In order to simplify the clock-related code there is a way to convert the
current fixed clocks array into using the common bulk clocks kernel API
with dynamic set of the clock handlers and device-managed clock-resource
tracking. It's a bit tricky due to the complication coming from the
requirement to support the platforms (da850, spear13xx) with the
non-OF-based clock source, but still doable.
Before this modification there are two methods have been used to get the
clocks connected to an AHCI device: clk_get() - to get the very first
clock in the list and of_clk_get() - to get the rest of them. Basically
the platforms with non-OF-based clocks definition could specify only a
single reference clock source. The platforms with OF-hw clocks have been
luckier and could setup up to AHCI_MAX_CLKS clocks. Such semantic can be
retained with using devm_clk_bulk_get_all() to retrieve the clocks defined
via the DT firmware and devm_clk_get_optional() otherwise. In both cases
using the device-managed version of the methods will cause the automatic
resources deallocation on the AHCI device removal event. The only
complicated part in the suggested approach is the explicit allocation and
initialization of the clk_bulk_data structure instance for the non-OF
reference clocks. It's required in order to use the Bulk Clocks API for
the both denoted cases of the clocks definition.
Note aside with the clock-related code reduction and natural
simplification, there are several bonuses the suggested modification
provides. First of all the limitation of having no greater than
AHCI_MAX_CLKS clocks is now removed, since the devm_clk_bulk_get_all()
method will allocate as many reference clocks data descriptors as there
are clocks specified for the device. Secondly the clock names are
auto-detected. So the LLDD (glue) drivers can make sure that the required
clocks are specified just by checking the clock IDs in the clk_bulk_data
array. Thirdly using the handy Bulk Clocks kernel API improves the
clocks-handling code readability. And the last but not least this
modification implements a true optional clocks support to the
ahci_platform_get_resources() method. Indeed the previous clocks getting
procedure just stopped getting the clocks on any errors (aside from
non-critical -EPROBE_DEFER) in a way so the callee wasn't even informed
about abnormal loop termination. The new implementation lacks of such
problem. The ahci_platform_get_resources() will return an error code if
the corresponding clocks getting method ends execution abnormally.
Signed-off-by: Serge Semin <[email protected]>
---
Changelog v2:
- Convert to checking the error-case first in the devm_clk_bulk_get_all()
method invocation. (@Damien)
- Fix some grammar mistakes in the comments.
---
drivers/ata/ahci.h | 4 +-
drivers/ata/libahci_platform.c | 84 ++++++++++++++++------------------
2 files changed, 41 insertions(+), 47 deletions(-)
diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
index ad11a4c52fbe..c3770a19781b 100644
--- a/drivers/ata/ahci.h
+++ b/drivers/ata/ahci.h
@@ -38,7 +38,6 @@
enum {
AHCI_MAX_PORTS = 32,
- AHCI_MAX_CLKS = 5,
AHCI_MAX_SG = 168, /* hardware max is 64K */
AHCI_DMA_BOUNDARY = 0xffffffff,
AHCI_MAX_CMDS = 32,
@@ -339,7 +338,8 @@ struct ahci_host_priv {
u32 em_msg_type; /* EM message type */
u32 remapped_nvme; /* NVMe remapped device count */
bool got_runtime_pm; /* Did we do pm_runtime_get? */
- struct clk *clks[AHCI_MAX_CLKS]; /* Optional */
+ unsigned int n_clks;
+ struct clk_bulk_data *clks; /* Optional */
struct reset_control *rsts; /* Optional */
struct regulator **target_pwrs; /* Optional */
struct regulator *ahci_regulator;/* Optional */
diff --git a/drivers/ata/libahci_platform.c b/drivers/ata/libahci_platform.c
index 8c9fbcc3043b..3cff86c225fd 100644
--- a/drivers/ata/libahci_platform.c
+++ b/drivers/ata/libahci_platform.c
@@ -8,6 +8,7 @@
* Anton Vorontsov <[email protected]>
*/
+#include <linux/clk-provider.h>
#include <linux/clk.h>
#include <linux/kernel.h>
#include <linux/gfp.h>
@@ -97,28 +98,14 @@ EXPORT_SYMBOL_GPL(ahci_platform_disable_phys);
* ahci_platform_enable_clks - Enable platform clocks
* @hpriv: host private area to store config values
*
- * This function enables all the clks found in hpriv->clks, starting at
- * index 0. If any clk fails to enable it disables all the clks already
- * enabled in reverse order, and then returns an error.
