From: Wenchao Hao <[email protected]>
[ Upstream commit a3be19b91ea7121d388084e8c07f5b1b982eb40c ]
It was observed that the kernel would potentially send
ISCSI_KEVENT_UNBIND_SESSION multiple times. Introduce 'target_state' in
iscsi_cls_session() to make sure session will send only one unbind session
event.
This introduces a regression wrt. the issue fixed in commit 13e60d3ba287
("scsi: iscsi: Report unbind session event when the target has been
removed"). If iscsid dies for any reason after sending an unbind session to
kernel, once iscsid is restarted, the kernel's ISCSI_KEVENT_UNBIND_SESSION
event is lost and userspace is then unable to logout. However, the session
is actually in invalid state (its target_id is INVALID) so iscsid should
not sync this session during restart.
Consequently we need to check the session's target state during iscsid
restart. If session is in unbound state, do not sync this session and
perform session teardown. This is OK because once a session is unbound, we
can not recover it any more (mainly because its target id is INVALID).
Signed-off-by: Wenchao Hao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Mike Christie <[email protected]>
Reviewed-by: Wu Bo <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/scsi_transport_iscsi.c | 50 ++++++++++++++++++++++++++---
include/scsi/scsi_transport_iscsi.h | 9 ++++++
2 files changed, 54 insertions(+), 5 deletions(-)
diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c
index cc39cbef9d7f..4d23e5af20d3 100644
--- a/drivers/scsi/scsi_transport_iscsi.c
+++ b/drivers/scsi/scsi_transport_iscsi.c
@@ -1679,6 +1679,13 @@ static const char *iscsi_session_state_name(int state)
return name;
}
+static char *iscsi_session_target_state_name[] = {
+ [ISCSI_SESSION_TARGET_UNBOUND] = "UNBOUND",
+ [ISCSI_SESSION_TARGET_ALLOCATED] = "ALLOCATED",
+ [ISCSI_SESSION_TARGET_SCANNED] = "SCANNED",
+ [ISCSI_SESSION_TARGET_UNBINDING] = "UNBINDING",
+};
+
int iscsi_session_chkready(struct iscsi_cls_session *session)
{
int err;
@@ -1807,9 +1814,13 @@ static int iscsi_user_scan_session(struct device *dev, void *data)
if ((scan_data->channel == SCAN_WILD_CARD ||
scan_data->channel == 0) &&
(scan_data->id == SCAN_WILD_CARD ||
- scan_data->id == id))
+ scan_data->id == id)) {
scsi_scan_target(&session->dev, 0, id,
scan_data->lun, scan_data->rescan);
+ spin_lock_irqsave(&session->lock, flags);
+ session->target_state = ISCSI_SESSION_TARGET_SCANNED;
+ spin_unlock_irqrestore(&session->lock, flags);
+ }
}
user_scan_exit:
@@ -1998,31 +2009,41 @@ static void __iscsi_unbind_session(struct work_struct *work)
struct iscsi_cls_host *ihost = shost->shost_data;
unsigned long flags;
unsigned int target_id;
+ bool remove_target = true;
ISCSI_DBG_TRANS_SESSION(session, "Unbinding session\n");
/* Prevent new scans and make sure scanning is not in progress */
mutex_lock(&ihost->mutex);
spin_lock_irqsave(&session->lock, flags);
- if (session->target_id == ISCSI_MAX_TARGET) {
+ if (session->target_state == ISCSI_SESSION_TARGET_ALLOCATED) {
+ remove_target = false;
+ } else if (session->target_state != ISCSI_SESSION_TARGET_SCANNED) {
spin_unlock_irqrestore(&session->lock, flags);
mutex_unlock(&ihost->mutex);
- goto unbind_session_exit;
+ ISCSI_DBG_TRANS_SESSION(session,
+ "Skipping target unbinding: Session is unbound/unbinding.\n");
+ return;
}
+ session->target_state = ISCSI_SESSION_TARGET_UNBINDING;
target_id = session->target_id;
session->target_id = ISCSI_MAX_TARGET;
spin_unlock_irqrestore(&session->lock, flags);
mutex_unlock(&ihost->mutex);
- scsi_remove_target(&session->dev);
+ if (remove_target)
+ scsi_remove_target(&session->dev);
if (session->ida_used)
ida_simple_remove(&iscsi_sess_ida, target_id);
-unbind_session_exit:
iscsi_session_event(session, ISCSI_KEVENT_UNBIND_SESSION);
ISCSI_DBG_TRANS_SESSION(session, "Completed target removal\n");
+
+ spin_lock_irqsave(&session->lock, flags);
+ session->target_state = ISCSI_SESSION_TARGET_UNBOUND;
+ spin_unlock_irqrestore(&session->lock, flags);
}
static void __iscsi_destroy_session(struct work_struct *work)
@@ -2091,6 +2112,9 @@ int iscsi_add_session(struct iscsi_cls_session *session, unsigned int target_id)
session->ida_used = true;
} else
session->target_id = target_id;
+ spin_lock_irqsave(&session->lock, flags);
+ session->target_state = ISCSI_SESSION_TARGET_ALLOCATED;
+ spin_unlock_irqrestore(&session->lock, flags);
dev_set_name(&session->dev, "session%u", session->sid);
err = device_add(&session->dev);
@@ -4391,6 +4415,19 @@ iscsi_session_attr(def_taskmgmt_tmo, ISCSI_PARAM_DEF_TASKMGMT_TMO, 0);
iscsi_session_attr(discovery_parent_idx, ISCSI_PARAM_DISCOVERY_PARENT_IDX, 0);
iscsi_session_attr(discovery_parent_type, ISCSI_PARAM_DISCOVERY_PARENT_TYPE, 0);
+static ssize_t
+show_priv_session_target_state(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct iscsi_cls_session *session = iscsi_dev_to_session(dev->parent);
+
+ return sysfs_emit(buf, "%s\n",
+ iscsi_session_target_state_name[session->target_state]);
+}
+
+static ISCSI_CLASS_ATTR(priv_sess, target_state, S_IRUGO,
+ show_priv_session_target_state, NULL);
+
static ssize_t
show_priv_session_state(struct device *dev, struct device_attribute *attr,
char *buf)
@@ -4493,6 +4530,7 @@ static struct attribute *iscsi_session_attrs[] = {
&dev_attr_sess_boot_target.attr,
&dev_attr_priv_sess_recovery_tmo.attr,
&dev_attr_priv_sess_state.attr,
+ &dev_attr_priv_sess_target_state.attr,
&dev_attr_priv_sess_creator.attr,
&dev_attr_sess_chap_out_idx.attr,
&dev_attr_sess_chap_in_idx.attr,
@@ -4606,6 +4644,8 @@ static umode_t iscsi_session_attr_is_visible(struct kobject *kobj,
return S_IRUGO | S_IWUSR;
else if (attr == &dev_attr_priv_sess_state.attr)
return S_IRUGO;
+ else if (attr == &dev_attr_priv_sess_target_state.attr)
+ return S_IRUGO;
else if (attr == &dev_attr_priv_sess_creator.attr)
return S_IRUGO;
else if (attr == &dev_attr_priv_sess_target_id.attr)
diff --git a/include/scsi/scsi_transport_iscsi.h b/include/scsi/scsi_transport_iscsi.h
index 0f2f149ad916..304ccf153928 100644
--- a/include/scsi/scsi_transport_iscsi.h
+++ b/include/scsi/scsi_transport_iscsi.h
@@ -236,6 +236,14 @@ enum {
ISCSI_SESSION_FREE,
};
+enum {
+ ISCSI_SESSION_TARGET_UNBOUND,
+ ISCSI_SESSION_TARGET_ALLOCATED,
+ ISCSI_SESSION_TARGET_SCANNED,
+ ISCSI_SESSION_TARGET_UNBINDING,
+ ISCSI_SESSION_TARGET_MAX,
+};
+
#define ISCSI_MAX_TARGET -1
struct iscsi_cls_session {
@@ -262,6 +270,7 @@ struct iscsi_cls_session {
*/
pid_t creator;
int state;
+ int target_state; /* session target bind state */
int sid; /* session id */
void *dd_data; /* LLD private data */
struct device dev; /* sysfs transport/container device */
--
2.35.1
From: Heiko Carstens <[email protected]>
[ Upstream commit 42400d99e9f0728c17240edb9645637ead40f6b9 ]
Use READ_ONCE() before cmpxchg() to prevent that the compiler generates
code that fetches the to be compared old value several times from memory.
