Add the DIMM SPD to the processor I2C busses.
Signed-off-by: Eddie James <[email protected]>
---
arch/arm/boot/dts/aspeed-bmc-ibm-bonnell.dts | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-bonnell.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-bonnell.dts
index 79516dc21c01..ab99d915b50e 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ibm-bonnell.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ibm-bonnell.dts
@@ -232,18 +232,38 @@ cfam0_i2c1: i2c-bus@1 {
cfam0_i2c10: i2c-bus@a {
reg = <10>; /* OP3A */
+
+ eeprom@50 {
+ compatible = "atmel,at30tse004a";
+ reg = <0x50>;
+ };
};
cfam0_i2c11: i2c-bus@b {
reg = <11>; /* OP3B */
+
+ eeprom@50 {
+ compatible = "atmel,at30tse004a";
+ reg = <0x50>;
+ };
};
cfam0_i2c12: i2c-bus@c {
reg = <12>; /* OP4A */
+
+ eeprom@50 {
+ compatible = "atmel,at30tse004a";
+ reg = <0x50>;
+ };
};
cfam0_i2c13: i2c-bus@d {
reg = <13>; /* OP4B */
+
+ eeprom@50 {
+ compatible = "atmel,at30tse004a";
+ reg = <0x50>;
+ };
};
cfam0_i2c14: i2c-bus@e {
--
2.31.1
On Wed, 22 Mar 2023 at 14:04, Eddie James <[email protected]> wrote:
>
> Add the DIMM SPD to the processor I2C busses.
>
> Signed-off-by: Eddie James <[email protected]>
Reviewed-by: Joel Stanley <[email protected]>
I will take this through the aspeed tree.
> ---
> arch/arm/boot/dts/aspeed-bmc-ibm-bonnell.dts | 20 ++++++++++++++++++++
> 1 file changed, 20 insertions(+)
>
> diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-bonnell.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-bonnell.dts
> index 79516dc21c01..ab99d915b50e 100644
> --- a/arch/arm/boot/dts/aspeed-bmc-ibm-bonnell.dts
> +++ b/arch/arm/boot/dts/aspeed-bmc-ibm-bonnell.dts
> @@ -232,18 +232,38 @@ cfam0_i2c1: i2c-bus@1 {
>
> cfam0_i2c10: i2c-bus@a {
> reg = <10>; /* OP3A */
> +
> + eeprom@50 {
> + compatible = "atmel,at30tse004a";
> + reg = <0x50>;
> + };
> };
>
> cfam0_i2c11: i2c-bus@b {
> reg = <11>; /* OP3B */
> +
> + eeprom@50 {
> + compatible = "atmel,at30tse004a";
> + reg = <0x50>;
> + };
> };
>
> cfam0_i2c12: i2c-bus@c {
> reg = <12>; /* OP4A */
> +
> + eeprom@50 {
> + compatible = "atmel,at30tse004a";
> + reg = <0x50>;
> + };
> };
>
> cfam0_i2c13: i2c-bus@d {
> reg = <13>; /* OP4B */
> +
> + eeprom@50 {
> + compatible = "atmel,at30tse004a";
> + reg = <0x50>;
> + };
> };
>
> cfam0_i2c14: i2c-bus@e {
> --
> 2.31.1
>