Add support to pass Link down notification to Endpoint function driver
so that the LINK_DOWN event can be processed by the function.
Acked-by: Manivannan Sadhasivam <[email protected]>
Signed-off-by: Frank Li <[email protected]>
---
Change from v1 to v2
- move pci_epc_linkdown() after dev_dbg()
drivers/pci/controller/dwc/pci-layerscape-ep.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/pci/controller/dwc/pci-layerscape-ep.c b/drivers/pci/controller/dwc/pci-layerscape-ep.c
index de4c1758a6c3..e0969ff2ddf7 100644
--- a/drivers/pci/controller/dwc/pci-layerscape-ep.c
+++ b/drivers/pci/controller/dwc/pci-layerscape-ep.c
@@ -89,6 +89,7 @@ static irqreturn_t ls_pcie_ep_event_handler(int irq, void *dev_id)
dev_dbg(pci->dev, "Link up\n");
} else if (val & PEX_PF0_PME_MES_DR_LDD) {
dev_dbg(pci->dev, "Link down\n");
+ pci_epc_linkdown(pci->ep.epc);
} else if (val & PEX_PF0_PME_MES_DR_HRD) {
dev_dbg(pci->dev, "Hot reset\n");
}
--
2.34.1
From: Xiaowei Bao <[email protected]>
A workaround for the issue where the PCI Express Endpoint (EP) controller
loses the values of the Maximum Link Width and Supported Link Speed from
the Link Capabilities Register, which initially configured by the Reset
Configuration Word (RCW) during a link-down or hot reset event.
Fixes: a805770d8a22 ("PCI: layerscape: Add EP mode support")
Signed-off-by: Xiaowei Bao <[email protected]>
Signed-off-by: Hou Zhiqiang <[email protected]>
Signed-off-by: Frank Li <[email protected]>
---
change from v1 to v2:
- add comments at restore register
- add fixes tag
.../pci/controller/dwc/pci-layerscape-ep.c | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
diff --git a/drivers/pci/controller/dwc/pci-layerscape-ep.c b/drivers/pci/controller/dwc/pci-layerscape-ep.c
index e0969ff2ddf7..b1faf41a2fae 100644
--- a/drivers/pci/controller/dwc/pci-layerscape-ep.c
+++ b/drivers/pci/controller/dwc/pci-layerscape-ep.c
@@ -45,6 +45,7 @@ struct ls_pcie_ep {
struct pci_epc_features *ls_epc;
const struct ls_pcie_ep_drvdata *drvdata;
int irq;
+ u32 lnkcap;
bool big_endian;
};
@@ -73,6 +74,7 @@ static irqreturn_t ls_pcie_ep_event_handler(int irq, void *dev_id)
struct ls_pcie_ep *pcie = dev_id;
struct dw_pcie *pci = pcie->pci;
u32 val, cfg;
+ u8 offset;
val = ls_lut_readl(pcie, PEX_PF0_PME_MES_DR);
ls_lut_writel(pcie, PEX_PF0_PME_MES_DR, val);
@@ -81,6 +83,19 @@ static irqreturn_t ls_pcie_ep_event_handler(int irq, void *dev_id)
return IRQ_NONE;
if (val & PEX_PF0_PME_MES_DR_LUD) {
+
+ offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
+
+ /*
+ * The values of the Maximum Link Width and Supported Link
+ * Speed from the Link Capabilities Register will be lost
+ * during link down or hot reset. Restore initial value
+ * that configured by the Reset Configuration Word (RCW).
