WARN in flush_work.The stack trace is as follows:
hdpvr_disconnect+0xb8/0xf2 drivers/media/usb/hdpvr/hdpvr-core.c:425
usb_unbind_interface+0xbf/0x3a0 drivers/usb/core/driver.c:458
__device_release_driver drivers/base/dd.c:1206 [inline]
device_release_driver_internal+0x22a/0x230 drivers/base/dd.c:1237
bus_remove_device+0x108/0x160 drivers/base/bus.c:529
device_del+0x1fe/0x510 drivers/base/core.c:3592
usb_disable_device+0xd1/0x1d0 drivers/usb/core/message.c:1419
usb_disconnect+0x109/0x330 drivers/usb/core/hub.c:2228
Fix this by moving the initialization of dev->worker to the starting of
hdpvr_register_videodev
Reported-by: syzkaller <[email protected]>
Signed-off-by: Dongliang Mu <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/usb/hdpvr/hdpvr-video.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/media/usb/hdpvr/hdpvr-video.c b/drivers/media/usb/hdpvr/hdpvr-video.c
index 563128d11731..60e57e0f1927 100644
--- a/drivers/media/usb/hdpvr/hdpvr-video.c
+++ b/drivers/media/usb/hdpvr/hdpvr-video.c
@@ -308,7 +308,6 @@ static int hdpvr_start_streaming(struct hdpvr_device *dev)
dev->status = STATUS_STREAMING;
- INIT_WORK(&dev->worker, hdpvr_transmit_buffers);
schedule_work(&dev->worker);
v4l2_dbg(MSG_BUFFER, hdpvr_debug, &dev->v4l2_dev,
@@ -1165,6 +1164,9 @@ int hdpvr_register_videodev(struct hdpvr_device *dev, struct device *parent,
bool ac3 = dev->flags & HDPVR_FLAG_AC3_CAP;
int res;
+ // initialize dev->worker
+ INIT_WORK(&dev->worker, hdpvr_transmit_buffers);
+
dev->cur_std = V4L2_STD_525_60;
dev->width = 720;
dev->height = 480;
--
2.34.1
From: Jianglei Nie <[email protected]>
[ Upstream commit 3d950c34074ed74d2713c3856ba01264523289e6 ]
kfree_sensitive(ctx_p->user.key) will free the ctx_p->user.key. But
ctx_p->user.key is still used in the next line, which will lead to a
use after free.
We can call kfree_sensitive() after dev_dbg() to avoid the uaf.
Fixes: 63ee04c8b491 ("crypto: ccree - add skcipher support")
Signed-off-by: Jianglei Nie <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/crypto/ccree/cc_cipher.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/crypto/ccree/cc_cipher.c b/drivers/crypto/ccree/cc_cipher.c
index dafa6577a845..c289e4d5cbdc 100644
--- a/drivers/crypto/ccree/cc_cipher.c
+++ b/drivers/crypto/ccree/cc_cipher.c
@@ -254,8 +254,8 @@ static void cc_cipher_exit(struct crypto_tfm *tfm)
&ctx_p->user.key_dma_addr);
/* Free key buffer in context */
- kfree_sensitive(ctx_p->user.key);
dev_dbg(dev, "Free key buffer in context. key=@%p\n", ctx_p->user.key);
+ kfree_sensitive(ctx_p->user.key);
}
struct tdes_keys {
--
2.34.1
From: Xu Kuohai <[email protected]>
[ Upstream commit 4226961b0019b2e1612029e8950a9e911affc995 ]
Currently if a declaration appears in the BTF before the definition, the
definition is dumped as a conflicting name, e.g.:
$ bpftool btf dump file vmlinux format raw | grep "'unix_sock'"
[81287] FWD 'unix_sock' fwd_kind=struct
[89336] STRUCT 'unix_sock' size=1024 vlen=14
$ bpftool btf dump file vmlinux format c | grep "struct unix_sock"
struct unix_sock;
struct unix_sock___2 { <--- conflict, the "___2" is unexpected
struct unix_sock___2 *unix_sk;
This causes a compilation error if the dump output is used as a header file.
Fix it by skipping declaration when counting duplicated type names.
Fixes: 351131b51c7a ("libbpf: add btf_dump API for BTF-to-C conversion")
Signed-off-by: Xu Kuohai <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Song Liu <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
tools/lib/bpf/btf_dump.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/tools/lib/bpf/btf_dump.c b/tools/lib/bpf/btf_dump.c
index 0911aea4cdbe..bd22853be4a6 100644
--- a/tools/lib/bpf/btf_dump.c
+++ b/tools/lib/bpf/btf_dump.c
@@ -1416,6 +1416,11 @@ static const char *btf_dump_resolve_name(struct btf_dump *d, __u32 id,
if (s->name_resolved)
return *cached_name ? *cached_name : orig_name;
+ if (btf_is_fwd(t) || (btf_is_enum(t) && btf_vlen(t) == 0)) {
+ s->name_resolved = 1;
+ return orig_name;
+ }
+
dup_cnt = btf_dump_name_dups(d, name_map, orig_name);
if (dup_cnt > 1) {
const size_t max_len = 256;
--
2.34.1
From: Jiasheng Jiang <[email protected]>
[ Upstream commit e477e51a41cb5d6034f3c5ea85a71ad4613996b9 ]
As the potential failure of the devm_request_threaded_irq(),
it should be better to check the return value of the
mc13xxx_irq_request() and return error if fails.
Fixes: 8e00593557c3 ("mfd: Add mc13892 support to mc13xxx")
Signed-off-by: Jiasheng Jiang <[email protected]>
Signed-off-by: Lee Jones <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mfd/mc13xxx-core.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/mfd/mc13xxx-core.c b/drivers/mfd/mc13xxx-core.c
index 1abe7432aad8..e281a9202f11 100644
--- a/drivers/mfd/mc13xxx-core.c
+++ b/drivers/mfd/mc13xxx-core.c
@@ -323,8 +323,10 @@ int mc13xxx_adc_do_conversion(struct mc13xxx *mc13xxx, unsigned int mode,
adc1 |= MC13783_ADC1_ATOX;
dev_dbg(mc13xxx->dev, "%s: request irq\n", __func__);
- mc13xxx_irq_request(mc13xxx, MC13XXX_IRQ_ADCDONE,
+ ret = mc13xxx_irq_request(mc13xxx, MC13XXX_IRQ_ADCDONE,
mc13xxx_handler_adcdone, __func__, &adcdone_data);
+ if (ret)
+ goto out;
mc13xxx_reg_write(mc13xxx, MC13XXX_ADC0, adc0);
mc13xxx_reg_write(mc13xxx, MC13XXX_ADC1, adc1);
--
2.34.1
From: Jiasheng Jiang <[email protected]>
[ Upstream commit 405afed8a728f23cfaa02f75bbc8bdd6b7322123 ]
As the potential failure of the clk_enable(),
it should be better to check it and return error
if fails.
Fixes: ab6f6d85210c ("ASoC: fsi: add master clock control functions")
Signed-off-by: Jiasheng Jiang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/sh/fsi.c | 19 ++++++++++++++++---
1 file changed, 16 insertions(+), 3 deletions(-)
diff --git a/sound/soc/sh/fsi.c b/sound/soc/sh/fsi.c
index 3c574792231b..0fa72907d5bf 100644
--- a/sound/soc/sh/fsi.c
+++ b/sound/soc/sh/fsi.c
@@ -816,14 +816,27 @@ static int fsi_clk_enable(struct device *dev,
return ret;
}
- clk_enable(clock->xck);
- clk_enable(clock->ick);
- clk_enable(clock->div);
+ ret = clk_enable(clock->xck);
+ if (ret)
+ goto err;
+ ret = clk_enable(clock->ick);
+ if (ret)
+ goto disable_xck;
+ ret = clk_enable(clock->div);
+ if (ret)
+ goto disable_ick;
clock->count++;
}
return ret;
+
+disable_ick:
+ clk_disable(clock->ick);
+disable_xck:
+ clk_disable(clock->xck);
+err:
+ return ret;
}
static int fsi_clk_disable(struct device *dev,
--
2.34.1
From: Olga Kornievskaia <[email protected]>
[ Upstream commit 1d15d121cc2ad4d016a7dc1493132a9696f91fc5 ]
There is no reason to retry the operation if a session error had
occurred in such case result structure isn't filled out.
Fixes: dff58530c4ca ("NFSv4.1: fix handling of backchannel binding in BIND_CONN_TO_SESSION")
Signed-off-by: Olga Kornievskaia <[email protected]>
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/nfs/nfs4proc.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c
index d222a980164b..77199d356042 100644
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -8205,6 +8205,7 @@ nfs4_bind_one_conn_to_session_done(struct rpc_task *task, void *calldata)
case -NFS4ERR_DEADSESSION:
nfs4_schedule_session_recovery(clp->cl_session,
task->tk_status);
+ return;
}
if (args->dir == NFS4_CDFC4_FORE_OR_BOTH &&
res->dir != NFS4_CDFS4_BOTH) {
--
2.34.1
From: Robert Hancock <[email protected]>
[ Upstream commit 1d366c2f9df8279df2adbb60471f86fc40a1c39e ]
This driver is for an FPGA logic core, so there can be arbitrarily many
instances of the bus on a given system. Previously all of the I2C bus
names were "xiic-i2c" which caused issues with lm_sensors when trying to
map human-readable names to sensor inputs because it could not properly
distinguish the busses, for example. Append the platform device name to
the I2C bus name so it is unique between different instances.
Fixes: e1d5b6598cdc ("i2c: Add support for Xilinx XPS IIC Bus Interface")
Signed-off-by: Robert Hancock <[email protected]>
Tested-by: Michal Simek <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/i2c/busses/i2c-xiic.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c
index 2a8568b97c14..8dabb6ffb1a4 100644
--- a/drivers/i2c/busses/i2c-xiic.c
+++ b/drivers/i2c/busses/i2c-xiic.c
@@ -756,7 +756,6 @@ static const struct i2c_adapter_quirks xiic_quirks = {
static const struct i2c_adapter xiic_adapter = {
.owner = THIS_MODULE,
- .name = DRIVER_NAME,
.class = I2C_CLASS_DEPRECATED,
.algo = &xiic_algorithm,
.quirks = &xiic_quirks,
@@ -793,6 +792,8 @@ static int xiic_i2c_probe(struct platform_device *pdev)
i2c_set_adapdata(&i2c->adap, i2c);
i2c->adap.dev.parent = &pdev->dev;
i2c->adap.dev.of_node = pdev->dev.of_node;
+ snprintf(i2c->adap.name, sizeof(i2c->adap.name),
+ DRIVER_NAME " %s", pdev->name);
mutex_init(&i2c->lock);
init_waitqueue_head(&i2c->wait);
--
2.34.1
From: Mikulas Patocka <[email protected]>
commit cc09e8a9dec4f0e8299e80a7a2a8e6f54164a10b upstream.
Commit f6f72f32c22c ("dm integrity: don't replay journal data past the
end of the device") skips journal replay if the target sector points
beyond the end of the device. Unfortunatelly, it doesn't set the
journal entry unused, which resulted in this BUG being triggered:
BUG_ON(!journal_entry_is_unused(je))
Fix this by calling journal_entry_set_unused() for this case.
Fixes: f6f72f32c22c ("dm integrity: don't replay journal data past the end of the device")
Cc: [email protected] # v5.7+
Signed-off-by: Mikulas Patocka <[email protected]>
Tested-by: Milan Broz <[email protected]>
[snitzer: revised header]
Signed-off-by: Mike Snitzer <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/md/dm-integrity.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/drivers/md/dm-integrity.c
+++ b/drivers/md/dm-integrity.c
@@ -2354,9 +2354,11 @@ static void do_journal_write(struct dm_i
dm_integrity_io_error(ic, "invalid sector in journal", -EIO);
sec &= ~(sector_t)(ic->sectors_per_block - 1);
}
+ if (unlikely(sec >= ic->provided_data_sectors)) {
+ journal_entry_set_unused(je);
+ continue;
+ }
}
- if (unlikely(sec >= ic->provided_data_sectors))
- continue;
get_area_and_offset(ic, sec, &area, &offset);
restore_last_bytes(ic, access_journal_data(ic, i, j), je);
for (k = j + 1; k < ic->journal_section_entries; k++) {
From: Damien Le Moal <[email protected]>
[ Upstream commit 7f12845c8389855dbcc67baa068b6832dc4a396e ]
In pm80xx_send_abort_all(), the n_elem field of the ccb used is not
initialized to 0. This missing initialization sometimes lead to the task
completion path seeing the ccb with a non-zero n_elem resulting in the
execution of invalid dma_unmap_sg() calls in pm8001_ccb_task_free(),
causing a crash such as:
[ 197.676341] RIP: 0010:iommu_dma_unmap_sg+0x6d/0x280
[ 197.700204] RSP: 0018:ffff889bbcf89c88 EFLAGS: 00010012
[ 197.705485] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff83d0bda0
[ 197.712687] RDX: 0000000000000002 RSI: 0000000000000000 RDI: ffff88810dffc0d0
[ 197.719887] RBP: 0000000000000000 R08: 0000000000000000 R09: ffff8881c790098b
[ 197.727089] R10: ffffed1038f20131 R11: 0000000000000001 R12: 0000000000000000
[ 197.734296] R13: ffff88810dffc0d0 R14: 0000000000000010 R15: 0000000000000000
[ 197.741493] FS: 0000000000000000(0000) GS:ffff889bbcf80000(0000) knlGS:0000000000000000
[ 197.749659] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 197.755459] CR2: 00007f16c1b42734 CR3: 0000000004814000 CR4: 0000000000350ee0
[ 197.762656] Call Trace:
[ 197.765127] <IRQ>
[ 197.767162] pm8001_ccb_task_free+0x5f1/0x820 [pm80xx]
[ 197.772364] ? do_raw_spin_unlock+0x54/0x220
[ 197.776680] pm8001_mpi_task_abort_resp+0x2ce/0x4f0 [pm80xx]
[ 197.782406] process_oq+0xe85/0x7890 [pm80xx]
[ 197.786817] ? lock_acquire+0x194/0x490
[ 197.790697] ? handle_irq_event+0x10e/0x1b0
[ 197.794920] ? mpi_sata_completion+0x2d70/0x2d70 [pm80xx]
[ 197.800378] ? __wake_up_bit+0x100/0x100
[ 197.804340] ? lock_is_held_type+0x98/0x110
[ 197.808565] pm80xx_chip_isr+0x94/0x130 [pm80xx]
[ 197.813243] tasklet_action_common.constprop.0+0x24b/0x2f0
[ 197.818785] __do_softirq+0x1b5/0x82d
[ 197.822485] ? do_raw_spin_unlock+0x54/0x220
[ 197.826799] __irq_exit_rcu+0x17e/0x1e0
[ 197.830678] irq_exit_rcu+0xa/0x20
[ 197.834114] common_interrupt+0x78/0x90
[ 197.840051] </IRQ>
[ 197.844236] <TASK>
[ 197.848397] asm_common_interrupt+0x1e/0x40
Avoid this issue by always initializing the ccb n_elem field to 0 in
pm8001_send_abort_all(), pm8001_send_read_log() and
pm80xx_send_abort_all().
Link: https://lore.kernel.org/r/[email protected]
Fixes: c6b9ef5779c3 ("[SCSI] pm80xx: NCQ error handling changes")
Reviewed-by: Jack Wang <[email protected]>
Signed-off-by: Damien Le Moal <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/pm8001/pm8001_hwi.c | 2 ++
drivers/scsi/pm8001/pm80xx_hwi.c | 1 +
2 files changed, 3 insertions(+)
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index a9f317a4be70..cd0e1d31db70 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -1727,6 +1727,7 @@ static void pm8001_send_abort_all(struct pm8001_hba_info *pm8001_ha,
ccb->device = pm8001_ha_dev;
ccb->ccb_tag = ccb_tag;
ccb->task = task;
+ ccb->n_elem = 0;
circularQ = &pm8001_ha->inbnd_q_tbl[0];
@@ -1788,6 +1789,7 @@ static void pm8001_send_read_log(struct pm8001_hba_info *pm8001_ha,
ccb->device = pm8001_ha_dev;
ccb->ccb_tag = ccb_tag;
ccb->task = task;
+ ccb->n_elem = 0;
pm8001_ha_dev->id |= NCQ_READ_LOG_FLAG;
pm8001_ha_dev->id |= NCQ_2ND_RLE_FLAG;
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c
index 4427b4c232da..b5e60553acdc 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.c
+++ b/drivers/scsi/pm8001/pm80xx_hwi.c
@@ -1750,6 +1750,7 @@ static void pm80xx_send_abort_all(struct pm8001_hba_info *pm8001_ha,
ccb->device = pm8001_ha_dev;
ccb->ccb_tag = ccb_tag;
ccb->task = task;
+ ccb->n_elem = 0;
circularQ = &pm8001_ha->inbnd_q_tbl[0];
--
2.34.1
From: Steven Rostedt (Google) <[email protected]>
[ Upstream commit b3bc8547d3be60898818885f5bf22d0a62e2eb48 ]
The macro TRACE_DEFINE_ENUM is used to convert enums in the kernel to
their actual value when they are exported to user space via the trace
event format file.
Currently only the enums in the "print fmt" (TP_printk in the TRACE_EVENT
macro) have the enums converted. But the enums can be used to denote array
size:
field:unsigned int fc_ineligible_rc[EXT4_FC_REASON_MAX]; offset:12; size:36; signed:0;
The EXT4_FC_REASON_MAX has no meaning to userspace but it needs to know
that information to know how to parse the array.
Have the array indexes also be parsed as well.
Link: https://lore.kernel.org/all/[email protected]/
Reported-by: Ritesh Harjani <[email protected]>
Tested-by: Ritesh Harjani <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/trace/trace_events.c | 28 ++++++++++++++++++++++++++++
1 file changed, 28 insertions(+)
diff --git a/kernel/trace/trace_events.c b/kernel/trace/trace_events.c
index 7cc5f0a77c3c..bbafea929008 100644
--- a/kernel/trace/trace_events.c
+++ b/kernel/trace/trace_events.c
@@ -2417,6 +2417,33 @@ static void update_event_printk(struct trace_event_call *call,
}
}
+static void update_event_fields(struct trace_event_call *call,
+ struct trace_eval_map *map)
+{
+ struct ftrace_event_field *field;
+ struct list_head *head;
+ char *ptr;
+ int len = strlen(map->eval_string);
+
+ head = trace_get_fields(call);
+ list_for_each_entry(field, head, link) {
+ ptr = strchr(field->type, '[');
+ if (!ptr)
+ continue;
+ ptr++;
+
+ if (!isalpha(*ptr) && *ptr != '_')
+ continue;
+
+ if (strncmp(map->eval_string, ptr, len) != 0)
+ continue;
+
+ ptr = eval_replace(ptr, map, len);
+ /* enum/sizeof string smaller than value */
+ WARN_ON_ONCE(!ptr);
+ }
+}
+
void trace_event_eval_update(struct trace_eval_map **map, int len)
{
struct trace_event_call *call, *p;
@@ -2452,6 +2479,7 @@ void trace_event_eval_update(struct trace_eval_map **map, int len)
first = false;
}
update_event_printk(call, map[i]);
+ update_event_fields(call, map[i]);
}
}
}
--
2.34.1
From: Uwe Kleine-König <[email protected]>
[ Upstream commit 0401f24cd238ae200a23a13925f98de3d2c883b8 ]
When a driver calls pwmchip_add() it has to be prepared to immediately
get its callbacks called. So move allocation of driver data and hardware
initialization before the call to pwmchip_add().
This fixes a potential NULL pointer exception and a race condition on
register writes.
Fixes: 841e6f90bb78 ("pwm: NXP LPC18xx PWM/SCT driver")
Signed-off-by: Uwe Kleine-König <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pwm/pwm-lpc18xx-sct.c | 20 +++++++++-----------
1 file changed, 9 insertions(+), 11 deletions(-)
diff --git a/drivers/pwm/pwm-lpc18xx-sct.c b/drivers/pwm/pwm-lpc18xx-sct.c
index 5ff11145c1a3..9b15b6a79082 100644
--- a/drivers/pwm/pwm-lpc18xx-sct.c
+++ b/drivers/pwm/pwm-lpc18xx-sct.c
@@ -400,12 +400,6 @@ static int lpc18xx_pwm_probe(struct platform_device *pdev)
lpc18xx_pwm_writel(lpc18xx_pwm, LPC18XX_PWM_LIMIT,
BIT(lpc18xx_pwm->period_event));
- ret = pwmchip_add(&lpc18xx_pwm->chip);
- if (ret < 0) {
- dev_err(&pdev->dev, "pwmchip_add failed: %d\n", ret);
- goto disable_pwmclk;
- }
-
for (i = 0; i < lpc18xx_pwm->chip.npwm; i++) {
struct lpc18xx_pwm_data *data;
@@ -415,14 +409,12 @@ static int lpc18xx_pwm_probe(struct platform_device *pdev)
GFP_KERNEL);
if (!data) {
ret = -ENOMEM;
- goto remove_pwmchip;
+ goto disable_pwmclk;
}
pwm_set_chip_data(pwm, data);
}
- platform_set_drvdata(pdev, lpc18xx_pwm);
-
val = lpc18xx_pwm_readl(lpc18xx_pwm, LPC18XX_PWM_CTRL);
val &= ~LPC18XX_PWM_BIDIR;
val &= ~LPC18XX_PWM_CTRL_HALT;
@@ -430,10 +422,16 @@ static int lpc18xx_pwm_probe(struct platform_device *pdev)
val |= LPC18XX_PWM_PRE(0);
lpc18xx_pwm_writel(lpc18xx_pwm, LPC18XX_PWM_CTRL, val);
+ ret = pwmchip_add(&lpc18xx_pwm->chip);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "pwmchip_add failed: %d\n", ret);
+ goto disable_pwmclk;
+ }
+
+ platform_set_drvdata(pdev, lpc18xx_pwm);
+
return 0;
-remove_pwmchip:
- pwmchip_remove(&lpc18xx_pwm->chip);
disable_pwmclk:
clk_disable_unprepare(lpc18xx_pwm->pwm_clk);
return ret;
--
2.34.1
From: Jia-Ju Bai <[email protected]>
[ Upstream commit c91a5b1c221a58d008485cf7d02ccce73108b119 ]
The function device_create_file() in huawei_wmi_battery_add() can fail,
so its return value should be checked.
Fixes: 355a070b09ab ("platform/x86: huawei-wmi: Add battery charging thresholds")
Reported-by: TOTE Robot <[email protected]>
Signed-off-by: Jia-Ju Bai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Hans de Goede <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/platform/x86/huawei-wmi.c | 13 ++++++++++---
1 file changed, 10 insertions(+), 3 deletions(-)
diff --git a/drivers/platform/x86/huawei-wmi.c b/drivers/platform/x86/huawei-wmi.c
index a2d846c4a7ee..eac3e6b4ea11 100644
--- a/drivers/platform/x86/huawei-wmi.c
+++ b/drivers/platform/x86/huawei-wmi.c
@@ -470,10 +470,17 @@ static DEVICE_ATTR_RW(charge_control_thresholds);
static int huawei_wmi_battery_add(struct power_supply *battery)
{
- device_create_file(&battery->dev, &dev_attr_charge_control_start_threshold);
- device_create_file(&battery->dev, &dev_attr_charge_control_end_threshold);
+ int err = 0;
- return 0;
+ err = device_create_file(&battery->dev, &dev_attr_charge_control_start_threshold);
+ if (err)
+ return err;
+
+ err = device_create_file(&battery->dev, &dev_attr_charge_control_end_threshold);
+ if (err)
+ device_remove_file(&battery->dev, &dev_attr_charge_control_start_threshold);
+
+ return err;
}
static int huawei_wmi_battery_remove(struct power_supply *battery)
--
2.34.1
From: Pablo Neira Ayuso <[email protected]>
[ Upstream commit f2dd495a8d589371289981d5ed33e6873df94ecc ]
Do not reset IP_CT_TCP_FLAG_BE_LIBERAL flag in out-of-sync scenarios
coming before the TCP window tracking, otherwise such connections will
fail in the window check.
Update tcp_options() to leave this flag in place and add a new helper
function to reset the tcp window state.
Based on patch from Sven Auhagen.
Fixes: c4832c7bbc3f ("netfilter: nf_ct_tcp: improve out-of-sync situation in TCP tracking")
Tested-by: Sven Auhagen <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/netfilter/nf_conntrack_proto_tcp.c | 17 +++++++++++++----
1 file changed, 13 insertions(+), 4 deletions(-)
diff --git a/net/netfilter/nf_conntrack_proto_tcp.c b/net/netfilter/nf_conntrack_proto_tcp.c
index c8fb2187ad4b..3f785bdfa942 100644
--- a/net/netfilter/nf_conntrack_proto_tcp.c
+++ b/net/netfilter/nf_conntrack_proto_tcp.c
@@ -354,8 +354,8 @@ static void tcp_options(const struct sk_buff *skb,
length, buff);
BUG_ON(ptr == NULL);
- state->td_scale =
- state->flags = 0;
+ state->td_scale = 0;
+ state->flags &= IP_CT_TCP_FLAG_BE_LIBERAL;
while (length > 0) {
int opcode=*ptr++;
@@ -840,6 +840,16 @@ static bool nf_conntrack_tcp_established(const struct nf_conn *ct)
test_bit(IPS_ASSURED_BIT, &ct->status);
}
+static void nf_ct_tcp_state_reset(struct ip_ct_tcp_state *state)
+{
+ state->td_end = 0;
+ state->td_maxend = 0;
+ state->td_maxwin = 0;
+ state->td_maxack = 0;
+ state->td_scale = 0;
+ state->flags &= IP_CT_TCP_FLAG_BE_LIBERAL;
+}
+
/* Returns verdict for packet, or -1 for invalid. */
int nf_conntrack_tcp_packet(struct nf_conn *ct,
struct sk_buff *skb,
@@ -946,8 +956,7 @@ int nf_conntrack_tcp_packet(struct nf_conn *ct,
ct->proto.tcp.last_flags &= ~IP_CT_EXP_CHALLENGE_ACK;
ct->proto.tcp.seen[ct->proto.tcp.last_dir].flags =
ct->proto.tcp.last_flags;
- memset(&ct->proto.tcp.seen[dir], 0,
- sizeof(struct ip_ct_tcp_state));
+ nf_ct_tcp_state_reset(&ct->proto.tcp.seen[dir]);
break;
}
ct->proto.tcp.last_index = index;
--
2.34.1
From: Miaoqian Lin <[email protected]>
[ Upstream commit 6a4760463dbc6b603690938c468839985189ce0a ]
kobject_init_and_add() takes reference even when it fails.
According to the doc of kobject_init_and_add()：
If this function returns an error, kobject_put() must be called to
properly clean up the memory associated with the object.
Fix memory leak by calling kobject_put().
Fixes: 8c0984e5a753 ("power: move power supply drivers to power/supply")
Signed-off-by: Miaoqian Lin <[email protected]>
Signed-off-by: Sebastian Reichel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/power/supply/ab8500_fg.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/power/supply/ab8500_fg.c b/drivers/power/supply/ab8500_fg.c
index f1da757c939f..a6b4a94c2766 100644
--- a/drivers/power/supply/ab8500_fg.c
+++ b/drivers/power/supply/ab8500_fg.c
@@ -2541,8 +2541,10 @@ static int ab8500_fg_sysfs_init(struct ab8500_fg *di)
ret = kobject_init_and_add(&di->fg_kobject,
&ab8500_fg_ktype,
NULL, "battery");
- if (ret < 0)
+ if (ret < 0) {
+ kobject_put(&di->fg_kobject);
dev_err(di->dev, "failed to create sysfs entry\n");
+ }
return ret;
}
--
2.34.1
From: Jiasheng Jiang <[email protected]>
[ Upstream commit db0350da8084ad549bca16cc0486c11cc70a1f9b ]
As the potential failure of the wm8350_register_irq(),
it should be better to check it and return error if fails.
Also, use 'free_' in order to avoid the same code.
Fixes: a6ba2b2dabb5 ("ASoC: Implement WM8350 headphone jack detection")
Signed-off-by: Jiasheng Jiang <[email protected]>
Acked-by: Charles Keepax <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/codecs/wm8350.c | 28 ++++++++++++++++++++++++----
1 file changed, 24 insertions(+), 4 deletions(-)
diff --git a/sound/soc/codecs/wm8350.c b/sound/soc/codecs/wm8350.c
index a6aa212fa0c8..ec5d997725b9 100644
--- a/sound/soc/codecs/wm8350.c
+++ b/sound/soc/codecs/wm8350.c
@@ -1536,18 +1536,38 @@ static int wm8350_component_probe(struct snd_soc_component *component)
wm8350_clear_bits(wm8350, WM8350_JACK_DETECT,
WM8350_JDL_ENA | WM8350_JDR_ENA);
- wm8350_register_irq(wm8350, WM8350_IRQ_CODEC_JCK_DET_L,
+ ret = wm8350_register_irq(wm8350, WM8350_IRQ_CODEC_JCK_DET_L,
wm8350_hpl_jack_handler, 0, "Left jack detect",
priv);
- wm8350_register_irq(wm8350, WM8350_IRQ_CODEC_JCK_DET_R,
+ if (ret != 0)
+ goto err;
+
+ ret = wm8350_register_irq(wm8350, WM8350_IRQ_CODEC_JCK_DET_R,
wm8350_hpr_jack_handler, 0, "Right jack detect",
priv);
- wm8350_register_irq(wm8350, WM8350_IRQ_CODEC_MICSCD,
+ if (ret != 0)
+ goto free_jck_det_l;
+
+ ret = wm8350_register_irq(wm8350, WM8350_IRQ_CODEC_MICSCD,
wm8350_mic_handler, 0, "Microphone short", priv);
- wm8350_register_irq(wm8350, WM8350_IRQ_CODEC_MICD,
+ if (ret != 0)
+ goto free_jck_det_r;
+
+ ret = wm8350_register_irq(wm8350, WM8350_IRQ_CODEC_MICD,
wm8350_mic_handler, 0, "Microphone detect", priv);
+ if (ret != 0)
+ goto free_micscd;
return 0;
+
+free_micscd:
+ wm8350_free_irq(wm8350, WM8350_IRQ_CODEC_MICSCD, priv);
+free_jck_det_r:
+ wm8350_free_irq(wm8350, WM8350_IRQ_CODEC_JCK_DET_R, priv);
+free_jck_det_l:
+ wm8350_free_irq(wm8350, WM8350_IRQ_CODEC_JCK_DET_L, priv);
+err:
+ return ret;
}
static void wm8350_component_remove(struct snd_soc_component *component)
--
2.34.1
From: Xiaomeng Tong <[email protected]>
commit 0112f822f8a6d8039c94e0bc9b264d7ffc5d4704 upstream.
The bug is here:
err = snd_card_cs423x_pnp(dev, card->private_data, pdev, cdev);
The list iterator value 'cdev' will *always* be set and non-NULL
by list_for_each_entry(), so it is incorrect to assume that the
iterator value will be NULL if the list is empty or no element
is found.
To fix the bug, use a new variable 'iter' as the list iterator,
while use the original variable 'cdev' as a dedicated pointer
to point to the found element. And snd_card_cs423x_pnp() itself
has NULL check for cdev.
Cc: [email protected]
Fixes: c2b73d1458014 ("ALSA: cs4236: cs4232 and cs4236 driver merge to solve PnP BIOS detection")
Signed-off-by: Xiaomeng Tong <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/isa/cs423x/cs4236.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
--- a/sound/isa/cs423x/cs4236.c
+++ b/sound/isa/cs423x/cs4236.c
@@ -544,7 +544,7 @@ static int snd_cs423x_pnpbios_detect(str
static int dev;
int err;
struct snd_card *card;
- struct pnp_dev *cdev;
+ struct pnp_dev *cdev, *iter;
char cid[PNP_ID_LEN];
if (pnp_device_is_isapnp(pdev))
@@ -560,9 +560,11 @@ static int snd_cs423x_pnpbios_detect(str
strcpy(cid, pdev->id[0].id);
cid[5] = '1';
cdev = NULL;
- list_for_each_entry(cdev, &(pdev->protocol->devices), protocol_list) {
- if (!strcmp(cdev->id[0].id, cid))
+ list_for_each_entry(iter, &(pdev->protocol->devices), protocol_list) {
+ if (!strcmp(iter->id[0].id, cid)) {
+ cdev = iter;
break;
+ }
}
err = snd_cs423x_card_new(&pdev->dev, dev, &card);
if (err < 0)
From: Tom Rix <[email protected]>
[ Upstream commit 430e6a0212b2a0eb1de5e9d47a016fa79edf3978 ]
clang static analysis reports this represenative problem
amdgpu_smu.c:144:18: warning: The left operand of '*' is a garbage value
return clk_freq * 100;
~~~~~~~~ ^
If there is no get_dpm_ultimate_freq function,
smu_get_dpm_freq_range returns success without setting the
output min,max parameters. So return an -ENOTSUPP error.
Fixes: e5ef784b1e17 ("drm/amd/powerplay: revise calling chain on retrieving frequency range")
Signed-off-by: Tom Rix <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c b/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c
index e5893218fa4b..ee27970cfff9 100644
--- a/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c
+++ b/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c
@@ -115,7 +115,7 @@ int smu_get_dpm_freq_range(struct smu_context *smu,
uint32_t *min,
uint32_t *max)
{
- int ret = 0;
+ int ret = -ENOTSUPP;
if (!min && !max)
return -EINVAL;
--
2.34.1
From: Sakari Ailus <[email protected]>
commit babc92da5928f81af951663fc436997352e02d3a upstream.
__acpi_node_get_property_reference() is documented to return -ENOENT if
the caller requests a property reference at an index that does not exist,
not -EINVAL which it actually does.
Fix this by returning -ENOENT consistenly, independently of whether the
property value is a plain reference or a package.
Fixes: c343bc2ce2c6 ("ACPI: properties: Align return codes of __acpi_node_get_property_reference()")
Cc: 4.14+ <[email protected]> # 4.14+
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/acpi/property.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/acpi/property.c
+++ b/drivers/acpi/property.c
@@ -685,7 +685,7 @@ int __acpi_node_get_property_reference(c
*/
if (obj->type == ACPI_TYPE_LOCAL_REFERENCE) {
if (index)
- return -EINVAL;
+ return -ENOENT;
ret = acpi_bus_get_device(obj->reference.handle, &device);
if (ret)
From: Dan Carpenter <[email protected]>
[ Upstream commit dc0ce6cc4b133f5f2beb8b47dacae13a7d283c2c ]
The "test_dev" pointer is freed but then returned to the caller.
Fixes: d9c6a72d6fa2 ("kmod: add test driver to stress test the module loader")
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Luis Chamberlain <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
lib/test_kmod.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/lib/test_kmod.c b/lib/test_kmod.c
index eab52770070d..c637f6b5053a 100644
--- a/lib/test_kmod.c
+++ b/lib/test_kmod.c
@@ -1155,6 +1155,7 @@ static struct kmod_test_device *register_test_dev_kmod(void)
if (ret) {
pr_err("could not register misc device: %d\n", ret);
free_test_dev_kmod(test_dev);
+ test_dev = NULL;
goto out;
}
--
2.34.1
From: Yake Yang <[email protected]>
[ Upstream commit b062a0b9c1dc1ff63094337dccfe1568d5b62023 ]
Fix the following kernel oops in btmtksdio_interrrupt
[ 14.339134] btmtksdio_interrupt+0x28/0x54
[ 14.339139] process_sdio_pending_irqs+0x68/0x1a0
[ 14.339144] sdio_irq_work+0x40/0x70
[ 14.339154] process_one_work+0x184/0x39c
[ 14.339160] worker_thread+0x228/0x3e8
[ 14.339168] kthread+0x148/0x3ac
[ 14.339176] ret_from_fork+0x10/0x30
That happened because hdev->power_on is already called before
sdio_set_drvdata which btmtksdio_interrupt handler relies on is not
properly set up.
The details are shown as the below: hci_register_dev would run
queue_work(hdev->req_workqueue, &hdev->power_on) as WQ_HIGHPRI
workqueue_struct to complete the power-on sequeunce and thus hci_power_on
may run before sdio_set_drvdata is done in btmtksdio_probe.
The hci_dev_do_open in hci_power_on would initialize the device and enable
the interrupt and thus it is possible that btmtksdio_interrupt is being
called right before sdio_set_drvdata is filled out.
When btmtksdio_interrupt is being called and sdio_set_drvdata is not filled
, the kernel oops is going to happen because btmtksdio_interrupt access an
uninitialized pointer.
Fixes: 9aebfd4a2200 ("Bluetooth: mediatek: add support for MediaTek MT7663S and MT7668S SDIO devices")
Reviewed-by: Mark Chen <[email protected]>
Co-developed-by: Sean Wang <[email protected]>
Signed-off-by: Sean Wang <[email protected]>
Signed-off-by: Yake Yang <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/bluetooth/btmtksdio.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/bluetooth/btmtksdio.c b/drivers/bluetooth/btmtksdio.c
index 74856a586216..c41560be39fb 100644
--- a/drivers/bluetooth/btmtksdio.c
+++ b/drivers/bluetooth/btmtksdio.c
@@ -981,6 +981,8 @@ static int btmtksdio_probe(struct sdio_func *func,
hdev->manufacturer = 70;
set_bit(HCI_QUIRK_NON_PERSISTENT_SETUP, &hdev->quirks);
+ sdio_set_drvdata(func, bdev);
+
err = hci_register_dev(hdev);
if (err < 0) {
dev_err(&func->dev, "Can't register HCI device\n");
@@ -988,8 +990,6 @@ static int btmtksdio_probe(struct sdio_func *func,
return err;
}
- sdio_set_drvdata(func, bdev);
-
/* pm_runtime_enable would be done after the firmware is being
* downloaded because the core layer probably already enables
* runtime PM for this func such as the case host->caps &
--
2.34.1
From: Daniel Thompson <[email protected]>
[ Upstream commit 8030cb9a55688c1339edd284d9d6ce5f9fc75160 ]
Quoting the header comments, IRQF_ONESHOT is "Used by threaded interrupts
which need to keep the irq line disabled until the threaded handler has
been run.". When applied to an interrupt that doesn't request a threaded
irq then IRQF_ONESHOT has a lesser known (undocumented?) side effect,
which it to disable the forced threading of the irq. For "normal" kernels
(without forced threading) then, if there is no thread_fn, then
IRQF_ONESHOT is a nop.
In this case disabling forced threading is not appropriate for this driver
because it calls wake_up_all() and this API cannot be called from
no-thread interrupt handlers on PREEMPT_RT systems (deadlock risk, triggers
sleeping-while-atomic warnings).
Fix this by removing IRQF_ONESHOT.
Fixes: 2209481409b7 ("soc: qcom: Add AOSS QMP driver")
Signed-off-by: Daniel Thompson <[email protected]>
[bjorn: Added Fixes tag]
Signed-off-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/soc/qcom/qcom_aoss.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/soc/qcom/qcom_aoss.c b/drivers/soc/qcom/qcom_aoss.c
index 4fe88d4690e2..941499b11758 100644
--- a/drivers/soc/qcom/qcom_aoss.c
+++ b/drivers/soc/qcom/qcom_aoss.c
@@ -548,7 +548,7 @@ static int qmp_probe(struct platform_device *pdev)
}
irq = platform_get_irq(pdev, 0);
- ret = devm_request_irq(&pdev->dev, irq, qmp_intr, IRQF_ONESHOT,
+ ret = devm_request_irq(&pdev->dev, irq, qmp_intr, 0,
"aoss-qmp", qmp);
if (ret < 0) {
dev_err(&pdev->dev, "failed to request interrupt\n");
--
2.34.1
From: Matthew Wilcox (Oracle) <[email protected]>
commit 3e3c658055c002900982513e289398a1aad4a488 upstream.
If there is already an entry present that is of order >= XA_CHUNK_SHIFT
when we call xas_create_range(), xas_create_range() will misinterpret
that entry as a node and dereference xa_node->parent, generally leading
to a crash that looks something like this:
general protection fault, probably for non-canonical address 0xdffffc0000000001:
0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
CPU: 0 PID: 32 Comm: khugepaged Not tainted 5.17.0-rc8-syzkaller-00003-g56e337f2cf13 #0
RIP: 0010:xa_parent_locked include/linux/xarray.h:1207 [inline]
RIP: 0010:xas_create_range+0x2d9/0x6e0 lib/xarray.c:725
It's deterministically reproducable once you know what the problem is,
but producing it in a live kernel requires khugepaged to hit a race.
While the problem has been present since xas_create_range() was
introduced, I'm not aware of a way to hit it before the page cache was
converted to use multi-index entries.
Fixes: 6b24ca4a1a8d ("mm: Use multi-index entries in the page cache")
Reported-by: [email protected]
Signed-off-by: Matthew Wilcox (Oracle) <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
lib/test_xarray.c | 22 ++++++++++++++++++++++
lib/xarray.c | 2 ++
2 files changed, 24 insertions(+)
--- a/lib/test_xarray.c
+++ b/lib/test_xarray.c
@@ -1463,6 +1463,25 @@ unlock:
XA_BUG_ON(xa, !xa_empty(xa));
}
+static noinline void check_create_range_5(struct xarray *xa,
+ unsigned long index, unsigned int order)
+{
+ XA_STATE_ORDER(xas, xa, index, order);
+ unsigned int i;
+
+ xa_store_order(xa, index, order, xa_mk_index(index), GFP_KERNEL);
+
+ for (i = 0; i < order + 10; i++) {
+ do {
+ xas_lock(&xas);
+ xas_create_range(&xas);
+ xas_unlock(&xas);
+ } while (xas_nomem(&xas, GFP_KERNEL));
+ }
+
+ xa_destroy(xa);
+}
+
static noinline void check_create_range(struct xarray *xa)
{
unsigned int order;
@@ -1490,6 +1509,9 @@ static noinline void check_create_range(
check_create_range_4(xa, (3U << order) + 1, order);
check_create_range_4(xa, (3U << order) - 1, order);
check_create_range_4(xa, (1U << 24) + 1, order);
+
+ check_create_range_5(xa, 0, order);
+ check_create_range_5(xa, (1U << order), order);
}
check_create_range_3();
--- a/lib/xarray.c
+++ b/lib/xarray.c
@@ -722,6 +722,8 @@ void xas_create_range(struct xa_state *x
for (;;) {
struct xa_node *node = xas->xa_node;
+ if (node->shift >= shift)
+ break;
xas->xa_node = xa_parent_locked(xas->xa, node);
xas->xa_offset = node->offset - 1;
if (node->offset != 0)
From: Anssi Hannula <[email protected]>
[ Upstream commit 1d7286729aa616772be334eb908e11f527e1e291 ]
For a couple of times I have encountered a situation where
hv_balloon: Unhandled message: type: 12447
is being flooded over 1 million times per second with various values,
filling the log and consuming cycles, making debugging difficult.
Add rate limiting to the message.
Most other Hyper-V drivers already have similar rate limiting in their
message callbacks.
The cause of the floods in my case was probably fixed by 96d9d1fa5cd5
("Drivers: hv: balloon: account for vmbus packet header in
max_pkt_size").
Fixes: 9aa8b50b2b3d ("Drivers: hv: Add Hyper-V balloon driver")
Signed-off-by: Anssi Hannula <[email protected]>
Reviewed-by: Michael Kelley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Wei Liu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hv/hv_balloon.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/hv/hv_balloon.c b/drivers/hv/hv_balloon.c
index eb56e09ae15f..6a716996a625 100644
--- a/drivers/hv/hv_balloon.c
+++ b/drivers/hv/hv_balloon.c
@@ -1558,7 +1558,7 @@ static void balloon_onchannelcallback(void *context)
break;
default:
- pr_warn("Unhandled message: type: %d\n", dm_hdr->type);
+ pr_warn_ratelimited("Unhandled message: type: %d\n", dm_hdr->type);
}
}
--
2.34.1
From: Jonathan Neuschäfer <[email protected]>
[ Upstream commit d8a441e53e2434b1401e52dfd66b05263e442edc ]
In order that the end of a clk_div_table can be detected, it must be
terminated with a sentinel element (.div = 0).
In owl-s900.s, the { 0, 8 } element was probably meant to be just that,
so this patch changes { 0, 8 } to { 0, 0 }.
Fixes: d47317ca4ade1 ("clk: actions: Add S700 SoC clock support")
Fixes: d85d20053e195 ("clk: actions: Add S900 SoC clock support")
Signed-off-by: Jonathan Neuschäfer <[email protected]>
Reviewed-by: Manivannan Sadhasivam <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/actions/owl-s700.c | 1 +
drivers/clk/actions/owl-s900.c | 2 +-
2 files changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/actions/owl-s700.c b/drivers/clk/actions/owl-s700.c
index a2f34d13fb54..6ea7da1d6d75 100644
--- a/drivers/clk/actions/owl-s700.c
+++ b/drivers/clk/actions/owl-s700.c
@@ -162,6 +162,7 @@ static struct clk_div_table hdmia_div_table[] = {
static struct clk_div_table rmii_div_table[] = {
{0, 4}, {1, 10},
+ {0, 0}
};
/* divider clocks */
diff --git a/drivers/clk/actions/owl-s900.c b/drivers/clk/actions/owl-s900.c
index 790890978424..5144ada2c7e1 100644
--- a/drivers/clk/actions/owl-s900.c
+++ b/drivers/clk/actions/owl-s900.c
@@ -140,7 +140,7 @@ static struct clk_div_table rmii_ref_div_table[] = {
static struct clk_div_table usb3_mac_div_table[] = {
{ 1, 2 }, { 2, 3 }, { 3, 4 },
- { 0, 8 },
+ { 0, 0 }
};
static struct clk_div_table i2s_div_table[] = {
--
2.34.1
From: Chaitanya Kulkarni <[email protected]>
[ Upstream commit b27824d31f09ea7b4a6ba2c1b18bd328df3e8bed ]
sprintf does not know the PAGE_SIZE maximum of the temporary buffer
used for outputting sysfs content and it's possible to overrun the
PAGE_SIZE buffer length.
Use a generic sysfs_emit function that knows the size of the
temporary buffer and ensures that no overrun is done for offset
attribute in
loop_attr_[offset|sizelimit|autoclear|partscan|dio]_show() callbacks.
Signed-off-by: Chaitanya Kulkarni <[email protected]>
Reviewed-by: Himanshu Madhani <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/block/loop.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/block/loop.c b/drivers/block/loop.c
index ee537a9f1d1a..e4517d483bdc 100644
--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -797,33 +797,33 @@ static ssize_t loop_attr_backing_file_show(struct loop_device *lo, char *buf)
static ssize_t loop_attr_offset_show(struct loop_device *lo, char *buf)
{
- return sprintf(buf, "%llu\n", (unsigned long long)lo->lo_offset);
+ return sysfs_emit(buf, "%llu\n", (unsigned long long)lo->lo_offset);
}
static ssize_t loop_attr_sizelimit_show(struct loop_device *lo, char *buf)
{
- return sprintf(buf, "%llu\n", (unsigned long long)lo->lo_sizelimit);
+ return sysfs_emit(buf, "%llu\n", (unsigned long long)lo->lo_sizelimit);
}
static ssize_t loop_attr_autoclear_show(struct loop_device *lo, char *buf)
{
int autoclear = (lo->lo_flags & LO_FLAGS_AUTOCLEAR);
- return sprintf(buf, "%s\n", autoclear ? "1" : "0");
+ return sysfs_emit(buf, "%s\n", autoclear ? "1" : "0");
}
static ssize_t loop_attr_partscan_show(struct loop_device *lo, char *buf)
{
int partscan = (lo->lo_flags & LO_FLAGS_PARTSCAN);
- return sprintf(buf, "%s\n", partscan ? "1" : "0");
+ return sysfs_emit(buf, "%s\n", partscan ? "1" : "0");
}
static ssize_t loop_attr_dio_show(struct loop_device *lo, char *buf)
{
int dio = (lo->lo_flags & LO_FLAGS_DIRECT_IO);
- return sprintf(buf, "%s\n", dio ? "1" : "0");
+ return sysfs_emit(buf, "%s\n", dio ? "1" : "0");
}
LOOP_ATTR_RO(backing_file);
--
2.34.1
From: David Howells <[email protected]>
[ Upstream commit 3d8dcf278b1ee1eff1e90be848fa2237db4c07a7 ]
free_watch() does everything barring actually freeing the watch object. Fix
this by adding the missing kfree.
kmemleak produces a report something like the following. Note that as an
address can be seen in the first word, the watch would appear to have gone
through call_rcu().
BUG: memory leak
unreferenced object 0xffff88810ce4a200 (size 96):
comm "syz-executor352", pid 3605, jiffies 4294947473 (age 13.720s)
hex dump (first 32 bytes):
e0 82 48 0d 81 88 ff ff 00 00 00 00 00 00 00 00 ..H.............
80 a2 e4 0c 81 88 ff ff 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff8214e6cc>] kmalloc include/linux/slab.h:581 [inline]
[<ffffffff8214e6cc>] kzalloc include/linux/slab.h:714 [inline]
[<ffffffff8214e6cc>] keyctl_watch_key+0xec/0x2e0 security/keys/keyctl.c:1800
[<ffffffff8214ec84>] __do_sys_keyctl+0x3c4/0x490 security/keys/keyctl.c:2016
[<ffffffff84493a25>] do_syscall_x64 arch/x86/entry/common.c:50 [inline]
[<ffffffff84493a25>] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
[<ffffffff84600068>] entry_SYSCALL_64_after_hwframe+0x44/0xae
Fixes: c73be61cede5 ("pipe: Add general notification queue support")
Reported-and-tested-by: [email protected]
Signed-off-by: David Howells <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/watch_queue.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/kernel/watch_queue.c b/kernel/watch_queue.c
index 45a8eb90e5fc..a662abccf52c 100644
--- a/kernel/watch_queue.c
+++ b/kernel/watch_queue.c
@@ -398,6 +398,7 @@ static void free_watch(struct rcu_head *rcu)
put_watch_queue(rcu_access_pointer(watch->queue));
atomic_dec(&watch->cred->user->nr_watches);
put_cred(watch->cred);
+ kfree(watch);
}
static void __put_watch(struct kref *kref)
--
2.34.1
From: Jakob Koschel <[email protected]>
[ Upstream commit 9f1f4b642451d35667a4dc6a9c0a89d954b530a3 ]
'dev' will *always* be set by list_for_each_entry().
It is incorrect to assume that the iterator value will be NULL if the
list is empty.
Instead of checking the pointer it should be checked if
the list is empty.
Fixes: 79dd0c69f05f ("V4L: 925: saa7134 alsa is now a standalone module")
Signed-off-by: Jakob Koschel <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/pci/saa7134/saa7134-alsa.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/media/pci/saa7134/saa7134-alsa.c b/drivers/media/pci/saa7134/saa7134-alsa.c
index fb24d2ed3621..d3cde05a6eba 100644
--- a/drivers/media/pci/saa7134/saa7134-alsa.c
+++ b/drivers/media/pci/saa7134/saa7134-alsa.c
@@ -1214,7 +1214,7 @@ static int alsa_device_exit(struct saa7134_dev *dev)
static int saa7134_alsa_init(void)
{
- struct saa7134_dev *dev = NULL;
+ struct saa7134_dev *dev;
saa7134_dmasound_init = alsa_device_init;
saa7134_dmasound_exit = alsa_device_exit;
@@ -1229,7 +1229,7 @@ static int saa7134_alsa_init(void)
alsa_device_init(dev);
}
- if (dev == NULL)
+ if (list_empty(&saa7134_devlist))
pr_info("saa7134 ALSA: no saa7134 cards found\n");
return 0;
--
2.34.1
From: Sam Ravnborg <[email protected]>
[ Upstream commit 4aca4dbcac9d8eed8a8dc15b6883270a20a84218 ]
The controlfb driver has a number of dummy defines for IO operations.
They were introduced in commit a07a63b0e24d
("video: fbdev: controlfb: add COMPILE_TEST support").
The write variants did not use their value parameter in the
dummy versions, resulting in set but not used warnings.
Fix this by adding "(void)val" to silence the compiler.
Signed-off-by: Sam Ravnborg <[email protected]>
Acked-by: Thomas Zimmermann <[email protected]>
Cc: Sam Ravnborg <[email protected]>
Cc: Bartlomiej Zolnierkiewicz <[email protected]>
Cc: "Gustavo A. R. Silva" <[email protected]>
Cc: Michael Ellerman <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/video/fbdev/controlfb.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/video/fbdev/controlfb.c b/drivers/video/fbdev/controlfb.c
index 2df56bd303d2..509311471d51 100644
--- a/drivers/video/fbdev/controlfb.c
+++ b/drivers/video/fbdev/controlfb.c
@@ -64,9 +64,9 @@
#undef in_le32
#undef out_le32
#define in_8(addr) 0
-#define out_8(addr, val)
+#define out_8(addr, val) (void)(val)
#define in_le32(addr) 0
-#define out_le32(addr, val)
+#define out_le32(addr, val) (void)(val)
#define pgprot_cached_wthru(prot) (prot)
#else
static void invalid_vram_cache(void __force *addr)
--
2.34.1
From: Adrian Hunter <[email protected]>
[ Upstream commit e5524bf1047eb3b3f3f33b5f59897ba67b3ade87 ]
Change from shifting 'unsigned long' to 'u64' to prevent the config bits
being lost on a 32-bit kernel.
Fixes: eadf48cab4b6b0 ("perf/x86/intel/pt: Add support for address range filtering in PT")
Signed-off-by: Adrian Hunter <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/events/intel/pt.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/x86/events/intel/pt.c b/arch/x86/events/intel/pt.c
index c084899e9582..cc3b79c06685 100644
--- a/arch/x86/events/intel/pt.c
+++ b/arch/x86/events/intel/pt.c
@@ -472,7 +472,7 @@ static u64 pt_config_filters(struct perf_event *event)
pt->filters.filter[range].msr_b = filter->msr_b;
}
- rtit_ctl |= filter->config << pt_address_ranges[range].reg_off;
+ rtit_ctl |= (u64)filter->config << pt_address_ranges[range].reg_off;
}
return rtit_ctl;
--
2.34.1
From: Anders Roxell <[email protected]>
commit 8667d0d64dd1f84fd41b5897fd87fa9113ae05e3 upstream.
Building tinyconfig with gcc (Debian 11.2.0-16) and assembler (Debian
2.37.90.20220207) the following build error shows up:
{standard input}: Assembler messages:
{standard input}:1190: Error: unrecognized opcode: `stbcix'
{standard input}:1433: Error: unrecognized opcode: `lwzcix'
{standard input}:1453: Error: unrecognized opcode: `stbcix'
{standard input}:1460: Error: unrecognized opcode: `stwcix'
{standard input}:1596: Error: unrecognized opcode: `stbcix'
...
Rework to add assembler directives [1] around the instruction. Going
through them one by one shows that the changes should be safe. Like
__get_user_atomic_128_aligned() is only called in p9_hmi_special_emu(),
which according to the name is specific to power9. And __raw_rm_read*()
are only called in things that are powernv or book3s_hv specific.
