Node names are supposed to start with key-
Signed-off-by: Andreas Kemnade <[email protected]>
---
arch/arm/boot/dts/e60k02.dtsi | 4 ++--
arch/arm/boot/dts/e70k02.dtsi | 8 ++++----
arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts | 8 ++++----
3 files changed, 10 insertions(+), 10 deletions(-)
diff --git a/arch/arm/boot/dts/e60k02.dtsi b/arch/arm/boot/dts/e60k02.dtsi
index 1a49f15f2df2..935e2359f8df 100644
--- a/arch/arm/boot/dts/e60k02.dtsi
+++ b/arch/arm/boot/dts/e60k02.dtsi
@@ -22,14 +22,14 @@ chosen {
gpio_keys: gpio-keys {
compatible = "gpio-keys";
- power {
+ key-power {
label = "Power";
gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
wakeup-source;
};
- cover {
+ key-cover {
label = "Cover";
gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
linux,code = <SW_LID>;
diff --git a/arch/arm/boot/dts/e70k02.dtsi b/arch/arm/boot/dts/e70k02.dtsi
index 156de653f2cd..27ef9a62b23c 100644
--- a/arch/arm/boot/dts/e70k02.dtsi
+++ b/arch/arm/boot/dts/e70k02.dtsi
@@ -26,14 +26,14 @@ chosen {
gpio_keys: gpio-keys {
compatible = "gpio-keys";
- power {
+ key-power {
label = "Power";
gpios = <&gpio4 25 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
wakeup-source;
};
- cover {
+ key-cover {
label = "Cover";
gpios = <&gpio4 23 GPIO_ACTIVE_LOW>;
linux,code = <SW_LID>;
@@ -41,13 +41,13 @@ cover {
wakeup-source;
};
- pageup {
+ key-pageup {
label = "PageUp";
gpios = <&gpio4 0 GPIO_ACTIVE_LOW>;
linux,code = <KEY_PAGEUP>;
};
- pagedown {
+ key-pagedown {
label = "PageDown";
gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
linux,code = <KEY_PAGEDOWN>;
diff --git a/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts b/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts
index a17b8bbbdb95..86ad93cbe60c 100644
--- a/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts
+++ b/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts
@@ -27,7 +27,7 @@ gpio_keys: gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_keys>;
- cover {
+ key-cover {
label = "Cover";
gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
linux,code = <SW_LID>;
@@ -35,19 +35,19 @@ cover {
wakeup-source;
};
- fl {
+ key-fl {
label = "Frontlight";
gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
linux,code = <KEY_BRIGHTNESS_CYCLE>;
};
- home {
+ key-home {
label = "Home";
gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
linux,code = <KEY_HOME>;
};
- power {
+ key-power {
label = "Power";
gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
--
2.30.2
On Sat, Jun 04, 2022 at 05:57:48PM +0200, Andreas Kemnade wrote:
> Node names are supposed to start with key-
>
> Signed-off-by: Andreas Kemnade <[email protected]>
Applied, thanks!