Add support for the haptics found in pmi8998 and related PMICs.
Based on the ff-memless interface. Currently this driver provides
a partial implementation of hardware features.
This driver only supports LRAs (Linear Resonant Actuators) in the "buffer"
mode with a single wave pattern.
Signed-off-by: Caleb Connolly <[email protected]>
---
drivers/input/misc/Kconfig | 15 +
drivers/input/misc/Makefile | 1 +
drivers/input/misc/qcom-pmi8998-haptics.c | 690 ++++++++++++++++++++++
3 files changed, 706 insertions(+)
create mode 100644 drivers/input/misc/qcom-pmi8998-haptics.c
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index a18ab7358d8f..c3b59ea23144 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -186,6 +186,21 @@ config INPUT_PMIC8XXX_PWRKEY
To compile this driver as a module, choose M here: the
module will be called pmic8xxx-pwrkey.
+config INPUT_QCOM_PMI8998_HAPTICS
+ tristate "Qualcomm SPMI HAPTICS"
+ depends on ARCH_QCOM
+ depends on MFD_PM8XXX || MFD_SPMI_PMIC
+ select INPUT_FF_MEMLESS
+ help
+ This option enables support for the haptics found in pmi8998 and
+ related PMICs. Based on the ff-memless interface.
+
+ This driver is for hardware too new for the INPUT_PM8XXX_VIBRATOR
+ driver.
+
+ To compile this driver as module, choose M here: the
+ module will be called qcom_pmi8998_haptics.
+
config INPUT_SPARCSPKR
tristate "SPARC Speaker support"
depends on PCI && SPARC64
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index 28dfc444f0a9..039d0a97f2f4 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -65,6 +65,7 @@ obj-$(CONFIG_INPUT_PMIC8XXX_PWRKEY) += pmic8xxx-pwrkey.o
obj-$(CONFIG_INPUT_POWERMATE) += powermate.o
obj-$(CONFIG_INPUT_PWM_BEEPER) += pwm-beeper.o
obj-$(CONFIG_INPUT_PWM_VIBRA) += pwm-vibra.o
+obj-$(CONFIG_INPUT_QCOM_PMI8998_HAPTICS)+= qcom-pmi8998-haptics.o
obj-$(CONFIG_INPUT_RAVE_SP_PWRBUTTON) += rave-sp-pwrbutton.o
obj-$(CONFIG_INPUT_RB532_BUTTON) += rb532_button.o
obj-$(CONFIG_INPUT_REGULATOR_HAPTIC) += regulator-haptic.o
diff --git a/drivers/input/misc/qcom-pmi8998-haptics.c b/drivers/input/misc/qcom-pmi8998-haptics.c
new file mode 100644
index 000000000000..e9eec2d9de2d
--- /dev/null
+++ b/drivers/input/misc/qcom-pmi8998-haptics.c
@@ -0,0 +1,690 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2022, Caleb Connolly <[email protected]>
+ * Qualcomm QPMI haptics driver for pmi8998 and related PMICs.
+ */
+
+#include <linux/bits.h>
+#include <linux/bitfield.h>
+#include <linux/errno.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/log2.h>
+#include <linux/minmax.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/time.h>
+#include <linux/types.h>
+
+// clang-format off
+#define HAP_STATUS_1_REG 0x0A
+#define HAP_BUSY_BIT BIT(1)
+#define SC_FLAG_BIT BIT(3)
+#define AUTO_RES_ERROR_BIT BIT(4)
+
+#define HAP_LRA_AUTO_RES_LO_REG 0x0B
+#define HAP_LRA_AUTO_RES_HI_REG 0x0C
+
+#define HAP_EN_CTL_REG 0x46
+#define HAP_EN_BIT BIT(7)
+
+#define HAP_EN_CTL2_REG 0x48
+#define BRAKE_EN_BIT BIT(0)
+
+#define HAP_AUTO_RES_CTRL_REG 0x4B
+#define AUTO_RES_EN_BIT BIT(7)
+#define AUTO_RES_ERR_RECOVERY_BIT BIT(3)
+#define AUTO_RES_EN_FLAG_BIT BIT(0)
+
+#define HAP_CFG1_REG 0x4C
