As both SDCC and UFS drivers use the ICE with duplicated implementation,
while none of the currently supported platforms make use concomitantly
of the same ICE IP block instance, the new SM8550 allows both UFS and
SDCC to do so. In order to support such scenario, there is a need for
a unified implementation and a devicetree node to be shared between
both types of storage devices. So lets drop the duplicate implementation
of the ICE from both SDCC and UFS and make it a dedicated (soc) driver.
Also, switch all UFS and SDCC devicetree nodes to use the new ICE
approach.
The v4 is here:
https://lore.kernel.org/all/[email protected]/
Changes since v4:
* dropped the SDHCI dt-bindings patch as it will be added along
with the first use of qcom,ice property from an SDHCI DT node
See each individual patch for changelogs.
Abel Vesa (6):
dt-bindings: crypto: Add Qualcomm Inline Crypto Engine
dt-bindings: ufs: qcom: Add ICE phandle
soc: qcom: Make the Qualcomm UFS/SDCC ICE a dedicated driver
scsi: ufs: ufs-qcom: Switch to the new ICE API
mmc: sdhci-msm: Switch to the new ICE API
arm64: dts: qcom: sm8550: Add the Inline Crypto Engine node
.../crypto/qcom,inline-crypto-engine.yaml | 42 ++
.../devicetree/bindings/ufs/qcom,ufs.yaml | 19 +
arch/arm64/boot/dts/qcom/sm8550.dtsi | 10 +
drivers/mmc/host/Kconfig | 2 +-
drivers/mmc/host/sdhci-msm.c | 220 +++--------
drivers/soc/qcom/Kconfig | 4 +
drivers/soc/qcom/Makefile | 1 +
drivers/soc/qcom/ice.c | 365 ++++++++++++++++++
drivers/ufs/host/Kconfig | 2 +-
drivers/ufs/host/Makefile | 4 +-
drivers/ufs/host/ufs-qcom-ice.c | 244 ------------
drivers/ufs/host/ufs-qcom.c | 97 ++++-
drivers/ufs/host/ufs-qcom.h | 32 +-
include/soc/qcom/ice.h | 37 ++
14 files changed, 626 insertions(+), 453 deletions(-)
create mode 100644 Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml
create mode 100644 drivers/soc/qcom/ice.c
delete mode 100644 drivers/ufs/host/ufs-qcom-ice.c
create mode 100644 include/soc/qcom/ice.h
--
2.34.1
Add schema file for new Qualcomm Inline Crypto Engine driver.
Signed-off-by: Abel Vesa <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Eric Biggers <[email protected]>
---
The v4 is here:
https://lore.kernel.org/all/[email protected]/
Changes since v4:
* added Eric's R-b tag
Changes since v3:
* added Krzysztof's R-b tag
Changes since v2:
* moved the file to crypto dir
* added soc specific compatible
* dropped top level description
* renamed node to crypto and dropped label in example
.../crypto/qcom,inline-crypto-engine.yaml | 42 +++++++++++++++++++
1 file changed, 42 insertions(+)
create mode 100644 Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml
diff --git a/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml b/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml
new file mode 100644
index 000000000000..92e1d76e29ee
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/qcom,inline-crypto-engine.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. (QTI) Inline Crypto Engine
+
+maintainers:
+ - Bjorn Andersson <[email protected]>
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - qcom,sm8550-inline-crypto-engine
+ - const: qcom,inline-crypto-engine
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,sm8550-gcc.h>
+
+ crypto@1d88000 {
+ compatible = "qcom,sm8550-inline-crypto-engine",
+ "qcom,inline-crypto-engine";
+ reg = <0x01d88000 0x8000>;
+ clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
+ };
+...
--
2.34.1
Now that there is a new dedicated ICE driver, drop the ufs-qcom-ice and
use the new ICE api provided by the Qualcomm soc driver ice. The platforms
that already have ICE support will use the API as library since there will
not be a devicetree node, but instead they have reg range. In this case,
the of_qcom_ice_get will return an ICE instance created for the consumer's
device. But if there are platforms that do not have ice reg in the
consumer devicetree node and instead provide a dedicated ICE devicetree
node, the of_qcom_ice_get will look up the device based on qcom,ice
property and will get the ICE instance registered by the probe function
of the ice driver.