Reviewed-by: Christian Borntraeger <[email protected]>
Acked-by: Christian Borntraeger <[email protected]>
Reviewed-by: Claudio Imbrenda <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Heiko Carstens <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/s390/kvm/interrupt.c | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)
diff --git a/arch/s390/kvm/interrupt.c b/arch/s390/kvm/interrupt.c
index 8ce03a5ca863..ca7d09f09809 100644
--- a/arch/s390/kvm/interrupt.c
+++ b/arch/s390/kvm/interrupt.c
@@ -81,8 +81,9 @@ static int sca_inject_ext_call(struct kvm_vcpu *vcpu, int src_id)
struct esca_block *sca = vcpu->kvm->arch.sca;
union esca_sigp_ctrl *sigp_ctrl =
&(sca->cpu[vcpu->vcpu_id].sigp_ctrl);
- union esca_sigp_ctrl new_val = {0}, old_val = *sigp_ctrl;
+ union esca_sigp_ctrl new_val = {0}, old_val;
+ old_val = READ_ONCE(*sigp_ctrl);
new_val.scn = src_id;
new_val.c = 1;
old_val.c = 0;
@@ -93,8 +94,9 @@ static int sca_inject_ext_call(struct kvm_vcpu *vcpu, int src_id)
struct bsca_block *sca = vcpu->kvm->arch.sca;
union bsca_sigp_ctrl *sigp_ctrl =
&(sca->cpu[vcpu->vcpu_id].sigp_ctrl);
- union bsca_sigp_ctrl new_val = {0}, old_val = *sigp_ctrl;
+ union bsca_sigp_ctrl new_val = {0}, old_val;
+ old_val = READ_ONCE(*sigp_ctrl);
new_val.scn = src_id;
new_val.c = 1;
old_val.c = 0;
@@ -124,16 +126,18 @@ static void sca_clear_ext_call(struct kvm_vcpu *vcpu)
struct esca_block *sca = vcpu->kvm->arch.sca;
union esca_sigp_ctrl *sigp_ctrl =
&(sca->cpu[vcpu->vcpu_id].sigp_ctrl);
- union esca_sigp_ctrl old = *sigp_ctrl;
+ union esca_sigp_ctrl old;
+ old = READ_ONCE(*sigp_ctrl);
expect = old.value;
rc = cmpxchg(&sigp_ctrl->value, old.value, 0);
} else {
struct bsca_block *sca = vcpu->kvm->arch.sca;
union bsca_sigp_ctrl *sigp_ctrl =
&(sca->cpu[vcpu->vcpu_id].sigp_ctrl);
- union bsca_sigp_ctrl old = *sigp_ctrl;
+ union bsca_sigp_ctrl old;
+ old = READ_ONCE(*sigp_ctrl);
expect = old.value;
rc = cmpxchg(&sigp_ctrl->value, old.value, 0);
}
--
2.35.1
From: Mark Brown <[email protected]>
[ Upstream commit 242fc66ae6e1e2b8519daacc7590a73cd0e8a6e4 ]
The fsl-asoc-card AC'97 support currently tries to route to Playback and
Capture widgets provided by the AC'97 CODEC. This doesn't work since the
generic AC'97 driver registers with an "AC97" at the front of the stream
and hence widget names, update to reflect reality. It's not clear to me
if or how this ever worked.
Acked-by: Shengjiu Wang <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/fsl/fsl-asoc-card.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/sound/soc/fsl/fsl-asoc-card.c b/sound/soc/fsl/fsl-asoc-card.c
index 978496c2fc09..5000d779aade 100644
--- a/sound/soc/fsl/fsl-asoc-card.c
+++ b/sound/soc/fsl/fsl-asoc-card.c
@@ -120,8 +120,8 @@ static const struct snd_soc_dapm_route audio_map[] = {
static const struct snd_soc_dapm_route audio_map_ac97[] = {
/* 1st half -- Normal DAPM routes */
- {"Playback", NULL, "CPU AC97 Playback"},
- {"CPU AC97 Capture", NULL, "Capture"},
+ {"AC97 Playback", NULL, "CPU AC97 Playback"},
+ {"CPU AC97 Capture", NULL, "AC97 Capture"},
/* 2nd half -- ASRC DAPM routes */
{"CPU AC97 Playback", NULL, "ASRC-Playback"},
{"ASRC-Capture", NULL, "CPU AC97 Capture"},
--
2.35.1
From: Miles Chen <[email protected]>
[ Upstream commit 08f0adb193c008de640fde34a2e00a666c01d77c ]
Use NULL for NULL pointer to fix the following sparse warning:
drivers/cpufreq/armada-37xx-cpufreq.c:448:32: sparse: warning: Using plain integer as NULL pointer
Signed-off-by: Miles Chen <[email protected]>
Signed-off-by: Viresh Kumar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/cpufreq/armada-37xx-cpufreq.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/cpufreq/armada-37xx-cpufreq.c b/drivers/cpufreq/armada-37xx-cpufreq.c
index c10fc33b29b1..b74289a95a17 100644
--- a/drivers/cpufreq/armada-37xx-cpufreq.c
+++ b/drivers/cpufreq/armada-37xx-cpufreq.c
@@ -445,7 +445,7 @@ static int __init armada37xx_cpufreq_driver_init(void)
return -ENODEV;
}
- clk = clk_get(cpu_dev, 0);
+ clk = clk_get(cpu_dev, NULL);
if (IS_ERR(clk)) {
dev_err(cpu_dev, "Cannot get clock for CPU0\n");
return PTR_ERR(clk);
--
2.35.1
From: Max Filippov <[email protected]>
[ Upstream commit 5b24ac2dfd3eb3e36f794af3aa7f2828b19035bd ]
Size of the 'expect' array in the __report_matches is 1536 bytes, which
is exactly the default frame size warning limit of the xtensa
architecture.
