From: Radhey Shyam Pandey <[email protected]>
Add an optional DMA property 'xlnx,axistream-connected'. This can be
specified to indicate that DMA is connected to a streaming IP in the
hardware design and dma driver needs to do some additional handling
i.e pass metadata and perform streaming IP specific configuration.
Signed-off-by: Radhey Shyam Pandey <[email protected]>
Acked-by: Rob Herring <[email protected]>
Signed-off-by: Sarath Babu Naidu Gaddam <[email protected]>
---
Changes in V3:
- Add Rob acked-by.
Changes in V2:
- Rename xlnx,axieth-connected to xlnx,axistream-connected to
make it generic.
---
Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt b/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt
index d1700a5c36bf..18445aa092ab 100644
--- a/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt
+++ b/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt
@@ -49,6 +49,8 @@ Optional properties for AXI DMA and MCDMA:
register as configured in h/w. Takes values {8...26}. If the property
is missing or invalid then the default value 23 is used. This is the
maximum value that is supported by all IP versions.
+- xlnx,axistream-connected: Tells whether DMA is connected to AXI stream IP.
+
Optional properties for VDMA:
- xlnx,flush-fsync: Tells which channel to Flush on Frame sync.
It takes following values:
--
2.25.1