Add some documentation of the userspace ABI for Guarded Control Stacks.
Signed-off-by: Mark Brown <[email protected]>
---
Documentation/arch/arm64/gcs.rst | 216 +++++++++++++++++++++++++++++++++++++
Documentation/arch/arm64/index.rst | 1 +
2 files changed, 217 insertions(+)
diff --git a/Documentation/arch/arm64/gcs.rst b/Documentation/arch/arm64/gcs.rst
new file mode 100644
index 000000000000..27ba72d27952
--- /dev/null
+++ b/Documentation/arch/arm64/gcs.rst
@@ -0,0 +1,216 @@
+===============================================
+Guarded Control Stack support for AArch64 Linux
+===============================================
+
+This document outlines briefly the interface provided to userspace by Linux in
+order to support use of the ARM Guarded Control Stack (GCS) feature.
+
+This is an outline of the most important features and issues only and not
+intended to be exhaustive.
+
+
+
+1. General
+-----------
+
+* GCS is an architecture feature intended to provide greater protection
+ against return oriented programming (ROP) attacks and to simplify the
+ implementation of features that need to collect stack traces such as
+ profiling.
+
+* When GCS is enabled a separate guarded control stack is maintained by the
+ PE which is writeable only through specific GCS operations. This
+ stores the call stack only, when a procedure call instruction is
+ performed the current PC is pushed onto the GCS and on RET the
+ address in the LR is verified against that on the top of the GCS.
+
+* When active current GCS pointer is stored in the system register
+ GCSPR_EL0. This is readable by userspace but can only be updated
+ via specific GCS instructions.
+
+* The architecture provides instructions for switching between guarded
+ control stacks with checks to ensure that the new stack is a valid
+ target for switching.
+
+* The functionality of GCS is similar to that provided by the x86 Shadow
+ Stack feature, due to sharing of userspace interfaces the ABI refers to
+ shadow stacks rather than GCS.
+
+* Support for GCS is reported to userspace via HWCAP2_GCS in the aux vector
+ AT_HWCAP2 entry.
+
+* GCS is enabled per thread. While there is support for disabling GCS
+ at runtime this should be done with great care.
+
+* GCS memory access faults are reported as normal memory access faults.
+
+* GCS specific errors (those reported with EC 0x2d) will be reported as
+ SIGSEGV with a si_code of SEGV_CPERR (control protection error).
+
+* GCS is supported only for AArch64.
+
+* On systems where GCS is supported GCSPR_EL0 is always readable by EL0
+ regardless of the GCS configuration for the thread.
+
+* The architecture supports enabling GCS without verifying that return values
+ in LR match those in the GCS, the LR will be ignored. This is not supported
+ by Linux.
+
+* EL0 GCS entries with bit 63 set are reserved for use, one such use is defined
+ below for signals and should be ignored when parsing the stack if not
+ understood.
+
+
+2. Enabling and disabling Guarded Control Stacks
+-------------------------------------------------
+
+* GCS is enabled and disabled for a thread via the PR_SET_SHADOW_STACK_STATUS
+ prctl(), this takes a single flags argument specifying which GCS features
+ should be used.
+
+* When set PR_SHADOW_STACK_ENABLE flag allocates a Guarded Control Stack for
+ and enables GCS for the thread, enabling the functionality controlled by
+ GCSPRE0_EL1.{nTR, RVCHKEN, PCRSEL}.
+
+* When set the PR_SHADOW_STACK_PUSH flag enables the functionality controlled
+ by GCSCRE0_EL1.PUSHMEn, allowing explicit GCS push and pops.
+
+* When set the PR_SHADOW_STACK_WRITE flag enables the functionality controlled
+ by GCSCRE0_EL1.STREn, allowing explicit stores to the Guarded Control Stack.
+
+* When set the PR_SHADOW_STACK_LOCK flag prevents any further configuration of
+ the GCS settings for the thread, further attempts to configure GCS will
+ return -EBUSY.
+
+* Any unknown flags will cause PR_SET_SHADOW_STACK_STATUS to return -EINVAL.
+
+* PR_SET_SHADOW_STACK_STATUS affects only the thread the called it, any
+ other running threads will be unaffected.
+
+* New threads inherit the GCS configuration of the thread that created them.
+
+* GCS is disabled on exec().
+
+* The current GCS configuration for a thread may be read with the
+ PR_GET_SHADOW_STACK_STATUS prctl(), this returns the same flags that
+ are passed to PR_SET_SHADOW_STACK_STATUS.