As a result allmodconfig xtensa kernel builds with the gcc that does not
support the compiler plugins (which otherwise would push the said
warning limit to 2K) fail with the following message:
kernel/kcsan/kcsan_test.c:257:1: error: the frame size of 1680 bytes
is larger than 1536 bytes
Fix it by dynamically allocating the 'expect' array.
Signed-off-by: Max Filippov <[email protected]>
Reviewed-by: Marco Elver <[email protected]>
Tested-by: Marco Elver <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/kcsan/kcsan_test.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/kernel/kcsan/kcsan_test.c b/kernel/kcsan/kcsan_test.c
index dc55fd5a36fc..8b176aeab91b 100644
--- a/kernel/kcsan/kcsan_test.c
+++ b/kernel/kcsan/kcsan_test.c
@@ -151,7 +151,7 @@ static bool report_matches(const struct expect_report *r)
const bool is_assert = (r->access[0].type | r->access[1].type) & KCSAN_ACCESS_ASSERT;
bool ret = false;
unsigned long flags;
- typeof(observed.lines) expect;
+ typeof(*observed.lines) *expect;
const char *end;
char *cur;
int i;
@@ -160,6 +160,10 @@ static bool report_matches(const struct expect_report *r)
if (!report_available())
return false;
+ expect = kmalloc(sizeof(observed.lines), GFP_KERNEL);
+ if (WARN_ON(!expect))
+ return false;
+
/* Generate expected report contents. */
/* Title */
@@ -243,6 +247,7 @@ static bool report_matches(const struct expect_report *r)
strstr(observed.lines[2], expect[1])));
out:
spin_unlock_irqrestore(&observed.lock, flags);
+ kfree(expect);
return ret;
}
--
2.35.1
From: Michael Klein <[email protected]>
[ Upstream commit 36c2b9d6710427f802494ba070621cb415198293 ]
Add touchscreen info for the CSL Panther Tab HD.
Signed-off-by: Michael Klein <[email protected]>
Link: https://lore.kernel.org/r/20221220121103.uiwn5l7fii2iggct@LLGMVZLB-0037
Reviewed-by: Hans de Goede <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/platform/x86/touchscreen_dmi.c | 25 +++++++++++++++++++++++++
1 file changed, 25 insertions(+)
diff --git a/drivers/platform/x86/touchscreen_dmi.c b/drivers/platform/x86/touchscreen_dmi.c
index 3d0790263fa7..93671037fd59 100644
--- a/drivers/platform/x86/touchscreen_dmi.c
+++ b/drivers/platform/x86/touchscreen_dmi.c
@@ -255,6 +255,23 @@ static const struct ts_dmi_data connect_tablet9_data = {
.properties = connect_tablet9_props,
};
+static const struct property_entry csl_panther_tab_hd_props[] = {
+ PROPERTY_ENTRY_U32("touchscreen-min-x", 1),
+ PROPERTY_ENTRY_U32("touchscreen-min-y", 20),
+ PROPERTY_ENTRY_U32("touchscreen-size-x", 1980),
+ PROPERTY_ENTRY_U32("touchscreen-size-y", 1526),
+ PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"),
+ PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"),
+ PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-csl-panther-tab-hd.fw"),
+ PROPERTY_ENTRY_U32("silead,max-fingers", 10),
+ { }
+};
+
+static const struct ts_dmi_data csl_panther_tab_hd_data = {
+ .acpi_name = "MSSL1680:00",
+ .properties = csl_panther_tab_hd_props,
+};
+
static const struct property_entry cube_iwork8_air_props[] = {
PROPERTY_ENTRY_U32("touchscreen-min-x", 1),
PROPERTY_ENTRY_U32("touchscreen-min-y", 3),
@@ -1100,6 +1117,14 @@ const struct dmi_system_id touchscreen_dmi_table[] = {
DMI_MATCH(DMI_PRODUCT_NAME, "Tablet 9"),
},
},
+ {
+ /* CSL Panther Tab HD */
+ .driver_data = (void *)&csl_panther_tab_hd_data,
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "CSL Computer GmbH & Co. KG"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "CSL Panther Tab HD"),
+ },
+ },
{
/* CUBE iwork8 Air */
.driver_data = (void *)&cube_iwork8_air_data,
--
2.35.1
From: Kan Liang <[email protected]>
[ Upstream commit 69ced4160969025821f2999ff92163ed26568f1c ]
The same as Sapphire Rapids, the SMI_COUNT MSR is also supported on
Emerald Rapids. Add Emerald Rapids model.
Signed-off-by: Kan Liang <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/events/msr.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/x86/events/msr.c b/arch/x86/events/msr.c
index 96c775abe31f..d23b5523cdd3 100644
--- a/arch/x86/events/msr.c
+++ b/arch/x86/events/msr.c
@@ -69,6 +69,7 @@ static bool test_intel(int idx, void *data)
case INTEL_FAM6_BROADWELL_G:
case INTEL_FAM6_BROADWELL_X:
case INTEL_FAM6_SAPPHIRERAPIDS_X:
+ case INTEL_FAM6_EMERALDRAPIDS_X:
case INTEL_FAM6_ATOM_SILVERMONT:
case INTEL_FAM6_ATOM_SILVERMONT_D:
--
2.35.1
From: Patrick Thompson <[email protected]>
[ Upstream commit 0688773f0710528e1ab302c3d6317e269f2e2e6e ]
Panel is 800x1280 but mounted on a detachable form factor sideways.
