Now that several D1-based boards are supported, enable the platform in
our defconfig. Build in the drivers which are necessary to boot, such as
the pinctrl, MMC, RTC (which provides critical clocks), SPI (for flash),
and watchdog (which may be left enabled by the bootloader). Other common
onboard peripherals are enabled as modules.
Acked-by: Palmer Dabbelt <[email protected]>
Reviewed-by: Guo Ren <[email protected]>
Signed-off-by: Samuel Holland <[email protected]>
---
(no changes since v1)
arch/riscv/configs/defconfig | 22 +++++++++++++++++++++-
1 file changed, 21 insertions(+), 1 deletion(-)
diff --git a/arch/riscv/configs/defconfig b/arch/riscv/configs/defconfig
index 74ed7037314f..368175560da9 100644
--- a/arch/riscv/configs/defconfig
+++ b/arch/riscv/configs/defconfig
@@ -25,6 +25,7 @@ CONFIG_BLK_DEV_INITRD=y
CONFIG_EXPERT=y
# CONFIG_SYSFS_SYSCALL is not set
CONFIG_PROFILING=y
+CONFIG_ARCH_SUNXI=y
CONFIG_SOC_MICROCHIP_POLARFIRE=y
CONFIG_SOC_SIFIVE=y
CONFIG_SOC_STARFIVE=y
@@ -119,8 +120,10 @@ CONFIG_VIRTIO_NET=y
CONFIG_MACB=y
CONFIG_E1000E=y
CONFIG_R8169=y
+CONFIG_STMMAC_ETH=m
CONFIG_MICROSEMI_PHY=y
CONFIG_INPUT_MOUSEDEV=y
+CONFIG_KEYBOARD_SUN4I_LRADC=m
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DW=y
@@ -128,14 +131,20 @@ CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_VIRTIO_CONSOLE=y
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_VIRTIO=y
+CONFIG_I2C_MV64XXX=m
CONFIG_SPI=y
CONFIG_SPI_SIFIVE=y
+CONFIG_SPI_SUN6I=y
# CONFIG_PTP_1588_CLOCK is not set
-CONFIG_GPIOLIB=y
CONFIG_GPIO_SIFIVE=y
+CONFIG_WATCHDOG=y
+CONFIG_SUNXI_WATCHDOG=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_DRM=m
CONFIG_DRM_RADEON=m
CONFIG_DRM_NOUVEAU=m
+CONFIG_DRM_SUN4I=m
CONFIG_DRM_VIRTIO_GPU=m
CONFIG_FB=y
CONFIG_FRAMEBUFFER_CONSOLE=y
@@ -148,19 +157,30 @@ CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PLATFORM=y
CONFIG_USB_STORAGE=y
CONFIG_USB_UAS=y
+CONFIG_USB_MUSB_HDRC=m
+CONFIG_USB_MUSB_SUNXI=m
+CONFIG_NOP_USB_XCEIV=m
CONFIG_MMC=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_SDHCI_CADENCE=y
CONFIG_MMC_SPI=y
+CONFIG_MMC_SUNXI=y
CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_SUN6I=y
+CONFIG_DMADEVICES=y
+CONFIG_DMA_SUN6I=m
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_BALLOON=y
CONFIG_VIRTIO_INPUT=y
CONFIG_VIRTIO_MMIO=y
+CONFIG_SUN8I_DE2_CCU=m
+CONFIG_SUN50I_IOMMU=y
CONFIG_RPMSG_CHAR=y
CONFIG_RPMSG_CTRL=y
CONFIG_RPMSG_VIRTIO=y
+CONFIG_PHY_SUN4I_USB=m
+CONFIG_NVMEM_SUNXI_SID=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
--
2.37.4
On 8 December 2022 10:02:37 GMT+01:00, Samuel Holland <[email protected]> wrote:
>Now that several D1-based boards are supported, enable the platform in
>our defconfig. Build in the drivers which are necessary to boot, such as
>the pinctrl, MMC, RTC (which provides critical clocks), SPI (for flash),
>and watchdog (which may be left enabled by the bootloader). Other common
>onboard peripherals are enabled as modules.