+ * This function enables all the clks found for the AHCI device.
*
* RETURNS:
* 0 on success otherwise a negative error code
*/
int ahci_platform_enable_clks(struct ahci_host_priv *hpriv)
{
- int c, rc;
-
- for (c = 0; c < AHCI_MAX_CLKS && hpriv->clks[c]; c++) {
- rc = clk_prepare_enable(hpriv->clks[c]);
- if (rc)
- goto disable_unprepare_clk;
- }
- return 0;
-
-disable_unprepare_clk:
- while (--c >= 0)
- clk_disable_unprepare(hpriv->clks[c]);
- return rc;
+ return clk_bulk_prepare_enable(hpriv->n_clks, hpriv->clks);
}
EXPORT_SYMBOL_GPL(ahci_platform_enable_clks);
@@ -126,16 +113,13 @@ EXPORT_SYMBOL_GPL(ahci_platform_enable_clks);
* ahci_platform_disable_clks - Disable platform clocks
* @hpriv: host private area to store config values
*
- * This function disables all the clks found in hpriv->clks, in reverse
- * order of ahci_platform_enable_clks (starting at the end of the array).
+ * This function disables all the clocks enabled before
+ * (bulk-clocks-disable function is supposed to do that in reverse
+ * from the enabling procedure order).
*/
void ahci_platform_disable_clks(struct ahci_host_priv *hpriv)
{
- int c;
-
- for (c = AHCI_MAX_CLKS - 1; c >= 0; c--)
- if (hpriv->clks[c])
- clk_disable_unprepare(hpriv->clks[c]);
+ clk_bulk_disable_unprepare(hpriv->n_clks, hpriv->clks);
}
EXPORT_SYMBOL_GPL(ahci_platform_disable_clks);
@@ -292,8 +276,6 @@ static void ahci_platform_put_resources(struct device *dev, void *res)
pm_runtime_disable(dev);
}
- for (c = 0; c < AHCI_MAX_CLKS && hpriv->clks[c]; c++)
- clk_put(hpriv->clks[c]);
/*
* The regulators are tied to child node device and not to the
* SATA device itself. So we can't use devm for automatically
@@ -374,8 +356,8 @@ static int ahci_platform_get_regulator(struct ahci_host_priv *hpriv, u32 port,
* 1) mmio registers (IORESOURCE_MEM 0, mandatory)
* 2) regulator for controlling the targets power (optional)
* regulator for controlling the AHCI controller (optional)
- * 3) 0 - AHCI_MAX_CLKS clocks, as specified in the devs devicetree node,
- * or for non devicetree enabled platforms a single clock
+ * 3) all clocks specified in the devicetree node, or a single
+ * clock for non-OF platforms (optional)
* 4) resets, if flags has AHCI_PLATFORM_GET_RESETS (optional)
* 5) phys (optional)
*
@@ -385,11 +367,10 @@ static int ahci_platform_get_regulator(struct ahci_host_priv *hpriv, u32 port,
struct ahci_host_priv *ahci_platform_get_resources(struct platform_device *pdev,
unsigned int flags)
{
+ int rc, child_nodes, enabled_ports = 0;
struct device *dev = &pdev->dev;
struct ahci_host_priv *hpriv;
- struct clk *clk;
struct device_node *child;
- int i, enabled_ports = 0, rc, child_nodes;
u32 mask_port_map = 0;
if (!devres_open_group(dev, NULL, GFP_KERNEL))
@@ -417,25 +398,38 @@ struct ahci_host_priv *ahci_platform_get_resources(struct platform_device *pdev,
goto err_out;
}
- for (i = 0; i < AHCI_MAX_CLKS; i++) {
+ /*
+ * Bulk clocks getting procedure can fail to find any clock due to
+ * running on a non-OF platform or due to the clocks being defined in
+ * bypass of the DT firmware (like da850, spear13xx). In that case we
+ * fallback to getting a single clock source right from the dev clocks
+ * list.
+ */
+ rc = devm_clk_bulk_get_all(dev, &hpriv->clks);
+ if (rc < 0)
+ goto err_out;
+
+ if (rc > 0) {
+ /* Got clocks in bulk */
+ hpriv->n_clks = rc;
+ } else {
/*
- * For now we must use clk_get(dev, NULL) for the first clock,
- * because some platforms (da850, spear13xx) are not yet
- * converted to use devicetree for clocks. For new platforms
- * this is equivalent to of_clk_get(dev->of_node, 0).
