Add the binding description and the corresponding driver for
the BD2606.
Changes in V2:
- Add Datasheet link
- use fwnode api
- remove childnode count check, that will bail out
anyways later.
- add enable-gpios to binding but not to driver due to lack of
testing ability
Andreas Kemnade (2):
dt-bindings: leds: ROHM BD2606MVV LED driver
leds: bd2606mvv: Driver for the Rohm 6 Channel i2c LED driver
.../bindings/leds/rohm,bd2606mvv.yaml | 83 ++++++++++
drivers/leds/Kconfig | 11 ++
drivers/leds/Makefile | 1 +
drivers/leds/leds-bd2606mvv.c | 143 ++++++++++++++++++
4 files changed, 238 insertions(+)
create mode 100644 Documentation/devicetree/bindings/leds/rohm,bd2606mvv.yaml
create mode 100644 drivers/leds/leds-bd2606mvv.c
--
2.39.2
The device provides 6 channels which can be individually
turned off and on but groups of two channels share a common brightness
register.
Limitation: The GPIO to enable the device is not used yet.
Signed-off-by: Andreas Kemnade <[email protected]>
---
drivers/leds/Kconfig | 11 +++
drivers/leds/Makefile | 1 +
drivers/leds/leds-bd2606mvv.c | 143 ++++++++++++++++++++++++++++++++++
3 files changed, 155 insertions(+)
create mode 100644 drivers/leds/leds-bd2606mvv.c
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 9dbce09eabacf..cc4eadbb2542e 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -551,6 +551,17 @@ config LEDS_REGULATOR
help
This option enables support for regulator driven LEDs.
+config LEDS_BD2606MVV
+ tristate "LED driver for BD2606MVV"
+ depends on LEDS_CLASS
+ depends on I2C
+ select REGMAP_I2C
+ help
+ This option enables support for BD2606MVV LED driver chips
+ accessed via the I2C bus. It supports setting brightness, with
+ the limitiation that there are groups of two channels sharing
+ a brightness setting, but not the on/off setting.
+
config LEDS_BD2802
tristate "LED driver for BD2802 RGB LED"
depends on LEDS_CLASS
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index d30395d11fd84..c07d1512c745a 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -17,6 +17,7 @@ obj-$(CONFIG_LEDS_ARIEL) += leds-ariel.o
obj-$(CONFIG_LEDS_AW2013) += leds-aw2013.o
obj-$(CONFIG_LEDS_BCM6328) += leds-bcm6328.o
obj-$(CONFIG_LEDS_BCM6358) += leds-bcm6358.o
+obj-$(CONFIG_LEDS_BD2606MVV) += leds-bd2606mvv.o
obj-$(CONFIG_LEDS_BD2802) += leds-bd2802.o
obj-$(CONFIG_LEDS_BLINKM) += leds-blinkm.o
obj-$(CONFIG_LEDS_CLEVO_MAIL) += leds-clevo-mail.o
diff --git a/drivers/leds/leds-bd2606mvv.c b/drivers/leds/leds-bd2606mvv.c
new file mode 100644
index 0000000000000..808100e50487c
--- /dev/null
+++ b/drivers/leds/leds-bd2606mvv.c
@@ -0,0 +1,143 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2023 Andreas Kemnade
+ *
+ * Datasheet:
+ * https://fscdn.rohm.com/en/products/databook/datasheet/ic/power/led_driver/bd2606mvv_1-e.pdf
+ */
+
+#include <linux/i2c.h>
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#define BD2606_MAX_LEDS 6
+#define BD2606_MAX_BRIGHTNESS 63
+#define BD2606_REG_PWRCNT 3
+#define ldev_to_led(c) container_of(c, struct bd2606mvv_led, ldev)
+
+struct bd2606mvv_led {
+ bool active;
+ unsigned int led_no;
+ struct led_classdev ldev;
+ struct bd2606mvv_priv *priv;
+};
+
+struct bd2606mvv_priv {
+ struct bd2606mvv_led leds[BD2606_MAX_LEDS];
+ struct regmap *regmap;
+};
+
+static int
+bd2606mvv_brightness_set(struct led_classdev *led_cdev,
+ enum led_brightness brightness)
+{
+ struct bd2606mvv_led *led = ldev_to_led(led_cdev);
+ struct bd2606mvv_priv *priv = led->priv;
+ int err;
+
+ if (brightness == 0)
+ return regmap_update_bits(priv->regmap,
+ BD2606_REG_PWRCNT,
+ 1 << led->led_no,
+ 0);
+