[1] https://sourceware.org/binutils/docs/as/PowerPC_002dPseudo.html#PowerPC_002dPseudo
Cc: [email protected]
Co-developed-by: Arnd Bergmann <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Anders Roxell <[email protected]>
Reviewed-by: Segher Boessenkool <[email protected]>
[mpe: Make commit subject more descriptive]
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/include/asm/io.h | 40 ++++++++++++++++++++++++++++-------
arch/powerpc/include/asm/uaccess.h | 3 ++
arch/powerpc/platforms/powernv/rng.c | 6 ++++-
3 files changed, 40 insertions(+), 9 deletions(-)
--- a/arch/powerpc/include/asm/io.h
+++ b/arch/powerpc/include/asm/io.h
@@ -344,25 +344,37 @@ static inline void __raw_writeq_be(unsig
*/
static inline void __raw_rm_writeb(u8 val, volatile void __iomem *paddr)
{
- __asm__ __volatile__("stbcix %0,0,%1"
+ __asm__ __volatile__(".machine push; \
+ .machine power6; \
+ stbcix %0,0,%1; \
+ .machine pop;"
: : "r" (val), "r" (paddr) : "memory");
}
static inline void __raw_rm_writew(u16 val, volatile void __iomem *paddr)
{
- __asm__ __volatile__("sthcix %0,0,%1"
+ __asm__ __volatile__(".machine push; \
+ .machine power6; \
+ sthcix %0,0,%1; \
+ .machine pop;"
: : "r" (val), "r" (paddr) : "memory");
}
static inline void __raw_rm_writel(u32 val, volatile void __iomem *paddr)
{
- __asm__ __volatile__("stwcix %0,0,%1"
+ __asm__ __volatile__(".machine push; \
+ .machine power6; \
+ stwcix %0,0,%1; \
+ .machine pop;"
: : "r" (val), "r" (paddr) : "memory");
}
static inline void __raw_rm_writeq(u64 val, volatile void __iomem *paddr)
{
- __asm__ __volatile__("stdcix %0,0,%1"
+ __asm__ __volatile__(".machine push; \
+ .machine power6; \
+ stdcix %0,0,%1; \
+ .machine pop;"
: : "r" (val), "r" (paddr) : "memory");
}
@@ -374,7 +386,10 @@ static inline void __raw_rm_writeq_be(u6
static inline u8 __raw_rm_readb(volatile void __iomem *paddr)
{
u8 ret;
- __asm__ __volatile__("lbzcix %0,0, %1"
+ __asm__ __volatile__(".machine push; \
+ .machine power6; \
+ lbzcix %0,0, %1; \
+ .machine pop;"
: "=r" (ret) : "r" (paddr) : "memory");
return ret;
}
@@ -382,7 +397,10 @@ static inline u8 __raw_rm_readb(volatile
static inline u16 __raw_rm_readw(volatile void __iomem *paddr)
{
u16 ret;
- __asm__ __volatile__("lhzcix %0,0, %1"
+ __asm__ __volatile__(".machine push; \
+ .machine power6; \
+ lhzcix %0,0, %1; \
+ .machine pop;"
: "=r" (ret) : "r" (paddr) : "memory");
return ret;
}
@@ -390,7 +408,10 @@ static inline u16 __raw_rm_readw(volatil
static inline u32 __raw_rm_readl(volatile void __iomem *paddr)
{
u32 ret;
- __asm__ __volatile__("lwzcix %0,0, %1"
+ __asm__ __volatile__(".machine push; \
+ .machine power6; \
+ lwzcix %0,0, %1; \
+ .machine pop;"
: "=r" (ret) : "r" (paddr) : "memory");
return ret;
}
@@ -398,7 +419,10 @@ static inline u32 __raw_rm_readl(volatil
static inline u64 __raw_rm_readq(volatile void __iomem *paddr)
{
u64 ret;
- __asm__ __volatile__("ldcix %0,0, %1"
+ __asm__ __volatile__(".machine push; \
+ .machine power6; \
+ ldcix %0,0, %1; \
+ .machine pop;"
: "=r" (ret) : "r" (paddr) : "memory");
return ret;
}
--- a/arch/powerpc/include/asm/uaccess.h
+++ b/arch/powerpc/include/asm/uaccess.h
@@ -229,8 +229,11 @@ extern long __get_user_bad(void);
*/
#define __get_user_atomic_128_aligned(kaddr, uaddr, err) \
__asm__ __volatile__( \
+ ".machine push\n" \
+ ".machine altivec\n" \
"1: lvx 0,0,%1 # get user\n" \
" stvx 0,0,%2 # put kernel\n" \
+ ".machine pop\n" \
"2:\n" \
".section .fixup,\"ax\"\n" \
"3: li %0,%3\n" \
--- a/arch/powerpc/platforms/powernv/rng.c
+++ b/arch/powerpc/platforms/powernv/rng.c
@@ -43,7 +43,11 @@ static unsigned long rng_whiten(struct p
unsigned long parity;
/* Calculate the parity of the value */
- asm ("popcntd %0,%1" : "=r" (parity) : "r" (val));
+ asm (".machine push; \
+ .machine power7; \
+ popcntd %0,%1; \
+ .machine pop;"
+ : "=r" (parity) : "r" (val));
/* xor our value with the previous mask */
val ^= rng->mask;
From: Randy Dunlap <[email protected]>
[ Upstream commit ba7ffcd4c4da374b0f64666354eeeda7d3827131 ]
If an invalid value is used in "resumedelay=<seconds>", it is
silently ignored. Add a warning message and then let the __setup
handler return 1 to indicate that the kernel command line option
has been handled.
Fixes: 317cf7e5e85e3 ("PM / hibernate: convert simple_strtoul to kstrtoul")
Signed-off-by: Randy Dunlap <[email protected]>
Reported-by: Igor Zhbanov <[email protected]>
Link: lore.kernel.org/r/[email protected]
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/power/hibernate.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/kernel/power/hibernate.c b/kernel/power/hibernate.c
index bf640fd6142a..522cb1387462 100644
--- a/kernel/power/hibernate.c
+++ b/kernel/power/hibernate.c
@@ -1323,7 +1323,7 @@ static int __init resumedelay_setup(char *str)
int rc = kstrtouint(str, 0, &resume_delay);
if (rc)
- return rc;
+ pr_warn("resumedelay: bad option string '%s'\n", str);
return 1;
}
--
2.34.1
From: Ang Tien Sung <[email protected]>
commit b850b7a8b369322adf699ef48ceff4d902525c8c upstream.
Fix a bug whereby, the return response of parameter a1 from an
SMC call is not properly set to the callback data during an
INTEL_SIP_SMC_RSU_ERROR command.
Link: https://lore.kernel.org/lkml/[email protected]
Fixes: 6b50d882d38d ("firmware: add remote status update client support")
Cc: [email protected]
Signed-off-by: Ang Tien Sung <[email protected]>
Signed-off-by: Dinh Nguyen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/firmware/stratix10-svc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/firmware/stratix10-svc.c
+++ b/drivers/firmware/stratix10-svc.c
@@ -477,7 +477,7 @@ static int svc_normal_to_secure_thread(v
case INTEL_SIP_SMC_RSU_ERROR:
pr_err("%s: STATUS_ERROR\n", __func__);
cbdata->status = BIT(SVC_STATUS_ERROR);
- cbdata->kaddr1 = NULL;
+ cbdata->kaddr1 = &res.a1;
cbdata->kaddr2 = NULL;
cbdata->kaddr3 = NULL;
pdata->chan->scl->receive_cb(pdata->chan->scl, cbdata);
From: Lucas Tanure <[email protected]>
[ Upstream commit cb13aa16f34f794a9cee2626862af8a95f0f0ee9 ]
Having meson_i2c_set_clk_div after i2c_add_adapter
causes issues for client drivers that try to use
the bus before the requested speed is applied.
The bus can be used just after i2c_add_adapter, so
move i2c_add_adapter to the final step as
meson_i2c_set_clk_div needs to be called before
the bus is used.
Fixes: 09af1c2fa490 ("i2c: meson: set clock divider in probe instead of setting it for each transfer")
Signed-off-by: Lucas Tanure <[email protected]>
Reviewed-by: Neil Armstrong <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/i2c/busses/i2c-meson.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/i2c/busses/i2c-meson.c b/drivers/i2c/busses/i2c-meson.c
index ef73a42577cc..07eb819072c4 100644
--- a/drivers/i2c/busses/i2c-meson.c
+++ b/drivers/i2c/busses/i2c-meson.c
@@ -465,18 +465,18 @@ static int meson_i2c_probe(struct platform_device *pdev)
*/
meson_i2c_set_mask(i2c, REG_CTRL, REG_CTRL_START, 0);
- ret = i2c_add_adapter(&i2c->adap);
- if (ret < 0) {
- clk_disable_unprepare(i2c->clk);
- return ret;
- }
-
/* Disable filtering */
meson_i2c_set_mask(i2c, REG_SLAVE_ADDR,
REG_SLV_SDA_FILTER | REG_SLV_SCL_FILTER, 0);
meson_i2c_set_clk_div(i2c, timings.bus_freq_hz);
+ ret = i2c_add_adapter(&i2c->adap);
+ if (ret < 0) {
+ clk_disable_unprepare(i2c->clk);
+ return ret;
+ }
+
return 0;
}
--
2.34.1
From: Miaoqian Lin <[email protected]>
[ Upstream commit c09ac191b1f97cfa06f394dbfd7a5db07986cefc ]
This node pointer is returned by of_parse_phandle() with refcount
incremented in this function. Calling of_node_put() to avoid
the refcount leak.
Fixes: 32e67eee670e ("pinctrl: nomadik: Allow prcm_base to be extracted from Device Tree")
Signed-off-by: Miaoqian Lin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pinctrl/nomadik/pinctrl-nomadik.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/pinctrl/nomadik/pinctrl-nomadik.c b/drivers/pinctrl/nomadik/pinctrl-nomadik.c
index 657e35a75d84..6d77feda9090 100644
--- a/drivers/pinctrl/nomadik/pinctrl-nomadik.c
+++ b/drivers/pinctrl/nomadik/pinctrl-nomadik.c
@@ -1883,8 +1883,10 @@ static int nmk_pinctrl_probe(struct platform_device *pdev)
}
prcm_np = of_parse_phandle(np, "prcm", 0);
- if (prcm_np)
+ if (prcm_np) {
npct->prcm_base = of_iomap(prcm_np, 0);
+ of_node_put(prcm_np);
+ }
if (!npct->prcm_base) {
if (version == PINCTRL_NMK_STN8815) {
dev_info(&pdev->dev,
--
2.34.1
From: Dirk Buchwalder <[email protected]>
[ Upstream commit b77d8306d84f83d1da68028a68c91da9c867b6f6 ]
Use floor ops on SDCC1 APPS clock in order to round down selected clock
frequency and avoid overclocking SD/eMMC cards.
For example, currently HS200 cards were failling tuning as they were
actually being clocked at 384MHz instead of 192MHz.
This caused some boards to disable 1.8V I/O and force the eMMC into the
standard HS mode (50MHz) and that appeared to work despite the eMMC being
overclocked to 96Mhz in that case.
There was a previous commit to use floor ops on SDCC clocks, but it looks
to have only covered SDCC2 clock.
Fixes: 9607f6224b39 ("clk: qcom: ipq8074: add PCIE, USB and SDCC clocks")
Signed-off-by: Dirk Buchwalder <[email protected]>
Signed-off-by: Robert Marko <[email protected]>
Reviewed-by: Stephen Boyd <[email protected]>
Signed-off-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/qcom/gcc-ipq8074.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/clk/qcom/gcc-ipq8074.c b/drivers/clk/qcom/gcc-ipq8074.c
index b09d99343e09..541016db3c4b 100644
--- a/drivers/clk/qcom/gcc-ipq8074.c
+++ b/drivers/clk/qcom/gcc-ipq8074.c
@@ -1074,7 +1074,7 @@ static struct clk_rcg2 sdcc1_apps_clk_src = {
.name = "sdcc1_apps_clk_src",
.parent_names = gcc_xo_gpll0_gpll2_gpll0_out_main_div2,
.num_parents = 4,
- .ops = &clk_rcg2_ops,
+ .ops = &clk_rcg2_floor_ops,
},
};
--
2.34.1
From: Miaoqian Lin <[email protected]>
[ Upstream commit 4f92724d4b92c024e721063f520d66e11ca4b54b ]
This func misses checking for platform_get_irq()'s call and may passes the
negative error codes to request_threaded_irq(), which takes unsigned IRQ #,
causing it to fail with -EINVAL, overriding an original error code.
Stop calling request_threaded_irq() with invalid IRQ #s.
Fixes: f333a331adfa ("spi/tegra114: add spi driver")
Signed-off-by: Miaoqian Lin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/spi/spi-tegra114.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/spi/spi-tegra114.c b/drivers/spi/spi-tegra114.c
index a2e5907276e7..ed42665b1224 100644
--- a/drivers/spi/spi-tegra114.c
+++ b/drivers/spi/spi-tegra114.c
@@ -1353,6 +1353,10 @@ static int tegra_spi_probe(struct platform_device *pdev)
tspi->phys = r->start;
spi_irq = platform_get_irq(pdev, 0);
+ if (spi_irq < 0) {
+ ret = spi_irq;
+ goto exit_free_master;
+ }
tspi->irq = spi_irq;
tspi->clk = devm_clk_get(&pdev->dev, "spi");
--
2.34.1
From: Richard Leitner <[email protected]>
[ Upstream commit 0092c25b541a5422d7e71892a13c55ee91abc34b ]
This patch fixes the tristate configuration for i2c3 function assigned
to the dtf pins on the Tamonten Tegra20 SoM.
Signed-off-by: Richard Leitner <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/tegra20-tamonten.dtsi | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/tegra20-tamonten.dtsi b/arch/arm/boot/dts/tegra20-tamonten.dtsi
index dd4d506683de..7f14f0d005c3 100644
--- a/arch/arm/boot/dts/tegra20-tamonten.dtsi
+++ b/arch/arm/boot/dts/tegra20-tamonten.dtsi
@@ -183,8 +183,8 @@
};
conf_ata {
nvidia,pins = "ata", "atb", "atc", "atd", "ate",
- "cdev1", "cdev2", "dap1", "dtb", "gma",
- "gmb", "gmc", "gmd", "gme", "gpu7",
+ "cdev1", "cdev2", "dap1", "dtb", "dtf",
+ "gma", "gmb", "gmc", "gmd", "gme", "gpu7",
"gpv", "i2cp", "irrx", "irtx", "pta",
"rm", "slxa", "slxk", "spia", "spib",
"uac";
@@ -203,7 +203,7 @@
};
conf_crtp {
nvidia,pins = "crtp", "dap2", "dap3", "dap4",
- "dtc", "dte", "dtf", "gpu", "sdio1",
+ "dtc", "dte", "gpu", "sdio1",
"slxc", "slxd", "spdi", "spdo", "spig",
"uda";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
--
2.34.1
From: Randy Dunlap <[email protected]>
[ Upstream commit 97bf0395c226907e1a9b908511a35192bf1e09bb ]
Include the DECstation interrupt handler in opting out of
FPU support.
Fixes a linker error:
mips-linux-ld: arch/mips/dec/int-handler.o: in function `fpu':
(.text+0x148): undefined reference to `handle_fpe_int'
Fixes: 183b40f992c8 ("MIPS: Allow FP support to be disabled")
Signed-off-by: Randy Dunlap <[email protected]>
Reported-by: kernel test robot <[email protected]>
Cc: Paul Burton <[email protected]>
Cc: Thomas Bogendoerfer <[email protected]>
Cc: Maciej W. Rozycki <[email protected]>
Cc: [email protected]
Acked-by: Maciej W. Rozycki <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/mips/dec/int-handler.S | 6 +++---
arch/mips/dec/setup.c | 3 ++-
2 files changed, 5 insertions(+), 4 deletions(-)
diff --git a/arch/mips/dec/int-handler.S b/arch/mips/dec/int-handler.S
index ea5b5a83f1e1..011d1d678840 100644
--- a/arch/mips/dec/int-handler.S
+++ b/arch/mips/dec/int-handler.S
@@ -131,7 +131,7 @@
*/
mfc0 t0,CP0_CAUSE # get pending interrupts
mfc0 t1,CP0_STATUS
-#ifdef CONFIG_32BIT
+#if defined(CONFIG_32BIT) && defined(CONFIG_MIPS_FP_SUPPORT)
lw t2,cpu_fpu_mask
#endif
andi t0,ST0_IM # CAUSE.CE may be non-zero!
@@ -139,7 +139,7 @@
beqz t0,spurious
-#ifdef CONFIG_32BIT
+#if defined(CONFIG_32BIT) && defined(CONFIG_MIPS_FP_SUPPORT)
and t2,t0
bnez t2,fpu # handle FPU immediately
#endif
@@ -280,7 +280,7 @@ handle_it:
j dec_irq_dispatch
nop
-#ifdef CONFIG_32BIT
+#if defined(CONFIG_32BIT) && defined(CONFIG_MIPS_FP_SUPPORT)
fpu:
lw t0,fpu_kstat_irq
nop
diff --git a/arch/mips/dec/setup.c b/arch/mips/dec/setup.c
index eaad0ed4b523..99b9b29750db 100644
--- a/arch/mips/dec/setup.c
+++ b/arch/mips/dec/setup.c
@@ -746,7 +746,8 @@ void __init arch_init_irq(void)
dec_interrupt[DEC_IRQ_HALT] = -1;
/* Register board interrupts: FPU and cascade. */
- if (dec_interrupt[DEC_IRQ_FPU] >= 0 && cpu_has_fpu) {
+ if (IS_ENABLED(CONFIG_MIPS_FP_SUPPORT) &&
+ dec_interrupt[DEC_IRQ_FPU] >= 0 && cpu_has_fpu) {
struct irq_desc *desc_fpu;
int irq_fpu;
--
2.34.1
From: Tom Rix <[email protected]>
commit fa7b514d2b2894e052b8e94c7a29feb98e90093f upstream.
Clang static analysis reports this issue:
| mcp251xfd-core.c:1813:7: warning: The left operand
| of '&' is a garbage value
| FIELD_GET(MCP251XFD_REG_DEVID_ID_MASK, dev_id),
| ^ ~~~~~~
dev_id is set in a successful call to mcp251xfd_register_get_dev_id().
Though the status of calls made by mcp251xfd_register_get_dev_id() are
checked and handled, their status' are not returned. So return err.
Fixes: 55e5b97f003e ("can: mcp25xxfd: add driver for Microchip MCP25xxFD SPI CAN")
Link: https://lore.kernel.org/all/[email protected]
Signed-off-by: Tom Rix <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c
+++ b/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c
@@ -2578,7 +2578,7 @@ mcp251xfd_register_get_dev_id(const stru
out_kfree_buf_rx:
kfree(buf_rx);
- return 0;
+ return err;
}
#define MCP251XFD_QUIRK_ACTIVE(quirk) \
From: Ritesh Harjani <[email protected]>
commit 7af1974af0a9ba8a8ed2e3e947d87dd4d9a78d27 upstream.
ftrace's __print_symbolic() requires that any enum values used in the
symbol to string translation table be wrapped in a TRACE_DEFINE_ENUM
so that the enum value can be decoded from the ftrace ring buffer by
user space tooling.
This patch also fixes few other problems found in this trace point.
e.g. dereferencing structures in TP_printk which should not be done
at any cost.
Also to avoid checkpatch warnings, this patch removes those
whitespaces/tab stops issues.
Cc: [email protected]
Fixes: aa75f4d3daae ("ext4: main fast-commit commit path")
Reported-by: Steven Rostedt <[email protected]>
Signed-off-by: Ritesh Harjani <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Reviewed-by: Steven Rostedt (Google) <[email protected]>
Reviewed-by: Harshad Shirwadkar <[email protected]>
Link: https://lore.kernel.org/r/b4b9691414c35c62e570b723e661c80674169f9a.1647057583.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/trace/events/ext4.h | 80 +++++++++++++++++++++++++++-----------------
1 file changed, 50 insertions(+), 30 deletions(-)
--- a/include/trace/events/ext4.h
+++ b/include/trace/events/ext4.h
@@ -95,6 +95,17 @@ TRACE_DEFINE_ENUM(ES_REFERENCED_B);
{ FALLOC_FL_COLLAPSE_RANGE, "COLLAPSE_RANGE"}, \
{ FALLOC_FL_ZERO_RANGE, "ZERO_RANGE"})
+TRACE_DEFINE_ENUM(EXT4_FC_REASON_XATTR);
+TRACE_DEFINE_ENUM(EXT4_FC_REASON_CROSS_RENAME);
+TRACE_DEFINE_ENUM(EXT4_FC_REASON_JOURNAL_FLAG_CHANGE);
+TRACE_DEFINE_ENUM(EXT4_FC_REASON_NOMEM);
+TRACE_DEFINE_ENUM(EXT4_FC_REASON_SWAP_BOOT);
+TRACE_DEFINE_ENUM(EXT4_FC_REASON_RESIZE);
+TRACE_DEFINE_ENUM(EXT4_FC_REASON_RENAME_DIR);
+TRACE_DEFINE_ENUM(EXT4_FC_REASON_FALLOC_RANGE);
+TRACE_DEFINE_ENUM(EXT4_FC_REASON_INODE_JOURNAL_DATA);
+TRACE_DEFINE_ENUM(EXT4_FC_REASON_MAX);
+
#define show_fc_reason(reason) \
__print_symbolic(reason, \
{ EXT4_FC_REASON_XATTR, "XATTR"}, \
@@ -2899,41 +2910,50 @@ TRACE_EVENT(ext4_fc_commit_stop,
#define FC_REASON_NAME_STAT(reason) \
show_fc_reason(reason), \
- __entry->sbi->s_fc_stats.fc_ineligible_reason_count[reason]
+ __entry->fc_ineligible_rc[reason]
TRACE_EVENT(ext4_fc_stats,
- TP_PROTO(struct super_block *sb),
+ TP_PROTO(struct super_block *sb),
+
+ TP_ARGS(sb),
+
+ TP_STRUCT__entry(
+ __field(dev_t, dev)
+ __array(unsigned int, fc_ineligible_rc, EXT4_FC_REASON_MAX)
+ __field(unsigned long, fc_commits)
+ __field(unsigned long, fc_ineligible_commits)
+ __field(unsigned long, fc_numblks)
+ ),
- TP_ARGS(sb),
+ TP_fast_assign(
+ int i;
- TP_STRUCT__entry(
- __field(dev_t, dev)
- __field(struct ext4_sb_info *, sbi)
- __field(int, count)
- ),
-
- TP_fast_assign(
- __entry->dev = sb->s_dev;
- __entry->sbi = EXT4_SB(sb);
- ),
-
- TP_printk("dev %d:%d fc ineligible reasons:\n"
- "%s:%d, %s:%d, %s:%d, %s:%d, %s:%d, %s:%d, %s:%d, %s:%d, %s:%d; "
- "num_commits:%ld, ineligible: %ld, numblks: %ld",
- MAJOR(__entry->dev), MINOR(__entry->dev),
- FC_REASON_NAME_STAT(EXT4_FC_REASON_XATTR),
- FC_REASON_NAME_STAT(EXT4_FC_REASON_CROSS_RENAME),
- FC_REASON_NAME_STAT(EXT4_FC_REASON_JOURNAL_FLAG_CHANGE),
- FC_REASON_NAME_STAT(EXT4_FC_REASON_NOMEM),
- FC_REASON_NAME_STAT(EXT4_FC_REASON_SWAP_BOOT),
- FC_REASON_NAME_STAT(EXT4_FC_REASON_RESIZE),
- FC_REASON_NAME_STAT(EXT4_FC_REASON_RENAME_DIR),
- FC_REASON_NAME_STAT(EXT4_FC_REASON_FALLOC_RANGE),
- FC_REASON_NAME_STAT(EXT4_FC_REASON_INODE_JOURNAL_DATA),
- __entry->sbi->s_fc_stats.fc_num_commits,
- __entry->sbi->s_fc_stats.fc_ineligible_commits,
- __entry->sbi->s_fc_stats.fc_numblks)
+ __entry->dev = sb->s_dev;
+ for (i = 0; i < EXT4_FC_REASON_MAX; i++) {
+ __entry->fc_ineligible_rc[i] =
+ EXT4_SB(sb)->s_fc_stats.fc_ineligible_reason_count[i];
+ }
+ __entry->fc_commits = EXT4_SB(sb)->s_fc_stats.fc_num_commits;
+ __entry->fc_ineligible_commits =
+ EXT4_SB(sb)->s_fc_stats.fc_ineligible_commits;
+ __entry->fc_numblks = EXT4_SB(sb)->s_fc_stats.fc_numblks;
+ ),
+ TP_printk("dev %d,%d fc ineligible reasons:\n"
+ "%s:%u, %s:%u, %s:%u, %s:%u, %s:%u, %s:%u, %s:%u, %s:%u, %s:%u "
+ "num_commits:%lu, ineligible: %lu, numblks: %lu",
+ MAJOR(__entry->dev), MINOR(__entry->dev),
+ FC_REASON_NAME_STAT(EXT4_FC_REASON_XATTR),
+ FC_REASON_NAME_STAT(EXT4_FC_REASON_CROSS_RENAME),
+ FC_REASON_NAME_STAT(EXT4_FC_REASON_JOURNAL_FLAG_CHANGE),
+ FC_REASON_NAME_STAT(EXT4_FC_REASON_NOMEM),
+ FC_REASON_NAME_STAT(EXT4_FC_REASON_SWAP_BOOT),
+ FC_REASON_NAME_STAT(EXT4_FC_REASON_RESIZE),
+ FC_REASON_NAME_STAT(EXT4_FC_REASON_RENAME_DIR),
+ FC_REASON_NAME_STAT(EXT4_FC_REASON_FALLOC_RANGE),
+ FC_REASON_NAME_STAT(EXT4_FC_REASON_INODE_JOURNAL_DATA),
+ __entry->fc_commits, __entry->fc_ineligible_commits,
+ __entry->fc_numblks)
);
#define DEFINE_TRACE_DENTRY_EVENT(__type) \
From: Zhihao Cheng <[email protected]>
commit 40a8f0d5e7b3999f096570edab71c345da812e3e upstream.
'whiteout_ui->data' will be freed twice if space budget fail for
rename whiteout operation as following process:
rename_whiteout
dev = kmalloc
whiteout_ui->data = dev
kfree(whiteout_ui->data) // Free first time
iput(whiteout)
ubifs_free_inode
kfree(ui->data) // Double free!
KASAN reports:
==================================================================
BUG: KASAN: double-free or invalid-free in ubifs_free_inode+0x4f/0x70
Call Trace:
kfree+0x117/0x490
ubifs_free_inode+0x4f/0x70 [ubifs]
i_callback+0x30/0x60
rcu_do_batch+0x366/0xac0
__do_softirq+0x133/0x57f
Allocated by task 1506:
kmem_cache_alloc_trace+0x3c2/0x7a0
do_rename+0x9b7/0x1150 [ubifs]
ubifs_rename+0x106/0x1f0 [ubifs]
do_syscall_64+0x35/0x80
Freed by task 1506:
kfree+0x117/0x490
do_rename.cold+0x53/0x8a [ubifs]
ubifs_rename+0x106/0x1f0 [ubifs]
do_syscall_64+0x35/0x80
The buggy address belongs to the object at ffff88810238bed8 which
belongs to the cache kmalloc-8 of size 8
==================================================================
Let ubifs_free_inode() free 'whiteout_ui->data'. BTW, delete unused
assignment 'whiteout_ui->data_len = 0', process 'ubifs_evict_inode()
-> ubifs_jnl_delete_inode() -> ubifs_jnl_write_inode()' doesn't need it
(because 'inc_nlink(whiteout)' won't be excuted by 'goto out_release',
and the nlink of whiteout inode is 0).
Fixes: 9e0a1fff8db56ea ("ubifs: Implement RENAME_WHITEOUT")
Signed-off-by: Zhihao Cheng <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ubifs/dir.c | 2 --
1 file changed, 2 deletions(-)
--- a/fs/ubifs/dir.c
+++ b/fs/ubifs/dir.c
@@ -1423,8 +1423,6 @@ static int do_rename(struct inode *old_d
err = ubifs_budget_space(c, &wht_req);
if (err) {
- kfree(whiteout_ui->data);
- whiteout_ui->data_len = 0;
iput(whiteout);
goto out_release;
}
From: Rafael J. Wysocki <[email protected]>
[ Upstream commit 0c9992315e738e7d6e927ef36839a466b080dba6 ]
ACPICA commit b1c3656ef4950098e530be68d4b589584f06cddc
Prevent acpi_ns_walk_namespace() from crashing when called with
start_node equal to ACPI_ROOT_OBJECT if the Namespace has not been
instantiated yet and acpi_gbl_root_node is NULL.
For instance, this can happen if the kernel is run with "acpi=off"
in the command line.
Link: https://github.com/acpica/acpica/commit/b1c3656ef4950098e530be68d4b589584f06cddc
Link: https://lore.kernel.org/linux-acpi/CAJZ5v0hJWW_vZ3wwajE7xT38aWjY7cZyvqMJpXHzUL98-SiCVQ@mail.gmail.com/
Reported-by: Hans de Goede <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/acpi/acpica/nswalk.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/acpi/acpica/nswalk.c b/drivers/acpi/acpica/nswalk.c
index b7f3e8603ad8..901fa5ca284d 100644
--- a/drivers/acpi/acpica/nswalk.c
+++ b/drivers/acpi/acpica/nswalk.c
@@ -169,6 +169,9 @@ acpi_ns_walk_namespace(acpi_object_type type,
if (start_node == ACPI_ROOT_OBJECT) {
start_node = acpi_gbl_root_node;
+ if (!start_node) {
+ return_ACPI_STATUS(AE_NO_NAMESPACE);
+ }
}
/* Null child means "get first node" */
--
2.34.1
From: Daniel Thompson <[email protected]>
[ Upstream commit c1cb81429df462eca1b6ba615cddd21dd3103c46 ]
Currently kdb_putarea_size() uses copy_from_kernel_nofault() to write *to*
arbitrary kernel memory. This is obviously wrong and means the memory
modify ('mm') command is a serious risk to debugger stability: if we poke
to a bad address we'll double-fault and lose our debug session.
Fix this the (very) obvious way.
Note that there are two Fixes: tags because the API was renamed and this
patch will only trivially backport as far as the rename (and this is
probably enough). Nevertheless Christoph's rename did not introduce this
problem so I wanted to record that!
Fixes: fe557319aa06 ("maccess: rename probe_kernel_{read,write} to copy_{from,to}_kernel_nofault")
Fixes: 5d5314d6795f ("kdb: core for kgdb back end (1 of 2)")
Signed-off-by: Daniel Thompson <[email protected]>
Reviewed-by: Douglas Anderson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/debug/kdb/kdb_support.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/kernel/debug/kdb/kdb_support.c b/kernel/debug/kdb/kdb_support.c
index 6226502ce049..13417f0045f0 100644
--- a/kernel/debug/kdb/kdb_support.c
+++ b/kernel/debug/kdb/kdb_support.c
@@ -350,7 +350,7 @@ int kdb_getarea_size(void *res, unsigned long addr, size_t size)
*/
int kdb_putarea_size(unsigned long addr, void *res, size_t size)
{
- int ret = copy_from_kernel_nofault((char *)addr, (char *)res, size);
+ int ret = copy_to_kernel_nofault((char *)addr, (char *)res, size);
if (ret) {
if (!KDB_STATE(SUPPRESS)) {
kdb_printf("kdb_putarea: Bad address 0x%lx\n", addr);
--
2.34.1
From: Liam Beguin <[email protected]>
commit 1bca97ff95c732a516ebb68da72814194980e0a5 upstream.
When a consumer calls iio_read_channel_processed() and the channel has
an integer scale, the scale channel scale is applied and the processed
value is returned as expected.
On the other hand, if the consumer calls iio_convert_raw_to_processed()
the scaling factor requested by the consumer is not applied.
This for example causes the consumer to process mV when expecting uV.
Make sure to always apply the scaling factor requested by the consumer.
Fixes: 48e44ce0f881 ("iio:inkern: Add function to read the processed value")
Signed-off-by: Liam Beguin <[email protected]>
Reviewed-by: Peter Rosin <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/iio/inkern.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/iio/inkern.c
+++ b/drivers/iio/inkern.c
@@ -582,7 +582,7 @@ static int iio_convert_raw_to_processed_
switch (scale_type) {
case IIO_VAL_INT:
- *processed = raw64 * scale_val;
+ *processed = raw64 * scale_val * scale;
break;
case IIO_VAL_INT_PLUS_MICRO:
if (scale_val2 < 0)
From: Pavel Skripkin <[email protected]>
[ Upstream commit 2cc7cc01c15f57d056318c33705647f87dcd4aab ]
Syzbot reported divide error in dbNextAG(). The problem was in missing
validation check for malicious image.
Syzbot crafted an image with bmp->db_numag equal to 0. There wasn't any
validation checks, but dbNextAG() blindly use bmp->db_numag in divide
expression
Fix it by validating bmp->db_numag in dbMount() and return an error if
image is malicious
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-and-tested-by: [email protected]
Signed-off-by: Pavel Skripkin <[email protected]>
Signed-off-by: Dave Kleikamp <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/jfs/jfs_dmap.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/fs/jfs/jfs_dmap.c b/fs/jfs/jfs_dmap.c
index aedad59f8a45..e58ae29a223d 100644
--- a/fs/jfs/jfs_dmap.c
+++ b/fs/jfs/jfs_dmap.c
@@ -148,6 +148,7 @@ static const s8 budtab[256] = {
* 0 - success
* -ENOMEM - insufficient memory
* -EIO - i/o error
+ * -EINVAL - wrong bmap data
*/
int dbMount(struct inode *ipbmap)
{
@@ -179,6 +180,12 @@ int dbMount(struct inode *ipbmap)
bmp->db_nfree = le64_to_cpu(dbmp_le->dn_nfree);
bmp->db_l2nbperpage = le32_to_cpu(dbmp_le->dn_l2nbperpage);
bmp->db_numag = le32_to_cpu(dbmp_le->dn_numag);
+ if (!bmp->db_numag) {
+ release_metapage(mp);
+ kfree(bmp);
+ return -EINVAL;
+ }
+
bmp->db_maxlevel = le32_to_cpu(dbmp_le->dn_maxlevel);
bmp->db_maxag = le32_to_cpu(dbmp_le->dn_maxag);
bmp->db_agpref = le32_to_cpu(dbmp_le->dn_agpref);
--
2.34.1
From: Takashi Sakamoto <[email protected]>
[ Upstream commit bf0cd60b7e33cf221fbe1114e4acb2c828b0af0d ]
AV/C deferred transaction was supported at a commit 00a7bb81c20f ("ALSA:
firewire-lib: Add support for deferred transaction") while 'deferrable'
flag can be uninitialized for non-control/notify AV/C transactions.
UBSAN reports it:
kernel: ================================================================================
kernel: UBSAN: invalid-load in /build/linux-aa0B4d/linux-5.15.0/sound/firewire/fcp.c:363:9
kernel: load of value 158 is not a valid value for type '_Bool'
kernel: CPU: 3 PID: 182227 Comm: irq/35-firewire Tainted: P OE 5.15.0-18-generic #18-Ubuntu
kernel: Hardware name: Gigabyte Technology Co., Ltd. AX370-Gaming 5/AX370-Gaming 5, BIOS F42b 08/01/2019
kernel: Call Trace:
kernel: <IRQ>
kernel: show_stack+0x52/0x58
kernel: dump_stack_lvl+0x4a/0x5f
kernel: dump_stack+0x10/0x12
kernel: ubsan_epilogue+0x9/0x45
kernel: __ubsan_handle_load_invalid_value.cold+0x44/0x49
kernel: fcp_response.part.0.cold+0x1a/0x2b [snd_firewire_lib]
kernel: fcp_response+0x28/0x30 [snd_firewire_lib]
kernel: fw_core_handle_request+0x230/0x3d0 [firewire_core]
kernel: handle_ar_packet+0x1d9/0x200 [firewire_ohci]
kernel: ? handle_ar_packet+0x1d9/0x200 [firewire_ohci]
kernel: ? transmit_complete_callback+0x9f/0x120 [firewire_core]
kernel: ar_context_tasklet+0xa8/0x2e0 [firewire_ohci]
kernel: tasklet_action_common.constprop.0+0xea/0xf0
kernel: tasklet_action+0x22/0x30
kernel: __do_softirq+0xd9/0x2e3
kernel: ? irq_finalize_oneshot.part.0+0xf0/0xf0
kernel: do_softirq+0x75/0xa0
kernel: </IRQ>
kernel: <TASK>
kernel: __local_bh_enable_ip+0x50/0x60
kernel: irq_forced_thread_fn+0x7e/0x90
kernel: irq_thread+0xba/0x190
kernel: ? irq_thread_fn+0x60/0x60
kernel: kthread+0x11e/0x140
kernel: ? irq_thread_check_affinity+0xf0/0xf0
kernel: ? set_kthread_struct+0x50/0x50
kernel: ret_from_fork+0x22/0x30
kernel: </TASK>
kernel: ================================================================================
This commit fixes the bug. The bug has no disadvantage for the non-
control/notify AV/C transactions since the flag has an effect for AV/C
response with INTERIM (0x0f) status which is not used for the transactions
in AV/C general specification.
Fixes: 00a7bb81c20f ("ALSA: firewire-lib: Add support for deferred transaction")
Signed-off-by: Takashi Sakamoto <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/firewire/fcp.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/sound/firewire/fcp.c b/sound/firewire/fcp.c
index bbfbebf4affb..df44dd5dc4b2 100644
--- a/sound/firewire/fcp.c
+++ b/sound/firewire/fcp.c
@@ -240,9 +240,7 @@ int fcp_avc_transaction(struct fw_unit *unit,
t.response_match_bytes = response_match_bytes;
t.state = STATE_PENDING;
init_waitqueue_head(&t.wait);
-
- if (*(const u8 *)command == 0x00 || *(const u8 *)command == 0x03)
- t.deferrable = true;
+ t.deferrable = (*(const u8 *)command == 0x00 || *(const u8 *)command == 0x03);
spin_lock_irq(&transactions_lock);
list_add_tail(&t.list, &transactions);
--
2.34.1
From: Muhammad Usama Anjum <[email protected]>
[ Upstream commit b06e15ebd5bfb670f93c7f11a29b8299c1178bc6 ]
Add check to test if CC has a string. CC can have multiple sub-strings
like "ccache gcc". Erorr pops up if it is treated as single string and
double quotes are used around it. This can be fixed by removing the
quotes and not treating CC as a single string.
Fixes: e9886ace222e ("selftests, x86: Rework x86 target architecture detection")
Reported-by: "kernelci.org bot" <[email protected]>
Signed-off-by: Muhammad Usama Anjum <[email protected]>
Signed-off-by: Dave Hansen <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/x86/check_cc.sh | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/testing/selftests/x86/check_cc.sh b/tools/testing/selftests/x86/check_cc.sh
index 3e2089c8cf54..8c669c0d662e 100755
--- a/tools/testing/selftests/x86/check_cc.sh
+++ b/tools/testing/selftests/x86/check_cc.sh
@@ -7,7 +7,7 @@ CC="$1"
TESTPROG="$2"
shift 2
-if "$CC" -o /dev/null "$TESTPROG" -O0 "$@" 2>/dev/null; then
+if [ -n "$CC" ] && $CC -o /dev/null "$TESTPROG" -O0 "$@" 2>/dev/null; then
echo 1
else
echo 0
--
2.34.1
From: Paul Menzel <[email protected]>
[ Upstream commit 633174a7046ec3b4572bec24ef98e6ee89bce14b ]
Buidling raid6test on Ubuntu 21.10 (ppc64le) with GNU Make 4.3 shows the
errors below:
$ cd lib/raid6/test/
$ make
<stdin>:1:1: error: stray ‘\’ in program
<stdin>:1:2: error: stray ‘#’ in program
<stdin>:1:11: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ \
before ‘<’ token
[...]
The errors come from the HAS_ALTIVEC test, which fails, and the POWER
optimized versions are not built. That’s also reason nobody noticed on the
other architectures.
GNU Make 4.3 does not remove the backslash anymore. From the 4.3 release
announcment:
> * WARNING: Backward-incompatibility!
> Number signs (#) appearing inside a macro reference or function invocation
> no longer introduce comments and should not be escaped with backslashes:
> thus a call such as:
> foo := $(shell echo '#')
> is legal. Previously the number sign needed to be escaped, for example:
> foo := $(shell echo '\#')
> Now this latter will resolve to "\#". If you want to write makefiles
> portable to both versions, assign the number sign to a variable:
> H := \#
> foo := $(shell echo '$H')
> This was claimed to be fixed in 3.81, but wasn't, for some reason.
> To detect this change search for 'nocomment' in the .FEATURES variable.
So, do the same as commit 9564a8cf422d ("Kbuild: fix # escaping in .cmd
files for future Make") and commit 929bef467771 ("bpf: Use $(pound) instead
of \# in Makefiles") and define and use a $(pound) variable.
Reference for the change in make:
https://git.savannah.gnu.org/cgit/make.git/commit/?id=c6966b323811c37acedff05b57
Cc: Matt Brown <[email protected]>
Signed-off-by: Paul Menzel <[email protected]>
Signed-off-by: Song Liu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
lib/raid6/test/Makefile | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/lib/raid6/test/Makefile b/lib/raid6/test/Makefile
index a4c7cd74cff5..4fb7700a741b 100644
--- a/lib/raid6/test/Makefile
+++ b/lib/raid6/test/Makefile
@@ -4,6 +4,8 @@
# from userspace.
#
+pound := \#
+
CC = gcc
OPTFLAGS = -O2 # Adjust as desired
CFLAGS = -I.. -I ../../../include -g $(OPTFLAGS)
@@ -42,7 +44,7 @@ else ifeq ($(HAS_NEON),yes)
OBJS += neon.o neon1.o neon2.o neon4.o neon8.o recov_neon.o recov_neon_inner.o
CFLAGS += -DCONFIG_KERNEL_MODE_NEON=1
else
- HAS_ALTIVEC := $(shell printf '\#include <altivec.h>\nvector int a;\n' |\
+ HAS_ALTIVEC := $(shell printf '$(pound)include <altivec.h>\nvector int a;\n' |\
gcc -c -x c - >/dev/null && rm ./-.o && echo yes)
ifeq ($(HAS_ALTIVEC),yes)
CFLAGS += -I../../../arch/powerpc/include
--
2.34.1
From: Jonathan Neuschäfer <[email protected]>
commit 9d0f18bca3b557ae5d2128661ac06d33b3f45c0a upstream.
When compile-testing on 64-bit architectures, GCC complains about the
mismatch of types between the %d format specifier and value returned by
ARRAY_LENGTH(). Use %zu, which is correct everywhere.
Reported-by: kernel test robot <[email protected]>
Fixes: 3b588e43ee5c7 ("pinctrl: nuvoton: add NPCM7xx pinctrl and GPIO driver")
Signed-off-by: Jonathan Neuschäfer <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pinctrl/nuvoton/pinctrl-npcm7xx.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/pinctrl/nuvoton/pinctrl-npcm7xx.c
+++ b/drivers/pinctrl/nuvoton/pinctrl-npcm7xx.c
@@ -1560,7 +1560,7 @@ static int npcm7xx_get_groups_count(stru
{
struct npcm7xx_pinctrl *npcm = pinctrl_dev_get_drvdata(pctldev);
- dev_dbg(npcm->dev, "group size: %d\n", ARRAY_SIZE(npcm7xx_groups));
+ dev_dbg(npcm->dev, "group size: %zu\n", ARRAY_SIZE(npcm7xx_groups));
return ARRAY_SIZE(npcm7xx_groups);
}
From: Codrin Ciubotariu <[email protected]>
[ Upstream commit 1a944729d8635fa59638f24e8727d5ccaa0c8c19 ]
Audio PLL can be used as parent by the GCLKs of PDMCs.
Fixes: cb783bbbcf54 ("clk: at91: sama7g5: add clock support for sama7g5")
Signed-off-by: Codrin Ciubotariu <[email protected]>
Reviewed-by: Claudiu Beznea <[email protected]>
Signed-off-by: Nicolas Ferre <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/at91/sama7g5.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/clk/at91/sama7g5.c b/drivers/clk/at91/sama7g5.c
index a092a940baa4..9d25b23fb99d 100644
--- a/drivers/clk/at91/sama7g5.c
+++ b/drivers/clk/at91/sama7g5.c
@@ -606,16 +606,16 @@ static const struct {
{ .n = "pdmc0_gclk",
.id = 68,
.r = { .max = 50000000 },
- .pp = { "syspll_divpmcck", "baudpll_divpmcck", },
- .pp_mux_table = { 5, 8, },
+ .pp = { "syspll_divpmcck", "audiopll_divpmcck", },
+ .pp_mux_table = { 5, 9, },
.pp_count = 2,
.pp_chg_id = INT_MIN, },
{ .n = "pdmc1_gclk",
.id = 69,
.r = { .max = 50000000, },
- .pp = { "syspll_divpmcck", "baudpll_divpmcck", },
- .pp_mux_table = { 5, 8, },
+ .pp = { "syspll_divpmcck", "audiopll_divpmcck", },
+ .pp_mux_table = { 5, 9, },
.pp_count = 2,
.pp_chg_id = INT_MIN, },
--
2.34.1
From: Jann Horn <[email protected]>
commit ee1fee900537b5d9560e9f937402de5ddc8412f3 upstream.
Setting PTRACE_O_SUSPEND_SECCOMP is supposed to be a highly privileged
operation because it allows the tracee to completely bypass all seccomp
filters on kernels with CONFIG_CHECKPOINT_RESTORE=y. It is only supposed to
be settable by a process with global CAP_SYS_ADMIN, and only if that
process is not subject to any seccomp filters at all.
However, while these permission checks were done on the PTRACE_SETOPTIONS
path, they were missing on the PTRACE_SEIZE path, which also sets
user-specified ptrace flags.
Move the permissions checks out into a helper function and let both
ptrace_attach() and ptrace_setoptions() call it.
Cc: [email protected]
Fixes: 13c4a90119d2 ("seccomp: add ptrace options for suspend/resume")
Signed-off-by: Jann Horn <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Eric W. Biederman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/ptrace.c | 47 ++++++++++++++++++++++++++++++++---------------
1 file changed, 32 insertions(+), 15 deletions(-)
--- a/kernel/ptrace.c
+++ b/kernel/ptrace.c
@@ -370,6 +370,26 @@ bool ptrace_may_access(struct task_struc
return !err;
}
+static int check_ptrace_options(unsigned long data)
+{
+ if (data & ~(unsigned long)PTRACE_O_MASK)
+ return -EINVAL;
+
+ if (unlikely(data & PTRACE_O_SUSPEND_SECCOMP)) {
+ if (!IS_ENABLED(CONFIG_CHECKPOINT_RESTORE) ||
+ !IS_ENABLED(CONFIG_SECCOMP))
+ return -EINVAL;
+
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+
+ if (seccomp_mode(¤t->seccomp) != SECCOMP_MODE_DISABLED ||
+ current->ptrace & PT_SUSPEND_SECCOMP)
+ return -EPERM;
+ }
+ return 0;
+}
+
static int ptrace_attach(struct task_struct *task, long request,
unsigned long addr,
unsigned long flags)
@@ -381,8 +401,16 @@ static int ptrace_attach(struct task_str
if (seize) {
if (addr != 0)
goto out;
+ /*
+ * This duplicates the check in check_ptrace_options() because
+ * ptrace_attach() and ptrace_setoptions() have historically
+ * used different error codes for unknown ptrace options.
+ */
if (flags & ~(unsigned long)PTRACE_O_MASK)
goto out;
+ retval = check_ptrace_options(flags);
+ if (retval)
+ return retval;
flags = PT_PTRACED | PT_SEIZED | (flags << PT_OPT_FLAG_SHIFT);
} else {
flags = PT_PTRACED;
@@ -655,22 +683,11 @@ int ptrace_writedata(struct task_struct
static int ptrace_setoptions(struct task_struct *child, unsigned long data)
{
unsigned flags;
+ int ret;
- if (data & ~(unsigned long)PTRACE_O_MASK)
- return -EINVAL;
-
- if (unlikely(data & PTRACE_O_SUSPEND_SECCOMP)) {
- if (!IS_ENABLED(CONFIG_CHECKPOINT_RESTORE) ||
- !IS_ENABLED(CONFIG_SECCOMP))
- return -EINVAL;
-
- if (!capable(CAP_SYS_ADMIN))
- return -EPERM;
-
- if (seccomp_mode(¤t->seccomp) != SECCOMP_MODE_DISABLED ||
- current->ptrace & PT_SUSPEND_SECCOMP)
- return -EPERM;
- }
+ ret = check_ptrace_options(data);
+ if (ret)
+ return ret;
/* Avoid intermediate state when all opts are cleared */
flags = child->ptrace;
From: Tomas Paukrt <[email protected]>
[ Upstream commit 28e9b6d8199a3f124682b143800c2dacdc3d70dd ]
This patch fixes a bug in scatterlist processing that may cause incorrect AES block encryption/decryption.
Fixes: 2e6d793e1bf0 ("crypto: mxs-dcp - Use sg_mapping_iter to copy data")
Signed-off-by: Tomas Paukrt <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/crypto/mxs-dcp.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/crypto/mxs-dcp.c b/drivers/crypto/mxs-dcp.c
index 5edc91cdb4e6..a9d3e675f7ff 100644
--- a/drivers/crypto/mxs-dcp.c
+++ b/drivers/crypto/mxs-dcp.c
@@ -330,7 +330,7 @@ static int mxs_dcp_aes_block_crypt(struct crypto_async_request *arq)
memset(key + AES_KEYSIZE_128, 0, AES_KEYSIZE_128);
}
- for_each_sg(req->src, src, sg_nents(src), i) {
+ for_each_sg(req->src, src, sg_nents(req->src), i) {
src_buf = sg_virt(src);
len = sg_dma_len(src);
tlen += len;
--
2.34.1
From: Guillaume Ranquet <[email protected]>
[ Upstream commit 4467b8bad2401794fb89a0268c8c8257180bf60f ]
of_base->base can either be iomapped using of_io_request_and_map() or
of_iomap() depending whether or not an of_base->name has been set.
Thus check of_base->base against NULL as of_iomap() does not return a
PTR_ERR() in case of error.
Fixes: 9aea417afa6b ("clocksource/drivers/timer-of: Don't request the resource by name")
Signed-off-by: Guillaume Ranquet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Daniel Lezcano <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clocksource/timer-of.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/clocksource/timer-of.c b/drivers/clocksource/timer-of.c
index 572da477c6d3..b965f20174e3 100644
--- a/drivers/clocksource/timer-of.c
+++ b/drivers/clocksource/timer-of.c
@@ -157,9 +157,9 @@ static __init int timer_of_base_init(struct device_node *np,
of_base->base = of_base->name ?
of_io_request_and_map(np, of_base->index, of_base->name) :
of_iomap(np, of_base->index);
- if (IS_ERR(of_base->base)) {
- pr_err("Failed to iomap (%s)\n", of_base->name);
- return PTR_ERR(of_base->base);
+ if (IS_ERR_OR_NULL(of_base->base)) {
+ pr_err("Failed to iomap (%s:%s)\n", np->name, of_base->name);
+ return of_base->base ? PTR_ERR(of_base->base) : -ENOMEM;
}
return 0;
--
2.34.1
From: Randy Dunlap <[email protected]>
[ Upstream commit b665eae7a788c5e2bc10f9ac3c0137aa0ad1fc97 ]
If an invalid option value is used with "printk.devkmsg=<value>",
it is silently ignored.
If a valid option value is used, it is honored but the wrong return
value (0) is used, indicating that the command line option had an
error and was not handled. This string is not added to init's
environment strings due to init/main.c::unknown_bootoption()
checking for a '.' in the boot option string and then considering
that string to be an "Unused module parameter".
Print a warning message if a bad option string is used.
Always return 1 from the __setup handler to indicate that the command
line option has been handled.
Fixes: 750afe7babd1 ("printk: add kernel parameter to control writes to /dev/kmsg")
Signed-off-by: Randy Dunlap <[email protected]>
Reported-by: Igor Zhbanov <[email protected]>
Link: lore.kernel.org/r/[email protected]
Cc: Borislav Petkov <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Petr Mladek <[email protected]>
Cc: Sergey Senozhatsky <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: John Ogness <[email protected]>
Reviewed-by: John Ogness <[email protected]>
Reviewed-by: Sergey Senozhatsky <[email protected]>
Reviewed-by: Petr Mladek <[email protected]>
Signed-off-by: Petr Mladek <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/printk/printk.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/kernel/printk/printk.c b/kernel/printk/printk.c
index 85351a12c85d..17a310dcb6d9 100644
--- a/kernel/printk/printk.c
+++ b/kernel/printk/printk.c
@@ -146,8 +146,10 @@ static int __control_devkmsg(char *str)
static int __init control_devkmsg(char *str)
{
- if (__control_devkmsg(str) < 0)
+ if (__control_devkmsg(str) < 0) {
+ pr_warn("printk.devkmsg: bad option string '%s'\n", str);
return 1;
+ }
/*
* Set sysctl string accordingly:
@@ -166,7 +168,7 @@ static int __init control_devkmsg(char *str)
*/
devkmsg_log |= DEVKMSG_LOG_MASK_LOCK;
- return 0;
+ return 1;
}
__setup("printk.devkmsg=", control_devkmsg);
--
2.34.1
From: Matthew Wilcox (Oracle) <[email protected]>
commit 3ed4bb77156da0bc732847c8c9df92454c1fbeea upstream.
When splitting a value entry, we may need to add the new nodes to the LRU
list and remove the parent node from the LRU list. The WARN_ON checks
in shadow_lru_isolate() catch this oversight. This bug was latent
until we stopped splitting folios in shrink_page_list() with commit
820c4e2e6f51 ("mm/vmscan: Free non-shmem folios without splitting them").
That allows the creation of large shadow entries, and subsequently when
trying to page in a small page, we will split the large shadow entry
in __filemap_add_folio().
Fixes: 8fc75643c5e1 ("XArray: add xas_split")
Reported-by: Hugh Dickins <[email protected]>
Signed-off-by: Matthew Wilcox (Oracle) <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
lib/xarray.c | 2 ++
1 file changed, 2 insertions(+)
--- a/lib/xarray.c
+++ b/lib/xarray.c
@@ -1080,6 +1080,7 @@ void xas_split(struct xa_state *xas, voi
xa_mk_node(child));
if (xa_is_value(curr))
values--;
+ xas_update(xas, child);
} else {
unsigned int canon = offset - xas->xa_sibs;
@@ -1094,6 +1095,7 @@ void xas_split(struct xa_state *xas, voi
} while (offset-- > xas->xa_offset);
node->nr_values += values;
+ xas_update(xas, node);
}
EXPORT_SYMBOL_GPL(xas_split);
#endif
From: Krzysztof Kozlowski <[email protected]>
commit 50ebd19e3585b9792e994cfa8cbee8947fe06371 upstream.
The driver iterates over its devicetree children with
for_each_child_of_node() and stores for later found node pointer. This
has to be put in error paths to avoid leak during re-probing.
Fixes: ab663789d697 ("pinctrl: samsung: Match pin banks with their device nodes")
Cc: <[email protected]>
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Sam Protsenko <[email protected]>
Reviewed-by: Chanho Park <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pinctrl/samsung/pinctrl-samsung.c | 30 +++++++++++++++++++++++-------
1 file changed, 23 insertions(+), 7 deletions(-)
--- a/drivers/pinctrl/samsung/pinctrl-samsung.c
+++ b/drivers/pinctrl/samsung/pinctrl-samsung.c
@@ -1002,6 +1002,16 @@ samsung_pinctrl_get_soc_data_for_of_alia
return &(of_data->ctrl[id]);
}
+static void samsung_banks_of_node_put(struct samsung_pinctrl_drv_data *d)
+{
+ struct samsung_pin_bank *bank;
+ unsigned int i;
+
+ bank = d->pin_banks;
+ for (i = 0; i < d->nr_banks; ++i, ++bank)
+ of_node_put(bank->of_node);
+}
+
/* retrieve the soc specific data */
static const struct samsung_pin_ctrl *
samsung_pinctrl_get_soc_data(struct samsung_pinctrl_drv_data *d,
@@ -1116,19 +1126,19 @@ static int samsung_pinctrl_probe(struct
if (ctrl->retention_data) {
drvdata->retention_ctrl = ctrl->retention_data->init(drvdata,
ctrl->retention_data);
- if (IS_ERR(drvdata->retention_ctrl))
- return PTR_ERR(drvdata->retention_ctrl);
+ if (IS_ERR(drvdata->retention_ctrl)) {
+ ret = PTR_ERR(drvdata->retention_ctrl);
+ goto err_put_banks;
+ }
}
ret = samsung_pinctrl_register(pdev, drvdata);
if (ret)
- return ret;
+ goto err_put_banks;
ret = samsung_gpiolib_register(pdev, drvdata);
- if (ret) {
- samsung_pinctrl_unregister(pdev, drvdata);
- return ret;
- }
+ if (ret)
+ goto err_unregister;
if (ctrl->eint_gpio_init)
ctrl->eint_gpio_init(drvdata);
@@ -1138,6 +1148,12 @@ static int samsung_pinctrl_probe(struct
platform_set_drvdata(pdev, drvdata);
return 0;
+
+err_unregister:
+ samsung_pinctrl_unregister(pdev, drvdata);
+err_put_banks:
+ samsung_banks_of_node_put(drvdata);
+ return ret;
}
/*
From: Damien Le Moal <[email protected]>
[ Upstream commit ca374f5d92b8ae778f6a37dd3e7ed809bbf7a953 ]
All fields of the SASProtocolTimerConfig structure have the __le32 type.
