The R_PIO pinctrl device on the Allwinner H616 SoC does not have an
interrupt (it features only two pins).
However the binding requires at least naming one upstream interrupt,
plus the #interrupt-cells and interrupt-controller properties.
Drop the unconditional requirement for the interrupt properties, and
make them dependent on being not this particular pinctrl device.
Signed-off-by: Andre Przywara <[email protected]>
---
.../pinctrl/allwinner,sun4i-a10-pinctrl.yaml | 15 ++++++++++++---
1 file changed, 12 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml
index bfce850c20351..0bd903954195b 100644
--- a/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml
@@ -133,14 +133,11 @@ patternProperties:
required:
- "#gpio-cells"
- - "#interrupt-cells"
- compatible
- reg
- - interrupts
- clocks
- clock-names
- gpio-controller
- - interrupt-controller
allOf:
# FIXME: We should have the pin bank supplies here, but not a lot of
@@ -148,6 +145,18 @@ allOf:
# warnings.
- $ref: "pinctrl.yaml#"
+ - if:
+ not:
+ properties:
+ compatible:
+ enum:
+ - allwinner,sun50i-h616-r-pinctrl
+ then:
+ required:
+ - "#interrupt-cells"
+ - interrupts
+ - interrupt-controller
+
- if:
properties:
compatible:
--
2.25.1
On Fri, 01 Jul 2022 12:24:48 +0100, Andre Przywara wrote:
> The R_PIO pinctrl device on the Allwinner H616 SoC does not have an
> interrupt (it features only two pins).
> However the binding requires at least naming one upstream interrupt,
> plus the #interrupt-cells and interrupt-controller properties.
>
> Drop the unconditional requirement for the interrupt properties, and
> make them dependent on being not this particular pinctrl device.
>
> Signed-off-by: Andre Przywara <[email protected]>
> ---
> .../pinctrl/allwinner,sun4i-a10-pinctrl.yaml | 15 ++++++++++++---
> 1 file changed, 12 insertions(+), 3 deletions(-)
>
Reviewed-by: Rob Herring <[email protected]>
On 7/1/22 6:24 AM, Andre Przywara wrote:
> The R_PIO pinctrl device on the Allwinner H616 SoC does not have an
> interrupt (it features only two pins).
> However the binding requires at least naming one upstream interrupt,
> plus the #interrupt-cells and interrupt-controller properties.
>
> Drop the unconditional requirement for the interrupt properties, and
> make them dependent on being not this particular pinctrl device.
>
> Signed-off-by: Andre Przywara <[email protected]>
Acked-by: Samuel Holland <[email protected]>
> ---
> .../pinctrl/allwinner,sun4i-a10-pinctrl.yaml | 15 ++++++++++++---
> 1 file changed, 12 insertions(+), 3 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml
> index bfce850c20351..0bd903954195b 100644
> --- a/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml
> @@ -133,14 +133,11 @@ patternProperties:
>
> required:
> - "#gpio-cells"
> - - "#interrupt-cells"
> - compatible
> - reg
> - - interrupts
> - clocks
> - clock-names
> - gpio-controller
> - - interrupt-controller
>
> allOf:
> # FIXME: We should have the pin bank supplies here, but not a lot of
> @@ -148,6 +145,18 @@ allOf:
> # warnings.
>
> - $ref: "pinctrl.yaml#"
> + - if:
> + not:
> + properties:
> + compatible:
> + enum:
> + - allwinner,sun50i-h616-r-pinctrl
> + then:
Nit: all of the existing ifs and thens have blank lines between them.
> + required:
> + - "#interrupt-cells"
> + - interrupts
> + - interrupt-controller
> +
> - if:
> properties:
> compatible:
>