+ /* shared brightness register */
+ err = regmap_write(priv->regmap, led->led_no / 2,
+ brightness);
+ if (err)
+ return err;
+
+ return regmap_update_bits(priv->regmap,
+ BD2606_REG_PWRCNT,
+ 1 << led->led_no,
+ 1 << led->led_no);
+}
+
+static const struct regmap_config bd2606mvv_regmap = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = 0x3,
+};
+
+static int bd2606mvv_probe(struct i2c_client *client)
+{
+ struct fwnode_handle *np, *child;
+ struct device *dev = &client->dev;
+ struct bd2606mvv_priv *priv;
+ int err, reg;
+
+ np = dev_fwnode(dev);
+ if (!np)
+ return -ENODEV;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->regmap = devm_regmap_init_i2c(client, &bd2606mvv_regmap);
+ if (IS_ERR(priv->regmap)) {
+ err = PTR_ERR(priv->regmap);
+ dev_err(dev, "Failed to allocate register map: %d\n", err);
+ return err;
+ }
+
+ i2c_set_clientdata(client, priv);
+
+ fwnode_for_each_available_child_node(np, child) {
+ struct bd2606mvv_led *led;
+ struct led_init_data init_data = {};
+
+ init_data.fwnode = child;
+
+ err = fwnode_property_read_u32(child, "reg", ®);
+ if (err) {
+ fwnode_handle_put(child);
+ return err;
+ }
+ if (reg < 0 || reg >= BD2606_MAX_LEDS ||
+ priv->leds[reg].active) {
+ fwnode_handle_put(child);
+ return -EINVAL;
+ }
+ led = &priv->leds[reg];
+
+ led->active = true;
+ led->priv = priv;
+ led->led_no = reg;
+ led->ldev.brightness_set_blocking = bd2606mvv_brightness_set;
+ led->ldev.max_brightness = BD2606_MAX_BRIGHTNESS;
+ err = devm_led_classdev_register_ext(dev, &led->ldev,
+ &init_data);
+ if (err < 0) {
+ fwnode_handle_put(child);
+ return dev_err_probe(dev, err,
+ "couldn't register LED %s\n",
+ led->ldev.name);
+ }
+ }
+ return 0;
+}
+
+static const struct of_device_id __maybe_unused of_bd2606mvv_leds_match[] = {
+ { .compatible = "rohm,bd2606mvv", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, of_bd2606mvv_leds_match);
+
+static struct i2c_driver bd2606mvv_driver = {
+ .driver = {
+ .name = "leds-bd2606mvv",
+ .of_match_table = of_match_ptr(of_bd2606mvv_leds_match),
+ },
+ .probe_new = bd2606mvv_probe,
+};
+
+module_i2c_driver(bd2606mvv_driver);
+
+MODULE_AUTHOR("Andreas Kemnade <[email protected]>");
+MODULE_DESCRIPTION("BD2606 LED driver");
+MODULE_LICENSE("GPL");
--
2.39.2
Document ROHM BD2606MVV LED driver devicetree bindings.
Signed-off-by: Andreas Kemnade <[email protected]>
---
.../bindings/leds/rohm,bd2606mvv.yaml | 83 +++++++++++++++++++
1 file changed, 83 insertions(+)
create mode 100644 Documentation/devicetree/bindings/leds/rohm,bd2606mvv.yaml
diff --git a/Documentation/devicetree/bindings/leds/rohm,bd2606mvv.yaml b/Documentation/devicetree/bindings/leds/rohm,bd2606mvv.yaml
new file mode 100644
index 0000000000000..7f53d09e7b054
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/rohm,bd2606mvv.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/rohm,bd2606mvv.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: BD2606MVV LED controller
+
+maintainers:
+ - Andreas Kemnade <[email protected]>
+
+description:
+ The BD2606 MVV is a programmable LED controller connected via I2C that can
+ drive 6 separate lines. Each of them can be individually switched on and off
+ but the brightness setting is shared between two of them.
+
+ Datasheet is available at
+ https://fscdn.rohm.com/en/products/databook/datasheet/ic/power/led_driver/bd2606mvv_1-e.pdf
+
+properties:
+ compatible:
+ const: rohm,bd2606mvv
+
+ reg:
+ description: I2C slave address of the controller.
+ maxItems: 1
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ enable-gpios:
+ maxItems: 1
+ description: GPIO pin to enable/disable the device.