Signed-off-by: Patrick Thompson <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/drm_panel_orientation_quirks.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/gpu/drm/drm_panel_orientation_quirks.c b/drivers/gpu/drm/drm_panel_orientation_quirks.c
index ca0fefeaab20..ce739ba45c55 100644
--- a/drivers/gpu/drm/drm_panel_orientation_quirks.c
+++ b/drivers/gpu/drm/drm_panel_orientation_quirks.c
@@ -272,6 +272,12 @@ static const struct dmi_system_id orientation_data[] = {
DMI_EXACT_MATCH(DMI_PRODUCT_VERSION, "Lenovo ideapad D330-10IGM"),
},
.driver_data = (void *)&lcd1200x1920_rightside_up,
+ }, { /* Lenovo Ideapad D330-10IGL (HD) */
+ .matches = {
+ DMI_EXACT_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_EXACT_MATCH(DMI_PRODUCT_VERSION, "Lenovo ideapad D330-10IGL"),
+ },
+ .driver_data = (void *)&lcd800x1280_rightside_up,
}, { /* Lenovo Yoga Book X90F / X91F / X91L */
.matches = {
/* Non exact match to match all versions */
--
2.35.1
From: Chancel Liu <[email protected]>
[ Upstream commit cdfa92eb90f5770b26a79824ef213ebdbbd988b1 ]
The parameter "max" of SOC_SINGLE_SX_TLV() means the number of steps
rather than maximum value. This patch corrects the minimum value to -8
and the number of steps to 15.
Signed-off-by: Chancel Liu <[email protected]>
Acked-by: Shengjiu Wang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/fsl/fsl_micfil.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/sound/soc/fsl/fsl_micfil.c b/sound/soc/fsl/fsl_micfil.c
index d1cd104f8584..38d4d1b7cfe3 100644
--- a/sound/soc/fsl/fsl_micfil.c
+++ b/sound/soc/fsl/fsl_micfil.c
@@ -88,21 +88,21 @@ static DECLARE_TLV_DB_SCALE(gain_tlv, 0, 100, 0);
static const struct snd_kcontrol_new fsl_micfil_snd_controls[] = {
SOC_SINGLE_SX_TLV("CH0 Volume", REG_MICFIL_OUT_CTRL,
- MICFIL_OUTGAIN_CHX_SHIFT(0), 0xF, 0x7, gain_tlv),
+ MICFIL_OUTGAIN_CHX_SHIFT(0), 0x8, 0xF, gain_tlv),
SOC_SINGLE_SX_TLV("CH1 Volume", REG_MICFIL_OUT_CTRL,
- MICFIL_OUTGAIN_CHX_SHIFT(1), 0xF, 0x7, gain_tlv),
+ MICFIL_OUTGAIN_CHX_SHIFT(1), 0x8, 0xF, gain_tlv),
SOC_SINGLE_SX_TLV("CH2 Volume", REG_MICFIL_OUT_CTRL,
- MICFIL_OUTGAIN_CHX_SHIFT(2), 0xF, 0x7, gain_tlv),
+ MICFIL_OUTGAIN_CHX_SHIFT(2), 0x8, 0xF, gain_tlv),
SOC_SINGLE_SX_TLV("CH3 Volume", REG_MICFIL_OUT_CTRL,
- MICFIL_OUTGAIN_CHX_SHIFT(3), 0xF, 0x7, gain_tlv),
+ MICFIL_OUTGAIN_CHX_SHIFT(3), 0x8, 0xF, gain_tlv),
SOC_SINGLE_SX_TLV("CH4 Volume", REG_MICFIL_OUT_CTRL,
- MICFIL_OUTGAIN_CHX_SHIFT(4), 0xF, 0x7, gain_tlv),
+ MICFIL_OUTGAIN_CHX_SHIFT(4), 0x8, 0xF, gain_tlv),
SOC_SINGLE_SX_TLV("CH5 Volume", REG_MICFIL_OUT_CTRL,
- MICFIL_OUTGAIN_CHX_SHIFT(5), 0xF, 0x7, gain_tlv),
+ MICFIL_OUTGAIN_CHX_SHIFT(5), 0x8, 0xF, gain_tlv),
SOC_SINGLE_SX_TLV("CH6 Volume", REG_MICFIL_OUT_CTRL,
- MICFIL_OUTGAIN_CHX_SHIFT(6), 0xF, 0x7, gain_tlv),
+ MICFIL_OUTGAIN_CHX_SHIFT(6), 0x8, 0xF, gain_tlv),
SOC_SINGLE_SX_TLV("CH7 Volume", REG_MICFIL_OUT_CTRL,
- MICFIL_OUTGAIN_CHX_SHIFT(7), 0xF, 0x7, gain_tlv),
+ MICFIL_OUTGAIN_CHX_SHIFT(7), 0x8, 0xF, gain_tlv),
SOC_ENUM_EXT("MICFIL Quality Select",
fsl_micfil_quality_enum,
snd_soc_get_enum_double, snd_soc_put_enum_double),
--
2.35.1
From: Kees Cook <[email protected]>
[ Upstream commit 3b293487b8752cc42c1cbf8a0447bc6076c075fa ]
The memcpy() of the data following a coreboot_table_entry couldn't
be evaluated by the compiler under CONFIG_FORTIFY_SOURCE. To make it
easier to reason about, add an explicit flexible array member to struct
coreboot_device so the entire entry can be copied at once. Additionally,
validate the sizes before copying. Avoids this run-time false positive
warning:
memcpy: detected field-spanning write (size 168) of single field "&device->entry" at drivers/firmware/google/coreboot_table.c:103 (size 8)
Reported-by: Paul Menzel <[email protected]>
Link: https://lore.kernel.org/all/[email protected]/
Cc: Jack Rosenthal <[email protected]>
Cc: Guenter Roeck <[email protected]>
Cc: Julius Werner <[email protected]>
Cc: Brian Norris <[email protected]>
Cc: Stephen Boyd <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
Reviewed-by: Julius Werner <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Stephen Boyd <[email protected]>
Reviewed-by: Jack Rosenthal <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/firmware/google/coreboot_table.c | 9 +++++++--
drivers/firmware/google/coreboot_table.h | 1 +
2 files changed, 8 insertions(+), 2 deletions(-)
diff --git a/drivers/firmware/google/coreboot_table.c b/drivers/firmware/google/coreboot_table.c
index 9ca21feb9d45..f3694d347801 100644
--- a/drivers/firmware/google/coreboot_table.c
+++ b/drivers/firmware/google/coreboot_table.c
@@ -93,7 +93,12 @@ static int coreboot_table_populate(struct device *dev, void *ptr)
for (i = 0; i < header->table_entries; i++) {
entry = ptr_entry;
- device = kzalloc(sizeof(struct device) + entry->size, GFP_KERNEL);
+ if (entry->size < sizeof(*entry)) {
+ dev_warn(dev, "coreboot table entry too small!\n");
+ return -EINVAL;
+ }
+
+ device = kzalloc(sizeof(device->dev) + entry->size, GFP_KERNEL);
if (!device)
return -ENOMEM;
@@ -101,7 +106,7 @@ static int coreboot_table_populate(struct device *dev, void *ptr)
device->dev.parent = dev;
device->dev.bus = &coreboot_bus_type;
device->dev.release = coreboot_device_release;
- memcpy(&device->entry, ptr_entry, entry->size);
+ memcpy(device->raw, ptr_entry, entry->size);
ret = device_register(&device->dev);
if (ret) {
diff --git a/drivers/firmware/google/coreboot_table.h b/drivers/firmware/google/coreboot_table.h
index beb778674acd..4a89277b99a3 100644
--- a/drivers/firmware/google/coreboot_table.h
+++ b/drivers/firmware/google/coreboot_table.h
@@ -66,6 +66,7 @@ struct coreboot_device {
struct coreboot_table_entry entry;
struct lb_cbmem_ref cbmem_ref;
struct lb_framebuffer framebuffer;
+ DECLARE_FLEX_ARRAY(u8, raw);
};
};
--
2.35.1
From: Hui Wang <[email protected]>
[ Upstream commit eea8ce81fbb544e3caad1a1c876ba1af467b3d3c ]
This modem has 7 interfaces, 5 of them are serial interfaces and are
driven by cdc_acm, while 2 of them are wwan interfaces and are driven
by cdc_ether:
If 0: Abstract (modem)
If 1: Abstract (modem)
If 2: Abstract (modem)
If 3: Abstract (modem)
If 4: Abstract (modem)
If 5: Ethernet Networking
If 6: Ethernet Networking
Without this change, the 2 network interfaces will be named to usb0
and usb1, our QA think the names are confusing and filed a bug on it.