Signed-off-by: Abel Vesa <[email protected]>
---
The v4 is here:
https://lore.kernel.org/all/[email protected]/
Changes since v4:
* moved the setting of the UFSHCD_CAP_CRYPTO in the ufs_qcom_ice_init
Changes since v3:
* since ufs-qcom-ice is being dropped, switch back to single file for CONFIG_SCSI_UFS_QCOM
* handle properly the not-supported error returned by of_qcom_ice_get
* drop cfg->crypto_cap_idx argument from qcom_ice_program_key call
* added back the clearing of UFSHCD_CAP_CRYPTO and its checks in resume and enable
Changes since v2:
* added the suspend API call for ICE
* kept old wrappers over ICE API in
Changes since v1:
* Added a check for supported algorithm and key size
and passed the ICE defined values for algorithm and key size
* Added call to evict function
drivers/ufs/host/Kconfig | 2 +-
drivers/ufs/host/Makefile | 4 +-
drivers/ufs/host/ufs-qcom-ice.c | 244 --------------------------------
drivers/ufs/host/ufs-qcom.c | 97 ++++++++++++-
drivers/ufs/host/ufs-qcom.h | 32 +----
5 files changed, 102 insertions(+), 277 deletions(-)
delete mode 100644 drivers/ufs/host/ufs-qcom-ice.c
diff --git a/drivers/ufs/host/Kconfig b/drivers/ufs/host/Kconfig
index 8793e3433580..16624ba08050 100644
--- a/drivers/ufs/host/Kconfig
+++ b/drivers/ufs/host/Kconfig
@@ -59,7 +59,7 @@ config SCSI_UFS_QCOM
depends on SCSI_UFSHCD_PLATFORM && ARCH_QCOM
depends on GENERIC_MSI_IRQ
depends on RESET_CONTROLLER
- select QCOM_SCM if SCSI_UFS_CRYPTO
+ select QCOM_INLINE_CRYPTO_ENGINE if SCSI_UFS_CRYPTO
help
This selects the QCOM specific additions to UFSHCD platform driver.
UFS host on QCOM needs some vendor specific configuration before
diff --git a/drivers/ufs/host/Makefile b/drivers/ufs/host/Makefile
index d7c5bf7fa512..4573aead02eb 100644
--- a/drivers/ufs/host/Makefile
+++ b/drivers/ufs/host/Makefile
@@ -3,9 +3,7 @@
obj-$(CONFIG_SCSI_UFS_DWC_TC_PCI) += tc-dwc-g210-pci.o ufshcd-dwc.o tc-dwc-g210.o
obj-$(CONFIG_SCSI_UFS_DWC_TC_PLATFORM) += tc-dwc-g210-pltfrm.o ufshcd-dwc.o tc-dwc-g210.o
obj-$(CONFIG_SCSI_UFS_CDNS_PLATFORM) += cdns-pltfrm.o
-obj-$(CONFIG_SCSI_UFS_QCOM) += ufs_qcom.o
-ufs_qcom-y += ufs-qcom.o
-ufs_qcom-$(CONFIG_SCSI_UFS_CRYPTO) += ufs-qcom-ice.o
+obj-$(CONFIG_SCSI_UFS_QCOM) += ufs-qcom.o
obj-$(CONFIG_SCSI_UFS_EXYNOS) += ufs-exynos.o
obj-$(CONFIG_SCSI_UFSHCD_PCI) += ufshcd-pci.o
obj-$(CONFIG_SCSI_UFSHCD_PLATFORM) += ufshcd-pltfrm.o
diff --git a/drivers/ufs/host/ufs-qcom-ice.c b/drivers/ufs/host/ufs-qcom-ice.c
deleted file mode 100644
index 453978877ae9..000000000000
--- a/drivers/ufs/host/ufs-qcom-ice.c
+++ /dev/null
@@ -1,244 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Qualcomm ICE (Inline Crypto Engine) support.
- *
- * Copyright (c) 2014-2019, The Linux Foundation. All rights reserved.