+ * No clock bulk found: fallback to manually getting
+ * the optional clock.
*/
- if (i == 0)
- clk = clk_get(dev, NULL);
- else
- clk = of_clk_get(dev->of_node, i);
-
- if (IS_ERR(clk)) {
- rc = PTR_ERR(clk);
- if (rc == -EPROBE_DEFER)
- goto err_out;
- break;
+ hpriv->clks = devm_kzalloc(dev, sizeof(*hpriv->clks), GFP_KERNEL);
+ if (!hpriv->clks) {
+ rc = -ENOMEM;
+ goto err_out;
+ }
+ hpriv->clks->clk = devm_clk_get_optional(dev, NULL);
+ if (IS_ERR(hpriv->clks->clk)) {
+ rc = PTR_ERR(hpriv->clks->clk);
+ goto err_out;
+ } else if (hpriv->clks->clk) {
+ hpriv->clks->id = __clk_get_name(hpriv->clks->clk);
+ hpriv->n_clks = 1;
}
- hpriv->clks[i] = clk;
}
hpriv->ahci_regulator = devm_regulator_get(dev, "ahci");
--
2.35.1
Hi Serge,
I love your patch! Yet something to improve:
[auto build test ERROR on axboe-block/for-next]
[also build test ERROR on robh/for-next linus/master v5.18-rc5 next-20220503]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/intel-lab-lkp/linux/commits/Serge-Semin/ata-ahci-Add-DWC-Baikal-T1-AHCI-SATA-support/20220504-041431
base: https://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-block.git for-next
config: arm64-randconfig-r034-20220501 (https://download.01.org/0day-ci/archive/20220504/[email protected]/config)
compiler: clang version 15.0.0 (https://github.com/llvm/llvm-project 363b3a645a1e30011cc8da624f13dac5fd915628)
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# install arm64 cross compiling tool for clang build
# apt-get install binutils-aarch64-linux-gnu
# https://github.com/intel-lab-lkp/linux/commit/2aa1a2fe25d3757c2c3a6c59ec00c135ba17fe96
git remote add linux-review https://github.com/intel-lab-lkp/linux
git fetch --no-tags linux-review Serge-Semin/ata-ahci-Add-DWC-Baikal-T1-AHCI-SATA-support/20220504-041431
git checkout 2aa1a2fe25d3757c2c3a6c59ec00c135ba17fe96
# save the config file
mkdir build_dir && cp config build_dir/.config
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross W=1 O=build_dir ARCH=arm64 SHELL=/bin/bash drivers/ata/
If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <[email protected]>
All errors (new ones prefixed by >>):
>> drivers/ata/ahci_da850.c:181:6: error: invalid argument type 'struct clk_bulk_data' to unary expression
if (!hpriv->clks[0]) {
^~~~~~~~~~~~~~~
>> drivers/ata/ahci_da850.c:186:18: error: assigning to 'struct clk_bulk_data' from incompatible type 'struct clk *'
hpriv->clks[0] = clk;
^ ~~~
drivers/ata/ahci_da850.c:194:6: error: invalid argument type 'struct clk_bulk_data' to unary expression
if (!hpriv->clks[1]) {
^~~~~~~~~~~~~~~
drivers/ata/ahci_da850.c:201:18: error: assigning to 'struct clk_bulk_data' from incompatible type 'struct clk *'
hpriv->clks[1] = clk;
^ ~~~
>> drivers/ata/ahci_da850.c:204:46: error: passing 'struct clk_bulk_data' to parameter of incompatible type 'struct clk *'
mpy = ahci_da850_calculate_mpy(clk_get_rate(hpriv->clks[1]));
^~~~~~~~~~~~~~
include/linux/clk.h:584:40: note: passing argument to parameter 'clk' here
unsigned long clk_get_rate(struct clk *clk);
^
5 errors generated.