+
+patternProperties:
+ "^led@[0-6]$":
+ type: object
+ $ref: common.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ reg:
+ minimum: 0
+ maximum: 6
+
+ required:
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+
+ #include <dt-bindings/leds/common.h>
+
+ i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led-controller@66 {
+ compatible = "rohm,bd2606mvv";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x66>;
+
+ led@0 {
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_POWER;
+ reg = <0x0>;
+ };
+
+ led@2 {
+ color = <LED_COLOR_ID_WHITE>;
+ function = LED_FUNCTION_STATUS;
+ reg = <0x2>;
+ };
+ };
+ };
+
+...
--
2.39.2
On 4/7/23 08:08, Andreas Kemnade wrote:
> Document ROHM BD2606MVV LED driver devicetree bindings.
>
> Signed-off-by: Andreas Kemnade <[email protected]>
FWIW:
Reviewed-by: Matti Vaittinen <[email protected]>
Yours,
-- Matti
--
Matti Vaittinen
Linux kernel developer at ROHM Semiconductors
Oulu Finland
~~ When things go utterly wrong vim users can always type :help! ~~
On 4/7/23 08:08, Andreas Kemnade wrote:
> The device provides 6 channels which can be individually
> turned off and on but groups of two channels share a common brightness
> register.
>
> Limitation: The GPIO to enable the device is not used yet.
>
> Signed-off-by: Andreas Kemnade <[email protected]>
> ---
> drivers/leds/Kconfig | 11 +++
> drivers/leds/Makefile | 1 +
> drivers/leds/leds-bd2606mvv.c | 143 ++++++++++++++++++++++++++++++++++
> 3 files changed, 155 insertions(+)
> create mode 100644 drivers/leds/leds-bd2606mvv.c
>
> diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
> index 9dbce09eabacf..cc4eadbb2542e 100644
> --- a/drivers/leds/Kconfig
> +++ b/drivers/leds/Kconfig
> @@ -551,6 +551,17 @@ config LEDS_REGULATOR
> help
> This option enables support for regulator driven LEDs.
>
> +config LEDS_BD2606MVV
> + tristate "LED driver for BD2606MVV"
> + depends on LEDS_CLASS
> + depends on I2C
> + select REGMAP_I2C
> + help
> + This option enables support for BD2606MVV LED driver chips
> + accessed via the I2C bus. It supports setting brightness, with
> + the limitiation that there are groups of two channels sharing
> + a brightness setting, but not the on/off setting.
> +
> config LEDS_BD2802
> tristate "LED driver for BD2802 RGB LED"
> depends on LEDS_CLASS
> diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
> index d30395d11fd84..c07d1512c745a 100644
> --- a/drivers/leds/Makefile
> +++ b/drivers/leds/Makefile
> @@ -17,6 +17,7 @@ obj-$(CONFIG_LEDS_ARIEL) += leds-ariel.o
> obj-$(CONFIG_LEDS_AW2013) += leds-aw2013.o
> obj-$(CONFIG_LEDS_BCM6328) += leds-bcm6328.o
> obj-$(CONFIG_LEDS_BCM6358) += leds-bcm6358.o
> +obj-$(CONFIG_LEDS_BD2606MVV) += leds-bd2606mvv.o
> obj-$(CONFIG_LEDS_BD2802) += leds-bd2802.o
> obj-$(CONFIG_LEDS_BLINKM) += leds-blinkm.o
> obj-$(CONFIG_LEDS_CLEVO_MAIL) += leds-clevo-mail.o
> diff --git a/drivers/leds/leds-bd2606mvv.c b/drivers/leds/leds-bd2606mvv.c
> new file mode 100644
> index 0000000000000..808100e50487c
> --- /dev/null
> +++ b/drivers/leds/leds-bd2606mvv.c
> @@ -0,0 +1,143 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (C) 2023 Andreas Kemnade
> + *
> + * Datasheet:
> + * https://fscdn.rohm.com/en/products/databook/datasheet/ic/power/led_driver/bd2606mvv_1-e.pdf
> + */
> +
> +#include <linux/i2c.h>
> +#include <linux/leds.h>
> +#include <linux/module.h>
> +#include <linux/mod_devicetable.h>
> +#include <linux/property.h>
> +#include <linux/regmap.h>
> +#include <linux/slab.h>
> +
> +#define BD2606_MAX_LEDS 6
> +#define BD2606_MAX_BRIGHTNESS 63
> +#define BD2606_REG_PWRCNT 3
> +#define ldev_to_led(c) container_of(c, struct bd2606mvv_led, ldev)
> +
> +struct bd2606mvv_led {
> + bool active;
I still think having this 'active' here for the whole lifetime of the
driver is a bit misleading. This, however, is a minor thing. With or
without the 'active' removed from the private data:
Reviewed-by: Matti Vaittinen <[email protected]>
Yours,
-- Matti
--
Matti Vaittinen
Linux kernel developer at ROHM Semiconductors
Oulu Finland
~~ When things go utterly wrong vim users can always type :help! ~~
On 07/04/2023 07:08, Andreas Kemnade wrote:
> Document ROHM BD2606MVV LED driver devicetree bindings.