After applying this change, the name will be wwan0 and wwan1, and
they could work well with modem manager.
Signed-off-by: Hui Wang <[email protected]>
Reviewed-by: Jiri Pirko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/usb/cdc_ether.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/net/usb/cdc_ether.c b/drivers/net/usb/cdc_ether.c
index c6b0de1b752f..3497b5a286ea 100644
--- a/drivers/net/usb/cdc_ether.c
+++ b/drivers/net/usb/cdc_ether.c
@@ -1000,6 +1000,12 @@ static const struct usb_device_id products[] = {
USB_CDC_SUBCLASS_ETHERNET,
USB_CDC_PROTO_NONE),
.driver_info = (unsigned long)&wwan_info,
+}, {
+ /* Cinterion PLS62-W modem by GEMALTO/THALES */
+ USB_DEVICE_AND_INTERFACE_INFO(0x1e2d, 0x005b, USB_CLASS_COMM,
+ USB_CDC_SUBCLASS_ETHERNET,
+ USB_CDC_PROTO_NONE),
+ .driver_info = (unsigned long)&wwan_info,
}, {
/* Cinterion PLS83/PLS63 modem by GEMALTO/THALES */
USB_DEVICE_AND_INTERFACE_INFO(0x1e2d, 0x0069, USB_CLASS_COMM,
--
2.35.1
From: Bartosz Golaszewski <[email protected]>
[ Upstream commit 6b35b173dbc1711f8d272e3f322d2ad697015919 ]
The two debug messages in spidev_open() dereference spidev->spi without
taking the lock and without checking if it's not null. This can lead to
a crash. Drop the messages as they're not needed - the user-space will
get informed about ENOMEM with the syscall return value.
Signed-off-by: Bartosz Golaszewski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/spi/spidev.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c
index 2cfbf840410a..6e978dad72dc 100644
--- a/drivers/spi/spidev.c
+++ b/drivers/spi/spidev.c
@@ -594,7 +594,6 @@ static int spidev_open(struct inode *inode, struct file *filp)
if (!spidev->tx_buffer) {
spidev->tx_buffer = kmalloc(bufsiz, GFP_KERNEL);
if (!spidev->tx_buffer) {
- dev_dbg(&spidev->spi->dev, "open/ENOMEM\n");
status = -ENOMEM;
goto err_find_dev;
}
@@ -603,7 +602,6 @@ static int spidev_open(struct inode *inode, struct file *filp)
if (!spidev->rx_buffer) {
spidev->rx_buffer = kmalloc(bufsiz, GFP_KERNEL);
if (!spidev->rx_buffer) {
- dev_dbg(&spidev->spi->dev, "open/ENOMEM\n");
status = -ENOMEM;
goto err_alloc_rx_buf;
}
--
2.35.1
From: Sumit Gupta <[email protected]>
[ Upstream commit 01c5bb0cc2a39fbc56ff9a5ef28b79447f0c2351 ]
Tegra234 platform uses the tegra194-cpufreq driver, so add it
to the blocklist in cpufreq-dt-platdev driver to avoid the cpufreq
driver registration from there.
Signed-off-by: Sumit Gupta <[email protected]>
Signed-off-by: Viresh Kumar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/cpufreq/cpufreq-dt-platdev.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c b/drivers/cpufreq/cpufreq-dt-platdev.c
index ca1d103ec449..27a3b8800a35 100644
--- a/drivers/cpufreq/cpufreq-dt-platdev.c
+++ b/drivers/cpufreq/cpufreq-dt-platdev.c
@@ -133,6 +133,7 @@ static const struct of_device_id blocklist[] __initconst = {
{ .compatible = "nvidia,tegra30", },
{ .compatible = "nvidia,tegra124", },
{ .compatible = "nvidia,tegra210", },
+ { .compatible = "nvidia,tegra234", },
{ .compatible = "qcom,apq8096", },
{ .compatible = "qcom,msm8996", },
--
2.35.1
From: Konrad Dybcio <[email protected]>
[ Upstream commit faf28e240dd118d9521c68aeb9388b9b8f02d9d0 ]
The Qualcomm SM6375 platform uses the qcom-cpufreq-hw driver, so add
it to the cpufreq-dt-platdev driver's blocklist.
Signed-off-by: Konrad Dybcio <[email protected]>
Signed-off-by: Viresh Kumar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/cpufreq/cpufreq-dt-platdev.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c b/drivers/cpufreq/cpufreq-dt-platdev.c
index 27a3b8800a35..e1b5975c7daa 100644
--- a/drivers/cpufreq/cpufreq-dt-platdev.c
+++ b/drivers/cpufreq/cpufreq-dt-platdev.c
@@ -144,6 +144,7 @@ static const struct of_device_id blocklist[] __initconst = {
{ .compatible = "qcom,sc8180x", },
{ .compatible = "qcom,sdm845", },
{ .compatible = "qcom,sm6350", },
+ { .compatible = "qcom,sm6375", },
{ .compatible = "qcom,sm8150", },
{ .compatible = "qcom,sm8250", },
{ .compatible = "qcom,sm8350", },
--
2.35.1
From: Kan Liang <[email protected]>
[ Upstream commit 5268a2842066c227e6ccd94bac562f1e1000244f ]
From the perspective of the uncore PMU, the new Emerald Rapids is the
same as the Sapphire Rapids. The only difference is the event list,
which will be supported in the perf tool later.