--
>> drivers/ata/ahci_dm816.c:72:6: error: invalid argument type 'struct clk_bulk_data' to unary expression
if (!hpriv->clks[1]) {
^~~~~~~~~~~~~~~
>> drivers/ata/ahci_dm816.c:77:29: error: passing 'struct clk_bulk_data' to parameter of incompatible type 'struct clk *'
refclk_rate = clk_get_rate(hpriv->clks[1]);
^~~~~~~~~~~~~~
include/linux/clk.h:584:40: note: passing argument to parameter 'clk' here
unsigned long clk_get_rate(struct clk *clk);
^
2 errors generated.
vim +181 drivers/ata/ahci_da850.c
018d5ef2048fca Akinobu Mita 2015-01-29 159
ae8723f8a9c8e8 Bartlomiej Zolnierkiewicz 2014-03-25 160 static int ahci_da850_probe(struct platform_device *pdev)
ae8723f8a9c8e8 Bartlomiej Zolnierkiewicz 2014-03-25 161 {
ae8723f8a9c8e8 Bartlomiej Zolnierkiewicz 2014-03-25 162 struct device *dev = &pdev->dev;
ae8723f8a9c8e8 Bartlomiej Zolnierkiewicz 2014-03-25 163 struct ahci_host_priv *hpriv;
ae8723f8a9c8e8 Bartlomiej Zolnierkiewicz 2014-03-25 164 void __iomem *pwrdn_reg;
cdf0ead3747200 Bartosz Golaszewski 2017-01-30 165 struct resource *res;
82dbe1a68fd65a Bartosz Golaszewski 2017-01-30 166 struct clk *clk;
cdf0ead3747200 Bartosz Golaszewski 2017-01-30 167 u32 mpy;
ae8723f8a9c8e8 Bartlomiej Zolnierkiewicz 2014-03-25 168 int rc;
ae8723f8a9c8e8 Bartlomiej Zolnierkiewicz 2014-03-25 169
16af2d65842d34 Kunihiko Hayashi 2018-08-22 170 hpriv = ahci_platform_get_resources(pdev, 0);
ae8723f8a9c8e8 Bartlomiej Zolnierkiewicz 2014-03-25 171 if (IS_ERR(hpriv))
ae8723f8a9c8e8 Bartlomiej Zolnierkiewicz 2014-03-25 172 return PTR_ERR(hpriv);
ae8723f8a9c8e8 Bartlomiej Zolnierkiewicz 2014-03-25 173
82dbe1a68fd65a Bartosz Golaszewski 2017-01-30 174 /*
82dbe1a68fd65a Bartosz Golaszewski 2017-01-30 175 * Internally ahci_platform_get_resources() calls clk_get(dev, NULL)
82dbe1a68fd65a Bartosz Golaszewski 2017-01-30 176 * when trying to obtain the functional clock. This SATA controller
82dbe1a68fd65a Bartosz Golaszewski 2017-01-30 177 * uses two clocks for which we specify two connection ids. If we don't
82dbe1a68fd65a Bartosz Golaszewski 2017-01-30 178 * have the functional clock at this point - call clk_get() again with
82dbe1a68fd65a Bartosz Golaszewski 2017-01-30 179 * con_id = "fck".
82dbe1a68fd65a Bartosz Golaszewski 2017-01-30 180 */
82dbe1a68fd65a Bartosz Golaszewski 2017-01-30 @181 if (!hpriv->clks[0]) {
82dbe1a68fd65a Bartosz Golaszewski 2017-01-30 182 clk = clk_get(dev, "fck");
82dbe1a68fd65a Bartosz Golaszewski 2017-01-30 183 if (IS_ERR(clk))
82dbe1a68fd65a Bartosz Golaszewski 2017-01-30 184 return PTR_ERR(clk);
82dbe1a68fd65a Bartosz Golaszewski 2017-01-30 185
82dbe1a68fd65a Bartosz Golaszewski 2017-01-30 @186 hpriv->clks[0] = clk;
82dbe1a68fd65a Bartosz Golaszewski 2017-01-30 187 }
82dbe1a68fd65a Bartosz Golaszewski 2017-01-30 188
cdf0ead3747200 Bartosz Golaszewski 2017-01-30 189 /*
cdf0ead3747200 Bartosz Golaszewski 2017-01-30 190 * The second clock used by ahci-da850 is the external REFCLK. If we
cdf0ead3747200 Bartosz Golaszewski 2017-01-30 191 * didn't get it from ahci_platform_get_resources(), let's try to
cdf0ead3747200 Bartosz Golaszewski 2017-01-30 192 * specify the con_id in clk_get().