As such, use cpu_to_le32() to initialize them. This change suppresses many
sparse warnings:
warning: incorrect type in assignment (different base types)
expected restricted __le32 [addressable] [usertype] pageCode
got int
Note that the check to limit the value of the STP_IDLE_TMO field is removed
as this field is initialized using the fixed (and small) value defined by
the STP_IDLE_TIME macro.
The pm8001_dbg() calls printing the values of the SASProtocolTimerConfig
structure fileds are changed to use le32_to_cpu() to present the values in
human readable form.
Link: https://lore.kernel.org/r/[email protected]
Fixes: a6cb3d012b98 ("[SCSI] pm80xx: thermal, sas controller config and error handling update")
Reviewed-by: Jack Wang <[email protected]>
Signed-off-by: Damien Le Moal <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/pm8001/pm80xx_hwi.c | 52 +++++++++++++++-----------------
1 file changed, 25 insertions(+), 27 deletions(-)
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c
index 1b1033b4e310..f9736e02010d 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.c
+++ b/drivers/scsi/pm8001/pm80xx_hwi.c
@@ -1243,43 +1243,41 @@ pm80xx_set_sas_protocol_timer_config(struct pm8001_hba_info *pm8001_ha)
circularQ = &pm8001_ha->inbnd_q_tbl[0];
payload.tag = cpu_to_le32(tag);
- SASConfigPage.pageCode = SAS_PROTOCOL_TIMER_CONFIG_PAGE;
- SASConfigPage.MST_MSI = 3 << 15;
- SASConfigPage.STP_SSP_MCT_TMO = (STP_MCT_TMO << 16) | SSP_MCT_TMO;
- SASConfigPage.STP_FRM_TMO = (SAS_MAX_OPEN_TIME << 24) |
- (SMP_MAX_CONN_TIMER << 16) | STP_FRM_TIMER;
- SASConfigPage.STP_IDLE_TMO = STP_IDLE_TIME;
-
- if (SASConfigPage.STP_IDLE_TMO > 0x3FFFFFF)
- SASConfigPage.STP_IDLE_TMO = 0x3FFFFFF;
-
-
- SASConfigPage.OPNRJT_RTRY_INTVL = (SAS_MFD << 16) |
- SAS_OPNRJT_RTRY_INTVL;
- SASConfigPage.Data_Cmd_OPNRJT_RTRY_TMO = (SAS_DOPNRJT_RTRY_TMO << 16)
- | SAS_COPNRJT_RTRY_TMO;
- SASConfigPage.Data_Cmd_OPNRJT_RTRY_THR = (SAS_DOPNRJT_RTRY_THR << 16)
- | SAS_COPNRJT_RTRY_THR;
- SASConfigPage.MAX_AIP = SAS_MAX_AIP;
+ SASConfigPage.pageCode = cpu_to_le32(SAS_PROTOCOL_TIMER_CONFIG_PAGE);
+ SASConfigPage.MST_MSI = cpu_to_le32(3 << 15);
+ SASConfigPage.STP_SSP_MCT_TMO =
+ cpu_to_le32((STP_MCT_TMO << 16) | SSP_MCT_TMO);
+ SASConfigPage.STP_FRM_TMO =
+ cpu_to_le32((SAS_MAX_OPEN_TIME << 24) |
+ (SMP_MAX_CONN_TIMER << 16) | STP_FRM_TIMER);
+ SASConfigPage.STP_IDLE_TMO = cpu_to_le32(STP_IDLE_TIME);
+
+ SASConfigPage.OPNRJT_RTRY_INTVL =
+ cpu_to_le32((SAS_MFD << 16) | SAS_OPNRJT_RTRY_INTVL);
+ SASConfigPage.Data_Cmd_OPNRJT_RTRY_TMO =
+ cpu_to_le32((SAS_DOPNRJT_RTRY_TMO << 16) | SAS_COPNRJT_RTRY_TMO);
+ SASConfigPage.Data_Cmd_OPNRJT_RTRY_THR =
+ cpu_to_le32((SAS_DOPNRJT_RTRY_THR << 16) | SAS_COPNRJT_RTRY_THR);
+ SASConfigPage.MAX_AIP = cpu_to_le32(SAS_MAX_AIP);
pm8001_dbg(pm8001_ha, INIT, "SASConfigPage.pageCode 0x%08x\n",
- SASConfigPage.pageCode);
+ le32_to_cpu(SASConfigPage.pageCode));
pm8001_dbg(pm8001_ha, INIT, "SASConfigPage.MST_MSI 0x%08x\n",
- SASConfigPage.MST_MSI);
+ le32_to_cpu(SASConfigPage.MST_MSI));
pm8001_dbg(pm8001_ha, INIT, "SASConfigPage.STP_SSP_MCT_TMO 0x%08x\n",
- SASConfigPage.STP_SSP_MCT_TMO);
+ le32_to_cpu(SASConfigPage.STP_SSP_MCT_TMO));
pm8001_dbg(pm8001_ha, INIT, "SASConfigPage.STP_FRM_TMO 0x%08x\n",
- SASConfigPage.STP_FRM_TMO);
+ le32_to_cpu(SASConfigPage.STP_FRM_TMO));
pm8001_dbg(pm8001_ha, INIT, "SASConfigPage.STP_IDLE_TMO 0x%08x\n",
- SASConfigPage.STP_IDLE_TMO);
+ le32_to_cpu(SASConfigPage.STP_IDLE_TMO));
pm8001_dbg(pm8001_ha, INIT, "SASConfigPage.OPNRJT_RTRY_INTVL 0x%08x\n",
- SASConfigPage.OPNRJT_RTRY_INTVL);
+ le32_to_cpu(SASConfigPage.OPNRJT_RTRY_INTVL));
pm8001_dbg(pm8001_ha, INIT, "SASConfigPage.Data_Cmd_OPNRJT_RTRY_TMO 0x%08x\n",
- SASConfigPage.Data_Cmd_OPNRJT_RTRY_TMO);
+ le32_to_cpu(SASConfigPage.Data_Cmd_OPNRJT_RTRY_TMO));
pm8001_dbg(pm8001_ha, INIT, "SASConfigPage.Data_Cmd_OPNRJT_RTRY_THR 0x%08x\n",
- SASConfigPage.Data_Cmd_OPNRJT_RTRY_THR);
+ le32_to_cpu(SASConfigPage.Data_Cmd_OPNRJT_RTRY_THR));
pm8001_dbg(pm8001_ha, INIT, "SASConfigPage.MAX_AIP 0x%08x\n",
- SASConfigPage.MAX_AIP);
+ le32_to_cpu(SASConfigPage.MAX_AIP));
memcpy(&payload.cfg_pg, &SASConfigPage,
sizeof(SASProtocolTimerConfig_t));
--
2.34.1
From: Niklas Söderlund <[email protected]>
[ Upstream commit 8fa42d78f6354bb96ad3a079dcbef528ca9fa9e0 ]
When running xdpsock for a fix duration of time before terminating
using --duration=<n>, there is a race condition that may cause xdpsock
to terminate immediately.
When running for a fixed duration of time the check to determine when to
terminate execution is in is_benchmark_done() and is being executed in
the context of the poller thread,
if (opt_duration > 0) {
unsigned long dt = (get_nsecs() - start_time);
if (dt >= opt_duration)
benchmark_done = true;
}
However start_time is only set after the poller thread have been
created. This leaves a small window when the poller thread is starting
and calls is_benchmark_done() for the first time that start_time is not
yet set. In that case start_time have its initial value of 0 and the
duration check fails as it do not correlate correctly for the
applications start time and immediately sets benchmark_done which in
turn terminates the xdpsock application.
Fix this by setting start_time before creating the poller thread.
Fixes: d3f11b018f6c ("samples/bpf: xdpsock: Add duration option to specify how long to run")
Signed-off-by: Niklas Söderlund <[email protected]>
Signed-off-by: Simon Horman <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
samples/bpf/xdpsock_user.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/samples/bpf/xdpsock_user.c b/samples/bpf/xdpsock_user.c
index 2e4508a6cb3a..cf5b0a895225 100644
--- a/samples/bpf/xdpsock_user.c
+++ b/samples/bpf/xdpsock_user.c
@@ -1520,14 +1520,15 @@ int main(int argc, char **argv)
setlocale(LC_ALL, "");
+ prev_time = get_nsecs();
+ start_time = prev_time;
+
if (!opt_quiet) {
ret = pthread_create(&pt, NULL, poller, NULL);
if (ret)
exit_with_error(ret);
}
- prev_time = get_nsecs();
- start_time = prev_time;
if (opt_bench == BENCH_RXDROP)
rx_drop_all();
--
2.34.1
From: Miaoqian Lin <[email protected]>
[ Upstream commit 96211b7c56b109a52768e6cc5e23a1f79316eca0 ]
If the probe fails, we should use pm_runtime_disable() to balance
pm_runtime_enable().
Add missing pm_runtime_disable() for __dw_mipi_dsi_probe.
Fixes: 46fc51546d44 ("drm/bridge/synopsys: Add MIPI DSI host controller bridge")
Signed-off-by: Miaoqian Lin <[email protected]>
Signed-off-by: Robert Foss <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Robert Foss <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
index 6b268f9445b3..376fa6eb46f6 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
@@ -1172,6 +1172,7 @@ __dw_mipi_dsi_probe(struct platform_device *pdev,
ret = mipi_dsi_host_register(&dsi->dsi_host);
if (ret) {
dev_err(dev, "Failed to register MIPI host: %d\n", ret);
+ pm_runtime_disable(dev);
dw_mipi_dsi_debugfs_remove(dsi);
return ERR_PTR(ret);
}
--
2.34.1
From: Ard Biesheuvel <[email protected]>
[ Upstream commit d11967870815b5ab89843980e35aab616c97c463 ]
Tweak the ftrace return paths to avoid redundant loads of SP, as well as
unnecessary clobbering of IP.
This also fixes the inconsistency of using MOV to perform a function
return, which is sub-optimal on recent micro-architectures but more
importantly, does not perform an interworking return, unlike compiler
generated function returns in Thumb2 builds.
Let's fix this by popping PC from the stack like most ordinary code
does.
Signed-off-by: Ard Biesheuvel <[email protected]>
Reviewed-by: Steven Rostedt (Google) <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/kernel/entry-ftrace.S | 51 +++++++++++++++-------------------
1 file changed, 22 insertions(+), 29 deletions(-)
diff --git a/arch/arm/kernel/entry-ftrace.S b/arch/arm/kernel/entry-ftrace.S
index f4886fb6e9ba..f33c171e3090 100644
--- a/arch/arm/kernel/entry-ftrace.S
+++ b/arch/arm/kernel/entry-ftrace.S
@@ -22,10 +22,7 @@
* mcount can be thought of as a function called in the middle of a subroutine
* call. As such, it needs to be transparent for both the caller and the
* callee: the original lr needs to be restored when leaving mcount, and no
- * registers should be clobbered. (In the __gnu_mcount_nc implementation, we
- * clobber the ip register. This is OK because the ARM calling convention
- * allows it to be clobbered in subroutines and doesn't use it to hold
- * parameters.)
+ * registers should be clobbered.
*
* When using dynamic ftrace, we patch out the mcount call by a "pop {lr}"
* instead of the __gnu_mcount_nc call (see arch/arm/kernel/ftrace.c).
@@ -70,26 +67,25 @@
.macro __ftrace_regs_caller
- sub sp, sp, #8 @ space for PC and CPSR OLD_R0,
+ str lr, [sp, #-8]! @ store LR as PC and make space for CPSR/OLD_R0,
@ OLD_R0 will overwrite previous LR
- add ip, sp, #12 @ move in IP the value of SP as it was
- @ before the push {lr} of the mcount mechanism
+ ldr lr, [sp, #8] @ get previous LR
- str lr, [sp, #0] @ store LR instead of PC
+ str r0, [sp, #8] @ write r0 as OLD_R0 over previous LR
- ldr lr, [sp, #8] @ get previous LR
+ str lr, [sp, #-4]! @ store previous LR as LR
- str r0, [sp, #8] @ write r0 as OLD_R0 over previous LR
+ add lr, sp, #16 @ move in LR the value of SP as it was
+ @ before the push {lr} of the mcount mechanism
- stmdb sp!, {ip, lr}
- stmdb sp!, {r0-r11, lr}
+ push {r0-r11, ip, lr}
@ stack content at this point:
@ 0 4 48 52 56 60 64 68 72
- @ R0 | R1 | ... | LR | SP + 4 | previous LR | LR | PSR | OLD_R0 |
+ @ R0 | R1 | ... | IP | SP + 4 | previous LR | LR | PSR | OLD_R0 |
- mov r3, sp @ struct pt_regs*
+ mov r3, sp @ struct pt_regs*
ldr r2, =function_trace_op
ldr r2, [r2] @ pointer to the current
@@ -112,11 +108,9 @@ ftrace_graph_regs_call:
#endif
@ pop saved regs
- ldmia sp!, {r0-r12} @ restore r0 through r12
- ldr ip, [sp, #8] @ restore PC
- ldr lr, [sp, #4] @ restore LR
- ldr sp, [sp, #0] @ restore SP
- mov pc, ip @ return
+ pop {r0-r11, ip, lr} @ restore r0 through r12
+ ldr lr, [sp], #4 @ restore LR
+ ldr pc, [sp], #12
.endm
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
@@ -132,11 +126,9 @@ ftrace_graph_regs_call:
bl prepare_ftrace_return
@ pop registers saved in ftrace_regs_caller
- ldmia sp!, {r0-r12} @ restore r0 through r12
- ldr ip, [sp, #8] @ restore PC
- ldr lr, [sp, #4] @ restore LR
- ldr sp, [sp, #0] @ restore SP
- mov pc, ip @ return
+ pop {r0-r11, ip, lr} @ restore r0 through r12
+ ldr lr, [sp], #4 @ restore LR
+ ldr pc, [sp], #12
.endm
#endif
@@ -202,16 +194,17 @@ ftrace_graph_call\suffix:
.endm
.macro mcount_exit
- ldmia sp!, {r0-r3, ip, lr}
- ret ip
+ ldmia sp!, {r0-r3}
+ ldr lr, [sp, #4]
+ ldr pc, [sp], #8
.endm
ENTRY(__gnu_mcount_nc)
UNWIND(.fnstart)
#ifdef CONFIG_DYNAMIC_FTRACE
- mov ip, lr
- ldmia sp!, {lr}
- ret ip
+ push {lr}
+ ldr lr, [sp, #4]
+ ldr pc, [sp], #8
#else
__mcount
#endif
--
2.34.1
From: Yajun Deng <[email protected]>
commit b37a466837393af72fe8bcb8f1436410f3f173f3 upstream.
Add the case if dev is NULL in dev_{put, hold}, so the caller doesn't
need to care whether dev is NULL or not.
Signed-off-by: Yajun Deng <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Cc: Pavel Machek <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/linux/netdevice.h | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -3980,7 +3980,8 @@ void netdev_run_todo(void);
*/
static inline void dev_put(struct net_device *dev)
{
- this_cpu_dec(*dev->pcpu_refcnt);
+ if (dev)
+ this_cpu_dec(*dev->pcpu_refcnt);
}
/**
@@ -3991,7 +3992,8 @@ static inline void dev_put(struct net_de
*/
static inline void dev_hold(struct net_device *dev)
{
- this_cpu_inc(*dev->pcpu_refcnt);
+ if (dev)
+ this_cpu_inc(*dev->pcpu_refcnt);
}
/* Carrier loss detection, dial on demand. The functions netif_carrier_on
From: Randy Dunlap <[email protected]>
[ Upstream commit f2544f5e6c691679d56bb38637d2f347075b36fa ]
__setup() handlers should return 1 if the parameter is handled.
Returning 0 causes the entire string to be added to init's
environment strings (limited to 32 strings), unnecessarily polluting it.
Using the documented string "evm=fix" causes an Unknown parameter message:
Unknown kernel command line parameters
"BOOT_IMAGE=/boot/bzImage-517rc5 evm=fix", will be passed to user space.
and that string is added to init's environment string space:
Run /sbin/init as init process
with arguments:
/sbin/init
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/boot/bzImage-517rc5
evm=fix
With this change, using "evm=fix" acts as expected and an invalid
option ("evm=evm") causes a warning to be printed:
evm: invalid "evm" mode
but init's environment is not polluted with this string, as expected.
Fixes: 7102ebcd65c1 ("evm: permit only valid security.evm xattrs to be updated")
Signed-off-by: Randy Dunlap <[email protected]>
Reported-by: Igor Zhbanov <[email protected]>
Link: lore.kernel.org/r/[email protected]
Signed-off-by: Mimi Zohar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
security/integrity/evm/evm_main.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/security/integrity/evm/evm_main.c b/security/integrity/evm/evm_main.c
index b929c683aba1..0033364ac404 100644
--- a/security/integrity/evm/evm_main.c
+++ b/security/integrity/evm/evm_main.c
@@ -62,7 +62,7 @@ static int __init evm_set_fixmode(char *str)
else
pr_err("invalid \"%s\" mode", str);
- return 0;
+ return 1;
}
__setup("evm=", evm_set_fixmode);
--
2.34.1
From: Miaoqian Lin <[email protected]>
[ Upstream commit ba18dad0fb880cd29aa97b6b75560ef14d1061ba ]
platform_get_irq() returns negative error number instead 0 on failure.
And the doc of platform_get_irq() provides a usage example:
int irq = platform_get_irq(pdev, 0);
if (irq < 0)
return irq;
Fix the check of return value to catch errors correctly.
Fixes: f7a388d6cd1c ("power: reset: Add a driver for the Gemini poweroff")
Signed-off-by: Miaoqian Lin <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Signed-off-by: Sebastian Reichel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/power/reset/gemini-poweroff.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/power/reset/gemini-poweroff.c b/drivers/power/reset/gemini-poweroff.c
index 90e35c07240a..b7f7a8225f22 100644
--- a/drivers/power/reset/gemini-poweroff.c
+++ b/drivers/power/reset/gemini-poweroff.c
@@ -107,8 +107,8 @@ static int gemini_poweroff_probe(struct platform_device *pdev)
return PTR_ERR(gpw->base);
irq = platform_get_irq(pdev, 0);
- if (!irq)
- return -EINVAL;
+ if (irq < 0)
+ return irq;
gpw->dev = dev;
--
2.34.1
From: Wang Hai <[email protected]>
[ Upstream commit 1791f487f877a9e83d81c8677bd3e7b259e7cb27 ]
I got a null-ptr-deref report:
BUG: kernel NULL pointer dereference, address: 0000000000000000
...
RIP: 0010:fb_destroy_modelist+0x38/0x100
...
Call Trace:
ufx_usb_probe.cold+0x2b5/0xac1 [smscufx]
usb_probe_interface+0x1aa/0x3c0 [usbcore]
really_probe+0x167/0x460
...
ret_from_fork+0x1f/0x30
If fb_alloc_cmap() fails in ufx_usb_probe(), fb_destroy_modelist() will
be called to destroy modelist in the error handling path. But modelist
has not been initialized yet, so it will result in null-ptr-deref.
Initialize modelist before calling fb_alloc_cmap() to fix this bug.
Fixes: 3c8a63e22a08 ("Add support for SMSC UFX6000/7000 USB display adapters")
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Wang Hai <[email protected]>
Acked-by: Thomas Zimmermann <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/video/fbdev/smscufx.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/video/fbdev/smscufx.c b/drivers/video/fbdev/smscufx.c
index bfac3ee4a642..28768c272b73 100644
--- a/drivers/video/fbdev/smscufx.c
+++ b/drivers/video/fbdev/smscufx.c
@@ -1656,6 +1656,7 @@ static int ufx_usb_probe(struct usb_interface *interface,
info->par = dev;
info->pseudo_palette = dev->pseudo_palette;
info->fbops = &ufx_ops;
+ INIT_LIST_HEAD(&info->modelist);
retval = fb_alloc_cmap(&info->cmap, 256, 0);
if (retval < 0) {
@@ -1666,8 +1667,6 @@ static int ufx_usb_probe(struct usb_interface *interface,
INIT_DELAYED_WORK(&dev->free_framebuffer_work,
ufx_free_framebuffer_work);
- INIT_LIST_HEAD(&info->modelist);
-
retval = ufx_reg_read(dev, 0x3000, &id_rev);
check_warn_goto_error(retval, "error %d reading 0x3000 register from device", retval);
dev_dbg(dev->gdev, "ID_REV register value 0x%08x", id_rev);
--
2.34.1
From: Joe Carnuccio <[email protected]>
commit 0d6a536cb1fcabb6c3e9c94871c8d0b29bb5813b upstream.
This is an update to the original 28xx adapter enablement. Add a bunch of
conditionals that are applicable for 28xx.
Link: https://lore.kernel.org/r/[email protected]
Fixes: ecc89f25e225 ("scsi: qla2xxx: Add Device ID for ISP28XX")
Cc: [email protected]
Signed-off-by: Joe Carnuccio <[email protected]>
Signed-off-by: Nilesh Javali <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/qla2xxx/qla_attr.c | 7 ++-----
drivers/scsi/qla2xxx/qla_init.c | 8 +++-----
drivers/scsi/qla2xxx/qla_mbx.c | 14 +++++++++++---
drivers/scsi/qla2xxx/qla_os.c | 3 +--
drivers/scsi/qla2xxx/qla_sup.c | 4 ++--
drivers/scsi/qla2xxx/qla_target.c | 3 +--
6 files changed, 20 insertions(+), 19 deletions(-)
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -555,7 +555,7 @@ qla2x00_sysfs_read_vpd(struct file *filp
if (!capable(CAP_SYS_ADMIN))
return -EINVAL;
- if (IS_NOCACHE_VPD_TYPE(ha))
+ if (!IS_NOCACHE_VPD_TYPE(ha))
goto skip;
faddr = ha->flt_region_vpd << 2;
@@ -739,7 +739,7 @@ qla2x00_sysfs_write_reset(struct file *f
ql_log(ql_log_info, vha, 0x706f,
"Issuing MPI reset.\n");
- if (IS_QLA83XX(ha) || IS_QLA27XX(ha) || IS_QLA28XX(ha)) {
+ if (IS_QLA83XX(ha)) {
uint32_t idc_control;
qla83xx_idc_lock(vha, 0);
@@ -1050,9 +1050,6 @@ qla2x00_free_sysfs_attr(scsi_qla_host_t
continue;
if (iter->type == 3 && !(IS_CNA_CAPABLE(ha)))
continue;
- if (iter->type == 0x27 &&
- (!IS_QLA27XX(ha) || !IS_QLA28XX(ha)))
- continue;
sysfs_remove_bin_file(&host->shost_gendev.kobj,
iter->attr);
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -3322,7 +3322,7 @@ qla2x00_alloc_fw_dump(scsi_qla_host_t *v
mem_size = (ha->fw_memory_size - 0x11000 + 1) *
sizeof(uint16_t);
} else if (IS_FWI2_CAPABLE(ha)) {
- if (IS_QLA83XX(ha) || IS_QLA27XX(ha) || IS_QLA28XX(ha))
+ if (IS_QLA83XX(ha))
fixed_size = offsetof(struct qla83xx_fw_dump, ext_mem);
else if (IS_QLA81XX(ha))
fixed_size = offsetof(struct qla81xx_fw_dump, ext_mem);
@@ -3334,8 +3334,7 @@ qla2x00_alloc_fw_dump(scsi_qla_host_t *v
mem_size = (ha->fw_memory_size - 0x100000 + 1) *
sizeof(uint32_t);
if (ha->mqenable) {
- if (!IS_QLA83XX(ha) && !IS_QLA27XX(ha) &&
- !IS_QLA28XX(ha))
+ if (!IS_QLA83XX(ha))
mq_size = sizeof(struct qla2xxx_mq_chain);
/*
* Allocate maximum buffer size for all queues - Q0.
@@ -3896,8 +3895,7 @@ enable_82xx_npiv:
ha->fw_major_version, ha->fw_minor_version,
ha->fw_subminor_version);
- if (IS_QLA83XX(ha) || IS_QLA27XX(ha) ||
- IS_QLA28XX(ha)) {
+ if (IS_QLA83XX(ha)) {
ha->flags.fac_supported = 0;
rval = QLA_SUCCESS;
}
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -9,6 +9,12 @@
#include <linux/delay.h>
#include <linux/gfp.h>
+#ifdef CONFIG_PPC
+#define IS_PPCARCH true
+#else
+#define IS_PPCARCH false
+#endif
+
static struct mb_cmd_name {
uint16_t cmd;
const char *str;
@@ -698,6 +704,9 @@ again:
vha->min_supported_speed =
nv->min_supported_speed;
}
+
+ if (IS_PPCARCH)
+ mcp->mb[11] |= BIT_4;
}
if (ha->flags.exlogins_enabled)
@@ -2984,8 +2993,7 @@ qla2x00_get_resource_cnts(scsi_qla_host_
ha->orig_fw_iocb_count = mcp->mb[10];
if (ha->flags.npiv_supported)
ha->max_npiv_vports = mcp->mb[11];
- if (IS_QLA81XX(ha) || IS_QLA83XX(ha) || IS_QLA27XX(ha) ||
- IS_QLA28XX(ha))
+ if (IS_QLA81XX(ha) || IS_QLA83XX(ha))
ha->fw_max_fcf_count = mcp->mb[12];
}
@@ -5546,7 +5554,7 @@ qla2x00_get_data_rate(scsi_qla_host_t *v
mcp->out_mb = MBX_1|MBX_0;
mcp->in_mb = MBX_2|MBX_1|MBX_0;
if (IS_QLA83XX(ha) || IS_QLA27XX(ha) || IS_QLA28XX(ha))
- mcp->in_mb |= MBX_3;
+ mcp->in_mb |= MBX_4|MBX_3;
mcp->tov = MBX_TOV_SECONDS;
mcp->flags = 0;
rval = qla2x00_mailbox_command(vha, mcp);
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -3673,8 +3673,7 @@ qla2x00_unmap_iobases(struct qla_hw_data
if (ha->mqiobase)
iounmap(ha->mqiobase);
- if ((IS_QLA83XX(ha) || IS_QLA27XX(ha) || IS_QLA28XX(ha)) &&
- ha->msixbase)
+ if (ha->msixbase)
iounmap(ha->msixbase);
}
}
--- a/drivers/scsi/qla2xxx/qla_sup.c
+++ b/drivers/scsi/qla2xxx/qla_sup.c
@@ -844,7 +844,7 @@ qla2xxx_get_flt_info(scsi_qla_host_t *vh
ha->flt_region_nvram = start;
break;
case FLT_REG_IMG_PRI_27XX:
- if (IS_QLA27XX(ha) && !IS_QLA28XX(ha))
+ if (IS_QLA27XX(ha) || IS_QLA28XX(ha))
ha->flt_region_img_status_pri = start;
break;
case FLT_REG_IMG_SEC_27XX:
@@ -1356,7 +1356,7 @@ next:
flash_data_addr(ha, faddr), le32_to_cpu(*dwptr));
if (ret) {
ql_dbg(ql_dbg_user, vha, 0x7006,
- "Failed slopw write %x (%x)\n", faddr, *dwptr);
+ "Failed slow write %x (%x)\n", faddr, *dwptr);
break;
}
}
--- a/drivers/scsi/qla2xxx/qla_target.c
+++ b/drivers/scsi/qla2xxx/qla_target.c
@@ -7077,8 +7077,7 @@ qlt_probe_one_stage1(struct scsi_qla_hos
if (!QLA_TGT_MODE_ENABLED())
return;
- if ((ql2xenablemsix == 0) || IS_QLA83XX(ha) || IS_QLA27XX(ha) ||
- IS_QLA28XX(ha)) {
+ if (ha->mqenable || IS_QLA83XX(ha) || IS_QLA27XX(ha) || IS_QLA28XX(ha)) {
ISP_ATIO_Q_IN(base_vha) = &ha->mqiobase->isp25mq.atio_q_in;
ISP_ATIO_Q_OUT(base_vha) = &ha->mqiobase->isp25mq.atio_q_out;
} else {
From: Hangyu Hua <[email protected]>
commit 04c9b00ba83594a29813d6b1fb8fdc93a3915174 upstream.
There is no need to call dev_kfree_skb() when usb_submit_urb() fails
because can_put_echo_skb() deletes original skb and
can_free_echo_skb() deletes the cloned skb.
Fixes: 51f3baad7de9 ("can: mcba_usb: Add support for Microchip CAN BUS Analyzer")
Link: https://lore.kernel.org/all/[email protected]
Signed-off-by: Hangyu Hua <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/can/usb/mcba_usb.c | 1 -
1 file changed, 1 deletion(-)
--- a/drivers/net/can/usb/mcba_usb.c
+++ b/drivers/net/can/usb/mcba_usb.c
@@ -368,7 +368,6 @@ static netdev_tx_t mcba_usb_start_xmit(s
xmit_failed:
can_free_echo_skb(priv->netdev, ctx->ndx);
mcba_usb_free_ctx(ctx);
- dev_kfree_skb(skb);
stats->tx_dropped++;
return NETDEV_TX_OK;
From: Ulf Hansson <[email protected]>
[ Upstream commit d6c9219ca1139b74541b2a98cee47a3426d754a9 ]
Even if the current WARN() notifies the user that something is severely
wrong, we can still end up in a PANIC() when trying to invoke the missing
->enable_sdio_irq() ops. Therefore, let's also return an error code and
prevent the host from being added.
While at it, move the code into a separate function to prepare for
subsequent changes and for further host caps validations.
Signed-off-by: Ulf Hansson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mmc/core/host.c | 15 +++++++++++++--
1 file changed, 13 insertions(+), 2 deletions(-)
diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c
index 864c8c205ff7..03e2f965a96a 100644
--- a/drivers/mmc/core/host.c
+++ b/drivers/mmc/core/host.c
@@ -513,6 +513,16 @@ struct mmc_host *mmc_alloc_host(int extra, struct device *dev)
EXPORT_SYMBOL(mmc_alloc_host);
+static int mmc_validate_host_caps(struct mmc_host *host)
+{
+ if (host->caps & MMC_CAP_SDIO_IRQ && !host->ops->enable_sdio_irq) {
+ dev_warn(host->parent, "missing ->enable_sdio_irq() ops\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
/**
* mmc_add_host - initialise host hardware
* @host: mmc host
@@ -525,8 +535,9 @@ int mmc_add_host(struct mmc_host *host)
{
int err;
- WARN_ON((host->caps & MMC_CAP_SDIO_IRQ) &&
- !host->ops->enable_sdio_irq);
+ err = mmc_validate_host_caps(host);
+ if (err)
+ return err;
err = device_add(&host->class_dev);
if (err)
--
2.34.1
From: Christophe JAILLET <[email protected]>
[ Upstream commit 5b3dc949f554379edcb8ef6111aa5ecb78feb798 ]
A successful ida_simple_get() should be balanced by a corresponding
ida_simple_remove().
Add the missing call in the error handling path of the probe.
While at it, switch to ida_alloc()/ida_free() instead to
ida_simple_get()/ida_simple_remove().
The latter is deprecated and more verbose.
Fixes: 4f556bc04e3c ("misc: cardreader: add new Alcor Micro Cardreader PCI driver")
Reviewed-by: Oleksij Rempel <[email protected]>
Signed-off-by: Christophe JAILLET <[email protected]>
Link: https://lore.kernel.org/r/918a9875b7f67b7f8f123c4446452603422e8c5e.1644136776.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/misc/cardreader/alcor_pci.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/misc/cardreader/alcor_pci.c b/drivers/misc/cardreader/alcor_pci.c
index de6d44a158bb..3f514d77a843 100644
--- a/drivers/misc/cardreader/alcor_pci.c
+++ b/drivers/misc/cardreader/alcor_pci.c
@@ -266,7 +266,7 @@ static int alcor_pci_probe(struct pci_dev *pdev,
if (!priv)
return -ENOMEM;
- ret = ida_simple_get(&alcor_pci_idr, 0, 0, GFP_KERNEL);
+ ret = ida_alloc(&alcor_pci_idr, GFP_KERNEL);
if (ret < 0)
return ret;
priv->id = ret;
@@ -280,7 +280,8 @@ static int alcor_pci_probe(struct pci_dev *pdev,
ret = pci_request_regions(pdev, DRV_NAME_ALCOR_PCI);
if (ret) {
dev_err(&pdev->dev, "Cannot request region\n");
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto error_free_ida;
}
if (!(pci_resource_flags(pdev, bar) & IORESOURCE_MEM)) {
@@ -324,6 +325,8 @@ static int alcor_pci_probe(struct pci_dev *pdev,
error_release_regions:
pci_release_regions(pdev);
+error_free_ida:
+ ida_free(&alcor_pci_idr, priv->id);
return ret;
}
@@ -337,7 +340,7 @@ static void alcor_pci_remove(struct pci_dev *pdev)
mfd_remove_devices(&pdev->dev);
- ida_simple_remove(&alcor_pci_idr, priv->id);
+ ida_free(&alcor_pci_idr, priv->id);
pci_release_regions(pdev);
pci_set_drvdata(pdev, NULL);
--
2.34.1
From: Johan Hovold <[email protected]>
commit 4a321de239213300a714fa0353a5f1272d381a44 upstream.
Make sure to balance the runtime PM usage counter on driver unbind.
Fixes: 407ccc65bfd2 ("[media] davinci: vpif: add pm_runtime support")
Cc: [email protected] # 3.9
Cc: Lad, Prabhakar <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Reviewed-by: Lad Prabhakar <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/platform/davinci/vpif.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/media/platform/davinci/vpif.c
+++ b/drivers/media/platform/davinci/vpif.c
@@ -497,6 +497,7 @@ static int vpif_probe(struct platform_de
static int vpif_remove(struct platform_device *pdev)
{
+ pm_runtime_put(&pdev->dev);
pm_runtime_disable(&pdev->dev);
return 0;
}
From: Charan Teja Kalla <[email protected]>
commit e6b0a7b357659c332231621e4315658d062c23ee upstream.
This reverts commit 08095d6310a7 ("mm: madvise: skip unmapped vma holes
passed to process_madvise") as process_madvise() fails to return the
exact processed bytes in other cases too.
As an example: if process_madvise() hits mlocked pages after processing
some initial bytes passed in [start, end), it just returns EINVAL
although some bytes are processed. Thus making an exception only for
ENOMEM is partially fixing the problem of returning the proper advised
bytes.
Thus revert this patch and return proper bytes advised.
Link: https://lkml.kernel.org/r/e73da1304a88b6a8a11907045117cccf4c2b8374.1648046642.git.quic_charante@quicinc.com
Fixes: 08095d6310a7ce ("mm: madvise: skip unmapped vma holes passed to process_madvise")
Signed-off-by: Charan Teja Kalla <[email protected]>
Acked-by: Michal Hocko <[email protected]>
Cc: Suren Baghdasaryan <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Cc: David Rientjes <[email protected]>
Cc: Nadav Amit <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/madvise.c | 9 +--------
1 file changed, 1 insertion(+), 8 deletions(-)
--- a/mm/madvise.c
+++ b/mm/madvise.c
@@ -1222,16 +1222,9 @@ SYSCALL_DEFINE5(process_madvise, int, pi
while (iov_iter_count(&iter)) {
iovec = iov_iter_iovec(&iter);
- /*
- * do_madvise returns ENOMEM if unmapped holes are present
- * in the passed VMA. process_madvise() is expected to skip
- * unmapped holes passed to it in the 'struct iovec' list
- * and not fail because of them. Thus treat -ENOMEM return
- * from do_madvise as valid and continue processing.
- */
ret = do_madvise(mm, (unsigned long)iovec.iov_base,
iovec.iov_len, behavior);
- if (ret < 0 && ret != -ENOMEM)
+ if (ret < 0)
break;
iov_iter_advance(&iter, iovec.iov_len);
}
From: José Expósito <[email protected]>
commit 8b188fba75195745026e11d408e4a7e94e01d701 upstream.
This reverts commit 37ef4c19b4c659926ce65a7ac709ceaefb211c40.
The touchpad present in the Dell Precision 7550 and 7750 laptops
reports a HID_DG_BUTTONTYPE of type MT_BUTTONTYPE_CLICKPAD. However,
the device is not a clickpad, it is a touchpad with physical buttons.
In order to fix this issue, a quirk for the device was introduced in
libinput [1] [2] to disable the INPUT_PROP_BUTTONPAD property:
[Precision 7x50 Touchpad]
MatchBus=i2c
MatchUdevType=touchpad
MatchDMIModalias=dmi:*svnDellInc.:pnPrecision7?50*
AttrInputPropDisable=INPUT_PROP_BUTTONPAD
However, because of the change introduced in 37ef4c19b4 ("Input: clear
BTN_RIGHT/MIDDLE on buttonpads") the BTN_RIGHT key bit is not mapped
anymore breaking the device right click button and making impossible to
workaround it in user space.
In order to avoid breakage on other present or future devices, revert
the patch causing the issue.
Signed-off-by: José Expósito <[email protected]>
Reviewed-by: Hans de Goede <[email protected]>
Acked-by: Peter Hutterer <[email protected]>
Acked-by: Benjamin Tissoires <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/input/input.c | 6 ------
1 file changed, 6 deletions(-)
--- a/drivers/input/input.c
+++ b/drivers/input/input.c
@@ -2179,12 +2179,6 @@ int input_register_device(struct input_d
/* KEY_RESERVED is not supposed to be transmitted to userspace. */
__clear_bit(KEY_RESERVED, dev->keybit);
- /* Buttonpads should not map BTN_RIGHT and/or BTN_MIDDLE. */
- if (test_bit(INPUT_PROP_BUTTONPAD, dev->propbit)) {
- __clear_bit(BTN_RIGHT, dev->keybit);
- __clear_bit(BTN_MIDDLE, dev->keybit);
- }
-
/* Make sure that bitmasks not mentioned in dev->evbit are clean. */
input_cleanse_bitmasks(dev);
From: Wang Yufen <[email protected]>
[ Upstream commit 84472b436e760ba439e1969a9e3c5ae7c86de39d ]
In tcp_bpf_send_verdict(), if msg has more data after
tcp_bpf_sendmsg_redir():
tcp_bpf_send_verdict()
tosend = msg->sg.size //msg->sg.size = 22220
case __SK_REDIRECT:
sk_msg_return() //uncharged msg->sg.size(22220) sk->sk_forward_alloc
tcp_bpf_sendmsg_redir() //after tcp_bpf_sendmsg_redir, msg->sg.size=11000
goto more_data;
tosend = msg->sg.size //msg->sg.size = 11000
case __SK_REDIRECT:
sk_msg_return() //uncharged msg->sg.size(11000) to sk->sk_forward_alloc
The msg->sg.size(11000) has been uncharged twice, to fix we can charge the
remaining msg->sg.size before goto more data.
This issue can cause the following info:
WARNING: CPU: 0 PID: 9860 at net/core/stream.c:208 sk_stream_kill_queues+0xd4/0x1a0
Call Trace:
<TASK>
inet_csk_destroy_sock+0x55/0x110
__tcp_close+0x279/0x470
tcp_close+0x1f/0x60
inet_release+0x3f/0x80
__sock_release+0x3d/0xb0
sock_close+0x11/0x20
__fput+0x92/0x250
task_work_run+0x6a/0xa0
do_exit+0x33b/0xb60
do_group_exit+0x2f/0xa0
get_signal+0xb6/0x950
arch_do_signal_or_restart+0xac/0x2a0
? vfs_write+0x237/0x290
exit_to_user_mode_prepare+0xa9/0x200
syscall_exit_to_user_mode+0x12/0x30
do_syscall_64+0x46/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
</TASK>
WARNING: CPU: 0 PID: 2136 at net/ipv4/af_inet.c:155 inet_sock_destruct+0x13c/0x260
Call Trace:
<TASK>
__sk_destruct+0x24/0x1f0
sk_psock_destroy+0x19b/0x1c0
process_one_work+0x1b3/0x3c0
worker_thread+0x30/0x350
? process_one_work+0x3c0/0x3c0
kthread+0xe6/0x110
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x22/0x30
</TASK>
Fixes: 604326b41a6f ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: Wang Yufen <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: John Fastabend <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
net/ipv4/tcp_bpf.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/net/ipv4/tcp_bpf.c b/net/ipv4/tcp_bpf.c
index 6b745ce4108c..c089e8166fa9 100644
--- a/net/ipv4/tcp_bpf.c
+++ b/net/ipv4/tcp_bpf.c
@@ -371,7 +371,7 @@ static int tcp_bpf_send_verdict(struct sock *sk, struct sk_psock *psock,
cork = true;
psock->cork = NULL;
}
- sk_msg_return(sk, msg, tosend);
+ sk_msg_return(sk, msg, msg->sg.size);
release_sock(sk);
ret = tcp_bpf_sendmsg_redir(sk_redir, msg, tosend, flags);
@@ -411,8 +411,11 @@ static int tcp_bpf_send_verdict(struct sock *sk, struct sk_psock *psock,
}
if (msg &&
msg->sg.data[msg->sg.start].page_link &&
- msg->sg.data[msg->sg.start].length)
+ msg->sg.data[msg->sg.start].length) {
+ if (eval == __SK_REDIRECT)
+ sk_mem_charge(sk, msg->sg.size);
goto more_data;
+ }
}
return ret;
}
--
2.34.1
From: Lorenzo Bianconi <[email protected]>
[ Upstream commit 6a6f457ed5fdf6777536c20644a9e42128a50ec2 ]
Check sta_rates pointer value in mt7615_sta_rate_tbl_update routine
since minstrel_ht_update_rates can fail allocating rates array.
Fixes: 04b8e65922f63 ("mt76: add mac80211 driver for MT7615 PCIe-based chipsets")
Signed-off-by: Lorenzo Bianconi <[email protected]>
Signed-off-by: Felix Fietkau <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/mediatek/mt76/mt7615/main.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/main.c b/drivers/net/wireless/mediatek/mt76/mt7615/main.c
index 88cdc2badeae..defa207f53d6 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/main.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/main.c
@@ -673,6 +673,9 @@ static void mt7615_sta_rate_tbl_update(struct ieee80211_hw *hw,
struct ieee80211_sta_rates *sta_rates = rcu_dereference(sta->rates);
int i;
+ if (!sta_rates)
+ return;
+
spin_lock_bh(&dev->mt76.lock);
for (i = 0; i < ARRAY_SIZE(msta->rates); i++) {
msta->rates[i].idx = sta_rates->rate[i].idx;
--
2.34.1
From: Jiasheng Jiang <[email protected]>
[ Upstream commit e6a21a14106d9718aa4f8e115b1e474888eeba44 ]
As the possible failure of the vzalloc(), e->encoder_buf might be NULL.
Therefore, it should be better to check it in order
to guarantee the success of the initialization.
If fails, we need to free not only 'e' but also 'e->name'.
Also, if the allocation for ctx fails, we need to free 'e->encoder_buf'
else.
Fixes: f90cf6079bf6 ("media: vidtv: add a bridge driver")
Signed-off-by: Jiasheng Jiang <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/test-drivers/vidtv/vidtv_s302m.c | 17 +++++++++++++----
1 file changed, 13 insertions(+), 4 deletions(-)
diff --git a/drivers/media/test-drivers/vidtv/vidtv_s302m.c b/drivers/media/test-drivers/vidtv/vidtv_s302m.c
index d79b65854627..4676083cee3b 100644
--- a/drivers/media/test-drivers/vidtv/vidtv_s302m.c
+++ b/drivers/media/test-drivers/vidtv/vidtv_s302m.c
@@ -455,6 +455,9 @@ struct vidtv_encoder
e->name = kstrdup(args.name, GFP_KERNEL);
e->encoder_buf = vzalloc(VIDTV_S302M_BUF_SZ);
+ if (!e->encoder_buf)
+ goto out_kfree_e;
+
e->encoder_buf_sz = VIDTV_S302M_BUF_SZ;
e->encoder_buf_offset = 0;
@@ -467,10 +470,8 @@ struct vidtv_encoder
e->is_video_encoder = false;
ctx = kzalloc(priv_sz, GFP_KERNEL);
- if (!ctx) {
- kfree(e);
- return NULL;
- }
+ if (!ctx)
+ goto out_kfree_buf;
e->ctx = ctx;
ctx->last_duration = 0;
@@ -498,6 +499,14 @@ struct vidtv_encoder
e->next = NULL;
return e;
+
+out_kfree_buf:
+ kfree(e->encoder_buf);
+
+out_kfree_e:
+ kfree(e->name);
+ kfree(e);
+ return NULL;
}
void vidtv_s302m_encoder_destroy(struct vidtv_encoder *e)
--
2.34.1
From: Theodore Ts'o <[email protected]>
[ Upstream commit cc5095747edfb054ca2068d01af20be3fcc3634f ]
[un]pin_user_pages_remote is dirtying pages without properly warning
the file system in advance. A related race was noted by Jan Kara in
2018[1]; however, more recently instead of it being a very hard-to-hit
race, it could be reliably triggered by process_vm_writev(2) which was
discovered by Syzbot[2].
This is technically a bug in mm/gup.c, but arguably ext4 is fragile in
that if some other kernel subsystem dirty pages without properly
notifying the file system using page_mkwrite(), ext4 will BUG, while
other file systems will not BUG (although data will still be lost).
So instead of crashing with a BUG, issue a warning (since there may be
potential data loss) and just mark the page as clean to avoid
unprivileged denial of service attacks until the problem can be
properly fixed. More discussion and background can be found in the
thread starting at [2].
[1] https://lore.kernel.org/linux-mm/[email protected]
[2] https://lore.kernel.org/r/[email protected]
Reported-by: syzbot+d59332e2db681cf18f0318a06e994ebbb529a8db@syzkaller.appspotmail.com
Reported-by: Lee Jones <[email protected]>
Signed-off-by: Theodore Ts'o <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
fs/ext4/inode.c | 25 +++++++++++++++++++++++++
1 file changed, 25 insertions(+)
diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index d59474a54189..96546df39bcf 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -2023,6 +2023,15 @@ static int ext4_writepage(struct page *page,
else
len = PAGE_SIZE;
+ /* Should never happen but for bugs in other kernel subsystems */
+ if (!page_has_buffers(page)) {
+ ext4_warning_inode(inode,
+ "page %lu does not have buffers attached", page->index);
+ ClearPageDirty(page);
+ unlock_page(page);
+ return 0;
+ }
+
page_bufs = page_buffers(page);
/*
* We cannot do block allocation or other extent handling in this
@@ -2626,6 +2635,22 @@ static int mpage_prepare_extent_to_map(struct mpage_da_data *mpd)
wait_on_page_writeback(page);
BUG_ON(PageWriteback(page));
+ /*
+ * Should never happen but for buggy code in
+ * other subsystems that call
+ * set_page_dirty() without properly warning
+ * the file system first. See [1] for more
+ * information.
+ *
+ * [1] https://lore.kernel.org/linux-mm/[email protected]
+ */
+ if (!page_has_buffers(page)) {
+ ext4_warning_inode(mpd->inode, "page %lu does not have buffers attached", page->index);
+ ClearPageDirty(page);
+ unlock_page(page);
+ continue;
+ }
+
if (mpd->map.m_len == 0)
mpd->first_page = page->index;
mpd->next_page = page->index + 1;
--
2.34.1
From: Maor Gottlieb <[email protected]>
[ Upstream commit 32a88d16615c2be295571c29273c4ac94cb75309 ]
Add missing assignment of MR type to IB_MR_TYPE_USER.
Fixes: 33006bd4f37f ("IB/core: Introduce ib_reg_user_mr")
Link: https://lore.kernel.org/r/be2e91bcd6e52dc36be289ae92f30d3a5cc6dcb1.1642491047.git.leonro@nvidia.com
Signed-off-by: Maor Gottlieb <[email protected]>
Signed-off-by: Leon Romanovsky <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/core/verbs.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/infiniband/core/verbs.c b/drivers/infiniband/core/verbs.c
index 3d895cc41c3a..597e889ba831 100644
--- a/drivers/infiniband/core/verbs.c
+++ b/drivers/infiniband/core/verbs.c
@@ -2078,6 +2078,7 @@ struct ib_mr *ib_reg_user_mr(struct ib_pd *pd, u64 start, u64 length,
return mr;
mr->device = pd->device;
+ mr->type = IB_MR_TYPE_USER;
mr->pd = pd;
mr->dm = NULL;
atomic_inc(&pd->usecnt);
--
2.34.1
From: Colin Ian King <[email protected]>
commit 02a95374b5eebdbd3b6413fd7ddec151d2ea75a1 upstream.
Currently tx_params is being re-assigned with a new value and the
previous setting IEEE80211_HT_MCS_TX_RX_DIFF is being overwritten.
The assignment operator is incorrect, the original intent was to
bit-wise or the value in. Fix this by replacing the = operator
with |= instead.
Kudos to Christian Lamparter for suggesting the correct fix.
Fixes: fe8ee9ad80b2 ("carl9170: mac80211 glue and command interface")
Signed-off-by: Colin Ian King <[email protected]>
Cc: <[email protected]>
Acked-by: Christian Lamparter <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/ath/carl9170/main.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/wireless/ath/carl9170/main.c
+++ b/drivers/net/wireless/ath/carl9170/main.c
@@ -1916,7 +1916,7 @@ static int carl9170_parse_eeprom(struct
WARN_ON(!(tx_streams >= 1 && tx_streams <=
IEEE80211_HT_MCS_TX_MAX_STREAMS));
- tx_params = (tx_streams - 1) <<
+ tx_params |= (tx_streams - 1) <<
IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT;
carl9170_band_2GHz.ht_cap.mcs.tx_params |= tx_params;
From: Dan Williams <[email protected]>
[ Upstream commit d9d290d7e659e9db3e4518040cc18b97f5535f4a ]
In preparation for removing BLK aperture support the NVDIMM unit tests
discovered that the default alignment can be set higher than the
capacity of the region. Fall back to PAGE_SIZE in that case.
Given this has not been seen in the wild, elide notifying -stable.
Fixes: 2522afb86a8c ("libnvdimm/region: Introduce an 'align' attribute")
Reviewed-by: Christoph Hellwig <[email protected]>
Link: https://lore.kernel.org/r/164688416128.2879318.17890707310125575258.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/nvdimm/region_devs.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/nvdimm/region_devs.c b/drivers/nvdimm/region_devs.c
index e05cc9f8a9fd..1d72653b5c8d 100644
--- a/drivers/nvdimm/region_devs.c
+++ b/drivers/nvdimm/region_devs.c
@@ -1018,6 +1018,9 @@ static unsigned long default_align(struct nd_region *nd_region)
}
}
+ if (nd_region->ndr_size < MEMREMAP_COMPAT_ALIGN_MAX)
+ align = PAGE_SIZE;
+
mappings = max_t(u16, 1, nd_region->ndr_mappings);
div_u64_rem(align, mappings, &remainder);
if (remainder)
--
2.34.1
From: Dirk Müller <[email protected]>
commit a5359ddd052860bacf957e65fe819c63e974b3a6 upstream.
GCC 10+ defaults to -fno-common, which enforces proper declaration of
external references using "extern". without this change a link would
fail with:
lib/raid6/test/algos.c:28: multiple definition of `raid6_call';
lib/raid6/test/test.c:22: first defined here
the pq.h header that is included already includes an extern declaration
so we can just remove the redundant one here.
Cc: <[email protected]>
Signed-off-by: Dirk Müller <[email protected]>
Reviewed-by: Paul Menzel <[email protected]>
Signed-off-by: Song Liu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
lib/raid6/test/test.c | 1 -
1 file changed, 1 deletion(-)
--- a/lib/raid6/test/test.c
+++ b/lib/raid6/test/test.c
@@ -19,7 +19,6 @@
#define NDISKS 16 /* Including P and Q */
const char raid6_empty_zero_page[PAGE_SIZE] __attribute__((aligned(PAGE_SIZE)));
-struct raid6_calls raid6_call;
char *dataptrs[NDISKS];
char data[NDISKS][PAGE_SIZE] __attribute__((aligned(PAGE_SIZE)));
From: Dan Carpenter <[email protected]>
commit 184416d4b98509fb4c3d8fc3d6dc1437896cc159 upstream.
Smatch complains:
fs/nfsd/nfsxdr.c:341 nfssvc_decode_writeargs()
warn: no lower bound on 'args->len'
Change the type to unsigned to prevent this issue.
Cc: [email protected]
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Chuck Lever <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/nfsd/nfsproc.c | 2 +-
fs/nfsd/xdr.h | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
--- a/fs/nfsd/nfsproc.c
+++ b/fs/nfsd/nfsproc.c
@@ -223,7 +223,7 @@ nfsd_proc_write(struct svc_rqst *rqstp)
unsigned long cnt = argp->len;
unsigned int nvecs;
- dprintk("nfsd: WRITE %s %d bytes at %d\n",
+ dprintk("nfsd: WRITE %s %u bytes at %d\n",
SVCFH_fmt(&argp->fh),
argp->len, argp->offset);
--- a/fs/nfsd/xdr.h
+++ b/fs/nfsd/xdr.h
@@ -33,7 +33,7 @@ struct nfsd_readargs {
struct nfsd_writeargs {
svc_fh fh;
__u32 offset;
- int len;
+ __u32 len;
struct kvec first;
};
From: Christophe JAILLET <[email protected]>
[ Upstream commit 025c6643a81564f066d8381b9e2f4603e0f8438f ]
Add a missing 'host1x_channel_list_free()' call in the remove function,
as already done in the error handling path of the probe function.
Fixes: 8474b02531c4 ("gpu: host1x: Refactor channel allocation code")
Signed-off-by: Christophe JAILLET <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/host1x/dev.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/gpu/host1x/dev.c b/drivers/gpu/host1x/dev.c
index a2c09dca4eef..8659558b518d 100644
--- a/drivers/gpu/host1x/dev.c
+++ b/drivers/gpu/host1x/dev.c
@@ -520,6 +520,7 @@ static int host1x_remove(struct platform_device *pdev)
host1x_syncpt_deinit(host);
reset_control_assert(host->rst);
clk_disable_unprepare(host->clk);
+ host1x_channel_list_free(&host->channel_list);
host1x_iommu_exit(host);
return 0;
--
2.34.1
From: Miaoqian Lin <[email protected]>
[ Upstream commit 6d6ef58c2470da85a99119f74d34216c8074b9f0 ]
The reference taken by 'of_find_device_by_node()' must be released when
not needed anymore.
Add the corresponding 'put_device()' in the error handling path.
Fixes: 2db04f16b589 ("clk: tegra: Add EMC clock driver")
Signed-off-by: Miaoqian Lin <[email protected]>
Acked-by: Thierry Reding <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/tegra/clk-tegra124-emc.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/clk/tegra/clk-tegra124-emc.c b/drivers/clk/tegra/clk-tegra124-emc.c
index 745f9faa98d8..733a962ff521 100644
--- a/drivers/clk/tegra/clk-tegra124-emc.c
+++ b/drivers/clk/tegra/clk-tegra124-emc.c
@@ -191,6 +191,7 @@ static struct tegra_emc *emc_ensure_emc_driver(struct tegra_clk_emc *tegra)
tegra->emc = platform_get_drvdata(pdev);
if (!tegra->emc) {
+ put_device(&pdev->dev);
pr_err("%s: cannot find EMC driver\n", __func__);
return NULL;
}
--
2.34.1
From: Yang Yingliang <[email protected]>
[ Upstream commit 3f3475a5c77e9eabab43537f713b90f1d19258b7 ]
Convert list_for_each() to list_for_each_entry() where
applicable.
