From: Ross Zwisler <[email protected]>
The canonical location for the tracefs filesystem is at /sys/kernel/tracing.
But, from Documentation/trace/ftrace.rst:
Before 4.1, all ftrace tracing control files were within the debugfs
file system, which is typically located at /sys/kernel/debug/tracing.
For backward compatibility, when mounting the debugfs file system,
the tracefs file system will be automatically mounted at:
/sys/kernel/debug/tracing
Many comments and samples in the bpf code still refer to this older
debugfs path, so let's update them to avoid confusion. There are a few
spots where the bpf code explicitly checks both tracefs and debugfs
(tools/bpf/bpftool/tracelog.c and tools/lib/api/fs/fs.c) and I've left
those alone so that the tools can continue to work with both paths.
Signed-off-by: Ross Zwisler <[email protected]>
Acked-by: Michael S. Tsirkin <[email protected]>
---
v2 was submitted to bpf-next via a pair of pull requests:
https://github.com/kernel-patches/bpf/pull/4672
https://github.com/kernel-patches/bpf/pull/4648
The only change since v2 is that I rebased on the current bpf-next_base.
I've run this through all the BPF selftests on a local machine:
sudo ./test_verifier
sudo make run_tests
and didn't hit any regressions. I've also tested to make sure each
modified selftest runs successfully with each path of tracefs (with and
without debugfs).
---
include/uapi/linux/bpf.h | 8 ++++----
samples/bpf/cpustat_kern.c | 4 ++--
samples/bpf/hbm.c | 4 ++--
samples/bpf/ibumad_kern.c | 4 ++--
samples/bpf/lwt_len_hist.sh | 2 +-
samples/bpf/offwaketime_kern.c | 2 +-
samples/bpf/task_fd_query_user.c | 4 ++--
samples/bpf/test_lwt_bpf.sh | 2 +-
samples/bpf/test_overhead_tp.bpf.c | 4 ++--
tools/include/uapi/linux/bpf.h | 8 ++++----
10 files changed, 21 insertions(+), 21 deletions(-)
diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h
index d8c534e05b0a..13129df937cd 100644
--- a/include/uapi/linux/bpf.h
+++ b/include/uapi/linux/bpf.h
@@ -1647,17 +1647,17 @@ union bpf_attr {
* Description
* This helper is a "printk()-like" facility for debugging. It
* prints a message defined by format *fmt* (of size *fmt_size*)
- * to file *\/sys/kernel/debug/tracing/trace* from DebugFS, if
+ * to file *\/sys/kernel/tracing/trace* from TraceFS, if
* available. It can take up to three additional **u64**
* arguments (as an eBPF helpers, the total number of arguments is
* limited to five).
*
* Each time the helper is called, it appends a line to the trace.
- * Lines are discarded while *\/sys/kernel/debug/tracing/trace* is
- * open, use *\/sys/kernel/debug/tracing/trace_pipe* to avoid this.
+ * Lines are discarded while *\/sys/kernel/tracing/trace* is
+ * open, use *\/sys/kernel/tracing/trace_pipe* to avoid this.
* The format of the trace is customizable, and the exact output
* one will get depends on the options set in
- * *\/sys/kernel/debug/tracing/trace_options* (see also the
+ * *\/sys/kernel/tracing/trace_options* (see also the
* *README* file under the same directory). However, it usually
* defaults to something like:
*
diff --git a/samples/bpf/cpustat_kern.c b/samples/bpf/cpustat_kern.c
index 5aefd19cdfa1..944f13fe164a 100644
--- a/samples/bpf/cpustat_kern.c
+++ b/samples/bpf/cpustat_kern.c
@@ -76,8 +76,8 @@ struct {
/*
* The trace events for cpu_idle and cpu_frequency are taken from:
- * /sys/kernel/debug/tracing/events/power/cpu_idle/format
- * /sys/kernel/debug/tracing/events/power/cpu_frequency/format
+ * /sys/kernel/tracing/events/power/cpu_idle/format
+ * /sys/kernel/tracing/events/power/cpu_frequency/format
*
* These two events have same format, so define one common structure.