+#define HAP_ACT_TYPE_MASK BIT(0)
+
+#define HAP_CFG2_REG 0x4D
+#define HAP_LRA_RES_TYPE_MASK BIT(0)
+
+#define HAP_SEL_REG 0x4E
+#define HAP_WF_SOURCE_MASK GENMASK(5, 4)
+#define HAP_WF_SOURCE_SHIFT 4
+
+#define HAP_LRA_AUTO_RES_REG 0x4F
+#define LRA_AUTO_RES_MODE_MASK GENMASK(6, 4)
+#define LRA_AUTO_RES_MODE_SHIFT 4
+#define LRA_HIGH_Z_MASK GENMASK(3, 2)
+#define LRA_HIGH_Z_SHIFT 2
+#define LRA_RES_CAL_MASK GENMASK(1, 0)
+#define HAP_RES_CAL_PERIOD_MIN 4
+#define HAP_RES_CAL_PERIOD_MAX 32
+
+#define HAP_VMAX_CFG_REG 0x51
+#define HAP_VMAX_OVD_BIT BIT(6)
+#define HAP_VMAX_MASK GENMASK(5, 1)
+#define HAP_VMAX_SHIFT 1
+
+#define HAP_ILIM_CFG_REG 0x52
+#define HAP_ILIM_SEL_MASK BIT(0)
+#define HAP_ILIM_400_MA 0
+#define HAP_ILIM_800_MA 1
+
+#define HAP_SC_DEB_REG 0x53
+#define HAP_SC_DEB_MASK GENMASK(2, 0)
+#define HAP_SC_DEB_CYCLES_MIN 0
+#define HAP_DEF_SC_DEB_CYCLES 8
+#define HAP_SC_DEB_CYCLES_MAX 32
+
+#define HAP_RATE_CFG1_REG 0x54
+#define HAP_RATE_CFG1_MASK GENMASK(7, 0)
+#define HAP_RATE_CFG2_SHIFT 8 // As CFG2 is the most significant byte
+
+#define HAP_RATE_CFG2_REG 0x55
+#define HAP_RATE_CFG2_MASK GENMASK(3, 0)
+
+#define HAP_SC_CLR_REG 0x59
+#define SC_CLR_BIT BIT(0)
+
+#define HAP_BRAKE_REG 0x5C
+#define HAP_BRAKE_PAT_MASK 0x3
+
+#define HAP_WF_REPEAT_REG 0x5E
+#define WF_REPEAT_MASK GENMASK(6, 4)
+#define WF_REPEAT_SHIFT 4
+#define WF_REPEAT_MIN 1
+#define WF_REPEAT_MAX 128
+#define WF_S_REPEAT_MASK GENMASK(1, 0)
+#define WF_S_REPEAT_MIN 1
+#define WF_S_REPEAT_MAX 8
+
+#define HAP_WF_S1_REG 0x60
+#define HAP_WF_SIGN_BIT BIT(7)
+#define HAP_WF_OVD_BIT BIT(6)
+#define HAP_WF_SAMP_MAX GENMASK(5, 1)
+#define HAP_WF_SAMPLE_LEN 8
+
+#define HAP_PLAY_REG 0x70
+#define HAP_PLAY_BIT BIT(7)
+#define HAP_PAUSE_BIT BIT(0)
+
+#define HAP_SEC_ACCESS_REG 0xD0
+#define HAP_SEC_ACCESS_UNLOCK 0xA5
+
+#define HAP_TEST2_REG 0xE3
+
+
+#define HAP_VMAX_MIN_MV 116
+#define HAP_VMAX_MAX_MV 3596
+#define HAP_VMAX_MAX_MV_STRONG 3596
+
+#define HAP_WAVE_PLAY_RATE_MIN_US 0
+#define HAP_WAVE_PLAY_RATE_MAX_US 20475
+#define HAP_WAVE_PLAY_TIME_MAX_MS 15000
+
+#define AUTO_RES_ERR_POLL_TIME_NS (20 * NSEC_PER_MSEC)
+#define HAPTICS_BACK_EMF_DELAY_US 20000
+
+#define HAP_BRAKE_PAT_LEN 4
+#define HAP_WAVE_SAMP_LEN 8
+#define NUM_WF_SET 4
+#define HAP_WAVE_SAMP_SET_LEN (HAP_WAVE_SAMP_LEN * NUM_WF_SET)
+#define HAP_RATE_CFG_STEP_US 5
+
+#define SC_MAX_COUNT 5
+#define SC_COUNT_RST_DELAY_US 1000000
+
+// Actuator types
+#define HAP_TYPE_LRA 0
+#define HAP_TYPE_ERM 1
+
+// LRA Wave type
+#define HAP_WAVE_SINE 0
+#define HAP_WAVE_SQUARE 1
+
+// Play modes
+#define HAP_PLAY_DIRECT 0
+#define HAP_PLAY_BUFFER 1
+#define HAP_PLAY_AUDIO 2
+#define HAP_PLAY_PWM 3
+
+#define HAP_PLAY_MAX HAP_PLAY_PWM
+
+// Auto resonance type
+#define HAP_AUTO_RES_NONE 0
+#define HAP_AUTO_RES_ZXD 1
+#define HAP_AUTO_RES_QWD 2
+#define HAP_AUTO_RES_MAX_QWD 3
+#define HAP_AUTO_RES_ZXD_EOP 4
+// clang-format on
+
+static const uint8_t default_brake_pattern[] = {
+ 0x3, 0x3, 0x3, 0x3, 0x3,
+};
+
+static const uint8_t wave_sample_pattern[] = {
+ 0x7e, 0x7e, 0x28, 0x28, 0x28, 0x28, 0x28, 0x28,
+};
+
+/**
+ * struct spmi_haptics - struct for spmi haptics data.