Signed-off-by: Yang Yingliang <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/pci/saa7134/saa7134-alsa.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/media/pci/saa7134/saa7134-alsa.c b/drivers/media/pci/saa7134/saa7134-alsa.c
index 7a1fb067b0e0..fb24d2ed3621 100644
--- a/drivers/media/pci/saa7134/saa7134-alsa.c
+++ b/drivers/media/pci/saa7134/saa7134-alsa.c
@@ -1215,15 +1215,13 @@ static int alsa_device_exit(struct saa7134_dev *dev)
static int saa7134_alsa_init(void)
{
struct saa7134_dev *dev = NULL;
- struct list_head *list;
saa7134_dmasound_init = alsa_device_init;
saa7134_dmasound_exit = alsa_device_exit;
pr_info("saa7134 ALSA driver for DMA sound loaded\n");
- list_for_each(list,&saa7134_devlist) {
- dev = list_entry(list, struct saa7134_dev, devlist);
+ list_for_each_entry(dev, &saa7134_devlist, devlist) {
if (dev->pci->device == PCI_DEVICE_ID_PHILIPS_SAA7130)
pr_info("%s/alsa: %s doesn't support digital audio\n",
dev->name, saa7134_boards[dev->board].name);
--
2.34.1
From: Hangyu Hua <[email protected]>
commit 3d3925ff6433f98992685a9679613a2cc97f3ce2 upstream.
There is no need to call dev_kfree_skb() when usb_submit_urb() fails
because can_put_echo_skb() deletes original skb and
can_free_echo_skb() deletes the cloned skb.
Fixes: 0024d8ad1639 ("can: usb_8dev: Add support for USB2CAN interface from 8 devices")
Link: https://lore.kernel.org/all/[email protected]
Cc: [email protected]
Signed-off-by: Hangyu Hua <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/can/usb/usb_8dev.c | 30 ++++++++++++++----------------
1 file changed, 14 insertions(+), 16 deletions(-)
--- a/drivers/net/can/usb/usb_8dev.c
+++ b/drivers/net/can/usb/usb_8dev.c
@@ -670,9 +670,20 @@ static netdev_tx_t usb_8dev_start_xmit(s
atomic_inc(&priv->active_tx_urbs);
err = usb_submit_urb(urb, GFP_ATOMIC);
- if (unlikely(err))
- goto failed;
- else if (atomic_read(&priv->active_tx_urbs) >= MAX_TX_URBS)
+ if (unlikely(err)) {
+ can_free_echo_skb(netdev, context->echo_index);
+
+ usb_unanchor_urb(urb);
+ usb_free_coherent(priv->udev, size, buf, urb->transfer_dma);
+
+ atomic_dec(&priv->active_tx_urbs);
+
+ if (err == -ENODEV)
+ netif_device_detach(netdev);
+ else
+ netdev_warn(netdev, "failed tx_urb %d\n", err);
+ stats->tx_dropped++;
+ } else if (atomic_read(&priv->active_tx_urbs) >= MAX_TX_URBS)
/* Slow down tx path */
netif_stop_queue(netdev);
@@ -691,19 +702,6 @@ nofreecontext:
return NETDEV_TX_BUSY;
-failed:
- can_free_echo_skb(netdev, context->echo_index);
-
- usb_unanchor_urb(urb);
- usb_free_coherent(priv->udev, size, buf, urb->transfer_dma);
-
- atomic_dec(&priv->active_tx_urbs);
-
- if (err == -ENODEV)
- netif_device_detach(netdev);
- else
- netdev_warn(netdev, "failed tx_urb %d\n", err);
-
nomembuf:
usb_free_urb(urb);
From: Hangyu Hua <[email protected]>
commit c70222752228a62135cee3409dccefd494a24646 upstream.
There is no need to call dev_kfree_skb() when usb_submit_urb() fails
beacause can_put_echo_skb() deletes the original skb and
can_free_echo_skb() deletes the cloned skb.
Link: https://lore.kernel.org/all/[email protected]
Fixes: 702171adeed3 ("ems_usb: Added support for EMS CPC-USB/ARM7 CAN/USB interface")
Cc: [email protected]
Cc: Sebastian Haas <[email protected]>
Signed-off-by: Hangyu Hua <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/can/usb/ems_usb.c | 1 -
1 file changed, 1 deletion(-)
--- a/drivers/net/can/usb/ems_usb.c
+++ b/drivers/net/can/usb/ems_usb.c
@@ -823,7 +823,6 @@ static netdev_tx_t ems_usb_start_xmit(st
usb_unanchor_urb(urb);
usb_free_coherent(dev->udev, size, buf, urb->transfer_dma);
- dev_kfree_skb(skb);
atomic_dec(&dev->active_tx_urbs);
From: Uwe Kleine-König <[email protected]>
[ Upstream commit 4036b29a146b2749af3bb213b003eb69f3e5ecc4 ]
Make sure in .probe() to set driver data before the function is left to
make it possible in .remove() to undo the actions done.
This fixes a potential memory leak and stops returning an error code in
.remove() that is ignored by the driver core anyhow.
Signed-off-by: Uwe Kleine-König <[email protected]>
Reviewed-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/mach-mmp/sram.c | 22 ++++++++++++----------
1 file changed, 12 insertions(+), 10 deletions(-)
diff --git a/arch/arm/mach-mmp/sram.c b/arch/arm/mach-mmp/sram.c
index 6794e2db1ad5..ecc46c31004f 100644
--- a/arch/arm/mach-mmp/sram.c
+++ b/arch/arm/mach-mmp/sram.c
@@ -72,6 +72,8 @@ static int sram_probe(struct platform_device *pdev)
if (!info)
return -ENOMEM;
+ platform_set_drvdata(pdev, info);
+
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (res == NULL) {
dev_err(&pdev->dev, "no memory resource defined\n");
@@ -107,8 +109,6 @@ static int sram_probe(struct platform_device *pdev)
list_add(&info->node, &sram_bank_list);
mutex_unlock(&sram_lock);
- platform_set_drvdata(pdev, info);
-
dev_info(&pdev->dev, "initialized\n");
return 0;
@@ -127,17 +127,19 @@ static int sram_remove(struct platform_device *pdev)
struct sram_bank_info *info;
info = platform_get_drvdata(pdev);
- if (info == NULL)
- return -ENODEV;
- mutex_lock(&sram_lock);
- list_del(&info->node);
- mutex_unlock(&sram_lock);
+ if (info->sram_size) {
+ mutex_lock(&sram_lock);
+ list_del(&info->node);
+ mutex_unlock(&sram_lock);
+
+ gen_pool_destroy(info->gpool);
+ iounmap(info->sram_virt);
+ kfree(info->pool_name);
+ }
- gen_pool_destroy(info->gpool);
- iounmap(info->sram_virt);
- kfree(info->pool_name);
kfree(info);
+
return 0;
}
--
2.34.1
From: Fengnan Chang <[email protected]>
[ Upstream commit 7eab7a6968278c735b1ca6387056a408f7960265 ]
when we overwrite the whole page in cluster, we don't need read original
data before write, because after write_end(), writepages() can help to
load left data in that cluster.
Signed-off-by: Fengnan Chang <[email protected]>
Signed-off-by: Chao Yu <[email protected]>
Acked-by: Chao Yu <[email protected]>
Signed-off-by: Jaegeuk Kim <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/f2fs/data.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/fs/f2fs/data.c b/fs/f2fs/data.c
index d27a92a54447..04e980c58319 100644
--- a/fs/f2fs/data.c
+++ b/fs/f2fs/data.c
@@ -3461,6 +3461,9 @@ static int f2fs_write_begin(struct file *file, struct address_space *mapping,
*fsdata = NULL;
+ if (len == PAGE_SIZE)
+ goto repeat;
+
ret = f2fs_prepare_compress_overwrite(inode, pagep,
index, fsdata);
if (ret < 0) {
--
2.34.1
From: Zhihao Cheng <[email protected]>
commit 4f2262a334641e05f645364d5ade1f565c85f20b upstream.
Function ubifs_wbuf_write_nolock() may access buf out of bounds in
following process:
ubifs_wbuf_write_nolock():
aligned_len = ALIGN(len, 8); // Assume len = 4089, aligned_len = 4096
if (aligned_len <= wbuf->avail) ... // Not satisfy
if (wbuf->used) {
ubifs_leb_write() // Fill some data in avail wbuf
len -= wbuf->avail; // len is still not 8-bytes aligned
aligned_len -= wbuf->avail;
}
n = aligned_len >> c->max_write_shift;
if (n) {
n <<= c->max_write_shift;
err = ubifs_leb_write(c, wbuf->lnum, buf + written,
wbuf->offs, n);
// n > len, read out of bounds less than 8(n-len) bytes
}
, which can be catched by KASAN:
=========================================================
BUG: KASAN: slab-out-of-bounds in ecc_sw_hamming_calculate+0x1dc/0x7d0
Read of size 4 at addr ffff888105594ff8 by task kworker/u8:4/128
Workqueue: writeback wb_workfn (flush-ubifs_0_0)
Call Trace:
kasan_report.cold+0x81/0x165
nand_write_page_swecc+0xa9/0x160
ubifs_leb_write+0xf2/0x1b0 [ubifs]
ubifs_wbuf_write_nolock+0x421/0x12c0 [ubifs]
write_head+0xdc/0x1c0 [ubifs]
ubifs_jnl_write_inode+0x627/0x960 [ubifs]
wb_workfn+0x8af/0xb80
Function ubifs_wbuf_write_nolock() accepts that parameter 'len' is not 8
bytes aligned, the 'len' represents the true length of buf (which is
allocated in 'ubifs_jnl_xxx', eg. ubifs_jnl_write_inode), so
ubifs_wbuf_write_nolock() must handle the length read from 'buf' carefully
to write leb safely.
Fetch a reproducer in [Link].
Fixes: 1e51764a3c2ac0 ("UBIFS: add new flash file system")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=214785
Reported-by: Chengsong Ke <[email protected]>
Signed-off-by: Zhihao Cheng <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ubifs/io.c | 34 ++++++++++++++++++++++++++++++----
1 file changed, 30 insertions(+), 4 deletions(-)
--- a/fs/ubifs/io.c
+++ b/fs/ubifs/io.c
@@ -846,16 +846,42 @@ int ubifs_wbuf_write_nolock(struct ubifs
*/
n = aligned_len >> c->max_write_shift;
if (n) {
- n <<= c->max_write_shift;
+ int m = n - 1;
+
dbg_io("write %d bytes to LEB %d:%d", n, wbuf->lnum,
wbuf->offs);
- err = ubifs_leb_write(c, wbuf->lnum, buf + written,
- wbuf->offs, n);
+
+ if (m) {
+ /* '(n-1)<<c->max_write_shift < len' is always true. */
+ m <<= c->max_write_shift;
+ err = ubifs_leb_write(c, wbuf->lnum, buf + written,
+ wbuf->offs, m);
+ if (err)
+ goto out;
+ wbuf->offs += m;
+ aligned_len -= m;
+ len -= m;
+ written += m;
+ }
+
+ /*
+ * The non-written len of buf may be less than 'n' because
+ * parameter 'len' is not 8 bytes aligned, so here we read
+ * min(len, n) bytes from buf.
+ */
+ n = 1 << c->max_write_shift;
+ memcpy(wbuf->buf, buf + written, min(len, n));
+ if (n > len) {
+ ubifs_assert(c, n - len < 8);
+ ubifs_pad(c, wbuf->buf + len, n - len);
+ }
+
+ err = ubifs_leb_write(c, wbuf->lnum, wbuf->buf, wbuf->offs, n);
if (err)
goto out;
wbuf->offs += n;
aligned_len -= n;
- len -= n;
+ len -= min(len, n);
written += n;
}
From: Dan Carpenter <[email protected]>
[ Upstream commit fee5c1e4b789e41719af9fee0e2dd397cd31988f ]
If "sinfo->config" is not found, then return -ENODEV. Don't
return success.
Fixes: b985172b328a ("video: atmel_lcdfb: add device tree suport")
Signed-off-by: Dan Carpenter <[email protected]>
Acked-by: Nicolas Ferre <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/video/fbdev/atmel_lcdfb.c | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/drivers/video/fbdev/atmel_lcdfb.c b/drivers/video/fbdev/atmel_lcdfb.c
index 355b6120dc4f..1fc8de4ecbeb 100644
--- a/drivers/video/fbdev/atmel_lcdfb.c
+++ b/drivers/video/fbdev/atmel_lcdfb.c
@@ -1062,15 +1062,16 @@ static int __init atmel_lcdfb_probe(struct platform_device *pdev)
INIT_LIST_HEAD(&info->modelist);
- if (pdev->dev.of_node) {
- ret = atmel_lcdfb_of_init(sinfo);
- if (ret)
- goto free_info;
- } else {
+ if (!pdev->dev.of_node) {
dev_err(dev, "cannot get default configuration\n");
goto free_info;
}
+ ret = atmel_lcdfb_of_init(sinfo);
+ if (ret)
+ goto free_info;
+
+ ret = -ENODEV;
if (!sinfo->config)
goto free_info;
--
2.34.1
From: Liu Ying <[email protected]>
[ Upstream commit 3153fa38e38af566cf6454a03b1dbadaf6f323c0 ]
According to the comment of the function phy_mipi_dphy_get_default_config(),
it uses minimum D-PHY timings based on MIPI D-PHY specification. They are
derived from the valid ranges specified in Section 6.9, Table 14, Page 41
of the D-PHY specification (v1.2). The table 14 explicitly mentions that
the minimum T-LPX parameter is 50 nanoseconds and the minimum TA-SURE
parameter is T-LPX nanoseconds. Likewise, the kernel doc of the 'lpx' and
'ta_sure' members of struct phy_configure_opts_mipi_dphy mentions that
the minimum values are 50000 picoseconds and @lpx picoseconds respectively.
Also, the function phy_mipi_dphy_config_validate() checks if cfg->lpx is
less than 50000 picoseconds and if cfg->ta_sure is less than cfg->lpx,
which hints the same minimum values.
Without this patch, the function phy_mipi_dphy_get_default_config()
wrongly sets cfg->lpx to 60000 picoseconds and cfg->ta_sure to 2 * cfg->lpx.
So, let's correct them to 50000 picoseconds and cfg->lpx respectively.
Note that I've only tested the patch with RM67191 DSI panel on i.MX8mq EVK.
Help is needed to test with other i.MX8mq, Meson and Rockchip platforms,
as I don't have the hardwares.
Fixes: dddc97e82303 ("phy: dphy: Add configuration helpers")
Cc: Andrzej Hajda <[email protected]>
Cc: Neil Armstrong <[email protected]>
Cc: Laurent Pinchart <[email protected]>
Cc: Kishon Vijay Abraham I <[email protected]>
Cc: Vinod Koul <[email protected]>
Cc: Heiko Stuebner <[email protected]>
Cc: Maxime Ripard <[email protected]>
Cc: Guido Günther <[email protected]>
Signed-off-by: Liu Ying <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/phy/phy-core-mipi-dphy.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/phy/phy-core-mipi-dphy.c b/drivers/phy/phy-core-mipi-dphy.c
index 14e0551cd319..0aa740b73d0d 100644
--- a/drivers/phy/phy-core-mipi-dphy.c
+++ b/drivers/phy/phy-core-mipi-dphy.c
@@ -66,10 +66,10 @@ int phy_mipi_dphy_get_default_config(unsigned long pixel_clock,
cfg->hs_trail = max(4 * 8 * ui, 60000 + 4 * 4 * ui);
cfg->init = 100;
- cfg->lpx = 60000;
+ cfg->lpx = 50000;
cfg->ta_get = 5 * cfg->lpx;
cfg->ta_go = 4 * cfg->lpx;
- cfg->ta_sure = 2 * cfg->lpx;
+ cfg->ta_sure = cfg->lpx;
cfg->wakeup = 1000;
cfg->hs_clk_rate = hs_clk_rate;
--
2.34.1
From: Anssi Hannula <[email protected]>
commit 05519b8589a679edb8fa781259893d20bece04ad upstream.
xhci_decode_ctrl_ctx() returns the untouched buffer as-is if both "drop"
and "add" parameters are zero.
Fix the function to return an empty string in that case.
It was not immediately clear from the possible call chains whether this
issue is currently actually triggerable or not.
Note that before commit 4843b4b5ec64 ("xhci: fix even more unsafe memory
usage in xhci tracing") the result effect in the failure case was different
as a static buffer was used here, but the code still worked incorrectly.
Fixes: 90d6d5731da7 ("xhci: Add tracing for input control context")
Cc: [email protected]
Signed-off-by: Anssi Hannula <[email protected]>
Signed-off-by: Mathias Nyman <[email protected]>
commit 4843b4b5ec64 ("xhci: fix even more unsafe memory usage in xhci tracing")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/host/xhci.h | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -2458,6 +2458,8 @@ static inline const char *xhci_decode_ct
unsigned int bit;
int ret = 0;
+ str[0] = '\0';
+
if (drop) {
ret = sprintf(str, "Drop:");
for_each_set_bit(bit, &drop, 32)
From: Jing Yao <[email protected]>
[ Upstream commit 81a998288956d09d7a7a2303d47e4d60ad55c401 ]
Use sysfs_emit instead of scnprintf, snprintf or sprintf.
Reported-by: Zeal Robot <[email protected]>
Signed-off-by: Jing Yao <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/video/fbdev/udlfb.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/video/fbdev/udlfb.c b/drivers/video/fbdev/udlfb.c
index b9cdd02c1000..90f48b71fd8f 100644
--- a/drivers/video/fbdev/udlfb.c
+++ b/drivers/video/fbdev/udlfb.c
@@ -1426,7 +1426,7 @@ static ssize_t metrics_bytes_rendered_show(struct device *fbdev,
struct device_attribute *a, char *buf) {
struct fb_info *fb_info = dev_get_drvdata(fbdev);
struct dlfb_data *dlfb = fb_info->par;
- return snprintf(buf, PAGE_SIZE, "%u\n",
+ return sysfs_emit(buf, "%u\n",
atomic_read(&dlfb->bytes_rendered));
}
@@ -1434,7 +1434,7 @@ static ssize_t metrics_bytes_identical_show(struct device *fbdev,
struct device_attribute *a, char *buf) {
struct fb_info *fb_info = dev_get_drvdata(fbdev);
struct dlfb_data *dlfb = fb_info->par;
- return snprintf(buf, PAGE_SIZE, "%u\n",
+ return sysfs_emit(buf, "%u\n",
atomic_read(&dlfb->bytes_identical));
}
@@ -1442,7 +1442,7 @@ static ssize_t metrics_bytes_sent_show(struct device *fbdev,
struct device_attribute *a, char *buf) {
struct fb_info *fb_info = dev_get_drvdata(fbdev);
struct dlfb_data *dlfb = fb_info->par;
- return snprintf(buf, PAGE_SIZE, "%u\n",
+ return sysfs_emit(buf, "%u\n",
atomic_read(&dlfb->bytes_sent));
}
@@ -1450,7 +1450,7 @@ static ssize_t metrics_cpu_kcycles_used_show(struct device *fbdev,
struct device_attribute *a, char *buf) {
struct fb_info *fb_info = dev_get_drvdata(fbdev);
struct dlfb_data *dlfb = fb_info->par;
- return snprintf(buf, PAGE_SIZE, "%u\n",
+ return sysfs_emit(buf, "%u\n",
atomic_read(&dlfb->cpu_kcycles_used));
}
--
2.34.1
From: Arınç ÜNAL <[email protected]>
[ Upstream commit 5bc148649cf358d0cccf525452a4efbd4bc89a0f ]
Fix the GB-PC2 devicetree. Refer to the schematics of the device for more
information.
GB-PC2 devicetree fixes:
- Include mt7621.dtsi instead of gbpc1.dts. Add the missing definitions.
- Remove gpio-leds node as the system LED is not wired to anywhere on
the board and the power LED is directly wired to GND.
- Remove uart3 pin group from gpio-pinmux node as it's not used as GPIO.
- Use reg 7 for the external phy to be on par with
Documentation/devicetree/bindings/net/dsa/mt7530.txt.
- Use the status value "okay".
Link: https://github.com/ngiger/GnuBee_Docs/blob/master/GB-PCx/Documents/GB-PC2_V1.1_schematic.pdf
Reviewed-by: Sergio Paracuellos <[email protected]>
Signed-off-by: Arınç ÜNAL <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/staging/mt7621-dts/gbpc2.dts | 110 +++++++++++++++++++++++++--
1 file changed, 102 insertions(+), 8 deletions(-)
diff --git a/drivers/staging/mt7621-dts/gbpc2.dts b/drivers/staging/mt7621-dts/gbpc2.dts
index f9b69091bfc0..6f6fed071dda 100644
--- a/drivers/staging/mt7621-dts/gbpc2.dts
+++ b/drivers/staging/mt7621-dts/gbpc2.dts
@@ -1,27 +1,121 @@
/dts-v1/;
-#include "gbpc1.dts"
+#include "mt7621.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
/ {
compatible = "gnubee,gb-pc2", "mediatek,mt7621-soc";
model = "GB-PC2";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x00000000 0x1c000000>,
+ <0x20000000 0x04000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,57600";
+ };
+
+ palmbus: palmbus@1e000000 {
+ i2c@900 {
+ status = "okay";
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
};
-&default_gpio {
- groups = "wdt", "uart3";
- function = "gpio";
+&sdhci {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+ broken-flash-reset;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x1fb0000>;
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pinctrl {
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: state-default {
+ gpio-pinmux {
+ groups = "wdt";
+ function = "gpio";
+ };
+ };
};
ðernet {
gmac1: mac@1 {
- status = "ok";
- phy-handle = <&phy_external>;
+ status = "okay";
+ phy-handle = <ðphy7>;
};
mdio-bus {
- phy_external: ethernet-phy@5 {
- reg = <5>;
+ ethphy7: ethernet-phy@7 {
+ reg = <7>;
phy-mode = "rgmii-rxid";
};
};
};
+
+&switch0 {
+ ports {
+ port@0 {
+ status = "okay";
+ label = "ethblack";
+ };
+
+ port@4 {
+ status = "okay";
+ label = "ethblue";
+ };
+ };
+};
--
2.34.1
From: Bharata B Rao <[email protected]>
[ Upstream commit 28c988c3ec29db74a1dda631b18785958d57df4f ]
The older format of /proc/pid/sched printed home node info which
required the mempolicy and task lock around mpol_get(). However
the format has changed since then and there is no need for
sched_show_numa() any more to have mempolicy argument,
asssociated mpol_get/put and task_lock/unlock. Remove them.
Fixes: 397f2378f1361 ("sched/numa: Fix numa balancing stats in /proc/pid/sched")
Signed-off-by: Bharata B Rao <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Srikar Dronamraju <[email protected]>
Acked-by: Mel Gorman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/sched/debug.c | 10 ----------
1 file changed, 10 deletions(-)
diff --git a/kernel/sched/debug.c b/kernel/sched/debug.c
index 70a578272436..e7df4f293587 100644
--- a/kernel/sched/debug.c
+++ b/kernel/sched/debug.c
@@ -908,25 +908,15 @@ void print_numa_stats(struct seq_file *m, int node, unsigned long tsf,
static void sched_show_numa(struct task_struct *p, struct seq_file *m)
{
#ifdef CONFIG_NUMA_BALANCING
- struct mempolicy *pol;
-
if (p->mm)
P(mm->numa_scan_seq);
- task_lock(p);
- pol = p->mempolicy;
- if (pol && !(pol->flags & MPOL_F_MORON))
- pol = NULL;
- mpol_get(pol);
- task_unlock(p);
-
P(numa_pages_migrated);
P(numa_preferred_nid);
P(total_numa_faults);
SEQ_printf(m, "current_node=%d, numa_group_id=%d\n",
task_node(p), task_numa_group_id(p));
show_numa_stats(p, m);
- mpol_put(pol);
#endif
}
--
2.34.1
From: David Howells <[email protected]>
[ Upstream commit a635415a064e77bcfbf43da413fd9dfe0bbed9cb ]
In watch_queue_set_size(), the error cleanup code doesn't take account of
the fact that __free_page() can't handle a NULL pointer when trying to free
up buffer pages that did get allocated.
Fix this by only calling __free_page() on the pages actually allocated.
Without the fix, this can lead to something like the following:
BUG: KASAN: null-ptr-deref in __free_pages+0x1f/0x1b0 mm/page_alloc.c:5473
Read of size 4 at addr 0000000000000034 by task syz-executor168/3599
...
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
__kasan_report mm/kasan/report.c:446 [inline]
kasan_report.cold+0x66/0xdf mm/kasan/report.c:459
check_region_inline mm/kasan/generic.c:183 [inline]
kasan_check_range+0x13d/0x180 mm/kasan/generic.c:189
instrument_atomic_read include/linux/instrumented.h:71 [inline]
atomic_read include/linux/atomic/atomic-instrumented.h:27 [inline]
page_ref_count include/linux/page_ref.h:67 [inline]
put_page_testzero include/linux/mm.h:717 [inline]
__free_pages+0x1f/0x1b0 mm/page_alloc.c:5473
watch_queue_set_size+0x499/0x630 kernel/watch_queue.c:275
pipe_ioctl+0xac/0x2b0 fs/pipe.c:632
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:874 [inline]
__se_sys_ioctl fs/ioctl.c:860 [inline]
__x64_sys_ioctl+0x193/0x200 fs/ioctl.c:860
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
Fixes: c73be61cede5 ("pipe: Add general notification queue support")
Reported-and-tested-by: [email protected]
Signed-off-by: David Howells <[email protected]>
Reviewed-by: Fabio M. De Francesco <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/watch_queue.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/kernel/watch_queue.c b/kernel/watch_queue.c
index e3f144d96026..45a8eb90e5fc 100644
--- a/kernel/watch_queue.c
+++ b/kernel/watch_queue.c
@@ -274,7 +274,7 @@ long watch_queue_set_size(struct pipe_inode_info *pipe, unsigned int nr_notes)
return 0;
error_p:
- for (i = 0; i < nr_pages; i++)
+ while (--i >= 0)
__free_page(pages[i]);
kfree(pages);
error:
--
2.34.1
From: Lina Wang <[email protected]>
[ Upstream commit 4ff2980b6bd2aa6b4ded3ce3b7c0ccfab29980af ]
in tunnel mode, if outer interface(ipv4) is less, it is easily to let
inner IPV6 mtu be less than 1280. If so, a Packet Too Big ICMPV6 message
is received. When send again, packets are fragmentized with 1280, they
are still rejected with ICMPV6(Packet Too Big) by xfrmi_xmit2().
According to RFC4213 Section3.2.2:
if (IPv4 path MTU - 20) is less than 1280
if packet is larger than 1280 bytes
Send ICMPv6 "packet too big" with MTU=1280
Drop packet
else
Encapsulate but do not set the Don't Fragment
flag in the IPv4 header. The resulting IPv4
packet might be fragmented by the IPv4 layer
on the encapsulator or by some router along
the IPv4 path.
endif
else
if packet is larger than (IPv4 path MTU - 20)
Send ICMPv6 "packet too big" with
MTU = (IPv4 path MTU - 20).
Drop packet.
else
Encapsulate and set the Don't Fragment flag
in the IPv4 header.
endif
endif
Packets should be fragmentized with ipv4 outer interface, so change it.
After it is fragemtized with ipv4, there will be double fragmenation.
No.48 & No.51 are ipv6 fragment packets, No.48 is double fragmentized,
then tunneled with IPv4(No.49& No.50), which obey spec. And received peer
cannot decrypt it rightly.
48 2002::10 2002::11 1296(length) IPv6 fragment (off=0 more=y ident=0xa20da5bc nxt=50)
49 0x0000 (0) 2002::10 2002::11 1304 IPv6 fragment (off=0 more=y ident=0x7448042c nxt=44)
50 0x0000 (0) 2002::10 2002::11 200 ESP (SPI=0x00035000)
51 2002::10 2002::11 180 Echo (ping) request
52 0x56dc 2002::10 2002::11 248 IPv6 fragment (off=1232 more=n ident=0xa20da5bc nxt=50)
xfrm6_noneed_fragment has fixed above issues. Finally, it acted like below:
1 0x6206 192.168.1.138 192.168.1.1 1316 Fragmented IP protocol (proto=Encap Security Payload 50, off=0, ID=6206) [Reassembled in #2]
2 0x6206 2002::10 2002::11 88 IPv6 fragment (off=0 more=y ident=0x1f440778 nxt=50)
3 0x0000 2002::10 2002::11 248 ICMPv6 Echo (ping) request
Signed-off-by: Lina Wang <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/ipv6/xfrm6_output.c | 16 ++++++++++++++++
net/xfrm/xfrm_interface.c | 5 ++++-
2 files changed, 20 insertions(+), 1 deletion(-)
diff --git a/net/ipv6/xfrm6_output.c b/net/ipv6/xfrm6_output.c
index 6abb45a67199..ee349c243878 100644
--- a/net/ipv6/xfrm6_output.c
+++ b/net/ipv6/xfrm6_output.c
@@ -52,6 +52,19 @@ static int __xfrm6_output_finish(struct net *net, struct sock *sk, struct sk_buf
return xfrm_output(sk, skb);
}
+static int xfrm6_noneed_fragment(struct sk_buff *skb)
+{
+ struct frag_hdr *fh;
+ u8 prevhdr = ipv6_hdr(skb)->nexthdr;
+
+ if (prevhdr != NEXTHDR_FRAGMENT)
+ return 0;
+ fh = (struct frag_hdr *)(skb->data + sizeof(struct ipv6hdr));
+ if (fh->nexthdr == NEXTHDR_ESP || fh->nexthdr == NEXTHDR_AUTH)
+ return 1;
+ return 0;
+}
+
static int __xfrm6_output(struct net *net, struct sock *sk, struct sk_buff *skb)
{
struct dst_entry *dst = skb_dst(skb);
@@ -80,6 +93,9 @@ static int __xfrm6_output(struct net *net, struct sock *sk, struct sk_buff *skb)
xfrm6_local_rxpmtu(skb, mtu);
kfree_skb(skb);
return -EMSGSIZE;
+ } else if (toobig && xfrm6_noneed_fragment(skb)) {
+ skb->ignore_df = 1;
+ goto skip_frag;
} else if (!skb->ignore_df && toobig && skb->sk) {
xfrm_local_error(skb, mtu);
kfree_skb(skb);
diff --git a/net/xfrm/xfrm_interface.c b/net/xfrm/xfrm_interface.c
index 4420c8fd318a..da518b4ca84c 100644
--- a/net/xfrm/xfrm_interface.c
+++ b/net/xfrm/xfrm_interface.c
@@ -303,7 +303,10 @@ xfrmi_xmit2(struct sk_buff *skb, struct net_device *dev, struct flowi *fl)
if (mtu < IPV6_MIN_MTU)
mtu = IPV6_MIN_MTU;
- icmpv6_ndo_send(skb, ICMPV6_PKT_TOOBIG, 0, mtu);
+ if (skb->len > 1280)
+ icmpv6_ndo_send(skb, ICMPV6_PKT_TOOBIG, 0, mtu);
+ else
+ goto xmit;
} else {
if (!(ip_hdr(skb)->frag_off & htons(IP_DF)))
goto xmit;
--
2.34.1
From: Miaoqian Lin <[email protected]>
[ Upstream commit 375a347da4889f64d86e1ab7f4e6702b6e9bf299 ]
Fix the missing clk_disable_unprepare() before return
from msm8916_wcd_digital_probe in the error handling case.
Fixes: 150db8c5afa1 ("ASoC: codecs: Add msm8916-wcd digital codec")
Signed-off-by: Miaoqian Lin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/codecs/msm8916-wcd-digital.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/sound/soc/codecs/msm8916-wcd-digital.c b/sound/soc/codecs/msm8916-wcd-digital.c
index fcc10c8bc625..9ad7fc0baf07 100644
--- a/sound/soc/codecs/msm8916-wcd-digital.c
+++ b/sound/soc/codecs/msm8916-wcd-digital.c
@@ -1201,7 +1201,7 @@ static int msm8916_wcd_digital_probe(struct platform_device *pdev)
ret = clk_prepare_enable(priv->mclk);
if (ret < 0) {
dev_err(dev, "failed to enable mclk %d\n", ret);
- return ret;
+ goto err_clk;
}
dev_set_drvdata(dev, priv);
@@ -1209,6 +1209,9 @@ static int msm8916_wcd_digital_probe(struct platform_device *pdev)
return devm_snd_soc_register_component(dev, &msm8916_wcd_digital,
msm8916_wcd_digital_dai,
ARRAY_SIZE(msm8916_wcd_digital_dai));
+err_clk:
+ clk_disable_unprepare(priv->ahbclk);
+ return ret;
}
static int msm8916_wcd_digital_remove(struct platform_device *pdev)
--
2.34.1
From: Max Filippov <[email protected]>
commit f406f2d03e07afc199dd8cf501f361dde6be8a69 upstream.
patch_text must invoke patch_text_stop_machine on all online CPUs, but
it calls stop_machine_cpuslocked with NULL cpumask. As a result only one
CPU runs patch_text_stop_machine potentially leaving stale icache
entries on other CPUs. Fix that by calling stop_machine_cpuslocked with
cpu_online_mask as the last argument.
Cc: [email protected]
Fixes: 64711f9a47d4 ("xtensa: implement jump_label support")
Signed-off-by: Max Filippov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/xtensa/kernel/jump_label.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/xtensa/kernel/jump_label.c
+++ b/arch/xtensa/kernel/jump_label.c
@@ -61,7 +61,7 @@ static void patch_text(unsigned long add
.data = data,
};
stop_machine_cpuslocked(patch_text_stop_machine,
- &patch, NULL);
+ &patch, cpu_online_mask);
} else {
unsigned long flags;
From: Haimin Zhang <[email protected]>
[ Upstream commit 9a564bccb78a76740ea9d75a259942df8143d02c ]
Add __GFP_ZERO flag for compose_sadb_supported in function pfkey_register
to initialize the buffer of supp_skb to fix a kernel-info-leak issue.
1) Function pfkey_register calls compose_sadb_supported to request
a sk_buff. 2) compose_sadb_supported calls alloc_sbk to allocate
a sk_buff, but it doesn't zero it. 3) If auth_len is greater 0, then
compose_sadb_supported treats the memory as a struct sadb_supported and
begins to initialize. But it just initializes the field sadb_supported_len
and field sadb_supported_exttype without field sadb_supported_reserved.
Reported-by: TCS Robot <[email protected]>
Signed-off-by: Haimin Zhang <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/key/af_key.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/key/af_key.c b/net/key/af_key.c
index d1364b858fdf..bd9b5c573b5a 100644
--- a/net/key/af_key.c
+++ b/net/key/af_key.c
@@ -1703,7 +1703,7 @@ static int pfkey_register(struct sock *sk, struct sk_buff *skb, const struct sad
xfrm_probe_algs();
- supp_skb = compose_sadb_supported(hdr, GFP_KERNEL);
+ supp_skb = compose_sadb_supported(hdr, GFP_KERNEL | __GFP_ZERO);
if (!supp_skb) {
if (hdr->sadb_msg_satype != SADB_SATYPE_UNSPEC)
pfk->registered &= ~(1<<hdr->sadb_msg_satype);
--
2.34.1
From: Claudiu Beznea <[email protected]>
[ Upstream commit a223ea9f89ab960eb254ba78429efd42eaf845eb ]
Call atmel_trng_disable() on failure path of probe.
Fixes: a1fa98d8116f ("hwrng: atmel - disable TRNG during suspend")
Signed-off-by: Claudiu Beznea <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/char/hw_random/atmel-rng.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/char/hw_random/atmel-rng.c b/drivers/char/hw_random/atmel-rng.c
index ecb71c4317a5..8cf0ef501341 100644
--- a/drivers/char/hw_random/atmel-rng.c
+++ b/drivers/char/hw_random/atmel-rng.c
@@ -114,6 +114,7 @@ static int atmel_trng_probe(struct platform_device *pdev)
err_register:
clk_disable_unprepare(trng->clk);
+ atmel_trng_disable(trng);
return ret;
}
--
2.34.1
From: Bagas Sanjaya <[email protected]>
commit 555d44932c67e617d89bc13c81c7efac5b51fcfa upstream.
The link to stable tree is redirected to
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git. Update
accordingly.
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Sasha Levin <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Bagas Sanjaya <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
Documentation/process/stable-kernel-rules.rst | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/Documentation/process/stable-kernel-rules.rst
+++ b/Documentation/process/stable-kernel-rules.rst
@@ -168,7 +168,7 @@ Trees
- The finalized and tagged releases of all stable kernels can be found
in separate branches per version at:
- https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git
+ https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
- The release candidate of all stable kernel versions can be found at:
On 4/5/2022 12:24 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.110 release.
> There are 599 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 07 Apr 2022 07:01:33 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.110-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels:
Tested-by: Florian Fainelli <[email protected]>
--
Florian
From: Rik van Riel <[email protected]>
commit 3149c79f3cb0e2e3bafb7cfadacec090cbd250d3 upstream.
In some cases it appears the invalidation of a hwpoisoned page fails
because the page is still mapped in another process. This can cause a
program to be continuously restarted and die when it page faults on the
page that was not invalidated. Avoid that problem by unmapping the
hwpoisoned page when we find it.
Another issue is that sometimes we end up oopsing in finish_fault, if
the code tries to do something with the now-NULL vmf->page. I did not
hit this error when submitting the previous patch because there are
several opportunities for alloc_set_pte to bail out before accessing
vmf->page, and that apparently happened on those systems, and most of
the time on other systems, too.
However, across several million systems that error does occur a handful
of times a day. It can be avoided by returning VM_FAULT_NOPAGE which
will cause do_read_fault to return before calling finish_fault.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: e53ac7374e64 ("mm: invalidate hwpoison page cache page in fault path")
Signed-off-by: Rik van Riel <[email protected]>
Reviewed-by: Miaohe Lin <[email protected]>
Tested-by: Naoya Horiguchi <[email protected]>
Reviewed-by: Oscar Salvador <[email protected]>
Cc: Mel Gorman <[email protected]>
Cc: Johannes Weiner <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/memory.c | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -3676,14 +3676,18 @@ static vm_fault_t __do_fault(struct vm_f
return ret;
if (unlikely(PageHWPoison(vmf->page))) {
+ struct page *page = vmf->page;
vm_fault_t poisonret = VM_FAULT_HWPOISON;
if (ret & VM_FAULT_LOCKED) {
+ if (page_mapped(page))
+ unmap_mapping_pages(page_mapping(page),
+ page->index, 1, false);
/* Retry if a clean page was removed from the cache. */
- if (invalidate_inode_page(vmf->page))
- poisonret = 0;
- unlock_page(vmf->page);
+ if (invalidate_inode_page(page))
+ poisonret = VM_FAULT_NOPAGE;
+ unlock_page(page);
}
- put_page(vmf->page);
+ put_page(page);
vmf->page = NULL;
return poisonret;
}
From: Juhyung Park <[email protected]>
commit 680af5b824a52faa819167628665804a14f0e0df upstream.
cnt should be passed to sb_has_quota_active() instead of type to check
active quota properly.
Moreover, when the type is -1, the compiler with enough inline knowledge
can discard sb_has_quota_active() check altogether, causing a NULL pointer
dereference at the following inode_lock(dqopt->files[cnt]):
[ 2.796010] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a0
[ 2.796024] Mem abort info:
[ 2.796025] ESR = 0x96000005
[ 2.796028] EC = 0x25: DABT (current EL), IL = 32 bits
[ 2.796029] SET = 0, FnV = 0
[ 2.796031] EA = 0, S1PTW = 0
[ 2.796032] Data abort info:
[ 2.796034] ISV = 0, ISS = 0x00000005
[ 2.796035] CM = 0, WnR = 0
[ 2.796046] user pgtable: 4k pages, 39-bit VAs, pgdp=00000003370d1000
[ 2.796048] [00000000000000a0] pgd=0000000000000000, pud=0000000000000000
[ 2.796051] Internal error: Oops: 96000005 [#1] PREEMPT SMP
[ 2.796056] CPU: 7 PID: 640 Comm: f2fs_ckpt-259:7 Tainted: G S 5.4.179-arter97-r8-64666-g2f16e087f9d8 #1
[ 2.796057] Hardware name: Qualcomm Technologies, Inc. Lahaina MTP lemonadep (DT)
[ 2.796059] pstate: 80c00005 (Nzcv daif +PAN +UAO)
[ 2.796065] pc : down_write+0x28/0x70
[ 2.796070] lr : f2fs_quota_sync+0x100/0x294
[ 2.796071] sp : ffffffa3f48ffc30
[ 2.796073] x29: ffffffa3f48ffc30 x28: 0000000000000000
[ 2.796075] x27: ffffffa3f6d718b8 x26: ffffffa415fe9d80
[ 2.796077] x25: ffffffa3f7290048 x24: 0000000000000001
[ 2.796078] x23: 0000000000000000 x22: ffffffa3f7290000
[ 2.796080] x21: ffffffa3f72904a0 x20: ffffffa3f7290110
[ 2.796081] x19: ffffffa3f77a9800 x18: ffffffc020aae038
[ 2.796083] x17: ffffffa40e38e040 x16: ffffffa40e38e6d0
[ 2.796085] x15: ffffffa40e38e6cc x14: ffffffa40e38e6d0
[ 2.796086] x13: 00000000000004f6 x12: 00162c44ff493000
[ 2.796088] x11: 0000000000000400 x10: ffffffa40e38c948
[ 2.796090] x9 : 0000000000000000 x8 : 00000000000000a0
[ 2.796091] x7 : 0000000000000000 x6 : 0000d1060f00002a
[ 2.796093] x5 : ffffffa3f48ff718 x4 : 000000000000000d
[ 2.796094] x3 : 00000000060c0000 x2 : 0000000000000001
[ 2.796096] x1 : 0000000000000000 x0 : 00000000000000a0
[ 2.796098] Call trace:
[ 2.796100] down_write+0x28/0x70
[ 2.796102] f2fs_quota_sync+0x100/0x294
[ 2.796104] block_operations+0x120/0x204
[ 2.796106] f2fs_write_checkpoint+0x11c/0x520
[ 2.796107] __checkpoint_and_complete_reqs+0x7c/0xd34
[ 2.796109] issue_checkpoint_thread+0x6c/0xb8
[ 2.796112] kthread+0x138/0x414
[ 2.796114] ret_from_fork+0x10/0x18
[ 2.796117] Code: aa0803e0 aa1f03e1 52800022 aa0103e9 (c8e97d02)
[ 2.796120] ---[ end trace 96e942e8eb6a0b53 ]---
[ 2.800116] Kernel panic - not syncing: Fatal exception
[ 2.800120] SMP: stopping secondary CPUs
Fixes: 9de71ede81e6 ("f2fs: quota: fix potential deadlock")
Cc: <[email protected]> # v5.15+
Signed-off-by: Juhyung Park <[email protected]>
Reviewed-by: Chao Yu <[email protected]>
Signed-off-by: Jaegeuk Kim <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/f2fs/super.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/fs/f2fs/super.c
+++ b/fs/f2fs/super.c
@@ -2278,7 +2278,7 @@ int f2fs_quota_sync(struct super_block *
struct f2fs_sb_info *sbi = F2FS_SB(sb);
struct quota_info *dqopt = sb_dqopt(sb);
int cnt;
- int ret;
+ int ret = 0;
/*
* Now when everything is written we can discard the pagecache so
@@ -2289,8 +2289,8 @@ int f2fs_quota_sync(struct super_block *
if (type != -1 && cnt != type)
continue;
- if (!sb_has_quota_active(sb, type))
- return 0;
+ if (!sb_has_quota_active(sb, cnt))
+ continue;
inode_lock(dqopt->files[cnt]);
From: Pavel Skripkin <[email protected]>
[ Upstream commit fde18c3bac3f964d8333ae53b304d8fee430502b ]
This reverts commit 2c98b8a3458df03abdc6945bbef67ef91d181938.
Reverted patch causes problems with Hauppauge WinTV dualHD as Maximilian
reported [1]. Since quick solution didn't come up let's just revert it
to make this device work with upstream kernels.
Link: https://lore.kernel.org/all/[email protected]/ [1]
Reported-by: Maximilian Böhm <[email protected]>
Tested-by: Maximilian Böhm <[email protected]>
Signed-off-by: Pavel Skripkin <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/usb/em28xx/em28xx-cards.c | 5 +----
1 file changed, 1 insertion(+), 4 deletions(-)
diff --git a/drivers/media/usb/em28xx/em28xx-cards.c b/drivers/media/usb/em28xx/em28xx-cards.c
index b6490f611687..26408a972b44 100644
--- a/drivers/media/usb/em28xx/em28xx-cards.c
+++ b/drivers/media/usb/em28xx/em28xx-cards.c
@@ -4095,11 +4095,8 @@ static void em28xx_usb_disconnect(struct usb_interface *intf)
em28xx_close_extension(dev);
- if (dev->dev_next) {
- em28xx_close_extension(dev->dev_next);
+ if (dev->dev_next)
em28xx_release_resources(dev->dev_next);
- }
-
em28xx_release_resources(dev);
if (dev->dev_next) {
--
2.34.1
From: Helge Deller <[email protected]>
commit bd771cf5c4254511cc4abb88f3dab3bd58bdf8e8 upstream.
Zheyu Ma reported this crash in the sm712fb driver when reading
three bytes from the framebuffer:
BUG: unable to handle page fault for address: ffffc90001ffffff
RIP: 0010:smtcfb_read+0x230/0x3e0
Call Trace:
vfs_read+0x198/0xa00
? do_sys_openat2+0x27d/0x350
? __fget_light+0x54/0x340
ksys_read+0xce/0x190
do_syscall_64+0x43/0x90
Fix it by removing the open-coded endianess fixup-code and
by moving the pointer post decrement out the fb_readl() function.
Reported-by: Zheyu Ma <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
Tested-by: Zheyu Ma <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/video/fbdev/sm712fb.c | 25 +++++++------------------
1 file changed, 7 insertions(+), 18 deletions(-)
--- a/drivers/video/fbdev/sm712fb.c
+++ b/drivers/video/fbdev/sm712fb.c
@@ -1047,7 +1047,7 @@ static ssize_t smtcfb_read(struct fb_inf
if (count + p > total_size)
count = total_size - p;
- buffer = kmalloc((count > PAGE_SIZE) ? PAGE_SIZE : count, GFP_KERNEL);
+ buffer = kmalloc(PAGE_SIZE, GFP_KERNEL);
if (!buffer)
return -ENOMEM;
@@ -1059,25 +1059,14 @@ static ssize_t smtcfb_read(struct fb_inf
while (count) {
c = (count > PAGE_SIZE) ? PAGE_SIZE : count;
dst = buffer;
- for (i = c >> 2; i--;) {
- *dst = fb_readl(src++);
- *dst = big_swap(*dst);
+ for (i = (c + 3) >> 2; i--;) {
+ u32 val;
+
+ val = fb_readl(src);
+ *dst = big_swap(val);
+ src++;
dst++;
}
- if (c & 3) {
- u8 *dst8 = (u8 *)dst;
- u8 __iomem *src8 = (u8 __iomem *)src;
-
- for (i = c & 3; i--;) {
- if (i & 1) {
- *dst8++ = fb_readb(++src8);
- } else {
- *dst8++ = fb_readb(--src8);
- src8 += 2;
- }
- }
- src = (u32 __iomem *)src8;
- }
if (copy_to_user(buf, buffer, c)) {
err = -EFAULT;
From: Hans Verkuil <[email protected]>
[ Upstream commit 25e94139218c0293b4375233c14f2256d7dcfaa8 ]
The VIDIOC_G_FBUF and related overlay ioctls no longer worked (-ENOTTY was
returned).
The root cause was the introduction of the caps field in ivtv-driver.h.
While loading the ivtvfb module would update the video_device device_caps
field with V4L2_CAP_VIDEO_OUTPUT_OVERLAY it would not update that caps
field, and that's what the overlay ioctls would look at.
It's a bad idea to keep information in two places, so drop the caps field
and only use vdev.device_caps.
Signed-off-by: Hans Verkuil <[email protected]>
Reported-by: Martin Dauskardt <[email protected]>
Fixes: 2161536516ed (media: media/pci: set device_caps in struct video_device)
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/pci/ivtv/ivtv-driver.h | 1 -
drivers/media/pci/ivtv/ivtv-ioctl.c | 10 +++++-----
drivers/media/pci/ivtv/ivtv-streams.c | 11 ++++-------
3 files changed, 9 insertions(+), 13 deletions(-)
diff --git a/drivers/media/pci/ivtv/ivtv-driver.h b/drivers/media/pci/ivtv/ivtv-driver.h
index e5efe525ad7b..00caf60ff989 100644
--- a/drivers/media/pci/ivtv/ivtv-driver.h
+++ b/drivers/media/pci/ivtv/ivtv-driver.h
@@ -332,7 +332,6 @@ struct ivtv_stream {
struct ivtv *itv; /* for ease of use */
const char *name; /* name of the stream */
int type; /* stream type */
- u32 caps; /* V4L2 capabilities */
struct v4l2_fh *fh; /* pointer to the streaming filehandle */
spinlock_t qlock; /* locks access to the queues */
diff --git a/drivers/media/pci/ivtv/ivtv-ioctl.c b/drivers/media/pci/ivtv/ivtv-ioctl.c
index 35dccb31174c..a9d69b253516 100644
--- a/drivers/media/pci/ivtv/ivtv-ioctl.c
+++ b/drivers/media/pci/ivtv/ivtv-ioctl.c
@@ -443,7 +443,7 @@ static int ivtv_g_fmt_vid_out_overlay(struct file *file, void *fh, struct v4l2_f
struct ivtv_stream *s = &itv->streams[fh2id(fh)->type];
struct v4l2_window *winfmt = &fmt->fmt.win;
- if (!(s->caps & V4L2_CAP_VIDEO_OUTPUT_OVERLAY))
+ if (!(s->vdev.device_caps & V4L2_CAP_VIDEO_OUTPUT_OVERLAY))
return -EINVAL;
if (!itv->osd_video_pbase)
return -EINVAL;
@@ -554,7 +554,7 @@ static int ivtv_try_fmt_vid_out_overlay(struct file *file, void *fh, struct v4l2
u32 chromakey = fmt->fmt.win.chromakey;
u8 global_alpha = fmt->fmt.win.global_alpha;
- if (!(s->caps & V4L2_CAP_VIDEO_OUTPUT_OVERLAY))
+ if (!(s->vdev.device_caps & V4L2_CAP_VIDEO_OUTPUT_OVERLAY))
return -EINVAL;
if (!itv->osd_video_pbase)
return -EINVAL;
@@ -1388,7 +1388,7 @@ static int ivtv_g_fbuf(struct file *file, void *fh, struct v4l2_framebuffer *fb)
0,
};
- if (!(s->caps & V4L2_CAP_VIDEO_OUTPUT_OVERLAY))
+ if (!(s->vdev.device_caps & V4L2_CAP_VIDEO_OUTPUT_OVERLAY))
return -ENOTTY;
if (!itv->osd_video_pbase)
return -ENOTTY;
@@ -1455,7 +1455,7 @@ static int ivtv_s_fbuf(struct file *file, void *fh, const struct v4l2_framebuffe
struct ivtv_stream *s = &itv->streams[fh2id(fh)->type];
struct yuv_playback_info *yi = &itv->yuv_info;
- if (!(s->caps & V4L2_CAP_VIDEO_OUTPUT_OVERLAY))
+ if (!(s->vdev.device_caps & V4L2_CAP_VIDEO_OUTPUT_OVERLAY))
return -ENOTTY;
if (!itv->osd_video_pbase)
return -ENOTTY;
@@ -1475,7 +1475,7 @@ static int ivtv_overlay(struct file *file, void *fh, unsigned int on)
struct ivtv *itv = id->itv;
struct ivtv_stream *s = &itv->streams[fh2id(fh)->type];
- if (!(s->caps & V4L2_CAP_VIDEO_OUTPUT_OVERLAY))
+ if (!(s->vdev.device_caps & V4L2_CAP_VIDEO_OUTPUT_OVERLAY))
return -ENOTTY;
if (!itv->osd_video_pbase)
return -ENOTTY;
diff --git a/drivers/media/pci/ivtv/ivtv-streams.c b/drivers/media/pci/ivtv/ivtv-streams.c
index f04ee84bab5f..f9de5d1605fe 100644
--- a/drivers/media/pci/ivtv/ivtv-streams.c
+++ b/drivers/media/pci/ivtv/ivtv-streams.c
@@ -176,7 +176,7 @@ static void ivtv_stream_init(struct ivtv *itv, int type)
s->itv = itv;
s->type = type;
s->name = ivtv_stream_info[type].name;
- s->caps = ivtv_stream_info[type].v4l2_caps;
+ s->vdev.device_caps = ivtv_stream_info[type].v4l2_caps;
if (ivtv_stream_info[type].pio)
s->dma = PCI_DMA_NONE;
@@ -299,12 +299,9 @@ static int ivtv_reg_dev(struct ivtv *itv, int type)
if (s_mpg->vdev.v4l2_dev)
num = s_mpg->vdev.num + ivtv_stream_info[type].num_offset;
}
- s->vdev.device_caps = s->caps;
- if (itv->osd_video_pbase) {
- itv->streams[IVTV_DEC_STREAM_TYPE_YUV].vdev.device_caps |=
- V4L2_CAP_VIDEO_OUTPUT_OVERLAY;
- itv->streams[IVTV_DEC_STREAM_TYPE_MPG].vdev.device_caps |=
- V4L2_CAP_VIDEO_OUTPUT_OVERLAY;
+ if (itv->osd_video_pbase && (type == IVTV_DEC_STREAM_TYPE_YUV ||
+ type == IVTV_DEC_STREAM_TYPE_MPG)) {
+ s->vdev.device_caps |= V4L2_CAP_VIDEO_OUTPUT_OVERLAY;
itv->v4l2_cap |= V4L2_CAP_VIDEO_OUTPUT_OVERLAY;
}
video_set_drvdata(&s->vdev, s);
--
2.34.1
From: Fangrui Song <[email protected]>
commit 60210a3d86dc57ce4a76a366e7841dda746a33f7 upstream.
On ELF, (NOLOAD) sets the section type to SHT_NOBITS[1]. It is conceptually
inappropriate for .plt, .got, and .got.plt sections which are always
SHT_PROGBITS.
In GNU ld, if PLT entries are needed, .plt will be SHT_PROGBITS anyway
and (NOLOAD) will be essentially ignored. In ld.lld, since
https://reviews.llvm.org/D118840 ("[ELF] Support (TYPE=<value>) to
customize the output section type"), ld.lld will report a `section type
mismatch` error (later changed to a warning). Just remove (NOLOAD) to
fix the warning.
[1] https://lld.llvm.org/ELF/linker_script.html As of today, "The
section should be marked as not loadable" on
https://sourceware.org/binutils/docs/ld/Output-Section-Type.html is
outdated for ELF.