*/
diff --git a/samples/bpf/hbm.c b/samples/bpf/hbm.c
index 516fbac28b71..ff58ec43f56a 100644
--- a/samples/bpf/hbm.c
+++ b/samples/bpf/hbm.c
@@ -65,7 +65,7 @@ static void Usage(void);
static void read_trace_pipe2(void);
static void do_error(char *msg, bool errno_flag);
-#define DEBUGFS "/sys/kernel/debug/tracing/"
+#define TRACEFS "/sys/kernel/tracing/"
static struct bpf_program *bpf_prog;
static struct bpf_object *obj;
@@ -77,7 +77,7 @@ static void read_trace_pipe2(void)
FILE *outf;
char *outFname = "hbm_out.log";
- trace_fd = open(DEBUGFS "trace_pipe", O_RDONLY, 0);
+ trace_fd = open(TRACEFS "trace_pipe", O_RDONLY, 0);
if (trace_fd < 0) {
printf("Error opening trace_pipe\n");
return;
diff --git a/samples/bpf/ibumad_kern.c b/samples/bpf/ibumad_kern.c
index 9b193231024a..f07474c72525 100644
--- a/samples/bpf/ibumad_kern.c
+++ b/samples/bpf/ibumad_kern.c
@@ -39,8 +39,8 @@ struct {
/* Taken from the current format defined in
* include/trace/events/ib_umad.h
* and
- * /sys/kernel/debug/tracing/events/ib_umad/ib_umad_read/format
- * /sys/kernel/debug/tracing/events/ib_umad/ib_umad_write/format
+ * /sys/kernel/tracing/events/ib_umad/ib_umad_read/format
+ * /sys/kernel/tracing/events/ib_umad/ib_umad_write/format
*/
struct ib_umad_rw_args {
u64 pad;
diff --git a/samples/bpf/lwt_len_hist.sh b/samples/bpf/lwt_len_hist.sh
index 7078bfcc4f4d..381b2c634784 100755
--- a/samples/bpf/lwt_len_hist.sh
+++ b/samples/bpf/lwt_len_hist.sh
@@ -5,7 +5,7 @@ NS1=lwt_ns1
VETH0=tst_lwt1a
VETH1=tst_lwt1b
BPF_PROG=lwt_len_hist.bpf.o
-TRACE_ROOT=/sys/kernel/debug/tracing
+TRACE_ROOT=/sys/kernel/tracing
function cleanup {
# To reset saved histogram, remove pinned map
diff --git a/samples/bpf/offwaketime_kern.c b/samples/bpf/offwaketime_kern.c
index eb4d94742e6b..23f12b47e9e5 100644
--- a/samples/bpf/offwaketime_kern.c
+++ b/samples/bpf/offwaketime_kern.c
@@ -110,7 +110,7 @@ static inline int update_counts(void *ctx, u32 pid, u64 delta)
}
#if 1
-/* taken from /sys/kernel/debug/tracing/events/sched/sched_switch/format */
+/* taken from /sys/kernel/tracing/events/sched/sched_switch/format */
struct sched_switch_args {
unsigned long long pad;
char prev_comm[TASK_COMM_LEN];
diff --git a/samples/bpf/task_fd_query_user.c b/samples/bpf/task_fd_query_user.c
index a33d74bd3a4b..1e61f2180470 100644
--- a/samples/bpf/task_fd_query_user.c
+++ b/samples/bpf/task_fd_query_user.c
@@ -235,7 +235,7 @@ static int test_debug_fs_uprobe(char *binary_path, long offset, bool is_return)
struct bpf_link *link;
ssize_t bytes;
- snprintf(buf, sizeof(buf), "/sys/kernel/debug/tracing/%s_events",