+ */
+ dw_pcie_dbi_ro_wr_en(pci);
+ dw_pcie_writel_dbi(pci, offset + PCI_EXP_LNKCAP, pcie->lnkcap);
+ dw_pcie_dbi_ro_wr_dis(pci);
+
cfg = ls_lut_readl(pcie, PEX_PF0_CONFIG);
cfg |= PEX_PF0_CFG_READY;
ls_lut_writel(pcie, PEX_PF0_CONFIG, cfg);
@@ -216,6 +231,7 @@ static int __init ls_pcie_ep_probe(struct platform_device *pdev)
struct ls_pcie_ep *pcie;
struct pci_epc_features *ls_epc;
struct resource *dbi_base;
+ u8 offset;
int ret;
pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
@@ -252,6 +268,9 @@ static int __init ls_pcie_ep_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, pcie);
+ offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
+ pcie->lnkcap = dw_pcie_readl_dbi(pci, offset + PCI_EXP_LNKCAP);
+
ret = dw_pcie_ep_init(&pci->ep);
if (ret)
return ret;
--
2.34.1
On Tue, Jul 18, 2023 at 02:21:42PM -0400, Frank Li wrote:
> From: Xiaowei Bao <[email protected]>
>
> A workaround for the issue where the PCI Express Endpoint (EP) controller
> loses the values of the Maximum Link Width and Supported Link Speed from
> the Link Capabilities Register, which initially configured by the Reset
> Configuration Word (RCW) during a link-down or hot reset event.
>
> Fixes: a805770d8a22 ("PCI: layerscape: Add EP mode support")
> Signed-off-by: Xiaowei Bao <[email protected]>
> Signed-off-by: Hou Zhiqiang <[email protected]>
> Signed-off-by: Frank Li <[email protected]>
Acked-by: Manivannan Sadhasivam <[email protected]>
- Mani
> ---
> change from v1 to v2:
> - add comments at restore register
> - add fixes tag
>
> .../pci/controller/dwc/pci-layerscape-ep.c | 19 +++++++++++++++++++
> 1 file changed, 19 insertions(+)
>
> diff --git a/drivers/pci/controller/dwc/pci-layerscape-ep.c b/drivers/pci/controller/dwc/pci-layerscape-ep.c
> index e0969ff2ddf7..b1faf41a2fae 100644
> --- a/drivers/pci/controller/dwc/pci-layerscape-ep.c
> +++ b/drivers/pci/controller/dwc/pci-layerscape-ep.c
> @@ -45,6 +45,7 @@ struct ls_pcie_ep {
> struct pci_epc_features *ls_epc;
> const struct ls_pcie_ep_drvdata *drvdata;
> int irq;
> + u32 lnkcap;
> bool big_endian;
> };
>
> @@ -73,6 +74,7 @@ static irqreturn_t ls_pcie_ep_event_handler(int irq, void *dev_id)
> struct ls_pcie_ep *pcie = dev_id;
> struct dw_pcie *pci = pcie->pci;
> u32 val, cfg;
> + u8 offset;
>
> val = ls_lut_readl(pcie, PEX_PF0_PME_MES_DR);
> ls_lut_writel(pcie, PEX_PF0_PME_MES_DR, val);
> @@ -81,6 +83,19 @@ static irqreturn_t ls_pcie_ep_event_handler(int irq, void *dev_id)
> return IRQ_NONE;
>
> if (val & PEX_PF0_PME_MES_DR_LUD) {
> +
> + offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
> +
> + /*
> + * The values of the Maximum Link Width and Supported Link
> + * Speed from the Link Capabilities Register will be lost
> + * during link down or hot reset. Restore initial value
> + * that configured by the Reset Configuration Word (RCW).
> + */
> + dw_pcie_dbi_ro_wr_en(pci);
> + dw_pcie_writel_dbi(pci, offset + PCI_EXP_LNKCAP, pcie->lnkcap);
> + dw_pcie_dbi_ro_wr_dis(pci);
> +
> cfg = ls_lut_readl(pcie, PEX_PF0_CONFIG);
> cfg |= PEX_PF0_CFG_READY;
> ls_lut_writel(pcie, PEX_PF0_CONFIG, cfg);
> @@ -216,6 +231,7 @@ static int __init ls_pcie_ep_probe(struct platform_device *pdev)
> struct ls_pcie_ep *pcie;
> struct pci_epc_features *ls_epc;
> struct resource *dbi_base;
> + u8 offset;
> int ret;
>
> pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
> @@ -252,6 +268,9 @@ static int __init ls_pcie_ep_probe(struct platform_device *pdev)
>
> platform_set_drvdata(pdev, pcie);
>
> + offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
> + pcie->lnkcap = dw_pcie_readl_dbi(pci, offset + PCI_EXP_LNKCAP);
> +
> ret = dw_pcie_ep_init(&pci->ep);
> if (ret)
> return ret;
> --
> 2.34.1
>
--
மணிவண்ணன் சதாசிவம்