Add properties to the qfprom node for multi channel DDR.
Signed-off-by: Komal Bajaj <[email protected]>
---
arch/arm64/boot/dts/qcom/qdu1000.dtsi | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/qdu1000.dtsi b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
index 734438113bba..418644f396bc 100644
--- a/arch/arm64/boot/dts/qcom/qdu1000.dtsi
+++ b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
@@ -1333,6 +1333,18 @@
interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
multi-ch-bit-off = <24 2>;
};
+
+ qfprom: efuse@221c8000 {
+ compatible = "qcom,qdu1000-qfprom", "qcom,qfprom";
+ reg = <0 0x221c8000 0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ multi_chan_ddr: multi_chan_ddr@12b {
+ reg = <0x12b 0x1>;
+ bits = <0 2>;
+ };
+ };
};
timer {
--
2.17.1
On 12/05/2023 14:21, Komal Bajaj wrote:
> Add properties to the qfprom node for multi channel DDR.
>
> Signed-off-by: Komal Bajaj <[email protected]>
DTS goes to the end of patchset. Better - to separate patchset with
links to bindings.
Subject: drop redundant pieces, it's too long without actual need.
"properties to" can be skipped.
> ---
> arch/arm64/boot/dts/qcom/qdu1000.dtsi | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/qdu1000.dtsi b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
> index 734438113bba..418644f396bc 100644
> --- a/arch/arm64/boot/dts/qcom/qdu1000.dtsi
> +++ b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
> @@ -1333,6 +1333,18 @@
> interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
> multi-ch-bit-off = <24 2>;
> };
> +
> + qfprom: efuse@221c8000 {
> + compatible = "qcom,qdu1000-qfprom", "qcom,qfprom";
> + reg = <0 0x221c8000 0 0x1000>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + multi_chan_ddr: multi_chan_ddr@12b {
No underscores in node names.
Best regards,
Krzysztof