cdf0ead3747200 Bartosz Golaszewski 2017-01-30 193 */
cdf0ead3747200 Bartosz Golaszewski 2017-01-30 194 if (!hpriv->clks[1]) {
cdf0ead3747200 Bartosz Golaszewski 2017-01-30 195 clk = clk_get(dev, "refclk");
cdf0ead3747200 Bartosz Golaszewski 2017-01-30 196 if (IS_ERR(clk)) {
cdf0ead3747200 Bartosz Golaszewski 2017-01-30 197 dev_err(dev, "unable to obtain the reference clock");
cdf0ead3747200 Bartosz Golaszewski 2017-01-30 198 return -ENODEV;
cdf0ead3747200 Bartosz Golaszewski 2017-01-30 199 }
cdf0ead3747200 Bartosz Golaszewski 2017-01-30 200
cdf0ead3747200 Bartosz Golaszewski 2017-01-30 201 hpriv->clks[1] = clk;
cdf0ead3747200 Bartosz Golaszewski 2017-01-30 202 }
cdf0ead3747200 Bartosz Golaszewski 2017-01-30 203
cdf0ead3747200 Bartosz Golaszewski 2017-01-30 @204 mpy = ahci_da850_calculate_mpy(clk_get_rate(hpriv->clks[1]));
cdf0ead3747200 Bartosz Golaszewski 2017-01-30 205 if (mpy == 0) {
cdf0ead3747200 Bartosz Golaszewski 2017-01-30 206 dev_err(dev, "invalid REFCLK multiplier value: 0x%x", mpy);
cdf0ead3747200 Bartosz Golaszewski 2017-01-30 207 return -EINVAL;
cdf0ead3747200 Bartosz Golaszewski 2017-01-30 208 }
cdf0ead3747200 Bartosz Golaszewski 2017-01-30 209
ae8723f8a9c8e8 Bartlomiej Zolnierkiewicz 2014-03-25 210 rc = ahci_platform_enable_resources(hpriv);
ae8723f8a9c8e8 Bartlomiej Zolnierkiewicz 2014-03-25 211 if (rc)
ae8723f8a9c8e8 Bartlomiej Zolnierkiewicz 2014-03-25 212 return rc;
ae8723f8a9c8e8 Bartlomiej Zolnierkiewicz 2014-03-25 213
ae8723f8a9c8e8 Bartlomiej Zolnierkiewicz 2014-03-25 214 res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
c88c094985ad38 Christophe JAILLET 2017-08-16 215 if (!res) {
c88c094985ad38 Christophe JAILLET 2017-08-16 216 rc = -ENODEV;
ae8723f8a9c8e8 Bartlomiej Zolnierkiewicz 2014-03-25 217 goto disable_resources;
c88c094985ad38 Christophe JAILLET 2017-08-16 218 }
ae8723f8a9c8e8 Bartlomiej Zolnierkiewicz 2014-03-25 219
ae8723f8a9c8e8 Bartlomiej Zolnierkiewicz 2014-03-25 220 pwrdn_reg = devm_ioremap(dev, res->start, resource_size(res));
c88c094985ad38 Christophe JAILLET 2017-08-16 221 if (!pwrdn_reg) {
c88c094985ad38 Christophe JAILLET 2017-08-16 222 rc = -ENOMEM;
ae8723f8a9c8e8 Bartlomiej Zolnierkiewicz 2014-03-25 223 goto disable_resources;
c88c094985ad38 Christophe JAILLET 2017-08-16 224 }
ae8723f8a9c8e8 Bartlomiej Zolnierkiewicz 2014-03-25 225
cdf0ead3747200 Bartosz Golaszewski 2017-01-30 226 da850_sata_init(dev, pwrdn_reg, hpriv->mmio, mpy);
ae8723f8a9c8e8 Bartlomiej Zolnierkiewicz 2014-03-25 227
018d5ef2048fca Akinobu Mita 2015-01-29 228 rc = ahci_platform_init_host(pdev, hpriv, &ahci_da850_port_info,
018d5ef2048fca Akinobu Mita 2015-01-29 229 &ahci_platform_sht);
ae8723f8a9c8e8 Bartlomiej Zolnierkiewicz 2014-03-25 230 if (rc)
ae8723f8a9c8e8 Bartlomiej Zolnierkiewicz 2014-03-25 231 goto disable_resources;
ae8723f8a9c8e8 Bartlomiej Zolnierkiewicz 2014-03-25 232
ae8723f8a9c8e8 Bartlomiej Zolnierkiewicz 2014-03-25 233 return 0;
ae8723f8a9c8e8 Bartlomiej Zolnierkiewicz 2014-03-25 234 disable_resources:
ae8723f8a9c8e8 Bartlomiej Zolnierkiewicz 2014-03-25 235 ahci_platform_disable_resources(hpriv);
ae8723f8a9c8e8 Bartlomiej Zolnierkiewicz 2014-03-25 236 return rc;
ae8723f8a9c8e8 Bartlomiej Zolnierkiewicz 2014-03-25 237 }
ae8723f8a9c8e8 Bartlomiej Zolnierkiewicz 2014-03-25 238
--
0-DAY CI Kernel Test Service
https://01.org/lkp
Hi Serge,
I love your patch! Yet something to improve:
[auto build test ERROR on axboe-block/for-next]
[also build test ERROR on robh/for-next linus/master v5.18-rc5 next-20220503]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/intel-lab-lkp/linux/commits/Serge-Semin/ata-ahci-Add-DWC-Baikal-T1-AHCI-SATA-support/20220504-041431
base: https://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-block.git for-next
config: microblaze-randconfig-r031-20220501 (https://download.01.org/0day-ci/archive/20220504/[email protected]/config)
compiler: microblaze-linux-gcc (GCC) 11.3.0
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# https://github.com/intel-lab-lkp/linux/commit/2aa1a2fe25d3757c2c3a6c59ec00c135ba17fe96
git remote add linux-review https://github.com/intel-lab-lkp/linux
git fetch --no-tags linux-review Serge-Semin/ata-ahci-Add-DWC-Baikal-T1-AHCI-SATA-support/20220504-041431
git checkout 2aa1a2fe25d3757c2c3a6c59ec00c135ba17fe96
# save the config file
mkdir build_dir && cp config build_dir/.config
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-11.3.0 make.cross W=1 O=build_dir ARCH=microblaze SHELL=/bin/bash drivers/ata/
If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <[email protected]>
All errors (new ones prefixed by >>):
drivers/ata/ahci_da850.c: In function 'ahci_da850_probe':
>> drivers/ata/ahci_da850.c:181:13: error: wrong type argument to unary exclamation mark
181 | if (!hpriv->clks[0]) {
| ^
>> drivers/ata/ahci_da850.c:186:34: error: incompatible types when assigning to type 'struct clk_bulk_data' from type 'struct clk *'
186 | hpriv->clks[0] = clk;
| ^~~
drivers/ata/ahci_da850.c:194:13: error: wrong type argument to unary exclamation mark
194 | if (!hpriv->clks[1]) {
| ^
drivers/ata/ahci_da850.c:201:34: error: incompatible types when assigning to type 'struct clk_bulk_data' from type 'struct clk *'
201 | hpriv->clks[1] = clk;
| ^~~
>> drivers/ata/ahci_da850.c:204:64: error: incompatible type for argument 1 of 'clk_get_rate'
204 | mpy = ahci_da850_calculate_mpy(clk_get_rate(hpriv->clks[1]));
| ~~~~~~~~~~~^~~
| |
| struct clk_bulk_data
In file included from drivers/ata/ahci.h:23,
from drivers/ata/ahci_da850.c:13:
include/linux/clk.h:584:40: note: expected 'struct clk *' but argument is of type 'struct clk_bulk_data'
584 | unsigned long clk_get_rate(struct clk *clk);
| ~~~~~~~~~~~~^~~
--
drivers/ata/ahci_dm816.c: In function 'ahci_dm816_phy_init':
>> drivers/ata/ahci_dm816.c:72:13: error: wrong type argument to unary exclamation mark
72 | if (!hpriv->clks[1]) {
| ^
>> drivers/ata/ahci_dm816.c:77:47: error: incompatible type for argument 1 of 'clk_get_rate'