>
>Acked-by: Palmer Dabbelt <[email protected]>
I'm more than happy if he's happy ;)
Acked-by: Conor Dooley <[email protected]>
>Reviewed-by: Guo Ren <[email protected]>
>Signed-off-by: Samuel Holland <[email protected]>
>---
>
>(no changes since v1)
>
> arch/riscv/configs/defconfig | 22 +++++++++++++++++++++-
> 1 file changed, 21 insertions(+), 1 deletion(-)
>
>diff --git a/arch/riscv/configs/defconfig b/arch/riscv/configs/defconfig
>index 74ed7037314f..368175560da9 100644
>--- a/arch/riscv/configs/defconfig
>+++ b/arch/riscv/configs/defconfig
>@@ -25,6 +25,7 @@ CONFIG_BLK_DEV_INITRD=y
> CONFIG_EXPERT=y
> # CONFIG_SYSFS_SYSCALL is not set
> CONFIG_PROFILING=y
>+CONFIG_ARCH_SUNXI=y
> CONFIG_SOC_MICROCHIP_POLARFIRE=y
> CONFIG_SOC_SIFIVE=y
> CONFIG_SOC_STARFIVE=y
>@@ -119,8 +120,10 @@ CONFIG_VIRTIO_NET=y
> CONFIG_MACB=y
> CONFIG_E1000E=y
> CONFIG_R8169=y
>+CONFIG_STMMAC_ETH=m
> CONFIG_MICROSEMI_PHY=y
> CONFIG_INPUT_MOUSEDEV=y
>+CONFIG_KEYBOARD_SUN4I_LRADC=m
> CONFIG_SERIAL_8250=y
> CONFIG_SERIAL_8250_CONSOLE=y
> CONFIG_SERIAL_8250_DW=y
>@@ -128,14 +131,20 @@ CONFIG_SERIAL_OF_PLATFORM=y
> CONFIG_VIRTIO_CONSOLE=y
> CONFIG_HW_RANDOM=y
> CONFIG_HW_RANDOM_VIRTIO=y
>+CONFIG_I2C_MV64XXX=m
> CONFIG_SPI=y
> CONFIG_SPI_SIFIVE=y
>+CONFIG_SPI_SUN6I=y
> # CONFIG_PTP_1588_CLOCK is not set
>-CONFIG_GPIOLIB=y
> CONFIG_GPIO_SIFIVE=y
>+CONFIG_WATCHDOG=y
>+CONFIG_SUNXI_WATCHDOG=y
>+CONFIG_REGULATOR=y
>+CONFIG_REGULATOR_FIXED_VOLTAGE=y
> CONFIG_DRM=m
> CONFIG_DRM_RADEON=m
> CONFIG_DRM_NOUVEAU=m
>+CONFIG_DRM_SUN4I=m
> CONFIG_DRM_VIRTIO_GPU=m
> CONFIG_FB=y
> CONFIG_FRAMEBUFFER_CONSOLE=y
>@@ -148,19 +157,30 @@ CONFIG_USB_OHCI_HCD=y
> CONFIG_USB_OHCI_HCD_PLATFORM=y
> CONFIG_USB_STORAGE=y
> CONFIG_USB_UAS=y
>+CONFIG_USB_MUSB_HDRC=m
>+CONFIG_USB_MUSB_SUNXI=m
>+CONFIG_NOP_USB_XCEIV=m
> CONFIG_MMC=y
> CONFIG_MMC_SDHCI=y
> CONFIG_MMC_SDHCI_PLTFM=y
> CONFIG_MMC_SDHCI_CADENCE=y
> CONFIG_MMC_SPI=y
>+CONFIG_MMC_SUNXI=y
> CONFIG_RTC_CLASS=y
>+CONFIG_RTC_DRV_SUN6I=y
>+CONFIG_DMADEVICES=y
>+CONFIG_DMA_SUN6I=m
> CONFIG_VIRTIO_PCI=y
> CONFIG_VIRTIO_BALLOON=y
> CONFIG_VIRTIO_INPUT=y
> CONFIG_VIRTIO_MMIO=y
>+CONFIG_SUN8I_DE2_CCU=m
>+CONFIG_SUN50I_IOMMU=y
> CONFIG_RPMSG_CHAR=y
> CONFIG_RPMSG_CTRL=y
> CONFIG_RPMSG_VIRTIO=y
>+CONFIG_PHY_SUN4I_USB=m
>+CONFIG_NVMEM_SUNXI_SID=y
> CONFIG_EXT4_FS=y
> CONFIG_EXT4_FS_POSIX_ACL=y
> CONFIG_EXT4_FS_SECURITY=y
Am Donnerstag, 8. Dezember 2022, 10:02:37 CET schrieb Samuel Holland:
> Now that several D1-based boards are supported, enable the platform in
> our defconfig. Build in the drivers which are necessary to boot, such as
> the pinctrl, MMC, RTC (which provides critical clocks), SPI (for flash),
> and watchdog (which may be left enabled by the bootloader). Other common
> onboard peripherals are enabled as modules.
>
> Acked-by: Palmer Dabbelt <[email protected]>
> Reviewed-by: Guo Ren <[email protected]>
> Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Heiko Stuebner <[email protected]>