As part of the ongoing i2c transition to the simple probe
("probe_new"), this patch uses i2c_match_id to retrieve the
driver_data for the probed device. The id parameter is thus no longer
necessary and the simple probe can be used instead.
Signed-off-by: Stephen Kitt <[email protected]>
---
drivers/clk/clk-si544.c | 22 +++++++++++-----------
1 file changed, 11 insertions(+), 11 deletions(-)
diff --git a/drivers/clk/clk-si544.c b/drivers/clk/clk-si544.c
index d9ec9086184d..089786907641 100644
--- a/drivers/clk/clk-si544.c
+++ b/drivers/clk/clk-si544.c
@@ -451,11 +451,19 @@ static const struct regmap_config si544_regmap_config = {
.volatile_reg = si544_regmap_is_volatile,
};
-static int si544_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
+static const struct i2c_device_id si544_id[] = {
+ { "si544a", si544a },
+ { "si544b", si544b },
+ { "si544c", si544c },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, si544_id);
+
+static int si544_probe(struct i2c_client *client)
{
struct clk_si544 *data;
struct clk_init_data init;
+ const struct i2c_device_id *id = i2c_match_id(si544_id, client);
int err;
data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL);
@@ -499,14 +507,6 @@ static int si544_probe(struct i2c_client *client,
return 0;
}
-static const struct i2c_device_id si544_id[] = {
- { "si544a", si544a },
- { "si544b", si544b },
- { "si544c", si544c },
- { }
-};
-MODULE_DEVICE_TABLE(i2c, si544_id);
-
static const struct of_device_id clk_si544_of_match[] = {
{ .compatible = "silabs,si544a" },
{ .compatible = "silabs,si544b" },
@@ -520,7 +520,7 @@ static struct i2c_driver si544_driver = {
.name = "si544",
.of_match_table = clk_si544_of_match,
},
- .probe = si544_probe,
+ .probe_new = si544_probe,
.id_table = si544_id,
};
module_i2c_driver(si544_driver);
--
2.27.0
On Thu, Apr 07, 2022 at 05:18:29PM +0200, Stephen Kitt wrote:
> As part of the ongoing i2c transition to the simple probe
> ("probe_new"), this patch uses i2c_match_id to retrieve the
> driver_data for the probed device. The id parameter is thus no longer
> necessary and the simple probe can be used instead.
>
> Signed-off-by: Stephen Kitt <[email protected]>
Reviewed-by: Wolfram Sang <[email protected]>
Quoting Stephen Kitt (2022-04-07 08:18:29)
> As part of the ongoing i2c transition to the simple probe
> ("probe_new"), this patch uses i2c_match_id to retrieve the
> driver_data for the probed device. The id parameter is thus no longer
> necessary and the simple probe can be used instead.
>
> Signed-off-by: Stephen Kitt <[email protected]>
> ---
Applied to clk-next