The 'data-lanes' property belongs in the controller node but was
erroneously moved to the endpoint nodes in the last revision of the
external display series:
[drm] Invalid property "data-lanes", default max DP lanes = 4
Fixes: bc9a747ae91f ("arm64: dts: qcom: sc8280xp-crd: Introduce pmic_glink")
Signed-off-by: Johan Hovold <[email protected]>
---
arch/arm64/boot/dts/qcom/sc8280xp-crd.dts | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
index 0c3bdd3cdb9e..db6eb19d0da7 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
@@ -379,20 +379,22 @@ &mdss0 {
};
&mdss0_dp0 {
+ data-lanes = <0 1>;
+
status = "okay";
};
&mdss0_dp0_out {
- data-lanes = <0 1>;
remote-endpoint = <&pmic_glink_con0_ss>;
};
&mdss0_dp1 {
+ data-lanes = <0 1>;
+
status = "okay";
};
&mdss0_dp1_out {
- data-lanes = <0 1>;
remote-endpoint = <&pmic_glink_con1_ss>;
};
--
2.39.2
On Wed, Feb 15, 2023 at 05:45:23PM +0100, Johan Hovold wrote:
> The 'data-lanes' property belongs in the controller node but was
> erroneously moved to the endpoint nodes in the last revision of the
> external display series:
>
> [drm] Invalid property "data-lanes", default max DP lanes = 4
>
> Fixes: bc9a747ae91f ("arm64: dts: qcom: sc8280xp-crd: Introduce pmic_glink")
> Signed-off-by: Johan Hovold <[email protected]>
> ---
Please disregard these patches which are only needed for 6.2 backports
of the above mentioned series.
Sorry about the noise.
Johan