+
+* If GCS is disabled for a thread after having previously been enabled then
+ the stack will remain allocated for the lifetime of the thread. At present
+ any attempt to reenable GCS for the thread will be rejected, this may be
+ revisited in future.
+
+* It should be noted that since enabling GCS will result in GCS becoming
+ active immediately it is not normally possible to return from the function
+ that invoked the prctl() that enabled GCS. It is expected that the normal
+ usage will be that GCS is enabled very early in execution of a program.
+
+
+
+3. Allocation of Guarded Control Stacks
+----------------------------------------
+
+* When GCS is enabled for a thread a new Guarded Control Stack will be
+ allocated for it of size RLIMIT_STACK / 2 or 2 gigabytes, whichever is
+ smaller.
+
+* When a new thread is created by a thread which has GCS enabled then a
+ new Guarded Control Stack will be allocated for the new thread with
+ half the size of the standard stack.
+
+* When a stack is allocated by enabling GCS or during thread creation then
+ the top 8 bytes of the stack will be initialised to 0 and GCSPR_EL0 will
+ be set to point to the address of this 0 value, this can be used to
+ detect the top of the stack.
+
+* Additional Guarded Control Stacks can be allocated using the
+ map_shadow_stack() system call.
+
+* Stacks allocated using map_shadow_stack() will have the top 8 bytes
+ set to 0 and the 8 bytes below that initialised with an architecturally
+ valid GCS cap value, this allows switching to these stacks using the
+ stack switch instructions provided by the architecture.
+
+* When GCS is disabled for a thread the Guarded Control Stack initially
+ allocated for that thread will be freed. Note carefully that if the
+ stack has been switched this may not be the stack currently in use by
+ the thread.
+
+
+4. Signal handling
+--------------------
+
+* A new signal frame record gcs_context encodes the current GCS mode and
+ pointer for the interrupted context on signal delivery. This will always
+ be present on systems that support GCS.
+
+* The record contains a flag field which reports the current GCS configuration
+ for the interrupted context as PR_GET_SHADOW_STACK_STATUS would.
+
+* The signal handler is run with the same GCS configuration as the interrupted
+ context.
+
+* When GCS is enabled for the interrupted thread a signal handling specific
+ GCS cap token will be written to the GCS, this is an architectural GCS cap
+ token with bit 63 set. The GCSPR_EL0 reported in the signal frame will
+ point to this cap token.
+
+* The signal handler will use the same GCS as the interrupted context.
+
+* When GCS is enabled on signal entry a frame with the address of the signal
+ return handler will be pushed onto the GCS, allowing return from the signal
+ handler via RET as normal. This will not be reported in the gcs_context in
+ the signal frame.
+
+
+5. Signal return
+-----------------
+
+When returning from a signal handler:
+
+* If there is a gcs_context record in the signal frame then the GCS flags
+ and GCSPR_EL0 will be restored from that context prior to further
+ validation.
+
+* If there is no gcs_context record in the signal frame then the GCS
+ configuration will be unchanged.
+
+* If GCS is enabled on return from a signal handler then GCSPR_EL0 must
+ point to a valid GCS signal cap record, this will be popped from the
+ GCS prior to signal return.
+
+* If the GCS configuration is locked when returning from a signal then any
+ attempt to change the GCS configuration will be treated as an error. This
+ is true even if GCS was not enabled prior to signal entry.
+
+* GCS may be disabled via signal return but any attempt to enable GCS via
+ signal return will be rejected.
+
+
+7. ptrace extensions
+---------------------
+
+* A new regset NT_ARM_GCS is defined for use with PTRACE_GETREGSET and
+ PTRACE_SETREGSET.
+
+* Due to the complexity surrounding allocation and deallocation of stakcs and
+ lack of practical application changes to the GCS configuration via ptrace
+ are not supported.
+
+
+
+8. ELF coredump extensions
+---------------------------
+
+* NT_ARM_GCS notes will be added to each coredump for each thread of the
+ dumped process. The contents will be equivalent to the data that would
+ have been read if a PTRACE_GETREGSET of the corresponding type were
+ executed for each thread when the coredump was generated.
