From: Marcel Ziswiler <[email protected]>
Fix reset GPIO polarity in-line with the following commit feedaacdadfc
("Input: atmel_mxt_ts - fix up inverted RESET handler").
Fixes: a39ed23bdf6e ("arm64: dts: freescale: add initial support for verdin imx8m plus")
Signed-off-by: Marcel Ziswiler <[email protected]>
---
arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
index c5987bdbb383..1c74c6a19449 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
@@ -628,7 +628,7 @@ atmel_mxt_ts_mezzanine: touch-mezzanine@4a {
interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
reg = <0x4a>;
/* Verdin GPIO_2 (SODIMM 208) */
- reset-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
status = "disabled";
};
};
@@ -705,7 +705,7 @@ atmel_mxt_ts: touch@4a {
pinctrl-0 = <&pinctrl_gpio_9_dsi>, <&pinctrl_i2s_2_bclk_touch_reset>;
reg = <0x4a>;
/* Verdin I2S_2_BCLK (TOUCH_RESET#, SODIMM 42) */
- reset-gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
status = "disabled";
};
--
2.36.1