Make sure to decrement the runtime PM usage count before returning in
case RCG dynamic frequency switch initialisation fails.
Fixes: 2a541abd9837 ("clk: qcom: gcc-sc8280xp: Add runtime PM")
Cc: Konrad Dybcio <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
---
drivers/clk/qcom/gcc-sc8280xp.c | 14 +++++++++++---
1 file changed, 11 insertions(+), 3 deletions(-)
diff --git a/drivers/clk/qcom/gcc-sc8280xp.c b/drivers/clk/qcom/gcc-sc8280xp.c
index 1fb6ffac730c..ac6f8c0c1ccb 100644
--- a/drivers/clk/qcom/gcc-sc8280xp.c
+++ b/drivers/clk/qcom/gcc-sc8280xp.c
@@ -7539,8 +7539,8 @@ static int gcc_sc8280xp_probe(struct platform_device *pdev)
regmap = qcom_cc_map(pdev, &gcc_sc8280xp_desc);
if (IS_ERR(regmap)) {
- pm_runtime_put(&pdev->dev);
- return PTR_ERR(regmap);
+ ret = PTR_ERR(regmap);
+ goto err_put_rpm;
}
/*
@@ -7561,11 +7561,19 @@ static int gcc_sc8280xp_probe(struct platform_device *pdev)
ret = qcom_cc_register_rcg_dfs(regmap, gcc_dfs_clocks, ARRAY_SIZE(gcc_dfs_clocks));
if (ret)
- return ret;
+ goto err_put_rpm;
ret = qcom_cc_really_probe(pdev, &gcc_sc8280xp_desc, regmap);
+ if (ret)
+ goto err_put_rpm;
+
pm_runtime_put(&pdev->dev);
+ return 0;
+
+err_put_rpm:
+ pm_runtime_put_sync(&pdev->dev);
+
return ret;
}
--
2.41.0
On Tue, Jul 18, 2023 at 03:28:58PM +0200, Johan Hovold wrote:
> Make sure to decrement the runtime PM usage count before returning in
> case RCG dynamic frequency switch initialisation fails.
>
> Fixes: 2a541abd9837 ("clk: qcom: gcc-sc8280xp: Add runtime PM")
I noticed you merged these for 6.6 instead of 6.5 as I had expected.
Note that I left out the stable tag here as the offending patch was
merged as a fix for 6.5 and I specifically assumed this fixup would go
in as a fix for 6.5 as well.
> Cc: Konrad Dybcio <[email protected]>
> Signed-off-by: Johan Hovold <[email protected]>
Johan