+
+
+
+9. /proc extensions
+--------------------
+
+* Guarded Control Stack pages will include "ss" in their VmFlags in
+ /proc/<pid>/smaps.
diff --git a/Documentation/arch/arm64/index.rst b/Documentation/arch/arm64/index.rst
index d08e924204bf..dcf3ee3eb8c0 100644
--- a/Documentation/arch/arm64/index.rst
+++ b/Documentation/arch/arm64/index.rst
@@ -14,6 +14,7 @@ ARM64 Architecture
booting
cpu-feature-registers
elf_hwcaps
+ gcs
hugetlbpage
kdump
legacy_instructions
--
2.30.2
On Sun, Jul 16, 2023 at 10:51:00PM +0100, Mark Brown wrote:
> Add some documentation of the userspace ABI for Guarded Control Stacks.
>
> Signed-off-by: Mark Brown <[email protected]>
> ---
> Documentation/arch/arm64/gcs.rst | 216 +++++++++++++++++++++++++++++++++++++
> Documentation/arch/arm64/index.rst | 1 +
> 2 files changed, 217 insertions(+)
>
> diff --git a/Documentation/arch/arm64/gcs.rst b/Documentation/arch/arm64/gcs.rst
> new file mode 100644
> index 000000000000..27ba72d27952
> --- /dev/null
> +++ b/Documentation/arch/arm64/gcs.rst
> @@ -0,0 +1,216 @@
> +===============================================
> +Guarded Control Stack support for AArch64 Linux
> +===============================================
> +
> +This document outlines briefly the interface provided to userspace by Linux in
> +order to support use of the ARM Guarded Control Stack (GCS) feature.
> +
> +This is an outline of the most important features and issues only and not
> +intended to be exhaustive.
> +
> +
> +
> +1. General
> +-----------
> +
> +* GCS is an architecture feature intended to provide greater protection
> + against return oriented programming (ROP) attacks and to simplify the
> + implementation of features that need to collect stack traces such as
> + profiling.
> +
> +* When GCS is enabled a separate guarded control stack is maintained by the
> + PE which is writeable only through specific GCS operations. This
> + stores the call stack only, when a procedure call instruction is
> + performed the current PC is pushed onto the GCS and on RET the
> + address in the LR is verified against that on the top of the GCS.
> +
> +* When active current GCS pointer is stored in the system register
> + GCSPR_EL0. This is readable by userspace but can only be updated
> + via specific GCS instructions.
> +
> +* The architecture provides instructions for switching between guarded
> + control stacks with checks to ensure that the new stack is a valid
> + target for switching.
> +
> +* The functionality of GCS is similar to that provided by the x86 Shadow
> + Stack feature, due to sharing of userspace interfaces the ABI refers to
> + shadow stacks rather than GCS.
> +
> +* Support for GCS is reported to userspace via HWCAP2_GCS in the aux vector
> + AT_HWCAP2 entry.
> +
> +* GCS is enabled per thread. While there is support for disabling GCS
> + at runtime this should be done with great care.
> +
> +* GCS memory access faults are reported as normal memory access faults.
> +
> +* GCS specific errors (those reported with EC 0x2d) will be reported as
> + SIGSEGV with a si_code of SEGV_CPERR (control protection error).
> +
> +* GCS is supported only for AArch64.
> +
> +* On systems where GCS is supported GCSPR_EL0 is always readable by EL0
> + regardless of the GCS configuration for the thread.
> +
> +* The architecture supports enabling GCS without verifying that return values
> + in LR match those in the GCS, the LR will be ignored. This is not supported
> + by Linux.
> +
> +* EL0 GCS entries with bit 63 set are reserved for use, one such use is defined
> + below for signals and should be ignored when parsing the stack if not
> + understood.
> +
> +
> +2. Enabling and disabling Guarded Control Stacks
> +-------------------------------------------------
> +
> +* GCS is enabled and disabled for a thread via the PR_SET_SHADOW_STACK_STATUS
> + prctl(), this takes a single flags argument specifying which GCS features
> + should be used.
> +
> +* When set PR_SHADOW_STACK_ENABLE flag allocates a Guarded Control Stack for
'for' here looks excessive ^
> + and enables GCS for the thread, enabling the functionality controlled by
> + GCSPRE0_EL1.{nTR, RVCHKEN, PCRSEL}.
> +
> +* When set the PR_SHADOW_STACK_PUSH flag enables the functionality controlled
> + by GCSCRE0_EL1.PUSHMEn, allowing explicit GCS push and pops.
> +
> +* When set the PR_SHADOW_STACK_WRITE flag enables the functionality controlled
> + by GCSCRE0_EL1.STREn, allowing explicit stores to the Guarded Control Stack.