Subject: maybe drop "driver" (suggests it is for Linux drivers, although
maybe it matches the actual hardware here?) and add missing verb, e.g.
"Add ROHM ..."
>
> Signed-off-by: Andreas Kemnade <[email protected]>
> ---
> .../bindings/leds/rohm,bd2606mvv.yaml | 83 +++++++++++++++++++
> 1 file changed, 83 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/leds/rohm,bd2606mvv.yaml
>
> diff --git a/Documentation/devicetree/bindings/leds/rohm,bd2606mvv.yaml b/Documentation/devicetree/bindings/leds/rohm,bd2606mvv.yaml
> new file mode 100644
> index 0000000000000..7f53d09e7b054
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/leds/rohm,bd2606mvv.yaml
> @@ -0,0 +1,83 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/leds/rohm,bd2606mvv.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: BD2606MVV LED controller
ROHM BD....
> +
> +maintainers:
> + - Andreas Kemnade <[email protected]>
> +
> +description:
> + The BD2606 MVV is a programmable LED controller connected via I2C that can
> + drive 6 separate lines. Each of them can be individually switched on and off
> + but the brightness setting is shared between two of them.
> +
> + Datasheet is available at
> + https://fscdn.rohm.com/en/products/databook/datasheet/ic/power/led_driver/bd2606mvv_1-e.pdf
> +
> +properties:
> + compatible:
> + const: rohm,bd2606mvv
> +
> + reg:
> + description: I2C slave address of the controller.
Drop description, it's obvious.
> + maxItems: 1
> +
> + "#address-cells":
> + const: 1
> +
> + "#size-cells":
> + const: 0
> +
> + enable-gpios:
> + maxItems: 1
> + description: GPIO pin to enable/disable the device.
> +
> +patternProperties:
> + "^led@[0-6]$":
> + type: object
> + $ref: common.yaml#
> + unevaluatedProperties: false
> +
> + properties:
> + reg:
> + minimum: 0
> + maximum: 6
> +
> + required:
> + - reg
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> +
Drop blank line
> + #include <dt-bindings/leds/common.h>
> +
> + i2c0 {
i2c {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + led-controller@66 {
> + compatible = "rohm,bd2606mvv";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x66>;
reg is always second property in DTS.
> +
> + led@0 {
> + color = <LED_COLOR_ID_RED>;
> + function = LED_FUNCTION_POWER;
> + reg = <0x0>;
Ditto
Best regards,
Krzysztof
On Mon, 10 Apr 2023 17:34:00 +0200
Krzysztof Kozlowski <[email protected]> wrote:
[...]
> > + led-controller@66 {
> > + compatible = "rohm,bd2606mvv";
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + reg = <0x66>;
>
> reg is always second property in DTS.
>
> > +
> > + led@0 {
> > + color = <LED_COLOR_ID_RED>;
> > + function = LED_FUNCTION_POWER;
> > + reg = <0x0>;
>
> Ditto
>
hmm, reg also second if no compatible first? I see it usually first in
such cases.
Regards,
Andreas
On 11/04/2023 21:30, Andreas Kemnade wrote:
> On Mon, 10 Apr 2023 17:34:00 +0200
> Krzysztof Kozlowski <[email protected]> wrote:
>
> [...]
>>> + led-controller@66 {
>>> + compatible = "rohm,bd2606mvv";
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> + reg = <0x66>;
>>
>> reg is always second property in DTS.
>>
>>> +
>>> + led@0 {
>>> + color = <LED_COLOR_ID_RED>;
>>> + function = LED_FUNCTION_POWER;
>>> + reg = <0x0>;
>>
>> Ditto
>>
> hmm, reg also second if no compatible first? I see it usually first in
> such cases.
Right, then reg is first.
Best regards,
Krzysztof