+ *
+ * @dev: Our device parent.
+ * @regmap: Register map for the hardware block.
+ * @input: The input device used to receive events.
+ * @work: Work struct to play effects.
+ * @base: Base address of the regmap.
+ * @play_irq: Fired to load the next wave pattern.
+ * @sc_irq: Short circuit irq.
+ * @last_sc_time: Time since the short circuit IRQ last fired.
+ * @sc_count: Number of times the short circuit IRQ has fired in this interval.
+ * @actuator_type: The type of actuator in use.
+ * @wave_shape: The shape of the waves to use (sine or square).
+ * @play_mode: The play mode to use (direct, buffer, pwm, audio).
+ * @vmax: Max voltage to use when playing.
+ * @current_limit: The current limit for this hardware (400mA or 800mA).
+ * @play_wave_rate: The wave rate to use for this hardware.
+ * @play_lock: Lock to be held when updating the hardware state.
+ */
+struct spmi_haptics {
+ struct device *dev;
+ struct regmap *regmap;
+ struct input_dev *input;
+ struct work_struct work;
+ uint32_t base;
+
+ int play_irq;
+ int sc_irq;
+ ktime_t last_sc_time;
+ uint8_t sc_count;
+
+ uint8_t actuator_type;
+ uint8_t wave_shape;
+ uint8_t play_mode;
+ uint32_t vmax;
+ uint32_t current_limit;
+ uint32_t play_wave_rate;
+ struct mutex play_lock;
+};
+
+static int haptics_write_vmax(struct spmi_haptics *haptics)
+{
+ uint8_t val = 0;
+ uint32_t vmax_mv = haptics->vmax;
+
+ vmax_mv = clamp_t(uint32_t, vmax_mv, HAP_VMAX_MIN_MV, HAP_VMAX_MAX_MV);
+ vmax_mv = DIV_ROUND_CLOSEST(vmax_mv, HAP_VMAX_MIN_MV);
+
+ val = FIELD_PREP(HAP_VMAX_MASK, vmax_mv);
+
+ return regmap_update_bits(haptics->regmap,
+ haptics->base + HAP_VMAX_CFG_REG,
+ HAP_VMAX_MASK | HAP_WF_OVD_BIT, val);
+}
+
+static int haptics_module_enable(struct spmi_haptics *haptics, bool enable)
+{
+ return regmap_update_bits(haptics->regmap,
+ haptics->base + HAP_EN_CTL_REG, HAP_EN_BIT,
+ enable ? HAP_EN_BIT : 0);
+}
+
+static int haptics_play(struct spmi_haptics *haptics, bool play)
+{
+ return regmap_update_bits(haptics->regmap, haptics->base + HAP_PLAY_REG,
+ HAP_PLAY_BIT | HAP_PAUSE_BIT,
+ play ? HAP_PLAY_BIT : 0);
+}
+
+static bool is_haptics_module_enabled(struct spmi_haptics *haptics)
+{
+ uint32_t val;
+
+ regmap_read(haptics->regmap, haptics->base + HAP_EN_CTL_REG, &val);
+ return !!val;
+}
+
+/*
+ * This IRQ is fired to tell us to load the next wave sample set.
+ * As we only currently support a single sample set, it's unused.
