From: Philippe Schenker <[email protected]>
The Lontium LT8912B driver needs a HDMI connector to be connected to
port 1. Introduce this connector to be enabled in a device tree overlay.
Signed-off-by: Philippe Schenker <[email protected]>
Signed-off-by: Marcel Ziswiler <[email protected]>
---
arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
index ca1c087e7c29..ef105c0745eb 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
@@ -53,6 +53,14 @@ key-wakeup {
};
};
+ hdmi_connector: hdmi-connector {
+ compatible = "hdmi-connector";
+ ddc-i2c-bus = <&i2c2>;
+ label = "hdmi";
+ type = "a";
+ status = "disabled";
+ };
+
panel_lvds: panel-lvds {
compatible = "panel-lvds";
backlight = <&backlight>;
--
2.36.1