77 | refclk_rate = clk_get_rate(hpriv->clks[1]);
| ~~~~~~~~~~~^~~
| |
| struct clk_bulk_data
In file included from drivers/ata/ahci.h:23,
from drivers/ata/ahci_dm816.c:16:
include/linux/clk.h:584:40: note: expected 'struct clk *' but argument is of type 'struct clk_bulk_data'
584 | unsigned long clk_get_rate(struct clk *clk);
| ~~~~~~~~~~~~^~~
vim +186 drivers/ata/ahci_da850.c
018d5ef2048fca Akinobu Mita 2015-01-29 159
ae8723f8a9c8e8 Bartlomiej Zolnierkiewicz 2014-03-25 160 static int ahci_da850_probe(struct platform_device *pdev)
ae8723f8a9c8e8 Bartlomiej Zolnierkiewicz 2014-03-25 161 {
ae8723f8a9c8e8 Bartlomiej Zolnierkiewicz 2014-03-25 162 struct device *dev = &pdev->dev;
ae8723f8a9c8e8 Bartlomiej Zolnierkiewicz 2014-03-25 163 struct ahci_host_priv *hpriv;
ae8723f8a9c8e8 Bartlomiej Zolnierkiewicz 2014-03-25 164 void __iomem *pwrdn_reg;
cdf0ead3747200 Bartosz Golaszewski 2017-01-30 165 struct resource *res;
82dbe1a68fd65a Bartosz Golaszewski 2017-01-30 166 struct clk *clk;
cdf0ead3747200 Bartosz Golaszewski 2017-01-30 167 u32 mpy;
ae8723f8a9c8e8 Bartlomiej Zolnierkiewicz 2014-03-25 168 int rc;
ae8723f8a9c8e8 Bartlomiej Zolnierkiewicz 2014-03-25 169
16af2d65842d34 Kunihiko Hayashi 2018-08-22 170 hpriv = ahci_platform_get_resources(pdev, 0);
ae8723f8a9c8e8 Bartlomiej Zolnierkiewicz 2014-03-25 171 if (IS_ERR(hpriv))
ae8723f8a9c8e8 Bartlomiej Zolnierkiewicz 2014-03-25 172 return PTR_ERR(hpriv);
ae8723f8a9c8e8 Bartlomiej Zolnierkiewicz 2014-03-25 173
82dbe1a68fd65a Bartosz Golaszewski 2017-01-30 174 /*
82dbe1a68fd65a Bartosz Golaszewski 2017-01-30 175 * Internally ahci_platform_get_resources() calls clk_get(dev, NULL)
82dbe1a68fd65a Bartosz Golaszewski 2017-01-30 176 * when trying to obtain the functional clock. This SATA controller
82dbe1a68fd65a Bartosz Golaszewski 2017-01-30 177 * uses two clocks for which we specify two connection ids. If we don't
82dbe1a68fd65a Bartosz Golaszewski 2017-01-30 178 * have the functional clock at this point - call clk_get() again with
82dbe1a68fd65a Bartosz Golaszewski 2017-01-30 179 * con_id = "fck".
82dbe1a68fd65a Bartosz Golaszewski 2017-01-30 180 */
82dbe1a68fd65a Bartosz Golaszewski 2017-01-30 @181 if (!hpriv->clks[0]) {
82dbe1a68fd65a Bartosz Golaszewski 2017-01-30 182 clk = clk_get(dev, "fck");
82dbe1a68fd65a Bartosz Golaszewski 2017-01-30 183 if (IS_ERR(clk))
82dbe1a68fd65a Bartosz Golaszewski 2017-01-30 184 return PTR_ERR(clk);
82dbe1a68fd65a Bartosz Golaszewski 2017-01-30 185
82dbe1a68fd65a Bartosz Golaszewski 2017-01-30 @186 hpriv->clks[0] = clk;
82dbe1a68fd65a Bartosz Golaszewski 2017-01-30 187 }
82dbe1a68fd65a Bartosz Golaszewski 2017-01-30 188
cdf0ead3747200 Bartosz Golaszewski 2017-01-30 189 /*
cdf0ead3747200 Bartosz Golaszewski 2017-01-30 190 * The second clock used by ahci-da850 is the external REFCLK. If we
cdf0ead3747200 Bartosz Golaszewski 2017-01-30 191 * didn't get it from ahci_platform_get_resources(), let's try to
cdf0ead3747200 Bartosz Golaszewski 2017-01-30 192 * specify the con_id in clk_get().