+ */
+static irqreturn_t haptics_play_irq(int irq, void *data)
+{
+ struct spmi_haptics *haptics = data;
+
+ dev_dbg(haptics->dev, "play_irq triggered");
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * Fires every ~50ms whilst the haptics are active.
+ * If the SC_FLAG_BIT is set then that means there isn't a short circuit
+ * and we just need to clear the IRQ to indicate that the device should
+ * keep vibrating.
+ *
+ * Otherwise, it means a short circuit situation has occurred.
+ */
+static irqreturn_t haptics_sc_irq(int irq, void *data)
+{
+ struct spmi_haptics *haptics = data;
+ int ret;
+ uint32_t val;
+ long sc_delta_time_us;
+ ktime_t temp;
+
+ mutex_lock(&haptics->play_lock);
+
+ ret = regmap_read(haptics->regmap, haptics->base + HAP_STATUS_1_REG,
+ &val);
+ if (ret)
+ goto out;
+
+ if (!(val & SC_FLAG_BIT)) {
+ haptics->sc_count = 0;
+ goto out;
+ }
+
+ temp = ktime_get();
+ sc_delta_time_us = ktime_us_delta(temp, haptics->last_sc_time);
+ haptics->last_sc_time = temp;
+
+ if (sc_delta_time_us > SC_COUNT_RST_DELAY_US)
+ haptics->sc_count = 0;
+ else
+ haptics->sc_count++;
+
+ ret = regmap_update_bits(haptics->regmap,
+ haptics->base + HAP_SC_CLR_REG, SC_CLR_BIT,
+ SC_CLR_BIT);
+ if (ret)
+ goto out;
+
+ if (haptics->sc_count > SC_MAX_COUNT) {
+ cancel_work_sync(&haptics->work);
+ dev_err(haptics->dev,
+ "Short circuit persists, disabling haptics\n");
+ ret = haptics_module_enable(haptics, false);
+ if (ret)
+ dev_err(haptics->dev, "Error disabling module, rc=%d\n",
+ ret);
+ }
+
+out:
+ mutex_unlock(&haptics->play_lock);
+ return IRQ_HANDLED;
+}
+
+static int haptics_vibrate(struct spmi_haptics *haptics)
+{
+ int ret;
+
+ if (haptics->sc_count > SC_MAX_COUNT) {
+ dev_err(haptics->dev, "Can't play while in short circuit");
+ return -EINVAL;
+ }
+
+ ret = haptics_write_vmax(haptics);
+ if (ret)
+ return ret;
+
+ ret = haptics_module_enable(haptics, true);
+ if (ret) {
+ dev_err(haptics->dev, "Error enabling module, ret=%d\n", ret);
+ return ret;
+ }
+
+ ret = haptics_play(haptics, true);
+ if (ret) {
+ dev_err(haptics->dev, "Error enabling play, ret=%d\n", ret);
+ return ret;
+ }
+
+ return ret;
+}
+
+static int haptics_stop_vibrate(struct spmi_haptics *haptics)
+{
+ int ret;
+
+ ret = haptics_play(haptics, false);
+ if (ret) {
+ dev_err(haptics->dev, "Error disabling play, ret=%d\n", ret);
+ return ret;
+ }
+
+ ret = haptics_module_enable(haptics, false);
+ if (ret) {
+ dev_err(haptics->dev, "Error disabling module, ret=%d\n", ret);
+ return ret;
+ }
+
+ return ret;
+}
+
+static void haptics_play_stop_work(struct work_struct *work)
+{
+ struct spmi_haptics *haptics =
+ container_of(work, struct spmi_haptics, work);
+
+ int ret;
+
+ mutex_lock(&haptics->play_lock);
+
+ if (!is_haptics_module_enabled(haptics) && haptics->vmax)
+ ret = haptics_vibrate(haptics);
+ else
+ ret = haptics_stop_vibrate(haptics);
+ if (ret)
+ dev_err(haptics->dev, "Error setting haptics, ret=%d", ret);
+
+ mutex_unlock(&haptics->play_lock);
+}
+
+static int spmi_haptics_play_effect(struct input_dev *dev, void *data,
+ struct ff_effect *effect)
+{
+ struct spmi_haptics *haptics = input_get_drvdata(dev);
+ uint32_t magnitude;
+
+ dev_dbg(haptics->dev, "%s: Rumbling with strong: %d and weak: %d",
+ __func__, effect->u.rumble.strong_magnitude,
+ effect->u.rumble.weak_magnitude);
+
+ magnitude = effect->u.rumble.strong_magnitude >> 8;
+ if (!magnitude)
+ magnitude = effect->u.rumble.weak_magnitude >> 10;
+
+ if (!magnitude)
+ haptics->vmax = 0;
+ else
+ haptics->vmax =
+ ((HAP_VMAX_MAX_MV - HAP_VMAX_MIN_MV) * magnitude) /
+ 100 +
+ HAP_VMAX_MIN_MV;
+
+ schedule_work(&haptics->work);
+
+ return 0;
+}
+
+/**
+ * spmi_haptics_close - callback for input device close
+ * @dev: input device pointer
+ *
+ * Turns off the vibrator.