Signed-off-by: Kan Liang <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/events/intel/uncore.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/x86/events/intel/uncore.c b/arch/x86/events/intel/uncore.c
index c72e368dd164..7e16c590f259 100644
--- a/arch/x86/events/intel/uncore.c
+++ b/arch/x86/events/intel/uncore.c
@@ -1829,6 +1829,7 @@ static const struct x86_cpu_id intel_uncore_match[] __initconst = {
X86_MATCH_INTEL_FAM6_MODEL(ALDERLAKE, &adl_uncore_init),
X86_MATCH_INTEL_FAM6_MODEL(ALDERLAKE_L, &adl_uncore_init),
X86_MATCH_INTEL_FAM6_MODEL(SAPPHIRERAPIDS_X, &spr_uncore_init),
+ X86_MATCH_INTEL_FAM6_MODEL(EMERALDRAPIDS_X, &spr_uncore_init),
X86_MATCH_INTEL_FAM6_MODEL(ATOM_TREMONT_D, &snr_uncore_init),
{},
};
--
2.35.1
From: Andre Przywara <[email protected]>
[ Upstream commit be53771c87f4e322a9835d3faa9cd73a4ecdec5b ]
The Microsoft Devkit 2023 is a an ARM64 based machine featuring a
Realtek 8153 USB3.0-to-GBit Ethernet adapter. As in their other
machines, Microsoft uses a custom USB device ID.
Add the respective ID values to the driver. This makes Ethernet work on
the MS Devkit device. The chip has been visually confirmed to be a
RTL8153.
Signed-off-by: Andre Przywara <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/usb/r8152.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 109c288d8b47..cf6941b1d280 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -9809,6 +9809,7 @@ static const struct usb_device_id rtl8152_table[] = {
REALTEK_USB_DEVICE(VENDOR_ID_MICROSOFT, 0x07ab),
REALTEK_USB_DEVICE(VENDOR_ID_MICROSOFT, 0x07c6),
REALTEK_USB_DEVICE(VENDOR_ID_MICROSOFT, 0x0927),
+ REALTEK_USB_DEVICE(VENDOR_ID_MICROSOFT, 0x0c5e),
REALTEK_USB_DEVICE(VENDOR_ID_SAMSUNG, 0xa101),
REALTEK_USB_DEVICE(VENDOR_ID_LENOVO, 0x304f),
REALTEK_USB_DEVICE(VENDOR_ID_LENOVO, 0x3054),
--
2.35.1
From: Hans de Goede <[email protected]>
[ Upstream commit db9494895b405bf318dc7e563dee6daa51b3b6ed ]
The 0x33 keycode is emitted by Fn + F6 on a ASUS FX705GE laptop.
Reported-by: Nemcev Aleksey <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/platform/x86/asus-nb-wmi.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/platform/x86/asus-nb-wmi.c b/drivers/platform/x86/asus-nb-wmi.c
index a81dc4b191b7..4d7327b67a7d 100644
--- a/drivers/platform/x86/asus-nb-wmi.c
+++ b/drivers/platform/x86/asus-nb-wmi.c
@@ -521,6 +521,7 @@ static const struct key_entry asus_nb_wmi_keymap[] = {
{ KE_KEY, 0x30, { KEY_VOLUMEUP } },
{ KE_KEY, 0x31, { KEY_VOLUMEDOWN } },
{ KE_KEY, 0x32, { KEY_MUTE } },
+ { KE_KEY, 0x33, { KEY_SCREENLOCK } },
{ KE_KEY, 0x35, { KEY_SCREENLOCK } },
{ KE_KEY, 0x40, { KEY_PREVIOUSSONG } },
{ KE_KEY, 0x41, { KEY_NEXTSONG } },
--
2.35.1
From: Will Deacon <[email protected]>
[ Upstream commit 4e4ff23a35ee3a145fbc8378ecfeaab2d235cddd ]
With only two levels of page-table, the generic 'pud_*' macros are
implemented using dummy operations in pgtable-nopmd.h. Since commit
730a11f982e6 ("arm64/mm: add pud_user_exec() check in
pud_user_accessible_page()"), pud_user_accessible_page() unconditionally
calls pud_user_exec(), which is an arm64-specific helper and therefore
isn't defined by pgtable-nopmd.h. This results in a build failure for
configurations with only two levels of page table:
arch/arm64/include/asm/pgtable.h: In function 'pud_user_accessible_page':
>> arch/arm64/include/asm/pgtable.h:870:51: error: implicit declaration of function 'pud_user_exec'; did you mean 'pmd_user_exec'? [-Werror=implicit-function-declaration]
870 | return pud_leaf(pud) && (pud_user(pud) || pud_user_exec(pud));
| ^~~~~~~~~~~~~
| pmd_user_exec
Fix the problem by defining pud_user_exec() as pud_user() in this case.
Link: https://lore.kernel.org/r/[email protected]
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/include/asm/pgtable.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm64/include/asm/pgtable.h b/arch/arm64/include/asm/pgtable.h
index ed57717cd004..cabbc03533b7 100644
--- a/arch/arm64/include/asm/pgtable.h
+++ b/arch/arm64/include/asm/pgtable.h
@@ -675,6 +675,7 @@ static inline pmd_t *pud_pgtable(pud_t pud)
#else
#define pud_page_paddr(pud) ({ BUILD_BUG(); 0; })
+#define pud_user_exec(pud) pud_user(pud) /* Always 0 with folding */
/* Match pmd_offset folding in <asm/generic/pgtable-nopmd.h> */
#define pmd_set_fixmap(addr) NULL
--
2.35.1
From: Bartosz Golaszewski <[email protected]>
[ Upstream commit a720416d94634068951773cb9e9d6f1b73769e5b ]
There's a spinlock in place that is taken in file_operations callbacks
whenever we check if spidev->spi is still alive (not null). It's also
taken when spidev->spi is set to NULL in remove().
This however doesn't protect the code against driver unbind event while
one of the syscalls is still in progress. To that end we need a lock taken
continuously as long as we may still access spidev->spi. As both the file
ops and the remove callback are never called from interrupt context, we
can replace the spinlock with a mutex.
Signed-off-by: Bartosz Golaszewski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/spi/spidev.c | 34 ++++++++++++++++++----------------
1 file changed, 18 insertions(+), 16 deletions(-)
diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c
index d233e2424ad1..2cfbf840410a 100644
--- a/drivers/spi/spidev.c
+++ b/drivers/spi/spidev.c
@@ -67,7 +67,7 @@ static DECLARE_BITMAP(minors, N_SPI_MINORS);
struct spidev_data {
dev_t devt;
- spinlock_t spi_lock;
+ struct mutex spi_lock;
struct spi_device *spi;
struct list_head device_entry;
@@ -94,9 +94,8 @@ spidev_sync(struct spidev_data *spidev, struct spi_message *message)
int status;
struct spi_device *spi;
- spin_lock_irq(&spidev->spi_lock);
+ mutex_lock(&spidev->spi_lock);
spi = spidev->spi;
- spin_unlock_irq(&spidev->spi_lock);
if (spi == NULL)
status = -ESHUTDOWN;
@@ -106,6 +105,7 @@ spidev_sync(struct spidev_data *spidev, struct spi_message *message)
if (status == 0)
status = message->actual_length;
+ mutex_unlock(&spidev->spi_lock);
return status;
}
@@ -358,12 +358,12 @@ spidev_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
* we issue this ioctl.