Link: https://github.com/ClangBuiltLinux/linux/issues/1597
Fixes: ab1ef68e5401 ("RISC-V: Add sections of PLT and GOT for kernel module")
Reported-by: Nathan Chancellor <[email protected]>
Signed-off-by: Fangrui Song <[email protected]>
Signed-off-by: Palmer Dabbelt <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/riscv/include/asm/module.lds.h | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/arch/riscv/include/asm/module.lds.h
+++ b/arch/riscv/include/asm/module.lds.h
@@ -2,8 +2,8 @@
/* Copyright (C) 2017 Andes Technology Corporation */
#ifdef CONFIG_MODULE_SECTIONS
SECTIONS {
- .plt (NOLOAD) : { BYTE(0) }
- .got (NOLOAD) : { BYTE(0) }
- .got.plt (NOLOAD) : { BYTE(0) }
+ .plt : { BYTE(0) }
+ .got : { BYTE(0) }
+ .got.plt : { BYTE(0) }
}
#endif
From: Dmitry Baryshkov <[email protected]>
[ Upstream commit d5c5e78f217172e87d8fb2c3418dd8b58b4adfcb ]
Add missing calls to dpu_hw_dspp_destroy() to free resources allocated
for DSPP hardware blocks.
Fixes: e47616df008b ("drm/msm/dpu: add support for color processing blocks in dpu driver")
Signed-off-by: Dmitry Baryshkov <[email protected]>
Reviewed-by: Stephen Boyd <[email protected]>
Reviewed-by: Abhinav Kumar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Baryshkov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c
index 9b2b5044e8e0..74a13ccad34c 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c
@@ -34,6 +34,14 @@ int dpu_rm_destroy(struct dpu_rm *rm)
{
int i;
+ for (i = 0; i < ARRAY_SIZE(rm->dspp_blks); i++) {
+ struct dpu_hw_dspp *hw;
+
+ if (rm->dspp_blks[i]) {
+ hw = to_dpu_hw_dspp(rm->dspp_blks[i]);
+ dpu_hw_dspp_destroy(hw);
+ }
+ }
for (i = 0; i < ARRAY_SIZE(rm->pingpong_blks); i++) {
struct dpu_hw_pingpong *hw;
--
2.34.1
From: Claudiu Beznea <[email protected]>
[ Upstream commit e981bc74aefc6a177b50c16cfa7023599799cf74 ]
Add spi_device_id tables to avoid logs like "SPI driver ksz9477-switch
has no spi_device_id".
Signed-off-by: Claudiu Beznea <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/dsa/microchip/ksz8795_spi.c | 11 +++++++++++
drivers/net/dsa/microchip/ksz9477_spi.c | 12 ++++++++++++
2 files changed, 23 insertions(+)
diff --git a/drivers/net/dsa/microchip/ksz8795_spi.c b/drivers/net/dsa/microchip/ksz8795_spi.c
index 8b00f8e6c02f..5639c5c59e25 100644
--- a/drivers/net/dsa/microchip/ksz8795_spi.c
+++ b/drivers/net/dsa/microchip/ksz8795_spi.c
@@ -86,12 +86,23 @@ static const struct of_device_id ksz8795_dt_ids[] = {
};
MODULE_DEVICE_TABLE(of, ksz8795_dt_ids);
+static const struct spi_device_id ksz8795_spi_ids[] = {
+ { "ksz8765" },
+ { "ksz8794" },
+ { "ksz8795" },
+ { "ksz8863" },
+ { "ksz8873" },
+ { },
+};
+MODULE_DEVICE_TABLE(spi, ksz8795_spi_ids);
+
static struct spi_driver ksz8795_spi_driver = {
.driver = {
.name = "ksz8795-switch",
.owner = THIS_MODULE,
.of_match_table = of_match_ptr(ksz8795_dt_ids),
},
+ .id_table = ksz8795_spi_ids,
.probe = ksz8795_spi_probe,
.remove = ksz8795_spi_remove,
.shutdown = ksz8795_spi_shutdown,
diff --git a/drivers/net/dsa/microchip/ksz9477_spi.c b/drivers/net/dsa/microchip/ksz9477_spi.c
index 1142768969c2..9bda83d063e8 100644
--- a/drivers/net/dsa/microchip/ksz9477_spi.c
+++ b/drivers/net/dsa/microchip/ksz9477_spi.c
@@ -88,12 +88,24 @@ static const struct of_device_id ksz9477_dt_ids[] = {
};
MODULE_DEVICE_TABLE(of, ksz9477_dt_ids);
+static const struct spi_device_id ksz9477_spi_ids[] = {
+ { "ksz9477" },
+ { "ksz9897" },
+ { "ksz9893" },
+ { "ksz9563" },
+ { "ksz8563" },
+ { "ksz9567" },
+ { },
+};
+MODULE_DEVICE_TABLE(spi, ksz9477_spi_ids);
+
static struct spi_driver ksz9477_spi_driver = {
.driver = {
.name = "ksz9477-switch",
.owner = THIS_MODULE,
.of_match_table = of_match_ptr(ksz9477_dt_ids),
},
+ .id_table = ksz9477_spi_ids,
.probe = ksz9477_spi_probe,
.remove = ksz9477_spi_remove,
.shutdown = ksz9477_spi_shutdown,
--
2.34.1
From: Linus Torvalds <[email protected]>
[ Upstream commit 1c24a186398f59c80adb9a967486b65c1423a59d ]
This has always been the rule: fdtables have several bitmaps in them,
and as a result they have to be sized properly for bitmaps. We walk
those bitmaps in chunks of 'unsigned long' in serveral cases, but even
when we don't, we use the regular kernel bitops that are defined to work
on arrays of 'unsigned long', not on some byte array.
Now, the distinction between arrays of bytes and 'unsigned long'
normally only really ends up being noticeable on big-endian systems, but
Fedor Pchelkin and Alexey Khoroshilov reported that copy_fd_bitmaps()
could be called with an argument that wasn't even a multiple of
BITS_PER_BYTE. And then it fails to do the proper copy even on
little-endian machines.
The bug wasn't in copy_fd_bitmap(), but in sane_fdtable_size(), which
didn't actually sanitize the fdtable size sufficiently, and never made
sure it had the proper BITS_PER_LONG alignment.
That's partly because the alignment historically came not from having to
explicitly align things, but simply from previous fdtable sizes, and
from count_open_files(), which counts the file descriptors by walking
them one 'unsigned long' word at a time and thus naturally ends up doing
sizing in the proper 'chunks of unsigned long'.
But with the introduction of close_range(), we now have an external
source of "this is how many files we want to have", and so
sane_fdtable_size() needs to do a better job.
This also adds that explicit alignment to alloc_fdtable(), although
there it is mainly just for documentation at a source code level. The
arithmetic we do there to pick a reasonable fdtable size already aligns
the result sufficiently.
In fact,clang notices that the added ALIGN() in that function doesn't
actually do anything, and does not generate any extra code for it.
It turns out that gcc ends up confusing itself by combining a previous
constant-sized shift operation with the variable-sized shift operations
in roundup_pow_of_two(). And probably due to that doesn't notice that
the ALIGN() is a no-op. But that's a (tiny) gcc misfeature that doesn't
matter. Having the explicit alignment makes sense, and would actually
matter on a 128-bit architecture if we ever go there.
This also adds big comments above both functions about how fdtable sizes
have to have that BITS_PER_LONG alignment.
Fixes: 60997c3d45d9 ("close_range: add CLOSE_RANGE_UNSHARE")
Reported-by: Fedor Pchelkin <[email protected]>
Reported-by: Alexey Khoroshilov <[email protected]>
Link: https://lore.kernel.org/all/[email protected]/
Tested-and-acked-by: Christian Brauner <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/file.c | 30 ++++++++++++++++++++++++++++++
1 file changed, 30 insertions(+)
diff --git a/fs/file.c b/fs/file.c
index 79a76d04c7c3..a47a1edb9404 100644
--- a/fs/file.c
+++ b/fs/file.c
@@ -85,6 +85,21 @@ static void copy_fdtable(struct fdtable *nfdt, struct fdtable *ofdt)
copy_fd_bitmaps(nfdt, ofdt, ofdt->max_fds);
}
+/*
+ * Note how the fdtable bitmap allocations very much have to be a multiple of
+ * BITS_PER_LONG. This is not only because we walk those things in chunks of
+ * 'unsigned long' in some places, but simply because that is how the Linux
+ * kernel bitmaps are defined to work: they are not "bits in an array of bytes",
+ * they are very much "bits in an array of unsigned long".
+ *
+ * The ALIGN(nr, BITS_PER_LONG) here is for clarity: since we just multiplied
+ * by that "1024/sizeof(ptr)" before, we already know there are sufficient
+ * clear low bits. Clang seems to realize that, gcc ends up being confused.
+ *
+ * On a 128-bit machine, the ALIGN() would actually matter. In the meantime,
+ * let's consider it documentation (and maybe a test-case for gcc to improve
+ * its code generation ;)
+ */
static struct fdtable * alloc_fdtable(unsigned int nr)
{
struct fdtable *fdt;
@@ -100,6 +115,7 @@ static struct fdtable * alloc_fdtable(unsigned int nr)
nr /= (1024 / sizeof(struct file *));
nr = roundup_pow_of_two(nr + 1);
nr *= (1024 / sizeof(struct file *));
+ nr = ALIGN(nr, BITS_PER_LONG);
/*
* Note that this can drive nr *below* what we had passed if sysctl_nr_open
* had been set lower between the check in expand_files() and here. Deal
@@ -267,11 +283,25 @@ static unsigned int count_open_files(struct fdtable *fdt)
return i;
}
+/*
+ * Note that a sane fdtable size always has to be a multiple of
+ * BITS_PER_LONG, since we have bitmaps that are sized by this.
+ *
+ * 'max_fds' will normally already be properly aligned, but it
+ * turns out that in the close_range() -> __close_range() ->
+ * unshare_fd() -> dup_fd() -> sane_fdtable_size() we can end
+ * up having a 'max_fds' value that isn't already aligned.
+ *
+ * Rather than make close_range() have to worry about this,
+ * just make that BITS_PER_LONG alignment be part of a sane
+ * fdtable size. Becuase that's really what it is.
+ */
static unsigned int sane_fdtable_size(struct fdtable *fdt, unsigned int max_fds)
{
unsigned int count;
count = count_open_files(fdt);
+ max_fds = ALIGN(max_fds, BITS_PER_LONG);
if (max_fds < NR_OPEN_DEFAULT)
max_fds = NR_OPEN_DEFAULT;
return min(count, max_fds);
--
2.34.1
From: Richard Schleich <[email protected]>
[ Upstream commit 618682b350990f8f1bee718949c4b3858711eb58 ]
This patch fixes the kernel warning
"cacheinfo: Unable to detect cache hierarchy for CPU 0"
for the bcm2711 on newer kernel versions.
Signed-off-by: Richard Schleich <[email protected]>
Tested-by: Stefan Wahren <[email protected]>
[florian: Align and remove comments matching property values]
Signed-off-by: Florian Fainelli <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/bcm2711.dtsi | 50 ++++++++++++++++++++++++++++++++++
1 file changed, 50 insertions(+)
diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi
index e46a3f4ad350..b50229c3102f 100644
--- a/arch/arm/boot/dts/bcm2711.dtsi
+++ b/arch/arm/boot/dts/bcm2711.dtsi
@@ -433,12 +433,26 @@
#size-cells = <0>;
enable-method = "brcm,bcm2836-smp"; // for ARM 32-bit
+ /* Source for d/i-cache-line-size and d/i-cache-sets
+ * https://developer.arm.com/documentation/100095/0003
+ * /Level-1-Memory-System/About-the-L1-memory-system?lang=en
+ * Source for d/i-cache-size
+ * https://www.raspberrypi.com/documentation/computers
+ * /processors.html#bcm2711
+ */
cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a72";
reg = <0>;
enable-method = "spin-table";
cpu-release-addr = <0x0 0x000000d8>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+ i-cache-size = <0xc000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
+ next-level-cache = <&l2>;
};
cpu1: cpu@1 {
@@ -447,6 +461,13 @@
reg = <1>;
enable-method = "spin-table";
cpu-release-addr = <0x0 0x000000e0>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+ i-cache-size = <0xc000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
+ next-level-cache = <&l2>;
};
cpu2: cpu@2 {
@@ -455,6 +476,13 @@
reg = <2>;
enable-method = "spin-table";
cpu-release-addr = <0x0 0x000000e8>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+ i-cache-size = <0xc000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
+ next-level-cache = <&l2>;
};
cpu3: cpu@3 {
@@ -463,6 +491,28 @@
reg = <3>;
enable-method = "spin-table";
cpu-release-addr = <0x0 0x000000f0>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+ i-cache-size = <0xc000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
+ next-level-cache = <&l2>;
+ };
+
+ /* Source for d/i-cache-line-size and d/i-cache-sets
+ * https://developer.arm.com/documentation/100095/0003
+ * /Level-2-Memory-System/About-the-L2-memory-system?lang=en
+ * Source for d/i-cache-size
+ * https://www.raspberrypi.com/documentation/computers
+ * /processors.html#bcm2711
+ */
+ l2: l2-cache0 {
+ compatible = "cache";
+ cache-size = <0x100000>;
+ cache-line-size = <64>;
+ cache-sets = <1024>; // 1MiB(size)/64(line-size)=16384ways/16-way set
+ cache-level = <2>;
};
};
--
2.34.1
From: Aharon Landau <[email protected]>
[ Upstream commit 2f0e60d5e9f96341a0c8a01be8878cdb3b29ff20 ]
When an ODP MR cache entry is empty and trying to allocate it, increment
the ent->miss counter and call to queue_adjust_cache_locked() to verify
the entry is balanced.
Fixes: aad719dcf379 ("RDMA/mlx5: Allow MRs to be created in the cache synchronously")
Link: https://lore.kernel.org/r/09503e295276dcacc92cb1d8aef1ad0961c99dc1.1644947594.git.leonro@nvidia.com
Signed-off-by: Aharon Landau <[email protected]>
Signed-off-by: Leon Romanovsky <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/hw/mlx5/mr.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/infiniband/hw/mlx5/mr.c b/drivers/infiniband/hw/mlx5/mr.c
index 19346693c1da..6cd0cbd4fc9f 100644
--- a/drivers/infiniband/hw/mlx5/mr.c
+++ b/drivers/infiniband/hw/mlx5/mr.c
@@ -575,6 +575,8 @@ struct mlx5_ib_mr *mlx5_mr_cache_alloc(struct mlx5_ib_dev *dev,
ent = &cache->ent[entry];
spin_lock_irq(&ent->lock);
if (list_empty(&ent->head)) {
+ queue_adjust_cache_locked(ent);
+ ent->miss++;
spin_unlock_irq(&ent->lock);
mr = create_cache_mr(ent);
if (IS_ERR(mr))
--
2.34.1
From: Damien Le Moal <[email protected]>
[ Upstream commit 1a37b6738b58d86f6b144b3fc754ace0f2e0166d ]
Since the sata_cmd struct is zeroed out before its fields are initialized,
there is no need for using "|=" to initialize the ncqtag_atap_dir_m
field. Using a standard assignment removes the sparse warning:
warning: invalid assignment: |=
Also, since the ncqtag_atap_dir_m field has type __le32, use cpu_to_le32()
to generate the assigned value.
Link: https://lore.kernel.org/r/[email protected]
Fixes: c6b9ef5779c3 ("[SCSI] pm80xx: NCQ error handling changes")
Reviewed-by: John Garry <[email protected]>
Reviewed-by: Jack Wang <[email protected]>
Signed-off-by: Damien Le Moal <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/pm8001/pm8001_hwi.c | 2 +-
drivers/scsi/pm8001/pm80xx_hwi.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index 9b318958d78c..eb63f8c5a6f9 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -1804,7 +1804,7 @@ static void pm8001_send_read_log(struct pm8001_hba_info *pm8001_ha,
sata_cmd.tag = cpu_to_le32(ccb_tag);
sata_cmd.device_id = cpu_to_le32(pm8001_ha_dev->device_id);
- sata_cmd.ncqtag_atap_dir_m |= ((0x1 << 7) | (0x5 << 9));
+ sata_cmd.ncqtag_atap_dir_m = cpu_to_le32((0x1 << 7) | (0x5 << 9));
memcpy(&sata_cmd.sata_fis, &fis, sizeof(struct host_to_dev_fis));
res = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &sata_cmd,
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c
index 2a3ce4680734..9f0ce8668113 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.c
+++ b/drivers/scsi/pm8001/pm80xx_hwi.c
@@ -1830,7 +1830,7 @@ static void pm80xx_send_read_log(struct pm8001_hba_info *pm8001_ha,
sata_cmd.tag = cpu_to_le32(ccb_tag);
sata_cmd.device_id = cpu_to_le32(pm8001_ha_dev->device_id);
- sata_cmd.ncqtag_atap_dir_m_dad |= ((0x1 << 7) | (0x5 << 9));
+ sata_cmd.ncqtag_atap_dir_m_dad = cpu_to_le32(((0x1 << 7) | (0x5 << 9)));
memcpy(&sata_cmd.sata_fis, &fis, sizeof(struct host_to_dev_fis));
res = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &sata_cmd,
--
2.34.1
From: Evgeny Novikov <[email protected]>
[ Upstream commit 8738ddcac644964ae128ccd3d80d48773c8d528e ]
w100fb_probe() did not reset the global state to its initial state. This
can result in invocation of iounmap() even when there was not the
appropriate successful call of ioremap(). For instance, this may be the
case if first probe fails after two successful ioremap() while second
probe fails when first ioremap() fails. The similar issue is with
w100fb_remove(). The patch fixes both bugs.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Evgeny Novikov <[email protected]>
Co-developed-by: Kirill Shilimanov <[email protected]>
Signed-off-by: Kirill Shilimanov <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/video/fbdev/w100fb.c | 15 ++++++++++++---
1 file changed, 12 insertions(+), 3 deletions(-)
diff --git a/drivers/video/fbdev/w100fb.c b/drivers/video/fbdev/w100fb.c
index d96ab28f8ce4..4e641a780726 100644
--- a/drivers/video/fbdev/w100fb.c
+++ b/drivers/video/fbdev/w100fb.c
@@ -770,12 +770,18 @@ static int w100fb_probe(struct platform_device *pdev)
fb_dealloc_cmap(&info->cmap);
kfree(info->pseudo_palette);
}
- if (remapped_fbuf != NULL)
+ if (remapped_fbuf != NULL) {
iounmap(remapped_fbuf);
- if (remapped_regs != NULL)
+ remapped_fbuf = NULL;
+ }
+ if (remapped_regs != NULL) {
iounmap(remapped_regs);
- if (remapped_base != NULL)
+ remapped_regs = NULL;
+ }
+ if (remapped_base != NULL) {
iounmap(remapped_base);
+ remapped_base = NULL;
+ }
if (info)
framebuffer_release(info);
return err;
@@ -795,8 +801,11 @@ static int w100fb_remove(struct platform_device *pdev)
fb_dealloc_cmap(&info->cmap);
iounmap(remapped_base);
+ remapped_base = NULL;
iounmap(remapped_regs);
+ remapped_regs = NULL;
iounmap(remapped_fbuf);
+ remapped_fbuf = NULL;
framebuffer_release(info);
--
2.34.1
From: James Clark <[email protected]>
commit ea75a342aed5ed72c87f38fbe0df2f5df7eae374 upstream.
It's impossible to program a valid value for TRCCONFIGR.QE
when TRCIDR0.QSUPP==0b10. In that case the following is true:
Q element support is implemented, and only supports Q elements without
instruction counts. TRCCONFIGR.QE can only take the values 0b00 or 0b11.
Currently the low bit of QSUPP is checked to see if the low bit of QE can
be written to, but as you can see when QSUPP==0b10 the low bit is cleared
making it impossible to ever write the only valid value of 0b11 to QE.
0b10 would be written instead, which is a reserved QE value even for all
values of QSUPP.
The fix is to allow writing the low bit of QE for any non zero value of
QSUPP.
This change also ensures that the low bit is always set, even when the
user attempts to only set the high bit.
Signed-off-by: James Clark <[email protected]>
Reviewed-by: Mike Leach <[email protected]>
Fixes: d8c66962084f ("coresight-etm4x: Controls pertaining to the reset, mode, pe and events")
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mathieu Poirier <[email protected]>
Signed-off-by: Suzuki K Poulose <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/hwtracing/coresight/coresight-etm4x-sysfs.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
--- a/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c
+++ b/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c
@@ -364,8 +364,12 @@ static ssize_t mode_store(struct device
mode = ETM_MODE_QELEM(config->mode);
/* start by clearing QE bits */
config->cfg &= ~(BIT(13) | BIT(14));
- /* if supported, Q elements with instruction counts are enabled */
- if ((mode & BIT(0)) && (drvdata->q_support & BIT(0)))
+ /*
+ * if supported, Q elements with instruction counts are enabled.
+ * Always set the low bit for any requested mode. Valid combos are
+ * 0b00, 0b01 and 0b11.
+ */
+ if (mode && drvdata->q_support)
config->cfg |= BIT(13);
/*
* if supported, Q elements with and without instruction
From: Akira Kawata <[email protected]>
[ Upstream commit 0da1d5002745cdc721bc018b582a8a9704d56c42 ]
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=197921
As pointed out in the discussion of buglink, we cannot calculate AT_PHDR
as the sum of load_addr and exec->e_phoff.
: The AT_PHDR of ELF auxiliary vectors should point to the memory address
: of program header. But binfmt_elf.c calculates this address as follows:
:
: NEW_AUX_ENT(AT_PHDR, load_addr + exec->e_phoff);
:
: which is wrong since e_phoff is the file offset of program header and
: load_addr is the memory base address from PT_LOAD entry.
:
: The ld.so uses AT_PHDR as the memory address of program header. In normal
: case, since the e_phoff is usually 64 and in the first PT_LOAD region, it
: is the correct program header address.
:
: But if the address of program header isn't equal to the first PT_LOAD
: address + e_phoff (e.g. Put the program header in other non-consecutive
: PT_LOAD region), ld.so will try to read program header from wrong address
: then crash or use incorrect program header.
This is because exec->e_phoff
is the offset of PHDRs in the file and the address of PHDRs in the
memory may differ from it. This patch fixes the bug by calculating the
address of program headers from PT_LOADs directly.
Signed-off-by: Akira Kawata <[email protected]>
Reported-by: kernel test robot <[email protected]>
Acked-by: Kees Cook <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
fs/binfmt_elf.c | 24 ++++++++++++++++++------
1 file changed, 18 insertions(+), 6 deletions(-)
diff --git a/fs/binfmt_elf.c b/fs/binfmt_elf.c
index 04c4aa7a1df2..ed507d27034b 100644
--- a/fs/binfmt_elf.c
+++ b/fs/binfmt_elf.c
@@ -170,8 +170,8 @@ static int padzero(unsigned long elf_bss)
static int
create_elf_tables(struct linux_binprm *bprm, const struct elfhdr *exec,
- unsigned long load_addr, unsigned long interp_load_addr,
- unsigned long e_entry)
+ unsigned long interp_load_addr,
+ unsigned long e_entry, unsigned long phdr_addr)
{
struct mm_struct *mm = current->mm;
unsigned long p = bprm->p;
@@ -256,7 +256,7 @@ create_elf_tables(struct linux_binprm *bprm, const struct elfhdr *exec,
NEW_AUX_ENT(AT_HWCAP, ELF_HWCAP);
NEW_AUX_ENT(AT_PAGESZ, ELF_EXEC_PAGESIZE);
NEW_AUX_ENT(AT_CLKTCK, CLOCKS_PER_SEC);
- NEW_AUX_ENT(AT_PHDR, load_addr + exec->e_phoff);
+ NEW_AUX_ENT(AT_PHDR, phdr_addr);
NEW_AUX_ENT(AT_PHENT, sizeof(struct elf_phdr));
NEW_AUX_ENT(AT_PHNUM, exec->e_phnum);
NEW_AUX_ENT(AT_BASE, interp_load_addr);
@@ -820,7 +820,7 @@ static int parse_elf_properties(struct file *f, const struct elf_phdr *phdr,
static int load_elf_binary(struct linux_binprm *bprm)
{
struct file *interpreter = NULL; /* to shut gcc up */
- unsigned long load_addr = 0, load_bias = 0;
+ unsigned long load_addr, load_bias = 0, phdr_addr = 0;
int load_addr_set = 0;
unsigned long error;
struct elf_phdr *elf_ppnt, *elf_phdata, *interp_elf_phdata = NULL;
@@ -1153,6 +1153,17 @@ static int load_elf_binary(struct linux_binprm *bprm)
reloc_func_desc = load_bias;
}
}
+
+ /*
+ * Figure out which segment in the file contains the Program
+ * Header table, and map to the associated memory address.
+ */
+ if (elf_ppnt->p_offset <= elf_ex->e_phoff &&
+ elf_ex->e_phoff < elf_ppnt->p_offset + elf_ppnt->p_filesz) {
+ phdr_addr = elf_ex->e_phoff - elf_ppnt->p_offset +
+ elf_ppnt->p_vaddr;
+ }
+
k = elf_ppnt->p_vaddr;
if ((elf_ppnt->p_flags & PF_X) && k < start_code)
start_code = k;
@@ -1188,6 +1199,7 @@ static int load_elf_binary(struct linux_binprm *bprm)
}
e_entry = elf_ex->e_entry + load_bias;
+ phdr_addr += load_bias;
elf_bss += load_bias;
elf_brk += load_bias;
start_code += load_bias;
@@ -1251,8 +1263,8 @@ static int load_elf_binary(struct linux_binprm *bprm)
goto out;
#endif /* ARCH_HAS_SETUP_ADDITIONAL_PAGES */
- retval = create_elf_tables(bprm, elf_ex,
- load_addr, interp_load_addr, e_entry);
+ retval = create_elf_tables(bprm, elf_ex, interp_load_addr,
+ e_entry, phdr_addr);
if (retval < 0)
goto out;
--
2.34.1
From: Sean Nyekjaer <[email protected]>
commit 8cba323437a49a45756d661f500b324fc2d486fe upstream.
Prevent rawnand access while in a suspended state.
Commit 013e6292aaf5 ("mtd: rawnand: Simplify the locking") allows the
rawnand layer to return errors rather than waiting in a blocking wait.
Tested on a iMX6ULL.
Fixes: 013e6292aaf5 ("mtd: rawnand: Simplify the locking")
Signed-off-by: Sean Nyekjaer <[email protected]>
Reviewed-by: Boris Brezillon <[email protected]>
Cc: [email protected]
Signed-off-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mtd/nand/raw/nand_base.c | 44 +++++++++++++++++----------------------
include/linux/mtd/rawnand.h | 2 +
2 files changed, 22 insertions(+), 24 deletions(-)
--- a/drivers/mtd/nand/raw/nand_base.c
+++ b/drivers/mtd/nand/raw/nand_base.c
@@ -297,16 +297,19 @@ static int nand_isbad_bbm(struct nand_ch
*
* Return: -EBUSY if the chip has been suspended, 0 otherwise
*/
-static int nand_get_device(struct nand_chip *chip)
+static void nand_get_device(struct nand_chip *chip)
{
- mutex_lock(&chip->lock);
- if (chip->suspended) {
+ /* Wait until the device is resumed. */
+ while (1) {
+ mutex_lock(&chip->lock);
+ if (!chip->suspended) {
+ mutex_lock(&chip->controller->lock);
+ return;
+ }
mutex_unlock(&chip->lock);
- return -EBUSY;
- }
- mutex_lock(&chip->controller->lock);
- return 0;
+ wait_event(chip->resume_wq, !chip->suspended);
+ }
}
/**
@@ -531,9 +534,7 @@ static int nand_block_markbad_lowlevel(s
nand_erase_nand(chip, &einfo, 0);
/* Write bad block marker to OOB */
- ret = nand_get_device(chip);
- if (ret)
- return ret;
+ nand_get_device(chip);
ret = nand_markbad_bbm(chip, ofs);
nand_release_device(chip);
@@ -3534,9 +3535,7 @@ static int nand_read_oob(struct mtd_info
ops->mode != MTD_OPS_RAW)
return -ENOTSUPP;
- ret = nand_get_device(chip);
- if (ret)
- return ret;
+ nand_get_device(chip);
if (!ops->datbuf)
ret = nand_do_read_oob(chip, from, ops);
@@ -4119,13 +4118,11 @@ static int nand_write_oob(struct mtd_inf
struct mtd_oob_ops *ops)
{
struct nand_chip *chip = mtd_to_nand(mtd);
- int ret;
+ int ret = 0;
ops->retlen = 0;
- ret = nand_get_device(chip);
- if (ret)
- return ret;
+ nand_get_device(chip);
switch (ops->mode) {
case MTD_OPS_PLACE_OOB:
@@ -4181,9 +4178,7 @@ int nand_erase_nand(struct nand_chip *ch
return -EINVAL;
/* Grab the lock and see if the device is available */
- ret = nand_get_device(chip);
- if (ret)
- return ret;
+ nand_get_device(chip);
/* Shift to get first page */
page = (int)(instr->addr >> chip->page_shift);
@@ -4270,7 +4265,7 @@ static void nand_sync(struct mtd_info *m
pr_debug("%s: called\n", __func__);
/* Grab the lock and see if the device is available */
- WARN_ON(nand_get_device(chip));
+ nand_get_device(chip);
/* Release it and go back */
nand_release_device(chip);
}
@@ -4287,9 +4282,7 @@ static int nand_block_isbad(struct mtd_i
int ret;
/* Select the NAND device */
- ret = nand_get_device(chip);
- if (ret)
- return ret;
+ nand_get_device(chip);
nand_select_target(chip, chipnr);
@@ -4360,6 +4353,8 @@ static void nand_resume(struct mtd_info
__func__);
}
mutex_unlock(&chip->lock);
+
+ wake_up_all(&chip->resume_wq);
}
/**
@@ -5068,6 +5063,7 @@ static int nand_scan_ident(struct nand_c
chip->cur_cs = -1;
mutex_init(&chip->lock);
+ init_waitqueue_head(&chip->resume_wq);
/* Enforce the right timings for reset/detection */
chip->current_interface_config = nand_get_reset_interface_config();
--- a/include/linux/mtd/rawnand.h
+++ b/include/linux/mtd/rawnand.h
@@ -1083,6 +1083,7 @@ struct nand_manufacturer {
* @lock: Lock protecting the suspended field. Also used to serialize accesses
* to the NAND device
* @suspended: Set to 1 when the device is suspended, 0 when it's not
+ * @resume_wq: wait queue to sleep if rawnand is in suspended state.
* @cur_cs: Currently selected target. -1 means no target selected, otherwise we
* should always have cur_cs >= 0 && cur_cs < nanddev_ntargets().
* NAND Controller drivers should not modify this value, but they're
@@ -1135,6 +1136,7 @@ struct nand_chip {
/* Internals */
struct mutex lock;
unsigned int suspended : 1;
+ wait_queue_head_t resume_wq;
int cur_cs;
int read_retries;
From: Jason A. Donenfeld <[email protected]>
commit ec59f128a9bd4255798abb1e06ac3b442f46ef68 upstream.
We make too nuanced use of ptr_ring to entirely move to the skb_array
wrappers, but we at least should avoid the naughty function pointer cast
when cleaning up skbs. Otherwise RAP/CFI will honk at us. This patch
uses the __skb_array_destroy_skb wrapper for the cleanup, rather than
directly providing kfree_skb, which is what other drivers in the same
situation do too.
Reported-by: PaX Team <[email protected]>
Fixes: 886fcee939ad ("wireguard: receive: use ring buffer for incoming handshakes")
Signed-off-by: Jason A. Donenfeld <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireguard/queueing.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/net/wireguard/queueing.c
+++ b/drivers/net/wireguard/queueing.c
@@ -4,6 +4,7 @@
*/
#include "queueing.h"
+#include <linux/skb_array.h>
struct multicore_worker __percpu *
wg_packet_percpu_multicore_worker_alloc(work_func_t function, void *ptr)
@@ -42,7 +43,7 @@ void wg_packet_queue_free(struct crypt_q
{
free_percpu(queue->worker);
WARN_ON(!purge && !__ptr_ring_empty(&queue->ring));
- ptr_ring_cleanup(&queue->ring, purge ? (void(*)(void*))kfree_skb : NULL);
+ ptr_ring_cleanup(&queue->ring, purge ? __skb_array_destroy_skb : NULL);
}
#define NEXT(skb) ((skb)->prev)
From: Johan Hovold <[email protected]>
commit d42b3ad105b5d3481f6a56bc789aa2b27aa09325 upstream.
Make sure to disable runtime PM before returning on probe errors.
Fixes: 479f7a118105 ("[media] davinci: vpif: adaptions for DT support")
Cc: [email protected]
Cc: Kevin Hilman <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/platform/davinci/vpif.c | 11 +++++++++--
1 file changed, 9 insertions(+), 2 deletions(-)
--- a/drivers/media/platform/davinci/vpif.c
+++ b/drivers/media/platform/davinci/vpif.c
@@ -428,6 +428,7 @@ static int vpif_probe(struct platform_de
static struct resource *res, *res_irq;
struct platform_device *pdev_capture, *pdev_display;
struct device_node *endpoint = NULL;
+ int ret;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
vpif_base = devm_ioremap_resource(&pdev->dev, res);
@@ -458,8 +459,8 @@ static int vpif_probe(struct platform_de
res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
if (!res_irq) {
dev_warn(&pdev->dev, "Missing IRQ resource.\n");
- pm_runtime_put(&pdev->dev);
- return -EINVAL;
+ ret = -EINVAL;
+ goto err_put_rpm;
}
pdev_capture = devm_kzalloc(&pdev->dev, sizeof(*pdev_capture),
@@ -493,6 +494,12 @@ static int vpif_probe(struct platform_de
}
return 0;
+
+err_put_rpm:
+ pm_runtime_put(&pdev->dev);
+ pm_runtime_disable(&pdev->dev);
+
+ return ret;
}
static int vpif_remove(struct platform_device *pdev)
From: Arnd Bergmann <[email protected]>
commit 9d67412f24cc3a2c05f35f7c856addb07a2960ce upstream.
iop32x is one of the last platforms to use IRQ 0, and this has apparently
stopped working in a 2014 cleanup without anyone noticing. This interrupt
is used for the DMA engine, so most likely this has not actually worked
in the past 7 years, but it's also not essential for using this board.
I'm splitting out this change from my GENERIC_IRQ_MULTI_HANDLER
conversion so it can be backported if anyone cares.
Fixes: a71b092a9c68 ("ARM: Convert handle_IRQ to use __handle_domain_irq")
Signed-off-by: Arnd Bergmann <[email protected]>
[ardb: take +1 offset into account in mask/unmask and init as well]
Signed-off-by: Ard Biesheuvel <[email protected]>
Tested-by: Marc Zyngier <[email protected]>
Tested-by: Vladimir Murzin <[email protected]> # ARMv7M
Reviewed-by: Linus Walleij <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/mach-iop32x/include/mach/entry-macro.S | 2
arch/arm/mach-iop32x/include/mach/irqs.h | 2
arch/arm/mach-iop32x/irq.c | 6 +-
arch/arm/mach-iop32x/irqs.h | 60 ++++++++++++------------
4 files changed, 37 insertions(+), 33 deletions(-)
--- a/arch/arm/mach-iop32x/include/mach/entry-macro.S
+++ b/arch/arm/mach-iop32x/include/mach/entry-macro.S
@@ -20,7 +20,7 @@
mrc p6, 0, \irqstat, c8, c0, 0 @ Read IINTSRC
cmp \irqstat, #0
clzne \irqnr, \irqstat
- rsbne \irqnr, \irqnr, #31
+ rsbne \irqnr, \irqnr, #32
.endm
.macro arch_ret_to_user, tmp1, tmp2
--- a/arch/arm/mach-iop32x/include/mach/irqs.h
+++ b/arch/arm/mach-iop32x/include/mach/irqs.h
@@ -9,6 +9,6 @@
#ifndef __IRQS_H
#define __IRQS_H
-#define NR_IRQS 32
+#define NR_IRQS 33
#endif
--- a/arch/arm/mach-iop32x/irq.c
+++ b/arch/arm/mach-iop32x/irq.c
@@ -32,14 +32,14 @@ static void intstr_write(u32 val)
static void
iop32x_irq_mask(struct irq_data *d)
{
- iop32x_mask &= ~(1 << d->irq);
+ iop32x_mask &= ~(1 << (d->irq - 1));
intctl_write(iop32x_mask);
}
static void
iop32x_irq_unmask(struct irq_data *d)
{
- iop32x_mask |= 1 << d->irq;
+ iop32x_mask |= 1 << (d->irq - 1);
intctl_write(iop32x_mask);
}
@@ -65,7 +65,7 @@ void __init iop32x_init_irq(void)
machine_is_em7210())
*IOP3XX_PCIIRSR = 0x0f;
- for (i = 0; i < NR_IRQS; i++) {
+ for (i = 1; i < NR_IRQS; i++) {
irq_set_chip_and_handler(i, &ext_chip, handle_level_irq);
irq_clear_status_flags(i, IRQ_NOREQUEST | IRQ_NOPROBE);
}
--- a/arch/arm/mach-iop32x/irqs.h
+++ b/arch/arm/mach-iop32x/irqs.h
@@ -7,36 +7,40 @@
#ifndef __IOP32X_IRQS_H
#define __IOP32X_IRQS_H
+/* Interrupts in Linux start at 1, hardware starts at 0 */
+
+#define IOP_IRQ(x) ((x) + 1)
+
/*
* IOP80321 chipset interrupts
*/
-#define IRQ_IOP32X_DMA0_EOT 0
-#define IRQ_IOP32X_DMA0_EOC 1
-#define IRQ_IOP32X_DMA1_EOT 2
-#define IRQ_IOP32X_DMA1_EOC 3
-#define IRQ_IOP32X_AA_EOT 6
-#define IRQ_IOP32X_AA_EOC 7
-#define IRQ_IOP32X_CORE_PMON 8
-#define IRQ_IOP32X_TIMER0 9
-#define IRQ_IOP32X_TIMER1 10
-#define IRQ_IOP32X_I2C_0 11
-#define IRQ_IOP32X_I2C_1 12
-#define IRQ_IOP32X_MESSAGING 13
-#define IRQ_IOP32X_ATU_BIST 14
-#define IRQ_IOP32X_PERFMON 15
-#define IRQ_IOP32X_CORE_PMU 16
-#define IRQ_IOP32X_BIU_ERR 17
-#define IRQ_IOP32X_ATU_ERR 18
-#define IRQ_IOP32X_MCU_ERR 19
-#define IRQ_IOP32X_DMA0_ERR 20
-#define IRQ_IOP32X_DMA1_ERR 21
-#define IRQ_IOP32X_AA_ERR 23
-#define IRQ_IOP32X_MSG_ERR 24
-#define IRQ_IOP32X_SSP 25
-#define IRQ_IOP32X_XINT0 27
-#define IRQ_IOP32X_XINT1 28
-#define IRQ_IOP32X_XINT2 29
-#define IRQ_IOP32X_XINT3 30
-#define IRQ_IOP32X_HPI 31
+#define IRQ_IOP32X_DMA0_EOT IOP_IRQ(0)
+#define IRQ_IOP32X_DMA0_EOC IOP_IRQ(1)
+#define IRQ_IOP32X_DMA1_EOT IOP_IRQ(2)
+#define IRQ_IOP32X_DMA1_EOC IOP_IRQ(3)
+#define IRQ_IOP32X_AA_EOT IOP_IRQ(6)
+#define IRQ_IOP32X_AA_EOC IOP_IRQ(7)
+#define IRQ_IOP32X_CORE_PMON IOP_IRQ(8)
+#define IRQ_IOP32X_TIMER0 IOP_IRQ(9)
+#define IRQ_IOP32X_TIMER1 IOP_IRQ(10)
+#define IRQ_IOP32X_I2C_0 IOP_IRQ(11)
+#define IRQ_IOP32X_I2C_1 IOP_IRQ(12)
+#define IRQ_IOP32X_MESSAGING IOP_IRQ(13)
+#define IRQ_IOP32X_ATU_BIST IOP_IRQ(14)
+#define IRQ_IOP32X_PERFMON IOP_IRQ(15)
+#define IRQ_IOP32X_CORE_PMU IOP_IRQ(16)
+#define IRQ_IOP32X_BIU_ERR IOP_IRQ(17)
+#define IRQ_IOP32X_ATU_ERR IOP_IRQ(18)
+#define IRQ_IOP32X_MCU_ERR IOP_IRQ(19)
+#define IRQ_IOP32X_DMA0_ERR IOP_IRQ(20)
+#define IRQ_IOP32X_DMA1_ERR IOP_IRQ(21)
+#define IRQ_IOP32X_AA_ERR IOP_IRQ(23)
+#define IRQ_IOP32X_MSG_ERR IOP_IRQ(24)
+#define IRQ_IOP32X_SSP IOP_IRQ(25)
+#define IRQ_IOP32X_XINT0 IOP_IRQ(27)
+#define IRQ_IOP32X_XINT1 IOP_IRQ(28)
+#define IRQ_IOP32X_XINT2 IOP_IRQ(29)
+#define IRQ_IOP32X_XINT3 IOP_IRQ(30)
+#define IRQ_IOP32X_HPI IOP_IRQ(31)
#endif
From: Daniel Palmer <[email protected]>
[ Upstream commit ea49432d184a6a09f84461604b7711a4e9f5ec9c ]
The mstar SoCs have an arch timer but HAVE_ARM_ARCH_TIMER wasn't
selected. If MSC313E_TIMER isn't selected then the kernel gets
stuck at boot because there are no timers available.
Signed-off-by: Daniel Palmer <[email protected]>
Link: https://lore.kernel.org/r/[email protected]'
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/mach-mstar/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/mach-mstar/Kconfig b/arch/arm/mach-mstar/Kconfig
index 576d1ab293c8..30560fdf87ed 100644
--- a/arch/arm/mach-mstar/Kconfig
+++ b/arch/arm/mach-mstar/Kconfig
@@ -3,6 +3,7 @@ menuconfig ARCH_MSTARV7
depends on ARCH_MULTI_V7
select ARM_GIC
select ARM_HEAVY_MB
+ select HAVE_ARM_ARCH_TIMER
select MST_IRQ
help
Support for newer MStar/Sigmastar SoC families that are
--
2.34.1
From: Hans de Goede <[email protected]>
[ Upstream commit a47ac019e7e8129b93a0b991e04b2a59872e053d ]
The mma8452_driver declares both of_match_table and i2c_driver.id_table
match-tables, but its probe() function only checked for of matches.
Add support for i2c_device_id matches. This fixes the driver not loading
on some x86 tablets (e.g. the Nextbook Ares 8) where the i2c_client is
instantiated by platform code using an i2c_device_id.
Drop of_match_ptr() protection to avoid unused warning.
Fixes: c3cdd6e48e35 ("iio: mma8452: refactor for seperating chip specific data")
Signed-off-by: Hans de Goede <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/iio/accel/mma8452.c | 29 ++++++++++++++++++-----------
1 file changed, 18 insertions(+), 11 deletions(-)
diff --git a/drivers/iio/accel/mma8452.c b/drivers/iio/accel/mma8452.c
index a7208704d31c..e7e280282774 100644
--- a/drivers/iio/accel/mma8452.c
+++ b/drivers/iio/accel/mma8452.c
@@ -176,6 +176,7 @@ static const struct mma8452_event_regs trans_ev_regs = {
* @enabled_events: event flags enabled and handled by this driver
*/
struct mma_chip_info {
+ const char *name;
u8 chip_id;
const struct iio_chan_spec *channels;
int num_channels;
@@ -1303,6 +1304,7 @@ enum {
static const struct mma_chip_info mma_chip_info_table[] = {
[mma8451] = {
+ .name = "mma8451",
.chip_id = MMA8451_DEVICE_ID,
.channels = mma8451_channels,
.num_channels = ARRAY_SIZE(mma8451_channels),
@@ -1327,6 +1329,7 @@ static const struct mma_chip_info mma_chip_info_table[] = {
MMA8452_INT_FF_MT,
},
[mma8452] = {
+ .name = "mma8452",
.chip_id = MMA8452_DEVICE_ID,
.channels = mma8452_channels,
.num_channels = ARRAY_SIZE(mma8452_channels),
@@ -1343,6 +1346,7 @@ static const struct mma_chip_info mma_chip_info_table[] = {
MMA8452_INT_FF_MT,
},
[mma8453] = {
+ .name = "mma8453",
.chip_id = MMA8453_DEVICE_ID,
.channels = mma8453_channels,
.num_channels = ARRAY_SIZE(mma8453_channels),
@@ -1359,6 +1363,7 @@ static const struct mma_chip_info mma_chip_info_table[] = {
MMA8452_INT_FF_MT,
},
[mma8652] = {
+ .name = "mma8652",
.chip_id = MMA8652_DEVICE_ID,
.channels = mma8652_channels,
.num_channels = ARRAY_SIZE(mma8652_channels),
@@ -1368,6 +1373,7 @@ static const struct mma_chip_info mma_chip_info_table[] = {
.enabled_events = MMA8452_INT_FF_MT,
},
[mma8653] = {
+ .name = "mma8653",
.chip_id = MMA8653_DEVICE_ID,
.channels = mma8653_channels,
.num_channels = ARRAY_SIZE(mma8653_channels),
@@ -1382,6 +1388,7 @@ static const struct mma_chip_info mma_chip_info_table[] = {
.enabled_events = MMA8452_INT_FF_MT,
},
[fxls8471] = {
+ .name = "fxls8471",
.chip_id = FXLS8471_DEVICE_ID,
.channels = mma8451_channels,
.num_channels = ARRAY_SIZE(mma8451_channels),
@@ -1525,13 +1532,6 @@ static int mma8452_probe(struct i2c_client *client,
struct mma8452_data *data;
struct iio_dev *indio_dev;
int ret;
- const struct of_device_id *match;
-
- match = of_match_device(mma8452_dt_ids, &client->dev);
- if (!match) {
- dev_err(&client->dev, "unknown device model\n");
- return -ENODEV;
- }
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
if (!indio_dev)
@@ -1540,7 +1540,14 @@ static int mma8452_probe(struct i2c_client *client,
data = iio_priv(indio_dev);
data->client = client;
mutex_init(&data->lock);
- data->chip_info = match->data;
+
+ data->chip_info = device_get_match_data(&client->dev);
+ if (!data->chip_info && id) {
+ data->chip_info = &mma_chip_info_table[id->driver_data];
+ } else {
+ dev_err(&client->dev, "unknown device model\n");
+ return -ENODEV;
+ }
data->vdd_reg = devm_regulator_get(&client->dev, "vdd");
if (IS_ERR(data->vdd_reg))
@@ -1584,11 +1591,11 @@ static int mma8452_probe(struct i2c_client *client,
}
dev_info(&client->dev, "registering %s accelerometer; ID 0x%x\n",
- match->compatible, data->chip_info->chip_id);
+ data->chip_info->name, data->chip_info->chip_id);
i2c_set_clientdata(client, indio_dev);
indio_dev->info = &mma8452_info;
- indio_dev->name = id->name;
+ indio_dev->name = data->chip_info->name;
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->channels = data->chip_info->channels;
indio_dev->num_channels = data->chip_info->num_channels;
@@ -1814,7 +1821,7 @@ MODULE_DEVICE_TABLE(i2c, mma8452_id);
static struct i2c_driver mma8452_driver = {
.driver = {
.name = "mma8452",
- .of_match_table = of_match_ptr(mma8452_dt_ids),
+ .of_match_table = mma8452_dt_ids,
.pm = &mma8452_pm_ops,
},
.probe = mma8452_probe,
--
2.34.1
From: Anders Roxell <[email protected]>
commit a633cb1edddaa643fadc70abc88f89a408fa834a upstream.
Looks like there been a copy paste mistake when added the instruction
'stbcx' twice and one was probably meant to be 'sthcx'. Changing to
'sthcx' from 'stbcx'.
Fixes: 350779a29f11 ("powerpc: Handle most loads and stores in instruction emulation code")
Cc: [email protected] # v4.14+
Reported-by: Arnd Bergmann <[email protected]>
Signed-off-by: Anders Roxell <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/lib/sstep.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/powerpc/lib/sstep.c
+++ b/arch/powerpc/lib/sstep.c
@@ -3187,7 +3187,7 @@ int emulate_loadstore(struct pt_regs *re
__put_user_asmx(op->val, ea, err, "stbcx.", cr);
break;
case 2:
- __put_user_asmx(op->val, ea, err, "stbcx.", cr);
+ __put_user_asmx(op->val, ea, err, "sthcx.", cr);
break;
#endif
case 4:
From: Jiasheng Jiang <[email protected]>
[ Upstream commit ed7c9fef11931fc5d32a83d68017ff390bf5c280 ]
As the potential failure of the clk_enable(),
it should be better to check it and return error
if fails.
Fixes: 5f9a50c3e55e ("ASoC: Davinci: McBSP: add device tree support for McBSP")
Signed-off-by: Jiasheng Jiang <[email protected]>
Acked-by: Peter Ujfalusi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/ti/davinci-i2s.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/sound/soc/ti/davinci-i2s.c b/sound/soc/ti/davinci-i2s.c
index dd34504c09ba..4895bcee1f55 100644
--- a/sound/soc/ti/davinci-i2s.c
+++ b/sound/soc/ti/davinci-i2s.c
@@ -708,7 +708,9 @@ static int davinci_i2s_probe(struct platform_device *pdev)
dev->clk = clk_get(&pdev->dev, NULL);
if (IS_ERR(dev->clk))
return -ENODEV;
- clk_enable(dev->clk);
+ ret = clk_enable(dev->clk);
+ if (ret)
+ goto err_put_clk;
dev->dev = &pdev->dev;
dev_set_drvdata(&pdev->dev, dev);
@@ -730,6 +732,7 @@ static int davinci_i2s_probe(struct platform_device *pdev)
snd_soc_unregister_component(&pdev->dev);
err_release_clk:
clk_disable(dev->clk);
+err_put_clk:
clk_put(dev->clk);
return ret;
}
--
2.34.1
From: Jiasheng Jiang <[email protected]>
[ Upstream commit 1fdbbfd5099f797a4dac05e7ef0192ba4a9c39b4 ]
Because of the possible failure of the dma_supported(), the
dma_set_mask_and_coherent() may return error num.
Therefore, it should be better to check it and return the error if
fails.
Fixes: 1c894225bf5b ("iommu/ipmmu-vmsa: IPMMU device is 40-bit bus master")
Signed-off-by: Jiasheng Jiang <[email protected]>
Reviewed-by: Nikita Yushchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joerg Roedel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/iommu/ipmmu-vmsa.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/iommu/ipmmu-vmsa.c b/drivers/iommu/ipmmu-vmsa.c
index 0f18abda0e20..bae6c7078ec9 100644
--- a/drivers/iommu/ipmmu-vmsa.c
+++ b/drivers/iommu/ipmmu-vmsa.c
@@ -1013,7 +1013,9 @@ static int ipmmu_probe(struct platform_device *pdev)
bitmap_zero(mmu->ctx, IPMMU_CTX_MAX);
mmu->features = of_device_get_match_data(&pdev->dev);
memset(mmu->utlb_ctx, IPMMU_CTX_INVALID, mmu->features->num_utlbs);
- dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(40));
+ ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(40));
+ if (ret)
+ return ret;
/* Map I/O memory and request IRQ. */
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
--
2.34.1
From: Aaron Conole <[email protected]>
[ Upstream commit 60b44ca6bd7518dd38fa2719bc9240378b6172c3 ]
During NAT, a tuple collision may occur. When this happens, openvswitch
will make a second pass through NAT which will perform additional packet
modification. This will update the skb data, but not the flow key that
OVS uses. This means that future flow lookups, and packet matches will
have incorrect data. This has been supported since
5d50aa83e2c8 ("openvswitch: support asymmetric conntrack").
That commit failed to properly update the sw_flow_key attributes, since
it only called the ovs_ct_nat_update_key once, rather than each time
ovs_ct_nat_execute was called. As these two operations are linked, the
ovs_ct_nat_execute() function should always make sure that the
sw_flow_key is updated after a successful call through NAT infrastructure.
Fixes: 5d50aa83e2c8 ("openvswitch: support asymmetric conntrack")
Cc: Dumitru Ceara <[email protected]>
Cc: Numan Siddique <[email protected]>
Signed-off-by: Aaron Conole <[email protected]>
Acked-by: Eelco Chaudron <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/openvswitch/conntrack.c | 118 ++++++++++++++++++------------------
1 file changed, 59 insertions(+), 59 deletions(-)
diff --git a/net/openvswitch/conntrack.c b/net/openvswitch/conntrack.c
index a11b558813c1..7ff98d39ec94 100644
--- a/net/openvswitch/conntrack.c
+++ b/net/openvswitch/conntrack.c
@@ -730,6 +730,57 @@ static bool skb_nfct_cached(struct net *net,
}
#if IS_ENABLED(CONFIG_NF_NAT)
+static void ovs_nat_update_key(struct sw_flow_key *key,
+ const struct sk_buff *skb,
+ enum nf_nat_manip_type maniptype)
+{
+ if (maniptype == NF_NAT_MANIP_SRC) {
+ __be16 src;
+
+ key->ct_state |= OVS_CS_F_SRC_NAT;
+ if (key->eth.type == htons(ETH_P_IP))
+ key->ipv4.addr.src = ip_hdr(skb)->saddr;
+ else if (key->eth.type == htons(ETH_P_IPV6))
+ memcpy(&key->ipv6.addr.src, &ipv6_hdr(skb)->saddr,
+ sizeof(key->ipv6.addr.src));
+ else
+ return;
+
+ if (key->ip.proto == IPPROTO_UDP)
+ src = udp_hdr(skb)->source;
+ else if (key->ip.proto == IPPROTO_TCP)
+ src = tcp_hdr(skb)->source;
+ else if (key->ip.proto == IPPROTO_SCTP)
+ src = sctp_hdr(skb)->source;
+ else
+ return;
+
+ key->tp.src = src;
+ } else {
+ __be16 dst;
+
+ key->ct_state |= OVS_CS_F_DST_NAT;
+ if (key->eth.type == htons(ETH_P_IP))
+ key->ipv4.addr.dst = ip_hdr(skb)->daddr;
+ else if (key->eth.type == htons(ETH_P_IPV6))
+ memcpy(&key->ipv6.addr.dst, &ipv6_hdr(skb)->daddr,
+ sizeof(key->ipv6.addr.dst));
+ else
+ return;
+
+ if (key->ip.proto == IPPROTO_UDP)
+ dst = udp_hdr(skb)->dest;
+ else if (key->ip.proto == IPPROTO_TCP)
+ dst = tcp_hdr(skb)->dest;
+ else if (key->ip.proto == IPPROTO_SCTP)
+ dst = sctp_hdr(skb)->dest;
+ else
+ return;
+
+ key->tp.dst = dst;
+ }
+}
+
/* Modelled after nf_nat_ipv[46]_fn().
* range is only used for new, uninitialized NAT state.
* Returns either NF_ACCEPT or NF_DROP.
