From: Marcel Ziswiler <[email protected]>
Adding no-1-8-v property to usdhc1 to disable +1.8V signaling (UHS-I)
mode on SoM dtsi level.
Clean up no-1-8-v from Aster carrier board dtsi, which is using defaults
from SoM dtsi and is not UHS-I capable.
A carrier board may have a MMC/SD card slot with a switchable power
supply. Add a pinctrl sleep used when the card power is off to avoid
backfeeding to the card and add the "sleep" pinctrl to the usdhc1
controller.
Signed-off-by: Marcel Ziswiler <[email protected]>
---
arch/arm/boot/dts/imx7-colibri-aster.dtsi | 5 +-
arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi | 3 -
arch/arm/boot/dts/imx7-colibri.dtsi | 75 ++++++++++++++-------
3 files changed, 51 insertions(+), 32 deletions(-)
diff --git a/arch/arm/boot/dts/imx7-colibri-aster.dtsi b/arch/arm/boot/dts/imx7-colibri-aster.dtsi
index 440f98dc323d..f3a5cb7d6a0c 100644
--- a/arch/arm/boot/dts/imx7-colibri-aster.dtsi
+++ b/arch/arm/boot/dts/imx7-colibri-aster.dtsi
@@ -61,10 +61,7 @@ &usbotg1 {
status = "okay";
};
+/* Colibri MMC/SD */
&usdhc1 {
- keep-power-in-suspend;
- no-1-8-v;
- wakeup-source;
- vmmc-supply = <®_3v3>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
index 33a9cbbca0d2..618831e89ce8 100644
--- a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
+++ b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
@@ -97,8 +97,5 @@ &usbotg1 {
};
&usdhc1 {
- keep-power-in-suspend;
- wakeup-source;
- vmmc-supply = <®_3v3>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi
index 09dbd262dad1..3da9ddc06aae 100644
--- a/arch/arm/boot/dts/imx7-colibri.dtsi
+++ b/arch/arm/boot/dts/imx7-colibri.dtsi
@@ -585,12 +585,19 @@ &usbotg1 {
extcon = <0>, <&extcon_usbc_det>;
};
+/* Colibri MMC/SD */
&usdhc1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_cd_usdhc1>;
cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
disable-wp;
+ no-1-8-v;
+ pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+ pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_cd_usdhc1>;
+ pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_cd_usdhc1>;
+ pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_cd_usdhc1>;
+ pinctrl-3 = <&pinctrl_usdhc1_sleep &pinctrl_cd_usdhc1_sleep>;
+ vmmc-supply = <®_3v3>;
vqmmc-supply = <®_LDO2>;
+ wakeup-source;
};
&usdhc3 {
@@ -949,36 +956,48 @@ MX7D_PAD_UART3_CTS_B__GPIO4_IO7 0x14 /* SODIMM 129 USBH PEN */
>;
};
- pinctrl_usdhc1: usdhc1-grp {
+ pinctrl_usdhc1: usdhc1grp {
fsl,pins = <
- MX7D_PAD_SD1_CMD__SD1_CMD 0x59
- MX7D_PAD_SD1_CLK__SD1_CLK 0x19
- MX7D_PAD_SD1_DATA0__SD1_DATA0 0x59
- MX7D_PAD_SD1_DATA1__SD1_DATA1 0x59
- MX7D_PAD_SD1_DATA2__SD1_DATA2 0x59
- MX7D_PAD_SD1_DATA3__SD1_DATA3 0x59
+ MX7D_PAD_SD1_CLK__SD1_CLK 0x19 /* SODIMM 47 */
+ MX7D_PAD_SD1_CMD__SD1_CMD 0x59 /* SODIMM 190 */
+ MX7D_PAD_SD1_DATA0__SD1_DATA0 0x59 /* SODIMM 192 */
+ MX7D_PAD_SD1_DATA1__SD1_DATA1 0x59 /* SODIMM 49 */
+ MX7D_PAD_SD1_DATA2__SD1_DATA2 0x59 /* SODIMM 51 */
+ MX7D_PAD_SD1_DATA3__SD1_DATA3 0x59 /* SODIMM 53 */
>;
};
- pinctrl_usdhc1_100mhz: usdhc1grp_100mhz {
+ pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
fsl,pins = <
- MX7D_PAD_SD1_CMD__SD1_CMD 0x5a
- MX7D_PAD_SD1_CLK__SD1_CLK 0x1a
- MX7D_PAD_SD1_DATA0__SD1_DATA0 0x5a
- MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5a
- MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5a
- MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5a
+ MX7D_PAD_SD1_CLK__SD1_CLK 0x1a
+ MX7D_PAD_SD1_CMD__SD1_CMD 0x5a
+ MX7D_PAD_SD1_DATA0__SD1_DATA0 0x5a
+ MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5a
+ MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5a
+ MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5a
>;
};
- pinctrl_usdhc1_200mhz: usdhc1grp_200mhz {
+ pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
fsl,pins = <
- MX7D_PAD_SD1_CMD__SD1_CMD 0x5b
- MX7D_PAD_SD1_CLK__SD1_CLK 0x1b
- MX7D_PAD_SD1_DATA0__SD1_DATA0 0x5b
- MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5b
- MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5b
- MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5b
+ MX7D_PAD_SD1_CLK__SD1_CLK 0x1b
+ MX7D_PAD_SD1_CMD__SD1_CMD 0x5b
+ MX7D_PAD_SD1_DATA0__SD1_DATA0 0x5b
+ MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5b
+ MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5b
+ MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5b
+ >;
+ };
+
+ /* Avoid backfeeding with removed card power. */
+ pinctrl_usdhc1_sleep: usdhc1-slpgrp {
+ fsl,pins = <
+ MX7D_PAD_SD1_CMD__SD1_CMD 0x10
+ MX7D_PAD_SD1_CLK__SD1_CLK 0x10
+ MX7D_PAD_SD1_DATA0__SD1_DATA0 0x10
+ MX7D_PAD_SD1_DATA1__SD1_DATA1 0x10
+ MX7D_PAD_SD1_DATA2__SD1_DATA2 0x10
+ MX7D_PAD_SD1_DATA3__SD1_DATA3 0x10
>;
};
@@ -1077,9 +1096,15 @@ MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5 0x4000007f
>;
};
- pinctrl_cd_usdhc1: usdhc1-cd-grp {
+ pinctrl_cd_usdhc1: cdusdhc1grp {
+ fsl,pins = <
+ MX7D_PAD_LPSR_GPIO1_IO00__GPIO1_IO0 0x59 /* SODIMM 43 / MMC_CD */
+ >;
+ };
+
+ pinctrl_cd_usdhc1_sleep: cdusdhc1-slpgrp {
fsl,pins = <
- MX7D_PAD_LPSR_GPIO1_IO00__GPIO1_IO0 0x59 /* CD */
+ MX7D_PAD_LPSR_GPIO1_IO00__GPIO1_IO0 0x0
>;
};
--
2.35.1