+ snprintf(buf, sizeof(buf), "/sys/kernel/tracing/%s_events",
event_type);
kfd = open(buf, O_WRONLY | O_TRUNC, 0);
CHECK_PERROR_RET(kfd < 0);
@@ -252,7 +252,7 @@ static int test_debug_fs_uprobe(char *binary_path, long offset, bool is_return)
close(kfd);
kfd = -1;
- snprintf(buf, sizeof(buf), "/sys/kernel/debug/tracing/events/%ss/%s/id",
+ snprintf(buf, sizeof(buf), "/sys/kernel/tracing/events/%ss/%s/id",
event_type, event_alias);
efd = open(buf, O_RDONLY, 0);
CHECK_PERROR_RET(efd < 0);
diff --git a/samples/bpf/test_lwt_bpf.sh b/samples/bpf/test_lwt_bpf.sh
index 2e9f5126963b..0bf2d0f6bf4b 100755
--- a/samples/bpf/test_lwt_bpf.sh
+++ b/samples/bpf/test_lwt_bpf.sh
@@ -21,7 +21,7 @@ IP_LOCAL="192.168.99.1"
PROG_SRC="test_lwt_bpf.c"
BPF_PROG="test_lwt_bpf.o"
-TRACE_ROOT=/sys/kernel/debug/tracing
+TRACE_ROOT=/sys/kernel/tracing
CONTEXT_INFO=$(cat ${TRACE_ROOT}/trace_options | grep context)
function lookup_mac()
diff --git a/samples/bpf/test_overhead_tp.bpf.c b/samples/bpf/test_overhead_tp.bpf.c
index 67cab3881969..8b498328e961 100644
--- a/samples/bpf/test_overhead_tp.bpf.c
+++ b/samples/bpf/test_overhead_tp.bpf.c
@@ -7,7 +7,7 @@
#include "vmlinux.h"
#include <bpf/bpf_helpers.h>
-/* from /sys/kernel/debug/tracing/events/task/task_rename/format */
+/* from /sys/kernel/tracing/events/task/task_rename/format */
struct task_rename {
__u64 pad;
__u32 pid;
@@ -21,7 +21,7 @@ int prog(struct task_rename *ctx)
return 0;
}
-/* from /sys/kernel/debug/tracing/events/fib/fib_table_lookup/format */
+/* from /sys/kernel/tracing/events/fib/fib_table_lookup/format */
struct fib_table_lookup {
__u64 pad;
__u32 tb_id;
diff --git a/tools/include/uapi/linux/bpf.h b/tools/include/uapi/linux/bpf.h
index d8c534e05b0a..13129df937cd 100644
--- a/tools/include/uapi/linux/bpf.h
+++ b/tools/include/uapi/linux/bpf.h
@@ -1647,17 +1647,17 @@ union bpf_attr {
* Description
* This helper is a "printk()-like" facility for debugging. It
* prints a message defined by format *fmt* (of size *fmt_size*)
- * to file *\/sys/kernel/debug/tracing/trace* from DebugFS, if
+ * to file *\/sys/kernel/tracing/trace* from TraceFS, if
* available. It can take up to three additional **u64**
* arguments (as an eBPF helpers, the total number of arguments is
* limited to five).
*
* Each time the helper is called, it appends a line to the trace.
- * Lines are discarded while *\/sys/kernel/debug/tracing/trace* is
- * open, use *\/sys/kernel/debug/tracing/trace_pipe* to avoid this.
+ * Lines are discarded while *\/sys/kernel/tracing/trace* is
+ * open, use *\/sys/kernel/tracing/trace_pipe* to avoid this.