+ */
+static void spmi_haptics_close(struct input_dev *dev)
+{
+ struct spmi_haptics *haptics = input_get_drvdata(dev);
+
+ cancel_work_sync(&haptics->work);
+ haptics->vmax = 0;
+
+ if (is_haptics_module_enabled(haptics))
+ haptics_stop_vibrate(haptics);
+}
+
+static int haptics_write_brake_pattern(struct spmi_haptics *haptics,
+ const uint8_t *brake_pattern)
+{
+ int ret, i;
+ uint8_t val = 0;
+
+ for (i = HAP_BRAKE_PAT_LEN - 1; i >= 0; i--)
+ val |= FIELD_PREP(HAP_BRAKE_PAT_MASK, brake_pattern[i])
+ << (i * 2);
+
+ ret = regmap_update_bits(haptics->regmap, haptics->base + HAP_BRAKE_REG,
+ 0xff, val);
+
+ return ret ?:
+ regmap_update_bits(haptics->regmap,
+ haptics->base + HAP_EN_CTL2_REG,
+ BRAKE_EN_BIT, BRAKE_EN_BIT);
+}
+
+static int haptics_init(struct spmi_haptics *haptics)
+{
+ int ret;
+ uint8_t val, mask;
+ uint16_t play_rate;
+
+ ret = regmap_update_bits(haptics->regmap, haptics->base + HAP_CFG1_REG,
+ HAP_ACT_TYPE_MASK, haptics->actuator_type);
+ if (ret)
+ return ret;
+
+ /*
+ * Configure auto resonance
+ * see qpnp_haptics_lra_auto_res_config downstream
+ * This is greatly simplified.
+ */
+ val = FIELD_PREP(LRA_RES_CAL_MASK, ilog2(32 / HAP_RES_CAL_PERIOD_MIN)) |
+ FIELD_PREP(LRA_AUTO_RES_MODE_MASK, HAP_AUTO_RES_ZXD_EOP) |
+ FIELD_PREP(LRA_HIGH_Z_MASK, 1);
+ mask = LRA_AUTO_RES_MODE_MASK | LRA_HIGH_Z_MASK | LRA_RES_CAL_MASK;
+
+ ret = regmap_update_bits(haptics->regmap,
+ haptics->base + HAP_LRA_AUTO_RES_REG, mask,
+ val);
+ if (ret)
+ return ret;
+
+ val = FIELD_PREP(HAP_WF_SOURCE_MASK, haptics->play_mode);
+ ret = regmap_update_bits(haptics->regmap, haptics->base + HAP_SEL_REG,
+ HAP_WF_SOURCE_MASK, val);
+ if (ret)
+ return ret;
+
+ ret = regmap_update_bits(haptics->regmap,
+ haptics->base + HAP_ILIM_CFG_REG,
+ HAP_ILIM_SEL_MASK, haptics->current_limit);
+ if (ret)
+ return ret;
+
+ /* Configure the debounce for short-circuit detection. */
+ ret = regmap_update_bits(haptics->regmap,
+ haptics->base + HAP_SC_DEB_REG,
+ HAP_SC_DEB_MASK, HAP_SC_DEB_CYCLES_MAX);
+ if (ret)
+ return ret;
+
+ ret = regmap_update_bits(haptics->regmap, haptics->base + HAP_CFG2_REG,
+ HAP_LRA_RES_TYPE_MASK, haptics->wave_shape);
+ if (ret)
+ return ret;
+
+ /*
+ * Configure RATE_CFG1 and RATE_CFG2 registers.
