The "fabric clocks" in current PolarFire SoC device trees are not
really fixed clocks. Their frequency is set by the bitstream, so having
them located in -fabric.dtsi is not a problem - they're just as "fixed"
as the IP blocks etc used in the FPGA fabric.
However, their configuration can be read at runtime (and to an extent
they can be controlled, although the intended usage is static
configurations set by the bitstream) through the system controller bus.
In the v2209 reference design a single CCC (north-west corner) is
enabled, using a 50 MHz off-chip oscillator as its reference.
Updating to the v2209 reference design is required.
Signed-off-by: Conor Dooley <[email protected]>
---
.../dts/microchip/mpfs-icicle-kit-fabric.dtsi | 27 +++++++++------
.../boot/dts/microchip/mpfs-icicle-kit.dts | 4 +++
.../dts/microchip/mpfs-polarberry-fabric.dtsi | 5 +++
arch/riscv/boot/dts/microchip/mpfs.dtsi | 34 +++++++++++++++++--
4 files changed, 58 insertions(+), 12 deletions(-)
diff --git a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi
index 0d28858b83f2..f17cb00df467 100644
--- a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi
+++ b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi
@@ -2,14 +2,14 @@
/* Copyright (c) 2020-2021 Microchip Technology Inc */
/ {
- compatible = "microchip,mpfs-icicle-reference-rtlv2203", "microchip,mpfs";
+ compatible = "microchip,mpfs-icicle-reference-rtlv2209", "microchip,mpfs";
core_pwm0: pwm@41000000 {
compatible = "microchip,corepwm-rtl-v4";
reg = <0x0 0x41000000 0x0 0xF0>;
microchip,sync-update-mask = /bits/ 32 <0>;
#pwm-cells = <2>;
- clocks = <&fabric_clk3>;
+ clocks = <&ccc_nw CLK_CCC_PLL0_OUT0>;
status = "disabled";
};
@@ -18,22 +18,29 @@ i2c2: i2c@44000000 {
reg = <0x0 0x44000000 0x0 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&fabric_clk3>;
+ clocks = <&ccc_nw CLK_CCC_PLL0_OUT3>;
interrupt-parent = <&plic>;
interrupts = <122>;
clock-frequency = <100000>;
status = "disabled";
};
- fabric_clk3: fabric-clk3 {
+ refclk_ccc: cccrefclk {
compatible = "fixed-clock";
#clock-cells = <0>;
- clock-frequency = <62500000>;
};
+};
- fabric_clk1: fabric-clk1 {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <125000000>;
- };
+&ccc_nw {
+ clocks = <&refclk_ccc>, <&refclk_ccc>, <&refclk_ccc>, <&refclk_ccc>,
+ <&refclk_ccc>, <&refclk_ccc>;
+ clock-names = "pll0_ref0", "pll0_ref1", "pll1_ref0", "pll1_ref1",
+ "dll0_ref", "dll1_ref";
+ status = "okay";
+};
+
+&pcie {
+ clocks = <&ccc_nw CLK_CCC_PLL0_OUT0>, <&ccc_nw CLK_CCC_PLL0_OUT1>,
+ <&ccc_nw CLK_CCC_PLL0_OUT3>;
+ clock-names = "fic0", "fic1", "fic3";
};
diff --git a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts
index 044982a11df5..d361d1e38b16 100644
--- a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts
+++ b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts
@@ -140,6 +140,10 @@ &refclk {
clock-frequency = <125000000>;
};
+&refclk_ccc {
+ clock-frequency = <50000000>;
+};
+
&rtc {
status = "okay";
};
diff --git a/arch/riscv/boot/dts/microchip/mpfs-polarberry-fabric.dtsi b/arch/riscv/boot/dts/microchip/mpfs-polarberry-fabric.dtsi
index 49380c428ec9..3beb450b4259 100644
--- a/arch/riscv/boot/dts/microchip/mpfs-polarberry-fabric.dtsi
+++ b/arch/riscv/boot/dts/microchip/mpfs-polarberry-fabric.dtsi
@@ -14,3 +14,8 @@ fabric_clk1: fabric-clk1 {
clock-frequency = <125000000>;
};
};
+
+&pcie {
+ clocks = <&fabric_clk1>, <&fabric_clk1>, <&fabric_clk3>;
+ clock-names = "fic0", "fic1", "fic3";
+};
diff --git a/arch/riscv/boot/dts/microchip/mpfs.dtsi b/arch/riscv/boot/dts/microchip/mpfs.dtsi
index 499c2e63ad35..b23390e7504e 100644
--- a/arch/riscv/boot/dts/microchip/mpfs.dtsi
+++ b/arch/riscv/boot/dts/microchip/mpfs.dtsi
@@ -236,6 +236,38 @@ clkcfg: clkcfg@20002000 {
#clock-cells = <1>;
};
+ ccc_se: clock-controller@38010000 {
+ compatible = "microchip,mpfs-ccc";
+ reg = <0x0 0x38010000 0x0 0x1000>, <0x0 0x38020000 0x0 0x1000>,
+ <0x0 0x39010000 0x0 0x1000>, <0x0 0x39020000 0x0 0x1000>;
+ #clock-cells = <1>;
+ status = "disabled";
+ };
+
+ ccc_ne: clock-controller@38040000 {
+ compatible = "microchip,mpfs-ccc";
+ reg = <0x0 0x38040000 0x0 0x1000>, <0x0 0x38080000 0x0 0x1000>,
+ <0x0 0x39040000 0x0 0x1000>, <0x0 0x39080000 0x0 0x1000>;
+ #clock-cells = <1>;
+ status = "disabled";
+ };
+
+ ccc_nw: clock-controller@38100000 {
+ compatible = "microchip,mpfs-ccc";
+ reg = <0x0 0x38100000 0x0 0x1000>, <0x0 0x38200000 0x0 0x1000>,
+ <0x0 0x39100000 0x0 0x1000>, <0x0 0x39200000 0x0 0x1000>;
+ #clock-cells = <1>;
+ status = "disabled";
+ };
+
+ ccc_sw: clock-controller@38400000 {
+ compatible = "microchip,mpfs-ccc";
+ reg = <0x0 0x38400000 0x0 0x1000>, <0x0 0x38800000 0x0 0x1000>,
+ <0x0 0x39400000 0x0 0x1000>, <0x0 0x39800000 0x0 0x1000>;
+ #clock-cells = <1>;
+ status = "disabled";
+ };
+
mmuart0: serial@20000000 {
compatible = "ns16550a";
reg = <0x0 0x20000000 0x0 0x400>;
@@ -480,8 +512,6 @@ pcie: pcie@2000000000 {
<0 0 0 3 &pcie_intc 2>,
<0 0 0 4 &pcie_intc 3>;
interrupt-map-mask = <0 0 0 7>;
- clocks = <&fabric_clk1>, <&fabric_clk1>, <&fabric_clk3>;
- clock-names = "fic0", "fic1", "fic3";
ranges = <0x3000000 0x0 0x8000000 0x20 0x8000000 0x0 0x80000000>;
msi-parent = <&pcie>;
msi-controller;
--
2.36.1