From: Jerome Neanne <[email protected]>
This board uses the pin as a power-button, enable it.
Needed for driver testing but official board support pending.
TI commitment is required before board upstream kick-off.
Signed-off-by: Markus Schneider-Pargmann <[email protected]>
Signed-off-by: Jerome Neanne <[email protected]>
---
arch/arm64/boot/dts/ti/k3-am642-sk.dts | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm64/boot/dts/ti/k3-am642-sk.dts b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
index 1f7ce60ecb57..238798ea6a79 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
@@ -362,6 +362,7 @@ tps65219: pmic@30 {
pinctrl-0 = <&pmic_irq_pins_default>;
interrupt-parent = <&gic500>;
interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+ ti,power-button;
buck1-supply = <&vcc_3v3_sys>;
buck2-supply = <&vcc_3v3_sys>;
--
2.37.2