@@ -737,7 +788,7 @@ static bool skb_nfct_cached(struct net *net,
static int ovs_ct_nat_execute(struct sk_buff *skb, struct nf_conn *ct,
enum ip_conntrack_info ctinfo,
const struct nf_nat_range2 *range,
- enum nf_nat_manip_type maniptype)
+ enum nf_nat_manip_type maniptype, struct sw_flow_key *key)
{
int hooknum, nh_off, err = NF_ACCEPT;
@@ -810,58 +861,11 @@ static int ovs_ct_nat_execute(struct sk_buff *skb, struct nf_conn *ct,
skb_push(skb, nh_off);
skb_postpush_rcsum(skb, skb->data, nh_off);
- return err;
-}
-
-static void ovs_nat_update_key(struct sw_flow_key *key,
- const struct sk_buff *skb,
- enum nf_nat_manip_type maniptype)
-{
- if (maniptype == NF_NAT_MANIP_SRC) {
- __be16 src;
-
- key->ct_state |= OVS_CS_F_SRC_NAT;
- if (key->eth.type == htons(ETH_P_IP))
- key->ipv4.addr.src = ip_hdr(skb)->saddr;
- else if (key->eth.type == htons(ETH_P_IPV6))
- memcpy(&key->ipv6.addr.src, &ipv6_hdr(skb)->saddr,
- sizeof(key->ipv6.addr.src));
- else
- return;
-
- if (key->ip.proto == IPPROTO_UDP)
- src = udp_hdr(skb)->source;
- else if (key->ip.proto == IPPROTO_TCP)
- src = tcp_hdr(skb)->source;
- else if (key->ip.proto == IPPROTO_SCTP)
- src = sctp_hdr(skb)->source;
- else
- return;
-
- key->tp.src = src;
- } else {
- __be16 dst;
-
- key->ct_state |= OVS_CS_F_DST_NAT;
- if (key->eth.type == htons(ETH_P_IP))
- key->ipv4.addr.dst = ip_hdr(skb)->daddr;
- else if (key->eth.type == htons(ETH_P_IPV6))
- memcpy(&key->ipv6.addr.dst, &ipv6_hdr(skb)->daddr,
- sizeof(key->ipv6.addr.dst));
- else
- return;
-
- if (key->ip.proto == IPPROTO_UDP)
- dst = udp_hdr(skb)->dest;
- else if (key->ip.proto == IPPROTO_TCP)
- dst = tcp_hdr(skb)->dest;
- else if (key->ip.proto == IPPROTO_SCTP)
- dst = sctp_hdr(skb)->dest;
- else
- return;
+ /* Update the flow key if NAT successful. */
+ if (err == NF_ACCEPT)
+ ovs_nat_update_key(key, skb, maniptype);
- key->tp.dst = dst;
- }
+ return err;
}
/* Returns NF_DROP if the packet should be dropped, NF_ACCEPT otherwise. */
@@ -903,7 +907,7 @@ static int ovs_ct_nat(struct net *net, struct sw_flow_key *key,
} else {
return NF_ACCEPT; /* Connection is not NATed. */
}
- err = ovs_ct_nat_execute(skb, ct, ctinfo, &info->range, maniptype);
+ err = ovs_ct_nat_execute(skb, ct, ctinfo, &info->range, maniptype, key);
if (err == NF_ACCEPT && ct->status & IPS_DST_NAT) {
if (ct->status & IPS_SRC_NAT) {
@@ -913,17 +917,13 @@ static int ovs_ct_nat(struct net *net, struct sw_flow_key *key,
maniptype = NF_NAT_MANIP_SRC;
err = ovs_ct_nat_execute(skb, ct, ctinfo, &info->range,
- maniptype);
+ maniptype, key);
} else if (CTINFO2DIR(ctinfo) == IP_CT_DIR_ORIGINAL) {
err = ovs_ct_nat_execute(skb, ct, ctinfo, NULL,
- NF_NAT_MANIP_SRC);
+ NF_NAT_MANIP_SRC, key);
}
}
- /* Mark NAT done if successful and update the flow key. */
- if (err == NF_ACCEPT)
- ovs_nat_update_key(key, skb, maniptype);
-
return err;
}
#else /* !CONFIG_NF_NAT */
--
2.34.1
From: Andreas Gruenbacher <[email protected]>
commit 0c8eb2884a42d992c7726539328b7d3568f22143 upstream.
When switching from __get_user to fault_in_pages_readable, commit
9f9eae5ce717 broke kvm_use_magic_page: like __get_user,
fault_in_pages_readable returns 0 on success.
Fixes: 9f9eae5ce717 ("powerpc/kvm: Prefer fault_in_pages_readable function")
Cc: [email protected] # v4.18+
Signed-off-by: Andreas Gruenbacher <[email protected]>
Signed-off-by: Anand Jain <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/kernel/kvm.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/powerpc/kernel/kvm.c
+++ b/arch/powerpc/kernel/kvm.c
@@ -669,7 +669,7 @@ static void __init kvm_use_magic_page(vo
on_each_cpu(kvm_map_magic_page, &features, 1);
/* Quick self-test to see if the mapping works */
- if (!fault_in_pages_readable((const char *)KVM_MAGIC_PAGE, sizeof(u32))) {
+ if (fault_in_pages_readable((const char *)KVM_MAGIC_PAGE, sizeof(u32))) {
kvm_patching_worked = false;
return;
}
From: Jiasheng Jiang <[email protected]>
[ Upstream commit 7e4760713391ee46dc913194b33ae234389a174e ]
As the possible failure of the ioremap(), the 'local->sram' and other
two could be NULL.
Therefore it should be better to check it in order to avoid the later
dev_dbg.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Jiasheng Jiang <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ray_cs.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c
index bf3fbd14eda3..091eea0d958d 100644
--- a/drivers/net/wireless/ray_cs.c
+++ b/drivers/net/wireless/ray_cs.c
@@ -382,6 +382,8 @@ static int ray_config(struct pcmcia_device *link)
goto failed;
local->sram = ioremap(link->resource[2]->start,
resource_size(link->resource[2]));
+ if (!local->sram)
+ goto failed;
/*** Set up 16k window for shared memory (receive buffer) ***************/
link->resource[3]->flags |=
@@ -396,6 +398,8 @@ static int ray_config(struct pcmcia_device *link)
goto failed;
local->rmem = ioremap(link->resource[3]->start,
resource_size(link->resource[3]));
+ if (!local->rmem)
+ goto failed;
/*** Set up window for attribute memory ***********************************/
link->resource[4]->flags |=
@@ -410,6 +414,8 @@ static int ray_config(struct pcmcia_device *link)
goto failed;
local->amem = ioremap(link->resource[4]->start,
resource_size(link->resource[4]));
+ if (!local->amem)
+ goto failed;
dev_dbg(&link->dev, "ray_config sram=%p\n", local->sram);
dev_dbg(&link->dev, "ray_config rmem=%p\n", local->rmem);
--
2.34.1
From: Patrick Rudolph <[email protected]>
[ Upstream commit 686d303ee6301261b422ea51e64833d7909a2c36 ]
On PMBUS devices with multiple pages, the regulator ops need to be
protected with the update mutex. This prevents accidentally changing
the page in a separate thread while operating on the PMBUS_OPERATION
register.
Tested on Infineon xdpe11280 while a separate thread polls for sensor
data.
Signed-off-by: Patrick Rudolph <[email protected]>
Signed-off-by: Marcello Sylvester Bauer <[email protected]>
Link: https://lore.kernel.org/r/b991506bcbf665f7af185945f70bf9d5cf04637c.1645804976.git.sylv@sylv.io
Fixes: ddbb4db4ced1b ("hwmon: (pmbus) Add regulator support")
Cc: Alan Tull <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hwmon/pmbus/pmbus_core.c | 16 +++++++++++++---
1 file changed, 13 insertions(+), 3 deletions(-)
diff --git a/drivers/hwmon/pmbus/pmbus_core.c b/drivers/hwmon/pmbus/pmbus_core.c
index 71798fde2ef0..7a13057007d9 100644
--- a/drivers/hwmon/pmbus/pmbus_core.c
+++ b/drivers/hwmon/pmbus/pmbus_core.c
@@ -2255,10 +2255,14 @@ static int pmbus_regulator_is_enabled(struct regulator_dev *rdev)
{
struct device *dev = rdev_get_dev(rdev);
struct i2c_client *client = to_i2c_client(dev->parent);
+ struct pmbus_data *data = i2c_get_clientdata(client);
u8 page = rdev_get_id(rdev);
int ret;
+ mutex_lock(&data->update_lock);
ret = pmbus_read_byte_data(client, page, PMBUS_OPERATION);
+ mutex_unlock(&data->update_lock);
+
if (ret < 0)
return ret;
@@ -2269,11 +2273,17 @@ static int _pmbus_regulator_on_off(struct regulator_dev *rdev, bool enable)
{
struct device *dev = rdev_get_dev(rdev);
struct i2c_client *client = to_i2c_client(dev->parent);
+ struct pmbus_data *data = i2c_get_clientdata(client);
u8 page = rdev_get_id(rdev);
+ int ret;
- return pmbus_update_byte_data(client, page, PMBUS_OPERATION,
- PB_OPERATION_CONTROL_ON,
- enable ? PB_OPERATION_CONTROL_ON : 0);
+ mutex_lock(&data->update_lock);
+ ret = pmbus_update_byte_data(client, page, PMBUS_OPERATION,
+ PB_OPERATION_CONTROL_ON,
+ enable ? PB_OPERATION_CONTROL_ON : 0);
+ mutex_unlock(&data->update_lock);
+
+ return ret;
}
static int pmbus_regulator_enable(struct regulator_dev *rdev)
--
2.34.1
From: Miaoqian Lin <[email protected]>
[ Upstream commit c3d66a164c726cc3b072232d3b6d87575d194084 ]
platform_get_irq() returns negative error number instead 0 on failure.
And the doc of platform_get_irq() provides a usage example:
int irq = platform_get_irq(pdev, 0);
if (irq < 0)
return irq;
Fix the check of return value to catch errors correctly.
Fixes: cdd5de500b2c ("soc: ti: Add wkup_m3_ipc driver")
Signed-off-by: Miaoqian Lin <[email protected]>
Signed-off-by: Nishanth Menon <[email protected]>
Acked-by: Dave Gerlach <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/soc/ti/wkup_m3_ipc.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/soc/ti/wkup_m3_ipc.c b/drivers/soc/ti/wkup_m3_ipc.c
index e9ece45d7a33..ef3f95fefab5 100644
--- a/drivers/soc/ti/wkup_m3_ipc.c
+++ b/drivers/soc/ti/wkup_m3_ipc.c
@@ -447,9 +447,9 @@ static int wkup_m3_ipc_probe(struct platform_device *pdev)
}
irq = platform_get_irq(pdev, 0);
- if (!irq) {
+ if (irq < 0) {
dev_err(&pdev->dev, "no irq resource\n");
- return -ENXIO;
+ return irq;
}
ret = devm_request_irq(dev, irq, wkup_m3_txev_handler,
--
2.34.1
From: Peiwei Hu <[email protected]>
[ Upstream commit 52cdb013036391d9d87aba5b4fc49cdfc6ea4b23 ]
Fix leak in error path.
Signed-off-by: Peiwei Hu <[email protected]>
Signed-off-by: Sean Young <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/rc/ir_toy.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/media/rc/ir_toy.c b/drivers/media/rc/ir_toy.c
index 1aa7989e756c..7f394277478b 100644
--- a/drivers/media/rc/ir_toy.c
+++ b/drivers/media/rc/ir_toy.c
@@ -429,7 +429,7 @@ static int irtoy_probe(struct usb_interface *intf,
err = usb_submit_urb(irtoy->urb_in, GFP_KERNEL);
if (err != 0) {
dev_err(irtoy->dev, "fail to submit in urb: %d\n", err);
- return err;
+ goto free_rcdev;
}
err = irtoy_setup(irtoy);
--
2.34.1
From: Manish Chopra <[email protected]>
commit 4e6e6bec7440b9b76f312f28b1f4e944eebb3abc upstream.
Driver does support SR-IOV VFs trust configuration but
it does not display it when queried via ip link utility.
Cc: [email protected]
Fixes: f990c82c385b ("qed*: Add support for ndo_set_vf_trust")
Signed-off-by: Manish Chopra <[email protected]>
Signed-off-by: Ariel Elior <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/qlogic/qed/qed_sriov.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/net/ethernet/qlogic/qed/qed_sriov.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_sriov.c
@@ -4691,6 +4691,7 @@ static int qed_get_vf_config(struct qed_
tx_rate = vf_info->tx_rate;
ivi->max_tx_rate = tx_rate ? tx_rate : link.speed;
ivi->min_tx_rate = qed_iov_get_vf_min_rate(hwfn, vf_id);
+ ivi->trusted = vf_info->is_trusted_request;
return 0;
}
From: Anssi Hannula <[email protected]>
commit 3105bc977d7cbf2edc35e24cc7e009686f6e4a56 upstream.
xhci_decode_usbsts() is expected to return a zero-terminated string by
its only caller, xhci_stop_endpoint_command_watchdog(), which directly
logs the return value:
xhci_warn(xhci, "USBSTS:%s\n", xhci_decode_usbsts(str, usbsts));
However, if no recognized bits are set in usbsts, the function will
return without having called any sprintf() and therefore return an
untouched non-zero-terminated caller-provided buffer, causing garbage
to be output to log.
Fix that by always including the raw value in the output.
Note that before commit 4843b4b5ec64 ("xhci: fix even more unsafe memory
usage in xhci tracing") the result effect in the failure case was different
as a static buffer was used here, but the code still worked incorrectly.
Fixes: 9c1aa36efdae ("xhci: Show host status when watchdog triggers and host is assumed dead.")
Cc: [email protected]
Signed-off-by: Anssi Hannula <[email protected]>
Signed-off-by: Mathias Nyman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/host/xhci.h | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -2612,8 +2612,11 @@ static inline const char *xhci_decode_us
{
int ret = 0;
+ ret = sprintf(str, " 0x%08x", usbsts);
+
if (usbsts == ~(u32)0)
- return " 0xffffffff";
+ return str;
+
if (usbsts & STS_HALT)
ret += sprintf(str + ret, " HCHalted");
if (usbsts & STS_FATAL)
From: Frank Wunderlich <[email protected]>
[ Upstream commit 55927cb44db43a57699fa652e2437a91620385dc ]
After converting ahci-platform txt binding to yaml nodename is reported
as not matching the standard:
arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dt.yaml:
ahci@663f2000: $nodename:0: 'ahci@663f2000' does not match '^sata(@.*)?$'
Fix it to match binding.
Fixes: ac9aae00f0fc ("arm64: dts: Add SATA3 AHCI and SATA3 PHY DT nodes for NS2")
Signed-off-by: Frank Wunderlich <[email protected]>
Signed-off-by: Florian Fainelli <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
index 2cfeaf3b0a87..8c218689fef7 100644
--- a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
+++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
@@ -687,7 +687,7 @@
};
};
- sata: ahci@663f2000 {
+ sata: sata@663f2000 {
compatible = "brcm,iproc-ahci", "generic-ahci";
reg = <0x663f2000 0x1000>;
dma-coherent;
--
2.34.1
From: Geert Uytterhoeven <[email protected]>
[ Upstream commit 9e04a0eda84fccab0ac22a33825ad53f47c968c7 ]
The second video-in channel on RZ/G1C has only 12 data lanes, but the
pin control driver uses the vin_data union, which is meant for 24 data
lanes, thus wasting space.
Fix this by using the vin_data12 union instead.
This reduces kernel size by 96 bytes.
Fixes: 50f3f2d73e3426ba ("pinctrl: sh-pfc: Reduce kernel size for narrow VIN channels")
Signed-off-by: Geert Uytterhoeven <[email protected]>
Link: https://lore.kernel.org/r/52716fa89139f6f92592633edb52804d4c5e18f0.1640269757.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pinctrl/renesas/pfc-r8a77470.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/pinctrl/renesas/pfc-r8a77470.c b/drivers/pinctrl/renesas/pfc-r8a77470.c
index b3b116da1bb0..14005725a726 100644
--- a/drivers/pinctrl/renesas/pfc-r8a77470.c
+++ b/drivers/pinctrl/renesas/pfc-r8a77470.c
@@ -2121,7 +2121,7 @@ static const unsigned int vin0_clk_mux[] = {
VI0_CLK_MARK,
};
/* - VIN1 ------------------------------------------------------------------- */
-static const union vin_data vin1_data_pins = {
+static const union vin_data12 vin1_data_pins = {
.data12 = {
RCAR_GP_PIN(3, 1), RCAR_GP_PIN(3, 2),
RCAR_GP_PIN(3, 3), RCAR_GP_PIN(3, 4),
@@ -2131,7 +2131,7 @@ static const union vin_data vin1_data_pins = {
RCAR_GP_PIN(3, 15), RCAR_GP_PIN(3, 16),
},
};
-static const union vin_data vin1_data_mux = {
+static const union vin_data12 vin1_data_mux = {
.data12 = {
VI1_DATA0_MARK, VI1_DATA1_MARK,
VI1_DATA2_MARK, VI1_DATA3_MARK,
--
2.34.1
From: YueHaibing <[email protected]>
[ Upstream commit 567e44fb51b4f909ae58038a7301352eecea8426 ]
If PPC_BOOK3S, PPC_PMAC and PPC32 is n, COMPILE_TEST build fails:
drivers/video/fbdev/controlfb.c:70:0: error: "pgprot_cached_wthru" redefined [-Werror]
#define pgprot_cached_wthru(prot) (prot)
In file included from ./arch/powerpc/include/asm/pgtable.h:20:0,
from ./include/linux/pgtable.h:6,
from ./include/linux/mm.h:33,
from drivers/video/fbdev/controlfb.c:37:
./arch/powerpc/include/asm/nohash/pgtable.h:243:0: note: this is the location of the previous definition
#define pgprot_cached_wthru(prot) (__pgprot((pgprot_val(prot) & ~_PAGE_CACHE_CTL) | \
Fixes: a07a63b0e24d ("video: fbdev: controlfb: add COMPILE_TEST support")
Signed-off-by: YueHaibing <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/video/fbdev/controlfb.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/video/fbdev/controlfb.c b/drivers/video/fbdev/controlfb.c
index 509311471d51..bd59e7b11ed5 100644
--- a/drivers/video/fbdev/controlfb.c
+++ b/drivers/video/fbdev/controlfb.c
@@ -67,7 +67,9 @@
#define out_8(addr, val) (void)(val)
#define in_le32(addr) 0
#define out_le32(addr, val) (void)(val)
+#ifndef pgprot_cached_wthru
#define pgprot_cached_wthru(prot) (prot)
+#endif
#else
static void invalid_vram_cache(void __force *addr)
{
--
2.34.1
From: Wang Wensheng <[email protected]>
[ Upstream commit 3b891513f95cba3944e72c1139ea706d04f3781b ]
Fix to return a negative error code from the error handling case instead
of 0, as done elsewhere in this function.
Fixes: 7e7292dba215 ("ASoC: fsl: add imx-es8328 machine driver")
Signed-off-by: Wang Wensheng <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/fsl/imx-es8328.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/sound/soc/fsl/imx-es8328.c b/sound/soc/fsl/imx-es8328.c
index fad1eb6253d5..9e602c345619 100644
--- a/sound/soc/fsl/imx-es8328.c
+++ b/sound/soc/fsl/imx-es8328.c
@@ -87,6 +87,7 @@ static int imx_es8328_probe(struct platform_device *pdev)
if (int_port > MUX_PORT_MAX || int_port == 0) {
dev_err(dev, "mux-int-port: hardware only has %d mux ports\n",
MUX_PORT_MAX);
+ ret = -EINVAL;
goto fail;
}
--
2.34.1
From: Eric Biggers <[email protected]>
commit c51abd96837f600d8fd940b6ab8e2da578575504 upstream.
In many cases, keyctl_pkey_params_get_2() is validating the user buffer
lengths against the wrong algorithm properties. Fix it to check against
the correct properties.
Probably this wasn't noticed before because for all asymmetric keys of
the "public_key" subtype, max_data_size == max_sig_size == max_enc_size
== max_dec_size. However, this isn't necessarily true for the
"asym_tpm" subtype (it should be, but it's not strictly validated). Of
course, future key types could have different values as well.
Fixes: 00d60fd3b932 ("KEYS: Provide keyctls to drive the new key type ops for asymmetric keys [ver #2]")
Cc: <[email protected]> # v4.20+
Signed-off-by: Eric Biggers <[email protected]>
Reviewed-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
security/keys/keyctl_pkey.c | 14 +++++++++++---
1 file changed, 11 insertions(+), 3 deletions(-)
--- a/security/keys/keyctl_pkey.c
+++ b/security/keys/keyctl_pkey.c
@@ -135,15 +135,23 @@ static int keyctl_pkey_params_get_2(cons
switch (op) {
case KEYCTL_PKEY_ENCRYPT:
+ if (uparams.in_len > info.max_dec_size ||
+ uparams.out_len > info.max_enc_size)
+ return -EINVAL;
+ break;
case KEYCTL_PKEY_DECRYPT:
if (uparams.in_len > info.max_enc_size ||
uparams.out_len > info.max_dec_size)
return -EINVAL;
break;
case KEYCTL_PKEY_SIGN:
+ if (uparams.in_len > info.max_data_size ||
+ uparams.out_len > info.max_sig_size)
+ return -EINVAL;
+ break;
case KEYCTL_PKEY_VERIFY:
- if (uparams.in_len > info.max_sig_size ||
- uparams.out_len > info.max_data_size)
+ if (uparams.in_len > info.max_data_size ||
+ uparams.in2_len > info.max_sig_size)
return -EINVAL;
break;
default:
@@ -151,7 +159,7 @@ static int keyctl_pkey_params_get_2(cons
}
params->in_len = uparams.in_len;
- params->out_len = uparams.out_len;
+ params->out_len = uparams.out_len; /* Note: same as in2_len */
return 0;
}
From: Corentin Labbe <[email protected]>
[ Upstream commit dba633342994ce47d347bcf5522ba28301247b79 ]
Doing ipsec produces a spinlock recursion warning.
This is due to not disabling BH during crypto completion function.
Fixes: 48fe583fe541 ("crypto: amlogic - Add crypto accelerator for amlogic GXL")
Signed-off-by: Corentin Labbe <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/crypto/amlogic/amlogic-gxl-cipher.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/crypto/amlogic/amlogic-gxl-cipher.c b/drivers/crypto/amlogic/amlogic-gxl-cipher.c
index 8b5e07316352..652e72d030bb 100644
--- a/drivers/crypto/amlogic/amlogic-gxl-cipher.c
+++ b/drivers/crypto/amlogic/amlogic-gxl-cipher.c
@@ -265,7 +265,9 @@ static int meson_handle_cipher_request(struct crypto_engine *engine,
struct skcipher_request *breq = container_of(areq, struct skcipher_request, base);
err = meson_cipher(breq);
+ local_bh_disable();
crypto_finalize_skcipher_request(engine, breq, err);
+ local_bh_enable();
return 0;
}
--
2.34.1
From: Waiman Long <[email protected]>
[ Upstream commit fb7275acd6fb988313dddd8d3d19efa70d9015ad ]
When dumping lock_classes information via /proc/lockdep, we can't take
the lockdep lock as the lock hold time is indeterminate. Iterating
over all_lock_classes without holding lock can be dangerous as there
is a slight chance that it may branch off to other lists leading to
infinite loop or even access invalid memory if changes are made to
all_lock_classes list in parallel.
To avoid this problem, iteration of lock classes is now done directly
on the lock_classes array itself. The lock_classes_in_use bitmap is
checked to see if the lock class is being used. To avoid iterating
the full array all the times, a new max_lock_class_idx value is added
to track the maximum lock_class index that is currently being used.
We can theoretically take the lockdep lock for iterating all_lock_classes
when other lockdep files (lockdep_stats and lock_stat) are accessed as
the lock hold time will be shorter for them. For consistency, they are
also modified to iterate the lock_classes array directly.
Signed-off-by: Waiman Long <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/locking/lockdep.c | 14 +++++---
kernel/locking/lockdep_internals.h | 6 ++--
kernel/locking/lockdep_proc.c | 51 +++++++++++++++++++++++++-----
3 files changed, 56 insertions(+), 15 deletions(-)
diff --git a/kernel/locking/lockdep.c b/kernel/locking/lockdep.c
index aa758236ff6a..b6683cefe19a 100644
--- a/kernel/locking/lockdep.c
+++ b/kernel/locking/lockdep.c
@@ -182,11 +182,9 @@ static DECLARE_BITMAP(list_entries_in_use, MAX_LOCKDEP_ENTRIES);
static struct hlist_head lock_keys_hash[KEYHASH_SIZE];
unsigned long nr_lock_classes;
unsigned long nr_zapped_classes;
-#ifndef CONFIG_DEBUG_LOCKDEP
-static
-#endif
+unsigned long max_lock_class_idx;
struct lock_class lock_classes[MAX_LOCKDEP_KEYS];
-static DECLARE_BITMAP(lock_classes_in_use, MAX_LOCKDEP_KEYS);
+DECLARE_BITMAP(lock_classes_in_use, MAX_LOCKDEP_KEYS);
static inline struct lock_class *hlock_class(struct held_lock *hlock)
{
@@ -337,7 +335,7 @@ static inline void lock_release_holdtime(struct held_lock *hlock)
* elements. These elements are linked together by the lock_entry member in
* struct lock_class.
*/
-LIST_HEAD(all_lock_classes);
+static LIST_HEAD(all_lock_classes);
static LIST_HEAD(free_lock_classes);
/**
@@ -1239,6 +1237,7 @@ register_lock_class(struct lockdep_map *lock, unsigned int subclass, int force)
struct lockdep_subclass_key *key;
struct hlist_head *hash_head;
struct lock_class *class;
+ int idx;
DEBUG_LOCKS_WARN_ON(!irqs_disabled());
@@ -1304,6 +1303,9 @@ register_lock_class(struct lockdep_map *lock, unsigned int subclass, int force)
* of classes.
*/
list_move_tail(&class->lock_entry, &all_lock_classes);
+ idx = class - lock_classes;
+ if (idx > max_lock_class_idx)
+ max_lock_class_idx = idx;
if (verbose(class)) {
graph_unlock();
@@ -5919,6 +5921,8 @@ static void zap_class(struct pending_free *pf, struct lock_class *class)
WRITE_ONCE(class->name, NULL);
nr_lock_classes--;
__clear_bit(class - lock_classes, lock_classes_in_use);
+ if (class - lock_classes == max_lock_class_idx)
+ max_lock_class_idx--;
} else {
WARN_ONCE(true, "%s() failed for class %s\n", __func__,
class->name);
diff --git a/kernel/locking/lockdep_internals.h b/kernel/locking/lockdep_internals.h
index de49f9e1c11b..a19b01635347 100644
--- a/kernel/locking/lockdep_internals.h
+++ b/kernel/locking/lockdep_internals.h
@@ -121,7 +121,6 @@ static const unsigned long LOCKF_USED_IN_IRQ_READ =
#define MAX_LOCKDEP_CHAIN_HLOCKS (MAX_LOCKDEP_CHAINS*5)
-extern struct list_head all_lock_classes;
extern struct lock_chain lock_chains[];
#define LOCK_USAGE_CHARS (2*XXX_LOCK_USAGE_STATES + 1)
@@ -151,6 +150,10 @@ extern unsigned int nr_large_chain_blocks;
extern unsigned int max_lockdep_depth;
extern unsigned int max_bfs_queue_depth;
+extern unsigned long max_lock_class_idx;
+
+extern struct lock_class lock_classes[MAX_LOCKDEP_KEYS];
+extern unsigned long lock_classes_in_use[];
#ifdef CONFIG_PROVE_LOCKING
extern unsigned long lockdep_count_forward_deps(struct lock_class *);
@@ -205,7 +208,6 @@ struct lockdep_stats {
};
DECLARE_PER_CPU(struct lockdep_stats, lockdep_stats);
-extern struct lock_class lock_classes[MAX_LOCKDEP_KEYS];
#define __debug_atomic_inc(ptr) \
this_cpu_inc(lockdep_stats.ptr);
diff --git a/kernel/locking/lockdep_proc.c b/kernel/locking/lockdep_proc.c
index 02ef87f50df2..ccb5292d1e19 100644
--- a/kernel/locking/lockdep_proc.c
+++ b/kernel/locking/lockdep_proc.c
@@ -24,14 +24,33 @@
#include "lockdep_internals.h"
+/*
+ * Since iteration of lock_classes is done without holding the lockdep lock,
+ * it is not safe to iterate all_lock_classes list directly as the iteration
+ * may branch off to free_lock_classes or the zapped list. Iteration is done
+ * directly on the lock_classes array by checking the lock_classes_in_use
+ * bitmap and max_lock_class_idx.
+ */
+#define iterate_lock_classes(idx, class) \
+ for (idx = 0, class = lock_classes; idx <= max_lock_class_idx; \
+ idx++, class++)
+
static void *l_next(struct seq_file *m, void *v, loff_t *pos)
{
- return seq_list_next(v, &all_lock_classes, pos);
+ struct lock_class *class = v;
+
+ ++class;
+ *pos = class - lock_classes;
+ return (*pos > max_lock_class_idx) ? NULL : class;
}
static void *l_start(struct seq_file *m, loff_t *pos)
{
- return seq_list_start_head(&all_lock_classes, *pos);
+ unsigned long idx = *pos;
+
+ if (idx > max_lock_class_idx)
+ return NULL;
+ return lock_classes + idx;
}
static void l_stop(struct seq_file *m, void *v)
@@ -57,14 +76,16 @@ static void print_name(struct seq_file *m, struct lock_class *class)
static int l_show(struct seq_file *m, void *v)
{
- struct lock_class *class = list_entry(v, struct lock_class, lock_entry);
+ struct lock_class *class = v;
struct lock_list *entry;
char usage[LOCK_USAGE_CHARS];
+ int idx = class - lock_classes;
- if (v == &all_lock_classes) {
+ if (v == lock_classes)
seq_printf(m, "all lock classes:\n");
+
+ if (!test_bit(idx, lock_classes_in_use))
return 0;
- }
seq_printf(m, "%p", class->key);
#ifdef CONFIG_DEBUG_LOCKDEP
@@ -218,8 +239,11 @@ static int lockdep_stats_show(struct seq_file *m, void *v)
#ifdef CONFIG_PROVE_LOCKING
struct lock_class *class;
+ unsigned long idx;
- list_for_each_entry(class, &all_lock_classes, lock_entry) {
+ iterate_lock_classes(idx, class) {
+ if (!test_bit(idx, lock_classes_in_use))
+ continue;
if (class->usage_mask == 0)
nr_unused++;
@@ -252,6 +276,7 @@ static int lockdep_stats_show(struct seq_file *m, void *v)
sum_forward_deps += lockdep_count_forward_deps(class);
}
+
#ifdef CONFIG_DEBUG_LOCKDEP
DEBUG_LOCKS_WARN_ON(debug_atomic_read(nr_unused_locks) != nr_unused);
#endif
@@ -343,6 +368,8 @@ static int lockdep_stats_show(struct seq_file *m, void *v)
seq_printf(m, " max bfs queue depth: %11u\n",
max_bfs_queue_depth);
#endif
+ seq_printf(m, " max lock class index: %11lu\n",
+ max_lock_class_idx);
lockdep_stats_debug_show(m);
seq_printf(m, " debug_locks: %11u\n",
debug_locks);
@@ -620,12 +647,16 @@ static int lock_stat_open(struct inode *inode, struct file *file)
if (!res) {
struct lock_stat_data *iter = data->stats;
struct seq_file *m = file->private_data;
+ unsigned long idx;
- list_for_each_entry(class, &all_lock_classes, lock_entry) {
+ iterate_lock_classes(idx, class) {
+ if (!test_bit(idx, lock_classes_in_use))
+ continue;
iter->class = class;
iter->stats = lock_stats(class);
iter++;
}
+
data->iter_end = iter;
sort(data->stats, data->iter_end - data->stats,
@@ -643,6 +674,7 @@ static ssize_t lock_stat_write(struct file *file, const char __user *buf,
size_t count, loff_t *ppos)
{
struct lock_class *class;
+ unsigned long idx;
char c;
if (count) {
@@ -652,8 +684,11 @@ static ssize_t lock_stat_write(struct file *file, const char __user *buf,
if (c != '0')
return count;
- list_for_each_entry(class, &all_lock_classes, lock_entry)
+ iterate_lock_classes(idx, class) {
+ if (!test_bit(idx, lock_classes_in_use))
+ continue;
clear_lock_stats(class);
+ }
}
return count;
}
--
2.34.1
From: Arınç ÜNAL <[email protected]>
commit 25e4f5220efead592c83200241e098e757d37e1f upstream.
Fix pinctrl-0 items under the ethernet node to be size-1 items.
Current notation would be used on specifications with non-zero cells.
Fixes: 0a93c0d75809 ("staging: mt7621-dts: fix pinctrl properties for ethernet")
Reported-by: Sander Vanheule <[email protected]>
Signed-off-by: Arınç ÜNAL <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/mt7621-dts/mt7621.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/staging/mt7621-dts/mt7621.dtsi
+++ b/drivers/staging/mt7621-dts/mt7621.dtsi
@@ -413,7 +413,7 @@
mediatek,ethsys = <ðsys>;
pinctrl-names = "default";
- pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
+ pinctrl-0 = <&mdio_pins>, <&rgmii1_pins>, <&rgmii2_pins>;
gmac0: mac@0 {
compatible = "mediatek,eth-mac";
From: Kuldeep Singh <[email protected]>
commit 583d6b0062640def86f3265aa1042ecb6672516e upstream.
Reorder dma and dma-names property for serial node to make it compliant
with bindings.
Fixes: 6e8887f60f60 ("ARM: SPEAr13xx: Pass generic DW DMAC platform data from DT")
Signed-off-by: Kuldeep Singh <[email protected]>
Acked-by: Viresh Kumar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]'
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/boot/dts/spear1340.dtsi | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/arch/arm/boot/dts/spear1340.dtsi
+++ b/arch/arm/boot/dts/spear1340.dtsi
@@ -136,9 +136,9 @@
reg = <0xb4100000 0x1000>;
interrupts = <0 105 0x4>;
status = "disabled";
- dmas = <&dwdma0 12 0 1>,
- <&dwdma0 13 1 0>;
- dma-names = "tx", "rx";
+ dmas = <&dwdma0 13 0 1>,
+ <&dwdma0 12 1 0>;
+ dma-names = "rx", "tx";
};
thermal@e07008c4 {
From: Miaoqian Lin <[email protected]>
[ Upstream commit 5575f7f49134c7386a684335c9007737c606d3b5 ]
The device_node pointer is returned by of_parse_phandle() with refcount
incremented. We should use of_node_put() on it when done.
Fixes: afb93d716533 ("ASoC: SOF: imx: Add i.MX8M HW support")
Signed-off-by: Miaoqian Lin <[email protected]>
Reviewed-by: Peter Ujfalusi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/sof/imx/imx8m.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/sound/soc/sof/imx/imx8m.c b/sound/soc/sof/imx/imx8m.c
index cb822d953767..6943c05273ae 100644
--- a/sound/soc/sof/imx/imx8m.c
+++ b/sound/soc/sof/imx/imx8m.c
@@ -191,6 +191,7 @@ static int imx8m_probe(struct snd_sof_dev *sdev)
}
ret = of_address_to_resource(res_node, 0, &res);
+ of_node_put(res_node);
if (ret) {
dev_err(&pdev->dev, "failed to get reserved region address\n");
goto exit_pdev_unregister;
--
2.34.1
From: Sean Christopherson <[email protected]>
commit 3354ef5a592d219364cf442c2f784ce7ad7629fd upstream.
Explicitly check for present SPTEs when clearing dirty bits in the TDP
MMU. This isn't strictly required for correctness, as setting the dirty
bit in a defunct SPTE will not change the SPTE from !PRESENT to PRESENT.
However, the guarded MMU_WARN_ON() in spte_ad_need_write_protect() would
complain if anyone actually turned on KVM's MMU debugging.
Fixes: a6a0b05da9f3 ("kvm: x86/mmu: Support dirty logging for the TDP MMU")
Cc: Ben Gardon <[email protected]>
Signed-off-by: Sean Christopherson <[email protected]>
Reviewed-by: Ben Gardon <[email protected]>
Message-Id: <[email protected]>
Cc: [email protected]
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kvm/mmu/tdp_mmu.c | 3 +++
1 file changed, 3 insertions(+)
--- a/arch/x86/kvm/mmu/tdp_mmu.c
+++ b/arch/x86/kvm/mmu/tdp_mmu.c
@@ -902,6 +902,9 @@ static bool clear_dirty_gfn_range(struct
if (tdp_mmu_iter_cond_resched(kvm, &iter, false))
continue;
+ if (!is_shadow_present_pte(iter.old_spte))
+ continue;
+
if (spte_ad_need_write_protect(iter.old_spte)) {
if (is_writable_pte(iter.old_spte))
new_spte = iter.old_spte & ~PT_WRITABLE_MASK;
From: Randy Dunlap <[email protected]>
[ Upstream commit 53819a0d97aace1425bb042829e3446952a9e8a9 ]
__setup() handlers should return 1 to indicate that the boot option
has been handled or 0 to indicate that it was not handled.
Add a pr_warn() message if the option value is invalid and then
always return 1.
Link: lore.kernel.org/r/[email protected]
Fixes: 86b40567b917 ("tty: replace strict_strtoul() with kstrtoul()")
Cc: Jingoo Han <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Jiri Slaby <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Julian Wiedmann <[email protected]>
Cc: Vasily Gorbik <[email protected]>
Cc: [email protected]
Reported-by: Igor Zhbanov <[email protected]>
Signed-off-by: Randy Dunlap <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/tty/hvc/hvc_iucv.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/tty/hvc/hvc_iucv.c b/drivers/tty/hvc/hvc_iucv.c
index 2af1e5751bd6..796fbff623f6 100644
--- a/drivers/tty/hvc/hvc_iucv.c
+++ b/drivers/tty/hvc/hvc_iucv.c
@@ -1470,7 +1470,9 @@ static int __init hvc_iucv_init(void)
*/
static int __init hvc_iucv_config(char *val)
{
- return kstrtoul(val, 10, &hvc_iucv_devices);
+ if (kstrtoul(val, 10, &hvc_iucv_devices))
+ pr_warn("hvc_iucv= invalid parameter value '%s'\n", val);
+ return 1;
}
--
2.34.1
From: Xin Xiong <[email protected]>
[ Upstream commit fecbd4a317c95d73c849648c406bcf1b6a0ec1cf ]
The reference counting issue happens in several error handling paths
on a refcounted object "nc->dmac". In these paths, the function simply
returns the error code, forgetting to balance the reference count of
"nc->dmac", increased earlier by dma_request_channel(), which may
cause refcount leaks.
Fix it by decrementing the refcount of specific object in those error
paths.
Fixes: f88fc122cc34 ("mtd: nand: Cleanup/rework the atmel_nand driver")
Co-developed-by: Xiyu Yang <[email protected]>
Signed-off-by: Xiyu Yang <[email protected]>
Co-developed-by: Xin Tan <[email protected]>
Signed-off-by: Xin Tan <[email protected]>
Signed-off-by: Xin Xiong <[email protected]>
Reviewed-by: Claudiu Beznea <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mtd/nand/raw/atmel/nand-controller.c | 14 +++++++++++---
1 file changed, 11 insertions(+), 3 deletions(-)
diff --git a/drivers/mtd/nand/raw/atmel/nand-controller.c b/drivers/mtd/nand/raw/atmel/nand-controller.c
index 8aab1017b460..c048e826746a 100644
--- a/drivers/mtd/nand/raw/atmel/nand-controller.c
+++ b/drivers/mtd/nand/raw/atmel/nand-controller.c
@@ -2057,13 +2057,15 @@ static int atmel_nand_controller_init(struct atmel_nand_controller *nc,
nc->mck = of_clk_get(dev->parent->of_node, 0);
if (IS_ERR(nc->mck)) {
dev_err(dev, "Failed to retrieve MCK clk\n");
- return PTR_ERR(nc->mck);
+ ret = PTR_ERR(nc->mck);
+ goto out_release_dma;
}
np = of_parse_phandle(dev->parent->of_node, "atmel,smc", 0);
if (!np) {
dev_err(dev, "Missing or invalid atmel,smc property\n");
- return -EINVAL;
+ ret = -EINVAL;
+ goto out_release_dma;
}
nc->smc = syscon_node_to_regmap(np);
@@ -2071,10 +2073,16 @@ static int atmel_nand_controller_init(struct atmel_nand_controller *nc,
if (IS_ERR(nc->smc)) {
ret = PTR_ERR(nc->smc);
dev_err(dev, "Could not get SMC regmap (err = %d)\n", ret);
- return ret;
+ goto out_release_dma;
}
return 0;
+
+out_release_dma:
+ if (nc->dmac)
+ dma_release_channel(nc->dmac);
+
+ return ret;
}
static int
--
2.34.1
On Tue, Apr 05, 2022 at 09:24:54AM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.110 release.
> There are 599 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 07 Apr 2022 07:01:33 +0000.
> Anything received after that time might be too late.
>
Build results:
total: 161 pass: 150 fail: 11
Failed builds:
alpha:defconfig
alpha:allmodconfig
csky:defconfig
m68k:defconfig
m68k:allmodconfig
m68k:sun3_defconfig
m68k_nommu:m5475evb_defconfig
microblaze:mmu_defconfig
nds32:defconfig
nds32:allmodconfig
um:defconfig
Qemu test results:
total: 477 pass: 448 fail: 29
Failed tests:
<all alpha>
q800:m68040:mac_defconfig:initrd
q800:m68040:mac_defconfig:rootfs
<all microblaze>
<all s390>
Compile error:
fs/binfmt_elf.c: In function 'fill_note_info':
fs/binfmt_elf.c:2050:45: error: 'siginfo' undeclared (first use in this function)
fs/binfmt_elf.c:2056:53: error: 'regs' undeclared (first use in this function)
s390 tests crashed. Other failed qemu tests did not compile.
[ 7.385841] Unable to handle kernel pointer dereference in virtual kernel address space
[ 7.385946] Failing address: 0000000001002000 TEID: 0000000001002407
[ 7.386007] Fault in home space mode while using kernel ASCE.
[ 7.386610] AS:0000000001874007 R3:000000001ffec007 S:000000001ffe8800 P:000000000100231d
[ 7.387430] Oops: 0004 ilc:3 [#1] SMP
[ 7.387557] Modules linked in:
[ 7.387902] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.10.110-rc1-00600-g45fdcc9dc72a #1
[ 7.387944] Hardware name: QEMU 3906 QEMU (KVM/Linux)
[ 7.388043] Krnl PSW : 0704e00180000000 00000000008f0726 (number+0x25e/0x3c0)
[ 7.388159] R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:2 PM:0 RI:0 EA:3
[ 7.388227] Krnl GPRS: 0000000000000058 0000000001002dc9 0000000000000002 00000000fffffffb
[ 7.388268] 000003e00000bb11 000003e001002dc8 0000000000000000 0000000000000000
[ 7.388309] 0000000000000020 000003e000000001 0000000001002dca 0000000001002dc7
[ 7.388350] 000000000309c100 000003e00000bb10 00000000008f087a 000003e00000ba48
[ 7.388832] Krnl Code: 00000000008f0716: f0c84112b001 srp 274(13,%r4),1(%r11),8
[ 7.388832] 00000000008f071c: 41202001 la %r2,1(%r2)
[ 7.388832] #00000000008f0720: ecab0006c065 clgrj %r10,%r11,12,00000000008f072c
[ 7.388832] >00000000008f0726: d200b0004000 mvc 0(1,%r11),0(%r4)
[ 7.388832] 00000000008f072c: 41b0b001 la %r11,1(%r11)
[ 7.388832] 00000000008f0730: a74bffff aghi %r4,-1
[ 7.388832] 00000000008f0734: a727fff6 brctg %r2,00000000008f0720
[ 7.388832] 00000000008f0738: a73affff ahi %r3,-1
[ 7.389230] Call Trace:
[ 7.389303] [<00000000008f0726>] number+0x25e/0x3c0
[ 7.389351] ([<00000000008f087a>] number+0x3b2/0x3c0)
[ 7.389389] [<00000000008f5bd8>] vsnprintf+0x4b0/0x7c8
[ 7.389425] [<00000000008f5f98>] snprintf+0x40/0x50
[ 7.389464] [<000000000028b0aa>] eval_replace+0x62/0xc0
[ 7.389507] [<000000000028f6f4>] trace_event_eval_update+0x204/0x240
[ 7.389547] [<0000000001413a40>] tracer_init_tracefs+0x168/0x2d0
[ 7.389585] [<0000000000100982>] do_one_initcall+0x72/0x2b0
[ 7.389623] [<0000000001400434>] do_initcalls+0x124/0x148
[ 7.389660] [<00000000014006fe>] kernel_init_freeable+0x226/0x268
[ 7.389699] [<0000000000d6d202>] kernel_init+0x22/0x150
[ 7.389737] [<0000000000d7b858>] ret_from_fork+0x28/0x2c
[ 7.389782] INFO: lockdep is turned off.
[ 7.389822] Last Breaking-Event-Address:
[ 7.389862] [<00000000008f06ec>] number+0x224/0x3c0
[ 7.390089] Kernel panic - not syncing: Fatal exception: panic_on_oops
Guenter
From: Corentin Labbe <[email protected]>
[ Upstream commit f75a749b6d78aeae2ce90e14fcc4b7b3ba46126d ]
Doing ipsec produces a spinlock recursion warning.
This is due to not disabling BH during crypto completion function.
Fixes: 06f751b61329 ("crypto: allwinner - Add sun8i-ce Crypto Engine")
Signed-off-by: Corentin Labbe <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/crypto/allwinner/sun8i-ce/sun8i-ce-cipher.c | 3 +++
drivers/crypto/allwinner/sun8i-ce/sun8i-ce-hash.c | 3 +++
2 files changed, 6 insertions(+)
diff --git a/drivers/crypto/allwinner/sun8i-ce/sun8i-ce-cipher.c b/drivers/crypto/allwinner/sun8i-ce/sun8i-ce-cipher.c
index 33707a2e55ff..64133d4da3d5 100644
--- a/drivers/crypto/allwinner/sun8i-ce/sun8i-ce-cipher.c
+++ b/drivers/crypto/allwinner/sun8i-ce/sun8i-ce-cipher.c
@@ -11,6 +11,7 @@
* You could find a link for the datasheet in Documentation/arm/sunxi.rst
*/
+#include <linux/bottom_half.h>
#include <linux/crypto.h>
#include <linux/dma-mapping.h>
#include <linux/io.h>
@@ -280,7 +281,9 @@ static int sun8i_ce_cipher_run(struct crypto_engine *engine, void *areq)
flow = rctx->flow;
err = sun8i_ce_run_task(ce, flow, crypto_tfm_alg_name(breq->base.tfm));
+ local_bh_disable();
crypto_finalize_skcipher_request(engine, breq, err);
+ local_bh_enable();
return 0;
}
diff --git a/drivers/crypto/allwinner/sun8i-ce/sun8i-ce-hash.c b/drivers/crypto/allwinner/sun8i-ce/sun8i-ce-hash.c
index 4c5a2c11d714..62c07a724d40 100644
--- a/drivers/crypto/allwinner/sun8i-ce/sun8i-ce-hash.c
+++ b/drivers/crypto/allwinner/sun8i-ce/sun8i-ce-hash.c
@@ -9,6 +9,7 @@
*
* You could find the datasheet in Documentation/arm/sunxi.rst
*/
+#include <linux/bottom_half.h>
#include <linux/dma-mapping.h>
#include <linux/pm_runtime.h>
#include <linux/scatterlist.h>
@@ -412,6 +413,8 @@ int sun8i_ce_hash_run(struct crypto_engine *engine, void *breq)
theend:
kfree(buf);
kfree(result);
+ local_bh_disable();
crypto_finalize_hash_request(engine, breq, err);
+ local_bh_enable();
return 0;
}
--
2.34.1
From: Jiasheng Jiang <[email protected]>
[ Upstream commit ca1697eb09208f0168d94b88b72f57505339cbe5 ]
As the potential failure of the clk_enable(),
it should be better to check it and return error
if fails.
Fixes: 3568459a5113 ("ALSA: at73c213: manage SSC clock")
Signed-off-by: Jiasheng Jiang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/spi/at73c213.c | 27 +++++++++++++++++++++------
1 file changed, 21 insertions(+), 6 deletions(-)
diff --git a/sound/spi/at73c213.c b/sound/spi/at73c213.c
index 76c0e37a838c..8a2da6b1012e 100644
--- a/sound/spi/at73c213.c
+++ b/sound/spi/at73c213.c
@@ -218,7 +218,9 @@ static int snd_at73c213_pcm_open(struct snd_pcm_substream *substream)
runtime->hw = snd_at73c213_playback_hw;
chip->substream = substream;
- clk_enable(chip->ssc->clk);
+ err = clk_enable(chip->ssc->clk);
+ if (err)
+ return err;
return 0;
}
@@ -776,7 +778,9 @@ static int snd_at73c213_chip_init(struct snd_at73c213 *chip)
goto out;
/* Enable DAC master clock. */
- clk_enable(chip->board->dac_clk);
+ retval = clk_enable(chip->board->dac_clk);
+ if (retval)
+ goto out;
/* Initialize at73c213 on SPI bus. */
retval = snd_at73c213_write_reg(chip, DAC_RST, 0x04);
@@ -889,7 +893,9 @@ static int snd_at73c213_dev_init(struct snd_card *card,
chip->card = card;
chip->irq = -1;
- clk_enable(chip->ssc->clk);
+ retval = clk_enable(chip->ssc->clk);
+ if (retval)
+ return retval;
retval = request_irq(irq, snd_at73c213_interrupt, 0, "at73c213", chip);
if (retval) {
@@ -1008,7 +1014,9 @@ static int snd_at73c213_remove(struct spi_device *spi)
int retval;
/* Stop playback. */
- clk_enable(chip->ssc->clk);
+ retval = clk_enable(chip->ssc->clk);
+ if (retval)
+ goto out;
ssc_writel(chip->ssc->regs, CR, SSC_BIT(CR_TXDIS));
clk_disable(chip->ssc->clk);
@@ -1088,9 +1096,16 @@ static int snd_at73c213_resume(struct device *dev)
{
struct snd_card *card = dev_get_drvdata(dev);
struct snd_at73c213 *chip = card->private_data;
+ int retval;
- clk_enable(chip->board->dac_clk);
- clk_enable(chip->ssc->clk);
+ retval = clk_enable(chip->board->dac_clk);
+ if (retval)
+ return retval;
+ retval = clk_enable(chip->ssc->clk);
+ if (retval) {
+ clk_disable(chip->board->dac_clk);
+ return retval;
+ }
ssc_writel(chip->ssc->regs, CR, SSC_BIT(CR_TXEN));
return 0;
--
2.34.1
From: Stefano Garzarella <[email protected]>
[ Upstream commit 32f1b53fe8f03d962423ba81f8e92af5839814da ]
virtio_test hangs on __vring_new_virtqueue() because `vqs_list_lock`
is not initialized.
Let's initialize it in vdev_info_init().
Signed-off-by: Stefano Garzarella <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Michael S. Tsirkin <[email protected]>
Acked-by: Jason Wang <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/virtio/virtio_test.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/tools/virtio/virtio_test.c b/tools/virtio/virtio_test.c
index cb3f29c09aff..23f142af544a 100644
--- a/tools/virtio/virtio_test.c
+++ b/tools/virtio/virtio_test.c
@@ -130,6 +130,7 @@ static void vdev_info_init(struct vdev_info* dev, unsigned long long features)
memset(dev, 0, sizeof *dev);
dev->vdev.features = features;
INIT_LIST_HEAD(&dev->vdev.vqs);
+ spin_lock_init(&dev->vdev.vqs_list_lock);
dev->buf_size = 1024;
dev->buf = malloc(dev->buf_size);
assert(dev->buf);
--
2.34.1
From: Quinn Tran <[email protected]>
commit c02aada06d19a215c8291bd968a99a270e96f734 upstream.
User experienced device lost. The log shows Get port data base command was
queued up, failed, and requeued again. Every time it is requeued, it set
the FCF_ASYNC_ACTIVE. This prevents any recovery code from occurring
because driver thinks a recovery is in progress for this session. In
essence, this session is hung. The reason it gets into this place is the
session deletion got in front of this call due to link perturbation.
Break the requeue cycle and exit. The session deletion code will trigger a
session relogin.
Link: https://lore.kernel.org/r/[email protected]
Fixes: 726b85487067 ("qla2xxx: Add framework for async fabric discovery")
Cc: [email protected]
Reviewed-by: Himanshu Madhani <[email protected]>
Signed-off-by: Quinn Tran <[email protected]>
Signed-off-by: Nilesh Javali <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/qla2xxx/qla_def.h | 4 ++++
drivers/scsi/qla2xxx/qla_init.c | 19 +++++++++++++++++--
2 files changed, 21 insertions(+), 2 deletions(-)
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -5175,4 +5175,8 @@ struct sff_8247_a0 {
#include "qla_gbl.h"
#include "qla_dbg.h"
#include "qla_inline.h"
+
+#define IS_SESSION_DELETED(_fcport) (_fcport->disc_state == DSC_DELETE_PEND || \
+ _fcport->disc_state == DSC_DELETED)
+
#endif
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -570,6 +570,14 @@ qla2x00_async_adisc(struct scsi_qla_host
struct srb_iocb *lio;
int rval = QLA_FUNCTION_FAILED;
+ if (IS_SESSION_DELETED(fcport)) {
+ ql_log(ql_log_warn, vha, 0xffff,
+ "%s: %8phC is being delete - not sending command.\n",
+ __func__, fcport->port_name);
+ fcport->flags &= ~FCF_ASYNC_ACTIVE;
+ return rval;
+ }
+
if (!vha->flags.online || (fcport->flags & FCF_ASYNC_SENT))
return rval;
@@ -1316,8 +1324,15 @@ int qla24xx_async_gpdb(struct scsi_qla_h
struct port_database_24xx *pd;
struct qla_hw_data *ha = vha->hw;
- if (!vha->flags.online || (fcport->flags & FCF_ASYNC_SENT) ||
- fcport->loop_id == FC_NO_LOOP_ID) {
+ if (IS_SESSION_DELETED(fcport)) {
+ ql_log(ql_log_warn, vha, 0xffff,
+ "%s: %8phC is being delete - not sending command.\n",
+ __func__, fcport->port_name);
+ fcport->flags &= ~FCF_ASYNC_ACTIVE;
+ return rval;
+ }
+
+ if (!vha->flags.online || fcport->flags & FCF_ASYNC_SENT) {
ql_log(ql_log_warn, vha, 0xffff,
"%s: %8phC online %d flags %x - not sending command.\n",
__func__, fcport->port_name, vha->flags.online, fcport->flags);
From: Lorenzo Bianconi <[email protected]>
[ Upstream commit abdb8bc94be4cf68aa71c9a8ee0bad9b3e6f52d3 ]
Similar to mt7915_mcu_wtbl_generic_tlv, rely on vif->bss_conf.aid for
aid in sta mode and not on sta->aid.
Fixes: e57b7901469fc ("mt76: add mac80211 driver for MT7915 PCIe-based chipsets")
Signed-off-by: Lorenzo Bianconi <[email protected]>
Signed-off-by: Felix Fietkau <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/mediatek/mt76/mt7915/mcu.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
index 6e73964b8b0a..41054ee43dbf 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
@@ -1317,12 +1317,15 @@ mt7915_mcu_sta_basic_tlv(struct sk_buff *skb, struct ieee80211_vif *vif,
case NL80211_IFTYPE_MESH_POINT:
case NL80211_IFTYPE_AP:
basic->conn_type = cpu_to_le32(CONNECTION_INFRA_STA);
+ basic->aid = cpu_to_le16(sta->aid);
break;
case NL80211_IFTYPE_STATION:
basic->conn_type = cpu_to_le32(CONNECTION_INFRA_AP);
+ basic->aid = cpu_to_le16(vif->bss_conf.aid);
break;
case NL80211_IFTYPE_ADHOC:
basic->conn_type = cpu_to_le32(CONNECTION_IBSS_ADHOC);
+ basic->aid = cpu_to_le16(sta->aid);
break;
default:
WARN_ON(1);
@@ -1330,7 +1333,6 @@ mt7915_mcu_sta_basic_tlv(struct sk_buff *skb, struct ieee80211_vif *vif,
}
memcpy(basic->peer_addr, sta->addr, ETH_ALEN);
- basic->aid = cpu_to_le16(sta->aid);
basic->qos = sta->wme;
}
--
2.34.1
On Tue, 5 Apr 2022 23:08:12 -0400
Steven Rostedt <[email protected]> wrote:
> Here's a thought, if you decide to backport a patch to stable, and you see
> that there's another commit with a "Fixes" tag to the automatically
> selected commit. DO NOT BACKPORT IF THE FIXES PATCH FAILS TO GO BACK TOO!
Seriously. This should be the case for *all* backported patches, not just
the AUTOSEL ones.
Otherwise you are backporting a commit to "stable" that is KNOWN TO BE
BROKEN!
-- Steve
From: Jiasheng Jiang <[email protected]>
[ Upstream commit 44ab30b056149bd59dd7989a593dd25ead6007fd ]
Because of the possible failure of the dma_supported(), the
dma_set_mask_and_coherent() may return error num.