- * Copyright 2019 Google LLC
- */
-
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/firmware/qcom/qcom_scm.h>
-
-#include "ufs-qcom.h"
-
-#define AES_256_XTS_KEY_SIZE 64
-
-/* QCOM ICE registers */
-
-#define QCOM_ICE_REG_CONTROL 0x0000
-#define QCOM_ICE_REG_RESET 0x0004
-#define QCOM_ICE_REG_VERSION 0x0008
-#define QCOM_ICE_REG_FUSE_SETTING 0x0010
-#define QCOM_ICE_REG_PARAMETERS_1 0x0014
-#define QCOM_ICE_REG_PARAMETERS_2 0x0018
-#define QCOM_ICE_REG_PARAMETERS_3 0x001C
-#define QCOM_ICE_REG_PARAMETERS_4 0x0020
-#define QCOM_ICE_REG_PARAMETERS_5 0x0024
-
-/* QCOM ICE v3.X only */
-#define QCOM_ICE_GENERAL_ERR_STTS 0x0040
-#define QCOM_ICE_INVALID_CCFG_ERR_STTS 0x0030
-#define QCOM_ICE_GENERAL_ERR_MASK 0x0044
-
-/* QCOM ICE v2.X only */
-#define QCOM_ICE_REG_NON_SEC_IRQ_STTS 0x0040
-#define QCOM_ICE_REG_NON_SEC_IRQ_MASK 0x0044
-
-#define QCOM_ICE_REG_NON_SEC_IRQ_CLR 0x0048
-#define QCOM_ICE_REG_STREAM1_ERROR_SYNDROME1 0x0050
-#define QCOM_ICE_REG_STREAM1_ERROR_SYNDROME2 0x0054
-#define QCOM_ICE_REG_STREAM2_ERROR_SYNDROME1 0x0058
-#define QCOM_ICE_REG_STREAM2_ERROR_SYNDROME2 0x005C
-#define QCOM_ICE_REG_STREAM1_BIST_ERROR_VEC 0x0060
-#define QCOM_ICE_REG_STREAM2_BIST_ERROR_VEC 0x0064
-#define QCOM_ICE_REG_STREAM1_BIST_FINISH_VEC 0x0068
-#define QCOM_ICE_REG_STREAM2_BIST_FINISH_VEC 0x006C
-#define QCOM_ICE_REG_BIST_STATUS 0x0070
-#define QCOM_ICE_REG_BYPASS_STATUS 0x0074
-#define QCOM_ICE_REG_ADVANCED_CONTROL 0x1000
-#define QCOM_ICE_REG_ENDIAN_SWAP 0x1004
-#define QCOM_ICE_REG_TEST_BUS_CONTROL 0x1010
-#define QCOM_ICE_REG_TEST_BUS_REG 0x1014
-
-/* BIST ("built-in self-test"?) status flags */
-#define QCOM_ICE_BIST_STATUS_MASK 0xF0000000
-
-#define QCOM_ICE_FUSE_SETTING_MASK 0x1
-#define QCOM_ICE_FORCE_HW_KEY0_SETTING_MASK 0x2
-#define QCOM_ICE_FORCE_HW_KEY1_SETTING_MASK 0x4
-
-#define qcom_ice_writel(host, val, reg) \
- writel((val), (host)->ice_mmio + (reg))
-#define qcom_ice_readl(host, reg) \
- readl((host)->ice_mmio + (reg))
-
-static bool qcom_ice_supported(struct ufs_qcom_host *host)
-{
- struct device *dev = host->hba->dev;
- u32 regval = qcom_ice_readl(host, QCOM_ICE_REG_VERSION);
- int major = regval >> 24;
- int minor = (regval >> 16) & 0xFF;
- int step = regval & 0xFFFF;
-
- /* For now this driver only supports ICE version 3. */
- if (major != 3) {
- dev_warn(dev, "Unsupported ICE version: v%d.%d.%d\n",
- major, minor, step);
- return false;
- }
-
- dev_info(dev, "Found QC Inline Crypto Engine (ICE) v%d.%d.%d\n",
- major, minor, step);
-
- /* If fuses are blown, ICE might not work in the standard way. */
- regval = qcom_ice_readl(host, QCOM_ICE_REG_FUSE_SETTING);
- if (regval & (QCOM_ICE_FUSE_SETTING_MASK |
- QCOM_ICE_FORCE_HW_KEY0_SETTING_MASK |
- QCOM_ICE_FORCE_HW_KEY1_SETTING_MASK)) {
- dev_warn(dev, "Fuses are blown; ICE is unusable!\n");
- return false;
- }
- return true;
-}
-
-int ufs_qcom_ice_init(struct ufs_qcom_host *host)
-{
- struct ufs_hba *hba = host->hba;
- struct device *dev = hba->dev;
- struct platform_device *pdev = to_platform_device(dev);
- struct resource *res;
- int err;
-
- if (!(ufshcd_readl(hba, REG_CONTROLLER_CAPABILITIES) &
- MASK_CRYPTO_SUPPORT))
- return 0;
-
- res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ice");
