From: Marcel Ziswiler <[email protected]>
Move I2C RTC to module-level to be enabled on carrier board-level.
Signed-off-by: Marcel Ziswiler <[email protected]>
---
(no changes since v1)
arch/arm/boot/dts/imx7-colibri-aster.dtsi | 11 +++++------
arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi | 11 +++++------
arch/arm/boot/dts/imx7-colibri.dtsi | 7 +++++++
3 files changed, 17 insertions(+), 12 deletions(-)
diff --git a/arch/arm/boot/dts/imx7-colibri-aster.dtsi b/arch/arm/boot/dts/imx7-colibri-aster.dtsi
index f3a5cb7d6a0c..9796bfabe241 100644
--- a/arch/arm/boot/dts/imx7-colibri-aster.dtsi
+++ b/arch/arm/boot/dts/imx7-colibri-aster.dtsi
@@ -21,12 +21,6 @@ &fec1 {
&i2c4 {
status = "okay";
-
- /* M41T0M6 real time clock on carrier board */
- rtc: rtc@68 {
- compatible = "st,m41t0";
- reg = <0x68>;
- };
};
&pwm1 {
@@ -45,6 +39,11 @@ &pwm4 {
status = "okay";
};
+/* M41T0M6 real time clock */
+&rtc {
+ status = "okay";
+};
+
&uart1 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
index 618831e89ce8..e3aac56aece8 100644
--- a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
+++ b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
@@ -56,12 +56,6 @@ &fec1 {
&i2c4 {
status = "okay";
-
- /* M41T0M6 real time clock on carrier board */
- rtc: rtc@68 {
- compatible = "st,m41t0";
- reg = <0x68>;
- };
};
&pwm1 {
@@ -80,6 +74,11 @@ &pwm4 {
status = "okay";
};
+/* M41T0M6 real time clock */
+&rtc {
+ status = "okay";
+};
+
&uart1 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi
index 3da9ddc06aae..da3df00c7d67 100644
--- a/arch/arm/boot/dts/imx7-colibri.dtsi
+++ b/arch/arm/boot/dts/imx7-colibri.dtsi
@@ -507,6 +507,13 @@ atmel_mxt_ts: touchscreen@4a {
reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; /* SODIMM 106 / RST */
status = "disabled";
};
+
+ /* M41T0M6 real time clock on carrier board */
+ rtc: rtc@68 {
+ compatible = "st,m41t0";
+ reg = <0x68>;
+ status = "disabled";
+ };
};
&lcdif {
--
2.35.1