Always call cs_dsp_power_up() and cs_dsp_run() in
cs35l56_hda_fw_load() even if there aren't any firmware files
to download. Also, if there aren't any firmware files to
download there is no need to do cs35l56_firmware_shutdown() and
cs35l56_system_reset().
If there aren't any firmware files there's no need to write
anything to the CS35L56 registers to make it work - it will
already be running the ROM firmware. So it's not strictly
necessary to start cs_dsp.
But it's perfectly ok to call cs_dsp_power_up() and
cs_dsp_run() without downloading any firmware. This avoids
having to support a state where audio is playing but cs_dsp
is not running.
Signed-off-by: Richard Fitzgerald <[email protected]>
---
sound/pci/hda/cs35l56_hda.c | 10 +++-------
1 file changed, 3 insertions(+), 7 deletions(-)
diff --git a/sound/pci/hda/cs35l56_hda.c b/sound/pci/hda/cs35l56_hda.c
index b6b8cb21da75..2870f82bfa45 100644
--- a/sound/pci/hda/cs35l56_hda.c
+++ b/sound/pci/hda/cs35l56_hda.c
@@ -536,10 +536,6 @@ static int cs35l56_hda_fw_load(struct cs35l56_hda *cs35l56)
cs35l56_hda_request_firmware_files(cs35l56, &wmfw_firmware, &wmfw_filename,
&coeff_firmware, &coeff_filename);
- /* Nothing to do - no firmware files were found to download */
- if (!wmfw_filename && !coeff_filename)
- return 0;
-
mutex_lock(&cs35l56->base.irq_lock);
pm_runtime_get_sync(cs35l56->base.dev);
@@ -549,7 +545,7 @@ static int cs35l56_hda_fw_load(struct cs35l56_hda *cs35l56)
* shutdown the firmware to apply them and can use the lower cost
* reinit sequence instead.
*/
- if (!cs35l56->base.secured) {
+ if (!cs35l56->base.secured && (wmfw_firmware || coeff_firmware)) {
ret = cs35l56_firmware_shutdown(&cs35l56->base);
if (ret)
goto err;
@@ -572,8 +568,8 @@ static int cs35l56_hda_fw_load(struct cs35l56_hda *cs35l56)
ret = cs35l56_mbox_send(&cs35l56->base, CS35L56_MBOX_CMD_AUDIO_REINIT);
if (ret)
goto err;
- } else {
- /* Reset the device and wait for it to boot */
+ } else if (wmfw_firmware || coeff_firmware) {
+ /* If we downloaded firmware, reset the device and wait for it to boot */
cs35l56_system_reset(&cs35l56->base, false);
regcache_mark_dirty(cs35l56->base.regmap);
ret = cs35l56_wait_for_firmware_boot(&cs35l56->base);
--
2.30.2