* The format of the trace is customizable, and the exact output
* one will get depends on the options set in
- * *\/sys/kernel/debug/tracing/trace_options* (see also the
+ * *\/sys/kernel/tracing/trace_options* (see also the
* *README* file under the same directory). However, it usually
* defaults to something like:
*
base-commit: d1d51a62d060d02f99ee407959e24ad10a40e053
prerequisite-patch-id: 9d1a70f239e7476600fe4018125df58a368dc725
prerequisite-patch-id: 29fea9a24684ec09762b277403d7bffffb25cdf3
prerequisite-patch-id: 9cb5a22a0f88413c393ddc29f264fbd96938c598
prerequisite-patch-id: 87ce0f3257a51e8cc06dd21ae3fa4102406ba4b4
prerequisite-patch-id: a46e67372e8493e5f7dab95f72281bd690cbeacf
prerequisite-patch-id: bae92ed6da92da5587f8d54fed5976c7dd6a468a
prerequisite-patch-id: c84726372fab0771a2c2ff0942f13a9556db8740
prerequisite-patch-id: 8a1a8806ec58ca208ee81f83557af90472fcba7f
prerequisite-patch-id: 0f7d6ec99549b042bc37603a2a9034853015a6d6
prerequisite-patch-id: 88a110f7993c374c6df429a1f67706e5abd65a02
prerequisite-patch-id: 3ada332d91275a471e9b65eb532571ef5caad4af
prerequisite-patch-id: e7ade2dda63127886579bf88f3eddda82d6a103b
prerequisite-patch-id: a49488cb1b167a9c85405c142cc3edb7bdb32c3d
prerequisite-patch-id: 9656ecd9c036e140d819c3929f01ac7264452382
prerequisite-patch-id: d1fa19bc1974a78632f48080b4eef3d4d6c07d3d
prerequisite-patch-id: 245b71b3aecf33a9d2a9609fc45f72ac50d1e92a
prerequisite-patch-id: 1253300de46fe258927fd3ddd5009a1468f6e69b
prerequisite-patch-id: 638e5805bdaa8842589729a26707c47a593464c2
prerequisite-patch-id: 1d08f9dfe4c360d566edbee925424b789e0f844b
prerequisite-patch-id: b6c73e77b10fc771566de294973334646cad4d44
prerequisite-patch-id: 57034da9a1b439c9fa3ecca69a099204a339502a
prerequisite-patch-id: ef11bfbcdf2239002958554e2dc5fbe8ec4d6e9a
prerequisite-patch-id: 68c01f7ca5b9c740b9259b73d97f168765c794d0
prerequisite-patch-id: 846110172a75fdaf1017da1fec3709fa301a5a47
prerequisite-patch-id: 8070c339fe5ce2e46b5de76b59d0a3f2c25d9abb
prerequisite-patch-id: c48cc68777605390db454b6392569ccdcd88cdc1
prerequisite-patch-id: 0d36d64d21de2d0df3ac31c5203a5cd868b4be47
prerequisite-patch-id: 6538cefc509c89e2375dcb6dc85d11fb6993474d
prerequisite-patch-id: dc57bbf1190a31aec332cab39f990ac568e6722d
prerequisite-patch-id: 0d90b60b4ce60024f31f576bab79453f6d480a8e
prerequisite-patch-id: 15c1914741be406aeee6c66332f079f3f8367751
prerequisite-patch-id: 78a735554858860fa695dd9e20bf7c5a41fafe20
prerequisite-patch-id: 238aaa7c1f55fdac815a6e14310d074c1ac70983
prerequisite-patch-id: d514061d937de74e8cc3d8848488a60dad2e2a2e
prerequisite-patch-id: 0f1a878f5768b886db78ea0fc6fe17d2297daa2e
prerequisite-patch-id: fa48be79a1e1e1c611d7975501a8f9dfa6f1c4fe
prerequisite-patch-id: 0a193e915faed8479f150c30ba0c335e288f634f
prerequisite-patch-id: 2cab00be3bb34454f98dac426301468e7ef12ad1
prerequisite-patch-id: daa2a81b90fda8ca09d11a35aff5a282e6f76ec2
prerequisite-patch-id: 5001694a51d83ed8ca428855b92b3ead261a469d
--
2.40.0.rc1.284.g88254d51c5-goog
On Fri, 10 Mar 2023 10:52:08 -0700
[email protected] wrote:
> From: Ross Zwisler <[email protected]>
>
> The canonical location for the tracefs filesystem is at /sys/kernel/tracing.
>
> But, from Documentation/trace/ftrace.rst:
>
> Before 4.1, all ftrace tracing control files were within the debugfs
> file system, which is typically located at /sys/kernel/debug/tracing.
> For backward compatibility, when mounting the debugfs file system,
> the tracefs file system will be automatically mounted at:
>
> /sys/kernel/debug/tracing
>
> Many comments and samples in the bpf code still refer to this older
> debugfs path, so let's update them to avoid confusion. There are a few
> spots where the bpf code explicitly checks both tracefs and debugfs
> (tools/bpf/bpftool/tracelog.c and tools/lib/api/fs/fs.c) and I've left
> those alone so that the tools can continue to work with both paths.
>
> Signed-off-by: Ross Zwisler <[email protected]>
> Acked-by: Michael S. Tsirkin <[email protected]>
Reviewed-by: Steven Rostedt (Google) <[email protected]>
-- Steve