- if (!res) {
- dev_warn(dev, "ICE registers not found\n");
- goto disable;
- }
-
- if (!qcom_scm_ice_available()) {
- dev_warn(dev, "ICE SCM interface not found\n");
- goto disable;
- }
-
- host->ice_mmio = devm_ioremap_resource(dev, res);
- if (IS_ERR(host->ice_mmio)) {
- err = PTR_ERR(host->ice_mmio);
- return err;
- }
-
- if (!qcom_ice_supported(host))
- goto disable;
-
- return 0;
-
-disable:
- dev_warn(dev, "Disabling inline encryption support\n");
- hba->caps &= ~UFSHCD_CAP_CRYPTO;
- return 0;
-}
-
-static void qcom_ice_low_power_mode_enable(struct ufs_qcom_host *host)
-{
- u32 regval;
-
- regval = qcom_ice_readl(host, QCOM_ICE_REG_ADVANCED_CONTROL);
- /*
- * Enable low power mode sequence
- * [0]-0, [1]-0, [2]-0, [3]-E, [4]-0, [5]-0, [6]-0, [7]-0
- */
- regval |= 0x7000;
- qcom_ice_writel(host, regval, QCOM_ICE_REG_ADVANCED_CONTROL);
-}
-
-static void qcom_ice_optimization_enable(struct ufs_qcom_host *host)
-{
- u32 regval;
-
- /* ICE Optimizations Enable Sequence */
- regval = qcom_ice_readl(host, QCOM_ICE_REG_ADVANCED_CONTROL);
- regval |= 0xD807100;
- /* ICE HPG requires delay before writing */
- udelay(5);
- qcom_ice_writel(host, regval, QCOM_ICE_REG_ADVANCED_CONTROL);
- udelay(5);
-}
-
-int ufs_qcom_ice_enable(struct ufs_qcom_host *host)
-{
- if (!(host->hba->caps & UFSHCD_CAP_CRYPTO))
- return 0;
- qcom_ice_low_power_mode_enable(host);
- qcom_ice_optimization_enable(host);
- return ufs_qcom_ice_resume(host);
-}
-
-/* Poll until all BIST bits are reset */
-static int qcom_ice_wait_bist_status(struct ufs_qcom_host *host)
-{
- int count;
- u32 reg;
-
- for (count = 0; count < 100; count++) {
- reg = qcom_ice_readl(host, QCOM_ICE_REG_BIST_STATUS);
- if (!(reg & QCOM_ICE_BIST_STATUS_MASK))
- break;
- udelay(50);
- }
- if (reg)
- return -ETIMEDOUT;
- return 0;
-}
-
-int ufs_qcom_ice_resume(struct ufs_qcom_host *host)
-{
- int err;
-
- if (!(host->hba->caps & UFSHCD_CAP_CRYPTO))
- return 0;
-
- err = qcom_ice_wait_bist_status(host);
- if (err) {
- dev_err(host->hba->dev, "BIST status error (%d)\n", err);
- return err;
- }
- return 0;
-}
-
-/*
- * Program a key into a QC ICE keyslot, or evict a keyslot. QC ICE requires
- * vendor-specific SCM calls for this; it doesn't support the standard way.
- */
-int ufs_qcom_ice_program_key(struct ufs_hba *hba,
- const union ufs_crypto_cfg_entry *cfg, int slot)
-{
- union ufs_crypto_cap_entry cap;
- union {
- u8 bytes[AES_256_XTS_KEY_SIZE];
- u32 words[AES_256_XTS_KEY_SIZE / sizeof(u32)];
- } key;
- int i;
- int err;
-
- if (!(cfg->config_enable & UFS_CRYPTO_CONFIGURATION_ENABLE))
- return qcom_scm_ice_invalidate_key(slot);
-
- /* Only AES-256-XTS has been tested so far. */
- cap = hba->crypto_cap_array[cfg->crypto_cap_idx];
- if (cap.algorithm_id != UFS_CRYPTO_ALG_AES_XTS ||
- cap.key_size != UFS_CRYPTO_KEY_SIZE_256) {
- dev_err_ratelimited(hba->dev,
- "Unhandled crypto capability; algorithm_id=%d, key_size=%d\n",
- cap.algorithm_id, cap.key_size);
- return -EINVAL;
- }
-
- memcpy(key.bytes, cfg->crypto_key, AES_256_XTS_KEY_SIZE);
-
- /*
- * The SCM call byte-swaps the 32-bit words of the key. So we have to
- * do the same, in order for the final key be correct.
