The COUNT_VALUE in the PACKET_CNT register is 16-bit so the maximum
value is 65535. Asking the driver to transfer a larger size currently
leads to the DMA transfer timing out. Implement ->max_transfer_size()
and have the core split the transfer as needed.
Fixes: 230d42d422e7 ("spi: Add s3c64xx SPI Controller driver")
Signed-off-by: Vincent Whitchurch <[email protected]>
---
drivers/spi/spi-s3c64xx.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
index 651c35dd9124..71d324ec9a70 100644
--- a/drivers/spi/spi-s3c64xx.c
+++ b/drivers/spi/spi-s3c64xx.c
@@ -84,6 +84,7 @@
#define S3C64XX_SPI_ST_TX_FIFORDY (1<<0)
#define S3C64XX_SPI_PACKET_CNT_EN (1<<16)
+#define S3C64XX_SPI_PACKET_CNT_MASK GENMASK(15, 0)
#define S3C64XX_SPI_PND_TX_UNDERRUN_CLR (1<<4)
#define S3C64XX_SPI_PND_TX_OVERRUN_CLR (1<<3)
@@ -711,6 +712,13 @@ static int s3c64xx_spi_prepare_message(struct spi_master *master,
return 0;
}
+static size_t s3c64xx_spi_max_transfer_size(struct spi_device *spi)
+{
+ struct spi_controller *ctlr = spi->controller;
+
+ return ctlr->can_dma ? S3C64XX_SPI_PACKET_CNT_MASK : SIZE_MAX;
+}
+
static int s3c64xx_spi_transfer_one(struct spi_master *master,
struct spi_device *spi,
struct spi_transfer *xfer)
@@ -1152,6 +1160,7 @@ static int s3c64xx_spi_probe(struct platform_device *pdev)
master->unprepare_transfer_hardware = s3c64xx_spi_unprepare_transfer;
master->prepare_message = s3c64xx_spi_prepare_message;
master->transfer_one = s3c64xx_spi_transfer_one;
+ master->max_transfer_size = s3c64xx_spi_max_transfer_size;
master->num_chipselect = sci->num_cs;
master->use_gpio_descriptors = true;
master->dma_alignment = 8;
--
2.34.1