+ * Note: For ERM (unsupported) these registers act as play rate and
+ * for LRA these represent resonance period
+ */
+ play_rate = haptics->play_wave_rate / HAP_RATE_CFG_STEP_US;
+ val = FIELD_PREP(HAP_RATE_CFG1_MASK, play_rate);
+ ret = regmap_update_bits(haptics->regmap,
+ haptics->base + HAP_RATE_CFG1_REG,
+ HAP_RATE_CFG1_MASK, val);
+ val = FIELD_PREP(HAP_RATE_CFG2_MASK, play_rate >> 8);
+ ret = ret ?:
+ regmap_update_bits(haptics->regmap,
+ haptics->base + HAP_RATE_CFG2_REG,
+ HAP_RATE_CFG1_MASK, val);
+ if (ret)
+ return ret;
+
+ ret = haptics_write_brake_pattern(haptics, default_brake_pattern);
+ if (ret)
+ return ret;
+
+ /* Currently this is the only supported play mode */
+ if (haptics->play_mode == HAP_PLAY_BUFFER) {
+ /* zero repeats and zero sample repeats */
+ val = FIELD_PREP(WF_REPEAT_MASK, 0) |
+ FIELD_PREP(WF_S_REPEAT_MASK, 0);
+ ret = regmap_update_bits(haptics->regmap,
+ haptics->base + HAP_WF_REPEAT_REG,
+ WF_REPEAT_MASK | WF_S_REPEAT_MASK,
+ val);
+ if (ret)
+ return ret;
+
+ ret = regmap_bulk_write(haptics->regmap,
+ haptics->base + HAP_WF_S1_REG,
+ wave_sample_pattern, HAP_WAVE_SAMP_LEN);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int spmi_haptics_probe(struct platform_device *pdev)
+{
+ struct spmi_haptics *haptics;
+ struct input_dev *input_dev;
+ int ret, irq;
+
+ haptics = devm_kzalloc(&pdev->dev, sizeof(*haptics), GFP_KERNEL);
+ if (!haptics)
+ return -ENOMEM;
+
+ haptics->regmap = dev_get_regmap(pdev->dev.parent, NULL);
+ if (!haptics->regmap)
+ return -ENODEV;
+
+ haptics->dev = &pdev->dev;
+
+ platform_set_drvdata(pdev, haptics);
+
+ ret = device_property_read_u32(haptics->dev, "reg", &haptics->base);
+ if (ret)
+ return dev_err_probe(haptics->dev, ret,
+ "Couldn't read base address");
+
+ /* This is the only currently supported configuration, these values
+ * are left to allow future additions
+ */
+ haptics->actuator_type = HAP_TYPE_LRA;
+ haptics->play_mode = HAP_PLAY_BUFFER;
+ haptics->wave_shape = HAP_WAVE_SINE;
+ haptics->current_limit = HAP_ILIM_400_MA;
+
+ ret = device_property_read_u32(haptics->dev, "qcom,wave-play-rate-us",
+ &haptics->play_wave_rate);
+ if (ret)
+ return dev_err_probe(haptics->dev, ret,
+ "qcom,wave-play-rate-us is required\n");
+
+ INIT_WORK(&haptics->work, haptics_play_stop_work);
+
+ ret = haptics_init(haptics);
+ if (ret)
+ return ret;
+
+ input_dev = devm_input_allocate_device(&pdev->dev);
+ if (!input_dev)
+ return -ENOMEM;
+
+ input_dev->name = "spmi_haptics";
+ input_dev->id.version = 1;
+ input_dev->close = spmi_haptics_close;
+ input_set_drvdata(input_dev, haptics);
+
+ haptics->input = input_dev;
+
+ /* In the future this should become FF_PERIODIC */
+ input_set_capability(haptics->input, EV_FF, FF_RUMBLE);
+
+ ret = input_ff_create_memless(input_dev, NULL,
+ spmi_haptics_play_effect);
+ if (ret)
+ return dev_err_probe(
+ &pdev->dev, ret,
+ "Couldn't register haptics as EV_FF device\n");
+
+ ret = input_register_device(input_dev);
+ if (ret)
+ return dev_err_probe(&pdev->dev, ret,
+ "Couldn't register input device\n");
+
+ /* NOTE: the play IRQ is only used for buffer mode */
+ irq = platform_get_irq_byname(pdev, "play");
+ if (irq < 0) {
+ return dev_err_probe(&pdev->dev, irq,
+ "Unable to get play irq\n");
+ }
+ ret = devm_request_threaded_irq(haptics->dev, irq, NULL,
+ haptics_play_irq, IRQF_ONESHOT,
+ "haptics_play_irq", haptics);
+ if (ret)
+ return dev_err_probe(haptics->dev, ret,
+ "Couldn't request play irq\n");
+
+ irq = platform_get_irq_byname(pdev, "short");
+ if (irq < 0)
+ return dev_err_probe(&pdev->dev, irq,
+ "Unable to get short circut irq\n");
+ ret = devm_request_threaded_irq(haptics->dev, irq, NULL, haptics_sc_irq,
+ IRQF_ONESHOT, "haptics_short_irq",
+ haptics);
+ if (ret)
+ return dev_err_probe(haptics->dev, ret,
+ "Couldn't request short circuit irq\n");
+
+ mutex_init(&haptics->play_lock);
+
+ return 0;
+}
+
+static int __maybe_unused spmi_haptics_suspend(struct device *dev)
+{
+ struct spmi_haptics *haptics = dev_get_drvdata(dev);
+
+ cancel_work_sync(&haptics->work);
+ haptics_stop_vibrate(haptics);
+
+ return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(spmi_haptics_pm_ops, spmi_haptics_suspend, NULL);
+
+static int spmi_haptics_remove(struct platform_device *pdev)
+{
+ struct spmi_haptics *haptics = dev_get_drvdata(&pdev->dev);
+
+ cancel_work_sync(&haptics->work);
+ mutex_destroy(&haptics->play_lock);
+ input_unregister_device(haptics->input);
+
+ return 0;
+}
+
+static void spmi_haptics_shutdown(struct platform_device *pdev)
+{
+ struct spmi_haptics *haptics = dev_get_drvdata(&pdev->dev);
+
+ cancel_work_sync(&haptics->work);
+ haptics_stop_vibrate(haptics);
+}
+
+static const struct of_device_id spmi_haptics_match_table[] = {
+ { .compatible = "qcom,pmi8998-haptics" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, spmi_haptics_match_table);
+
+static struct platform_driver spmi_haptics_driver = {
+ .probe = spmi_haptics_probe,
+ .remove = spmi_haptics_remove,
+ .shutdown = spmi_haptics_shutdown,
+ .driver = {
+ .name = "spmi-haptics",
+ .pm = &spmi_haptics_pm_ops,
+ .of_match_table = spmi_haptics_match_table,
+ },
+};
+module_platform_driver(spmi_haptics_driver);
+
+MODULE_DESCRIPTION("spmi haptics driver using ff-memless framework");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Caleb Connolly <[email protected]>");
--
2.38.0
On 10/10/2022 12:30, Caleb Connolly wrote:
> Add support for the haptics found in pmi8998 and related PMICs.
> Based on the ff-memless interface. Currently this driver provides
> a partial implementation of hardware features.
>
> This driver only supports LRAs (Linear Resonant Actuators) in the "buffer"
> mode with a single wave pattern.
>
> Signed-off-by: Caleb Connolly <[email protected]>
> ---
> drivers/input/misc/Kconfig | 15 +
> drivers/input/misc/Makefile | 1 +
> drivers/input/misc/qcom-pmi8998-haptics.c | 690 ++++++++++++++++++++++
> 3 files changed, 706 insertions(+)
> create mode 100644 drivers/input/misc/qcom-pmi8998-haptics.c
>
> diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
> index a18ab7358d8f..c3b59ea23144 100644
> --- a/drivers/input/misc/Kconfig
> +++ b/drivers/input/misc/Kconfig
> @@ -186,6 +186,21 @@ config INPUT_PMIC8XXX_PWRKEY
> To compile this driver as a module, choose M here: the
> module will be called pmic8xxx-pwrkey.
>
> +config INPUT_QCOM_PMI8998_HAPTICS
> + tristate "Qualcomm SPMI HAPTICS"
> + depends on ARCH_QCOM
|| COMPILE_TEST
> + depends on MFD_PM8XXX || MFD_SPMI_PMIC
|| COMPILE_TEST (and actually test it)
> + select INPUT_FF_MEMLESS
> + help
> + This option enables support for the haptics found in pmi8998 and
> + related PMICs. Based on the ff-memless interface.
> +
> + This driver is for hardware too new for the INPUT_PM8XXX_VIBRATOR
> + driver.
> +
> + To compile this driver as module, choose M here: the
> + module will be called qcom_pmi8998_haptics.
> +
Best regards,
Krzysztof