2022-05-16 20:23:40

by Marcel Ziswiler

Subject: [PATCH v2 19/24] ARM: dts: imx7-colibri: clean-up device enabling/disabling

From: Marcel Ziswiler <[email protected]>

Disable most nodes on module-level to be enabled on carrier board-level.

Signed-off-by: Marcel Ziswiler <[email protected]>
---

(no changes since v1)

arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi | 1 -
arch/arm/boot/dts/imx7-colibri.dtsi | 5 -----
2 files changed, 6 deletions(-)

diff --git a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
index fea6e4c0d4d6..826f13da5b81 100644
--- a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
+++ b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
@@ -44,7 +44,6 @@ mcp2515: can@0 {
spi-max-frequency = <10000000>;
vdd-supply = <&reg_3v3>;
xceiver-supply = <&reg_5v0>;
- status = "okay";
};
};

diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi
index f29096fca54d..065d8f55f326 100644
--- a/arch/arm/boot/dts/imx7-colibri.dtsi
+++ b/arch/arm/boot/dts/imx7-colibri.dtsi
@@ -140,9 +140,6 @@ &adc1 {
};

/* ADC2 is not available as it conflicts with AD7879 resistive touchscreen. */
-&adc2 {
- status = "disabled";
-};

&cpu0 {
cpu-supply = <&reg_DCDC2>;
@@ -191,13 +188,11 @@ ethphy0: ethernet-phy@0 {
&flexcan1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexcan1>;
- status = "disabled";
};

&flexcan2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexcan2>;
- status = "disabled";
};

&gpio1 {
--
2.35.1