2022-06-22 11:42:23

by Mikko Perttunen

[permalink] [raw]
Subject: [PATCH v2 10/13] gpu: host1x: Rewrite job opcode sequence

From: Mikko Perttunen <[email protected]>

For new (Tegra186+) SoCs, use a new ('full-featured') job opcode
sequence that is compatible with virtualization. In particular,
the Host1x hardware in Tegra234 is more strict regarding the sequence,
requiring ACQUIRE_MLOCK-SETCLASS-SETSTREAMID opcodes to occur in
that sequence without gaps (except for SETPAYLOAD), so let's do it
properly in one go now.

Signed-off-by: Mikko Perttunen <[email protected]>
---
drivers/gpu/host1x/hw/channel_hw.c | 144 +++++++++++++++++------------
1 file changed, 85 insertions(+), 59 deletions(-)

diff --git a/drivers/gpu/host1x/hw/channel_hw.c b/drivers/gpu/host1x/hw/channel_hw.c
index f84caf06621a..4eb7fb2e4f0a 100644
--- a/drivers/gpu/host1x/hw/channel_hw.c
+++ b/drivers/gpu/host1x/hw/channel_hw.c
@@ -47,10 +47,41 @@ static void trace_write_gather(struct host1x_cdma *cdma, struct host1x_bo *bo,
}
}

-static void submit_wait(struct host1x_cdma *cdma, u32 id, u32 threshold,
+static void submit_wait(struct host1x_job *job, u32 id, u32 threshold,
u32 next_class)
{
-#if HOST1X_HW >= 2
+ struct host1x_cdma *cdma = &job->channel->cdma;
+
+#if HOST1X_HW >= 6
+ u32 stream_id;
+
+ /*
+ * If a memory context has been set, use it. Otherwise
+ * (if context isolation is disabled) use the engine's
+ * firmware stream ID.
+ */
+ if (job->memory_context)
+ stream_id = job->memory_context->stream_id;
+ else
+ stream_id = job->engine_fallback_streamid;
+
+ host1x_cdma_push_wide(cdma,
+ host1x_opcode_setclass(
+ HOST1X_CLASS_HOST1X,
+ HOST1X_UCLASS_LOAD_SYNCPT_PAYLOAD_32,
+ /* WAIT_SYNCPT_32 is at SYNCPT_PAYLOAD_32+2 */
+ BIT(0) | BIT(2)
+ ),
+ threshold,
+ id,
+ HOST1X_OPCODE_NOP
+ );
+ host1x_cdma_push_wide(&job->channel->cdma,
+ host1x_opcode_setclass(job->class, 0, 0),
+ host1x_opcode_setpayload(stream_id),
+ host1x_opcode_setstreamid(job->engine_streamid_offset / 4),
+ HOST1X_OPCODE_NOP);
+#elif HOST1X_HW >= 2
host1x_cdma_push_wide(cdma,
host1x_opcode_setclass(
HOST1X_CLASS_HOST1X,
@@ -97,7 +128,7 @@ static void submit_gathers(struct host1x_job *job, u32 job_syncpt_base)
else
threshold = cmd->wait.threshold;

- submit_wait(cdma, cmd->wait.id, threshold, cmd->wait.next_class);
+ submit_wait(job, cmd->wait.id, threshold, cmd->wait.next_class);
} else {
struct host1x_job_gather *g = &cmd->gather;

@@ -180,42 +211,70 @@ static void host1x_enable_gather_filter(struct host1x_channel *ch)
#endif
}

-static void host1x_channel_program_engine_streamid(struct host1x_job *job)
+static void channel_program_cdma(struct host1x_job *job)
{
+ struct host1x_cdma *cdma = &job->channel->cdma;
+ struct host1x_syncpt *sp = job->syncpt;
+
#if HOST1X_HW >= 6
u32 fence;

- if (!job->memory_context)
- return;
+ /* Enter engine class with invalid stream ID. */
+ host1x_cdma_push_wide(cdma,
+ host1x_opcode_acquire_mlock(job->class),
+ host1x_opcode_setclass(job->class, 0, 0),
+ host1x_opcode_setpayload(0),
+ host1x_opcode_setstreamid(job->engine_streamid_offset / 4));

- fence = host1x_syncpt_incr_max(job->syncpt, 1);
+ /* Before switching stream ID to real stream ID, ensure engine is idle. */
+ fence = host1x_syncpt_incr_max(sp, 1);
+ host1x_cdma_push(&job->channel->cdma,
+ host1x_opcode_nonincr(HOST1X_UCLASS_INCR_SYNCPT, 1),
+ HOST1X_UCLASS_INCR_SYNCPT_INDX_F(job->syncpt->id) |
+ HOST1X_UCLASS_INCR_SYNCPT_COND_F(4));
+ submit_wait(job, job->syncpt->id, fence, job->class);