> +
> +* When set the PR_SHADOW_STACK_LOCK flag prevents any further configuration of
> + the GCS settings for the thread, further attempts to configure GCS will
> + return -EBUSY.
> +
> +* Any unknown flags will cause PR_SET_SHADOW_STACK_STATUS to return -EINVAL.
> +
> +* PR_SET_SHADOW_STACK_STATUS affects only the thread the called it, any
> + other running threads will be unaffected.
> +
> +* New threads inherit the GCS configuration of the thread that created them.
> +
> +* GCS is disabled on exec().
> +
> +* The current GCS configuration for a thread may be read with the
> + PR_GET_SHADOW_STACK_STATUS prctl(), this returns the same flags that
> + are passed to PR_SET_SHADOW_STACK_STATUS.
> +
> +* If GCS is disabled for a thread after having previously been enabled then
> + the stack will remain allocated for the lifetime of the thread. At present
> + any attempt to reenable GCS for the thread will be rejected, this may be
> + revisited in future.
> +
> +* It should be noted that since enabling GCS will result in GCS becoming
> + active immediately it is not normally possible to return from the function
> + that invoked the prctl() that enabled GCS. It is expected that the normal
> + usage will be that GCS is enabled very early in execution of a program.
> +
> +
> +
> +3. Allocation of Guarded Control Stacks
> +----------------------------------------
> +
> +* When GCS is enabled for a thread a new Guarded Control Stack will be
> + allocated for it of size RLIMIT_STACK / 2 or 2 gigabytes, whichever is
> + smaller.
> +
> +* When a new thread is created by a thread which has GCS enabled then a
> + new Guarded Control Stack will be allocated for the new thread with
> + half the size of the standard stack.
> +
> +* When a stack is allocated by enabling GCS or during thread creation then
> + the top 8 bytes of the stack will be initialised to 0 and GCSPR_EL0 will
> + be set to point to the address of this 0 value, this can be used to
> + detect the top of the stack.
> +
> +* Additional Guarded Control Stacks can be allocated using the
> + map_shadow_stack() system call.
> +
> +* Stacks allocated using map_shadow_stack() will have the top 8 bytes
> + set to 0 and the 8 bytes below that initialised with an architecturally
> + valid GCS cap value, this allows switching to these stacks using the
> + stack switch instructions provided by the architecture.
> +
> +* When GCS is disabled for a thread the Guarded Control Stack initially
> + allocated for that thread will be freed. Note carefully that if the
> + stack has been switched this may not be the stack currently in use by
> + the thread.
> +
> +
> +4. Signal handling
> +--------------------
> +
> +* A new signal frame record gcs_context encodes the current GCS mode and
> + pointer for the interrupted context on signal delivery. This will always
> + be present on systems that support GCS.
> +
> +* The record contains a flag field which reports the current GCS configuration
> + for the interrupted context as PR_GET_SHADOW_STACK_STATUS would.
> +
> +* The signal handler is run with the same GCS configuration as the interrupted
> + context.
> +
> +* When GCS is enabled for the interrupted thread a signal handling specific
> + GCS cap token will be written to the GCS, this is an architectural GCS cap
> + token with bit 63 set. The GCSPR_EL0 reported in the signal frame will
> + point to this cap token.
> +
> +* The signal handler will use the same GCS as the interrupted context.
> +
> +* When GCS is enabled on signal entry a frame with the address of the signal
> + return handler will be pushed onto the GCS, allowing return from the signal
> + handler via RET as normal. This will not be reported in the gcs_context in
> + the signal frame.
> +
> +
> +5. Signal return
> +-----------------
> +
> +When returning from a signal handler:
> +
> +* If there is a gcs_context record in the signal frame then the GCS flags
> + and GCSPR_EL0 will be restored from that context prior to further
> + validation.
> +
> +* If there is no gcs_context record in the signal frame then the GCS
> + configuration will be unchanged.
> +
> +* If GCS is enabled on return from a signal handler then GCSPR_EL0 must
> + point to a valid GCS signal cap record, this will be popped from the
> + GCS prior to signal return.
> +
> +* If the GCS configuration is locked when returning from a signal then any
> + attempt to change the GCS configuration will be treated as an error. This
> + is true even if GCS was not enabled prior to signal entry.
> +
> +* GCS may be disabled via signal return but any attempt to enable GCS via
> + signal return will be rejected.