*/
spidev = filp->private_data;
- spin_lock_irq(&spidev->spi_lock);
+ mutex_lock(&spidev->spi_lock);
spi = spi_dev_get(spidev->spi);
- spin_unlock_irq(&spidev->spi_lock);
-
- if (spi == NULL)
+ if (spi == NULL) {
+ mutex_unlock(&spidev->spi_lock);
return -ESHUTDOWN;
+ }
/* use the buffer lock here for triple duty:
* - prevent I/O (from us) so calling spi_setup() is safe;
@@ -500,6 +500,7 @@ spidev_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
mutex_unlock(&spidev->buf_lock);
spi_dev_put(spi);
+ mutex_unlock(&spidev->spi_lock);
return retval;
}
@@ -521,12 +522,12 @@ spidev_compat_ioc_message(struct file *filp, unsigned int cmd,
* we issue this ioctl.
*/
spidev = filp->private_data;
- spin_lock_irq(&spidev->spi_lock);
+ mutex_lock(&spidev->spi_lock);
spi = spi_dev_get(spidev->spi);
- spin_unlock_irq(&spidev->spi_lock);
-
- if (spi == NULL)
+ if (spi == NULL) {
+ mutex_unlock(&spidev->spi_lock);
return -ESHUTDOWN;
+ }
/* SPI_IOC_MESSAGE needs the buffer locked "normally" */
mutex_lock(&spidev->buf_lock);
@@ -553,6 +554,7 @@ spidev_compat_ioc_message(struct file *filp, unsigned int cmd,
done:
mutex_unlock(&spidev->buf_lock);
spi_dev_put(spi);
+ mutex_unlock(&spidev->spi_lock);
return retval;
}
@@ -631,10 +633,10 @@ static int spidev_release(struct inode *inode, struct file *filp)
spidev = filp->private_data;
filp->private_data = NULL;
- spin_lock_irq(&spidev->spi_lock);
+ mutex_lock(&spidev->spi_lock);
/* ... after we unbound from the underlying device? */
dofree = (spidev->spi == NULL);
- spin_unlock_irq(&spidev->spi_lock);
+ mutex_unlock(&spidev->spi_lock);
/* last close? */
spidev->users--;
@@ -775,7 +777,7 @@ static int spidev_probe(struct spi_device *spi)
/* Initialize the driver data */
spidev->spi = spi;
- spin_lock_init(&spidev->spi_lock);
+ mutex_init(&spidev->spi_lock);
mutex_init(&spidev->buf_lock);
INIT_LIST_HEAD(&spidev->device_entry);
@@ -820,9 +822,9 @@ static int spidev_remove(struct spi_device *spi)
/* prevent new opens */
mutex_lock(&device_list_lock);
/* make sure ops on existing fds can abort cleanly */
- spin_lock_irq(&spidev->spi_lock);
+ mutex_lock(&spidev->spi_lock);
spidev->spi = NULL;
- spin_unlock_irq(&spidev->spi_lock);
+ mutex_unlock(&spidev->spi_lock);
list_del(&spidev->device_entry);
device_destroy(spidev_class, spidev->devt);
--
2.35.1
From: Alexander Gordeev <[email protected]>
[ Upstream commit 45d619bdaf799196d702a9ae464b07066d6db2f9 ]
Symbols _edata and _end in the linker script are the
only unaligned expicitly on page boundary. Although
_end is aligned implicitly by BSS_SECTION macro that
is still inconsistent and could lead to a bug if a tool
or function would assume that _edata is as aligned as
others.
For example, vmem_map_init() function does not align
symbols _etext, _einittext etc. Should these symbols
be unaligned as well, the size of ranges to update
were short on one page.
Instead of fixing every occurrence of this kind in the
code and external tools just force the alignment on
these two symbols.
Reviewed-by: Heiko Carstens <[email protected]>
Signed-off-by: Alexander Gordeev <[email protected]>
Signed-off-by: Heiko Carstens <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/s390/kernel/vmlinux.lds.S | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/s390/kernel/vmlinux.lds.S b/arch/s390/kernel/vmlinux.lds.S
index b508ccad4856..8ce1615c1046 100644
--- a/arch/s390/kernel/vmlinux.lds.S
+++ b/arch/s390/kernel/vmlinux.lds.S
@@ -80,6 +80,7 @@ SECTIONS
_end_amode31_refs = .;
}
+ . = ALIGN(PAGE_SIZE);
_edata = .; /* End of data section */
/* will be freed after init */
@@ -194,6 +195,7 @@ SECTIONS
BSS_SECTION(PAGE_SIZE, 4 * PAGE_SIZE, PAGE_SIZE)
+ . = ALIGN(PAGE_SIZE);
_end = . ;
/*
--
2.35.1
From: Niklas Schnelle <[email protected]>
[ Upstream commit 0d4d52361b6c29bf771acd4fa461f06d78fb2fac ]
Using DEBUG_H without a prefix is very generic and inconsistent with
other header guards in arch/s390/include/asm. In fact it collides with
the same name in the ath9k wireless driver though that depends on !S390
via disabled wireless support. Let's just use a consistent header guard
name and prevent possible future trouble.
Signed-off-by: Niklas Schnelle <[email protected]>
Signed-off-by: Heiko Carstens <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/s390/include/asm/debug.h | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/s390/include/asm/debug.h b/arch/s390/include/asm/debug.h
index 19a55e1e3a0c..5fc91a90657e 100644
--- a/arch/s390/include/asm/debug.h
+++ b/arch/s390/include/asm/debug.h
@@ -4,8 +4,8 @@
*
* Copyright IBM Corp. 1999, 2020
*/
-#ifndef DEBUG_H
-#define DEBUG_H
+#ifndef _ASM_S390_DEBUG_H
+#define _ASM_S390_DEBUG_H
#include <linux/string.h>
#include <linux/spinlock.h>
@@ -487,4 +487,4 @@ void debug_register_static(debug_info_t *id, int pages_per_area, int nr_areas);
#endif /* MODULE */
-#endif /* DEBUG_H */
+#endif /* _ASM_S390_DEBUG_H */
--
2.35.1
From: Yihang Li <[email protected]>
[ Upstream commit f58c89700630da6554b24fd3df293a24874c10c1 ]
Currently the driver sets the port invalid if one phy in the port is not
enabled, which may cause issues in expander situation. In directly attached
situation, if phy up doesn't occur in time when refreshing port id, the
port is incorrectly set to invalid which will also cause disk lost.