cdf0ead3747200 Bartosz Golaszewski 2017-01-30 193 */
cdf0ead3747200 Bartosz Golaszewski 2017-01-30 194 if (!hpriv->clks[1]) {
cdf0ead3747200 Bartosz Golaszewski 2017-01-30 195 clk = clk_get(dev, "refclk");
cdf0ead3747200 Bartosz Golaszewski 2017-01-30 196 if (IS_ERR(clk)) {
cdf0ead3747200 Bartosz Golaszewski 2017-01-30 197 dev_err(dev, "unable to obtain the reference clock");
cdf0ead3747200 Bartosz Golaszewski 2017-01-30 198 return -ENODEV;
cdf0ead3747200 Bartosz Golaszewski 2017-01-30 199 }
cdf0ead3747200 Bartosz Golaszewski 2017-01-30 200
cdf0ead3747200 Bartosz Golaszewski 2017-01-30 201 hpriv->clks[1] = clk;
cdf0ead3747200 Bartosz Golaszewski 2017-01-30 202 }
cdf0ead3747200 Bartosz Golaszewski 2017-01-30 203
cdf0ead3747200 Bartosz Golaszewski 2017-01-30 @204 mpy = ahci_da850_calculate_mpy(clk_get_rate(hpriv->clks[1]));
cdf0ead3747200 Bartosz Golaszewski 2017-01-30 205 if (mpy == 0) {
cdf0ead3747200 Bartosz Golaszewski 2017-01-30 206 dev_err(dev, "invalid REFCLK multiplier value: 0x%x", mpy);
cdf0ead3747200 Bartosz Golaszewski 2017-01-30 207 return -EINVAL;
cdf0ead3747200 Bartosz Golaszewski 2017-01-30 208 }
cdf0ead3747200 Bartosz Golaszewski 2017-01-30 209
ae8723f8a9c8e8 Bartlomiej Zolnierkiewicz 2014-03-25 210 rc = ahci_platform_enable_resources(hpriv);
ae8723f8a9c8e8 Bartlomiej Zolnierkiewicz 2014-03-25 211 if (rc)
ae8723f8a9c8e8 Bartlomiej Zolnierkiewicz 2014-03-25 212 return rc;
ae8723f8a9c8e8 Bartlomiej Zolnierkiewicz 2014-03-25 213
ae8723f8a9c8e8 Bartlomiej Zolnierkiewicz 2014-03-25 214 res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
c88c094985ad38 Christophe JAILLET 2017-08-16 215 if (!res) {
c88c094985ad38 Christophe JAILLET 2017-08-16 216 rc = -ENODEV;
ae8723f8a9c8e8 Bartlomiej Zolnierkiewicz 2014-03-25 217 goto disable_resources;
c88c094985ad38 Christophe JAILLET 2017-08-16 218 }
ae8723f8a9c8e8 Bartlomiej Zolnierkiewicz 2014-03-25 219
ae8723f8a9c8e8 Bartlomiej Zolnierkiewicz 2014-03-25 220 pwrdn_reg = devm_ioremap(dev, res->start, resource_size(res));
c88c094985ad38 Christophe JAILLET 2017-08-16 221 if (!pwrdn_reg) {
c88c094985ad38 Christophe JAILLET 2017-08-16 222 rc = -ENOMEM;
ae8723f8a9c8e8 Bartlomiej Zolnierkiewicz 2014-03-25 223 goto disable_resources;
c88c094985ad38 Christophe JAILLET 2017-08-16 224 }
ae8723f8a9c8e8 Bartlomiej Zolnierkiewicz 2014-03-25 225
cdf0ead3747200 Bartosz Golaszewski 2017-01-30 226 da850_sata_init(dev, pwrdn_reg, hpriv->mmio, mpy);
ae8723f8a9c8e8 Bartlomiej Zolnierkiewicz 2014-03-25 227
018d5ef2048fca Akinobu Mita 2015-01-29 228 rc = ahci_platform_init_host(pdev, hpriv, &ahci_da850_port_info,
018d5ef2048fca Akinobu Mita 2015-01-29 229 &ahci_platform_sht);
ae8723f8a9c8e8 Bartlomiej Zolnierkiewicz 2014-03-25 230 if (rc)
ae8723f8a9c8e8 Bartlomiej Zolnierkiewicz 2014-03-25 231 goto disable_resources;
ae8723f8a9c8e8 Bartlomiej Zolnierkiewicz 2014-03-25 232
ae8723f8a9c8e8 Bartlomiej Zolnierkiewicz 2014-03-25 233 return 0;
ae8723f8a9c8e8 Bartlomiej Zolnierkiewicz 2014-03-25 234 disable_resources:
ae8723f8a9c8e8 Bartlomiej Zolnierkiewicz 2014-03-25 235 ahci_platform_disable_resources(hpriv);
ae8723f8a9c8e8 Bartlomiej Zolnierkiewicz 2014-03-25 236 return rc;
ae8723f8a9c8e8 Bartlomiej Zolnierkiewicz 2014-03-25 237 }
ae8723f8a9c8e8 Bartlomiej Zolnierkiewicz 2014-03-25 238
--
0-DAY CI Kernel Test Service
https://01.org/lkp