- */
- for (i = 0; i < ARRAY_SIZE(key.words); i++)
- __cpu_to_be32s(&key.words[i]);
-
- err = qcom_scm_ice_set_key(slot, key.bytes, AES_256_XTS_KEY_SIZE,
- QCOM_SCM_ICE_CIPHER_AES_256_XTS,
- cfg->data_unit_size);
- memzero_explicit(&key, sizeof(key));
- return err;
-}
diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c
index 82d02e7f3b4f..eb700ced884d 100644
--- a/drivers/ufs/host/ufs-qcom.c
+++ b/drivers/ufs/host/ufs-qcom.c
@@ -15,6 +15,8 @@
#include <linux/reset-controller.h>
#include <linux/devfreq.h>
+#include <soc/qcom/ice.h>
+
#include <ufs/ufshcd.h>
#include "ufshcd-pltfrm.h"
#include <ufs/unipro.h>
@@ -55,6 +57,98 @@ static struct ufs_qcom_host *rcdev_to_ufs_host(struct reset_controller_dev *rcd)
return container_of(rcd, struct ufs_qcom_host, rcdev);
}
+#ifdef CONFIG_SCSI_UFS_CRYPTO
+
+static inline void ufs_qcom_ice_enable(struct ufs_qcom_host *host)
+{
+ if (host->hba->caps & UFSHCD_CAP_CRYPTO)
+ qcom_ice_enable(host->ice);
+}
+
+static int ufs_qcom_ice_init(struct ufs_qcom_host *host)
+{
+ struct ufs_hba *hba = host->hba;
+ struct device *dev = hba->dev;
+
+ host->ice = of_qcom_ice_get(dev);
+ if (host->ice == ERR_PTR(-EOPNOTSUPP)) {
+ dev_warn(dev, "Disabling inline encryption support\n");
+ host->ice = NULL;
+ }
+
+ if (IS_ERR_OR_NULL(host->ice))
+ return PTR_ERR_OR_ZERO(host->ice);
+
+ hba->caps |= UFSHCD_CAP_CRYPTO;
+
+ return 0;
+}
+
+static inline int ufs_qcom_ice_resume(struct ufs_qcom_host *host)
+{
+ if (host->hba->caps & UFSHCD_CAP_CRYPTO)
+ return qcom_ice_resume(host->ice);
+
+ return 0;
+}
+
+static inline int ufs_qcom_ice_suspend(struct ufs_qcom_host *host)
+{
+ if (host->hba->caps & UFSHCD_CAP_CRYPTO)
+ return qcom_ice_suspend(host->ice);
+
+ return 0;
+}
+
+static int ufs_qcom_ice_program_key(struct ufs_hba *hba,
+ const union ufs_crypto_cfg_entry *cfg,
+ int slot)
+{
+ struct ufs_qcom_host *host = ufshcd_get_variant(hba);
+ union ufs_crypto_cap_entry cap;
+ bool config_enable =
+ cfg->config_enable & UFS_CRYPTO_CONFIGURATION_ENABLE;
+
+ /* Only AES-256-XTS has been tested so far. */
+ cap = hba->crypto_cap_array[cfg->crypto_cap_idx];
+ if (cap.algorithm_id != UFS_CRYPTO_ALG_AES_XTS ||
+ cap.key_size != UFS_CRYPTO_KEY_SIZE_256)
+ return -EINVAL;
+
+ if (config_enable)
+ return qcom_ice_program_key(host->ice,
+ QCOM_ICE_CRYPTO_ALG_AES_XTS,
+ QCOM_ICE_CRYPTO_KEY_SIZE_256,
+ cfg->crypto_key,
+ cfg->data_unit_size, slot);
+ else
+ return qcom_ice_evict_key(host->ice, slot);
+}
+
+#else
+
+#define ufs_qcom_ice_program_key NULL
+
+static inline void ufs_qcom_ice_enable(struct ufs_qcom_host *host)
+{
+}
+
+static int ufs_qcom_ice_init(struct ufs_qcom_host *host)
+{
+ return 0;
+}
+
+static inline int ufs_qcom_ice_resume(struct ufs_qcom_host *host)
+{
+ return 0;
+}
+
+static inline int ufs_qcom_ice_suspend(struct ufs_qcom_host *host)
+{
+ return 0;
+}
+#endif
+
static int ufs_qcom_host_clk_get(struct device *dev,
const char *name, struct clk **clk_out, bool optional)
{
@@ -607,7 +701,7 @@ static int ufs_qcom_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op,
ufs_qcom_disable_lane_clks(host);
}
- return 0;
+ return ufs_qcom_ice_suspend(host);
}
static int ufs_qcom_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op)
