From: Arınç ÜNAL <[email protected]>
BPDUs are link-local frames, therefore they must be trapped to the CPU
port. Currently, the MT7530 switch treats BPDUs as regular multicast
frames, therefore flooding them to user ports. To fix this, set BPDUs to be
trapped to the CPU port. Group this on mt7530_setup() and
mt7531_setup_common() into mt753x_trap_frames() and call that.
Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch")
Signed-off-by: Arınç ÜNAL <[email protected]>
---
drivers/net/dsa/mt7530.c | 14 +++++++++++---
1 file changed, 11 insertions(+), 3 deletions(-)
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 8c9acf109a4e..5e4f6965cebd 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -985,6 +985,14 @@ static void mt7530_setup_port5(struct dsa_switch *ds, phy_interface_t interface)
mutex_unlock(&priv->reg_mutex);
}
+static void
+mt753x_trap_frames(struct mt7530_priv *priv)
+{
+ /* Trap BPDUs to the CPU port(s) */
+ mt7530_rmw(priv, MT753X_BPC, MT753X_BPDU_PORT_FW_MASK,
+ MT753X_BPDU_CPU_ONLY);
+}
+
static int
mt753x_cpu_port_enable(struct dsa_switch *ds, int port)
{
@@ -2262,6 +2270,8 @@ mt7530_setup(struct dsa_switch *ds)
priv->p6_interface = PHY_INTERFACE_MODE_NA;
+ mt753x_trap_frames(priv);
+
/* Enable and reset MIB counters */
mt7530_mib_reset(ds);
@@ -2361,9 +2371,7 @@ mt7531_setup_common(struct dsa_switch *ds)
struct mt7530_priv *priv = ds->priv;
int ret, i;
- /* Trap BPDUs to the CPU port(s) */
- mt7530_rmw(priv, MT753X_BPC, MT753X_BPDU_PORT_FW_MASK,
- MT753X_BPDU_CPU_ONLY);
+ mt753x_trap_frames(priv);
/* Enable and reset MIB counters */
mt7530_mib_reset(ds);
--
2.39.2
On Sat, Jun 17, 2023 at 09:26:46AM +0300, [email protected] wrote:
> From: Arınç ÜNAL <[email protected]>
>
> BPDUs are link-local frames, therefore they must be trapped to the CPU
> port. Currently, the MT7530 switch treats BPDUs as regular multicast
> frames, therefore flooding them to user ports. To fix this, set BPDUs to be
> trapped to the CPU port. Group this on mt7530_setup() and
> mt7531_setup_common() into mt753x_trap_frames() and call that.
>
> Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch")
> Signed-off-by: Arınç ÜNAL <[email protected]>
Reviewed-by: Russell King (Oracle) <[email protected]>
Thanks!
> +static void
> +mt753x_trap_frames(struct mt7530_priv *priv)
The only niggle is that it's not necessary to split this line, but as
other functions do this, it's better to follow the already established
convention in the file.
--
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!
On Sat, Jun 17, 2023 at 09:26:46AM +0300, [email protected] wrote:
> From: Arınç ÜNAL <[email protected]>
>
> BPDUs are link-local frames, therefore they must be trapped to the CPU
> port. Currently, the MT7530 switch treats BPDUs as regular multicast
> frames, therefore flooding them to user ports. To fix this, set BPDUs to be
> trapped to the CPU port. Group this on mt7530_setup() and
> mt7531_setup_common() into mt753x_trap_frames() and call that.
>
> Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch")
> Signed-off-by: Arınç ÜNAL <[email protected]>
> ---
Reviewed-by: Vladimir Oltean <[email protected]>
On 6/17/2023 7:26 AM, [email protected] wrote:
> From: Arınç ÜNAL <[email protected]>
>
> BPDUs are link-local frames, therefore they must be trapped to the CPU
> port. Currently, the MT7530 switch treats BPDUs as regular multicast
> frames, therefore flooding them to user ports. To fix this, set BPDUs to be
> trapped to the CPU port. Group this on mt7530_setup() and
> mt7531_setup_common() into mt753x_trap_frames() and call that.
>
> Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch")
> Signed-off-by: Arınç ÜNAL <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
--
Florian