> +
> +
> +7. ptrace extensions
> +---------------------
> +
> +* A new regset NT_ARM_GCS is defined for use with PTRACE_GETREGSET and
> + PTRACE_SETREGSET.
> +
> +* Due to the complexity surrounding allocation and deallocation of stakcs and
> + lack of practical application changes to the GCS configuration via ptrace
> + are not supported.
On x86 CRIU needed to be able to temporarily unlock shadow stack features
to recreate the shadow stack of the thread being restored. I presume CRIU
will need something like that on arm64 as well.
> +
> +
> +
> +8. ELF coredump extensions
> +---------------------------
> +
> +* NT_ARM_GCS notes will be added to each coredump for each thread of the
> + dumped process. The contents will be equivalent to the data that would
> + have been read if a PTRACE_GETREGSET of the corresponding type were
> + executed for each thread when the coredump was generated.
> +
> +
> +
> +9. /proc extensions
> +--------------------
> +
> +* Guarded Control Stack pages will include "ss" in their VmFlags in
> + /proc/<pid>/smaps.
> diff --git a/Documentation/arch/arm64/index.rst b/Documentation/arch/arm64/index.rst
> index d08e924204bf..dcf3ee3eb8c0 100644
> --- a/Documentation/arch/arm64/index.rst
> +++ b/Documentation/arch/arm64/index.rst
> @@ -14,6 +14,7 @@ ARM64 Architecture
> booting
> cpu-feature-registers
> elf_hwcaps
> + gcs
> hugetlbpage
> kdump
> legacy_instructions
>
> --
> 2.30.2
>
>
--
Sincerely yours,
Mike.
On Wed, Jul 19, 2023 at 02:44:37PM +0300, Mike Rapoport wrote:
> On Sun, Jul 16, 2023 at 10:51:00PM +0100, Mark Brown wrote:
> > +* When set PR_SHADOW_STACK_ENABLE flag allocates a Guarded Control Stack for
>
> 'for' here looks excessive ^
> > + and enables GCS for the thread, enabling the functionality controlled by
> > + GCSPRE0_EL1.{nTR, RVCHKEN, PCRSEL}.
It does scan fine to me as a native speaker.
> > +7. ptrace extensions
> > +---------------------
> > +
> > +* A new regset NT_ARM_GCS is defined for use with PTRACE_GETREGSET and
> > + PTRACE_SETREGSET.
> > +
> > +* Due to the complexity surrounding allocation and deallocation of stakcs and
> > + lack of practical application changes to the GCS configuration via ptrace
> > + are not supported.
> On x86 CRIU needed to be able to temporarily unlock shadow stack features
> to recreate the shadow stack of the thread being restored. I presume CRIU
> will need something like that on arm64 as well.
It would be good to understand why and what exactly is needed here.
I'm guessing the main thing would be stores? It's relatively easy to
add features later, I think I'll just add support for everything except
enable just now.
On Wed, Jul 19, 2023 at 02:25:38PM +0100, Mark Brown wrote:
> On Wed, Jul 19, 2023 at 02:44:37PM +0300, Mike Rapoport wrote:
> > On Sun, Jul 16, 2023 at 10:51:00PM +0100, Mark Brown wrote:
>
> > > +7. ptrace extensions
> > > +---------------------
> > > +
> > > +* A new regset NT_ARM_GCS is defined for use with PTRACE_GETREGSET and
> > > + PTRACE_SETREGSET.
> > > +
> > > +* Due to the complexity surrounding allocation and deallocation of stakcs and
> > > + lack of practical application changes to the GCS configuration via ptrace
> > > + are not supported.
>
> > On x86 CRIU needed to be able to temporarily unlock shadow stack features
> > to recreate the shadow stack of the thread being restored. I presume CRIU
> > will need something like that on arm64 as well.
>
> It would be good to understand why and what exactly is needed here.
> I'm guessing the main thing would be stores?
Yes, CRIU has to modify the shadow stack.
CRIU uses sigreturn directly, so we had to update the shadow stack before
calling sigreturn.
On x86 ptrace(POKEDATA) and update of the shadow stack pointer were enough,
but it looks like ptrace(POKEDATA) won't work on arm64.
Another place that requires shadow stack modifications is the restore of
the shadow stack from the checkpoint. On x86 we had to enable WRSS and that
required to temporarily unlock the features.
> It's relatively easy to add features later, I think I'll just add support
> for everything except enable just now.
Fair enough :)
--
Sincerely yours,
Mike.