The watchdog timer is always usable, regardless of board design, so
there is no point in marking the watchdog device as disabled-by-default
in nuvoton-wpcm450.dtsi.
Signed-off-by: Jonathan Neuschäfer <[email protected]>
Reviewed-by: Joel Stanley <[email protected]>
---
v2:
- add Reviewed-by tag
v1:
- https://lore.kernel.org/lkml/[email protected]/
---
arch/arm/boot/dts/nuvoton-wpcm450-supermicro-x9sci-ln4f.dts | 4 ----
arch/arm/boot/dts/nuvoton-wpcm450.dtsi | 1 -
2 files changed, 5 deletions(-)
diff --git a/arch/arm/boot/dts/nuvoton-wpcm450-supermicro-x9sci-ln4f.dts b/arch/arm/boot/dts/nuvoton-wpcm450-supermicro-x9sci-ln4f.dts
index 3ee61251a16d0..1ae7ae4804275 100644
--- a/arch/arm/boot/dts/nuvoton-wpcm450-supermicro-x9sci-ln4f.dts
+++ b/arch/arm/boot/dts/nuvoton-wpcm450-supermicro-x9sci-ln4f.dts
@@ -77,7 +77,3 @@ &serial1 {
/* "Serial over LAN" port. Connected to ttyS2 of the host system. */
status = "okay";
};
-
-&watchdog0 {
- status = "okay";
-};
diff --git a/arch/arm/boot/dts/nuvoton-wpcm450.dtsi b/arch/arm/boot/dts/nuvoton-wpcm450.dtsi
index 57943bf5aa4a9..1c63ab14c4383 100644
--- a/arch/arm/boot/dts/nuvoton-wpcm450.dtsi
+++ b/arch/arm/boot/dts/nuvoton-wpcm450.dtsi
@@ -83,7 +83,6 @@ watchdog0: watchdog@b800101c {
interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xb800101c 0x4>;
clocks = <&clk24m>;
- status = "disabled";
};
aic: interrupt-controller@b8002000 {
--
2.35.1