When the registers of the csc and scaler sub blocks are printed during a
device core dump, the sub block title is printed: <mainBlkName_sblkName>.
Currently this appears as "sspp_0_sspp_csc" for a csc sub block to an
SSPP main block named "sspp_0". Because the name of the sub block defined
in the VIG_SBLK macro is "sspp_csc", the result is a redundant name. To
avoid this redundancy, remove the duplicate prefix "sspp".
Signed-off-by: Ryan McCann <[email protected]>
---
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
index c624b2cf0b35..836efa074a35 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
@@ -257,10 +257,10 @@ static const uint32_t wb2_formats[] = {
.maxdwnscale = MAX_DOWNSCALE_RATIO, \
.maxupscale = MAX_UPSCALE_RATIO, \
.smart_dma_priority = sdma_pri, \
- .scaler_blk = {.name = "sspp_scaler", \
+ .scaler_blk = {.name = "scaler", \
.id = qseed_ver, \
.base = 0xa00, .len = 0xa0,}, \
- .csc_blk = {.name = "sspp_csc", \
+ .csc_blk = {.name = "csc", \
.id = DPU_SSPP_CSC_10BIT, \
.base = 0x1a00, .len = 0x100,}, \
.format_list = plane_formats_yuv, \
@@ -275,10 +275,10 @@ static const uint32_t wb2_formats[] = {
.maxdwnscale = MAX_DOWNSCALE_RATIO, \
.maxupscale = MAX_UPSCALE_RATIO, \
.smart_dma_priority = sdma_pri, \
- .scaler_blk = {.name = "sspp_scaler", \
+ .scaler_blk = {.name = "scaler", \
.id = qseed_ver, \
.base = 0xa00, .len = 0xa0,}, \
- .csc_blk = {.name = "sspp_csc", \
+ .csc_blk = {.name = "csc", \
.id = DPU_SSPP_CSC_10BIT, \
.base = 0x1a00, .len = 0x100,}, \
.format_list = plane_formats_yuv, \
--
2.25.1