Therefore, it should be better to check it and return the error if
fails.
Fixes: f3ba91228e8e ("drm/panfrost: Add initial panfrost driver")
Signed-off-by: Jiasheng Jiang <[email protected]>
[Steve: fix Fixes: line]
Reviewed-by: Steven Price <[email protected]>
Signed-off-by: Steven Price <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/panfrost/panfrost_gpu.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/panfrost/panfrost_gpu.c b/drivers/gpu/drm/panfrost/panfrost_gpu.c
index 2aae636f1cf5..107ad2d764ec 100644
--- a/drivers/gpu/drm/panfrost/panfrost_gpu.c
+++ b/drivers/gpu/drm/panfrost/panfrost_gpu.c
@@ -359,8 +359,11 @@ int panfrost_gpu_init(struct panfrost_device *pfdev)
panfrost_gpu_init_features(pfdev);
- dma_set_mask_and_coherent(pfdev->dev,
+ err = dma_set_mask_and_coherent(pfdev->dev,
DMA_BIT_MASK(FIELD_GET(0xff00, pfdev->features.mmu_features)));
+ if (err)
+ return err;
+
dma_set_max_seg_size(pfdev->dev, UINT_MAX);
irq = platform_get_irq_byname(to_platform_device(pfdev->dev), "gpu");
--
2.34.1
On Tue, 5 Apr 2022 19:30:25 -0700
Guenter Roeck <[email protected]> wrote:
> > s390 tests crashed. Other failed qemu tests did not compile.
>
> Bisect points to commit 93fe2389e6fd ("tracing: Have TRACE_DEFINE_ENUM
> affect trace event types as well"). Bisect log attached. Reverting the
> offending patch fixes the problem. Copying Steven for comments/input.
Do you have this commit?
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=795301d3c2899
-- Steve
On Wed, Apr 06, 2022 at 10:23:01AM +0200, Greg Kroah-Hartman wrote:
> On Wed, Apr 06, 2022 at 10:11:29AM +0200, Greg Kroah-Hartman wrote:
> > On Tue, Apr 05, 2022 at 11:24:13PM -0400, Steven Rostedt wrote:
> > > On Tue, 5 Apr 2022 23:08:12 -0400
> > > Steven Rostedt <[email protected]> wrote:
> > >
> > > > Here's a thought, if you decide to backport a patch to stable, and you see
> > > > that there's another commit with a "Fixes" tag to the automatically
> > > > selected commit. DO NOT BACKPORT IF THE FIXES PATCH FAILS TO GO BACK TOO!
> > >
> > > Seriously. This should be the case for *all* backported patches, not just
> > > the AUTOSEL ones.
> > >
> > > Otherwise you are backporting a commit to "stable" that is KNOWN TO BE
> > > BROKEN!
> >
> > My scripts usually do catch this, let me go see what went wrong...
>
> Ok, my fault, my scripts _did_ catch this, but I ignored it as it was
> filled with other noise. I've now queued this commit up.
>
> thanks for catching this and sorry for missing it the first time around.
Wait, no, I did catch this! And I sent you a "FAILED" email about it, 4
of them:
https://lore.kernel.org/r/[email protected]
https://lore.kernel.org/r/[email protected]
https://lore.kernel.org/r/[email protected]
https://lore.kernel.org/r/[email protected]
as the commit applied, but broke the build:
kernel/trace/trace_events.c: In function ‘update_event_fields’:
kernel/trace/trace_events.c:2459:40: error: ‘TRACE_EVENT_FL_DYNAMIC’ undeclared (first use in this function); did you mean ‘FTRACE_OPS_FL_DYNAMIC’?
2459 | if (WARN_ON_ONCE(call->flags & TRACE_EVENT_FL_DYNAMIC))
| ^~~~~~~~~~~~~~~~~~~~~~
./include/asm-generic/bug.h:102:32: note: in definition of macro ‘WARN_ON_ONCE’
102 | int __ret_warn_on = !!(condition); \
| ^~~~~~~~~
kernel/trace/trace_events.c:2459:40: note: each undeclared identifier is reported only once for each function it appears in
2459 | if (WARN_ON_ONCE(call->flags & TRACE_EVENT_FL_DYNAMIC))
| ^~~~~~~~~~~~~~~~~~~~~~
./include/asm-generic/bug.h:102:32: note: in definition of macro ‘WARN_ON_ONCE’
102 | int __ret_warn_on = !!(condition); \
| ^~~~~~~~~
kernel/trace/trace_events.c:2491:25: error: ‘struct trace_event_call’ has no member named ‘module’
2491 | if (call->module)
| ^~
kernel/trace/trace_events.c:2492:47: error: ‘struct trace_event_call’ has no member named ‘module’
2492 | add_str_to_module(call->module, str);
| ^~
But I didn't drop the offending commit, I should have done that.
I'll go and drop the offending commit here, if you could submit both of
them as working backports to stable@vger if/when you want them queued up
there, that would be great.
thanks,
greg k-h
From: Robert Hancock <[email protected]>
[ Upstream commit 7a7d340ba4d9351e4c8847b898a2b996727a922a ]
If a memory allocation error occurred during an attempt to refill a slot
in the RX ring after the packet was received, the hardware tail pointer
would still have been updated to point to or past the slot which remained
marked as previously completed. This would likely result in the DMA engine
raising an error when it eventually tried to use that slot again.
If a slot cannot be refilled, then just stop processing and do not move
the tail pointer past it. On the next attempt, we should skip receiving
the packet from the empty slot and just try to refill it again.
This failure mode has not actually been observed, but was found as part
of other driver updates.
Fixes: 8a3b7a252dca ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Robert Hancock <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../net/ethernet/xilinx/xilinx_axienet_main.c | 72 +++++++++++--------
1 file changed, 42 insertions(+), 30 deletions(-)
diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
index 0baf85122f5a..bbdcba88c021 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -857,46 +857,53 @@ static void axienet_recv(struct net_device *ndev)
while ((cur_p->status & XAXIDMA_BD_STS_COMPLETE_MASK)) {
dma_addr_t phys;
- tail_p = lp->rx_bd_p + sizeof(*lp->rx_bd_v) * lp->rx_bd_ci;
-
/* Ensure we see complete descriptor update */
dma_rmb();
- phys = desc_get_phys_addr(lp, cur_p);
- dma_unmap_single(ndev->dev.parent, phys, lp->max_frm_size,
- DMA_FROM_DEVICE);
skb = cur_p->skb;
cur_p->skb = NULL;
- length = cur_p->app4 & 0x0000FFFF;
-
- skb_put(skb, length);
- skb->protocol = eth_type_trans(skb, ndev);
- /*skb_checksum_none_assert(skb);*/
- skb->ip_summed = CHECKSUM_NONE;
-
- /* if we're doing Rx csum offload, set it up */
- if (lp->features & XAE_FEATURE_FULL_RX_CSUM) {
- csumstatus = (cur_p->app2 &
- XAE_FULL_CSUM_STATUS_MASK) >> 3;
- if ((csumstatus == XAE_IP_TCP_CSUM_VALIDATED) ||
- (csumstatus == XAE_IP_UDP_CSUM_VALIDATED)) {
- skb->ip_summed = CHECKSUM_UNNECESSARY;
+
+ /* skb could be NULL if a previous pass already received the
+ * packet for this slot in the ring, but failed to refill it
+ * with a newly allocated buffer. In this case, don't try to
+ * receive it again.
+ */
+ if (likely(skb)) {
+ length = cur_p->app4 & 0x0000FFFF;
+
+ phys = desc_get_phys_addr(lp, cur_p);
+ dma_unmap_single(ndev->dev.parent, phys, lp->max_frm_size,
+ DMA_FROM_DEVICE);
+
+ skb_put(skb, length);
+ skb->protocol = eth_type_trans(skb, ndev);
+ /*skb_checksum_none_assert(skb);*/
+ skb->ip_summed = CHECKSUM_NONE;
+
+ /* if we're doing Rx csum offload, set it up */
+ if (lp->features & XAE_FEATURE_FULL_RX_CSUM) {
+ csumstatus = (cur_p->app2 &
+ XAE_FULL_CSUM_STATUS_MASK) >> 3;
+ if (csumstatus == XAE_IP_TCP_CSUM_VALIDATED ||
+ csumstatus == XAE_IP_UDP_CSUM_VALIDATED) {
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+ }
+ } else if ((lp->features & XAE_FEATURE_PARTIAL_RX_CSUM) != 0 &&
+ skb->protocol == htons(ETH_P_IP) &&
+ skb->len > 64) {
+ skb->csum = be32_to_cpu(cur_p->app3 & 0xFFFF);
+ skb->ip_summed = CHECKSUM_COMPLETE;
}
- } else if ((lp->features & XAE_FEATURE_PARTIAL_RX_CSUM) != 0 &&
- skb->protocol == htons(ETH_P_IP) &&
- skb->len > 64) {
- skb->csum = be32_to_cpu(cur_p->app3 & 0xFFFF);
- skb->ip_summed = CHECKSUM_COMPLETE;
- }
- netif_rx(skb);
+ netif_rx(skb);
- size += length;
- packets++;
+ size += length;
+ packets++;
+ }
new_skb = netdev_alloc_skb_ip_align(ndev, lp->max_frm_size);
if (!new_skb)
- return;
+ break;
phys = dma_map_single(ndev->dev.parent, new_skb->data,
lp->max_frm_size,
@@ -905,7 +912,7 @@ static void axienet_recv(struct net_device *ndev)
if (net_ratelimit())
netdev_err(ndev, "RX DMA mapping error\n");
dev_kfree_skb(new_skb);
- return;
+ break;
}
desc_set_phys_addr(lp, phys, cur_p);
@@ -913,6 +920,11 @@ static void axienet_recv(struct net_device *ndev)
cur_p->status = 0;
cur_p->skb = new_skb;
+ /* Only update tail_p to mark this slot as usable after it has
+ * been successfully refilled.
+ */
+ tail_p = lp->rx_bd_p + sizeof(*lp->rx_bd_v) * lp->rx_bd_ci;
+
if (++lp->rx_bd_ci >= lp->rx_bd_num)
lp->rx_bd_ci = 0;
cur_p = &lp->rx_bd_v[lp->rx_bd_ci];
--
2.34.1
On 4/5/22 19:52, Steven Rostedt wrote:
> On Tue, 5 Apr 2022 19:30:25 -0700
> Guenter Roeck <[email protected]> wrote:
>
>>> s390 tests crashed. Other failed qemu tests did not compile.
>>
>> Bisect points to commit 93fe2389e6fd ("tracing: Have TRACE_DEFINE_ENUM
>> affect trace event types as well"). Bisect log attached. Reverting the
>> offending patch fixes the problem. Copying Steven for comments/input.
>
> Do you have this commit?
>
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=795301d3c2899
>
No, It applies, but doesn't compile.
kernel/trace/trace_events.c: In function 'update_event_fields':
kernel/trace/trace_events.c:2459:40: error: 'TRACE_EVENT_FL_DYNAMIC' undeclared
TRACE_EVENT_FL_DYNAMIC is not defined in v5.10.y.
Guenter
From: Randy Dunlap <[email protected]>
commit 8b2360c7157b462c4870d447d1e65d30ef31f9aa upstream.
__setup() handlers should return 1 to obsolete_checksetup() in
init/main.c to indicate that the boot option has been handled.
A return of 0 causes the boot option/value to be listed as an Unknown
kernel parameter and added to init's (limited) argument or environment
strings. Also, error return codes don't mean anything to
obsolete_checksetup() -- only non-zero (usually 1) or zero.
So return 1 from jive_mtdset().
Fixes: 9db829f485c5 ("[ARM] JIVE: Initial machine support for Logitech Jive")
Signed-off-by: Randy Dunlap <[email protected]>
Cc: Ben Dooks <[email protected]>
Cc: Krzysztof Kozlowski <[email protected]>
Cc: Alim Akhtar <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Russell King (Oracle) <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/mach-s3c/mach-jive.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/arch/arm/mach-s3c/mach-jive.c
+++ b/arch/arm/mach-s3c/mach-jive.c
@@ -236,11 +236,11 @@ static int __init jive_mtdset(char *opti
unsigned long set;
if (options == NULL || options[0] == '\0')
- return 0;
+ return 1;
if (kstrtoul(options, 10, &set)) {
printk(KERN_ERR "failed to parse mtdset=%s\n", options);
- return 0;
+ return 1;
}
switch (set) {
@@ -255,7 +255,7 @@ static int __init jive_mtdset(char *opti
"using default.", set);
}
- return 0;
+ return 1;
}
/* parse the mtdset= option given to the kernel command line */
On Tue, Apr 05, 2022 at 11:24:13PM -0400, Steven Rostedt wrote:
> On Tue, 5 Apr 2022 23:08:12 -0400
> Steven Rostedt <[email protected]> wrote:
>
> > Here's a thought, if you decide to backport a patch to stable, and you see
> > that there's another commit with a "Fixes" tag to the automatically
> > selected commit. DO NOT BACKPORT IF THE FIXES PATCH FAILS TO GO BACK TOO!
>
> Seriously. This should be the case for *all* backported patches, not just
> the AUTOSEL ones.
>
> Otherwise you are backporting a commit to "stable" that is KNOWN TO BE
> BROKEN!
My scripts usually do catch this, let me go see what went wrong...
From: Kuldeep Singh <[email protected]>
commit 31d3687d6017c7ce6061695361598d9cda70807a upstream.
Reorder dmas and dma-names property for spi controller node to make it
compliant with bindings.
Fixes: 6e8887f60f60 ("ARM: SPEAr13xx: Pass generic DW DMAC platform data from DT")
Signed-off-by: Kuldeep Singh <[email protected]>
Acked-by: Viresh Kumar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]'
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/boot/dts/spear13xx.dtsi | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/arch/arm/boot/dts/spear13xx.dtsi
+++ b/arch/arm/boot/dts/spear13xx.dtsi
@@ -284,9 +284,9 @@
#size-cells = <0>;
interrupts = <0 31 0x4>;
status = "disabled";
- dmas = <&dwdma0 4 0 0>,
- <&dwdma0 5 0 0>;
- dma-names = "tx", "rx";
+ dmas = <&dwdma0 5 0 0>,
+ <&dwdma0 4 0 0>;
+ dma-names = "rx", "tx";
};
rtc@e0580000 {
From: Richard Haines <[email protected]>
[ Upstream commit 65881e1db4e948614d9eb195b8e1197339822949 ]
These ioctls are equivalent to fcntl(fd, F_SETFD, flags), which SELinux
always allows too. Furthermore, a failed FIOCLEX could result in a file
descriptor being leaked to a process that should not have access to it.
As this patch removes access controls, a policy capability needs to be
enabled in policy to always allow these ioctls.
Based-on-patch-by: Demi Marie Obenour <[email protected]>
Signed-off-by: Richard Haines <[email protected]>
[PM: subject line tweak]
Signed-off-by: Paul Moore <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
security/selinux/hooks.c | 6 ++++++
security/selinux/include/policycap.h | 1 +
security/selinux/include/policycap_names.h | 3 ++-
security/selinux/include/security.h | 7 +++++++
4 files changed, 16 insertions(+), 1 deletion(-)
diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c
index 63e61f2f1ad6..8c901ae05dd8 100644
--- a/security/selinux/hooks.c
+++ b/security/selinux/hooks.c
@@ -3647,6 +3647,12 @@ static int selinux_file_ioctl(struct file *file, unsigned int cmd,
CAP_OPT_NONE, true);
break;
+ case FIOCLEX:
+ case FIONCLEX:
+ if (!selinux_policycap_ioctl_skip_cloexec())
+ error = ioctl_has_perm(cred, file, FILE__IOCTL, (u16) cmd);
+ break;
+
/* default case assumes that the command will go
* to the file's ioctl() function.
*/
diff --git a/security/selinux/include/policycap.h b/security/selinux/include/policycap.h
index 2ec038efbb03..a9e572ca4fd9 100644
--- a/security/selinux/include/policycap.h
+++ b/security/selinux/include/policycap.h
@@ -11,6 +11,7 @@ enum {
POLICYDB_CAPABILITY_CGROUPSECLABEL,
POLICYDB_CAPABILITY_NNP_NOSUID_TRANSITION,
POLICYDB_CAPABILITY_GENFS_SECLABEL_SYMLINKS,
+ POLICYDB_CAPABILITY_IOCTL_SKIP_CLOEXEC,
__POLICYDB_CAPABILITY_MAX
};
#define POLICYDB_CAPABILITY_MAX (__POLICYDB_CAPABILITY_MAX - 1)
diff --git a/security/selinux/include/policycap_names.h b/security/selinux/include/policycap_names.h
index b89289f092c9..ebd64afe1def 100644
--- a/security/selinux/include/policycap_names.h
+++ b/security/selinux/include/policycap_names.h
@@ -12,7 +12,8 @@ const char *selinux_policycap_names[__POLICYDB_CAPABILITY_MAX] = {
"always_check_network",
"cgroup_seclabel",
"nnp_nosuid_transition",
- "genfs_seclabel_symlinks"
+ "genfs_seclabel_symlinks",
+ "ioctl_skip_cloexec"
};
#endif /* _SELINUX_POLICYCAP_NAMES_H_ */
diff --git a/security/selinux/include/security.h b/security/selinux/include/security.h
index 63ca6e79daeb..1521460a97d4 100644
--- a/security/selinux/include/security.h
+++ b/security/selinux/include/security.h
@@ -219,6 +219,13 @@ static inline bool selinux_policycap_genfs_seclabel_symlinks(void)
return READ_ONCE(state->policycap[POLICYDB_CAPABILITY_GENFS_SECLABEL_SYMLINKS]);
}
+static inline bool selinux_policycap_ioctl_skip_cloexec(void)
+{
+ struct selinux_state *state = &selinux_state;
+
+ return READ_ONCE(state->policycap[POLICYDB_CAPABILITY_IOCTL_SKIP_CLOEXEC]);
+}
+
struct selinux_policy_convert_data;
struct selinux_load_state {
--
2.34.1
From: Oliver Hartkopp <[email protected]>
[ Upstream commit 259bdba27e32368b4404f69d613b1c1014c07cbf ]
The vxcan driver provides a pair of virtual CAN interfaces to exchange
CAN traffic between different namespaces - analogue to veth.
In opposite to the vcan driver the local sent CAN traffic on this interface
is not echo'ed back but only sent to the remote peer. This is unusual and
can be easily fixed by removing IFF_ECHO from the netdevice flags that
are set for vxcan interfaces by default at startup.
Without IFF_ECHO set on driver level, the local sent CAN frames are echo'ed
in af_can.c in can_send(). This patch makes vxcan interfaces adopt the
same local echo behavior and procedures as known from the vcan interfaces.
Fixes: a8f820a380a2 ("can: add Virtual CAN Tunnel driver (vxcan)")
Link: https://lore.kernel.org/all/[email protected]
Signed-off-by: Oliver Hartkopp <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/can/vxcan.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/can/vxcan.c b/drivers/net/can/vxcan.c
index 7000c6cd1e48..282c53ef76d2 100644
--- a/drivers/net/can/vxcan.c
+++ b/drivers/net/can/vxcan.c
@@ -148,7 +148,7 @@ static void vxcan_setup(struct net_device *dev)
dev->hard_header_len = 0;
dev->addr_len = 0;
dev->tx_queue_len = 0;
- dev->flags = (IFF_NOARP|IFF_ECHO);
+ dev->flags = IFF_NOARP;
dev->netdev_ops = &vxcan_netdev_ops;
dev->needs_free_netdev = true;
--
2.34.1
From: Chen-Yu Tsai <[email protected]>
[ Upstream commit 8310ca94075e784bbb06593cd6c068ee6b6e4ca6 ]
DST_QUEUE_OFF_BASE is applied to offset/mem_offset on MMAP capture buffers
only for the VIDIOC_QUERYBUF ioctl, while the userspace fields (including
offset/mem_offset) are filled in for VIDIOC_{QUERY,PREPARE,Q,DQ}BUF
ioctls. This leads to differences in the values presented to userspace.
If userspace attempts to mmap the capture buffer directly using values
from DQBUF, it will fail.
Move the code that applies the magic offset into a helper, and call
that helper from all four ioctl entry points.
[hverkuil: drop unnecessary '= 0' in v4l2_m2m_querybuf() for ret]
Fixes: 7f98639def42 ("V4L/DVB: add memory-to-memory device helper framework for videobuf")
Fixes: 908a0d7c588e ("[media] v4l: mem2mem: port to videobuf2")
Signed-off-by: Chen-Yu Tsai <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/v4l2-core/v4l2-mem2mem.c | 53 ++++++++++++++++++++------
1 file changed, 41 insertions(+), 12 deletions(-)
diff --git a/drivers/media/v4l2-core/v4l2-mem2mem.c b/drivers/media/v4l2-core/v4l2-mem2mem.c
index b221b4e438a1..73190652c267 100644
--- a/drivers/media/v4l2-core/v4l2-mem2mem.c
+++ b/drivers/media/v4l2-core/v4l2-mem2mem.c
@@ -585,19 +585,14 @@ int v4l2_m2m_reqbufs(struct file *file, struct v4l2_m2m_ctx *m2m_ctx,
}
EXPORT_SYMBOL_GPL(v4l2_m2m_reqbufs);
-int v4l2_m2m_querybuf(struct file *file, struct v4l2_m2m_ctx *m2m_ctx,
- struct v4l2_buffer *buf)
+static void v4l2_m2m_adjust_mem_offset(struct vb2_queue *vq,
+ struct v4l2_buffer *buf)
{
- struct vb2_queue *vq;
- int ret = 0;
- unsigned int i;
-
- vq = v4l2_m2m_get_vq(m2m_ctx, buf->type);
- ret = vb2_querybuf(vq, buf);
-
/* Adjust MMAP memory offsets for the CAPTURE queue */
if (buf->memory == V4L2_MEMORY_MMAP && V4L2_TYPE_IS_CAPTURE(vq->type)) {
if (V4L2_TYPE_IS_MULTIPLANAR(vq->type)) {
+ unsigned int i;
+
for (i = 0; i < buf->length; ++i)
buf->m.planes[i].m.mem_offset
+= DST_QUEUE_OFF_BASE;
@@ -605,8 +600,23 @@ int v4l2_m2m_querybuf(struct file *file, struct v4l2_m2m_ctx *m2m_ctx,
buf->m.offset += DST_QUEUE_OFF_BASE;
}
}
+}
- return ret;
+int v4l2_m2m_querybuf(struct file *file, struct v4l2_m2m_ctx *m2m_ctx,
+ struct v4l2_buffer *buf)
+{
+ struct vb2_queue *vq;
+ int ret;
+
+ vq = v4l2_m2m_get_vq(m2m_ctx, buf->type);
+ ret = vb2_querybuf(vq, buf);
+ if (ret)
+ return ret;
+
+ /* Adjust MMAP memory offsets for the CAPTURE queue */
+ v4l2_m2m_adjust_mem_offset(vq, buf);
+
+ return 0;
}
EXPORT_SYMBOL_GPL(v4l2_m2m_querybuf);
@@ -763,6 +773,9 @@ int v4l2_m2m_qbuf(struct file *file, struct v4l2_m2m_ctx *m2m_ctx,
if (ret)
return ret;
+ /* Adjust MMAP memory offsets for the CAPTURE queue */
+ v4l2_m2m_adjust_mem_offset(vq, buf);
+
/*
* If the capture queue is streaming, but streaming hasn't started
* on the device, but was asked to stop, mark the previously queued
@@ -784,9 +797,17 @@ int v4l2_m2m_dqbuf(struct file *file, struct v4l2_m2m_ctx *m2m_ctx,
struct v4l2_buffer *buf)
{
struct vb2_queue *vq;
+ int ret;
vq = v4l2_m2m_get_vq(m2m_ctx, buf->type);
- return vb2_dqbuf(vq, buf, file->f_flags & O_NONBLOCK);
+ ret = vb2_dqbuf(vq, buf, file->f_flags & O_NONBLOCK);
+ if (ret)
+ return ret;
+
+ /* Adjust MMAP memory offsets for the CAPTURE queue */
+ v4l2_m2m_adjust_mem_offset(vq, buf);
+
+ return 0;
}
EXPORT_SYMBOL_GPL(v4l2_m2m_dqbuf);
@@ -795,9 +816,17 @@ int v4l2_m2m_prepare_buf(struct file *file, struct v4l2_m2m_ctx *m2m_ctx,
{
struct video_device *vdev = video_devdata(file);
struct vb2_queue *vq;
+ int ret;
vq = v4l2_m2m_get_vq(m2m_ctx, buf->type);
- return vb2_prepare_buf(vq, vdev->v4l2_dev->mdev, buf);
+ ret = vb2_prepare_buf(vq, vdev->v4l2_dev->mdev, buf);
+ if (ret)
+ return ret;
+
+ /* Adjust MMAP memory offsets for the CAPTURE queue */
+ v4l2_m2m_adjust_mem_offset(vq, buf);
+
+ return 0;
}
EXPORT_SYMBOL_GPL(v4l2_m2m_prepare_buf);
--
2.34.1
From: Felix Maurer <[email protected]>
[ Upstream commit d23a8720327d33616f584d76c80824bfa4699be6 ]
In test_lwt_ip_encap, the ingress IPv6 encap test failed from time to
time. The failure occured when an IPv4 ping through the IPv6 GRE
encapsulation did not receive a reply within the timeout. The IPv4 ping
and the IPv6 ping in the test used different timeouts (1 sec for IPv4
and 6 sec for IPv6), probably taking into account that IPv6 might need
longer to successfully complete. However, when IPv4 pings (with the
short timeout) are encapsulated into the IPv6 tunnel, the delays of IPv6
apply.
The actual reason for the long delays with IPv6 was that the IPv6
neighbor discovery sometimes did not complete in time. This was caused
by the outgoing interface only having a tentative link local address,
i.e., not having completed DAD for that lladdr. The ND was successfully
retried after 1 sec but that was too late for the ping timeout.
The IPv6 addresses for the test were already added with nodad. However,
for the lladdrs, DAD was still performed. We now disable DAD in the test
netns completely and just assume that the two lladdrs on each veth pair
do not collide. This removes all the delays for IPv6 traffic in the
test.
Without the delays, we can now also reduce the delay of the IPv6 ping to
1 sec. This makes the whole test complete faster because we don't need
to wait for the excessive timeout for each IPv6 ping that is supposed
to fail.
Fixes: 0fde56e4385b0 ("selftests: bpf: add test_lwt_ip_encap selftest")
Signed-off-by: Felix Maurer <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/4987d549d48b4e316cd5b3936de69c8d4bc75a4f.1646305899.git.fmaurer@redhat.com
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/bpf/test_lwt_ip_encap.sh | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/tools/testing/selftests/bpf/test_lwt_ip_encap.sh b/tools/testing/selftests/bpf/test_lwt_ip_encap.sh
index b497bb85b667..6c69c42b1d60 100755
--- a/tools/testing/selftests/bpf/test_lwt_ip_encap.sh
+++ b/tools/testing/selftests/bpf/test_lwt_ip_encap.sh
@@ -120,6 +120,14 @@ setup()
ip netns exec ${NS2} sysctl -wq net.ipv4.conf.default.rp_filter=0
ip netns exec ${NS3} sysctl -wq net.ipv4.conf.default.rp_filter=0
+ # disable IPv6 DAD because it sometimes takes too long and fails tests
+ ip netns exec ${NS1} sysctl -wq net.ipv6.conf.all.accept_dad=0
+ ip netns exec ${NS2} sysctl -wq net.ipv6.conf.all.accept_dad=0
+ ip netns exec ${NS3} sysctl -wq net.ipv6.conf.all.accept_dad=0
+ ip netns exec ${NS1} sysctl -wq net.ipv6.conf.default.accept_dad=0
+ ip netns exec ${NS2} sysctl -wq net.ipv6.conf.default.accept_dad=0
+ ip netns exec ${NS3} sysctl -wq net.ipv6.conf.default.accept_dad=0
+
ip link add veth1 type veth peer name veth2
ip link add veth3 type veth peer name veth4
ip link add veth5 type veth peer name veth6
@@ -289,7 +297,7 @@ test_ping()
ip netns exec ${NS1} ping -c 1 -W 1 -I veth1 ${IPv4_DST} 2>&1 > /dev/null
RET=$?
elif [ "${PROTO}" == "IPv6" ] ; then
- ip netns exec ${NS1} ping6 -c 1 -W 6 -I veth1 ${IPv6_DST} 2>&1 > /dev/null
+ ip netns exec ${NS1} ping6 -c 1 -W 1 -I veth1 ${IPv6_DST} 2>&1 > /dev/null
RET=$?
else
echo " test_ping: unknown PROTO: ${PROTO}"
--
2.34.1
From: Eric W. Biederman <[email protected]>
commit 95c5436a4883841588dae86fb0b9325f47ba5ad3 upstream.
Move the call of dump_vma_snapshot and kvfree(vma_meta) out of the
individual coredump routines into do_coredump itself. This makes
the code less error prone and easier to maintain.
Make the vma snapshot available to the coredump routines
in struct coredump_params. This makes it easier to
change and update what is captures in the vma snapshot
and will be needed for fixing fill_file_notes.
Reviewed-by: Jann Horn <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Signed-off-by: "Eric W. Biederman" <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/binfmt_elf.c | 20 +++++++-------------
fs/binfmt_elf_fdpic.c | 18 ++++++------------
fs/coredump.c | 41 +++++++++++++++++++++++------------------
include/linux/binfmts.h | 3 +++
include/linux/coredump.h | 3 ---
5 files changed, 39 insertions(+), 46 deletions(-)
--- a/fs/binfmt_elf.c
+++ b/fs/binfmt_elf.c
@@ -2166,8 +2166,7 @@ static void fill_extnum_info(struct elfh
static int elf_core_dump(struct coredump_params *cprm)
{
int has_dumped = 0;
- int vma_count, segs, i;
- size_t vma_data_size;
+ int segs, i;
struct elfhdr elf;
loff_t offset = 0, dataoff;
struct elf_note_info info = { };
@@ -2175,16 +2174,12 @@ static int elf_core_dump(struct coredump
struct elf_shdr *shdr4extnum = NULL;
Elf_Half e_phnum;
elf_addr_t e_shoff;
- struct core_vma_metadata *vma_meta;
-
- if (dump_vma_snapshot(cprm, &vma_count, &vma_meta, &vma_data_size))
- return 0;
/*
* The number of segs are recored into ELF header as 16bit value.
* Please check DEFAULT_MAX_MAP_COUNT definition when you modify here.
*/
- segs = vma_count + elf_core_extra_phdrs();
+ segs = cprm->vma_count + elf_core_extra_phdrs();
/* for notes section */
segs++;
@@ -2222,7 +2217,7 @@ static int elf_core_dump(struct coredump
dataoff = offset = roundup(offset, ELF_EXEC_PAGESIZE);
- offset += vma_data_size;
+ offset += cprm->vma_data_size;
offset += elf_core_extra_data_size();
e_shoff = offset;
@@ -2242,8 +2237,8 @@ static int elf_core_dump(struct coredump
goto end_coredump;
/* Write program headers for segments dump */
- for (i = 0; i < vma_count; i++) {
- struct core_vma_metadata *meta = vma_meta + i;
+ for (i = 0; i < cprm->vma_count; i++) {
+ struct core_vma_metadata *meta = cprm->vma_meta + i;
struct elf_phdr phdr;
phdr.p_type = PT_LOAD;
@@ -2280,8 +2275,8 @@ static int elf_core_dump(struct coredump
if (!dump_skip(cprm, dataoff - cprm->pos))
goto end_coredump;
- for (i = 0; i < vma_count; i++) {
- struct core_vma_metadata *meta = vma_meta + i;
+ for (i = 0; i < cprm->vma_count; i++) {
+ struct core_vma_metadata *meta = cprm->vma_meta + i;
if (!dump_user_range(cprm, meta->start, meta->dump_size))
goto end_coredump;
@@ -2299,7 +2294,6 @@ static int elf_core_dump(struct coredump
end_coredump:
free_note_info(&info);
kfree(shdr4extnum);
- kvfree(vma_meta);
kfree(phdr4note);
return has_dumped;
}
--- a/fs/binfmt_elf_fdpic.c
+++ b/fs/binfmt_elf_fdpic.c
@@ -1479,7 +1479,7 @@ static bool elf_fdpic_dump_segments(stru
static int elf_fdpic_core_dump(struct coredump_params *cprm)
{
int has_dumped = 0;
- int vma_count, segs;
+ int segs;
int i;
struct elfhdr *elf = NULL;
loff_t offset = 0, dataoff;
@@ -1494,8 +1494,6 @@ static int elf_fdpic_core_dump(struct co
elf_addr_t e_shoff;
struct core_thread *ct;
struct elf_thread_status *tmp;
- struct core_vma_metadata *vma_meta = NULL;
- size_t vma_data_size;
/* alloc memory for large data structures: too large to be on stack */
elf = kmalloc(sizeof(*elf), GFP_KERNEL);
@@ -1505,9 +1503,6 @@ static int elf_fdpic_core_dump(struct co
if (!psinfo)
goto end_coredump;
- if (dump_vma_snapshot(cprm, &vma_count, &vma_meta, &vma_data_size))
- goto end_coredump;
-
for (ct = current->mm->core_state->dumper.next;
ct; ct = ct->next) {
tmp = elf_dump_thread_status(cprm->siginfo->si_signo,
@@ -1527,7 +1522,7 @@ static int elf_fdpic_core_dump(struct co
tmp->next = thread_list;
thread_list = tmp;
- segs = vma_count + elf_core_extra_phdrs();
+ segs = cprm->vma_count + elf_core_extra_phdrs();
/* for notes section */
segs++;
@@ -1572,7 +1567,7 @@ static int elf_fdpic_core_dump(struct co
/* Page-align dumped data */
dataoff = offset = roundup(offset, ELF_EXEC_PAGESIZE);
- offset += vma_data_size;
+ offset += cprm->vma_data_size;
offset += elf_core_extra_data_size();
e_shoff = offset;
@@ -1592,8 +1587,8 @@ static int elf_fdpic_core_dump(struct co
goto end_coredump;
/* write program headers for segments dump */
- for (i = 0; i < vma_count; i++) {
- struct core_vma_metadata *meta = vma_meta + i;
+ for (i = 0; i < cprm->vma_count; i++) {
+ struct core_vma_metadata *meta = cprm->vma_meta + i;
struct elf_phdr phdr;
size_t sz;
@@ -1643,7 +1638,7 @@ static int elf_fdpic_core_dump(struct co
if (!dump_skip(cprm, dataoff - cprm->pos))
goto end_coredump;
- if (!elf_fdpic_dump_segments(cprm, vma_meta, vma_count))
+ if (!elf_fdpic_dump_segments(cprm, cprm->vma_meta, cprm->vma_count))
goto end_coredump;
if (!elf_core_write_extra_data(cprm))
@@ -1667,7 +1662,6 @@ end_coredump:
thread_list = thread_list->next;
kfree(tmp);
}
- kvfree(vma_meta);
kfree(phdr4note);
kfree(elf);
kfree(psinfo);
--- a/fs/coredump.c
+++ b/fs/coredump.c
@@ -53,6 +53,8 @@
#include <trace/events/sched.h>
+static bool dump_vma_snapshot(struct coredump_params *cprm);
+
int core_uses_pid;
unsigned int core_pipe_limit;
char core_pattern[CORENAME_MAX_SIZE] = "core";
@@ -602,6 +604,7 @@ void do_coredump(const kernel_siginfo_t
* by any locks.
*/
.mm_flags = mm->flags,
+ .vma_meta = NULL,
};
audit_core_dumps(siginfo->si_signo);
@@ -807,9 +810,13 @@ void do_coredump(const kernel_siginfo_t
pr_info("Core dump to |%s disabled\n", cn.corename);
goto close_fail;
}
+ if (!dump_vma_snapshot(&cprm))
+ goto close_fail;
+
file_start_write(cprm.file);
core_dumped = binfmt->core_dump(&cprm);
file_end_write(cprm.file);
+ kvfree(cprm.vma_meta);
}
if (ispipe && core_pipe_limit)
wait_for_dump_helpers(cprm.file);
@@ -1085,14 +1092,11 @@ static struct vm_area_struct *next_vma(s
* Under the mmap_lock, take a snapshot of relevant information about the task's
* VMAs.
*/
-int dump_vma_snapshot(struct coredump_params *cprm, int *vma_count,
- struct core_vma_metadata **vma_meta,
- size_t *vma_data_size_ptr)
+static bool dump_vma_snapshot(struct coredump_params *cprm)
{
struct vm_area_struct *vma, *gate_vma;
struct mm_struct *mm = current->mm;
int i;
- size_t vma_data_size = 0;
/*
* Once the stack expansion code is fixed to not change VMA bounds
@@ -1100,20 +1104,21 @@ int dump_vma_snapshot(struct coredump_pa
* mmap_lock in read mode.
*/
if (mmap_write_lock_killable(mm))
- return -EINTR;
+ return false;
+ cprm->vma_data_size = 0;
gate_vma = get_gate_vma(mm);
- *vma_count = mm->map_count + (gate_vma ? 1 : 0);
+ cprm->vma_count = mm->map_count + (gate_vma ? 1 : 0);
- *vma_meta = kvmalloc_array(*vma_count, sizeof(**vma_meta), GFP_KERNEL);
- if (!*vma_meta) {
+ cprm->vma_meta = kvmalloc_array(cprm->vma_count, sizeof(*cprm->vma_meta), GFP_KERNEL);
+ if (!cprm->vma_meta) {
mmap_write_unlock(mm);
- return -ENOMEM;
+ return false;
}
for (i = 0, vma = first_vma(current, gate_vma); vma != NULL;
vma = next_vma(vma, gate_vma), i++) {
- struct core_vma_metadata *m = (*vma_meta) + i;
+ struct core_vma_metadata *m = cprm->vma_meta + i;
m->start = vma->vm_start;
m->end = vma->vm_end;
@@ -1123,13 +1128,14 @@ int dump_vma_snapshot(struct coredump_pa
mmap_write_unlock(mm);
- if (WARN_ON(i != *vma_count)) {
- kvfree(*vma_meta);
- return -EFAULT;
+ if (WARN_ON(i != cprm->vma_count)) {
+ kvfree(cprm->vma_meta);
+ return false;
}
- for (i = 0; i < *vma_count; i++) {
- struct core_vma_metadata *m = (*vma_meta) + i;
+
+ for (i = 0; i < cprm->vma_count; i++) {
+ struct core_vma_metadata *m = cprm->vma_meta + i;
if (m->dump_size == DUMP_SIZE_MAYBE_ELFHDR_PLACEHOLDER) {
char elfmag[SELFMAG];
@@ -1142,9 +1148,8 @@ int dump_vma_snapshot(struct coredump_pa
}
}
- vma_data_size += m->dump_size;
+ cprm->vma_data_size += m->dump_size;
}
- *vma_data_size_ptr = vma_data_size;
- return 0;
+ return true;
}
--- a/include/linux/binfmts.h
+++ b/include/linux/binfmts.h
@@ -82,6 +82,9 @@ struct coredump_params {
unsigned long mm_flags;
loff_t written;
loff_t pos;
+ int vma_count;
+ size_t vma_data_size;
+ struct core_vma_metadata *vma_meta;
};
/*
--- a/include/linux/coredump.h
+++ b/include/linux/coredump.h
@@ -24,9 +24,6 @@ extern int dump_align(struct coredump_pa
extern void dump_truncate(struct coredump_params *cprm);
int dump_user_range(struct coredump_params *cprm, unsigned long start,
unsigned long len);
-int dump_vma_snapshot(struct coredump_params *cprm, int *vma_count,
- struct core_vma_metadata **vma_meta,
- size_t *vma_data_size_ptr);
#ifdef CONFIG_COREDUMP
extern void do_coredump(const kernel_siginfo_t *siginfo);
#else
From: Martin Varghese <[email protected]>
commit f19c44452b58a84d95e209b847f5495d91c9983a upstream.
IPv6 nd target mask was not getting populated in flow dump.
In the function __ovs_nla_put_key the icmp code mask field was checked
instead of icmp code key field to classify the flow as neighbour discovery.
ufid:bdfbe3e5-60c2-43b0-a5ff-dfcac1c37328, recirc_id(0),dp_hash(0/0),
skb_priority(0/0),in_port(ovs-nm1),skb_mark(0/0),ct_state(0/0),
ct_zone(0/0),ct_mark(0/0),ct_label(0/0),
eth(src=00:00:00:00:00:00/00:00:00:00:00:00,
dst=00:00:00:00:00:00/00:00:00:00:00:00),
eth_type(0x86dd),
ipv6(src=::/::,dst=::/::,label=0/0,proto=58,tclass=0/0,hlimit=0/0,frag=no),
icmpv6(type=135,code=0),
nd(target=2001::2/::,
sll=00:00:00:00:00:00/00:00:00:00:00:00,
tll=00:00:00:00:00:00/00:00:00:00:00:00),
packets:10, bytes:860, used:0.504s, dp:ovs, actions:ovs-nm2
Fixes: e64457191a25 (openvswitch: Restructure datapath.c and flow.c)
Signed-off-by: Martin Varghese <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/openvswitch/flow_netlink.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/net/openvswitch/flow_netlink.c
+++ b/net/openvswitch/flow_netlink.c
@@ -2201,8 +2201,8 @@ static int __ovs_nla_put_key(const struc
icmpv6_key->icmpv6_type = ntohs(output->tp.src);
icmpv6_key->icmpv6_code = ntohs(output->tp.dst);
- if (icmpv6_key->icmpv6_type == NDISC_NEIGHBOUR_SOLICITATION ||
- icmpv6_key->icmpv6_type == NDISC_NEIGHBOUR_ADVERTISEMENT) {
+ if (swkey->tp.src == htons(NDISC_NEIGHBOUR_SOLICITATION) ||
+ swkey->tp.src == htons(NDISC_NEIGHBOUR_ADVERTISEMENT)) {
struct ovs_key_nd *nd_key;
nla = nla_reserve(skb, OVS_KEY_ATTR_ND, sizeof(*nd_key));
From: Xin Long <[email protected]>
commit a4a600dd301ccde6ea239804ec1f19364a39d643 upstream.
When enabling encap for a ipv6 socket without udp_encap_needed_key
increased, UDP GRO won't work for v4 mapped v6 address packets as
sk will be NULL in udp4_gro_receive().
This patch is to enable it by increasing udp_encap_needed_key for
v6 sockets in udp_tunnel_encap_enable(), and correspondingly
decrease udp_encap_needed_key in udpv6_destroy_sock().
v1->v2:
- add udp_encap_disable() and export it.
v2->v3:
- add the change for rxrpc and bareudp into one patch, as Alex
suggested.
v3->v4:
- move rxrpc part to another patch.
Acked-by: Willem de Bruijn <[email protected]>
Signed-off-by: Xin Long <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Tested-by: Antonio Quartulli <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/bareudp.c | 6 ------
include/net/udp.h | 1 +
include/net/udp_tunnel.h | 3 +--
net/ipv4/udp.c | 6 ++++++
net/ipv6/udp.c | 4 +++-
5 files changed, 11 insertions(+), 9 deletions(-)
--- a/drivers/net/bareudp.c
+++ b/drivers/net/bareudp.c
@@ -246,12 +246,6 @@ static int bareudp_socket_create(struct
tunnel_cfg.encap_destroy = NULL;
setup_udp_tunnel_sock(bareudp->net, sock, &tunnel_cfg);
- /* As the setup_udp_tunnel_sock does not call udp_encap_enable if the
- * socket type is v6 an explicit call to udp_encap_enable is needed.
- */
- if (sock->sk->sk_family == AF_INET6)
- udp_encap_enable();
-
rcu_assign_pointer(bareudp->sock, sock);
return 0;
}
--- a/include/net/udp.h
+++ b/include/net/udp.h
@@ -467,6 +467,7 @@ void udp_init(void);
DECLARE_STATIC_KEY_FALSE(udp_encap_needed_key);
void udp_encap_enable(void);
+void udp_encap_disable(void);
#if IS_ENABLED(CONFIG_IPV6)
DECLARE_STATIC_KEY_FALSE(udpv6_encap_needed_key);
void udpv6_encap_enable(void);
--- a/include/net/udp_tunnel.h
+++ b/include/net/udp_tunnel.h
@@ -177,9 +177,8 @@ static inline void udp_tunnel_encap_enab
#if IS_ENABLED(CONFIG_IPV6)
if (sock->sk->sk_family == PF_INET6)
ipv6_stub->udpv6_encap_enable();
- else
#endif
- udp_encap_enable();
+ udp_encap_enable();
}
#define UDP_TUNNEL_NIC_MAX_TABLES 4
--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -598,6 +598,12 @@ void udp_encap_enable(void)
}
EXPORT_SYMBOL(udp_encap_enable);
+void udp_encap_disable(void)
+{
+ static_branch_dec(&udp_encap_needed_key);
+}
+EXPORT_SYMBOL(udp_encap_disable);
+
/* Handler for tunnels with arbitrary destination ports: no socket lookup, go
* through error handlers in encapsulations looking for a match.
*/
--- a/net/ipv6/udp.c
+++ b/net/ipv6/udp.c
@@ -1610,8 +1610,10 @@ void udpv6_destroy_sock(struct sock *sk)
if (encap_destroy)
encap_destroy(sk);
}
- if (up->encap_enabled)
+ if (up->encap_enabled) {
static_branch_dec(&udpv6_encap_needed_key);
+ udp_encap_disable();
+ }
}
inet6_destroy_sock(sk);
From: Zhihao Cheng <[email protected]>
commit 3b67db8a6ca83e6ff90b756d3da0c966f61cd37b upstream.
MM defined the rule [1] very clearly that once page was set with PG_private
flag, we should increment the refcount in that page, also main flows like
pageout(), migrate_page() will assume there is one additional page
reference count if page_has_private() returns true. Otherwise, we may
get a BUG in page migration:
page:0000000080d05b9d refcount:-1 mapcount:0 mapping:000000005f4d82a8
index:0xe2 pfn:0x14c12
aops:ubifs_file_address_operations [ubifs] ino:8f1 dentry name:"f30e"
flags: 0x1fffff80002405(locked|uptodate|owner_priv_1|private|node=0|
zone=1|lastcpupid=0x1fffff)
page dumped because: VM_BUG_ON_PAGE(page_count(page) != 0)
------------[ cut here ]------------
kernel BUG at include/linux/page_ref.h:184!
invalid opcode: 0000 [#1] SMP
CPU: 3 PID: 38 Comm: kcompactd0 Not tainted 5.15.0-rc5
RIP: 0010:migrate_page_move_mapping+0xac3/0xe70
Call Trace:
ubifs_migrate_page+0x22/0xc0 [ubifs]
move_to_new_page+0xb4/0x600
migrate_pages+0x1523/0x1cc0
compact_zone+0x8c5/0x14b0
kcompactd+0x2bc/0x560
kthread+0x18c/0x1e0
ret_from_fork+0x1f/0x30
Before the time, we should make clean a concept, what does refcount means
in page gotten from grab_cache_page_write_begin(). There are 2 situations:
Situation 1: refcount is 3, page is created by __page_cache_alloc.
TYPE_A - the write process is using this page
TYPE_B - page is assigned to one certain mapping by calling
__add_to_page_cache_locked()
TYPE_C - page is added into pagevec list corresponding current cpu by
calling lru_cache_add()
Situation 2: refcount is 2, page is gotten from the mapping's tree
TYPE_B - page has been assigned to one certain mapping
TYPE_A - the write process is using this page (by calling
page_cache_get_speculative())
Filesystem releases one refcount by calling put_page() in xxx_write_end(),
the released refcount corresponds to TYPE_A (write task is using it). If
there are any processes using a page, page migration process will skip the
page by judging whether expected_page_refs() equals to page refcount.
The BUG is caused by following process:
PA(cpu 0) kcompactd(cpu 1)
compact_zone
ubifs_write_begin
page_a = grab_cache_page_write_begin
add_to_page_cache_lru
lru_cache_add
pagevec_add // put page into cpu 0's pagevec
(refcnf = 3, for page creation process)
ubifs_write_end
SetPagePrivate(page_a) // doesn't increase page count !
unlock_page(page_a)
put_page(page_a) // refcnt = 2
[...]
PB(cpu 0)
filemap_read
filemap_get_pages
add_to_page_cache_lru
lru_cache_add
__pagevec_lru_add // traverse all pages in cpu 0's pagevec
__pagevec_lru_add_fn
SetPageLRU(page_a)
isolate_migratepages
isolate_migratepages_block
get_page_unless_zero(page_a)
// refcnt = 3
list_add(page_a, from_list)
migrate_pages(from_list)
__unmap_and_move
move_to_new_page
ubifs_migrate_page(page_a)
migrate_page_move_mapping
expected_page_refs get 3
(migration[1] + mapping[1] + private[1])
release_pages
put_page_testzero(page_a) // refcnt = 3
page_ref_freeze // refcnt = 0
page_ref_dec_and_test(0 - 1 = -1)
page_ref_unfreeze
VM_BUG_ON_PAGE(-1 != 0, page)
UBIFS doesn't increase the page refcount after setting private flag, which
leads to page migration task believes the page is not used by any other
processes, so the page is migrated. This causes concurrent accessing on
page refcount between put_page() called by other process(eg. read process
calls lru_cache_add) and page_ref_unfreeze() called by migration task.
Actually zhangjun has tried to fix this problem [2] by recalculating page
refcnt in ubifs_migrate_page(). It's better to follow MM rules [1], because
just like Kirill suggested in [2], we need to check all users of
page_has_private() helper. Like f2fs does in [3], fix it by adding/deleting
refcount when setting/clearing private for a page. BTW, according to [4],
we set 'page->private' as 1 because ubifs just simply SetPagePrivate().
And, [5] provided a common helper to set/clear page private, ubifs can
use this helper following the example of iomap, afs, btrfs, etc.
Jump [6] to find a reproducer.
[1] https://lore.kernel.org/lkml/[email protected]
[2] https://www.spinics.net/lists/linux-mtd/msg04018.html
[3] http://lkml.iu.edu/hypermail/linux/kernel/1903.0/03313.html
[4] https://lore.kernel.org/linux-f2fs-devel/[email protected]
[5] https://lore.kernel.org/all/[email protected]
[6] https://bugzilla.kernel.org/show_bug.cgi?id=214961
Fixes: 1e51764a3c2ac0 ("UBIFS: add new flash file system")
Signed-off-by: Zhihao Cheng <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ubifs/file.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
--- a/fs/ubifs/file.c
+++ b/fs/ubifs/file.c
@@ -570,7 +570,7 @@ static int ubifs_write_end(struct file *
}
if (!PagePrivate(page)) {
- SetPagePrivate(page);
+ attach_page_private(page, (void *)1);
atomic_long_inc(&c->dirty_pg_cnt);
__set_page_dirty_nobuffers(page);
}
@@ -947,7 +947,7 @@ static int do_writepage(struct page *pag
release_existing_page_budget(c);
atomic_long_dec(&c->dirty_pg_cnt);
- ClearPagePrivate(page);
+ detach_page_private(page);
ClearPageChecked(page);
kunmap(page);
@@ -1303,7 +1303,7 @@ static void ubifs_invalidatepage(struct
release_existing_page_budget(c);
atomic_long_dec(&c->dirty_pg_cnt);
- ClearPagePrivate(page);
+ detach_page_private(page);
ClearPageChecked(page);
}
@@ -1470,8 +1470,8 @@ static int ubifs_migrate_page(struct add
return rc;
if (PagePrivate(page)) {
- ClearPagePrivate(page);
- SetPagePrivate(newpage);
+ detach_page_private(page);
+ attach_page_private(newpage, (void *)1);
}
if (mode != MIGRATE_SYNC_NO_COPY)
@@ -1495,7 +1495,7 @@ static int ubifs_releasepage(struct page
return 0;
ubifs_assert(c, PagePrivate(page));
ubifs_assert(c, 0);
- ClearPagePrivate(page);
+ detach_page_private(page);
ClearPageChecked(page);
return 1;
}
@@ -1566,7 +1566,7 @@ static vm_fault_t ubifs_vm_page_mkwrite(
else {
if (!PageChecked(page))
ubifs_convert_page_budget(c);
- SetPagePrivate(page);
+ attach_page_private(page, (void *)1);
atomic_long_inc(&c->dirty_pg_cnt);
__set_page_dirty_nobuffers(page);
}
From: Charan Teja Kalla <[email protected]>
commit 08095d6310a7ce43256b4251577bc66a25c6e1a6 upstream.
The process_madvise() system call is expected to skip holes in vma passed
through 'struct iovec' vector list. But do_madvise, which
process_madvise() calls for each vma, returns ENOMEM in case of unmapped
holes, despite the VMA is processed.
Thus process_madvise() should treat ENOMEM as expected and consider the
VMA passed to as processed and continue processing other vma's in the
vector list. Returning -ENOMEM to user, despite the VMA is processed,
will be unable to figure out where to start the next madvise.
Link: https://lkml.kernel.org/r/4f091776142f2ebf7b94018146de72318474e686.1647008754.git.quic_charante@quicinc.com
Fixes: ecb8ac8b1f14("mm/madvise: introduce process_madvise() syscall: an external memory hinting API")
Signed-off-by: Charan Teja Kalla <[email protected]>
Cc: David Rientjes <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Minchan Kim <[email protected]>
Cc: Nadav Amit <[email protected]>
Cc: Stephen Rothwell <[email protected]>
Cc: Suren Baghdasaryan <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/madvise.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
--- a/mm/madvise.c
+++ b/mm/madvise.c
@@ -1222,9 +1222,16 @@ SYSCALL_DEFINE5(process_madvise, int, pi
while (iov_iter_count(&iter)) {
iovec = iov_iter_iovec(&iter);
+ /*
+ * do_madvise returns ENOMEM if unmapped holes are present
+ * in the passed VMA. process_madvise() is expected to skip
+ * unmapped holes passed to it in the 'struct iovec' list
+ * and not fail because of them. Thus treat -ENOMEM return
+ * from do_madvise as valid and continue processing.
+ */
ret = do_madvise(mm, (unsigned long)iovec.iov_base,
iovec.iov_len, behavior);
- if (ret < 0)
+ if (ret < 0 && ret != -ENOMEM)
break;
iov_iter_advance(&iter, iovec.iov_len);
}
From: Baokun Li <[email protected]>
commit 705757274599e2e064dd3054aabc74e8af31a095 upstream.
When renaming the whiteout file, the old whiteout file is not deleted.
Therefore, we add the old dentry size to the old dir like XFS.
Otherwise, an error may be reported due to `fscki->calc_sz != fscki->size`
in check_indes.
Fixes: 9e0a1fff8db56ea ("ubifs: Implement RENAME_WHITEOUT")
Reported-by: Zhihao Cheng <[email protected]>
Signed-off-by: Baokun Li <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ubifs/dir.c | 3 +++
1 file changed, 3 insertions(+)
--- a/fs/ubifs/dir.c
+++ b/fs/ubifs/dir.c
@@ -1360,6 +1360,9 @@ static int do_rename(struct inode *old_d
iput(whiteout);
goto out_release;
}
+
+ /* Add the old_dentry size to the old_dir size. */
+ old_sz -= CALC_DENT_SIZE(fname_len(&old_nm));
}
lock_4_inodes(old_dir, new_dir, new_inode, whiteout);
From: Ammar Faizi <[email protected]>
commit b7fb0ae09009d076964afe4c1a2bde1ee2bd88a9 upstream.
Do not call snd_dma_free_pages() when snd_dma_alloc_pages() returns
-ENOMEM because it leads to a NULL pointer dereference bug.