@@ -853,7 +947,6 @@ static void ufs_qcom_set_caps(struct ufs_hba *hba)
hba->caps |= UFSHCD_CAP_CLK_SCALING | UFSHCD_CAP_WB_WITH_CLK_SCALING;
hba->caps |= UFSHCD_CAP_AUTO_BKOPS_SUSPEND;
hba->caps |= UFSHCD_CAP_WB_EN;
- hba->caps |= UFSHCD_CAP_CRYPTO;
hba->caps |= UFSHCD_CAP_AGGR_POWER_COLLAPSE;
hba->caps |= UFSHCD_CAP_RPM_AUTOSUSPEND;
diff --git a/drivers/ufs/host/ufs-qcom.h b/drivers/ufs/host/ufs-qcom.h
index 39e774254fb2..6289ad5a42d0 100644
--- a/drivers/ufs/host/ufs-qcom.h
+++ b/drivers/ufs/host/ufs-qcom.h
@@ -7,6 +7,7 @@
#include <linux/reset-controller.h>
#include <linux/reset.h>
+#include <soc/qcom/ice.h>
#include <ufs/ufshcd.h>
#define MAX_UFS_QCOM_HOSTS 1
@@ -205,12 +206,13 @@ struct ufs_qcom_host {
struct clk *tx_l1_sync_clk;
bool is_lane_clks_enabled;
+#ifdef CONFIG_SCSI_UFS_CRYPTO
+ struct qcom_ice *ice;
+#endif
+
void __iomem *dev_ref_clk_ctrl_mmio;
bool is_dev_ref_clk_enabled;
struct ufs_hw_version hw_ver;
-#ifdef CONFIG_SCSI_UFS_CRYPTO
- void __iomem *ice_mmio;
-#endif
u32 dev_ref_clk_en_mask;
@@ -248,28 +250,4 @@ static inline bool ufs_qcom_cap_qunipro(struct ufs_qcom_host *host)
return host->caps & UFS_QCOM_CAP_QUNIPRO;
}
-/* ufs-qcom-ice.c */
-
-#ifdef CONFIG_SCSI_UFS_CRYPTO
-int ufs_qcom_ice_init(struct ufs_qcom_host *host);
-int ufs_qcom_ice_enable(struct ufs_qcom_host *host);
-int ufs_qcom_ice_resume(struct ufs_qcom_host *host);
-int ufs_qcom_ice_program_key(struct ufs_hba *hba,
- const union ufs_crypto_cfg_entry *cfg, int slot);
-#else
-static inline int ufs_qcom_ice_init(struct ufs_qcom_host *host)
-{
- return 0;
-}
-static inline int ufs_qcom_ice_enable(struct ufs_qcom_host *host)
-{
- return 0;
-}
-static inline int ufs_qcom_ice_resume(struct ufs_qcom_host *host)
-{
- return 0;
-}
-#define ufs_qcom_ice_program_key NULL
-#endif /* !CONFIG_SCSI_UFS_CRYPTO */
-
#endif /* UFS_QCOM_H_ */
--
2.34.1
Hi Abel,
On Mon, Apr 03, 2023 at 11:05:28PM +0300, Abel Vesa wrote:
> Now that there is a new dedicated ICE driver, drop the ufs-qcom-ice and
> use the new ICE api provided by the Qualcomm soc driver ice. The platforms
> that already have ICE support will use the API as library since there will
> not be a devicetree node, but instead they have reg range. In this case,
> the of_qcom_ice_get will return an ICE instance created for the consumer's
> device. But if there are platforms that do not have ice reg in the
> consumer devicetree node and instead provide a dedicated ICE devicetree
> node, the of_qcom_ice_get will look up the device based on qcom,ice
> property and will get the ICE instance registered by the probe function
> of the ice driver.
>
> Signed-off-by: Abel Vesa <[email protected]>
This is still silent about how the ICE clock behavior is being changed.
I'm still trying to understand all this myself, so please bear with me, but my
understanding is that the UFS clocks can be disabled even while the host
controller is runtime-resumed. This is called "clock gating" in the code.
Before, the ICE clock was just listed as one of the UFS clocks. So, it was just
managed like the other UFS clocks.
Now, it appears that the ICE clock is always enabled while the host controller
is runtime-resumed. So, this patch removes support for gating of the ICE clock.
Is that intended?
- Eric