- /* First, increment a syncpoint on OP_DONE condition.. */
+ /* Submit work. */
+ job->syncpt_end = host1x_syncpt_incr_max(sp, job->syncpt_incrs);
+ submit_gathers(job, job->syncpt_end - job->syncpt_incrs);

+ /* Before releasing MLOCK, ensure engine is idle again. */
+ fence = host1x_syncpt_incr_max(sp, 1);
host1x_cdma_push(&job->channel->cdma,
host1x_opcode_nonincr(HOST1X_UCLASS_INCR_SYNCPT, 1),
HOST1X_UCLASS_INCR_SYNCPT_INDX_F(job->syncpt->id) |
- HOST1X_UCLASS_INCR_SYNCPT_COND_F(1));
+ HOST1X_UCLASS_INCR_SYNCPT_COND_F(4));
+ submit_wait(job, job->syncpt->id, fence, job->class);

- /* Wait for syncpoint to increment */
+ /* Release MLOCK. */
+ host1x_cdma_push(cdma,
+ HOST1X_OPCODE_NOP, host1x_opcode_release_mlock(job->class));
+#else
+ if (job->serialize) {
+ /*
+ * Force serialization by inserting a host wait for the
+ * previous job to finish before this one can commence.
+ */
+ host1x_cdma_push(cdma,
+ host1x_opcode_setclass(HOST1X_CLASS_HOST1X,
+ host1x_uclass_wait_syncpt_r(), 1),
+ host1x_class_host_wait_syncpt(job->syncpt->id,
+ host1x_syncpt_read_max(sp)));
+ }

- host1x_cdma_push(&job->channel->cdma,
- host1x_opcode_setclass(HOST1X_CLASS_HOST1X,
- host1x_uclass_wait_syncpt_r(), 1),
- host1x_class_host_wait_syncpt(job->syncpt->id, fence));
+ /* Synchronize base register to allow using it for relative waiting */
+ if (sp->base)
+ synchronize_syncpt_base(job);

- /*
- * Now that we know the engine is idle, return to class and
- * change stream ID.
- */
+ /* add a setclass for modules that require it */
+ if (job->class)
+ host1x_cdma_push(cdma,
+ host1x_opcode_setclass(job->class, 0, 0),
+ HOST1X_OPCODE_NOP);

- host1x_cdma_push(&job->channel->cdma,
- host1x_opcode_setclass(job->class, 0, 0),
- HOST1X_OPCODE_NOP);
+ job->syncpt_end = host1x_syncpt_incr_max(sp, job->syncpt_incrs);

- host1x_cdma_push(&job->channel->cdma,
- host1x_opcode_setpayload(job->memory_context->stream_id),
- host1x_opcode_setstreamid(job->engine_streamid_offset / 4));
+ submit_gathers(job, job->syncpt_end - job->syncpt_incrs);
#endif
}

@@ -223,7 +282,6 @@ static int channel_submit(struct host1x_job *job)
{
struct host1x_channel *ch = job->channel;
struct host1x_syncpt *sp = job->syncpt;
- u32 user_syncpt_incrs = job->syncpt_incrs;
u32 prev_max = 0;
u32 syncval;
int err;
@@ -251,6 +309,7 @@ static int channel_submit(struct host1x_job *job)

host1x_channel_set_streamid(ch);
host1x_enable_gather_filter(ch);
+ host1x_hw_syncpt_assign_to_channel(host, sp, ch);

/* begin a CDMA submit */
err = host1x_cdma_begin(&ch->cdma, job);
@@ -259,40 +318,7 @@ static int channel_submit(struct host1x_job *job)
goto error;
}

- if (job->serialize) {
- /*
- * Force serialization by inserting a host wait for the
- * previous job to finish before this one can commence.
- */
- host1x_cdma_push(&ch->cdma,
- host1x_opcode_setclass(HOST1X_CLASS_HOST1X,
- host1x_uclass_wait_syncpt_r(), 1),
- host1x_class_host_wait_syncpt(job->syncpt->id,
- host1x_syncpt_read_max(sp)));
- }
-
- /* Synchronize base register to allow using it for relative waiting */
- if (sp->base)
- synchronize_syncpt_base(job);
-
- host1x_hw_syncpt_assign_to_channel(host, sp, ch);
-
- /* add a setclass for modules that require it */
- if (job->class)
- host1x_cdma_push(&ch->cdma,
- host1x_opcode_setclass(job->class, 0, 0),
- HOST1X_OPCODE_NOP);
-
- /*
- * Ensure engine DMA is idle and set new stream ID. May increment
- * syncpt max.
- */
- host1x_channel_program_engine_streamid(job);
-
- syncval = host1x_syncpt_incr_max(sp, user_syncpt_incrs);
- job->syncpt_end = syncval;
-
- submit_gathers(job, syncval - user_syncpt_incrs);
+ channel_program_cdma(job);

/* end CDMA submit & stash pinned hMems into sync queue */
host1x_cdma_end(&ch->cdma, job);
--
2.36.1