Therefore set a port invalid only if there are no devices attached to the
port.
Signed-off-by: Yihang Li <[email protected]>
Signed-off-by: Xiang Chen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/hisi_sas/hisi_sas_main.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 9515c45affa5..7d93783c09a5 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -1414,7 +1414,7 @@ static void hisi_sas_refresh_port_id(struct hisi_hba *hisi_hba)
device->linkrate = phy->sas_phy.linkrate;
hisi_hba->hw->setup_itct(hisi_hba, sas_dev);
- } else
+ } else if (!port->port_attached)
port->id = 0xff;
}
}
--
2.35.1
From: Mark Brown <[email protected]>
[ Upstream commit 8c6a42b5b0ed6f96624f56954e93eeae107440a6 ]
The SSI driver calls the AC'97 playback and transmit streams "AC97 Playback"
and "AC97 Capture" respectively. This is the same name used by the generic
AC'97 CODEC driver in ASoC, creating confusion for the Freescale ASoC card
when it attempts to use these widgets in routing. Add a "CPU" in the name
like the regular DAIs registered by the driver to disambiguate.
Acked-by: Shengjiu Wang <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/fsl/fsl-asoc-card.c | 8 ++++----
sound/soc/fsl/fsl_ssi.c | 4 ++--
2 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/sound/soc/fsl/fsl-asoc-card.c b/sound/soc/fsl/fsl-asoc-card.c
index c72a156737e6..978496c2fc09 100644
--- a/sound/soc/fsl/fsl-asoc-card.c
+++ b/sound/soc/fsl/fsl-asoc-card.c
@@ -120,11 +120,11 @@ static const struct snd_soc_dapm_route audio_map[] = {
static const struct snd_soc_dapm_route audio_map_ac97[] = {
/* 1st half -- Normal DAPM routes */
- {"Playback", NULL, "AC97 Playback"},
- {"AC97 Capture", NULL, "Capture"},
+ {"Playback", NULL, "CPU AC97 Playback"},
+ {"CPU AC97 Capture", NULL, "Capture"},
/* 2nd half -- ASRC DAPM routes */
- {"AC97 Playback", NULL, "ASRC-Playback"},
- {"ASRC-Capture", NULL, "AC97 Capture"},
+ {"CPU AC97 Playback", NULL, "ASRC-Playback"},
+ {"ASRC-Capture", NULL, "CPU AC97 Capture"},
};
static const struct snd_soc_dapm_route audio_map_tx[] = {
diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c
index ecbc1c365d5b..0c73c2e9dce0 100644
--- a/sound/soc/fsl/fsl_ssi.c
+++ b/sound/soc/fsl/fsl_ssi.c
@@ -1160,14 +1160,14 @@ static struct snd_soc_dai_driver fsl_ssi_ac97_dai = {
.symmetric_channels = 1,
.probe = fsl_ssi_dai_probe,
.playback = {
- .stream_name = "AC97 Playback",
+ .stream_name = "CPU AC97 Playback",
.channels_min = 2,
.channels_max = 2,
.rates = SNDRV_PCM_RATE_8000_48000,
.formats = SNDRV_PCM_FMTBIT_S16 | SNDRV_PCM_FMTBIT_S20,
},
.capture = {
- .stream_name = "AC97 Capture",
+ .stream_name = "CPU AC97 Capture",
.channels_min = 2,
.channels_max = 2,
.rates = SNDRV_PCM_RATE_48000,
--
2.35.1
From: Mateusz Guzik <[email protected]>
[ Upstream commit f5fe24ef17b5fbe6db49534163e77499fb10ae8c ]
On the x86-64 architecture even a failing cmpxchg grants exclusive
access to the cacheline, making it preferable to retry the failed op
immediately instead of stalling with the pause instruction.
To illustrate the impact, below are benchmark results obtained by
running various will-it-scale tests on top of the 6.2-rc3 kernel and
Cascade Lake (2 sockets * 24 cores * 2 threads) CPU.
All results in ops/s. Note there is some variance in re-runs, but the
code is consistently faster when contention is present.
open3 ("Same file open/close"):
proc stock no-pause
1 805603 814942 (+%1)
2 1054980 1054781 (-0%)
8 1544802 1822858 (+18%)
24 1191064 2199665 (+84%)
48 851582 1469860 (+72%)
96 609481 1427170 (+134%)
fstat2 ("Same file fstat"):
proc stock no-pause
1 3013872 3047636 (+1%)
2 4284687 4400421 (+2%)
8 3257721 5530156 (+69%)
24 2239819 5466127 (+144%)
48 1701072 5256609 (+209%)
96 1269157 6649326 (+423%)
Additionally, a kernel with a private patch to help access() scalability:
access2 ("Same file access"):
proc stock patched patched
+nopause
24 2378041 2005501 5370335 (-15% / +125%)
That is, fixing the problems in access itself *reduces* scalability
after the cacheline ping-pong only happens in lockref with the pause
instruction.
Note that fstat and access benchmarks are not currently integrated into
will-it-scale, but interested parties can find them in pull requests to
said project.
Code at hand has a rather tortured history. First modification showed
up in commit d472d9d98b46 ("lockref: Relax in cmpxchg loop"), written
with Itanium in mind. Later it got patched up to use an arch-dependent
macro to stop doing it on s390 where it caused a significant regression.
Said macro had undergone revisions and was ultimately eliminated later,
going back to cpu_relax.
While I intended to only remove cpu_relax for x86-64, I got the
following comment from Linus:
I would actually prefer just removing it entirely and see if
somebody else hollers. You have the numbers to prove it hurts on
real hardware, and I don't think we have any numbers to the
contrary.
So I think it's better to trust the numbers and remove it as a
failure, than say "let's just remove it on x86-64 and leave
everybody else with the potentially broken code"
Additionally, Will Deacon (maintainer of the arm64 port, one of the
architectures previously benchmarked):
So, from the arm64 side of the fence, I'm perfectly happy just
removing the cpu_relax() calls from lockref.
As such, come back full circle in history and whack it altogether.
Signed-off-by: Mateusz Guzik <[email protected]>
Link: https://lore.kernel.org/all/CAGudoHHx0Nqg6DE70zAVA75eV-HXfWyhVMWZ-aSeOofkA_=WdA@mail.gmail.com/
Acked-by: Tony Luck <[email protected]> # ia64
Acked-by: Nicholas Piggin <[email protected]> # powerpc
Acked-by: Will Deacon <[email protected]> # arm64
Acked-by: Peter Zijlstra <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
lib/lockref.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/lib/lockref.c b/lib/lockref.c
index 5b34bbd3eba8..81ac5f355242 100644
--- a/lib/lockref.c
+++ b/lib/lockref.c
@@ -24,7 +24,6 @@
} \
if (!--retry) \
break; \
- cpu_relax(); \
} \
} while (0)
--
2.35.1