Add support for LEDs wired up to light when the PWM output is low, just
like the regular PWM LEDs.
Signed-off-by: Emil Renner Berthing <[email protected]>
---
drivers/leds/rgb/leds-pwm-multicolor.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/leds/rgb/leds-pwm-multicolor.c b/drivers/leds/rgb/leds-pwm-multicolor.c
index eb67b89d28e9..da9d2218ae18 100644
--- a/drivers/leds/rgb/leds-pwm-multicolor.c
+++ b/drivers/leds/rgb/leds-pwm-multicolor.c
@@ -19,6 +19,7 @@
struct pwm_led {
struct pwm_device *pwm;
struct pwm_state state;
+ bool active_low;
};
struct pwm_mc_led {
@@ -45,6 +46,9 @@ static int led_pwm_mc_set(struct led_classdev *cdev,
duty *= mc_cdev->subled_info[i].brightness;
do_div(duty, cdev->max_brightness);
+ if (priv->leds[i].active_low)
+ duty = priv->leds[i].state.period - duty;
+
priv->leds[i].state.duty_cycle = duty;
priv->leds[i].state.enabled = duty > 0;
ret = pwm_apply_state(priv->leds[i].pwm,
@@ -76,6 +80,7 @@ static int iterate_subleds(struct device *dev, struct pwm_mc_led *priv,
goto release_fwnode;
}
pwm_init_state(pwmled->pwm, &pwmled->state);
+ pwmled->active_low = fwnode_property_read_bool(fwnode, "active-low");
ret = fwnode_property_read_u32(fwnode, "color", &color);
if (ret) {
--
2.37.0
On Tue, Jul 5, 2022 at 11:01 PM Emil Renner Berthing
<[email protected]> wrote:
> Add support for LEDs wired up to light when the PWM output is low, just
> like the regular PWM LEDs.
>
> Signed-off-by: Emil Renner Berthing <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds