Quite often, NIC devices do not need dma_sync operations
on x86_64 at least.
Indeed, when dev_is_dma_coherent(dev) is true and
dev_use_swiotlb(dev) is false, iommu_dma_sync_single_for_cpu()
and friends do nothing.
However, indirectly calling them when CONFIG_RETPOLINE=y
consumes about 10% of cycles on a cpu receiving packets
from softirq at ~100Gbit rate, as shown in [1]
Even if/when CONFIG_RETPOLINE is not set, there
is a cost of about 3%.
This patch adds a copy of iommu_dma_ops structure,
where sync_single_for_cpu, sync_single_for_device,
sync_sg_for_cpu and sync_sg_for_device are unset.
perf profile before the patch:
18.53% [kernel] [k] gq_rx_skb
14.77% [kernel] [k] napi_reuse_skb
8.95% [kernel] [k] skb_release_data
5.42% [kernel] [k] dev_gro_receive
5.37% [kernel] [k] memcpy
<*> 5.26% [kernel] [k] iommu_dma_sync_sg_for_cpu
4.78% [kernel] [k] tcp_gro_receive
<*> 4.42% [kernel] [k] iommu_dma_sync_sg_for_device
4.12% [kernel] [k] ipv6_gro_receive
3.65% [kernel] [k] gq_pool_get
3.25% [kernel] [k] skb_gro_receive
2.07% [kernel] [k] napi_gro_frags
1.98% [kernel] [k] tcp6_gro_receive
1.27% [kernel] [k] gq_rx_prep_buffers
1.18% [kernel] [k] gq_rx_napi_handler
0.99% [kernel] [k] csum_partial
0.74% [kernel] [k] csum_ipv6_magic
0.72% [kernel] [k] free_pcp_prepare
0.60% [kernel] [k] __napi_poll
0.58% [kernel] [k] net_rx_action
0.56% [kernel] [k] read_tsc
<*> 0.50% [kernel] [k] __x86_indirect_thunk_r11
0.45% [kernel] [k] memset
After patch, lines with <*> no longer show up, and overall
cpu usage looks much better (~60% instead of ~72%)
25.56% [kernel] [k] gq_rx_skb
9.90% [kernel] [k] napi_reuse_skb
7.39% [kernel] [k] dev_gro_receive
6.78% [kernel] [k] memcpy
6.53% [kernel] [k] skb_release_data
6.39% [kernel] [k] tcp_gro_receive
5.71% [kernel] [k] ipv6_gro_receive
4.35% [kernel] [k] napi_gro_frags
4.34% [kernel] [k] skb_gro_receive
3.50% [kernel] [k] gq_pool_get
3.08% [kernel] [k] gq_rx_napi_handler
2.35% [kernel] [k] tcp6_gro_receive
2.06% [kernel] [k] gq_rx_prep_buffers
1.32% [kernel] [k] csum_partial
0.93% [kernel] [k] csum_ipv6_magic
0.65% [kernel] [k] net_rx_action
Signed-off-by: Eric Dumazet <[email protected]>
Cc: Robin Murphy <[email protected]>
Cc: Joerg Roedel <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: [email protected]
---
drivers/iommu/dma-iommu.c | 67 +++++++++++++++++++++++++++------------
1 file changed, 47 insertions(+), 20 deletions(-)
diff --git a/drivers/iommu/dma-iommu.c b/drivers/iommu/dma-iommu.c
index 9297b741f5e80e2408e864fc3f779410d6b04d49..976ba20a55eab5fd94e9bec2d38a2a60e0690444 100644
--- a/drivers/iommu/dma-iommu.c
+++ b/drivers/iommu/dma-iommu.c
@@ -522,6 +522,11 @@ static bool dev_use_swiotlb(struct device *dev)
return IS_ENABLED(CONFIG_SWIOTLB) && dev_is_untrusted(dev);
}
+static bool dev_is_dma_sync_needed(struct device *dev)
+{
+ return !dev_is_dma_coherent(dev) || dev_use_swiotlb(dev);
+}
+
/**
* iommu_dma_init_domain - Initialise a DMA mapping domain
* @domain: IOMMU domain previously prepared by iommu_get_dma_cookie()
@@ -914,7 +919,7 @@ static void iommu_dma_sync_single_for_cpu(struct device *dev,
{
phys_addr_t phys;
- if (dev_is_dma_coherent(dev) && !dev_use_swiotlb(dev))
+ if (!dev_is_dma_sync_needed(dev))
return;
phys = iommu_iova_to_phys(iommu_get_dma_domain(dev), dma_handle);
@@ -930,7 +935,7 @@ static void iommu_dma_sync_single_for_device(struct device *dev,
{
phys_addr_t phys;
- if (dev_is_dma_coherent(dev) && !dev_use_swiotlb(dev))
+ if (!dev_is_dma_sync_needed(dev))
return;
phys = iommu_iova_to_phys(iommu_get_dma_domain(dev), dma_handle);
@@ -1544,30 +1549,51 @@ static size_t iommu_dma_opt_mapping_size(void)
return iova_rcache_range();
}
+#define iommu_dma_ops_common_fields \
+ .flags = DMA_F_PCI_P2PDMA_SUPPORTED, \
+ .alloc = iommu_dma_alloc, \
+ .free = iommu_dma_free, \
+ .alloc_pages = dma_common_alloc_pages, \
+ .free_pages = dma_common_free_pages, \
+ .alloc_noncontiguous = iommu_dma_alloc_noncontiguous, \
+ .free_noncontiguous = iommu_dma_free_noncontiguous, \
+ .mmap = iommu_dma_mmap, \
+ .get_sgtable = iommu_dma_get_sgtable, \
+ .map_page = iommu_dma_map_page, \
+ .unmap_page = iommu_dma_unmap_page, \
+ .map_sg = iommu_dma_map_sg, \
+ .unmap_sg = iommu_dma_unmap_sg, \
+ .map_resource = iommu_dma_map_resource, \
+ .unmap_resource = iommu_dma_unmap_resource, \
+ .get_merge_boundary = iommu_dma_get_merge_boundary, \
+ .opt_mapping_size = iommu_dma_opt_mapping_size,
+
static const struct dma_map_ops iommu_dma_ops = {
- .flags = DMA_F_PCI_P2PDMA_SUPPORTED,
- .alloc = iommu_dma_alloc,
- .free = iommu_dma_free,
- .alloc_pages = dma_common_alloc_pages,
- .free_pages = dma_common_free_pages,
- .alloc_noncontiguous = iommu_dma_alloc_noncontiguous,
- .free_noncontiguous = iommu_dma_free_noncontiguous,
- .mmap = iommu_dma_mmap,
- .get_sgtable = iommu_dma_get_sgtable,
- .map_page = iommu_dma_map_page,
- .unmap_page = iommu_dma_unmap_page,
- .map_sg = iommu_dma_map_sg,
- .unmap_sg = iommu_dma_unmap_sg,
+ iommu_dma_ops_common_fields
+
.sync_single_for_cpu = iommu_dma_sync_single_for_cpu,
.sync_single_for_device = iommu_dma_sync_single_for_device,
.sync_sg_for_cpu = iommu_dma_sync_sg_for_cpu,
.sync_sg_for_device = iommu_dma_sync_sg_for_device,
- .map_resource = iommu_dma_map_resource,
- .unmap_resource = iommu_dma_unmap_resource,
- .get_merge_boundary = iommu_dma_get_merge_boundary,
- .opt_mapping_size = iommu_dma_opt_mapping_size,
};
+/* Special instance of iommu_dma_ops for devices satisfying this condition:
+ * !dev_is_dma_sync_needed(dev)
+ *
+ * iommu_dma_sync_single_for_cpu(), iommu_dma_sync_single_for_device(),
+ * iommu_dma_sync_sg_for_cpu(), iommu_dma_sync_sg_for_device()
+ * do nothing special and can be avoided, saving indirect calls.
+ */
+static const struct dma_map_ops iommu_nosync_dma_ops = {
+ iommu_dma_ops_common_fields
+
+ .sync_single_for_cpu = NULL,
+ .sync_single_for_device = NULL,
+ .sync_sg_for_cpu = NULL,
+ .sync_sg_for_device = NULL,
+};
+#undef iommu_dma_ops_common_fields
+
/*
* The IOMMU core code allocates the default DMA domain, which the underlying
* IOMMU driver needs to support via the dma-iommu layer.
@@ -1586,7 +1612,8 @@ void iommu_setup_dma_ops(struct device *dev, u64 dma_base, u64 dma_limit)
if (iommu_is_dma_domain(domain)) {
if (iommu_dma_init_domain(domain, dma_base, dma_limit, dev))
goto out_err;
- dev->dma_ops = &iommu_dma_ops;
+ dev->dma_ops = dev_is_dma_sync_needed(dev) ?
+ &iommu_dma_ops : &iommu_nosync_dma_ops;
}
return;
--
2.38.1.431.g37b22c650d-goog
On 2022-11-12 04:04, Eric Dumazet wrote:
> Quite often, NIC devices do not need dma_sync operations
> on x86_64 at least.
>
> Indeed, when dev_is_dma_coherent(dev) is true and
> dev_use_swiotlb(dev) is false, iommu_dma_sync_single_for_cpu()
> and friends do nothing.
>
> However, indirectly calling them when CONFIG_RETPOLINE=y
> consumes about 10% of cycles on a cpu receiving packets
> from softirq at ~100Gbit rate, as shown in [1]
>
> Even if/when CONFIG_RETPOLINE is not set, there
> is a cost of about 3%.
>
> This patch adds a copy of iommu_dma_ops structure,
> where sync_single_for_cpu, sync_single_for_device,
> sync_sg_for_cpu and sync_sg_for_device are unset.
TBH I reckon it might be worthwhile to add another top-level bitfield to
struct device to indicate when syncs can be optimised out completely, so
we can handle it at the DMA API dispatch level and short-circuit a bit
more of the dma-direct path too.
> perf profile before the patch:
>
> 18.53% [kernel] [k] gq_rx_skb
> 14.77% [kernel] [k] napi_reuse_skb
> 8.95% [kernel] [k] skb_release_data
> 5.42% [kernel] [k] dev_gro_receive
> 5.37% [kernel] [k] memcpy
> <*> 5.26% [kernel] [k] iommu_dma_sync_sg_for_cpu
> 4.78% [kernel] [k] tcp_gro_receive
> <*> 4.42% [kernel] [k] iommu_dma_sync_sg_for_device
> 4.12% [kernel] [k] ipv6_gro_receive
> 3.65% [kernel] [k] gq_pool_get
> 3.25% [kernel] [k] skb_gro_receive
> 2.07% [kernel] [k] napi_gro_frags
> 1.98% [kernel] [k] tcp6_gro_receive
> 1.27% [kernel] [k] gq_rx_prep_buffers
> 1.18% [kernel] [k] gq_rx_napi_handler
> 0.99% [kernel] [k] csum_partial
> 0.74% [kernel] [k] csum_ipv6_magic
> 0.72% [kernel] [k] free_pcp_prepare
> 0.60% [kernel] [k] __napi_poll
> 0.58% [kernel] [k] net_rx_action
> 0.56% [kernel] [k] read_tsc
> <*> 0.50% [kernel] [k] __x86_indirect_thunk_r11
> 0.45% [kernel] [k] memset
>
> After patch, lines with <*> no longer show up, and overall
> cpu usage looks much better (~60% instead of ~72%)
>
> 25.56% [kernel] [k] gq_rx_skb
> 9.90% [kernel] [k] napi_reuse_skb
> 7.39% [kernel] [k] dev_gro_receive
> 6.78% [kernel] [k] memcpy
> 6.53% [kernel] [k] skb_release_data
> 6.39% [kernel] [k] tcp_gro_receive
> 5.71% [kernel] [k] ipv6_gro_receive
> 4.35% [kernel] [k] napi_gro_frags
> 4.34% [kernel] [k] skb_gro_receive
> 3.50% [kernel] [k] gq_pool_get
> 3.08% [kernel] [k] gq_rx_napi_handler
> 2.35% [kernel] [k] tcp6_gro_receive
> 2.06% [kernel] [k] gq_rx_prep_buffers
> 1.32% [kernel] [k] csum_partial
> 0.93% [kernel] [k] csum_ipv6_magic
> 0.65% [kernel] [k] net_rx_action
>
> Signed-off-by: Eric Dumazet <[email protected]>
> Cc: Robin Murphy <[email protected]>
> Cc: Joerg Roedel <[email protected]>
> Cc: Will Deacon <[email protected]>
> Cc: [email protected]
> ---
> drivers/iommu/dma-iommu.c | 67 +++++++++++++++++++++++++++------------
> 1 file changed, 47 insertions(+), 20 deletions(-)
>
> diff --git a/drivers/iommu/dma-iommu.c b/drivers/iommu/dma-iommu.c
> index 9297b741f5e80e2408e864fc3f779410d6b04d49..976ba20a55eab5fd94e9bec2d38a2a60e0690444 100644
> --- a/drivers/iommu/dma-iommu.c
> +++ b/drivers/iommu/dma-iommu.c
> @@ -522,6 +522,11 @@ static bool dev_use_swiotlb(struct device *dev)
> return IS_ENABLED(CONFIG_SWIOTLB) && dev_is_untrusted(dev);
> }
>
> +static bool dev_is_dma_sync_needed(struct device *dev)
> +{
> + return !dev_is_dma_coherent(dev) || dev_use_swiotlb(dev);
> +}
> +
> /**
> * iommu_dma_init_domain - Initialise a DMA mapping domain
> * @domain: IOMMU domain previously prepared by iommu_get_dma_cookie()
> @@ -914,7 +919,7 @@ static void iommu_dma_sync_single_for_cpu(struct device *dev,
> {
> phys_addr_t phys;
>
> - if (dev_is_dma_coherent(dev) && !dev_use_swiotlb(dev))
> + if (!dev_is_dma_sync_needed(dev))
> return;
>
> phys = iommu_iova_to_phys(iommu_get_dma_domain(dev), dma_handle);
> @@ -930,7 +935,7 @@ static void iommu_dma_sync_single_for_device(struct device *dev,
> {
> phys_addr_t phys;
>
> - if (dev_is_dma_coherent(dev) && !dev_use_swiotlb(dev))
> + if (!dev_is_dma_sync_needed(dev))
> return;
>
> phys = iommu_iova_to_phys(iommu_get_dma_domain(dev), dma_handle);
> @@ -1544,30 +1549,51 @@ static size_t iommu_dma_opt_mapping_size(void)
> return iova_rcache_range();
> }
>
> +#define iommu_dma_ops_common_fields \
> + .flags = DMA_F_PCI_P2PDMA_SUPPORTED, \
> + .alloc = iommu_dma_alloc, \
> + .free = iommu_dma_free, \
> + .alloc_pages = dma_common_alloc_pages, \
> + .free_pages = dma_common_free_pages, \
> + .alloc_noncontiguous = iommu_dma_alloc_noncontiguous, \
> + .free_noncontiguous = iommu_dma_free_noncontiguous, \
> + .mmap = iommu_dma_mmap, \
> + .get_sgtable = iommu_dma_get_sgtable, \
> + .map_page = iommu_dma_map_page, \
> + .unmap_page = iommu_dma_unmap_page, \
> + .map_sg = iommu_dma_map_sg, \
> + .unmap_sg = iommu_dma_unmap_sg, \
> + .map_resource = iommu_dma_map_resource, \
> + .unmap_resource = iommu_dma_unmap_resource, \
> + .get_merge_boundary = iommu_dma_get_merge_boundary, \
> + .opt_mapping_size = iommu_dma_opt_mapping_size,
> +
> static const struct dma_map_ops iommu_dma_ops = {
> - .flags = DMA_F_PCI_P2PDMA_SUPPORTED,
> - .alloc = iommu_dma_alloc,
> - .free = iommu_dma_free,
> - .alloc_pages = dma_common_alloc_pages,
> - .free_pages = dma_common_free_pages,
> - .alloc_noncontiguous = iommu_dma_alloc_noncontiguous,
> - .free_noncontiguous = iommu_dma_free_noncontiguous,
> - .mmap = iommu_dma_mmap,
> - .get_sgtable = iommu_dma_get_sgtable,
> - .map_page = iommu_dma_map_page,
> - .unmap_page = iommu_dma_unmap_page,
> - .map_sg = iommu_dma_map_sg,
> - .unmap_sg = iommu_dma_unmap_sg,
> + iommu_dma_ops_common_fields
> +
> .sync_single_for_cpu = iommu_dma_sync_single_for_cpu,
> .sync_single_for_device = iommu_dma_sync_single_for_device,
> .sync_sg_for_cpu = iommu_dma_sync_sg_for_cpu,
> .sync_sg_for_device = iommu_dma_sync_sg_for_device,
> - .map_resource = iommu_dma_map_resource,
> - .unmap_resource = iommu_dma_unmap_resource,
> - .get_merge_boundary = iommu_dma_get_merge_boundary,
> - .opt_mapping_size = iommu_dma_opt_mapping_size,
> };
>
> +/* Special instance of iommu_dma_ops for devices satisfying this condition:
> + * !dev_is_dma_sync_needed(dev)
> + *
> + * iommu_dma_sync_single_for_cpu(), iommu_dma_sync_single_for_device(),
> + * iommu_dma_sync_sg_for_cpu(), iommu_dma_sync_sg_for_device()
> + * do nothing special and can be avoided, saving indirect calls.
> + */
> +static const struct dma_map_ops iommu_nosync_dma_ops = {
> + iommu_dma_ops_common_fields
> +
> + .sync_single_for_cpu = NULL,
> + .sync_single_for_device = NULL,
> + .sync_sg_for_cpu = NULL,
> + .sync_sg_for_device = NULL,
> +};
> +#undef iommu_dma_ops_common_fields
> +
> /*
> * The IOMMU core code allocates the default DMA domain, which the underlying
> * IOMMU driver needs to support via the dma-iommu layer.
> @@ -1586,7 +1612,8 @@ void iommu_setup_dma_ops(struct device *dev, u64 dma_base, u64 dma_limit)
> if (iommu_is_dma_domain(domain)) {
> if (iommu_dma_init_domain(domain, dma_base, dma_limit, dev))
> goto out_err;
> - dev->dma_ops = &iommu_dma_ops;
> + dev->dma_ops = dev_is_dma_sync_needed(dev) ?
> + &iommu_dma_ops : &iommu_nosync_dma_ops;
This doesn't work, because at this point we don't know whether a
coherent device is still going to need SWIOTLB for DMA mask reasons or not.
Thanks,
Robin.
> }
>
> return;
On 2022-11-14 13:30, Robin Murphy wrote:
> On 2022-11-12 04:04, Eric Dumazet wrote:
>> Quite often, NIC devices do not need dma_sync operations
>> on x86_64 at least.
>>
>> Indeed, when dev_is_dma_coherent(dev) is true and
>> dev_use_swiotlb(dev) is false, iommu_dma_sync_single_for_cpu()
>> and friends do nothing.
>>
>> However, indirectly calling them when CONFIG_RETPOLINE=y
>> consumes about 10% of cycles on a cpu receiving packets
>> from softirq at ~100Gbit rate, as shown in [1]
>>
>> Even if/when CONFIG_RETPOLINE is not set, there
>> is a cost of about 3%.
>>
>> This patch adds a copy of iommu_dma_ops structure,
>> where sync_single_for_cpu, sync_single_for_device,
>> sync_sg_for_cpu and sync_sg_for_device are unset.
>
> TBH I reckon it might be worthwhile to add another top-level bitfield to
> struct device to indicate when syncs can be optimised out completely, so
> we can handle it at the DMA API dispatch level and short-circuit a bit
> more of the dma-direct path too.
>
>> perf profile before the patch:
>>
>> 18.53% [kernel] [k] gq_rx_skb
>> 14.77% [kernel] [k] napi_reuse_skb
>> 8.95% [kernel] [k] skb_release_data
>> 5.42% [kernel] [k] dev_gro_receive
>> 5.37% [kernel] [k] memcpy
>> <*> 5.26% [kernel] [k] iommu_dma_sync_sg_for_cpu
>> 4.78% [kernel] [k] tcp_gro_receive
>> <*> 4.42% [kernel] [k] iommu_dma_sync_sg_for_device
>> 4.12% [kernel] [k] ipv6_gro_receive
>> 3.65% [kernel] [k] gq_pool_get
>> 3.25% [kernel] [k] skb_gro_receive
>> 2.07% [kernel] [k] napi_gro_frags
>> 1.98% [kernel] [k] tcp6_gro_receive
>> 1.27% [kernel] [k] gq_rx_prep_buffers
>> 1.18% [kernel] [k] gq_rx_napi_handler
>> 0.99% [kernel] [k] csum_partial
>> 0.74% [kernel] [k] csum_ipv6_magic
>> 0.72% [kernel] [k] free_pcp_prepare
>> 0.60% [kernel] [k] __napi_poll
>> 0.58% [kernel] [k] net_rx_action
>> 0.56% [kernel] [k] read_tsc
>> <*> 0.50% [kernel] [k] __x86_indirect_thunk_r11
>> 0.45% [kernel] [k] memset
>>
>> After patch, lines with <*> no longer show up, and overall
>> cpu usage looks much better (~60% instead of ~72%)
>>
>> 25.56% [kernel] [k] gq_rx_skb
>> 9.90% [kernel] [k] napi_reuse_skb
>> 7.39% [kernel] [k] dev_gro_receive
>> 6.78% [kernel] [k] memcpy
>> 6.53% [kernel] [k] skb_release_data
>> 6.39% [kernel] [k] tcp_gro_receive
>> 5.71% [kernel] [k] ipv6_gro_receive
>> 4.35% [kernel] [k] napi_gro_frags
>> 4.34% [kernel] [k] skb_gro_receive
>> 3.50% [kernel] [k] gq_pool_get
>> 3.08% [kernel] [k] gq_rx_napi_handler
>> 2.35% [kernel] [k] tcp6_gro_receive
>> 2.06% [kernel] [k] gq_rx_prep_buffers
>> 1.32% [kernel] [k] csum_partial
>> 0.93% [kernel] [k] csum_ipv6_magic
>> 0.65% [kernel] [k] net_rx_action
>>
>> Signed-off-by: Eric Dumazet <[email protected]>
>> Cc: Robin Murphy <[email protected]>
>> Cc: Joerg Roedel <[email protected]>
>> Cc: Will Deacon <[email protected]>
>> Cc: [email protected]
>> ---
>> drivers/iommu/dma-iommu.c | 67 +++++++++++++++++++++++++++------------
>> 1 file changed, 47 insertions(+), 20 deletions(-)
>>
>> diff --git a/drivers/iommu/dma-iommu.c b/drivers/iommu/dma-iommu.c
>> index
>> 9297b741f5e80e2408e864fc3f779410d6b04d49..976ba20a55eab5fd94e9bec2d38a2a60e0690444 100644
>> --- a/drivers/iommu/dma-iommu.c
>> +++ b/drivers/iommu/dma-iommu.c
>> @@ -522,6 +522,11 @@ static bool dev_use_swiotlb(struct device *dev)
>> return IS_ENABLED(CONFIG_SWIOTLB) && dev_is_untrusted(dev);
>> }
>> +static bool dev_is_dma_sync_needed(struct device *dev)
>> +{
>> + return !dev_is_dma_coherent(dev) || dev_use_swiotlb(dev);
>> +}
>> +
>> /**
>> * iommu_dma_init_domain - Initialise a DMA mapping domain
>> * @domain: IOMMU domain previously prepared by iommu_get_dma_cookie()
>> @@ -914,7 +919,7 @@ static void iommu_dma_sync_single_for_cpu(struct
>> device *dev,
>> {
>> phys_addr_t phys;
>> - if (dev_is_dma_coherent(dev) && !dev_use_swiotlb(dev))
>> + if (!dev_is_dma_sync_needed(dev))
>> return;
>> phys = iommu_iova_to_phys(iommu_get_dma_domain(dev), dma_handle);
>> @@ -930,7 +935,7 @@ static void
>> iommu_dma_sync_single_for_device(struct device *dev,
>> {
>> phys_addr_t phys;
>> - if (dev_is_dma_coherent(dev) && !dev_use_swiotlb(dev))
>> + if (!dev_is_dma_sync_needed(dev))
>> return;
>> phys = iommu_iova_to_phys(iommu_get_dma_domain(dev), dma_handle);
>> @@ -1544,30 +1549,51 @@ static size_t iommu_dma_opt_mapping_size(void)
>> return iova_rcache_range();
>> }
>> +#define iommu_dma_ops_common_fields \
>> + .flags = DMA_F_PCI_P2PDMA_SUPPORTED, \
>> + .alloc = iommu_dma_alloc, \
>> + .free = iommu_dma_free, \
>> + .alloc_pages = dma_common_alloc_pages, \
>> + .free_pages = dma_common_free_pages, \
>> + .alloc_noncontiguous = iommu_dma_alloc_noncontiguous, \
>> + .free_noncontiguous = iommu_dma_free_noncontiguous, \
>> + .mmap = iommu_dma_mmap, \
>> + .get_sgtable = iommu_dma_get_sgtable, \
>> + .map_page = iommu_dma_map_page, \
>> + .unmap_page = iommu_dma_unmap_page, \
>> + .map_sg = iommu_dma_map_sg, \
>> + .unmap_sg = iommu_dma_unmap_sg, \
>> + .map_resource = iommu_dma_map_resource, \
>> + .unmap_resource = iommu_dma_unmap_resource, \
>> + .get_merge_boundary = iommu_dma_get_merge_boundary, \
>> + .opt_mapping_size = iommu_dma_opt_mapping_size,
>> +
>> static const struct dma_map_ops iommu_dma_ops = {
>> - .flags = DMA_F_PCI_P2PDMA_SUPPORTED,
>> - .alloc = iommu_dma_alloc,
>> - .free = iommu_dma_free,
>> - .alloc_pages = dma_common_alloc_pages,
>> - .free_pages = dma_common_free_pages,
>> - .alloc_noncontiguous = iommu_dma_alloc_noncontiguous,
>> - .free_noncontiguous = iommu_dma_free_noncontiguous,
>> - .mmap = iommu_dma_mmap,
>> - .get_sgtable = iommu_dma_get_sgtable,
>> - .map_page = iommu_dma_map_page,
>> - .unmap_page = iommu_dma_unmap_page,
>> - .map_sg = iommu_dma_map_sg,
>> - .unmap_sg = iommu_dma_unmap_sg,
>> + iommu_dma_ops_common_fields
>> +
>> .sync_single_for_cpu = iommu_dma_sync_single_for_cpu,
>> .sync_single_for_device = iommu_dma_sync_single_for_device,
>> .sync_sg_for_cpu = iommu_dma_sync_sg_for_cpu,
>> .sync_sg_for_device = iommu_dma_sync_sg_for_device,
>> - .map_resource = iommu_dma_map_resource,
>> - .unmap_resource = iommu_dma_unmap_resource,
>> - .get_merge_boundary = iommu_dma_get_merge_boundary,
>> - .opt_mapping_size = iommu_dma_opt_mapping_size,
>> };
>> +/* Special instance of iommu_dma_ops for devices satisfying this
>> condition:
>> + * !dev_is_dma_sync_needed(dev)
>> + *
>> + * iommu_dma_sync_single_for_cpu(), iommu_dma_sync_single_for_device(),
>> + * iommu_dma_sync_sg_for_cpu(), iommu_dma_sync_sg_for_device()
>> + * do nothing special and can be avoided, saving indirect calls.
>> + */
>> +static const struct dma_map_ops iommu_nosync_dma_ops = {
>> + iommu_dma_ops_common_fields
>> +
>> + .sync_single_for_cpu = NULL,
>> + .sync_single_for_device = NULL,
>> + .sync_sg_for_cpu = NULL,
>> + .sync_sg_for_device = NULL,
>> +};
>> +#undef iommu_dma_ops_common_fields
>> +
>> /*
>> * The IOMMU core code allocates the default DMA domain, which the
>> underlying
>> * IOMMU driver needs to support via the dma-iommu layer.
>> @@ -1586,7 +1612,8 @@ void iommu_setup_dma_ops(struct device *dev, u64
>> dma_base, u64 dma_limit)
>> if (iommu_is_dma_domain(domain)) {
>> if (iommu_dma_init_domain(domain, dma_base, dma_limit, dev))
>> goto out_err;
>> - dev->dma_ops = &iommu_dma_ops;
>> + dev->dma_ops = dev_is_dma_sync_needed(dev) ?
>> + &iommu_dma_ops : &iommu_nosync_dma_ops;
>
> This doesn't work, because at this point we don't know whether a
> coherent device is still going to need SWIOTLB for DMA mask reasons or not.
Wait, no, now I've completely confused myself... :(
This probably *is* OK since it's specifically iommu_dma_ops, not DMA ops
in general, and we don't support IOMMUs with addressing limitations of
their own. Plus the other reasons for hooking into SWIOTLB here that
have also muddled my brain have been for non-coherent stuff, so still
probably shouldn't make a difference.
Either way I do think it would be neatest to handle this higher up in
the API (not to mention apparently easier to reason about...)
Thanks,
Robin.
On Sat, Nov 12, 2022 at 04:04:52AM +0000, Eric Dumazet wrote:
> Quite often, NIC devices do not need dma_sync operations
> on x86_64 at least.
>
> Indeed, when dev_is_dma_coherent(dev) is true and
> dev_use_swiotlb(dev) is false, iommu_dma_sync_single_for_cpu()
> and friends do nothing.
>
> However, indirectly calling them when CONFIG_RETPOLINE=y
> consumes about 10% of cycles on a cpu receiving packets
> from softirq at ~100Gbit rate, as shown in [1]
>
> Even if/when CONFIG_RETPOLINE is not set, there
> is a cost of about 3%.
>
> This patch adds a copy of iommu_dma_ops structure,
> where sync_single_for_cpu, sync_single_for_device,
> sync_sg_for_cpu and sync_sg_for_device are unset.
Larysa from our team has found out this patch introduces also a
functional improvement for batch allocation in AF_XDP while iommmu is
turned on.
In 'xp_alloc_batch()' function there is a check if DMA needs a
synchronization. If so, batch allocation is not supported and we can
allocate only one buffer at a time.
The flag 'dma_need_sync' is being set according to the value returned by
the function 'dma_need_sync()' (from '/kernel/dma/mapping.c').
That function only checks if at least one of two DMA ops is defined:
'ops->sync_single_for_cpu' or 'ops->sync_single_for_device'.
> +static const struct dma_map_ops iommu_nosync_dma_ops = {
> + iommu_dma_ops_common_fields
> +
> + .sync_single_for_cpu = NULL,
> + .sync_single_for_device = NULL,
> + .sync_sg_for_cpu = NULL,
> + .sync_sg_for_device = NULL,
> +};
> +#undef iommu_dma_ops_common_fields
> +
> /*
> * The IOMMU core code allocates the default DMA domain, which the underlying
> * IOMMU driver needs to support via the dma-iommu layer.
> @@ -1586,7 +1612,8 @@ void iommu_setup_dma_ops(struct device *dev, u64 dma_base, u64 dma_limit)
> if (iommu_is_dma_domain(domain)) {
> if (iommu_dma_init_domain(domain, dma_base, dma_limit, dev))
> goto out_err;
> - dev->dma_ops = &iommu_dma_ops;
> + dev->dma_ops = dev_is_dma_sync_needed(dev) ?
> + &iommu_dma_ops : &iommu_nosync_dma_ops;
> }
>
> return;
This code removes defining 'sync_*' DMA ops if they are not actually
used. Thanks to that improvement the function 'dma_need_sync()' will
always return more meaningful information if any DMA synchronization is
actually needed for iommu.
Together with Larysa we have applied that patch and we can confirm it
helps for batch buffer allocation in AF_XDP ('xsk_buff_alloc_batch()'
call) when iommu is enabled.
On Tue, Nov 22, 2022 at 11:18 AM Michal Kubiak <[email protected]> wrote:
>
> On Sat, Nov 12, 2022 at 04:04:52AM +0000, Eric Dumazet wrote:
> > Quite often, NIC devices do not need dma_sync operations
> > on x86_64 at least.
> >
> > Indeed, when dev_is_dma_coherent(dev) is true and
> > dev_use_swiotlb(dev) is false, iommu_dma_sync_single_for_cpu()
> > and friends do nothing.
> >
> > However, indirectly calling them when CONFIG_RETPOLINE=y
> > consumes about 10% of cycles on a cpu receiving packets
> > from softirq at ~100Gbit rate, as shown in [1]
> >
> > Even if/when CONFIG_RETPOLINE is not set, there
> > is a cost of about 3%.
> >
> > This patch adds a copy of iommu_dma_ops structure,
> > where sync_single_for_cpu, sync_single_for_device,
> > sync_sg_for_cpu and sync_sg_for_device are unset.
>
>
> Larysa from our team has found out this patch introduces also a
> functional improvement for batch allocation in AF_XDP while iommmu is
> turned on.
> In 'xp_alloc_batch()' function there is a check if DMA needs a
> synchronization. If so, batch allocation is not supported and we can
> allocate only one buffer at a time.
>
> The flag 'dma_need_sync' is being set according to the value returned by
> the function 'dma_need_sync()' (from '/kernel/dma/mapping.c').
> That function only checks if at least one of two DMA ops is defined:
> 'ops->sync_single_for_cpu' or 'ops->sync_single_for_device'.
>
> > +static const struct dma_map_ops iommu_nosync_dma_ops = {
> > + iommu_dma_ops_common_fields
> > +
> > + .sync_single_for_cpu = NULL,
> > + .sync_single_for_device = NULL,
> > + .sync_sg_for_cpu = NULL,
> > + .sync_sg_for_device = NULL,
> > +};
> > +#undef iommu_dma_ops_common_fields
> > +
> > /*
> > * The IOMMU core code allocates the default DMA domain, which the underlying
> > * IOMMU driver needs to support via the dma-iommu layer.
> > @@ -1586,7 +1612,8 @@ void iommu_setup_dma_ops(struct device *dev, u64 dma_base, u64 dma_limit)
> > if (iommu_is_dma_domain(domain)) {
> > if (iommu_dma_init_domain(domain, dma_base, dma_limit, dev))
> > goto out_err;
> > - dev->dma_ops = &iommu_dma_ops;
> > + dev->dma_ops = dev_is_dma_sync_needed(dev) ?
> > + &iommu_dma_ops : &iommu_nosync_dma_ops;
> > }
> >
> > return;
>
> This code removes defining 'sync_*' DMA ops if they are not actually
> used. Thanks to that improvement the function 'dma_need_sync()' will
> always return more meaningful information if any DMA synchronization is
> actually needed for iommu.
>
> Together with Larysa we have applied that patch and we can confirm it
> helps for batch buffer allocation in AF_XDP ('xsk_buff_alloc_batch()'
> call) when iommu is enabled.
Thanks for testing !
I am quite busy relocating, I will address Christoph feedback next week.
On Tue, Nov 22, 2022 at 02:17:58PM -0500, Michal Kubiak wrote:
>
> Together with Larysa we have applied that patch and we can confirm it
> helps for batch buffer allocation in AF_XDP ('xsk_buff_alloc_batch()'
> call) when iommu is enabled.
I am sorry I have forgotten to add Larysa to this thread, adding.
Michal
Hi,
On 2022/11/12 12:04, Eric Dumazet wrote:
> Quite often, NIC devices do not need dma_sync operations
> on x86_64 at least.
>
> Indeed, when dev_is_dma_coherent(dev) is true and
> dev_use_swiotlb(dev) is false, iommu_dma_sync_single_for_cpu()
> and friends do nothing.
>
> However, indirectly calling them when CONFIG_RETPOLINE=y
> consumes about 10% of cycles on a cpu receiving packets
> from softirq at ~100Gbit rate, as shown in [1]
>
> Even if/when CONFIG_RETPOLINE is not set, there
> is a cost of about 3%.
>
> This patch adds a copy of iommu_dma_ops structure,
> where sync_single_for_cpu, sync_single_for_device,
> sync_sg_for_cpu and sync_sg_for_device are unset.
>
> perf profile before the patch:
>
> 18.53% [kernel] [k] gq_rx_skb
> 14.77% [kernel] [k] napi_reuse_skb
> 8.95% [kernel] [k] skb_release_data
> 5.42% [kernel] [k] dev_gro_receive
> 5.37% [kernel] [k] memcpy
> <*> 5.26% [kernel] [k] iommu_dma_sync_sg_for_cpu
> 4.78% [kernel] [k] tcp_gro_receive
> <*> 4.42% [kernel] [k] iommu_dma_sync_sg_for_device
> 4.12% [kernel] [k] ipv6_gro_receive
> 3.65% [kernel] [k] gq_pool_get
> 3.25% [kernel] [k] skb_gro_receive
> 2.07% [kernel] [k] napi_gro_frags
> 1.98% [kernel] [k] tcp6_gro_receive
> 1.27% [kernel] [k] gq_rx_prep_buffers
> 1.18% [kernel] [k] gq_rx_napi_handler
> 0.99% [kernel] [k] csum_partial
> 0.74% [kernel] [k] csum_ipv6_magic
> 0.72% [kernel] [k] free_pcp_prepare
> 0.60% [kernel] [k] __napi_poll
> 0.58% [kernel] [k] net_rx_action
> 0.56% [kernel] [k] read_tsc
> <*> 0.50% [kernel] [k] __x86_indirect_thunk_r11
> 0.45% [kernel] [k] memset
>
> After patch, lines with <*> no longer show up, and overall
> cpu usage looks much better (~60% instead of ~72%)
>
> 25.56% [kernel] [k] gq_rx_skb
> 9.90% [kernel] [k] napi_reuse_skb
> 7.39% [kernel] [k] dev_gro_receive
> 6.78% [kernel] [k] memcpy
> 6.53% [kernel] [k] skb_release_data
> 6.39% [kernel] [k] tcp_gro_receive
> 5.71% [kernel] [k] ipv6_gro_receive
> 4.35% [kernel] [k] napi_gro_frags
> 4.34% [kernel] [k] skb_gro_receive
> 3.50% [kernel] [k] gq_pool_get
> 3.08% [kernel] [k] gq_rx_napi_handler
> 2.35% [kernel] [k] tcp6_gro_receive
> 2.06% [kernel] [k] gq_rx_prep_buffers
> 1.32% [kernel] [k] csum_partial
> 0.93% [kernel] [k] csum_ipv6_magic
> 0.65% [kernel] [k] net_rx_action
>
> Signed-off-by: Eric Dumazet <[email protected]>
> Cc: Robin Murphy <[email protected]>
> Cc: Joerg Roedel <[email protected]>
> Cc: Will Deacon <[email protected]>
> Cc: [email protected]
> ---
> drivers/iommu/dma-iommu.c | 67 +++++++++++++++++++++++++++------------
> 1 file changed, 47 insertions(+), 20 deletions(-)
>
> diff --git a/drivers/iommu/dma-iommu.c b/drivers/iommu/dma-iommu.c
> index 9297b741f5e80e2408e864fc3f779410d6b04d49..976ba20a55eab5fd94e9bec2d38a2a60e0690444 100644
> --- a/drivers/iommu/dma-iommu.c
> +++ b/drivers/iommu/dma-iommu.c
> @@ -522,6 +522,11 @@ static bool dev_use_swiotlb(struct device *dev)
> return IS_ENABLED(CONFIG_SWIOTLB) && dev_is_untrusted(dev);
> }
>
> +static bool dev_is_dma_sync_needed(struct device *dev)
> +{
> + return !dev_is_dma_coherent(dev) || dev_use_swiotlb(dev);
> +}
> +
> /**
> * iommu_dma_init_domain - Initialise a DMA mapping domain
> * @domain: IOMMU domain previously prepared by iommu_get_dma_cookie()
> @@ -914,7 +919,7 @@ static void iommu_dma_sync_single_for_cpu(struct device *dev,
> {
> phys_addr_t phys;
>
> - if (dev_is_dma_coherent(dev) && !dev_use_swiotlb(dev))
> + if (!dev_is_dma_sync_needed(dev))
Seems this function is also called by iommu_dma_map_page() pair and it
already checked
if the device is coherent, so do we need this duplicate
dev_is_dma_sync_needed(dev) ?
How about we move this checking to iommu_dma_map_page()
/iommu_dma_unmap_page()
then no need checking here anymore ?
Thanks,
Ethan
> return;
>
> phys = iommu_iova_to_phys(iommu_get_dma_domain(dev), dma_handle);
> @@ -930,7 +935,7 @@ static void iommu_dma_sync_single_for_device(struct device *dev,
> {
> phys_addr_t phys;
>
> - if (dev_is_dma_coherent(dev) && !dev_use_swiotlb(dev))
> + if (!dev_is_dma_sync_needed(dev))
> return;
>
> phys = iommu_iova_to_phys(iommu_get_dma_domain(dev), dma_handle);
> @@ -1544,30 +1549,51 @@ static size_t iommu_dma_opt_mapping_size(void)
> return iova_rcache_range();
> }
>
> +#define iommu_dma_ops_common_fields \
> + .flags = DMA_F_PCI_P2PDMA_SUPPORTED, \
> + .alloc = iommu_dma_alloc, \
> + .free = iommu_dma_free, \
> + .alloc_pages = dma_common_alloc_pages, \
> + .free_pages = dma_common_free_pages, \
> + .alloc_noncontiguous = iommu_dma_alloc_noncontiguous, \
> + .free_noncontiguous = iommu_dma_free_noncontiguous, \
> + .mmap = iommu_dma_mmap, \
> + .get_sgtable = iommu_dma_get_sgtable, \
> + .map_page = iommu_dma_map_page, \
> + .unmap_page = iommu_dma_unmap_page, \
> + .map_sg = iommu_dma_map_sg, \
> + .unmap_sg = iommu_dma_unmap_sg, \
> + .map_resource = iommu_dma_map_resource, \
> + .unmap_resource = iommu_dma_unmap_resource, \
> + .get_merge_boundary = iommu_dma_get_merge_boundary, \
> + .opt_mapping_size = iommu_dma_opt_mapping_size,
> +
> static const struct dma_map_ops iommu_dma_ops = {
> - .flags = DMA_F_PCI_P2PDMA_SUPPORTED,
> - .alloc = iommu_dma_alloc,
> - .free = iommu_dma_free,
> - .alloc_pages = dma_common_alloc_pages,
> - .free_pages = dma_common_free_pages,
> - .alloc_noncontiguous = iommu_dma_alloc_noncontiguous,
> - .free_noncontiguous = iommu_dma_free_noncontiguous,
> - .mmap = iommu_dma_mmap,
> - .get_sgtable = iommu_dma_get_sgtable,
> - .map_page = iommu_dma_map_page,
> - .unmap_page = iommu_dma_unmap_page,
> - .map_sg = iommu_dma_map_sg,
> - .unmap_sg = iommu_dma_unmap_sg,
> + iommu_dma_ops_common_fields
> +
> .sync_single_for_cpu = iommu_dma_sync_single_for_cpu,
> .sync_single_for_device = iommu_dma_sync_single_for_device,
> .sync_sg_for_cpu = iommu_dma_sync_sg_for_cpu,
> .sync_sg_for_device = iommu_dma_sync_sg_for_device,
> - .map_resource = iommu_dma_map_resource,
> - .unmap_resource = iommu_dma_unmap_resource,
> - .get_merge_boundary = iommu_dma_get_merge_boundary,
> - .opt_mapping_size = iommu_dma_opt_mapping_size,
> };
>
> +/* Special instance of iommu_dma_ops for devices satisfying this condition:
> + * !dev_is_dma_sync_needed(dev)
> + *
> + * iommu_dma_sync_single_for_cpu(), iommu_dma_sync_single_for_device(),
> + * iommu_dma_sync_sg_for_cpu(), iommu_dma_sync_sg_for_device()
> + * do nothing special and can be avoided, saving indirect calls.
> + */
> +static const struct dma_map_ops iommu_nosync_dma_ops = {
> + iommu_dma_ops_common_fields
> +
> + .sync_single_for_cpu = NULL,
> + .sync_single_for_device = NULL,
> + .sync_sg_for_cpu = NULL,
> + .sync_sg_for_device = NULL,
> +};
> +#undef iommu_dma_ops_common_fields
> +
> /*
> * The IOMMU core code allocates the default DMA domain, which the underlying
> * IOMMU driver needs to support via the dma-iommu layer.
> @@ -1586,7 +1612,8 @@ void iommu_setup_dma_ops(struct device *dev, u64 dma_base, u64 dma_limit)
> if (iommu_is_dma_domain(domain)) {
> if (iommu_dma_init_domain(domain, dma_base, dma_limit, dev))
> goto out_err;
> - dev->dma_ops = &iommu_dma_ops;
> + dev->dma_ops = dev_is_dma_sync_needed(dev) ?
> + &iommu_dma_ops : &iommu_nosync_dma_ops;
> }
>
> return;