Changes since v2:
- Documented the registers to the best of my knowledge
- Used macros for on/off panel registers
- Added SPI id_table (non-requested change, fixes a warning in dmesg)
---
Changes since v1:
- fixed the dt-bindings maintainer email adress
- dropped backlight, port, power-supply and reset-gpios as they're
provided by panel-common.yaml as pointed by Krzysztof Kozlowski
- changed reg: true to reg : maxItems: 1
Christophe Branchereau (2):
drm/panel: add the orisetech ota5601a
dt-bindings: display/panel: Add the Focaltech gpt3
.../display/panel/focaltech,gpt3.yaml | 56 +++
drivers/gpu/drm/panel/Kconfig | 9 +
drivers/gpu/drm/panel/Makefile | 1 +
.../gpu/drm/panel/panel-orisetech-ota5601a.c | 364 ++++++++++++++++++
4 files changed, 430 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/panel/focaltech,gpt3.yaml
create mode 100644 drivers/gpu/drm/panel/panel-orisetech-ota5601a.c
--
2.35.1
On Mon, Dec 19, 2022 at 8:52 PM Christophe Branchereau
<[email protected]> wrote:
> Changes since v2:
This v3 patch set applied and pushed to drm-misc-next.
There were some minor checkpatch warnings that I just fixed
up while applying. Check the result in linux-next once it percolates.
Yours,
Linus Walleij