The dmesg says:
[ T1387] sof-audio-pci-intel-tgl 0000:00:1f.3: error: memory alloc failed: -12
[ T1387] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ T1387] #PF: supervisor read access in kernel mode
[ T1387] #PF: error_code(0x0000) - not-present page
[ T1387] PGD 0 P4D 0
[ T1387] Oops: 0000 [#1] PREEMPT SMP NOPTI
[ T1387] CPU: 6 PID: 1387 Comm: alsa-sink-HDA A Tainted: G W 5.17.0-rc4-superb-owl-00055-g80d47f5de5e3
[ T1387] Hardware name: HP HP Laptop 14s-dq2xxx/87FD, BIOS F.15 09/15/2021
[ T1387] RIP: 0010:dma_free_noncontiguous+0x37/0x80
[ T1387] Code: [... snip ...]
[ T1387] RSP: 0000:ffffc90002b87770 EFLAGS: 00010246
[ T1387] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
[ T1387] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff888101db30d0
[ T1387] RBP: 00000000fffffff4 R08: 0000000000000000 R09: 0000000000000000
[ T1387] R10: 0000000000000000 R11: ffffc90002b874d0 R12: 0000000000000001
[ T1387] R13: 0000000000058000 R14: ffff888105260c68 R15: ffff888105260828
[ T1387] FS: 00007f42e2ffd640(0000) GS:ffff888466b80000(0000) knlGS:0000000000000000
[ T1387] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ T1387] CR2: 0000000000000000 CR3: 000000014acf0003 CR4: 0000000000770ee0
[ T1387] PKRU: 55555554
[ T1387] Call Trace:
[ T1387] <TASK>
[ T1387] cl_stream_prepare+0x10a/0x120 [snd_sof_intel_hda_common 146addf995b9279ae7f509621078cccbe4f875e1]
[... snip ...]
[ T1387] </TASK>
Cc: Daniel Baluta <[email protected]>
Cc: Jaroslav Kysela <[email protected]>
Cc: Kai Vehmanen <[email protected]>
Cc: Keyon Jie <[email protected]>
Cc: Liam Girdwood <[email protected]>
Cc: Mark Brown <[email protected]>
Cc: Rander Wang <[email protected]>
Cc: Ranjani Sridharan <[email protected]>
Cc: Takashi Iwai <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected] # v5.2+
Fixes: d16046ffa6de040bf580a64d5f4d0aa18258a854 ("ASoC: SOF: Intel: Add Intel specific HDA firmware loader")
Link: https://lore.kernel.org/lkml/[email protected]/ # v1
Link: https://lore.kernel.org/lkml/[email protected]/ # v2
Link: https://lore.kernel.org/lkml/[email protected]/ # v3
Reviewed-by: Peter Ujfalusi <[email protected]>
Reviewed-by: Pierre-Louis Bossart <[email protected]>
Signed-off-by: Ammar Faizi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
[ammarfaizi2: Backport to Linux 5.10 LTS]
Signed-off-by: Ammar Faizi <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/soc/sof/intel/hda-loader.c | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)
--- a/sound/soc/sof/intel/hda-loader.c
+++ b/sound/soc/sof/intel/hda-loader.c
@@ -47,7 +47,7 @@ static struct hdac_ext_stream *cl_stream
ret = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV_SG, &pci->dev, size, dmab);
if (ret < 0) {
dev_err(sdev->dev, "error: memory alloc failed: %x\n", ret);
- goto error;
+ goto out_put;
}
hstream->period_bytes = 0;/* initialize period_bytes */
@@ -58,22 +58,23 @@ static struct hdac_ext_stream *cl_stream
ret = hda_dsp_iccmax_stream_hw_params(sdev, dsp_stream, dmab, NULL);
if (ret < 0) {
dev_err(sdev->dev, "error: iccmax stream prepare failed: %x\n", ret);
- goto error;
+ goto out_free;
}
} else {
ret = hda_dsp_stream_hw_params(sdev, dsp_stream, dmab, NULL);
if (ret < 0) {
dev_err(sdev->dev, "error: hdac prepare failed: %x\n", ret);
- goto error;
+ goto out_free;
}
hda_dsp_stream_spib_config(sdev, dsp_stream, HDA_DSP_SPIB_ENABLE, size);
}
return dsp_stream;
-error:
- hda_dsp_stream_put(sdev, direction, hstream->stream_tag);
+out_free:
snd_dma_free_pages(dmab);
+out_put:
+ hda_dsp_stream_put(sdev, direction, hstream->stream_tag);
return ERR_PTR(ret);
}
From: Wang Yufen <[email protected]>
[ Upstream commit 2486ab434b2c2a14e9237296db00b1e1b7ae3273 ]
If tcp_bpf_sendmsg is running during a tear down operation, psock may be
freed.
tcp_bpf_sendmsg()
tcp_bpf_send_verdict()
sk_msg_return()
tcp_bpf_sendmsg_redir()
unlikely(!psock))
sk_msg_free()
The mem of msg has been uncharged in tcp_bpf_send_verdict() by
sk_msg_return(), and would be uncharged by sk_msg_free() again. When psock
is null, we can simply returning an error code, this would then trigger
the sk_msg_free_nocharge in the error path of __SK_REDIRECT and would have
the side effect of throwing an error up to user space. This would be a
slight change in behavior from user side but would look the same as an
error if the redirect on the socket threw an error.
This issue can cause the following info:
WARNING: CPU: 0 PID: 2136 at net/ipv4/af_inet.c:155 inet_sock_destruct+0x13c/0x260
Call Trace:
<TASK>
__sk_destruct+0x24/0x1f0
sk_psock_destroy+0x19b/0x1c0
process_one_work+0x1b3/0x3c0
worker_thread+0x30/0x350
? process_one_work+0x3c0/0x3c0
kthread+0xe6/0x110
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x22/0x30
</TASK>
Fixes: 604326b41a6f ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: Wang Yufen <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: John Fastabend <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
net/ipv4/tcp_bpf.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/net/ipv4/tcp_bpf.c b/net/ipv4/tcp_bpf.c
index c089e8166fa9..eaf2308c355a 100644
--- a/net/ipv4/tcp_bpf.c
+++ b/net/ipv4/tcp_bpf.c
@@ -218,10 +218,9 @@ int tcp_bpf_sendmsg_redir(struct sock *sk, struct sk_msg *msg,
struct sk_psock *psock = sk_psock_get(sk);
int ret;
- if (unlikely(!psock)) {
- sk_msg_free(sk, msg);
- return 0;
- }
+ if (unlikely(!psock))
+ return -EPIPE;
+
ret = ingress ? bpf_tcp_ingress(sk, psock, msg, bytes, flags) :
tcp_bpf_push_locked(sk, msg, bytes, flags, false);
sk_psock_put(sk, psock);
--
2.34.1
From: David Engraf <[email protected]>
commit 0a32c88ddb9af30e8a16d41d7b9b824c27d29459 upstream.
Commit 6d502b6ba1b2 ("arm64: signal: nofpsimd: Handle fp/simd context for
signal frames") introduced saving the fp/simd context for signal handling
only when support is available. But setup_sigframe_layout() always
reserves memory for fp/simd context. The additional memory is not touched
because preserve_fpsimd_context() is not called and thus the magic is
invalid.
This may lead to an error when parse_user_sigframe() checks the fp/simd
area and does not find a valid magic number.
Signed-off-by: David Engraf <[email protected]>
Reviwed-by: Mark Brown <[email protected]>
Fixes: 6d502b6ba1b267b3 ("arm64: signal: nofpsimd: Handle fp/simd context for signal frames")
Cc: <[email protected]> # 5.6.x
Reviewed-by: Catalin Marinas <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm64/kernel/signal.c | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
--- a/arch/arm64/kernel/signal.c
+++ b/arch/arm64/kernel/signal.c
@@ -572,10 +572,12 @@ static int setup_sigframe_layout(struct
{
int err;
- err = sigframe_alloc(user, &user->fpsimd_offset,
- sizeof(struct fpsimd_context));
- if (err)
- return err;
+ if (system_supports_fpsimd()) {
+ err = sigframe_alloc(user, &user->fpsimd_offset,
+ sizeof(struct fpsimd_context));
+ if (err)
+ return err;
+ }
/* fault information, if valid */
if (add_all || current->thread.fault_code) {
From: Lorenzo Bianconi <[email protected]>
[ Upstream commit a56b1b0f145ef2d6bb9312dedf3ab8558ef50a5b ]
mac80211 provides aid in vif->bss_conf.aid for sta mode and not in
sta->aid. Fix mt7915_mcu_wtbl_generic_tlv routine using proper value for
aid in sta mode.
Fixes: e57b7901469fc ("mt76: add mac80211 driver for MT7915 PCIe-based chipsets")
Signed-off-by: Lorenzo Bianconi <[email protected]>
Signed-off-by: Felix Fietkau <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/mediatek/mt76/mt7915/mcu.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
index 9a7f317a098f..6e73964b8b0a 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
@@ -1259,8 +1259,11 @@ mt7915_mcu_wtbl_generic_tlv(struct sk_buff *skb, struct ieee80211_vif *vif,
generic = (struct wtbl_generic *)tlv;
if (sta) {
+ if (vif->type == NL80211_IFTYPE_STATION)
+ generic->partial_aid = cpu_to_le16(vif->bss_conf.aid);
+ else
+ generic->partial_aid = cpu_to_le16(sta->aid);
memcpy(generic->peer_addr, sta->addr, ETH_ALEN);
- generic->partial_aid = cpu_to_le16(sta->aid);
generic->muar_idx = mvif->omac_idx;
generic->qos = sta->wme;
} else {
--
2.34.1
From: Jiri Slaby <[email protected]>
[ Upstream commit cd3a4907ee334b40d7aa880c7ab310b154fd5cd4 ]
When LSR is 0xff in ->activate() (rather unlike), we return an error.
Provided ->shutdown() is not called when ->activate() fails, nothing
actually frees the buffer in this case.
Fix this by properly freeing the buffer in a designated label. We jump
there also from the "!info->type" if now too.
Fixes: 6769140d3047 ("tty: mxser: use the tty_port_open method")
Signed-off-by: Jiri Slaby <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/tty/mxser.c | 15 +++++++++++----
1 file changed, 11 insertions(+), 4 deletions(-)
diff --git a/drivers/tty/mxser.c b/drivers/tty/mxser.c
index 3703987c4666..8344265a1948 100644
--- a/drivers/tty/mxser.c
+++ b/drivers/tty/mxser.c
@@ -858,6 +858,7 @@ static int mxser_activate(struct tty_port *port, struct tty_struct *tty)
struct mxser_port *info = container_of(port, struct mxser_port, port);
unsigned long page;
unsigned long flags;
+ int ret;
page = __get_free_page(GFP_KERNEL);
if (!page)
@@ -867,9 +868,9 @@ static int mxser_activate(struct tty_port *port, struct tty_struct *tty)
if (!info->ioaddr || !info->type) {
set_bit(TTY_IO_ERROR, &tty->flags);
- free_page(page);
spin_unlock_irqrestore(&info->slock, flags);
- return 0;
+ ret = 0;
+ goto err_free_xmit;
}
info->port.xmit_buf = (unsigned char *) page;
@@ -895,8 +896,10 @@ static int mxser_activate(struct tty_port *port, struct tty_struct *tty)
if (capable(CAP_SYS_ADMIN)) {
set_bit(TTY_IO_ERROR, &tty->flags);
return 0;
- } else
- return -ENODEV;
+ }
+
+ ret = -ENODEV;
+ goto err_free_xmit;
}
/*
@@ -941,6 +944,10 @@ static int mxser_activate(struct tty_port *port, struct tty_struct *tty)
spin_unlock_irqrestore(&info->slock, flags);
return 0;
+err_free_xmit:
+ free_page(page);
+ info->port.xmit_buf = NULL;
+ return ret;
}
/*
--
2.34.1
From: Kees Cook <[email protected]>
[ Upstream commit 27e9faf415dbf94af19b9c827842435edbc1fbbc ]
Since STRING_CST may not be NUL terminated, strncmp() was used for check
for equality. However, this may lead to mismatches for longer section
names where the start matches the tested-for string. Test for exact
equality by checking for the presences of NUL termination.
Cc: Alexander Popov <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
scripts/gcc-plugins/stackleak_plugin.c | 25 +++++++++++++++++++++----
1 file changed, 21 insertions(+), 4 deletions(-)
diff --git a/scripts/gcc-plugins/stackleak_plugin.c b/scripts/gcc-plugins/stackleak_plugin.c
index 48e141e07956..dacd697ffd38 100644
--- a/scripts/gcc-plugins/stackleak_plugin.c
+++ b/scripts/gcc-plugins/stackleak_plugin.c
@@ -431,6 +431,23 @@ static unsigned int stackleak_cleanup_execute(void)
return 0;
}
+/*
+ * STRING_CST may or may not be NUL terminated:
+ * https://gcc.gnu.org/onlinedocs/gccint/Constant-expressions.html
+ */
+static inline bool string_equal(tree node, const char *string, int length)
+{
+ if (TREE_STRING_LENGTH(node) < length)
+ return false;
+ if (TREE_STRING_LENGTH(node) > length + 1)
+ return false;
+ if (TREE_STRING_LENGTH(node) == length + 1 &&
+ TREE_STRING_POINTER(node)[length] != '\0')
+ return false;
+ return !memcmp(TREE_STRING_POINTER(node), string, length);
+}
+#define STRING_EQUAL(node, str) string_equal(node, str, strlen(str))
+
static bool stackleak_gate(void)
{
tree section;
@@ -440,13 +457,13 @@ static bool stackleak_gate(void)
if (section && TREE_VALUE(section)) {
section = TREE_VALUE(TREE_VALUE(section));
- if (!strncmp(TREE_STRING_POINTER(section), ".init.text", 10))
+ if (STRING_EQUAL(section, ".init.text"))
return false;
- if (!strncmp(TREE_STRING_POINTER(section), ".devinit.text", 13))
+ if (STRING_EQUAL(section, ".devinit.text"))
return false;
- if (!strncmp(TREE_STRING_POINTER(section), ".cpuinit.text", 13))
+ if (STRING_EQUAL(section, ".cpuinit.text"))
return false;
- if (!strncmp(TREE_STRING_POINTER(section), ".meminit.text", 13))
+ if (STRING_EQUAL(section, ".meminit.text"))
return false;
}
--
2.34.1
From: Minghao Chi (CGEL ZTE) <[email protected]>
[ Upstream commit 2a760554dcba450d3ad61b32375b50ed6d59a87c ]
It is not recommened to use platform_get_resource(pdev, IORESOURCE_IRQ)
for requesting IRQ's resources any more, as they can be not ready yet in
case of DT-booting.
platform_get_irq() instead is a recommended way for getting IRQ even if
it was not retrieved earlier.
It also makes code simpler because we're getting "int" value right away
and no conversion from resource to int is required.
Reported-by: Zeal Robot <[email protected]>
Signed-off-by: Minghao Chi (CGEL ZTE) <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/8390/mcf8390.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ethernet/8390/mcf8390.c b/drivers/net/ethernet/8390/mcf8390.c
index 4ad8031ab669..065fdbe66c42 100644
--- a/drivers/net/ethernet/8390/mcf8390.c
+++ b/drivers/net/ethernet/8390/mcf8390.c
@@ -406,12 +406,12 @@ static int mcf8390_init(struct net_device *dev)
static int mcf8390_probe(struct platform_device *pdev)
{
struct net_device *dev;
- struct resource *mem, *irq;
+ struct resource *mem;
resource_size_t msize;
- int ret;
+ int ret, irq;
- irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
- if (irq == NULL) {
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
dev_err(&pdev->dev, "no IRQ specified?\n");
return -ENXIO;
}
@@ -434,7 +434,7 @@ static int mcf8390_probe(struct platform_device *pdev)
SET_NETDEV_DEV(dev, &pdev->dev);
platform_set_drvdata(pdev, dev);
- dev->irq = irq->start;
+ dev->irq = irq;
dev->base_addr = mem->start;
ret = mcf8390_init(dev);
--
2.34.1
From: Hoang Le <[email protected]>
[ Upstream commit 6a7d8cff4a3301087dd139293e9bddcf63827282 ]
In the timer callback function tipc_sk_timeout(), we're trying to
reschedule another timeout to retransmit a setup request if destination
link is congested. But we use the incorrect timeout value
(msecs_to_jiffies(100)) instead of (jiffies + msecs_to_jiffies(100)),
so that the timer expires immediately, it's irrelevant for original
description.
In this commit we correct the timeout value in sk_reset_timer()
Fixes: 6787927475e5 ("tipc: buffer overflow handling in listener socket")
Acked-by: Ying Xue <[email protected]>
Signed-off-by: Hoang Le <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/tipc/socket.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/net/tipc/socket.c b/net/tipc/socket.c
index 8d2c98531af4..42283dc6c5b7 100644
--- a/net/tipc/socket.c
+++ b/net/tipc/socket.c
@@ -2846,7 +2846,8 @@ static void tipc_sk_retry_connect(struct sock *sk, struct sk_buff_head *list)
/* Try again later if dest link is congested */
if (tsk->cong_link_cnt) {
- sk_reset_timer(sk, &sk->sk_timer, msecs_to_jiffies(100));
+ sk_reset_timer(sk, &sk->sk_timer,
+ jiffies + msecs_to_jiffies(100));
return;
}
/* Prepare SYN for retransmit */
--
2.34.1
From: Miaoqian Lin <[email protected]>
[ Upstream commit dab4df9ca919f59e5b9dd84385eaf34d4f20dbb0 ]
The device_node pointer is returned by of_parse_phandle() with refcount
incremented. We should use of_node_put() on it when done.
Fixes: a6df410d420a ("pinctrl: mediatek: Add Pinctrl/GPIO driver for mt8135.")
Signed-off-by: Miaoqian Lin <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pinctrl/mediatek/pinctrl-mtk-common.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/pinctrl/mediatek/pinctrl-mtk-common.c b/drivers/pinctrl/mediatek/pinctrl-mtk-common.c
index a02ad10ec6fa..730581d13064 100644
--- a/drivers/pinctrl/mediatek/pinctrl-mtk-common.c
+++ b/drivers/pinctrl/mediatek/pinctrl-mtk-common.c
@@ -1039,6 +1039,7 @@ int mtk_pctrl_init(struct platform_device *pdev,
node = of_parse_phandle(np, "mediatek,pctl-regmap", 0);
if (node) {
pctl->regmap1 = syscon_node_to_regmap(node);
+ of_node_put(node);
if (IS_ERR(pctl->regmap1))
return PTR_ERR(pctl->regmap1);
} else if (regmap) {
@@ -1052,6 +1053,7 @@ int mtk_pctrl_init(struct platform_device *pdev,
node = of_parse_phandle(np, "mediatek,pctl-regmap", 1);
if (node) {
pctl->regmap2 = syscon_node_to_regmap(node);
+ of_node_put(node);
if (IS_ERR(pctl->regmap2))
return PTR_ERR(pctl->regmap2);
}
--
2.34.1
From: Michael Schmitz <[email protected]>
commit c8be5edbd36ceed2ff3d6b8f8e40643c3f396ea3 upstream.
The code to set the shifter STe palette registers has a long
standing operator precedence bug, manifesting as colors set
on a 2 bits per pixel frame buffer coming up with a distinctive
blue tint.
Add parentheses around the calculation of the per-color palette
data before shifting those into their respective bit field position.
This bug goes back a long way (2.4 days at the very least) so there
won't be a Fixes: tag.
Tested on ARAnyM as well on Falcon030 hardware.
Cc: [email protected]
Reported-by: Geert Uytterhoeven <[email protected]>
Link: https://lore.kernel.org/all/CAMuHMdU3ievhXxKR_xi_v3aumnYW7UNUO6qMdhgfyWTyVSsCkQ@mail.gmail.com
Tested-by: Michael Schmitz <[email protected]>
Tested-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Michael Schmitz <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/video/fbdev/atafb.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
--- a/drivers/video/fbdev/atafb.c
+++ b/drivers/video/fbdev/atafb.c
@@ -1691,9 +1691,9 @@ static int falcon_setcolreg(unsigned int
((blue & 0xfc00) >> 8));
if (regno < 16) {
shifter_tt.color_reg[regno] =
- (((red & 0xe000) >> 13) | ((red & 0x1000) >> 12) << 8) |
- (((green & 0xe000) >> 13) | ((green & 0x1000) >> 12) << 4) |
- ((blue & 0xe000) >> 13) | ((blue & 0x1000) >> 12);
+ ((((red & 0xe000) >> 13) | ((red & 0x1000) >> 12)) << 8) |
+ ((((green & 0xe000) >> 13) | ((green & 0x1000) >> 12)) << 4) |
+ ((blue & 0xe000) >> 13) | ((blue & 0x1000) >> 12);
((u32 *)info->pseudo_palette)[regno] = ((red & 0xf800) |
((green & 0xfc00) >> 5) |
((blue & 0xf800) >> 11));
@@ -1979,9 +1979,9 @@ static int stste_setcolreg(unsigned int
green >>= 12;
if (ATARIHW_PRESENT(EXTD_SHIFTER))
shifter_tt.color_reg[regno] =
- (((red & 0xe) >> 1) | ((red & 1) << 3) << 8) |
- (((green & 0xe) >> 1) | ((green & 1) << 3) << 4) |
- ((blue & 0xe) >> 1) | ((blue & 1) << 3);
+ ((((red & 0xe) >> 1) | ((red & 1) << 3)) << 8) |
+ ((((green & 0xe) >> 1) | ((green & 1) << 3)) << 4) |
+ ((blue & 0xe) >> 1) | ((blue & 1) << 3);
else
shifter_tt.color_reg[regno] =
((red & 0xe) << 7) |
On Wed, Apr 06, 2022 at 10:11:29AM +0200, Greg Kroah-Hartman wrote:
> On Tue, Apr 05, 2022 at 11:24:13PM -0400, Steven Rostedt wrote:
> > On Tue, 5 Apr 2022 23:08:12 -0400
> > Steven Rostedt <[email protected]> wrote:
> >
> > > Here's a thought, if you decide to backport a patch to stable, and you see
> > > that there's another commit with a "Fixes" tag to the automatically
> > > selected commit. DO NOT BACKPORT IF THE FIXES PATCH FAILS TO GO BACK TOO!
> >
> > Seriously. This should be the case for *all* backported patches, not just
> > the AUTOSEL ones.
> >
> > Otherwise you are backporting a commit to "stable" that is KNOWN TO BE
> > BROKEN!
>
> My scripts usually do catch this, let me go see what went wrong...
Ok, my fault, my scripts _did_ catch this, but I ignored it as it was
filled with other noise. I've now queued this commit up.
thanks for catching this and sorry for missing it the first time around.
greg k-h
From: Dmitry Vyukov <[email protected]>
commit b81d591386c3a50b96dddcf663628ea0df0bf2b3 upstream.
KASAN requires more stack space because of compiler instrumentation.
Increase stack size as other arches do.
Signed-off-by: Dmitry Vyukov <[email protected]>
Reported-by: [email protected]
Fixes: 8ad8b72721d0 ("riscv: Add KASAN support")
Cc: [email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/riscv/include/asm/thread_info.h | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
--- a/arch/riscv/include/asm/thread_info.h
+++ b/arch/riscv/include/asm/thread_info.h
@@ -11,11 +11,17 @@
#include <asm/page.h>
#include <linux/const.h>
+#ifdef CONFIG_KASAN
+#define KASAN_STACK_ORDER 1
+#else
+#define KASAN_STACK_ORDER 0
+#endif
+
/* thread information allocation */
#ifdef CONFIG_64BIT
-#define THREAD_SIZE_ORDER (2)
+#define THREAD_SIZE_ORDER (2 + KASAN_STACK_ORDER)
#else
-#define THREAD_SIZE_ORDER (1)
+#define THREAD_SIZE_ORDER (1 + KASAN_STACK_ORDER)
#endif
#define THREAD_SIZE (PAGE_SIZE << THREAD_SIZE_ORDER)
From: Dan Carpenter <[email protected]>
[ Upstream commit 78482af095abd9f4f29f1aa3fe575d25c6ae3028 ]
This code has two bugs:
1) "cnt" is 255 but the size of the buffer is 256 so the last byte is
not used.
2) If we try to print more than 255 characters then "cnt" will be
negative and that will trigger a WARN() in snprintf(). The fix for
this is to use scnprintf() instead of snprintf().
We can re-write this code to be cleaner:
1) Rename "offset" to "off" because that's shorter.
2) Get rid of the "cnt" variable and just use "size - off" directly.
3) Get rid of the "read" variable and just increment "off" directly.
Fixes: 96fe6a2109db ("fbdev: Add VESA Coordinated Video Timings (CVT) support")
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/video/fbdev/core/fbcvt.c | 53 +++++++++++++-------------------
1 file changed, 21 insertions(+), 32 deletions(-)
diff --git a/drivers/video/fbdev/core/fbcvt.c b/drivers/video/fbdev/core/fbcvt.c
index 55d2bd0ce5c0..64843464c661 100644
--- a/drivers/video/fbdev/core/fbcvt.c
+++ b/drivers/video/fbdev/core/fbcvt.c
@@ -214,9 +214,11 @@ static u32 fb_cvt_aspect_ratio(struct fb_cvt_data *cvt)
static void fb_cvt_print_name(struct fb_cvt_data *cvt)
{
u32 pixcount, pixcount_mod;
- int cnt = 255, offset = 0, read = 0;
- u8 *buf = kzalloc(256, GFP_KERNEL);
+ int size = 256;
+ int off = 0;
+ u8 *buf;
+ buf = kzalloc(size, GFP_KERNEL);
if (!buf)
return;
@@ -224,43 +226,30 @@ static void fb_cvt_print_name(struct fb_cvt_data *cvt)
pixcount_mod = (cvt->xres * (cvt->yres/cvt->interlace)) % 1000000;
pixcount_mod /= 1000;
- read = snprintf(buf+offset, cnt, "fbcvt: %dx%d@%d: CVT Name - ",
- cvt->xres, cvt->yres, cvt->refresh);
- offset += read;
- cnt -= read;
+ off += scnprintf(buf + off, size - off, "fbcvt: %dx%d@%d: CVT Name - ",
+ cvt->xres, cvt->yres, cvt->refresh);
- if (cvt->status)
- snprintf(buf+offset, cnt, "Not a CVT standard - %d.%03d Mega "
- "Pixel Image\n", pixcount, pixcount_mod);
- else {
- if (pixcount) {
- read = snprintf(buf+offset, cnt, "%d", pixcount);
- cnt -= read;
- offset += read;
- }
+ if (cvt->status) {
+ off += scnprintf(buf + off, size - off,
+ "Not a CVT standard - %d.%03d Mega Pixel Image\n",
+ pixcount, pixcount_mod);
+ } else {
+ if (pixcount)
+ off += scnprintf(buf + off, size - off, "%d", pixcount);
- read = snprintf(buf+offset, cnt, ".%03dM", pixcount_mod);
- cnt -= read;
- offset += read;
+ off += scnprintf(buf + off, size - off, ".%03dM", pixcount_mod);
if (cvt->aspect_ratio == 0)
- read = snprintf(buf+offset, cnt, "3");
+ off += scnprintf(buf + off, size - off, "3");
else if (cvt->aspect_ratio == 3)
- read = snprintf(buf+offset, cnt, "4");
+ off += scnprintf(buf + off, size - off, "4");
else if (cvt->aspect_ratio == 1 || cvt->aspect_ratio == 4)
- read = snprintf(buf+offset, cnt, "9");
+ off += scnprintf(buf + off, size - off, "9");
else if (cvt->aspect_ratio == 2)
- read = snprintf(buf+offset, cnt, "A");
- else
- read = 0;
- cnt -= read;
- offset += read;
-
- if (cvt->flags & FB_CVT_FLAG_REDUCED_BLANK) {
- read = snprintf(buf+offset, cnt, "-R");
- cnt -= read;
- offset += read;
- }
+ off += scnprintf(buf + off, size - off, "A");
+
+ if (cvt->flags & FB_CVT_FLAG_REDUCED_BLANK)
+ off += scnprintf(buf + off, size - off, "-R");
}
printk(KERN_INFO "%s\n", buf);
--
2.34.1
From: Alexander Lobakin <[email protected]>
[ Upstream commit 6dba29537c0f639b482bd8f8bbd50ab4ae74b48d ]
For now, if the XDP prog returns XDP_PASS on XSK, the metadata will
be lost as it doesn't get copied to the skb.
Copy it along with the frame headers. Account its size on skb
allocation, and when copying just treat it as a part of the frame
and do a pull after to "move" it to the "reserved" zone.
net_prefetch() xdp->data_meta and align the copy size to speed-up
memcpy() a little and better match i40e_construct_skb().
Fixes: 0a714186d3c0 ("i40e: add AF_XDP zero-copy Rx support")
Suggested-by: Jesper Dangaard Brouer <[email protected]>
Suggested-by: Maciej Fijalkowski <[email protected]>
Signed-off-by: Alexander Lobakin <[email protected]>
Reviewed-by: Michal Swiatkowski <[email protected]>
Tested-by: Kiran Bhandare <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/i40e/i40e_xsk.c | 14 ++++++++++----
1 file changed, 10 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/intel/i40e/i40e_xsk.c b/drivers/net/ethernet/intel/i40e/i40e_xsk.c
index d444e38360c1..75e4a698c3db 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_xsk.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_xsk.c
@@ -247,19 +247,25 @@ bool i40e_alloc_rx_buffers_zc(struct i40e_ring *rx_ring, u16 count)
static struct sk_buff *i40e_construct_skb_zc(struct i40e_ring *rx_ring,
struct xdp_buff *xdp)
{
+ unsigned int totalsize = xdp->data_end - xdp->data_meta;
unsigned int metasize = xdp->data - xdp->data_meta;
- unsigned int datasize = xdp->data_end - xdp->data;
struct sk_buff *skb;
+ net_prefetch(xdp->data_meta);
+
/* allocate a skb to store the frags */
- skb = __napi_alloc_skb(&rx_ring->q_vector->napi, datasize,
+ skb = __napi_alloc_skb(&rx_ring->q_vector->napi, totalsize,
GFP_ATOMIC | __GFP_NOWARN);
if (unlikely(!skb))
return NULL;
- memcpy(__skb_put(skb, datasize), xdp->data, datasize);
- if (metasize)
+ memcpy(__skb_put(skb, totalsize), xdp->data_meta,
+ ALIGN(totalsize, sizeof(long)));
+
+ if (metasize) {
skb_metadata_set(skb, metasize);
+ __skb_pull(skb, metasize);
+ }
xsk_buff_free(xdp);
return skb;
--
2.34.1
On Tue, 5 Apr 2022 22:52:12 -0400
Steven Rostedt <[email protected]> wrote:
> On Tue, 5 Apr 2022 19:30:25 -0700
> Guenter Roeck <[email protected]> wrote:
>
> > > s390 tests crashed. Other failed qemu tests did not compile.
> >
> > Bisect points to commit 93fe2389e6fd ("tracing: Have TRACE_DEFINE_ENUM
> > affect trace event types as well"). Bisect log attached. Reverting the
> > offending patch fixes the problem. Copying Steven for comments/input.
>
> Do you have this commit?
>
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=795301d3c2899
>
OK, I see what happened. I wrote that patch because a new event appeared
that used enums in the field format that gets exposed to user space. This
patch is only needed for events that do that. Which until this release,
nothing did.
That patch was then flagged as something to backport (but it was never
tagged as stable, so this was one of the "AUTOSEL" backports). And it
should have only been backported if any of these new events were also
backported. Otherwise, the patch is useless.
When this patch was in linux-next, it caused s390 and powerpc to crash. I
found the issue and fixed it with the linked patch above, and even added a
"Fixes" tag to tie the two commits together.
Both of problem patch and the fix went into mainline in the same pull
request.
Here's a thought, if you decide to backport a patch to stable, and you see
that there's another commit with a "Fixes" tag to the automatically
selected commit. DO NOT BACKPORT IF THE FIXES PATCH FAILS TO GO BACK TOO!
This never should have been backported without the fix. Please revert that
patch for any stable release that the fixes patch fails to apply.
-- Steve
On Tue, 5 Apr 2022 09:24:54 +0200, Greg Kroah-Hartman <[email protected]> wrote:
> This is the start of the stable review cycle for the 5.10.110 release.
> There are 599 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 07 Apr 2022 07:01:33 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.110-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
5.10.110-rc1 Successfully Compiled and booted on my Raspberry PI 4b (8g) (bcm2711)
Tested-by: Fox Chen <[email protected]>
On Tue, Apr 05, 2022 at 06:08:44AM -0700, Guenter Roeck wrote:
> On 4/5/22 00:24, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 5.10.110 release.
> > There are 599 patches in this series, all will be posted as a response
> > to this one. If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Thu, 07 Apr 2022 07:01:33 +0000.
> > Anything received after that time might be too late.
> >
>
> Building um:defconfig ... failed
> Building csky:defconfig ... failed
> Building microblaze:mmu_defconfig ... failed
> ------
> Error log:
>
> fs/binfmt_elf.c: In function 'fill_note_info':
> fs/binfmt_elf.c:2050:45: error: 'siginfo' undeclared (first use in this function)
> 2050 | sz = elf_dump_thread_status(siginfo->si_signo, ets);
> | ^~~~~~~
> fs/binfmt_elf.c:2050:45: note: each undeclared identifier is reported only once for each function it appears in
> fs/binfmt_elf.c:2056:53: error: 'regs' undeclared (first use in this function)
> 2056 | elf_core_copy_regs(&info->prstatus->pr_reg, regs);
> | ^~~~
>
> Build just started, so there are likely going to be more failures.
Thanks, I missed this in my backport. Now should be fixed up, I'll push
out a -rc2 after this goes through some local build tests.
greg k-h
Hi Greg,
On Tue, Apr 05, 2022 at 09:24:54AM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.110 release.
> There are 599 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 07 Apr 2022 07:01:33 +0000.
> Anything received after that time might be too late.
Build test:
mips (gcc version 11.2.1 20220314): 63 configs -> no failure
arm (gcc version 11.2.1 20220314): 105 configs -> no new failure
arm64 (gcc version 11.2.1 20220314): 3 configs -> no failure
x86_64 (gcc version 11.2.1 20220314): 4 configs -> no failure
Boot test:
x86_64: fails to boot on my test laptop. Detailed report at: https://lore.kernel.org/stable/Yky7RmYZnPp9HgzT@debian/
x86_64: Booted on qemu. No regression. [1]
arm64: Booted on rpi4b (4GB model). No regression. [2]
[1]. https://openqa.qa.codethink.co.uk/tests/978
[2]. https://openqa.qa.codethink.co.uk/tests/981
Tested-by: Sudip Mukherjee <[email protected]>
--
Regards
Sudip
On Tue, 5 Apr 2022 at 15:32, Greg Kroah-Hartman
<[email protected]> wrote:
>
> This is the start of the stable review cycle for the 5.10.110 release.
> There are 599 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 07 Apr 2022 07:01:33 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.110-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.
Tested-by: Linux Kernel Functional Testing <[email protected]>
## Build
* kernel: 5.10.110-rc1
* git: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
* git branch: linux-5.10.y
* git commit: 45fdcc9dc72a44448666a2bcff4030a659e29e46
* git describe: v5.10.109-600-g45fdcc9dc72a
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.10.y/build/v5.10.109-600-g45fdcc9dc72a
## Test Regressions (compared to v5.10.109-23-g09422778fc8c)
No test regressions found.
## Metric Regressions (compared to v5.10.109-23-g09422778fc8c)
No metric regressions found.
## Test Fixes (compared to v5.10.109-23-g09422778fc8c)
No test fixes found.
## Metric Fixes (compared to v5.10.109-23-g09422778fc8c)
No metric fixes found.
## Test result summary
total: 100719, pass: 84805, fail: 965, skip: 14009, xfail: 940
## Build Summary
* arc: 10 total, 10 passed, 0 failed
* arm: 291 total, 291 passed, 0 failed
* arm64: 41 total, 41 passed, 0 failed
* dragonboard-410c: 1 total, 1 passed, 0 failed
* hi6220-hikey: 1 total, 1 passed, 0 failed
* i386: 40 total, 40 passed, 0 failed
* juno-r2: 1 total, 1 passed, 0 failed
* mips: 37 total, 37 passed, 0 failed
* parisc: 12 total, 12 passed, 0 failed
* powerpc: 60 total, 51 passed, 9 failed
* riscv: 27 total, 27 passed, 0 failed
* s390: 21 total, 21 passed, 0 failed
* sh: 24 total, 24 passed, 0 failed
* sparc: 12 total, 12 passed, 0 failed
* x15: 1 total, 1 passed, 0 failed
* x86: 1 total, 1 passed, 0 failed
* x86_64: 41 total, 41 passed, 0 failed
## Test suites summary
* fwts
* igt-gpu-tools
* kselftest-android
* kselftest-arm64
* kselftest-bpf
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-drivers
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-net
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-tc-testing
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-x86
* kselftest-zram
* kunit
* kvm-unit-tests
* libgpiod
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* network-basic-tests
* packetdrill
* perf
* perf/Zstd-perf.data-compression
* rcutorture
* ssuite
* v4l2-compliance
* vdso
--
Linaro LKFT
https://lkft.linaro.org
On Tue, Apr 05, 2022 at 06:07:50PM -0700, Guenter Roeck wrote:
> On Tue, Apr 05, 2022 at 09:24:54AM +0200, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 5.10.110 release.
> > There are 599 patches in this series, all will be posted as a response
> > to this one. If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Thu, 07 Apr 2022 07:01:33 +0000.
> > Anything received after that time might be too late.
> >
>
> s390 tests crashed. Other failed qemu tests did not compile.
Bisect points to commit 93fe2389e6fd ("tracing: Have TRACE_DEFINE_ENUM
affect trace event types as well"). Bisect log attached. Reverting the
offending patch fixes the problem. Copying Steven for comments/input.
Guenter
---
# bad: [45fdcc9dc72a44448666a2bcff4030a659e29e46] Linux 5.10.110-rc1
# good: [d9c5818a0bc09e4cc9fe663edb69e4d6cdae4f70] Linux 5.10.109
git bisect start 'HEAD' 'v5.10.109'
# good: [93a35ab24592dfddafdb9f184e9399aad6d88a18] drm/amd/display: Add affected crtcs to atomic state for dsc mst unplug
git bisect good 93a35ab24592dfddafdb9f184e9399aad6d88a18
# good: [c8816508edf3558f597bd20a01403b060d690700] regulator: rpi-panel: Handle I2C errors/timing to the Atmel
git bisect good c8816508edf3558f597bd20a01403b060d690700
# bad: [5e7fb97064ee7794db7ac938583c3d095980e55f] scsi: qla2xxx: Fix disk failure to rediscover
git bisect bad 5e7fb97064ee7794db7ac938583c3d095980e55f
# good: [3d65639a786b4587e64fb813a79a8f27b83dcaab] ARM: dts: qcom: fix gic_irq_domain_translate warnings for msm8960
git bisect good 3d65639a786b4587e64fb813a79a8f27b83dcaab
# good: [8bb857ae514a06d96a6ca81ff306acf5783d6cc6] media: Revert "media: em28xx: add missing em28xx_close_extension"
git bisect good 8bb857ae514a06d96a6ca81ff306acf5783d6cc6
# bad: [0042f52f784f847927f1ff234b3f97dd97ad8e48] powerpc/lib/sstep: Fix build errors with newer binutils
git bisect bad 0042f52f784f847927f1ff234b3f97dd97ad8e48
# bad: [690ee20444960ce5592465bce043ac5cd4ef8028] media: atomisp: fix bad usage at error handling logic
git bisect bad 690ee20444960ce5592465bce043ac5cd4ef8028
# bad: [93fe2389e6fd4c545920f6bd013b36f9328b636e] tracing: Have TRACE_DEFINE_ENUM affect trace event types as well
git bisect bad 93fe2389e6fd4c545920f6bd013b36f9328b636e
# good: [1fe212d441b683685c2900bd4353f53f7f608db9] media: hdpvr: initialize dev->worker at hdpvr_register_videodev
git bisect good 1fe212d441b683685c2900bd4353f53f7f608db9
# first bad commit: [93fe2389e6fd4c545920f6bd013b36f9328b636e] tracing: Have TRACE_DEFINE_ENUM affect trace event types as well
On 4/5/22 20:24, Steven Rostedt wrote:
> On Tue, 5 Apr 2022 23:08:12 -0400
> Steven Rostedt <[email protected]> wrote:
>
>> Here's a thought, if you decide to backport a patch to stable, and you see
>> that there's another commit with a "Fixes" tag to the automatically
>> selected commit. DO NOT BACKPORT IF THE FIXES PATCH FAILS TO GO BACK TOO!
>
> Seriously. This should be the case for *all* backported patches, not just
> the AUTOSEL ones.
>
> Otherwise you are backporting a commit to "stable" that is KNOWN TO BE
> BROKEN!
>
Agreed.
Guenter
On Tue, Apr 05, 2022 at 10:57:26PM +0100, Sudip Mukherjee wrote:
> Hi Greg,
>
> On Tue, Apr 05, 2022 at 09:24:54AM +0200, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 5.10.110 release.
> > There are 599 patches in this series, all will be posted as a response
> > to this one. If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Thu, 07 Apr 2022 07:01:33 +0000.
> > Anything received after that time might be too late.
>
> My tests are still running, but it failed to boot on my test laptop.
> The trace is:
>
> [ 2.194098] BUG: unable to handle page fault for address: ffffffffc0778fb5
> [ 2.194791] #PF: supervisor write access in kernel mode
> [ 2.195166] #PF: error_code(0x0003) - permissions violation
> [ 2.195558] PGD 1bac14067 P4D 1bac14067 PUD 1bac16067 PMD 10aab8067 PTE 8000000110976061
> [ 2.196124] Oops: 0003 [#1] SMP PTI
> [ 2.196374] CPU: 5 PID: 217 Comm: modprobe Not tainted 5.10.110-rc1+ #33
> [ 2.196846] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
> [ 2.197712] RIP: 0010:number+0x1d6/0x340
> [ 2.198025] Code: 83 c3 01 89 c8 44 29 d8 39 c2 7e ea 45 85 c9 0f 88 72 01 00 00 4d 63 c9 4a 8d 54 0c 18 4b 8d 44 0b 01 4c 39 db 76 06 0f b6 0a <41> 88 0b 49 83 c3 01 48 83 ea 01 49 39 c3 75 e8 83 ed 01 0f 88 3c
> [ 2.199654] RSP: 0018:ffffb61a4030fb08 EFLAGS: 00010206
> [ 2.200126] RAX: ffffffffc0778fb7 RBX: ffffffffc0778fb8 RCX: 0000000000000031
> [ 2.200630] RDX: ffffb61a4030fb21 RSI: 000000000000000a RDI: 0000000000000000
> [ 2.201131] RBP: 00000000fffffffb R08: 0000000000ffff0a R09: 0000000000000001
> [ 2.201635] R10: 3e2d434552202c29 R11: ffffffffc0778fb5 R12: 0000000000000020
> [ 2.202140] R13: 0000000000000000 R14: 000000000000000a R15: 0000000000000000
> [ 2.202641] FS: 00007fad7aa99580(0000) GS:ffff8c9537d40000(0000) knlGS:0000000000000000
> [ 2.203212] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> [ 2.203618] CR2: ffffffffc0778fb5 CR3: 000000011060c001 CR4: 0000000000370ee0
> [ 2.204149] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> [ 2.204682] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
> [ 2.205182] Call Trace:
> [ 2.205371] ? cpumask_next+0x17/0x20
> [ 2.205636] ? kvm_smp_send_call_func_ipi+0x1e/0x60
> [ 2.205986] vsnprintf+0x363/0x560
> [ 2.206233] snprintf+0x49/0x60
> [ 2.206461] eval_replace+0x46/0x80
> [ 2.206712] trace_event_eval_update+0x263/0x360
> [ 2.207057] trace_module_notify+0x44/0x50
> [ 2.207352] blocking_notifier_call_chain_robust+0x64/0xd0
> [ 2.207774] ? mutex_lock+0xe/0x30
> [ 2.208020] load_module+0x209c/0x28e0
> [ 2.208291] ? __do_sys_finit_module+0xb1/0x110
> [ 2.208613] __do_sys_finit_module+0xb1/0x110
> [ 2.208926] do_syscall_64+0x33/0x80
> [ 2.209184] entry_SYSCALL_64_after_hwframe+0x44/0xa9
> [ 2.209552] RIP: 0033:0x7fad7abb4f79
> [ 2.209810] Code: 48 8d 3d da db 0d 00 0f 05 eb a5 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d c7 9e 0d 00 f7 d8 64 89 01 48
> [ 2.211162] RSP: 002b:00007ffd607603c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
> [ 2.212293] RAX: ffffffffffffffda RBX: 0000557e2325bc20 RCX: 00007fad7abb4f79
> [ 2.213374] RDX: 0000000000000000 RSI: 0000557e2193c260 RDI: 0000000000000004
> [ 2.214495] RBP: 0000000000040000 R08: 0000000000000000 R09: 0000557e2325c620
> [ 2.215743] R10: 0000000000000004 R11: 0000000000000246 R12: 0000557e2193c260
> [ 2.216994] R13: 0000000000000000 R14: 0000557e2325bcb0 R15: 0000557e2325bc20
> [ 2.218219] Modules linked in: ext4(+) crc32c_generic crc16 mbcache jbd2 sd_mod bochs_drm t10_pi drm_vram_helper crc_t10dif drm_ttm_helper sr_mod crct10dif_generic cdrom ttm xhci_pci ata_generic drm_kms_helper xhci_hcd cec ata_piix libata rc_core usbcore crct10dif_pclmul crct10dif_common crc32_pclmul psmouse drm crc32c_intel usb_common i2c_piix4 e1000 scsi_mod floppy button
> [ 2.222206] CR2: ffffffffc0778fb5
> [ 2.223103] ---[ end trace 036356107aad6aa1 ]---
>
> Did a bisect and the bisect log is:
> # bad: [45fdcc9dc72a44448666a2bcff4030a659e29e46] Linux 5.10.110-rc1
> # good: [d9c5818a0bc09e4cc9fe663edb69e4d6cdae4f70] Linux 5.10.109
> git bisect start 'HEAD' 'v5.10.109'
> # good: [93a35ab24592dfddafdb9f184e9399aad6d88a18] drm/amd/display: Add affected crtcs to atomic state for dsc mst unplug
> git bisect good 93a35ab24592dfddafdb9f184e9399aad6d88a18
> # good: [c8816508edf3558f597bd20a01403b060d690700] regulator: rpi-panel: Handle I2C errors/timing to the Atmel
> git bisect good c8816508edf3558f597bd20a01403b060d690700
> # bad: [5e7fb97064ee7794db7ac938583c3d095980e55f] scsi: qla2xxx: Fix disk failure to rediscover
> git bisect bad 5e7fb97064ee7794db7ac938583c3d095980e55f
> # good: [3d65639a786b4587e64fb813a79a8f27b83dcaab] ARM: dts: qcom: fix gic_irq_domain_translate warnings for msm8960
> git bisect good 3d65639a786b4587e64fb813a79a8f27b83dcaab
> # good: [8bb857ae514a06d96a6ca81ff306acf5783d6cc6] media: Revert "media: em28xx: add missing em28xx_close_extension"
> git bisect good 8bb857ae514a06d96a6ca81ff306acf5783d6cc6
> # bad: [0042f52f784f847927f1ff234b3f97dd97ad8e48] powerpc/lib/sstep: Fix build errors with newer binutils
> git bisect bad 0042f52f784f847927f1ff234b3f97dd97ad8e48
> # bad: [690ee20444960ce5592465bce043ac5cd4ef8028] media: atomisp: fix bad usage at error handling logic
> git bisect bad 690ee20444960ce5592465bce043ac5cd4ef8028
> # bad: [93fe2389e6fd4c545920f6bd013b36f9328b636e] tracing: Have TRACE_DEFINE_ENUM affect trace event types as well
> git bisect bad 93fe2389e6fd4c545920f6bd013b36f9328b636e
> # good: [1fe212d441b683685c2900bd4353f53f7f608db9] media: hdpvr: initialize dev->worker at hdpvr_register_videodev
> git bisect good 1fe212d441b683685c2900bd4353f53f7f608db9
> # first bad commit: [93fe2389e6fd4c545920f6bd013b36f9328b636e] tracing: Have TRACE_DEFINE_ENUM affect trace event types as well
>
> And, reverting 93fe2389e6fd4c545920f6bd013b36f9328b636e on top of v5.10.110-rc1
> fixed the problem.
Now dropped, thanks.
greg k-h
On 05/04/22 14.24, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.110 release.
> There are 599 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
Successfully cross-compiled for arm64 (bcm2711_defconfig, gcc 10.2.0) and
powerpc (ps3_defconfig, gcc 11.2.0).
Tested-by: Bagas Sanjaya <[email protected]>
--
An old man doll... just what I always wanted! - Clara
On Wed, 6 Apr 2022 10:26:15 +0200
Greg Kroah-Hartman <[email protected]> wrote:
> Wait, no, I did catch this! And I sent you a "FAILED" email about it, 4
> of them:
> https://lore.kernel.org/r/[email protected]
> https://lore.kernel.org/r/[email protected]
> https://lore.kernel.org/r/[email protected]
> https://lore.kernel.org/r/[email protected]
> as the commit applied, but broke the build:
Yes, I know, that's how I knew it was an issue ;-)
>
> But I didn't drop the offending commit, I should have done that.
Correct.
Oh, so I guess it got in because it applied, but broke the build. Thus,
your scripts catch when a Fixes does not apply, but doesn't handle the
"broken build / boot" case?
>
> I'll go and drop the offending commit here, if you could submit both of
> them as working backports to stable@vger if/when you want them queued up
> there, that would be great.
The patch that got backported only fixes an issue with new events (hence
why I did not mark it for stable). If those events are not backported,
there's no reason to backport this one.
-- Steve
On 05/04/22 14.24, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.110 release.
> There are 599 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
Successfully cross-compiled for arm64 (bcm2711_defconfig, gcc 10.2.0) and
powerpc (ps3_defconfig, gcc 11.2.0).
Tested-by: Bagas Sanjaya <[email protected]>
--
An old man doll... just what I always wanted! - Clara
Hi!
> From: Liguang Zhang <[email protected]>
>
> commit 92912b175178c7e895f5e5e9f1e30ac30319162b upstream.
>
> Writes to a Downstream Port's Slot Control register are PCIe hotplug
> "commands." If the Port supports Command Completed events, software must
> wait for a command to complete before writing to Slot Control again.
>
> pcie_do_write_cmd() sets ctrl->cmd_busy when it writes to Slot Control. If
> software notification is enabled, i.e., PCI_EXP_SLTCTL_HPIE and
> PCI_EXP_SLTCTL_CCIE are set, ctrl->cmd_busy is cleared by pciehp_isr().
>
> But when software notification is disabled, as it is when pcie_init()
> powers off an empty slot, pcie_wait_cmd() uses pcie_poll_cmd() to poll for
> command completion, and it neglects to clear ctrl->cmd_busy, which leads to
> spurious timeouts:
I'm pretty sure this fixes the problem, but... it is still not fully
correct.
> +++ b/drivers/pci/hotplug/pciehp_hpc.c
> @@ -98,6 +98,8 @@ static int pcie_poll_cmd(struct controll
> if (slot_status & PCI_EXP_SLTSTA_CC) {
> pcie_capability_write_word(pdev, PCI_EXP_SLTSTA,
> PCI_EXP_SLTSTA_CC);
> + ctrl->cmd_busy = 0;
> + smp_mb();
> return 1;
> }
Is the memory barrier neccessary? I don't see corresponding memory
barrier for reading.
If it is neccessary, should we have WRITE_ONCE at the very least, or
probably normal atomic operations?
Best regards,
Pavel
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
On Sat, Apr 09, 2022 at 10:13:15AM +0200, Pavel Machek wrote:
> > From: Liguang Zhang <[email protected]>
> >
> > commit 92912b175178c7e895f5e5e9f1e30ac30319162b upstream.
> >
> > Writes to a Downstream Port's Slot Control register are PCIe hotplug
> > "commands." If the Port supports Command Completed events, software must
> > wait for a command to complete before writing to Slot Control again.
> >
> > pcie_do_write_cmd() sets ctrl->cmd_busy when it writes to Slot Control. If
> > software notification is enabled, i.e., PCI_EXP_SLTCTL_HPIE and
> > PCI_EXP_SLTCTL_CCIE are set, ctrl->cmd_busy is cleared by pciehp_isr().
> >
> > But when software notification is disabled, as it is when pcie_init()
> > powers off an empty slot, pcie_wait_cmd() uses pcie_poll_cmd() to poll for
> > command completion, and it neglects to clear ctrl->cmd_busy, which leads to
> > spurious timeouts:
>
> I'm pretty sure this fixes the problem, but... it is still not fully
> correct.
Thanks, Pavel. Liguang, Lukas, any comment?
> > +++ b/drivers/pci/hotplug/pciehp_hpc.c
> > @@ -98,6 +98,8 @@ static int pcie_poll_cmd(struct controll
> > if (slot_status & PCI_EXP_SLTSTA_CC) {
> > pcie_capability_write_word(pdev, PCI_EXP_SLTSTA,
> > PCI_EXP_SLTSTA_CC);
> > + ctrl->cmd_busy = 0;
> > + smp_mb();
> > return 1;
> > }
>
> Is the memory barrier neccessary? I don't see corresponding memory
> barrier for reading.
>
> If it is neccessary, should we have WRITE_ONCE at the very least, or
> probably normal atomic operations?
>
> Best regards,
> Pavel
> --
> DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
On Sat, Apr 09, 2022 at 10:13:15AM +0200, Pavel Machek wrote:
> > From: Liguang Zhang <[email protected]>
> >
> > Writes to a Downstream Port's Slot Control register are PCIe hotplug
> > "commands." If the Port supports Command Completed events, software must
> > wait for a command to complete before writing to Slot Control again.
> >
> > pcie_do_write_cmd() sets ctrl->cmd_busy when it writes to Slot Control. If
> > software notification is enabled, i.e., PCI_EXP_SLTCTL_HPIE and
> > PCI_EXP_SLTCTL_CCIE are set, ctrl->cmd_busy is cleared by pciehp_isr().
> >
> > But when software notification is disabled, as it is when pcie_init()
> > powers off an empty slot, pcie_wait_cmd() uses pcie_poll_cmd() to poll for
> > command completion, and it neglects to clear ctrl->cmd_busy, which leads to
> > spurious timeouts:
>
> I'm pretty sure this fixes the problem, but... it is still not fully
> correct.
>
> > +++ b/drivers/pci/hotplug/pciehp_hpc.c
> > @@ -98,6 +98,8 @@ static int pcie_poll_cmd(struct controll
> > if (slot_status & PCI_EXP_SLTSTA_CC) {
> > pcie_capability_write_word(pdev, PCI_EXP_SLTSTA,
> > PCI_EXP_SLTSTA_CC);
> > + ctrl->cmd_busy = 0;
> > + smp_mb();
> > return 1;
> > }
>
> Is the memory barrier neccessary? I don't see corresponding memory
> barrier for reading.
>
> If it is neccessary, should we have WRITE_ONCE at the very least, or
> probably normal atomic operations?
The cmd_busy flag is set by pcie_do_write_cmd() before writing the
Slot Control register and it is then cleared by pciehp_isr().
The purpose of the memory barriers is to ensure that order.
IOW, we want to avoid a scenario where the write to cmd_busy in
pcie_do_write_cmd() hasn't been committed to memory yet, the Slot Control
write is performed, an interrupt occurs and is handled, the interrupt
handler writes cmd_busy = 0 and only then is the cmd_busy = 1 write
in pcie_do_write_cmd() committed to memory.
That said, you're right that such a scenario is impossible if
cmd_busy is cleared by the synchronous pcie_poll_cmd()
instead of the asynchronous pciehp_isr().
Care to submit a patch to remove the memory barrier in this single
location?
A WRITE_ONCE() (i.e. a mere compiler barrier instead of a proper
cacheline flush) is not sufficient to avoid the above scenario.
An atomic bitop would work, but wouldn't offer advantages compared
to the status quo.
Thanks,
Lukas